In 
 
Order by: 
Available to: 
Price: 
 - 
$
52.2
Buy It Now
$6.96 Shipping
Condition: New
Location: Netherlands
$
1,295
Buy It Now
$21.95 Shipping
Condition: Seller refurbished
Location: Culver City,CA,USA
Agilent E9321A 50 MHz- 6 GHz(65 to +20 dBm) Peak/ Average Power Sensor- CALIBRATED! You are bidding on an Agilent E9321A 50 MHz- 6 GHz(65 to +20 dBm) ... moreE-Series Peak& Average Power Sensor. The sensor will come with a fresh certificate of calibration from an ISO 17025 accredited cal lab. 1xEV-DO. GSM, EDGE and NADC wireless systems— simplify development, verification, and manufacturing with the EPM-P power meters and E9320 E-Series power sensors. Features: 300 kHz video bandwidth. Ideal for GSM, EDGE and NADC applications Fast measurement speed. Up to 1000 corrected readings per second, via the GPIB Wide dynamic range Calibration factors. Linearity, temperature and bandwidth correction stored in EEPROM Precision type-N connector as standard Operates with the EPM-P series and P-Series power meters This unit is in excellent condition. Has been fully tested and comes with a 5 day ROR should it not perform to your expectations. Insurance is included in UPS shipping charges. I cannot ship internationally. I will accept payment for this item by Paypal only. Feel free to send any questions regarding this item to: in fact I encourage you to do so) If you have zero feedback. Please before you bid to let me know that you are serious. Otherwise I may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed. Please note that shipping and insurance costs are non-refundable. I'm always very happy to leave appropriate feedback(hopefully very positive) Make sure that you check out for great deals on other test and measurement equipment. Thank you and good luck bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-146bd3087ef-0x112-
$
617
Buy It Now
$90 Shipping
Condition: New – Open box
Location: Ukraine
Frequency meter CH3-63 electronic counter analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general ... moreElectric, but has the same or better characteristics. This device can be used for wide measurement range. Frequency meter CH3-63 electronic counter i s designed to measure sinusoidal signal frequency and period. Pulse signals repeat frequency and period. Pulse width. Electrical signals frequency ratio. Account number( summation) of electrical oscillations. Sinusoidal signal frequency measurement range 0.1 Hz- 1000 MHz( 0.03- 10 V rms) Pulse signal measured range 0.1 Hz- 200 MHz(0.1- 10 V) Frequency measurement error ± 5• 10-7 ± 1 n s. Frequency meter CH3-63 electronic counter is designed to measure sinusoidal signal frequency and period. Pulse signals repeat frequency and period. Pulse width. Electrical signals frequency ratio. Account number( summation) of electrical oscillations. Frequency meter CH3-63 electronic counter is used to configure, test and calibrate various transceiver circuits. Filters, oscillators, frequency synthesizers. Communication systems and other devices. Software code remote control and ability to release information to external recording device is available, you can use the device in information-measuring systems and technology. Controlled by EBM. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices frequency meter electronic counter CH3-63: Sinusoidal signal frequency measurement range 0.1 Hz- 1000 MHz( 0.03- 10 V rms) Measured pulse signal range 0.
$
7,990
Buy It Now
$65 Shipping
Condition: Seller refurbished
Location: Culver City,CA,USA
$
279.01
Buy It Now
Free Shipping
Condition: New
Location: Elmwood Park,NJ,USA
For Any Question. Please call 1-949-215-7151, ask for Shawn STORE CATEGORIES We Provide a full-range of professional production equipment and services ... morewith emphasis on digital media science in Post Production. International DSM Group can help you build and customize your media technology business network. From individual workstations accessorizing complete broadcast HD and film facility level. DESCRIPTION Fluke Electronics High Voltage Probe FLK-80K-40 SPECIFICATIONS The 80K-40 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 40.000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance. Features: A high voltage probe that allows a multimeter to measure up to 40.000V respectively. Intended for low energy applications only One year warranty, Item Condition- NEVER USED BRAND NEW SYSTEM- Full Hardware Warranty Shipping Agreement- Buyer will pay actual shipping costs. Including extra for packaging only if needed. Shipping costs based on weight TBD after auction. Item(s) will be shipped via USPS. UPS, FedEx. Insured) Payment Information. Paypal or wire transfer guarantees immediate shipping upon receipt and verification. Payment must be received within 3 days of the closing auction Terms& Conditions- Please e-mail or call for any questions prior to bidding. Phone: +1-949-215-7151- We reserves the right to refuse a winning bid from a buyer with numerous negative feedback. International DSM Group reserves the right to cancel the auction if bid retractions occur during last 24 hours of auction. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
150.85
Buy It Now
$0 Shipping
Condition: New
Location: China
$
16.59
Buy It Now
$2.19 Shipping
Condition: New
Location: China
$
34.99
Buy It Now
$18 Shipping
Condition: Used
Location: Milton Freewater,OR,USA
$
1,235
Buy It Now
$135 Shipping
Condition: New – Open box
Location: Ukraine
$
92.49
Buy It Now
$4.99 Shipping
Condition: New
Location: China
$
55
Buy It Now
$15 Shipping
Condition: Used
Location: Chatsworth,CA,USA
$
990
Buy It Now
$24.95 Shipping
Condition: Used
Location: Culver City,CA,USA
Anritsu ML2437A Single Channel High Accuracy Power Meter(10 Mhz- 110 GHz) CALIBRATED! You are bidding on an Anritsu ML2437A Single Channel High Accuracy ... morePower Meter(10 Mhz- 110 GHz) The ML2437A and ML2438A Power Meters combine the advantages of thermal meter accuracy. Diode meter speed, and peak power meter display graphics. The result is a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. These meters include graphics display capability as a standard feature. The ruggedized housing and optional high-capacity NiMH battery bring laboratory quality accuracy to field service applications. ML2437A has one input, and ML2438A has two inputs. Power Sensors(–70 to + 20 dBm) Model No. Range MA2468A 10 MHz – 6 GHz MA2469B 10 MHz – 18 GHz(–60 to +20 dBm, nominal bw 1.2 MHz) MA2472A 10 MHz – 18 GHz MA2473A 10 MHz – 32 GHz MA2474A 10 MHz – 40 GHz MA2475A 10 MHz – 50 GHz. Sensors sold separately. You can view the specs for this unit here: Insurance is included in UPS shipping charges. I cannot ship internationally. I will accept payment for this item by Paypal only. Feel free to send any questions regarding this item to: in fact I encourage you to do so) If you have zero feedback. Please before you bid to let me know that you are serious. Otherwise I may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed. Please note that shipping and insurance costs are non-refundable. I'm always very happy to leave appropriate feedback(hopefully very positive) Make sure that you check out for great deals on other test and measurement equipment. Thank you and good luck bidding.
$
167
Buy It Now
$25 Shipping
Condition: New – Open box
Location: Ukraine
$
233
Buy It Now
$55 Shipping
Condition: New – Open box
Location: Ukraine
$
167
Buy It Now
$70 Shipping
Condition: New – Open box
Location: Ukraine
$
1,739.79
Buy It Now
$521.94 Shipping
Condition: New
Location: China
$
148.89
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
2,165.35
Buy It Now
$200 Shipping
Condition: New – Open box
Location: Ukraine
High precision Pulse oscilloscope calibrator I1- 17 analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke ... moreand general Electric, but has the same or better characteristics. This device can be used for wide measurement range. Calibrator I1-17 is designed to work as AIC part. Or as autonomic device for checking PX Y- tracks oscilloscopes of 1- 4th accuracy class in frequency range 0MHz- 10MHz. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices Calibrators I1-17: Device can measure the following PX parameters: rise time. Settling time. Release at top, unevenness and summit slope. Device calibrator I1-17 is used in AIC monitoring metrological oscilloscopes characteristics. As well as to measure PX parameters linear four- pluses( video amplifiers. Attenuators. Etc) with bandwidth 0MHz- 10MHz. Generator I1-17 includes manual mode and an external program control parameters via KOP. Programmable microprocessor is used as part of device; Device calibrator I1- 17 operating modes: Mode 1: Single positive and negative polarity pulse sequence: Porosity- is not less than 100; Rise time- 8.5 ns; Cut duration- is not more than 100 ns; Pulse duration- 0.1 mks– 999.9 mks; Maximum amplitude- 35V; Spike on pulse top- is less than 1.5% Pulse top irregularity- is not more than 0.75% Device calibrator I1-17 mode 2: Single positive and negative polarity pulse sequence: Porosity- is not less than 10; Rise time- 100 ns; Cut duration- is not more than 200ns; Pulse duration 0.1 mks–
$
60.22
Buy It Now
$18.07 Shipping
Condition: New
Location: China
$
550
Buy It Now
$37.5 Shipping
Condition: Used
Location: Culver City,CA,USA
Agilent E4418B EPM Series 110 GHz Single-Channel Power Meter You are bidding on an Agilent E4418B Power Meter. The Agilent E4418B is a low-cost. High-performance, ... moresingle-channel, programmable power meter. It is fully compatible with the 8480 series and the E-series power sensors(except the E9320A family) Depending upon which sensor is used, the E4418B can measure from-70 dBm to +44 dBm at frequencies from 9 kHz to 110 GHz. Designed for bench and automatic test equipment use(ATE) the E4418B makes fast(up to 200 readings per second with E-series sensors) accurate and repeatable power measurements. Features: Fast measurement speed(up to 200 readings per second. Over the GPIB, with E-series sensors) Speed improvement of x2 using the 8480 series power sensor(compared to the 437B) No range-switching delays with 8480 series sensors. And only one fast-range switching point with E-series sensors RS 232/422 serial interfaces as standard GPIB connector for remote control of all functions Internal rechargeable battery option provides up to 3 hours continuous use(option 001 only) Code compatibility with 438A You can view the performance specifications here: This unit is in excellent condition. Has been fully tested and is guaranteed functional. It comes with a 5 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. Insurance is included in UPS shipping charges. I cannot ship internationally. I will accept payment for this item by company check. Cashiers check and wire transfer only. Feel free to send any questions regarding this item to: in fact I encourage you to do so) If you have zero feedback. Please before you bid to let me know that you are serious. Otherwise I may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers h
$
217
Buy It Now
$55 Shipping
Condition: New – Open box
Location: Ukraine
Wattmeter D5004 analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the same ... moreor better characteristics. This device can be used for wide measurement range. For sake is 1 of 9 wattmeters for your coice! Please see the table. Wattmeter D5004 is designed to measure power in single-phase AC and DC circuits. Accuracy class 0.5. Wattmeters D5004 are designed to measure power in single-phase AC and DC circuits. Wattmeter D5004 is designed to be used in temperate climate in dry heated rooms at an ambient temperature from 10 ° to 35 ° C and relative humidity up to 80% at 25 ° C; Wattmeter D5004-04.1is designed to be used in both dry and humid tropical climates in closed air-conditioned or partially air-conditioned rooms at an ambient temperature from 1 ° to 45 ° C and relative humidity up to 80% at 25 ° C(GOST 15150- 69) Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices wattmeter D5004: Accuracy class 0.5 in accordance with GOST 8476-78. Wattmeters D5004 nominal current and voltage are shown in table 1. Series circuit power consumption in normal frequencies range does not exceed 0.35 V• A. Operating frequency range- 0.7 V• A, in normal frequency range from 45 to 65 Hz. Operating frequency range over 65 Hz to 500 Hz. Nominal power coefficient 1. Nominal parallel circuit current- 3mA. Wattmeter D5004 acceptable additional error limit caused by frequency deviation from 65 Hz up to any frequency in operating frequency range is equal to ± 0.5% of final measureme
$
250
Buy It Now
$245 Shipping
Condition: Used
Location: Ukraine
Frequency meter C H3-34 electronic counter analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general ... moreElectric, but has the same or better characteristics. This device can be used for wide measurement range. Condition: Used(lightly used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device frequency meter C H3-34 electronic counter: Frequency measurement range- 10Hz- 120MHz(0.12 GHz- 4 GHz with block YA3CH-51) Frequency range in measurement period- 0.01 Hz- 100kHz; Measurement error: Frequency- ± δ 0 ± 1 unit. count. Period- ± δ 0 ±( 3 ∙ 10-3) n) ± ƒ out/ ƒ takt ∙ n) Measured time intervals range- 10-7 s- 10 2 s; Frequency ratio limits measurement- 10Hz- 20MHz) 0.01 Hz- 100 kHz) Voltage input signal C H3-34: Sinusoidal- 0.1 V-100V; Pulse- 0.5 V-100V; Quartz generator frequency instability for 1 day- ± 5 ∙ 10-9; Input impedance: At frequency measurement- 15 kOhm/80pF; At period measurement- 1 kOhm/100pF; Power consumption- 100V ∙ A; C H3-34 dimensions– 480x120x420mm; Weight- 22kg. Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufa
$
2,104.25
Buy It Now
$0 Shipping
Condition: Used
Location: China
$
50.99
Buy It Now
$0 Shipping
Condition: New
Location: China
$
799.84
Buy It Now
$105 Shipping
Condition: New – Open box
Location: Ukraine
Frequency meter CH3-68 electronic counter analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general ... moreElectric, but has the same or better characteristics. This device can be used for wide measurement range. Frequency meter C H3-68 electronic counter is designed to measure continuous sinusoidal signal frequency. Carrier frequency of IM and AM signals. Quartz frequency stress issue. Channel A: Frequency range 10 kHz- 100 MHz; Input signal level 10 mV- 10 V; Input resistance 1MOhm; Input capacitance 25pF; Channel B: Frequency range 0.1 GHz- 12GHz; Input signal level 0.1- 5MWatt; Input resistance 50 Ohm. Frequency meter C H3-68 electronic counter is used to measure continuous sinusoidal signal frequency. Carrier frequency of IM and AM signals. Quartz frequency stress issue. Frequency meter C H3-68 electronic counter is used for setup, calibration and testing of various transceiver circuits. Filters, and microwave generators for setting up communication systems and other devices. Built-in microprocessor controller provides automatic harmonics number identification and direct frequency measured values ​​ calculation and display it on digital display. Frequency meter C H3-68 electronic counter. Which has a wide range of measured frequency, is small-sized device. Designed for operation in harsh using conditions. Main application: setup. Calibration, various kinds testing, transceiver circuits. Filters, generators, to set up communication systems and other devices. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Techn
$
25.75
Buy It Now
$0 Shipping
Condition: New
Location: Walnut,CA,USA
$
2,236.74
Buy It Now
$671.02 Shipping
Condition: New
Location: China
$
625
Buy It Now
$65 Shipping
Condition: New – Open box
Location: Ukraine
Modulation meter CK3-45 analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has ... morethe same or better characteristics. This device can be used for wide measurement range. Modulation meter CK3-46 is designed to measure modulation parameters of communication equipment. It measures peak frequency deviation value and amplitude modulation coefficient. Low harmonics level introduced into measured signal. And low-frequency output availability can measure modulation law distortion AM and CHM signals. CK3-46 operating principle is based on spectrum transfer of measured signal frequency to intermediate frequency. Followed by demodulation and selected distortion of modulated signal measurements. Measurement process is fully automated. Device CK3-46 is automatically calibrated. Tuned to frequency and input signal, and selects desired scale. Programmatically control is possible with measurement results issuance to external recording device via KOP. CK3-46 has a high speed( measuring time is not more than 3 seconds) and is easy in use. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices modulation meter CK3-46: Fixed frequencies range: In AM mode- 5 MHz- 6MHz. 10MHz- 500MHz; In CHM mode- 5MHz- 6MHz. 10MHz- 1500MHz; Modulating frequency range- 0.05 kHz- 30kHz; CK3-46 sensitivity- 30 mV( 10MHz- 500MHz) 50mV( 500MHz- 1000MHz) 100mV( 1000MHz- 1500MHz) Measurement limits( in range 0.3 kHz-3. 4 kHz at F м = 1kHz) AM coefficient- 1% 100% Error 2% Frequenc
$
5,120
Buy It Now
$300 Shipping
Condition: Used
Location: Korea, South
$
683
Buy It Now
$90 Shipping
Condition: New – Open box
Location: Ukraine
Frequency meter CH3-63/1 electronic counter analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general ... moreElectric, but has the same or better characteristics. This device can be used for wide measurement range. Frequency meter CH3-63/1 electronic counter is designed to: Sinusoidal frequency and pulse repetition frequency signals measurements; Period and period following sinusoidal signal measurements; Pulse duration measurement; Measuring ratio of electrical signals frequency; Counting number of electrical signals; Reference frequency signal issuance; Release of information about measurements results on recording device. Frequency meter CH3-63/1 electronic counter is used to configure, test and calibrate various transceiver circuits. Filters, generators. Communication systems and other devices. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices frequency meter electronic counter CH3-63/1: Device operating conditions: Ambient temperature from-30 º C to +50 ° C; Relative humidity up to 98% at 25 ° C; At input A device measures sinusoidal signal frequency and pulse signals repeat frequency of any polarity. With not more than two extreme values for the period ranging from 0.1 Hz to 200 MHz at input signal voltage: From 0.03 V to 10 V for sinusoidal signal; From 0.1 V to 10 V for pulse shape signal; Pulse input signal minimum duration is 2.5 ns; At input B device measures sinusoidal signal frequency in range from 200MHz up to 1000MHz with input signal voltage from 0.03 V to 3 V. In ra
$
2,167
Buy It Now
$105 Shipping
Condition: New – Open box
Location: Ukraine
Micro flux meter F191. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has ... morethe same or better characteristics. This device can be used for wide measurement range. Is designed to measure small permanent magnetic flux and induction in air magnetic circuits gap. Measuring range: 0-2000mkVb Accuracy: 1% Micro flux meter F191 is designed to measure small permanent magnetic flux and induction in air magnetic circuits gap. Micro flux meter F191 is designed to operate in dry closed and heated rooms at an ambient temperature of 10 ° to 35 ° C and relative humidity of 80% at 25 ° C(group 2 GOST 22261-76) To operate in tropical climate in temperature range of 10 to 25 ° C and relative humidity of 80% at 25 ° C micro flux meter F191 04.1 is used(version 0. Category 4.1 GOST 15150-60) Micro flux meter F191 consists of blocks: photo galvanometric amplifier F191/ F; control F191/ Y. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices micro flux meter F191: Measurement range. Acceptable basic error limit, circuit resistance measurement, pointer sliding time are shown in table 1. Table 1 Measurement range. MkVb Acceptable basic error limit. Circuit resistance measurement. Ohm, not more than Pointer sliding time at 1 division. S, not less than 2-0-2 mkVb ±2. 5 100 10 5-0-5 mkVb ±1. 0 100 15 10-0-10 mkVb ±1. 0 150 20 20-0-20 mkVb +1. 0 150 30 50-0-50 mkVb ±1. 0 300 60 100-0-100 mkVb ±1. 0 300 60 200-0-200 mkVb ±1. 0 500 60 500-0-500 mkVb +1. 0 500 8
$
2,334
Buy It Now
$55 Shipping
Condition: New – Open box
Location: Ukraine
High precision Milli veber meter M1119 analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, ... morebut has the same or better characteristics. This device can be used for wide measurement range. Is designed for continuous magnetic flux measurement. As well as to measure magnetic induction in air gap magnetic circuits with permanent magnetic fluxes. Milli veber meter M1119 portable magneto system with electromagnetic zero- setting designed to measure static magnetic flux. As well as to measure magnetic induction in air gap magnetic circuits with permanent magnetic fluxes at an ambient air temperature from 10 ° to 35 ° C and relative humidity up to 80% at 25 ° C. Milli veber meter M1119. Manufactured in the tropical version. Designed for operation at ambient air temperature of 10 ° to 25 ° C and relative humidity up to 80% at 25 ° C and is marked as M1119 4.1 Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices Milli veber flux meter M1119: Measurement range 0- 10 mVb when measuring one coil. Acceptable basic error limit does not exceed: ± 1.0% of full scale measurement range when measuring resistance of coil up to 10 Ohm; ± 2.5% in coil resistance up to 20 Ohm; ± 4.0% in coil resistance up to 30 Ohm. Slipping" in any direction around scale for 5seconds does not exceed 2% of scale length at external resistance 30 Ohm. M1119 measurement change. Caused by change of ambient temperature from(20 ± 5) ° C to any temperature between 10 and 35 ° C
$
2,385.23
Buy It Now
$190 Shipping
Condition: New – Open box
Location: Ukraine
Modulation meter CK3-45 analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has ... morethe same or better characteristics. This device can be used for wide measurement range. Presence in modulation meter CK3-45 built-in microcomputer can increase measurement productivity and extend device functions to system capabilities. Which provides coefficient AM measurement, frequency deviation. Input signal voltage and frequency, harmonic coefficient and modulating signal frequency. Measurement results calculation and its correction are carried out in digital form. Device modulation meter CK3-45 provides logarithmic readout of measured values. To rapid automatic calibration of meter modulation. It has built-in model power signal. Device modulation meter CK3-45 can operate on AIC by KOP. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices modulation meter CK3-45: Carrier frequency range 0.1- 1000 MHz; 0.1- 10000 MHz Modulating frequencies range 0.02-200 kHz Measurement range: coefficient AM 0.1- 100% frequency deviation 1-10 6 Hz harmonic coefficient distortion 1-10% input signal voltage 0.1– 1V modulation frequency 0.02-200 kHz Basic error measurement limits; coefficient AM ± 2% frequency deviation ± 2% input signal voltage ±(2-3) dB harmonic coefficient distortion ± 10% background and noise value 0.05-0.2% AM) 2• 10-8 fc +2 Hz( CHM) Harmonic coefficient. Introduced by modulation signal distortion. 0.3-0.6% AM) 0.1- 1% CHM) Weight- 17kg Warranty 12mounth. Delivery term This
$
1,799.36
Buy It Now
$160 Shipping
Condition: New – Open box
Location: Ukraine
High precision M easuring device P- 321M analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general ... moreElectric, but has the same or better characteristics. This device can be used for wide measurement range. M easuring device P- 321M is designed for voice channels field measurements. Pre group channels and lines of communication in frequency range from 0.3 kHz to 32 kHz. As well as to measure signal levels in frequency range from 0.2 kHz to 150 kHz and control testing at frequency 62kHz and 101kHz. M easuring device P- 321M: residual damping(amplification) measurement; amplitude- frequency characteristics measurement; working lines attenuation measurement; signal levels measurement in frequency range from 0.2 kHz to 150 kHz; integral levels measurement of noise in voice frequency channel; functional test of the primary group circuits at frequencies 62kHz and 101kHz. Device can be installed in hardware of mobile communication centers and hardware maintenance. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices m easuring device P- 321M: Generator: Fixed frequencies values ​​- 300Hz. 400Hz. 600Hz. 800Hz. 1200Hz; 1400Hz; 1600Hz. 2000Hz; 2400Hz; 2697Hz; 3000Hz; 3404Hz. 5000Hz. 8000Hz; 12306Hz; 14118Hz; 16000Hz; 18113Hz. 20000Hz. 22326Hz; 23400Hz; 32000Hz; 61930Hz; 101050Hz; Measuring device P- 321M basic error at frequency- + 0.001 Hz; Output level range: Under load 600 Ohm- 45dB. +18 dB; Under load 150 Ohm- 45dB. + 5 dB; Output level basic er
$
5,450
Buy It Now
$39.95 Shipping
Condition: Seller refurbished
Location: Culver City,CA,USA
Keithley 2601 Single-Channel System SourceMeter(40 W. 3A DC, 10A Pulse) CALIBRATED! You are bidding on a Keithley 2601 Single Channel System SourceMeter. ... moreThis unit is in pristine condition and has a fresh calibration good thru January 2016! Series 2600 System SourceMeter instruments offer electronic component and semiconductor device manufacturers a scalable. High throughput, highly cost-effective solution for precision DC, pulse, and low frequency AC source-measure testing. Building on the tightly integrated source-measure technology originally developed for Keithley's popular Series 2400 SourceMeter line, Series 2600 instruments provide from two to four times the test speed of competitive solutions in I-V functional test applications. They also offer higher source-measure channel density and a significantly lower cost of ownership than competing products. The analog-to-digital converters provide simultaneous I and V measurements in less than 100µs(10,000 rdgs/s) and source-measure sweep speeds of less than 200µs per point(5,500 points/s) This high speed source-measure capability, plus advanced automation features and time-saving software tools make Series 2600 SourceMeter instruments an ideal solution for I-V testing of a wide range of devices. Related Applications: I-V functional test and characterization of a wide range of devices, including: Discrete and passive components Two-leaded– Resistors, disk drive heads, metal oxide varistors(MOVs) diodes, zener diodes, sensors, capacitors, thermistors Three-leaded– Small signal bipolar junction transistors(BJTs) field-effect transistors(FETs) and more Parallel test– Two- and three-leaded component arrays Simple ICs– Optos, drivers, switches, sensors Integrated devices– Small Scale Integrated(SSI) and Large Scale Integrated(LSI) Analog ICs Radio frequency integrated circuits(RFICs) Application specific integrated circuits(ASICs) System on a chip(SOC) devices Optoelectronic devices such as light-emitting diodes(LEDs) laser diodes, high brigh
$
583
Buy It Now
$75 Shipping
Condition: New – Open box
Location: Ukraine
Medium accuracy wave meter CH2-9A analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, ... morebut has the same or better characteristics. This device can be used for wide measurement range. Medium accuracy wave meter CH2-9A is designed to measure frequency of undamped and pulse-modulated oscillations of decimeter range waves. Measured frequencies range(wave lengths) 1765MHz-3750MHz(17- 8 cm) Frequency measurement error does not exceed ± 0.05% Dimensions- 272x1160x155 mm. Weight- 4 kg. Medium accuracy wave meter CH2-9A(CH29A. CH2 9A) is designed to measure frequency of undamped and pulse-modulated oscillations of decimeter range waves. Medium accuracy wave meter CH2-9A is designed to be used in laboratory and field conditions. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices accuracy wave meter CH2-9A: 1. Wave meter measurement frequency range(wave lengths) 1765MHz- 3750MHz( 17- 8 cm) 2. Frequency measurement error does not exceed ± 0.05% 3. Wave meter sensitivity at frequency measurement: undamped oscillations are not worse than 300 mkWatt; pulse- modulated waves are not worse than 40 mWatt(amplifier sensitivity) 4. Operating temperature range of-30 ° C up to +50 ° C. At temperatures from-30 ° C up to +10 ° C and of +30 ° C to +50 ° C temperature correction must be considered according to schedule given in devise specification. 5. Voltage supply(at frequency measurement of pulse- modulated waves) 50 or 400-600 Hz voltage 115V. 127V or 220V ± 10% or from
$
1,100
Buy It Now
$90 Shipping
Condition: New – Open box
Location: Ukraine
High precision Phase difference meter F2-34 analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general ... moreElectric, but has the same or better characteristics. This device can be used for wide measurement range. Device is used for precision measurements of phase shifts and increments between two synchronous harmonic signals in a wide frequency range. Input voltage range: Directly at inputs 1 and 2 0.002-2 V With external dividers 1:100 0.2-200 V Frequency range 0.5Hz-5MHz Phase difference meter F2-34 is used for precision measurements of phase shifts and increments between two synchronous harmonic signals in a wide frequency range. Phase difference meter F2-34 is used in phase-frequency characteristics measurement of amplifiers and phase-amplitude. Attenuators, delay lines. Semiconductors parameters. Dielectrics, magnetic materials, filters, resonators, low-frequency antennas. Phase difference meter F2-34 is based on structural phase meter circuit with constant measurement time. Phase difference meter F2-34 has manual mode, remote code control and measurements results output in BCD code to printer. Phase difference meter F2-34 features: High accuracy and resolution- 0.01 ° Digital representation of measurement results 4 ½ digit indicator Results output in digital print device Input active resistance is at least 1 MOhm Device F2-34 input capacitance is not more than 25pF Temperature for guaranteed accuracy 20 ± 5° C Phase difference meter F2-34 replaces: F2-11. F2-13. F2-16 Phase difference meter F2-34 is used in determining phase-frequency and phase-amplitude amplifiers characteristics, semiconductor devices parameters, attenuators, magnetic materials, delay lines. Insulators. Resonators, when you set up filters, low-frequency antennas. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resi
$
4,999.99
Buy It Now
$215 Shipping
Condition: New – Open box
Location: Ukraine
Spectrum analyzer CK4-56 analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has ... morethe same or better characteristics. This device can be used for wide measurement range. Spectrum analyzer CK4-56 is designed to research arbitrary waveform and signal modulation spectrum. As well as stationary noise spectrum. High resolution. Oscillator parasitic modulation low levels. And extra mixing presence. Which extends frequency range up to 300 MHz with an external oscillator. Enable to study spectrum near carrier. Due to large dynamic range of spectrum analyzer CK4-56 can be used for parasitic noise signal modulation source research and distortion detection caused by nonlinearities tracts. Research generator presence. Which forms signal frequency is equal to device spectrum analyzer CK4-56 setting frequency can measure ACHX four-pluses with high resolution and accuracy. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device s pectrum analyzer CK4- 56: Spectrum analyzer CK4- 56 i s used to research arbitrary waveform and signal modulation spectrum. As well as stationary noise spectrum. Frequency range 0.01 kHz- 300 MHz. Swath 0.05-50 kHz( discretely at 1. 2. 5) Bandwidth at level- 3dB: 3Hz. 10Hz. 30Hz. 100Hz, 300Hz. Measurement accuracy: levels 5-8% relations between levels ±(3-10) frequency ±(10-4 + P + 1) Hz. Spectrum analyzer CK4-56 is designed to research arbitrary waveform and signal modulation spectrum. As well as stationary noise spectrum. High resolution. Os
$
732.45
Buy It Now
$219.74 Shipping
Condition: New
Location: China
$
61.73
Buy It Now
$61.74 Shipping
Condition: New
Location: United Kingdom
$
67.42
Buy It Now
$62.33 Shipping
Condition: New
Location: United Kingdom
$
24.16
Buy It Now
$0 Shipping
Condition: New
Location: China
$
79.95
Buy It Now
$12.95 Shipping
Condition: New
Location: Saratoga,CA,USA
$
149
Buy It Now
$10 Shipping
Condition: New
Location: India
$
833
Buy It Now
$90 Shipping
Condition: New – Open box
Location: Ukraine
Frequency meter PCH3-07-0002 electronic counte r analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and ... moregeneral Electric, but has the same or better characteristics. This device can be used for wide measurement range. Frequency meter PCH3-07-0002 electronic counter is designed for: sinusoidal frequency and pulse signals repeat rate measurements in the range from 0.1 Hz to 125MHz; sinusoidal period and sinusoidal signal following period measurements in the range from 0.1 mks to 1.0 4 s; time intervals and pulse durations measurements in the range from 0.1 mks up to 10 4 s; electrical signals frequency ratio measurements in range from 1:1 to 10 8:1 by device frequency meter PCH3-07-0002 electronic counter; counting number of electrical signals from 0.1 Hz to 125MHz; voltage quartz frequency issuing by device frequency meter PCH3-07-0002 electronic counter; input signal frequency dividing; coded signals measurement results issuance. Frequency meter PCH3-07-0002 electronic counter is designed for: sinusoidal frequency and pulse signals repeat rate measurements in the range from 0.1 Hz to 125MHz; sinusoidal period and sinusoidal signal following period measurements in the range from 0.1 mks to 1.0 4 s; time intervals and pulse durations measurements in the range from 0.1 mks up to 10 4 s; electrical signals frequency ratio measurements in range from 1:1 to 10 8:1 by device frequency meter PCH3-07-0002 electronic counter; counting number of electrical signals from 0.1 Hz to 125MHz; voltage quartz frequency issuing by device frequency meter PCH3-07-0002 electronic counter; input signal frequency dividing; coded signals measurement results issuance. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other et
$
3,465.45
Buy It Now
$240 Shipping
Condition: New – Open box
Location: Ukraine
High precision Measuring and switching remote control panel P-326-4 analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, ... moreAnritsu, Fluke and general Electric, but has the same or better characteristics. This device can be used for wide measurement range. Measuring and switching remote control panel P-326-4 together with measuring generator P-326-1. And universal level meter P-326-2 are designed for measurement of communication lines, channels and systems paths with frequency division when they are set up, operation and maintenance in frequency range 0.2 kHz- 2100 kHz. With the help of measuring and switching remote control panel measuring the following parameters is provided: Working attenuation and amplification of symmetric and asymmetric to"ground" four-plus; Crosstalk attenuation; Return loss; Damping asymmetry. The device is designed for installation and operation in car bodies. Can be used in factory and laboratory conditions. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices Measuring and switching remote control panel P-326-4: Device provides operation at temperatures range of- 10 º C to +50 ° C, under conditions of high humidity up to 98% at 35 ° C, as well as frost and dew impact. Operating frequency range of measuring and switching remote control panel P-326-4: a) objects with input and output resistance 600 Ohm- from 0.2 kHz to 150 kHz; b) objects with input and output resistances 135 Ohm. 150 Ohm- from 4 kHz to 620 kHz; c) objects with input and output resistance 75 Ohm- from 60
$
1,950
Buy It Now
$215 Shipping
Condition: New – Open box
Location: Ukraine
Frequency meter CH3-64 electronic counter analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general ... moreElectric, but has the same or better characteristics. This device can be used for wide measurement range. Frequency meter CH3-64 electronic counter is universal device designed to provide continuous electrical signals frequency and period measurements. IM frequency signals carrier. Electrical signals frequency ratio by the number of oscillations. CH3-64 can operate with interchangeable blocks, which expands its measurement range and functionality. Time intervals interpolation measurement mode and signals period mode provide a high resolution of device. CH3-64 measurement results and remote control issuance is provided by KOP. Frequency meter can produce a mathematical processing of measurement results(change the scale and to shift) Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices frequency meter electronic counter CH3-64: Continuous signals frequency measurement range– 0.005 Hz-1000 MHz. 0.95 GHz- 12GHz(with interchangeable block YAZCH-168) IM signals carrier frequency measurement range- 100MHz-1000MHz. 0.95GHz-12GHz(with interchangeable block YAZCH-168) CH3-64 time intervals measurement range- 10 ns- 2∙10 4 s; Time intervals measurement resolution- 1 ns; Device CH3-64 produces the number of oscillations in the frequency range- 0.005 Hz-200 MHz; Power- 220V. 50Hz, 115V, 400Hz; Power consumption– 180 V ∙ A; Dimensions– 488x133x574mm; Weight CH3-64- 21kg. Warranty 12mounth. Delivery te
$
1,500
Buy It Now
$140 Shipping
Condition: New – Open box
Location: Ukraine
$
1,499
Buy It Now
$135 Shipping
Condition: New – Open box
Location: Ukraine
$
1,495
Buy It Now
$130 Shipping
Condition: New – Open box
Location: Ukraine
Frequency meter CH3-69 electronic counter analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general ... moreElectric, but has the same or better characteristics. This device can be used for wide measurement range. Frequency meter C H3-69 electronic counter i s designed to measure continuous sinusoidal signal frequency. Carrier frequency of IM and AM signals. Quartz frequency stress issue. Frequency range 8 GHz- 18 GHz. Input signal level 0.3 mWatt– 5mWatt. Frequency meter C H3-69 electronic counter is used to measure continuous sinusoidal signal frequency. Carrier frequency of IM and AM signals. Quartz frequency stress issue. Frequency meter C H3-69 electronic counter are used for setup, calibration and testing of various transceiver circuits. Filters, and microwave generators for setting up communication systems and other devices. Built-in microprocessor controller provides automatic harmonics number identification and direct frequency measured values ​​ calculation and display it on digital display. Frequency meter C H3-69 electronic counter. Which has a wide range of measured frequency, is small-sized device. Designed for operation in harsh using conditions. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices frequency meter electronic counter CH3-69: Frequency range 8 GHz- 18 GHz. Input signal level 0.3 mWatt– 5mWatt. Frequency measurement relative error δ ng = ±(δ о +2·10-7 +δ res) where δ о- frequency internal oscillator relative error or internal source is used instead of genera
$
267.02
Buy It Now
$0 Shipping
Condition: New
Location: China
DY4300A 4-Terminal Earth Ground Resistance and Soil Resistivity Tester Features: 4 pole earth resistance measurement 0 to 20.99kΩ with min. resolution ... more0.01Ω Auto ranging soil resistivity measurement 0 to 395.6kΩm Series interference voltage Ust(AC only) 0~30Vrms Measures frequency 400~500Hz Measureing Voltage Um optional/auto-selected 10Vrms 94Hz. 105Hz, 111Hz, 128Hz Test current maximum 80mA Advance filtering method based on FFT(fast fourier transform) reduces noise interference Compensation for residual resistance Rk Data Memory 1000 sets Conforms to CATIV 150V. CATIII 300V SKU: X1IN10086 Package includes: 1* DY4300A Earth Ground Resistance Tester 1* Carry Case Specifications, Range, DY4300, DY4300A, DY4300B, Earth Resistance, 0.05-2.099Ω, ±(3%rdg±5gdt) 0.01Ω, ±(3%rdg±5gdt) 0.01Ω, ±(3%rdg±0.03Ω) 0.05-20.99Ω, 0.1Ω, 0.1Ω, ±(3%rdg±5gdt)1) 0.01Ω, 0.3-209.9Ω, 1Ω, 1Ω, 0.1Ω, 3-2099Ω, 10Ω, 10Ω, 1Ω, 0.03k-20.99kΩ, 100Ω, 100Ω, 10Ω, 0.03k-209.9kΩ, N/A, N/A, 100Ω, Auxiliary earth resistance Rh. Rs, 8% of Re+Rh+Rs, Soil Resistivity ρ=2*n*a*Rg(2) 0.2-395.6Ωm, 0.1Ωm-1Ωm autoranging, 0.1Ωm-1Ωm autoranging, 0.1Ωm-1Ωm autoranging, 0.2-3956Ωm, 20-39.56Ωm, 0.2k-395.6Ωm, 2.0k-1999kΩm, N/A, N/A, N/A, Series Interference Voltage Ust(A.C only) 3) 0-30Vrms, N/A, ±2%rdg±2gdt(50/60Hz) ±3%rdg±2gdt(40/500Hz) 0.1V, N/A, 0-50.9Vrms, N/A, N/A, ±2%rdg±2gdt(50/60Hz) ±3%rdg±2gdt(40/500Hz) 0.1V, Frequency, 400Hz-500Hz, N/A, ±1%rdg±2gdt 0.5Hz, ±1%rdg±2gdt 0.5Hz, Double clamp-on measurement for earth resistance, 0.05-140Ω, N/A, N/A, N/A, Measuring Current Im, maximum 80mA, Measuring Current Um, 10Vrms 125Hz, maximum 10Vrms 94Hz. 105Hz, 111Hz, 128Hz, Memory capacity, 1000, Overload Protection, between E-S(P) and between E-H© terminal AC280V/10 sec. Withstand Voltage, between the electrical circuit and enclosure AC3540V(50/60Hz)5 sec. LCD, Dot-matrix 192x64 monochrome, Safety Category, IEC 61010-1 CAT.III 300V. CAT.IV 150V Pollution degree 2, IEC
$
333
Buy It Now
$55 Shipping
Condition: New – Open box
Location: Ukraine
Wattvarmeter D5031 analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. For sake is 1 of 4 wattvarmeter s for your coice! Please see the table. Wattvarmeter D5031 is designed to measure active power in three-phase AC wire circuits at phase and non-phase loads. As well as to measure reactive power in three-phase AC wire circuits at symmetric voltage and phases load with unevenness of not more than 5% Wattvarmeter D5031 accuracy class: 0.5- for measuring active and reactive power modes in frequency range 45- 65 Hz; 1- for active power measurement mode in frequency range over 65 to 1100 Hz. Nominal current: 1A or 5A. Nominal voltage: 100V. 250V, 375V. Wattvarmeters D5031 are designed to measure active power in three-phase AC wire circuits at phase and non-phase loads. As well as to measure reactive power in three-phase AC wire circuits at symmetric voltage and phases load with unevenness of not more than 5% Wattvarmeter D5031 is designed to be used in moderate climate conditions in dry heated rooms at an ambient temperature of 10 ° to 35 ° C and relative humidity up to 80% at 25 ° C) Wattvarmeter D5031T4.1- tropical version. Designed to be used dry and humid tropical climate with an ambient temperature from 1 ° to 45 ° C and relative humidity up to 80% at 25 ° C) It is acceptable to use device in dry tropical climate(TC version, category 4.2 according to GOST 15150-69) Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try t
$
350
Buy It Now
$100 Shipping
Condition: New – Open box
Location: Ukraine
$
23.02
Buy It Now
$0.4 Shipping
Condition: New
Location: China
$
70
Buy It Now
$20 Shipping
Condition: Used
Location: Chatsworth,CA,USA
$
500
Buy It Now
$90 Shipping
Condition: New – Open box
Location: Ukraine
Wattmeter D5056 analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the same ... moreor better characteristics. This device can be used for wide measurement range. For sake is 1 of 4 wattvarmeter s for your coice! Please see the table. Wattmeter D5056 Is designed for accurate power measurement in AC and DC. Nominal current: 0.1 A. 0.2 A. 0.5A, 1A. 2.5 A. 5A. 10A, Nominal voltage: 30V. 75V, 150V, 300V, 450V, 600V Accuracy class 0.1 Wattmeters D5056 are designed for accurate power measurement in AC and DC. Wattmeter D5056 is designed for use in a temperate climate in dry heated rooms at an ambient temperature from 10 ° to 35 ° C and relative humidity up to 80% at 25 ° C; Wattmeter D5056-04.1- version 0. Category 4.1 is designed for use in dry and humid tropical climate in closed air-conditioned or partially air-conditioned rooms at an ambient temperature from 1 ° to 45 ° C and relative humidity up to 80% at 25 ° C(according to GOST 15150) Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices Wattvarmeter D5056: Wattmeter D5056 accuracy class is 0.1 in accordance with GOST 8476 immediately after setting operating mode and during any continuous operation time. Basic parameters of devices D5056 are shown in table. Nominal power coefficient is 1.0. Nominal current of parallel circuit is 5 mA. Wattmeter normal frequencies range is from 45 to 65 Hz. Operating range is over 65 to 500 Hz. Acceptable additional error limit of device D5056. Caused by frequency deviation from t
$
633
Buy It Now
$90 Shipping
Condition: Used
Location: Ukraine
High precision Pulse oscilloscope calibrator I1-9 analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and ... moregeneral Electric, but has the same or better characteristics. This device can be used for wide measurement range. Is designed for oscilloscopes testing and calibration with 100 MHz bandwidth. Signal form- positive polarity rectangular pulses Amplitude 30* 10-6-100 V with discrete setting Uk =(lm* 10n)V. Where l = 3. 4, 5, 6, 8, 10; n =-5, 4-3, 2, 1, 0 Calibration setting mode error(at load 1 MOhm) ± 2.5* 10-3 Uk 3 mkV Pulse oscilloscope calibrator I1-9 is designed for oscilloscopes testing and calibration with 100 MHz bandwidth(variations coefficient and transient response channels of vertical deviation) Calibrator can be used to improve accuracy and reliability of metrological oscilloscope measurements. Calibrator meets requirements of GOST 22261-82. Devise pulse oscilloscope calibrator I1-9 using conditions: Ambient temperature in operating conditions of 278 to 313 K(of 5 to 40 ° C) Ambient temperature in extreme conditions of 223 to 333 K(of-50 to +60 ° C) Relative humidity up to 95% at 303 K(30 ° C) Voltage supply(220 ± 22)V. Frequency(50 ± 0.5) Hz, 115 ± 5.75) and(220 ± 11) V, frequency(400 ± 10) Hz. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of devices Calibrators I1-9: Pulse oscilloscope calibrator I1-9 shows calibration signal coefficient deviation oscilloscope vertical position channel of the following types: rectangular pulses( square wave" positive pol
$
60
Buy It Now
$9 Shipping
Condition: Used
Location: Chatsworth,CA,USA
$
100.14
Buy It Now
$2.73 Shipping
Condition: New
Location: China
$
58.12
Buy It Now
$0 Shipping
Condition: New
Location: China
1 2 3 4 5 6 7 8 9 10 11 12 13 14
 In