|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: United States Specification Material: Aluminum Alloy Color: Black Model: 12HP Horsepower Long Axis Displacement: 169CC Gear Ratio: 2.08 (27:13) Number of Cylinders: ... more2 Speed: 4500-5500RPM Gear: F-N-R Refueling Method: 92 Unleaded Gasoline is Recommended Maximum Power: 8.8kw Oil Tank Capacity: 24L/6.34gal Endurance: 5-6h Max. Load-bearing Capacity: 1000kg/2204lbs Ignition System: CDI Cooling System: Water Cooling Control System: Tiller Control Start System: Manual Start Suitable Stern Plate Height: 45cm-55cm/17.7*21.7in Propeller Specification: 23.5cm/9.25in (Length) * 20.3cm/8in (Diameter) Cylinder Diameter * Stroke: 50mm/2in * 43mm/1.7in Recommended Engine Oil: 2 Stroke Engine Oil Mixing Ratio: Fuel: Oil = 50:1 Trim and Tilt System: Manual Tilt Net Weight: 32kg/70.5lbs Gross Wei.
Buy It Now
Free Shipping Condition: Used Location: China Brand REXROTH MPN VT11024-16 Model VT11024-16 UPC Does not apply.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1 x SFU1605 Sliding Table. the Sliding Table Is Convenient and Easy in Use, Can Be Directly Fold Cross Slide, Gantry Sliding Table, 3-Axis, 4-Axis, Multi-axis ... moreCombination in Use. the Sliding Table Is Equipped with Hand Wheel, and Lock.
Buy It Now
$40.00 Shipping Condition: New Location: United States Part No.: WT 57STH115-0304B(57BYGH115-003B) dual shafts. 4.0A phase current. Hording torque when DQ542MA run under high speed is also significantly higher ... morethan the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Compared with the traditional bearing with poor accuracy, poor stability, and large friction, our small and light bearing can relieve your ... moretroubles. Made of high-quality steel, the bearing is resistant to wear and deformation, so you can use it for a long time. In addition, good performance can bring you smoother and more stable movement, so as to improve your work efficiency and bring you a better experience. Key Features High-end Material: The ball bearing with precise steel balls inside is mainly made of steel, which is wear-resistant, durable, and not easy to deform. Therefore, you can use it for a long time without frequent replacement, which can save your use cost to a certain extent. Exquisite Workmanship: The ball bearing mainly adopts polishing technology, which ma.
Buy It Now
$4.00 Shipping Condition: New Location: Chino, United States L Reduction ratio: 1:25（25K）. l 15W Gear Motor:70mm 70mm 134mm, Axis Length 30mm. l 1 X governor. Reduction ratio1:25（25K）. l 1 X Electric machinery. ... moreSpeed ratio 1: 25 ( 54 rpm/min), gearbox without gearbox is 1350 rpm /min.
Buy It Now
Free Shipping Condition: New Location: China 2 Axis dro LCD screen RPM. 2 pcs magnetic scale DRO. 【LCD & PREMIUM QUALITY】 - The dro for lathe features LCD screen. The display effect is relatively ... morenatural. Digital Readout. ●Coordinate Display:2,3,4,5Axis.
Buy It Now
$3.50 Shipping Condition: New Location: China Chopping Frequency: 20KHZ. Max Drive Current: 4A. High-speed optocoupler signal isolation input. Electrical input signal is TTL compatible.
Buy It Now
Free Shipping Condition: New Location: China Z‑axes fine‑tuningsliding table possess stable structure, excellent performance and long service life. If you do not receive our reply within 48 hours, ... morepls. If you are satisfied with our service, pls.
Buy It Now
$8.80 Shipping Condition: New Location: Saint Louis, United States Up for sale is a NEW In Factory Box Mitsubishi PLC Positioning Unit Part Number QD70D4. There are 2 pictured and we have 2 currently available.
Buy It Now
Free Shipping Condition: New Location: United States 4 Axis CNC 3.5A TB6560 Stepper Motor Driver Board Controller F Engraving Machine. Click To Enlarge CNC stepper motor driver board 96560A V1 adopts the ... morenew chip TB6560AHQ of TOSHIBA. The max ouput current can reach to 3.5A, this driver board can drive the 2-phase or 4-phase stepper motor whose current is less than 3A. The advantages of the TB6560AHQ chip: The vibration of the motor is small and low noise: because of the 2/8/16 resolution can satisfy the different speed. Flush type low heat: The area of the chip can support itself to cool when the current is low Supports a lot of stepper motors The advantages in the high-speed running condition board might be made partly out of recycled parts. Because of the environmental protection Features: 4-wire 0-3.5A(normally 3A. The 3.5A is the peak current)can be regulated rate current output, bipolar stepper motor driver Standard parallel port. Supports Mach 2, KCAM 4 etc. Optical isolated(IO) and DCDC power isolated to protect the PC parallel port and other equipments Limit and emergency stop port( standard DB9 port) 4 working modes: mixed mode. Fast mode, slow mode, standard mode 4-resolution: 1 1/2 1/4 1/16 12-36V single power input uses the switch power chip as the 5V power supply. Stable and low heat Adopts RC + 7414 auto semi-flow The relay output can control the main axis 5th axis extension control port Packing list: 1* 4 Axis CNC TB6560 Stepper Motor Driver Board 1* DB25 Parallel Male- F emale Cable 4* Connect Terminal A997A NOTE We try our best to make every transaction perfectly, just for winning your F ive-Star rating. If you have any dissatisfaction. Please contact us. We will give you the most satisfactory results. PLEASE don't leave a neutral or negative easily. Shipping Item will be shipped within 24 hours on payment received from Hong Kong using Airmail. Only shipped to buyer's PayPal address. Please confirm with your PayPal address before you bid. Delivery time depends on destination and other factors. It may takes up to 30 business days. O
Buy It Now
Free Shipping Condition: New Location: Chino, United States The Simple Structure and Smooth Surface Make It Very Easy to Clean. Gross Weight: 2.2kg/4.8 Lbs. Effortless to Clean : the Smooth Surface and Simple Structure ... moreAllow You to Easily Clean the Dust with a Dry Rag.
Buy It Now
Free Shipping Condition: Used Location: Delta, United States Category:Robot Parts & Accessories. Welding and Cutting. Heating and Cooling. Cooling Fans. Gear Reducers. Solenoid Valves. Solenoid Coils. Shock Absorbers.
Buy It Now
Free Shipping Condition: Used Location: China Brand Oriental MPN EZT1 Model EZT1.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Linear Actuator. For more details of the Linear Actuators. Engineered to hold up to 1000 Watts of solar panels. With strong wind protection mode (Wind ... morespeed sensor is required);. Can connect limit switch;.
Buy It Now
Free Shipping Condition: New Location: San Leandro, United States Linear Actuator. For more details of the Linear Actuators. Engineered to hold up to 1000 Watts of solar panels. Can connect limit switch;. Max Pull Load. ... moreBuilt-in Limit Switch. Max load Current. Max Load Current.
Buy It Now
Free Shipping Condition: New Location: Canada
Buy It Now
Free Shipping Condition: New Location: Chino, United States Therefore, it is verywear-resistant. You don't have to buy an extra wrench. High Precision: Each part of this Z-axis stroke is carefully machined for ... morea compact structure and high precision. This item is made of high-quality and hard aluminum material, which is more durable and lasts longer.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Multiple Functions: Support automatic, manual, serial port communication control, can control 42/57 two-phase stepping motors directly or with stepping ... moremotor drivers, it is a dedicated operation control module for single-axis stepping motors. A variety of fixed operation modes are built into the module, and the user can quickly select the appropriate motion trajectory 9 Modes: The parameters of each mode can be set in advance, with the use of buttons, it is suitable for almost all occasions, with multiple modes such as forward/reverse/delay/cycle/self-locking/no lock/speed Save Function: distance/speed/delay/cycle times can save the settings after power off. It can run independently as a module or be used with other systems.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Item Description Feature: 1. Chip: MPU-6050 2. Power supply: 3v-5V 3. Gyroscope range: + 250 500 1000 2000 °/ s 4. Acceleration range: ± 2 ± ... more4 ± 8 ± 16 g 5. Communication: Standard IIC communication agreement 6. Chip built-in 16 bit AD converter. 16 bits of data output 7. Pin Pitch 2.54 mm 8.SIZE: 20.3mm x 15.6mm Download Documents: download Payment We accept PayPal ONLY. Shipping Policy US buyer please Select the ePacket shipping. It will be faster! thank you! Your goods will be shipped within 1 days after cleared PayPal payment. If the total amount is less than $25. Your goods will be shipped via airmails(i.e. HongKong Airmail or Singapore Airmail) If you would like to use trackable airmail. Please leave a message when making the payment via PayPal. We will send you another PayPal invoice of $2 for the extra trackable airmail expense. If the total amount is more than $25. Your goods will be shipped via trackable airmail(i.e. HongKong Registered Airmail or Singapore Registered Airmail) Expedited shipping services(e.g. DHL. FedEx, UPS) are available. Please contact us via eBay messages for pricing. Your goods will ONLY be shipped to your PayPal address. Before you place an order/bid. Please edit/add your PayPal address if it is not correct. If by any chance that your goods is held by the Customs. It is the buyer's responsibility to clear the Customs. The Customs office may be far away from your location. Please take that into consideration. By default. We declare the real value to the Customs. If you have any requirement on declaration, please leave a message when making the payment via PayPal. Destination Country, Shipping time statistics via HongKong Airmail, 5-10 days, 11-15 days, 16-20 days, 21-25 days, 26-30 days, more than 35 days, United States, 5.9% 49.3% 30.2% 9.7% 4.9% Full refund or Reshipping[1] United Kingdom, 10.2% 62.9% 18.7% 3.7% 4.5% Australia/Ireland, 11.6% 59.8% 14.0% 7.5% 7.1% France/Netherlands, 5.3% 28.7% 48.9% 9.9% 7.2% Germany/Italy/Israel, 8.2% 22.5% 32.7% 2
Buy It Now
Free Shipping Condition: New Location: China Brand Sanyo MPN STK403-070 Model STK403-070 UPC Does not apply.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Part No: 4000A. The physical condition is good, but there are signs of previous use and handling. 4000-60002, AXIS, Y-AXIS. 4000-60002, AXIS, Y-AXIS, ... moreTTL/RH. 4000-60002, AXIS, Z-AXIS, TTL/RH. 4000-60043-00, 5-Axis Motherboard.
Buy It Now
Free Shipping Condition: New Location: China We have specilized in all kinds of PLC/CNC products for more than 14 years. 💯 Notice：.
Buy It Now
$7.21 Shipping Condition: New Location: Watsonville, United States JM38510/01401BJA Single General Purpose 24 Pin Dip. AM27C1024-150JC EPROM, 64K x 16, 44 Pin, Plastic, PLCC. PICK UP OPTION. Buy now and save!
Buy It Now
$2.99 Shipping Condition: New Location: China Simple Assembly, Convenient Interchange, Cylindrical Optical Axis, Economical. ● Negative Shaft Tolerance: ±0.02 to ±0.05mm. ● Material: C45 Carbon Steel.
Buy It Now
$5.00 Shipping Condition: New Location: China XYZ 3-Axes DOF can be adjusted, internal cross rail, high precision, strong load bearing. Table Size: Approx. 90 x 90mm / 3.5 x 3.5in. It adopts high-strength ... morebearing steel cross guide rail, which has strong bearing capacity, stable work and better wear resistance.
Buy It Now
Free Shipping Condition: New Location: United States Motor noise optimisation function. Output peak current 4.0A. 5.H-bridge bipolar constant current driver. Automatic half-current to reduce heat.
Buy It Now
Free Shipping Condition: New Location: China Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor. 4 general-purpose inputs, you can connect the limit switch, ... moreestop switch, probe switch, back to zero and other device.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States New Sealed Allen Bradley 2198-H070-ERS A Kinetix 5500 7.013 Servo Drive. This depends on the warehouse's schedule. 2479.0 USD. 6755.0 USD. 1655.5 USD. ... more1665.0 USD. You may also like. hipping cost.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States
Buy It Now
$26.59 Shipping Condition: Neu Location: China We offer the state of the art products, which include motors,drives,switch,modules,CUP,electronic accessories,motherboards, custom built computers, refurbished ... moredesktops, refurbished laptops, monitors, printers, desktop & laptop accessories/parts & much more!! If you need any kind of items, please contact us directly.We will give you more competitive prices.
Buy It Now
Free Shipping Condition: New Location: Chino, United States BI-ZMLJM-348 12NM 3Axis Nema34 Closed Loop Stepper Motor Drive Features: HBS86H adopts the latest dedicated motor control DSP chip and vector closed-loop ... morecontrol technology to completely overcome the problem of open-loop stepping motor lost step, and at the same time significantly improve the high-speed performance of the motor, reduce motor heating and reduce motor vibration, improve machining speed and accuracy, and reduce Machine energy consumption. When the motor is continuously overloaded, the driver will output an alarm signal in time, which has the same reliability as the AC servo system. HBS86H is equipped with 86 series closed-loop stepping motors, which is convenient for traditional stepping system upgrades. The cost is only 50% of the AC servo system. Specification: Driver Mode.
Buy It Now
Free Shipping Condition: New Location: Laporte, United States Here are some magnetic linear encoder kits. We have magnetic linear encoder scale tape and compatible 5 micron read heads. The heads provide industry ... morestandard RS-422 incremental outputs with index for 99% of the DRO's on the market (also compatible with TTL DRO's. The complete kits include mounting extrusion, stainless steel faced magnetic encoder tape, mounting feet, and an MCR500AS read head with 3 meter metal jacketed communication cable. The mounting extrusions are one piece up to 5 meters in length (please note, these will need to be cut into smaller sections to ship small package, contact us if this is not an option). The extrusion also has the option for a second stainless steel protective strip in front of the read tape. This provides an extra Due to the high variety of DRO's, we have opted not to include an DRO's with these kits.
Buy It Now
$15.00 Shipping Condition: Used Location: Reidsville, United States KINETIX 6000 SERVO DRIVE AXIS MODULE 400/460V 4A. ALLEN BRADLEY 2094-BMP5-S SER B.
Buy It Now
Free Shipping Condition: Used Location: 구로구, South Korea Manufacturer : MISUMI / SURUGA SEIKI. Lead(Pitch - distance by 1 rotation) = 1 mm. Table height(mm)20. Model Number : XMSG413-LA24-CS. Table Length(mm)40. ... moreTable width(mm)40. It was removed from machine of working good condition.
Buy It Now
Condition: Used Location: Mountainair, United States There are two primary sections to the assembly. The upper section is the "optics positioning unit" with x, y, z and objective axis. The optics section ... morelooks to have about 2" of travel in x, y & z. The 4'th axis of this section rotates an objective nose-piece about an optical 90 degree mirror or prism to position different power objective lenses.
Buy It Now
Free Shipping Condition: New Location: United States (1)HWT101 Module 1 PCS. High Performance Rock-solid data output: Military-grade Z-axis Angle data output. Pad Pitch: Up/down100mil(2.54mm)Left/Right 600mil(15.24mm). ... moreManufacturer model:Crystal Gyroscope.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Moving direction X,Y, Z Axis X,Y, Z Axis X,Y, Z Axis. Sliding Table. Jewelry & Watches. Travel XY:±6.5mm XY:±6.5mm XY:±12.5mm. Rosin Heat Press Machine. ... moreVFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw, linear guide.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Description Features: 1. Ball screw type: 1605 2. Ball screw accuracy: C7 3. Stepper motor: not included.（provide 57 stepper motor base） 4. Repeat ... morepositioning accuracy: ± 0.05mm 5. Mobile panel size: 60mm * 115mm 6. Sliding table height: 66mm, width: 93mm, base thickness: 11mm 7.Material: Aviation Aluminum 6061 8.The sliding table is convenient and easy in use, can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use. 9.The sliding table is equipped with 57 stepper motor Base（57 Stepper motor is not included） Package included : 1 x SFU1605 Sliding Table 1 x57 Stepper motor Base (Note : The stepper motor is not included in the package）.
Buy It Now
Free Shipping Condition: Used Location: South El Monte, United States Servo Drive. Axis Specification. MITSUBISHI MR-S12-33A-E01. We believe ourWide Product Range will be your selection. Used & Tested. 24 months warranty ... moreis provided to our products. The length of the warranty depends on the nature of the products.
Buy It Now
$9.05 Shipping Condition: New Location: Anaheim, United States SGR20 2' Feet Compact Linear Motion Guide Rail + SGB20UU-5 Bearing Block. SGR20 2 feet Double axis roller linear guide + SGB20UU-5 block multi axis core ... morelinear Motion slide rail aluminum guide. Type: multi axis core type linear slide rail.
Buy It Now
Free Shipping Condition: New Location: Lake Wales, United States Set Screw Type. High Center Height.
Buy It Now
Free Shipping Condition: New Location: Union City, United States AB Kinetix 6000 Axis Module Part# 2094-AM02-S New In Box! Notes: We are an American company operates in China. We have warehouses in USA. Taiwan, Hong ... moreKong, and China. No copy. No fake, no renew/rebuild product. All products are 100% GENUINE, New In Box. We are a well known distributor in Asia. Let us help you source and reduce cost on quality products! If you have any technical problem or quality issue with the product. Please contact us within 30 days of receiving the product for exchange or refund(exclude S&H) No risk, guaranteed! Unless specified or emailed. Item(s) will be shipped the next business day once payment is received and cleared. Shipping to worldwide destination usually takes about 7 business days. FOR INTERNATIONAL SHIPPING. PLEASE PROVIDE US WITH CONTACT TELEPHONE# FOR SHIPPING PURPOSE! If you purchase multiple items. Discount is available. We do ship our products worldwide. If you have any problem purchase our item on Ebay, please let us know. Payment method: Paypal. Bank transfer, check. Thank you for looking. If you have any questions. Please drop us a note cndistributor@gmail.com On Oct-07-09 at 14:31:15 PDT. Seller added the following information:
Buy It Now
$24.91 Shipping Condition: Used Location: Middlebury, United States MPN: B8410264. Prefer to pick it up yourself?. Will there be a dock or forklift. Need it urgently?. Call us and we will do what we can to get it to you ... morequickly. We choose the carrier. To get a freight quote we will need to know the following.
Buy It Now
Free Shipping Condition: Used Location: Baltimore, United States A wide range of 1–axis or 2–axis power modules is available. As PLC Hardware is not an Authorized Distributor of the products,manufacturers' warranties ... moreand support do not apply. All listed logos, trademarks or service marks are property of their respective owners.
Buy It Now
$3.75 Shipping Condition: New Location: China Motor size: 20.8mm 26.6mm. Motor height: 30mm. Motor x 1pcs. Weight: 60g. We afford all cost if it's our fault.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Direction of motion: R axis. Direction of motionR axis. 1×Manual Slide Table. Stroke LengthDoes Not Apply. Due to the different display and different ... morelight, the picture may not reflect the actual color of the item.
Buy It Now
$2.00 Shipping Condition: New Location: Chino, United States 1 x SFU1605 Sliding Table. Stroke：200mm. The sliding table is convenient and easy in use, can be directly fold cross slide, gantry sliding table, 3-axis, ... more4-axis, multi-axis combination in use. The sliding table is equipped with hand wheel, and lock.
Buy It Now
Condition: New – Open box Location: Clinton Township, United States LEONI KIT KCO 0035 HH WITH ATTACHED PART NUMBER UMBILICAL 5. J96.01.0K62, SUPPORT AXIS 6 PLAN 2138, BRACKETS AXIS 6 SH 00 71 R, BRACKETS AXIS 3 PLAN 2665. ... moreMANUFACTURER PART NUMBER: KIT KCO 0035 HH. MANUFACTURED BY: LEONI.
Buy It Now
Free Shipping Condition: Used Location: Baltimore, United States Rockwell Automation > Motion > Servo Drives > Kinetix > 2198-D012-ERS3/A. As PLC Hardware is not an Authorized Distributor of the products,manufacturers' ... morewarranties and support do not apply. All listed logos, trademarks or service marks are property of their respective owners.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1 x SFU1605 Sliding Table. Stroke：400mm. The sliding table is convenient and easy in use, can be directly fold cross slide, gantry sliding table, 3-axis, ... more4-axis, multi-axis combination in use. The sliding table is equipped with hand wheel, and lock.
Buy It Now
Free Shipping Condition: New Location: China Brand IFM MPN IN5129 model IN5129 UPC Does not apply.
Buy It Now
Free Shipping Condition: New Location: China LINEAR SCALE. EG : 120mm travel length linear scale, total length =travel length + 127mm， so linear scale 's total length =120+118=238mm. Slim linear ... morescale. Linear scale. EG: Choose travel length 320mm ,total length =travel length +133mm.
Buy It Now
Free Shipping Condition: New Location: China Brand eaton MPN DILM150-XHI11 Model DILM150-XHI11 UPC Does not apply.
Buy It Now
$2.89 Shipping Condition: New Location: China This link products for the separation type SSH fixed ring, optical axis limit ring shaft with retaining ring locator. Material:Aluminum alloy. Type:SSH ... moreSeparate type. T5 AT5 T10 AT10 Open-ended PU Timing Belt 10-50mm Width White Polyurethane Belt.
Buy It Now
Free Shipping Condition: New Location: Chino, United States OT-ZMWHY-2725-2 Note: The 57 Stepper Motor is Not Included, without base. Features : 1. Horizontal load: 200kg 2. Vertical load: 50kg 3. Stroke:400mm ... more4. Ball screw type: 1605 (diameter 16mm, lead 5mm ) 5. Ball screw accuracy: c7 6. Stepper motor: not included 7. Repeat positioning accuracy: ± 0.02mm 8.Material: Aviation Aluminum 6061 Package included : 1 x Electric Sliding Table 1 x Hand Wheel 1 x Lock.
Buy It Now
Free Shipping Condition: New Location: China We will send you a new one after receiving the defective item.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: 义乌市, China You may need to sign in. 24 months warranty is provided to our products. The length of the warranty depends on the nature of the products. How many months ... morewarranty do you provide ?. We believe ourWide Product Range will be your selection.
Buy It Now
Free Shipping Condition: Used Location: China Brand Sanyo MPN F68010KDF81 Model F68010KDF81 UPC Does not apply.
|
|
|
|
Fanuc DC servo type 5 N-2000N Mori Seiki SL 3 axis motor
For sale is a Fanuc DC servo motor type 5N-2000M. Number D-895482 from a Mori Seiki SL-3 lathe. This unit tested good on the lathe. Lathe is being retrofitted to AC brushless servos and new control. Please see other listings for more Mori Seiki/Fanuc items. Thank you
|
|
|
Haas VF3 simultaneous 5-axis VerticaL CNC
This sale also includes a seat of Esprit CAM software: Build: 18.1.6.1022 Release Date: February 24. 2011. Solid Mill Traditional. Solid Mill Production. Solid Mill Freeform. Solid Mill Mold. Solid Mill Mold 5-Axis. Training tutorials covering all machining and Post Processors Also included with this sale is 1) HRT-210(Brushless) Rotary table. In excellent mechanical condition. There is a machining mistake that damaged the platter but does not affect operation in any way. New platters are available from Haas. Haas Vertical Machining Center. Model VF-3. Serial No. 29809. Full simultaneous 5-axis ready Software Version M12.12N. Manufacturer inspection Date: 10/8/02. Travels: X Axis 40" Y Axis 20" Z Axis 25" Spindle nose to table(min) 4" Spindle nose to table(max) 29" Table: Length 48" Width 18" T-slot width ... more5/8" T-slot Center Distance 3.15" Number of T-slots 5. Max weight on table(evenly distributed) 3500 lb. Spindle: 20hp Vector dual drive. RPM 7500 Taper Ct 40. Feed rates: Rapids on XYZ 1000 in/min. Max cutting 650 in/min. Tool Changer. Type: Carousel. Stations 20. Options: 50 gal coolant and pump. Chip Auger. Programmable Coolant Nozzle Rigid tapping. Spindle Orientation. 16 MB memory
|
|
|
Vertical Machining Center 5-Axis CNC Fryer Model MC-30 (2002)
Fryer Model MC-30 5-Axis CNC Vertical Machining Center(2002) Specifications X Axis Travel: 32" Y Axis Travel: 18" Z Axis Travel: 26" Spindle speeds: 24000 RPM, Spindle Taper: HSK-F63, Rotary Table Top To Spindle Nose: 21" Main Motor Drive: 10 HP, Equipped With: 5th Axis Trunion Tilting Rotary Table. MSDI Open CNC 5+ Axis Control, Windows Based Control with IP File Sharing G Code Compatible, Chip Tray And High Flow Coolant Pump, Factory Installed 8" Extension, Less Than 500 Hours, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
|
19.5" W or Dia Nikken 500mm Rotary Tbl w/ Fanuc 4th AXIS CNC ROTARY Tbl, WITH T
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 19.5" W or Dia Nikken 500mm Rotary Tbl w/ Fanuc 4th AXIS CNC ROTARY Tbl. WITH T Ref# 151895 iammdna XCNCRT NIKKEN CNC-500V FA Horizontal/Vertical CNC Rotary Table Mfg: 1990 S/N 1252 Minimum increment.001° ... moreTable diameter 19.68" Table height. Horizontal 11.41" Center height. Table vertical 12.20" Center bore diameter 5.11" Rotation speed 12.5 RPM Load capacity. Vertical 882 lbs. Load capacity. Horizontal 1760 lbs. Total reduction ratio 1/120 Equipped With: Pneumatic clamping with solenoid valve inside the motor cover FANUC AC servo motor Manual tailstock Weight w/ tailstock: 1.275 lbs. Machine Location: HARRISON. NJ Click Here For More Nikken Machines Click Here For More Boring Mills- CNC ROTARY TABLES(s) Click Here For More CNC Machines- CNC ROTARY TABLES(s) Click Here For More Tooling& Accessories- CNC ROTARY TABLES(s) Questions about this Machine? Call Mark at(800) 873-6224 ext 7510 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. In business since 1971. All used items bought from our eBay store are covered by a standard MDNA(Machinery Dealer's National Association) 30 day return privilege. Which means you can return an item you are dissatisfi
|
|
|
TANSHING model TRNC-125H (5" Diameter) CNC 5th Axis Rotary Table 2-Axis Trunnion
ebay template model TRNC-125H(5" CNC 5th Axis Rotary Table I TEM S OLD A S P ICTURED SPECIFICATIONS Specifications/ Model TRNC-125H Worktable Diameter Ø 4.92" Ø 125mm Table Height Horizontal 9.29" 236mm Center Height 90° 5.91" 150mm Overall Height 90° 10.24" 260mm Center Bore Diameter Ø 0.98" H7 Ø 25 H7 mm Through-Hole Diameter Ø 0.98" H7 Ø 25mm Width Of T-Slot 0.47" H7 12 H7 mm Width Of Guide Block 0.55" H7 14 H7 mm Tilting Angle-40° ~ +120° Axis Rotation Inclination Minimum Input Increment deg. 0.001° Indexing Accuracy sec. 40" 60" Repeatability sec. 4" Servo Motor(Model As Required) FANUC B4IS Speed Reduction Ratio 1/90 1/180 Table Rotation Speed 55.5 rpm 27.7 rpm Motor Rotation Speed 5000 rpm 5000 rpm Allowable Inertia Force ... more2 kg-cm-sec 2 Allowable Turntable Torque 8 kg-m Drive Pressure/ Method 5 kg/cm 2/ Pneumatic 35 kg/cm 2/ Hydraulic Clamping Torque 8.5 kg-m 17 kg-m Allowable Load Capacity 0° 110 lbs. 77 lbs. 50 kg. 0°~90° 35 kg. Allowable Workpiece Diameter Ø 4.92" Ø125 Net Weight(Motor Excluded) 233 lbs. 106 kg. Specifications subject to verification INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are at
|
|
|
Yuasa #550-009 Uni-Dex 5-C 2 Axis Indexing Fixture
Yuasa 2 axis 5-C collet fixture and collet nut. Yuasa tag is missing. Good used condition. Some rust stains from sitting in my basement for many years. See and
|
|
|
#542B-84 LUCAS 5" Five-Axis CNC Table-Type Horizontal Boring Mill (1996 Retrofit
Preowned 5" LUCAS Five-Axis CNC Table-Type Horizontal Boring Mill. Model: 542B-84, S/N: 42B-4008(Originally Built 1967. Retrofitted& Remanufactured by Phoenix Inc. in 1996) Diameter of spindle Taper in spindle Spindle traverse(Z-axis) Headstock. Vertical travel(Y-axis) Working surface of t-slotted table Diameter of t-slotted rotary table(B-axis) Number of positions of B-axis rotary table Axial load capacity of B-axis rotary table Table cross travel(X-axis) Saddle travel(W-axis) 3) Ranges of infinitely variable spindle speeds Approximate maximum height of machine(to top of Y-axis servo motor) Approximate height of machine for shipping purposes(with Y-axis servo motor removed) 5" 50 ANS power tool lock 35" 45.5" 48" x 86" 60" 360.000 32.000 Lbs. 82.7" 33.5" to 2.500 R.P.M. 141.5" 122.5" ... moreEquipped With#15MB FANUC five-axis CNC control with color CRT. Graphics, and hand-held pendant Separate FANUC AC servo drives and motors for all five axes#4043 PRODUCTO 60" diameter t-slotted CNC rotary table S/N A951(B-axis) Hardened and ground ways on X-axis Telescopic way covers on X& W-axes Air lift to table and saddle Built-in outriggers with hardened ways TRABON Modu-Flo way lubrication system External coolant pump with tank 29.5/34.85 H.P. Continuous Duty/30 Minute) AC spindle drive motor Free-standing electrical control cabinet with RS-232 interface Electrical transformer Machine is wired for 3/60/480 volt operation. Approximate Weight: 60.000 Lbs. We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
5 Axis CNC Rotary Table Fixture for Horizontal Machining Center 4th and 5th Axis
This is an immaculate Walter 4th/5th Axis CNC Rotary Fixture that could be used on your Horizontal or Large Z Travel Vertical Machining Center. It has a 16" Horizontal Rotary Table holding a precision window fixture with a 10" Rotary Table and precision bearing unit apposing it. Use the window fixture or build your own custom fixture to mount in its place. There are 2 DC motors currently included. You could use them or change them to whatever type of motor your machine requires. This is an amazing value on a high precision fixture. Any questions call Jerry@ 503-998-0985
|
|
|
3 axis piezo piezoelectric actuator controller 0-5V signal in 2.5-150V out
Tested Working on all three axes. Full range control via knobs or analogue 0-5 volt signal line. Used it occasionally but don't need it any more. It will take a few days to box this properly due to weight.
|
|
|
5 axis Duplicating Router/ Wood Carving Machine
Hello! I am Chris Foss of Songbird Dulcimers. My Mother. Connie Foss is a life long sculptor who has decided it is time to quit the large wood sculpture part of her business. This machine was the heart of that, doing all the rough out work for my mother before she did the finish carving. My parents developed a very good business making furniture that incorporated her sculptural designs. My mother would carve a master from scratch. Then my father would rough out as many copies as necessary on a machine he cobbled together from two commercially available Dupli-Carvers. Then she would do the finish carving, and he would complete the piece. After he passed away in the late 1990s the duplicarver moved to my shop where we did the rough work for my mother. But I had a rough time with it, too flexible and light, and it would take large digs out of ... morethe work. So I designed this machine, and got my friend and master fabricator Bill Fraunfelder to build the steel parts. The way the machine stays in parallel. The carriage moving back and forth rolling on large sprockets with roller chain laid in a track is purely my idea. Later the machine moved back to my mother's shop where our friend Jim Laipple has been doing the rough work for Mom for many years now. This is a 5 axis machine. Which means it will carve both in the round, and relief. The carriage moves backward and forward, up and down, and left and right. The turntables also rotate in unison, and the bed tilts, so 5 axis. The two pictures are of work that was done on the machine. The back of the bench is 50 inches long, and 22 inches wide. The center to center measurement is 28 inches, so work to be done in the round can be put on the turntables of any measurement less than that. It uses standard Porter Cable 690 router motors. An extra motor comes with it as well as styluses and bits. The master goes on the center turntable, and work to be duplicated on either side, so two duplicates can be made at once. The bar with the turntables on it is adjustable, the master and
|
|
|
Newport 460-XYZ Linear Translation Stage, 3-Axis, 0.5" Range, w/ Micrometers
Newport 460-XYZ linear translation stage. In very good mechanical and cosmetic condition. 0.5" travel range along each axis. Three early-model Newport vernier micrometers are included. Vernier scale allows 1um adjustments. Payments. Shipping, and Returns: We allow a 14-day right of inspection. Any r eturn shipping must be by traceable and insured means. Buyer will be responsible for all shipping costs. Items are typically shipped within 1-3 business days following a cleared payment. We minimize buyer's cost by re-using shipping supplies and selecting the lowest rate service available. Buyer may request alternative shipping services. Including overnight delivery when available. Multiple items will be automatically combined into a single shipment when possible. Pennsylvania residents pay sales tax. International buyers are welcome. ... moreAll international payments must be made through PayPal. International buyers are solely responsible for import duties and/or brokerage fees. We offer low-cost shipping by USPS Priority Mail International when available. Please note that typical international delivery takes 2-4 weeks and there have been occasional delays of over 8 weeks. We are not responsible for shipment delays due to circumstances outside our control. If your purchase is time-critical. Please select UPS Worldwide service or contact us for other available options.
|
|
|
MILLTRONICS PARTNER 3 AXIS KNEE MILL CENTURION 1 WITH VER. 5 SOFTWARE
Milltronics Partner 3 Axis CNC/ Manual Knee Mill Model: Partner 3 Serial: 3656 Built: 1996 Table: 10 x 50 Travels: X 32" Y 15" Z 6.5" head slide) Quill 5" Max under head 20.5" R-8 Spindle. Machine Dimensions: 6'6" Wide 6' 0" Deep 6' 10" High. Includes: Power Drawbar Power Knee andCoolant System This mill has external full keyboard. MDI, conversational or g code programing, power knee, power drawbar, coolant system( it is unkown if pump works) variable speed head(60 to 500 low, 500 to 4200 high) It can be run manually by crank handles and quill with digital readouts and quill digital scale. Full three axis operation by conversional. G code or RS 232 connection. Programs are saved to 3.5 floppy disk. USB adapter available from Milltronics. Includes manuals on CD for Centurion 6(close, but ... morenot exactly same as ver. 5) Machine weight just over 3000 lbs. Six foot ten inch height should fit under most residential garage doors. Loading is free at agreed upon time. Delivery is available for $1 per mile from zip 45875. If delivered. Buyer responsible for unloading. Payment for mill and any shipping must be made in full before any shipping. Paypal preferred.
|
|
|
ADIRA 70 Ton X 8.36 Foot Hydraulic DNC Press Brake 5-AXIS Cybelec DNC800 Control
This machine does not get much use because they have two other machines and because they downsized several years ago. I have included pictures and I think you can see that this was well maintained. This is a completely integrated DNC bending machine and all of the features work perfectly. It is currently under power and can be demonstrated for you if you care to schedule an appointment. This also has a portable station with dual palm buttons and foot controls. The machine is currently connected to 3 phase 220 volt power but can easily be changed to 440 volts. Model– QHX-6325CBPSerial# 5155/9547Capacity 70 TonsLength of Bed and Ram 8.37 feet(100.5”Distance Between Housings 81"Ram Stroke 4"Open Height 14.6"Bending Capacity 10 Ga. Mild Steel Full LengthRapid Advance Speed 198 IPMForming Speed 24 IPMMotor 6.5 HPApproximate weight ... more10.000 lbs.Dual palm foot stationAxes- X1, X2, Z1, Z2 and RWith sectional ram clamps full length of machineBottom Die HolderFlush Floor Frame
|
|
|
Microscribe-3D 5 Axis Digitizer W/ Rhinoceros NURBS Modeling For Windows
This is a Microscribe 3-D digitizer and the Rhinoceros NURBS modeling for windows version 3.0 is included with the key code purchased by the owner. He does not have this program on any of his computers. So you would legally own the software. Everything in the pictures are included. Except the obvious Christmas tree and my laptop. You'll get the microscribe, the rhino book, code, and CD, the foot pedal that hooks to the microscribe, the power supply, and serial cable. I figure that if you are reading this you probably know more than I do about all of this stuff. I know that the new Rhino program is over $800 so this should be a great start for someone This is my bosses unit. He ungraded to a Faro 7 axis for use on porting cylinder heads for an engine on our new centroid 5 axis mill. He said that he can't see that he would vet use the ... moreMicroscribe unit again. The silver pointer is not original. The original part broke and he made this one. I believe. He said that he wanted to purchase a new tip, but it just never happened. From what I have read, with the OE tip, this unit is super accurate. I saw that they used the same unit family to make Shrek, the movie The unit was working the day I unplugged it to help him set up his new Faro 7 axis. Him and I talked about listing this unit and software package months ago. My details are limited because I do not use this equipment. I want to get all of the details that you would like to have as a buyer. Email me and I will pass along the question and get you an answer. Shipping in the USA only. To a confirmed PayPal address, within three business days of a cleared PayPal payment. Because it is electronic and we know that the tip is not the original item, I can't offer a refund unless there is shipping damage and I will insure the box. I have over 8 years on eBay and have never had an other positive feedback. Please email me with questions or advice for me to put in this ad. Posted with
|
|
|
K2 AXIS MOD X 181CM DOWNHILL SKIS MARKER M41 BINDING DIN 2.5-9 SIDECUT 107-70-97
THIS IS A GOOD CONDITION. WITH NORMAL USE, PAIR OF DOWNHILL SKIS MADE BY K2. THESE ARE THE AXIS MOD X MODEL 181 CM IN LENGTH. THESE ARE MARKED WITH A 16 mm RADIUS AND A SIDECUT OF 107-70-97. THESE COME WITH MARKER M41 FULL SPECTRUM BINDINGS WITH A DIN SCALE OF 2.5-9. WE ARE GOING TO START LISTING OUR WINTER EQUIPMENT WHICH INCLUDES OVER 50 DOWNHILL SKIS AN OVER 100 ITEMS INCLUDING SKI& SNOWBOARD BOOTS, SNOWBOARDS, HELMETS, POLES AND MUCH MORE. CHECK OUR OTHER AUCTIONS, ASK A QUESTION AND SAVE ON MULTIPLE COMBINED PURCHASES. WINNING BIDDER WILL PAY $25.00 FOR SHIPPING. INTERNATIONAL BIDDERS MUST CONTACT US DURING AUCTION FOR FOREIGN SHIPPING COSTS TO YOUR LOCATION. HAPPY BIDDING.
|
|
|
AXIS Rear Entry Ski Boots-MP 14.5 / 206mm / Kid's Size 6 / 7
AXIS Rear Entry Ski Boots-MP 14.5/ 206mm/ Kid's Size 6/ 7 Click to Enlarge Click to Enlarge Click to Enlarge AXIS 01 Rear Entry Ski Boots; Mondo 14.5-206mm-USA Size 6/ 7 for Kids(I measure the inside length of the liner to be about 6 1/4" These pre-owned boots show use. Light scratches but are excellent with good clean liners and minimal wear on the soles. E-mail for further details. Shipping will be $ 14.75. We accept credit cards from confirmed PayPal users and we recommend it for fast shipping. All items shipped 1 working day after payment received. Ski Boots are shipped to lower 48 states via FedEx Ground Service. We accept credit cards and e-checks via PayPal. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
+++ DMG DECKEL MAHO SAUER Ultrasonic 20 linear HSC 5-Axis simultaneous +++
Manufacturer: DMG SAUER Model: Ultrasonic 20 linear Year built: 2007 Number of axis: 5 Control: Siemens 840 D powerline main spindle- Tool: HSK 32 Speed range: up to 42.000 1/min HSC spindle with actuator ring(Ultrasonic function) Moves the tool holder in Axial vibrations. Technology suitable for machining brittle and hard materials such as glass. Ceramic, carbide The machine is also suitable for normal HSC machining without ultrasonic technology. Traversing- X] 200 mm[ Y} 200 mm[Z] 280 mm[ A] 10 ° to 130 °[ C] 360.000* 0.001 °( torque direct drive) tool magazine- Type: Pick-up disc Places: 2x12(wheel) optional with the following equipment- Coolant system- Internal coolant- filter-unit- Minimum quantity lubrication- Dust extraction- High-precision touch probe Marposs tool measurement- Type: Laser bridge Measurement: Length. ... moreLength 2, radius, radius 2 Manufacturer: Renishaw Typical Uses- Mould( sorties. Seeds, electrodes made of copper and graphite) Tooling( punches. Matrices) watch and clock industries Jewelery industry( cutting gems) Precision tool shops The accuracy of the machine is 0.001- 0.004mm in all measurements. Packaging and delivery to USA and Canada is not a problem! We can do it quickly! Used machinery without any warranty. WE ARE EXPERTS IN USED DECKEL MAHO GILDEMEISTER MACHINES. We have following machines in stock: DMU 200P. DMC 160U. DMU 50 evolution linear. CTX beta 1250 TC. DMU 80 monoBLOCK. And many more. ask us for more informations or check our website.
|
|
|
Axis Team little kids skis 80 cm length marker 4.5 bindings blue red used nice
used in very good condition
|
|
|
Galil DMC-1050 5-Axis ISA Motion Controller Card w/DB-1004 Daugtherboard &Cables
Questions? Call us: 1-877-328-9236. Galil DMC-1050 5-Axis ISA Motion Controller Card w/DB-1004 Daugtherboard&Cables. Manufacturer: Galil Motion Control Model: Various Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Galil Motion Control Condition: Used. Comes in non-original packaging. These items are in good cosmetic condition. They have some scuffs. Scratches, and dust from previous use. Notes: These items were removed from equipment taken out of service. They were not tested by the seller. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Galil DMC-1050 5-axis motion controller card, 1) Galil DB-1004 daughterboard card, 2) 60-pin cables, 1) 26-pin cable, 2) 20-pin cables, Specifications: Manufacturer: Galil, Model: Various, Type: 5-axis motion ... morecontroller, Main card: Galil DMC-1050 controller card, Daughter card: Galil DB-1004, Interface: ISA, SKU: M07F031 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing t
|
|
|
MOOG TRI AXIS DRIVE PCB BOARD MODULE H71235 CNC (C14-5-8E)
in titles& description Make sure you get our updates on discounts and new available products! In titles& description This is a MOOG TRI AXIS DRIVE PCB BOARD MODULE. PN:H71235 THIS ITEM IS GUARANTEED TO BE IN WORKING ORDER UPON ARRIVAL. PLEASE DISREGARD THE NUMBERS IN PARENTHESES AT THE END OF THE DESCRIPTION IN THE TITLE. THESE ARE FOR OUR INTERNAL REFERENCE. WE OFFER A 14 DAY RIGHT OF RETURN. We accept Paypal. Visa& Master card. Payment must be made within 3 days of item ending. We take great care in packaging your products and use only the best materials. We usually ship USPS for smaller domestic shipments. For larger items. We use FedEx or UPS. We also ship freight for very large and heavy items. In order to give you the lowest possible rate, we combine shipping charges on multiple orders. WE SPECIALIZE IN INTERNATIONAL SHIPPING. ... moreInternational Shipping rates will be higher than the rate posted here. Please contact us for international rates. All items are guaranteed to be in proper working order upon arrival. Unless specified otherwise in the description. We have been in the Industrial and manufacturing supply field for over 7 years and take pride in providing our customers with THE BEST CUSTOMER SERVICE. We do our best to describe everything. If you have questions. Please feel free to email us. We strive hard to make sure our customers are happy. We use the appropriate packaging materials that are necessary when packaging your items. We hope that you will find your purchase satisfying. If by chance there is an issue with your item, please let us know right away. We are always ready to address any concern. Local pickups can be made by appointment only at our warehouse at 3401 Industrial lane, Suite A Broomfield, Co 80020. ATTENTION: What is pictured above is what to expect. Unless stated otherwise in the title or description above. All used items are sold un-tested unless stated otherwise. We accept payments of Credit Card. Debit Card, or E-checks through PayPal only. Please pay within 3 days or pl
|
|
|
+++ DMG DECKEL MAHO DMC 125 FD HIDYN 5-Axis simultaneous +++
Deckel Maho DMC 125 FD HIDYN combined milling and turning center with pallet changer Year 2002 25.000 power-on hours. 10.500 hrs. approximately 75% machining of plastics The machine is used in a pump manufacturer. Which manufactures plastic pumps for the chemical industry. The equipment: Universal milling and turning machining center DMC 125 FD Hi-Dyn Traverse 1250 mm x 880 mm x 800 mm Rapid traverse speed X/ Y/ Z 40m/ min Motor spindle 10.000 1/min 44 kW( 40% DC) 32 kW(100% ED) HSK-A 100 according to DIN 69893 Tool changing device vertically with Double gripper. 60 magazine locations HSK-A 100 Universal milling head with controlled B-axis. NC-Table Palettes: Ø1100( 2 pieces) Workpiece weight: max. 1500KG Stoerkreis: 1260mm Speed : 350 1/min Torque: 3200 Nm Holding torque: 8000 Nm 3D CNC control MillPlus IT FD Electronic handwheel ... moreHR 410 Infrared measuring probe Heidenhain HSK-A 100 Dust filtration Electrostatic filter Tool measurement in the working space Type Blum laser automatic retraction of the measuring unit Tool length and diameter measurement horizontal/ vertical Mode 4 Enhanced manual intervention Spray pistol with pump 1 bar/40 l/ min( theoretical pump performance) Packaging and delivery to USA and Canada is not a problem! We can do it quickly! Used machinery without any warranty. WE ARE EXPERTS IN USED DECKEL MAHO GILDEMEISTER MACHINES. We have following machines in stock: DMU 200P. DMC 160U. DMU 50 evolution linear. CTX beta 1250 TC. DMU 80 monoBLOCK. And many more. ask us for more informations or check our website. Info@kuehner-werkzeugmaschinen.de.
|
|
|
AXIS AX 2J Down Hill Snow Ski Boots Size 4 or 22.0-22.5 mondo , 262mm Black
AXIS AX2J SKI BOOTS- KIDS SIZE 4 OR MONDO 22.0 to 22.5. 262MM SOLE LENGTH PRE-OWNED IN GREAT CONDITION. THE TYPICAL LIGHT SURFACE SCUFFS AND SCRATCHES BUT THE LINING IS WHAT IS SO NICE. IT'S LIKE NEW! AND THE SOLES ARE IN VERY GOOD CONDITION TOO. THESE ARE A REALLY NICE 2 BUCKLE BOOT WHICH ARE SO EASY FOR KIDS. Comes from a smoke and pet free home. Payment is through PayPal and must be paid within 3 days of shipping. Shipping is calculated by your zip code. Returns allowed within 14 days in same condition for a refund of the purchase price. Thank you!
|
|
|
Mens Axis Thinsulate Insulation US Size 6.5 EUR 39 Snowboarding Boots
For sale I have a pair of Mens Axis Thinsulate Insulated Snowboarding Boots. They are US Size 6 1/2 EUR 39 as marked. They are used but in good condition with only minor signs of wear as pictured. A good pair of snowboarding boots. Check out the other sports and outdoors stuff. Antiques and collectibles, electronics, or paintings and art we have for sale! We are happy to do combined shipping on most items. Please email us before paying if you have purchased multiple items. Thanks! Please contact me if you have any problems before posting feedback. We are a family operation and try to do the best job at picking things from the mountainy area of Colorado Springs. We hope you find something you like!=) RETURN POLICY: If you purchase an item from us and are not satisfied. We offer a hassle free return policy. Simply send it back within 14 days ... moreof receiving it for a full refund of your purchase price. If the item is defective, we will of course pay the return shipping. This policy covers new defective items and any used items. New items that are opened and used at the time of arrival cannot be returned unless defective. Please note we expect payment within 1 week unless other arrangements are made. We appreciate 5 star ratings in each of the 4 categories. If you don't feel you've received 5 star service. Let us know so that we can fix whatever issues may arise. International Buyers- Please Note: Import duties. Taxes and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Thanks for your Understanding! If you have any questions please contact me prior to purchase!
|
|
|
yukiwa 4th Axis Rotary Table 5-1/2" 5.5" (140mm) Chuck Metal Lathe CNC 7"W 12"L
yukiwa 4th Axis Rotary Table yukiwa 4th Axis Rotary Table 7" wide x 12" Long 5-1/2" 5.5" 140mm) Lathe CNC 1 x 19 prong plug 1 x 14 prong plug 1 x air hook up as shown From a working environment please see all photos double click photos above for larger image this Item Weighs 78Lbs Packed and will be send via UPS GROUND Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive all items are sent same day if bought and payed for before 12.00 noon Monday- Friday Before 10Am Sat if not it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy Thank You For Viewing
|
|
|
used kids ski boots Dalbello 3 buckle axis ski boots black size 25.5 axis
Dalbello AX# kids ski boots youth ski boots size 25.5 BSL 287 Clearing out some boots left over from a previous junior lease. Still plenty of life left in this great boot. Maybe your kid has outgrown a pair that he or she has? Grab these for a steal. 3buckles and a nice comfortable fit. Boot is a dalbello model that is branded axis. Fits kids size 5 to 6.
|
|
|
Cincinnati Milacron T-35 5-Axis CNC Horizontal Machining Center Milling Machine
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2358569 A: 0013000000CXCfg O: 0065000000PQiuq PA: View Photo Gallery. Request Freight Estimate. View Financing Options. Sell Your Equipment. Location: Auburn. WA 98002 Item Description. This is a no reserve auction for a Cincinnati Milacron T-35 5-Axis CNC Horizontal Machining Center Milling Machine Mill Dual Pallet. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, ... moreand small equipment. This item is located on Boeing property in Auburn. Washington. Rigging charges for professional removal will apply. Please see details below. Overview: Make: Cincinnati Milacron Model: T-35 Type: Horizontal Machining Center Serial No: 3123C0195-0002 Hours(shown at time of inspection) In Cycle Runtime: 26.502 hours Spindle Running: 23.038 hours Features/Specifications: Control: Cincinnati Milacron Acramatic 950 5-axis operation Dual pallet shuttle system Axis Travel/Ranges: X-Axis(column) 40" Range. Centerline of B-Axis to Centerline of Spindle: +/20" Y-Axis(spindle carrier) 60" Range. Top of Pallet to Centerline of Horizontal Spindle: 0" to 60" Range. Top of Pallet to Gage Line of Vertical Spindle: 12.5" to 47.5" Z-Axis(table) 62" Range. Centerline of B-Axis to Horizontal Spindle Gage Line: 12.5" to 49.5" Range. Centerline of B-Axis to Centerline of Vertical Spindle: 0" to 62" Pallet Size: 31.5" x 31.5" Spindle Drive Motor: 30 HP(continuous operation) 40 HP(30 min. operation) Spindle Speed Range: 20- 4.000 RPM Taper Size: No. 50 Feed Rates(X. Y& Z-Axes) 0.5 to 150 ipm Rapid Traverse Rat
|
|
|
used kids ski boots Dalbello 3 buckle axis ski boots black size 23.5 great shape
Dalbello cx3 kids ski boots youth ski boots size 23.5 BSL 267 Clearing out some boots left over from a previous junior lease. Still plenty of life left in this great boot. Maybe your kid has outgrown a pair that he or she has? Grab these for a steal. 3buckles and a nice comfortable fit. Boot is a dalbello model. Fits kids size 4 to 5.
|
|
|
AXIS FX35 Ski Boots Mens 5.5, Womens 6.5 Shoe, 280mm Sole, Mondo MP 24
Hi! Welcome to our'Simple' Auction! No fancy template listings. No extravagant borders, No expensive design to market our items! By listing'simply' we save money and pass that savings onto you! See what we're offering below: AXIS FX35 Downhill Ski Boots in excellent condition. Shell stamped 280mm sole. And size Mondo Point 24, equivalent to Mens shoe size 5.5 or Womens 6.5 Lots of features. SUPER FAST SHIPPING! Plus. We do combine shipping on multiple items! Sample sizing chart: Thanks for looking and please see our other listings for more quality items! LIMITED TIME ONLY: Buy 1 item and each additional item SHIPS FREE!
|
|
|
Rossignol Rebel kid's skis 90cm with Marker bindings Axis 12.5 Boots Kids Socz
THIS IS AN EXCELLENT STARTER PACKAGE.ROSSIGNOL REBEL 90CM WITH MARKER M450 BINDINGS AND KIDS SOKZ HEAD SOCK,THE SKIS BASES AND TOPS ARE IN VERY GOOD SHAPE,ALSO WAXED AND TUNED,THE BOOTS ARE IN VERY GOOD SHAPE,LINERS ARE VERY SPONGY,ALSO I HAVE INCLUDED A KIDS HEAD SOKZ,THESE ARE EXCELLENT,KIDS LOVE THEM,ITS BEEN CLEANED AND WE LIVE IN A PET FREE,SMOKE FREE HOUSE,WE USE ALL NATURAL LAUNDRY SOAP,MY GF IS A TREE HUGER,EVERY TIME I PICK UP A SKI BROCHURE SHE LETS ME KNOW IVE KILLED A TREE,GOOD TIMES! ANYHOW.THIS IS A VERY GOOD PACKAGE IN GOOD SHAPE,CARRY ON!
|
|
|
Rotating Mirror Mount with 5" Off-Axis Mirror (LOC-C2)
This auction is for a mirror mount with a 5" off-axis mirror. The mirror can be rotated 360 degrees. The back of the mirror mount has what appears to be an adjustment mechanism. It would need to be cleaned and re-lubed in order to function. The mirror is in fair but usable condition. It does have some surface imperfections. Customer Service: 805) 658-1331 M-F 8:00am to 5: 00 PST Payment Instructions: Purchases can be paid trough VISA. MASTERCARD or AMEX. International Payment: Bank to Bank transfer Sales Tax: California residents must pay state sale tax Shipping: Buyer Pays Shipping. Shipping estimates are available prior to placing a bid if you email us your shipping destination. Shipping charges include packing and insurance Warranties or Returns: No warranties are expressed or implied. Items that are supposed to be operational according ... moreto the listing can be returned if they are D.O.D. Items that are untested or are sold as-is cannot be returned. Additional Terms:Payment must be made within ten days of the auction close date. Please visit our Store for additional items
|
|
|
Axis Laufwerk server 64MB 1x 36 GB SCSI 10/100 RJ 45 4x MJ 5.16 CD 19" Rack 4HE
Axis Laufwerk server 64MB 1x 36 GB SCSI 10/100 RJ 45 4x MJ 5.16 CD 19" Rack 4HE- Delwi IT-Remarketing GmbH Axis Laufwerk server 64MB 1x 36 GB SCSI 10/100 RJ 45 4x MJ 5.16 CD 19" Rack 4HE Artikelnummer: 20036099 Qualität. Gebrauchte A Ware. Von unseren Technikern geprüfte gebrauchte Geräte. Teilweise minimale Abnutzungsspuren auf dem Gehäuse! Produkteigenschaften. Allgemein. Hersteller, Axis Modell, Laufwerk server Gewicht, 30.00 kg, Zustand, A gebraucht Arbeitsspeicher. Arbeitsspeicher, 64 MB, Arbeitsspeicher Typ, OnBoard Festplatten. Anzahl HDD I, 1 Größe HDD I, 36 GB, Festplattentyp, SCSI Laufwerke. Laufwerk I Typ, CD Laufwerk I Anschluss, SCSI Laufwerk II Typ, CD Laufwerk II Anschluss, SCSI Anschlüsse. Ethernet(RJ45) ja Gehäuse. Bauform, 19" Rack Höheneinheiten, 4 HE, Stromversorgung. ... moreNetzteil Anzahl, 1 Netzteil, 300 Watt, Netzteil Typ, intern Kommunikation. Netzwerkkarten Anzahl, 1 LAN, ja LAN Geschwindigkeit, 10/100 Mbit Netzwerkkarte I, 10/100 RJ 45 Hinweis zur Entsorgung von Altbatterien. Anbieterinformation. Delwi IT-Remarketing GmbH Geschäftsführer: Sergej Weimer Ziegelring 6 87666 Pforzen Steuernr. 9125/124/20263 Ust-ID: DE 224875329 Kempten(Allgäu) HRB 10938 Gerichtsstand: Kempten Telefon: 08346 92180-0 Fax: 08346 92180-10 E-Mail: support@delwi-itr.de
|
|
|
Hitachi Seiki HC-400 5-Axis, CNC Horizontal Machining Center, Only Cut Plastic
Please see info below and photos on a super nice Hitachi Seiki HC-400 5-Axis Horizontal Machining Center. This machine is coming out of a World Class Medical Component Manufacturing Facility and is in excellent running condition. This machine has been running only plastic and is in great shape. The spindle and all the axes sound incredibly good. The machine has been doing very light cuts on plastic and it really shows in the condition of this machine. I can not stress enough the condition of this machine. This machine is in superb condition and will make someone an excellent machine. It is a rare opportunity to buy a 5-axis machine on the used market in such impeccable condition. I can shop and get you a freight rate if you want me to do so. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at paultrossman@hotmail.com. ... morePlease feel free to call me in the evening or on the weekend. Please feel free to call anytime I am willing to sell this machine without the Rotary Table Please call from more details. HITACHI SEIKI HC-400 5-AXIS CNC HORIZONTAL MACHINING CENTER S/N HC40649 EQUIPPED WITH: Fanuc 15 M CNC Control w/ 14" Color CRT. 8" Nikken Model CNC 200 5th Axis Add on Table, RS232 Port, Graphic Function, Part Program Storage and Editing, Background Edit, Canned Cycles, Backlash Compensation, Dwell, Dry Run, 50 Station Automatic Tool Changer Option, 2) 15.7" Full Contouring 4th Axis Pallets(360,000 Positions) Work Light, Chip Conveyor, Coolant System. CATALOGUE SPECIFICATIONS: Longitudinal Table Travel(X-Axis) 20" Vertical Travel(Y-Axis) 18" Head Cross Travel(Z-Axis) 18" Pallet Dimensions. 15.7" x 15.7" Maximum Pallet Load. 880 LBS. Number of Pallets. 2. Number of Index Positions. 360.000. Feed Rate. All Axes. 01-200 IPM. Rapid Traverse. All A
|
|
|
MILLTRONICS PARTNER 3 AXIS CNC KNEE MILL, CENTURION 5, Bridgeport type
Milltronics Partner 3. 3 Axis CNC or Manual Vertical Knee Mill(Bridgeport style) Model: Partner 3 Serial: 3656 Built: 1996 Table: 10 x 50 Travels: X 32" Y 15" Z 6.5" head slide) Quill 5" Max under head 20.5" R-8 Spindle 240 Volt 3 Phase Machine Dimensions: 6'6" Wide 6' 0" Deep 6' 10" High Includes: Power Drawbar. Power Knee, Automatic Oiler and Coolant System(coolant pump not operating) This mill has Centurion 1 control upgraded to version 5 with external full keyboard for programing in MDI, conversational or g code, power knee, power drawbar, coolant system, variable speed head(60 to 500 low, 500 to 4200 high) It can be run manually by crank handles and quill with digital readouts and quill digital scale. Full three axis operation by conversional. G code or RS 232 connection. Programs are ... moresaved to memory or 3.5 floppy disk. USB adapter available from Milltronics. Includes manuals on CD for Centurion 6(close, but not exactly same as ver. 5) Machine weight just over 3000 lbs. Six foot ten inch height should fit under most residential garage doors. Loading is free at agreed upon time. Delivery is available for $1 per mile from zip 45875. If delivered. Buyer responsible for timely unloading. Payment for mill and any shipping must be made in full and cleared before loading or shipping. Paypal preferred. This is a good working mill. In good condition with three axis CNC capabilities. Any questions, please ask. It can be seen under power. Subject to prior sale.
|
|
|
HUFFMAN HS-75R 5 AXIS CNC
Contact seller for a video demo of Cnc running. Ask for rick 440-251-9306"Buyer must pay shipping cost and transport"
|
|
|
WWII NEWSPAPER 5 NOVEMBER 1942 BRITISH ROUT AXIS NORTH AFRICA VINTAGE WAR NEWS
WWII NEWSPAPER 5 NOVEMBER 1942 BRITISH ROUT AXIS NORTH AFRICA VINTAGE WAR NEWS Description: The Knickerbocker News of Albany New York circa 5 November 1942. Headlines: British Rout Axis Desert Forces. Measures 16 1/2 X 23 inches in size(42 X 59cm) and is 28 pages in length. Newspaper is an authentic original in good condition as shown in photos.
|
|
|
5 AXIS DECKEL MAHO 600C SWIVEL HORZONTAL/VERTICAL HEAD 5 AXIS ROTARY TABLE #40T
WE ALWAYS CONSIDER ALL"REASONABLE" OFFERS AND MANY ARE PROMPTLY ACCEPTED! You are invited to purchase or" MAKE YOUR BEST OFFER" on a 5 AXIS 1998 DECKEL MAHO 600C HORIZONTATL/VERTICAL MILLING CENTER. 5 AXIS ROTARY TABLE. SWIVEL MILLING HEAD, and with the following approximate specifications: SPECIFICATIONS; X Axis: 23.6 in Y Axis: 17.7 in Z Axis: 17.7 in Milling Head…Swiveling milling head 5 Axis w/Rotary Table NC Rotary Table Clamping Area: 35.4 x 18.9 Spindle Taper… CAT 40 Main Spindle Motor… Variable Speed 15 HP@ 44% Duty Cycle. 10 HP@ 100% Speed Range… 20– 6300 RPM Rapid Traverse. 236" min Type Tool Changer… 30 Tool Magazine Voltage Required… 3 Phase 400 Volt w/240 Volt Transformer Approximate Weight:7.920 lbs. CNC 532 Control CONDITION: Excellent Running Condition! Mfg Date: 1998 Location: MA Can be inspected ... moreunder power This 5 AXIS 1998 DECKEL MAHO 600C HORIZONTATL/VERTICAL MILLING CENTER is known to be in a"Excellent Used Condition" and can be inspected by calling 606 882 2765 for appointment. Please review our"Feedback and About Us" where you will find that we ALWAYS try to fairly describe all items and offer a 7 day return guarantee(freight prepaid) if item is not as listed. For items shipped by truck contact any or all of the following for reasonable quotations: Chaun at Next Level Logistics 1-612-237-6843(Excellent Service) We additionally have local riggers that can give reasonable quotations as well as quoting containerizing items for overseas shipments. ALL items we list are offered locally and could be sold previous to end of store listing. We gladly accept Pay Pal in payment for items $150.00 or UNDER ONLY. For more expensive ITEMS acomodations can be made WITH PRIOR PERMISSION to pay with Pay Pal. We additionally accept personal. Company, certified, cashiers checks drawn on recognizable U. S. Banks and accept bank wire transfers. Once payment
|
|
|
5 or 3 axis mold making thermwood router
5 axis cnc router Table size 48" x 99" Z axis 31" New 7hp router manual tool change. Fagor 8050 control Completely rebuilt in 2013 This machine is offered with an option to convert to a 3 axis machine With auto tool change HSD auto tool change head. Price includes loading the machine on the truck you pick it up with.
|
|
|
AXIS Rear Entry Ski Boots Mondo 15.5 Euro 25 / 206mm / Kid's Toddler Size 7
AXIS Rear Entry Ski Boots Mondo 15.5 Euro 25/ 206mm/ Kid's Toddler Size 7 These boots have some scuffing on the inside ankles from normal use(see pictures) But are still in good overall gently used condition and are a very nice pair of comfortable beginner ski boots with a lot of life wear left in them. Be sure to check out my and to add me to your! I always have lots of good quality items and will gladly combine shipping on multiple purchases. US buyers pay $10.00 shipping and handling. International buyers contact me for a shipping cost. Paypal payments only please. Email me with any questions. Thanks for looking!
|
|
|
2006 Crippa CA 542 5 Axis Tube Bender
2006 Crippa CA 542 5 Axis Tube Bender Siemens 810D CNC Control Maximum Tube Diameter: 42mm/ 1.65" Maximum Length of Tube: 3500mm/ 137.79" Maximum Bending Radius: 150mm/ 5.9" Maximum Mandrel Stroke: 350mm/ 13.77" In plant under power in Michigan. Extremely flexible tube bending machine with 5 axes Computerized Numerical Control max tube diameter 42 mm. Movements completely operated by CNC digital electrical axes. Automatic left and right sense of bending. Possibility of thrust bending and variable radii with easiness of programming. Different bending radii and working planes( multiplane/ multiradius) Possibility of punching in cycle. Use of European Patent 0538207 head with vertical and horizontal movement. Loading and unloading integrated with the machine movements( without feeders or dedicated loading/unloading systems) ... moreThe Best Bender In The World For More Information Call Maury Cohn 1 800 888 4312 More Sample Videos Of New Machines CRIPPA TUBE BENDING MACHINE, CA Series, The CA tube bending machines line makes use of the latest high-tech evolutions in the utilization of the single components and this leads the accuracy. Performance and reliability values to levels of absolute excellence. + zoom. CA LINEAR Series, The CA LINEAR tube bending machines line was designed for the utilization in any manufacturing sector thanks to its wide range of employment(from 25 to 80 mm of tube diameter) and to its high-tech contents. That make it unbeatable at a worldwide level. + zoom. CA IBRI Series, The CA IBRI tube bending machines line makes use of the latest high-tech evolutions in the utilization of the single components and this leads the accuracy. Performance and reliability values to levels of absolute excellence. + zoom. CA SMALL Series, The CA SMALL tube bending machines line was born from the CRIPPA experience to satisfy the needs of compactedness. Quickness of performance and cheapness: it is available from 1 to 5 computerized numerical controlled axes and especially prearranged for the empl
|
|
|
AXIS AX 3J DOWNHILL SKI BOOTS SIZE 25.5 US MENS 7.5 / WOMENS 8.5 287 MM SOLE
PAIR OF DOWNHILL SKI BOOTS MADE BY AXIS. THESE ARE THE AX 3J MODEL. THE SOLE LENGTH OF THE BOOTS IS 287 MM. BASED on THAT: THEY ARE LISTED ONLINE TO BE MONDO POINT SIZE 25.5. FOR US MEN'S 7 1/2 OR A US WOMEN'S SIZE 8.5. THESE BOOTS HAS THREE BUCKLE FRONT ENTRY. HAS CARRYING VELCRO STRAP. Used. In good condition, some wear, pl. see pictures for details. Buyer has to inform of any issues with in 3 days of delivery. As is after that. Any shipping is non refundable.
|
|
|
Okuma LR10-M - 5 Axis CNC Turning Center CNC Live Tools
Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Okuma LR10-M T-2S X 200 5 Axis CNC Turning Center Serial# 0358 Year 1993 Great Condition Specifications: Control OSP 5020 Full Model Number: LR10-M Swing Over Bed: 17.32" Swing Over Carriage: 11.02" Swing Over Cross Slide: 9.06" Max Turn Diameter: 6.69" Max Turn Length: 7.87" Spindle Thru Hole: 3.15" Spindle Motor: 10 HP Spindle Speed: 15-6.000 RPM Number of Tools(Upper Turret) 12 Number of Tools(Lower Turret) 8 Live Tool Speed: 100-6.000 RPM Machine Dimensions: 128"L x 73"W x 65"H Machine Weight: 9.500 LBS Chip Conveyor Full C Axis(2) Turrets Lots Of Tooling Live tool holders. Qty. 9) 90 degree tool holders. Qty. 3) Boring bar holders. ... moreQty. 14) ER-25 collet holders. Qty. 3) T urning tool holders. ¾ square, qty. 16) Turret plugs(when live tooling is not used) qty. 9) PRICE… $29.970.00 For More Information Please Call Maury Cohn 1 800 888 4312
|
|
|
Mint Sage Z-axis 5126-4 Spey fly rod 12 ft 6 inch 5 wt 4 pc
Sage Rods from Angler's Habitat Sage Z-axis Spey Fly Rod You are bidding on a very nice factory Sage Z-axis 5126-4 fly rod. The rod is a 12 foot 6 inch 5 weight 4 piece. This reel seat is perfect. There are some minor marks on the ferrules. This rod has amazing power. The rod will come with the factory rod sock and tube. HAB E Mail any questions and give this rod a new home! Remember: All of our rods have a 30 day inspection period. If you are not totally satisfied you will receive a no questions asked refund. Heck. Take it out for a day or two then decide. Have a rod or reel you no longer want or use? Why not think about trading it in for a new one? Tell us the details. And we'll offer you store credit for whatever we carry! Give us a call at 208-454-8188. When you purchase any of our rods we will give you full purchase value for ... morea new rod in the future. For example. You fish a rod you buy from us for three years, and then Sage comes out with a new line of rods, and you just have to have it. Wife said no. But we will take it in on trade for a new rod and you all you have to do is pay shipping. Now wife is happy, and so are you! We want to earn your business and keep you married! Sorry. We do not take trades in on trade up rods. We ship most items within 3 days of receiving payment. If you need something urgently. Or have a special shipping need, we just ask you to and we'll do our best to accommodate you. We ship all items worldwide. Unless specifically stated otherwise in the item description. We don't mark up our shipping. We will only charge you our actual cost. We take special care with every item and pack it carefully so that it reaches you in perfect condition. To calculate the shipping cost to your area. Please use eBay's built in shipping calculator on this page. You can find this either at the bottom of the page, or in the eBay tab marked"Shipping" above. If you are signed into your eBay account, the shipping cost should be automatically displayed under the"Place Bid&q
|
|
|
PRC MODEL DL 2200 PRIMA 5-Axis Robotic Laser
Avg. Rating: Model: DL 2200 PRIMA 5-AXIS ROBOTIC LASER, Brand: Type: Sheet-W(In. 96.0 in, Sheet-L(In. 120.0 in, Wattage: 2200 w, IPM: X-Travel: 125.98 in, Y-Travel: 88.56 in, Z-Travel: 31.49 in, THIS UNIT IS UNDER POWER AND AVAILABLE FOR INSPECTION IN AN AEROSPACE FACILITY IN CALIFORNIA. IT INCLUDES THE FULLY ENCLOSED LASER ROOM. IF YOU HAVE ANY QUESTIONS PLEASE CALL RICH AT 760-633-4801 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-143e50e3b23-0x104-
|
|
|
REXROTH BERINGER A2FM12.5/61W PAR 01 BENT AXIS HYDRAULIC PUMP, NR: 211.19.2 5.41
SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, AND READ THE IMPORTANT INFORMATION ABOUT DESCRIPTION(BELOW) PLEASE CHECK OUT OUR SALE ITEMS IN OUR STORE! BERINGER BENT AXIS HYDRAULIC PUMP TYPE: A2FM 12.5/61W PAR 01 NR: 211.19.2 5.41 USED APPROXIMATE SHIPPING WEIGHT 150 LBS WITH SKID JP IF YOU HAVE ANY QUESTIONS PLEASE CALL US AT 731-635-3167 Please understand that our items are surplus. They come here from factories that have been closed or from other similar situations. Therefore. We do not have first hand knowledge of their history. We do not have the equipment to test many of these items, therefore, we do not know if they are in perfect working condition. We try to be as accurate as possible with our listings. But we are not experts and many of our items are things we know nothing about. There is no eBay condition description ... morefor surplus items, so please do not rely solely on the standardized condition description from eBay. We use our best judgment on the condition, and include lots of pictures. Please look closely at the pictures. And contact us with any questions or to ask for more detailed pictures if needed before making your decision to purchase. We have no desire to misrepresent. We do honor our 7 day return policy. If you should get an item that does not work. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WE APPRECIATE YOUR BUSINESS. AND WISH TO MEET YOUR NEEDS. ALL PAYMENTS ARE TO BE MADE WITHIN 5 DAYS. IF YOU PURCHASED AN ITEM THAT REQUIRES FREIGHT SHIPPING. SHIPPING ARRANGEMENTS ARE TO ALSO BE MADE WITHIN 5 DAYS. COMBINED SHIPPING IS ALWAYS AVAILABLE. AND THANK YOU FOR SHOPPING WITH US! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SODICK AQ550L, 2002, LINEAR SERVO MOTORS, 5-AXIS CNC WIRE EDM, AWT, CHILLER
SODICK AQ550L NEW: 2002 SPECIFICATIONS: X-AXIS TABLE TRAVEL. 21.6" Y-AXIS TABLE TRAVEL. 13.7" Z-AXIS TRAVEL. 12.6" U& V-AXIS AUXILIARY TABLE TRAVEL. 5.1" TAPER CUTTING. +/ 20 DEG IN 5.9 MAX WORK LOAD ON TABLE. 3.300 LBS APPROX MACHINE DIMENSIONS. 61" X 82" X 83" APPROX MACHINE WEIGHT. 11.000 LBS EQUIPPED WITH: LINEAR SERVO MOTORS- NO BALLSCREWS OR COUPLINGS SODICK LN 1W CNC CONTROL SUBMERSIBLE MACHINING AUTO WIRE THREADING CHILLER ANTI-ELECTROLYSIS(FINE FINISH CIRCUIT) CURRENT CUTTING TIME- 31.896 HRS* SUPERB CONDITION& APPEARANCE* AVAILABLE FOR IMMEDIATE INSPECTION& PURCHASE NOTES ON THIS MACHINE: Linear servo motors. no ballscrews or couplings, Backlash is totally eliminated. Advantages include: Positioning accuracy. Part roundness, improved corner accuracy with vibration free table movement. ... moreSodick made linear motors are applied for x.Y,u,v axes to achieve a quick reactivity. As compared with conventional ball screw drive. MAIN FEATURES- Perfect Motion: From the undisputed leader in linear technology since 1999, this Sodick machine ofers no wear movement as compared to ball screws. No vibrations, and perfect positioning through linear glass scales. All this leads to increased machining speed. Better accuracy and a finer finish. Perfect materials: Sodick uses advanced materials such as ceramics in all products providing the user thermal stability and long term performance. Furthermore. By only using a cast iron machine base. The rigidity and stability of Sodick machines are ensured. Noble materials such as stainless steel are used throught the machine. Perfect features: Automatic wire threading is very fast less than 15 seconds. The windows based control stores all user information. Operation is even easier thanks to its 15" lcd flat screen. ANY QUESTIONS: CALL TROY@ 410-252-5494*
|
|
|
OptoSigma 123-4720 Rack and Pinion Dovetail Stage XY-Axis, 2.5 in x 1.5 in
Fiber Optic Tools and Supplies BUY | SELL | TRADE surpluseq.com Our Description Used OptoSigma Dovetail X. Y Linear Rack and Pinion Stage, 2.5in by 1.5in. This used OptoSigma 123-4720 Rack and Pinion X and Y Linear Stage is working and in Great condition. Sold as pictured. Manufacturer Description When longer ranges of travel are required conventional stages may not be sufficient. For imaging applications it is often necessary to scan a detector over the field and focus volume of image space. These. Long travel, dovetail stages provide the perfect solution. They may be driven by rack and pinion over a large distance without losing their alignment. The coarse drive enables rapid positioning of the stage. Once set in position the stage may be locked by means of a clamp lever so it will not move. If it is required to provide fine movement our ... moreconventional stages have compatible mounting holes and can be attached to these stages. Type, Used, Physical Condition, Excellent, Working Condition, Fully Functional, Testing Condition, Fully Tested, Specifications, Specification, 2.5in by 1.5in 25mm Travel in both directions on X axis and Y axis. Lockable positioning 1/4-20 Screws, Contact, Mailing Address: SurplusEQ 329 W. Melinda Ln. Phoenix AZ 85027 U.S.A. Phone: Toll-Free: 623) 581-9777(877) 967-1904. Business Hours: 7:30am- 4:00pm(Arizona time) Monday to Friday Email: surpluseq.com View our other and. Payment, We accept the following forms of payment: Credit/Debit Cards: Accepted for USA and Canadian eBay transactions pursuant to our eBay Sales Policy* Cards accepted: Visa, MasterCard, Discover Card. And American Express. We may require shipping to the card holder's billing address and signed CC Authorization form. PayPal: Accepted for USA and Canadian transactions pursuant to our eBay Sales Policy* Shipping to a PayPal verified address may be required. Authorization for PayPal acceptance when the item is being shipped to outside of the U.S.A. at our discretion. Contact us with questions. Sales Tax: Arizo
|
|
|
Melles Griot Linear Translation Stage 2.5"x2.5" Single-Axis 13mm Travel, Metric
Used in Good Working Condition Melles Griot Linear Translation Stage 2.5"x2.5" Single-Axis 13mm Travel. With Metric M6 taped Holes
|
|
|
MORI SEIKI ZL-15 SMC 5-Axis CNC Turning Center Lathe, Fanuc Collet Chuck ZL15 SL
MORI SEIKI ZL-15 SMC 5-Axis CNC TURNING CENTER GENERAL SPECIFICATIONS: MANUFACTURED NEW 1996 SWING OVER BED/ CROSS SLIDE 18.1" 11.8" MAX. MACHINING DIAMETER 9" MAX. DIST. BETWEEN SPINDLE NOSES 24.6" X AXIS TRAVEL(UPPER/ LOWER) 8.7" 7.7" Z AXIS TRAVEL(UPPER/ LOWER) 17.7" 15.3" RAPID TRAVERSE RATE X AXES 472 IPM RAPID TRAVERSE RATE Z AXES 590 IPM SPINDLE INDEXING(FULL) 0.001 DEG. C-AXIS SPINDLE SPEEDS(MAIN& SPINDLE) 50- 5.000 RPM SPINDLE SPEEDS(SUB SPINDLE) 60- 5.000 RPM SPINDLE NOSE. MAIN A2-5 SPINDLE BORE(MAIN/ SUB) 2.0" 1.4" SPINDLE MOTOR(MAIN/ SUB) 15 HP/ 7.5 HP MAXIMUM BAR CAPACITY. SPINDLE 1.67" TURRET CAPACITY(UPPER/ LOWER) 12/ 6 STATION TURRET ROTARY LIVE TOOL SPINDLE SPEED 80- 2.000 RPM DIMENSIONS. APPROX. 157" x 73" x 80" WEIGHT. APPROX. 13.200 LBS EQUIPPED ... moreWITH: MORI MSC-516(FANUC 16T) CNC CONTROL, RS-232C PORT INTERFACE FOR DNC OPERATION, AUTO PARTS CATCHER. EJECTOR ON SUB SPINDLE, 16C COLLET CHUCK ON MAIN SPINDLE. LIVE TOOLING, 4" 3-JAW CHUCK ON SUB SPINDLE. 2) TURRETS, SPINDLE SYNCHRONIZATION. BARFEED INTERFACE, RIGHT HAND DISCHARGE LIFT-UP TYPE CHIP CONVEYOR, COOLANT SYSTEM WITH TANK& PUMP, ALL AVAILABLE TOOL HOLDERS. ALL AVAILABLE MANAULS, TWIN-SPINDLE& TWIN-TURRET FOR COMPLETE SYNCHRONOUS-MACHINING/DUAL-PROCESSING* LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this lathe prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide
|
|
|
MSR Lightning Axis Snowshoes 8 x 30 and 5 inch flotation tails
These snowshoes are still fully functional with no issues with the bindings or flotation tails. However. The shoes have a significant amount of scratches from normal use and the left shoe has a slight bend in the frame(very slight, does not affect performance of shoe) Feel free to ask any questions you may have.
|
|
|
Sage Z-Axis 586-4 SG Fly Rod, 5-Wt, 8' 6", 4-Pc, Small Grip - FlyMasters TradeUp
CONDITION This Sage Rod is classified as USED. I further found this rod to be in EXCELLENT condition. There a just a very few surface scratches on the rod blank. Indicating light use. The cloth rod bag is also in excellent condition and has no marks or stains. The rod tube has a few surface scratches, but no dents or dings. All photos in this ad were taken by FlyMasters personnel and are of the rod offered in this auction. DESCRIPTION This is a Sage Z-Axis 586-4SG 5-weight. 4-piece 8’ 6” long fly rod made with Graphite V technology. It is serial number AB59405. The rod is light weight- 3 1/8ozs(88.6g) The rod blank is a beautiful forest green. The action is classified by Sage as a fast action rod. The reel seat is nickel silver with an insert that is Cocobolo wood. The reel seat is an up-locking seat. It comes with a tan rod sock and a brown ... morealuminum rod tube. The“SG” in the denotes that this rod has a Small Grip handle. This is for added sensitivity and/or small hands. Sage has long been recognized as one of the premier production fly rod makers. The Sage story began in 1980 on Bainbridge Island. Washington. The company is still located there. SPECIFICATIONS Length– 9’ 0” 2.74m) Rating– 5-weight Rod Pieces– 4 Rod Weight– 3 1/8ozs(88.6g) Serial Number– AB59405 Rod Sock– Tan Cloth Rod Tube– Dark brown color aluminum DOMESTIC SHIPPING We strive to ship all of our orders by the next business day after receipt of payment. We are successful in doing so in almost every case. We primarily use U.S. Mail- Priority Mail Service because when we consider all factors in shipping. They are our best option- free boxes, low-cost service, fast delivery to all parts of the U.S. from our central location. We use Priority Mail over Parcel Select because of the faster delivery and less time for your purchase to be exposed to the hazards inherently involved in shipping by any method. INTERNATIONAL SHIPPING Again we strive to ship all of our international orders by the next business day. We also primarily use U.S. M
|
|
|
Jungner 460 CNC 5 Axis CNC Tool & Cutter Grinder!
General Specifications As Per Brochure(Please Verify Details) Weight Between Centers: 80 Lbs. Weight Chucking: 55 Lbs. Workhead Through Hole Diameter: 1.12" Work Table: 31.5" x 4.5" Workhead Internal Taper: ISO- 50 Number Of Wheels: 4 Workhead Type(Swivel Base) Fixed W/360 Deg Spindle Cartridge Diameter: 2.4" OD Grinding Range: Minimum: 1/2" Maximum: 9" Grinding Length: 28.75" Wheel: Wheel Diameter: 6" Wheelhead Angle: 360 Deg. Motor: 5.5 hp Maximum Speed: 11.200 rpm X-Axis Travel: 18.1" Y-Axis Travel: 11" Z-Axis Travel: 9.6" Equipped With: Tailstock High Pressure Coolant System Full Coolant Enclosure Mist Collector/Smog Hog Precision Workholding(250- 2" End Mill Software(Square, Ball Bse, Corner Radius Drill Tool Software(Dijet, Sumitoma, Mitsubishi, Step Tool Software(Port Cutters, ... moreReamers, Form To Tribolube Central Lubrication System Base Material- Meehanite Cast Iron Ways- Hardened& Ground V-Shaped With Precision L Ball Screws- 1.25" Diameter 5mm Pitch Precision G RS-232 Interface 32 Bit Buss Background Edit 9" Diagonal CRT 262' Part Program Storage PMC-N Ladder Simultaneous Movement Of All Axis Helical Interpolation Inch/Metric Custom Macro B Program Restart Custom Marco 200 Variables Remotely Mounted MPG Mirror Image Cutter Compensation C Manual Simultaneous Axis Control High Speed Skip Function Machine: 111" x 99" x 92" 2.700 lbs Hoffman Filter: 73" x 53" x 64" 1,500 lbs For any other information please contact Mike Reeves mike@automatics.com
|
|
|
USED AMADA HFB-2204 4 AXIS CNC HYDRAULIC PRESS BRAKE 242 TON 14.5' GREAT MACHINE
USED AMADA MODEL# HFB-2204 CNC DOWN ACTING HYDRAULIC PRESS BRAKE YEAR: 1993 Specifications: Tonnage: 242 ton Max bending length: 174” Distance between housings: 148” Open height: 17.7” Stroke: 7” Throat depth: 16.1” Backgauge travel: 27.5” Approach speed: 236 IPM Bend speed: 2-19 IPM Return speed: 2-189 IPM Oil capacity: 50 gallons Machine dimensions: 182” x 87” x 118” Weight: 35.200 lbs Equipped with: 4 Axis(X1/X2. Y1/Y2) Operateur CNC Control allows operator to program in three modes: depth. Angle, and 3-D graphic angle. Four computerized gauging fingers Full set of Amada sectionalized ram clamps(European style) Unique composite lower bed to insure parallel deflection regardless of bending tonnage. We will ship this item and cost will vary by buyer location. If you need a shipping rate just let us know. Please contact us. 800 899 8182 ext. ... more208 Check out my! PLEASE READ! Do not answer any second chance offers or any other offer to buy this machine outside of Ebay. Scam artists are sending our bidders fake emails that look like official Ebay messages. If you have any questions about emails sent to you please call and verify that it came from us. 800 899 8182 ext.208 Be sure to add us to your favorite sellers list for daily additions! Loaded on truck– No charge For more specs on this machine and others please visit www.westbrook-eng.com Payment is expected within 7 days of auction end. Buyer is responsible for all freight charges. 6% Michigan sales tax where applicable. Machines will need to ship on a flatbed truck. If planning to ship in an enclosed trailer it will need to be crated. Crating charges are extra. If you have any questions or if you would like to schedule an inspection please contact us here in Warren. Michigan toll free at 1-800-899-8182…ext.208…Good Luck and Happy Bidding. Provisions: It is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use. Operation or set up, and to safeguard adequately the machine or machi
|
|
|
6.5" Fadal 4th Axis Rotary Table
Rotary table in good working condition. Model VH65. Ratio 90:1
|
|
|
OPTO-SIGMA 2.5" X 2.5" X .75" X-AXIS PRECISION LINEAR SLIDE
CLEAN USED LNC OPTO-SIGMA PRECISION LINEAR SLIDE. X-AXIS 2.5" X 2.5" X 0.75" Comes With 30-Day Warranty. S/H $9.00 for the Continental U.S. Only. BKW: CIN
|
|
|
Emco Compact 5 PC CNC Lathe Main Ballscrew Z Axis Ball Screw #4 0130
Condition: This ball screw assembly is in excellent mechanical condition albeit some oil/ oxidation stains from sitting around. The assembly is complete with timing gear. 2 mounting blocks, 2 support bearings and 3 sets of mounting bolts. Notes: The plastic double ball nut housing has been re-enforced with an aluminum plate(u-shaped bottom part) This was done by me. The plate adds to the rigidity of the Z axis. I also adjusted the double ball nuts for tension with the housing set screw and increased the tension on the ball screw wiper so it cleans the screw more effectively as the lathe is run. Shipping: Charges shown are flat rate to US or Canada and EU. I combine shipping when possible. I ship from Ann Arbor. Michigan 48103. I accept Paypal(preferred) Personal checks(domestic buyers only) and money orders. Please allow extra time for non-Paypal ... morefunds to clear. Returns: Policy Updated 2012 I offer a 30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a mistake in the listing, I offer a full money back refund(with shipping both ways) but you must return the undamaged item to me. I do not offer partial refunds and or replacements; I only offer my refund policy as stated above. In the event of loss or damage in shipping(that is out of my control) You agree to cooperate so I can file an insurance claim for the loss or damage and issue a refund to you. If you win this auction. You will be expected to execute a Paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1440c49204a-0x109-
|
|
|
HAAS VF3 97/3 5-AXIS READY
HAAS VF3 97/3 5-AXIS READY IN GOOD CONDITION.
|
|
|
Hetalia Axis Powers Vol 1 2 3 4 5 Manga Graphic Novel Comic Tokyop New
BRAND NEW ITEM! Brand new. This is extra stock from our store THIS LISTING IS FOR 5 NEW MANGA BOOKS: Hetalia Axis Powers Vol 1-5 ENGLISH Manga Graphic Novel Comic Tokyopop Only 2 sets left in stock. World War what? It's all about getting to know each other(or at least trying to) in this second volume of Hetalia Axis Powers! With the Hetalia Academy. Tons of new character introductions, and preparing for the Olympics, there's no time left for the battlefield! But leave it to Italy's ancestor, that jerk" England, and pushy America to stir things up while good old Canada, quiet Japan, and sweet little Liechtenstein respectfully go about their day. Isn't it about time they all started getting along? Story and art by Himaruya Hidekaz. For more great anime items. Check out my other items! Please read the following terms before ... morepurchase* Payment methods: Paypal(perfered) Please verify your mailing address with your paypal account before purchase Return Policy: All Sales considered FINAL! No return or exchange on merchandise. Shipping Information: We will ship all orders by USPS within 1-2 days after payment transaction completes. However. All items may also for sale at our store and anime conventions we attend. Therefore, items may be sold the very same period time you may purchase here at our ebay store. We will notify buyer immediately if the item is no longer available and give the options of full refund or back order. BACK ORDER: Back order item takes 2-6 weeks. Buyer can cancel order and get full refund any time. International shipping: International shipping insurance for USPS first class international mail is NOT availabe. We will provide the USPS international customs form# when we ship item(s) to overseas. Buyers are able to see when the package(s) is accepted by USPS on USPS.com, however, this website can NOT provide any further tracking information after the package leaves US boarder. Please contact us for options of shipping with insurance by USPS Priority Mail. We will not ship to so
|
|
|
Axis Powers Unite, Tripartite Pact, WWII 1940 5 Front Pages Germany,Italy Japan
5 Fron t Pages from September 28 t hrough October 2. 1940 September 28th U.S. to Defy Thre at of Nazis. Japan by Giving Britain Aid Germany. Italy Nippon Join Arms for 10 Years Axis Treaty Not War Act. Japan Explains London Interprets Pact as Attempt to Intimi date America Se p tember 29th U.S. Defies Axis Bloc. To Widen British Aid; Japs Wa rn of Action Nippon R eady for Role in Creating New Era September 30th Keep Out. Itali ans Warn U.S. Russian s See War Spreading Closer American. British Ties Seen by Moscow Japan Silent on Soviet Pact Octob er 1st Berli n Bo mbed Five Hou rs; London Raid De aths Rea ch 5.000 Soviet Pact Sought by Trip le Alliance October 2nd Nazis Expect Japan. Russia to Sign Pact Aimed Against U. S. Mos cow Shows Sy mpath y to New Axis Trea ty Nazis Expect So v iet Pact with Japanese Berlin Foresees Russia Opposing ... moreInterests of America 5 pages total: September 28 through October 2. 1940(Front Page only) Ask about our other Seattle PI Newspaper Collections! All newspaper pa ge s are suitable for framing. We also have over 1.000 Seattle Post-Intelligencer(Seattle PI- Front Page only) from 1940. 1941, 1942, 1943, 1945, 1950& 1951. They are in good condition and will be shipped in tubes. see scan for details. Of course we combine shipping! Summary of My Selling Policies Payment Hello! Thank You for your interest! We love payment by PayPal it just makes it faster and easier! and 2 days for PayPal E-checks for processing. We kindly request notification of payment form. By Email, within 24 hours of Auction end if not paying by PayPal so we know to continue to hold it for you. Please have your item paid for before 5 days after Auction ends! We have a 100% Satisfaction Guarantee to take care of our customers in any way possible-there are exceptions to our policy-please read carefully the terms of our company guidelines. RETURNS ARE ACCEPTED ONLY IF THE ITEM(S) DOES NOT MATCH THE AUCTION DESCRIPTION WITH IN REASON-MINOR VARIANCE DOES NOT CONSTITUTE A REFUND. BUYER MUST SUBMIT IN WRIT
|
|
|
ALLEN BRADLEY 2094-AMP5 SERIES A BULLETIN 2094 5 AXIS MODULE KINETIX 6000
YOU ARE BUYING ONE ALLEN BRADLEY 2094-AMP5 SERIES A BULLETIN 2094 5 AXIS MODULE KINETIX 6000. THIS IS USED SURPLUS REMOVED FROM A WORKING SYSTEM AND SI GUARANTEED WORKING. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. MWUPTS*C X5) ESTIMATED RETAIL PRICE $1.615.00 International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your!
|
|
|
Bulgaria Germany Third Reich Nazi Axis Horse Supply Wagon Soldier 5 Stamp WW2 1
Bulgaria Germany Third Reich Nazi Axis Horse Supply Wagon Soldiers 5 Stamp MNH WW2 Own a few pieces of History. Judge for yourself Please wait for invoice for combine shipping MNH Mint not Hinged MH Mint Hinged may have hinge or part hinge attached. MLH Mint Light Hinged MNG Mint No Gumm on stamp. Used Used stamps. Described to the best of my ability. Feel free to email with any question. Thanks for looking. Happy bidding and good luck. Please read. We do combine shipping for Seven days Highest Shipping Price for First item then.50 cent each additional Coin& stamp lot Single Stamp. Stamp lot or Note. Pay no more than $1.99 in shipping cost In US& Canada and $2.99 in shipping cost Europe& South America. On Same Invoice. Unless otherwise Stated in description. Items are shipped one to Five business days after payment is made or ... morereceived. Not responsible for postal delays or lost mail. PayPal only Payment due within 7 days after auction has ended. All sales final. Please contact before leaving negative or neutral Feedback. It can be worked out. Serious bidders only.Thank you.
|
|
|
Axis Camera Station - Additive License - Additive License - 5 User
Axis Camera Station- Additive License- Additive License- 5 User CAMERASTATION-5LICENSEADDON Standard, Product: Axis Camera Station- Additive License- Additive License- 5 User CAMERASTATION-5LICENSEADDON Standard, SKU: 0202-014, UPC: 667026007453, Brand: Axis, Condition: Brand New Factory Sealed with Full USA Warranty Sale Details: | |» General Information Manufacturer, Axis Communications, Manufacturer Part Number, 0202-014, Brand Name, Axis, Product Name, Camera Station- Additive License, Product Type, Software Licensing, Product Information Software Name, Camera Station, License Information License Type, Additive License, License Pricing, Standard, License Quantity, 5 User, About Us DataVision's flagship 30.000 sq/ft SuperStore is located in Midtown Manhattan, at 445 Fifth avenue@ 39th street adjacent to the New York Public Library. ... moreOur family owned store has provided exceptional selection, prices, and service to our customers for 20 years. DataVision SuperStores are the most advanced computer retail environments in the country and are often used as showcases for major manufacturer product releases. We are an authorized dealer for virtually every product we offer. Ship to Address We ship only to the valid address on file with Paypal. For security reasons. We are unable to alter the addres or redirect the package after payment has been made. Alaska/Hawaii/Puerto Rico Currently. We do not ship to Alaska, Hawaii, or Puerto Rico. In the event an order does go through an insufficient shipping was calculated, we reserve the right to bill additional shipping. Signature Required Many of our orders require a signature upon delivery. Please make sure you will be available at your address to accept the package.Feel free to inquire with any questions. APO/Military Addresses Unfortunately. At this time, we do not ship to APO/Military addresses. Returned To Sender Carrier will make 3 separate delivery attempts in a row before returning the package to us. In the event of 3 failed attempts. You will be re
|
|
|
AXIS YLCT-5 3-Outlet Heavy-Duty Grounding Adapter (Orange)
Fast Shipping! AXIS YLCT-5 3-Outlet Heavy-Duty Grounding Adapter(Orange) Converts Single 3-Prong Ac Outlet To 3 Outlets Features Heavy-Duty Abs For Durability Safety Orange Color 15 Amps Returns Accepted.
|
|
|
2002 Mori Seiki MT-2000SZ 5-Axis CNC Mill/Turn Center
General Specifications As Per Brochure(please verify details) Stock# 322794. CNC Control: MSG 501 Chuck Size: 8" Max Diameter Bar Capacity: 2.5" Max Swing Over Bed/ Carriage: 33.4" 17.3" 23.6" Max Turning Diameter/ Lower Turret: 21.6" 11" Max Machining Length: 40.1" Distance Between Spindles: 50.4" Spindle Motor: 20/ 15 HP Spindle Speed: 4500 RPM Spindle Bore: 2.9" Spindle Nose: A2-6 Tools: 120 Rapid Traverse Rates(X& Z/ Y) 945/ 630 IPM Milling Motor: 25/ 20/15 HP Milling Speed: 8000 RPM Sub Spindle Chuck Size: 6" Sub Spindle Motor: 10/ 7.5 HP Sub Spindle Speed: 6000 RPM Sub Spindle Bar Capacity: 1.7" Lower Turret Tools: 12 Lower Turret Milling Motor: 10 HP Lower Turret Milling Speed: 4000 RPM Tool Change Time(T-T) 1.6 Seconds X-Axis Travel/ Lower Turret: 22.2" 6.1" ... moreZ-Axis Travel/ Lower Turret: 42.4" 36.7" Y-Axis Travel +/ 3.1" B-Axis Rotation +/ 120 B-Axis Index: 001 Degrees C-Axis Index(Main& Sub Spindle) 001 Degrees Gear Ranges: 2 Tool Change Time(T-T) 1.6 Seconds Max Tool Diameter: 3.5" 4.9" Max Tool Length: 11" Max Tool Weight: 15.4 lbs. Equipped with(must be verified by buyer) SLU-2 Programmable Steady Indexable on Lower Side Cool Jet High Pressure Through Spindle Coolant System 320 Meters Mapps Programming Polar Coordinate Interpolation Cylindrical/Helical Interpolation Thread Cutting Retract Riggid Tapping Mill Head Balanced Cutting Second Spindle Orientation Custom Macro B Interface Check for the Turning Area Axis Recomposition 720 Offsets 8" Chuck Front 6" Sub 3 Jaw Hydraulic Chucks C.Y, 7 B-Axis Milling Capability 120 ATC Magazine Renishaw Probe Tool Presetter Front and Rear Low Pressure Detecting Switch Auto Power Off Chip Conveyor/Mist Buster Air Filtration Dimensions: Machine 16' x 10.4' x 10'8" 29.000 lbs Chip Conveyor: 19'6" x 3.5' x 6' x 3.500 lbs Please contact Mike Reeves for more detail or if you would like to set up an inspection today. 303-65
|
|
|
=Axis and Allies Miniatures Eastern Front Entrenched Antitank Gun 5/60 #5 Com x3
Axis& Allies Miniatures Eastern Front Entrenched Antitank Gun x3 Wizards of the Coast This(These) figure(s) is(are) Used and played. But in good shape. No damage but some turrets may be bent. Common with this early set. The stat card(s) is(are) included. Email me with any questions. This is for the axis and allies land miniatures game by Wizards of the Coast. U.S. and shipping and HANDLING cost is $2.75 for the units and for every extra auction you win of mine shipping can be combined for $0.50 per additional auction. You can combine the items over several days of auctions(up to about 10-14 days) just pay the invoice when you want your order shipped. Understand that there is more to the cost of handling and shipping than just postage. There is the cost of packaging materials, boxes and card plastic sleeves, eBay insertion fees, eBay final ... morevalue fees, and PayPal fees. If you like these styles of auctions its important that you rate us and other sellers high on the DSLs. I ship fast my goal is to get these pieces to you before your next round of war games. I package all my items to ensure the safe and sound delivery of my items the cards are in a hard plastic protective sleeve. Or a card box. International bidders and Canadian Bidders add $7. Sorry but international rates have gone threw the roof. Packages are pretty much standard at $12-$13 a package. Most international orders are delivered within 2 weeks however some countries have taken as long as 7-8 weeks, which is beyond my control. Thanks and Happy bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Axis & Allies National Control Markers from Europe. 80 pieces. Set #5
This auction is for a set of National Control Markers from the Axis& Allies Europe game. Here is what you get: 20 German 20 Russian 20 British 20 American You use these markers to show control over territories that have been conquered by enemy countries. Also used to keep track of your income on the National Production Chart. Total 80 pieces. Shipping will be USPS First Class Package. I do combine for multiple item wins. If you win more than one item from me. Please wait for an invoice and I will have the correct shipping amount on there. Thank you. FAIR WARNING: I am a smoker and have been told that some of my items have a smoky smell to them. I just want to give any potential bidders a head's up.
|
|
|
Axis & Allies 5 Axis Units Uncommons-Commons
Headquarters: U. German 3 X Wehrmacht Veteran Infantrymen. C. Japanese 70mm Type 92 Artillery. U.
|
|
|
Axis & Allies War at Sea French Battleship Richelieu Rare #5/64
Gun factors of 15.15,14,12 Anti air factor of 7 Extended range 5 Excellent spotting Torpedo defense 1
|
|
|
WotC: Axis & Allies War at Sea - 5 FINISH MINATURES WITH CARDS
THIS AUCTION. Satisfying your treasure seeking desires, includes a lot from Wizards of the Coast for the Axis and Allies Miniatures Game: War at Sea- 5 FINISH MINATURES WITH CARDS B-239 BUFFALO X3 VAINAMOINEN X2 This lot is in near mint condition(see item Rating System below) BORING(but important) STUFF! Domestic Shipping- Each addition item is $1.50 more for shipping and handling. Priority Mail includes a tracking number. But not a padded mailer. USPS Media Mail includes a padded mailer and a tracking number. Larger items are packed in boxes. International Shipping- I offer USPS Global. Air Mail, and Surface Mail for each option if applicable. Please contact me for quotes. USPS Global does not include a padded mailer, but Air and Surface do(again, if applicable) I cannot supply tracking numbers to overseas destinations, because the USPS ... moredoes NOT offer this service. Additional International Shipping Rules- Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as‘gifts’ US and International government regulations prohibit such behavior. Payment- I can accept payment in personal check(item is held until the check clears) MO, cashiers checks, but I prefer PAYPAL! Please send paper payment with 10 days of the end of the auction or Guido may visit(I know Guido the Gypsy- kinda lame, but its catchy) Common Misconception(or Reality Check) Please understand. This is not a business. I do this for fun, but I do have a regular full-time job that often dominates my time along with a family and a home. If I do not answer emails right away, please understand, I
|
|
|
LOT Axis Allies WAS IJN 2nd Carrier Air Group 5 x Miniature aircraft models #61
YOU can Simulate a Great WW 2. Air/Naval Engagement centered around an Allied Convoy, with the Aircraft from refitting Japanese Carriers, which could be called: IJN 2nd Carrier Air Group" This force consists of the 5 Miniature Axis& Allies Plastic Model aircraft offered in this Auction. Utilizing the Axis& Allies"WAR at SEA" game system. All of these model aircraft also come with their own Axis& Allies Game card. I have described a hypothetical scenario in other current listings that could utilize the model aircraft in this auction. They are those associated with the listing called Port Moresby Convoy 1942. This Hypothetical Scenario envisions a Naval Action against air. Surface and subsurface forces, as an Allied convoy sets sail from Hawaii, en route to Port Moresby, New Guinea, in May of 1942, to deliver much-needed ... moretroop reinforcements and supplies for the beleaguered Australian garrison. With this reinforcement it is hoped that the US/Australian line can be held against the Japanese advance over the Owen Stanley Mts to capture the key port of Port Moresby. From this strategic point, the Japanese can dominate the Coral Sea, effectively cutting off supplies from reaching Australia. The Allied convoy is opposed by a host of threats, including Japanese subs, and even a squadron of U-boats on loan to the IJN, all laying in wait in"Torpedo Alley" south of Guadalcanal in the Coral Sea, along the convoy's route. In addition, Allied intelligence believes there may be an attempt to intercept this convoy by a powerful Japanese Naval force of cruisers and light carriers, operating out of the Japanese base at Rabaul. Moreover, the Japanese 1st Carrier Air Group. Consisting of the Zeros, Vals, and Kates off of the refitting carriers, Zuikaku and Shokaku, have been based at the airfields around Lae in northern New Guinea. Now these land-based carrier aircraft have been reinforced by the 2nd Carrier Air Group from the refitting carriers. Junyo and Hiyo. Can these land-based planes fr
|
|
|
NO RESERVE 5c axis error strike 1936 Vintage BUFFALO INDIAN COIN NICKEL 5 cents
vintage Antique 5 cents coin 1936 BUFFALO INDIAN HEAD NICKEL NO RESERVE IN VERY GOOD CONDITION. 5 cent error coins alignment Misaligned Die axis DIE ERRORS. Description: Misaligned die axis error strike misaligned Die axis. 4%6% offset During the installation of the dies. They need to be well aligned. If not, it can cause this error. Coins showing different die axis arrangements are the result of a die in a wrong position in relation to its mate have a premium value over their regular counterparts of the same date. 1936(666Z) FOR COLLECTORS: There is a small F under the date. If that means anything? Is it an Error rarer or a mistake? Also a small E above the buffalo on the opposite side. Thank you. THIS IS FOR A VERY NICE 1936 BUFFALO/ INDIAN HEAD NICKEL IN Very Good ORIGINAL CONDITION. INDIAN HEAD NICKEL WITH BUFFALO REVERSE.IN AVERAGE CIRCULATED ... moreCONDITION CLASSIC AMERICAN DESIGN HONORING THE NATIVE AMERICANS. The photos are the actual coin you will receive. Beautifully detailed(1936) Buffalo Nickel. VG) Condition. Nice Features and Details. This coin will make a welcome addition to any collection. Also. Great gift idea choice for any occasion. Details on this coin are consistent throughout the obverse and reverse. The low price makes this coin an excellent investment. Please keep in mind that I am not a professional coin grader, so this is my opinion on the condition of this coin, but the pictures provided will show you the coin you will receive. You can judge from these photos the beauty of this coin. The Buffalo Nickel was designed by James Earle Fraser. His main argument for the design was that Native Americans and buffalo. Together, could not be found in any other country, and therefore it was appropriate to have two such unique images used as symbols on an American coin. Unlike James Longacre, who designed the Indian Head Cent, Fraser used real Native Americans as a model for the figures on his coin. In fact, he used three. Fraser used three chiefs as models, then combined their features to form a
|
|
|
MIKRON UCP1000 5-AXIS HIGH SPEED MACHINING CENTER B27162
Inventory# 27162. MIKRON UCP1000 5-AXIS HIGH SPEED MACHINING CENTER Preliminary Specification. Please call 847-427-3333 to verify. Catalogue Specifications. Table Size: 31.5" Diameter X-Axis Travel: 39.4" Y-Axis Travel: 39.4" Z-Axis Travel: 25.75" Spindle Index Range: 135 Degrees Rotary Table Tilt Range: +/ 45 Degrees Rapid Traverse Rate X.Y,Z: 1181 IPM Spindle Speed: 15.000 Maximum Spindle Taper: Cat 40 Spindle Motor: 36.19 HP EQUIPPED WITH: Heidenhain TNC 426PB CNC Control Ruckle NC Tilting Rotary Table 30 Position ATC High Pressure Coolant Chip Conveyor Approximate Overall Dimensions: 190" L-R x 102" F-B x 127" HApproximate Weight: 40000 Lbs Serial Number: 71.15 Year(New 1999) Preliminary Specifications Subject to Verification. Questions about this item? Email us at OR Call our Sales Staff at 1-888-254-8808 ... moreTerms of Sale: Payment All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Fees Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. Machinery and Equipment Some machinery and equipment is located at Fortune 100 Manufacturing Facilities. Most of the machinery and equipment located at these Facilities is disconnected and cannot be seen under power. Unless specifically listed in writing by PMS. All machinery and equipment uses 3 Phase power. All machine sales are subject to machine availabilty. Loading/Freight Charges All rigging. Insurance and freight charges are the responsi
|
|
|
MAZAK INTEGREX J300 5-AXIS CNC LATHE B32245
Inventory# 32245. MAZAK INTEGREX J300 5-AXIS CNC LATHE Preliminary Specification. Please call 847-427-3333 to verify. Catalogue Specifications. Maximum Swing: 26.77" Maximum Cutting Diameter(Chucking) 19.69" Maximum Cutting Length: 24.76" Spindle Nose: A2-8 Spindle Bore: 3.54" Maximum Bar Capacity: 3.15" Spindle Speed: 35- 4000 RPM Spindle Index(Programmable) 0.0001" Spindle Drive(AC- cont/30 min) 20 HP/ 25 HP Turret Type: 1 Position. ATC Magazine Capacity: 20 Tools Tool Selection Method: Random Tool-to-Tool ATC Time: 2.5 Sec Max Tool Diameter: 4.92" Max Tool Length: 15.75" Max Tool Weight: 22 Lbs Rotary Tool Taper/ Tooling: Kennametal KM63 Rotary Tool Spindle Speed: 35- 12.000 RPM Rotary Tool Spindle Drive: 30 HP Z-Axis Travel: 27.36" X-Axis Travel: 24.21" Y-Axis Travel: +/ 4.92" B-Axis ... moreRotation: 220°(30° to +190°. 5° increments) C-Axis Rotation: 0001° Increments Tailstock Taper: MT#5 Tailstock Body Travel: 40.39" EQUIPPED WITH: Mazatrol Matrix Nexus CNC Control Live Milling 20-ATC Automatic Tool Changer 10" Chuck Coolant Thru Milling Head(71 PSI) Programmable Tailstock Tool Eye Chip Conveyor Approximate Weight: 27100 Lbs Serial Number: 225474 Year(New 2011) Preliminary Specifications Subject to Verification. Questions about this item? Email us at OR Call our Sales Staff at 1-888-254-8808 Terms of Sale: Payment All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Fees Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to i
|
|
|
Fadal VMC 4020HT 5-Axis 2012 ReManufactured by Wesco with 5-Axis Rotary Table
HAAS Model 4020HT 5-Axis Vertical Machining Center 2012 Remanufactured by Wesco S/N 1209926896 With Extended Z-Axis Travel of 28" Large Capacity(30) Position Automatic Tool Changer, Equipped With Fadal 5-Axis Rotary Table, 6-3/4" Diameter, Trunnion Style. See Description Below For Information. Please feel free to come and inspect in person. Call for appointment and directions to our warehouse. Contact: Don Lewis 805-427-4287 See Specs Below. Reasonable offers considered! To go to the WESCO Website: See the descriptions and features below PRELIMINARY SPECIFICATIONS- SUBJECT TO VERIFICATION: TABLE SIZE: 47.94" X 20" X-AXIS: 40" Y-AXIS: 20" Z-AXIS: 28" Extended Travel Option) CUTTING FEED RATE(X.Y,Z) 01- 250" RAPID FEED RATES(X.Y) 700 IPM" Z) 600 IPM MAXIMUM TABLE WEIGHT: 1.500 LBS. WEIGHT EVENLY ... moreDISTRIBUTED) SPINDLE SPEEDS: 40-10.000 RPM MAIN MOTOR: 22.5 HP SPINDLE TAPER: 40 AUTOMATIC TOOL CHANGER POSITIONS: 30) CONTROL: CONTROL: FADAL CNC88 5-AXIS EQUIPPED WITH: 2012 RE-MANUFACTURE BY WESCO MACHINERY GROUP 28" EXTENDED Z-AXIS TRAVEL FADAL 6-3/4"DIA. 5-AXIS ROTARY TABLE(30) POSITION ATC OPTION FULL SPLASH GUARD ENCLOSURE COOLANT SYSTEM DIMENSIONS(APPROXIMATE) L-R 116" x F-B 87" X 101" HIGH APPROXIMATE WEIGHT: 10.600 LBS. INSPECTIONS: Please feel free to call me to inspect and/or discuss anything you cannot see in the photos. Ask for Don 805-427-4287 Also we encourage you to come and inspect this machine in person. Please call for appointment. KEEP SCROLLING DOWN TO SEE ALL(8) PHOTOS! To get a better idea of what the item really looks like please CLICK on the photos at the right to get a LARGER. Clearer view Shipping Arrangements: Let us know if you need a freight quote and we can put you in contact with a company that can quote a freight rate. If you plan to export we can provide you information for ocean freight services. If you pick the item up at our warehouse location in Ventura. CA We will load for FREE(Open Deck Trailers Only) You can use t
|
|
|
Sage 796-4 Z-Axis 9.5 ft, 7 wt Fly Rod
Lightly used Sage Z-Axis 796 fly rod. It is 9' 6" in four pieces and is for a seven weight line. The rod is marked"Magical Rivers Guide Service- Bob Thorsen. The cork handle. Reel seat, hardware, guides and wraps are all in great condition. The listing includes the rod, rod bag and Sage aluminum rod tube. Private collector, not a re-seller, middle man or other. Moving, need to minimize. Will ship international at cost. The Sage Z-Axis Rods have combined a refined feel with new technology and created one heck of a rod. The Z-Axis replaced one of the most popular rods in the world. The XP. Using new Generation 5(G5) graphite rod building technology Sage has trimmed some weight off while creating a stronger rod with more feel at the tip. It's a fast action rod that is quite different from the norm. It's fast alright, but ... moreit's fast in that it throws the line for you as you stroke your cast, rather than punching line out there with a brute force type cast. Not only will it get your line out there with ease, you'll find that mending and throwing heavy rigs can also be achieved with little effort. The Z-Axis is forgiving and great for any angler's skill set.
|
|
|
Axis Thinsulate Boys Size 5 Snowboard Boots
You are looking at a pair of boys Axis Thinsulate size 5 snowboard boots in used but good condition.We bought them used and our son wore them once or twice last season and has outgrown them. Still lots of wear left in these boots. Posted with
|
|
|
Huffman HS75R - 5 AXIS CNC Tool & Cutter Grinder
Huffman HS75R- 5 AXIS CNC Tool& Cutter Grinder*Very Good Condition* Huffman HS75R 5 Axis CNC Tool& Cutter Grinder with Tooling Machine is currently under power. Please call me at 760/662-9299 if you would like to set up an appointment to see it running. Winning Bidder is responsible for shipping charges and arrangements. A Sales Tax Charge will be applied to final sale price if Winning Bidder is located in the state of California unless Resale permit is submitted. Winning Bidder please wait for invoice before checking out. We will load machine onto your truck with our forklift Machine is located in Northeastern Ohio If you have any questions please call or email me at the address listed below. Please see my other listings for more great machinery and cutting tool deals!
|
|
|
Mori Seiki ZL-15sm CNC Lathe 5 Axis Mach Emc2 Ballscrews Sub Spindel Turret
We have for sale a mori seki ZL15sm 5 axis lathe. We would also be interested in selling assemblies from this machine such as turret. Spindle, sub spindle, ballscrews, etc. This would be excellent as a parts machine or for a special machine application. All motors have been removed however it still retains the lubrication system and limit switches. This machine Is in good mechanical condition, and was only taken out of service due to a control issue. If you have any questions or wood like to make an offer please call or text me at 573-578-9890 We would be happy to help with shipping arrangements and load free of charge. Posted with
|
|
|
Axis Camera Station - Lizenz - 5 zusätzliche Kameras
Eigenschaften Systemanforderung RAM-Speicher, 1024 MB, Minimum Prozessor, Pentium 4. 3 GHz, Kompatible Betriebssysteme, Windows XP Professional SP2. 2000(SP4) 2003 Server(SP1) Sonstiges Model Nr. 0202-012, Daten teilweise bereitgestellt durch: ICEcat.biz Unsere Artikelnummer: 11689268 Freihaus Egal. Wieviel Sie bestellen Egal. Was Sie bestellen. Abwicklung Sie erhalten die Kontodaten direkt in der Kaufabwicklung. Wir versenden sofort nach Zahlungseingang. Versand ist immer versichert. Frei Haus Lieferung nur bei Lieferanschrift in Deutschland. Zahlungsmethoden: Überweisung. Paypal Informationen Sie können ihre Vertragserklärung innerhalb von 1 Monat ohne Angabe von Gründen in Textform oder durch Rücksendung der Sache widerrufen. Details zum Widerruf finden Sie auf unserer! Lieferung nur innerhalb der Europäischen ... moreUnion. ein Angebot von: oli.k computerservice e.K. Ulrichstr. 5 01326 Dresden Änderungen am Design sind jederzeit möglich. Alle Abbildungen sind symbolisch. Texte und Bilder sind urheberrechtlich geschützt
|
|
|
Thorlabs MT3 XYZ Linear Translation Stage, 3-Axis w/ Micrometers, 0.5" Range
Thorlabs MT3 XYZ translation stage in excellent condition. Three micrometers included. 0.5" travel range, 0.001" per division. Base plate and alignment pins included. The MT series of translation stages have a 1/2" 13 mm) translation range and feature hardened steel linear bearings for precision motion and long life. The quick-change modular design utilizes precision-aligned dowel pins to ensure orthogonality between stages and allows the user to reconfigure stages quickly as applications change. For additional information. See Thorlabs product page at the link below. Thorlabs list price $879. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 ... moreNormal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false Payments. Shipping, and Returns: We allow a 14-day right of inspection. Any r eturn shipping must be by traceable and insured means. Buyer will be responsible for all shipping costs. Items are typically shipped within 1-3 business days following a cleared payment. We minimize buyer's cost by re-using shipping supplies and selecting the lowest rate service available. Buyer may request alternative shipping services. Including overnight delivery when available. Multiple items will be automatically combined into a single shipment when possible. Pennsylvania residents pay sales tax. International buyers are welcome. All international payments must be made through PayPal. International buyers are solely responsible for import duties and/or brokerage fees. We offer low-cost shipping by USPS Priority Mail International when available. Please note that typical internation
|
|
|
5c die axis error strike 1937 ERROR Antique BUFFALO INDIAN COIN NICKEL 5 cents
vintage Antique 5 cents coin 1937 BUFFALO INDIAN HEAD NICKEL NO RESERVE IN VERY FINE CONDITION. 5 cent error coins alignment Misaligned Die axis DIE ERRORS. Description: Misaligned die axis error strike misaligned Die axis. 6%8% offset During the installation of the dies. They need to be well aligned. If not, it can cause this error. Coins showing different die axis arrangements are the result of a die in a wrong position in relation to its mate have a premium value over their regular counterparts of the same date. 1937(666K) FOR COLLECTORS: THIS IS FOR A Mind blowing 1937 BUFFALO/ INDIAN HEAD NICKEL IN Very Fine ORIGINAL CONDITION. The photos are the actual coin you will receive. Beautifully detailed(1937) Buffalo Nickel. VF) Condition. Nice Features and Details. This coin will make a welcome addition to any collection. Also. Great gift ... moreidea choice for any occasion. Details on this coin are consistent throughout the obverse and reverse. The low price makes this coin an excellent investment. Please keep in mind that I am not a professional coin grader. So this is my opinion on the condition of this coin. But the pictures provided will show you the coin you will receive. You can judge from these photos the beauty of this coin. The Buffalo Nickel was designed by James Earle Fraser. His main argument for the design was that Native Americans and buffalo. Together, could not be found in any other country, and therefore it was appropriate to have two such unique images used as symbols on an American coin. Unlike James Longacre, who designed the Indian Head Cent, Fraser used real Native Americans as a model for the figures on his coin. In fact, he used three. Fraser used three chiefs as models, then combined their features to form a sort of composite chief. The buffalo on the reverse side was drawn from a live model, as well, namely a bison called Black Diamond, who lived in the New York Zoological Gardens. On the obverse side of buffalo nickel coin is the profile of the composite chief. Facing right, towards
|
|
|
FIDIA K-414 5-AXIS HIGH SPEED MACHINING CENTER
1) USED FIDIA K-414 5-AXIS HIGH SPEED MACHINING CENTER NEW 2008 SPECIFICATIONS: WORK TABLE: 197" X 59" X-AXIS: 165" Y-AXIS: 43" Z-AXIS: 55" SPINDLE MOTOR: 72 HP SPINDLE SPEED: 24.000 RPM SPINDLE TAPER: HSK63A BI-ROTARY HEAD T-SLOTS: 10" TOOLS: 42 ATC MAX LOAD: 70.547 LBS X.Y,Z, LINEAR SPEED: 1181 IPM X.Y,Z, ACCURACY: ±0003" ±.0002" ±.00015" EQUIPPED WITH: FIDIA C-20 CONTROL L ASER TOOL MEASURING DEVICE HPX-21 PORTABLE PB PANEL OPERATING VOLUME COVER WORKING AREA MIST COLLECTOR M&H PROBE HMS SOFTWARE LICENSE-ANNUAL HAIMER TOOL SETTER& TOOLING CTS For more information on this machine please call Gary@ 888-998-4440
|
|
|
Roland DWX-50 5-Axis Auto Tool Changer Dental Mill Milling Machine, Only 436 Hrs
| Roland DWX-50 5-Axis Auto Tool Changer Dental Mill Milling Machine. Only 436 Hrs, Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album You are bidding on a Roland DWX-50 5-Axis Dental Milling Machine. This milling machine is in good working condition and has only 436 hours of total use. It is in good shape cosmetically. But has a couple of minor blemishes worth noting. There are some light scratches/scuffs on the exterior casing from normal use. The grey ... moreplastic panel on the left side of the unit's casing has some gouge marks in it and the metal(side wall) panel underneath it has a small dent in it. There is also a white stress mark located on the clear plastic front cover just to the right of the area where the side panel is damaged. These blemishes are merely cosmetic and do not effect this machine's performance in any way. This machine comes exactly as shown and includes power cord. One cap, USB cable and original box only. I looked through the manual,which can be downloaded for free online, to see what original parts are not included(Setup& Maintenance Guide, pg.2) The pieces not included are: hexagonal screwdriver. Tool positioner, detection pin, tool holder, mounting screws, one cap, clamp"A" for block workpiece, clamp"B" for block workplace, regulator, Roland software package CD-ROM, manual, and dust tray. I am unclear on which cap(S or L) is included, so I included a photo. Drivers, firmware and manuals can all be downloaded for free at Roland's website. PAYMENT: Bank Wire Only. SHIPPING: Buyer pays for freight shipping of this item. Buyer must arrange their own freight shipment. This i
|
|
|
Axis PS-L Art# 21625 5.1 VDC .5A 2.55W for axis 205, 206, 207 security cameras
Power supply is used but is genuine and in good working order as shown.
|
|
|
FANUC A06B-6096-H208 CNC AC SERVO AMPLIFIER, DUAL AXIS, 9.5 KW, 230 VAC
Inventory Number: 12091784732 Manufacturer: Description: FANUC A06B-6096-H208 CNC AC SERVO AMPLIFIER. DUAL AXIS, 9.5 KW, 230 VAC Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, GOOD CONDITION, 9.5 KW, SVM2-80/80 FSSB, 230 VAC, LAXIS/MAXIS: 18.7 AMP, REMOVED FROM A MACHINE BEING SCRAPPED, WIRES CUT FROM REMOVAL. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or ... moreemail.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 3
|
|
|
MINT Sage Z-axis 590-4 fly rod 9 foot 5 wt 4 piece
Trade up rods from Angler's Sage Z-axis Fly Rod You are bidding on a custom built Sage Z-axis fly rod. The rod is a 9 foot 5 weight. Model 590-4. Fly rod was owned by one of our customers who wanted a new Orvis. We built this rod in our shop three years ago. We will honor any warranty claims. We have built over 16.000 so we know what we are doing. Reel seat is nickle silver with coco bolo insert, sic stripper with hard chrome snakes.The rod is in good condition from tip top to butt cap. The blank has no marks and the cork is nice as well. Reel seat looks good with minor marks on the butt cap. Rod comes with carbon fiber rod tube and sock. The tube looks excellent as well. The rod is ready for a new home. Considered by many to be one of the best fly rods that Sage has ever made. RACK Remember: All of our trade in items have a 30 day inspection ... moreperiod. If you are not totally satisfied you will receive a no questions asked refund. Trade ins: Your wife has just told you no more rods. No more reels. It is just to expensive to replace her so get creative. Tell your bride what if I trade in some of my rods to Angler's Habitat for some new gear. She smiles and mentions how smart you are. You give me a call, we offer you a fair price for your"trade up" items and send your new equipment promptly. The end result, wife is happy and impressed at the same time which makes for a happy fly fisher! 208-454-8188 Have a rod or reel you no longer want or use? Why not think about trading it in for a new one? Tell us the details. And we'll offer you store credit for whatever we carry! Give us a call at 208-454-8188. When you purchase any of our rods we will give you full purchase value for a new rod in the future. For example. You fish a rod you buy from us for three years, and then Sage comes out with a new line of rods, and you just have to have it. Wife said no. But we will take it in on trade for a new rod and you all you have to do is pay shipping. Now wife is happy, and so are you! We want to earn your busi
|
|
|
SNK Ikegai NB110T 5 Axis Machining Centers
1. Has Rigid Tap. Memory upgraded to 2090KB(2 MB) Spindle· Dia. of boring spindle 4.33" 110mm) Spindle nose taper CAT#50· Dia. of milling spindle 8" 200mm) Spindle bearing diameter 9.44" x 6.29" Front) 8.85" x 5.90" Rear) Spindle Speeds 5– 3.000 RPM(2 ranges) Spindle Motor AC30/25 HP(30 min.cont. Max. Torque 1. 587 FT. LBS. 2. Travel Distance· X-axis(Table longitudinal) 78.74" Y-axis(Spindle vertical) 62.99" Z-axis(Table cross) 57.08" W-axis(Spindle axial) 25.29" 3. Table Built-in rotary table· Table type& size 55.11 x 62.99" Max. load 14.300 LBS. 4-way guide bed load capacity 22.046 LBS. Table B-axis 0.001 deg. Table index degree(with positioning pin) 90° x 4 4. Feed Rates· Rapid traverse(X. Y and Z) 472 IPM. 236 IPM(W) Cutting speed.039– 196 IPM· ... moreRotary table 1.25 RPM. 5. Automatic Tool Changer· Number of tools 40 tools/random selection· Max. tool diameter 5.5" 9.84" without adjacent tool) Max. tool length 15.74" Max. single tool weight 55 LBS. 6. Positioning Accuracy· X. Y& Z-axis, full stroke ±.00019" W-axis ±.00039" B-axis(CNC axis) ± 5 sec. B-axis(90° x 4) ± 5 sec. 7. Repeatability Accuracy· X. Y, Z& W-axis ±.00011" W-axis ±.00019" B-axis(CNC axis) ± 3 sec. B-axis(90° x 4) ± 3 sec. 8. Machine Dimensions· Overall height 162.99" Height between floor& table top 45.27" Floor space 188.97" x 231.10" 9. Machine Net Weight 64.900 lbs. Installed New 17MAR04 Dis-assembly. Freight transportation, and re-installation solely at buyers' expense. Product is sold"as-is. with no warranty transferred, expressed, nor implied. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Kids AXIS AX 2.3 Ski Boots Mondo 23.5 or US 5.5
Great kid ski boots. Mondo size 23.5, US 5.5 No tears, the boots are in good condition and function well. Theses are a pair of Axis ax 2.3 ski boots. Base is 268mm 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1446cb2de6c-0x10c-
|
|
|
CINCINNATI MILACRON ACRAMATIC 5-AXIS SERVO BOARD 3-542-1276A 35421276A
CINCINNATI MILACRON ACRAMATIC 5-AXIS SERVO BOARD 3-542-1276A Condition: EXCELLENT Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
RARE ORIGINAL AXIS POWERS 17.5" WWII MAUSER BAYONET CSZ A RARE SHEATH
UP FOR AUCTION IS A USED GERMAN/CZECH MAUSER BAYONET& SCABBARD MARKED CSZ A ON THE BLADE AT THE TOP OF IT ON THE BUTT OF THE HAND LE IT IS NOT MARKED THE METAL SHEATH IS THE MORE RARE KNOB STYLE STAYS FOR AFFIXING TO THE FROG. IT IS MARKED F 17904 THE SPRING BUTTON TO SECURE TO MAUSER IS FREE AND OPERATES CORRECTLY. GREAT PIECE FOR ANY WWII COLLECTION.
|
|
|
NEWPORT NEW FOCUS STAGE MOD 9081 Wide 5-Axis Aligner.
In GOOD WORKING condition.
|
|
|
LINE TOOL CO A-RH XYZ RIGHT HAND 3-AXIS LINEAR TRANSLATION STAGE .5 INCH TRAVEL
LINE TOOL CO A-RH XYZ RIGHT HAND 3-AXIS LINEAR TRANSLATION STAGE.5 INCH TRAVEL This auction is for one Line Tool A-RH. The A-RH model will produce movements in the X-Y-Z planes. Each slide has 1/2 inch travel. Dimensions of the mounting slide are 1-3/4 inches wide by 1-5/8 inches high. The mounting slide has four#6-32 tapped holes. There are four drilled and counterbored holes in the base. The castings are of dense iron. Nickel plated and finished with light gray enamel. The vertical slide will carry 1 pound. The Line Tool Company Model A-RH 3-Axis Linear Translation Stage is identical to the A-LH with the difference that the micrometer for the Y axis is on the opposite side. Very high quality ball-bearing linear translation stage. Total travel is 0.50 inches in each axis. The micrometer actuators are included. Mounting Slide Dimensions: ... more1-5/8" H x 1-3/4" Weigh is 3.5lbs. Buyer to pay shipping. Check out my other auctions for more XYZ Stages
|
|
|
Yaskawa Motoman USASEM-13YR11 MRC Robot YRFL-NNA60SB Axis 4, 5 or 6 Servo Motors
Yaskawa Motoman MRC Robot Motor Part#USASEM-13YR11 This part is in perfect condition. Tested and guaranteed to work. Used for Yaskawa Motoman MRC Robot Controllers. Please contact if you have further questions. Will Ship Internationally. Please contact for prefered method and exact cost. sales@factorysurplusdirect.com Thanks for shopping Factory Surplus Direct! Powered by ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1447ff572f5-0xfb-
|
|
|
Croatia Germany Nazi Axis 1943 Hrvatska Red Cross 10+5 stamp WW2 Era
Croatia Germany Nazi Axis 1943 Hrvatska Red Cross 10+5 stamp MLH WW2 Era Own a few pieces of History. Judge for yourself Please wait for invoice for combine shipping MNH Mint not Hinged MH Mint Hinged may have hinge or part hinge attached. MLH Mint Light Hinged MNG Mint No Gumm on stamp. Used Used stamps. Described to the best of my ability. Feel free to email with any question. Thanks for looking. Happy bidding and good luck. Please read. We do combine shipping. Highest Shipping Price for First item then.50 cent each additional Coin& stamp lot Single Stamp. Stamp lot or Note. Pay no more than $1.99 in shipping cost In US& Canada and $2.99 in shipping cost Europe& South America. On Same Invoice. Unless otherwise Stated in description. Items are shipped one to Five business days after payment is made or received. Not responsible ... morefor postal delays or lost mail. PayPal only Payment due within 7 days after auction has ended. All sales final. Please contact before leaving negative or neutral Feedback. It can be worked out. Serious bidders only.Thank you.
|
|
|
Axis 216FD IP Network PoE 802.3af Surveillance Security Camera 5.1V DC No AC
Search our eBay Store! Axis 216FD IP Network PoE 802.3af Surveillance Security Camera 5.1V DC No AC SKU: JV-NIK-B-AXISS216FDNOAC Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 Axis 216FD IP Network PoE 802.3af Surveillance Security Camera 5.1V DC No AC Adapter Model: 216FD Camera Model: Yv3.6x2.8A-SAXY Dimensions(L" x W" x H" 3 1/2 x 4 1/2 x 3 1/2· Unit powers on· Network and status lights glow green As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item ... moreis rated as an 8. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by t
|
|
|
NEAT X-Y Axis Motorized Linear Actuator Positioning Table 6"X6"X3.5"
NEAT X-Y Axis Motorized Linear Actuator Positioning Table 6"X6"X3.5" NEAT X-Y Axis Motorized Linear Actuator Positioning Table 6"X6"X3.5" Details: Manufacturer: NEAT Model: X-Y Axis Motorized Linear Actuator Positioning Table 6"X6"X3.5" Condition: Good cosmetic condition with some minor signs of previous use. Please refer to the photos for more details. Tested: Unit was removed from a working environment. I was able to adjust the motor by hand with the manual adjustment knob. No further testing. Warranty: 14-Day Right-of-Return SKU: 394781 Please review our Help page for all of our Terms and Conditions before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items ... moreare included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to purchase the item. If payment is not received within 3 days. The item(s) will be relisted at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 8.75% Sales tax applies to CALIFORNIA residents unless a resale tax form is provided for our records. We cannot process the order until we receive sales tax or a copy of your CA. If you would like to pay using a credit card. Please call us at(408) 743-5609. Resellers Click Here* WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be accepted for this item. 14-Day Right-of-Return: You have fourteen(14) days to contact us for a
|
|
|
FENNER SD6-1525-10-5 SERVO DYNAMICS 6-AXIS SERVO CHASSIS
Inventory Number: 01140750082 Manufacturer: Description: FENNER SD6-1525-10-5 SERVO DYNAMICS 6-AXIS SERVO CHASSIS Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, REMOVED FROM A MACHINE BEING SCRAPPED, WIRES CUT FROM REMOVAL. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of ... moreinvoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do n
|
|
|
DAVI-YSTAD 10 GA. X 10' MODEL KMD 5-AXIS CNC FOLDING AND BENDING ship worldwide
DAVI-YSTAD 10 GA. X 10' MODEL KMD 5-AXIS UNIV. FOLDING AND BENDING MACHINE. DOUBLE BENDER W/CNC INTERFACED BACK GAUGE General Specifications Max. work length 10'4" Sheet thickness 10 Gauge Clamping beam stroke 16" Daylight of clamping beam open(without tool) 24" Shut height with tools mounted 0 Max. clamping beam force 35 Tons Max. speed of clamping beam up 180"Min. Max. speed of clamping beam down 180"Min. Angle adjustment for upper and lower beam 0-135 deg. Speed of folding beam complete cycle from 0-90 deg. bend lower4 Sec. Speed of folding beam complete cycle from 0-90 deg. bend upper4.5 Sec. Up/Down adjustment of bending beam(lower) 4" Up/Down adjustment of bending beam(upper) 16" Weight of machine without back gauge 21.600 LBS Motor Specifications Not Available Equipped With Heavy welded all ... moresteel construction Bending beams as standard provided with crowning attachment. Adjustable from front of machine to guarantee a perfect straight bend irrespective of sheet thickness. Optimal profile of the clamping beam- 45 deg- Two sided hydraulic folding beams drive. Servo driven. Two sided clamping beam drive thru proportional valves Variable folding beam speed adjustment by CNC Controller Two-sided path measured system for synchronization. Allowing for parallelism control between clamping and bottom beam, regardless of where load is placed. No shimming required for off-center loads Overload protection. Free passage cut-outs on both sides of clamping beam. YSTAD Machines use VICKETS Pumps. VICKERS Servo and Proportional Valves, TELEMECANIQUE Electrics: On machine equipped as above. All axes are reset automatically when sheet thickness is input. Extensions of pendant control to 79" for operation from the rear of the machine. 2 Stock 1 2 3 SERIAL NUMBER 4 NEW 5 EQUPPED WITH: CONT. 1-Axis back gauge U-shaped with Pneumatic flip-up stops. The arms will all be provided with CNC interfaced flip up stops and it will give you a total range of gauging from 1" to 10 ft. The
|
|
|
MAZAK VARIAXIS 630-5X II 5-AXIS PRECISION VERTICAL MACHINING CENTER NEW 2007
MAZAK VARIAXIS 630-5X II 5-AXIS PRECISION VERTICAL MACHINING CENTER General Specifications X Axis stroke(spindle head left/right) 630 mm Y Axis stroke(table back/forth) 765 mm Z Axis stroke(spindle head up/down) 510 mm A Axis travel(table tilt) 120 deg. to +30 deg. C Axis travel(table rotation) 360 degree Distance from spindle nose to table top face) 230-740mm(table horizontal) Max. spindle speed 12.000 RPM Spindle taper MAS Bt.40 Spindle bearing dia. 80mm Spindle acceleration 1.7 sec(0-12.000RPM) Rapid traverse rate(X/Z/Y) 50 m/min Cutting feedrate 1-50 m/min Tool shank configuration#40 Tool magazine capacity 30 Tools Max. tool dia Dia. 80mm Max. tool length from gauge line 300 mm Max. tool weight 8 Kg Max. tool dia. w/adjacent pockets empty Dia 125mm Tool selection method Random selection. Shortest path Tool change time(chip-to-chip) 3.6 ... moreSec. Spindle motor AC 22kw(30 HP) Coolant pump motor(flood coolant) 180w Electrical power supply 46.7 kva Air supply pressure 200 i/min Machine Weight 13.500 kg Motor Specifications Not Available Equipped With Complete coolant system. Work Light One set of manuals. Active vibration control Intelligent thermal shield. Intelligent safety shield Mazak voice adviser. Virtual machining(1) Set of adjusting tools. Foundation kit(dry-pit, plates,anchor bolts& plates) Safety measures on worldwide level. Y-Axis Travel 30.12" 765mm) 2 Stock 12 3 SERIAL NUMBER 4 NEW 5 EQUIPPED WITH: CONT. Mazatrol Matrix control. 15"Color LCD, Power transformer for the other markets Main spindle motor AC 22kw(30HP) 15 min. Spindle speed 12,000 RPM(40) 30 Tool magazine. Spindle chiller unit, Coolers for ball screw(X,Y,Z-Axis) Operator door interlock with lock-switch. User macro(Common variables;600 pairs) Mazak Tapping/Boring Tornado(EIA/ISO) EIA/ISO Code input function(stand) F)EIA/ISO Function Silmultaneous 5 Axes. Add. EIA/ISO Functions(REQ.EIA/ISO) Inverse Time Feed. G37.Automatic tool-length measurement Sequence number comparison stop function. B)Mazacc-2D Software(Shap
|
|
|
5" 2-Axis Swiveling Angle Vise
Order No 05AV237, Mfg STI, Model No NA, Type Two-way Angle, Jaw Width 5" Jaw Depth 1.75" Jaw Opening 4" Details 360° Swivel base; With graduations and locks; 60° Tilt from horizontal to vertical; With handle; With one jaw; With mounting slots. Condition Used, Price $175.00, If you have any questions regarding this angle vise. Please don't hesitate to email us with questions. Most emails will be responded to within 24 business hours. Include the Stock number with your email. Here at Small Tools Inc. Our highly skilled staff fully runs and tests the machines for sale to ensure you get a quality product. If you are able to. Stop in to our warehouse. We can put you in the driver's seat and have you operate all of the machine's features before you buy. We pride ourselves on being an honest American-owned company. ... moreShipping is of the responsibility of the buyer. But a free quote can be given. Contact us for more information on shipping or arrangements. Please let us know if you are shipping to a business or residential address. This angle vise is subject to prior sale in our brick-and-mortar building unless otherwise noted. Thank you for looking! Very Truly Yours, Small Tools Inc. 1(800) 821-2674
|
|
 |