In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
299.99
Buy It Now
$16.47 Shipping
Condition: Used
Location: Brazil, United States
This works and Chuck turns well and Chuck key is in good condition.
$
164.95
Buy It Now
$5.95 Shipping
Condition: Used
Location: Shelbyville, United States
A USED ALBRECHT KEYLESS DRILL CHUCK WITH SENSITIVE FEED ARBOR. THIS KEYLESS DRILL CHUCK w/ SENSITIVE FEED ARBOR IS IN GOOD WORKING CONDITION. THE CHUCK ... moreMOVES SMOOTHLY AND FREELY. THE SPRING LOADED SENSITIVE FEED ALSO WORKS NICELY, EXTENDING AND RETRACTING AS IT SHOULD.
$
299.99
Buy It Now
Condition: Used
Location: North Royalton, United States
Photos are of actual part and /or vehicle from which it was removed. Our products are used and may have light scratches, scuffs, spots or minor flaws. ... moreWE WILL TRY TO WORK OUT ANY PROBLEMS YOU MAY HAVE HAD WITH YOUR ORDER.
$
125.00
Buy It Now
$8.74 Shipping
Condition: Used
Location: Gainesville, United States
Chuck is pre-owned in excellent overall condition with very little wear. Works as it should.
$
325.00
Buy It Now
$43.38 Shipping
Condition: Used
Location: Feasterville Trevose, United States
DUMORE HI-SPEED SENSITIVE DRILL 16-021, WORKS FINE. INCLUDES THE DRILL CHUCK. 17,000 RPM.
$
129.99
Buy It Now
$12.50 Shipping
Condition: Used
Location: Joshua, United States
Tested and in good working condition.
$
219.95
Buy It Now
Free Shipping
Condition: Used
Location: Davenport, United States
$
1199.95
Buy It Now
$90.13 Shipping
Condition: Used
Location: Boyertown, United States
Mr. Muehlmatt died in 1937 and his assets were acquired by the Hamilton Tool Co. Patented in 1924 by Adolf MuehlmattCincinnati, Ohio. The wiring is pretty ... moresketchy but the machine turns on and seems to function properly.
$
425.00
Buy It Now
Free Shipping
Condition: Used
Location: Jackson, United States
Is in good working order , all speeds seem to functionas they should. Has wear , scratches , dings and rust (cam be seen in photos ). Base and head may ... morebe shipped separately to lower cost of shipping, so buyer will receive two tracking numbers apon shipment. See photos for size and visual.
$
999.99
Buy It Now
Free Shipping
Condition: New
Location: Gilbert, United States
Chuck is included. We will work to resolve issue promptly.
$
400.00
Buy It Now
$139.70 Shipping
Condition: Used
Location: Vancouver, United States
Good condition dual speed, high speed Dumore Sensitive Drill Press. (See pictures). The base of the drill press is VERY sturdy and heavy.
$
2000.00
Buy It Now
Condition: Used
Location: Lenapah, United States
(30) Sigourney Tool Sensitive Drill Operation Test - YouTube. It is supposed to have 3 spindle speeds, but the rear pulley has been changed to 1 setting. ... moreHas Jacobs No. 1A Drill Chuck Capacity is 0 - 1/4".
$
600.00
Buy It Now
Condition: Used
Location: Coffeyville, United States
HAMILTON VARIMATIC DRILL PRESS. ALBRECHT CHUCK SIZE - 1/8". TABLE BORE SIZE - 1/4". CYCLE - 60. TABLE SIZE - 7-1/4" X 8-1/8". YOU WILL RECEIVE WHAT IS ... morePICTURED, NOTHING LESS NOTHING MORE.
$
449.99
Buy It Now
$12.00 Shipping
Condition: Used
Location: West Covina, United States
Shank Mount: J0. Made in Germany by Albrecht. 1/2" straight shank for ease of use in your machine with collet or chuck. This is a lightly used Hi-Precision ... moreKeyless Drill Chuck with Sensitive Micro Drill Adapter in EXCELLENT condition.
$
600.00
Buy It Now
$173.87 Shipping
Condition: Used
Location: New Ulm, United States
DUMORE 37-041 Sensitive Bench Style Hi Speed Drill Press. 1000 - 16000 RPM. Cast Iron base. Quick adjustable retract balance pressure. 115/120 volt single ... morephase Circuit board, Watchmaker, Jewelers. Quick adjust handle position.
$
999.00
Buy It Now
$218.14 Shipping
Condition: Used
Location: Bayonne, United States
A. Muehlmatt Division of The Hamilton Tool Co., Hamilton, Ohio - USA. (2831)You are purchasing what is shown in photos only. All photos are of the actual ... moreproduct(s) you will receive and are intended to help describe the quality and condition of the piece(s).
$
24.95
Buy It Now
Free Shipping
Condition: Used
Location: Waterford, United States
USED, GOOD CONDITION, DRILL PRESS QUILL CHAIN. LOOK AT THE PICTURES.
$
650.00
Buy It Now
$150.00 Shipping
Condition: Used
Location: Cambridge, United States
DUMORE 37-021 Sensitive Bench Style Hi Speed Drill Press 1000 - 16000 RPM. The drill is in very good condition and runs smoothly. 
$
699.99
Buy It Now
$199.99 Shipping
Condition: Used
Location: Kinsman, United States
DUMORE 37-021 Sensitive Bench Style Hi Speed Drill Press 1000 - 16000 RPM. DETAILSAPPLICATIONSFor instrument, electronic and research applications.Over-sized ... morebase and wide throat accommodate large parts and fixturing.Timing belt maintains spindle speed accuracy.FEATURESColumn spring eases drill head height adjustment.Adjustment knob on return spring provides feed sensitivity adjustment.Chuck: 5/32" capacity geared typePlease view all photos and ask questions Thanks Locknwalk LLC
$
165.00
Buy It Now
Free Shipping
Condition: New
Location: Villa Ridge, United States
in new condition. Comes with all items shown.
$
380.00
Buy It Now
Condition: Used
Location: Pawtucket, United States
As found. In good running condition. Variable speed, Jacobs#0 chuck, 0-5/32" capacity. No damage or repairs. Please email any questions. Additional ... morepictures can be taken. If the shipping cost doesn't look right. Contact me for clarification, the calculator can be wrong. International buyers should always ask for a shipping quote before bidding. I usually pick the faster USPS Priority Mail in my listings, but am happy to ship Parcel Post to save you money. Shipping costs include handling fees to cover insurance and packing supplies as needed. I use USPS Flat Rate boxes whenever possible to save money, and am happy to combine purchases. Local pickup is welcome. I will send an invoice shortly after the auction ends. And payment is expected within 5 days. I ship within 1-3 days of receiving payment. Are you interested in Old Tools and Tool Collecting? Want to learn more about old tools. And meet some great people who have the same interests? I’ve been a member for over 20 years. Please take a minute to check out the Mid-West Tool Collectors Web Site. Bid with confidence- Satisfaction guaranteed on all my auctions. Thanks
$
175.00
Buy It Now
$8.74 Shipping
Condition: Used
Location: Gainesville, United States
Albrecht Micro Keyless Drill Chuck 0-1.5mm Sensitive Feed 3/8 Shank. The sensitive feed holds position well but does not have spring retract. Chuck is ... morein good condition with smooth adjustments. Please review all photos to determine condition and identification. Item is sold as is with No Returns. Will be shipped via USPS Priority.
$
500.00
Buy It Now
$30.50 Shipping
Condition: Used
Location: Lincoln, United States
Dumore Hi-speed sensitive drill. 17000 RPM 115 Volt 1.0A.
$
65.00
Buy It Now
$8.00 Shipping
Condition: Used
Location: Hemet, United States
More pictures can be sent if requested for specifics.
$
2250.00
Buy It Now
Condition: Used
Location: Bentley, United States
Allen column-type Drill Press. 220 volt 3 phase (motor can be swapped to 440/460 volt). In my view, this qualifies as a "sensitive" drill press, being ... morethat light precision work can be done on heavier workpieces.
$
175.00
5h 29m 57s
0 bids
$250.00 Now
$6.16 Shipping
Condition: Used
Location: Attica, United States
MADE IN GERMANY BY ALBRECHT. ● 1/2" straight shank for ease of use in your machine with collet or chuck. HI-PRECISION KEYLESS DRILL CHUCK WITH SENSITIVE ... moreMICRO DRILL ADAPTER. Shank mount: JO. Shank: 1/2" straight.
$
65.00
2d 10h 48m 35s
0 bids
$6.00 Shipping
Condition: Used
Location: Joelton, United States
This drill chuck from Jacobs is perfect for any metalworking or manufacturing project, with a capacity of 0 - 5/16 inches and a drill chuck type that ... moreensures maximum stability and precision. The included sensitive drilling attachment means that you can achieve even greater control and accuracy with your drilling, making this a must-have for any serious workshop or job site. The brand is known for its quality and reliability, so you can buy with confidence and trust that this drill chuck will get the job done right.
$
399.99
Buy It Now
Condition: Used
Location: Bay Shore, United States
Good Usable Condition.
$
174.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Springville, United States
Combined drill and countersink. 40°-60° single countersink, single-sided chip breaker. Chuck Center Drills Set of 4 (Numbers 1-4) -QUANITY 1. Spring loaded ... more3/4” travel fits most drills, mills, lathes or jig borers.
$
52.99
Buy It Now
Free Shipping
Condition: New
Location: Sheridan, United States
Chuck Capacity is 0.3 to 4 mm. This small Micro Drill Adaptor ( sensitive drill adaptor) is like a miniature quill. ER-20 Collet Adapter for Instant Milling-Fits ... moreto 3"75 mm/ 4" 100MM-USA FULFILLED. & is designed to drill small holes using a lathe, mill or pillar drill.
$
93.80
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
DRILL OR REDUCTION SLEEVE(MT3 - MT2 Drill Sleeve). For drill chuck with JT2 holder. Morse cone front: JT2. Inside: MT2. Drill Sleeves are used to adapt ... moresmaller morse taper shank tools to larger machine spindles.
$
83.18
Buy It Now
Free Shipping
Condition: New
Location: United States
This small Micro Drill Adaptor ( sensitive drill adaptor) is like a miniature quill & is designed to drill small holes using a lathe, mill or pillar drill. ... moreSize: ‎1/2" Shank-JT0 Taper. Included Components: Drill Chuck.
$
199.99
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown, United States
Royal Sensitive feed arbor with Jacobs USA no.0 keyed drill chuck. Nice ready for work condition.
$
124.99
Buy It Now
Free Shipping
Condition: Used
Location: Newbury Park, United States
Has some surface rust as pictured, appears to function properlyLoc:3.7
$
3500.00
Buy It Now
Condition: Used
Location: Lenapah, United States
(42) Avey MA-8 Drill Press Functions Test - YouTube. 2 JACOBS No. 32 DRILL CHUCKS - CAPACITY 0 - 3/8. SPINDLE SPEEDS: (6) 600 - 6,000 RPM. EVEN BOTH WORK ... moreLIGHTS WORK! TABLE WORKING SURFACE: 12” x 23”.
$
21.99
Buy It Now
Free Shipping
Condition: New
Location: Holbrook, United States
Ceramic abrasive grains have a crystalline structure which makes them fracture is such a way that it continuously reveals sharp edges for quick and effective ... moregrinding. Keeping heat low during grinding is important because it extends the life of the abrasive itself and protects sensitive work pieces such as stainless steel, cobalt, and nickel from burning or staining.
$
99.00
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
For drill chuck with JT2 holder. Morse cone front: JT2. Drill Sleeves are used to adapt smaller morse taper shank tools to larger machine spindles. The ... moredrill jig allows the drill to be pulled out quickly for lubrication and chip loosening.
$
9.79
Buy It Now
$4.00 Shipping
Condition: New
Location: Huntington Beach, United States
| | | | | | | All Industrial part# ABS-3900-0220, Provides sensitive fell for hand tapping small holes on mills and drill presses. Starts every hole straight ... moreand prevents tap breakage. Shank diameter: 3/8" Handle diameter: 1" Tap capacity: 0-12, We combine shipping! Complete the buy it now and we'll send you a combined shipping invoice to pay from, For additional sizes and great pricing on cutting tools please visit the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery(please contact your local post office to determine estimated taxes and duty fees) While we can ship to P.O. boxes, Hawaii, Alaska, Puerto Rico, and international addresses, there may be a fee to do so. Should you have any further questions regarding ou
$
92.99
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
For drill chuck with JT2 holder. Morse cone front: JT2. The drill jig allows the drill to be pulled out quickly for lubrication and chip loosening. Shank ... moreis precisely ground. Skylark Tools comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest Indian industrial standards.
$
80.99
Buy It Now
Free Shipping
Condition: New
Location: Austin, United States
Grasp free turning ring and feed drill. Spring loaded 3/4" travel fits any drill, mill, lathe or jig borer. Reduces small drill breakage. Suitable for ... moredrills (.008-5/32") TIR.002". Spring loaded 3/4" travel fits any drill, mill, lathe or jig borer.; Reduces small drill breakage.
$
180.00
Buy It Now
$5.85 Shipping
Condition: Used
Location: Keller, United States
Used but in great condition. See pictures for details.
$
42.65
Buy It Now
Free Shipping
Condition: New
Location: Sheridan, United States
Chuck Capacity is 0.3 to 4 mm. This small Micro Drill Adaptor ( sensitive drill adaptor) is like a miniature quill & is designed to drill small holes ... moreusing a lathe, mill, or pillar drill. & is designed to drill small holes using a lathe, mill, or pillar drill.
$
170.00
Buy It Now
$11.00 Shipping
Condition: Used
Location: Fontana, United States
Machinist ALBREGHTO 1,5 Keyless Drill Chuck with Sensitive Feed ~UsedSee photos carefully before purchase Selling AS-IS FOR PARTS OR REPAIR, I’m not a ... moremachinist so I don’t know the condition on item.Any questions call 626)494-7857
$
39.99
Buy It Now
Free Shipping
Condition: New
Location: Holbrook, United States
Ceramic abrasive grains have a crystalline structure which makes them fracture is such a way that it continuously reveals sharp edges for quick and effective ... moregrinding. Keeping heat low during grinding is important because it extends the life of the abrasive itself and protects sensitive work pieces such as stainless steel, cobalt, and nickel from burning or staining.
$
21.99
Buy It Now
Free Shipping
Condition: New
Location: Holbrook, United States
Ceramic abrasive grains have a crystalline structure which makes them fracture is such a way that it continuously reveals sharp edges for quick and effective ... moregrinding. Keeping heat low during grinding is important because it extends the life of the abrasive itself and protects sensitive work pieces such as stainless steel, cobalt, and nickel from burning or staining.
$
21.99
Buy It Now
Free Shipping
Condition: New
Location: Holbrook, United States
Ceramic abrasive grains have a crystalline structure which makes them fracture is such a way that it continuously reveals sharp edges for quick and effective ... moregrinding. Keeping heat low during grinding is important because it extends the life of the abrasive itself and protects sensitive work pieces such as stainless steel, cobalt, and nickel from burning or staining.
$
189.99
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown, United States
Cushman Keyed 5/32” Micro Drill Chuck W/ Sensitive Finger Feed Shank (1/2" dia). Actual item pictured.Be sure to view our other items for more great tooling ... morefinds.
$
75.17
Buy It Now
Free Shipping
Condition: New
Location: Sallisaw, United States
This is new and in it's original box. It has a 1/2 straight shank that is hardened and precision ground with a 0jt. It is spring loaded. This arbor ... morewill reduce small drill breakage. Suitable for drills.008-5/32 and has.002 TIR. I will need to take the arbor out of it's box to fit it into a usps small box. I can break the cardboard box down that the arbor shipped it and put it in the USPS box.
$
450.94
Buy It Now
$15.46 Shipping
Condition: New
Location: Palatine, United States
1/2" straight shank for ease of use in your machine with collet or chuck. Applicable in mills lathes, drill presses and jig borers. Micro Drill Adapter ... more1/8" Keyless Chuck. Precision sensitive drill adapter.
$
39.99
Buy It Now
Free Shipping
Condition: New
Location: Holbrook, United States
Ceramic abrasive grains have a crystalline structure which makes them fracture is such a way that it continuously reveals sharp edges for quick and effective ... moregrinding. Keeping heat low during grinding is important because it extends the life of the abrasive itself and protects sensitive work pieces such as stainless steel, cobalt, and nickel from burning or staining.
$
12.99
Buy It Now
Free Shipping
Condition: New
Location: Sheridan, United States
Drill Chuck Taper is JT0. Chuck Capacity is 0.3 to 4 mm. ER-20 Collet Adapter for Instant Milling-Fits to 3"75 mm/ 4" 100MM-USA FULFILLED. Designed to ... moredrill small holes using a lathe, mill or pillar drill.
$
11.35
Buy It Now
$10.40 Shipping
Condition: New
Location: Chino, United States
Machine Tapping Guide. Provides sensitive feel for hand tapping small holes on mills and drill presses. Starts every hole straight and prevents tap breakage. ... moreTap capacity is #0-12. MACHINE TOOL ACCESSORIES.
$
37.99
Buy It Now
Free Shipping
Condition: New
Location: Sheridan, United States
This small Micro Drill Adaptor ( sensitive drill adaptor) is like a miniature quill & is designed to drill small holes using a lathe, mill or pillar drill. ... moreV Block Jig Fixture for Center Drilling on a Round Work-piece 2" (USA FULFILLED).
$
75.17
Buy It Now
Free Shipping
Condition: New
Location: New York, United States
This is new and in it's original box. It has a 1/2 straight shank that is hardened and precision ground with a 0jt. It is spring loaded. This arbor ... morewill reduce small drill breakage. Suitable for drills.008-5/32 and has.002 TIR. I will need to take the arbor out of it's box to fit it into a usps small box. I can break the cardboard box down that the arbor shipped it and put it in the USPS box.
$
39.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Winnetka, United States
We Have Thousands Of Machine Manuals. Instruction Manuals. Machinery Maintenance Manuals. Parts list. Service Manuals. Machinery Brochures And Schematics ... moreFor Sale. We Are Proud To Provide Service To The Metalworking. Chip Making and Fabricating Machine Tool Manual Needs. We Take Great Pride In Getting You The Correct Manual For Your Machine. Let Us know Your Serial Number. And Model Number. We Guarantee That We Will Get You a Correct Manual or Your Money Back! Each Manual Is Comb Bound For Easy Reading On A Flat Surface Such As a Table or Workbench. We Have Collected These Manuals Over Many Years And Continue To Look For More Every Day. Our Customers Have Been Pleased With Our Manuals. Schematics, Parts List, Service Manuals, Maintenance Manuals, Instructions Manuals And Brochures. They Are Filled With Invaluable Information, Sometimes Not Even Available Direct From The Manufacturer. We Are Often The Last Resort. We Take Pride In This Fact. We Are Here To Fulfill Your Industrial Machinery Manual Needs Today. Email Us Today! Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false M
$
65.90
Buy It Now
Free Shipping
Condition: New
Location: Sheridan, United States
Chuck Capacity is 0.3 to 4 mm. This small Micro Drill Adaptor ( sensitive drill adaptor) is like a miniature quill. ER-20 Collet Adapter for Instant Milling-Fits ... moreto 3"75 mm/ 4" 100MM-USA FULFILLED. & is designed to drill small holes using a lathe, mill or pillar drill.
$
92.95
Buy It Now
Free Shipping
Condition: New
Location: Joliet, United States
Grasp free turning ring and feed drill. Spring loaded 3/4" travel fits any drill, mill, lathe or jig borer. Reduces small drill breakage. Suitable for ... moredrills (.008-5/32") TIR.002". Spring loaded 3/4" travel fits any drill, mill, lathe or jig borer.; Reduces small drill breakage.
$
76.99
Buy It Now
Free Shipping
Condition: New
Location: Irvine, United States
Grasp free turning ring and feed drill. Spring loaded 3/4" travel fits any drill, mill, lathe or jig borer. Reduces small drill breakage. Suitable for ... moredrills (.008-5/32") TIR.002". Spring loaded 3/4" travel fits any drill, mill, lathe or jig borer.; Reduces small drill breakage.
$
92.29
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
For drill chuck with JT2 holder. Morse cone front: JT2. The drill jig allows the drill to be pulled out quickly for lubrication and chip loosening. Shank ... moreis precisely ground.
$
308.79
Buy It Now
Free Shipping
Condition: New
Location: China
2 Axis DRO digital readout for milling lathe machine with precision linear scale. NOTE: This kit includes 2 pieces 5 micron linear scale and 1 pieces ... more2 axis DRO. 950MM and 300MM. It is compete dro kits with parts to fit mounting.The linear scale has to be chosen from 50-1000mm travel length.
1 2 3 4 5 6 7
 In 

Former Listings  
 
Dumore High Speed Drill Sensitive Drill Watchmakers/ Jewelers Drill press JACOBS
WORKING! Dumore sensitive"HIGH SPEED" drill press. Vintage. Made in RACINE, W I USA! 17,000 RPM. 115 volts.8 amp. Standered plug in& GO! PAINT finnish is old& has chips, flakes& wear spots. comes with the chuck key. has Jacob's 5/ 32 chuck. Stands approx. 16 1/2' tall. base is approx. 5' x 8' Round table is 3 1/2' diam& does have a couple of sm drill holes, see photos. The underside of base still has the original red primer. Table is adjustable in height from 4 7/8' up to at least 8 3/4' maybe more. The alum. hand wheel moves the table up 1 1/2' by turning wheel.Weights 14 lbs! Cord is in very good condition. PLEASE LOOK AT ALL OF THE PHOTOS for complete description. Please see my other items listed for sale. FAIR starting bid w NO reserve. Ser# 8105 2260. Cat# 16- 011. NOT variable ... morespeed. Powered by The free listing tool. List your items fast and easy and manage your active items.
DUMORE MICRO PRESICION SENSITIVE DRILL PRESS 37-021 115V VARIABLE SPEED
DUMORE MICRO PRESICION DRILL PRESS 37-021 115V This auction is for a DUMORE MICRO PRESICION DRILL PRESS 37-021 115V. This unit is in great shape. We put power to it and it turns great. Everything functions like it should. This is a very nice drill press. DUMORE Drill Press Cat. NO 37-021 Ser. 3323 1137 Max HP.3 Volts 115 CY. 50-60 single phase Amps 5 1000-14000 RPM Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13e078d10dd-0xfe-
WESTHOFF WM-100-1 ULTRA SENSITIVE EDM ELECTRODE DRILL PRESS FLUSHING MACHINE
FOR SALE WESTHOFF WM100-1 SUPER SENSITIVE DRILL- 961484 THIS ELECTRODE DRILL PRESS WORKS VERY NICELY. MOTOR RUNS SMOOTH AND SOUNDS EXCELLENT. TYPICALLY USED FOR FLUSHING HOLES IN GRAPHITE. BUT HAS NUMEROUS OTHER SPECIALIZED USES. LIGHT WORKS. BUT NEEDS NEW BULB. FOR COMPLETE SPECS VISIT: WILL BE PROFESSIONALLY PACKAGED. SHIPPING TO LOWER 48 USA ONLY PLEASE. ENJOY!
Hamilton Sensitive Drill Press - Precision
Hamilton Precision Sensitive Drill Press Includes Precision Chuck Drill is in Great working order. And cosmetically is in very good shape. Please refer to the pictures I can chip this item via UPS Call 732-642-8273
Dumore High Speed Drill Press Precision Sensitive Jeweler Watchmaker
As found. In good running condition. Variable speed, Jacobs#0 chuck, 0-5/32" capacity. No damage or repairs. Please email any questions. Additional pictures can be taken. If the shipping cost doesn't look right. Contact me for clarification, the calculator can be wrong. International buyers should always ask for a shipping quote before bidding. I usually pick the faster USPS Priority Mail in my listings, but am happy to ship Parcel Post to save you money. Shipping costs include handling fees to cover insurance and packing supplies as needed. I use USPS Flat Rate boxes whenever possible to save money, and am happy to combine purchases. Local pickup is welcome. I will send an invoice shortly after the auction ends. And payment is expected within 5 days. I ship within 1-3 days of receiving payment. Are you interested in Old Tools and ... moreTool Collecting? Want to learn more about old tools. And meet some great people who have the same interests? I’ve been a member for over 20 years. Please take a minute to check out the Mid-West Tool Collectors Web Site. Bid with confidence- Satisfaction guaranteed on all my auctions. Thanks
HAMILTON TOOL CO SENSITIVE DRILL WITH FOOT PEDAL
GOOD USED CONDITION. WORKS FINE.ITS USABLE AND WITH A LITTLE TLC GREAT ADDITION TO YOUR SHOP. Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
Westhoff 100 EDM Electrode Flush Hole Drill Sensitive Drilling Machine Sinker
Here’s a nice. Clean Westhoff, No. 100-1, EDM Electrode Flush Hole Drill/ Drilling Machine These machines are to never be lubricated… The leadscrews run in Nylatron nuts and the aluminum. Dovetail ways are lined with Nylatron wear strips. Over time the adhesive breaks down and the Nylatron strips get loose or fall out(I’ve owned and used these machines) This machine has all new Nylatron strips– and it’s a pain in the butt to replace because it’s resistant to being sheared accurately and must be“weighted” so it goes down flat– see pictures. No“paint job” here. Includes Albrecht 0-1/8” Keyless Chuck& Factory Work Light Specifics- Westhoff; St. Louis. MO· Mod No: 100-1· Table Size: 8.5”x 8.5” T-slotted· Work Table Travel: 8.5” Head Travel: 4.5” Horiz. Travel: 12” RPM: 0-15.000, Infinitely Variable· Max. Table Load: 30 ... morelbs. Volts: 110. Phase: 1· Net Weight: 44 lbs. May be inspected at our facility Compare at around $3000 new… PLEASE NOTE WELL: If you don’t have the $$$ to pay for this item within 3 DAYS of purchase– Please DON’T press the“Buy It Now” button. Free Credit and Free“Lay-a-Way” are NOT included. Item will be relisted for sale to a $ buyer if not paid for in 3 days… Free Loading For Buyer Pick Up! Preferred) OR Add $45 to attach machine to plywood. Build skeleton stick frame crating around it and pack in custom, double wall box approx. 24”x 36”x 20” at approx. 65 lbs. for shipping by U.P.S. Ground from zip 44440. You know U.P.S. will throw it at least once or twice… If you have any questions or want more pictures or information please call us at(330) 652-7535.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e14a54482-0x100-
ALBRECHT Keyless sensitive Hand Feed Drill Chuck 0-1.5 mm ( 0.62" )
PHOENIX TOOL COMPANY High Precision Sensitive Hand Feed Drill reduces small drill breakage. With ALBRECHT Keyless Chuck suitable for drills 0-1.5 mm(0- 062" 1/2 inch dia. x 2" straight shank extends 11/16" Easy operation. Grasp-free turning ring, feed with gentle finger pressure, auto return upon release. Used but in perfect condition.
WESTHOFF SUPER ULTRA SENSITIVE DRILL FOR EDM ELECTODES,PRECISION DRILLING
THIS IS A WESTHOFF SUPER SENSITIVE DRILL WITH DUMORE 115 VOLT VARIABLE SPEED MOTOR AND ALBRIGHT KEYLESS CHUCK.WORK LIGHT AND SLIDING TABLE WITH DEPTH INDICATOR, ALL IN GOOD WORKING CONDITION,JUST NEEDS A GOOD CLEANING, THE TABLE WAYS LOOK BAD, BUT FEEL PRETTY GOOD BUT WILL HAVE TO BE CHANGED. COST FROM WESTHOFF IS 100.00 OR BUY 2 PIECES OF 3/4 GROUND ROD 13" LONG. COMES WITH OPERATORS MANUAL. NO CHARGE FOR CRATING AND LOADING. AND YOU GET OUR SHIPPING DISCOUNT APPROXIMATE SHIPPING WEIGHT:55 LBS. 30 X 22 X18 WE SHIP UPS OR USPS FLAT RATE WHEN AVAILABLE. FOR SHIPPING QUOTES CALL TINA@ 727-362-8318. ALL OTHER QUESTIONS CONTACT GERRY VIA EMAIL OR 727-547-0616. BUYER PAYS ACTUAL SHIPPING FROM 33782. LOCAL INSPECTIONS AND PICKUPS WELCOME. I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply ... moresend the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping. And the item is shipped, YOU. The BUYER. Are now responsible, along with the shipping service provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges. Such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 41 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Bid with confidence! On Dec-22-11 at 09:55:08 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Applicatio
Dumore Precision Hi-Speed Sensitive Drill Press Machinist Jeweler Watchmaker USA
Dumore Precision Hi-Speed Sensitive Drill Press Made in USA 17000 RPM Made by the Dumore Co. in Racine Wisconsin USA This item appears to have average to heavy use. But has been plugged in and runs very smoothly. Item has some staining and a few blemishes and paint chips. Please refer to pictures for accurate physical condition. Power supply does not look to be original though all wires and electrical work are done well and function properly. This item is antique and cannot be guaranteed. Feel free to contact us about this item. NOTICE! PLEASE PAY PROMPTLY! SHIPMENTS ARE MADE ONCE A WEEK IF YOUR PAYMENT IS MADE AFTER 48 HOURS OF AUCTIONS END. YOUR ITEM WILL BE SHIPPED THE FOLLOWING WEEK We do not ship to PO boxes under any circumstances. We strive to be 5 star sellers and quick shipping is a part of that. We cannot ship expediently if your ... moreinformation is incomplete. Please help us to serve you better by ensuring your Ebay contact information is up to date and verified with a valid and current telephone number. IF YOUR ITEM IS RECEIVED AND SHOWS SIGNS OF DAMAGE PLEASE CONTACT US FIRST FOR INSURANCE PURPOSES. INDIANA RESIDENTS WILL BE RESPONSIBLE FOR PAYING THE SALES TAX ON THE WINNING AUCTION PRICE FOR THIS LISTING. We reserve the right to stop auction at any time due to in store sales. PLEASE NOTE: WE SHIP THROUGH UPS or USPS FOR DOMESTIC SHIPMENTS 3-5 DAY ARRIVAL TIME FOR ALL PACKAGES. WITH THE EXCEPTION FOR UNITED STATES: Hawaii. Alaska, Puerto Rico and Virgin Islands. We do not ship to these areas. PLEASE NOTE FOR ALL SHIPMENTS. TRACKING NUMBER IS AVAILABLE AND WILL BE E-MAILED TO YOU ONCE THE ITEM HAS BEEN PACKAGED AND SCANNED FOR SHIPMENT FROM OUR LOCATION. Please make payment within 48 Hours of winning item or make payment arrangements You must have complete ship to address(We will ship to address that is on your order details) SHIPPING WILL BE A FLAT $22.00 PAYPAL ONLY WE SHIP ONLY TO THE CONTINENTAL USA ONLY! Buy Safe as we are a long time Ebay seller and verified member of the community! TERMS AND
4' x 12" FOSDICK 'Sensitive' Radial Drill ('52/Rebuilt by US Government '83)
Preowned 4' x 12" FOSDICK Radial Drill. Model: 4' Sensitive, S/N: 16178(New 1952; Rebuilt by the U.S. Government in 1983) Column diameter Arm length Maximum/Minimum distance. Face of column to center of spindle Maximum/Minimum distance. Spindle to base Maximum/Minimum spindle radius Maximum distance. Spindle to table Vertical travel of spindle in head Spindle taper Spindle sleeve diameter Horizontal travel of head on arm Base height Working surface of base(width x length) Table working surface(width x length) Table travel(9) Spindle speeds(4) Spindle feeds Distance. Floor to top of column Distance. Floor to top of head 12" 53" 48"9" 45" 35" 54"15" 23-1/2" 10" 4 Morse 2-7/8" 39" 6-1/4" 30" x 53" 24" x 48" 16-1/2" 75-1.500 R.P.M. 004. 008, ... more014& 020 I.P.R. 80" 95" Equipped With. Fixed height arm which moves 360° around the column 24" x 48" T-slotted tilt work table which swings 360° around the column Electrically actuated raising/lowering of the work table Reversing motor control for tapping operations 1/8"3/4" capacity JACOBS key-type drill chuck T-slotted base Work light 1/2 H.P. 3/60/220-440 volt table elevation motor 3 H.P. 3/60/220-440 volt spindle drive motor and electrical controls Machine is wired for 440 volt operation. Approximate Weight: 5.700 Lbs. Approximate Dimensions: 84" L-R x 38" F-B x 96" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
CLEAN!! JACOBS 0"-5/32" SENSITIVE DRILL CHUCK w/ 1/2" SHANK
aims CLEAN! JACOBS 0"5/32" SENSITIVE DRILL CHUCK w/ 1/2" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Jacobs. This is a Sensitive Keyless Drill Chuck in GREAT condition. Features: Makes drilling of small holes easy by giving operator fingertip feed control independent ofcoarser quill feed. Spring loaded shank. Hardened and ground. Reduces drill breakage and scrap when large machine tools are used to drill small holes. Specifications: Capacity: 0- 5/32" Shank: 1/2" Overall Length: 3-7/8" Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions ... morein this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CLEAN! JACOBS 0"5/32" SENSITIVE DRILL CHUCK w/ 1/2" SHANK CLEAN! JACOBS 0"5/32" SENSITIVE DRILL CHUCK w/ 1/2" SHANK Reliable Tool Inc. c 2011 | Powered by
ALBRECHT Keyless Sensitive Hand Feed Drill Chuck 0-1/8" ( 0-3 mm )
Albrecht tapping chuck. It is stamped 0-1/8& 0-3. Made in Germany. The chuck itself is in very good condition and works fine. Jacobs A4000 Shank(as shown in pictures) Good Used Condition If you have any questions. Please e-mail me. I will combine postage on any items mailed to the same address on the same day. Please pay within 5 days. Or I’ll have to relist. Thank you!
Dumore Series 16 Precision Sensitive Drill Press Machinist Jeweler Watchmaker
Up for auction is this great table top drill press made by Dumore Corporation. Compact and light weight. This bench type sensitive drill press is a rigid, stationary unit designed to consistently drill exceptionally precise small holes. Large, knurled adjustment wheels provide for easy, finger tip control. The hand fed sensitive drill press table moves work to the drill while the hole depth adjustment collar maintains selected depth. A three-inch throat and swing away table adds to the versatility. Accessories are available to control drill speeds. The Series 16 sensitive drill press includes an 8’ cord and 3-prong plug. In addition to the drill press, you will receive and assortment of at least 50 carbide burs, abrasive wheels and other bits. You can download the users manual.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13e64f93876-0x100-
Tiny Albrecht 0-1.5mm Drill Chuck on Sensitive Drill Press Mandrel NICE!
Tiny Albrecht 0-1.5mm Drill Chuck on Sensitive Drill Press Mandrel NICE! Click to View Image Album Click to View Image Album This little package lists for almost $400 and it is in very good used condition. The spring returns the chuck when pressure is released. The chucks griping surfaces are in excellent condition and the bearing in the pressure ring feels good. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand ... morealone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. two. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR. Formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed is incorrect. eBay doesn't allow our auction listing service the ability to put motor feight costs into the shipping c
DUMORE MINI DRILL PRESS HI-SPEED SENSITIVE WATCH-MAKERS PRECISION JEWELERS DRILL
WATCHMAKERS DRILL Features: Dumore hi-speed sensitive watch-makers precision mini drill press 16-021 Shows normal/heavy signs of use. Dirty/rusting/dusty Cord has some paint resiude on it Working Item comes as pictured. Photos are of actual auction item The auction comes with everything pictured above. If it is not pictured. We DO NOT have the item. Note that all of our items are purchased second hand. They made need some cleaning/dusting/tune-ups. Anything major should be listed above. Please contact us with any problems before leaving feedback. Customer service/satisfaction is very important to us and we will do whatever we can to make the situtation right to make sure you are 100% taken care of and satisfied. We strive to be a 5 star seller. If you feel we did less then a 5 star job. Please let us know so we can make things right. We can't ... morebe top rated without your 5 star rating! Let us know what we can do to be a 5 star seller for you! NO INTERNATIONAL SHIPPING. PLEASE DON'T ASK. Payment by paypal within 72hrs after completed auction. Item will ship within 72hrs or 3 business days after payment clears. If you have any comments or questions please contact us through the"ask seller a question" link on this auction Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e6f14f462-0x102-
DUMORE MICRO PRESICION SENSITIVE DRILL PRESS 37-021 VARIABLE SPEED **NO RESERVE!
Decent looking and perfectly functioning. This weighs 62.5 pounds before packing so shipping is higher than I'd like. Looks like $44 to St Louis. $75 to LA but only $38 to Albany. Shipping amount will cover GROUND shipping and insurance. I'm going to roll the dice and set shipping at $50. Yes local pick up is welcome. And if you're in the Pittsburgh area inspection is possible before the auction ends. I'll need 24 hour notice but just email and we can set it up. Lower 48 states only on this one. I really don't know a lot about this. The variable speed works really well. Can't believe how slow it can turn when on low. Pretty cool! I'll try to answer any questions but I'm including a PDF of the manual. Right now I'm certain it's on the lower of the 2 ranges. Range is changed with a belt adjustment in ... morethe drill head. The manual makes it sound easy but I'm not going to try it. Questions? Just ask! Please pay within 3 business days. I can't ship it until you pay. Check my feedback and bid with confidence. On May-04-13 at 14:30:51 PDT. Seller added the following information: I can't figure out how to add a PDF to this description. Just ask a question via ebay and I'll email it to you. Please include your email address when asking.
NICE!! ALBRECHT 0 - 1/16" (1.5mm) SENSITIVE KEYLESS DRILL CHUCK
aims NICE! ALBRECHT 0- 1/16" 1.5mm) SENSITIVE KEYLESS DRILL CHUCK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in Germany by Albrecht. This is a Sensitive Keyless Drill Chuck in GREAT condition. Features: Makes drilling of small holes easy by giving operator fingertip feed control independent ofcoarser quill feed. Spring loaded shank. Hardened and ground. Reduces drill breakage and scrap when large machine tools are used to drill small holes. Specifications: ... moreCapacity: 0- 1/16" 1.5mm) Shank: 1/2" Overall Length: 3-7/8" Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! ALBRECHT 0- 1/16" 1.5mm) SENSITIVE KEYLESS DRILL CHUCK NICE! ALBRECHT 0- 1/16" 1.5mm) SENSITIVE KEYLESS DRILL CHUCK NICE! ALBRECHT 0- 1/16" 1.5mm) SENSITIVE KEYLESS DRILL CHUCK Reliable Tool Inc. c 2011 | Powered by
Albrecht Sensitive Keyless Drill Chuck. 0-1.5mm Excellent Condition!
For Sale here is a Albrecht Keyless Drill Chuck made in Germany with a 1/2" diameter shank with light pressure drill feed(Sensitive Feed) attachment for drilling small diameter holes. It has a range of 0-1.5mm(0-1/16" It is in excellent condition and has only been used on a couple of occasions. Please feel free to message me with any questions you may have. Thank you.
Hamilton Bench Top Varimatic Sensitive Drill Press
Hamilton Bench Top Varimatic Sensitive Drill Press Overview- The VARIMATIC precision drill presses combine the convenience of infinitely variable speed control with the super-sensitivity and durability found throughout the entire Precision Drilling Machine line. It offers flexibility and sensitivity. Accuracy and stamina, far beyond the requirements of average use. Spindle speed adjustment is infinitely variable- in two speed ranges- from 840 to 9300 RPM. The change from one speed range to the other is made with a simple adjustment of the belt. And within each range. The exact spindle speed is controlled with a graduated hand wheel. The drilling unit is self-contained. Swings radially on the column, can be raised and lowered with an elevating screw and can be locked in any position. Has the original crinkle paint and does not show much use. ... moreThis Precision Varimatic Variable Speed Drill Press is in great condition. Description- Variable Spindle Speed: Two ranges- Low Range: 880 to 2.700 rpm- High Range: 2.850 to 9,350 rpm- Quill Depth/ Feed: 2-3/8" Throat: 5" Swing: 10" Base Table: 7-1/4" x 9-3/4" Removable Table: 10-1/2" x 6" Maximum Distance Base Table to Chuck: 7" Column Dimensions: 1-7/8" dia. x 20" tall- Motor: 1/3 Horsepower. 115/230 Volt, 1,735 rpm, 4.4/2.2 Amps, Electrical: 115/230V. Single Phase- Overall Dimensions: 61" x 25" x 32" Comes as shown in picture with a sturdy factory table with shelves and XY table with 1/4 hard bushings. 6422( JK)5/15/13 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you fe
Edlund 24 " Box Column Deep hole high speed sensitive Drill Press 1 1/2 - F12
please scroll down and view all the photos. The title is not a complete description so please read the ad description. You Are Bidding On A Pre-Owned Edlund 24 in. High speed sensitive Box Column Drill Press Model 1-1/2-F12 S/N 65263 20 in. x 20 in. Adjustable Oil Groove Table variable speed to 6000rpm drill chuck 230 v 3 P FLOOR MODEL HEIGHT: 72" WEIGHT: 950 LBS. Ideal for any shop or garage. Item is in working order. Description, Edlund 24 in. Box Column Drill Press Model 1-1/2-F12 S/N 65263 20 in. x 20 in. Adjustable Oil Groove Table super nice copy users manual specifications believed to be correct from manufacturer subject to verification: There is no charge to skid or load. Local pickups save all shipping and we can load with forklift into your truck or trailer. Questions email or call BOB 773-392-5055 Terms of Sale Bidders please ... moreread all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping· Flat rate shipping is to lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. Most items have a warranty check ad for policy in none is listed then the following applies. All items are sold"AS- IS. Where- IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We at Best Bay Machinery Sales and/or the Seller make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. I always return feedback so leave some good comments so I can do the same for you. Please see my other auction. You
DEAL! SERVO PRODUCTS PRECISION SENSITIVE DRILL PRESS HEAD MODEL 7401 W/ R8 MOUNT
Made by Servo Products Company of Pasadena. CA, USA This is a sensitive drill press head with R8 mount in good running condition. The accessories(including a bag of motor brushes) shown in the first picture are included. But may not be associated with this drill press head. Model Number: 7401 Serial Number: 5552 Please note the following known issues with this unit: The work light switch has been broken off and needs to be replaced(see photo#10 above) The rear part of the plastic belt guard that is attached to the body of the machine has been broken(see photo#8 above) There is a drill broken off inside the spindle(we did not attempt to remove) see photo#3 above) The number scale on the speed control dial is broken(see photo#5 above) Part of the broken piece will be included. Contact Servo for a replacement. View a brochure on the Servo website ... moreby clicking for more information about this unit(look for part number 7401) Specifications: Includes R8 mount for using this unit in a Bridgeport type milling machine. Spindle Hole Size: ~0.785" measured with a caliper.may be 5/64" there is a broken-off drill inside this hole as noted above) Approximate Overall Dimensions: 10" deep x 11-1/2" tall(including R8 mount) x 4" wide Comes as shown in pictures. 56
Dumore micro sensitive drill press INDICATORS NOT INCLUDED jewler watchmaker
Dumore Micro Drill Hi-speed sensitive drill press. INDICATORS NOT INCLUDED(for reference only) Albrecht 0-1/8" keyless chuck. X Y table. Variable speed controller. 17.000 RPM 1/16 HP Great drill press for jewlers. Watchmakers, toolmakers, machinest.
Machinist Tool: Lot of 2 Albrecht Keyless Sensitive Hand Feed Micro Drill Chucks
Up for auction is are 2 lightly used Lot of 2 Albrecht Keyless Sensitive Hand Feed Micro Drill Chucks. Both in good working condition, as follows: 0-1.5 with a 1/2" dia sensitive arbor. Moves smoothly#0-3 with a 1/2" dia sensitive arbor. This arbor is new and will need to be cleaned and oiled Please see my other listings
NICE! WESTHOFF MACHINE CO. ULTRA SENSITIVE DRILL - MODEL 100 - EDM COOLANT HOLES
Made in the U.S.A. by Westhoff Machine Co. This is an ultra-sensitive drill machine in good condition. Note that the power cord insulation is cracked and needs to be replaced and the power switch is missing the nut that holds it in place.see photos#10 and#11 above. The last photo shows a view of the inside of the speed control unit(we have more pictures of the inside of the speed control unit available upon request) Model Number: 100-1 Serial Number: 941257 This machine costs $2495 new! Information From The Manufacturer: Click to go to an information sheet about this machine on the Westhoff website. The key to an efficient EDM operation is introducing enough volume of dielectric oil into the cut. Efficient flushing can often mean the difference between profit and loss in an EDM job. With proper flushing. Molds and dies will come off the machine ... morefaster with a better surface finish. Smaller flush holes drilled closer together enable the dielectric oil to easily cover the entire electrode cutting surface allowing stable EDM'ing. Problems Created by Poor Flushing D.C. arcing or pitting. Poor finishes. Reduced metal removal rates. Excessive electrode wear. Benefits of Proper Flushing Stable cutting. Improved surface finishes. Faster cutting. Better electrode efficiency. This machine can help improve EDM flushing action by drilling precision holes greater in number than otherwise possible. Specifications: Table Dimensions: 8-1/2" x 8-1/2" T-Slots: 3/8" wide x 2" apart OC. Motor: 1/10 HP. 110 VAC, Single Phase. Weight: ~48 Lbs. Approximate Dimensions: 29" x 22-1/2" x 18-1/2" tall. Comes as shown in pictures.
Vintage Precision Sensitive Drill Press Micro balancing
I Have a micro drill press mand by Micro Balancing inc part number 1060 serial number 514 chuck size 0-5/32 I dont know what the RPM is but its fast. Maybe 10,000 rpm, but dont hold me to it. stands 22 inches tall(The table moves up to the chuck when drilling) please ask all questions, ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f8492face-0x107-
JACOBS MINIATURE CHUCK #0 WITH MICRO-SENSITIVE DRILL FEED ADAPTOR W/STARRETT BOX
NOTE:READ THE FOLLOWING BEFORE YOU BIDDING. We buy all our merchandise by bulk we look them over and try to describe the best we can.But they are used items and we sell as is. We pack well but recommend insurance on breakable items as we have no control over how the packages and how they are handled after they leave our hands. INVOICE: invoices will be send as soon as the auction is ended.Or the next business day. PAYMENT:We expect your payment to be paid or mail with in 3 days after auction.We follow EBAY guide lines and file for a non payment if We have no received your payment within 10 days. If your unhappy with your purchase once it’s arrived.Contact us as soon as possible and we will do our best to work it out with you. Jacobs miniature chuck#0 cap 0-5/32"0-4mm Comes 1/2" straight shank Micro-sensitive drill feed adaptor COMES ... moreAS SHOWN ON PIXS. Check out my! PLEASE CKECK ALL THE PICTURES FOR MORE DATAILS. THANKS FOR LOOKING. MASSTOOLS07.
~4~ SPINDLE SENSITIVE DRILL PRESS PRATT & WHITNEY SIGOURNEY 0-1/4" JEWELRY
~4~ SPINDLE SENSITIVE DRILL PRESS PRATT& WHITNEY SIGOURNEY 0-1/4" JEWELRY, 4 SPINDLE DRILL 0-1/4" CHUCKS. MFG BY SIGOURNEY PRATT& WHITNEY. 220V 3PHASE NICE HEAVY DUTY SENSITIVE DRILL WITH 4 HEADS. MUST SHIP FREIGHT. WILL STRAP AND SHRINK WRAP N/C. QUESTIONS OR FREIGHT QUOTE CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Freight- Check item description or contact seller for details. Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
SUPERB SERVO VARIABLE SPEED SENSITIVE DRILL PRESS MODEL #M-7000 W/ALBRECHT CHUCK
SERVO VARI-SPEED SENSITIVE DRILL PRESS MODEL#M-7000 ALBRECHT 1/8" CAPACITY KEYLESS DRILL CHUCK VARIABLE SPEED 200 to 20.000 RPM SPINDLE TO TABLE 6" SWING 7" TABLE DIMENSIONS 6" x 6" PROX SINGLE PHASE 120V SUPERB CONDITION. WORKS AS IT SHOULD BUYER TO PAY UPS COSTS NEW COST $2368.00
DUMORE PRECSION SENSITIVE DRILL PRESS WITH 8 AMP SPEED CONTROLLER VERY NICE
DUMORE PRECISION SENSITIVE DRILL PRESS. N.L. 15000 RPM AT 115 VOLTS. CHUCK IS 0-5/32 CAP. NO WOBBLE OR PLAY OF ANY KIND. MOTOR CONTROL IS TRANSFORMER TYPE OHMITE VT-8. 0-120 OR 0-140 DEPENDS ON TERMINALS USED HAS THE DIAL THATS FLIPS OVER FOR BOTH SCALES. THIS CONTROL LOOKS LIKE ITS NEVER BEEN MOUNTED. AND I HOOKED IT UP TEMPORY JUST TO SEE HOW WELL IT WORKED. AGAIN THIS IS ATRANSFORMER TYPE CONTROLLER NOT SOME CARBON PILETHAT YOU AREAFRAID OF GETTING BURNED WITH. ANY QUESTION PLEASE ASK
Dumore Hi-Speed Sensitive Drill 16-021
Bench Drill Press designed for precise small hole drilling
Fosdick Operator Install 4BM 5BM Sensitive Drill Manual
We Have Thousands Of Machine Manuals. Instruction Manuals. Machinery Maintenance Manuals. Parts list. Service Manuals. Machinery Brochures And Schematics For Sale. We Are Proud To Provide Service To The Metalworking. Chip Making and Fabricating Machine Tool Manual Needs. We Take Great Pride In Getting You The Correct Manual For Your Machine. Let Us know Your Serial Number. And Model Number. We Guarantee That We Will Get You a Correct Manual or Your Money Back! Each Manual Is Comb Bound For Easy Reading On A Flat Surface Such As a Table or Workbench. We Have Collected These Manuals Over Many Years And Continue To Look For More Every Day. Our Customers Have Been Pleased With Our Manuals. Schematics, Parts List, Service Manuals, Maintenance Manuals, Instructions Manuals And Brochures. They Are Filled With Invaluable Information, Sometimes Not ... moreEven Available Direct From The Manufacturer. We Are Often The Last Resort. We Take Pride In This Fact. We Are Here To Fulfill Your Industrial Machinery Manual Needs Today. Email Us Today! Industrial Machinery Manuals Is Proud To Offer 1 Digitally Enhanced Quality Bound Copy Of A: Fosdick Operators Instruct Hydraulic Radial Drill Manual This Manual Covers Models: 36 Spindle Speed This Manual Includes: Receiving Moving and Cleaning Installation. Lubrication Repair Parts List Operation: Head Gears and Spindle. Back Gear Case Speed Shifters. Driving Friction Clutch and Lubricating Pump Feed Gear Bracket. Tool Ejector Spindle Spindle Counterbalance. Motor Gear Box and Hydraulic Pump Electrical Diagrams: Hydraulic Panel Photograph. Hydraulic Circuit Diagram Adjustments and Maintenance: Hydraulics. Clamp and Roller Bearing Adjustment Spindle Bearing. Driving Friction Clutch Adjustments Much More! This Manual Has 42 Printed Pages. Year Aug 1951-We Ship Domestically via USPS First Class or Priority Mail ABSOLUTELY FREE! Delivery Time Usually 1-5 Days. If You Need a Product Faster. Please View The Shipping Calculator Below For Options. Other Options: UPS Overnight Next Day
Servo Products Standard Precision Sensitive Drill Press # 7000 w/ control board
Offered is One Servo Products Standard Precision Sensitive Drill Press Model# 7000 w/ control board! This unit has a few problems. Namely: The speed Knob is working but partially broken off(contact your local servo dealer for a replacement part) see picture 5) The small adjustment knob(see picture 5 for an arrow) is stuck and not working. There are a few cracks in the top cover(see pictures 6 and 7) Other than these defects the drill seems to be working well. I plugged it in and it started working well. For More info about the drill go to: Please see pictures IF YOU ARE NOT HAPPY WITH THE ITEM YOU BOUGHT- PLEASE SENT IT BACK WITHIN 7 DAYS AND I WILL REFUND THE BUYING PRICE(not shipping cost) NO QUESTIONS ASKED! THANKS Check out my if you want!
SERVO HIGH SPEED PRECISION SENSITIVE DRILL PRESS VARIABLE SPEED
In good working condition. Please call(386) 290-9607 with any questions.
DUMORE HI-SPEED SENSITIVE DRILL 16-011 (6115)
V:115 A:1.0. 1/16HP. SHIPPING PRICE VARIES. WE DID NOT PERSONALLY PUT UP SHIPPTING PRICE IT WAS DONE AUTOMATICALLY, PLEASE KEEP IN MIND SHIPPING MAY ACTUALLY COST MORE THAN LISTED DUE TO THE WEIGHT AND DIMENSIONS OF THIS ITEM AND THE LOCATION IT IS GOING TO. BEFORE PURCHASING PLEASE SEND YOUR SHIPPING INFORMATION TO FIND OUT SHIPPING COST
Albrecht Sensitive Drill Chuck. 0-1.5 and watchmaker/jeweler/gunsmith drillpress
Up for your consideration here is a like new Albrecht 0-1.5 mm keyless drill chuck and lathe or drill press set up with no stand. I am not positive of the brand or type of set up but it is marked DP285 and weighs in at about 10 pounds it is in excellent condition and seems to have never really been used. It works ever so smoothly and has adjustments for 5 speeds and is very very sensitive on the press. It is ran by a dayton 1/15 hp electric motor 5000 rpm 115 volt. It has a snapswitch on the cord and that is also like new. albrecht keyless chuck is like new and has no wobble and opens and closes smoothly. I purchased this setup at an estate sale of a watch repair man/ jeweler along with some other watches and bands. And tools that I will be listing in days to come. PLEASE SEE PHOTOS AS PART OF DESCRIPTION. 336.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14073cc3ca8-0x100-
Westhoff Ultra Sensitive Flush Drilling Machine Hole Drill
Turns on. Works great. Light bulb is burned out.
ALBRECHT 0-1/8 0-3 KEEYLESS DRILL CHUCK WITH SENSITIVE FEED SHAFT ?
This Albrecht chuck is in nice condition. But does have an owners name that's shown in the pictures. I've seen others listed in the past that feature a sensitive feed shaft, but I'm not sure that feature is present with this chuck. The 1/2" shaft slides up and down on the inner shaft about 1/4" Please ask questions since my knowledge of drill chucks is limited. 100% guaranteed.
Hamilton Varimatic sensitive drill press & Tapping Machine Variable speed
Hamilton Varimatic sensitive drill press& tapping machine Variable speed Fully working in great condition! H 30"L 22" W 11" 880 to 9350 rpm maximum work height: 9" table size: 10 x 6 weight: 150 lbs Please feel free to call me with any questions at: Phone: 505-880-1540 Thanks John Purchasing Information: The machine is located in Albuquerque NM There is no charge to load onto buyer’s truck Cleared funds are required prior to shipment Payment methods include VISA/Master Card. Wire transfer, certified check and paypal Posted with
NICE!! ALBRECHT 0 - 1/8" (3mm) SENSITIVE KEYLESS DRILL CHUCK
aims NICE! ALBRECHT 0- 1/8" 3mm) SENSITIVE KEYLESS DRILL CHUCK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Germany by Albrecht. This is a Sensitive Keyless Drill Chuck in GREAT condition. Features: Makes drilling of small holes easy by giving operator fingertip feed control independent ofcoarser quill feed. Spring loaded shank. Hardened and ground. Reduces drill breakage and scrap when large machine tools are used to drill small holes. Specifications: Capacity: 0- 1/8" 3mm) Shank: 1/2" Overall Length: 4-5/16" Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in ... morethis category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! ALBRECHT 0- 1/8" 3mm) SENSITIVE KEYLESS DRILL CHUCK NICE! ALBRECHT 0- 1/8" 3mm) SENSITIVE KEYLESS DRILL CHUCK NICE! ALBRECHT 0- 1/8" 3mm) SENSITIVE KEYLESS DRILL CHUCK Reliable Tool Inc. c 2011 | Powered by
Dumore High Speed Sensitive Jeweler's Watch Maker 'S Drill Press * OBO *
THis is for 1 Dumore High Speed Sensitive Drill Press. Jewelers Watchmakers Drill Press. 17000 RPM 115v 1.0 amp Made in USA Model 16-011 Used Feel free to make offer. Email with any questions you may have. Shipping price includes shipping and handling. Posted with
Albrecht 0-1/8 Drill Chuck With 1/2 Sensitive Shank
Albrecht 0-1/8 Drill Chuck With 1/2 Sensitive Shank. Chuck is in very good condition. No markings or etchings. Shank works but top has popped off. Posted with
Albrecht Germany 0-1.5 micro drill chuck with 1/2 sensitive feed shank
Albrecht Germany 0-1.5 micro drill chuck with 1/2 sensitive feed shank. chuck is in great condition. Barely looks used, no markings or etchings. Rutland sensitive feed shank works but top cap has popped off and needs fixing or maybe you can use this way. Also have a albrecht 0-1/8 with sensitive shank on auction if interested. International customers are welcome: please use usps. com to calculate desired standard or expedited shipping to your country.
Sensitive Drilling Drill Press Sigourney M-100 Pratt & Whitney
For sale is a used Sensitive Drilling Machine by Sigourney- Model 100 s/n 1486 Powers up and runs fine. You get what you see in the photos. Pretty heavy. Might have to ship on a small pallet. Buyer pays for shipping. Thank you for looking
SMALL ALBRECHT GERMAN DRILL CHUCK w MICRO SENSITIVE FEED ATTACHMENT 0-1/8" *6
SMALL ALBRECHT GERMAN DRILL CHUCK w MICRO SENSITIVE FEED ATTACHMENT 0-1/8" Info/Sizes: Excellent condition EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Payment due within 48 hours of auctions close. If you are going to bid on other auctions contact me for a payment extension. All items are used and my have engraving or identification markings from previous owners unless noted differently under"Info/Sizes" There may also be imperfections that I did not detect thus my EZ return policy. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of ... morefuture auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
DuMORE NO. 80-211 PRECISION SENSITIVE JEWELERS WATCH MAKER DRILL PRESS 17000PRM
DuMORE NO. 80-211 PRECISION SENSITIVE JEWELERS WATCH MAKER DRILL PRESS 17000PRM Specifications: Model No. 80-211 RPM: 17000 Volts 115 Amps: 2.4 Size: 8" x 15" x 5" Travel: 3 3/4" Table Size: 3 1/2"
Vintage Machinist Sensitive Hand Drill Speed Adapter
Vintage Machinist Sensitive Hand Drill Speed Adapter 800x600 Vintage Machinist Sensitive Hand Drill Speed Adapter· For use with No. 0 Chuck. Includes Jacobs No. 0 chuck and key· Shows no signs of use. Just light signs of handling. Not sure how it works. The post obviously fits in the drill press and it has a spring in it allowing the user to pull down the drill bit by hand. The knurled wheel turns freely. From the estate of a clock maker. He invented a number of clock movements. Including a dual pendulum clock. PLEASE ASK QUESTIONS BEFORE BIDDING. IMPORTANT: My items are sold AS-IS subject to the description. If your questions are not answered by the description. Ask. If you ask a question answered by the description, I’ll ask you to read it. If you hope the item is better than described, wonderful, just don’t expect it. E-bay Required ... moreNotice to International Bidders: Import duties. Taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy. See Shipping information below. There may be charges collected by the shipping/delivery company when you receive or pick an item up. Don't confuse them with more shipping charges. We follow international regulations. We don't mark items below value or call them"gifts. Please ask questions before bidding. I am happy to combine shipping. NOTE: If you are bidding on more than one of my auctions. Wait until all have closed and I send you a combined invoice to save you shipping costs. SHIPPING: Shipping in the Contiguous 48 states with delivery confirmation is $6.25. Shipping may reflect a handling charge. International shipments: Use the shipping calculator to determine charges for international shipping. IMPORTANT NOTICE: When shipping is stated to be Priority Mail: VERY IMPORTANT- If PayPal or e-bay shipping will not allow me to print Priority Mail Labels for Non-Small Flat Rat
Dumore 37-011 Sensitive Drill Press
Dumore 37-011 drill press. In good condition. Two speed/belt change, Gilmer belt drive. Heavy cast iron base. Solid column. Net weight 61.5 lbs. Quill handle adjusts radially. Quill counter balance- tool less adjustment. Delivery signature confirmation required. May ship in multiple boxes.
jacobs micro sensitive drill adapter and mini drill set
PRECISION SENSITIVE DRILL ADAPTER* JACOBS CHUCK* FINGER CONTROL TO REDUCE BREAKAGE*AS AN EXTRA. WE INCLUDE DRILL SET#61-80
Precision Sensitive Drill Arbor
This is a precision finger sensitive drill adapter for a#30 J0. 0"1/8" Albrecht drill chuck used for drilling very small holes shank diameter is 1/2" This item is like new don't think it's ever been used. Posted with
Dumore 16-011 High Speed Sensitive Jewelers Watch Maker Drill Press
Used Dumore 16-011 sensitive drill press 17.000 rpm 110v 1/16 HP. Jacobs 0-5/32" chuck with wrench and foot control. Drill runs fine, it is in good condition. Couple of drill marks in the table and has previous owners name engraved on it. Has some scratches and the cord end has been taped. This piece can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri in Illinois. Please check out my other auctions. Thanks for looking. This item is for sale locally, so the auction may be cancelled due to a local sale. Please read our feedback, 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction to avoid neg feedback. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified, so please ask questions. Due to items ... morenot being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14333258831-0xe3-
FOSDICK 4FT SENSITIVE RADIAL ARM DRILL
FOSDICK 4FT SENSITIVE RADIAL DRILL IN PERFECT WORKIGN CONDITION.PULLED FROM A CLEAN DEFENSE CONTRACTOR SHOP.APPROX. 5.000LBS BUYER RESPONSIBLE FOR SHIPPING AND/OR PICK UPWE WILL LOAD TRUCK FOR NO EXTRA CHARGE.
Electro Mechano 8" Heavy Duty Sensitive Precision Drill Press
Up for sale today is an Electro Mechano precision drill press. Model number 105W. This is the heavy duty model with the 1/8 HP motor rather than the standard 1/10 HP motor. It has a spindle stroke of 1.5" and it travels freely without ANY side play, roughness, tight spots or sloppiness. It has both micro(4 to 1 reduction) and direct spindle feed. It is in outstanding condition and appears to have seen very little work. It has a sliding spindle speed adjusting lever mounted on the front for quick and easy speed changes. This model has a speed range of 2500 RPM to 15,000 RPM. The base working surface area measures 7" x 12" is constructed of cast iron and is free of damage. It has the original 5/32" capacity Jacobs Chuck which works fine. The motor is quiet without bearing noise and uses a solid state speed controller. There ... moreis a front located depth stop. There are no cracks or welded repairs on the cast frame of this drill press. The power cord and plug are original equipment and are fine without cracking of the rubber cord cover. There are no visible past electrical repairs. Cosmetically. It has numerous scratches to the bare metal in an area just to the left of the nameplate. It had a decal over this area that had obviously been removed rather roughly several times. It also has engraved numerals just below the nameplate, handwritten numerals on the base plate and a brass Navy property ownership emblem is attached to it also. It is very clean overall and is free of any oil, grease or rust. I would imagine that a person would have to look long and hard to find another used machine of this caliber. This machine is 22 inches tall and weighs just under 40 pounds. It will be shipped with the base plate removed. I take my shipping duties seriously and rest assured it will be well packed and protected. Shipping will be provided by the USPS and the costs are based on the calculated rate depending on your ZIP code. The package size is roughly 24 x 8 x 14 at 44 pounds. I normally offer hassle-free return
Vintage Jewelers Dumore Micro Precision High Speed Sensitive Drill Press,No Resv
Estate Sale Find Being sold as found Vintage Jewelers Dumore Micro Precision High Speed Sensitive Drill Press with speed control foot switch Has a Jacobs#0- 5/32 chuck with no key. works great. Needs a little Cleaning. No reserve. See pictures Ask questions. Needs a chuck key(not included)
Dumore 16-021 High Speed Sensitive Jewelers Watch Maker Drill Press Excellent
Up for sale is a Dumore Sensitive Drill Press in nearly new condition. It is clean as a pin being free of dirt. Grease, cuttings, etc. It is very quiet during operation without bearing or vibration noise. The paint has scratches above the on/off switch as shown in the photo. These scratches is the only damage on this machine. It does have a US Government NSN badge on one side as shown. It has a Cushman drill chuck but I do not have a chuck key for it. The table is flawless in appearance and operation. The control knobs are free from scratches or blemishes. The cast base is fine and the paint is also excellent. The power cord and plug are both original and new in appearance without repairs. The main shaft is unscratched and free of rust. I also have for sale, in a separate auction, a Dumore foot operated variable speed controller for this ... moreor any other 115V machine. Overall, this drill press would be hard to top other than by a brand new machine. I doubt if it was ever used more than a couple of times if at all. Close examination of the drill chuck shows zero wear. No signs of a slipped chuck key on the gear teeth or wear on the key hole. I would also venture to say the scratches on the top part of the machine came from someone who, wearing a ring, picked it up for cleaning the surface it was sitting on. Also included with this sale is a nice assortment of Cobalt and HSS drill bits. These drills are unused since being reground at US Too Grinding near St. Louis. They will easily drill stainless and tool steel as well as hard alloys. Please compare this machine to others being offered for sale. It is modestly priced when compared to a new unit. I will remove the base. Motor and table from the support shaft for shipping. It requires a allen wrench to assemble which is included. Included also is a parts list and operation guide. Shipping will be by USPS at a flat cost of $25 to the continental US. AK and HI pays $30. All sales are final, no returns will be accepted but I will work with a buyer if there is a problem. T
DUMORE 16-021 HIGH SPEED SENSITIVE DRILL PRESS 120V-AC 1.0A AMP B338102
Product Specifications. Brand: DUMORE, Condition: Used, Model: 16-021, Type: Drill, Supply Voltage: 120 V-AC, Amperage: 1.0 A AMP, Shipping Weight: 19 lbs, Shipping Dimensions: 8 x 5 x 16 in, SKU: B338102(EAV) Category: Tools· Electric Tools, Additional Notes: HIGH SPEED SENSITIVE PRESS, Product Photos. $500 USD We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship items within 1 Business Day of receiving cleared payments. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is ... more3:00PM Eastern Time. We only offer Collect Shipping via UPS. If the item is to be shipped via Freight. Please contact us for a shipping quote. You may also choose to have your shipment picked up by your carrier. We will palletize, strap and shrink-wrap your shipment. We offer a 7 day courtesy holding period for our clients, but shipments are subject to storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence as we put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer an amazing buying experience to all our customers. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. NRI is
VINTAGE SIPP MACHINE CO. QUICK CHANGE SENSITIVE DRILL PRESS BROCHURE
5 DAY AUCTION! VINTAGE SIPP DRILL PRESS BROCHURE THE SIPP MACHINE CO. NJ) QUICK-CHANGE SPEED SENSITIVE DRILL PRESSES MODELS#1. 2, 3, 4, 5, 6, 7, 8 8 PGS. UNDATED, LOOKS LIKE 1930s YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H $6.00 PRIORITY MAIL. COMBINED SHIPPING AVAILABLE. PLEASE WAIT TO TO INVOICED FOR MULTIPLE PURCHASES. INTERNATIONAL BIDDING REQUIRES APPROVAL. PHOTOCOPIES ARE NOT AVAILABLE PAYMENT EXPECTED WITHIN 3 BUSINESS DAYS OF AUCTION CLOSE SECOND-CHANCE OFFERS AVAILABLE ON SOME ITEMS
ALBRECHT KEYLESS SENSITIVE HAND FEED DRILL CHUCK 0-1.5, NO RESERVE!
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! ALBRECHT KEYLESS SENSITIVE HAND FEED DRILL CHUCK 0-1.5. NO RESERVE! This is a NO RESERVE auction for a used Albrecht keyless sensitive hand feed drill chuck. Capacity 0-1.5 mm. It is in excellent condition. Has a ⅜” shank which shows some wear, and is ready to use. No engraving. Get a deal on a very expensive chuck-it’s almost three hundred bucks on Amazon! Condition: Used See listing. andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Usps Priority International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 8 oz. Shipping and Handling: Customer Service Policy: All items going within ... morethe continental USA shipped at cost of postage. As best as I can calculate, via Priority Mail-unless otherwise specified in the listing. I do not add a handling charge. All items will be tracked to verify delivery. Generally shipped within 0-1 days of end of auction, although I cannot be responsible for weather-related delays. Cannot always ship on Saturdays, payment received late Friday or over the weekend will result in item being shipped the next business day, usually Monday, occasionally Tuesday if there is a holiday. Items sent via US mail only, no UPS or FedEx. toolshedofma Your satisfaction with anything you buy from me is most important. And accordingly, I accept returns for any reason, if you contact me within 30 days of receipt of item. I will refund your entire purchase price plus postage both ways if for any reason your purchase proves to be unsatisfactory. THERE IS NEVER A NEED TO LEAVE NEGATIVE OR NEUTRAL FEEDBACK! Just let me know the item is on the way. I encourage you to add insurance. Particularly on the more expensive items. I do track every shipment, so can tell when it is delivered. If it's lost, it's on your dime. Unless you have insurance. Also. P
Albrecht 0 - 1.5mm Sensitive Feed Drill Chuck
German made Albrecht 0- 1.5 mm(059" Sensitive Feed Drill Chuck on a 1/2" Albrecht Arbor. Feed and chuck work smoothly. This was my personal chuck since new and has low hours usage. Free Priority Mail shipping.
Pair of Drill Chucks - SENSITIVE HAND DRILL FEED CHUCK & STANDARD DRILL CHUCK
SENSITIVE HAND DRI8LL FEED CHUCK: 1/2" travel. 1/2" straight shank w/Jacobs Key Chuck No. 0, capacity 0-5/32" w/chuck key(fits both) STANDARD DRILL CHUCK w/ 1/2" straight shank. W/Jacobs Key Chuck No. 0, capacity 0-5/32" Very Good Condition- w/ light personal markings.
Albrecht Touch Sensitive Keyless drill chuck 0-1.5
Albrecht Touch Sensitive Keyless drill chuck 0-1.5 very clean
ALBRECHT KEYLESS SENSITIVE DRILL CHUCK WITH ATTATCHMENTS 0-1,5
ABOVE AUCTION IS FOR AN ALBRECHT GERMANY SENSITIVE DRILL CHUCK. WITH ATTATCHMENTS. CLEAN. IN GOOD CONDITION. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-144aa8505a8-0xed-
SERVO PROGRAMMABLE SENSITIVE MICRO DRILL PRESS
This is a Servo model 7000 micro drill press with a model 708 Servo programmable controller. 0- 20.000 rpm. 1/8" drill capacity. This unit is fully programmable for start and stop depths, feed rate, peck cycle, hold cycle and other options. A tap on the foot pedal initiates the drill cycle. I have tested the controller and it works perfectly. Programming instructions are included. This unit operated well in a bench test but the belt is a little loose. A new belt from Servo is less than $10.00. More details at. Payment via Paypal only unless alternate arrangements are made before bidding. No handling charge on orders shipped to US addresses. A $20.00 handling charge will be added to orders shipping outside the USA. Local pick up is an option on all items. I DO NOT MAKE SECOND CHANCE OFFERS. Returns accepted only if item is defective or ... moreis not as advertised. Buyer is responsible for return shipping charges. Pack items well and insure for full value. I will not accept returns that are damaged in return transit. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-144b016325a-0x102-
DeWalt DW260K Heavy Duty VSR Corded Drill - Depth Sensitive - DW260 Bundle
Shipping& Handling We ship within the 1 business day(usually less than 24 hours) after receipt of the payment. Each item is packed carefully to make sure it gets to you in the condition described. Each package comes with a tracking number. WE ONLY SHIP TO THE 48 CONTINENTAL UNITED STATES NOTE: We do not ship on weekends or holidays. Sales Tax is charged for items shipped within the state of Indiana. Rates: USA: Very by weight via USPS Priority Mail with Delivery Confirmation Payment We accept PayPal. You must have funds in your PayPal account. Have the account linked to your bank, or your credit card. Shipping address must be PayPal confirmed. Terms Of The Sale Payment is expected within 5 days of auction close. Unless prior arrangements had been made. If payment is not received within 7 days a Non-Paying Bidder(NPB) warning will be filed ... morewith eBay. A negative feedback will be left if the buyer does not answer the NPB warning within 10 days. We are reasonable and as long as the communication channels are open and clear, We have no problems accommodating special circumstances. By entering a bid. You are entering into a legal binding contract to purchasing the item described above. Thank you for stopping by and HAPPY BIDDING!
Original Fosdick sensitive radial drill instructions for install/operating, 1963
Original Fosdick sensitive radial drill instructions for install/operating. 1963 Includes LeBlond invoice from 1973 Some bends. Smudges, and markings Refunds will be given with the buyer paying shipping back. Thanks for bidding!
Albrecht 0 - 1/8" Sensitive Feed Drill Keyless Chuck, FREE US SHIPPING
Albrecht 0- 1/8" Sensitive Feed Drill Chuck. With Sierra American 1/2" shank sensitive feed Excellent Condition! Free Continental US shipping(Priority mail)
Sensitive or Precision Jewlers Drill Press
About 14" tall. And about 8 Lbs. I can find no labels or manufacturers marks. Base is cast aluminum with( A-3) on bottom. Headstock, table, and table casting is solid Aluminum, Motor runs good, but could use a new cord. I have no belt for this, and have not used it. Table dia. is 3 1/2" Chuck is Jacobs No-0, zero to 5/32 capacity. Looks to be ball bearings in spindle. Unit is disassembled for shipping as you see in photo.
DUMORE NO. 16-011 HI-SPEED SENSITIVE JEWELERS WATCH MAKER DRILL PRESS 17000 RPM
DUMORE high speed sensitive drill press. For Jewelers, watchmakers, clock makers and hobbyist. It is in very good working condition. Includes chuck key. 14 1/2 in. high. Base is 5 x 8 in. Table 3/12 in. Adjustable space of table to chuck 4 in. max. Model# 16-011. AC-DC. RPM: 17.000. HP: 1/16. Volts: 110. Hz: 0-60. Amps: 1.0. Weight: 11 1/2 LBS. See photos. SEE MY OTHER ITEMS FOR SALE. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144ef92acd3-0x111-
DUMORE PRECISION SENSITIVE JEWELERS DRILL PRESS WITH FOOT SPEED CONTROL
DUMORE Hi-Speed Sensitive Drill No. 16-011 Perfect condition and very clean. 1/16 HP. 17000 RPM Foredom Foot Speed Control Model EC-1 Both are tested and in working conditions.
Hamilton Benchtop Varimatic Sensitive Drill Press Machine +Hoover 1/4HP AC Motor
Search our eBay Store! Hamilton Benchtop Varimatic Sensitive Drill Press Machine +Hoover 1/4HP AC Motor SKU: JV-BIN-C-HAMILTONDRILL Condition: For parts or not working Packaging: Pallet/Skid Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 Hamilton Benchtop Varimatic Sensitive Drill Press Machine with Hoover 1/4HP 725RPM Ball Bearing AC Motor BEING SOLD AS-IS FOR PARTS OR REPAIR· Hours: 09312· Unit powers on. The lamp turns on. The handle on the cabinet door is functional. The lever to lower/raise the drill is missing. Rust/grime can be found throughout the unit. Chips/dents can be found throughout ... morethe unit. One of the side knobs is noticeably chipped. Dimensions(L”W”H” 27 ¼* 19 ½* 62 ½ approx. As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 6. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item
Dumore Series Precision Sensitive Drill Press 98776
SquareTrade © AP6.0 UP FOR AUCTION Dumore Series Precision Sensitive Drill Press THIS WAS PLUGGED AND APPEARED TO POWER ON I KNOW NO WAY OF TESTING THIS SO AS IS PLEASE CHECK PICTURE FOR ANY MISSING PARTS OR COSMETIC DAMAGE CORD WAS FABRICATED FOR A FOOT SWITCH BUT NO LONGER THERE SO HAS BEEN FIXED WITH ELECTRICAL TAPE BUT CAN ADD FOOT SWITCH TO CORD PLEASE ASK QUESTION BEFORE BIDDING AND PLEASE LOOK AT PICTURES OR ASK FOR ANY ADDITIONAL INFORMATION I HAVE MORE VINTAGE EQUIPMENT LIKE THIS ON MY OTHER AUCTIONS COMES AS PICTURED AS IS NO RETURNS Powered by The free listing tool. List your items fast and easy and manage your active items.
DuMORE NO. 16-011 PRECISION SENSITIVE JEWELERS WATCH MAKER DRILL PRESS 17000PRM
DuMORE NO. 16-011 PRECISION SENSITIVE JEWELERS WATCH MAKER DRILL PRESS 17000PRM Specifications: Cat No 16-011 NO 8226 BA 13725 volts 115 amps 1.0 no load rpm 17.000 1/16 hp
Sensitive Drilling Machine Drill Press Sigourney M-100
Used Sensitive Drilling Machine Drill Press Made by:The Sigourney Tool Co Model: M-100 Has new Albrecht keyless drill chuck 0- 1/4" capacity Shipping: Local pick-up. Posted with
WESTHOFF MACHINE CO. ULTRA SENSITIVE DRILL - MODEL 100 -1
Great condition
SENSITIVE DRILL No. 2 FLOOR TYPE MANUAL NAVY DEPARTMENT 1941 LELAND-GIFFORD CO.
Sensitive Drill No.2 floor type instructions booklet. Leland-Gifford Co.Worcester.MA-1941 Used manual in good condition.With some wear.Please see pictures. Thank you for looking.Any questions please e-mail me.
Dunmore Series 16 Sensitive Precision Drill Press Jewelers Watch Maker USA Made
These are very expensive drill presses. This one is good shape and operates fine, the grounded plug is intact(meaning someone didn't break off the ground lug) and it includes the chuck key. From the manufacturer: Compact and light weight. This bench type sensitive drill press is a rigid, stationary unit designed to consistently drill exceptionally precise small holes. Large, knurled adjustment wheels provide for easy, finger tip control. The hand fed sensitive drill press table moves work to the drill while the hole depth adjustment collar maintains selected depth. A three-inch throat and swing away table adds to the versatility. Accessories are available to control drill speeds. The Series 16 sensitive drill press includes an 8’ cord and 3-prong plug. Manual available by click icon- Please see picture(s) below. They are actual pictures ... moreof the listed item. Shipping: Still looking for a box to ship it. I will update the shipping cost when I do Click the image(s) below(and above) for a much LARGER picture.
RV-1096 FOSDICK 4FT SENSITIVE RADIAL DRILL 3HP. BED: 42" X 21"
Description Up for sale is a ERC inventory number RV-1096. FOSDICK 4FT SENSITIVE RADIAL DRILL 3HP 230/460V. 3PH BED: 42" X 21" 43" FROM BASE TO CHUCK 6260LBS 8' X 4' X 8' FOR SHIPPING DUE TO SIZE AND WEIGHT. THIS ITEM MUST SHIP VIA COMMON CARRIER OR FLATBED. PLEASE EMAIL WITH ZIP CODE FOR FREIGHT QUOTE Condition of Item This item is in used condition. This item/lot is being offered“AS IS” with no written. Implied or expressed warranty nor other guarantee as to its condition or fitness for use. Unless otherwise stated(see known deficiencies) the condition of this item/lot(or it’s fitness for any use/purpose) is unknown. Postage and Handling All items are shipped out United Parcel Service(UPS) Price based upon weight and location. Equipment Recovery Corp can ship to a PO Box. With US Postal Rates applying. To determine ... moreshipping charges there is a UPS Ground Shipping Calculator attached to our auctions. ERC will ship UPS to Canada with buyer responsible for all customs and international fees applying. Freight Items over UPS weight and size restrictions will be sent via common carrier. Customer is responsible for the freight charge. Unloading freight and/or picking up freight at terminal if possible. ERC will work with customer in trying to find the most cost effective way of shipping. ERC will not ship common carrier Internationally. Store Hours/ Local Pickup Equipment Recovery Corp. is open Monday through Friday 8am-4pm. Saturday by appointment. Any of our items can be picked up to save on shipping charges. 800-372-2408. Invoicing Invoices will be sent normally within 24 hours of auctions end. ERC has an Ebay store where more inventory is listed and offered for sale. Please check out our great deals on used equipment each week. Customer Service OUR GOAL IS COMPLETE CUSTOMER SATISFACTION. Our items are used and sold“as-is” However we strive to make every customer happy and satisfied. 800-372-2408. Created by eBay Blackthorne ver. 3.2.172.0
ALBRECHT KEYLESS SENSITIVE HAND FEED DRILL CHUCK 0-1.5. Excellent
You are bidding on a Near New condition Albrecht. Sensitive Hand Drill Feed, Keyless Chuck. Albrecht part# 0-1.5 Mount: 1/2 inch diameter extendable straight shaft. extends approx. 3/4 on an inch. Made in Germany.
CARTER'S Sensitive Small Hole Drill
Comes with operating instructions. For drilling extremely small holes[001" 010 dia. some light pitting, see pictures, box has a broken hing. Look and ask questions
Hamilton Vari M atic Speed control Sensitive Drill Press - Precision
hamilton vari matic speed control sensitive drill press.in great condition.no rust.good belt.great machine.never been repainted.works good. it is heavy pick up would be best.in bowerston oh 44695.will ship ups in 2 shipments base and motor will be taken off and shiped in one box and the head in another.
Refurbished Hamilton Bench Top Varimatic Sensitive Drill Press ClockMakers Tool
HAMILTON BENCHTOP SENSITIVE DRILL PRESS MODEL? ESTATE SELL ITEM PRODUCTION MACHINE FROM THE HERSCHEDE HALL CLOCK COMPANY STARKVILLE MS. HAS BEEN STRIPPED AND CLEANED REFINISHING IS BEING DONE TODAY IDLER PULLEYS COULD USE REPLACING OTHERWISE IN VERY GOOD CONDITION GOOD STRONG MOTOR AND BELT INCLUDED
SERVO Precision Drill Press Sensitive Standard Variation Variable 7000 Series
SERVO Precision Drill Press Sensitive Standard Variation Variable Bench Items Included: Servo Precision Drill Press- Model: 7060- Serial: 5331- 60 CYC. 120 Volts- 2.5 AMPS Specialty-surplus# 0514-13 Unit was powered on. Tested and appears fully functional! We make every effort to communicate all of the details to make an informed decision. However, verification and perceived value may vary. If a condition or features are provided, they are ONLY done so as a COURTESY. You as a buyer are expected to know what you are purchasing and understand that all items are sold“as is. Where is, with all faults” The more informed you are. The better your purchase decision. Since your needs are unique to you, your evaluations will be different from others. This item was purchased for resale and was NOT used by seller. This item can be previewed and inspected ... moreby appointment only at our location in Chatsworth. Since I am not a dealer. This units is sold"As-Is" with"No Warranties" and"All Sales are Final. Shipping Information: 1- Merchandise will be held until funds clear. 2- We will ship National& International USPS/ UPS. 3- We combine shipping when you buy multiple items. Please see shipping calculator to calculate your shipping cost. Or, if you email the location information we will send to you the best shipping price. 4- Refunds are accepted ONLY if the item was not as describe in the auction. Buyer must contact us at(818) 734-9043. In 3 days of receiving the item. 5- The Buyer is responsible for return shipping charges Normal 0 false false false EN-US X-NONE X-NONE
Dumore Sensitive Drill Press Model No. 16-011 Needing Motor (Stand is Fine)
Dumore Sensitive Drill Press For Jewelers. Watchmakers etc. NOT WORKING NEEDS REPAIR. Dumore Sensitive Drill Press Not Working Needs Repair DUMORE Precision Drill Press Model No. 16-011&8212 Jacobs Chuck No. 0 Condition: Needs Repair" Stand and table work fine. Motor runs but makes all kinds of noise. bearings probably no good. No returns. Item is described as'not working' Many of these Dumore Corp sensitive drill presses were made in the 1960's. and are 50 plus years old. Dumore does not have parts for them and fixing a motor of this age is extremely difficult if not impossible to do. Replacing the motor assembly with a'modern' Dumore motor would give someone a drill press that would be extremely close to any'new Dumore' press. and far superior to any of the'older' 40-50 year old presses which ... moreare being sold on the internet. The high quality standards of Dumore motors was so motors could last DECADES. not Centuries. and a tip to the wise. would be. to be sure to purchase a dumore motor made in recent times. as they are great motors. And the newer motors are of coarse rebuildable and have replacement parts. The stand portion of this unit seems to be in good condition. and the table goes up and down. As it should. Attached to the motor is the Jacobs chuck assembly and a chuck key is included. I can not guarantee anything about this drill press. other than'it does not work' and is in need of repair. Motor is shot. needs replacement or repair. Shipping: This will be sent via UPS ground. Buyer will pay shipping costs of $25.00 which shall include insurance. And tracking. I ship to 48 mainland states only. No Alaska or Hawaii shipping. No International shipping. CAUTION: You must have an address that UPS can deliver. NO PO BOX. No Alaska, no Hawaii, no International shipping. I provide 14 day Cash Back Returns. Buyers pay the cost of return shipping. To See ALL MY AUCTIONS CLICK HERE About This Seller ~&nbsp Click Here to Learn About this Seller Powered by The f
levin 8MM collet, sensitive drill press
Extremely hard to find Levin Sensitive drill press. Glassy smooth action on table. Great for drilling holes and many decorative finishes on pocket watches and metal work in general. Gunsmiths. Watchmakers, fishing lure and fishing reel manufacturers, micromachine shops, micro machine shops, will love this machine. 8mm WW collet in the headstock makes it extremely versatile. No collets are included. The drawbar works perfect. There is a small nick in the headstock pulley that does not affect anything. The paint is not perfect. I will take apart for easy and safe shipping. Unit is heavy and I do not want to have a problem in shipping with damage. Putting the motor back on will involve putting four(4) allen head screws back into the base unit. Brand new drive belt. Very grippy. The speeds are changed using the stepped pulley. Easy to install ... morea DC variable speed motor if you want. The overall accuracy is very accurate. The paint is average for the age. Questions, call Jeff 7am to 10pm CST@414-305-1555. Buy is now includes shipping. No international shipping. Thanks for your interest in my sensitive drill. Jefff
AVEY HIGH SPEED SENSITIVE DRILL PRESS - 800 to 8000 rpm
We are offering a Used Avey High Speed Sensitive Drill Press. 15" swing, Model 1/2 Heavy, Serial#25441. Motor 2 speed. 1/ 1/2 hp, 220/440 volts, 3 phase, Spindle Speeds: 8)800,1050, 1600, 2100, 3000, 4000, 6000, 8000 rpm. MADE IN THE USA!With/ keyless chuck, production table, built in work light, transformer, counterbalanced- sensitive feed handle. This unit is very heavily built. Reasonable freight may be available into parts of Nevada and California. Please email any questions. Thanks for looking!
Dumore Custom Sensitive Drill Press
Dumore sensitive drill press. professional custom made press. Works great, heavy steel base, very well made. the Dumore grinder is in great shape. with 0-5/32 Jacobs Chuck. Its heavy around 22 lbs.
Servo Precision Sensitive Drill Press - MODEL-7070
Servo Precision Sensitive Drill Press- 7" Swing- Excellent! Technical Specifications: 110 Volts/ 1Phase Horsepower(HP) 0.10 Stand Type: Bench Machine Type: Drill Press.
ALBRECHT GERMANY 0-1/8" DRILL CHUCK with 1/2" dia SENSITIVE FEED ARBOR *B
See my other auctions for more Albrecht drill chucks in other sizes I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit ... moremy store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
4' Arm 12" Col Dia Fosdick Sensitive RADIAL DRILL, Elevating Tbl, 3 HP, #4MT
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 4' Arm 12" Col Dia Fosdick Sensitive RADIAL DRILL. Elevating Tbl, 3 HP, 4MT Ref# 142673 iammdna XDRLRA 4' FOSDICK SENSITIVE RADIAL DRILLING MACHINE S/N: 18084. NEW: 1955 SPECIFICATIONS: SPINDLE ... moreTO FACE OF COLUMN. 48" MAX. SPINDLE TO FACE OF COLUMN. 9" MIN. DIAMETER OF COLUMN. 12" HORIZONTAL TRAVEL OF HEAD ON ARM. 39" BASE TO SPINDLE MAX.MIN. 44" 32" TABLE TO SPINDLE MAX. 23-1/4" TABLE TRAVEL VERTICAL. 16-1/2" TABLE WORKING SURFACE. 24" X 48" BASE WORKING SURFACE. 30" X 53" SPINDLE TRAVEL IN HEAD. 10" SPINDLE MORSE TAPER. 4MT SPINDLE SPEED RANGE(9) 60- 1200 RPM SPINDLE FEEDS(4) 014. 002, 004 AND.008 APPROXIMATE WEIGHT. 6.100 LBS. APPROXIMATE DIMENSIONS. 78"L x 30"W x 95"H EQUIPPED WITH: T-SLOTTED TABLE AND BASE-POWER ELEVATION OF TABLE ON COLUMN. 3 HORSE POWER SPINDLE MOTOR. INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE CONDITION: EXCELLENT* Machine Location: HARRISON. NJ Click Here For More Fosdick Machines Click Here For More Drills. Tappers& Jig Borers- RADIAL ARM DRILLS(s) Questions about this Machine? Call David at(800) 873-6224 ext 7570
4'12" FOSDICK "SENSITIVE" LAYOIUT RADIAL DRILL - #27148
4'12" FOSDICK"SENSITIVE" LAYOUT RADIAL DRILL#27148 Serial No 19973. Model"SENSITIVE" EQUIPPED WITH: Rectangular Table(Rotating& Swiveling) Coolant System(Built-In) CATALOGUE SPECIFICATIONS: Arm Length. 4' Column Diameter. 12" Horizontal Head Travel On Arm. 39" Vertical Spindle Travel In Head. 10" Vertical Table Travel. 16.5" Spindle-Nose To Base. Minimum. 34.25" Spindle-Nose To Base. Maximum. 44.25" Spindle-Nose To Table. Maximum. 23.25" Column-Face To Spindle. Minimum. 9" Column-Face To Spindle. Maximum. 48" Table Working Surface. W x L. 24" x 48" Base Working Surface. W x L 30" x 53" Spindle Nose Diameter. 2" Spindle Taper. 4 MT(18) Spindle Speeds. Range. 87-3500 RPM Extreme Height. Head& Arm Extended. 8'6" Weight. Approximately. ... more6000 LBS PRICE: F.O.B. OUR WAREHOUSE. $3.950.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-146f76f5c3f-0x10e-
LEVIN Precision Micro Jewelry Watchmaker Drill Press Drilling Machine Sensitive
LEVIN Precision Micro Jewelry Watchmaker Drill Press Drilling Machine Sensitive marked 1240 rpm. No chuck, RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14709b1ab36-0x111-
CLEAN! ALBRECHT 0-1/8" KEYLESS DRILL CHUCK w/ 1/2" SENSITIVE FEED ARBOR
Made in Germany by Albrecht. This is a Keyless Drill Chuck w/ Sensitive Feed Arbor in GREAT condition. Model# 30 J0 Specifications: Capacity: 0- 1/8" Shank: 1/2" Overall Length: 4-1/4" Comes exactly as shown in pictures.
ACIERA SWISS SENSITIVE DRILL - INVENTORY 4598
ACIERA SWISS SENSITIVE DRILL- INVENTORY 4598