|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Medina, United States Hossfeld no.2 Bender setup with all the tooling shown.
Buy It Now
Free Shipping Condition: Used Location: Yorktown, United States 2” pipe die 13B4 from a Hossfeld no.2 Universal Bender. Barn fresh could use a good cleaning.
Buy It Now
$399.95 Shipping Condition: Used Location: Downingtown, United States Main bender. Some pieces as shown in the photos. Dies not included.
Buy It Now
Free Shipping Condition: New Location: Green Bay, United States Hydraulic Tubing Bender Plans. This hydraulic bender was designed for motorcycle and race car fabricators ! There is no technical assistance with these ... moreplans. Builder accepts all liability and takes full responsibility for final design, construction and operation, including safety and compliance with state and local laws or acts.
Buy It Now
$19.30 Shipping Condition: For parts or not working Location: Ionia, United States #2 Hossfeld Bender part of square tube bending die set. This is a cut off from a 1 inch square tube back block. Has number 5 stamped in it near the cut ... moreoff end.Could be used to fabricate your own custom die. Comes as shownI will combine shipping on multiple ordersPlease ask any questions before purchasingPlease see my other listings
Buy It Now
$18.78 Shipping Condition: New Location: Winona, United States ONLY FOR THE HOSSFELD NO. 2 BENDER. #20697 23B YOKE &. #20705 24B THUMB NUT INCLUDED.
Buy It Now
$8.78 Shipping Condition: New Location: Winona, United States ONLY FOR THE HOSSFELD NO. 2 BENDER. #20078 16B BENDING DOG &. #20705 24B THUMB NUT INCLUDED.
Buy It Now
$7.87 Shipping Condition: New Location: Winona, United States ONLY FOR THE HOSSFELD NO. 1 BENDER.
Buy It Now
$10.00 Shipping Condition: Used Location: Santa Fe, United States #25 Gauge for Hossfeld #1 bender. Excellent condition.
Buy It Now
$14.50 Shipping Condition: Used Location: Coloma, United States HOSSFELD BENDING DIES FOR 1-5/8 TUBE.
Buy It Now
$8.95 Shipping Condition: New Location: Winona, United States ONLY FOR THE HOSSFELD NO. 1 BENDER.
Buy It Now
$19.87 Shipping Condition: New Location: Winona, United States For the #2 bender only. 1" OD Round Tubing X 4" centerline radius. Set includes form die, draw block, and back block.
Buy It Now
$97.92 Shipping Condition: Used Location: Holyoke, United States Possibly in two boxes.
Buy It Now
$7.87 Shipping Condition: New Location: Winona, United States HOSSFELD PART NUMBER 20091. ONLY FOR THE HOSSFELD NO. 2 BENDER.
Buy It Now
$67.74 Shipping Condition: New Location: Winona, United States Set includes tube form die, draw block, and a bolt on back block (bolts to the oscillating block on the #2 Hossfeld bender). For the #2 bender only.
Buy It Now
$33.70 Shipping Condition: Seller refurbished Location: Ionia, United States #2 Hossfeld Bender 52B Inner Radius Block 5" &7" Angle Iron Leg Outward flat stock edge bend diehas dual working Face 5 inch radius and 7 inch radiusAppeared ... moreunused when I got it, used it one time. Was cleaned up and painted. Comes as shownI will combine shipping on multiple ordersPlease ask any questions before purchasingPlease see my other listings
Buy It Now
$10.00 Shipping Condition: Used Location: Santa Fe, United States #25 Gauge for Hossfeld #1 bender. Excellent condition.
Buy It Now
$26.18 Shipping Condition: New Location: Winona, United States For the #2 bender only. 1-1/4" OD Round Tubing X 3" centerline radius. Set includes tube form die, draw block, and back block.
Buy It Now
$7.87 Shipping Condition: New Location: Winona, United States ONLY FOR THE HOSSFELD NO. 1 BENDER.
Buy It Now
$10.00 Shipping Condition: Used Location: Santa Fe, United States # 26 Sharp Square Die for Hossfeld #1 bender, excellent condition, still has factory paint!
Buy It Now
$8.87 Shipping Condition: New Location: Winona, United States HOSSFELD PART NUMBER 20097. ONLY FOR THE HOSSFELD NO. 2 BENDER.
Buy It Now
$16.30 Shipping Condition: Used Location: Norwood, United States Hossfeld No 2 Bender Die 13B4 Pipe Die 2" Radius Part Number: 20065 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! ... moreI have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271
Buy It Now
$7.87 Shipping Condition: New Location: Winona, United States ONLY FOR THE HOSSFELD NO. 1 BENDER.
Buy It Now
$7.87 Shipping Condition: New Location: Winona, United States ONLY FOR THE HOSSFELD NO. 1 BENDER.
Buy It Now
$8.78 Shipping Condition: New Location: Winona, United States HOSSFELD PART NUMBER 20098. ONLY FOR THE HOSSFELD NO. 2 BENDER. U-PIN WITH LUG.
Buy It Now
$8.78 Shipping Condition: New Location: Winona, United States HOSSFELD PART NUMBER 20085. ONLY FOR THE HOSSFELD NO. 2 BENDER. OFFSET FLAT HEAD PIN.
Buy It Now
$77.47 Shipping Condition: New Location: Winona, United States For the #2 bender only. 1-1/2" OD Round Tubing X 6" centerline radius.
Buy It Now
$8.78 Shipping Condition: New Location: Winona, United States HOSSFELD PART NUMBER 20084. ONLY FOR THE HOSSFELD NO. 2 BENDER. FLAT HEAD PIN.
Buy It Now
$7.87 Shipping Condition: New Location: Winona, United States ONLY FOR THE HOSSFELD NO. 1 BENDER.
Buy It Now
$9.45 Shipping Condition: Used Location: Avoca, United States Hossfeld 51B Outer Radius Block 108". Used has some wear.
Buy It Now
$14.30 Shipping Condition: Used Location: Norwood, United States Hossfeld No 2 Bender Die 13B8 Pipe Die 1 1/4" Radius Part Number: 20067 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD ... moreDIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1414d7335b0-0xf3-
Buy It Now
$26.18 Shipping Condition: New Location: Winona, United States For the #2 bender only. 1-1/4" OD Round Tubing X 4-1/2" centerline radius.
Buy It Now
$37.72 Shipping Condition: New Location: Winona, United States For the #2 bender only. 1-5/8" OD Round Tubing X 3" centerline radius.
Buy It Now
$9.45 Shipping Condition: Used Location: Avoca, United States Hossfeld 51B Outer Radius Block 84". Used has some wear.
Buy It Now
$4.49 Shipping Condition: New Location: Winona, United States For the #1 bender only. Complete factory printed instruction manual.
Buy It Now
$5.99 Shipping Condition: New Location: Winona, United States For the #2 bender only. New factory printed instruction manual.
Buy It Now
Free Shipping Condition: New Location: Suamico, United States Hand pipe bender. Industrial Hand Pipe Bender with PVC case• This compact pipe bender is suitable for round pipe ranging from 3/8” to 7/8” and square ... morepipe 3/4” 1” Easy and safe; bend a pipe by just pulling the handle• Round Pipe: 3/8" 1/2" 9/16" 5/8" 3/4" 7/8" Square Pipe: 3/4" 1" Pipe Thickness: 22GA? 18GA(0.8- 1.2mm) Max. Bending Angle:180°• This tool consist of a base. Spindle, bending arm, die roller, roller seat, screw and nut• Comes packed with a case for shipping only( case may be damaged during shipping as is. We accept instant PayPal payment or credit/debit card through PayPal. Payment in full is expected within 5 days after purchase or product availability will not be guaranteed after 5 days. All orders will be processed within 1-2 business days. Payment received on the weekends will be process on the next business day. Please contact us if you have any questions.font/font/font All e-check payments such as bank transfer or credit card will be processed once payment clears. For accurate and fast service. Please update your shipping address or choose the correct shipping address before submitting payment. All unpaid item dispute will be filed and sent to eBay after 7 days. Sales Tax will be apply to California resident FREE SHIPPING FOR DOMESTIC 48 STATES Orders usually leave our warehouse within 1-2 business days. These are estimated shipping times and not guarantees. We ship items out Monday to Friday. No items are shipped out on the weekends. On the off chance that we become aware of any delays or If there should be unexpected changes. We will notify you via e-mail. Domestic standard delivery transit time frame from 2-7 Business days once leave warehouse(UPS/ FEDEX/ USPS) Canada from 7-21 business days(UPS/ USPS) International Buyers Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these ad
Buy It Now
$19.87 Shipping Condition: New Location: Winona, United States ONLY FOR THE HOSSFELD NO. 2 BENDER.
Buy It Now
$17.58 Shipping Condition: New Location: Winona, United States For the #2 bender only. 3/4" OD Round Tubing X 2" centerline radius.
Buy It Now
$12.87 Shipping Condition: New Location: Winona, United States Genuine Hossfeld pins. ONLY FOR THE HOSSFELD NO. 2 BENDER.
Buy It Now
$86.55 Shipping Condition: New Location: Winona, United States Set includes form die, draw block, and a bolt on back block (bolts to the oscillating block on the #2 Hossfeld bender). For the #2 bender only. 2" OD ... moreRound Tubing X 6" centerline radius.
Buy It Now
$53.41 Shipping Condition: New Location: Winona, United States Set includes form die, draw block, and a bolt on back block (bolts to the oscillating block on the #2 Hossfeld bender). For the #2 bender only.
Buy It Now
$49.47 Shipping Condition: New Location: Winona, United States Set includes form die, draw block, and a bolt on back block (bolts to the oscillating block on the #2 Hossfeld bender). For the #2 bender only. 1-1/4" ... moreOD Round Tubing X 7" centerline radius.
Buy It Now
$6.45 Shipping Condition: New Location: Tucson, United States Published byDesert Hybrids Precision Engineered Products, these professional plans will allow you to build the Hydraulic Tubing Bender Conversion setup ... moreshown in the photos below. This includes over 50 pages of CAD drawings and High Resolution Full Color Photos.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Menifee, United States It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. This Manual Covers Models This Manual Includes This Manual ... moreHas 41 Printed Pages. I’ve read Parts of these Programming and Operations Manuals.
Buy It Now
$7.50 Shipping Condition: New Location: Tucson, United States Published byDesert Hybrids Precision Engineered Products, these professional plans will allow you to build the Hydraulic Tubing Bender Conversion setup ... moreshown in the photos below. This includes over 50 pages of CAD drawings and High Resolution Full Color Photos.
Buy It Now
$6.95 Shipping Condition: New Location: Winona, United States ONLY FOR THE HOSSFELD NO. 1 BENDER.
Buy It Now
$7.87 Shipping Condition: New Location: Winona, United States HOSSFELD PART NUMBER 20105. ONLY FOR THE HOSSFELD NO. 2 BENDER.
Buy It Now
$18.40 Shipping Condition: Used Location: Garwood, United States Nice hosfield bender flat plate part. One of the last parts I have left over from the 2 benders I have owned.
Buy It Now
Condition: Used Location: Graytown, United States A & L Industries or tooltimes2 has been on ebay for 20 plus years. We can help you with parts or whole machines, we can also help with your surplus inventory.. ... moreor if you are getting rid of surplus equipment.. today we have a Hossfeld No 2 Iron, Tubing Bender with stand pipe bender ironworker. In great shape, it does not have a tag. However, I believe this is a Hossfeld. We do not have any tooling with this one.. Thank you for your Business!! We can Ship! God Bless!
Buy It Now
$26.18 Shipping Condition: New Location: Winona, United States For the #2 bender only. 1-1/4" OD Round Tubing X 4" centerline radius.
Buy It Now
$34.87 Shipping Condition: New Location: Winona, United States For the #2 bender only. 1" OD Round Tubing X 6" centerline radius. Set includes form die, draw block, and back block.
Buy It Now
$13.85 Shipping Condition: New Location: Winona, United States ONLY FOR THE HOSSFELD NO. 1 BENDER. YOKE AND THUMB NUT INCLUDED.
Buy It Now
$27.14 Shipping Condition: New Location: Winona, United States For the #2 bender only. 1-1/8" OD Round Tubing X 4" centerline radius. Set includes form die, draw block, and back block.
Buy It Now
$32.18 Shipping Condition: New Location: Winona, United States For the #2 bender only. Set includes form die, draw block, and back block. 40 pipe X 3" centerline radius.
Buy It Now
$86.88 Shipping Condition: New Location: Winona, United States Set includes form die, draw block, and a bolt on back block (bolts to the oscillating block on the #2 Hossfeld bender). For the #2 bender only. 1-3/4" ... moreOD Round Tubing X 6" centerline radius.
Buy It Now
$38.87 Shipping Condition: New Location: Winona, United States For the #2 bender only. 1-1/4" OD Round Tubing X 5-1/2" centerline radius.
Buy It Now
$92.92 Shipping Condition: New Location: Winona, United States Set includes form die, draw block, and a bolt on back block (bolts to the oscillating block on the #2 Hossfeld bender). For the #2 bender only.
Buy It Now
$18.87 Shipping Condition: New Location: Winona, United States For the #2 bender only. 3/4" OD Round Tubing X 3" centerline radius. Set includes form die, draw block, and back block.
Buy It Now
$24.41 Shipping Condition: New Location: Winona, United States For the #2 bender only. 7/8" OD Round Tubing X 4" centerline radius. Set includes form die, draw block, and back block.
|
|
|
|
HOSSFELD NUMBER 2 BENDER YOKE
YOU ARE BIDDING ON A YOKE FOR A HOSSFELD NUMBER 2 BENDER. MADE BY THE HOSSFELD MANUFACTURING COMPANY. WINONA, MINNESOTA. IT IS IN EXCELLENT USED CONDITION. THE YOKE MAKES IT POSSIBLE TO MAKE 90 DEGREE BENDS IN FLAT, ROUND, OR SQUARE STOCK. THE THUMB NUT IS INCLUDED. SHIPPED USPS PRIORITY MAIL. POSTAL RATE VARIES WITH LOCATION OF BUYER. FOREIGN BUYERS PAY INTERNATIONAL POSTAGE RATES. PLEASE DON'T PAY UNTIL YOU RECEIVE AN INVOICE. ANY QUESTIONS CALL ME BEFORE BIDDING. 920 793-4010. WISCONSIN RESIDENTS PAY 5% SALES TAX.
|
|
|
VICKERS Hydraulic Power Pack Pump EX.:Hossfeld Bender
Vickers Hydraulic Power Pack Pump Model: PK1/2200 C12 Weight: 72 pounds for shipping Intergrated hydraulic valve on the pump both action. Hoses not included. Was used on a hydraulic pipe bender, Ex,HOSSFELD Bender. unit in very good condition, ready to work
|
|
|
HOSSFELD Iron Bender, Model #2 with assorted dies and shoes
Hossfeld Iron Bender Heavy Duty Model#2 Everything in the pictures is included! Comes with manuals& brochures Many dies and shoes. Including: 8B2- 8B- 13B8- 26B- 13B6- 13B4 Other dies/shoes are not numbered, so I measured them as best I could as such: 1 3/4" tubing die with 5" radius- 1 1/2" tubing die with 5"radius plus several other items like various round rollers Comes with a heavy duty stand. Look at my feedback and bid with confidence. Thank you for looking and good luck bidding! Due to the weight and cost of shipping I can not accept a return on this. So please look at the pictures closely and ask any questions that you may have before bidding.
|
|
|
1" OD Round Tube Die Set 3" and 5''-180 Hossfeld #2 Bender Die
1x3 and 1x5 tubing dies and one set of backing dies that can be used with either of the other two dies.
|
|
|
7/8" OD Round Tube Die Set 4 1/4''-180 Hossfeld #2 Bender Die
God set of dies for hossfeld bender
|
|
|
#2 HOSSFELD Bender (Bend Flat,Round+Square Rod Metal)
Old Heavy Duty HOSSFELD Bender Bend Flat Round Square Rod Metal Satisfaction guaranteed or your money back This auction is for one lot of: Old Heavy Duty HOSSFELD Bender for Bending Flat Round Square Rod Metal. as seen in the photo/s. This sale is for exactly what is shown in the photo/s. Do not assume anything else comes with it. This is not like the new ones for sheet metal. This is a classic heavy duty bender used by blacksmiths and welders. Includes the accessories shown. CONDITION: Used. With some wear consistent with its age.Bolted to a metal plate.I can remove the plate if you don't want it for a shipping cost savings. Peeling paint and some surface rust. Sorry about the pics.I forgot I had it set to black+white.it has a blue paint. USA SHIPPING: This item/lot‘s actual weight is approximately 110 pounds. My shipping charge will ... morebe as if 130(120lbs without the plate. Lbs is the packaged weight for this auction item. I will use Priority Mail if item is small and packaged weight is listed as 2 lbs. or less + UPS Ground for heavier. Bigger items. For my TOTAL SHIPPING/HANDLING ESTIMATE to your location please see eBay’s“SHIPPING COSTS” near the top of this page. For FOREIGN SHIPPING rates check at: http:ircalc.usps.gov/ Take the weight I list for the packaged shipment. Use my Zip(14411) as the"ship from" And add $5 S&H to your choice of service. Most other delivery services are possible. BUT it will require an additional $5 PIA fee. No COD’s. No charge for LOCAL PICK-UP. Combining purchases is welcome and will often save you quite a bit on shipping costs. Click on the link“View seller's other items” at the top of this page. RETURNS: Satisfaction guaranteed or your money back NO“restocking fee” NOT SOLD"AS-IS" I have attempted to honestly represent this item to the best of my knowledge. And photograph it as clearly as possible. But, because I do make mistakes(Yes, I am human! buyer may return within one wee
|
|
|
Hossfeld No. 2 Bender, hydraulic system and tooling
Hossfeld No. 2 Bender SN 39663. C/w hydraulic system. Tooling as follows. 13B6-1-3/4" dia tube, 13B6- 2" dia. tube, 13B6- 2-1/4"dia. tube, 13B8- 1-7/8"dia. tube, 13B4- 2-1/4" dia. tube. round dies. 7/8" tube x 2" radius rd die x 1" pin hole. 1" tube x 2" rad x 1" pin hole. angle iron dies. 51B5, 31B5,51B6, 31B6, 31B9, 51B9, 31B12, 51B12, 31B24, 51B24, 31B30, 51B30, 31B36, 51B36, 31B15, 51B15, 31B7, 51B7, 31B18, 51B18. 2) sq. blocks 2-1/4" x 2-1/4" x 4-1/2" with 7/8" hole.7B, 8B& 8B2 vee x 4-1/2" high x 1" hole.u bolt yoke attachment.round centre dies. 2-1/2" 2" dia. 2" wde vee on die x 3-1/4" long x 3/4" hole, 3/4" hole x 4-1/2" long. 2) 26B flat bar die 2 hole mount.1 round die 7/8" tubex 1-1/4" rad. x 1" ... morehole, 1 round die 7/8" tube 1-1/2" rad x 1" hole, 2 yokes with points,2 boxes with pins and misc.inner radius blocks 30-36, 6-9, 5-7,18-24, 15-12.triple high tube bender for 1/2" 1/4" 7/8" 2 high.1-1/4" 1" tube.no 51.B2.12b.flat bar tool 6-1/4" x 2-1/2" thick.44B tube die on machine
|
|
|
Hossfeld No. 1 Universal Iron Bender DiAcro Blacksmith Motorcycle Chopper Race
Up for your consideration is a Hossfeld No. 1 Universal Iron Bender with accessories and cabinet/stand. It is in good condition. But has scratches, paint spatter, and minor surface rust in places. There are manuals available for download on Hossfeld site. There are also excellent You Tube videos on the same site. It comes as is, with everything that is pictured. Please ask any questions you might have. Make sure to look at the other fabrication tools that I currently have listed. I prefer this to be picked up and I will load on your truck for free. If you want to ship please make your own arrangements. But if you need help in this area, just ask. If it is going to be shipped I charge $40.00 for palletizing. If you have any questions you can reach me at 618-559-6011 and ask for Andrew or leave a message and I will get right back to you.
|
|
|
Whitney Jensen Bar Folder Bender ( Pexto, Roper, Hossfeld, Diacro)
Here is what believe is a small bar stock bender by Whitney Jensen. The only identifying marks are the tag and stamped numbers as shown in the pictures. Sorry. I don't know anything else about it. Posted with
|
|
|
Vintage 1947 Hossfeld Bender Manual and Parts List
Vintage 1947 Hossfeld Bender Manual and Parts List Shop worn but complete. 29 pages Shipping will be $3.00 Will combine shipping. Be sure and check my feedback. Thanks. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13f2c09679a-0xfc-
|
|
|
HOSSFELD UNIVERSAL HYDRAULIC TUBE & PIPE BENDER - DISASSEMBLED
aims HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Hossfeld Manufacturing Co. This is a Disassembled Universal Hydraulic Tube& Pipe Bender. Hydraulic unit powers up fine. Everything appears to be there. Unfortunately. Due to an influx of new inventory, we do not have time to sit here and piece the bender back together. Great opportunity for a repair project for someone with the time and knowledge. See if this can work for you. Happy Bidding! Model# 2 Serial# B-42779 Specifications: Bends Following Materials: Round Tube. Square Tube, Schedule 40 Pipe, Rectangle Tube, Angle Iron, Flat, Bar, Handrail, Scrolls. Maximum Round Capacity: 2" OD. Maximum Square Capacity: 1-1/2" Maximum Schedule ... more40 Capacity: 2" Pump Motor: 1 Horsepower. 115/208-230 Volt, 1,725 rpm, 12.8/6.4 Amp, 60 Hz, Single Phase. Electrical: 115 Volt. Single Phase. Overall Dimensions: 64" x 43" x 45" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED Reliable Tool Inc. c 2011 |
|
|
|
MACHINE SHOP HOSSFELD UNIVERSAL IRON BENDER BROCHURE & PRICE LIST
I HAVE MANY MANUAL. BROCHURES FROM THE 60S AND 70S FROM AN OLD MACHINE SHOP, PLEASE SEE THEM ALL. YES, I CAN COMPINE SHIPPING AS ADDITIONAL ITEMS SAVES YOU ON SHIPPING. nice condition. 1960S, 12 PAGES
|
|
|
Hossfeld No 2 Universal Tube Pipe Bar Iron Bender w/ Dies
Paypal. Visa, Mastercard, American Express. We would like this transaction to be a great one for you so please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. Hossfeld No 2 Universal Tube Pipe Bar ... moreIron Bender w/ Dies DESCRIPTION: ~ Up for bid is a good working Hossfeld No 2 univsersal tube pipe bar bender with dies. The freight shipping weight is 275lbs on a secured pallet. If picking up locally. We can load your vehicle with the forklifts. We palletize and/or load the freight trucks for free. Freight Shipping Calculator Fill out the fields below and press the orange button to get instant rates. Enter Your U.S. Zip Select Location Type Business with Dock or Forklift Business without Dock or Forklift Construction Site Convention Center or Tradeshow Residence Terminal The quote is a"rough estimate" for freight shipping. It takes a moment for the calculator to load a quote. The carrier that is presented in the quote may not necessarily be the one used at the time of shipment. gsrx_vers_522(GS 6.6.2(522)
|
|
|
Hossfeld Size 2 Universal Iron Bender tubing bender
I bought this bender years back and never really used it. I paid triple what the reserve is set at. Comes with everything in the pictures. 95% of the dies have never been used. I only used the tube bending die a few times. I believe it is 1/2 inch. Great bender, I just never used it. Buyer to pay shipping freight plus packaging fees to be determined by your location. I will only charge what the actual freight is or you can get your own freight. Feel free to contact me at for questions. Ignore the shipping calculator for fees. Fees will vary due to your location and shipping method. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13fd96073b2-0xf9-
|
|
|
Vintage 1957 Hossfeld Bender Manual and Parts List + Letter to BOAC JFK Airline
Vintage 1957 Hossfeld Bender Manual and Parts List(blue cover booklet) + extra Hossfeld brochure(yellow) and bonus: Letter to Engineering Department of British Overseas Airways Corp BOAC JFK Airline from Hossfeld Manufacturing Co December 1. 1966. Booklet is shopwork but still in usable condition and interior is quite clean. Yellow brochure in very good condition. See photo for condition of letter. HAPPY BIDDING!
|
|
|
HOSSFELD #2 BENDER With hydraulic unit
Hossfeld#2 Hydraulic bender here is a nice hossfeld with the hydraulic unit we will get a video of it for you. if you need a nice one this one is fairly nice. Thank you for your Business! Can ship to your location! God Bless!
|
|
|
Hossfeld Bender On Pedestal
This is a Hossfeld#2 bender with pedestal. Comes with a 7/8" tubing die set Flat stock dies Bend indicator and stop. Due to size and weight local pickup only. If you want to arrange a pickup. I will work with you. Posted with
|
|
|
Hossfeld # 2 center pin and frame pins
All in working order center pin 1" and the other 2 are 3/4"
|
|
|
Hossfeld bender #2 180deg dies 2 3/4 radius 7/8 dia
good working condition# 2 die set.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-140e5473706-0xfb-
|
|
|
Hossfeld #2 bender 3" radius 1" dia tube die
3" radius 1" dia 180 deg. tube die set not sure if its center line of radius or not. 2 bender dies
|
|
|
HOSSFELD BENDER No.1 & Cabinet with attachments
Hossfeld bender with cabinets and lots of attachments. Includes Hossfeld VHS for the metal forming process. Very good condition still. Barely used. Local pick up only or buyer can arrange shipping. Around 500-600lbs. I can help with the loading.
|
|
|
HOSSFELD No 2 Bender 2B Half Round Roller & Shoe Assembly 20001
Hossfeld No 2 Bender Die 2B Half-Round Roller& Shoe Assembly Part Number: 20001 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1414d73363a-0xfc-
|
|
|
HOSSFELD No 2 Bender 52B Inner Radius Blocks 18" / 24" 21049 - Bend Angle Iron
Hossfeld No 2 Bender Die 52B Inner Radius Blocks Angle Iron/ Leg-Out 18" 24" Part Number: 21049 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271
|
|
|
HOSSFELD No 2 Bender 51B2 Edgebend Die 20954 - Bend Tube Radius
Hossfeld No 2 Bender Die 51B2 Edgebend Die Part Number: 20954 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271
|
|
|
HOSSFELD No 2 Bender 13B8 Pipe Die 1 1/4" 20069 - Bend Tube Radius
Hossfeld No 2 Bender Die 13B8 Pipe Die 1 1/4" Radius Part Number: 20067 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1414d7335b0-0xf3-
|
|
|
HOSSFELD No 2 Bender 13B6 Pipe Die 1 1/2" 20067 - Bend Tube Radius
Hossfeld No 2 Bender Die 13B6 Pipe Die 1 1/2" Radius Part Number: 20067 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271
|
|
|
HOSSFELD No 2 Bender 13B4 Pipe Die 2" 20065 - Bend Tube Radius
Hossfeld No 2 Bender Die 13B4 Pipe Die 2" Radius Part Number: 20065 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271
|
|
|
HOSSFELD No 2 Bender Angle Iron Die - 50B Master Die 20987 -Leg Out-Bend Radius
Hossfeld Bender Die 50B Angle Iron Die For Hossfeld No 2 Bender Leg-Out/ Master Die Part Number: 20987 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1414d7335bf-0xfd-
|
|
|
HOSSFELD No 2 Bender Angle Iron Die - 51B 5" 20993 Leg Out - Bend Outer Radius
Hossfeld No 2 Bender Die Angle Iron Die Leg-Out/ Outer Radius Inner Radius: 5" Part Number: 20993 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271
|
|
|
HOSSFELD No 2 Bender 16B Eye Bolt Bending Dog & 24B Thumb Nut 20078 20705
Hossfeld No 2 Bender Die 16B Eye Bolt Bending Dog& 24B Thumb Nut Part Number: 20078& 20705 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271
|
|
|
HOSSFELD No 2 Bender 8B 2" Cam Die 20046
Hossfeld No 2 Bender Die 8B 2" Cam Die Part Number: 20046 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271
|
|
|
HOSSFELD No 2 Bender 8B2 2 1/4" Cam Die 20047
Hossfeld No 2 Bender Die 8B2 2 1/4" Cam Die Part Number: 20047 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271
|
|
|
HOSSFELD No 2 Bender 7B 1 3/4" Cam Die 20045
Hossfeld No 2 Bender Die 7B 1 3/4" Cam Die Part Number: 20045 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271
|
|
|
HOSSFELD No 2 Bender 26B Sharp Square Bending Block 20717
Hossfeld No 2 Bender Die 26B Sharp Square Bending Block Part Number: 20717 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271
|
|
|
HOSSFELD No 2 Bender 23B Yoke and 24B Thumb Nut 20697 / 20705
Hossfeld No 2 Bender Die Yoke and Thumb Nut 23B& 24B Part Number: 20697/ 20705 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271
|
|
|
HOSSFELD No 2 Bender 4B Gripper Blade Assembly 20012 Flat Eye
Hossfeld No 2 Bender Die 4B Gripper Blade Assembly Flat Eye Part Number: 20012 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271
|
|
|
Hossfeld degree ring and other parts
the degree ring is not perfectly round but it works fine other than that there in good working order dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14154b71c12-0xf4-
|
|
|
HOSSFELD No 2 Bender Angle Iron Die - 31B 18" 20814 - Leg in- Bend Inner Radius
Hossfeld No 2 Bender Die 31B Angle Iron Die Leg-In/ Inner Radius Inner Radius: 18" Part Number: 20814 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14155917ee8-0xf5-
|
|
|
BULLDOZER DIE #60 & CENTER PIN FOR HOSSFELD #1 BENDER
60 BULLDOZER DIE& CENTER PIN FOR HOSSFELD#1 BENDER BULLDOZER DIE#60& CENTER PIN FOR HOSSFELD#1 BENDER. USED IN GOOD CONDITION. FOR BENDING CLOSED SQUARE EYES IN FLAT& ROUND STOCK. CAPACITY: FLAT STOCK UP TO 3/16" X 4 1/2" ROUND WIRE. UP TO 1/4" FOR MORE INFORMATION SEE: CURRENT PRICE FROM HOSSFELD AS OF 8-19-13: $175. SEE OTHER AUCTIONS FOR A#26 SHARP SQUARE BENDING DIE FOR#1 BENDER. Satisfaction guaranteed. No fee will be charged for packing or handling. Boxes and packing materials are recycled and are provided at no charge. Shipping charges will be actual cost. Including passing the USPS online discount on to the buyer, when applicable. Please do not downgrade shipping charge feedback to us because of USPS or UPS charges, as we have no control over them, and are as low as possible. USPS shipping is a bargain(especially ... moreFirst Class packages) maybe that's part of the reason they are losing billions of dollars a year. If multiple purchases are made. Please wait to receive an invoice so that the shipping charge can be adjusted for one package(when possible) Shipping weight: 4 lbs. Buyer. Please leave positive 5-star feedback if you are satisfied with the results of this auction, in spite of their stated definition, Ebay aparently considers less than 5-star feedback to be sub-par) I will then reciprocate. Due to the increasing number of people who do not leave feedback, I no longer post first. If you have any questions. Please ask them before bidding. Thank you for looking at and considering this listing.
|
|
|
HOSSFELD #2 TUBING BENDER DRAG RACE SPRINT CAR DRAGSTER
This auction is for a MADE IN THE USA used# 2 Hossfeld tubing bender. It includes a set of dies for 1.25 dia. tubing. Bending@ 6" radius. Original set up booklet included.Will supply pics of dies and pins Monday nite. This item is for pick up only in Muncie Indiana. If you want it shipped we will need to discuss that, it is bulky and heavy. This is a vintage used item. That said it is sold as is. Place your bid based on description/photos provided. Along with posed answers to questions asked by you or others.
|
|
|
SHARP SQUARE BENDING DIE #26 FOR HOSSFELD #1 BENDER
SHARP SQUARE BENDING BLOCK#26 FOR HOSSFELD#1 BENDER SHARP SQUARE BENDING BLOCK#26 FOR HOSSFELD#1 BENDER. USED IN GOOD CONDITION. FOR FORMING SHARP CORNERED BENDS IN FLAT STOCK. CAPACITY UP TO 1/4" X 4 1/2" FOR MORE INFORMATION GO TO: SEE OTHER AUCTIONS FOR A BULLDOZER DIE#60& CENTER PIN FOR HOSSFELD#1 BENDER. CURRENT NEW COST QUOTED 8-19-13 FROM HOSSFELD BY EMAIL: $70. Satisfaction guaranteed. No fee will be charged for packing or handling. Boxes and packing materials are recycled and are provided at no charge. Shipping charges will be actual cost. Including passing the USPS online discount on to the buyer, when applicable. Please do not downgrade shipping charge feedback to us because of USPS or UPS charges, as we have no control over them, and are as low as possible. USPS shipping is a bargain(especially First Class packages) ... moremaybe that's part of the reason they are losing billions of dollars a year. If multiple purchases are made. Please wait to receive an invoice so that the shipping charge can be adjusted for one package(when possible) Shipping weight: 5 lbs. Buyer. Please leave positive 5-star feedback if you are satisfied with the results of this auction, less than 5-star feedback is considered sub-par by Ebay) I will then reciprocate. Due to the increasing number of people who do not leave feedback, I no longer post first. If you have any questions. Please ask them before bidding. Thank you for looking at and considering this listing.
|
|
|
Hossfeld Hossfield No.1 bender machine on cabinet stand with dies in picture
Bidders please read the ad. Welcome to another listing by Best Bay Machinery Sales. We specialize in offering high quality new and used metalworking equipment for machining and fabricating at affordable prices. This listing is for the following. You Are Bidding On A Pre-Owned Hossfeld No.1 bender with dies and factory stand and a Roper Whitney Model 3 shear mounted on cabinet get it before someone else does. copies of manual If it is not in photos it isn't included. Thanks GET A DEAL HERE! Mfg info: for comparison info only Thanks INFO FOR REFERENCE ONLY at 250# shipped Skidded and Loaded for free THIS SAVES YOU EVEN MORE $$$$$. 50-150.00 savings Questions email or call BOB 773-392-5055 Terms of Sale Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes ... moreCanada. Buyers pay for shipping· Flat rate shipping is to lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. Most items have a warranty check ad for policy in none is listed then the following applies. All items are sold"AS- IS. Where- IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We at Best Bay Machinery Sales and/or the Seller make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. I always return feedback so leave some good comments so I can do the same for you. Please see my other auction. You never know what bargains you will find! Thanks much and happy bidding Shipping Shipping paid by buyer. USA ONLY. I combine s
|
|
|
VINTAGE BLACK FOREST CARVED WOOD CUCKOO CLOCK GERMAN G. HOSSFELD VILLINGEN NoRes
HERE FOR YOUR CONSIDERATION AT A"NO RESERVE LOW STARTING BID" AUCTION FROM AN ESTATE SALE IS A VINTAGE GERMAN BLACK FOREST CARVED WOOD CUCKOO CLOCK SPORTING A BIRD WITH AT THE TOP ACCENTED WITH CARVED LEAF WORK DOWN THE SIDES AND AT THE BOTTOM. CLOCK IS WEIGHT CHAIN DRIVEN BY 2 METAL PINE CONES SUSPENDED AT THE BOTTOM ALONG WITH A SWINGING PENDULUM. ON THE CLOCK MOVEMENT IT READS"G. HOSSFELD VILLINGEN MADE IN GERMANY" CLOCK IS IN GOOD CONDITION AND GREAT WORKING ORDER KEEPING FINE TIME. PLUS MOVEMENT HAS BEEN RECENTLY CLEANED& OILED. THE CUCKOO BIRD SOUNDS ON THE 1/2 HOUR PLUS STRIKES A GONG AND ON THE HOUR THE CUCKOO BIRD SOUNDS DENOTING THE TIME PLUS STRIKES A GONG FOR THE HOUR COUNT. CLOCK MEASURES 19" LONG FROM THE TOP OF THE BIRD TO THE BOTTOM OF THE PENDULUM by 11 ½" WIDE by 6" DEEP FROM FRONT ... moreTO BACK. IS MADE WITH WONDERFUL DETAIL AND GREAT CRAFTSMANSHIP. WOULD MAKE A FANTASTIC ADDITION TO ANY COLLECTION OR GIFT FOR THAT SPECIAL SOMEONE! ~ DELIVERY CONFIRMATION& INSURANCE ARE INCLUDED IN U.S.A. SHIPPING~. WILL COMBINE SHIPPING WHEN POSSIBLE. PLEASE ASK QUESTIONS PRIOR TO BIDDING. ALL SALES ARE FINAL. PAYMENT IN FULL IS DUE WITHIN 5 DAYS AT CLOSE OF AUCTION. I ACCEPT PAY PAL. WE PACKAGE WITH GREAT CARE. IF RETURN ARRANGEMENTS ARE OK'D. BUYER IS RESPONSIBLE FOR S/H/I BOTH WAYS. FOR MULTIPLE PURCHASES PLEASE EMAIL TO LET ME KNOW& WAIT FOR THE INVOICE FOR A COMBINED SHIPPING DISCOUNT. WE SHIP WORLD WIDE& WELCOME INTERNATIONAL BUYERS, WHO WILL BE RESPONSIBLE FOR PAYING ALL CUSTOMS, DUTY, AND BROKERAGE FEES INCURRED FOR THIS ITEM. INTERNATIONAL SHIPPING CHARGES WILL BE CALCULATED AT TIME OF SALE OR EMAIL IN ADVANCE. PLUS THERE IS A SHIPPING CALCULATOR ON MOST ITEMS. TAKE THE TIME& VISIT MY eBAY STORE@ COLLECTIBLES FROM ME TO YOU Be sure to add me to your favorites list! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GERMAN CUCKOO CLOCK FOR PARTS/RESTORATION-HOSSFELD VILLINGEN
THIS SALE IS FOR A VINTAGE GERMAN CUCKOO CLOCK. IT IS APPROXIMATELY 10 BY 8 BY 6 INCHES DEEP. THE CLOCK ITSELF IS MARKED"HOSSFELD. VILLINGEN" ON THE BACK AND"WEST GERMANY" ON THE FRONT. IT'S MISSING THE WEIGHTS, BACK DOOR, ROOF DECOR, THE CLOCK FACE AND HANDS ARE BROKEN AND POSSIBLY MORE. IT'S BEING SOLD FOR PARTS OR RESTORATION. My Selling Policies: All items I sell come from the secondary market(auctions. Flea markets, yard sales, thrift stores) Occasionally I'll find something in new condition, but most antique or collectable items will have normal expected wear for their age. My home is smoke-free and I try not to get smokey items by using the"sniff test" We have a couple of small dogs in case you're highly allergic. I re-use and recycle so expect some creative packaging- I use egg cartons, ... morebrown paper bags, crumpled newspaper, old boxes and so on. I will ship worldwide by request on items where the shipping is reasonable, but keep in mind the post office has size and weight restrictions on what can be mailed to various countries and some things can't be mailed at all. My husband is legally blind and selling onlne allows me to work at home and is something he can help with. Please be a little understanding when doing feedback and keep in mind that we're just a couple of older people trying to supplement social security/disability- not a huge warehouse with fifty employees. I try to always mail within 24 hours on business days and I will work with you if you are unhappy with your purchase any way I can. I refund up to 14 days after receipt. Thank you for visiting my store and God Bless!
|
|
|
Hossfeld Bender No. 1, tube bender, pipe, fabrication
Very clean. Lightly used Hossfeld Bender model No.1. No dies with this unit, does include handle. Hossfeld sells many different dies for bending tubing, pipe, flat stock, angle iron, I'm selling this because I bought a bigger hydraulic version. If you live close feel free to come and look at it. Local pick up only, can help organize shipping at seller's expense. Also can help accommodate delivery to surrounding states. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1432ca32153-0xfb-
|
|
|
Tube pipe tweaker bender hossfeld
Heavy duty tweaker bar used to correct under or over bent tubes. Will accept up to 1.500" O.D. tubing. Heavy duty 3' fixed steel handle. Note: free shipping to lower 48 states only. Please inquire for all others before purchasing.
|
|
|
HOSSFELD No 2 Bender Angle Iron Die - 51B 40 - Outer Radius
This is a HOSSFELD No 2 Bender Angle Iron Die- 51B 40- Outer Radius If any questions feel free to email Thanks Happy Bidding
|
|
|
HOSSFELD No 2 Bender Inner Radius Block 30" / 36" - Bend Angle Iron
HOSSFELD No 2 Bender Inner Radius Block 30" 36" Bend Angle Iron. There are no cracks. If any questions feel free to email Thanks Happy Bidding
|
|
|
Hossfeld Bulldozer die 60B
This is a used Hossfeld Bulldozer Die 60B if any question feel free to email Thanks You Happy Bidding
|
|
|
HOSSFELD BENDER & LOTS OF DIES
Hossfeld Bender with a lot of Dies included. In very good condition. Buyer will be responsible for shipping charges or may make arrangements to pick up.
|
|
|
Hossfeld Scroll Forming tool No. 6 1/2, No 8 flat stock iron work sheetmetal
Hossfeld scroll forming attachments for Hossfeld Universal Bender. A# 6 1/2 and a#8 diameter for flat stock. No refunds or exchanges.
|
|
|
Hossfeld # 2 bender, No reserve auction!!
Up for auction is a used Hossfeld# 2 bender. Basic machine including main frame. Swing arm, extension arm and die# 12B. Includes NO additional tooling. Can break down easily to make more compact to ship, but will need to ship in several packages. Actual shipping cost to be determined at end of auction or local pick up. Get a Hossfeld tool at this no reserve auction! Posted with
|
|
|
Hossfeld #2 Bender, hydraulic pump attachment & custom steel rolling table
This is a used Hossfeld#2 Iron Bender(Serial#46166) with the Hydraulic Bender Attachment(Serial#918) mounted on a custom easy rolling steel-wheeled table. The table's 42" cylinder is actuated with the hydraulic pump. The table has not been repainted nor does it need to be. it is bright red- mainly because it was wet in the picture. I do not know how to use the bender. But we did turn it on and verify the cylinder and pump worked. I understand there are numerous dyes that you can purchase. You can have any parts i have or find in the near future. i purchased a building that was formerly an iron works shop for large estate type gates and this was one of the several pieces of equipment that i purchased. The table can be fixed mounted to the floor. As heavy duty as this table is. It is easily rolled across a flat surface floor. I will ... morebe happy to help load the items with my forklift whether you come personally or hire a delivery service. Shipping is not free. My time helping to load is free. You will need to contact your own delivery service or make the trip to North Little Rock. Arkansas to pick it up. I dont have a scale to weigh the bender, table and components, but i'm taking a wild guess at 500# I will add more pictures tomorrow evening.
|
|
|
Hossfeld #2 hydraulic pipe bender with dies and custom stop
For sale is a Hossfeld#2 hydraulic bender on an aluminum stand with wheels It has a custom adjustable stop for repeatability(it is piped in to the hydraulic unit which stops it automatically) it is a great feature for repeat parts. It comes with various die sets and a cabinet I will not ship this. However we can load on your truck free of charge with a forktruck
|
|
|
Hossfeld Bender Molded Handrail Cap Forming Dies +Backing and Draw Blocks
Auction is for 3 molded handrail cap forming dies and the backing and draw block for a Hossfeld bender. The dies are double sided and have the numbers 32.34,82,84,56,58 on each side.
|
|
|
Hossfeld # 2 Bender complete with 16 tubing Dies and lots of tooling
Used Hossfeld Bender with tooling and dies Includes Hydraulic attachment and all accessories that goes with it. And misc blocks and all standard tooling that comes with it from the factory Tubing dies include: 1/2 od x 3 Rad 1 1/4 x 6 Rad 1 3/4 x 6 Rad. 3/4 od x 1 7/8 Rad 1 3/8 x 4 Rad 2 Od x 6 Rad. 7/8 OD x 3 Rad 1 3/8 x 7 Rad 1 pipe x 5 Rad. 1 Od x 6 Rad 1 1/2 x 4 Rad 1 Square x 6 Rad. 1 Od x 2 1/4 Rad 1 1/2 x 6 Rad 1 1/4 Od x 3 5/8 Rad 1 3/4 x 3 1/2 Rad.
|
|
|
Hossfeld Model 2, Iron Bender, Power Drive, Instructions and Parts Manual 1967
We Have Thousands Of Machine Manuals. Instruction Manuals. Machinery Maintenance Manuals. Parts list. Service Manuals. Machinery Brochures And Schematics For Sale. We Are Proud To Provide Service To The Metalworking. Chip Making and Fabricating Machine Tool Manual Needs. We Take Great Pride In Getting You The Correct Manual For Your Machine. Let Us know Your Serial Number. And Model Number. We Guarantee That We Will Get You a Correct Manual or Your Money Back! Each Manual Is Comb Bound For Easy Reading On A Flat Surface Such As a Table or Workbench. We Have Collected These Manuals Over Many Years And Continue To Look For More Every Day. Our Customers Have Been Pleased With Our Manuals. Schematics, Parts List, Service Manuals, Maintenance Manuals, Instructions Manuals And Brochures. They Are Filled With Invaluable Information, Sometimes Not ... moreEven Available Direct From The Manufacturer. We Are Often The Last Resort. We Take Pride In This Fact. We Are Here To Fulfill Your Industrial Machinery Manual Needs Today. Email Us Today! Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false M
|
|
|
Vintage HOSSFELD MANUFACTURING Bender Manual-1947- Excellent Condition
This listing is for a Vintage HOSSFELD MANUFACTURING CO. Instruction Manual and Parts List for size No.2 Hossfeld Universal Pipe. Bar and Angle Iron Bender"Wrenchless Type" This manual was copyrighted in 1947. There are no loose pages or marks on the pages, but they are slightly yellowed. This manual is in EXCELLENT condition to be 67 years old. I only ship within the United States. If you have any questions. Please message me. Thanks for looking and HAPPY BIDDING!
|
|
|
HOSSFELD No. 2 PIPE TUBING BENDER HYDRAULIC UNIT PUMP TUBE DIES LOTS of TOOLING
Hossfeld No. 2 Bender Excellent Condition! 90% of Tooling was NEVER used! This will be palletized and shipped freight if needed. Let me know your zip code if you want me to quote you a price. probably around $500) This is a great Hossfeld No. 2 Bender with many of the dies and pieces of tooling that was available at the time we purchased this. Includes the hydraulic pump. Piston and"L" frame for 180 degree bends. General purpose and cam dies. Blocks and pins for bending pipe, eye bolts, flats, and more. Also has the inbend and outbend angle iron dies. Edgebend and bulldozer die. There are also some custom dies that we had made for certain jobs. It is mounted to the original Hossfeld table with storage shelves and there is also an additional storage cabinet on wheels as seen in the photos. The original manual and paper work is included. ... moreMost of the dies and tooling have never been used. We bought this and used this primarily for manufacturing pipe railings while they were popular in the late 1980's early 1990's. After the building codes changed and the popularity of pipe railings died down. This machine was only used on rare occasions. Any way my shop is closing down now and I have been selling off my machinery and tools. So this is next to go. And hopefully to someone that can get great use out of it. As you can see in the photos. There is ALOT of tooling. This is the most that has ever been. And probably ever will be on ebay. Don't miss out! Great Price for this huge setup! This can be picked up in Hauppauge NY 11788, or I can ship this out by truck if needed. It will be on a pallet. Banded and shrink wrapped professionally. If you have any questions. You can reach me at Five One Six 582 Eight Seven Three Three. CHECK OUT THE PHOTOS! LOOK HOW GREAT THIS LOOKS! GREAT PRICE! GOOD LUCK AND HAPPY SHOPPING! READ MY FEEDBACK AND SEE HOW HAPPY MY CUSTOMERS ARE WITH MY GREAT PRODUCTS AND QUICK SERVICE WITH EXCELLENT PACKING. Please check out my other items for sale to see if there is anything else
|
|
|
HOSSFELD TYPE BENDER WITH HYDRAULICS
This bender will require some welding and drilling in stainless steel it has been made with the same hole layout as a Hossefeld type bender will bend up to 2" with the purchase of the dies. All hossfeld dies will fit. And can be purchased on Ebay sites. The hydraulic pump has been tested and works with the cylinder provided. Again some fabrication skills will be needed to finnish this project, but you will be getting a hossfeld type bender much under value. Make sure by the pictures you grasp what needs to be done to finnish this project. If this is to much of a project for you then winning bidder will have the option of me to finnish it for an additional $250.00, just message me as to you wanting this option.
|
|
|
HOSSFELD BENDER SIZE #1 LOTS OF TOOLING CABINET STAND AND MANUALS
Hi! This Hossfeld bender is in exceptionally nice condition. It was used in a school for a short time in an auto body repair class until they decided to no longer offer this class. It was therefore sold in an auction as surplus. It has seen little use. Included with the machine is an original Hossfeld cabinet stand. New instruction manual, parts catalog, and price list. The tooling includes the general purpose set, also tools to bend pipe, rod, bar and angle iron as well as tools to form scrolls. Some sets may have pieces missing and not be complete. You will have to look at the pictures to see exactly what it included. You will receive everything in the pictures, no more and no less. All parts for this bender are available in the catalog, but they are expensive. This item will have to be picked up locally as it is too big and heavy for me ... moreto ship. I am located approx. 60 miles east of Evansville, IN. and 70 miles west of Louisville, KY. just north of Interstate 64 in southern Indiana. Thanks for your interest.
|
|
|
8972 Hossfeld No. 2 Universal Bender with Hydraulic Unit
Hossfeld No. 2 Universal Bender with Hydraulic Unit Serial# NA Asset# 8972 Specifications: OD Tube 1-1/4" through 2" OD Pipe 1" through 2" ID Flat 1/2" Round or Square Bar 3/4" through 1-1/4" dia Square Tube 1" through 1-1/2" Rectangular Tube All sizes Angle Iron 1/8"x1-1/2"x1-1/2" 3/16"x2"x2" Handrail with assembled channel Preliminary Specifications- Subject to Verification Purchasing Information: There is a chance that this item may sell locally at our facility before we take it down from Ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check and PayPal 30 Day Return Privilege Policy: Returns are accepted ... moreon this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizing separately and it is not included with the sale price. We'll quote per customer requirements. Customer shipping method& machine design. We are a stocking dealer of new and used machine tools located in West Michigan and are members of the MDNA. We have over 1.000 different manual and CNC machines in stock for both fabrication and metal cutting applications. We are always looking to buy machinery– 1 piece or entire plants Please feel free to call or email us any questions at: Phone: 616-868-1111 Email: sales@vanderzielmachinery.com Vander Ziel Machinery Sales. Inc. 6
|
|
|
HOSSFELD 1" PIPE 180 FORM - TWO 1" PIPE FEED ALONG DIES with BLOCKS
HOSSFELD- SEVEN DIE PARTS for 1" PIPE- 1" PIPE 180 DEGREE 1" X 6" FORMING DIE(Part#23915) 1" X 11-3/4" PIPE FEED ALONG DIE(Part#24077) 1" X 13" PIPE FEED ALONG DIE(Part#34168) 1" BACK BLOCK and 1" DRAW BLOCK. Also includes 1" BACK BLOCK WITH 1" Footing Pin as well as a 1" BACK BLOCK WITH 1/2" Footing Pin. Please see photos of the items. There are also some digital images from the HOSSFELD website to show applications of these items. The list price for these seven items is rather expensive. I PAID OVER FIVE HUNDRED DOLLARS FOR THEM! Instead of spending a lot to buy brand new items. Save a lot of money and buy these lightly used items. These are all great heavy duty tools. This group of 7 items weighs 45 pounds. So it will cost $49 to be shipped by Economic Ground Freight ... moreService in the U.S.A. Please check out my other listings for different HOSSFELD items.
|
|
|
HOSSFELD 1-1/4" PIPE DIES - 180 FORM plus 30" & 36" FEED ALONG DIES
HOSSFELD- THREE DIE PARTS for 1-1/4" PIPE- 180 DEGREE PIPE 1-1/4" X 7" FORMING DIE(Part#34596) 1-1/4" X 36" FEED ALONG DIE(Part#34905) 1-1/4" X 30" FEED ALONG DIE(Part#34869) Please see photo of the items. There are also some digital images from the HOSSFELD website to show various applications of these items. The list price for these items is rather expensive. I PAID OVER SIX HUNDRED DOLLARS FOR THEM! Instead of spending a lot to buy brand new items. Save a lot of money and buy these lightly used items. These are all great heavy duty tools. This group of 3 items weighs 70 pounds. So it will cost $49 to be shipped by Economic Ground Freight Service in the U.S.A. Please check out my other listings for different HOSSFELD items.
|
|
|
HOSSFELD 2" OD 180 DEGREE FORMING DIE SET w/ BACK & DRAW BLOCKS
HOSSFELD- THREE DIE PARTS for 2" OD TUBING- 2" OD TUBING 180 DEGREE 2" X 6" FORMING DIE(Part#30716) with 2" OD TUBING BACK BLOCK and 2" OD TUBING DRAW BLOCK. Please see photo of the items. There is also a digital image from the HOSSFELD website to show an application of these items. The list price for these items is rather expensive. I PAID OVER FOUR HUNDRED DOLLARS FOR THEM! Instead of spending a lot to buy brand new items. Save a lot of money and buy these lightly used items. These are all great heavy duty tools. This group of 3 items weighs 55 pounds. So it will cost $49 to be shipped by Economic Ground Freight Service in the U.S.A. Please check out my other listings for different HOSSFELD items.
|
|
|
HOSSFELD DIES PINS BLOCKS PLATES PARTS
HOSSFELD- 25 GENERAL PURPOSE PARTS- Pins Dies Blocks Plates and Parts. Plus the 1996 Parts Catalog and Price List. Please see photo of the items. There are also some digital images from the HOSSFELD website to show various applications of these items. The list price for these items is rather expensive. I PAID OVER SIX HUNDRED DOLLARS FOR THEM! Instead of spending a lot to buy brand new items. Save a lot of money and buy these lightly used items. These are all great heavy duty tools. This group of 25 items weighs 75 pounds. So it will cost $49 to be shipped by Economic Ground Freight Service in the U.S.A. Please check out my other listings for different HOSSFELD items.
|
|
|
HOSSFELD 7/8" OD Tube 180-Degree and two 7/8" OD Tube FEED ALONG DIES
HOSSFELD- FIVE DIE PARTS for 7/8" Outside Diameter TUBING- 180 OD 7/8" X 41/4" part#23162- with 7/8" OD DRAW BLOCK and 7/8" OD BACK BLOCK- Also includes two FEED ALONG 7/8" OD TUBE DIES- FA OD 7/8" X 14" part#23362 as well as FA OD 7/8" X 11" part#23328. Please see photo of the items. There are also some digital images from the HOSSFELD website to show various applications of these items. The list price for these items is rather expensive. I PAID OVER FIVE HUNDRED DOLLARS FOR THEM! Instead of spending a lot to buy brand new items. Save a lot of money and buy these lightly used items. These are all great heavy duty tools. This group of 5 items weighs 30 pounds. So it will cost $49 to be shipped by Economic Ground Freight Service in the U.S.A. Please check out my other listings for different ... moreHOSSFELD items.
|
|
|
HOSSFELD 2" OD TUBE FEED ALONG DIE w/ COMPOUND LINKAGE & BACK BLOCK
HOSSFELD- FOUR DIE PARTS for 2" Outside Diameter TUBING- 2" OD TUBING FEED ALONG DIE(FA OD 2" X 10" 2" OD TUBING DRAW BLOCK WITH COMPOUND LINKAGE(Part#30765) LOCKING PIN- 2" OD TUBING BACK BLOCK. Please see photo of the items. There are also some digital images from the HOSSFELD website to show various applications of these items. The list price for these items is rather expensive. I PAID OVER FIVE HUNDRED DOLLARS FOR THEM! Instead of spending a lot to buy brand new items. Save a lot of money and buy these lightly used items. These are all great heavy duty tools. This group of 4 items weighs 30 pounds. So it will cost $49 to be shipped by Economic Ground Freight Service in the U.S.A. Please check out my other listings for different HOSSFELD items.
|
|
|
HOSSFELD 1" TUBE 180 FORM + 1" PIPE & 1" TUBE FEED ALONG DIES with BLOCKS
HOSSFELD- SEVEN DIE PARTS for 1" TUBE& PIPE- 1" TUBE 180 DEGREE 1" X 6" FORMING DIE(Part#23915) 1" X 11-3/4" TUBE FEED ALONG DIE(Part#24077) 1" X 13" PIPE FEED ALONG DIE(Part#34168) 1" BACK BLOCK and 1" DRAW BLOCK. Also includes 1" BACK BLOCK WITH 1" Footing Pin as well as a 1" BACK BLOCK WITH 1/2" Footing Pin. Please see photos of the items. There are also some digital images from the HOSSFELD website to show applications of these items. The list price for these seven items is rather expensive. I PAID OVER FIVE HUNDRED DOLLARS FOR THEM! Instead of spending a lot to buy brand new items. Save a lot of money and buy these lightly used items. These are all great heavy duty tools. This group of 7 items weighs 45 pounds. So it will cost $49 to be shipped by Economic Ground ... moreFreight Service in the U.S.A. Please check out my other listings for different HOSSFELD items.
|
|
|
Hossfeld Iron Bender - Fabrication - Metal Working - Metal Break
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Hossfeld Iron Bender- Fabrication- Metal Working- Metal Break Item Description: This is a Hossfeld Iron Bender. Retired from service in a school machine shop. The items included in this auction were not tested ... moreat inspection. Their operational status is unknown. NOTES: Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in South San Francisco. CA, 94080. Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 39068) nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. unknown, nbsp, nbsp, Features: unknown, nbsp, nbsp, Date of Manufacture: unknown, nbsp, nbsp, Color: gray, nbsp, nbsp, Condition: This item is used and sold as-is. Due to the location. This item was NOT TESTED for operation. Item may need service and/or parts to make operational. nbsp, nbsp, Pickup Logistics and Handling: No loading dock or forklifts
|
|
|
HOSSFELD No. 2 PIPE TUBING BENDER WITH HYDRAULIC UNIT TONS OF DIES & TOOLING
This is truly the Biggest Hossfeld bending package on ebay! Over 70 dies included in this set. Hossfeld Bender Model No.2 shop kit with hydraulic pack and tons of dies and extras. And manuals. Includes: Model No.2 Bender and shop kit hydraulic pack upgrade"L-type" swinging frame and spare standard bending arm pedestal stand heavy duty 3/4" thick metal base on industrial casters pipe set of dies in multiple sizes bar set angle iron leg in set and leg out set basic tool set OD tube set in multiple sizes edge bend die set one stroke hydraulic cylinder and mount kit 180 degree OD tube die sets in several sizes Feed- along OD tube die sets in multiple sizes One-pull EMT die sets and feed along die sets in multiple sizes several self locking cam dies eye bolt bending dogs multiple sizes of steel and cast rollers for flat and bar ... morestock several flat face radius blocks square tubing die sets in multiple sizes notched angle iron die scroll dies channel dies handrail cap dies and more. All dies are authentic Hossfeld email or text/call 910-723-0184 for more info or to set an appointment to view the equipment. Available for local pickup. Can crate this for shipment. Please contact us for a shipping quote if needed. and If this sells for the Buy It Now price. I will personally deliver it to you( up to 400 miles from zip code 28334) after your payment has cleared.
|
|
|
Hossfeld 2 Hydraulic Bender with Lots of Dies !80 degree Swing arm
Hossfeld universal metal worker can perform hundreds of jobs from simple pipe bending and arcing to shearing. It will bend angle the hard way and do all you wrought iron and railing work. This is a serious tool made to last. You can do one off jobs or with the hydralics set it it to do production work. I have tons of die and hossfeld sell tons more you can easily make you own or have them made for your application. I used this in my welding shop and it was invaluable. Thanks for looking Note: some tooling may have surface rust. I move it from my shop to a storage building and have since noticed some tooling developing surface rust, easily remove but I wanted to be up front about it. Never any problems with the hydraulics.
|
|
|
Hossfeld No. 1 Bender # 52 6" & 9" Angle Iron Inner Radius Block
All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. International Bidders Please Inquire About Shipping Cost Prior To Bidding SOTTOF SALES In good shape but one end dose have a small chip. Center hole is approx. 13/16" dia. Fits No. 1 Hossfeld Universal Bender will NOT fit No. 2 Bender. D4256.6 EBAY AUCTION POLICIES: Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist ... moreor re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
|
|
|
Hossfeld NO2, Inner Radius Block, 12" to 15" , Metal working, Bending, Outbend,
Hossfeld NO2 Inner Radius Block 12" to 15" nice condition.
|
|
|
HOSSFELD #31 RADIUS BLOCK FOR A #1 BENDER
RADIUS BLOCK FOR A HOSSFELD#1 BENDER. APPEARS UNUSED AND STAMPED 3.5 MIGHT HAVE BEEN CUSTOM MADE. GOT IT WITH A LOT OF TOOLING AND I HAVE A#2 SO I DON'T NEED THIS DIE
|
|
|
HOSSFELD #1 BENDER SWINGING ARMS FOR BENDING ANGLE IRON.PART # 05222
SWINGING ARMS FOR A HOSSFELD#1 BENDER TO BEND ANGLE IRON. COMES WITH THE TWO PRONGS PART#05252.GOOD SHAPE.GOT IT WITH A LOT OF TOOLS. I HAVE A NUMBER 2 SO I DON'T NEED IT. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-146a3e2cb90-0x108-
|
|
 |