|
Order by:
Available to:
This site contains affiliate links for which I may be compensated
|
Buy It Now
Condition: Used Location: Columbia Station, United States Currently running grinder. Reconditioned radiator and torque limiter. Magnetic Head Pulley. Reversing Fan.
Buy It Now
Free Shipping Condition: New Location: Mount Pleasant, United States UNIVERSAL MORBARK WOOD CHIPPER SAFETY DECAL KIT - WILL WORK ON MANY DIFFERENT MODEL MORBARK CHIPPERS.
Buy It Now
Free Shipping Condition: New Location: Mount Pleasant, United States As sold to most major chipper makers since 2001. The Auto Feed Plus® reverse feature allows material to be backed up, preventing wood from rubbing against ... morethe disc or knives. Placed into production in 2001, machinery dealers worldwide who have tested Auto Feed Plus® have received it enthusiastically.
Buy It Now
$25.00 Shipping Condition: New Location: Mount Pleasant, United States NACD PTO this clutch kit is for the PTO 434510AM. why buy the Entire PTO. Used on Bandit Chippers and more! You can just buy the Clutch kit and save money. ... moreFits the following Clutch assembly’s. SAE #3 11.5 He ( single Plate) sideload or inline applications.
Buy It Now
$4.00 Shipping Condition: New Location: Mount Pleasant, United States
Buy It Now
$7.00 Shipping Condition: New Location: Mount Pleasant, United States
Buy It Now
$9.35 Shipping Condition: New – Open box Location: Saugerties, United States Outside may show signs of dust/wear from storage.
Buy It Now
$9.35 Shipping Condition: New – Open box Location: Saugerties, United States Outside may show signs of dust/wear from storage.
Buy It Now
Free Shipping Condition: New Location: Saint George, United States Morbark Drive Belt- Has 4 grooves. Fits: 2400 Morbark.
Buy It Now
$12.00 Shipping Condition: New Location: Mount Pleasant, United States MORBARK # 24181-565, MODELS 2400. THIS BELT FITS THE FOLLOWING MODELS AND MAYBE OTHERS.
Buy It Now
$35.00 Shipping Condition: New Location: Mount Pleasant, United States IF YOU HAVE AN ASEEMBLY AND THE MODEL IS SP211HP3, THIS IS MOST LIKELY THE CLUTCH YOU NEED, BUT NOT ALWAYS THE CASE.
Buy It Now
Free Shipping Condition: New Location: Coeur D Alene, United States
Buy It Now
Condition: Used Location: Columbia Station, United States Choose from our inventory of used, reconditioned and rebuilt grinders.
Buy It Now
$10.00 Shipping Condition: New Location: Rogers, United States Item #: 80870. • Local pick up is allowed. • Must be unused. Weight: 6.86 lbs. Bevel angle: 31 Degrees. # of holes: 4.
Buy It Now
Condition: Used Location: Cincinnati, United States COMES WITH ITS OWN TRAILERKOHLER COMMAND PRO 25 HPFULLY OPERATIONALFLEET MAINTAINED NO ISSUESEXCESS RENTAL INVENTORYBUY WITH CONFIDENCE FROM A SELLER ... moreWITH 100% POSTIVE FEEDBACK 52 YRS IN BUSINESS 4 LOCATIONS IN GREATER CINCINNATI OHIONO SHIPPING PICK UP IN CINCINNATICOMMERCIAL ENGINERAYCO IS MADE BY MORBARK THE LARGEST MANUFACTURE OF TREE EQUIPMENT IN THE WORLDREADY TO GO TO WORK AND MAKE SOME MONEY
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Blossvale, United States LCW Wood Chipper Knives 11-1/2" x 5" x 1/2" Precision / Morbark Split, Chipper Knife, Part # KSC-4 / 24992 42. Set of 6. NOS. New old stock. Box has shelf ... morewear and chipper blades may have light corrosion in areas. Please see photos for details.
Buy It Now
$9.35 Shipping Condition: New – Open box Location: Saugerties, United States New Never used.
Buy It Now
$10.00 Shipping Condition: New Location: Mount Pleasant, United States (INDIVIDUAL PIECES AVAILABLE ON OUR WEBSITE).
Buy It Now
$6.55 Shipping Condition: New – Open box Location: Saugerties, United States New Never used.
Buy It Now
$12.00 Shipping Condition: New Location: Mount Pleasant, United States PUSHER STYLE FAN.
Buy It Now
$10.00 Shipping Condition: New Location: Mount Pleasant, United States PART NUMBER X117.
Buy It Now
Free Shipping Condition: New Location: Mount Pleasant, United States DESIGNED FOR THE MORBARK G42SP 18 TOOTH SETUP & OTHERS. WE ARE AN AUTHORIZED GREENTEETH DEALER. THIS GENUINE GREENTEETH KIT INCLUDES THE FOLLOWING. 18- ... more900 SERIES GREENTEETH. THIS KIT INCLUDES ENOUGH HARDWARE TO MOUNT 18 TEETH TO A 3/4" CUTTER WHEEL.
Buy It Now
$30.00 Shipping Condition: New Location: Mount Pleasant, United States New Original Twin Disc Clutch/PTO PAC SP111C002. Twin Disc Part # is SP111C002 (Solid Friction Plate). Bandit Part # 904-0000-10.
Buy It Now
$10.77 Shipping Condition: New – Open box Location: Saugerties, United States Price is per tooth. Outside may show signs of dust/wear from storage.
Buy It Now
$6.55 Shipping Condition: New – Open box Location: Saugerties, United States New Never used.
Buy It Now
$12.00 Shipping Condition: New Location: Mount Pleasant, United States THIS BELT FITS THE FOLLOWING MODELS AND MAYBE OTHERS.
Buy It Now
$14.10 Shipping Condition: New – Open box Location: Saugerties, United States Outside may show signs of dust/wear from storage.
Buy It Now
Condition: Seller refurbished Location: Columbia Station, United States This 1996 13-foot tub grinder is powered by a 3412 800 hp CAT Diesel engine. Unit has air compressor and magnet. Screens are demolition size. There are ... more4600 hours on frame and engine. Unit was used recently for a land clearing job and is available immediately. Payment by PayPal. Wire transfer, certified funds, or company check(10 days hold on company checks) Payment should be received within 10 days of auction end or item will be relisted unless other arrangements have been approved. Availibility subject to prior sale from other sales efforts. W-02670. We will ship anywhere in the world. Buyer to arrange and pay for all transportation from FOB point. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$12.00 Shipping Condition: New Location: Mount Pleasant, United States WOODSMAN / TEREX # 20683132, MODELS 730. THIS BELT FITS THE FOLLOWING MODELS AND MAYBE OTHERS.
Buy It Now
Free Shipping Condition: New Location: Coraopolis, United States Morbark: Models 16, 300, 490. Rayco: 12D. These brush chipper knives are manufactured to OEM standards using modified A8 chipper knife steel. This material ... morehas the best balance of abrasion resistance, cutting edge retention and impact resistance of any material we've identified.
Buy It Now
$6.55 Shipping Condition: New – Open box Location: Saugerties, United States Outside may show signs of dust/wear from storage.
Buy It Now
$12.00 Shipping Condition: New Location: Mount Pleasant, United States BANDIT # 900-1904-48, MODELS 280XP, 990XP, 1390XP, 1590XP. THIS BELT FITS THE FOLLOWING MODELS AND MAYBE OTHERS.
Buy It Now
$5.95 Shipping Condition: New – Open box Location: Saugerties, United States Price is each.
Buy It Now
$5.95 Shipping Condition: New – Open box Location: Saugerties, United States Price is each.
Buy It Now
$500.00 Shipping Condition: New Location: Hinckley, United States Morbark 1300 Tub Floor Wear Plate Mount. Replace your worn out wear plate mount with a brand new one. Holds your anvils, flat wear plates etc. Weld in.
Buy It Now
$19.60 Shipping Condition: New Location: Saugerties, United States Fits to: Salsco Model 810M, 810 PTO, 813, 813XT, 818XL 824. Fits to: Woodchuck WC19. Fits to: JP Carlton 1260. Fits to: Bandit 65 (S/N 4017 - current), ... more150 (S/N 8900-15,800), 200 (S/N 8900-15,800), 250 (S/N 8900-15,800), 254XP (S/N 1007-1070), 280XP (split set Pre S/N 141), 1200, 1250, 1400.
Buy It Now
$14.69 Shipping Condition: New Location: Somerset, United States Bearing Retainer for NACD PTO Assembly 437717AM and Morbark 24547-803. Canada . Alaska, Puerto Rico and.
Buy It Now
Condition: Used Location: Pahrump, United States This Morbark tub grinder model 1300 is a reliable and efficient machine for forestry and agricultural needs. This machine had the teeth and mill gone ... morethrough and refurbished and did a perfect job. It had been used for light construction wood recycling and is ready for a new home .the actual price is $105,000…. This is my first listing so the max I was able to list this sale was $50k however the real price to purchase is $105,000.. Take it home today. As is where is. Located in Pahrump Nevada which is 60 miles west of Las Vegas nevada
Buy It Now
Condition: Used Location: Cincinnati, United States Ready to go to work and make money,THE TRAILER ALONE IS WORTH THE PRICE. EXCESS RENTAL INVENTORY. 4 LOCATIONS IN GREATER CINCINNATI OHIO.
|
|
MORBARK STORM CHIPPER
MORBARK STORM CHIPPER. 840 HRS WELL MAINTAINED. PERKINS DIESEL ENGINE, BASICALLY JUST BROKE IN, LIKE NEW OTHER THAN PAINT. ENGINE AND CHIPPER IN EXCELLENT SHAPE. PAY PAL NOT ACCEPTED. MUST HAVE CASHIERS CHECK IN FULL AT TIME OF PICKUP. FOR DETAILS CALL BRAD 559-967-4380.
|
|
Equipment for sale:2004 Bobcat T-250,35.5 cu.yd. dump trailer, Morbark chipper
2004 Bobcat T-250 w/ large grapple. Bucket and pallet fork attachments. 1 owner, low hours and always serviced $27,500 obo. Morbark chipper w/ a John Deere Engine. 3rd owner, owner operated chipper. $9,500 obo. 35.5 cu. yd. Anderson gooseneck dump trailer w/ high sides. Only used for 6 months. $10.500 obo. Located in S. Tampa. FL. Call for details or more info. 863) 838-9480.
|
|
1994 Morbark Chipper Model 10 E-Z
4 Cylinder. Ford Gas Engine. Rebuilt Frame and New Paint job.
|
|
2010 MORBARK D52SPH STUMP GRINDER CAT DIESEL DUAL WHEELS LOW HOURS
2010 MORBARK D52SPH STUMPGRINDER WIRELESS REMOTE DUAL WHEEL OPTION CAT DIESEL ENGINE ONLY 70HRS. SAVE LOTS OF $$$$$ MSRP $41350.00 BUY NOW FOR ONLY $25950.00 800x600 This is another example of the best value equipment being offered by Matt at Marshall Machinery Inc. Used equipment sales are“as is” Call Matt to set up a time to test drive or for trucking quote: 570-470-8560 Marshall Machinery Inc. has been serving the northeast for over 50 years. When you call. Ask for Matt. I am your equipment sales specialist delivering the best value with all my customers in mind! Matt’s contact info: 570-470-8560 We are registered to collect Sales tax for Pa.NY,NJ,MD. We do not accept credit card or PayPal payments over $5000.00. We do except credit card deposits. FINANCING IS AVAILABLE TO QUALIFIED BUYERS! Any questions call before you place a bid. Matt@ ... more570-470-8560 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
|
|
2000 Morbark Tornado Cummins Diesel Low 700 Hours Wood Chipper, Shredder Ex-City
2000 Morbark Tornado wood chipper 13" feed. New blades, great solid drum no cracks or welds, 90% tires, auto feed, safety bars, Cummins Diesel Engine Model 4.BT.9 Runs great and operates like new, great compression and no blow by, we just painted the unit, new pics will be added. the pics you see now are the original chipper unpainted) low 700 original hours. The city mecanics serviced it on 2-11-12 and since then just basically stored it at the City yard. It has a good straight solid frame and no rust at all. Came from a City here in California never been used and abused California Ok ARB tag good till 7/31/13. We Are a California Lic dealer sales tax will be collect unless shipped by a lic shipper shipping is appr 65 cents to 75 cents a mile. CALL OR TEXT LUCAS 818 521 1973 leave detailed message
|
|
2006 Morbark 18 Brush Chipper
18" capacity chipper powered by a 200HP John Deere Turbo diesel engine and equipped with reversing auto-feed. Hydraulic swivel discharge chute and hydraulic jack stand. Fully serviced and ready to chip now. Add a winch for only $3.850! We are a factory authorized Morbark dealer. P lease call Matt or Steve at 630/663-1400 for more info. We usually ship within one business day following cleared payment. We charge actuall shipping and handling charges. E-mail your zip code and we will verify actual shipping cost. We will gladly combine shipping. Financing is available on all items over $5.000. Payment is appreciated within 5 business days after item ends. Unpaid items will be filed after that. Illinois residents pay 7.25% sales tax. WI, MI, IN& IA residents are also subject to sales tax. Alexander Equipment is a full service dealer ... morefor Morbark Brush Chippers. Tub Grinders& Whole Tree Chippers, J.P. Carlton Stump Grinders, Boxer Mini-Skid Steers, Timberwolf Log Splitters, Firewood Processors, FAE Forestry Mowers and Stihl Power Products. We also maintain an impressive selection of Arborist Supplies including climbing ropes, carabiners, snaps, pulleys, saddles, lanyards, climbing spikes& accessories, pruning equipment, cabling equipment, safety gear and much more. Alexander Equipment. Inc. 4728 Yender Ave. Lisle. IL 60532 Phone: 630) 663-1400 Fax: 630) 663-9754
|
|
MORBARK MODEL 13 WOOD CHIPPER
MORBARK MODEL 13 THE UNIT UP FOR SALE IS A 1 OWNER UNIT AND HAS BEEN WELL MINTAINED AND SERVICED ON A REGULAR BASIS. THIS CHIPPER IS IN EXCELLENT RUNNING CONDITION WITH NEW BLADES. BELT,MUFFLER THE INJECTORS WERE JUST SERVICED AS WELL AS NEW PAINT, TIRES ARE IN GOOD CONDITION. PLEASE ASK IF YOU HAVE ANY QUESTIONS CONCERNING CHIPPER. THIS UNIT IS BEING SOLD AS IS I WILL DO MY BEST TO INSURE YOU HAVE ALL THE BEST INFORMATION POSSIBLE THANKS HAPPY BIDDING ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
|
|
1995 Morbark 17 Brush Chipper
Affordable 18" chipper powered by an 80HP Perkins diesel engine. Unit is in very good running condition. Price includes full servicing before sale. We are a factory authorized Morbark dealer. P lease call Matt or Steve at 630/663-1400 for more info. We usually ship within one business day following cleared payment. We charge actuall shipping and handling charges. E-mail your zip code and we will verify actual shipping cost. We will gladly combine shipping. Financing is available on all items over $5.000. Payment is appreciated within 5 business days after item ends. Unpaid items will be filed after that. Illinois residents pay 7.25% sales tax. WI, MI, IN& IA residents are also subject to sales tax. Alexander Equipment is a full service dealer for Morbark Brush Chippers. Tub Grinders& Whole Tree Chippers, J.P. Carlton Stump Grinders, ... moreBoxer Mini-Skid Steers, Timberwolf Log Splitters, Firewood Processors, FAE Forestry Mowers and Stihl Power Products. We also maintain an impressive selection of Arborist Supplies including climbing ropes, carabiners, snaps, pulleys, saddles, lanyards, climbing spikes& accessories, pruning equipment, cabling equipment, safety gear and much more. Alexander Equipment. Inc. 4728 Yender Ave. Lisle. IL 60532 Phone: 630) 663-1400 Fax: 630) 663-9754
|
|
1990 MORBARK CHIPPER MODEL 290 FORESTRY ABORIST 3.9L CUMMINS DIESEL ENGINE
1990 MORBARK CHIPPER MODEL 290 FORESTRY ABORIST 3.9L CUMMINS DIESEL ENGINE Equipment. Condition: Used Make: Morbark Model: 290 Model Year: 1990 Hours: 3617 Hitch Type: PINTLE Horsepower(HP) 76 Type: Wood Chipper Contact information. Aaron Deplazes 192 INDUSTRIAL PARK DRIVE PEARISBURG. VA 24134 Phone: 540) 599-0592 Email: adeplaze@gmail.com Description. 1990 MORBARK MODEL 290 3.9L CUMMINS 4 CYLINDER DIESEL HP: 76 RPM: 2500 HOURS: 3617 PINTLE HITCH HYDRAULIC FEED YOUTUBE VIDEO OF THIS CHIPPER GOOD RUNNING CHIPPER. READY TO WORK PLEASE CALL AARON AT 540-599-0592 WITH ANY QUESTIONS OR IF YOU NEED A SHIPPING QUOTE DUE TO PREVIOUS ISSUES WITH NON-PAYING BIDDER. WE REQUIRE A $500 DEPOSIT WITHIN 24 HOURS. PLEASE CALL IF YOU HAVE ANY ISSUES WHEN MAKING YOUR DEPOSIT. FULL PAYMENT FOR THE ITEM IS DUE WITHIN 7 DAYS. IF YOU HAVE QUESTIONS ABOUT THIS ITEM, ... morePLEASE CONTACT US BEFORE BIDDING OR BUYING. Photos. About Us. We are a Truck and Equipment Dealer that sells all types of trucks and heavy equipment.We are located in the Industrial Park in Pearisburg Va on us route 100. We are located at 192 Industrial Park Drive Pearisburg. Va 24134. We are aprox 30 miles off of Interstate 81 at exit 118b in VA and 25 miles off of Interstate 77 at exit 9 in WV.We have been in Bussiness over 20 years. We can arrange shipping on anything to anywhere in the world at very reasonable rates.We can and will help out any way we can on every sale! www.Worldwidequipment.com General Terms& Conditions. General Terms& Conditions: Deposit: Deposit of $500 must be paid within 24 hours of auction close. Payment: Items will not be available for pickup or shipping until full payment is received and cleared by our local bank. Buyer has 5 days to pay. Return Policy: If you are not satisfied with your equipment upon delivery. Please notify us immediately. Returns accepted within 5 days of purchase. You will be responsible for return shipping. Financing: We offer financing through eBays Equipment Financing program. Availability: We reserve the right t
|
|
2006 Morbark D52SP Diesel Self Propelled Stump Grinder Cutter 20 Hours!
2006 Morbark D52SP Stump Grinder Cat 3013C Diesel 34 Horsepower Hydrostatic Drive Hydraulic Dozer Blade Removeable Dual Rear Wheels Articulating Front Axle 52" Boom Arc Swing In Great Shape Only 20 Hours! I DO NOT ACCEPT PAYPAL! For A Quick Shipping Quote Please Provide Me With Your Zip Code. California Sales Tax Of 8.25% Will Be Collected Unless Shipped Out Of State By A Common Carrier. Any Questions Call Matt 562-587-5631
|
|
MORBARK 12" AUTO FEED WOOD CHIPPER 3.9 CUMMINS 76HP LOW HOURS
MORBARK WOOD CHIPPER 12" FEED 3.9 CUMMINS DIESEL 76HP 1221 HOURS PINTLE HITCH MACHINE STARTS AND RUNS GREAT ALL ITEMS ARE LOCATED AT OUR BUSSINESS LOCATION 307 CROFT RD PEMBROKE VA 24136 PLEASE CONTACT JOSH AT 540-320-8606 WITH ANY QUESTIONS OR IF YOU NEED A SHIPPING QUOTE WE DO REQUEST CASHIERS CHECK OR WIRE TRANSFER FOR ANY TRANSACTIONS OVER 1500 DOLLARS THANKS
|
|
1994 Morbark Model 13 Automatic Feed Diesel Wood Chipper
Morbark Model 13 auto feed diesel wood chipper. John Deere 4 cylinder diesel. Runs and operates like it should. 1051 hours. Any questions. Please call 614-746-9939. Thanks for looking and no Paypal on this item. Posted with
|
|
1992 MORBARK 27 RXL LOG CHIPPER
92 MORBARK MODEL 27RXL WHOLE TREE CHIPPER. NEW DISC SHAFT AND BEARINGS, NEW DECK CHAIN AND SPROCKETS, NEW CLUTCH AND BELTS, LEVER CONTROLLED, TO MANY NEW PARTS TO LIST.WOODS READY! PLEASE CALL 231-824-9505 LUTKE EQUIPMENT LLC 606 RW HARRIS DR MANTON MI 49663
|
|
1998 MORBARK 30/36 CHIPPER
We are selling a 1998 morbark 30/36 chipper/shredder with a 325 hp 3306 cat motor. Always serviced at factory intervals. Very good shape. Has about 3500 hours on it. call 916-612-1855 for more info or email us. We will sell and ship to anywhere in the world. Located in graeagle.Ca. You can view our entire inventory at
|
|
Morbark Automatic Auto Feed Wood Brush Chipper
Morbark wood chipper. Runs and chips fine. Ford 4 cylinder gas engine. Needs paint. Please call 614-746-9939 if you have any questions. Thanks for looking and no PAYPAL on this item. Posted with
|
|
Morbark Wolverine M.U.T. Multi Utility Tractor, Shear, Brush Grapple, Bucket
Morbark Wolverine. Multi Utility Tractor or M.U.T. with Telescopic Boom Forestry Tractor Construction or Demolition& Recycling Industries. 3 Quick Change Attachments as shown. Brush Grapple, Shear and Bucket, The Telescopic Boom. 20 ft Vertical Reach. 14ft horizontal Engine: 4 cylinder 3.9 Cummins. 100hp) Tires Front: 23.1x26 Forestry. Rear: 18x19.5( 16ply) Measures. ~ 9ft wide x 11'3" x 9 tall( est. 14.000 lbs. not including attachments. Works Great. Runs& functions like it should well maintained. and used properly not abused Questions? Offers. $ Please e-mail or Call us for details. Tel# 503.512.5407 Toll Free: 1-866-380-3922 Serious Buyers and Winning Bidders Some type of Contact is Required with in 72 hours To Secure Sale* This item is also Advertised in other Publications. First come First Serve. DONT WAIT BID Today. ... moreMAY THE HIGHEST BID WIN!
|
|
1998 morbark 30/36 Track chipper Kobulco 150 runner under cariage
nice Mobark 30/36 track chipper. Kobulco bade runner under carrage auto feed auto down pressure. 325 hp Remote control. any qustions please call Billy at 330-388-1435
|
|
Morbark Wood chipperSuper Beaver 6 Cylinder Ford Engine Runs - Needs PTO Work
Morbark Chip Spreader Super Beaver 6 Cylinder Ford Engine Runs- Needs PTO Work Call Jason at 248-672-0762 with questions. Posted with
|
|
Morbark 950
Morbark 950 in excellent shape recently serviced. new clutch. New hammers hammers and hammermil in great shape Super Low Hours 700 Engine starts, sounds and works great Municipal machine, all services performed on time 3 sets of screens Ready to work and make you money Can be hauled with a one ton truck Will pay for itself the first year On Mar-01-13 at 07:00:06 PST. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES: 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f0452885e-0xfc-
|
|
Morbark 48" 3 knife chipper chip pac
Morbark 48" 3 knife chipper and chip loader. Good condition. 75 HP motor. Shaker/sizer screen set up for paper grade chips. Many extra knives and some spare parts sell with unit. The starter/panel has been removed but I have an extra starter and panel that I will throw in with the sale of this chipper. Payment by cash or certified check with bank letter of gaurantee only for this item. Unit is ready to load. For sale locally. May end auction at any time. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. Di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13f069ec3c4-0xf1-
|
|
2009 Morbark 50/48 Drum Chipper,Ready for work !!!!!!!!!!
2009 Morbark 50/48 Hours 1022 Cat 875 HP Engine Drum Chipper Wireless remote. Ready for work.Need nothing.Runs great Machine is located in Mantua.Oh 44255,20 miles southeast of Cleveland. Deliver maybe possible. Any? please call Billy at 330-388-1435
|
|
Morbark 290 12" Wood Tree Chipper Self Feed Cummins Diesel Trailer Mount Chute !
This auction is for a Morbark 290 12" Capacity Self Feed Wood Chipper.This unit is in GOOD CONDITION AND WORKS 100% This unit is Powered By A Cummins 4B 80HP 4 Cylinder Diesel Engine That STARTS AND RUNS GREAT AND DOES NOT SMOKE! This unit is NOT BUSTED OR CRACKED UP AT ALL! Morbark 290 12" Capacity Trailer Mounted Wood Tree Chipper Machine Shows 613 Hours On A New Motor Self Feed Chipper Feed Wheels Are In Good Condition Chute Will Rotate Left Or Right Disk Chipper With Good Blades And an Extra Set Blades Cummins 4B 80 HP 4 Cylinder Diesel Engine That Starts And Runs Great No Smoke All Trailer Ligths Lights Work 7 Way Camper Plug Pulls With A Pintle Ring Lockable Engine Panels All Filters And Fliuds Have Been Changed Normal Scratches There Is A Few Rust Spots NOT A NEW CHIPPER BUT WILL DO ALOT OF WORK! NOT CRACED OR WELDED UP AT ... moreALL! Please see all pictures and video. If you want to come by and run this machine you are more then welcome we have nothing to hide. You can come play with it all day. Please email or call Nick(814)658-3066 We can ship no problem! Please just email or call for a freight quote 24/7. We Give a 5 Star Service on Ebay and are ready to help in any way. If you have any questions please ask I Will be glad to help Just Email or Call(814)658-3066 Thanks Nick Payment: For payment we will take the following: $250.00 Paypal depoist due with in 24 hours of the auction close. Remainder due with in 5 business days. Shipping Costs: We DO NOT mark up any shipping prices. What it costs me it will cost you. There is no pallet fee. No loading fee and no banding fee. We get a 70% discount with our freight broker on LTL shipments and we pass that along to you. We make no money on shipping! Please understand diesel fuel is almost $5.00 a gallon. We are glad to help in any way with customer pickups also. Please when letting feedback on the DSR remember We are Providing a 5 Star Service and Would Like a Five Star DSR Rating In Return. Please if you have any questions call us we are glad to
|
|
Morbark wood chipper ford ind. gas motor , 10" log, hdy feed
Morbark chipper s/n 02587 one owner.Ford power, hdy Feed low hours, also another chippers starting at $2,900 and up! ready to go to work! Only Paypal deposit if $500 balance in cash or casher check! Also have ten other chippers from $3800 to $12,500 Call BOB for more info: 810 629 9376 for more details if interested 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13f2514c6ae-0xf8-
|
|
Morbark model 17 diesel chipper
Good tires wheels. New Turbo, fuel solenoid, chipper runs great. Knives in fair condition, needs trailer brakes. Selling as is.
|
|
MORBARK 3 WHEEL 44" FELLER BUNCHER TREE SHEAR A/C ENCLOSED CAB
MORBARK 3 WHEEL 44" FELLER BUNCHER TREE SHEAR A/C ENCLOSED CAB Equipment. Condition: Used Make: MORBARK Model: WOLVERINE Hours: 1854 Contact information. Aaron Deplazes 192 INDUSTRIAL PARK DRIVE PEARISBURG. VA 24134 Phone: 540) 599-0592 Email: adeplaze@gmail.com Description. MORBARK TREE SHEAR WOLVERINE A/C ENCLOSED CAB 1854 HOURS 23.1-26 FORESTRY SPECIAL TIRES 44" 4 CYL TURBO DIESEL ENGINE MACHINE STARTS AND RUNS GREAT READY FOR WORK PLEASE CALL AARON AT 540-599-0592 WITH ANY QUESTIONS OR IF YOU NEED A SHIPPING QUOTE About Us. We are a Truck and Equipment Dealer that sells all types of trucks and heavy equipment.We are located in the Industrial Park in Pearisburg Va on us route 100. We are located at 192 Industrial Park Drive Pearisburg. Va 24134. We are aprox 30 miles off of Interstate 81 at exit 118b in VA and 25 miles off of ... moreInterstate 77 at exit 9 in WV.We have been in Bussiness over 20 years. We can arrange shipping on anything to anywhere in the world at very reasonable rates.We can and will help out any way we can on every sale! www.Worldwidequipment.com General Terms& Conditions. General Terms& Conditions: Deposit: Deposit of $500 must be paid within 24 hours of auction close. Payment: Items will not be available for pickup or shipping until full payment is received and cleared by our local bank. Buyer has 5 days to pay. Return Policy: If you are not satisfied with your equipment upon delivery. Please notify us immediately. Returns accepted within 5 days of purchase. You will be responsible for return shipping. Financing: We offer financing through eBays Equipment Financing program. Availability: We reserve the right to remove this listing due to on-site sales. Fees& Taxes: Buyer pays all sales tax and related fees. Virginia residents pay 5.00% sales tax. Out-of-State buyers may register and pay applicable taxes in their home state. Winning bidder must contact me within 24 hours of auction end and make arrangements for payment at that time. A $500.00 non-refundable deposit is due wi
|
|
2005 Morbark 6 Cyclone Brush Chipper
Used Morbark 6 Cyclone Brush Chipper Year Make& Model Engine Condition Price($) 2005 Morbark 6 Cyclone Brush Chipper 33.7HP Cat Diesel Excellent condition with only 184 hours! 6" capacity with auto-feed. Perfect for light trimming and clean-up. Price includes full service before sale. $11.900 P lease call Matt or Steve at 630/663-1400 for more info. We usually ship within one business day following cleared payment. We charge actual shipping and handling charges. E-mail your zip code and we will verify actual shipping cost. We will gladly combine shipping. Financing is available on all items over $5.000. Payment is appreciated within 5 business days after item ends. Unpaid items will be filed after that. Illinois residents pay 7.25% sales tax. WI, MI, IN& IA residents are also subject to sales tax. Alexander Equipment is a full ... moreservice dealer for Morbark Brush Chippers. Tub Grinders& Whole Tree Chippers, J.P. Carlton Stump Grinders, Boxer Mini-Skid Steers, Timberwolf Log Splitters, Firewood Processors, FAE Forestry Mowers and Stihl Power Products. We also maintain an impressive selection of Arborist Supplies including climbing ropes, carabiners, snaps, pulleys, saddles, lanyards, climbing spikes& accessories, pruning equipment, cabling equipment, safety gear and much more. Alexander Equipment. Inc. 4728 Yender Ave. Lisle. IL 60532 Phone: 630) 663-1400 Fax: 630) 663-9754
|
|
2009 Morbark 15 Brush Chipper
Used Morbark 15 Brush Chipper Year Make& Model Engine Condition Price($) 2009 Morbark 15 Brush Chipper 140HP John Deere Turbo Excellent Village trade with winch and hydraulic jack stand. This is a very well maintained 15" chipper with great production capacity! Also available without winch for $29.900. $32.900 with Winch. P lease call Matt or Steve at 630/663-1400 for more info. We usually ship within one business day following cleared payment. We charge actual shipping and handling charges. E-mail your zip code and we will verify actual shipping cost. We will gladly combine shipping. Financing is available on all items over $5.000. Payment is appreciated within 5 business days after item ends. Unpaid items will be filed after that. Illinois residents pay 7.25% sales tax. WI, MI, IN& IA residents are also subject to sales tax. ... moreAlexander Equipment is a full service dealer for Morbark Brush Chippers. Tub Grinders& Whole Tree Chippers, J.P. Carlton Stump Grinders, Boxer Mini-Skid Steers, Timberwolf Log Splitters, Firewood Processors, FAE Forestry Mowers and Stihl Power Products. We also maintain an impressive selection of Arborist Supplies including climbing ropes, carabiners, snaps, pulleys, saddles, lanyards, climbing spikes& accessories, pruning equipment, cabling equipment, safety gear and much more. Alexander Equipment. Inc. 4728 Yender Ave. Lisle. IL 60532 Phone: 630) 663-1400 Fax: 630) 663-9754
|
|
Morbark Model 2060 Wood Chipper
2001 Morbark 2060 Wood Chipper.I bought it from Alexander Equip.I have used it just for stuff around the house and I was told when I bought it the first owner did the same thing.Self feed and has a twin cylinder gas engine.Comes with spare tire and belts.Local pickup only
|
|
Morbark Hydraulic Winch
Morbark Hydraulic Winch Save countless labor hours and reduce injuries with a high production winch for your Morbark chipper. 5.000 lb. capacity winch complete with 100' rope, decals, handle assembly and hose clamp. Mounts easily to most Morbark chippers! Price includes freight anywhere in the continental U.S. Price: $4.495 P lease call Matt or Steve at 630/663-1400 for more info. We usually ship within one business day following cleared payment. We charge actual shipping and handling charges. E-mail your zip code and we will verify actual shipping cost. We will gladly combine shipping. Financing is available on all items over $5.000. Payment is appreciated within 5 business days after item ends. Unpaid items will be filed after that. Illinois residents pay 7.25% sales tax. WI, MI, IN& IA residents are also subject to sales tax. Alexander ... moreEquipment is a full service dealer for Morbark Brush Chippers. Tub Grinders& Whole Tree Chippers, J.P. Carlton Stump Grinders, Boxer Mini-Skid Steers, Timberwolf Log Splitters, Firewood Processors, FAE Forestry Mowers and Stihl Power Products. We also maintain an impressive selection of Arborist Supplies including climbing ropes, carabiners, snaps, pulleys, saddles, lanyards, climbing spikes& accessories, pruning equipment, cabling equipment, safety gear and much more. Alexander Equipment. Inc. 4728 Yender Ave. Lisle. IL 60532 Phone: 630) 663-1400 Fax: 630) 663-9754 ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f7c028f31-0xfe-
|
|
Wood Chipper, Eager Beaver, Morbark, Diesel power
I bought this chipper in the late 1990s' I believe it to be a model 290 Morbark. It has a Perkins diesel that runs great. It is a disc model with two knives. And is fed through the chute with two counter hydraulic rotating spiked drums. The direction of the drums are controlled with the tubular handle that flanks the chute. Push the handle forward and the drums drag the log, limbs or brush into the machine. Pull the handle back and the drums reverse direction. I have fed a 12" log into this chipper with no problem. The suspension had been replaced shortly after purchase. There were broken leafs in the spring packs. Fenders. Lights and wiring all have been replaced. You can see several different colors of paint on the chipper. When I bought the chipper it was all the dark red color. Over the years the paint started to peel in areas ... moreand the other colors revealed. The disc assembly. The complete assembly, was replaced and has less than 8 hours running time. You can chip a lot of wood in eight hours running time.The diesel starter was replaced last fall. The chipper has been serviced this spring and is ready to go to work. I fabricated a disc lock for the pintle ring that can be seen in the first picture. It locks out the tongue of the chipper. All gauges work and the tongue has a splitter. Never used the tongue splitter. I'm getting up in the years now and I had to make the hard decision to give up my tree business. I'm selling my tree equipment and chipper truck. I'm getting too old for this type of work. Even though it was part time. My day job has put me permantly on dayshift and it has ended my opportunity to conduct the business I had been able to do when on afternoons. I had worked afternoons for over 20 years and it afforded me the time to conduct the part time tree business. This chipper is quite a piece of equipment that can make you a lot of money. Ask all questions before making an offer. There have been several chippers recently on Ebay that resembles this chipper. They have nice pai
|
|
2001 MORBARK 2070 XL TWISTER CHIPPER ARBORIST FORESTRY PERKINS DIESEL AUTO FEED
2001 MORBARK 2070 XL TWISTER CHIPPER ARBORIST FORESTRY PERKINS DIESEL AUTO FEED Equipment. Condition: Used Make: Morbark Model: 2070 TWISTER Model Year: 2001 Serial Number: 4S8SZ15141W070101 Hitch Type: PINTLE Type: Wood Chipper Contact information. Aaron Deplazes 192 INDUSTRIAL PARK DRIVE PEARISBURG. VA 24134 Phone: 540) 599-0592 Email: adeplaze@gmail.com Description. 2001 MORBARK CHIPPER MODEL: 2070 XL TWISTER SERIAL# 4S8SZ15141W070101 10" HYDRAULIC FEED PERKINS DIESEL ENGINE ROTATING CHUTE PINTLE HITCH PLEASE CALL AARON AT 540-599-0592 WITH ANY QUESTIONS OR IF YOU NEED A SHIPPING QUOTE DUE TO PREVIOUS ISSUES WITH NON-PAYING BIDDERS. WE REQUIRE A $500 DEPOSIT WITHIN 24 HOURS. PLEASE CALL IF YOU HAVE ANY ISSUES WHEN MAKING YOUR DEPOSIT. FULL PAYMENT FOR THE ITEM IS DUE WITHIN 7 DAYS. IF YOU HAVE QUESTIONS ABOUT THIS ITEM, PLEASE CONTACT ... moreUS BEFORE BIDDING OR BUYING Photos. About Us. We are a Truck and Equipment Dealer that sells all types of trucks and heavy equipment.We are located in the Industrial Park in Pearisburg Va on us route 100. We are located at 192 Industrial Park Drive Pearisburg. Va 24134. We are aprox 30 miles off of Interstate 81 at exit 118b in VA and 25 miles off of Interstate 77 at exit 9 in WV.We have been in Bussiness over 20 years. We can arrange shipping on anything to anywhere in the world at very reasonable rates.We can and will help out any way we can on every sale! www.Worldwidequipment.com General Terms& Conditions. General Terms& Conditions: Deposit: Deposit of $500 must be paid within 24 hours of auction close. Payment: Items will not be available for pickup or shipping until full payment is received and cleared by our local bank. Buyer has 5 days to pay. Return Policy: If you are not satisfied with your equipment upon delivery. Please notify us immediately. Returns accepted within 5 days of purchase. You will be responsible for return shipping. Financing: We offer financing through eBays Equipment Financing program. Availability: We reserve the right to remove this list
|
|
VERMEER SC252 STUMP GRINDER MULCHER TRAILER MOUNTED KOHLER ENGINE BANDIT MORBARK
VERMEER SC252 STUMP GRINDER KOHLER ENGIE LOW HOURS READING 721 TRAILER MOUNTED(BILL OF SALE ONLY) LOOK AT THE PICTURES LIKE NEW RUNS AND OPERATES GREAT GRINDER IS FOR SALE LOCALLY PLEASE CALL 1-304-279-9744 WITH ANY QUESTIONS Equipped with exclusive features. The SC252 provides full-sized stump-cutting power in a compact unit. Safety features include a patented cutter wheel guard and an operator presence system that disengages the cutter wheel if the operator lets go of the controls. Yellow Jacket™ Cutter System helps extend pocket and tooth life. Opt for the exclusive Vermeer AutoSweep® technology that adjusts the cutter wheel swing speed automatically to reduce engine and drive train stress. Get to work quickly with the user-friendly control system. Select the optional hydraulic front steer package with its oscillating axle. Hardened ... moresteel pivot pins and more. Improve flotation and stability when you choose the optional rear dual tires. Protect your investment with a 3-year/3000-hour extended limited warranty on applicable gearboxes and driveline. And a 1-year/1000-hour Vermeer equipment limited warranty. See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts. General Dimensions and Weights Length. 115" 292.1 cm. Width. 35" 88.9 cm. Height. 53" 134.6 cm. Overall Height Transport. 53" 134.6 cm. Weight- Engine Option One. 1040 lbs. 471.7 kg. Weight With Dual Wheel Option(Additional) 14.5 lbs. 6.5 kg. Width with Dual Wheel Option(Additional) 49.5" 125.7 cm. Sound Power. 103 dB(a) Engine Option One Make and Model. Kohler Command. Number of Cylinders. 2. Gross Horsepower(Maximum) 27 hp. 20.1 kw. Torque(Max) 42.7 ft-lb. 58.1 Nm. Fuel Tank Capacity. 6 gal. 22.7 L. Max Fuel Consumption. 2.4 gph. 9.1 lph. Fuel Type. Gas. Air Cleaner. Dry type safety element and restriction indicator. Oil Filter. Spin on. Recommended Oil. 10W30 Kohler. Oil Volume with Filter. 2 qt. 1.9 L. Maximum Angle of Continuous Operation. 21 deg. Cooling Medium. Air. Clutch Type. Electri
|
|
2006 Morbark 2355A Flail Chiparvester wood chipper
This Morbark machine runs on a CAT 3412ETTA engine with 1000 hp. Other features include: 23"x55" infeed opening. 75" chipper wheel with 3 pocket knife system set for Iggesund tool knives. 23" throat-23 ft knuckleboom loader for self feed-1878 hours on engine
|
|
Morbark 58" 3 Knife Chip Pac Chipper (inspection advised)
Morbark 58" 3 Knife Chip Pac Chipper call Joe 541-459-7840 for inspection
|
|
2009 MORBARK M18R 18" DRUM CHIPPER, CAT 114HP ENGINE, 1450 HOURS
2009 MORBARK M18R 18" DRUM CHIPPER. CAT 114HP ENGINE, 1450 HOURS AS OF 7/2013, HYDRAULIC FLOW CONTROL FOR INFEED, SMART FEED, 360 DEGREE SWIVEL DISCHARGE, NICE CLEAN MUNICIPAL TRADE-IN CHIPPER/ Call Karl@ 716)622-7041. All Items Sold As Is. Methods of Payment Accepted: Bank Wire Transfer, Check(must clear before pick-up, could take up to 30 days) Paypal is accepted as a down payment only($250 Max) If you would like to know the exact specifications, you are responsible for obtaining that information prior to purchase. Don't assume that we have provided a thorough and detailed listing of every possible problem with the item. We may have missed something. Bear in mind that used equipment could always be a day away from breaking and our listing describes the equipment as of the day it was listed! You have 6 months to pick up your item ... morefrom the day the auction ends. After 6 months, you have forfeited your purchase and the machine will be sold to pay storage fees, and you will receive no refund of your purchase price. WE CAN GET YOU FINANCED!
|
|
Chipper Blades Morbark Eager Beaver Brush Bandit 100 150 200 7 14" cutter knives
2. 7 1/4" blades for Morbark Eager Beaver and Brush Bandit models 100 150 and 200 They were just sharpened so ready to install. Ships to the upper US 48 only
|
|
Morbark 1000 Diesel Tub Grinder Wood Grinder
Morbark 1000 Industrial Tub Grinder In full Working Condition New Screens installed New Teeth installed Comes with 2 Sets of screens: Coarse screen(installed) Fine screen(new in Box) Note: Need to sell by 8/2/13 And would be willing to take a best offer to get it sold by then. If you need a video of machine in working condition we can provide it. The machine is equipped with a drum magnet that separates out any iron that may be mixed it. We used the grinder to grind used pallets into usable mulch. We are no longer handling the volume of pallets we were before and no longer need the tub grinder. If you have any questions or concerns message me or call 1-912-531-7445. Thanks, Jeff General Information: Please don't assume. Ask before you bid/buy. Winning bidder/ purchaser of BIN's assumes all risk of liability with respect to the purchase ... moreof the product. We guarantee that this item will arrive exactly as described. All sales are final. We reserve the right to repair or replace the same item or refund the purchase price at our discretion. Return shipping shall be the responsibility of the buyer if a return is worked out through contacting us. In case of damaged parcel: Carrier might damage items during shipping. Please inspect the package well before accepting the shipment from the carrier. If you notice any damage to the box or the shipment. Please don't accept the parcel. To report a damaged parcel. Please contact us. We will follow up and file a"damage claim" with the carrier. All shipping. Packaging materials and boxes must be saved. Carriers will pickup the damaged item for inspection. Failure to provide everything necessary for us to file a damaged claim will void your claim. We can’t file a damage claim if you accept the shipment. Therefore. We are not liable for any damage if the shipment is accepted and/or we were not contacted within the time limit. Shipping: All orders are processed within 24 hrs of receipt of payment. The tracking number will be sent to you via e-mail when items are
|
|
VINTAGE MORBARK CHIPPER ID PLATE
YOU HAVE A VINTAGE CAST IRON ID PLATE FROM A MORBARK CHIPER. THE PLATE IS CAST IRON AND IS 12 IN LONG AND 6 IN. WIDE, AND 1/2 IN THICK. THE WEIGHT IS 6, LBS. THE PLATE IS MARKED MORBARK, WINN, MICHG MODEL#6-48 AND SER, W146, IT IS RAISED LETTERING AND ALL CAST IRON, THE CHIPPER WAS USED IN LOGING OPPERATIONS OVER 60M YEARS AGO, VERY NICE PIECE, IF YOU HAVE ANY QUESTIONS FEEL FREE TO MESSAGE ME THANKS FOR LOOKING
|
|
Morbark 290 12 inch chipper Cummins Diesel Engine
I am selling my Morbark 290 EEGER BEEVER CHIPPER. The chipper runs good with no problems. please call Chris at 219-781-7159 with any questions. I can deliver it for the cost of fuel within reason. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-1405d2a8be1-0x103-
|
|
Morbark Tow Behind Gas Wood Brush Chipper
Morbark chipper. 20hp kohler engine. Hydraulic feed. Runs and works as it should. Torsion axle. Newer tires and rims. 2 inch coupler. It was repainted Several years ago. It looks rough. Unit needs a paint job. I do not know the model or serial number. It appears that these Were painted over or removed when it was painted. It could use a little TLC. The two hydraulic hoses should be replaced. It needs a battery. It could use a new muffler. I think it Is a mid-1990s model. It is direct Belt drive no clutch. The chute turns 360°. It is a well-built heavy-duty chipper in a small package. Local pickup only I will not ship this. I recommend if you are going to haul this on a long distance to Put it on a trailer. It tows fine but I would not tow at high speeds. It starts up quick engine runs well does not smoke. It chips very well for a small ... morechipper. It is pretty tight has not been used commercially. There is no hour meter But it it has pretty low use for its age. It has been maintained well. Very simple chipper. Call me if you have any questions. 239-671-2890 Local pickup only Look at the pics close. What you see us what you get. I want the buyer to be happy with the chipper. If you don't like it when you come to pick it up I won't hold you to the deal. Must pay in person. Sold as is where is. Sale is final upon payment Posted with
|
|
Morbark Hurricane 18 Chipper 140hp Cat
2006 Morbark hurricane 18 chipper. 32 infeed rollers. Winch, 140 hp cat. 1500 hours. Extra knives. Runs good. No PayPal cash or certified check. Buyer can arrange shipping. Zip code is 43035 Posted with
|
|
Morbark Debarker
Complete Morbark Debarker. With in-feed and out-feed. Has been under cover whole life of unit. Will assist to load it.
|
|
Morbark 2060D Wood Chipper
Morbark 2060D wood chipper. Starts easy. Chips 4-5 inch diameter wood pretty easy. Will chip bigger slabs. Newer Koehler engine. Posted with Hydraulic feed with reverse. If you have questions or want more info. Please ask. http:youtu.be/wJQ3J5dd2aw
|
|
1998 Morbark 5237 Cat Diesel Woodhog Log/Wood Chipper/Grinder 750 Hp
1998 Morbark 5237 Cat Diesel Woodhog Log/Wood Chipper/Grinder 750 Hp WE HAD HER RUNNING AND SHE LOOKS GOOD. EMAIL OR CALL US FOR A COPY OF THE SPEC SHEET. MORE PICTURES BELOW. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 5237 SERIAL# 169-1025 OTHER: 750 HP CAT DIESEL OVERALL DIMENSIONS: WIDTH: 102" LENGTH: 39' HEIGHT: 13.3" OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19522) FACILITY. PICTURES: SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL ... moreINTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FRE
|
|
2001 Morbark 2755 Flail Chiparvestor chipper/grinder with bonus onsite support.
This chipper has three flail motors for debarking. An 83" four pocket wheel and a 27" throat. Wheel is curently set to run Iggesund tool knife system. Set up with mounted cab and grapple system for self feed. Operates with three 350hp(4160v) electric motors. 2 motors for chipper and 1 for hydraulics. Portable MCC trailer and all starter gear. Transformers, and panels to run 4160 and lower voltage equipment(air compressor, lights) This starter gear is mounted in a 48' dry van trailer. 2 spare 350 hp motors(rebuilt and running) a 53' dry van trailer with shelves. Lighting and spare parts(face plates, skins, flail chain, hydr. motors, and electrical) Optional and priced separately is a 1300 V-Mill hammer mill and short conveyors(one 350(4160v) hp motor. As a bonus we will provide free of charge. For buyers in a 400 mile radius ... moretechnical support in the form of a 2-3 man crew to go onsite to assist in connecting all electrical components and give instruction on start-up and operation. The technicians will stay on location until machine is operational and running.
|
|
MORBARK BEEVER CHIPPER ARBORIST FORESTRY CUMMINS 3.9
MORBARK BEEVER CHIPPER ARBORIST FORESTRY CUMMINS 3.9 Equipment. Condition: Used Make: Morbark Model: BEEVER Hours: 3059 Serial Number: 000-5094 Hitch Type: PINTLE Type: Wood Chipper Contact information. Aaron Deplazes 192 INDUSTRIAL PARK DRIVE PEARISBURG. VA 24134 Phone: 540) 599-0592 Email: adeplaze@gmail.com Description. MORBARK BEEVER CHIPPER MODEL: M12D BEEVER SERIAL: 000-5094 HOURS: 3059 CUMMINS 3.9 DIESEL ENGINE HP: 75 12" HYDRAULIC FEED PINTLE HITCH PLEASE GIVE US A CALL AT(540)921-2999 MON-FRI BETWEEN THE HOURS OF 8AM- 5PM EST OR GIVE AARON CALL AT(540)599-0592 WITH ANY QUESTIONS THAT YOU MAY HAVE OR IF YOU NEED A SHIPPING QUOTE. DUE TO PREVIOUS ISSUES WITH NON-PAYING BIDDERS. WE REQUIRE A $500 DEPOSIT WITHIN 24 HOURS. PLEASE CALL IF YOU HAVE ANY ISSUES WHEN MAKING YOUR DEPOSIT. FULL PAYMENT FOR THE ITEM IS DUE WITHIN 7 DAYS. ... moreIF YOU HAVE QUESTIONS ABOUT THIS ITEM, PLEASE CONTACT US BEFORE BIDDING OR BUYING. Photos. About Us. We are a Truck and Equipment Dealer that sells all types of trucks and heavy equipment.We are located in the Industrial Park in Pearisburg Va on us route 100. We are located at 192 Industrial Park Drive Pearisburg. Va 24134. We are aprox 30 miles off of Interstate 81 at exit 118b in VA and 25 miles off of Interstate 77 at exit 9 in WV.We have been in Bussiness over 20 years. We can arrange shipping on anything to anywhere in the world at very reasonable rates.We can and will help out any way we can on every sale! www.Worldwidequipment.com General Terms& Conditions. General Terms& Conditions: Deposit: Deposit of $500 must be paid within 24 hours of auction close. Payment: Items will not be available for pickup or shipping until full payment is received and cleared by our local bank. Buyer has 5 days to pay. Return Policy: If you are not satisfied with your equipment upon delivery. Please notify us immediately. Returns accepted within 5 days of purchase. You will be responsible for return shipping. Financing: We offer financing through eBays Equipment Financing program. Ava
|
|
2007 Morbark Cyclone 8 Towable Wood Brush Chipper Cat C1.5 33HP Diesel Repair
SKU: 640637 A: 0015000000oBU7i O: 0065000000OSz9r PA: Loading Video. or View Photo Gallery. Request Freight Estimate. View Financing Options. Equipment Appraisal. Location: Sacramento. CA 95691 Item Description. You are bidding on a 2007 Morbark Cyclone 8 Towable Wood Chipper in Parts And Repair condition. This unit is being sold as part of a standard fleet rotation package from a large material handling rental company and equipment dealer. It was regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Bid with confidence– ... more100% buyer satisfaction guaranteed and inspections always available. Low-cost shipping. Containerizing and port-access available for US and International shipping- for estimates click the Freight Quote Box below. Overview: Make: Morbark Model: Cyclone 8 Year: 2007 Hours: 193 original hours showing on working meter Title: None- sold with a bill of sale only Serial Number: 4S8SZ09137W086061 Transport Weight: approx. 3.000 lbs Transport Dimensions: 150" L) x 66" W)x 90" H) Features/Specifications: Direct Drive Automatic Feed System Pinned Chipper Hood Top Feed Wheel Compression System Folding Infeed Tray Loading Chute: 36" Feed Wheel: 11" W) 360 Degree Manual Swivel Discharge 2" Ball Coupler Spaded 7 Electrical Plug Safety Hooks RPM Gauge Engine Make: Cat Model: C1.5 Horsepower: 33 Fuel: Diesel Inspection Report Overview Comments Overall Appearance Good- see detailed photos Overall Operating Condition Cutting wheel is not functioning properly- all components appear to be intact Engine Starter Operational Exhaust System Good Cooling System Functional Fuel System Functional Oil Leaks None Fan/ Belts Good- normal wear Comments Engine runs well af
|
|
2008 Morbark 30/36 Drum Chipper 888 Hours Well Maintained
2008 MORBARK 30/36 DRUM CHIPPER- Low Hours Well maintained County Unit with 888 hours in excellent condition.36 diameter x 30 wide pocket drum chipper- One(1) top compression feed roll powered by a 6.000 Series hydraulic motor mounted over a 30 x 6 track chain complete with one(1) 6,000 Series hydraulic motor drive- Tandem axles, 24,000 pounds leaf spring suspension with LT235/85R16 on 16 rim x 6 bold radial tires, pintle hitch, air brakes and lights to ICC specifications- Hydraulic powered stabilizer- 102 gallon hydraulic tank- 143 gallon fuel tank-Model 150M Hydraulic Knuckleboom Loader with 14 extended boom, 180 degree swing, Model 649 Bypass grapple with 360 degree continuous rotation. Stationary operator s cab and console, complete with joystick controls, Red Dot air conditioner/heater, four-way adjustable seat, engine gauge panel, emergency ... moreshut-down system, color tinted safety glass with steel guard-Swivel chip discharge chute controlled from operator s cab OPTIONAL EQUIPMENT-Caterpillar C13, Tier III, 440-HP electronic diesel engine complete with Rockford SP314 side-load spread bearing clutch-Electronic RPM sensor-Morbark reversing fan-Chipper equipped with six(6) babbited knives in a 2-knife configuration-Halogen light package-Saylor-Beall air compressor, completely self contained, equipped with 11-HP Honda motor, 30 gallon horizontal air tank Chipper inspection and demo on appointment only. This is a used machine and is sold as is. Willing to do demonstration For more information on this vehicle call our eBay Trader Assistant at Featured Network 1-800-576-1645 or e-mail us at info@featurednetwork.net please include the eBay item number in your requests. We are sorry but because we have had non paying bidders who never contact us, we must ask anyone who has negative or no feedback to contact us BEFORE they bid. Otherwise we will cancel the bids placed. Please note mileage may vary from listing a couple of hundred miles due to road tests. The seller shall not be responsible for the correct descript
|
|
2006 MORBARK 2400 CHIPPER WOOD CHIPPER DEBRIS CUMMINS DIESEL ENGINE
PLEASE CALL 240-203-0689 OR 304-279-9744 WITH ANY QUESTIONS MORBARK 2400 2006 MODEL YEAR LOOK AT THE PICTURES. THE CONDITION IS GREAT CUMMINS DIESEL ENGINE 18 INCH FEED HYDRAULIC INFEED ROLLER PINTLE HITCH SERIAL 4S8SZ1810WW003310 LOW HOURS 1337 HOURS COMPARE THESE ONLINE AT OVER 50000 DOLLARS THIS ONE SELLS NO RESERVE TO HIGHEST BIDDER CHIPPER IS FOR SALE LOCALLY. PLEASE CALL 1-304-279-9744. WITH ANY QUESTIONS. WE ARE NOT RESPONSIBLE FOR TYPOS. PLEASE LOOK AT THE PICTURES AND VIDEO OF EQUIPMENT WE PROVIDE ALL EQUIPMENT IS SOLD AS IS WHERE IS WE HAVE A RETURN POLICY BUT CUSTOMERS IS RESPONSIBLE FOR SHIPPING BOTH WAYS. NO EX CEPTIONS! For shipping quotes call Mac at 816-373-0045 Mac Mc Michael. Manager aaaTruckFinders-Midwest office: 816-373-0045 fax: 816-373-7194 cell: 816-489-0859 PAYMENT: A NON- REFUNDABLE DOWN PAYMENT MUST BE RECEIVED ... moreWITHIN 24 HRS OR YOU MUST CALL TO MAKE PAYMENT ARRANGEMENTS. WE DO NOT EXECPT PAYPAL FOR PAYMENT IN FULL! PAYMENT IN FULL MUST BE RECIEVED WITHIN 3 DAYS OF CLOSE OF AUCTION OR ITEM WILL BE RELISTED! NO EXCEPTS PERIOD. ALL ITEMS MUST BE PAID IN FULL BEFORE P/U! WE ACCEPT VISA.MASTERCARD AND DISCOVER AND PAYPAL FOR DOWN PAYMENT ONLY. WE EXCEPT CHECKS.CASHIER CHECKS AND WIRE TRANSFERS FOR PAYMENT IN FULL. BUT ALL CHECKS MUST CLEAR THE BANK B/4 YOU CAN P/U OR HAVE YOUR ITEM SHIPPED.WE HAVE FOUND THAT WIRE TRANSFER IS THE EASIEST AND SAFEST METHOD OF PAYMENT. SHIPPING: We SHIP WORLDWIDE. SHIPPING IS THE SOLE RESPONSIBILITY OF THE HIGH BIDDER. I WILL HELP WITH SHIPPING ANY WAY I CAN. WE WILL LOAD THE ITEM AT MY FACILITY AT NO CHARGE TO YOU. WE HAVE FORK LIFTS AND DOCKS FOR LOADING. YOU MAY PICK THE ITEM UP IN PERSON IF YOU PREFER. YOU MAY ALSO USE ANY CARRIER OF YOUR CHOICE. CALL US AND WE WILL GIVE YOU A LIST OF GOOD CARRIERS TO CHOSE FROM.SHIPPING IS THE SOLE RESPONSIBILITY OF THE WINNER OF THIS AUCTION! WINNING BIDDER PAYS FOR ALL SHIPPING CHARGES PERI OD! For shipping quotes call Mac at 816-373-0045 Mac Mc Michael. Manager aaaTruckFinders-Midwest office: 816-373-0045 fa
|
|
Wood chipper morbark 10/36 tree chipper chip bagger mulcher gas kohler
Morbark wood chipper. 25 horsepower kohler engine.either blows or bags chips.pick up 20 miles north of phila.
|
|
1997 Morbark 2348 Horizontal Grinder Chip Harvestor
1997 Morbark 2348 Horizontal Grinder Location: Portland Oregon Horizontal feed rollers flail unit V12 Caterpillar engine disc chipper knife system adjustable bed knife adjustable discharge chute for chipper three axle system. New tires side conveyor discharge more lift 500 hydraulic grapple fold up. Cab joystick control two platform outriggers hydraulic control pane Shipping Quotes. Nation wide trucking and WORLD Wide Shipping rates available on request Questions? Offers. Please e-mail or Call for details.503-545-0007 Serious Buyers and Winning Bidders Some type of Contact is Required with in 72 hours To Secure Sale* This item is also Advertised in other Publications. First come First Serve. DON'T WAIT BID Today.
|
|
1992 Morbark 1000 Tub Grinder Cat Diesel Engine
1992 Morbark 1000 Tub Grinder Small But Powerful perfect for lower volume applications. Cat Diesel Engine. Good Hammermill system. Screen. Auger Discharge onto rear folding Conveyor Shipping Quotes. Nation wide trucking and WORLD Wide Shipping rates available on request Questions? Offers. Please e-mail or Call for details.503-545-0007 Serious Buyers and Winning Bidders Some type of Contact is Required with in 72 hours To Secure Sale* This item is also Advertised in other Publications. First come First Serve. DON'T WAIT BID Today.
|
|
2003 Morbark 270XL Twister Tree Chipper
2003 Morbark model 270XL Twister trailer mounted wood chipper serial# 70198 10"capacity with auto feed has a 4BT cummins power unit showing only 1700 hrs starts and runs excellent. No smoke, 90psi oil pressure comes with safety operation. Service and parts manuals has 1 brand new tire. Trailer lights and brakes weighs 4.000 lbs unit is 100% functional and is ready to go to work. Was just serviced and repainted feel free to come check it out. Try it out before you bid. contact Ryan@ 636-221-6781 with any questions or to schedule a time to look it over. thanks for looking and happy bidding. unit is sold as-is where-is $500 non-refundable deposit required 24hr after auction closes.
|
|
2003 Morbark 2400 XL
Selling our 2003 Morbark 2400 XL with upgraded 260HP Cummings Turbo Diesel Engine. Strong engine with 2.460 hours, no oil leaks, in brand new condition. 3,500 pounds of downward crushing power at the push of a button to eliminate cutting inside of feed table. Everything on this machine has been completely serviced from top to bottom. Full Spec/Service list of everything that has been done to machine available upon request. Video below of chipper in action. Auction is for Pick Up Only. Feel free to contact us with questions at Email: tree@advtree.com Office Phone: 252) 449-4148 Grapple Chipper with 150 Morlift Loader, 125' Hydraulic Winch, Auto Feed System, Hydraulic Jack, Hydraulic Chute, Dual Rear Hydraulic Rear Jacks
|
|
Ford Morbark diesel chipper
Ford Morbark diesel hydraulic chipper model 290.forward and reverse self feeding.14×20 inch opening.2364 hours on motor.will fire rite up on first turn.8000 cash firm.call John 863 344 0248
|
|
MORBARK 290 CHIPPER JOHN DEER DIESEL HDY FEED ONE QWNER!!!!
MORBARK 290 chipper hdy feed john deer diesel 3340 hr. in good working conditidon.One owner well maintane! Call bob for more information(810)6299376
|
|
Morbark Tub Grinder Model 1050
This 10-foot tub grinder is powered by a 500 hp CAT Diesel engine. Grinder has under 3.600 hours of use on it, grapple loader, fixed hammers, tilt tub, and magnet. Outfeed conveyor is 30 foot long. This grinder is ready to go to work, call today for more details! Payment by PayPal. Wire transfer, certified funds, or company check(10 days hold on company checks) Payment should be received within 10 days of auction end or item will be relisted unless other arrangements have been approved. Availibility subject to prior sale from other sales efforts. W-02577. We will ship anywhere in the world. Buyer to arrange and pay for all transportation from FOB point. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
morbark 1300 clutch and gear box
1300 gear box palletized and warped off of working machine in good working condition email for pitchers liwoodshavings@yahoo.com or call 15165232170
|
|
Wood Chipper Part Vickers Eaton Live Hydraulics Pump Morbark Brush Bandit Altec
Vickers eaton hydraulic pump off a morbark model 13 fits many others. Came off a cat Perkins 2181. Fits many morbark. Carlton woodchuck choppers. If you don't need it buy it and put it on the shelf for a spare. This price is cheap! Has 1819 hours on it. We ship to the USA upper 48 Posted with
|
|
Morbark Tree Shear Wood hydraulic Equipment Attachment
Morbark Wood Tree Shear Hydraulic Equipment Attachment In very good condition. Shipping Quotes. Nation wide trucking and WORLD Wide Shipping rates available on request Questions? Offers. Please e-mail or Call for details.503-545-0007 Serious Buyers and Winning Bidders Some type of Contact is Required with in 72 hours To Secure Sale* This item is also Advertised in other Publications. First come First Serve. DON'T WAIT BID Today.
|
|
Morbark Beever Chipper, ford motor, hdy feed, low hours, ready for work!!!!
Morbark Beever chipper hdy FEED. Newer 4 cyl ford motor,1600 HOURS in good working condition, well maintane! Call bob for more information(810)6299376
|
|
1996 MORBARK CHIPPER MODEL 10, WOOD CHIPPER, MORBARK CHIPPER, CHIPPER
1996 MORBARK CHIPPER MODEL 10 SERIAL NO. TWO21368 6567 HOURS GAS FORD 4 CYLINDER NEW PAINT JUST SERVICED& READY TO GO! This Morbark Chipper is located in Blacklick(Just minutes from I-270 in Columbus) Ohio and we encourage you to come by and take a look at this piece of equipment! You may contact us at(614) 864-4994. Thank You! THIS EQUIPMENT/ITEM IS CURRENTLY FOR SALE ON OUR SALES LOT. WE RESERVE THE RIGHT TO SELL AT ANYTIME! E Bay purchasing: We advise all potential buyers to fully read and understand all of the information below before bidding. Please read all of this information and understand the terms and conditions outlined below. Most of the questions you will have will probably be answered below. Saving time. If after reading below you still have questions, please call us and we will attempt to resolve any outstanding issue, ... morequestion, or problem. What you are buying: You are buying used farm equipment/items and or construction equipment/items. We do not sell new equipment/items. We purchase equipment/items from used equipment sources and resell. You should keep that in mind when you are bidding on an item. We describe all equipment/items to the best of our ability. We are not experts with each item/ equipment we sell. But we explain it the best we can and will attempt to answer questions you may have. Machine Specs: All information we provide for items such as: Serial numbers. Weights, horsepower, and lift capacities, is taken from sources generally deemed to be accurate. We do not guarantee this information, however we provide it as help to you. We may describe that a machine is supposed to lift 5,000 pounds, but if it only lifts 3,000 pounds it is not our fault and we did not guarantee that. Likewise, if we tell you we believe a machine is a 1997 and it is a 1995 model, we have not guaranteed the year as sometimes we have no way of verifying. If these things are that important to you and if they will influence your decision to purchase, you should call the manufacturer yourself or do your own rese
|
|
Morbark Wood Tree & Brush Chipper Hydraulic Feed Wheel Lift Assembly Cylinders +
Hydraulic feed wheel lift cylinders and hoses for a morbark chipper. Off a model 17 fits others. We ship to the 48 upper USA states Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14327f223ab-0xf4-
|
|
Morbark 2400 XL whole tree chipper, bio mass chipper, International 4900 4x4
This is a custom built Morbark 2400 xl self feeding truck mounted whole tree chipper. The chipper is a 2003 morbark 2400 xl with a 250 hp John Deere diesel with auto feed auto reverse. It has mounted on it a 12' feed table and a 21' hydraulic self loading arm. The truck is an International 4900 4x4 with a brand new allison auto transmision. This unit has way to many extras to list. If you are intersted or have an offer please don't hesitate to call me. 541-621-9009
|
|
Morbark 4000P mulch colorizer
2000 Morbark 4000P mulch colorizer. 730 hours. Powered by 80 HP Cummins. Very good operating condition. Will color up to 200 yards per hour. Will consider free delivery within 250 miles of 44255 zip code.
|
|
MORBARK 6 Inch Disk Chipper Self Feeder MODEL 2060-D
0 0 1 235 1346 Ixcouncil 11 3 1578 14.0 Normal 0 false false false EN-US JA X-NONE MORBARK 6 Inch Disk Chipper Self Feeder MODEL 2060-D for sale. Equipment Specifications: Year 2004 Manufacturer MORBARK Model 2060-D Engine Type Cat Diesel Horse Power 33 HP Condition Used Hours 1165 Serial Number 4S8SZ091 04W0 60366. Brief Description: We recently used this Chipper for one of the local projects. This 2060-D Model performs. And Runs great. You will absolutely love this Chipper and its performance. The feed rollers are sharp and go in forward and reverse positions. Tires are in good condition we just had it out and this thing tows down the road smoothly. We have Operators Safety Manual. Parts Manual that comes with the unit. The following work has been performed before we place it on eBay: New hydraulic and oil& filters were installed. Replaced ... moreall fluids. Sharpened Feed Rollers. SHIPPING: Local pickup or buyers arrange shipping: We will also deliver within 100 Mile Radius of ZIP 17225. Please contact us for quote and further info: We have also have equipment here to load it on your trailer. Payment Options: We accept Cashiers Checks. Money Orders, and Wire Transfers PayPal. Questions: Please don’t hesitate to contact us with any questions you might have about this product. Also if would like to schedule a live demonstration before you place a bid, we will gladly make arrangements for you to come to our facility in GREENCASTLE Pennsylvania. Communication is the key so please contact us anytime. You can message us here or call Denis 240-405-5151. We appreciate your interest and time.
|
|
2005 MORBARK 30 RXL WHOLE TREE CHIPPER
2005 MORBARK 30 RXL WHOLE TREE CHIPPER V-12 CAT MOTOR CAB WITH HEAT AND AIR READY TO WORK LUTKE EQUIPMENT LLC 606 RW HARRIS DR MANTON MI 49663 CALL 231-824-9505 AFTER 5PM 231-590-1711
|
|
2010 MORBARK M15R CHIPPER; CAT 142 HP TEIR III ENGINE
2010 MORBARK M15R Chipper 15" capacity CAT 142 HP TEIR III ENGINE EXCELLENT CONDITION ONLY 260 Hours Posted with
|
|
wood chipper Murphy Gauge Tach Hour Meter Shut Down Panel Brush Bandit Morbark
Murphy panel off a bandit chipper. Has tach. Hour meter, oil pressure, volt and temp. Also key switch and wire harness. We ship to the upper USA 48 states Posted with
|
|
wood chipper part Morbark Model 17 Feed Wheel Drive Cog Gears Chain Sprocket
Used feed wheel drive sprockets and chain. Off a model 17 and will fit some others. We ship to the upper USA 48 Posted with
|
|
Wood chipper safety bar forward reverse control morbark 17 bits others tree tool
This control bar is off a model 17 morbark and fits other models and other chippers. It's 66" wide and 42" high. Condition is good. Used, nothing broken and no repairs. Pick up or send your shipper to central bucks county pa Posted with
|
|
wood Tree Chipper Feed Table upgrade From Folding Heavy Duty Morbark Bandit Etc
Feed table off a morbark 17 will fit many models with fabrication. The feed roller part you will need to have cut off to weld to your unit. Cash only pickup in central bucks county pa Posted with
|
|
wood Tree Chipper Morbark Model 17 13 1200d Others Draw Bar Pintle Ring Chains
Morbark drawbar off a model 17. Complete with morbark mounting hardware and safety chains. Call morbark to see if it fits your model. Pick up with cash in hand in central bucks county pa. Buyer must have cash in hand to pick up part. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-143b02b30ec-0xd9-
|
|
Morbark Model 17 Wood Tree Chipper Feed Roller Wheel Assembly Bearings Housing
Feed wheel roller assembly off a morbark model 17. If your roller is worn cracked or bent here's a cheap way to fix it. A bolt on application. There is a few grand in parts here at the dealer. Even if you don't need it now. Buy it for later. Pick up in central bucks county pa. Buyer must have cash in hand for pickup. No p pal Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-143b02b3057-0xf5-
|
|
Morbark Eeger beever chipper no reserve!!!
You are considering a morbark eeger beever 12in capacity hyd feed chipper with a four cylinder continental gas engine. It has a rebuilt carb and a new starter.Alternator,battery&cables,ignition switch,led lights,leaf springs,and a new jack etc. The chipper runs and chips great starts right up and everything works as it should it also comes with a new set of knives. The only reason i am selling it is because i updated my equipment it was my spare unit i already sold the truck so i have no use for it anymore the only thing i've noticed is that the rear main seal leaks a little bit after long use if you have any questions please feel free to call me@419)367-9571. THIS IS A NO RESERVE AUCTION! HOWEVER I HAVE THE RIGHT TO END THIS AUCTION AS THIS ITEM IS FORSALE LOCALLY AS WELL.THANKS AND GOOD LUCK!
|
|
2004 Morbark 2400XL Hurricane, Brush / Wood Chipper
2004 Morbark 2400XL Hurricane Brush Chipper. 250HP John Deere turbo-diesel engine. Will chip up to 21" logs. Less than 800 Hours! Hydraulic tongue jack and discharge chute. Kept inside when not in use. Free Local pick up after money is cleared. Buyer is responsible for any other shipping arrangements.
|
|
Morbark 3600 Grinder - good for storm, landscaping, and demo clean up
For sale is a Morbark 3600 Wood Hog Grinder being sold by one and ONLY owner This machine was only used to grind mulch but can be used for so much more including: grinding yard waste. C&D debris, storm debris, pallets, and many other types of wood waste. Year: 2000 Engine: 525 HP John Deere Hours: appx 7500 hrs Has a magnetic head pulley Comes with extra screens& inserts Tires. Chains& belts are all in good condition and ready to work Machine can be demonstrated if wanted- serious inquiries only Asking $100.000 but willing to negotiate Payment by PayPal. Wire transfer, certified funds, or company check(10 days hold on company checks) Payment should be received within 10 days of auction end or item will be relisted unless other arrangements have been approved. Buyer responsible for arranging and paying for all transportation and ... moreshipment. Any questions please feel free to ask and thanks for looking!
|
|
Morbark 1300 Grinder -good for landscaping, storm debris, demo clean up
For sale is a Morbak 1300 Grinder being sold by owner Used mainly for mulch grind and regrind Length of Tub is 13 foot Engine Size is 750hp Cat 3412 Diesel Engine- New engine was installed in August of 2009 Drive motors were recently replaced Can grind material up to 320 yards per hour Grinder can be used for grinding trees. Stumps, pallets, brush, C&D debris, storm clean up and so much more. Grinder has been well maintained with regular and up to date maintenance. Grinder comes with inserts. Hammers, and 2 sets of screens(1" 4" Machine is ready to go to work today and can be demonstrated if wanted- serious inquiries only Asking $160.000 but willing to negotiate Payment by PayPal. Wire transfer, certified funds, or company check(10 days hold on company checks) Payment should be received within 10 days of auction end or item ... morewill be relisted unless other arrangements have been approved. Buyer responsible for arranging and paying for all transportation and shipment. Any questions please feel free to ask and thanks for looking!
|
|
Morbark/ Michigan Kinfe Sharpener/Grinder
Morbark/ Michigan Kinfe Sharpener/ Grinder Mk 40 12 Carbide Model- 12 CABD Serial- 1231 Size: 40 Volts: 230/460 Was Used Mainly to Sharpen Waste Recycler Knives* Buyer Pays for Shipping. Can Help Arrange Shipping. Any Question fell free to contact me. Posted with
|
|
wood chipper part Morbark Model 17 Feed Wheel Roller Carrier Hinge Wear Pins
Morbark model 17 feed wheel carrier pins. Used in good condition. No measure able signs of wear. We ship to the upper USA 48 states Posted with
|
|
MORBARK MODEL 17 WOOD CHIPPER 17" NEW ENGINE WILL SHIP HEAVY DUTY TURBO DIESEL
IF YOUR LOOKING FOR A GREAT HEAVY DUTY CHIPPER THIS IS IT.ONLY HAS 1700 HRS.THE NEW ENGINE ONLY HAS 200 HRS ON IT.IT IS A JOHN DEERE TURBO DIESEL.MACHINE HAS A MASSIVE 17 INCH CAPACITY.IT IS A HEAVY WELL BUILT MACHINE THAT DESTROYS ANYTHING THAT GETS PUT IN IT.IT HAS TAILLIGHTS AND A PINTLE HOOK.GOOD TIRES READY TO WORK.I WILL SHIP AT THE BUYERS EXPENSE.ANY QUESTIONS PLEASE EMAIL OR CALL 847-736-5015. PAY PAL IS FOR A $200.DEPOSIT ONLY.BALANCE WILL BE DUE IN CASH OR WIRE TRANSFER.
|
|
Morbark Model 17 Wood Tree Chipper Feed Wheel Roller Springs Matched Set
This is a matched used set of feed wheel carrier springs. It's good to have spares. Off a model 17 may fit others. We ship to the upper USA 48 Posted with dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-143bcda24eb-0xf9-
|
|
Morbark Tub Grinder Grates Set Of Two
Morbark Tub Grinder Grates Set of 2 Grate With Rectangular Holes is New and Never Been Use Wear from Storage Dimensions: 27 3/8" x63 3/8" Slots Dimensions: 6"x3" Thickness of Grate- 1" Grate With Circular Holes Has Been Lightly Used Wear From Storage Dimensions: 28"x 63 3/8" Slot Dimensions: 3" Round Holes Thickness of Grate: 1" Posted with
|
|
Morbark wood chipper model 2060- kohler engine force feed 2004 model recent ovhl
Morbark model 2060-D wood chipper low hours recent engine overhaul kohler gas works great. Can arrange shipping and delivery call Tom with any details 320-248-0930
|
|
2005 Morbark 2400XL Brush Chipper with Loader
Compact. Powerful and very affordable 18″ capacity chippper with self-contained loader. Can also be hand fed. Powered by a 250HP Cat turbo diesel and equipped with hydraulic swivel discharge chute, auto-feed system and front& rear hydraulic stabilizers. Pictures taken before repairs made. In addition to standard service, scheduled repairs include new control bar and linkage, new chipper drum bearings, new chip deflector& new relay box for loader platform. P lease call Matt or Steve at 630/663-1400 for more info. We usually ship within one business day following cleared payment. We charge actual shipping and handling charges. E-mail your zip code and we will verify actual shipping cost. We will gladly combine shipping. Financing is available on all items over $5.000. Payment is appreciated within 5 business days after item ends. Unpaid ... moreitems will be filed after that. Illinois residents pay 7.25% sales tax. WI, MI, IN& IA residents are also subject to sales tax. Alexander Equipment is a full service dealer for Morbark Brush Chippers. Tub Grinders& Whole Tree Chippers, J.P. Carlton Stump Grinders, Boxer Mini-Skid Steers, Timberwolf Log Splitters, Firewood Processors, FAE Forestry Mowers and Stihl Power Products. We also maintain an impressive selection of Arborist Supplies including climbing ropes, carabiners, snaps, pulleys, saddles, lanyards, climbing spikes& accessories, pruning equipment, cabling equipment, safety gear and much more. Alexander Equipment. Inc. 4728 Yender Ave. Lisle. IL 60532 Phone: 630) 663-1400 Fax: 630) 663-9754
|
|
Morbark Tree Shear Hydraulic Logging Equipment Attachment
Morbark Tree Shear Hydraulic Equipment Attachment In very good condition. Shipping Quotes. Nation wide trucking and WORLD Wide Shipping rates available on request Questions? Please e-mail or Call for details.503-545-0007 Serious Buyers and Winning Bidders Some type of Contact is Required with in 72 hours To Secure Sale* This item is also Advertised in other Publications. First come First Serve. DON'T WAIT BID Today.
|
|
2010 Morbark M15R Brush Chipper
Aggressive 15″ capacity chipper powered by a 140HP John Deere Turbo Diesel and equipped with dual horizontal feed rollers. Hydraulic down pressure for maximum crushing power and reversing auto-feed. Only 1,561 hours! Fully serviced and ready to chip now. P lease call Matt or Steve at 630/663-1400 for more info. We usually ship within one business day following cleared payment. We charge actual shipping and handling charges. E-mail your zip code and we will verify actual shipping cost. We will gladly combine shipping. Financing is available on all items over $5.000. Payment is appreciated within 5 business days after item ends. Unpaid items will be filed after that. Illinois residents pay 7.25% sales tax. WI, MI, IN& IA residents are also subject to sales tax. Alexander Equipment is a full service dealer for Morbark Brush Chippers. Tub ... moreGrinders& Whole Tree Chippers, J.P. Carlton Stump Grinders, Boxer Mini-Skid Steers, Timberwolf Log Splitters, Firewood Processors, FAE Forestry Mowers and Stihl Power Products. We also maintain an impressive selection of Arborist Supplies including climbing ropes, carabiners, snaps, pulleys, saddles, lanyards, climbing spikes& accessories, pruning equipment, cabling equipment, safety gear and much more. Alexander Equipment. Inc. 4728 Yender Ave. Lisle. IL 60532 Phone: 630) 663-1400 Fax: 630) 663-9754
|
|
1996 Morbark 2400 Brush Chipper
Affordable and very well maintained Village Trade-in. Powered by a 115HP John Deere Turbo diesel engine. 18″ log capacity and extra-wide feed opening. Fully serviced and ready to work now! P lease call Matt or Steve at 630/663-1400 for more info. We usually ship within one business day following cleared payment. We charge actual shipping and handling charges. E-mail your zip code and we will verify actual shipping cost. We will gladly combine shipping. Financing is available on all items over $5.000. Payment is appreciated within 5 business days after item ends. Unpaid items will be filed after that. Illinois residents pay 7.25% sales tax. WI, MI, IN& IA residents are also subject to sales tax. Alexander Equipment is a full service dealer for Morbark Brush Chippers. Tub Grinders& Whole Tree Chippers, J.P. Carlton Stump Grinders, Boxer ... moreMini-Skid Steers, Timberwolf Log Splitters, Firewood Processors, FAE Forestry Mowers and Stihl Power Products. We also maintain an impressive selection of Arborist Supplies including climbing ropes, carabiners, snaps, pulleys, saddles, lanyards, climbing spikes& accessories, pruning equipment, cabling equipment, safety gear and much more. Alexander Equipment. Inc. 4728 Yender Ave. Lisle. IL 60532 Phone: 630) 663-1400 Fax: 630) 663-9754
|
|
2009 Morbark M20R Brush Chipper with Loader
Coming Soon! Aggressive and well maintained Village trade-in with less than 800 hours! Powered by a 325HP Cat Turbo Diesel engine and equipped with a Morbark 150 loader. Winch, hydraulic swivel discharge chute, hydraulic front and rear stabilizers& reversing auto-feed. Price includes full servicing before sale. Unit will be available in mid February. More detailed pictures available soon. P lease call Matt or Steve at 630/663-1400 for more info. We usually ship within one business day following cleared payment. We charge actual shipping and handling charges. E-mail your zip code and we will verify actual shipping cost. We will gladly combine shipping. Financing is available on all items over $5.000. Payment is appreciated within 5 business days after item ends. Unpaid items will be filed after that. Illinois residents pay 7.25% sales ... moretax. WI, MI, IN& IA residents are also subject to sales tax. Alexander Equipment is a full service dealer for Morbark Brush Chippers. Tub Grinders& Whole Tree Chippers, J.P. Carlton Stump Grinders, Boxer Mini-Skid Steers, Timberwolf Log Splitters, Firewood Processors, FAE Forestry Mowers and Stihl Power Products. We also maintain an impressive selection of Arborist Supplies including climbing ropes, carabiners, snaps, pulleys, saddles, lanyards, climbing spikes& accessories, pruning equipment, cabling equipment, safety gear and much more. Alexander Equipment. Inc. 4728 Yender Ave. Lisle. IL 60532 Phone: 630) 663-1400 Fax: 630) 663-9754
|
|
Morbark Wood Tree Chipper Model 17 & Others Feed Wheel Roller Safety Cover
Feed wheel cover off a morbark 17 may fit others. Pick up in central bucks county pa Posted with
|
|
2005 Morbark 13 Brush Chipper
Excellent running condition with 125HP John Deere Turbo diesel! This unit is currently being fully serviced with a new chipper drum. Shaft, bearings, feed control bar, knives, fluids and filters. In addition, any other parts more than 50% worn will be replaced and all hydraulic pressures re-set to original factory specifications. We are a factory authorized Morbark dealer. Can be painted to your color for an additional $2,450. P lease call Matt or Steve at 630/663-1400 for more info. We usually ship within one business day following cleared payment. We charge actual shipping and handling charges. E-mail your zip code and we will verify actual shipping cost. We will gladly combine shipping. Financing is available on all items over $5.000. Payment is appreciated within 5 business days after item ends. Unpaid items will be filed after that. ... moreIllinois residents pay 7.25% sales tax. WI, MI, IN& IA residents are also subject to sales tax. Alexander Equipment is a full service dealer for Morbark Brush Chippers. Tub Grinders& Whole Tree Chippers, J.P. Carlton Stump Grinders, Boxer Mini-Skid Steers, Timberwolf Log Splitters, Firewood Processors, FAE Forestry Mowers and Stihl Power Products. We also maintain an impressive selection of Arborist Supplies including climbing ropes, carabiners, snaps, pulleys, saddles, lanyards, climbing spikes& accessories, pruning equipment, cabling equipment, safety gear and much more. Alexander Equipment. Inc. 4728 Yender Ave. Lisle. IL 60532 Phone: 630) 663-1400 Fax: 630) 663-9754
|
|
Morbark 2400 chipper knives
I have a total of 5 chipper knives for Morbark 2400. May fit other brands or sizes. There is one set of resharpened knives and one new. Unused knife. You cab see in the picture that the resharpened knives are almost like new. Selling as 1 lot of 5 knives.
|
|
2012 Morbark G42SP Stump Grinder (Ness Turf 008)
Th is is a 2012 Morbark G42SP Stump Grinder. Please contact Leonard Smith at 808.486.8301 office or 808.348.9900 mobile or lsmith@nessturf.com for more information on this eBay item. eBay items are sold'as-is' Financing options are available. FOB Shipping Point. Unit is located in Hawaii. Ness Turf Equipment offers the best selection of ag and turf equipment in Hawaii. Guam, American Samoa and Saipan. Learn more about our services including sales, rentals, parts and service and to view our expanded product line of high quality ag and turf equipment for golf courses. Sports fields, and state and federal municipalities. Can't find what you are looking for on our eBay store? Ness Turf Equipment can source a nationwide network of high quality new and used equipment for your next job. Get the right piece at the right price when you ... morebuy from Ness Turf Equipment. Contact Leonard Smith today!
|
|
Morbark 1300 Tub Grinder Wood Waste Recycling
This 1996 13-foot tub grinder is powered by a 3412 800 hp CAT Diesel engine. Unit has air compressor and magnet. Screens are demolition size. There are 4600 hours on frame and engine. Unit was used recently for a land clearing job and is available immediately. Payment by PayPal. Wire transfer, certified funds, or company check(10 days hold on company checks) Payment should be received within 10 days of auction end or item will be relisted unless other arrangements have been approved. Availibility subject to prior sale from other sales efforts. W-02670. We will ship anywhere in the world. Buyer to arrange and pay for all transportation from FOB point. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
MorBark Industries Inc. Chiparvester Watch Fob
MorBark Industries Inc. Chiparvester Watch Fob sticker on back discolored
|
|
|