|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: Used Location: Montgomeryville, United States BLDC Controller Brushless Servo DC Motor Drive PB510 DC18V-50V Stock #K-171730 DAY RIGHT TO RETURN (FREE RETURNS DOMESTICALLY)AUTHENTICITY GUARANTEED!WE ... moreSOURCE OUR PRODUCTS FROM CLOSED LOCATIONS AND OTHER TRUSTED SOURCES.
Buy It Now
$6.91 Shipping Condition: Used Location: Lumberton, United States Harmonic Drive A1871 Hi-T Drive DC Servo Actuator RH-14B-3002-E100DO-V1-SPA1871. Condition is Used. Shipped with USPS Priority Mail.
Buy It Now
Free Shipping Condition: Used Location: Santa Clara, United States Fast shipping from the USA, eBay seller since 1999 Hundreds of satisfied buyers 100% Positive feedback, GECKODRIVE, G320X DC SERVODRIVE Servo Motor Drive, ... moreMade in USA! GECKODRIVE G320X DC SERVODRIVE Servo Motor Drive recently purchased new directly from gecko and powered up for only a few hours before being replaced with a voltage controlled drive for greater speed. Legendary performance and reliability. Has some light marks at the screw holes and a bit of heatsink compound in the dimples. Otherwise guaranteed 100% tested and working. No manual included but it's available at the link below. Specs and More Info: User Manual: Flat Rate shipping via USPS FIRST CLASS Package including FREE Tracking and Delivery Confirmation is only $3.00. Priority Mail shipping is available for $5.95 If you have any other questions. Just click the'Ask a question' link below. We'd be glad to help! PLEASE READ THESE TERMS BEFORE BIDDING SHIPPING, Buyer pays only $3.00 for fast U.S. Postal Service FIRST CLASS Package shipping to anywhere in the U.S.A. PRIORITY MAIL shipping in a small flat rate box is available for $5.95. Sorry World. U.S.A. shipping only on this item. Most items ship the next business day after payment is received. PayPal purchases must be shipped to PayPal provided"Confirmed" shipping addresses only. Additional items may be combined to save you money on shipping whenever possible. Provided that they are shipped in the same box and paid for in the same eBay checkout transaction. Most combined shipping discounts are calculated automatically at checkout. If not, please request a revised invoice BEFORE paying. PAYMENT, You can pay online instantly using your VISA. MasterCard, DISCOVER, or American Express card at. It's fast. Free, secure, and your item will usually ship the next business day(eCheck payments may require several business days to clear before your item is shipped) To protect you against fraudulent use of your identity, PayPal purchases must be shipped to your PayPal"CONFIRM
Buy It Now
Free Shipping Condition: New – Open box Location: New Richmond, United States Copley Controls model 120/121 DC Servo Amp voltage clamp regen resistor
Buy It Now
Free Shipping Condition: Used Location: San Diego, United States Parker ViX 250 Servo Drive VIX250.
Buy It Now
$10.34 Shipping Condition: New – Open box Location: Miami, United States I’ve never needed them. The price is per drive. Select the qty you desire.
Buy It Now
$6.78 Shipping Condition: New Location: Lumberton, United States
Buy It Now
$7.00 Shipping Condition: Used Location: Hayward, United States
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Servo Type. Rotor inertia (× 10-4kg. Encoder Resolution (Servo Drive Resolution). AC SERVO Drive. Pulse + Direction, A phase + B phase, CCW pulse + CW ... morepulse. Motor Specification. Electronic Commutation Motor. ).
Buy It Now
Free Shipping Condition: Used Location: South Korea REPAIR, MRO, MAINTENANCE. Warranty Policy.
Buy It Now
Free Shipping Condition: Used Location: South Korea REPAIR, MRO, MAINTENANCE. Warranty Policy.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Delta 1.5KW 220V AC Servo Motor Driver ECM-B3M-E21315RS1+ASD-B3-1521-L 2000RPM. Specifications of the ASDA-B3 servo drive. Pulse input. Rotor inertia ... more(x10 -4kg.m2) (with brake). Rotor inertia (x10 -4kg.m2).
Buy It Now
Free Shipping Condition: Used Location: South Korea REPAIR, MRO, MAINTENANCE. Warranty Policy.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States Servo Drive. We believe that communication fosters good cooperation. A06B-6111-H015#H550.
Buy It Now
Free Shipping Condition: New Location: United States This depends on the warehouse's schedule.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China Servo Drive. Allen Bradley 2094-BM02-M. Current Type. We take our reputation serio usly. Can we get a wholesale price ?. We will reply you in 24 hours ... moreand give your a satified answer. Feed b a ck .
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China 1 400W AC servo Motor. 1 400W AC Servo Drive. Servo Type. 1 3M Encoder Cable & Power Cable. AC SERVO Drive. Pulse + Direction, A phase + B phase, CCW ... morepulse + CW pulse. thrust shaft load (N). 1 Motor Specifications.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China 1 200W AC servo Motor. 1 200W AC Servo Drive. Servo Type. Motor+Drive: ECMA-C20602RS+ASD-B2-0221-B. AC SERVO Drive. Pulse + Direction, A phase + B phase, ... moreCCW pulse + CW pulse. thrust shaft load (N).
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China ECMA-C10807RS+ASD-A2-0721-L Delta 220V 750W 2.39NM 3000r/min 80mm AC Servo Motor Drive kits with 3M cable. Servo Type. Rotor inertia (× 10-4kg. Encoder ... moreResolution (Servo Drive Resolution). AC SERVO Drive. ).
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China ((ms) (with brake). 2 ) (with brake). (with brake). Weight (kg) (with brake). Weight (kg) (without brake). Insulation strength. >100MΩ, DC 500V. Insulation ... moreresistance.
Buy It Now
Free Shipping Condition: New Location: 福田区, China
Buy It Now
$115.00 Shipping Condition: New Location: 龙岗区, China Stepper Motor. Delta 1.5kw AC Servo Drive & Motor ASD-B2-1521-B + ECMA-E21315SS with Cable New. Servo Drive and Servo Motor Combinations. 1 1.5KW AC servo ... moreMotor. 1 1.5KW AC Servo Drive. Servo Drive.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China ECMA-C20602SS+ASD-B2-0221-B Delta 220V 200W 0.64NM 3000RPM 60mm AC Servo Motor Drive kits Oil Seal brake with 3M cable. 1 200W AC servo Motor. 1 200W ... moreAC Servo Drive. Servo Type. Motor+Drive: ECMA-C20602SS+ASD-B2-0221-B.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Servo Type. Rotor inertia (× 10-4kg. Encoder Resolution (Servo Drive Resolution). AC SERVO Drive. Pulse + Direction, A phase + B phase, CCW pulse + CW ... morepulse. Motor Specification. Electronic Commutation Motor. ).
Buy It Now
Free Shipping Condition: New Location: 福田区, China
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China CNC Delta 400W Servo Motor Driver Kit 220V Brake ECMA-C20604SS+ASD-B2-0421-B. 1 x 400W AC servo Motor. 1 x 400W AC Servo Drive. Servo Motor Specification ... moreServo Type. AC SERVO Drive. Support Modbus communication protocol(communication port: RS-485 / RS-422 / RS-232).
Buy It Now
$50.00 Shipping Condition: Used Location: South Korea REPAIR, MRO, MAINTENANCE. Warranty Policy.
Buy It Now
Free Shipping Condition: New Location: United States Delta 400W 0.4KW B2 Series Servo System(Drive + Motor) ASD-B2-0421-B + ECMA-C20604RS New Features* High-resolution encoder with 17-bit(160.000 p/rev) ... moreis equipped as a standard feature which satisfies the application needs of high precision positioning control and stable rotation at low speed. Satisfy High Precision Positioning Requirements*Offer Easy-To-Install Solution for Simple Start-Up*Reduce Maintenance and Wiring Cost for Versatile Operation Servo Drive and Servo Motor Combinations Power Servo Drive Servo Motor 100W ASD-B2-0121-B ECMA-C20401_ S( S=8mm) 200W ASD-B2-0221-B ECMA-C20602_ S( S=14mm) 400W ASD-B2-0421-B ECMA-C20604_ S(S=14mm) ECMA-CM0604_ S(S=14mm) ECMA-C20804_ 7(7=14mm) ECMA-E21305_ S(S=22mm) ECMA-G21303_ S(S=22mm) 750W ASD-B2-0721-B ECMA-C20807_ S(S=19mm) ECMA-C20907_ S(S=16mm) ECMA-G21306_ S(S=22mm) ECMA-GM1306_ S(S=22mm) 1000W ASD-B2-1021-B ECMA-C21010_ S(S=22mm) ECMA-C20910_ S(S=16mm) ECMA-E21310_ S(S=22mm) ECMA-G21309_ S(S=22mm) ECMA-GM1309_ S(S=22mm) 1500W ASD-B2-1521-B ECMA-E21315_ S(S=22mm) 2000W ASD-B2-2023-B ECMA-C21020_ S(S=22mm) ECMA-E21320_ S(S=22mm) ECMA-E21820_ S(S=35mm) 3000W ASD-B2-3023-B ECMA-E21830_ S(S=35mm) ECMA-F21830_ S(S=35mm) Specifications Model: ASDA-B2 Series 100W 200W 400W 750W 1 KW 1.5 KW 2 KW 3 KW 01 02 04 07 10 15 20 30 Power Supply Phase/ Voltage Three-phase: 170 ~ 255VAC. 50/ 60Hz +/ 5% Single-phase: 200 ~ 255VAC. 50/ 60Hz +/ 5% Three-phase: 170 ~ 255VAC, 50/ 60Hz +/ 5% Continuous Output Current(Arms) 0.9 1.55 2.6 5.1 7.3 8.3 13.4 19.4 Cooling System Natural Air Circulation Fan Cooling Encoder Resolution/ Feedback Resolution 17-bit(160000 p/rev) Control of Main Circuit SVPWM Control Tuning Modes Auto/ Manual Dynamic Brake- Built-in Speed Control Mode Analog Input Command Voltage Range 0 ~ +/10 VDC Input Resistance 10KΩ Time Constant 2.2μs Speed Control Range Torque Control Mode Analog Input Command Voltage Range 0 ~ +/10 VDC Input Resistance 10KΩ Time Constant 2.2μs Communication Interface RS-232/
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China Fanuc A06B-6114-H209. Servo Amplifier. Country/Region of Manufacture. PLC Professional Automation. We believe that communication fosters good cooperation.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China Servo Drive. Allen Bradley 2094-BM02-M. Feed b a ck We take our reputation serio usly. We will reply you in 24 hours and give your a satified answer. ... moreCurrent Type. Can we get a wholesale price ?.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China We believe that communication fosters good cooperation.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China Hope to understand. We will mark the new and old condition of the product on the product title. We believe that communication fosters good cooperation. ... moreALLEN BRADLEY.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China 220V 4.5KW CNC AC Servo Motor Drive Kits System 180mm28.650NM 3M Cable. 1 4.5KW AC servo Motor. 1 4.5KW AC Servo Drive. Servo Type. Rotor inertia (× 10-4kg. ... moreMotor + Drive : ECMA-F11845RS+ASD-A2-4523-L. ).
Buy It Now
Free Shipping Condition: Used Location: Ventura, United States MPN: 250521. We're down to earth, easy to work with people. Fast Dispatch Service.
Buy It Now
$15.45 Shipping Condition: Used Location: Kawkawlin, United States Item is sold as pictured. These services include.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China ECMA-E11315RS+ASD-A2-1521-M Delta 220V 1.5kW 7.16NM 2000r/min 130mm AC Servo Motor Drive kit Keyway with 3M Cable. Servo Type. Motor+ Drive: ECMA-E11315RS+ASD-A2-1521-M. ... moreAC SERVO Drive. Encoder Resolution (Servo Drive Resolution).
Buy It Now
Free Shipping Condition: Used Location: Glendale, United States The drive operates on DC power.
Buy It Now
Free Shipping Condition: New – Open box Location: Georgetown, United States 193764 New-No Box; Intecno BLDC-65-7-XXX Brushless & DC Servo Drive; 7/14; 20-84; Type I. Item is New; unused; no factory packaging. Austin Surplus SKU: ... more193764 Location: GRG-R10-P11-S02-0005250
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China ·How do I ca ncel an order?. If the order has not been dispatched, we will just cancel the order. However, if it's because you changed your mind and no ... morelonger seem to like what you ordered, then we kindly ask you to bear the costs.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China 1 1KW AC servo Motor. 1 1KW AC Servo Drive. Servo Type. Motor+Drive:ECMA-C21010RS+ASD-B2-1021-B. AC SERVO Drive. Pulse + Direction, A phase + B phase, ... moreCCW pulse + CW pulse. thrust shaft load (N). 1 Motor Specifications.
Buy It Now
Free Shipping Condition: Used Location: Gurnee, United States
Buy It Now
Free Shipping Condition: New Location: Rancho Cordova, United States New, on hand and ready to ship!.
Buy It Now
$14.78 Shipping Condition: Used Location: Manchester, United States Servo Amplifier, DC, Brush.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China ECMA-C11010RS+ASD-A2-1021-M Delta AC Servo Motor Drive kits 220V 1kW 3.18NM 3000r/min 100mm NEMA40 Keyway. Servo Type. Rotor inertia (× 10-4kg. Motor+ ... moreDrive: ECMA-C11010RS+ASD-A2-1021-M. Encoder Resolution (Servo Drive Resolution). ).
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Delta 3.18NM 1KW CNC AC Servo Motor Servo Drives Amplifiers Kit 3000RPM 5M Cable. ECMA-C11010RS+ASD-A2-1021-L Delta 220V 1kW 3.18NM 3000r/min 100mm AC ... moreServo Motor Drive kit Keyway with 5M Cable. Stepper Motor Drive System.
Buy It Now
Free Shipping Condition: New Location: China Serial Bus Servo Drive Board. ST3215-HS Servo Motor. ST3215 Servo. ST3025 Servo. ST3020 Servo. SC09 Servo. SC15 Servo. Bus Servo Adapter (A) x1.
Buy It Now
Free Shipping Condition: Used Location: South Korea REPAIR, MRO, MAINTENANCE. Warranty Policy.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Stepper Motor. 1 1.5KW AC servo Motor. 1 1.5KW AC Servo Drive. Servo Type. 1 3M Encoder Cable &Power Cable. Handheld Inkjet Printer. 3D Printer. Rosin ... moreHeat Press Machine.
Buy It Now
$63.00 Shipping Condition: New Location: 龙岗区, China 1 400W AC servo Motor. 1 400W AC Servo Drive. Servo Type. AC SERVO Drive. AC 1500V, 60 sec. Line driver: Max. Communication Interface. 20% to 90% RH (non-condensing).
Buy It Now
$35.00 Shipping Condition: Used Location: North Billerica, United States CSR Contraves NC421 NC400 DC Servo Controller @FAA1521. No way of testing so selling as is used untested.
Buy It Now
$20.00 Shipping Condition: Used Location: Clio, United States Dc-Servo Driver Bn 6508 Bn 6508.1014.
Buy It Now
Free Shipping Condition: Used Location: Rancho Cordova, United States Item was recently removed from working service and is in excellent working order. Item will come with a 30 Day Warranty. Cosmetically in good condition ... moreshowing minor scuffs / scratches / blemishes from previous use. Includes Stepper Servo Drive as pictured. No additional items or accessories are included. Pictures are of one of the actual units available. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have..
Buy It Now
$12.45 Shipping Condition: New Location: Sunnyvale, United States These use 20-80VDC unregulated power as an input.
Buy It Now
$10.51 Shipping Condition: Used Location: Buffalo, United States This drive, as with all servo drives, needs to have jumpers set up to match your old drive, and the pots adjusted to match your old drive. THIS VERSION ... moreOF THE DRIVE HAS ONE LED THAT FLASHES BASED ON FAULT.
Buy It Now
$14.50 Shipping Condition: Used Location: Middlesex, United States 1 Axis DC Servo Unit with PLC used in good working order
Buy It Now
Free Shipping Condition: Used Location: Linwood, United States Servo Driver Board. This is a used unit.
Buy It Now
$20.00 Shipping Condition: New – Open box Location: Gilbert, United States The S70602-NANANA is manufactured by Kollmorgen as part of their S700 Servo Drive Series. These drives feature a Rated line power for S1 operation of ... more4.5 kVA and a Peak output current of 18 A RMS.
Buy It Now
$14.68 Shipping Condition: Used Location: Macon, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Keyport, United States UP FOR SALE Reliance Electric Electro-Craft MAX-430 Brushed DC Servo Drive. OPEN BOX FREE SHIPPING THANK YOU
|
|
|
|
DC Servo Snowboard Jacket Red Plaid - Mens
This jacket is nearly perfect. Wore one season in 2010 a handful of times. Retails for $174.95. Payment due within one business day. No returns. No international shipping. PayPal only. Serious bidders only.
|
|
|
AE Techron Crown 7570 1000W Audio Power Amplifier DC-45kHz Shaker Table Servo
RDR ELECTRONICS WILL ONLY SHIP TO U.S. ADDRESSES. FOREIGN BIDDERS WILL BE APPROVED TO BID ONLY AFTER PROVIDING A U.S. SHIPPING ADDRESS! Auction consisting of: 1- AE Techron Crown 7570 1000W Audio Amplifier DC-45kHz Only what is listed above and/or shown in the pictures below are included in this auction. This auction is for a very nice(and very heavy) 1000 watt amplifier that covers DC to 45kHz. The Techron 7570 is based on the Crown M600 design. This is a monster power amplifier. There are two 1kW transformers in the power supply alone. Unit uses an H-bridge topology, with eight transistors in each arm of the H. There is all kinds of protection circuitry built into the amplifier so that it is hard to destroy this amp even under adverse conditions. Unit is also has a very flat frequency response and very low distortion. There is a plug-in ... moreinput module with attenuator. It can also be switched to operate in constant voltage(CV) or constant current(CC) mode. Amplifier can also be operated in parallel or bridged with other amplifiers of the same type(input module has been strapped for BNC as main input, terminal strip for auxiliary input) Great amplifier for high end audio applications, shake tables, DC servo applications, and more. For more detailed information we have provided this link to the website. It is a beast. This unit weighs 96 pounds. Item will be sandwiched between two 3/4" plywood panels for safe shipment(which adds another 20 pounds) Used unit in good physical and electrical condition. We have powered this unit up and tested it with a load. Looks like it is a good working item. This item is being sold with a 30-day warranty. Check the shipping calculator for S/H cost to your ZIP code. Item will be insured for the bid amount. To view all of our current E-bay auctions click on our RDR-Electronics Items for Sale Page link below! Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a mo
|
|
|
DC Servo Motor Dynetic 220014A
DC Servo Motor Dynetic 220014A Information. 44V 2.8A Used pull taken from an Iris Graphics printer. What you get. In this auction you get the motor only. Shipping and Payments. Payments We accept Mastercard. Visa, American Express, and Paypal for immediate shipment. Packaging and shipping Please add $12.35 shipping and packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Servo CO. DC BRUSHLESS SILENT FAN SKLD12B4S-901 DC12V 0.28A 3.5W
USED DC BRUSHLESS SILENT FAN SKLD12B4S-901 DC12V 0.28A 3.5W. USED Guarantee against DOA
|
|
|
Technics AutomaticTurntable DC Servo Model SL BD25
Up for sale is a nice Technics Automatic turntable model SL BD25. Has needle. Tested. Works great. Thank you for viewing this item. If you have any questions.Please email us. We have many more items. Please take a moment and visit our ebay store, Outshelf for more bargains and unique items. Also check us out on Esty. Payment: Buyers are given no more then 7 days to complete transaction. Afterward. A ebay case will be issued requesting cancellation of transaction. So, item can be resubmitted. Shipping: We ship within 5 business days of receiving fund for item. No weekends. All packages are packaged carefully to guard against damage. We also do combine shipping for certain small items. The State of Hawaii.Alaska and Puerto Rico should request ship Rates before bidding. Refunds: We offer refunds for returned items up to 14 days of receiving ... moreitem. Unless ad stated otherwise. Postage returns is the responsibility of the buyer. Also a case will be issued from ebay to cancel transaction. Feed backs: If your item is damage. not as describe” defective or not deliver in prescribe time, Please contact us through ebay and give us chance to address the problem before leaving your feed back. If you are satisfied with your item please take a moment leaves a positive feed back. Item Cancellation: all items are subject to cancellation that are under 24 hours and no bids have been submitted. 12/12
|
|
|
Technics DC Servo SL-BD 27 Automatic Turntable System
NEEDLE IS ALMOST NEW.GREAT SOUNDING TURNTABLE.TESTED.SPEED STEADY ON BOTH 33&45-Turntable not mint but still very good shape(minor scuffs.Scratches)STEREO- Auto Return-Arm lift&drop manual-TURNTABLE SYSTEM. 33&45. Belt DRIVEN TURNTABLE SYSTEM- IN WORKING CONDITION,Anti-Skate System.comes with shell, cartridge& needle-in great shape-1 hr,of play on it) Works.TESTED.All connecting wires(RCA&power)included Thank you for looking!Great sounding turntable.NO COVER. Made in Japan, WILL ship ASAP is paid for.Can be returned within 14 days.Buyers pays return shipping.
|
|
|
PIONEER P-51 -DC SERVO-DIRECT DRIVE TURNTABLE (VINTAGE) BEAUTIFUL!!!!!!
Up to Bid Or Buy A very Rare PIONEER P-51-DC SERVO-DIRECT DRIVE TURNTABLE(VINTAGE) BEAUTIFUL! THE DUSTCOVER.THE BASE CABINET.THE TONE ARM CONTROLS ARE IN NEAR MINT CONDITION.THE SMOKE TINTED DUSTCOVER IS PERFECT(LOOK AT PICS) IT PLAYS FLAWLESS.AND COMES WITH ORIGINAL 45 ADAPTER AND PATCH COR D! LOOK AT PICTURES OF THIS BEAUTIFUL TURNTABLE AND BID WITH CONFIDENCE! WILL PACK WITH PRIDE N TAKE CARTRIDGE OFF AND P UT IN OWN BOX. GOOD LUCK N ROCK ON! o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13dca1fac53-0xf9-
|
|
|
Panasonic Sl-N15 DC SERVO AUTO Tt System. (TECHNICS SL3 equivalent)
This tt is in good condition for its age. Cueing button. Start- stop all work. The arm moves and goes to 1st track as it should. The turntable needs a new belt and perhaps some tweaking. The base does not spin. This is to be sold for parts or repair ONLY. Thank you! Posted with
|
|
|
Cassette Deck DC Servo Motor w/ Cog - Marked 2D310X - Fits Onkyo, Sony, NAD, Etc
Cassette Deck DC Servo Motor Model"2D3 10X" Serves functions such as door ejection. Etc. This unit was pulled from a fully-functional Onkyo Integra TA-RW909 cassette deck and is 100% guaranteed against DOA. If it doesn't work. You can send it back for a full refund. This motor also fits dozens of other Onkyo, Sony, NAD and other cassette decks, so please research compatibility before placing your bid. I am not responsible for compatibility issues, so please do proper research on your own accord.
|
|
|
FANUC 11M DC Servo Motor, A06B-0651-B212 #0006 (2500M), ** USED ** WARRANTY **
Title: FANUC 11M DC Servo Motor. A06B-0651-B212, Used Description: Our Internal Stock#D23-10(4-13-13 adw) You are about to purchase the following item: 1- FANUC 11M DC Servo Motor. A06B-0651-B212, Used Type# A06B-0651-B212#0006(2500 M) 11M DC Servo Motor Date: 85.10 No. B-511331 Torque Cont. Stall: 12 Nm Amp Cont. Stall: 12 A 165 V 1500 RPM Insulation Class H Excit Perm Magnet Amb. Temp. 40 degree C* THIS UNIT CAME OFF OF A HITACHI SEIKI HC-400 MACHINING CENTER! This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 day return privilege if found defective(freight prepaid by buyer) SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. ... moreBuyer is responsible for ALL shipping fees incurred. We ship worldwide at great rates! Send us a message if you have a question about shipping your item. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same day payment has cleared. All items are also available for pick up in person. Return Policy: Full 30 day return privilege. Unless item it marked“SOLD AS IS” For returns, freight must be pre-paid by the buyer. Customer satisfaction is our main goal. If you are unsatisfied with any item you purchase. LET US KNOW, and we will be willing to either replace it or reimburse you for the total cost of what you paid. Payment: PayPal is our preferred method of payment. If you have a question on payment options. Please feel free to call us
|
|
|
FADAL REFURBISHED MTR-0010, MTR0010 GLENTEK GM6000 DC SERVO MOTOR
FADAL MTR-0010 DC SERVO MOTOR. THIS MOTOR FIT FADLAMACHINING CENTERS. GLENTEK MANUFACTURERS THIS MOTOR UNDER THERE NUMBER GM6000.THIS MOTOR IS FULLY REFURBISHED AND COMES WITH A ONE YEAR WARRANTY.
|
|
|
Fanuc DC Servo Motor Model 10M Type A06B-0651-B511
Good working condition
|
|
|
HURCO DC SERVO MOTOR
This auction is for a dc servo motor from an 80's Hurco cnc.
|
|
|
Fanuc DC Servo Motor Series Operator's Manual B-51790E/01
Used Fanuc DC Servo Motor series operator's manual. B-51790E/01. There are a few finger prints on the pages, appears to be complete. NOTE: ALL MACHINERY IS SOLD AS IS. WHERE IS WITH NO WARRANTY OR GUARANTEE. ALL MACHINE SAFEGUARDING AND OSHA REQUIREMENTS ARE THE RESPONSIBILITY OF THE BUYER. WE DO NOT MODIFY OR ALTER ANY MERCHANDISE THAT WE BUY OR SELL. IF BUYER RESIDES IN PA 6% SALES TAX IS CHARGED UNLESS EXEMPT. ALL BUYERS(IN AND OUT-OF-STATE) PICKING UP ITEM(S) MUST PAY STATE SALES TAX(STATE LAW) International shipping is available for some areas. Please contact us for shipping cost. Import duties. Taxes, etc. are the responsibility of the buyer. ITEM LOCATION: VALLEY VIEW. PA 17983(SCHUYLKILL COUNTY)
|
|
|
SEM Anilam Heidenhan 30R4-33 DC Servo tachometer 9.5V/1000
Tachometer as removed from an SEM 30R4-33 DC servo motor as pulled from a bridgeport CNC mill with Anilam control. Motor plate said 9.5V/1000 RPM. Includes stator. Brush board& wires, spacer shim& snap ring. May fit other motors or models but I'm not the person to ask. Removed from a working setup but my drive doesn't need a tach input. Sold as-is, free shipping to lower 48, actual shipping anywhere else, I take paypal and Dwolla. Thanks for bidding!
|
|
|
PORTER ELECTRIC - MAGNA PERMANENT MAGNET DC SERVO MOTOR (414.00)
Be sure to add me to your! MAGNA PERMANENT MAGNET D.C. SERVO MOTOR DESCRIPTION MANUFACTURER: PORTER ELECTRIC" MFG. PART# DPM.56P F 4 MODEL# 1-8-1-18-0100-0 VOLT: 133.4 ~ AMP: 183 ~ RPM: 2000 WIDTH: 7.5" ~ LENGHT: 16.75" ~ HEIGHT: 10" SHAFT DIA. 1" ~ LENGTH: 2.5" WEIGHT: 71 LBS. ENCL- B.C. DUTY-CONT INS. CL- F; TORQUE- 260 LBS. IN. RPM- 0-2000 JA-LB. IN. SEC.2- 0.190; TACH- 31.5; VOLTS/ 1000 RPM DATA SHEET- K- 7712; SPEC. 1EC 34-1(1969) to view larger image click on photos) CONDITION: USED/ REFURBISHED To view additional items that we have for sale CLICK to visit my EBAY STORE. Our Company purchases. Sells and retrofits"Cincinnati" machine tools. The following is a list of machines we retrofit and have spare parts for: 20H2500, 20H1000, 5H-100, V-40, H-40, 10V& 10VC1000. 1250, CONTROL PARTS IN STOCK ... moreFOR: Acramatic 220" 225(V) 228(VIII) Big Blue CNC 2.0& 2.1, MCV2.0& 2.1, Dynapath" Autocon" PAYMENT: Paypal, Payment is expected within 7 Days of Close of Auction. Please note- Unless reasonably stated. That payment is late for a specific reason, our only recourse is to leave Negative Feedback. SHIPPING& HANDLING: All Items under 150 Lbs will be shipped via"United Parcel Service" UPS) Ground. Items above 150 Lbs will need to be shipped via freight Carrier. Freightquote is our preferred carrier. They give us great rates and friendly service. Contact"Tony" 800) 323-5441. Ext. 1383 for his expert service! He will be able to offer you an estimate on shipping charges. Depending on where the items are being shipped, the charges may be different in special cases, for instance, shipping to a residence will assess an extra charge, or if a lift gate is required. Our company will be more than willing to get the quoted prices for you. INSURANCE: United Parcel Service" UPS) has insurance available for shipments. First $100 of Insurance is Free. Any additional insurance determined to be necessary(depending on fragility or item value) By s
|
|
|
Fanuc DC Servo Motor Model 5M, A06B-0642-B011 Reman. 10-2011
FANUC 5M servo motor A06B-0642-B011 This motor was removed from a Mori Seiki SL-3H with massive mechanical problems. I did run the machine before dismantling the control. Everything worked as it should. Got questions? Let me know. Rush shipping is available. Please inquire before paying. Posted with
|
|
|
Fanuc # 10M DC Servo Motor, A06B-0851-B005, 165 V, Used, Warranty
Title: Fanuc# 10M DC Servo Motor. A06B-0851-B005, 165 V, Used Description: Our Internal Stock# D23-3(2-8-13 dale) You are about to purchase the following item: 1- Fanuc# 10M DC Servo Motor. A06B-0851-B005, 165 V, Used Type# A06B-0851-B005# 10M DC Servo Motor Date: 84.10 No. M-428856 Torque Cont. Stall: 12 Nm Amp Cont. Stall: 12 A 165 V 1500 RPM Insulation Class H Excit Perm Magnet Tacho Volt 6V/krpm Amb. Temp. 40 degree C THIS UNIT CAME OFF OF A NAKAMURA-TOME SLANT 1 CNC TURNING CENTER. Type: S-1 Serial# C20704 w/ Fanuc 3T Controller Manudactured Approx. 1984 This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 day return privilege if found defective(freight prepaid by buyer) SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers ... morelocation; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. We ship worldwide at great rates! Send us a message if you have a question about shipping your item. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same day payment has cleared. All items are also available for pick up in person. Return Policy: Full 30 day return privilege. Unless item it marked“SOLD AS IS” For returns, freight must be pre-paid by the buyer. Customer satisfaction is our main goal. If you are unsatisfied with any item you purchase. LET US KNOW, and we will be willing to either replace it or reimburse you for the total cost of what you paid. Payment: PayPal is our preferred meth
|
|
|
FANUC DC SERVO MODEL 10 A06B-0651-B012 2000 P
FANUC DC SERVO MOTOR W FROZEN BEARINGS MODEL 10 A06B-0651-B012 W/ 2000 P NEEDS WORK( BEARING ARE NO GOOD NEED REPLACEMENT. ENCODER AND ARMMATURE ARE GOOD. To avoid shipping charges. We can ship directly to the customers FedEx or UPS account, when the customer provides us with the following information: Address, Phone number and their account number. Any question's. Feel free to contact Sam Nesh at(818) 888-2227 or via email at sam.nesh@sbcglobal.net On Dec-16-10 at 16:45:13 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. On Dec-16-10 at 16:45:15 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay ... moreApplication.
|
|
|
CONTROL TECHNIQUES MATADOR DC SERVO MOTOR DCM 2B 30/03 A2 1010102300001 USED
CONTROL TECHNIQUES MATADOR DC SERVO MOTOR DCM 2B 30/03 A2 1010102300001 USED 4038
|
|
|
Fanuc Mod# 20M DC Servo Motor, A06B-0652-B005, * * * USED * * * WARRANTY * * *
Title: Fanuc DC Servo Motor. A06B-0652-B005, Used Description: Our Internal Stock# 5-A6-1(3-23-13 dale) You are about to purchase the following item: 1- Fanuc DC Servo Motor. A06B-0652-B005, Used Type# A06B-0652-B005 S/N M-535736 Date: 85.9 Torque Cont. at Stall: 23 Nm Amp Cont at Stall: 18A 213 V 1500 RPM Excit Perm Magnet Insulation Class H Tacho Volt 6V/ krpm* THIS UNIT CAME OFF OF A MAZAK POWER CENTER SV-20! This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 day return privilege if found defective(freight prepaid by buyer) SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. ... moreWe ship worldwide at great rates! Send us a message if you have a question about shipping your item. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same day payment has cleared. All items are also available for pick up in person. Return Policy: Full 30 day return privilege. Unless item it marked“SOLD AS IS” For returns, freight must be pre-paid by the buyer. Customer satisfaction is our main goal. If you are unsatisfied with any item you purchase. LET US KNOW, and we will be willing to either replace it or reimburse you for the total cost of what you paid. Payment: PayPal is our preferred method of payment. If you have a question on payment options. Please feel free to call us. Contact Information: First Choice Industrial Service
|
|
|
Fanuc DC Servo Motor Type A0EB-0642-B011
Fanuc dc servo motor
|
|
|
FANUC 10M DC Servo Motor, A06B-0651-B211 (2000M), Used, Warranty
Title: FANUC 10M DC Servo Motor. A06B-0651-B211, Used Description: Our Internal Stock# 4-C6-9(3-15-13 dale) You are about to purchase the following item: 1- FANUC 10M DC Servo Motor. A06B-0651-B211, Used Type# A06B-0651-B211# 10M DC Servo Motor Date: 85.4 No. M-516853 Torque Cont. Stall: 12 Nm Amp Cont. Stall: 12 A 165 V 1500 RPM Insulation Class H Excit Perm Magnet Amb. Temp. 40 degree C SPECIAL NOTE: CAN'T READ THE ENTIRE TAG ON THE MOTOR. This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 day return privilege if found defective(freight prepaid by buyer) SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible ... morefor ALL shipping fees incurred. We ship worldwide at great rates! Send us a message if you have a question about shipping your item. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same day payment has cleared. All items are also available for pick up in person. Return Policy: Full 30 day return privilege. Unless item it marked“SOLD AS IS” For returns, freight must be pre-paid by the buyer. Customer satisfaction is our main goal. If you are unsatisfied with any item you purchase. LET US KNOW, and we will be willing to either replace it or reimburse you for the total cost of what you paid. Payment: PayPal is our preferred method of payment. If you have a question on payment options. Please feel free to call us. Contact Information: First Choice I
|
|
|
Peerless Porter Servo Motor PM DC 183-18-1026-0 Lodge Shipley
This item is one used Porter Peerless Servo Motor. Permanent Magnet DC 183-18-1026-0 pulled from a running Lodge& Shipley Lathe. I have several of these so the one you receive may different in appearance from the pics slightly. RPM 2500. Volts 143. Max arm amps 336. This info is from the data tag on the motor. Motor weighs 90lbs. The amplifier was rated for 40 amps at 120v. This item is sold as is. If you have any questions. Please call us. 281-259-5267 or Contact us now via email at sales@woodlandfp.com* Please read my terms prior to bidding. I accept the following payments within 7 days of the end of the auction- cash. Check, money order, credit card, wire transfer, or paypal. Checks and money orders will need to clear my bank prior to releasing the item for delivery/ shipping. Please contact me for more information about payments or ... moreto arrange other options. International customers must use wire transfer for payment, no paypal will be accepted for international sales. You may come by to pick up or inspect items during business hours. Monday- Friday. Texas residents will be charged sales tax of 8.25% of auction total. If you are a reseller then you will need to fill out a resale form and provide your tax ID. If item is for farm use then please state so at time of payment. Out of Texas residents will not be charged tax. THANKS for reading all this and happy EBAYING!
|
|
|
Kollmorgen PMI Servo Disc DC Motor Type S9M4H 00-S0967
Kollmorgen PMI Servo Disc DC Motor Type S9M4H 00-S0967 Used/Tested Working Kollmorgen Motion Technologies Group Servo Disc DC Motor Model 00-S0967-999 Type S9M4H/BRK/ENC DC Servo Motor With Brake And Encoder Peak Torque: 921 Oz-In Rated Continuous Torque: 85 Oz-In Rated Speed: 3000 RPM Maximum Recommended Speed: 6000 RPM Rated Power Output: 187 Watts Continuous Stall Torque: 85 Oz-In Volts: 34.0 Amps: 7.79 Dimensions: 4.37 Inches Diameter x 4.5 Inches Long(Not Including The Shaft) Shaft: 1/2 Inch Diameter x 1.25 Inches Long All Specs On This Motor Can Be Found On The Manufactures Web Site Take A Moment And Visit Our Ebay Store Please Read Terms and Conditions USA Sales Only All auctions must be paid for with in 10 Days of end of auction. All items are SOLD AS-IS Unless otherwise stated in the auction. All end of auction notifications will ... morebe sent to your registered Ebay email address. We will combine shipping on auctions if possible. However we may not combine shipping on auctions sold by different CTR Surplus sellers. If for some reason an item has to be returned to CTR Surplus the Buyer will have to pay the return shipping. The original shipping charges are not refundable. All returns are subject to a 20 percent restocking fee. For any return you must email CTR Surplus with in 3 days of receipt of the item. Please ask all questions before placing a bid. Most items will be shipped UPS Ground and automatically be insured for the bid amount. Any item that requires Truck Freight will require Buyers phone number and someone to unload the item from the truck(The Freight Company Will Not Unload The Truck) CTR Surplus 202 W. Livingston Ave Crestline Ohio 44827 Phone 419-683-3535 Fax 419-683-3230 All Auctions Will Be Automatically Insured For Final Bid Price Please click here to see my other auctions. 7.00% Sales Tax Will Be Charged On Item Price And Shipping On All Ohio Sales Powered by
|
|
|
FANUC DC SERVO UNIT MAINTENANCE MANUAL B-51401E-6/02
FANUC DC SERVO UNIT MAINTENANCE MANUAL(For Pulse Coder feedback) B-51401E-6/02 Used Manual book a bit dirty but in very good condition
|
|
|
Fanuc Model 10M DC Servo Motor, A06B-0651-B005, Used, WARRANTY
Title: Fanuc Model 10M DC Servo Motor. A06B-0651-B005, Used Description: Our Internal Stock# 3-E6-2(3-24-13 dale) You are about to purchase the following item: 1- Fanuc Model 10M DC Servo Motor. A06B-0651-B005, Used Type# A06B-0651-B005 Model 10M Date: 85.06 Torque Cont at Stall: 12 Nm Amp Cont. at Stall: 12 A 165 V 1500 RPM Excit Perm. Magnet Insulation Class H Tacho Volt 6V/Krpm Amb. temp. 40 degree C* THIS UNIT CAME OFF OF A MAZAK POWER CENTER SV-20! This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 day return privilege if found defective(freight prepaid by buyer) SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer ... moreis responsible for ALL shipping fees incurred. We ship worldwide at great rates! Send us a message if you have a question about shipping your item. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same day payment has cleared. All items are also available for pick up in person. Return Policy: Full 30 day return privilege. Unless item it marked“SOLD AS IS” For returns, freight must be pre-paid by the buyer. Customer satisfaction is our main goal. If you are unsatisfied with any item you purchase. LET US KNOW, and we will be willing to either replace it or reimburse you for the total cost of what you paid. Payment: PayPal is our preferred method of payment. If you have a question on payment options. Please feel free to call us. Contact Info
|
|
|
GETTY FANUC DC SERVO MODEL 20 A06B-0602-B025 TAC 6V
GETTY FANUC DC SERVO MODEL 20 A06B-0602-B025 TAC 6V GOOD CONDITION. To avoid shipping charges. We can ship directly to the customers FedEx or UPS account, when the customer provides us with the following information: Address, Phone number and their account number. Any question's. Feel free to contact Sam Nesh at(818) 888-2227 or via email at sam.nesh@sbcglobal.net On Dec-16-10 at 16:45:13 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. On Dec-16-10 at 16:45:15 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Kollmorgen PMI Servo Disc DC Motor Type S9M4H 00-S0970-05
Please Read Item Description& Our Terms and Conditions Below Before Bidding! Kollmorgen PMI Servo Disc DC Motor Type S9M4H 00-S0970-05 Tested Working Kollmorgen Motion Technologies Group Servo Disc DC Motor Model 00-S0970-05 Type S9M4H/BRK/M23 DC Servo Motor With Brake And Encoder Peak Torque: 921 Oz-In Rated Continuous Torque: 85 Oz-In Rated Speed: 3000 RPM Maximum Recommended Speed: 6000 RPM Rated Power Output: 187 Watts Continuous Stall Torque: 85 Oz-In Volts: 34.0 Amps: 7.79 Dimensions: 4.37 Inches Diameter x 4.5 Inches Long(Not Including The Shaft) Shaft: 1/4 Inch Diameter x 1.25 Inches Long Pulley Is Attached With Drift Pin All Specs On This Motor Can Be Found On The Manufactures Web Site The unit pictured has a hole in the case- see pics Other than what's displayed in the images accompanying this listing or mentioned in the ... moredescription above. There are no manuals, instructions, additional parts or accessories. Take A Moment And Visit Our Ebay Store USA Sales Only Since we deal in surplus our auctions do NOT fall into eBay's black and white idea of Used and Not Working item categories. Some items we can only partially test because we don't have all of the item parts or know how to fully test. But it does not mean they don't work. We list our auctions as well as we can, so please bid accordingly. CTR Surplus Listing Terms All items are SOLD AS-IS Unless otherwise stated in the auction. Some exceptions: Auctions stated Tested-Working and New(NOT New- Old Stock) will be refunded if the item(s) has a problem(as in- not working properly or at all) But the item must be returned at the Buyer's cost, and we must be contacted within 14 days of delivery. The item must be what we sold 100% serial numbers, model numbers, all included parts from the auction, size, shape, color, what was pictured/mentioned, etc. Also shipping from the auction is not refunded. All auctions must be paid for with in 10 Days of end of auction and all end of auction notifications will be sent to your registered Ebay em
|
|
|
Technics DC Servo Automatic Turntable system SL-B270
This is a nice technic sl-b270 turntable. It has been tested and it works. It is missing the cover. Everything else is there. All the cables. It is in pretty good shape. Good luck. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e24904b03-0xfa-
|
|
|
Technics SL-J90 DC Servo Automatic Turntable Record Deck JAPAN MADE
Technics SL-J90 DC Servo Automatic Turntable Record Deck JAPAN MADE We take as many supersizable photo's as we can to show you the exact condition of the item. Please take time to inspect the photo's. If any accessories such as remote control are included they will be shown in the photo's or included in the description. Fully tested and in perfect working order. AUTO DISC SIZE 33/45 SPEEDS MADE IN JAPAN 360 x 320 x 80 WDH(mm) BUY MORE THAN ONE ITEM TO SAVE ON POSTAGE. USUALLY YOU WILL ONLY PAY FOR ONE ITEMS POSTAGE COST- PLEASE ASK US FOR DETAILS. View My Feedback View My Other Items For Sale Add me to your Favorite Sellers Please pay for your item within 3 days or contact us to let us know about a delay. If collecting your item then we only accept cash. INTERNATIONAL BUYERS- DO NOT PURCHASE THE ITEM UNTIL YOU KNOW THE SHIPPING ... moreCOST Our items are carefully and expensively packaged to ensure a safe journey to you. POSTAGE PRICE SHOWN IS FOR UK MAINLAND ONLY. Please ask for shipping costs to Highlands and Islands. Please ask for international shipping costs. Quotes given will be for a service that is fully insured, tracked and with you very quickly. Please ask for an international shipping quote before you purchase the item as it costs us to re-list the item when you realise the shipping cost. Strictly no courier collections. PLEASE READ ALL THESE TERMS BEFORE PURCHASE We will not be held responsible for any international destination charges ie customs/duty etc- it is your responsibility to find out any charges you will incur. If an item is damaged in transit then we will need you to take photo's of the damage for us to file a claim for insurance. If an item is damaged in transit with no physical damage then you will need to pay return postage and as soon as we receive and have inspected the item we will either repair it and send it back to you or issue a refund. We inspect the item to ensure that no malicious activity has taken place since original dispatch(transplanting faulty components into our
|
|
|
PIONEER PL-211AZ Turntable (SH ROTOR/DC SERVO MOTOR)
1 Pioneer two-speed turntable(33 and 45) Model PL-211AZ. The needle needs replaced. But the unit is otherwise in very good working and cosmetic condition.
|
|
|
MT30U4-42 SEM DC BRUSHED SERVO MOTOR NO ENCODER
1 SEM MT-30U4-42 SERVO MOTOR IT IS MISSING THE ENCODER I WAS GONNA MOVE THIS SERVO TO ANOTHER AXIS AND I BROKE THE DAMN ENCODER THIS MOTOR WAS VERY VERY SMOOTH I TRIED PUTTING ONE OF THOSE CAPACITIVE ENCODERS ON IT I COULDN'T GET IT TO WORK. SO IF YOU HAVE ANY QUESTIONS FEEL FREE TO EMAIL ME.
|
|
|
Technics DC Servo Automatic Turntable System SL-B210 with Audio Technica DR200E
This is a Technics DC Servo Automatic Turntable System SL-B210 with Audio Technica DR200E Needle Cartridge. Includes ground wire and cable. It is Belt Driven. In excellent lightly used condition. With no flaws. Made in Japan. I accept paypal and will ship within 1 business day of receiving payment. US shipping only. Thak you!
|
|
|
Technics DC Servo Automatic Stereo Turntable System SL-BD20
This is a Technics DC Servo Automatic Stereo Turntable System model SL-BD20. It was plugged in and Table Turned but could not get the needle to move over to the record. Sound did come out when needle was touch. This is being offered as for parts or Repair. The external condition is good with some signs of wear from use. Please see photos for additional detail and feel free to ask questions. Store: G1 Our customer's satisfaction is our top priority. In the event you experience any problems with your order. Please contact us prior to leaving a negative or neutral feedback and we'll be sure to offer a speedy resolution to any issues that may arise. PAYMENTS o Paypal is the only method of Payment we accept. No exceptions can be made. o Payment must be received within 7 days of the auction's end. o Items left unpaid for more than 7 ... moredays are eligible to be relisted or have an unpaid item claim filed. SHIPPING o Please be aware of our shipping charges prior to placing a bid. o We do offer combined shipping. Please email after the auction's end requesting a revised/ combined invoice. o Requests for combined shipping will be handled on a case by case basis. It may not be possible to combine certain larger items if we feel it may jeopardize a safe arrival. o Any item sold by the Seattle Goodwill is eligible for local pick up at our warehouse 7 days a week between the hours of 9 a.m. and 4 p.m. Please note that payment must be cleared online prior to pick up. As we are unable to accept cash or process payment at our location. o Local pick up items not claimed within 21 days will be relisted without notice and considered a donation. INTERNATIONAL BIDDERS o We do not ship to the following locations: Italy. France, Spain, Russia, Greece, Africa, South America, Central America, Mexico, and Asia(except Japan) o We ship internationally to Japan. United Kingdom, Germany, Australia, New Zealand, Canada and most of Mainland Europe. European customers from countries other than the U.K. and Germany will need to email u
|
|
|
TECHNICS SL-BD20 AUTOMATIC TURNTABLE SYSTEM DC SERVO ! TECHNICS series III
Technics SL-BD20 AUTOMATIC TURNTABLE SYSTEM DC SERVO! TECHNICS series III This is how music is suppose to be heard. This is an amazing working turn table that will just brighten any room! Very little signs of wear and tear. The dust cover has some slight scratches and scuff marks but the item itself is in great condition despite it's age. A beautiful sounding machine! I do not know the life of the needle!
|
|
|
VICKERS TOKIMEC DC-A4-20 HYDRAULIC SERVO DIGITAL VALVE CONTROLLER
VICKERS TOKIMEC DC-A4-20 HYDRAULIC SERVO DIGITAL VALVE CONTROLLER Looks like new or lightly used. T erminal s look new(no trace of hooked wires) Some scratch on one side( bottom) may be from shelf storage. NO BOX, see photos.
|
|
|
Technics DC Servo SL-BD 27 Automatic Turntable System no belt and no needle
TESTED.SPEED STEADY ON BOTH 33&45-Turntable not mint but still very good shape(minor scuffs.Scratches)STEREO- Auto Return-Arm lift&drop manual-TURNTABLE SYSTEM. 33&45. Belt DRIVEN TURNTABLE SYSTEM- IN WORKING CONDITION,Anti-Skate System.comes with no belt no shell, no cartridge& no needle- Works.TESTED.All connecting wires(RCA&power)included Thank you for looking!Great sounding turntable.NO COVER. Made in Japan, WILL ship ASAP is paid for.Can be returned within 14 days.Buyers pays return shipping.
|
|
|
Technics SL-L20 Vintage turntable DC Servo works well with "needle" or cartridge
This is a really nice vintage turn table. It comes as pictured. I tested it for function. After it had been sitting for a spell.wor ks well. If you know Technics stereo turntables. You likely know more about this than I do. It ha s the needle or cartri dge or what ever you call it.it plays music as is. T hank you for looking and feel free to ask any and all questions.
|
|
|
BIO RAD MICROMEASUREMENTS AIMS DC SERVO BOARD Y5301267
BIO RAD MICROMEASUREMENTS AIMS DC SERVO BOARD Y5301267 Pulled from a working environment Buyer receives pictured item only
|
|
|
Allen-Bradley Bulletin 1388 DC PWM Servo Controller instruction manual A & B
General Auction Description: Allen_Bradley Bulletin 1388 DC PWN Servo controller(Series A& B) instruction manual. Publication 1388-5.1-September. 1992 Dimensions: 8.5" X 11" X.25" Manual is in good shape. The exact manual that will ship is pictured in the auction. 101-1277-2245, Payment: Please pay using PayPal. Payment Must be received 3 days after purchase is made. Shipping: I only ship to confirmed addresses. Please make sure shipping address is correct when paying. Return Policy: Returns accepted only if item/items comes broken or does not work. Buyer pays to ship back to the seller. Item/items must be returned to seller to receive a refund of the purchase amount. Item/items must be sent back to seller in the same condition as received and with all accompanying materials. Including packaging or accessories with in 14 ... moredays after receiving item/items. Items NOT returned or not returned properly WILL NOT be refunded. If an items comes damaged or does not work, please inform me immediately so I can try to correct the problem. If you are satisfied with your purchase, please leave positive feedback for me. No returns accepted on tanning beds, electrical parts, lotions, cleaners, or bulk lots, or items sold in as-is in non working condition(this will be stated in the auction if it is sold as non working) Thank you and happy bidding! qsellx Gallery.
|
|
|
Magnetic SA Servo Motor DC 23 SGF
Magnetic SA Servo Motor. Type: DC 23 SGF. 679965. PULLED FROM A RUNNING MACHINE. Agie wire EDM CNC100 DEM315.
|
|
|
TAIG CNC Mill 4 Axis Servo Controller DC motor Spindle Control!
Sherline Rotary Table NOT INCLUDED. But the servo motor for it is. I repeat: The SHERLINE ROTARY TABLE IN THE PICTURE IS NOT INCLUDED(but the servo motor and 4th axis support for the rotary table is) This is a really neat TAIG mill that was converted to CNC my Loco Motion. These sold for almost $5K a few years back. So this is a bargain if you can appreciate the differences between this and the stepper controlled machines. From what I can tell. The person who designed this controller must have been an electrical engineer because it is a very smart design. Everything on the inside of the box is easily identifiable and packed with features I can't even imagine using on a tiny little machine like this. I intended to use the controller on another machine, but I really just need the room now, and don't want it sitting around when it could ... morebe cranking out parts somewhere. This controller has spindle speed control. Coolant/vacuum on/off control relay, and 4th axis control. From what I understand, you cannot do both spindle speed control and 4th axis control simultaneously with only one parallel port- you have to choose one or the other, unless you have a computer with 2 ports. The axes are controlled by DC servos with encoders, and have a 2:1 belt reduction on them. It also has limit switches on every axis. The machine has seen very little use, and I hate to let it go, but I need the bench space for a different machine. You won't be disappointed with this little mill, as it is feature packed. I would add a cable carrier to the Z axis if I were to keep it because there are a lot of cables. Other than that, it is ready to set up and start making parts. We used it for tiny titanium parts and it worked great with the.5mm end mill we used. Don't miss the ever increasingly rare chance to own one of these special machines. It will take me a week after purchase to box up for shipping. And will ship in 3 boxes, and they are all heavy, hence the shipping cost. This ships to the contiguous 48 states only. Thanks!
|
|
|
Pioneer DC Servo Direct Drive PL-51 Turntable LOOK READ
Offering this Pioneer PL-51 turntable from a local school. Please spend some time looking over the many photos before bidding. I would say its functionally fine. But cosmetically challenged. I did spin a record and played it though a small amp i had set up. It played fine and controls seem to work as designed. Having said that, the new owner will want to go through this machine and clean and tweak its mechanical parts. The front two corners have some wear as seen in the pics. The dust cover is intact but both rear corners are cracked, due to heat and time and the cover lift spring stresses. I suppose turntable could be used without a dust cover, but anyhow its cracked as described in last two photos. I am not trying to talk this machine down intentionally, but want bidders to realize that buying a vintage turntable like this one may require ... morea bit of work and money to tweak its aging parts. You are buying a project. I believe in full disclosure and am familiar with a few bidders who will purchase this and find some fault with it. I am doing my best to discourage those bidders by describing it as best I can. Having been an ebay seller for years, I am asking those bidders who choose not to read the above, to refrain from bidding. I try to be honest and upfront always. No monetary adjustments will be made. If you don't like it when it arrives, buyer will pay to return it in original packing. You agree to that anyway in the ebay terms. So, the terms are: Selling turntable as-is for parts or repair. All flaws that I have found have been noted. If item is returned, it must be returned in original packaging and item fully insured, buyer pays the cost of shipping to return. Lately I have also encountered buyers who request items to be shipped in way way oversized boxes with a comical amount of packing materials. If you are one of those, do not bid. I ship daily and will use an appropriate sized box with 2" foamboard surrounding item. I know how to properly pack and ship. Shipping costs are derived from these meas
|
|
|
TECHNICS DC SERVO MODEL SL-B270, ONE YEAR OLD NEEDLE & BELT!!
Hello. This unit is in great condition and has been used on a regular basis. I went ahead last year and replaced the cartridge and the belt(gave it a tune up) The turntable did not come with a dust cover because it was in a rack system, but they are available and it does have the hinge posts on the back. Has easy two wire hook up and can be plugged into any brand stereo receiver with phono or aux. jacks. Please contact me with any questions and thanks for looking!
|
|
|
Sansui A-9 Integrated DC Servo Amplifier, Stereo Verstärker
Sansui A-9 Integrated DC Servo Amplifier. Stereo Verstärker Voll Funktionstüchtig! Äusseres Gehäuse verkratzt.Verbeult und berieben! Front in Ordnung! Siehe Bilder: Unklarheiten gerne vor Kauf erfragen Beachten sie bitte unbedingt die Lieferzeiten von Bücher- und Warensendungen Gegen Aufpreis ist auch ein schnellerer Versand via Dhl-Päckchen möglich Bitte besuchen sie unsere m ich-Seite und empfehlen sie uns weiter* Schauen sie in unserem Ebay-Shop und sparen sie Versandkosten! Täglich neue Angebote! Wenn mal was nicht in Ordung sein sollte. Schreiben oder rufen Sie uns bitte an. Wir garantieren Ihnen. Das wir das Problem auch ohne eine Negativ-Bewertung lösen können. Bei Fragen gerne Mailen oder einfach anrufen Kleingedrucktes: Beachten sie bitte das wir ein 2-Mann Unternehmen sind und uns ... moreimmer die grösste Mühe geben. Alles nach bestem Wissen und Gewissen zu bewerkstelligen. Alle Fotos und Beschreibungen werden von uns persönlich gestellt. Die Versandkosten beinhalten immer auch die Verpackungskosten sowie das Füllmaterial oder ähnliches. Wir versuchen die günstigsten Versandkosten anzubieten. Und sie zahlen bei mehreren Käufen nur 1x den Versand je nach Grösse und Gewicht. Und nun wünschen wir Ihnen viel Spass beim durchstöbern unseres Ebay-Shops! Wir hoffen sie finden gefallen an unseren Angeboten und empfehlen uns weiter.
|
|
|
Technics SL-BD20D DC Servo Automatic Drive Turntable, Grt Cond, Working, 1990's
Technics SL-BD20D DC Servo Automatic Drive Turntable Great Condition. Working Made In Japan. 1990’s Specifications: All Black. Plastic Body Includes dustcover. Phono and power cords, rubber disc mat and User’s Manual(in French& English) Includes headshell and original Technics P34 cartridge(not sure if stylus was ever replaced) 33& 45 rpm selector switch. Cueing(up/down) switch and Stop switch on front deck. Counterweight on tonearm. Specifications: Belt Drive. FG Servo motor for accurate platter rotation. Double gimbal pivot straight line tone arm. Anti-resonant cabinet. Includes P-Mount cartridge. Dimensions(WxDxH) Weight Turntable: 16.9 in x 13.4 in x 3.9 in/ 5.5 lbs Type Turntable- Automatic Speeds Supported- 45.0 rpm. 33.3 rpm Cartridge Type: Moving Magnet(MM) Turntable features Metal platter and hinged detachable dust cover. ... morePower Device Power supply- Integrated Dustcover and Body are both in great condition. With hardly a scuff or scratch on either. Turntable is tested and in full working condition. All turntables and stereos will be carefully packaged and secured in reinforced packaging to ensure safe arrival. Shipping will be via USPS Parcel Post or Priority Mail International. Please see my other listings for more great stereo equipment and vinyl records! Worldwide shipping costs calculated above. I will combine shipping for multiple purchases. PayPal accepted. Payment expected within 2 days.
|
|
|
SANYO TP-1020 AR DIRECT DRIVE DC-SERVO TURNTABLE SYSTEM
THIS UNIT WAS IN A STORAGE AUCTION I WON. IT POWERS ON AND ALL FUNCTION SEEM TO RESPOND. I LACK THE EQUIPMENT(NO NEEDLE) TO FULLY TEST. BEING OFFERED AS IS- BID ACCORDINGLY- ALL SALES FINAL- NO RETURNS! APPROX DIM: 17.25"L X 13.5"W X 5"H. MAY HAVE SOME TYPICAL USED MARKINGS. VERY LIGHT SURFACE SCRATCHES BUT NOTHING MAJOR. PLEASE REVIEW PHOTOS TO SEE THE CONDITION OF THIS ITEM. WILL SHIP AS PICTURED. IF INTERNATIONAL SHIPMENT IS OFFERED FOR THIS ITEM. IT WILL BE SHIPPED USPS PRIORITY INTL ONLY! COMBINED SHIPPING DISCOUNT IS OFFERED. HAVE QUESTIONS? PLEASE ASK BEFORE BIDDING! PAYMENT MUST BE RECEIVED WITHIN 2 DAYS OF THE CLOSE OF AUCTION. IF PAYMENT ISN'T RECEIVED WITHIN 5 DAYS. THE AUCTION WILL BE REVOKED AND A EBAY NON-PAYING BIDDER ALERT WILL AUTOMATICALLY BE FILED. PLEASE VISIT OUR OTHER LISTINGS. THANKS FOR THE SUPPORT! ... morePowered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13e70bc0a01-0x105-
|
|
|
+++ MICRO SEIKI DC SERVO DIRECT DRIVE TURNTABLE MOTOR | DCL-15U1+++
This motor was pulled from a DD 35 turntable and is in perfect working condition. Meaning accurate speeds and no varying speed problems. Wires have been cut from the end of each soldering point. May fit other models but you will have to do your own research. This is guaranteed to be operational. But we are offering 7 day return policy on this item only if found otherwise and will be sent with tamper proof tags that will not interfere with operation-NO OTHER EXCEPTIONS! No other items included. I nsured fast shipping at no additional cost included.
|
|
|
Panasonic DC Servo Automatic Record Turn Table System Model SL-H50BP-K
turntable has been under my bed for years. I dont have the aux cable to plug it in and test it out, from what I understand it worked great. Have hardly any wear on it. Its in new condition.
|
|
|
SANYO DENKI DC SERVO MOTOR & OPTICAL SHAFT ENCODER R301-041EL8 E401000C031 *M*
Check out my! SANYO DENKI SUPER R DC SERVO MOTOR AND OPTICAL SHAFT ENCODER TYPE: R301-041EL8 E401000C031(INVENTORY LOT#672) THIS IS IN GREAT WORKING CONDITION. MIKE Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 30 DAY MONEY BACK MIKE Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for ... moreus to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, h
|
|
|
FANUC DC SERVO MOTOR MODEL O A06B-0613-B WITH PULSE CODER A860-0300-T002
Check out my! FANUC DC SERVO MOTOR MODEL O WITH PULSE CODER TYPE: A06B-0613-B PULSE CODER: A860-0300-T002 OUR INVENTORY# 100 THIS IS IN GREAT WORKING CONDITION. Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 7 DAY MONEY BACK( VISIT OUR EBAY STORE) Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day ... morein order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center
|
|
|
MITSUBISHI DC SERVO MOTOR TS3029N3E106 TS 3029N3E106 \
Check out my! MITSUBISHI DC SERVO MOTOR AND BRUSHLESS TACHOGENERATOR-RESOLVER TYPE: TS 3029N3E106 THIS IS IN GOOD WORKING CONDITION. Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ... moreONLY. WE CAN SHIP BY UPS GROUND. FREE SHIPPING TO ALL 48 STATES AND CANADA. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in the market to sell your surplus equipment or purchase that hard to
|
|
|
Filtec 28694 Servo Controller & Power One DC Power Supply
Filtec 28694 servo controller Filtec 28694 Servo Controller& Power One DC Power Supply- Tested– Includes used servo controller. Power supply, servo motor adapter and wires. REMOVED FROM A WORKING ENVIRONMENT This unit was drive eight Futaba normal size servo motors with drive bank cameras. All this staff with you see in the picture are tested before selling. Ready to run 110v to 230v. You can control this unit from RS485 input but with program this working I don’t know. I tested it manually from selector and +- all motor holding positione with you select. Please review all the pictures. If you have any questions about this item. Please search from Google or connect manufacture. This is all what I can say. Actual item pictured. Shipment Delivery time is 7-21 business days Tracking code will be provided. We ship within one-business day ... moreafter payment received. We will ship to the Paypal shipping address We Ship to Worldwide. Payment Payment method: We only accept PayPal Other Policies We are not responsible for any custom duty or import tax. These charges are the buyer's responsibility. Please contact us if you are not satisfied with the item when you receive it. If you have any questions. Please feel free to Email us. Serious Buyer Only! Please place bid only if you agree with all the terms. FEEDBACK: NO NEED FOR NEGATIVE OR NEUTRAL FEEDBACK. If there is a problem please contact us before leaving feedback. If an item does not work as specified or in other condition as described. We always take care of our customers. At RedlineMerch we strive for 5 star detailed seller ratings and we work for our customers to ensure the smoothest possible transaction. HAPPY BIDDING!
|
|
|
Elwood Gettys DC Servo Motor M235-H60A-300S (RETAILS FOR ABOUT $4300)
THIS IS A SERVO MOTOR 37.8V/KRPM 33AMP 3.2LB/IN- M235-H60A-300S Manufactured by ELWOOD CORPORATION GETTYS. WE HAVE NOT TESTED THE MOTOR BUT THE COMPANY THAT IS SELLING THIS SAID IT'S TESTED AND WORKS PERFECTLY. IT WAS REFURBISHED AND READY TO GO. THIS RETAILS NEW FOR ABOUT 4300.00. WINNING BIDDER TO PAY $60 S/H OR IF YOU HAVE A UPS ACCOUNT YOU CAN FILL OUT THE SHIPPING REQUIREMENTS AND EMAIL US YOUR LABEL. GOOD LUCK Posted with
|
|
|
Moog Silencer BN34HS-25AW-04LH High-Speed Brushless Neo-Magnetic DC Servo Motor
Search our eBay Store! Moog Silencer BN34HS-25AW-04LH High-Speed Brushless Neo-Magnetic DC Servo Motor SKU: JV-EDD-A-BRUSHMOOGCER Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Moog Silencer BN34HS-25AW-04LH High-Speed Size-34 Brushless Neodymium-Magnet Pump/Blower/Centrifuge D.C. Servo Motor Type: BN34HS-25AW-04LH*PLEASE NOTE: This unit was custom designed and we are unable to obtain the specifications* Physical Condition: Good. Minor marks and scratches to the unit’s casing. Shaft appears to be in good physical condition. Functionality/Degree of Testing: We do not have the necessary resources ... moreto test this unit. Dimensions(L" x W" x H" 6 ¾* 6* 6 1/8 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combi
|
|
|
Vintage Technics DC Servo SL-BD27 Automatic Turn Table Belt Drive Turntable
You are bidding on: Vintage Technics DC Servo SL-BD27 Turntable, In GREAT overall condition, Comes with mat and needle, Missing the dust cover, See pictures for further details, Don't miss out on this great lot! Please check out my other auctions! Please ask any and all questions before bidding. All sales are final. All items are sold as-is.
|
|
|
Glentek GM4050 DC Servo With Fadal Coupler
Glentek GM4050 DC servo motor with resolver taken from a Fadal milling machine. Servo comes with the Fadal coupler. Posted with
|
|
|
FANUC DC SERVO MOTOR 10M A06B-0651-B012 A06B 0651 B012 W/ ENCODER A860-0300-T002
Check out my! FANUC DC SERVO MOTOR MOTOR: A06B-0651-B012 ENCODER: A860-0300-T002 OUR INVENTORY# 87 THIS IS IN GREAT WORKING CONDITION. Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 7 DAY MONEY BACK Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. ... moreBefore sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FREE SHIPPING TO ALL 48 CONTINENTAL U.S. STATES. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, br
|
|
|
SERVO DYNAMICS SEM DC SERVO MOTOR MT3OU4-48 MT30U4 48 \
Check out my! SEM DC SERVO MOTOR TYPE: MT3OU4-48*MOTOR ONLY. WITHOUT ENCODER* Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 7 DAY MONEY BACK( VISIT OUR EBAY STORE) Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please ... morecontact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. W
|
|
|
DC SERVO MOTOR-BATTLE BOT-WIND GENERATOR SCOOTER
FOR YOUR CONSIDERATION: RARELY AVAILABLE TO THE UNITED STATES- A HUBNER DC SERVO MOTOR GENERATOR WITHOUT ENCODER. I PURCHASED FROM EBAY-GERMANY FOR HOBBY NEVER REALIZED- I PAID OVER $550.00. THIS MOTOR FEATURES RARE EARTH PM FIELD- 8 BRUSH DESIGN-THE TAG READS 42 VOLT/24 AMP- VERY POWERFULL MOTOR/GENERATOR- GERMAN BUILT LIKE A TANK-I THINK THIS WAS FOR MILITARY USE CONDITION OF MOTOR IS UNUSED BRUSES ARE FULL LENGTH COMMUTATOR UNUSED- HOWEVER OUTSIDE CONDITION SOME SCRATCHES AND SCUFFS FROM STORAGE-MOTOR TESTED WORKS SMOOTH AND POWERFUL-WOULD BE GOOD FOR SMALL EV PROJECT OR WINDMILL GENERATOR. MOTOR COMES WITH ELECTRIC BRAKE AND ENCODER HOUSING ONLY NO COMPONETS/THIS MOTOR WAS NEVER INSTALLED. BODY WITHOUT BREAKHOUSING IS 3 1/4 INCHES HIGH/ 71/4 DIAMATER AT ITS WIDEST POINT-13MILLIMETER KEYED SHAFT ON TOP BY 3/4 INCH LONG-THE BACK HAS A 12 ... moreMILLIMETER KEYED SHAFT APPR 2 1/4 INCHES LONG. THIS IS A PRETTY NEAT MOTOR I HAVE NOT SEEN ANYTHING LIKE IT IN THE LAST 10 YRS OF AMERICAN EBAYING. INTERNATIONAL BUYERS PLEASE CONTACT ME FOR SHIPPING COSTS.
|
|
|
Pittman GM9413J821 30V DC Servo Motor 500cpr LAM 9600 OnTrak
Questions? Call us: 1-877-328-9236. Pittman GM9413J821 30V DC Servo Motor 500cpr LAM 9600 OnTrak. Manufacturer: Pittman Model: GM9413J821 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Pittman Condition: Used. Comes in non-original packaging. This servo motor is in good condition with a few scuffs and scratches from normal use and being shuffled around in storage. But nothing major or anything that would affect function. Notes: This motor was pulled from a working setup that was being decommissioned. But was not tested separately after removal. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Pittman GM9413J821 DC Servo Motor, Specifications: Manufacturer: Pittmann, Model: GM9413J821, Description: DC Servo Motor, Voltage: 30.3 Volts D/C, Cycles ... morePer Revolution: 500 CPR, Ratio: 38.3:1 Ratio, Total Weight: 1.30 lbs. Condition: Used, Quantity: 1, SKU: M27P005 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to co
|
|
|
FANUC GETTYS DC SERVO MOTOR MODEL 20 W/O ENCODER A06B-0602-B032 A06B0602B032
Check out my! FANUC GETTYS DC SERVO MOTOR MODEL 20*WITHOUT PULSE CODER* MOTOR ONLY) TYPE: A06B-0602-B032(OUR INVENTORY# 87) THIS IS IN GREAT WORKING CONDITION. ALL ITEMS HAVE BEEN CAREFULLY REMOVED. Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS- DETAILS: 30 DAY MONEY BACK Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by ... morenext business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal
|
|
|
TECHNICS SL-J110R DC SERVO AUTOMATIC MIDI SEPARATE TURNTABLE VG CONDITION c1990s
A TECHNICS ST-X902L TUNER IN EXCELLENT CONDITION CIRCA 1990s PAYMENT MUST BE COMPLETED WITHIN 3 DAYS OF AUCTION END. UNLESS PREVIOUSLY AGREED SPECIFICATION INCLUDES: MADE IN JAPAN MIDI SIZED SEPARATE(360mm WIDE) TURNTABLE. DUST LID, T4P CARTRIDGE, ADAPTOR, SYSTEM LINK CABLE, INTERCONNECTS AND MAINS LEAD(AC OUTLET PLUG) BELT DRIVEN DC SERVO AUTOMATIC AUTO DISC SELECTOR 240v SERIAL NUMBER: GGJCB03595 SUPERB MIDI SIZED SEPARATE TURNTABLE. MADE IN JAPAN BY TECHNICS, TESTED AND IN PERFECT WORKING ORDER FEATURES AUTO DISC SIZE SELECTOR AND BELT DRIVEN MOTOR IN VERY GOOD CONDITION AND PERFECT WORKING ORDER. THE HINGES THAT ATTACH THE DUST LID TO THE UNIT ARE BROKEN. BUT THE DUST LID ITSELF IS COMPLETE AND HAS NO CHIPS OR CRACKS. INCLUDES TURNTABLE. DUST LID, T4P CARTRIDGE, ADAPTOR, SYSTEM LINK CABLE, INTERCONNECTS AND MAINS LEAD( WITH AC OUTLET ... morePLUG) PLEASE CLICK ON THE IMAGES BELOW FOR A CLOSER LOOK: IF YOU REQUIRE ANY MORE INFORMATION OR PHOTO'S. PLEASE ASK POSTAGE COSTS: MOST OF MAINLAND EUROPE: 28GBP USA/CANADA: 40GBP FAR EAST/AUSTRALIA: 48GBP SOUTH AMERICA. EUROPEAN UNION AND THE REST OF THE WORLD: PLEASE CONTACT US FOR ACTUAL COST PLEASE TAKE INTO CONSIDERATION THAT POSTAGE INCLUDES MATERIALS AND TIME SPENT PACKING. IF YOU CONSIDER OUR COSTS TO BE TOO HIGH. PLEASE DO NOT BID. ITEMS SELLING FOR 60GBP AND ABOVE WILL INCLUDE INSURANCE AT BUYERS COST PAYMENT IS REQUIRED WITHIN 3 DAYS. UNLESS PREVIOUSLY AGREED. WE TRY OUR BEST TO DESCRIBE ITEMS AS ACCURATELY AS POSSIBLE, IF THERE IS A PROBLEM, PLEASE CONTACT US BEFORE LEAVING FEEDBACK
|
|
|
MITSUBISHI DC SERVO MOTOR TYPE HD MODEL NUMBER 81-125
USED ON VERY GOOD CONDITION MITSUBISHI DC SERVO MOTOR PERMANET MAGNET TYPE HD MODEL NUMBER 81-125 MFG DWA 2636437 NO ENCODER SER NUMBER N89976010 WITH TIMING BELT PULL& FLEXBEAM SHAFT COUPLING GREAT PRICE SEE PHOTOS PLEASE EMAIL FOR COMBINED SHIPPING Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Copley Controls DC Servo Motor Driver 800-262
Copley Controls DC Servo Motor Driver 800-262 Used/Tested Working Mfg: Copley Controls Model: 800-262 DC Servo Driver Used Removed From Working Surplus In Good Cosmetic Condition Unable To Test What Is Pictured Is What You Will Receive Sold As Is Take A Moment And Visit Our Ebay Store Please Read Terms and Conditions USA Sales Only All auctions must be paid for with in 10 Days of end of auction. All items are SOLD AS-IS Unless otherwise stated in the auction. All end of auction notifications will be sent to your registered Ebay email address. We will combine shipping on auctions if possible. However we may not combine shipping on auctions sold by different CTR Surplus sellers. If for some reason an item has to be returned to CTR Surplus the Buyer will have to pay the return shipping. The original shipping charges are not refundable. All returns ... moreare subject to a 20 percent restocking fee. For any return you must email CTR Surplus with in 3 days of receipt of the item. Please ask all questions before placing a bid. Most items will be shipped UPS Ground and automatically insured for the bid amount. Any item that requires Truck Freight will require Buyers phone number and someone to unload the item from the truck(The Freight Company Will Not Unload The Truck) CTR Surplus 202 W. Livingston Ave Crestline Ohio 44827 Phone 419-683-3535 Fax 419-683-3230 All Auctions Will Be Automatically Insured For Final Bid Price Please click here to see my other auctions. 7.00% Sales Tax Will Be Charged On Item Price And Shipping On All Ohio Sales Powered by a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13eaf58b370-0xfa-
|
|
|
Hitachi DC Servo Turntable -Model HT-20S- for Parts
This is one of my husbands non-working turntables. If you need more information. Let me know, and I will have him answer your questions. I'm sure it's missing a cartridge, but it has a dustcover. This is all I know. Posted with
|
|
|
SANYO RECORD PLAYER TP1012 AUTO RETURN / DIRECT DRIVE DC-SERVO SYSTEM TURNTABLE
This has been in storage for awhile. I replaced the cartridge with a Grado. Maybe 15 years ago. Works. Can't define the condition of the needle but I know it plays records fine. Spare cartridge(pretty sure it's the original one that came with the turntable) and pictured cleaning accessories included. AK. PR and HI will be shipped USPS Parcel Select for $40.
|
|
|
Allen Bradley DC Servo Drive 1388B-AV-40
The Drive was part of a complete machine retrofit and was in good working condition at the time the machine was shut down
|
|
|
Anilam CNC replacement Advanced Motion Controls AMC Brush DC Servo Amplifier
This auction is for 1 good working Advanced Motion Controls AMC Brush PWM servo Ampifier. In original box. Model 20A20. The drive is rated 190VDC max with 10Amps continuous. 20A peak. Very compact drive. Good for a direct Anilam drive replacement of old Westamp units. Should drop in directly with minimal rewiring. Scout ebay and pick up two more when they show up. Will operate the large 140V Anilam DC brush servos with tachometer feedback. Be careful. Most other AMC drives of similar cost are not suitable for operating as a replacement for the Westamps because they have a significant lower voltage rating. Typically only 80VDC. Thanks for looking.
|
|
|
Dunkermotoren GR42X40 Brushless DC Servo Motor w/ RE30-2-200 Encoder 24V 3100RPM
Search our eBay Store! Dunkermotoren GR42X40 Brushless DC Servo Motor w/ RE30-2-200 Encoder 24V 3100RPM SKU: JV-MAT-A-GR42X40 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Dunkermotoren GR42X40 Brushless DC Servo Motor w/ RE30-2-200 Encoder 24V 3100RPM Auction Includes: 1x Dunkermotoren GR42X40 Motor 1x Dunkermotoren RE30-2-200 Encoder Physical Condition: Good. Unit has minor scuffs/scratches and signs of use. Functionality/Degree of Testing: We do not have the necessary resources to properly test this unit. Power cable adapter is not included. Dimensions(L" x W" x H" 5*2*1.75 ... morePLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to
|
|
|
Heizmann SL 100-2SC DC Servo Motor, Convac
This is a back up motor for our Convac spin coater. Type: SL 100-2SC. 60VDC, 8A, 420W, 10,000RPM. Tacho output. Comes with test data sheet. In very good physical and working condition. Two available. International buyer please contact me for exact freight cost.
|
|
|
Mitsubishi DC Servo Motor HD 201-12 w/ Seiki DC Generator TT-A-11. Dwg. Z636438.
Mitsubishi DC Servo Motor HD 201-12 w/ Seiki DC Generator TT-A-11. Dwg. Z636438. Permanent magnet. Recently scrapped out a Mazak CNC H-15 horizontal pallet changer machining center because of mechanical issues. All electronics were working. Selling as-is. Seiki Brushless generator TT-A-11 Spec No. BKO-NC6075 Serial No. 31693 Parts No. TS3033N. Serial No. of servo Motor HD 201-12 is N25208175.
|
|
|
TECHNICS DC SERVO SL-J110 AUTOMATIC LINEAR TURNTABLE SYSTEM RECORD PLAYER
TECHNICS DC SERVO SL-J110 AUTOMATIC LINEAR TURNTABLE SYSTEM RECORD PLAYER IN VG WORKING CONDITION. BUYER TO PAY FOR SHIPPING. GOOD LUCK! Posted with
|
|
|
NICE! Vintage TECHNICS SL BD20D DC Servo Automatic Drive TURNTABLE *WORKS GREAT*
Your Bidding on a Pre-Owned in Excellent Working Condition.VINTAGE TECHNICS DC SERVO AUTOMATIC DRIVE TURNTABLE! MODEL SL BD20D*WORKS GREAT* All Black Plastic Body MADE IN JAPAN! DOES NOT INCLUDE MANUAL! 33& 45 RPM Selector Switch. Cueing Up and Down, and Stop Button ARM IS IN FANTASTIC CONDITION!COSMETICALLY OVERALL GREAT CONDITION!Few Light Scratching on The Plastic Cover! I TOOK SEVERAL DETAILED IMAGES OF THIS VINTAGE TECHNICS TURNTABLE SO YOU KNOW EXACTLY WHAT YOUR BIDDING ON! g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13ec180569e-0xfa-
|
|
|
Yaskawa Minertia Super Series UGSMEM-02-HK12 DC Servo Motor
Yaskawa Minertia Super Series Servo Motor UGSMEM-02-HK12 DC UTOPI-024SCH TESTED WORKING ANY QUESTIONS PLEASE ASK. PICTURES ARE ALL ACTUAL UNIT YOU WILL RECEIVE. Please read before bidding" Your satisfaction is very important to us. If you experience a problem of any kind with your purchase please contact us first before leaving any feedback or opening any claims, any issues will be resolved more efficiently if you contact us first and deal directly with us. We do stand behind our products and will do anything in our power to make sure that you feel satisfied with your purchase. We will not be able to help you if you don't let us know first. 14 Day DOA Warranty_ Emails are answered M-F 7- 3 P.M. MT with the exception of holidays. Shipping quote is for the continental United States only( Alaska. Hawaii and Puerto Rico need to contact ... moreus for a shipping quote. Terms and Conditions: Payment must be received within 7 days. Buy it now requires instant payment) We accept Pay Pal. If using Pay pal to make payment. Your address must be confirmed with Pay Pal or I will return the payment. Arizona residents must pay 9.3% sales tax unless you can provide us with a valid tax-exempt form via fax. State of Arizona = 6.6% +2% City of Phoenix Tax +.07 Maricopa County Sales Tax = 9.3. IF YOU PURCHASE AN ITEM AND WANT IT SHIPPED TO ANY ADDRESS IN AZ. You will HAVE TO PAY THIS TAX, UNLESS YOU HAVE A VALID ARIZONA RESALE TAX CERTIFICATE. NO EXCEPTIONS! We ship daily Monday-Friday. We combine shipping cost on multiple items won. Same items receive a 50% shipping discount. You will receive email notification with tracking info from UPS or USPS once item has shipped. No returns on AS-IS items. DOA warranty items must be returned within 14 days of receipt. Upon S/N verification a credit or exchange will be made based on our inventory. Please be certain you can use what you are bidding on. As incompatibility is not a valid reason for return. Good luck
|
|
|
SERVO DYNAMICS CNC DC SERVO DRIVE SD1525-10
This DC servo drive was removed from a working machine. It is used in CNC systems such as ANILAM. HURCO and BANDIT for axis control. We can ship product. Buyer responsible for all shipping cost prior to shipping. NYS Residents please remember State sales tax will be added to purchase price. SOLD AS IS. ALPCO Recycling Inc 846 Macedon Center Rd Macedon NY 14502 315-986-8900"Finding The Best Solutions For You"
|
|
|
Allen-Bradley 1388 DC Servo Controller 1388-AV20
Allen-Bradley 1388 DC Servo Controller 1388-AV20 ITEM DESCRIPTION: Used. Good condition. ACCESSORIES: None. No manual. Cables, or any other accessories. My Policies: PAYMENT OPTIONS: At this time I only accept Paypal as payment for ebay items. TAX: New Mexico residents pay 6.9375% Gross Receipts Tax SHIPPING& HANDLING SHIPPING TERMS: The buyer is to pay all shipping charges. Most items will be listed with the ebay shipping calculator so that you can calculate your shipping cost prior to bidding. PLEASE NOTE: You will be charged the USPS. FEDEX or UPS retail shipping rate as given by the ebay shipping calculator. These are the actual rates as computed by the calculator based on the weight and dimensions of the package and the distance it is to be shipped. IMPORTANT NOTE: In order to provide faster shipping service I am currently phasing ... moremy shipping operation to a shipping contractor. The contractor mainly uses FEDEX for ground shipments but I have not been able to change the type of shipment in all of my ads. If you choose UPS as a shipping option. Your item may be shipped FEDEX ground instead of UPS. FIXED SHIPPING RATE- CONTINENTAL UNITED STATES ONLY! If a fixed shipping rate is stated in the ad. It applies to shipment within the Continental United States only. Alaska, Hawaii and International will need to contact me for shipping rates. INTERNATIONAL SHIPMENT CUSTOMS DECLARATION: International customs fees and customs brokerage fees(if applicable) will be charged to the buyer. The customs declaration form will be filled out truthfully with the actual bid amount given as the value of the package. I will not mark items as gifts or claim a value less than what has been paid for the item. You may be interested in on eBay. Powered by
|
|
|
Lot of (10) Allen-Bradley Bulletin 1388 DC Servo Controllers for Parts/Repair
C9383 Lot of(10) Allen-Bradley Bulletin 1388 DC Servo Controllers for Parts/Repair- Untested- Condition unknown- Selling for Parts or Repair Please review all the pictures. They are part of the description. We will load at no charge on a truck you send and pay for. If you do not have a freight carrier we can provide a freight quote. We combine shipping whenever possible. Not responsible for customs charges.
|
|
|
Fanuc DC Servo Motor Model ? Type ? Pulse Coder Type A860-0300-T002
Used Fanuc DC Servo Motor Model? Type? with Pulse Coder type A860-0300-T002. This Motor was removed form a working CNC machining center a few years ago. The tag on the motor cannot be read. It is being sold as is. If you want it shipped. We will strap it to a pallet and you can have your carrier pick it up at our shop. If you have any questions call Jay at 916 771-0201 m-f. 8-5 Pacific time.
|
|
|
Fanuc DC Servo Motor Model 10M Type A06B-0651-B005
Used Fanuc DC Servo Motor Model 10M Type A06B-0651-B005. This Motor was removed form a working CNC machining center a few years ago. It is being sold as is. If you want it shipped. We will strap it to a pallet and you can have your carrier pick it up at our shop. If you have any questions call Jay at 916 771-0201 m-f. 8-5 Pacific time.
|
|
|
Kollmorgen PSR4/5A-112-0400 DC Servo Drive 115VAC 12A 1 Phase *FOR PARTS ONLY*
Kollmorgen PSR4/5A-112-0400 DC Servo Drive 115VAC 12A 1 Phase*FOR PARTS ONLY* From our inventory. We are selling a Kollmorgen PSR4/5A-112-0400 DC Servo Drive 115VAC 12A 1 Phase*FOR PARTS ONLY* Specifications: Model# PSR4/5A-112-0400 More Information: Voltage: 115VAC Amperage: 12A Phase: 1 Output: 140VDC Amperage: 7A Please Note: The terminal connector has been damaged on the front of the unit. May need additional repairs to become fully functional. This listing is for parts only. Only returns on shipping damage will be honored. See pictures for additional detail. ST0-3 12 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is ... morebelow a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 12 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must
|
|
|
Yaskawa CPCR-MR155GC DC Servo Drive [PZ2]
ITEM DESCRIPTION. Condition: Refurbished When reparing drives. We perform: Evaluation in a test stand- Disassembly- Cleaning- Replacement of damaged components- Replacement/upgrade of capacitors- Full Testing: Power Section. Power Supply, Control Board, to ensure proper communication and operation- Painting of damaged components- Assembly- Final test run with ACTUAL motors and CNC simulator machine to ensure 100% operation! This item carries Precision Zone standard 90 day Ebay warranty on parts and labor from date of its sale. Payment Terms. Precision Zone ships worldwide and accepts PayPal and most Credit Cards. For Customer Service call 800-551-4420 or 847-465-9060. All items are priced each. All items are subject to availability and passing our QA inspection. NET Terms available to customers of satisfactory credit after approval. To avoid ... moredelay in filling orders. Purchasers without previous experience with Seller should remit cash, PayPal, or pay with VISA/MasterCard. Customers may be subject to Illinois sales tax. Repair Services Turnaround Time. Standard repair lead time is 5-10 business days after approval. Rush services are available. Ranging from same day to 72 hour rush. Please contact us for pricing and availability on rush repair services. Exchange program available with a wide range of drives on hand at any given time. Same day rush services also available on exchanges. Packaging and Handling. All items are custom packaged to ensure proper safety of unit(s) Items above 80lbs require custom shipping cartons for protection. Customers responsible for additional freight charges. Shipping. Free Domestic(Mainland U.S.A. Excluding Alaska and Hawaii) Shipments: All domestic shipments under 70 lbs are processed via free UPS Ground Service. Domestic shipments over 70 lbs are processed via freight service. Freight and handling fees apply. Contact us for additional freight charges. Alaska. Hawaii and International Shipments: We ship worldwide from Illinois. USA using UPS, FEDEX, DHL, or Truck Freig
|
|
|
Kollmorgan TPA/2 15840-602 DC Servo Drive
Th is Drive was part of a complete machine retrofit and was in good working condition at the time the machine was shut down. Need a Retrofit/ Rebuild check out espcnc in CT
|
|
|
ELECTROCRAFT G642T-ANF 0642-31-011 DC SERVO MOTOR D203457
Brand: ELECTROCRAFT Condition: Used Model: G642T-ANF 0642-31-011 Type: Servo Weight: 6.85 lbs Dimensions: 10 X 5 X 5 SKU: D203457 Additional Notes: 1/2IN SHAFT
|
|
|
Trust Automation TA105 Linear DC Brush-Motor Servo Amplifier 15-48V 25-50W
Manufacture: Trust Automation Model: TA105 Description: Trust Automation TA105 Linear DC Brush-Motor Servo Amplifier 15-48V 25W continuous-50W peak Condition: used good Details: few573/test/4 Extra Info: 4lbs http:trustautomation.com/Library/pdf/Datasheets/TA105.pdf Please Fully Read our Policy If it's NOT in the picture. Or in the description, then it will NOT be included in this sale. This applies to power cords, cables, manuals and A/C adapter! If you experience a problem Please contact us FIRST! We strive to do our best to work with customers to resolve issues. All of our auctions include notes on the condition of the item(it may require cables or plugs or even more components to function) If it is not in the picture it is Not included. We do stand behind what we sell. We never intentionally sell defective products unless it is stated ... moreas such in the auction(DOA. For repair or parts) If you have a problem with a product, please contact us right away(within 14 days) If an item is listed as"AS-IS" then it is simply that, AS-IS" and can't be returned. There will be no refunds of any kind on AS-IS items. If auction says"parts or repair" the item is NOT Functioning properly, item is described as best as we can, and has No Returns No Refunds. We acquire our equipment from reliable sources. Many of our items are tested in-house. Some items are not tested, either because we trusted the source of the equipment based on their history with us, or because we are unable to test the equipment(this would be because we do not have proper equipment to test or lack of knowledge in the product itself) Although we welcome your questions and inquiries. Bidders are expected to do their own research in regard to the compatibility and/or software/driver requirements for any item they are considering purchasing. In most cases, all information that we have available to us is included in the text of the auction. Any other questions email us or call! Thanks! Payment and Shipping We accept credit cards ove
|
|
|
MCS LA2000-62 Motion Control DC Servo Amplifier Brushless Motor Controller / QTY
Payment Policy Brand New Sony CyberShot 8 MP Di MCS LA2000-62 Linear Brushless Amplifier Motor Controller Motion Control Systems Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description MCS LA2000-62 Linear Brushless Amplifier Motor Controller Motion Control Systems Used Clean Working Condition Motion Control Systems MCS Linear Brushless Amplifier Motor Controller Model: LA2000-62 Input Voltage: 115/230V. 50/60 Hz, 10A Output Voltage: 5V. 10A Item Condition Used Clean Working Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive ... moremay vary from the item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However larger items and quantity orders take more time to pack. 2- Shipping Method: Our standard carrier is UPS f
|
|
|
COMPACT MOTORIZED ACTUATOR 12.5 MM TRAVEL OPEN-LOOP DC SERVO, CMA SERIES
VF-187 SERIES? ROTARY AND 1 INCH LINEAR STROKE http:www.auctiva.com/stores/viewstore.aspx COMPACT MOTORIZED ACTUATOR 12.5 MM TRAVEL OPEN-LOOP DC SERVO. CMA SERIES The CMA-12CC is obsolete. Please refer to the TRA12CC actuator replacement. The CMA-12CC Open-loop DC Actuator has 12.5 mm of travel. The CMA provides sub-micron minimum incremental motion and can be used for loads up to 90 N. To protect your investment. CMA actuators include fixed integrated limit switches. Fail-safe limits cut motor power, preventing accidental over travel. CMA actuators provide reliable motorized motion in a lightweight and very compact package. The CMA incorporates an excellent space saving design(only 19.7 mm height x 15.2 mm width) that allows it to be used with a wide variety of linear stages, mirror mounts, and OEM applications. The CMA is designed to fit ... moreyour existing manual stages and other opto-mechanical components as a direct replacement for manual micrometers. Model CMA-12CC Travel Range, 12.5 mm, Minimum Incremental Motion, Maximum Speed, 0.4 mm/s, Axial Load Capacity(+Cx) 90 N, Cable Length, 3 m, Backlash, Base Material, Aluminum, Drive Mechanism, Rolled lead screw, Feedback, Open Loop(no encoder) Drive Screw Pitch, 0.5 mm, Reduction Gear, 256:1, Limit Switches, Mechanical switches, Motor, DC servo motor UE10CC, Drive Type, DC Servo, Vacuum Compatibility, No, Weight, 0.1 kg(0.2 lb) Comes as shown in photos PLEASE NOTE: Unit MUST be removed from our facility within one week of end of auction. 6.00 Lbs(UNDER) GGG 01242011 Sales Tax will apply to items sold to buyers who take delivery in California. We will send this unit via UPS. We do not charge handling fees; high bidder pays actual shipping charges. Item may be picked up from Northridge California location. 818) 267-8074 Be sure to check out my other listings on Ebay. Item will immediately be re-listed if payment is not received within 5 working days. Please contact seller if for any reason payment cannot be ma
|
|
|
GOULD SERVO MOTOR AND GETTYS DC DRIVES
THIS IS A SET OF 4 MOTORS AND 4 DC SERVO DRIVES REMOVE FROM A WORKING MACHINE HAD BEEN UPGRADE. 3 DC DRIVES 33 AMPS(N350) GETTYS 1 DC DRIVE 60 AMPS(350) GETTYS 3 SERVO MOTORS GOULD MODEL M238-H50A-300Y-AK 33 AMPS 1 SERVO MOTOR GOULD MODEL M237-H50A-300Y-AK 60 AMPS ALL THIS ITEM ARE USED BUT VERY GOOD CONDITIONS
|
|
|
Panasonic DC Servo Automatic Record Player Turn Table System Model SL-H50BP-K
Item is in good working order but does have some cosmetic wear(surface scuffs on lid) See photos. Bid with confidence. Check my feedback. Posted with `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13ecf97eb7a-0xf3-
|
|
 |