|
iscar 3/4" square threading & grooving tool .with 4 inserts.
5" long. 2 threaders& 2 groovers@ 046 wide. will combine shipping.
|
|
|
INDEXABLE BUTTON / FACE MILL W/ 3/4" SHANK & 2 INSERTS - 3-3/4" DIA.
aims INDEXABLE BUTTON/ FACE MILL W/ 3/4" SHANK& 2 INSERTS- 3-3/4" DIA. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. This is an Indexable Button/ Face Mill in good condition. Specifications: Indexable Stations: 1. Cutting Diameter: 3-3/4" Shank: 3/4" Projection: 1-1/4" Overall Length: 3-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a ... morelarge selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. INDEXABLE BUTTON/ FACE MILL W/ 3/4" SHANK& 2 INSERTS- 3-3/4" DIA. INDEXABLE BUTTON/ FACE MILL W/ 3/4" SHANK& 2 INSERTS- 3-3/4" DIA. Reliable Tool Inc. c 2011 | Powered by
|
|
|
VALENITE INDEXABLE ROUGING END MILL 1-3/4" DIA 3/4" SHANK + 10 CARBIDE INSERTS
Valenite Indexable Rouging End Mill 1-3/4" Dia x 3/4" Shank Model MRN $$ 134-5R3 0750 Includes 10 Unused Valenite Carbide Inserts Stock RNMC-5.24SS VIN Good Condition. Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
PAIR OF VALENITE 3" DIA. INDEXABLE FACE MILLS FLAT & BEVEL + INSERTS 1-1/4" BORE
Pair of Valenite 3" Diameter Indexable Face Mills Bevel Edge& Flat Bottom Type Include 3 unused carbide inserts for each style cutter. 1-1/4" Bore Good Condition. Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
UNUSED VALENITE 3/4" SHANK INDEXABLE TOOL BIT HOLDER + CARBIDE INSERTS
Unused Valenite Indexable Turnin& Facing Tool Holder 3/4" Shank x 6" Model SVWK 4C Made in the USA Includes 3 unused carbide inserts Good Condition. Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
VALENITE 1" DIA INDEXABLE END MILL CENTRE DEX 3/4" SHANK + CARBIDE INSERTS
Valenite Indexable End Mill 1" Dia x 3/4" Shank Model 1T6 CENTRE-DEX Includes 3 Unused Carbide Inserts Good Condition. Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
DORIAN TOOL CUT-OFF/GROOVING BLADE HOLDER w/ 3/4" SHANK + BLADE & INSERTS
aims DORIAN TOOL CUT-OFF/GROOVING BLADE HOLDER w/ 3/4" SHANK + BLADE& INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Dorian Tool. This is a Cut-Off/ Grooving Blade Holder in good condition. Model#s: VTBU-12-32(holder) GIH26-3(Blade) Specifications: Square Shank: 1/2" x 3/4" Modified. Overall Length: 3-1/2" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DORIAN TOOL CUT-OFF/GROOVING BLADE HOLDER w/ 3/4" SHANK + BLADE& INSERTS DORIAN TOOL CUT-OFF/GROOVING BLADE HOLDER w/ 3/4" ... moreSHANK + BLADE& INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
VALENITE CUT-OFF/GROOVING BLADE HOLDER w/ 3/4" SHANK + BLADE & INSERTS
aims VALENITE CUT-OFF/GROOVING BLADE HOLDER w/ 3/4" SHANK + BLADE& INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Valenite& Iscar. This is a Cut-Off/ Grooving Blade Holder in good condition. Model#s: VTBU-12-32(holder) SGFGH 150R-5(Blade) Specifications: Square Shank: 3/4" Overall Length: 4" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. VALENITE CUT-OFF/GROOVING BLADE HOLDER w/ 3/4" SHANK + BLADE& INSERTS VALENITE CUT-OFF/GROOVING BLADE HOLDER w/ 3/4" SHANK + BLADE& ... moreINSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
VALENITE LOC-A-DEX INDEXABLE FACE MILL + 7 INSERTS 3" DIAMETER 1-1/4" BORE
Valenite LOC-A-DEX Indexable Face Mill Includes 7 Unused Valenite Inserts Model CNMG-543E GH Model: MCN75-278-5R3-125F Overall Diameter: 3" 1-1/4" Bore Good Condition Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
VALENITE 12T3 LOC-A-DEX INDEXABLE FACE MILL + INSERTS 3" DIAMETER 1-1/4" BORE
Valenite 12T3 LOC-A-DEX Indexable Face Mill Includes 2 Unused Valenite Inserts Model SNMG543 Model: MSN75-278-5R3-125F Overall Diameter: 3" 1-1/4" Bore Good Condition Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13f61195f91-0xe7-
|
|
|
PAIR OF VALENITE SQUARE & BEVEL EDGE INDEXABLE END MILLS + INSERTS 3/4" SHANK
Pair of Valenite Square& Bevel Edge Indexable End Mills Includes 7 Unused Valenite Inserts Model SNEA322 Shank Size: 3/4" 1-1/2" Diameter Good Condition Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
INDEXABLE ROUND NOSE TURNING / FACING TOOLHOLDER 3/4" SHANK + 17 INSERTS
Indexable Round Nose Tool Holder f or Turning/Facing Model No. RAR 12 INSERT RNG 32 Square Shank: 3/4" Overall Length: 4-1/2" Includes 17 Unused Valenite Inserts Model VIN 5DJ4 RNEA 32 Good Condition. Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13fae2f663f-0x103-
|
|
|
KENNAMETAL INDEXABLE TOOL HOLDER w/ 3/4" SHANK + INSERTS
aims KENNAMETAL INDEXABLE TOOL HOLDER w/ 3/4" SHANK + INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in U.S.A by Kennametal. This is an Indexable Tool Holder& Inserts in good condition. Model# NRR-123B Specifications: Shank: 3/4" Square Overall Length: 4-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KENNAMETAL INDEXABLE TOOL HOLDER w/ 3/4" SHANK + INSERTS Reliable Tool Inc. c 2011 | Powered by 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13fcdbebc45-0x102-
|
|
|
LOT OF ASSORTED CARBIDE TIPPED MICROBORE INSERTS - 3/4"-20
aims LOT OF ASSORTED CARBIDE TIPPED MICROBORE INSERTS- 3/4"20 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Lot of Assorted of Carbide Tipped Microbore Inserts in good condition. Features: Carbide Cutting Tips. Specifications: Size: 3/4"20. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF ASSORTED CARBIDE TIPPED MICROBORE INSERTS- 3/4"20 Reliable Tool Inc. c 2011 | Powered by
|
|
|
Lovejoy 3.0" Indexable Insert Shell Mill 3JXAR4-1-4 with Inserts
Lovejoy 3.0" Indexable Insert Shell Mill 3JXAR4-1-4 4 Flute with 8 New SEC 422 Inserts 1.0" Arbor Hole Excellent Condition Check out my other items! KN-04
|
|
|
Carboloy 3/4" (0.75") Square Indexable Toolholder with 2 Inserts
Clearing Out Surplus Tooling! Up for auction is this indexable tool holder for lathe work/ turning. Specs are as follows: Manufacturer part number: TWL-12-3 Holder size: 3/4" x 3/4" square Overall length: approximately 6" Included inserts: 2 total Insert type: triangular Insert size: approximately 0.58" per side(Box is labeled TNMG-322E-48 This is a high quality name brand toolholder. Ready to use on your lathe. Please see my other auctions for more toolholders in 3/4" and 1" square size. Bid with confidence and save BIG, my 100% positive feedback speaks for itself! Additional information: Payment is due within 3 business days of close of auction; Paypal only. Please. Item will ship within 3 business days of receipt of payment. There is no return policy; all items are sold as-is, as shown in the pictures. Lot# ... moreTH006
|
|
|
SANDVIK INDEXABLE TURNING / FACING TOOL HOLDER W/ INSERTS - 3/4" X 5/8"
aims SANDVIK INDEXABLE TURNING/ FACING TOOL HOLDER W/ INSERTS- 3/4" X 5/8" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Sandvik. This is a Indexable Turning/ Facing Tool Holder with 5 Inserts in good condition. Model# R166F-12-310B Specifications: Square Shank: 3/4" x 3/4" Overall Length: 5" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SANDVIK INDEXABLE TURNING/ FACING TOOL HOLDER W/ INSERTS- 3/4" X 5/8" Reliable Tool Inc. c 2011 | Powered by
|
|
|
INDEXABLE TOOL HOLDER WITH 1/2" x 3/4" SHANK + INSERTS
aims INDEXABLE TOOL HOLDER WITH 1/2" x 3/4" SHANK + INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is an Indexable Tool Holder in GOOD condition. Specifications: Square Shank: 1/2" x 3/4" Overall Length: 4-1/2" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. INDEXABLE TOOL HOLDER WITH 1/2" x 3/4" SHANK + INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
2 Valenite Carbide Indexable Toolholders w/ 3/4 x 3/4 Shanks & 30 Inserts
2 Valenite Carbide Indexable Toolholders. 1 LH& 1 RH neg rake w/ shank 3/4 x 3/4& 20 Triangular carbide Inserts& 10 ceramic inserts 1/2 IC, 7/8 side, straight side for neg rake w/ proper shim base for insert, clamp pad& screw. OA exc cond, replacement cost about $240. I accept bids ONLY FROM U.S.A. 50 states. If you have a NON-U.S. Paypal account& a U.S. address, I WILL NOT ACCEPT YOUR BID& your Paypal payment will be blocked. PA residents of(Allegheny County) Phila County must add(7% 8% sales tax. All other counties in PA must add 6% sales tax. Buyer pays 9.75 for packing, handling, shipping for U.S. 50 state delivery. APO, FPO& others higher. I ship every Wed weather permitting. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-14084ad5b15-0x101-
|
|
|
2.5" Insert Mill 3/4" Shank with New Inserts
2.5" Insert Mill 3/4" Shank with New Inserts 3/4" Shank 6 New Inserts SPG 422 Excellent Condition Check out my other items! Questions? Call Robert at 607-259-5615 NU1-D8-R6
|
|
|
2.0" Insert Mill 3/4" Shank with New Inserts
2.0" Insert Mill 3/4" Shank with New Inserts 3/4" Shank 6 New Inserts CDE 322 R004 Excellent Condition Check out my other items! Questions? Call Robert at 607-259-5615 NU1-D8-R6
|
|
|
Kennametal 3/4" Diameter Indexable Insert Bore Bar and Inserts
Kennametal 3/4" Diameter Indexable Insert Bore Bar and Inserts B-1606 9.625" OAL 3/4" Shank Aprox.875 Minimum Bore Used in very good condition 10 New TNMG Carbide Inserts I will combine shipping NU1-D4-R8 Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback
|
|
|
3/4 Dia. Fette Carbide BACKDRAFT Inserts Indexable Cutter LC609T BDR Cutter tool
Here we have 1 Good Fairly sharp used Flat Bottom center cutting insert. Looks like it may have been used one time but I do not see any chips and if there are any they are very small. It should still work fine. 3/4" Diameter The thickness is 3mm Center hole is 5mm Diameter Overall Length is 18.05mm I am not sure what size the radius is on the corners or who makes them but probably Fette. Dapra or maybe Depo Best? Most likely it is a Grade LC609T Milling tools I do not have the original packaging. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them ... morein the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! Pay me securely with any major credit card through PayPal! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Ra
|
|
|
3/4" DIAMETER INDEXABLE END MILL W/ 6 KENNAMETAL INSERTS TPGN 160316
Indexable End Mill w/ 6 Kennametal Inserts Manufactured in Poland Model 6-901-015 3/4" Diameter Shank x 3-1/4" Overall Length Includes 6 Kennametal Solid Carbide Indexable Inserts Model TPGN 160316 KC950 Good Condition! No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! ... moreTo receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
CARBOLOY CTG INDEXABLE TOOL HOLDERS 3/4" SHANK W/ INSERTS
CARBOLOY CTG INDEXABLE TOOL HOLDERS 3/4" SHANK W/ INSERTS Shank: 3/4" OAL: 4 3/4" Model No. CTG* Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14422213952-0xff-
|
|
|
3/4" BORING BAR & CARBIDE INSERTS LATHE MILL TOOL BITS MACHINIST TOOLMAKER
3/4" x 4 15/16" LG. BORING BAR 5/8" SHANK FITS BRIDGEPORT BORING HEADS& LATHE HOLDERS. IN GREAT SHAPE, COMES WITH 4 LIGHTLY USED INSERTS USED ON ALUM. MOST TIPS STILL IN GOOD USEABLE SHAPE, INSERT IN BAR HAS ONE NEW SIDE. PLEASE CHECK MY OTHER ADS FOR MORE TOOLING. THANKS. SALES& SHIPPING TO USA ONLY. PAYMENT DO IN FIRST 24 HRS. AFTER SALES END AND I WILL SHIP BY NEXT DAY. THANKS. NOTE: USE SHOPPING CART FOR MORE THAN ONE ITEM PURCHASE FOR COMBINED SHIPPING COST. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14467a840ee-0x105-
|
|
|
Kennametal Carbide Inserts Holder 3/4" Lathe Tools Bits Machinist Gunsmith Lot
Ebay Base This auction is for a Kennametal carbide insert holder in 3/4" shank. This premium quality right-hand holder is Model № NVLCR-123B. This is for parts or repair. it is missing hold down clamp and screws. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
|
|
|
INGERSOLL 3/4" INDEXIBLE END MILL , USES CDE INSERTS , 3/4" SHANK
UP FOR AUCTION IS A INGERSOLL 3/4" INDEXIBLE END MILL. 2 INSERT. USES CDE INSERTS 3/4" SHANK THIS IS IN GOOD CONDITION. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-144ec1c18d0-0x107-
|
|
|
KENNAMETAL KIPR-0.95-SD2.6-45 CUTTER 3/4" SHANK LIGHT USE WITH INSERTS
Awesome quality chamfer cutter. Also works great as a small face mill. Up to 10000 RPM. It also says ATKTO6 MS-1369. The inserts in it are lightly used on 2 of the 4 points. I will also include the torx wrench for the inserts. 3/4 inch shank. not a mark on it.
|
|
|
KENNAMETAL MODEL MCLNR-124B ND3 INDEXABLE TOOL HOLDER 3/4" SHANK W/ INSERTS
Kennametal Indexable Tool Holder Model MCLNR-124B ND3 3/4" Square Shank x 4-1/2" Overall Length Includes(2) Hertel Unused Solid Carbide Inserts Model CNMG 432R No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be ... moreinvoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
APT MODEL D-15C-60 INDEXABLE END MILL 3/4" SHANK W/ INSERTS SPG-424
APT Indexable End Mill w/ Inserts Model D-15C-60 3/4" Shank Includes(10) Solid Carbide Inserts Model SPG-424 VR-5 No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- ... moreyour item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
PAIR OF APT TRI-DEX INDEXABLE END MILLS 3/4" & 1" SHANKS W/ INSERTS TPG324
Pair of APT Indexable End Mills w/ Inserts Lot Includes: Model EM-087-34. 3/4" Shank Model EM-100-1. 1" Shank Includes(4) Kennametal Solid Carbide Inserts Model TPG324 No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined rate you must wait to be invoiced by us- do NOT pay eBay auction ... moreend notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
Carbaloy PTAPRS-12-3 3/4" Square Shank Turning Tool with 9 New Inserts
Carbaloy PTAPRS-12-3 3/4" Square Shank Turning Tool with 9 New Inserts with 9 New Carbaloy Inserts TPMM 321E-46 Good Condition Questions? Call Robert at 607-259-5615 NU1-D9-R4 Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-146a66244a4-0x114-
|
|
|
ISCAR INDEXABLE TWIST DRILL MODEL MR183-084WK-A4B99758 3/4" CUT 1" SHANK INSERTS
Iscar Precision Indexable Twist Drill Model MR183-084WK-A4B99758 3-1/2" Cut Length 1" Diameter Shank x 7-1/4" Overall Length Includes(4) Iscar Unused Carbide Inserts Model TPG 222 No Reserve! Check my other auctions for mor e quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping ... morerate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
new kennametal top notch 3/4" square grooving tool with 5 threading inserts.
uses#3 inserts. will combine shipping.
|
|
|
LIGHTLY USED KENNAMETAL MCLNR INDEXABLE TOOL HOLDER W/ 3/4" SHANK + INSERTS
LIGHTLY USED KENNAMETAL MCLNR INDEXABLE TOOL HOLDER W/ 3/4" SHANK + INSERTS Shank: 3/4" OAL: 4" Model: mclnr + 5 New Inserts* Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-147deb2f2fd-0x110-
|
|
|
KENNAMETAL SVJBL INDEXABLE TOOL HOLDER W/ 3/4" SHANK + INSERTS
KENNAMETAL SVJBL INDEXABLE TOOL HOLDER W/ 3/4" SHANK + INSERTS Shank: 3/4" OAL: 4" Model: Svjbl + 5 New Inserts* Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|
|
LIGHTLY USED KENNAMETAL NSL INDEXABLE TOOL HOLDER W/ 3/4" SHANK + INSERTS
LIGHTLY USED KENNAMETAL NSL INDEXABLE TOOL HOLDER W/ 3/4" SHANK + INSERTS Shank: 3/4" OAL: 4" Model: NSL + 5 New TOP NOTCH Inserts* Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|
|
LIGHTLY USED KENNAMETAL SDJCR INDEXABLE TOOL HOLDER W/ 3/4" SHANK + INSERTS
LIGHTLY USED KENNAMETAL INDEXABLE TOOL HOLDER W/ 3/4" SHANK + INSERTS Shank: 3/4" OAL: 4" Model: SDJCR + 5 New Inserts* Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|
|
KENNAMETAL NF1 SDJCL 123 INDEXABLE TOOL HOLDER W/ 3/4" SHANK + INSERTS
KENNAMETAL NF1 SDJCL 123 INDEXABLE TOOL HOLDER W/ 3/4" SHANK + INSERTS Shank: 3/4" OAL: 4" + 5 New Inserts* Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days* 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-147deb2f3e1-0x112-
|
|
|
1/2" x 4-3/8" LONG Kennametal Carbide Inserts Indexable Boring Bar A08-SCFPR2
Item. Boring bar tool holder Manufacturer. Kennametal Length. 4-3/8" Overall Condition. Good used. Needs a new insert We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you ... morebid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile Rd. NW Grand Rapids. MI 616-791-9395
|
|
|
3/4" Ball Nose Radius end mill cutter LMT FETTE Dapra Carbide Inserts 2 Pieces
Here we have 2 Inserts. Both look used but look to be in good shape yet I do not see a name or a grade so not sure who makes them Diameter 3/4" x 3mm Thick with a 5mm center hole Distance from the Flat edge to the tip measures 15.55mm This is not an actual photo but these are pretty much just like the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items ... morefrom my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile Rd. NW Grand Rapids. MI 616-791-9395
|
|
|
2JZ-2666 BG-17417 Inserts Holder 3/4" X 1 1/4" Shank
2JZ-2666 BG-17417 Inserts Holder 3/4" X 1 1/4" Shank
|
|
|
2" DIAMETER INDEXABLE SHELL FACE MILL W 3/4" BORE FOR CARBIDE INSERTS
2" Diameter Indexable Shell/ Face Mill 3/4" Bore Accepts Solid Carbide Inserts Mfgs Marks worn. But looks like a Seco or Ingersoll No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your ... moreitem will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
SANDVIK 1-1/2" 3-FLUTE INDEXABLE END MILL 3/4" SHANK + (3) INSERTS #R215.2-340
We Have 1.000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us@ 909.919.9600! GF Make: Sandvik Coromant Model# R215.2-340 Condition: GREAT! Specifications: Cutting Diameter: 1-1/2" Length of Cut: 1" Shank: 3/4" straight No. of Flutes: 3 Overall Length: 4" Comes as shown in pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive a 30% discount per item. This Only Applies To Tooling Items with a Total Gross Weight of Under 100 Lbs. Machines are Not Included in this Offer. This Will be Final on All Transactions Unless Prior Arrangements ... moreare Agreed Upon Before The End Of The Auction. Notice! After purchasing and collecting your item. We would appreciate your feedback. If you could please leave a 5 star rating in all four of the applicable categories, it would be greatly appreciated. If you have any problems or issues, please contact us prior to leaving any feedback. We strive to provide the best service we can, and understand that mistakes are made in some cases. In the case of these mistakes, we will do whatever is necessary to rectify the situation. Furthermore, because of issues with past customers, we mark all our items to prevent any dishonest eBayer from trying to exchange our item with their old/non-working item. This type of behavior is unacceptable, and action will be taken against these buyers through eBay's policies by reporting them to eBay immediately. Here at MachineStation, we realize most people are honest, and do not practice techniques mentioned above. By the same token we are committed to provide superior customer service to all. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay l
|
|
|
HEAVY DUTY HERTEL INDEXABLE COOLANT BORING BAR 1-3/4" X 14" + INSERTS A28-MCLNR4
Hertel Heavy Duty Boring Bar Model A28-MCLNR4 Coolant Thru Type Made in USA 1-3/4" Shank x 14" Long Includes 3 New SoliD Carbide Inserts Style CNMG-433 No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following ... moreauction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
KENNAMETAL TOP NOTCH INDEXABLE TOOL HOLDER NG9 NSL-123A 3/4" SHANK W/ INSERTS
Kennametal Indexable Threading& Grooving Tool Holder Model NG9 NSL-123A 3/4" Shank x 3-3/4" Long Includes 2 New Solid Carbide Inserts Style Top Notch No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following ... moreauction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
SECO INDEXABLE GROOVING TOOL HOLDER CFMR 075 04B 3/4" SHANK W/ INSERTS
Seco Indexable Threading& Grooving Tool Holder Model CFMR 075 04B 3/4" Shank x 4-1/2" Long Includes 2 New Solid Carbide Inserts Style MT CP500 No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following ... moreauction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
VALENITE INDEXABLE THREADING & GROOVING TOOL HOLDER 3/4" SHANK W/ 3 INSERTS
Valenite Indexable Threading& Grooving Tool Holder Model PTMR 12-32 3/4" Shank x 4-1/2" Long Includes 3 New Solid Carbide Inserts Style TNMC 32NV No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following ... moreauction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
CARBOLOY INDEXABLE TURNING & FACING TOOL HOLDER 3/4" SHANK W/ 5 CERAMIC INSERTS
Carboloy Indexable Turning& Facing Tool Holder Model MCLNR 12-4B 3/4" Shank x 4-1/2" Long Includes 5 New Ceramic Inserts Style CNGA 432 No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction ... moreend- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
DORIAN INDEXABLE TURNING & FACING TOOL HOLDER 3/4" SHANK W/ 9 CERAMIC INSERTS
Dorian Indexable Turning& Facing Tool Holder Model CTAPR 12-3B 3/4" Shank x 4-1/2" Long Includes 9 New Ceramic Inserts Style TPG-322 No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- ... moreyour item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
PAIR OF FABMET INDEXABLE TURNING & FACING TOOL HOLDERS 3/4" SHANK W/ 4 INSERTS
Pair of Fabmet Indexable Turning& Facing Tool Holders Model MWLNL 124B& MWLNR 124B 3/4" Shank x 4-1/2" Long Includes 4 New Carbide Inserts Style WNMG 432 No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately ... morefollowing auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
SECO USA SOLID CARBIDE COOLANT THRU BORING BAR 3/4" X 10" W/ INSERTS E12-SCLCR-3
Seco USA Solid Carbide Boring Bar Coolant Thru Model E12-SCLCR-3 3/4" Shank x 10" Long Includes 2 New Carbide Inserts Style CCGW 32.52 No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- ... moreyour item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14b408fbccb-0x103-
|
|
|
SECO INDEXABLE TURNING & FACING TOOL HOLDER 3/4" SHANK W/ 2 INSERTS SCLCR 12-3
Seco Indexable Turning& Facing Tool Holder Model SCLCR 12-3 3/4" Shank x 4-1/2" Long Includes 2 New Carbide Inserts Style CCGW 32.52 No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- ... moreyour item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
VALENITE INDEXABLE TURNING & FACING TOOL HOLDER RH 3/4" SHANK W/ 2 INSERTS
Valenite Indexable Turning& Facing Tool Holder Model MDJNR-12-4 B 3/4" Shank x 4-1/2" Long Includes 2 New Carbide Inserts Style DNMG 432 No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction ... moreend- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
Hertel Face Mill with Box of inserts, 3/4" Shank
Hertel Face Mill with Box inserts. 3/4" Shank
|
|
|
Hertel 2-1/2" Face Mill with Box of inserts, 3/4" Shank
Hertel 2-1/2" Face Mill with Box inserts. 3/4" Shank
|
|
|
INDEXABLE THREADING & GROOVING BAR W 3 SOLID CARBIDE INSERTS 3/4" SHANK X 4"
Indexable Threading& Grooving Bar Model SO612 LSER. 3/4" Shank x 4" Long Shortened from original length Includes 3 New Solid carbide Inserts Model 9BTG125R03 No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately ... morefollowing auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
KAISER 3/8" X 3&3/4" THINBIT INSERT HOLDER with 17 INSERTS
WOW! Straight from an Excellent Local MACHINE SHOP Estate comes this.3/8" X 3&3/4" KAISER THINBIT INSERT HOLDER with 17 VARIOUS INSERTS.Condition is normal wear.Display is Great.See Photos.Please see ALL of the MACHINE SHOP Items from this Estate on our ebay sell site Now.Winning bidder pays shipping.ESTATE#02-6657
|
|
|
NICE! 2" INDEXABLE FACE MILL 3/4" BORE + NEW SOLID CARBIDE INSERTS
2" Indexable Face Mill Looks Like Seco or Iscar 2" Cut Diameter X 1/2" Cut Length 3/4" Bore Includes 3 New Solid Carbide Inserts No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction ... moreend- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
PAIR OF INDEXABLE TOOLS END FACE MILL 3/4" SHANK + MELIN SOLID CARBIDE INSERTS
Pair of Indexable Tools W/ New Inserts 2-1/2" Indexable Face Mill Round Nose 1" Bore 2-1/2" Diameter X 3/4" Shank End Mill Round Nose Includes 16 New Melin Solid Carbide Inserts No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. ... moreI f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
GERMAN MADE 1-1/2" INDEXABLE END MILL 3/4" SHANK +3 NEW SOLID CARBIDE INSERTS
German Made Indexable End Mill 1-1/2" Cut Diameter X 1" Max Depth 3/4" Shank Includes 3 New Kennametal Solid Carbide Inserts K110M No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- ... moreyour item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
CARBOLOY 1-1/2" INDEXABLE FACING END MILL 1-1/4" SHANK +3 NEW CARBIDE INSERTS
Carboloy Indexable Facing End Mill Model R217.79-01.50-3-16 1-1/2" Cut Diameter X 2" Max Depth 1-1/4" Shank Includes 3 New Solid Carbide Inserts No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following ... moreauction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14bab6eb632-0x10f-
|
|
|
KENNAMETAL INDEXABLE TURNING TOOL HOLDER MWLNR 123B NB5 3/4" SHANK + INSERTS
Kennametal Indexable Turning Tool Holder Model MWLNR 123B NB5 3/4" x 4-1/2" Shank Includes 2 New Solid Carbide Inserts WNMG 323 KG990 No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- ... moreyour item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14bc042f132-0x102-
|
|
|
SANDVIK 2" DIA INDEXABLE CARBIDE INSERT GROOVE MILL 3/4" BORE + CARBIDE INSERTS
Sandik Indexable Grooving Face Mill Model A328-063Q19-13M 2" Diameter 3/4" Diameter Bore Includes 5 New Solid Carbide Inserts 328R13-315 02-GM 1025 No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following ... moreauction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
Valenite 7 Piece Set Mini Indexable End Mills Carbide Inserts 3/4" Shanks
Thank You For Looking At Our Products Product Information: Valenite 7 Piece Mini Indexable End Mill Set Made in USA Product Features& Specifications: 3/4" Straight Shanks Set Includes: Model P-VMSN-100R-88 7/8" Cut Diameter Model P-VMSN-100R-85 7/8" Cut Diameter Model P-VMSN-100R-45 1-1/8" Cut Diameter 45 degree Model P-VMRN-100R 1" Cut Diameter Round Inserts Model P-VMSN-100R-O5CB 1" Cut Diameter Model P-VMTN-100R- 1" Cut Diameter Includes Original Packaging& Wrenches Pictured Product Code: 15022513
|
|
|
SANDIK 2" INDEXABLE FACE MILL 3/4" BORE + NEW SOLID CARBIDE INSERTS
Sanvik 2" Indexable Face Mill 2" Cut Diameter X 1/2" Cut Length 3/4" Bore Includes 3 New Solid Carbide Inserts SPMX 12T3AP No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your ... moreitem will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
ISCAR 2" INDEXABLE FACE MILL 3/4" BORE + NEW SOLID CARBIDE INSERTS
Iscar 2" Indexable Face Mill HM90 F90AD2.00-3.75 2" Cut Diameter X 1/2" Cut Length 3/4" Bore Includes 3 New Solid Carbide Inserts HMX96544D No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following ... moreauction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
KENNAMETAL INDEXABLE BORING BAR 3/4" X 8" + 2 NEW SOLID CARBIDE INSERTS
Kennametal Indexable Boring Bar 3/4" Shank x 8" Long Model Unavailable. Shortened from Original Length Includes 2 New Solid Carbide Inserts No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction ... moreend- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
VARDEX INDEXABLE THREADING BAR 3/4" SHANK NVR-0375-2 + 2 NEW CARBIDE INSERTS
Vardex Indexable Threading Bar Model NVR-0375-2 3/4" Shank x 7" Long 7/16" Dia Tip Includes 2 New Solid Carbide Inserts No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item ... morewill be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14bfc8cd5aa-0x10a-
|
|
|
PAIR OF SECO MINI MASTER INDEXABLE END MILLS MM10 W/ INSERTS 5/8" & 3/4" SHANK
Pair of Seco Mini Master Indexable End Mills MM10 0.62-2.6-0 5/8" Shank MM10-0.75-3.0-3 3/4" Shank Includes Inserts Pictured No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item ... morewill be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
SECO MINI MASTER INDEXABLE END MILL MM12 W/ INSERTS 3/4" SHANK
Seco Mini Master Indexable End Mill MM12-0.75-3.1-3 3/4" Shank Includes Inserts Pictured No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our ... moreReturn Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|