In 
 
Order by: 
Available to: 
Price: 
 - 
$
92.99
Buy It Now
$8.00 Shipping
Condition: New
Location: Allen, United States
The Belimo LMB24-3-T retrofit kit motor uses just 2va for 90 seconds, and never even gets warm to the touch! Full illustrated instructions are included. ... moreYour current damper has just two wires to the motor, will this 3 wire motor work?.
$
135.00
Buy It Now
Free Shipping
Condition: New
Location: Garland, United States
The EARD is a round damper with a 24 Vac powered-open/spring-closed motor. It is used for fresh air intake for ventilation or for combustion makeup air. ... moreSingle-blade damper.
$
185.00
Buy It Now
Free Shipping
Condition: New
Location: Allen, United States
Round dampers with this motor require a different motor with 45 degree travel. The MSTN, power open, power close actuator used with old-style, standard ... moreopposed blade dampers. 24-volt (AC), 6 Volt Ampere (VA), 50- 60-cycle, two-position motor actuator used with all Honeywell AOBD, AOBD-BM, and IOBD automatic opposed blade dampers.
$
69.99
Buy It Now
Free Shipping
Condition: New
Location: Wilmington, United States
20X20 HONEYWELL TROL A TEMP AOBD DAMPER OPPOSED BLADE DAMPER.TWO POSITION POWER OPEN AND CLOSE 24 VOLT DAMPER MOTOR USED VERY LITTLE.HARDLY AND DUST ON ... moreTHE BLADES BEEN STORED INSIDE ON SHELF WAS WORKING PERFECT WHEN REMOVED PLEASE DO NOT BID IF YOU CAN NOT WILL NOT PAY FOR THIS ITEM NO RETURNS ON ELECTRICAL ITEMS I HAVE ONE MORE OF THESE ALSO FOR SALE THANK YOU
$
35.00
Buy It Now
$12.65 Shipping
Condition: Used
Location: Hollywood, United States
Trane Zone Damper Motor ZDMTRAAL002 D150676P02 24VAC 60HZ. Condition is "Used". Shipped with USPS Priority Mail.
$
110.68
Buy It Now
Free Shipping
Condition: New
Location: Waterloo, United States
This motor is equipped with anti-rotation and drive shaft extensions. Power closed, spring open motor. PROFLO PFSAVB01 1/2" Vacuum Break - Bronze. Depth: ... more5-1/2". Top Products. Hansgrohe 28276 Techniflex 63" Hand Shower Hose - Black.
$
29.99
1d 3h 45m 43s
0 bids
$12.77 Shipping
Condition: New
Location: Staples, United States
This is an open box (opened for inspection and pics) DuroZone 8" X 12" Duct motorized controller. Has LED position indicator.
$
91.00
Buy It Now
$5.00 Shipping
Condition: New
Location: Allen, United States
This auction is for 1(one) of the above motors that fit our popular rectangular dampers"HVAC Motorized Zone Control Small(or Large) Rectangular Damper" ... moreIf you purchased one of these spring return type dampers on ebay from our store"Damper Direct" then this is the motor you need as a replacement. Precise measurements shown are for other dampers that may use this motor. To verify dimensions. This same motor has been used on other types and brands of dampers. Including Enerstat, Lennox, Jackson Controls, Robert Shaw and others. Please do be aware some dampers use similar motors but the shaft dimensions are different, and thats why we include those dimensions here. But, if you are looking for a motor to replace one on a spring return rectangular damper purchased from us, THIS IS the correct motor. For other applications. This motor says on its side"645 24V 60HZ 6W 60RPH 38398L-5-6-46" A yellow label may be attached that says"P/N 78G1001 24VAC.44 amp 60HZ" This motor is designed to operate on 24 volts ac only. If you have any technical questions you may call us at 972 633 8104. We have most replacement motors for many brands of dampers. As well as some universal fit replacements. If you do not see what you need. Dont hesitate to call and we can do a special Ebay auction for other items we carry! All motors are new inventory, 1 year warranty, and come with full service and support. From Damper Direct. Where zoning is our only business! We offer the service, support, and technical resources to help you design or service your Zone Control System. We handle all major brands including Durozone. Honeywell, EWC, Retrozone, Enerzone Systems Corp. Robertshaw, Invensys and more. If you dont see it on ebay, please ask and we can do a special Ebay auction for the part you need.
$
135.00
Buy It Now
Free Shipping
Condition: New
Location: Allen, United States
Belimo Trol A Temp MSTN EWC MAN Honeywell damper motor upgrade kit. Can be wired into system or zone still using old Trol A Temp or EWC motors. Belimo ... moremotor may be reused on our fine damper bodies in case old damper malfunctions.
$
123.84
Buy It Now
$14.00 Shipping
Condition: New
Location: Allen, United States
RETROZONE SD 5 or 6 inch DAMPER Manufactured by RetroZone Inc. The Super Duty 6 inch round Damper is a commercial grade round damper at a price that competes ... morewith residential grade dampers(for 5 inch use, order 6x5 adapters, $5 each, ships free with dampers, ask us to send an ebay invoice and we will add the adapters. We can sell this damper at this price because we are the manufacturer. There is NO MIDDLEMAN on this product! The quality of material is the best available and is backed up by a 5 year- Best In Industry Warranty. The industry leading Belimo LM24-3-T Power Open/ Power Close 3 wire motor that drives this damper has 45 in-lb's of torque which is twice the amount of strength found in dampers similarly or even higher priced, yet uses far less power than spring return dampers. RetroZone sells this damper to A/C contractors and wholesalers all around the U.S. We will sell it directly to you in our Dampers Direct EBAY store. FEATURES INCLUDE: 24vac powered and works with almost all zone control systems and thermostats. No matter what brand, with technical support by phone or email, and an industry leading 5 year warranty. Precision open and close motor adjustments allow fine tuning or air flow. Can be modulated-damper blade will not move when de-powered. heavy duty galvanized metal can. Hardware with Bronze Bushings. Not plastic. Belimo LM24-3-T Brushless 3 wire Power Open/ Power Close Motor, Very efficient: one 40va 24volt AC damper powers 20 or more dampers, Reinforcing Beads for Super Duty Strength, Durozone commercial 1/2 inch drive hardware, Blades bolted on-not cheap spot welding! Full Durozone duct rated blade seals for almost 0% leakage. Uses only 2va of power for 90 seconds opening and closing time. Compared to 8 to 10 va continuous power on spring return dampers. De-Clutch button on face of motor allows easy rotation of blade for testing. Reversing switch on motor changes blade direction, Direct drive quality. No cheap gears and springs on this damper. Works great with any brand zone
$
77.10
Buy It Now
$12.00 Shipping
Condition: New
Location: Allen, United States
This damper is made in the USA, with heavy gauge steel, anti-rattle washers, and riveted construction. Top Quality damper with an industry respected standard ... moreintegrated motor with super wide steel gear, not plastic.
$
109.99
Buy It Now
Free Shipping
Condition: New
Location: Indianapolis, United States
Once damper is closed, it will block drafts, airflow and odors from flowing through.
$
62.95
Buy It Now
Free Shipping
Condition: New
Location: Castle Hayne, United States
20X20 HONEYWELL TROL A TEMP AOBD DAMPER OPPOSED BLADE DAMPER.TWO POSITION POWER OPEN AND CLOSE 24 VOLT DAMPER MOTOR USED VERY LITTLE.HARDLY AND DUST ON ... moreTHE BLADES BEEN STORED INSIDE ON SHELF WAS WORKING PERFECT WHEN REMOVED PLEASE DO NOT BID IF YOU CAN NOT WILL NOT PAY FOR THIS ITEM NO RETURNS ON ELECTRICAL ITEMS I HAVE ONE MORE OF THESE ALSO FOR SALE THANK YOU
$
49.95
Buy It Now
Free Shipping
Condition: New
Location: San Fernando, United States
Quiet, high efficiency drive motor. With our dynamic pricing model, our prices are always competitive. You're already purchasing the item. Uses Q298B ... moreLinkage. High impact, glass-fiber reinforced plastic case is rugged, lightweight and corrosion resistant.
$
87.49
Buy It Now
Free Shipping
Condition: New – Open box
Location: Chillicothe, United States
We are not an authorized dealer of this product. This product has no manufacturers warranty.
$
119.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Minneapolis, United States
The ZD is a power close and spring open damper. It is used when a normally-open damper is required. Shape: Rectangular. What's in the Box: One Damper. ... moreCheck back daily for new deals! DVD & Blu-Ray.
$
65.00
Buy It Now
Free Shipping
Condition: Used
Location: Harrisburg, United States
This is a used item but remains in working condition. Bracket remains attached and wiring harness is in great shape!
$
118.50
Buy It Now
Free Shipping
Condition: New
Location: Allen, United States
Power use: The Belimo LMB 3 wire, power open-power close motor uses only 2 va of power, and only when in motion. The quality of material is the best available ... moreand is backed up by a 5 year - Best In Industry Warranty.
$
141.48
Buy It Now
$14.00 Shipping
Condition: New
Location: Allen, United States
Durozone by Durodyne 10 inch power open. Spring close, damper is easily convertible to power close, spring open damper for direct control from a thermostat ... moreor switch, or as a fresh air damper, and can also be used for zone control systems. This means you will not ever get stuck with the wrong configuration-Use this damper in the"normally closed" mode when connected straight to a thermostat or a switch, and later easily convert it to"normally open" if you upgrade to a zone control system. Voltage is 24 volts AC, convenient two-wire operation, 5 Year warranty-Best in the industry! Questions? Call us or write! Dampers and Zoning is our only business. Call 972 633 8104 Normal Business Hours. 5 days a week. This is the finest quality American made damper available at an unbeatable price. Qualifies as Nafta Duty free as USA built. This damper is made in the USA. And with bronze bushings, heavy gauge steel, and anti-rattle washers, and riveted contruction, there is no better 6 inch damper available at this price anywhere. Durozone is one of the largest, oldest and most respected manufacturers in the USA, and you can install this damper with confidence. And we are Damperdirect, where our only business is Dampers and Zone Control, with outstanding, on the phone tech support if you need it! Even the foam self adhesive gasket seals are also riveted in place to insure long term use at maximum UL rated furnace Outputs of 200F. Looking at another brand of spring return damper? Does it have these outstanding quality features? Industry leading 5 year warranty. And covered by our 30 day money back satisfaction guarantee. Compatible with any 24vac thermostat or zone control system. Easily converted to in the field to"Normally Open. Power Close" Use with Zone Control) operation, or"Normally Closed, Power Open" Direct to Thermostat) operation. Urethane seals riveted in place and will not come loose. Even in high heat. All steel and Bronze hardware. Not cheap plastic bushings like others! Blade
$
130.48
Buy It Now
Condition: New
Location: Allen, United States
Qualifies as Nafta Duty free as USA built. Does it have these outstanding quality features?. Blade pressed into damper shaft, not cheap spot welding! ... moreUrethane blade gaskets. Full length, heavy gauge galvanized can with roll beads for strength and rigidity.
$
109.00
Buy It Now
$8.00 Shipping
Condition: New
Location: Allen, United States
$
109.00
Buy It Now
$8.00 Shipping
Condition: New
Location: Allen, United States
$
119.00
Buy It Now
Free Shipping
Condition: New
Location: United States
8x22 ND MOTORIZED DAMPER. Condition is "New". Shipped with USPS Priority Mail.
$
89.99
Buy It Now
$8.00 Shipping
Condition: New
Location: Allen, United States
This kit will also work on almost any damper where the original motor had the output shaft of the Synchron motor shown in the last picture (motor with ... more2 yellow wires). Check the 5 digit number on the side of your synchron motor, that ends in an "R" or an "L".
$
87.68
Buy It Now
$12.00 Shipping
Condition: New
Location: Allen, United States
This damper is made in the USA, with heavy gauge steel, anti-rattle washers, and riveted construction. Top Quality damper with an industry respected standard ... moreintegrated motor with super wide steel gear, not plastic.
$
241.45
Buy It Now
Condition: New
Location: Bedford, United States
Belimo LMB24 Motorized Large Rectangular HVAC zoning damper dampner. Uses industry renowned Belimo LMB24 24vac three wire power open/power close motor ... morefrom the largest damper motor maker in the world-Belimo!
$
75.00
Buy It Now
$17.87 Shipping
Condition: Used
Location: Louisville, United States
HONEYWELL/ LENNOX- DAMPER MOTOR 56M8101 MS7110K2006 24V~ 50/60Hz 14VA CLASS 2 NEMA 2 10Nm/ 88lb in. Condition: NEW. In box NEW. No box NEW. Old inventory ... moreX USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: ONLY SELLING WHAT IS PICTURED. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, easy, and secure way to pay online. On
$
128.00
Buy It Now
$27.00 Shipping
Condition: New – Open box
Location: Danielsville, United States
Check our pictures: blades riveted (not spot welded) with heavy duty construction throughout. Polyurethane seals can be added Duro Dyne631-249-9000. Blade ... moreis riveted on, not cheap spot welded!
$
30.99
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Store Categories. Click to close full size. For warranty information. DAYTON 4HX72 Damper.Backdraft. DAYTON. Item Specifics. Item. Backdraft Damper. Type. ... moreWall Mount. Supply. Damper Size(In. 8 x 8. Outside Flange(In. 10-3/4 x 10-3/4. Use w/Dayton Ventilators. G0301987. G2096263. Item. Backdraft Damper. Flange Width(In. 1-3/8. Includes. Felted Edges For Quiet Operation. Type. Wall Mount. Supply. Overall Size(In. 10-3/4 x 10-3/4. Construction Material. 16-gauge Extruded Aluminum Frame. Aluminum Blades, Galvanized Steel Tie Rods and Stainless Steel Hardware. Max. Velocity(FPM) 2000. Package Quantity. 1. Shipping A $5 shipping and handling fee is charged on orders totaling less that $25 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $25 or more before tax. Not all products qualify for the above Shipping Policy. Additionally. Standard shipping rates will apply for all orders to Alaska and Hawaii. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-BUY-ZORO(855-289-9676) Our customer services hours are Monday through Friday from 7am to 7pm(central) Include a copy of the original order confirmation or packing slip with your RA paperwork as proof of purchase. Returns received at Zoro without a RA number may be assessed a 15% restocking(processing) fee that will be deducted from any credit due. About Us Zoro has a simple mission. We help small business stay competitive! We do this
$
19.99
Buy It Now
Free Shipping
Condition: New
Location: China
L Compatible with: Samsung DA31-00043F BCD-286WNQISS1 290WNRISA1 WNSIWW refrigerator. M12 Three-cell Six-cell Shell PCB Circuit Board for Milwaukee 12V ... moreLi-ion Battery. For Milwaukee M18 18V Li-ion Battery Chip PCB Charging Protection Circuit Board.
$
179.00
Buy It Now
$55.91 Shipping
Condition: New – Open box
Location: Fairfax, United States
You are purchasing > Aprilaire 6733 Rectangular Motorized Side Mount Damper 12"x10". New/old stock, box has shelf wear. Shipped with FedEx. CN. CC2808
$
71.09
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Store Categories. Click to close full size. DAYTON 2TGE4 Rectangular Fire Damper.11-3/4x23-3/4 In. DAYTON. Item Specifics. Item. Rectangular Fire Damper. ... moreType. Static With Fire Resistance Rating Less Than 3 Hours. Type. Static With Fire Resistance Rating Less Than 3 Hours. Standards. UL Standard 555. NFPA 80, 90A& 101, IBC, CSFM, NYC MEA. Includes. Stainless Steel Closure Spring. UL Fusible Link. Actual Size Height(In. 11-3/4. Actual Size Width(In. 23-3/4. Nominal Duct Height(In. 12. Nominal Duct Width(In. 24. Mount. Horizontal. Construction. 22 Gauge Galvanized Steel. For Use. Where HVAC Ducts Penetrate Partitions With a Fire Resistance Rating Less Than 3 Hours. Free Area(Square-Ft. 1.416. Item. Rectangular Fire Damper. Fire Rated(Hours) 1-1/2. For Use With. Low Pressure HVAC Systems. Overall Depth(In. 3-11/16. Recommended Retaining Angle. G0546131. Package Quantity. 1. Shipping A $5 shipping and handling fee is charged on orders totaling less that $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. Shipping Policy Exceptions: Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns Once your order is placed you will not be able to cancel the order. Once you receive the item. Please contact the Zoro Tools customer service team to obtain a return authorization(RA) number and a free shipping label. If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-B
$
122.26
Buy It Now
$12.00 Shipping
Condition: New
Location: Allen, United States
Qualifies as Nafta Duty free as USA built. Does it have these outstanding quality features?. Blade pressed into damper shaft, not cheap spot welding! ... moreUrethane blade gaskets.
$
130.02
Buy It Now
$13.00 Shipping
Condition: New
Location: Allen, United States
Durozone by Durodyne 8 inch power open. Spring close, damper is easily convertible to power close, spring open damper for direct control from a thermostat ... moreor switch, or as a fresh air damper, and can also be used for zone control systems. This means you will not ever get stuck with the wrong configuration-Use this damper in the"normally closed" mode when connected straight to a thermostat or a switch, and later easily convert it to"normally open" if you upgrade to a zone control system. Voltage is 24 volts AC, convenient two-wire operation, 5 Year warranty-Best in the industry! Questions? Call us or write! Dampers and Zoning is our only business. Call 972 633 8104 Normal Business Hours. 5 days a week. This is the finest quality American made damper available at an unbeatable price. Qualifies as Nafta Duty free as USA built. This damper is made in the USA. And with bronze bushings, heavy gauge steel, and anti-rattle washers, and riveted contruction, there is no better 6 inch damper available at this price anywhere. Durozone is one of the largest, oldest and most respected manufacturers in the USA, and you can install this damper with confidence. And we are Damperdirect, where our only business is Dampers and Zone Control, with outstanding, on the phone tech support if you need it! Even the foam self adhesive gasket seals are also riveted in place to insure long term use at maximum UL rated furnace Outputs of 200F. We are able to offer this extremely low price on this one size six inch damper. Since it is used nationwide by the thousands for code-required fresh air ventilation standards, and as a result, manufacturing economies of scale allow an amazingly low price this superb damper. Works equally well for zone control and other air control applications. Looking at another brand of spring return damper? Does it have these outstanding quality features? Industry leading 5 year warranty. And covered by our 30 day money back satisfaction guarantee. Compatible with any 24vac thermostat or zone contr
$
172.68
Buy It Now
$29.00 Shipping
Condition: New
Location: Allen, United States
Power use: The Belimo LMB 3 wire, power open-power close motor uses only 2 va of power, and only when in motion. The quality of material is the best available ... moreand is backed up by a 5 year - Best In Industry Warranty.
$
80.23
Buy It Now
$5.00 Shipping
Condition: New
Location: Allen, United States
$
113.00
6d 3h 17m 43s
0 bids
$15.06 Shipping
Condition: New
Location: Westerville, United States
LED's indicate damper position. Overlapping parallel blades for low leakage. Power open/Power close.
$
138.91
Buy It Now
Free Shipping
Condition: New
Location: Allen, United States
RETROZONE SD 7 or 8 inch DAMPER Manufactured by RetroZone Inc. The Super Duty 8 inch round Damper is a commercial grade round damper at a price that competes ... morewith residential grade dampers(for 7 inch use, order 8x7 adapters, $5 each, ships free with dampers, ask us to send an ebay invoice and we will add the adapters. We can sell this damper at this price because we are the manufacturer. There is NO MIDDLEMAN on this product! The quality of material is the best available and is backed up by a 5 year- Best In Industry Warranty. The industry leading Belimo LM24-3-T Power Open/ Power Close 3 wire motor that drives this damper has 45 in-lb's of torque which is twice the amount of strength found in dampers similarly or even higher priced, yet uses far less power than spring return dampers. RetroZone sells this damper to A/C contractors and wholesalers all around the U.S. We will sell it directly to you in our Dampers Direct EBAY store. FEATURES INCLUDE: 24vac powered and works with almost all zone control systems and thermostats. No matter what brand, with technical support by phone or email, and an industry leading 5 year warranty. Precision open and close motor adjustments allow fine tuning or air flow. Can be modulated-damper blade will not move when de-powered. heavy duty galvanized metal can. Hardware with Bronze Bushings. Not plastic. Belimo LM24-3-T Brushless 3 wire Power Open/ Power Close Motor, Very efficient: one 40va 24volt AC damper powers 20 or more dampers, Reinforcing Beads for Super Duty Strength, Durozone commercial 1/2 inch drive hardware, Blades bolted on-not cheap spot welding! Full Durozone duct rated blade seals for almost 0% leakage. Uses only 2va of power for 90 seconds opening and closing time. Compared to 8 to 10 va continuous power on spring return dampers. De-Clutch button on face of motor allows easy rotation of blade for testing. Reversing switch on motor changes blade direction, Direct drive quality. No cheap gears and springs on this damper. Works great with any brand zone
$
149.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Kansas City, United States
X2415 16" MOTORIZED DAMPER. SPRING OPEN / POWER CLOSE.
$
203.25
Buy It Now
Free Shipping
Condition: New
Location: United States
Store Categories. Click to close full size. HONEYWELL Q605D1069 Damper Linkage. HONEYWELL. Item Specifics. Item. Super Tradeline Damper Linkage. Type. ... moreItem. Super Tradeline Damper Linkage. Includes. Ball Joints. Motor Crank Arm and Damper Arm for 1/2" Diameter Shaft. For Use With. Internal or External Mounting. Package Quantity. 1. Shipping A $5 shipping and handling fee is charged on orders totaling less that $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. Shipping Policy Exceptions: Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns Once your order is placed you will not be able to cancel the order. Once you receive the item. Please contact the Zoro Tools customer service team to obtain a return authorization(RA) number and a free shipping label. If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-BUY-ZORO(855-289-9676) Our customer service hours are Monday through Friday from 7:00 a.m. to 7:00 p.m. CST) About Us We understand the need for small businesses to stay competitive by not paying high prices for the products you need to keep your business running. By offering one price to all customers with no complicated discount structure. We are able to keep our prices low. We have a small. Dedicated staff that works hard to bring you the best products at fair prices. We love it whether you buy a lot or just a little from Zoro Tools. We are going to give you
$
146.66
Buy It Now
Free Shipping
Condition: New
Location: Allen, United States
RETROZONE SD 9 or 10 inch DAMPER Manufactured by RetroZone Inc. The Super Duty 10 inch round Damper is a commercial grade round damper at a price that ... morecompetes with residential grade dampers(for 9 inch use, order 10 x 9 adapters, $5 each, ships free with dampers, ask us to send an ebay invoice and we will add the adapters. We can sell this damper at this price because we are the manufacturer. There is NO MIDDLEMAN on this product! The quality of material is the best available and is backed up by a 5 year- Best In Industry Warranty. The industry leading Belimo LM24-3-T Power Open/ Power Close 3 wire motor that drives this damper has 45 in-lb's of torque which is twice the amount of strength found in dampers similarly or even higher priced, yet uses far less power than spring return dampers. RetroZone sells this damper to A/C contractors and wholesalers all around the U.S. We will sell it directly to you in our Dampers Direct EBAY store. FEATURES INCLUDE: 24vac powered and works with almost all zone control systems and thermostats. No matter what brand, with technical support by phone or email, and an industry leading 5 year warranty. Precision open and close motor adjustments allow fine tuning or air flow. Can be modulated-damper blade will not move when de-powered. heavy duty galvanized metal can. Hardware with Bronze Bushings. Not plastic. Belimo LM24-3-T Brushless 3 wire Power Open/ Power Close Motor, Very efficient: one 40va 24volt AC damper powers 20 or more dampers, Reinforcing Beads for Super Duty Strength, Durozone commercial 1/2 inch drive hardware, Blades bolted on-not cheap spot welding! Full Durozone duct rated blade seals for almost 0% leakage. Uses only 2va of power for 90 seconds opening and closing time. Compared to 8 to 10 va continuous power on spring return dampers. De-Clutch button on face of motor allows easy rotation of blade for testing. Reversing switch on motor changes blade direction, Direct drive quality. No cheap gears and springs on this damper. Works great with any brand
$
165.38
Buy It Now
Condition: New
Location: Allen, United States
1. 6’L x 2’H x 5”W or 1 5’L x 2’H x 6”W HVAC Motorized Zone Control Large Rectangular Damper k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13f827ac6c1-0xfe-
$
70.00
Buy It Now
$15.38 Shipping
Condition: Used
Location: Grain Valley, United States
$
152.96
Buy It Now
$29.00 Shipping
Condition: New
Location: Allen, United States
Durozone by Durodyne 12 inch power open. Spring close, damper is easily convertible to power close, spring open damper for direct control from a thermostat ... moreor switch, or as a fresh air damper, and can also be used for zone control systems. This means you will not ever get stuck with the wrong configuration-Use this damper in the"normally closed" mode when connected straight to a thermostat or a switch, and later easily convert it to"normally open" if you upgrade to a zone control system. Voltage is 24 volts AC, convenient two-wire operation, 5 Year warranty-Best in the industry! Questions? Call us or write! Dampers and Zoning is our only business. Call 972 633 8104 Normal Business Hours. 5 days a week. This is the finest quality American made damper available at an unbeatable price. Qualifies as Nafta Duty free as USA built. This damper is made in the USA. And with bronze bushings, heavy gauge steel, and anti-rattle washers, and riveted contruction, there is no better damper available at this price anywhere. Durozone is one of the largest, oldest and most respected manufacturers in the USA, and you can install this damper with confidence. And we are Damperdirect, where our only business is Dampers and Zone Control, with outstanding, on the phone tech support if you need it! Even the foam self adhesive gasket seals are also riveted in place to insure long term use at maximum UL rated furnace Outputs of 200F. Looking at another brand of spring return damper? Does it have these outstanding quality features? Industry leading 5 year warranty. And covered by our 30 day money back satisfaction guarantee. Compatible with any 24vac thermostat or zone control system. Easily converted to in the field to"Normally Open. Power Close" Use with Zone Control) operation, or"Normally Closed, Power Open" Direct to Thermostat) operation. Urethane seals riveted in place and will not come loose. Even in high heat. All steel and Bronze hardware. Not cheap plastic bushings like others! Blade Rivete
$
223.90
Buy It Now
$29.00 Shipping
Condition: New
Location: Allen, United States
Power use: The Belimo LMB 3 wire, power open-power close motor uses only 2 va of power, and only when in motion. The quality of material is the best available ... moreand is backed up by a 5 year - Best In Industry Warranty.
$
141.92
Buy It Now
Free Shipping
Condition: New
Location: Allen, United States
A 5 year Warranty is standard with this damper. Check our pictures: blades riveted (not spot welded) with heavy duty construction throughout. Blade is ... moreriveted on, not spot welded.
$
160.00
Buy It Now
Free Shipping
Condition: New
Location: Rosedale, United States
This damper is easy to install and easy to checkout. The LED display allows the installer to visually check the damper operation. Quieter operation and ... morea longer life motor equals NO call backs. This will alleviate the confusion between side mount and bottom mount dampers.
$
166.89
Buy It Now
$12.50 Shipping
Condition: New
Location: Colorado Springs, United States
100% New OEM Parts Fast Shipping WELCOME TO OUR EBAY STORE climatedoctors Honeywell ARD8TZ Automatic Round Zone Damper ARD-8TZ Overview Honeywell Automatic ... moreRound Damper power-close, spring-open models ensure low leakage while controlling circulating air in heating, cooling and ventilation systems. Features ---Features galvanized steel with single-blade damper, which closes off tightly against gasket for minimal leakage ---Designated as power closed/spring return open damper for use with Honeywell Zoning Systems ---Can be field-converted when used as an independent zone or for fresh air intake ---Rated to operate up to 1-inch wc Product Specifications ---Application Zone Damper ---Item Type Product ---Voltage 24V ---Size (in.) 8 in.
$
164.78
Buy It Now
$29.00 Shipping
Condition: New
Location: Allen, United States
A 5 year Warranty is standard with this damper. Check our pictures: blades riveted (not spot welded) with heavy duty construction throughout. Blade is ... moreriveted on, not cheap spot welded!
$
183.27
Buy It Now
$29.00 Shipping
Condition: New
Location: Allen, United States
The quality of material is the best available and is backed up by a 5 year - Best In Industry Warranty. Even as a 3 wire damper, the versatile Belimo ... moremotor with 5 year warranty features a "one wire trigger" to work from a simple switch or thermostat, no relays needed.
$
189.99
Buy It Now
Free Shipping
Condition: New
Location: Allen, United States
Damper choices Installation: The static pressure switch mounts onto the range hood exhaust duct above the fan. Instructions provided, use standard thermostat ... morewire.
$
89.31
Buy It Now
Free Shipping
Condition: New
Location: Fremont, United States
Easy to wire, 2 wire installation. Male crimped and female non-crimped ends to connect to rigid or flexible round duct. Duct Type: 12" Round. Material: ... moreGalvanized Steel. 20-Gauge blade closes against gasket for minimal leakage.
$
168.16
Buy It Now
Free Shipping
Condition: New
Location: Allen, United States
A 5 year Warranty is standard with this damper. Check our pictures: with blades riveted (not spot welded) with heavy duty construction throughout. Blade ... moreis riveted on, not cheap spot welded!
$
49.95
Buy It Now
$14.95 Shipping
Condition: Used
Location: Port Saint Lucie, United States
Slightly Used Suncourt 8"Damper- Normally Closed. 100% Airflow Shut Off, Motorized, Galvanized Steel. Good Condition, Works.
$
4.90
4d 8h 9m 20s
0 bids
$9.45 Shipping
Condition: For parts or not working
Location: Roseville, United States
Do not order unless you see that numbers matches what you need, there are many motors that look like this from the back side. Take a look at all the photos ... moreto check the overall condition of the item(s) listed.
$
159.99
Buy It Now
$14.99 Shipping
Condition: New
Location: Opa Locka, United States
> Onezone motorized retrofit damper. > Onezone iR Thermostat. Onezone improves personal comfort. Inside the box and ofters. user manual. conditionina ... moresystem.
$
115.00
Buy It Now
$36.55 Shipping
Condition: New
Location: Martinsville, United States
The ZD is a power close and spring open damper used when a normally-open damper is required. PARALLEL BLADE DAMPER. Damper Duct Shape TypeSquare. Damper ... moreTypeZone. ApplicationParallel Blade Damper. Damper MaterialAluminum.
$
45.00
Buy It Now
$25.80 Shipping
Condition: New – Open box
Location: Vincentown, United States
$
39.99
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Backdraft Damper / Wall Shutter, Fits Fan Dia. Velocity 2000 FPM, Blade Material Mill Finish Aluminum. Light Industrial. & Recepticles. Electrical Outlets. ... moreand Enclosures. Electrical Boxes. General Purpose.
$
149.95
Buy It Now
$20.00 Shipping
Condition: New – Open box
Location: Harrison, United States
This damper is easy to install and easy to checkout. The LED display allows the installer to visually check the damper operation. Quieter operation and ... morea longer life motor equals NO call backs. LED's to Show Damper Operation.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
honeywell trol-a-temp damper 20x20 AOBD with MST 24 volt motor operator
20X20 HONEYWELL TROL A TEMP AOBD DAMPER OPPOSED BLADE DAMPER.TWO POSITION POWER OPEN AND CLOSE 24 VOLT DAMPER MOTOR USED VERY LITTLE.HARDLY AND DUST ON THE BLADES BEEN STORED INSIDE ON SHELF WAS WORKING PERFECT WHEN REMOVED PLEASE DO NOT BID IF YOU CAN NOT WILL NOT PAY FOR THIS ITEM NO RETURNS ON ELECTRICAL ITEMS I HAVE ONE MORE OF THESE ALSO FOR SALE THANK YOU
Belimo AF120-S US Spring return Actuator Damper Motor
This auction is for a Belimo model AF120-S auctuator. This unit may be new. But I am unable to test it so I am listing it as used. Thanks for looking and e-mail any questions.
BARBER COLMAN 658B-00001 CURRENT-TO-POSITION CONVERTER FOR VALVE/DAMPER MOTOR
Actually there is only evidence that it was screwed down on a back-plate. But never wired(another engineering change! Calibrated for 4-20 mA control input, but Zero, Deadband and Span trim pots allow for fine adjustment, to match your instrumentation. 120 or 240 VAC operating input; 24 to 240 VAC output at 2 Amps. Commonly used to proportion gas or air valve, or damper actuator motors with feedback slidewire.
Synchron Lennox damper motor assembly 51H7401
Synchron Lennox damper motor assembly 51H7401 Used in excellent condition Hvacparts911# 1679;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e75abad54-0x104-
Belimo LMB24-3-T Proportional Damper Control Actuator 45IN-LB Motor Non-Spring
Payment Policy Brand New Sony CyberShot 8 MP Di Belimo LMB24-3-T Proportional Damper Control Actuator 45IN-LB Motor Non-Spring Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Belimo LMB24-3-T Proportional Damper Control Actuator 45IN-LB Motor Non-Spring Used Condition Belimo LMB Proportional Damper Control Actuator 45IN-LB Motor Non-Spring Model: LMB24-3-T Torque: 45 in-Ib[5 Nm] Voltage: 24V AC/DC. 1.5W, 2VA INV# 11G90518-05-13 Item Condition Used Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive may vary from the item ... moreshown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However larger items and quantity orders take more time to pack. 2- Shipping Method: Our standard carrier is UPS for all domestic and i
Honeywell M7215A1008 Economizer Damper Motor Lot of 17
Description BID WITH CONFIDENCE WITH OUR MONEY BACK GUARANTEE! Honeywell M7215A1008 Economizer Damper Motor Lot of 17 We provided pictures to show the condition of this item. You will receive everything you see on the pictures. If it's not on the pictures. You will not receive it. SATISFACTION POLICY: It is my pleasure to serve my customers in the best manner possible and resolve any problem that may happen during the transaction. I ALWAYS WORK WITH MY CUSTOMERS TO RESOLVE ANY PROBLEMS. Please contact me through eBay messaging center. TERMS AND CONDITIONS: SOLD AS IS and UNABLE TO TEST. Please read complete description and look closely at photos. Please ask questions prior to bidding. All sales are final. The product is sold without warranties or guarantee. PAYMENT METHODS: We accept Pay Pal. Checks, certified checks. Checks must clear ... morebefore the item’s shipping. North Carolina residents include 7.75% sales tax. RETURN POLICY: Returns are accepted within 30 days from receipt of the item if the item was grossly misrepresented or does not operate as intended. All returns must be verified via email within 14 days of receiving it. The item must be returned in the same condition as when it was received. No refund on shipping. Buyer pays returned shipping. This guarantee applies to U.S. shipping addresses within the lower 48 states only(All sales or shipments to other locations will be as-is and are final) We stand behind the products we sell. We ask you for 5 star ratings in each category. If for some reason you are not satisfied with your purchase or there is a problem. Please let us know before leaving a negative feedback. Thank you for looking and bidding! Please add me to your list of favorite sellers and come again. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13eeb2693d4-0x106-
COAL FURNACE DAMPER MOTOR VINTAGE RAM PRODUCTS INC (TESTED-WORKS)
COAL FURNACE DAMPER MOTOR. RAM PRODUCTS INC. TESTED-WORKS! ITEM ALSO OFFERED FOR SALE LOCALLY WE MAKE EVERY EFFORT TO REPRESENT EACH ITEM ACCURATELY AND WITH AS MUCH DETAIL AS POSSIBLE. WE TRY TO TAKE DETAILED PHOTOS SO POTENTIAL BUYERS CAN SEE THE EXACT ITEM THEY ARE BIDDING ON. IF YOU HAVE ANY QUESTIONS PLEASE CONTACT US FOR ADDITIONAL INFORMATION BEFORE PLACING A BID. WE WILL BE HAPPY TO ANSWER YOUR QUESTIONS AND PROVIDE ADDITIONAL INFORMATION. PAYMENT MUST BE MADE WITHIN 3 DAYS OF AUCTION ENDING OR UNPAID ITEM CASE IS OPENED. WE STRIVE FOR A 5 STAR RATING AND YOUR FEEDBACK WOULD BE GREATLY APPRECIATED WHEN YOU RECEIVE YOUR ITEM.
HONEYWELL MODUTROL DAMPER MOTOR M941A 1016 3/8" SHAFT
Normal 0 false false false EN-US X-NONE X-NONE HONEYWELL MODUTROL DAMPER MOTOR· CAT. NO.M941A 1016 3/8" SQUARE SHAFT DIAMETER SHAFT DIAMETER Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: GIVE US A CALL! 803-222-0460 7am-4pm est Please call for expedited orders! Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed ... morebetween buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business chec
ORIENTAL MOTORS A5264-9415K VEXTRA STEPPING MOTOR Without Damper *S42
ITresales2 Give us a call at(408) 274-2018 E-waste Recycle We will pay $10 each Un-wanted Computer. Reused Please contact us if you have IT. Test Equipment and Secmiconductor equipment for sell. Give us a call at(408) 274-2018 Store Categories, ITresales2 ORIENTAL MOTORS A5264-9415K VEXTRA STEPPING MOTOR Without Damper*S42*S42 Condition This item was used and pulled from the working system. Though the unit is tested and is 100% functional. Description ORIENTAL MOTORS A5264-9415K VEXTRA STEPPING MOTOR Without Damper*S42 Used Unit, Actual Pictures Payment ITresales2 Accepts VISA. MasterCard, American Express With Paypal only, Cashiers Checks, Company Checks and Personal check(Personal Check, Company Check will be held 5 business days) Taxes- United States States Rate California 8.25% Taxes- International Customs. Duties and taxes are due for ... moreany shipment sent by ITresales2 outside the United States. ITresales2 is required by law to provide an invoice with each package sent outside the United States. We cannot ship internationally as a gift. Please note your government will assess taxes. Customs and duties on top of the purchase price. We strongly recommend you check with your country’s customs office to determine what additional expenses might be incurred on purchase. We will not mark merchandise values below value or mark items as“gifts” Shipping Methods& Costs Buyer pay fix amount shipping cost $10 in the 48 states. Canada. Hawaii and Alaska pay the actual shipping cost. Shipping by Fedex. UPS and USPS. All purchases are fully insured and have tracking numbers. We will send you this number automatically via email once your package ships. Please note that orders paid via Credit Card can only be shipped to the billing address for the card. We only ship to Paypal confirmed addresses in the United States. Canada and the United Kingdom. We do not ship to the following countries: Ukraine, Russia, Indonesia, Payment must received within 5 business days after our confirmation was sent to all winning bid
Belimo AM24SR-US HVAC modutrol Damper motor actuator
One used Belimo AM24SR-US Tested and working perfectly Thank's for looking
Oriental Motor Vexta Clean Damper D6CL-6.3 Stepper Motor Vibration Damper
For sale is a ORIENTAL MOTOR Co. VEXTA clean damper for reducing the vibration of a stepper motor. It is for use on a.250 inch mo t or shaft(6.3mm) and is in very good used condition. P lease do your own due diligence to insure that it is appropriate for your needs. You are buying 1 of the 3 pieces shown in the pictures. Thanks for looking.
1 USED HONEYWELL 56M8101 24 VOLT DAMPER MOTOR
Welcome to Canarsky& Daughters. We are here to sell these items. We are looking forward to doing business with you. So have fun browsing and buying. Reasonable offers are always welcomed. SEARCH OUR STORE BY CLICKING HERE! ATTN: Please read all of our updated terms and conditions posted below before bidding. If you have difficulty with these terms. Please write us with your concern. By placing your bid. You accept these terms and agree to abide by them. THIS LOT CONSISTS OF: 1 USED HONEYWELL 56M8101 24 VOLT DAMPER MOTOR. 24 VOLT DC. 50/60 HZ, 14 VA, CLASS 2, 10 NM/ 88 LBS. CONDITION: USED SURPLUS. NO REASONABLE OFFER REFUSED. The approximate shipping weight is 7 lbs. All items are sold"as is" Unless described as"new" above. Items are used. We do not have the facilities to test most of these items. You are only buying ... morethe item(s) pictured/described. ALL TECHNICAL QUESTIONS/PROBLEMS SHOULD BE ADDRESSED THROUGH EBAY CHANNELS FOR THE FASTEST POSSIBLE SERVICE. IF SENT TO OUR EMAIL ADDRESS. YOUR CORRESPONDENCE WILL GO TO THE JUNK FOLDER, AND WILL NOT GET ADDRESSED. Please note. We are not experts in these fields and so may not be able to give you the answers you require. We will, however do our best to find the information you request. THANK YOU FOR YOUR COOPERATION. This item must be settled for immediately. All items not settled for in full will be relisted or sold at our discretion and appropriate feedback will be left. Please be sure to enclose a shipping address(street address) EBay ID number, and preferred shipment method if applicable. The total due is always equal to the total of 1) the agreed amount of the item and 2) the actual shipping costs and 3) a $5.00 domestic. Or a $10.00 international, packaging and handling fee. The complete amount must be SENT VIA PayPal. PLEASE NOTE: The actual shipment of your item(s) may take anywhere from 1 to 10 days depending on such factors as the item's weight. Holidays, weather, etc. plus the actual delivery time. The tracki
IMS MDrive23 Motor Driver MDMC2231-4-GE2 Plus Vexta D6CL-6.3F Clean Damper
IMS MDrive23 Motor Driver MDMC2231-4-GE2 Plus Vexta D6CL-6.3F Clean Damper Manufacturer: IMS MDMC2231-4-GE2 With Vexta D6CL-6.3F Clean Damper Some Cosmetic Damage(See Pictures) Used And Removed From Working Surplus Please View All Photos For Complete Condition And Specifications Take A Moment And Visit Our Ebay Store Please Read Terms and Conditions USA Sales Only All auctions must be paid for with in 10 Days of end of auction. All items are SOLD AS-IS Unless otherwise stated in the auction. All end of auction notifications will be sent to your registered Ebay email address. We will combine shipping on auctions if possible. However we may not combine shipping on auctions sold by different CTR Surplus sellers. If for some reason an item has to be returned to CTR Surplus the Buyer will have to pay the return shipping. The original shipping ... morecharges are not refundable. All returns are subject to a 20 percent restocking fee. For any return you must email CTR Surplus with in 3 days of receipt of the item. Please ask all questions before placing a bid. Most items will be shipped UPS Ground and automatically insured for the bid amount. Any item that requires Truck Freight will require Buyers phone number and someone to unload the item from the truck(The Freight Company Will Not Unload The Truck) CTR Surplus 202 W. Livingston Ave Crestline Ohio 44827 Phone 419-683-3535 Fax 419-683-3230 All Auctions Will Be Automatically Insured For Final Bid Price Please click here to see my other auctions. 7.00% Sales Tax Will Be Charged On Item Price And Shipping On All Ohio Sales Powered by
Temp-A- Troll 8" x 20" Bottom Mount Rectangular Supply Damper ZDB, 24VAC Motor
Used but in excellent condition: Trol-A-Temp(now sold by Honeywell) zoning damper( Bottom of Duct Mounted) Aluminum frame and blade construction Includes the 24VAC Damper motor with spring return(2 wire) This type of zoning damper is used with power close. And spring open damper(a normally-open damper)
Parker zone damper motor
Used Parker/ Carrier zone damper motor. Works.
Honeywell Q605A,B,D,E Damper Linkage Specifications part connects Modutrol Motor
Item Details J Normal J 2 35 2011-05-14T04:28:00Z 2011-05-14T04:28:00Z 2 219 1251 J 10 2 1536 9.4402 Item Details Illustrator: Author: Honeywell Format: Large 11 x 8.5 x.1 inches Pamphlet Price: 9.99 Edition. Published at: 1000 Condition: Good Jacket Condition: Category: Honeywell Specifications Brochure Publisher: Honeywell Other notes: Large 11 x 8.5 x.1 inches Pamphlet/Brochure- no date) 11 Pages. Good Condition. two models numers highlighted in orange p,2 and p. 3, uniform punch holes, light edge/cover wear. Same Or Next Day Shipping! Honeywell Q605A,B,D,E Damper Linkage" You Save Money! WON'T LAST LONG AT THIS PRICE! All Media will be Carefully Packaged& Bubble Wrapped to Ensure Protection During Shipment. Everything we sell is In Stock! Email shipping notifications will be sent on all orders* We will gladly combine shipping ... moreon any combination of orders. Simply request a Total from us. If you want to purchase a number of items including those which may require Immediate payment. Simply email us with the Ebay Item#s and we will remove that feature so that your orders can be combined. Payment Methods We accept PayPal only for this Item. Payment is expected within 7 days. Delivery We ship every day the Post Office is Open. All items purchased are shipped same/next day. Returns We are glad to take the item back if it does not meet your expectations. All returns must made within 14 days from date of purchase/auction close. Item must be in its original condition. Refund usually made within 3 days from day of package received. Shipping and handling charges are non-refundable(unless we make an error) You may choose your own shipping method at your convenience. Thank you for your business! Jemi Books(Item#X9Pp010211645|0) Multi Channel Selling
Compumotor Stepper Motor S83-93, with Ferrofluidics Inertia Damper
Warranty All items are sold with a 30 day warranty as follows: Items damaged in shipment. Non-functional upon arrival, or incorrectly listed-Buyer will receive a full refund of all cost, including return shipping. Where multiple items are in inventory, Seller will offer to replace the item at Buyer's option. The Seller will advise regarding method of return shipping. International buyers, please see shipping provisions described below regarding the use of the USPS system. Items purchased incorrectly by Buyer. Seller will process a refund for the item. Less Seller's original cost of shipment, upon receipt of the item in undamaged, unused, and un-opened sealed bag condition. Please note: Some items have greater value because they are either new, or refurbished, and are still sealed with the original certification from the manufacturer ... moreor the refurbisher. In the event that a sealed package is opened, the refund will be discounted to reflect this loss of chain-of-custody. All return shipping will be at the Buyer's cost. As you see from our feedback. We take pride in maintaining a very positive relationship with our buyers. Please contact us immediately if there is an issue with your purchase. We will normally respond within 24 hours to any inquiry, so if you don't get a response, email again! We want your repeat business, and will do our very best to accommodate your needs. We have a strong professional mechanical and process engineering capability in our business and can answer technical questions quickly. Shipping The following oversize. Or overweight, package information is provided if you wish to obtain your own shipping quote. Length: Width: Height: Weight: Domestic USA shipping: Most items up to a weight of 70 lbs. That also do not exceed the girth plus length limit of 79 inches, are quoted in the listing using USPS Priority Mail rates. However, many heavier items can be shipped for less via FedEx Ground, our preferred shipper. While the eBay estimate you are receiving with the listing may be fo
Honeywell M836B 1033 24V Spring Return Damper Motor (Foot Mount)
For sale is a Honeywell model M836A Damper. I do not know if this is new or has been used. I connected 24 volt to the motor and motor run as should, however unable to test any farther I'll offer a 14 day return on this should it not work once you receive it After doing some online research they sell for $214.00 new. At $50.00 and I'll pay for the shipping this should be quite a bargain for the right person. Any questions please email me and I'll do my best to answer Paypal only for payment Free shipping is anywhere I can send a Priority mail flat rate package Thanks for looking.here are some specs I found Features• Operate outdoor air dampers for combustion or makeup air in residential and light commercial applications. Operate changeover dampers for heating and cooling systems. Operate minimum position dampers for ventilation ... moreand similar applications. Include internal SPDT switch for controlling auxiliary equipment. Additional motors, or to provide a burner interlock switch. Spring returns motor to start position on power failure. Drive shafts located on both sides of motor. Adjustable auxiliary switch for cascading motors or operating auxiliary equipment. Thermal breaker for overload protection during lifting stroke or if motor stalls. Product Specifications Description. Damper Motor. Fail Safe Mode. Spring Return. Control Signal. Two position. SPST. Torque Rating(lb-in. 15 lb-in. Torque Rating(Nm) 1.7 Nm. Torque Rating. Breakaway(lb-in. 30 lb-in. Torque Rating. Breakaway(Nm) 3.3 Nm. Timing Opening. Nominal(sec) Open: 25 sec. Run Time(Maximum(sec) 40 sec. Spring Return Timing(Maximum(sec) 25 sec. Angle of Rotation(Stroke Min(deg) 75. Angle of Rotation(Stroke Max(deg) 75. Motor shafts. 2. Shaft Shape. Hexagonal. Voltage. 24 Vac. Frequency. 60 Hz. Electrical Connections. Screw terminals. Internal Auxiliary Switch. 1. External Auxiliary Switches Available. Yes. Mounting. Foot-mounted. Dimensions(in. 4 1/2 in. high x 4 5/8 in. wide x 3 3/4 in. deep. Dimensions(mm) 1
Honeywell ZD8X12 Zone Damper with Motor NEW
This is coming from a closed Heating/Air Conditioning Store Auction. This does look used to me. I have no way of testing it. I do not see any physical damage other than the dirt and scratches. Please email me with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
Nailor Ind. Airfoil Blade Control Backdraft Damper - opposed 42"x60" 120v motor
Large 42"x60" Backdraft Dampers For models not pictured with motor. I do have motors on the shelf ready to install before pickup. MODELS 2010& 2020 EXTRUDED ALUMINUM AIRFOIL BLADE· ULTRA-LOW LEAKAGE· HIGH PERFORMANCE CONTROL DAMPER. Premium choice for use in high velocity. Medium pressure commercial and industrial HVAC systems. They offer unsurpassed leakage and pressure drop characteristics for superior. Performance. Model 2020 opposed blade. Is an AMCA licensed damper and provides the ultimate in ultralow leakage performance characteristics. Standard features include a rugged galvanized steel hat channel frame with die-formed corner gussets for strength. No-maintenance concealed linkage. And heavy duty extruded aluminum airfoil blades that combine superior rigidity and deflection resistance with low pressure drop. ... moreUnique design compression type seals are keyed and locked into blade extrusion. Model 2020. CONTROL DAMPERS. MODELS 2010EAF& 2020EAF EXTRUDED ALUMINUM AIRFOIL BLADE& FRAME ULTRA-LOW LEAKAGE· HIGH PERFORMANCE CONTROL DAMPER. Extruded aluminum airfoil blade and frame premium damper. Ideal for use in high velocity. Medium pressure, commercial and industrial HVAC systems. They offer unsurpassed leakage and pressure drop characteristics for superior performance. Model 2020EAF opposed blade. Is an AMCA licensed damper and provides the ultimate in ultra-low leakage performance characteristics. Features include a heavy duty extruded aluminum hat channel frame. Nomaintenance concealed linkage, and rugged extruded aluminum airfoil blades that combine superior rigidity and deflection resistance with low pressure drop. Unique design compression type seals are keyed and locked into blade extrusion. Model 2010EAF.
JOHNSON CONTROLS/ METASYS AP-VMA1420-0 VAV DAMPER MOTOR CONTROLLER
JOHNSON CONTROLS AP-VMA1420-0 VAV DAMPER MOTOR CONTROLLER. THESE WERE TAKEN OUT OF A FULLY FUNCTIONAL SYSTEM AND WILL BE ENERGIZED BEFORE SHIPPING TO ENSURE UNIT POWERS UP AND MOTOR OPERATES. NO DOA'S.
HONEYWELL / LENNOX 56M8101 DAMPER MOTOR MS7110K2006 24V~ 50/60Hz 14VA 14 VA
HONEYWELL/ LENNOX- DAMPER MOTOR 56M8101 MS7110K2006 24V~ 50/60Hz 14VA CLASS 2 NEMA 2 10Nm/ 88lb in. Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: ONLY SELLING WHAT IS PICTURED. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between ... morebuyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, easy, and secure way to pay online. On
Lennox 51H7401 Synchron 37942R- 5-6-62 damper motor
Lennox 51H7401 Synchron 37942R- 5-6-62 damper door motor This motor was taken off of a working furnace cleaned and tested and is ready to install on your furnace. Sold as is.
Honeywell M836 24V Spring Return Damper Motor
For sale is a Honeywell model M836 Damper. I connected 24 volt to the motor and motor run as should, however unable to test any farther I'll offer a 14 day return on this should it not work or not be what you need once you receive it Any questions please email me and I'll do my best to answer Paypal only for payment Will ship anywhere I can send a Priority mail domestic flat rate package Thanks for looking.here are some specs I found Features• Operate outdoor air dampers for combustion or makeup air in residential and light commercial applications. Operate changeover dampers for heating and cooling systems. Operate minimum position dampers for ventilation and similar applications. Include internal SPDT switch for controlling auxiliary equipment. Additional motors, or to provide a burner interlock switch. Spring returns motor to start ... moreposition on power failure. Drive shafts located on both sides of motor. Adjustable auxiliary switch for cascading motors or operating auxiliary equipment. Thermal breaker for overload protection during lifting stroke or if motor stalls. Product Specifications Description. Damper Motor. Fail Safe Mode. Spring Return. Control Signal. Two position. SPST. Torque Rating(lb-in. 15 lb-in. Torque Rating(Nm) 1.7 Nm. Torque Rating. Breakaway(lb-in. 30 lb-in. Torque Rating. Breakaway(Nm) 3.3 Nm. Timing Opening. Nominal(sec) Open: 25 sec. Run Time(Maximum(sec) 40 sec. Spring Return Timing(Maximum(sec) 25 sec. Angle of Rotation(Stroke Min(deg) 75. Angle of Rotation(Stroke Max(deg) 75. Motor shafts. 2. Shaft Shape. Hexagonal. Voltage. 24 Vac. Frequency. 60 Hz. Electrical Connections. Screw terminals. Internal Auxiliary Switch. 1. External Auxiliary Switches Available. Yes. Mounting. Foot-mounted. Dimensions(in. 4 1/2 in. high x 4 5/8 in. wide x 3 3/4 in. deep. Dimensions(mm) 114 mm high x 118 mm wide x 95 mm deep. Operating Temperature Range(F) 32 F to 125 F. Operating Temperature Range(C) 0 C to 52 C. Nominal Current Draw Opening(amps) 1.34
NEW Staefa Motor Control System ASU1D15 24 VAC Damper Actuator
Paypal. Visa, Mastercard, American Express. By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product warranty offered with the item. Sold-as-is. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. NEW Staefa Motor Control System ASU1D15 24 VAC Damper Actuator DESCRIPTION: ~ Up for sale is a good working new Staefa control system# ASU1D15 US 24 Vac damper actuator tool. Standard shipping or local pickup. If picking up locally. We can load your vehicle. gsrx_vers_486(GS 6.5.1(486)
RARE Vtg NEW ENGLAND COKE Co. 17V 50-60Cy 14W Damper Motor PIONEER 804000 Scarce
Very Rare Vintage NEW ENGLAND COKE COMPANY 17V 50-60Cy 14W Damper Motor in fantastic preowned condition This great and very early Damper Motor from the New England Coke Company or New England Coke& Coal. Is constructed nearly entirely of bakelite and is a terrific find for collectors. It measures roughly 4 1/2" tall and the base is roughly 2 3/8" x 4 7/8" It has inputs for red blue and white wires, plus a pair of transformer wire inputs as well. Collectors will be hard pressed to find another, don't wait! Please check the pictures carefully for the exact age and condition. It's nice! Thank you for looking and Insured Shipping is Free in the U.S.A.
Temp-A-Troll / Honeywell 8" x 18" Bottom Mount Supply Damper ZDB, 24VAC Motor
Used but in excellent condition: Troll-A-Temp(now sold by Honeywell) zoning damper( Bottom of Duct Mounted) Aluminum frame and blade construction Includes the 24VAC Damper motor with spring return(2 wire) This type of zoning damper is used with power close. And spring open damper. Posted with 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-142fec6d7f2-0xf6-
PARKER ORIENTAL MOTOR VEXTA D6CL-6.3F CLEAN DAMPER
YOU ARE BUYING ONE PARKER ORIENTAL MOTOR VEXTA D6CL-6.3F CLEAN DAMPER. THIS IS USED SHELF SURPLUS REMOVED FROM A WORKING SYSTEM AND IS GUARANTEED WORKING. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. MWGCAB) ESTIMATED RETAIL PRICE $66.00*FREE SHIPPING IS FOR THE LOWER 48 STATES ONLY. ALL OTHERS PLEASE CALL OR EMAIL FOR SHIPPING QUOTE* International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to ... moreadd me to your! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-143752452af-0xe5-
Honeywell Modutrol IV damper motor M9174B1027 120vac 27va 90deg 30sec series 90
This lot is 1pc Honeywell Modutrol IV damper motor. 120vac, cat# M1974B1027, 90 degree stroke, 30 second time. Any questions, please ask. Will ship at 10lbs. Thanks for looking.
Honeywell M892A Damper Motor
Up for sale is a rare honeywell M892A damper motor! Tested& in working condition. Not exactly sure if it was used or not might be new! But listing it as used just because I don't know. Lists@ $350 new! Excellent condition! Bid with confidence 100% feedback! Thanks for looking! Check out my other items! Posted with
Johnson Controls METASYS AP-VMA1420-0 VAV DAMPER Motor Controller+NEW COMM. PIN
Here we have used JOHNSON CONTROLS METASYS AP-VMA1420-0 CONTROLLERS with BRAND NEW COMMUNICATION PINS added after removal. All are in good. Clean condition. Fully functioning when removed from working system. 30 available to start. Please ask for any additional info needed. Approximately $400 new. Get what you need here for a good value! Shipping is FREE and within the USA only(Additional shipping fee if going to Hawaii or Alaska) Please pay within 7 days by Paypal only. Thanks for looking& GOOD LUCK!
D.L. & W. Coal Co. Damper motor
17 volt. 14 watts, damper motor, cat no. 1231. In good working order, perfect replacement part!
Vexta Oriental Motor PK596-B PK596B 5 Phase Stepping Motor w/Damper
PK596-B 5 Phase Stepping Motor 0.7/Step w/ Clean Damper 0.7/Step Item Condition: Used Quantity: 3 unit Cosmetic Condition: with some scratches Functionality: Remarks: Actual Weight: 1.8Kg Dimension: 9x9x14- Comes with 14 days money back guarantee. We ship FAST via DHL worldwide(except for South America and Russia- see notes below) For single quantity listing. Winning bidder shall receive the actual item as shown. Accepts paypal and wire transfer payments only. Thank you. NOTE: Please note that upon paypal payment. Once the shipment address is provided, it will be best to provide your current phone number as well so we can write it down on the package. Locator: 131160-KRN. PB4354-3(3) UNQ123 =================================================================================================================== TERMS AND CONDITIONS ON EACH SALE ... moreWARRANTY: All NIB(New-In-Box) NOB(New-Open-Box) and NNB(New-No-Box) comes with 14-days money back guarantee. All"USED" equipment had been tested and are guaranteed functional. Also comes with 14-days money back guarantee. All items that are declared"AS IS" have no warranty.No returns, and no refund. SHIPPING(DHL) In our quest to have the item arrived to you the soonest. We subsidize some of the shipping cost and make DHL as our standard courier. We send tracking number after each shipment. If we miss it. Please do not hesitate to send us a message. DHL shipping normally takes 2 to 5 working days to most worldwide destinations. Due to very high customs charges. We discourage DHL shipping to South American countries( Brazil,Ecuador, etc. and propose to use AIR PARCEL shipping instead. However. If you badly need the item and customs charges will not be a problem, we can still ship via DHL. If you want the item shipped to South America
Honeywell 8x12 AOBD-BM Automatic Opposed Blade Damper with MSTN motor
This is a used damper pulled from a working residential zoned HVAC system during an overall upgrade that was not compatible with these. The damper and damper motor were working at the time they were pulled from the system. Note. The picture of the motor label was taken last and I removed the wires for easy viewing. It is the same motor as in the other pictures.
Honeywell HVAC Duct Damper Actuator/Motor M847D1004 Zone Control 24VAC
This offering is for a Honeywell Damper Actuator/Motor M847D1004 Zone Control 24VAC. Item is used. And was removed in perfect working condition, from a office remodel. Used in HVAC Zone control for damper actuation. 24VAC, 60Hz, 6watt. UPC-085267831000. If you have questions. Please e-mail. Will accept PayPal or other forms of payment as arranged. Thank you for your time and good luck! Sorry. We are unable to ship to CA addresses.
HONEYWELL M836B1033 24V Spring Return Damper Motor TESTED
The listing is for a Honeywell M836B1033 Damper Motor. Two position spring return control circuit: 24V. 60Hz, 75 degree stroke. Includes everything pictured, crank arm accessories; universal mounting bracket. This item has been tested and is in working condition. It includes the box. Motor, and parts as pictured. The item pictured is the exact one you will receive, please see the photos. Visit our eBay store for more great gifts! Thanks for looking. If you have any questions. Please email us through eBay for fastest response.
STAEFA ASUD15F/A OPEN AIR ACTUATOR / DAMPER MOTOR
STAEFA CONTROL SYSTEM OPEN AIR ACTUATOR-DAMPER MOTOR USED BUT IN GREAT CONDITION CAT- ASUD15F/A US 24VAC/ 10VA 6W IF ANY PROBLEMS OR NOT HAPPY ABOUT SOMETHING I EXCEPT RETURNS AND IF IT IS A ISSUE WITH THE ACTUATOR OR NOT EXACTLY LIKE THE DESCRPTION I WILL REFUND ALL SHIPPING COSTS. ALL THIS INFORMATION IS IN THE LISTING RULES WITH EBAY
OEM Lennox G20 Whisper Heat damper motor
Used OEM Lennox G20 Whisper Heat damper motor. Wires have been cut so you will have to wire nut to existing wires on wiring harness. I did leave it on the mounting bracket. Free USPS priority shipping. Thanks for looking and have a grateful day!
Powers Pneumatic Damper Motor 331-2792 U10
Powers Pneumatic Damper Motor 331-2792 U10 Description- Model: U10- Manufacturer: Powers- Pneumatic Damper Motor- SPR. 8/13- Damper motor was pulled during service change out- Comes as pictured#8981(JM) 03/03/14 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem ... morewas. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International weight and size restrictions vary. We will ship your item to the most cost eff
Belimo TF120-S Day Actuator Motor with Arm from Damper
Cinnamama's Store Belimo TF120-S Day Actuator/ Motor with Arm This item came off from a damaged damper and appears to been unused. In looking at photos of other it appears to be missing a piece so please see photos to know what you are getting. General Information Most of our items are from Estate Sales or Local Auctions. Items are sold as is so please view pictures for item condition and ask any questions prior to bidding/buying. Payment Payment is appreciated within 4 days. We accept Paypal. If you are unable to pay within this time frame please contact us to make other arrangements. Shipping Information Free shipping is for continental United States ONLY. If you live outside this area please contact us for a shipping quote. Returns We will accept returns within 14 days of buyer receiving the item. Buyer pays return shipping costs. ... moreRefund will be given as money back. Visit to see our other items for sale. New items added daily. Thanks for Looking! Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14491d91723-0x100-
Belimo SM24 24 vac/dc 50/60 hz 133 in-lb class 2 supply Damper Motor Actuator
Great Belimo SM24 actuator motor. connects to class 2 supply only. 24 VAC/DC 50/60 HZ 133 in-lb. Works fine. Clean non smoking home I ship items M-F. I will ship when payment is completed. Collectorofall Since 1997
Damper Motor Carrier Infinity Bryant Evolution DAMPACT45DEG-R 45' HF21KJ007
This is a used but working damper motor(power open/power close) This is the replacement style that can fit both shaft types. The damper motor is about 6 years old and is in fair condition. I tested the damper multiple times and it opens and closes properly. Due to age. I can offer no warranty.
Carrier Damper Actuator Motor 45 Degree P/O P/C 100% Tested Good
Great damper motor! Used 45 degree power open power close actuator. Tested them before removing. Both run smooth. Thank you for looking! Posted with
Lennox OEM G20 Whisper Heat 51H7401 damper motor
Lennox G20 Whisper Heat OEM damper motor 57H7401 This damper motor was taken from a working furnace cleaned and tested and is ready to install on your furnace. Sold as is.
Powers Pneumatic Damper Motor 331-2795 Y50
Powers Pneumatic Damper Motor 331-2795 Y50 Description- Model: Y50- Manufacturer: Powers- SPR 8/13- Style: Actuator with forward travel stops- Motor and Accessories Product- Damper Motor was pulled from a working environment- Comes as pictured#8982(JM) 03/03/14 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t ... morefix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International weight and size restrictions
VEXTA D6CL-6.3F CLEAN DAMPER FOR STEP STEPPER MOTOR
YOU ARE BUYING ONE VEXTA D6CL-6.3F CLEAN DAMPER FOR STEP STEPPER MOTOR. WHAT IS PICTURED IS WHAT YOU WILL RECEIVE. THIS IS USED SHELF SURPLUS FROM A SHUT DOWN EVERGREEN SOLAR FACILITY AND IS GUARANTEED NOT D.O.A. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION. G2BD) Estimated Retail Price: $47.30 International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your!
LIN 5718M-05DE-18RO STEP STEPPER MOTOR 1/4" SHAFT VEXTA D6CL-6.3F CLEAN DAMPER
YOU ARE BUYING ONE LIN 5718M-05DE-18RO STEP STEPPER MOTOR 1/4" SHAFT VEXTA D6CL-6.3F CLEAN DAMPER. WHAT IS PICTURED IS WHAT YOU WILL RECEIVE. THIS IS USED SHELF SURPLUS FROM A SHUT DOWN EVERGREEN SOLAR FACILITY AND IS GUARANTEED NOT D.O.A. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION. G2BD) Estimated Retail Price: $233.64 International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me ... moreto your!
VINTAGE HONEYWELL COAL FURNACE DAMPER MOTOR HEATING THERMOSTAT T21A300X8OA1
You are Looking at a new old stock JUNE 3 1940 HONEYWELL ACRATHERM HEATING THERMOSTAT T21A300X8OA1 COAL or wood stove FURNACE DAMPER MOTOR THERMOSTAT CONTROL AS PICTURED MOUNTING SUB BASE instructions and original box. MECHANICAL CONTACT POINTS. IT IS FROM A LONG TIME HEATING CONTRACTOR RETIREMENT SALE. B uyer pays the Shipping from 44624 Shown on the E bay Shipping Calculator which should be close to actual. If any questions or unsure of something. E mail, Thanks for looking
Siebe Barber-Colman Damper Works 24 volt Motor Electric Actuator MA-305-0-0-2
Up for Bid: Siebe(Barber-Colman) Electric Actuator MA-305-0-0-2 Damper Motor 24v Comes with quadrant and rod coupling Calculated Shipping: Priority Mail from zip code 60133 at 7 lbs. 1 oz, Pre owned. Used, Tested before i listed,WORKS! Cleaning out the garage.
SIEMENS 3Y2 DAMPER MOTOR 331-2889 ACTUATOR B306421
Product Specifications. Brand: SIEMENS, Condition: Used, Model: 331-2889, Type: Actuator, Weight: 1 lbs, Dimensions: 10 x 3 x 3 in, SKU: B306421(PGC) Category: Valves· Replacement Parts, Additional Notes: DAMPER 3Y2 Product Photos. $50 USD We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship items within 1 Business Day of receiving cleared payments. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. We only offer Collect Shipping via UPS. If the item is ... moreto be shipped via Freight. Please contact us for a shipping quote. You may also choose to have your shipment picked up by your carrier. We will palletize, strap and shrink-wrap your shipment. We offer a 7 day courtesy holding period for our clients, but shipments are subject to storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence as we put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer an amazing buying experience to all our customers. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. NRI is not responsible for technical specifications or fitment/application of a
Whirlpool Kenmore Maytag Fridge Damper Motor Assembly W10196393
DAMPER MOTOR ASSEMBLEY Maytag/ Kenmore Refrigerator Part# W10196393 Whirlpool brands include Whirlpool. Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others Used and in great condition. See photo(s) Make me a reasonable offer on the part. Click on MAKE OFFER above THIS PART WAS REMOVED FROM MAYTAG REFRIDGERATOR MODEL MBF2258XEB0 MAY FIT OTHER MODEL REFRIDGERATORS. I have other parts for this model fridge. Click here for more parts for this model I ship within one day of payment. My feedback speaks for itself FREE SHIPPING
Frigidaire Refrigerator Motorized Damper Motor 241518501
Frigidaire Refrigerator Motorized Damper Motor This is a used Damper Motor. P/n 241518501, for a Frigidaire side by side unit. Damper motor works perfectly and comes from my personal refrigerator, model FSC23R5DW0, that could no longer cool down. Everything with the fridge worked properly except was loosing Freon and too costly to repair. The part number listed is for the Frigidaire SxS model listed but may also fit Kenmore& Whirlpool brands. Buyer is responsible for ensuring this part fits your specific refrigerator. This item is guaranteed to work and comes with a 7 day warranty. Returns are accepted for defective item only. Please contact me if there are any issues with this item. Refunds will be issued once the original item has been received. Conditions of Sale By placing a bid. You are entering into a legally binding contract to ... morepurchase the item if you’re the winning bidder. By placing a bid, you agree to abide by the sellers terms and conditions listed below. The terms are not negotiable after your bid is placed. If you purchased an item in error, please contact me. Payments I accept paypal payments in US money only. I do not accept payments from International buyers. My paypal account will only accept payments from US buyers. All others will be blocked. I do combine shipping. Please use the shopping cart option when purchasing more than one item. Then you will be able to request a revised invoice with combined shipping. E-bay will require immediate payment if the shopping cart is not used when you make your purchase. Payment is requested to be made within 7 days, please contact me if you need more time. If communication has not been made for your payment, I will let e-bay take the appropriate action. If your e-check payment is declined by paypal, I reserve the right to cancel the e-bay transaction. If you do not have a paypal account please contact me to make other payment arrangements. Feedback Feedback is a very important part of the e-bay community. I will leave feedback when I know your item has
Honeywell Modutrol Motor M904E 75DS Damper Valve Actuator 24 vac M904E75DS
This Honewell Motor came in great shape! It almost looks brand new for it's age and has been tested to work. It comes with a 14-day guarantee. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14564ad957c-0x10d-
Vexta PK266-01B PK26601B 2-Phase Stepping Motor DC 1A with damper
This motor has been lightly used. I have many of these motors message me for quantity discounts. I also have these without dampers installed- see my other listings.
VEXTA EM569 BUA STEPPING MOTOR 1.4A W/CLEAN DAMPER D6CL
BT# 9818 M07E2-090.1Y You are looking for: VEXTA EM569 BUA STEPPING MOTOR 1.4A W/CLEAN DAMPER D6CL USED ITEM. FULLY TESTED! 10 DAYS WARRANTY! Manufactured by: ORIENTAL MOTOR. Additional info: EM569 BUA STEPPING MOTOR 1.4A WITH CLEAN DAMPER D6CL. Model: EM569BUA 5-PHASE DRIVER DC 1.4 AMPS 1.7 ohm Clean Damper Model: D6CL-8.0 Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by
Johnson Controls M9220-GGA-YK10 Rotary Control Damper Actuator Motor
YOU ARE BIDDING ON JOHNSON CONTROLS M9220-GGA-YK10 ROTARY AC CONTROL DAMPER ACTUATOR MOTOR. THE IS USED BUT IN GOOD WORKING ORDER. PLEASE LET ME KNOW IF YOU HAVE ANY QUESTIONS.
Multiproducts MP 210 24 volt spring return damper motor
Multiproducts MP 210 damper motor 24 volt 1.5 amps used once
GENUINE HOTPOINT FRIDGE FREEZER DAMPER MOTOR COVER
Hotpoint FRIDGE FREEZER DAMPER COVER Excellent Condition Removed From Hotpoint Model No. FFM90 Please Ensure This Fits Your Requirements Before You Bid Any Questions? Please Ask
HONEYWELL M436A1090 DAMPER MOTOR
HONEYWELL M436A1090 DAMPER MOTOR Some rust from shelf storage. As shown. 120-240v 27 watts Moneybookers/Skrill payment only.
Fan Motor Box 8-1/8 X 8-1/4 X 3-3/4 W/ 3" Damper
Fan Motor Box 8-1/8 X 8-1/4 X 3-3/4 W/ 3" Damper You are Bidding On: Fan Motor Box 8-1/8 X 8-1/4 X 3-3/4 W/ 3" Damper Gre at Deal! CLICK TO: Visit My eBay Store*International buyers. We will ship worldwide, contact us before you make your purchase for an international shipping quote. Monday-Friday 8a.m-5p.m Eastern 1-855-869-6191* WE WILL ENTERTAIN ANY OFFERS* If You Have Any Questions Please Call 1-574-312-4837 Office 1-855-869-6191 THANKS AGAIN! RC RECYCLING. Location: F-1 TAG#8007 SHIPPING: Fan Motor Box 8-1/8 X 8-1/4 X 3-3/4 W/ 3" Damper Lister: AB We gladly accept PayPal. Certified Funds, Credit Cards or Cash for local pickups. Payments must be received within 4 days, of RC RECYCLING providing shipping details. Shipping price shown is for shipping in the US to lower 48 states only. International buyers. We will ship worldwide, ... morecontact us before you make your purchase for an international shipping quote. We usually ship items on the day payment is received. Our shipping hours hours are from 8am-4pm Eastern time. FREIGHT SHIPMENTS: Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. ALL SHIPPING QUOTES WILL BE SHIPPING TO A BUSINESS WITH A FORK LIFT OR LOADING DOCK. IF IT IS GOING TO A RESIDENTIAL ADDRESS PLEASE MESSAGE US AND WE WILL ARRANGE A TRUCK WITH A LIFT GATE. PLEASE READ BEFOR BUYING Unless Sold As-Is(STATED IN THE DECRIPTION) All of our products come with a 14 Business Day Warranty. Beginning the day item is received. Returns are only accepted on items received in different condition or a mistake made by us. If your item is received in a different condition than stated(DOA. Not working properly etc? Please message us or call with your ebay item number ready We are more than willing to rectify any problems by replacing the item or issuing a FULL refund. Instructions for Returns: 1. Contact us! ATT: TINA. Message us first and then call us with your ebay item number ready(855)869-6191.We need to know
Honeywell Damper Motor Lennox part #56M8101 MS7110K
Good Used Motor! 100% Guaranteed! Full Refund or Replacement! No Questions Asked!
DACOR 66378, 66482 MICROWAVE DAMPER MOTOR & CAM ASSEMBLY GENUINE OEM! SHIPS FREE
For sale is a used Dacor microwave damper motor and cam assembly. They are part numbers 66378 and 66482. While the parts are used, they are guaranteed to work up the manufacturer's specifications. If you need me to tell you if this is the right part for your machine. Please send me your complete model number and I will let you know as quickly as possible. PLEASE contact me before purchasing this part. Some appliance parts may look the same as the one you have. But they may not work in your machine since there is only one part designed for it. Please send me your complete model number and I will look up your model to see exactly what part is right for it. If you get the wrong part I cannot be held responsible if you didn’t let me look it up for you. Appliance parts must be installed by an appliance technician because the part only has ... moremanufacturer warranty if it was installed by a valid appliance repair company. I cannot be responsible for damage to a part due to incorrect installation. RETURNS: I know you wouldn’t want to have to go through the trouble of paying to return a part so please let me advise you on the exact part that you need before you purchase it. Returns are accepted within 14 days only if the part has not been installed(I can tell if it has been) and is still in the original packaging. Please contact me before returning any item. For more information on returns please read the return details under this listing's returns section. SHIPPING: I ship only to the continental United States. There is always free shipping and I don’t charge any handling fees. The package will ship the same or the next business day. PROBLEMS: I will work hard to earn your best feedback. If there is any problem with your purchase. Please contact me right away and I will work with you to resolve it. If you are happy with what you bought from me, I would love it if you could leave feedback so others will know how much I care about my buyers.
KMC HPO-0013 24vac DAMPER MOTOR Synchron P/N 630 4W 60RPH 37680-C-10 0929
SYNCHRON MODEL 630 TIMING MOTOR.24V 37680-C-10 0929.KMC P/N HPO-0013. 4W.60RPH.MOTOR WAS PULLED FROM A WORKING HVAC SYSTEM THAT WAS UPGRADED TO ANOTHER SYSTEM. BUYER TO ADD $12.00 FOR S&H TO LOWER 48 STATES. SHELF:BILL-A-3 NICK
Ferrofluidics Inertia Harmonic Vibration Damper Step Stepper Electric Motor 3/8
FerroFluidics Inertia Fluid Magnetics Drive Step Stepper Motor Damper 660-A5591 From FerroFluidics Corp website: A stepper motor operated at its natural frequency may experience excessive settling time. Vibration and acoustic noise. A Ferrofluidic damper relies on ferrofluid to absorb the motion energy by a shearing effect which produces a torque that opposes the unwanted oscillatory motion. A Ferrofluidic damper is hermetically sealed and has a non-magnetic housing which attaches to the motor shaft. Inside the housing is an inertial mass which levitates on Ferrotec's ferrofluid, thus eliminating the need for bearings to support the mass. A Ferrofluidics damper offers reliable damping and accurate performance with no losses in speed or accuracy, and no reduction in torque. Other performance benefits include: increased positional accuracy- ... morereduced settling time- reduced torsional oscillations A Ferrofluidic inertia damper is easily attached to the motor shaft and has no maintenance requirements. It can be custom tuned to your system for optimum results. Typical applications include X-Y-Z Plotters. Printers, Optical Scanners, Robotics and Milling Machines. Approximate Size: 3.75" diameter. 2.2" height, for.35- 3/8" diameter motor shaft Collar included GREAT FOR: Selling Re sellers Surplus Distributors Sell Material Parts Supplies Dealer store Business Businesses Office Retail Retailer Market Home Manufacturer MRO Manufacturing Assembly or Production support Factory Office Offices Building Maintenance Supplies Tools Equipment work shop Garage Repairs Repair service shop fixes Restoration parts swapping servicing Maintenance Geek or Intellectual Static Generator Tesla Coil Parts DIY Do It yourself at home projects Crafts Hobbies Guide. Techniques, Ideas Projects Activities Handmade Creative Creativity making it from scratch Technical Techniques Heavy Metal Gear Heads Race Car Automobile enthusiasts Teaching Teachers Instruction Training aid Workshop Seminar School College High Jr. Elementary Studen
Johnson Controls M9220-GGA-3 Rotary Control Damper Actuator Motor M9220GGA3
Help Line: 248-305-7900 Browse By: All Items Buy It Now newly listed ending soonest lowest first highest first Shipping: lowest first Price + Shipping: highest first eBay Store About Us Feedback FAQs All Listings Guides My World Contact Us Store Categories Shop By Brand Hot Deals Johnson Controls M9220-GGA-3 Rotary Control Damper Actuator Motor M9220GGA3 why buy from us Microsoft Registered Refurbishers Low Prices all year round Thousands of Satisfied Customers Next Business Day Shipping Available All Orders Professionally Foam Packaged We Use Only New Shipping Materials All Packages Are Insured Against Damage Order confirmation& shipment notification with tracking information 100% Accurate and Detailed Listings Thousands of Quality OEM PC. Servers, Parts and Networking Gear All items in stock& ready to ship Highly Rated Customer ... moreService- Check our Feedback Excellent Sales Team Before and After your Purchase Highly Skilled Technicians with over 20 years Experience Product Description. M9220-GGA-3 This is a used Johnson Controls rotary actuator. Model no. M9220-GGA-3. The specifications on this control is 15.6VA/ 7.5W. AC/DC 24V, 20Nm(177 in-lb) Selling with Warranty. This unit was pulled from a working Datacenter AC Unit. The Datacenter is being parted out. See our other listings The M9220-GGA-3 Actuators are direct mount. Spring return electric actuators that operate on these available power options: AC 24 V at 50/60 Hz or DC 24 V(AGx. BGx, GGx, HGx) These bidirectional actuators do not require a damper linkage. And are easily installed on dampers with 1/2 to 3/4 in. or 12 to 19 mm round shafts, or 3/8 and 1/2 in. or 10, 12, and 14 mm square shafts using the standard shaft clamp included with the actuator. An optional M9220-600 Jackshaft Coupler Kit is available for 3/4 to 1-1/16 in. or 19 to 27 mm round shafts, or 5/8 and 3/4 in. or 16, 18, and 19 mm square shafts. A single M9220-xxx-3 Electric Spring Return Actuator provides a running and spring return torque of 177 lb·in(20 N·m) Two or three
New in the original box HONEYWELL M436A 1116 DAMPER MOTOR 120 V for HVAC n/r
Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge This motor is new in the original box. So I assume it is working. If you get it and it is not working, Just return it to me and I will refund all your money, including the shipping. Please see the pictures for the description, and please email me any questions as I know nothing about HVAC stuff. Buyer pays $14.95 shipping in the U.S. for Priority mail. Foreign shipping is more. Well, the P.O just raised shipping charges again. 33% increase on foreign shipping. I will keep my shipping charges as low as possible, and I will combine shipping to save you as much money as possible. But with these increases and ebay still taking 10% of your shipping charge, and Paypal taking 5% of the shipping fee, it is getting hard. I will still ship overseas, but the minimum ... moreshipping charge for overseas shipping is $29.95. Foreign bidders MUST, MUST, MUST email me for the shipping charges before bidding. NO EXCEPTIONS. Please email me any questions. Thanks for looking. Inkfrog terapeak. I000000.
Parker Compumotor S83-93 Stepper Motor w/ Ferrofluidics Inertia Damper
Parker Compumotor S83-93 Stepper Motor w/ Ferrofluidics Inertia Damper This is another fine Gizmo from SurplusGizmos located in Hillsboro Oregon. You may be interested in. Parker Compumotor S83-93 Stepper Motor w/ Ferrofluidics Inertia Damper Item Description and Features: Please see pictures for more info. Please look over the photos carefully and do not assume anything about the item(s) included in this listing. This item is sold as you see in the pictures. Unless otherwise stated. If it is not pictured, it is not included. We are not experts and do not claim to be with any of the items we sell. We do the best research we can in order to properly represent the item(s) as clearly and honestly as possible. We strongly encourage buyers to do their own research beforehand. If you have any questions, please ask before you make your purchase ... moreand we will do our best to answer your questions to the best of our abilities. Please contact us directly before opening up a case against if there are any issues with your order, item, etc. Item Condition: Used. Full operating condition unknown due to inability to test. Please see pictures for more details. Item is sold"as is" No guarantee, Testing Done: No testing done, You will Receive: 1) Parker Compumotor S83-93 Stepper Motor w/ Ferrofluidics Inertia Damper Item Weight: Shipping Weight is approximately 10 pounds. If purchasing multiple items. We will send you an updated invoice with combined shipping when possible. You can also reach us by visiting our retail store directly or via phone during normal business hours. SurplusGizmos is located at: 5797 NW Cornelius Pass Road. Hillsboro Oregon, 97124 Retail hours are Tue- Fri 10am- 6pm. Sat 10am- 5pm Store phone is 503-439-1249 Feel free to stop by to examine items during regular hours. Shipping methods are as follows: Local pickup is abvailable but please call so we can have the item ready. Items are generally shipped in 2 to 3 business days(Tuesday thru Friday) after payment has cleared except for large objects that
1923 Cole Motor Car Co, Damper Valve - Vintage Print Ad
Original Print Advertisement 1923 Cole Motor Car Co. Damper Valve- Print ad from a vintage magazine. An original item. Collectible and perfect for framing! Approximate size: 6.5" x 10" Condition: Excellent_ Shipping Prompt shipping. Careful packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
Johnson Controls Metasys AP-VMA1420-0 th1031723020 Damper Motor Controller
Johnson Controls Metasys AP-VMA1420-0 th1031723015 Damper Motor Controller Pulled from working environment Screwhole chipped seen in pictures. Needs longer screw to attach
FRIGIDAIRE DAMPER MOTOR COVER # 241511201
Here is the Damper Motor Cover From a Frigidaire Side by Side#FLSC238DS7 It is in perfect condition. Thanks For Looking! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1476d2d6b35-0x109-
HONEYWELL M436 DAMPER MOTOR, 120V, 60 HZ, 27 WATTS, USED
We do honor our 14 day return policy. If you should get an item that does not work, unless otherwise stated in that items description. However. We do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WHAT YOU SEE IN THE PICTURES. IS WHAT WE SEND TO YOU! CHECK OUT OUR SALE ITEMS IN OUR STORE! HONEYWELL M436 DAMPER MOTOR 120V 60 HZ 27 WATTS USED- SURPLUS APPROXIMATE SHIPPING WEIGHT 9 LBS N/6/7 TK WE APPRECIATE YOUR BUSINESS. AND WISH TO MEET YOUR NEEDS. PLEASE CALL 731-635-3167 WITH ANY QUESTIONS. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. ... moreSEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION. AND READ THE IMPORTANT INFORMATION ABOUT DESCRIPTION BELOW! Please understand that our items are surplus. They come here from factories that have been closed or from other similar situations. Therefore. We do not have first hand knowledge of their history. We do not have the equipment to test many of these items, therefore, we do not know if they are in perfect working condition. We try to be as accurate as possible with our listings. But we are not experts and many of our items are things we know nothing about. There is no eBay condition description for surplus items, so please do not rely solely on the standardized condition description from eBay. We use our best judgement on the condition, and include lots of pictures. Please look closely at the pictures. And contact us with any questions or to ask for more detailed pictures if needed before making your decision to purchase. We have no desire to mispresent. ALL OF OUR SALE/CLEARANCED ITEMS ARE SOLD AS IS. NO RETURNS* ALL PAYMENTS AND FREIGHT SHIPMENTS ARE TO BE MADE WITHIN 5 DAYS. COMBINED SHIPPING IS ALWAYS AVAILABLE. AND THANK YOU FOR SHOPPING WITH US!
Spoon Sports motor damper
Spoon Sports motor damper. Used with some scratches on mounting brackets. Real deal Spoon part. Spoon doesnt offer the set for sale anymore. Brand new damper set goes $350-$400 online. b-series for eg dc or ek. Ive had it on my ctr clone bb6.Cb accord. No e-checks.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1479e8aee6a-0x119-
6" D x 10.5" Length Motorized Damper Actuator 24VDC HVAC. USED NO MOTOR COVER
Call Brett At 309-261-5695 for questions. cw13 View all photos carefully. inventory 780 If you have problem with purchase immediately call Brett at 309-261-5695 BEFORE filing a case. Lets resolve together quickly as possible. We only ship to the verified address given in PayPal payment. Please make sure payment address in PayPal is correct. If you wish to have your item shipped to a different address you will need to first change your address in PayPal before purchasing. Payment due within 7 days of auctions end.
Steel Mounting Bracket with Damper For 42mm NEMA17 Stepper Motor with Screws
Steel Mounting Bracket with Damper For 42mm NEMA17 Stepper Motor with Screws Better performance! with the mounted damper. It is ideal for applications where motor noise and vibration need to be minimized
EWC Motorized Damper Motor MA ND3 Power Open Power Closed
Motor is power open power closed. Model MA ND3 24 volts Is good working condition. Damper was upgraded when a blade on mechanical damper broke. Damper motor works great. Sold as is no warranty Shipping lower 48 only PayPal only Pay after auction please I will leave feedback after feed back is left so I know you received product. Thank you for looking! Posted with
LIN 5718M-05PD-20RO, 2.8A Stepping Motor w/ VEXTA D6CL-6.3F Clean Damper
Add my Store to your Favorites and receive my email newsletters about new items and special promotions! General Interest, LIN 5718M-05PD-20RO. 2.8A Stepping Motor w/ VEXTA D6CL-6.3F Clean Damper PAYMENT: Payment is due upon receipt of your invoice. We accept PayPal payments and all major Credit Cards during the checkout process. We do not collect credit card or personal information. COMBINED SHIPPING: We always adjust shipping costs for multiple items paid for and shipped within the same business day. Items or quantities requiring multiple packages may not receive a discounts on shipping. SHIPPING: We ship using UPS and the US Postal Service(USPS) We do allow customers to use their own UPS account for overnight or special shipping situations. A packaging fee may be applied to your invoice. It is your responsibility to provide a deliverable ... moreship to address at the time of purchase. Most orders are shipped same day with the exception of freight. Overnight Shipments: We can accommodate most requests. It is recommended that you make your purchase and payment before 3 PM MST. We do not refund overnight shipping costs. A valid phone number is required. Overseas Shipments: We ship USPS Priority Mail International in most cases. Each country has its own unique weight and size restrictions when using USPS. IF your package is over the USPS limits for your country. We will quote you UPS costs. Delivery times vary per country, we do not guarantee delivery times or how long the host country holds a package in customs. we have seen shipments via USPS take as long as 6 weeks. We do not allow self shipping and carrier pickup on non freight packages; we can ship items using your UPS account through our system. We do not ship FedEx, DHL, or any other shipper except UPS and USPS. Overseas Freight: Some items may require a special certified crate be made prior to shipment. This cost will be added to any freight charges. Overseas shipping is quoted as a door to door service. The shipping price does not include taxes(VAT) Termi
Z-Axis stage with Vexta Motor, Clean Damper & Avago Optical Encoder
Up for sale is a Z-Axis stage with Vexta Motor. Clean Damper& Avago Optical Encoder that came out of an Arcturus Autopix. It has been well taken care of(because it was in the machine for its entire existence) and works just like it should. Returns are only accepted if it is somehow faulty or doesn't work. Keep this in mind. If you have questions let me know. US Bidders Only and payment due within 24 hours of purchase or it will be relisted. Thank you. Bill.
Vexta Motor PK245M-01BA Dual Shaft Motor & Vexta Clean Damper D4CL-5.0 w/Shaft
Up for sale is a Vexta Motor PK245M-01BA Dual Shaft Motor& Vexta Clean Damper D4CL-5.0 w/ shaft that came out of an Arcturus Autopix. It has been well taken care of(because it was in the machine for its entire existence) and works just like it should. Returns are only accepted if it is somehow faulty or doesn't work. Keep this in mind. If you have questions let me know. US Bidders Only and payment due within 24 hours of purchase or it will be relisted. Thank you. Bill. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-148764f8e65-0x10a-
Damper Motor, Stepsaver, 115 Volts, Vintage
This 1930's damper motor was used for a furnace or heating system. When it is plugged in it moves in one direction. When the wires are touched together. It goes in the opposite direction. Motor has been tested and works. Plate reads: Stepsaver Damper Motor Model D 115 Volts* AC* 60 cycle 4* 6 Watts SEC 12V Patented US 2134685 2230612 2302742 1944699 2123182 Canadian 395771 40504 Crise Mfg. Co. Col. O. Measures 6" X 4" X 3 and 1/2" Wires have wear. With cracks. Please look at pictures carefully. There is some rust. Please ask questions before purchase. Thanks for looking!
HVAC Damper Motor 24V High Torque Gearmotor
This damper motor is used for moving the dampers on large HVAC ducts in buildings. They were removed during a remodeling project. They operate on the 24VAC from HVAC control systems. They have a high torque gear reduction and a spring return. So the control methodology is power on to turn shaft then power off to return. Internally it is a 24VDC motor with a diode to rectify the AC. Theoretically. The spring return and diode could be removed and the unit could operate like a DC gearmotor and be reversible.
Lennox 51H7401 Damper Door Motor For G20 or G17 Synchron
Description Up for sale is a burner door motor removed from a working gas furnace that was replaced. It is in good condition and has been tested. We will ship it out ASAP after cleared payment. Express shipping available for a additional fee. Thank you We gladly accept Paypal as our preferred payment method. Payment is due within two days after the item is purchased. All unpaid items will be handled through Ebay. If the item is picked up locally we can accept cash on delivery. Please note that if payment is made via Paypal e-check there will be a delay in shipment. It takes several days for e-check payments to process. Items will not be shipped until the payment is cleared. Orders will be processed ASAP. Normally the same day of cleared payment. Orders will be shipped through USPS, Fed Ex, or UPS and tracking information will be available ... moreimmediately. Overnight delivery is available at for an additional fee and should be arranged before purchase. Items can also be picked up in Cincinnati, Ohio 45251. Please contact us to make these arrangements. Free shipping is only for customers located within the United States. We do our best to ensure the accuracy of every listing. If you receive an item that is not as described in our listing. Please contact us directly via the Ebay message system and we work to correct the issue. We offer a(14) day money back guarantee on all items. Returned items must be shipped back at the buyers expense and received back in the same condition in which we sent them out. Purchases of HVAC items require a certified HVAC tech for proper install. We are not liable for damages or failures caused by improper installation. UnitedHvacParts has been conducting business on Ebay for several years and we have many satisfied customers. We do our best to take care of our customers and answer any questions in a timely manner. You may contact us via Ebay message system.
Multi Products UL18 3049 H.V.A.C. Control Shutter Wood Stove Damper Motor 110 V
Here is a green house shutter or wood stove damper control that I believe was made by Multi Products Co. Inc, Spec# UL18 3049. This H.V.A.C. control has been bench tested to work well on 110 volt, black& white wires though may be capable of other voltages. Check out my! Be sure to add me to your! I can always combine your shipping.
Vexta 5 Phase Stepping Motor PK564BUA W/ Clean Damper D6CL-6.3 #O5
Vexta 5 Phase Stepping Motor PK564BUA W/ Clean Damper D6CL-6.3 Made by Vexta. Model Number PK564BUA. Clean Damper Model Number D6CL-6.3. Items came to us from a company liquidation. For sale is the item pictured. No additional accessories included. Please read the following terms of sale carefully. These terms constitute a legally binding agreement( contract) between the seller and buyer. By bidding on. Or purchasing, the product posted in this eBay listing, the winning bidder agrees to and accepts all of the terms of sale stated below. TERMS OF SALE: Only what is shown in the eBay photo and mentioned in the listing is included. Anything else should be understood to not be included. For sale is for the eBay item only. No service or tech support are included, but if you have a question feel free to ask and we'll answer if we can. All sales ... moreare final. Please understand that this is an auction/liquidation environment, not a retail store, so make sure the item is right for you, before bidding. PAYMENT: We accept payment by Paypal. And we only ship to the address which the buyer provides within the Paypal payment, no exceptions. If you would like to pay with a non-Paypal payment method. Please contact us before bidding to see if we can arrange something. Buyers are given 7 days from winning bid to pay. And payment is expected of all winning bidders If no payment is made within 7 days. An unpaid item reminder will be filed with eBay, and the buyer forfeits the auction win. We are required by state law to collect sales tax on all items shipping to a CA address. CA sales tax may be waived at our discretion. But only with a valid CA resale certificate- please contact us for resale exception*before* sending payment. DOMESTIC(US) SHIPPING: Local pickup is normally not available; exceptions are sometimes made. But only for higher-value orders. Please contact us first to see if we can make this arrangement for you, don't assume that we will be able to. We charge flat-rate shipping. And there is no extra cost to ship t
FIELD,EFFIKAL VENT DAMPER MOTOR RVGP- KB, A.O.SMITH WATER HEATER
Good used effikal vent damper motor. Was removed from a functional A O.Smith water heater. Tank leak. 100 gallon unit with a 6" vent. I believe it will fit others. Thanks for looking. Please feel free to ask any questions.
Ruskin ABAR120 120 Volt Spring Return Damper Motor
This is a used Ruskin Damper Motor M# ABAR120. This item is in good working condition and was tested. Good luck bidding
HONEYWELL W899G 1034 24V-DC 5W 160 DEGREE STROKE ECONOMIZER DAMPER MOTOR B341336
Product Specifications. Brand: HONEYWELL, Condition: Used, Model: W899G 1034, Shipping Weight: 14 lbs, Shipping Dimensions: 11 x 10 x 8 in, SKU: B341336(SMM) Category: Miscellaneous, Additional Notes: 24V-DC 5W 160 DEGREE STROKE ECONOMIZER DAMPER MOTOR, Product Photos. $144 USD- We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship items within 1 Business Day of receiving cleared payments. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. We only offer Collect ... moreShipping via UPS. If the item is to be shipped via Freight. Please contact us for a shipping quote. You may also choose to have your shipment picked up by your carrier. We will palletize, strap and shrink-wrap your shipment. We offer a 7 day courtesy holding period for our clients, but shipments are subject to storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence as we put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer an amazing buying experience to all our customers. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. NRI is not responsible for technical spec
Honeywell M828c replaced by M836A1042 Damper Motor 24vac w/ Q254a switch
Recently taken from a working system These are so hard to fine they were replaced by the M836A1042 but the old ones are still the best on the market I have several of these but I assure you they wont last long Questions welcome Ready to wire up and work
T.A.C. TAC Dura Drive damper motor actuator MS41-6043 24vac 2 avail 35 in-lb
This lot is 1pc(2 available) T.A.C. Dura Drive actuator motor. Cat# MS41-6043, 24vac, 0-10vdc control, non spring return, used/tested,90degree. We have many more network 8000 components available, LCM GCM, VAV boxes, actuators, temp sensors. Any questions, please ask. Will ship at 3lbs. Thanks for looking.
Honeywell M7215A1008 Economizer Actuator Damper Motor Rooftop Unit
Preowned 3 months. Off corporate change out. works fine. Clean non smoking home I ship items Mon-Fri when payment is completed. Collectorofall Since 1997 Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Field Control-Gas Vent Damper Replacement Motor Assembly - Model:GVD-RMA
Field Control- Gas Vent Damper Replacement Motor Assembly-Model: GVD-RMA This listing is for an used Field Control Gas Vent Damper Replacement Motor Assembly Model: GVD-RMA with instructions. The GVD Motor Assembly is operated by 24 VAC only The Field Vent Damper works automatically to allow natural draft during appliance operation while preventing residual appliance heat and conditioned air from escaping during off cycles. It also prevents the infiltration of cold air during down drafts. Improves Gas Boiler Efficiency. Keeps Cold Air Out. Warm Air In. Product Specifications Brand: Field Controls Length: 6 inches Width: 6 inches Height: 6 inches Weight: 1 lbs Manufacturer's Part Number: GVD-RMA
MST Motor Switch Terminal trol a temp zone damper
in good working condition. Tested after removing from a upgrade system. SHIPPING 2 TO 4 BUSINESS DAYS All my stuff is pack and ready to go just print shipping label.
Tamagawa 2 Ph Step Motor Model TS3684N38 With Vexta Clean Damper D9CL-14F
Tested Working Tamagawa 2 Ph Step Motor Model TS3684N38 With Vexta Clean Damper D9CL-14F Tamagawa 2 Ph Step Motor Model TS3684N38 1.8 Deg/Step 1.38VDC Vexta Clean Damper D9CL-14F See Pictures For More Information Take A Moment And Visit Our Ebay Store Please Read Terms and Conditions USA Sales Only All auctions must be paid for with in 10 Days of end of auction. All items are SOLD AS-IS Unless otherwise stated in the auction. All end of auction notifications will be sent to your registered Ebay email address. We will combine shipping on auctions if possible. However we may not combine shipping on auctions sold by different CTR Surplus sellers. If for some reason an item has to be returned to CTR Surplus the Buyer will have to pay the return shipping. The original shipping charges are not refundable. All returns are subject to a 20 percent ... morerestocking fee. For any return you must email CTR Surplus with in 3 days of receipt of the item. Please ask all questions before placing a bid. Most items will be shipped UPS Ground and automatically insured for the bid amount. Any item that requires Truck Freight will require Buyers phone number and someone to unload the item from the truck(The Freight Company Will Not Unload The Truck) CTR Surplus 202 W. Livingston Ave Crestline Ohio 44827 Phone 419-683-3535 Fax 419-683-3230 All Auctions Will Be Automatically Insured For Final Bid Price Please click here to see my other auctions. 7.25% Sales Tax Will Be Charged On Item Price And Shipping On All Ohio Sales Powered by SixBit's eCommerce Solution
Leeds & Northrup Damper Actuator Motor 120V (10264-60)
Leeds& Northrup Damper Actuator Motor 120V(10264-60) Description- Model: 10264-60- Manufacturer: Leeds& Northrup- 120 VAC(107-127) 50/60 Hz(50-70) 10862(NRN) 1/29/2015. Shipping. Size and Weight: You are welcome to arrange your own shipping. All orders are shipped within 1 to 3 days prioritized from the date we receive payment. Not counting weekends and holidays. The USPS has a 70 lb weight limit with dimensional restrictions. UPS has a 150 lb weight limit with dimensional restrictions. International weight and size restrictions vary. We will ship your item to the most cost efficient way we can provide. We do allow local pickup at our facility in Fort Worth. Notice: Regardless of the carrier used. The receiver is responsible for thoroughly inspecting the shipment immediately upon receipt as well as noting any specific damage on the ... moredelivery receipt before signing. If no damage is noted on the delivery receipt at the time of delivery the receiver affirms that the item has been fully inspected, is undamaged and is as described in the listing. The Tool General will not accept the return for refund of any item/items that have undocumented damage. If a damage claim is filed after the delivery with no damage noted on the original receipt the liability will be reduced to 25% of the cargo value. This is a summary of Section 48 of the‘UPS Rate and Service Guide’ dated 2012. Questions: We strive to answer all messages within 24 hours. During the holidays there may be a longer response time. Also. Be sure to add us to your favorites list and to sign up for our to be updated about weekly new arrivals. Please feel free to with any questions. Comments or concerns. Click on the logo above to see our store! Powered by The free listing tool. List your items fast and easy and manage your active items.
Vexta 5-Phase Motor PK596-NBA (1.15v / 2.8A) w/Vexta Clean Damper, Driver, More
Up for sale is a Vexta 5-Phase Stepping Motor. Model PK596-NBA(1.15v/ 2.8A) w/Vexta Clean Damper, Driver, Cables and Bolts. Everything is in great cosmetic and functioning condition. If you have questions feel free to ask and payment due within 24 hours of purchase or it gets relisted. Thanks. Bill.
VEXTA PK564-NB-A13 5-Phase Stepping Motor, DC 1.4A, 0.72/Step + Clean Damper
Designation: 5-Phase Stepping Motor. DC 1.4A, 0.72/Step + Clean Damper※ Model: PK564-NB-A13※ Manufacturer: VEXTA/ Japan = Photos were taken in as much detail as possible. This equipment has been dismantled. System is not tested. If you have any questions. Please message. Terms and Conditions- Full payment must be made within 1 weeks after committed purchase. Otherwise unpaid item case will be opened* Buyer must agree to our shipping policies* Buyer must provide correct shipping information when checkout. Such as full address and contact details; if parcel was returned or lost due to incorrect address or unclaimed. Buyer takes full responsibility* In case of item broken/ faulty within its warranty period. Item must be sent back to us for repair/ replacement; refund will only be offered on special occasions* Buyer is responsible for return ... morepostage cost. Special occasions excepted* In case of any dispute. Me(our company) reserves the right of final explanation* By purchasing and of our items. Buyer have agreed to opt-in our member group and will receive newsletters via email; buyer may opt-out any time- Shipping Policies- Most orders will be dispatched via Expedited Int'I Shipping within 3 working days after payment clearance; special occasions excepted* In case of multiple purchase. Shipping costs will be combined for most items, except huge/ heavy ones* No pickup. To learn more about special occasions. Pleas contact us via eBay message- Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment Information- We accept: PayPal Only
THK KR20 Actuator Module - Coupling + DC Motor + Damper - Z axis, CNC, Engraver
For more automation accessories e.g. CCD Cameras. Linear actuators, lenses. Lasers, stepper and dc motors, scanning modules or stylus pl ease c heck out my! THK KR 20 150mm LINEAR ACTUATOR(there are also 200mm long in offer) Condition: Used.Very good. Pitch: 1mm. Rail length: 150mm Accuracy grade: Normal. Cage: Yes. Actuator is sold with: 1. Stepper Motor Lin Engineering 4118S-33D-05RO. Current: 3.2A. 2. Oldham flexible coupling 3. Damper from Oriental Motors Vexta Clean damper D4CL-5OF VX8. Shippment: Standard shippment via Postal services. Courier shippment UPS/DPD cost varies on buyers locations. Please send a request if You wish to order a courier. If You wish an invoice please write your company details including tax id