|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: Used Location: Saint Paul, United States DOTCO 15L2789-82 RIGHT ANGLE DRILL, 6,200 RPM. 1/4-28 INTERNAL THREAD.... Condition is Used. This tool is good working condition, it works perfect as ... moreit should. Fully testedShipped with USPS Priority Mail.
Buy It Now
$12.54 Shipping Condition: Used Location: San Antonio, United States Exhaust: rear, Free Speed: 20.000 RPM, Abrasives capacity: 1/2" carbide burr. 1" mounted wheel, Housing type: composite, Weight: 1.1 lbs. Head ... moreheight: 2.7" Length: 6.6" Air inlet size: 1/4" Made in USA,
Buy It Now
$8.00 Shipping Condition: Used Location: Westerville, United States For sale is a used Dotco Pneumatic right angle die grinder. 20,000 Rpm. The model number is 10L1201 G36. The grinder is in good working condition and ... moreready to use. These are military surplus tools and may have markings on them as shown.
Buy It Now
$10.00 Shipping Condition: Used Location: Saint Paul, United States DOTCO 15L2789-32 RIGHT ANGLE DRILL, 6,200 RPM. 1/4-28 INTERNAL THREAD.. Condition is Used. This tool is good working condition, it works perfect as it ... moreshould. Fully tested Shipped with USPS Priority Mail.
Buy It Now
$6.82 Shipping Condition: Used Location: Houston, United States Dotco 12LF Series Right Angle Grinders – 300 Series Collet.
Buy It Now
$12.99 Shipping Condition: Used Location: Dallas, United States Dotco 12LF280-36 right angle grinder 12000RPM 1/4” Collet Aircraft ToolsThis tool is used , but it is working perfectly It runs very smoothlyCome exactly ... moreas picturesHappy biddingThank you
Buy It Now
$11.40 Shipping Condition: New – Open box Location: Wichita, United States AO4056798 4A4. Up for sale is a preowned Dotco 10LF280-36 Right Angle Grinder 12,000 RPM, 0.4 HP, 1/4" Collet! Tool is in excellent condition with minimal ... morewear - it does not appear to have been used.
Buy It Now
$20.00 Shipping Condition: Used Location: Kent, United States TESTED GOOD. FAST SHIPPING.
Buy It Now
$12.99 Shipping Condition: Used Location: Dallas, United States Dotco 15LN286-62 right angle Drill 770RPM 1/4-28 Threaded Aircraft ToolsThis tool is used , but it is working perfectly It runs very smoothlyCome exactly ... moreas picturesHappy biddingThank you
Buy It Now
Free Shipping Condition: Used Location: Yorktown, United States Dotco right angle drill / die grinder. 1/4" drill chuck. 12,000rpm.
Buy It Now
Free Shipping Condition: Used Location: Claremore, United States
Buy It Now
$8.00 Shipping Condition: Used Location: Westerville, United States For sale is a used Dotco right angle die grinder. The model number is 10K1280 36. The grinder is in good working condition and ready to use. These are ... moremilitary surplus tools and may have markings on them as shown.
Buy It Now
Free Shipping Condition: Used Location: Saint Paul, United States 12LF Series– 0.4 hp(0.29 kW) 300 Series Collet Specifications: Exhaust: rear, Free Speed: 20.000 RPM, Abrasives capacity: 1/2" carbide burr. 1" ... moremounted wheel, Housing type: composite, Weight: 1.1 lbs. Head height: 2.7" Length: 6.6" Collet size: 1/4" Air inlet size: 1/4" Made in USA,
Buy It Now
$18.40 Shipping Condition: New – Open box Location: Prescott, United States Appears to be unused in box with instructions and accessories. It does have grinder marks on the body. Listing does not include a blade. Please review ... morepictures for item condition.
Buy It Now
$15.47 Shipping Condition: Used Location: Coffeyville, United States 10L1201B 36. PNEUMATIC RIGHT-ANGLE DIE GRINDER. WEIGHT; 2 LBS. OAD: 7" X 5 5/8" X 2". 1/4" QUICK CONNECT.
Buy It Now
$11.97 Shipping Condition: Used Location: Greenacres, United States This Dotco Air Right Angle Die Grinder is a top-quality tool that boasts an impressive 20,000 RPM. Made in the United States, it is built to last and ... moreis perfect for anyone in need of a reliable and efficient pneumatic grinder. The 10L1201B model is specifically designed for light equipment and tools, making it perfect for a variety of industrial applications.Featuring a brand name that is well-respected in the industry, this Dotco grinder is sure to exceed your expectations. Its rugged construction and high-speed performance make it an excellent choice for anyone in need of a powerful and reliable pneumatic tool. Whether you are a professional contractor or a DIY enthusiast, this grinder is sure to make your job easier and more efficient.
Buy It Now
Free Shipping Condition: Used Location: Vincennes, United States Dotco 12LF281-36 Die Right Angle Grinder 20,000 RPM. 1/4" collet - Tested Working - condition as pictured
Buy It Now
$10.00 Shipping Condition: Used Location: Saint Paul, United States 12LF Series– 0.4 hp(0.29 kW) 300 Series Collet Specifications: Exhaust: rear, Free Speed: 20.000 RPM, Abrasives capacity: 1/2" carbide burr. 1" ... moremounted wheel, Housing type: composite, Weight: 1.1 lbs. Head height: 2.7" Length: 6.6" Collet size: 1/4" Air inlet size: 1/4" Made in USA,
Buy It Now
$9.99 Shipping Condition: New Location: Monroe, United States Dotco Air Die Grinder Model 12LF281-36 New Free Shipping USPS Priority Mail
Buy It Now
Free Shipping Condition: Used Location: Vincennes, United States Dotco 12LF281-36 Die Right Angle Grinder 20,000 RPM. 1/4" collet - Tested Working - note the attachment condition - condition as pictured
Buy It Now
$9.99 Shipping Condition: Used Location: Saint Paul, United States Dotco Right Angle Die Grinder 10LF201-36 Air Sander 1/4 Collet 20000 Rpm. This is a used angle grinder in great working condition. It has a set of brand ... morenew blad on it and works like new. It shows marks and scuffs from previous use, refer to photos for best detail, also including a brand new backing pad and some abrasives. Ships via USPS PRIORITY MAIL.
Buy It Now
Free Shipping Condition: New – Open box Location: Saint Paul, United States Dotco angle grinder Lot of 2 Dotco. Die grinder unline is 25,000 RPM,and Right Angle is 30,000 RPM, Condition is " "New Open Box, Brand new with its original ... morebox and wrenches. it works perfect as it should. Fully tested.Shipped with USPS priority mail.
Buy It Now
$8.00 Shipping Condition: Used Location: Westerville, United States For sale is a used Dotco right angle die grinder. 20,000 Rpm. The model number is 10L1200 G36. The grinder is in good working condition and ready to use. ... moreThese are military surplus tools and may have markings on them as shown.
Buy It Now
$10.00 Shipping Condition: Used Location: Saint Paul, United States Dotco 12LF280-36 Right Angle Grinder 12,000 RPM. 1/4" collet. Condition is USED. This tool is used like new and it has only been lightly used , it works ... moreperfect as it should. Fully tested. Shipped with USPS Priority Mail Rate Box.
Buy It Now
$10.00 Shipping Condition: Used Location: Saint Paul, United States DOTCO 15LN288-62 RIGHT ANGLE DRILL, 6,000 RPM. 1/4"-28 INTERNAL THREAD. Condition is "Used".This tool is good working condition, fully tested. Shipped ... morewith USPS Priority Mail.
Buy It Now
$18.40 Shipping Condition: Used Location: Auburn, United States Listing includes: Dotco(10l1201b-36) 90 Degree Angle Air Die Grinder. 20.000 RPM. Item has been tested. No mechanical issues to note. Cosmetic blemishes: ... moreminor signs of use No replacement parts needed. Item is free of any major/excessive/abnormal blemishes. Item comes as shown in photos. Please see them for details. If you have any questions please feel free to ask. Thank you and happy bidding! 384922-1 AO
Buy It Now
$10.00 Shipping Condition: Used Location: Saint Paul, United States Dotco 10LF281-36 Right Angle Grinder 20,000 RPM. 1/4" collet. Condition is USED. This tool is good working condition, it works perfect as it should. Fully ... moretested Shipped with USPS Priority Mail Rate Box.
Buy It Now
$13.00 Shipping Condition: Used Location: Coffeyville, United States DOTCO PNEUMATIC RIGHT-ANGLE DIE GRINDER. 1/2" COLLET. 12,000 RPM MAX.
Buy It Now
$18.00 Shipping Condition: Used Location: Milton Freewater, United States This Drill is in good working condition.
Buy It Now
$10.00 Shipping Condition: Used Location: Saint Paul, United States DOTCO 15LN284-52 RIGHT ANGLE DRILL, 1,070 RPM. 1/4"-28 INTERNAL THREAD. Condition is "Used".This tool is used like new and it has only been lightly used ... more, it works perfect as it should. Fully tested. Shipped with USPS Priority Mail.
Buy It Now
$10.00 Shipping Condition: Used Location: Saint Paul, United States DOTCO 15LN288-62 RIGHT ANGLE DRILL, 5,600 RPM. 1/4"-28 INTERNAL THREAD. Condition is "Used".This tool is good working condition, fully tested. Shipped ... morewith USPS Priority Mail.
Buy It Now
Free Shipping Condition: New Location: United States Die Grinder, Duty Heavy Duty, Horsepower 0.4 hp, Collet Size 1/4 in, Grinder Orientation Right Angle, Air Inlet Connection Size 1/4 in, Air Inlet Gender ... moreFemale, Max. Speed 20,000 RPM, Air Inlet Type NPT, Air Inlet 1/4 in NPT Female, Tool Style Right Angle, Kit Contents (1) Bare Tool, Includes Collet Wrenches, Anti-Kickback Clutch Type None, Power Source Air Powered.
Buy It Now
Free Shipping Condition: New Location: Long Beach, United States DOTCO REAR BEARING PLATE #4168. Made in USA. 12S4216-01 RIGHT ANGLE SAW. 12S4217-01 RIGHT ANGLE SAW. 12S4218-01 RIGHT ANGLE SAW.
Buy It Now
$8.10 Shipping Condition: New Location: Long Beach, United States DOTCO BALL BEARING #535 STEYR 6300Z IN. Eleven (11). 12S4218-01 RIGHT ANGLE SAW. 12S4217-01 RIGHT ANGLE SAW. 12S4216-01 RIGHT ANGLE SAW.
Buy It Now
Free Shipping Condition: New – Open box Location: Bennington, United States I picked up a lot of spare parts for the Dotco 10-27 series right angle saw they include the 10K2747, 10K2748 and the 10K2749 and maybe others???. I'm ... morenot expert on many things and cannot describe every detail, so look closely at pictures.
Buy It Now
$15.35 Shipping Condition: Used Location: Clermont, United States Nice close quarters 90 degree head air drill for screw shank aircraft drill bits. video here ASK for full res photos, video of operational testing, etc. ... morephotos may have distortion, are for general scale only.
Buy It Now
Free Shipping Condition: New Location: Long Beach, United States DOTCO GOVERNOR NOZZLEs #3262. Made in USA. 12S4217-01 RIGHT ANGLE SAW. 12S4216-01 RIGHT ANGLE SAW. 12L4203-80 7" AND 9" SANDER.
Buy It Now
$8.10 Shipping Condition: New Location: Long Beach, United States Made in JAPAN. 12S4217-01 RIGHT ANGLE SAW. 12S4216-01 RIGHT ANGLE SAW.
Buy It Now
Free Shipping Condition: New Location: Thousand Oaks, United States Dotco 12-22 Series Right Angle Sander with 300 Series Collet. Collet Size: 1/4". Free Speed: 12,000. Exhaust: Rear. Weight: 2.20lbs / 1.00kg.
Buy It Now
$10.00 Shipping Condition: Used Location: Saint Paul, United States Dotco angle grinder Lot of 2 Dotco. Die grinder unline is 25,000 RPM,and Right Angle is 12,000 RPM, Condition, Used. This tool is good working condition, ... moreit works perfect as it should. Fully tested. Shipped with USPS priority mail.
Buy It Now
$18.00 Shipping Condition: Used Location: Austin, United States Dotco right angle grinder sander 10L27510 9000RPM WORKING
Buy It Now
Free Shipping Condition: New Location: Long Beach, United States 10 DOTCO SCREWS # 14-2571. 1/2" X 20TPI,1/4" HEX. Made in USA. 10K2748-01 RIGHT ANGLE SAW. 10K2747-01 RIGHT ANGLE SAW. 12S4218-01 RIGHT ANGLE SAW.
Buy It Now
Free Shipping Condition: New – Open box Location: Bennington, United States I picked up a lot of spare parts for the Dotco 10-27 series right angle saw they include the 10K2747, 10K2748 and the 10K2749 and maybe others???. I'm ... morenot expert on many things and cannot describe every detail, so look closely at pictures.
Buy It Now
$10.80 Shipping Condition: Used Location: Wichita, United States For sale is a used Dotco USA 10L1200B 1/4" Collet Die Grinder Right Angle 12,000 RPM. This tool is well used but in good condition. See pictures for condition. ... moreNo international orders.
Buy It Now
$20.00 Shipping Condition: Used Location: Fort Worth, United States This Dotco 10L1200B die grinder is a reliable tool for your grinding needs. With a 1/4\" collet, it is perfect for various applications and can reach ... moreup to 12,000 RPM. It has been tested and is in good working condition. Made in the United States, you can trust its quality and durability.
Buy It Now
$8.00 Shipping Condition: New Location: Farmingdale, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Bennington, United States I picked up a lot of spare parts for the Dotco 10-27 series right angle saw they include the 10K2747, 10K2748 and the 10K2749 and maybe others???. I'm ... morenot expert on many things and cannot describe every detail, so look closely at pictures.
Buy It Now
Free Shipping Condition: New – Open box Location: Bennington, United States I picked up a lot of spare parts for the Dotco 10-27 series right angle saw they include the 10K2747, 10K2748 and the 10K2749 and maybe others???. I'm ... morenot expert on many things and cannot describe every detail, so look closely at pictures.
Buy It Now
Free Shipping Condition: New – Open box Location: Bennington, United States I picked up a lot of spare parts for the Dotco 10-27 series right angle saw they include the 10K2747, 10K2748 and the 10K2749 and maybe others???. I'm ... morenot expert on many things and cannot describe every detail, so look closely at pictures.
Buy It Now
Free Shipping Condition: New Location: Long Beach, United States DOTCO SPACER # 2237 EIGHT (8) and 2242 (2). Made in USA. 12S4216-01 RIGHT ANGLE SAW.
Buy It Now
$6.05 Shipping Condition: New Location: Manchester, United States Fits 9 Models 12L1200-36 Inline Grinder. 12S1203-36 Inline Grinder. 12S1200-36 Inline Grinder. 12L1201-36 Inline Grinder. 12L1201-32 Right Angle Grinder ... more/ Sander.
Buy It Now
Free Shipping Condition: New Location: Long Beach, United States Made in USA. 12S4216-01 RIGHT ANGLE SAW.
Buy It Now
Free Shipping Condition: New – Open box Location: Bennington, United States I picked up a lot of spare parts for the Dotco 10-27 series right angle saw they include the 10K2747, 10K2748 and the 10K2749 and maybe others???. I'm ... morenot expert on many things and cannot describe every detail, so look closely at pictures.
Buy It Now
$18.00 Shipping Condition: Used Location: Austin, United States
Buy It Now
Free Shipping Condition: New Location: Long Beach, United States DOTCO BEARING PLATE 1-7/8" outside dia. ---1-3/8" inside dia. 1/2" hole. Made in USA. 12S4217-01 RIGHT ANGLE SAW. 12S4216-01 RIGHT ANGLE SAW. 12L4203-80 ... more7" AND 9" SANDER.
Buy It Now
Free Shipping Condition: New Location: Long Beach, United States DOTCO SCREW # 14-2571 AND (2) SPACERS #14-2575. Made in USA. 10K2748-01 RIGHT ANGLE SAW. 10K2747-01 RIGHT ANGLE SAW. 12S4218-01 RIGHT ANGLE SAW.
Buy It Now
Free Shipping Condition: New – Open box Location: Bennington, United States I picked up a lot of spare parts for the Dotco 10-27 series right angle saw they include the 10K2747, 10K2748 and the 10K2749 and maybe others???. I'm ... morenot expert on many things and cannot describe every detail, so look closely at pictures.
Buy It Now
Free Shipping Condition: New – Open box Location: Bennington, United States I picked up a lot of spare parts for the Dotco 10-27 series right angle saw they include the 10K2747, 10K2748 and the 10K2749 and maybe others???. Make ... moresure it will work for your application.
Buy It Now
Free Shipping Condition: New – Open box Location: Bennington, United States I picked up a lot of spare parts for the Dotco 10-27 series right angle saw they include the 10K2747, 10K2748 and the 10K2749 and maybe others???. I'm ... morenot expert on many things and cannot describe every detail, so look closely at pictures.
Buy It Now
Free Shipping Condition: New – Open box Location: Bennington, United States I picked up a lot of spare parts for the Dotco 10-27 series right angle saw they include the 10K2747, 10K2748 and the 10K2749 and maybe others???. I'm ... morenot expert on many things and cannot describe every detail, so look closely at pictures.
|
|
|
|
DOTCO 12LF280-36 12,000rpm Pneumatic Air Die Grinder, Right Angle
YOU ARE BIDDING ON A LIGHTLY USED DOTCO RIGHT ANGLE GRINDER IN NEAR MINT CONDITION. PLEASE EMAIL QUESTIONS PRIOR TO BIDDING. PAYMENT IS DUE WITHIN 4 DAYS AFTER THE AUCTION ENDS UNLESS YOU ARE A NEW EBAYER WITH 5 OR LESS FEEDBACKS IN WHICH CASE PAYMENT IS DUE IMMEDIATELY AFTER THE AUCTION ENDS.
|
|
|
Dotco Right Angle Grinder | 12L2718-36 | 18,000 RPM | 1/4" Collet
Dotco Right Angle Grinder | 12L2718-36 | 18.000 RPM | 1/4" Collet Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Make: Dotco Model: 12L2718-36 Condition: Used/Lightly Used- This item has been used but is still in decent condition. This item will be working mechanically(if applicable) but can have some signs of wear to the exterior(Ex. Light scratches. Scuffs or marks) Auction includes: Tool only Guarantee: 30 Day satisfaction guarantee 279651.1 564 KM Order: 17783 We are only able to accept PayPal payments it's secure and offers the most protection to buyers and sellers alike. PayPal also gives you the flexibility to pay with your checking account. Debit, or credit cards. Payment is expected within 8 days. Sales tax must be collected for all Texas. Tennessee, Illinois, Washington, ... moreNevada, and Florida buyers. We are unable to accept orders from resellers. We can only ship to addresses in the contiguous US(48 states) This item will be shipped via UPS ground. Shipments will only be made to confirmed PayPal addresses. Our goal is to ship within 24 hours of PayPal receipt of payment. And we guarantee it will leave our store within 2 business days. Insurance and delivery confirmation is included for all items and is calculated into the shipping charge. Shipping time with UPS ground is generally 2-6 business days, we will email the tracking information when shipment is made. Expedited shipping is available for additional costs at the buyer's expense, so please email any special requests, and we'll try to get you a quote within 24 hours. We currently ship from multiple locations in the states of Texas, Tennessee, Illinois, Washington, Nevada, and Florida. We can sometimes combine shipping and reduce the rate if you win items from the same location. Please see the three to four digit store identifier at the bottom of the description, and email prior to auction end for a quote on reduced shipping. We will do the best to accurately describe the item in
|
|
|
Dotco 0.3HP Pneumatic High Speed Right Angle Grinder 10L1200
Dotco 0.3HP Pneumatic High Speed Right Angle Grinder 10L1200 Description- Model: 10L1200-36- Manufacturer: Dotco- Free Speed: 12.000 RPM- Output: 0.3 HP- Abrasive Capacity: 1/2" Carbide Bur. 1" Mtd. wheel- Overall Length: 6.3" Air Inlet: 1/4" Front Exhaust- Uses 300 series collet- Superb for a wide range of finishing and deburring- Very lightweight and easy to use. Tested and works good. May have some cosmetic markings/engravings. 6479( JK)10/2/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have ... moretime: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting w
|
|
|
Dotco 10L1200B-36 12,000 RPM right angle die grinder, front exhaust .3 hp
Dotco 10L1200B-36 12.000 RPM right angle die grinder, front exhaust.3 hp This is a used in good working condition right angle grinder. Please see all photos for the actual item you will receive. Dotco 10L1200B-36 right angle grinder is superb for a wide range of finishing and deburring applications. Hp=.3(22kw) Front exhaust, 12,000 RPM Abrasive capacity=1/2" Carbide Bur, 1" Mtd. wheel. Weight=1.1lb, OAL=6.3" 1/4" air inlet, uses 300 series collet=1/4" composite housing. Standard equipment: applicable collet,collet wrench, PN 10L1200-36 made in Ohio USA.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13e757f14a5-0x101-
|
|
|
Dotco 10L1200-36 12,000 RPM right angle die grinder, front exhaust .3 hp
Dotco 10L1200-36 12.000 RPM right angle die grinder, front exhaust.3 hp This is a used in good working condition right angle grinder. Please see all photos for the actual item you will receive. Dotco 10L1200-36 right angle grinder is superb for a wide range of finishing and deburring applications. Hp=.3(22kw) Front exhaust, 12,000 RPM Abrasive capacity=1/2" Carbide Bur, 1" Mtd. wheel. Weight=1.1lb, OAL=6.3" 1/4" air inlet, uses 300 series collet=1/4" composite housing. Standard equipment: applicable collet,collet wrench, PN 10L1200-36 made in Ohio USA
|
|
|
Dotco Right Angle Grinder ~ Model 10l2273 36 - sn 370354 (14500 RPM Max) ~AS IS~
Dotco Right Angle Grinder ~ Model 10l2273 36- sn 370354(14500 RPM Max) ~AS IS~ I have for sale a Dotco Right Angle Grinder ~ Model 10l2273 36- sn 370354(14500 RPM Max) ~AS IS~. It is in used condition and has general use wear to it(scratches. Dings, and nicks) Probably does need to be oiled. The reason it is being sold AS IS, is due to the head not spinning when plugged into air. I took it apart and the lower half spins fine, its just the top half. Not sure why, maybe needs a new shaft inside. If you have any questions feel free to ask. Thanks for looking and happy bidding! PLEASE READ BEFORE BIDDING: We are committed to the satisfaction of your purchase. If you are not satisfied in any way please give us an opportunity to make it right before leaving feedback. We want positive feedback and five stars. And we always leave positive feedback ... morefor our customers! BIDDING POLICY: We reserve the right to remove bids placed by those with low feedback. Negative feedback, or unfavorable bidding practices. PAYMENT POLICY: If we do not receive payment within 4 days of your winning the auction. A case will be opened. If we do not receive a payment after 4 more days, the case will be closed and the item will be relisted. We prefer Paypal, but we also do local pickup. Please contact us if you would like to pay other than listed. SHIPPING POLICY: WE ONLY SHIP TO PAYPAL CONFIRMED ADDRESSES. IF YOUR TOTAL PAYMENT OF ALL ITEM(S) IS OVER $200. WE SHIP ONLY VIA DELIVERY SERVICES THAT GENERATE A TRACKING NUMBER AND REQUIRE A SIGNATURE CONFIRMATION UPON DELIVERY. IF THE ITEM IS LESS THAN $200, WE WILL SHIP WITH A TRACKING NUMBER. SHIPPING INFORMATION: We do combine shipping. Please notify us you are bidding on another item before paying and we will send you an invoice after all auctions are done. We only ship to the CONTINENTAL USA. NO EXCEPTIONS! EMAIL COMMUNICATION: Please use EBAY's mail message system to notify us. We DO NOT check or answer messages from our email address due to scammers trying to hack our account. LO
|
|
|
Dotco Right Angle Grinder ~ Model 10l1200B 36 SN N94015 (12000 RPM MAX)
Dotco Right Angle Grinder ~ Model 10l1200B 36 SN N94015(12000 RPM MAX) I have for sale a Dotco Right Angle Grinder ~ Model 10l1200B 36 SN N94015(12000 RPM MAX) It is in used condition and has general use wear to it(scratches. Dings, and nicks) Does need to be oiled and tightened up, but works GREAT! If you have any questions feel free to ask. Thanks for looking and happy bidding! PLEASE READ BEFORE BIDDING: We are committed to the satisfaction of your purchase. If you are not satisfied in any way please give us an opportunity to make it right before leaving feedback. We want positive feedback and five stars. And we always leave positive feedback for our customers! BIDDING POLICY: We reserve the right to remove bids placed by those with low feedback. Negative feedback, or unfavorable bidding practices. PAYMENT POLICY: If we do not receive ... morepayment within 4 days of your winning the auction. A case will be opened. If we do not receive a payment after 4 more days, the case will be closed and the item will be relisted. We prefer Paypal, but we also do local pickup. Please contact us if you would like to pay other than listed. SHIPPING POLICY: WE ONLY SHIP TO PAYPAL CONFIRMED ADDRESSES. IF YOUR TOTAL PAYMENT OF ALL ITEM(S) IS OVER $200. WE SHIP ONLY VIA DELIVERY SERVICES THAT GENERATE A TRACKING NUMBER AND REQUIRE A SIGNATURE CONFIRMATION UPON DELIVERY. IF THE ITEM IS LESS THAN $200, WE WILL SHIP WITH A TRACKING NUMBER. SHIPPING INFORMATION: We do combine shipping. Please notify us you are bidding on another item before paying and we will send you an invoice after all auctions are done. We only ship to the CONTINENTAL USA. NO EXCEPTIONS! EMAIL COMMUNICATION: Please use EBAY's mail message system to notify us. We DO NOT check or answer messages from our email address due to scammers trying to hack our account. LOCAL PICKUP: We do not prefer local pick up. But we can do it. There is a small handling charge for each item picked up. In addition we also have to charge sales tax of 7.350% NO EXCEPTIONS. Thank
|
|
|
EXC DOTCO 12000 RPM RIGHT ANGLE GRINDER MDL 10L1200B 36 WITH A 1/4" COLLET CHUCK
Up for sale is this nice clean working Dotco brand angle grinder. This shows very little use and is ready to be used. The chuck on this accepts 1/4" diameter shafts. Email with any questions
|
|
|
Dotco 12,000 RPM Pneumatic High Speed Right Angle Grinder 10-1200
Dotco 12.000 RPM Pneumatic High Speed Right Angle Grinder 10-1200 Description- Model: 10-1200- Manufacturer: Dotco- Free Speed: 12.000 RPM- Output: 0.3 HP- Abrasive Capacity: 1/2" Carbide Bur. 1" Mtd. wheel- Overall Length: 6.3" Air Inlet: 1/4" Front Exhaust- Uses 300 series collet- Superb for a wide range of finishing and deburring- Very lightweight and easy to use. Tested and works good. May have some cosmetic markings/engravings. 7610( JK) General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: ... moreContact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We cant fix it if we dont know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. Powered by;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1401217a393-0x106-
|
|
|
DOTCO right angle die grinder with keys - 90 degree - 20000 rpm
Dotco 10L120 1B 36 Right Angle Air Die Grinder. 20000 RPM. Dotco Die Grinder, keys, and cutting wheel included. This item is in good used condition with no major defects. Employee name and number have been removed. Payment by Paypal and shipping to the USA only.
|
|
|
DOTCO 12S1281-360H RIGHT ANGLE 20,000 RPM Aviation AIR GRINDER
HELLO I AM SELLING A COOPER TOOLS/ DOTCO RIGHT ANGLE GIRNDER 20000 RPM. MODEL# 12S1281-360H 80PSI/ 6.1 BAR MAX ANY QUESTIONS PLEASE ASK LOOKS AND WORKS FINE!
|
|
|
COOPER DOTCO RIGHT ANGLE DIE GRINDER 90 12L1280-36 AIRCRAFT AVIATION TOOL
COOPER POWER TOOLS DOTCO M/N 12L1280-36 12000 RPM 90 PSIG/6.1 BAR MAX RIGHT ANGLE DIE GRINDER LOOKS TO BE IN GOOD PHYSICAL CONDITION JUST SOME SLIGHT SURFACE RUST AS SHOWN IN PICS. UNIT IS BEING SOLD UNTESTED AND AS ALL OF OUR AUCTIONS IT IS BEING SOLD AS IS AND ALL SALES ARE FINAL. Disclaimer- ALL ITEMS NEW OR USED ARE SOLD AS IS AND ALL SALES ARE FINAL. QUESTIONS? PLEASE CALL 210-566-3300 or text us at 210-273-3394
|
|
|
Dotco 10K1200 Right Angle Grinder/Sander Pnematic Air Tool 12,000 RPM
Dotco Right Angle Grinder/Sander Pnematic Air Tool 12.000 RPM Model 10K1200 Good. Used condition. Previous owner scratched their name on it. Couple scratches. This is extent of damage. Please see photos for better idea of condition. Handle all concerns prior to purchase as all sales are final. Posted with
|
|
|
Cooper Tools Dotco Pneumatic Right Angle Die Grinder, 12L1280-36 Air Grinder
For sale in this Listing is a Cooper Tools Dotco Pneumatic Right Angle Die Grinder. 12L1280-36. Tested and fully functional. Good used condition. No personal engravings. Shows normal signs of wear from use not abuse. No retail packaging or owners manual. Item pictured is exact item winning bidder will receive. 12000 RPM 90 PSIG/6.1 BAR MAX We usually ship items within 1 business days after auction has been paid for. This Auction ships to lower 48 U.S. residents only. We will pay return shipping if the reason for the return was from an error in the listing that was the seller's mistake or if we ship the wrong item. If the return is for a reason other than a mistake by the seller. Then the buyer will be refunded the price of the item but not the original shipping charges and not the return shipping costs. If an item has free shipping either ... moreas a'Buy it Now' or'Auction' listing and it is returned buyer will be refunded original amount less our original shipping costs. If the error is our fault we will gladly cover all costs. Original and return. We over pack all items with packing material to ensure safe shipping. We sell hundreds of items and do our very best to describe items as accurately as possible. Please feel free to contact us with any questions.
|
|
|
Dotco 10L1200G36 12,000 RPM right angle die grinder with extras
nice. Used tool here. Runs very strong. I am including a new Merritt insert and disc as well as tools. Tool has scratches, stains and writing on it, but no abuse at all. Thanks 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-141c36809df-0xf8-
|
|
|
DOTCO 90 DEGREE RIGHT ANGLE AIR DIE GRINDER #10L1200B, 12,000 RPM, + EXTRAS
TO ARNDTINC! WE ARE SELLERS WHO HAVE STARTED ANOTHER USERNAME TO SELL PARTICULAR ITEMS. OUR OTHER USERNAMES ARE"SKYNON" 1TO4" WE HAVE A COMBINED TOTAL OF OVER 30.000 POSITIVE FEEDBACKS, SO PLEASE BID ON OUR ITEMS WITH CONFIDENCE! THIS IS A PREVIOUSLY USED AIR TOOL BY DOTCO No. 10L1200B 1/4" AIR DIE GRINDER 90 DEGREE HEAD 12.000 RPM +(2) EXTRA DIE GRINDERS AS A BONUS: NO NAME 1/4" DIE GRINDER& CAMPBELL HAUSFELD DIE GRINDER(MISSING COLLET) COMES JUST AS PICTURED WORKS GREAT! NO RESERVE! WE WILL HAVE SEVERAL AUCTIONS RUNNING WITH QUALITY NAME BRAND TOOLS FOR THE NEXT SEVERAL MONTHS. SO PLEASE CHECK THEM OUT! WE WILL SHIP WORLDWIDE.
|
|
|
Cooper Tools DotCo Ergo 12L1281-36 Right Angle Grinder and Sander
Cooper Tools DotCo Ergo 12L1281-36 Right Angle Grinder and Sander Model 12L1281-36 0.3 hp motor 20.000 rpm Rear exhaust Nearly new Cooper Tools DotCo Ergo Right Angle Grinder and Sander. It is 6 ¼ inches long. I don’t think it has ever been used. The grease tube has not been opened. There are two holders and two wrenches. Also included is the unopened tube of grease and the grease tube adapter. The original instructions are also included. I did some quick searching on-line and found that this model(12L1281-36) was replaced by model 12LF281-36. The new model sells for more than $600.00. So this item is a true value buy. It’s a great looking piece. Please take a good look at the pictures and you be the judge. I try to point out the downside the best I can. However I may miss something. If you are unsure what you’re bidding on please ask ... morequestions. Shipping to lower 48 USA. I combine shipping. Comments& Questions. Please Read! If there is a problem, regardless of type, e-mail me and I will try and resolve it with you. I do my best to describe each item accurately and my feedback indicates I usually succeed. You will always be bidding on the actual item shown in my pictures. Look at the pictures, and read the description. You are bidding on exactly what you see in the pictures. Again, take a good look at all the pictures(they describe the lot better than my words can) to see exactly what you are bidding on and judge the condition of the item for yourself. Please feel free to e-mail me if you have any questions on this item especially as it relates to its condition. Please ask now, not after you have won the item! Bidders Please Note the following: Payment via PayPal… Payment must be received within 5 days
|
|
|
Dotco 10L1201B-36 Right Angle Die Grinder
This is a used Dotco right angle die grinder. Great tool. This tool has been serviced and reconditioned by Portable Tool Service. Inc. 20.000 RPM max. 1/4" Collet(included) Front exhaust MADE IN THE USA-Hicksville Ohio.
|
|
|
DOTCO 12LF281-36 Pneumatic Right Angle Air Die Grinder Sander 20,000 RPM
Exhaust: rear, Free Speed: 20.000 RPM, Abrasives capacity: 1/2" carbide burr. 1" mounted wheel, Housing type: composite, Weight: 1.1 lbs. Head height: 2.7" Length: 6.6" Air inlet size: 1/4" Made in USA,
|
|
|
Dotco 12LF280-36 Pneumatic Air Die Right Angle Grinder w/ DMC dust shroud !
Up for auctions is a Dotco#12LF280-36 90Degree grinder with a DMC Clean Air dust Shroud. Also comes with a Dynaswivel air inlet. Tool is very strong and runs very smoothly. I am including a small wrench as well. Tool is used with some minor stains and scratches and surface rust from sitting in storage. Nice tool all the way. Small cosmetic stuff.no abuse. Thanks
|
|
|
Dotco right angle grinder Model Number 12L1281-36 1/4" Collet .3HP
Model Number 12L1281-36 1/4" Collet.3HP Ergonomic 20.000 RPM Rear Exhaust. Used tool but works perfect. Not even a year only.
|
|
|
Dotco Right Angle Die Grinder 10L1201-36
Up for sale today is a Dotco Right Angle Die Grinder. 100% working order Shows signs of use. But still a work horse. Comes with everything shown in picture Please view all pictures. And ask any questions before bidding/purchasing. Thank You NO RETURNS/REFUNDS! If you have a feedback score of 5 or less. Or are new to eBay, please contact us before buying any of our items. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO CONTACT US THROUGH: eBay MESSAGES ONLY! NO INT ERN ATI ON AL SHI PPI NG! We only ship to the continental 48 states. ALL PAYMENTS MUST BE COMPLETED WITHIN 3 DAYS OF PURCHASE. ANY ITEMS LEFT UNPAID WITHOUT COMMUNICATION WILL BE RE-LISTED ON THE 4TH DAY* FEEDBACK PLEASE LEAVE POSITIVE FEEDBACK FOR US AFTER YOU RECEIVE YOUR PURCHASE. IF FOR ANY REASON YOU ARE UNHAPPY WITH YOUR PURCHASE PLEASE CONTACT US IMMEDIATELY SO WE MAY RESOLVE ... moreTHE ISSUE BEFORE YOU LEAVE NEGATIVE FEEDBACK. WE WILL DO OUR BEST TO MAKE SURE YOU ARE A SATISFIED CUSTOMER!
|
|
|
Dotco 10L1200G36 Pneumatic Air Die Right Angle Grinder
Nice. Used tool here. Runs strong on air. I see stains, scratches and grind marks. Small cosmetic stuff.no abuse. Comes with a swivel air intake attachment. Thanks
|
|
|
Dotco 10L1200G36 12,000 RPM right angle die grinder, front exhaust .3 hp
This Dotco grinder is in great shape and was used very little.Works great. Posted with
|
|
|
Cleco Dotco Pneumatic Right Angle Grinder 116GLF-135RAB-W
Cleco Pneumatic right angle grinder model 116GLF-135RAB-W. 116 series(0.6HP) 13.500 RPM Wheel Size: 4" Seel Gaurd I tested the grinder and it works great. This is a very high quality USA made grinder intended for assembly line use so it will last a lifetime. The original cost was over $700 buy it here to save some money! The exact grinder in the picture is the one you will be receiving. Please ask any questions before purchasing. Check out my other listings. Thanks for looking!
|
|
|
Dotco 10L1281 Rear-Exhaust Right Angle Air Grinder Set Lot 20,000 RPM
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Dotco 10L1281 Rear-Exhaust Right-Angle Air Grinder Set Lot 20.000 RPM- Like new. 1/4" collet in it now; comes with 1/8" collet too; lubricator; wrenches. Please ask any questions you may have before bidding. I am listing items for a friend who had his own machine shop. I know nothing about the items. But will do my best to answer your questions. Please look closely at the photos for condition. Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Questions on items- If you have any questions. Please ask before bidding. I check my account regularly when I have listings. Smoke– All items are from a smoke free environment. If I happen to purchase something from a sale that has a smoke odor. I'll ... moremention that in the listing. Pets– None in my home. Please notify me within two days of receipt of item if you need to return it. Shipping– I try to ship within two days of receiving your payment. I generally ship using United States Postal Service. I estimate shipping charges using the UPS calculator and add a small amount to help cover the cost of packaging tape and padded envelopes. Boxes I usually get for free. I’ll combine shipping charges upon request. Satisfaction– Please let me know if you are not satisfied with your purchase. I try to describe the items accurately. But there’s a chance I might miss a flaw. Normal 0 false false false EN-US X-NONE X-NONE.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-143d2488782-0xff-
|
|
|
Dotco 10L1201G-3B Right Angle 20,000 RPM Pneumatic Grinder
Very Nice Dotco pneumatic grinder. SN 844384. Still has most of the original finish and labels. Tested. Spins smoothly. Very fast and quiet!
|
|
|
Dotco 15LF281-42 Right Angle Drill Grinder 90 PSI
Click thumbs to Enlarge Any additional photos will be below This grinder is previously owned and in good working condition. It has a few scuffs and scrapes. But remains fully functional and ready for inclusion in a new tool kit. Thanks, and happy bidding. Please see pictures. Pictures shown are of the actual item(s) you are bidding on. Auction includes: Dotco 15LF281-42 Grinder, SKU: 1/22f3-232-002124-ps Checkout: After the auction has ended please click the checkout button to proceed with your payment. Payments: Payments must be received within 3 days. Unpaid cases will automatically be open by eBay 7 days after purchase. Please note. If you enter the wrong billing address your card will be declined. Taxes: 7.125% Sales Tax to Minnesota buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving ... moreour emails please check your email spam filters. We Ship to confirmed addresses only! Make any changes to your address before paying. All items will be shipped to your confirmed billing address after payment. We will not accept changes after payment! We Ship to the Continental US ONLY! Please contact us on APO/FPO Shipping. These will cost more. We no longer ship to Hawaii. Shipping Carriers: UPS& USPS 1-6 Day. Local Pickups: $5 Per item handling fee. Contact us for details. We offer a 14 Day Money Back Guarantee unless noted"As Is" We do our very best to accurately describe our items. However If you have any problems please contact us within 14 days of delivery. Operating Hours: M-F 9:30am- 5:30PM Central Standard Time Is there a Buyitnow? We do not offer Buyitnows. Will you ship to this country or this country? We ship to the US only. What is the history of the item? Most of our items are used and we do not know the history. We test them and picture their current condition. What's Included? 99% of the time If it's pictured it's included. Please also read"Auction Includes" Inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
Dotco 7" Right Angle Sander MFR# 10L4206-80 Aircraft Grinder 90 degree 6000 rpm
Heavy Duty Dotco 7" Right Angle Sander MFR# 10L4206-80 Aircraft Grinder Sander Polisher 90 degree 6000 rpm@90psig max. Made in USA, Hicksville Ohio, a $1250.00 tool at new price, search mfr# Exhaust Holes Rotate Around 360 Deg. tool weight is 6.43 lbs, total length 16.5 inches. I do not feel any end play in angle head, sounds good under air pressure, has good torque!
|
|
|
Dotco Right Angle Grinder Model 10L1201-34
Here is a Dotco Right Angle Grinder Model 10L1201-34. It is in used with markings/signs of wear. Feel free to take a close up look at the pictures. It comes just as shown. Thank you. Feedback is very important to us. So if there are any issues/problems once you receive the item, please let me know before leaving feedback as I am very easy to work with. 7140
|
|
|
Dotco Right Angle Air Grinder Model 10LF201-36 - Air Tools
Up for auction is this very nice Dotco right angle air grinder. Condition: This grinder is in good cosmetic condition. There are only minor scuffs and marks on it from use. SEE IMAGES) Tested: This grinder has been tested and works properly. Brand: Dotco Model: Right angle grinder Model number: 10FL201-36 Auction Includes: Dotco right angle grinder ONLY. Pictures of the actual item are shown! Payments Online payments are accepted through PayPal ONLY. We do not accept any other forms of online payments. Cash/credit card payments are accepted with local pickup ONLY. Payment for all items is due within 5 days of the auctions selling date. Unless prior arrangements have been made to set a longer time frame. We ship items within 1 business day after receiving payment. Returns There is a‘no questions asked’ return policy for our returns. The buyer ... morehas 14 days to return an item if they are not satisfied for a full refund. Minus the shipping price and minus a 10% restocking fee. Our AS IS items do not quality for any refunds or returns. They are Final Sale purchases. Shipping Shipping is available within the continental United States. We offer combined shipping for your multiple purchases. Flat rate boxes are not used! We ship our items using UPS Ground& USPS for smaller items. If a package is returned to us because of an incorrect address or if someone was not there to accept the package. The buyer is responsible for any additional shipping charges. If prior arrangements are made. We will also ship to Hawaii and Alaska but additional fees/charges will apply. Please contact us for more information prior to bidding. We ship items within 1 business day after receiving payment. Local Pick Up All items are available for local pick up and are subject to 6% Michigan Sales Tax. Pickups can be made at our location in Roseville. MI. All local pick up customers will be required to present a valid form of ID with the IDENTICAL name that appears on their eBay account. If the
|
|
|
2 Dotco grinders.1 right angle and 1 straight. Both run great.see description
2 Dotco grinders. 1 right angle and 1 straight die grinder. Top quality aircraft tools. Right angle is 12.000 rpm and the straight grinder is 25,000 rpm. Both run excellent. Low starting bid.
|
|
|
Dotco Heavy Duty 10K5806 06 Pneumatic Right Angle Disc Grinder 6000RPM 90 psi
Dotco Pneumatic Right Angle Disc Grinder. Heavy Duty Model: 10K5806. 6000RPM 90 psi Industrial Grinder Nice Clean Working and cosmetic Condition FAST AND FREE PRIORITY SHIPPING! Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive. I go to the post office at everyday at 1.00pm Monday- Friday. If an item is bought and payed for before then item will be send it the same day. If any later it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy. Please visit and subscribe to my eBay Store and Facebook Page for more great items and friendly. Reliable customer service. And Great deals. Thank You For Viewing
|
|
|
Dotco Right Angle Ginders for Parts or Repair 20,000 RPM
Here are two Dotco 1/4 die grinders for parts or repair. They dont spin. Seem to be complete but I really am no expert in these things. Models 10L1201836 20.000 rpm, mdl 10l1200B 12,000 rpm. May be an easy rebuild project!
|
|
|
Dotco 10L1201036 20,000 RPM Right Angle Grinder
Nice little grinder. Runs very well. Quiet and fast!
|
|
|
Dotco Right Angle Pencil Grinder
80.000 RPM Model- 12R Used but good condition. Works great. Thanks for looking and happy bidding to you: Posted with
|
|
|
Dotco Right Angle Grinder 10L1281-36 with Hose
For sale is a used Dotco right angle grinder with hose. This particular tool model is 10L1281-36 with 20.000 RMP. This auction is for the tool only, no attachments. Shipping to Alaska and Hawaii extra Product Specs: Dotco 10L1281-36 right angle grinder is superb for a wide range of finishing and deburring applications. Hp=.3(22kw) Rear exhaust, 20,000 RPM Abrasive capacity=1/2" Carbide Bur, 1" Mtd. wheel. Weight=1.1lb, OAL=6.3" 1/4" air inlet, uses 300 series collet=1/4" composite housing. Standard equipment: applicable collet,collet wrench, PN 10L1281-36 made in Ohio USA
|
|
|
Cleco Dotco Pneumatic Right Angle Grinder 116GLF-115A-W3T4
BIDDING ON A USED BUT IN GOOD CONDITION CLECO RIGHT ANGLE GRINDER.THE PRODUCT HAS BEEN TESTED AND WORKS GREAT. MODEL# 116GLF-115AW3T4 11.500 RPM ALL OF OUR ITEMS ARE FULLY TESTED AND ARE 100% FUNCTIONAL. OUR ITEMS ARE LISTED AS-IS IN GOOD WORKING CONDITION. WE DO NOT ISSUE ANY REFUNDS OR PARTIAL REFUNDS ON OUR ITEMS. PLEASE MAKE SURE THAT THIS IS THE ITEM YOU WANT BEFORE YOU BID OR BUY IT NOW. THANKS.
|
|
|
DOTCO 10L12018 36, 20,000 RPM AIR PNEUMATIC RIGHT ANGLE GRINDER 1/4" NO LEAKS
I hooked the tool up to my compressor.it runs great with no leaks. Shipping to the United States Only. Hello and welcome to my listing. Please ask any questions you may have and I'll answer as soon as I can. Questions for auction items ending within 12 hours may not get answered. I take my 100% rating seriously. Ship fast, and want you to be satisfied with your purchase. I appreciate each buyer very much and everyone will receive my full attention and service. I treat people as I would like to be treated and respect your concerns and questions no matter how large or small. After careful packaging, I try to ship your item same or next day payment is received.
|
|
|
DOTCO 10L1200G-36 Right Angle Air Grinder 12,000 rpm 1/4" Collet
Previously owned Dotco angle grinder w/ wrench and free shipping. Great working tool that fits in the palm in your hand. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-146a50cf21f-0x124-
|
|
|
DOTCO 12L1280-36 RIGHT ANGLE PNEUMATIC 1/4" GRINDER 12,000 RPM
DOTCO 12L1280-36 RIGHT ANGLE PNEUMATIC 1/4" GRINDER 12.000 RPM-DOTCO MODEL RIGHT ANGLE PNEUMATIC GRINDER-DOTCO/ COOPER TOOLS MODEL 12L1280-36-RPM: 12.000-1/4" COLLET-WORKS GOOD-COMES EXACTLY AS PICTURED WITH WRENCHES-HAS SOME LIGHT SANDED MARKS WHERE MILITARY NUMBERS WHERE REMOVED(cosmetic) GREAT FIND!
|
|
|
Dotco Heavy Duty 10K5386 06 Pneumatic Right Angle Disc Grinder 6000RPM 90 psi
Up for sale is this USED Dotco Heavy Duty 10K5386 06 Pneumatic Right Angle Disc Grinder 6000RPM 90 psi. I do not have any attachments of the bolt that holds the attachments on. This is in working condition other then the bolt to hold the attachments on. I do show a picture of the threads. The threads are in very good condition. Buyer will pay 15.00 shipping in the continental USA only. I will ship worldwide but it will cost actual shipping cost. Thanks
|
|
|
DOTCO 10K2752C 83 RIGHT ANGLE GRINDER AIR TOOL PNEUMATIC 11,000 RPM
DESCRIPTION: USED. DOTCO AIR GRINDER. I HOOKED IT UP TO AIR AND IT RAN. OCCASIONALLY THE GRINDER WOULD NEED TO BE PUSHED TO GET GOING. THERE IS A LITTLE AIR COMING FROM THE UNDERSIDE OF THE TRIGGER(PIC 4) CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS ... moreWILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS
|
|
|
DOTCO Right Angle Die Grinder, 12L2718-36, 18000 rpm
DOTCO Right Angle Die Grinder#12L2718-36 18.000 rpm This used tool is in excellent condition. Runs good and strong. Former inventory ID numbers engraved on body. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-146e04e27ed-0x113-
|
|
|
Dotco 10lf200-36 right angle air grinder used
Dotco 10lf200-36 right angle grinder. 12000 rim, 90 psi, test and works great, the handle has a metal housing and us not plastic, email with any questions.
|
|
|
DOTCO Die Grinders, Right Angle and Straight 12lf201-36 & 12L2500-10
You are bidding on two DOTCO Die Grinders. Right Angle and Straight 12lf201-36& 12L2500-10. Used and in excellent working order. They have markings on them from previous owner. Payment by PayPal to be received 7 days from auction's end. Shipped to Continental US Only. No PO Boxes please. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-146ffeb6f78-0x119-
|
|
|
Dotco RIGHT ANGLE SANDER / GRINDER P/N 10L2251-84
Dotco RIGHT ANGLE SANDER/ GRINDER. FE, 9K, 4" TP27 DCW. Tool Works Great! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-1471c6f64a1-0x104-
|
|
|
Dotco 10K1201-36 Right Angle Sander
Front Exhaust 90°. 3Hp, 2-3" 20,000 RPM, Tool works great!
|
|
|
DOTCO 12L1280-36 Right Angle Pneumatic 1/4" Grinder 12000RPM
Item you are looking at is DOTCO 12L1280-36 Right Angle Pneumatic 1/4" Grinder 12000RPM. Item came to us here at the pawn shop- we do not have personal use of it. Item is used with signs of use. All in good working order. Pictured is actual item you will receive. Please see picture for best item description. Thanks for looking and happy bidding! WE DO NOT SHIP INTERNATIONALLY. WE SHIP ONLY PAYPAL CONFIRM ADDRESS. CALIFORNIA RESIDENT PAY CA SALE TAX. PAYMENT MUST BE MADE THROUGH PAYPAL. PAYMENT MUST BE MADE WITH IN 3 DAYS OF AUCTION END. PLEASE ALLOW US 3 DAYS AFTER PAYMENT FOR PACKAGE/SHIPPING.
|
|
|
Nice Dotco Right Angle Grinder!! 12000 RPM
Dotco Grinder
|
|
|
DOTCO 10L1200B36 RIGHT ANGLE 1/4" SMALL DIE AIR PNEUMATIC GRINDER ROTARY
DESCRIPTION: USED. DOTCO AIR GRINDER. 1/4" COLLET; 12,000 RPM; ENGRAVED; RUNS WITHOUT LEAKS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE ... moreWINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS.
|
|
|
Dotco 12L2752-8 Right Angle Air Grinder 11,000 RPM
Hello and have a great day! Don't hesitate to contact us. We are available Monday- Friday. 9am- 7pm CDT. Phone# 713-534-7296 This listing is for a used Dotco 12L2752-8 right angle air grinder. Tested and in well used condition with paint wear, scratches, dings, and personal markings. No additional items are included. Specs: Exhaust: side Free Speed: 11.000 RPM Abrasives capacity: 1" carbide burr. 2" Mtd. wheel Housing type: composite Weight: 3.4lbs. Head height: 3.9" Length: 9.8" Collet size: 1/4" Air inlet size: 1/4" Made in USA Please read item description thoroughly and review pictures provided in the listing. You may request additional photos through email. Pictures are of the actual item(s) included in the listing. Payments: Payment must be received within 2 weeks after the listing has ended. If you ... moreneed additional time. Please contact us and let us know. We only accept payments through PayPal. We do not have a credit card machine to run payments here at the store. Shipping: Will combine shipping for multiple items; just ask for invoice. Alaska/Hawaii residents. Please request a shipping quote. Unfortunately, we do not ship outside of the United States. Local pickup: We accept cash/debit/credit cards in-store. Address- 2131 S Richey Rd- Pasadena. TX 77502 We are located at the corner of Richey Rd and Allen Genoa Rd. Across from Walgreens. Concerns and Issues: If there is a problem with your purchase. The item was not as described, not functioning, or you changed your mind, please notify us either through email or phone. Emails/phone calls will typically go unanswered during the weekends and on some holidays, so please contact us between Mon-Fri, 9am-7pm CDT. Powered by
|
|
|
DOTCO Heavy Duty Head Right Angle Sander 10L2750-80 NEEDS REPAIR
On Apr-02-14 at 22:15:17 PDT. Seller added the following information:
|
|
|
DOTCO RIGHT ANGLE GRINDER 12L1201-36
DOTCO RIGHT ANGLE GRINDER. WITH BELT SANDER ATTACHMENT. GOOD CONDITION. 20000 RPM.
|
|
|
DOTCO RIGHT ANGLE 1/4" PNEUMATIC SMALL DIE AIR GRINDER MDL10L2252-84
I DO COMBINE SHIPPING. SO CHECK OUT MY OTHER ITEMS AND WAIT TO PAY TILL ALL ITEMS BIDDING ON HAVE BEEN WON AND I HAVE SENT YOU A COMBINED INVOICE
|
|
|
Dotco Right Angle Grinder, Mod# 10L1201B-38, 20000 rpm, 1/4" collet
Auction: You are bidding on a DOTCO Mini Angle Die Grinder 1/4" Used) Unit Runs well. Good condition. Normal wear(scratches. Nicks) from previous use in industrial environment. Please see photos. 1. Uses 300 series collet=1/4 2. 20000 RPM 3. Forward exhaust high speed 4. Sound Level dB 85 `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14833d6f551-0x113-
|
|
|
DOTCO Right Angle Sander/Polisher 12L1281-32 20,000 RPM
YOU ARE BIDDING ON A DOTCO RIGHT ANGLE SANDER GRINDER IN EXCELLENT CONDITION.PLEASE E MAIL QUESTION PRIOR TO BIDDING. PAYMENT IS DUE WITHIN 3 DAYS AFTER THE AUCTION ENDS. IF YOU HAVE FEWER THAN 5 FEEDBACKS I ASK THAT YOU CONACT ME BEFORE YOU BID OR YOUR BID MAY BE CANCELLED.
|
|
|
Dotco 12lf280-36 right angle air die grinder 1/4"
DOTCO 12lf280-36 right angle die grinder in great shape works perfect has utas rx2369 engraved on it does not come with wrenches or case
|
|
|
Dotco Right Angle Sander / Polisher - Air Tool - 10L5356 - Model 10L5356
Dotco Right Angle Sander/Polisher. Model 10L5356. RPM 6000. Shows signs of cosmetic wear on item. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1489a26ef6d-0x10e-
|
|
|
Dotco 10L1201B Right Angle Sander!
Up for auction is a Dotco Right Angle Sander! Has been tested& is in good working condition. Some cosmetic wear on the sander from past uses. We ship fast and securely! We accept PayPal only for payment and it is due within 3 days from the end of the auction. We only ship in the United States! No international orders. We ship within 1 business day of receiving cleared payment via USPS Priority Mail with a Tracking Number! If there are any questions feel free to contact us through eBay Message. Thank you for looking& happy bidding! ERB3894 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-148a2083c67-0x108-
|
|
|
Dotco In-Line / Right Angle Grinder Model: 10L1000A ~ 30,000 RPM / 90 PSIG
This listing is for a Used Dotco In-Line/ Right Angle Grinder Model: 10L1000A ~ 30.000 RPM/ 90 PSIG Pneumatic-Air Die Grinder Great Used Condition ~ Works Perfect ~ Has signs of Use ~ Please see photos. I believe it has a 1/4" Collet. It measures 5" Long w/o air piece. Please Read Everything Below Before Bidding/Buying* I do apologize if it sounds mean) If you have any issue with the item you receive. I politely ask that you message me Before Leaving FeedBack so we can resolve it. We can resolve most any problem easily. NO International or APO/ FPO Shipping. Additional charges may apply to AK& HI. If it is not pictured or described. Please do not assume it is included; because it likely will not be. I WILL NOT end auctions early for a BIN; so please don't ask as all requests will be ignored. Due to the high volume of non-payers; ... morereport will be filed after 5 days of non-payment. TX residents will be charged 8.25% sales tax. The item(s) in the picture(s) is/are exactly the item(s) you will be receiving.
|
|
|
Dotco 12R0380-18 Right Angle Pencil Grinder 80000 RPM
Up for Auction Dotco Grinder This is a Dotco Angle Pencil Grinder Model: 12R0380-18 80000RPM This has been previously owned and used This has been tested and is in working condition This tool does show signs of use and normal wear This will need a new grinding tip. We will do our best to make sure your given the best customer service as possible. If there is a problem Please contact us before you leave feedback. Thanks you. Images directly above are of the actual item. Also please view all of the photos and if there is a discrepancy between the description and the photos. The photos are the overriding factor(i.e. description may say good condition but photo may show a chip or flaw) MOST ITEMS WE SELL ARE USED. Some come from a smoke free home& some come from smokers homes. To save on the shipping fees we offer you Local Pick You can pick ... moreup your item Mon- Fri 10-6 Est. Return Policy We will ONLY accept return of the goods up for auction only if they are not as described in this listing. You will be responsible for all return shipping. You must Also contact us within 1 days of receiving the item or a refund will not be granted. The goods will be inspected upon return and a refund will sent after we inspect the item. NO Refunds for un damaged items or you changed your mind after the purchase. Please email us with questions prior to purchases. We will do our best to answer your questions. or call us at 586- 790-0100 Cash Exchange Consignment Center 35927 Gratiot Clinton Twp. MI 48035 We are open Mon- Fri 10AM to 6PM Est Time Cash Exchange IS NOT THE OWNER OR SELLER OF THESE GOODS. BUT IS A BAILLIE ACTING ON BEHALF OF THE SELLER TO FACILITATE THE SALE OF THE GOODS BY HOLDING THE GOODS UNTIL SUCH TIME AS A SALE IS COMPLETED AND THE GOODS ARE SHIPPED TO THE BUYER OR OTHERWISE DELIVERED TO THE BUYER. ALL ITEMS ARE OFFERED"AS IS" WITH NO WARRANTY, EITHER EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE PERTAINING TO THE MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OF ANY GOODS OFFERED IN THIS SALE.
|
|
|
Dotco Pneumatic High Speed Right Angle Grinder Sander w/ Adapter
Description- Model: 10L1200-36- Manufacturer: Dotco- Free Speed: 12.000 RPM- Output: 0.3 HP- Abrasive Capacity: 1/2" Carbide Bur. 1" Mtd. wheel- Overall Length: 6.3" Air Inlet: 1/4" Front Exhaust- Uses 300 series collet- Superb for a wide range of finishing and deburring- Very lightweight and easy to use. Tested and works good. May have some cosmetic markings/engravings. Comes with 3M disc/adapter `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-148e049196c-0x115-
|
|
|
Lot Of 10 Right Angle Die Grinders Snap-on Dotco Aro For Parts (k4)
10 die grinders for parts 7 snap-on 2 dotco and 1 aro
|
|
|
Dotco Right Angle Grinder, Mod# 10L1201B-36, 20000 rpm, 1/4" collet
Auction is for a DOTCO Mini Angle Die Grinder 1/4" Used) Unit Runs well. Shows signs of wear(scratches, nicks) Etching on tool from previous owner. Please see photos. 1. Uses 300 series collet 1/4" 2. 20000 RPM 3. Forward exhaust high speed 4. Sound Level dB 85
|
|
|
DOTCO 10L1200B36 12,000 RPM RIGHT ANGLE DIE GRINDER AIR PNEUMATIC
DESCRIPTION: USED. WORKING, ENGRAVED, DOTCO 1/4" GRINDER. I HOOKED IT UP TO AIR AND DID NOT FIND ANY LEAKS. IT WORKS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS ... moreIN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS
|
|
|
DOTCO 12000 RPM RIGHT ANGLE 1/4" DIE GRINDER
DOTCO 12000 RPM RIGHT ANGLE 1/4" DIE GRINDER Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Dotco 90 degree right angle 12.000 R.P.M. 1/4" pneumatic die grinder. This tool is used but far from used up! This is a high quality tool! No personal I.D. markings. Thank you for viewing this and my other auctions. Payment must be received within 3 days of auction completion. Buyer pays Expedited Shipping with Insurance charge of $6.99. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. Ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1493725f9d7-0x10f-
|
|
|
Lot Of 10 Right Angle Die Grinders 9 Snap-on 1 Dotco For Parts (h2)
Lot of 10 right angle die grinders
|
|
|
DOTCO 10L2251-84 RIGHT ANGLE PNEUMATIC GRINDERS, BUFFERS & POLISHERS 5/8-11
DOTCO 10L2251-84 RIGHT ANGLE PNEUMATIC GRINDERS. BUFFERS& POLISHERS 5/8-11( 9000RPM) Used but in excellent condition. What you see in the picture is what you get. ALL PAYMENT MUST MADE THROUGH PAYPAL. ITEM WILL SHIP OUT WITHIN 1 BUSINESS DAY WHEN ALL PAYMENT IS CLEARED UP. THANK YOU FOR LOOKING/ VISITING MY PAGE!
|
|
|
DOTCO PNEUMATIC RIGHT ANGLE DISC SANDER /DIE GRINDER - MODEL #10L2800C 81
We have a Dotco Right angle Grinder/Sander 10L2800C 18000 RPM in good working shape. It shows some normal usage wear. Please look at the pictures for close ups. It has been tested. Welcome to our auctions. Here we try to provide the best description and products for you to purchase. Please read our policies before placing your bid. Our Electric tools and electronics our tested here in our store as long as we have the cords to test them. Before listing them on ebay. Bidding: We ask if you have less than a 5 for your feedback rating to contact us before placing a bid on an item. We reserve the right to cancel any bidder with 5 or less feedback. If you have any questions about the item in this auction. Please ask before placing a bid. Payment: We accept Paypal. Payment must be received 4 days after the end of the auction. If payment isn’t received ... morea non payment alert will be sent to Ebay. If for any reason you can’t make payment in that time period email and let us know. Shipping: We use USPS and UPS. After payment is received the item will be shipped. Depending on the volume of items going out. It could take up to 3 days before your item gets shipped. But we do our best to get item shipped as soon as possible. Local pick-up is ok. Insurance is included. Because of problems in the past, all item are insured. Handling: Our handling charge covers our supplies and fuel costs to ship. Michigan Sales Tax 6% Applies to Michigan buyers only. We do not ship any electrical tools or electronics Internationally. Returns: We do not accept returns. Warranties: We offer no warranties on any of our item. These items are sold as is. So please, again read the description. We take no responsibility for injuries caused by any item we sell.
|
|
|
Dotco 10L1201G16 Right angle die Grinder 20'000 RPM
Dotco 10L1201G16 Right Angle Die Grinder 20.000 RPM Runs Very Well Smooth and Powerful Very Nice Tool as Pictured!
|
|
|
DOTCO PNEUMATIC RIGHT ANGLE DISC SANDER /DIE GRINDER AIRCRAFT TOOLS
DoTco pneumatic right angle Die grinder tool. USED some light scratches.
|
|
|
DOTCO Pneumatic High Speed Right Angle Grinder Sander W/ 85 NEW 2" grinding disc
This auction is for the grinder and all 85 NEW 3M 2" sanding discs. SCOTCH BRITE 20 FINE 9 COURSE 3M 31 COURSE 20 MEDIUM 5 FINE Dotco Pneumatic High Speed Right Angle Grinder Sander Description- Model: 10L1200-36- Manufacturer: Dotco- Free Speed: 12.000 RPM- Output: 0.3 HP- Abrasive Capacity: 1/2" Carbide Bur. 1" Mtd. wheel- Overall Length: 6.3" Air Inlet: 1/4" Front Exhaust- Uses 300 series collet- Superb for a wide range of finishing and deburring- Very lightweight and easy to use. Tested and works good. May have some cosmetic markings/engravings.
|
|
|
DOTCO Right Angle Pencil Grinder Pneumatic
80.000 RPM 5' long air hose 2 wrench 1 straight bur
|
|
|
DOTCO Right Angle Die Grinder, 12L1280-30 AIRCRAFT TOOLS
THIS IS A VERY NICE DOTCO 90 DEGREE DIE GRINDER IT HAS 12.000 RPMS AND FULL TORQUE THE GRINDER COMES WITH BOTH WRENCHES. GREASE W/GUN AND 1" CARBIDE ROTARY FILE THE GRINDER RUNS GREAT AND SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
|
Dotco 90 Right Angle Die Grinder. Made in USA AIRCRAFT TOOLS NEW VEINS
THIS IS A VERY NICE REBUILT DOTCO 90 DEGRE DIE GRINDER I PUT GREESE IN THE HEAD AND NEW VEINS IN THE MOTOR THE GRINDER HAS A 1/4 COLLET AND FULL POWER THE GRINDER HAS 20.000 RPMS SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
|
Lot Of 2 Blue Point/Dotco/IR 12000rpm Grinders Right Angle Airplane Tools
Up for auction is a Lot Of 2 12000rpm Grinders. Right Angle/90 Degrees. I can not find the manufacture on these but I assume they are one of three. Blue Point, Dotco, Ingersoll Rand. Good working condition. Any issues and I will accept a return and pay shipping.
|
|
|
Lot Of 3 Dotco Right Angle Die Grinders For Parts (mm)
3 dotco right angle grinders for parts 2 are 20000 rpm the other is 12000 rpm
|
|
|
dotco Right Angle Drill 3300 RPM Used W/extra Parts
Used dotco drill has wear and engraving on it but works in perfect condition Come with a couple of extra parts 3300 RPM
|
|
|
Dotco 12LF201-36 Right Angle Die Grinder. Made in USA!
DOTCO MODEL 12LF201-36 RIGHT ANGLE DIE GRINDER IN VERY NICE CONDITION. THE TOOL HAS BEEN TESTED AND WORKS AS IT SHOULD. PLEASE VIEW PHOTOS THEY ARE OF ACTUAL ITEM ANY QUESTIONS PLEASE FEEL FREE TO CALL ME AT 413*426*8952 PLEASE NOTE SHIPPING AND HANDLING ALSO INCLUDES BUBBLE WRAPPING. DELIVERY CONFORMATION AND FULL INSURANCE, THIS HAD RAISED THE COAST OF THE SHIPPING AND HANDLING SOME, BUT I FEEL IS WORTH IT, AND WILL GIVE US BOTH SOME PEACE OF MIND
|
|
|
Dotco 10LF201-36 Right Angle Grinder 1/4" 20,000 RPM
Dotco 10LF201-36 Right Angle Grinder 1/4" 20.000 RPM Dotco 10LF201-36 Right Angle Grinder 1/4" 20.000 RPM Dotco 10LF201-36 Right Angle Grinder 1/4" 20.000 RPM Dotco 10LF201-36 Right Angle Grinder 1/4" 20.000 RPM Dotco 10LF201-36 Right Angle Grinder 1/4" 20.000 RPM Excellent: Dotco 10LF201-36 Right Angle Grinder 1/4" 20.000 RPM Includes- Dotco 10LF201-36 Right Angle Grinder 1/4" 20.000 RPM Unit, Parts Manual, 2 Wrenches& Original Box. Features- Manufacturer Description& Tool Specs- This text is only informational purposes only. Any reference to warranty or items included in original packaging is not included with this auction. See our chart) Excellent Shipping: Shipping determined by your zip code. Please use Calculator to find your shipping charge. Includes $1.00 for handling. Item weighs 6 pounds. ... moreBox size will be approximately 12x8x7 originating zip is 88041 Silver City. Buyer pays insurance if wanted. International Customs buyer obligation Tool Specs: New $ Top picture is full shot of everything in auction. If you don't see it we don't have it. We list every item in the auction in the above description in the top box with the word" Includes: the items with auction will be behind that word and end at the period for that sentence. TOOL GRADING All Tools guaranteed to work. We do not supply or guarantee blades and bits ect. for units that require them(unless they are on the tool already) NIB: New in Box" Just what it says- original box. Packing, and paper work, just like from the store. Like New: Unused" Tool has never been used. May or may not have paper work or box. May have a mark or two, but not from use. Near New: Used a few times but still looks great! And works perfectly. Excellent: The tool shows some light signs of use. Works perfectly and still looks Very good! Used: Tool is used. Shows signs of being on the job site. Still looks ok and guaranteed to work. As Is: Tool is used condition. May or may not function. See description for Things
|
|
|
Suhner LWA-80, Air/Pneumatic 80,000 RPM Pencil Type Right Angle Grinder Dotco
Suhner LWA-80. Air/Pneumatic 80,000 RPM Pencil Type Right Angle Grinder About this item: The slightly used Suhner LWA-80 right angle pencil grinder is well suited to grinding and deburring applications with carbide burrs and mounted points. The small size. Light weight and high speed is ideal for fine, detail oriented work. The 1/8" collet will accept a variety of burrs and mounted points. This tool has all of the quality and durability you should expect from a tool made in Switzerland. It is not cheap, but with proper lubrication and maintenance, the service life of this tool is measured in decades, even in the most demanding environments. Suhner represents the highest caliber of power tool. This tool is in excellent condition. About this item Features 80.000 RPM Right Angle High Speed Pencil Type Grinder Side Exhaust With 360 Degree ... moreAdjustment Supplied With one 1/8" Collet(Other Sizes Are Available) and Spanner Wrenches For Mounted Points up to 1/4" and Carbide Burrs up to 1/8" Made in Switzerland-Long Lasting& Durable
|
|
|
Dotco Right Angle Grinder 10LF281-36 / 20,000 RPM / 1/4" Collet
| | | | Click to close full size. Dotco Right Angle Grinder 10LF281-36/ 20.000 RPM/ 1/4" Collet. Make: D otco Model: 10LF281-36 Condition: Used/Lightly Used- This item has been used but is still in decent condition. This item will be working mechanically(if applicable) but can have some signs of wear to the exterior(Ex. Light scratches. Scuffs or marks) Auction includes: Angle grinder only Guarantee: 30 Day satisfaction guarantee. Sales tax must be collected for all Arizona. Kentucky, Indiana, Texas, Tennessee, Illinois, Washington, Nevada, and Florida buyers. We are unable to accept orders from resellers. Store | About Us | Shipping | Payment | Terms of Sale | FAQ 01644 016444430130100100 SC Order: 93868 About Us Bid with confidence. World class customer service is always a top priority at Cash America! Cash America Internet Sales. ... moreInc. is an affiliate of Cash America International©, a NYSE company. Affiliates of Cash America have been operating pawnshops and providing specialty financial services for more than 25 years. Cash America affiliates currently have more than 1,000 locations in the United States and Mexico, operating under the brand names Cash America Pawn, SuperPawn, and Cashland. Please browse through and bid on our items with confidence. By listing our items here we hope to enable the buyer to browse a virtual store with merchandise from various states, and let the deals come to you! Our most important policy is customer satisfaction. Please contact us during or after the auction as we will do as much as possible to make sure you are happy. All items will be shipped quickly and professionally. We'd like to make the buying experience as carefree as possible and want your positive feedback. Our goal is to make sure you'd buy from us again and recommend us to friends and/or fellow eBay users. Feel free to email any questions not answered in the listing. Shipping We ship to all fifty states and any country listed in ebay's Global Shipping program. This item will be shipped via USPS
|
|
|
DOTCO 10L2750 - 80 7" RIGHT ANGLE Sander / Grinder Aluminum housing 6.000 RPM
DOTCO 10L2750 Heavy Duty Head RIGHT ANGLE Sander/ Grinder Aluminum housing 6.000 RPM.9hp. 5/8"11 Mount 1/4 in Inlet. It does have some cosmetic ware as shown in pictures but it does work very smooth and silent with no air leaks. It is missing the handle and it does have a Screw replacing it(also shown) COMBINE SHIPPING. If you want to buy more of our store items please do so and request an invoice before paying as we combine shipping. QUALITY GUARANTEE: We inspect and test all items that come into our shop. However. We deal with a large variety of items and our knowledge of some items is quite limited. Because of this we offer a 48 hour inspection period on all items that we sell. If you happen to find a problem with your item that we missed, please let us know within 48 hours of delivery. We will repair the item or refund your money ... moreif there is a problem that we cannot fix. Good customer service is our only goal. Please let us know immediately if there is a problem with your item. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Please note that we are not related with any of the companies that manufacture the products that we sale therefore if you have any questions regarding our products you can contact us directly. Mycyberoffice.com eBay Store Visit My eBay Store: MyCyberOffice The place for all your tools. Military surplus and much more needs Visit my eBay Store: MyCyberOffice
|
|
|
Dotco 136glsb-135a-d3t4 .8hp Right Angle Air Sander Grinder w/ Extended Head
Dotco 136glsb-135a-d3t4.8hp Right Angle Grinder 20 extra sand discs included w/ Extended Head Steel Housing 4" Wheel guard RPM:13.500 Arbor Spinner Size: 3/8" 1/4" air inlet Side Exhaust Weight: 3.8 lbs Everything in pictures included Good condition Please see pictures for further item condition Free shipping
|
|
|
Dotco tools MDL 10L2251-80 Right Angle sander Grinder
DOTCO MDL 10L2251-80 Right Angle Sander/Grinder 9000 RPM lightly used no engraving works great
|
|
|
Dotco 10L1200G-36 12,000 RPM right angle die grinder,
Nice working previously owned 12000rpm Dotco grinder. 7/16 wrench. Pad holder w/ sanding disc, air swivel fitting and free priority mail shipping included just need your correct air fitting to air line and your ready for work or play. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14bb88b1052-0x115-
|
|
 |