|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$53.95 Shipping Condition: Brand New Location: Herne Hill, Australia SLEEVE FOR HAY SPIKES CONUS II. paulnathan ( 697. ) During past month.
Buy It Now
Condition: Brand New Location: Jamestown, Australia Catford Engineering Black Line High Tensile Heavy Section Hay Tine (Sleeve Not Included) Conus ll Type. Tine Length: 812mm / 32" long. Tine Penetration ... moreLength: 660mm / 26". Tine must be tightened in sleeve to a torque of 460 ft/lbs.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1250mm. High quality German made tine. 1 x Hay Spear/Tine Conus 2 type. CONUS 2 type with a M28 (28mm) nut included. LOCAL PICKUP IS AVAILABLE.
Buy It Now
Condition: Brand New Location: Brooklyn, Australia The FIBS1500HD Millers Falls Adjustable 675kg Hay Bale Spear is asolid, dependable bale spike which is designed to handle bothround and square bales with ... moreease. Featuring a cat 1 3 point linkage setup, the FIBS1500HD Millers Falls Adjustable 675kg Hay Bale Spear willconnect quickly and easily to most tractors 25HP and above.
Buy It Now
Condition: Brand New Location: Herne Hill, Australia AGPARTS HAY SPIKES CONUS II.
Buy It Now
Condition: Brand New Location: Brooklyn, Australia The FIBS1500E Millers Falls 675kg Hay Bale Spear is asolid, dependable bale spike which is designed to handle bothround and square bales with ease. Featuring ... morea cat 1 3 point linkage setup, the FIBS1500E Millers Falls 675kg Hay Bale Spear willconnect quickly and easily to most tractors 25HP and above.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia 2 x Hay Silage Bale Spike Tine Loader Spear Straight Conus 2 With M28 nut. 2 x Conus 2 Tine. Includes 1 x M28 Nut each tine. Tightening Torque for Nut: ... more460 ft lbs. LOCAL PICKUP IS AVAILABLE.
Buy It Now
Condition: Brand New Location: Jamestown, Australia Catford Engineering Black Line High Tensile Heavy Section Hay Tine (Includes Sleeve) Conus ll Type. Tine Length: 812mm / 32" long. Tine Penetration Length: ... more660mm / 26". Tine must be tightened in sleeve to a torque of 460 ft/lbs.
Buy It Now
Condition: Brand New Location: Brooklyn, Australia The Millers Falls FIBS2000CR 900kg Clamp On Bucket Bale Spear could be just the solution you've been looking for. Lift Capacity: 900kg. The sturdy 915mm ... more(36") x 50mm (2") main spear and two 340mm (13.5") x 28mm (1 1/4") stabilising spears are forged fromheat treated steel with a tapered design to allow the spears to easilypenetrate and withdraw from hard centre hay bales.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Hay Tine/ Fork. Loader Tine / Fork. 57mm x 120mm Conus 2. LOCAL PICKUP IS AVAILABLE. You will be notified if this should happen. Total length : 119.81mm. ... moreapproximate size .
Buy It Now
Condition: Brand New Location: Melbourne, Australia TRACTOR LOADER TINE - CONUS 2. Heavy Duty Bush 55mm x 120mm Conus 2. HEAVY DUTY - BUSH SLEEVE. If you require further assistance regarding this part.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1100mm. High quality German made tine. 1 x Hay Spear/Tine Conus 2 type. CONUS 2 type with a M28 (28mm) nut included. LOCAL PICKUP IS AVAILABLE.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 980mm (38 1/2"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at ... more500mm out from end of taper that goes into socket.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1100mm (43"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at 500mm ... moreout from end of taper that goes into socket. 1 x Hay Spear/Tine Conus 2 type.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1100mm. High quality German made tine. 2 x Hay Spear/Tine Conus 2 type. 2 x Conus 2 bush to suit. CONUS 2 type with a M28 (28mm) nut included. ... moreLOCAL PICKUP IS AVAILABLE. You will be notified if this should happen.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1250mm. High quality German made tine. 2 x Hay Spear/Tine Conus 2 type. 2 x Conus 2 bush to suit. CONUS 2 type with a M28 (28mm) nut included. ... moreLOCAL PICKUP IS AVAILABLE. You will be notified if this should happen.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1100mm (43"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at 500mm ... moreout from end of taper that goes into socket. 1 x Hay Spear/Tine Conus 1 type.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Hay Tine/ Fork. Loader Tine / Fork. Bush 50mm x 110mm Conus 1. LOCAL PICKUP IS AVAILABLE. You will be notified if this should happen. Total length : 110.08mm. ... moreapproximate size Alternate/ Original part numbers are for reference only.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Hay Tine/ Fork. Loader Tine / Fork. 80mm x 165mm Conus 3. LOCAL PICKUP IS AVAILABLE. You will be notified if this should happen. Total length : 165.93mm. ... moreapproximate size Alternate/ Original part numbers are for reference only.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1000mm (39"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at 500mm ... moreout from end of taper that goes into socket. 1 x Hay Spear/Tine Conus 1 type.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1100mm (43"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at 500mm ... moreout from end of taper that goes into socket. 2 x Hay Spear/Tine Conus 2 type.
Buy It Now
Condition: Brand New Location: Dandenong North, Australia BALE SPEAR 965mm – 317mm Part No.: FIBS1500E. Part No.: FIBS1500E. Main spear length 965mm, two short shears 317mm. Features tapered heat treated steel ... morespears designed for hard centre bales allowing easy penetration and withdrawal.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 810mm (32"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at 500mm ... moreout from end of taper that goes into socket. 1 x Hay Spear/Tine Conus 1 type.
Buy It Now
Condition: Brand New Location: Dandenong North, Australia Part No.: FIBS3300. Model: FIBS3300. 1500kg bale handling fork. This is a great 3 point linkage Bale Spear for use on tractors over 25hp. Type: Handling ... moreFork Bale Spear. Attach the fork to your tractor with the 3-point hitch and start working away.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1400mm (55"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at 500mm ... moreout from end of taper that goes into socket. 1 x Hay Spear/Tine Conus 3 type.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1400mm. High quality German made tine. 2 x Hay Spear/Tine Conus 3 type. 2 x Conus 3 bush to suit. CONUS 3 type with a M33 (33mm) nut included. ... moreLOCAL PICKUP IS AVAILABLE. You will be notified if this should happen.
Buy It Now
Condition: Brand New Location: Dandenong North, Australia BALE SPEAR 965mm – 317mm heavy duty Part No.: FIBS1500HD. Main spear length 965mm, two short shears 317mm. Features tapered heat treated steel spears ... moredesigned for hard centre bales allowing easy penetration and withdrawal.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1400mm. High quality German made tine. 1 x Hay Spear/Tine Conus 3 type. CONUS 3 type with a M33 (33mm) nut included\. LOCAL PICKUP IS AVAILABLE.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1240mm (43"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at 500mm ... moreout from end of taper that goes into socket. 2 x Hay Spear/Tine Conus 2 type.
Buy It Now
Condition: Brand New Location: Dandenong North, Australia Part No.: FIBS900. Hay Spike Part No. · Main hay spike 2” x 39” (900mm). · Lower stabilizing hay spikes 1-1/4” x 13-1/4 (336mm). · Spacing 25” (635mm) ... morecentre to centre. Bookings are essential. · Lifting capacity: 420kgs (round/square bales).
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Heavy Duty Silage Hay Spears. 2 x Hay Spear/Tines Conus 3 Type 1400mm(55") with Eccentric M33 x 2 Fixing Nuts+ 2 x Weld-In Mounting Sleeves Special Conus ... more1 Type - OD 50mm(1.968"). 2 x Hay Spear/Tines Conus 3 Type 1400mm(55") with Eccentric M33 x 2 Fixing Nuts.
Buy It Now
Condition: Brand New Location: Dandenong North, Australia Part No.: SBS965. This Bale Spear is fitted to the 3-point linkage and is great for transporting hay bales to the paddock. The Bale Spear is suitable ... morefor CAT 1 and CAT 2 Tractors 25HP to 50HP. N.B. Colour may vary.
Buy It Now
Condition: Brand New Location: Brooklyn, Australia The FIBS3300 Millers Falls 1500kg Hay Bale Handling Fork is asolid, dependable bale fork which is designed to handlelarge square hay bales with ease. ... moreFeaturing a cat 1 3 point linkage setup, the FIBS3300 Millers Falls 1500kg Hay Bale Handling Fork willconnect quickly and easily to most tractors 25HP and above.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at 500mm out from end of taper that ... moregoes into socket. Tine length : 14000mm (55").
Buy It Now
Condition: Brand New Location: Brooklyn, Australia The FIBS2200FA Millers Falls 1000kg Round Bale Adjustable Feed Out Fork is asolid, dependable bale fork which is designed to handle 110mm-160mmround bales ... morewith ease. Featuring a cat 1 3 point linkage setup, theFIBS2200FA Millers Falls 1000kg Round Bale Adjustable Feed Out Fork willconnect quickly and easily to most tractors 25HP and above.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Heavy Duty Silage Hay Spears. 2x Hay Spear/Tines Conus 1 Type 810mm(32") with M22 Fixing Nuts. 2x Hay Spear/Tines Conus 1 Type 1000mm(39")with M22 Fixing ... moreNuts. 2x Hay Spear/Tines Conus 1 Type 1100mm(43") with M22 Fixing Nuts.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tractor Silage Hay Spear Conus 2 Type 32" 38 1/2" 43" & 49" Straight Tines Pointed & Eccentric Nuts. Heavy Duty Silage Hay Spears. 2x Hay Spear/Tines ... moreConus 2 Type 820mm(32") with M22 Fixing Nuts& 2x Weld-In Mounting Sleeves Conus 2 Type - OD 57mm(2 1/4").
Buy It Now
Condition: Brand New Location: Berrigan, Australia Berrigan Economy Harrows hay fork Heavy duty frame with conus 2 tynes, perfect for picking up multiple round bales, standard with Euro hitch, we make ... moreto suit a variety of machines including manitou, Jcb, skid steer, Cat and many more. we make many different sizes you can contact us on [phone removed by eBay] or after hours on 0438981414
Buy It Now
Condition: Brand New Location: Petrie Terrace, Australia 4 x Conus 2 bale spear bushes fitted. - Includes 1 x Pair 2500kg 1070mm Class 2 Forklift Fork Tynes (lighter or longer forks also available - call for ... moreprice). - Tractor Pallet Fork Carriage. Video will open in a new window.
Buy It Now
Condition: Brand New Location: Melbourne, Australia TRACTOR LOADER TINE - CONUS 1. Bush 50mm x 110mm Conus 1. HEAVY DUTY BUSH SLEEVE. TO SUIT FRONT END LOADER FORKS.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1240mm (49"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at 500mm ... moreout from end of taper that goes into socket. 1 x Hay Spear/Tine Conus 2 type.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 820mm (32"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at 500mm ... moreout from end of taper that goes into socket. 1 x Hay Spear/Tine Conus 2 type.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 980mm (38 1/2"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at ... more500mm out from end of taper that goes into socket.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1100mm (43"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at 500mm ... moreout from end of taper that goes into socket. 1 x Hay Spear/Tine Conus 2 type.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1250mm. High quality German made tine. 1 x Hay Spear/Tine Conus 2 type. CONUS 2 type with a M28 (28mm) nut included. LOCAL PICKUP IS AVAILABLE.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1240mm (49"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at 500mm ... moreout from end of taper that goes into socket. 1 x Hay Spear/Tine Conus 2 type.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 820mm (32"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at 500mm ... moreout from end of taper that goes into socket. 1 x Hay Spear/Tine Conus 2 type.
Buy It Now
Condition: Brand New Location: Beenleigh, Australia Tine length : 1400mm (55"). Conus 1 tyne = 866KG, 1910Lbs at 500 mm out from end of taper that goes into socket. Conus 2 tyne = 3400KG 7644 Lbs at 500mm ... moreout from end of taper that goes into socket. 1 x Hay Spear/Tine Conus 3 type.
|
|
|
|