|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$3.40 Shipping Condition: New Location: China Reversible Stepper Motor Speed Regulator* Pulse Signal Controller* stepping, Features: 100% Brand New Product Parameters: Input: DC 7.5-24V Output frequency: ... more40-200KHZ Control range of stepping motor speed: 0~998 rpm Interface: +24V input +5V output PUL DIR EN GND Package 100% Brand New 1 x Reversible Stepper Motor Speed Regulator* Pulse Signal Controller* stepping Shipping All the items will be dispatched within 1 business day by Airmail after payment cleared. Items will arrive in 10-30b usiness days(weekends and holidays not included) The arrival time depends on some factors and different areas. Express delivery is for large quantity or you can pay extra shipping cost. Please choose some local sellers. If you are urgent and cannot wait patiently in the shipping time we declared. Once purchase. Please DON’T leave negative or neutral feedback if you haven’t received item in 30 days, because we have mentioned the shipping time repeatedly.Thank you! Country Delivery Time Working Days(not including holiday) 5-7 8-10 11-14 15-19 20-30 30 Working Days + Saturday + Sunday 5-9 10-14 15-20 21-25 26-30 35 United States Rate(item arrived) 9% 50% 21% 13% 7% Refund or Resend United Kingdom Rate(item arrived) 10% 62% 20% 3.5% 4.5% Refund or Resend Australia Rate(item arrived) 23% 50% 13% 8% 6% Refund or Resend France Rate(item arrived) 1.5% 20.5% 45% 23% 10% Refund or Resend Germany Rate(item arrived) 5.5% 25% 35% 19% 15.5% Refund or Resend Canada Rate(item arrived) 0.0% 44% 35% 18% 3% Refund or Resend Spain Rate(item arrived) 1.5% 25% 50% 14% 9.5% Refund or Resend Payment We accept Paypal only. Please pay within 3 days after the auction ended. If you pay us by e-check through PAYPAL. You have to wait till it has cleared. We are not responsible for any custom duty or import tax. you can pay via Paypal anytime. And your package will be sent out within 24 hours(except weekend and holidays) upon receiving the payment. Serious Buyer Only! Please place bid only if you agree with all the terms. Feedback: The deliver
Buy It Now
Free Shipping Condition: New Location: Whippany, United States Maximum Power : 6000W (Resistive Load Li mit Power). It is very convenient and practical. Efficiency: Over 90%.
Buy It Now
Free Shipping Condition: Used Location: South Korea AUTONICS / MD2U-MD20. ※ Manufacturer : AUTONICS. ※ Designation : Step Motor Driver, 1pcs. Step Motor Driver. Use your negligence does not apply. (Breakage, ... moreOver power etc).
Buy It Now
Free Shipping Condition: New Location: China Input and Output: all input is optocoupler isolation, while output the negative pulse. The low level signal is valid. Output Frequency: up to 20KHz. Operation ... moremode: (dip switch, 1-up, 0-dow n). Start the motor and it will be in forward rotation again on and on.
Buy It Now
$32.20 Shipping Condition: Used Location: Gibsonia, United States Optem Stepping Motor Junction Box With Motor Board, Optem Zoom 125 & Chords. Condition is Used. Shipped with USPS Priority Mail.
Buy It Now
$2.99 Shipping Condition: New Location: China Rated current: 5A Maximum current 15A. Working frequency: 1KHz-99KHz adjustable, 1KHz step, the default frequency is 20KHz, the accuracy is about 1%. ... moreTurn clockwise to increase the duty cycle. Duty cycle: 0-100%, 1% step.
Buy It Now
Free Shipping Condition: New Location: Edmond, United States Maximum power: 2000W. K-Type Thermocouple 100mm 200mm 300mm.
Buy It Now
Free Shipping Condition: New Location: United States 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. 10 x 5V Stepper Motor 28BYJ-48. It also can be connected as 2 phase to use. Step angle: ... more5.625 x 1/64. Original box: No. Color: Silver.
Buy It Now
Free Shipping Condition: Used Location: Canada Mechanical Marketing Visit our store for more great deals New and Used Parts for Plumbing. Electrical, HVAC, Industrial Automation and Much More Janome ... moreStepping Motor 1.8 Deg/Step 5.5V 8.5 Ohm Excellent Condition 2SHG-055A56S. Description: Sale is for 1(one) Janome Stepping Motor. 1.8 Deg/Step, 5.5V, 8.5 Ohm, MPN: 2SHG-055A56S, Excellent Condition, Move mouse over images to see larger version Click to view supersized image Please read all the information below and review all pictures for more information on condition and contents. What is pictured is what is for sale. Nothing else is included unless otherwise stated. Shipping. After payment has been received high bidders can expect their items to be shipped. Typically the next business day but within 3 days Monday to Friday. To our buyers from the U.S. Purchase with confidence, over 80 percent of our sales has been to you and without any problems. Please note that shipments must pass through Customs and this will typically add a couple of days to the actual transit time. Once it leaves our hands, we have little control of it. Some forms of shipping. Especially for small, light items of $30 dollars or less, are shipped by Small Packets USA-Air. This is and excellent international air mail service but does not come with a tracking number. Expedited Parcel-USA. Tracked Packet USA, and Xpress Post are all trackable services Shipping services may be changed on larger heavier items. Or if multiple smaller items are purchased by one customer. A tracking number( if possible) will be supplied to you automatically in an email from ebay. If you need special handling(using your shipping account for example) Overnight shipment, etc. ask before bidding! Customs Duties and Taxes. If any, are the responsabilty of the buyer. Sorry. No C. O. D. or escrow. I do not make money off of the shipping. The cost represents the weight.Size of the package and the destination. I ship only to Canada and the USA unless otherwise stated in the ad. Terms of Sale Only items pictured ar
Buy It Now
$8.60 Shipping Condition: New Location: Mesa, United States Minebea-Matsushita Stepping Motor 127DE02991 17PM-K402-P4V T5215-04, New in Box, See pictures for overall condition.
Buy It Now
Free Shipping Condition: New Location: United States 2-Phase Stepping Motor with 12 Tooth Brass Gear. Distance between mounting holes: 2.52". Lead Length: 2.0". Wire leads / 5 pin female connector.
Buy It Now
$17.66 Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Oriental Motor Vexta UPH599H-B 5-Phase Stepping/Step Motor DC 2.8A. Manufacturer: Oriental Motor Model: UPH599H-B ... moreCondition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Oriental Motor Condition: Used. Comes in non-original packaging. This motor is in excellent condition with a few scuffs and scratches from normal use. But nothing major or anything that would affect function. Notes: This motor was removed from a working setup that was being decommissioned. But was not tested separately after removal. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Oriental Motor Vexta UPH599H-B 5-Phase Stepping Motor, Specifications: Manufacturer: Oriental Motor(Vexta) Model: UPH599H-B, Description: 5-Phase Stepper Motor, Amperage: 2.8 Amps, Weight: 5.90 lbs. Condition: Used, Quantity: 1, SKU: N18P007 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer ac
Buy It Now
Free Shipping Condition: Used Location: Raleigh, United States See pics for specs, nothing else included.
Buy It Now
$3.00 Shipping Condition: New Location: China 1 DM542X digital DSP 42/57 stepper motor driver". Can drive 42 57 86 4-wire 8-wire two-phase stepper motor. If there is a short circuit, open circuit ... moreand phase difference, the main board ALM warning light will flash, and the driver will not work.
Buy It Now
$9.00 Shipping Condition: Used Location: Glen Mills, United States
Buy It Now
$5.15 Shipping Condition: New Location: Coppell, United States It is used in many different CNC and other automated systems and - in our case - in the Zhuo Mao ZM-R6200 / ZM-R6200C BGA rework stations. This is the ... morebest warranty we can give. We will not try and lie we test each individual part.
Buy It Now
Free Shipping Condition: New Location: Richmond, United States Support set frequency. Support set duty cycle. Default display duty cycle. Support reverse connection protection. Support ON/OFF output. Soft start function. ... moreNormal display mode.
Buy It Now
Free Shipping Condition: Used Location: Jenison, United States Part Number: SG8030D. No warranty beyond that. I have made an honest and fair evaluation of this item, but I am only human. I do miss things occasionally, ... moreand if it is not as I have represented it, I certainly will do what I can to "make it right".
Buy It Now
$6.30 Shipping Condition: New Location: Laredo, United States Condition is "New". It connects to an Arduino Uno using the 2 wire I2C serial interface. This allows open source software drivers to be used such as Adafruit_MotorShield ... moreand AccelStepper. The current limit is set by resistors.
Buy It Now
$7.56 Shipping Condition: Used Location: El Paso, United States
Buy It Now
$8.60 Shipping Condition: Used Location: Gilbert, United States Introducing the SainSmart CNC Micro-Stepping Stepper Motor Driver ST-M5045. This top-of-the-line product is designed for professionals and hobbyists alike ... morewho are in need of a reliable and efficient motor driver for their CNC machines. With its advanced micro-stepping technology, it ensures smooth and precise movements of your stepper motor, resulting in higher accuracy and better quality of your work. This product is perfect for those in the industrial automation and motion control industry, as well as for businesses and individuals who are looking for a high-quality stepper motor driver. It is compatible with STM brand motors and the ST-M5045 model, making it easy to install and use.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 36V/48V 350W Electric Bicycle E-bike Scooter Brushless DC Motor Speed Controller Product Feature: Voltage: 36V/48V Wattage: 350W Throttle : 1-4V Short ... morevoltage protect :31.5±0.5V/42±0.5V Color: silver Dimension: 105 x 70 x 35mm/4.13 x 2.76 x 1.38" Casing material: Aluminium How to use? Turn off the power before wiring. 1. Connect the learning switch. 2. Connect the motor wire(phase A, phase B, phase C). Then connect the hall plug. 3. Connect the power and the twist grip plug..
Buy It Now
$15.46 Shipping Condition: New Location: Cleveland, United States
Buy It Now
$6.78 Shipping Condition: Used Location: El Paso, United States Call: 915-219-7095- 8am- 5pm Mountain Time Anaheim Automation DPS32001 Step Motor Driver T39445 Warranty Information: USED PULLED FROM WORKING EQUIPMENT ... moreProduct Description: Motor Current: 3.5 Amps Phase Continuous. 5 Amps Phase Peak. Clock Input: 15 Micro-seconds Minimum Width. Reference Number: T39445 Estimated Shipping Weight: 5.0000 Estimated Shipping Dimensions: 7.0000 x 7.0000 x 7.0000 Greetings from the Southwest. We are TEAM International Inc, 2nd Hand Store to the Trade. TEAM is a trading company. We buy and sell just about anything. We are always up to making a deal so please feel free to inquire. Check Out Now Payment Shipping Customer Service Check-Out Now: Click the Pay Now button at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later: If you desire a freight quote. Custom shipping, or any extra service we can invoice you after the purchase with your request. Please give us a call or eBay message with your request. We are open to any and all payment methods. We also take credit card payments over the phone. 915) 219-7095• Payments can also be sent to: TEAM International Inc Accounts Payable 2901 Durazno Ave El Paso TX 79905 For shipments to Texas addresses. We are required by State law to collect 8.25% Sales Tax. ATTENTION TEXAS RE-SELLERS: If you have a Texas Resale Tax Certificate we can remove the Texas Sales Tax. We ship all around the world. If you need something out SAME DAY/OVERNIGHT please give us a call to confirm- 915) 219-7095• Shipments Under 60 lbs. UPS: Our primary carrier is UPS for domestic shipments. USPS: For International shipments we use USPS DHL International: We can ship on your DHL account. Please send account number with order. Ship on your account: Have a Fed-Ex or UPS account? Send us the account number and we w ill remove the shipping charge from your order and ship: Overnight. 2 day, or 3 day.
Buy It Now
Free Shipping Condition: Used Location: South Korea 2-63-STEP MOTOR2.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. Stepper motor driver DM542A · 8 channels output phase current setting.
Buy It Now
Free Shipping Condition: Used Location: South Korea Used and in Working Condition.
Buy It Now
$5.99 Shipping Condition: New Location: Spring, United States Nema 23 Stepper Motor w/ Toshiba Driver TB6600 kit. Step Angle - 1.8°. Step Accuracy - 5%. Driver specifications Motor specifications Microstepping - ... more1, 2, 4, 8, 16. Inductance - 3.7 mH ±20%. Holding Torque - 1.9N·m (269oz·in).
Buy It Now
Free Shipping Condition: New Location: Dayton, United States · YAKO YKA2811MA. · Stepping Motor Driver. Stepping Motor Driver. · New In Box. New In Box.
Buy It Now
Free Shipping Condition: New Location: United States It can run independently as a module, or it can be used in conjunction with other systems. Adapted motor: stepper motor. Do not dismiss your dream. We ... morewill not take any such responsibilities. Input reverse connection protection: Yes.
Buy It Now
Free Shipping Condition: Used Location: Gilbert, United States Used Anaheim Automation step motor drive BLD75-1 Looks to be in very good condition
Buy It Now
Free Shipping Condition: Used Location: 구로구, South Korea Manufacturer : SANYO DENKI. It was removed from machine of good condition. But the parts has minor scratch and used marks. Review through the photo. Condition ... more: Used (good physical condition, this item is not tested Sold as is).
Buy It Now
$5.45 Shipping Condition: New Location: Addison, United States (And stepping motors) and switching power transistors. To simplify use as two bridges each pair of channels is equipped with an enable input. This device ... moreis suitable for use in switching applications at frequencies up to 5 kHz.
Buy It Now
$6.53 Shipping Condition: Used Location: El Paso, United States
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 36V/48V 350W Electric Bicycle E-bike Scooter Brushless DC Motor Speed Controller Product Feature: Voltage: 36V/48V Wattage: 350W Throttle : 1-4V Short ... morevoltage protect :31.5±0.5V/42±0.5V Color: silver Dimension: 105 x 70 x 35mm/4.13 x 2.76 x 1.38" Casing material: Aluminium How to use? Turn off the power before wiring. 1. Connect the learning switch. 2. Connect the motor wire(phase A, phase B, phase C). Then connect the hall plug. 3. Connect the power and the twist grip plug. .
Buy It Now
$20.49 Shipping Condition: Used Location: Grayslake, United States Shaft-1/4" (6.35mm ), 3/4 " Long, Multiple Lots Available.
Buy It Now
Free Shipping Condition: Used Location: Woodland, United States Used - See photos
Buy It Now
Free Shipping Condition: New Location: United States ♞【23HS8430 Nema23 Stepper Motor】Nema23 57 type;Step Angle: 1.8°; Current: 3.0A; Holding torque: 180N. 4× 23HS8430 Nema23 stepper motor 76mm 270oz-in 3A ... more1.8°. 23HS8430 Nema23 stepper motor. Suitable for Nema17 Nema23 two-phase/four-phase/four-wire/six-wire stepper motors which currently within 4.2A.
Buy It Now
Free Shipping Condition: Used Location: Gurnee, United States
Buy It Now
$8.67 Shipping Condition: Used Location: Noblesville, United States
Buy It Now
$2.99 Shipping Condition: New Location: China Description This module is blue PCB now.Please know it. The DRV8825 stepper motor driver carrier is a breakout board for TI's DRV8825 microstepping ... morebipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board. So it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting. Overcurrent and overtemperature protection, and six microstep resolutions(down to 1/32-step) It operates from 8.2– 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow(rated for up to 2.2 A per coil with sufficient additional cooling) 1）Simple step and direction control interface 2）Six different step resolutions: full-step. Half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step 3）Adjustable current control lets you set the maximum current output with a potentiometer. Which lets you use voltages above your stepper motor's rated voltage to achieve higher step rates 4）45 V maximum supply voltage 5）Built-in regulator(no external logic voltage supply needed) 6）Can interface directly with 3.3 V and 5 V systems 7）Over-temperature thermal shutdown. Over-current shutdown, and under-voltage lockout 8）Short-to-ground and shorted-load protection 9）4-layer. 2 oz copper PCB for improved heat dissipation 10）Exposed solderable ground pad below the driver IC on the bottom of the PCB 11）Module size. Pinout, and interface match those of our A4988 stepper motor driver carriers in most respects(see the bottom of this page for more information) This product is a carrier board or breakout board for TI’s DRV8825 stepper motor driver; we therefore recommend careful reading of the DRV8825 datasheet(1MB pdf) before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil(see the Power Dissipation Considerations section below for more information) Here are some of the driver’s key
Buy It Now
$20.00 Shipping Condition: Used Location: 구로구, South Korea Model Number : SD5107P3. Manufacturer : ORIENTAL MOTOR. It was removed from machine of good condition. But the parts has minor scratch and used marks. ... moreReview through the photo. Condition : Used (good physical condition, this item is not tested Sold as is).
Buy It Now
Free Shipping Condition: Used Location: Alta, United States PARKER COMPUMOTOR MODEL 500 INDEXER FOR STEPPER MOTORS.
Buy It Now
Free Shipping Condition: New Location: Richmond, United States Support set duty cycle. Support set frequency. Default display duty cycle. Support reverse connection protection. Soft start function.
Buy It Now
Free Shipping Condition: New Location: United States in titles& description 10x 10000W AC 220V SCR Digital Voltage Regulator Speed Control Dimmer Thermostat. X 10. Price for all: $164.64 You save $28.26 ... moreThis listing includes the following items Was $19.29 x 10 Price: $16.46 x 10 AC 220V 10000W SCR Digital Voltage Regulator Speed Control Dimmer Thermostat, The Thermostatusethe new two-way high power thyristor. Asthe current can up to 80A, it can solve the problem of over-current electric wire in case of cooling is too small to cause the resistance; And also it can easily adjust the output voltage of electricity in between 0-100% 220 of 100 volt regulator, nonlinear) Specifications: Operating Voltage: AC 220V, Maximum Power: 10000W, Max Current: 80A, Application: Electric furnace. Water heater, lamps, small motor, electric iron etc. How to use: Connect this device with lamp or home appliance or electric circuit. Then rotate the knob for dimming, speed, voltage, temperature control. Package Includes: 1 x SCR Voltage Regulator Speed Control Dimmer Thermostat(include accessories) 14_T071619095820 The buyer is responsible for any applicable import duties and local taxes. Please verify with your customs before making your purchase. Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses. $8.38. Buy It Now Free Shipping. $54.19. Buy It Now Free Shipping. $2.49. Buy It Now Free Shipping. $9.29. Buy It Now Free Shipping. $9.29. Buy It Now Free Shipping. $9.29. Buy It Now Free Shipping. $9.29. Buy It Now Free Shipping. $9.29. Buy It Now Free Shipping. $3.65. Buy It Now Free Shipping. $23.99. Buy It Now Free Shipping. $4.99. Buy It Now Free Shipping. $23.99. Buy It Now Free Shipping. $4.99. Buy It Now Free Shipping. $2.99. Buy It Now Free Shipping. $4.29. Buy It Now Free Shipping. $19.29. Buy It Now Free Shipping. $3.79. Buy It Now Free Shipping. $7.02. Buy It Now $14.99. Buy It Now Free Shipping. $2.79. Buy It Now Free Shipping.
Buy It Now
$5.00 Shipping Condition: New Location: China The drive current is automatically halved.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 36V/48V 350W Electric Bicycle E-bike Scooter Brushless DC Motor Speed Controller Product Feature: Voltage: 36V/48V Wattage: 350W Throttle : 1-4V Short ... morevoltage protect :31.5±0.5V/42±0.5V Color: silver Dimension: 105 x 70 x 35mm/4.13 x 2.76 x 1.38" Casing material: Aluminium How to use? Turn off the power before wiring. 1. Connect the learning switch. 2. Connect the motor wire(phase A, phase B, phase C). Then connect the hall plug. 3. Connect the power and the twist grip plug..
Buy It Now
Free Shipping Condition: Used Location: South Korea
Buy It Now
Free Shipping Condition: New Location: United States Model: TB6600. It is an updated version of TB6600 4A stepper motor driver. Feature: 1. Original stepper motor driver chip, the current is selected by ... moreDIP switch. Item Type: Stepper Motor Driver. Powerful anti-high frequency interference ability, and overheating, overcurrent, short circuit protection.
Buy It Now
Free Shipping Condition: Used Location: Boulder, United States Hardware appears to be in good condition, but is untested. If you have.
Buy It Now
$6.25 Shipping Condition: Used Location: El Paso, United States 5.0000 x5.0000 x2.0000.
Buy It Now
Free Shipping Condition: New Location: China Acceleration and deceleration: Yes. Suitable motor: stepper motor (single axis). Command characteristic: streamline and optimize multiple commonly used ... moreinstructions. The module has built-in multiple fixed operation modes, and the user can quickly select the appropriate motion trajectory.
Buy It Now
$5.55 Shipping Condition: New Location: Dublin, United States 42mm 57mm NEMA23 Stepper Stepping Motor Handwheel Hand Carved Shaft: 5mm Shaft Diameter: 5mm For 42mm/57mm stepper motor Shipping Options: Domestic Shipping(US) ... moreWe will ship via the United States Postal Service(USPS) Fedex and UPS. UPS/Fedex does not deliver to PO Boxes. If your shipping address is a PO Box, you must select a USPS option or your package will be returned to us. We do not accept C.O.D. orders. We are not responsible for stolen packages. International Shipping: We will only ship via the USPS for any shipping address outside of the United States: USPS First-Classe Mail international- Usuallty it will take about 2-3 weeks for devliery. Can take up to 6 weeks or more. NO tracking and NOT insured. In the case a package is lost in transit. We are not responsible for replacing the order. Usually the package won't lost if your provide a correct shipping address. USPS Priority Mail international- Usually it will take about 1-2 weeks for delivery. But it can vary depending on your country's custom or local post office. Tracking number is avaiable for this shipping method. USPS Express Mail international- The fastest and safest way. Tranking number is available and package is insured.$100) UPS tracking numbers may not be trackable until later in the evening when packages reach the shipping center. In rare cases it may take up to 24 hours for the package to be trackable. Unfortunately. USPS does not yet provide any online/live tracking options for their packages. Only a delivery confirmation number can be provided along with a shipment notification. Please note that USPS has difficulty tracking international packages. Your USPS delivery confirmation number may or may not provide any useful information. You may pay by any of the following methods. United States funds only. We do not accept C.O.D. orders. We accept Visa and MasterCard. In order to help prevent payment fraud. We may need to hold your order for further verification. If you select PayPal during checkout. You will be redirected to that
Buy It Now
$13.60 Shipping Condition: New Location: Ridgefield, United States JMC 2 phase Nema 17 23 hybrid stepper motor driver 2DM542-N. Driver 2 phase step motor with 4leads,6leads and 8leads. Output Current (Peak). Logic Input ... moreCurrent. Storage Temp. New 32-bit DSP technology.
Free Shipping Condition: New Location: China 1PCS Stepper Motor Driver Module. If limit reversal is required, two limit switches can be connected to the P3 pin. Normal mode 2: S1 forwards the start ... morebutton, S2 reverses the start button, press any button to stop.
Buy It Now
Free Shipping Condition: New Location: United States Two modes can be selected:PWM mode-frequency (continuous), duty cycle. 1 x PWM generator. Positive and negative pulse width length: 0.000s-9999s, the ... moreminimum can be set 1ms. Frequency range:1Hz~150KHz, accuracy about 2%.
Buy It Now
$9.99 Shipping Condition: Used Location: Goffstown, United States Lead Wires6. Motor Type2-Phase. InsulationClass B 266ºF (130ºC.). Inductance(mH/Phase): 4 1.
Buy It Now
$13.61 Shipping Condition: Used Location: Rigby, United States In the case of the 430-PTO, an oscillator card is provided. Power input is 120 Volt AC. SLO-SYN 430-PTO Translator Motor Drive. This is a used untested ... moreitem.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Input Voltage : 220V Output Voltage : 208-240VAC ( analogous to Input Voltage ) Input Frequency : 48-63 Hz Output Frequency : 0-400 Hz ... moreInput Phase : 1 or 3 phase as you like Output Phase : 3 phase Control Mode : SPWM Input Power : 220V class：220±15% Working Temperature : -10~40 ℃ Humidity : 0-95% Relative Humidity (without dew) Vibration : Below 0.5G Feature:.
Buy It Now
Free Shipping Condition: Used Location: Baroda, United States If you are not able to pick up locally, we are able to get competitive freight quotes as well.
|
|
|
|
Vexta 5 phase stepping motor a6445-9215k-a4 2.2A .43ohms .72°step pr4rf
Vexta 5 phase stepping motor a6445-9215k-a4 2.2A.43ohms.72°step Inventory Location: pr4rf Please leave positive feedback we will do the same for you Thank you for contacting Quality Manufacturing Services Inc. If you have any questions? Please do not hesitate to call us in San Diego. Best regards, Terms and Conditions You are purchasing a USED ITEM. The item appears to be in good physical condition and it came from a working environment however we do not have the facilities or in some instances the knowledge to thoroughly test the item. All items are sold AS IS and listed measurements(Length. Width, Height, Weight) are approximations. Our RETURN POLICY is to fully refund your purchase price if you meet the following: 1. You advise us within seven days of receipt of the item that you intend to return it AND 2. You effectuate the return ... morewithin 14 days from receipt of the item AND 3. You pay for the return shipment. We are firm on this policy. We ship economy/ground USPS. FedEx or UPS unless otherwise requested and paid for by purchaser. We also will ship via YOUR FedEx or UPS account if so requested. If freighting is required we will arrange for the freight company or will work with the freight company you designate. All freighted items are F.O.B. meaning our liability for the freighting ends and yours begins as soon as the item is properly loaded onto the freighting company’s truck or other transportation entity. Shipping/freighting insurance. If desired, is your(Purchaser’s) responsibility both to arrange and pay for. In the event a package is received damaged, you(the Purchaser) are responsible for initiating the claim and for keeping all original boxing and packaging so the carrier can inspect and properly initiate the claim. We accept payment in the following forms: Pay Pal. Credit Card, E-check, Wire Transfer. We do not ship C.O.D. SHIPPING OPTIONS: We offer several options for delivery. Pick up at our location in San Diego is free. We will deliver to the surrounding area for a reasonable fee. If you
|
|
|
Pacific Scientific Sigmax 8.1 A Step Stepper Motor E32NCP-LDN-NF-00 Class B
Pacific Scientific Sigmax 8.1 A Step Stepper Motor E32NCP-LDN-NF-00 Class B. Used WYSIWYG We never warranty calibration. Payment must be made within 3 days of the close of the auction. THERE IS NO PICK UP ONLY SHIPPING FOR THIS UNIT. WE WILL COMBINE SHIPPING WHEN POSSIBLE. BY BIDDING YOU CONFIRM THAT YOU HAVE READ. UNDERSTAND, AND AGREE TO OUR SALES TERMS. So be sure to email your questions before bidding. We strive for all 5 stars in Detailed Seller Ratings! by adding my eBay Store to your Favorites Check out my! Payment: Payment is required with in three days of the end of the auction. We accept the following payment methods: Paypal Credit Cards up to $2500.00(AMEX. MC, VISA) from US purchases only NO WIRE TRANSFERS~NO EXCEPTIONS Colorado residents pay state sales tax. 2.9% Shipping: We will ship your item within 5 days after I receive ... moreyour payment. Because we want your item to get to you in the same condition we send it. We are proud to ship products using Insured FedEx for your continuous US shipments. If you are a territory of the US. Hawaii or Alaska please email for a shipping quote, the posted amount does not apply to you. You will receive a tracking number directly from FedEx There is no pick up. No exceptions. We are not a retail outlet. All purchases over $100.00 inside the continental US will be insured at no additional charge. To insure there are no delays in your delivery. Please include your phone number in your Ebay address profile. We do not ship to PO Boxes. We cannot ship any item over 75lbs to a residential address. If the customer cancels after completion of the auction there will be a $20 charge, If you require a signature for your delivery. Please inform us BEFORE you pay your invoice because there is an extra charge by FedEx for this service. International Buyers MUST READ BEFORE BIDDING: IF YOU LIVE OUTSIDE THE CONTINUOUS US YOU MUST EMAIL AMELIA WITH YOUR COUNTRY. POSTAL CODE AND CITY TO GET A CORRECT SHIPPING AND HANDLING QUOTE BEFORE BIDDING We will not alter the sale price for
|
|
|
5/8" Bore -3- STEP - 1/2" V Belt - POWER TOOL / MOTOR PULLEY - Part - SHIPS FREE
5/8" Bore-3- STEP- 1/2" V Belt POWER TOOL/ MOTOR PULLEY Price Includes Shipping! We have for your consideration a 5/8" Bore-3- STEP- 1/2" V Belt- POWER TOOL/ MOTOR PULLEY. Pulley would appear to in average vintage condition. P lease refer to ALL the pictures for measurements. Pulley measures 2" across top& 3-3/8" across bottom. Pulley will need cleaning. What can we say- please take a good look at all(12) pictures. Please note: there are no other items and/or attachments of any sort included in the sale- what you see is what you are getting" The" 3-step pulley" is used and does show wear- scratches- marks- tarnish& staining- in addition there are some nicks on the flanges of the pulley; fr om normal use(see pics) please note: the top pulley outside flange is somewhat bent in a couple of ... moreareas(see pics) we only mention this for accuracy as it does not detract from the usefulness of the part. Normal 0 false false false EN-US X-NONE X-NONE Just a reminder- what you see is what you are getting- and once more- Price Includes Shipping! Normal 0 false false false EN-US X-NONE X-NONE Please look at the pictures carefully and do not hesitate to ask questions before bidding. Thanks for doing business with us! Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 OK. Time for the LARGE Fine Print: In the interest of making this a very pleasant experience for everyone. We would respectfully ask that all potential bidders read the below statements. 1) We respectfully ask that all winning bidders pay for their purchase using Paypal within 3 days of the auctions ending or immediately if a“buy-it-now” item is purchased. 2) Winning bidders live in the United States and your item purchased will be shipped to the same address you listed for Paypal. 3) We ONLY ship within the lower 48 continental United States. No exceptions. We ship items within 3 business days after payment has been received. 4) Return Policy: Sorry NO Returns on this item. Being sold strictly“
|
|
|
Pacific Scientific Powermax II Step Motor P21NRXB-LSS-NS-05 hb84011 2.3A/4.6
Description: 1. One Pacific Scientific Powermax II Step Motor P21NRXB-LSS-NS-05 hb84011 2.3A/4.6 IN good condition. note the pulley on the shaft can be removed 2. Selling as shown in the picture. No other accessories included. 3. 15 days warranty. Payment: 1. We accept PayPal and also Visa/Master card. American Express and Discover through PayPal service. 2. We only ship to PayPal confirmed address. A PayPal payment with unconfirmed address will be rejected. 3. Rejected payment MUST be received within 7 days of the purchase date from a confirmed address. Failing in the auction will result a Non-Pay Bidder alert with eBay to recover closing fees of the auction. Shipping Methods: 1. We ship to all 48 States in Domestic United States via USPS or FedEx. 2. Please allow 1- 2 business days for the item to be shipped after the purchase is made. ... more3. Shipping only to lower 48 US States only. We do not ship to Alaska. Hawaii, and Puerto Rico 4. We are NOT responsible for the missing or damage during shipping if customer choose not to add insurance in the shipping cost. 5. Some shipping service such as USPS may not provide the most up to date tracking information or door to door tracking or any tracking until the item is delivered L International Shipping: 1. We don’t ship to any international address. Return Policy: 1. We offer 15 days warranty. If the item is not working within 15 days since the purchase. Customer may return the item in the same condition as we sent out. 2. We accepted return within 15 days after item arrival. Depending on customer needs we provide money back or exchange the item. Return shipping cost is responsibility of the buyer. 3. Shipping charges are not refundable. Contact Us: If you have any concerns or questions. Please feel free to contact us and we will get back to you as soon as possible.
|
|
|
3 step Motor Pulley 5/8"" Bore Wood Lathe Pot Metal or Alloy 2" 3" & 4" OD
This is a Heavy Pot Metal or alloy 3 step Motor pulley from a wood lathe Motor It has a 5/8"bore with key way diameter bore takes 1/2" wide belts is about 2" thick. The outside step diameters are about.2"3" 4" Mounts with a set screw Minor wear and tear rust and dust but good working shape! Local pick-up available I will combine shipping when practical on multiple purchases. Please complete bidding then request a combined invoice. 14
|
|
|
4 step Motor Pulley 5/8"" Bore -- Sears Craftsman 12" Wood Lathe #113-23800
This is a Heavy Pot Metal or alloy 4 step Motor pulley from a 12" Sears Craftsman wood lathe Model# 113.23800 with a 2 1/4" tubular bed. It has a 5/8" with key way diameter bore takes 1/2" wide belts is about 2 1/2" thick. The outside step diameters are about.2"2 3/4"3 1/2" 4" It has a bushing in the bore adjusting to 1/2"can be removed. Mounts with a set screw Minor wear and tear rust and dust but good working shape! Local pick-up available I will combine shipping when practical on multiple purchases. Please complete bidding then request a combined invoice. 14-009 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-14475a026cd-0x104-
|
|
|
Stepping motor assortment - Vexta, Step-Syn, 7 Total
Stepper motor assortment. 7 motors total, 2 Vexta, 5 Step-Syn All removed from functioning equipment and in good shape. May be returned if not fully satisfied. Free shipping. Includes: 1) Vexta C6353-9212K 2) Vexta PX533M-A-C21 3) Step-Syn 103G771-0442 4) Step-Syn 103G771-0443 5) Step-Syn 103G771-0444 6) Step-Syn 103G775-1252 7) Step-Syn 103G775-1252(same model as#6)
|
|
|
TWO Shinano Kenshi STP42D208 -02 Stepper Motor 1.8DEG/STEP 2.6V 1.2A AX050089A
TWO Shinano Kenshi STP42D208-02 Stepper Motor 1.8DEG/STEP 2.6V 1.2A AX050089A MOTORS CAME FROM WORKING MACHINES AND ARE GUARANTEED NOT TO BE DOA. YOU ARE BUYING BOTH MOTORS SHOWN THANK YOU AND BEST OF LUCK
|
|
|
Mitsumi 7.5s, M49SP-2K, 6.4Ohm STEPPING MOTOR, RH7-1473, 7.5°Step
Mitsumi Stepping Motor 7.5° Step. 6.4Ω Great Working Condition If you have any questions please let me know
|
|
|
Vexta Stepping Motor PK245-03AA-C4 2-Phase 1.8Deg/Step 12VDC 0.4A
Vexta Stepping Motor PK245-03AA-C4 2-Phase 1.8Deg/Step 12VDC 0.4A You are bidding on used: Vexta Stepping Motor PK245-03AA-C4 2-Phase 1.8Deg/Step 12VDC 0.4A Oriental Motors. Japan Vexta Stepping Motor PK245-03AA-C4 2-Phase 1.8Deg/Step 12VDC 0.4A RW7 00194 For informations: This Item Is For Sale As Is My Policies: Please note that most items are not Tested so the item condition is unknown and not guaranteed unless described otherwise. All items are for sale AS ARE! If for any reason you are not satisfied with your purchase please contact us immediately by Email or Phone. Before contacting eBay Resolution center/ Leaving Feedback! If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! PAYMENT PayPal ... morePayment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. SHIPPING Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. There is NO extra charge for packing materials or"handling" unless specified in the item description above. PLEASE NOTE: I reserve the right to refuse to ship items to"unconfirmed" PayPal addresses. We are shipping all items by Post Office's Air Mail/ EMS/ UPS- depends on weight. Buyer can choose his prefered way of shipping- but has to pay for it. We are responsible for any D.O.A. issues. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depends on the Post office and custom. If you haven't receive your item within 26 business days after making the payment please contact us immediately. Be note. When leaving us the seller rating on eBay, shipping time is NOT a delivery time! Delivery time depends
|
|
|
RORZE 2P MICRO STEP DRIVER RD-323MS WITH A MOTOR SANYO DENKI RORZE TYPE RM2690S
USED. TESTED WORKING Free shipping Worldwide. By FedEx or EMS) RORZE 2P MICRO STEP DRIVER RD-323MS MOTOR SANYO DENKI RORZE TYPE RM2690S“ SELL AS IS” the Item may have some scratch or stain from previous use. Free Shipping worldwide After the payment cleared. The item will be shipped right away except in Sunday and holidays of FedEx J For most of countries. The carrier will be FedEx. But for Russia. Ukraine and the other countries of“Commonwealth of Independent States” and In Asia, China will be shipped by EMS due to the difficulties going through customs. The Winning bidder needs to correct the contact numbers and shipping address before bidding. Or just email us the latest version of the information after winning the item(s) The international bidders are responsible for any Customs. Duties and All Fees to be asked by customs or brokers. ... morePayment Payment must by received prior to shipping by PayPal Only Return Policy Due to the mature of electronic components. We are not able to offer warranty or to accept returns. Thanks for visiting. Ph- CLICK HERE! TO VISIT OUR STORE TO SEE MORE INTERESTING ITEMS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
RORZE 2P MICRO STEP DRIVER RD-021M8 WITH STEPPING MOTOR PK243A1-SG18
USED. TESTED Free shipping Worldwide. By FedEx or EMS) RORZE 2P MICRO STEP DRIVER RD-021M8 MOTOR VEXTA PK243A1-SG18 Note) the total stock is 3. three have different surface color. if you purchase one of them. It will be shipped at random. SELL AS IS” the Item may have some scratch or stain from previous use. Free Shipping worldwide After the payment cleared. The item will be shipped right away except in Sunday and holidays of FedEx J For most of countries. The carrier will be FedEx. But for Russia. Ukraine and the other countries of“Commonwealth of Independent States” and In Asia, China will be shipped by EMS due to the difficulties going through customs. The Winning bidder needs to correct the contact numbers and shipping address before bidding. Or just email us the latest version of the information after winning the item(s) The international ... morebidders are responsible for any Customs. Duties and All Fees to be asked by customs or brokers. Payment Payment must by received prior to shipping by PayPal Only Return Policy Due to the mature of electronic components. We are not able to offer warranty or to accept returns. Thanks for visiting. Ph- CLICK HERE! TO VISIT OUR STORE TO SEE MORE INTERESTING ITEMS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Food truck 1995 aluminum step-van, diesel motor
Make your own custom food truck. Or mobile kitchen. All aluminum step van with Cummins Diesel engine, comes with a brand new service window, have 2 fryers, 3' or a 4' griddle, 2 bay steam-table, and cabinet with 3 bay sink and hand sink. make the food truck of your dreams. We have other equipment that maybe available at additional cost. Needs battery. Located in south eastern mass.
|
|
|
3 Oriental Motor Model PH266L-01B Vexta Stepping Motor 2-Phase 1.8/STEP
3 Oriental Motor Model PH266L-01B Vexta Stepping Motor 2-Phase 1.8/STEP, sell as is. See pictures for more detail. Price is for all 3 units. We describe the items and the condition as best as we can. If there are any questions or you need more info, please contact us and we will reply the same day. No other accessory are being sold with the item(Cables, manuals, Software, etc. unless it is mentioned in the description and sh own in the picture. We do not have the capability to test these equipment. These are un-tested and we sell as is. see pictures for more detail. Farmon Inc. sell all equipment with no warranty expressed or implied regardless of condition. Farmon Inc. don’t have capability to verify this equipment. All sales are"As is and Where is" and are final with no returns or exchanges permitted. Farmon Inc. invites you to ... moreinspect products prior to purchase please email us at info@farmoninc.com or call us at 510-573-0047 to schedule a time. Please read our rules before buying our products. Buyer responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Buyer pays actual shipping charges using your UPS or FedEx account. There will be a $0 handling fee for US and $0 for international for this item. Please allow 5 business days for us to ship after payment is received! All Buyers are welcome to come and inspection the equipment before purchasing them. Please email or contact us. Buyer must sign shipping confirmation when item delivered. All sales are Final and No return are Accepted. We are also interested to buy your unwanted excess inventory. Please call us to review and remove your inventory. We can sometimes do in the same day. Brand we can support. Please check our inventory: We supply many other semiconductor components. Equipment, RF Generator, Chiller, Turbo, Cryo pumps, MFC, Vacuum pumps and controllers, step motors and drivers, etc. Entran Entrelec Schiele Equipe PRI Equipe Technologies Erecta ESA ESC Estek ETA ETEC Systems ETEL ETO
|
|
|
Vintage Shopsmith 10ER parts - 3 step motor pulley I.D. 5/8"
today I am listing a bunch of parts from an old 10ER. All are used and may have nicks, scrapes etc, some might have minor rust, they come as shown, please click on the pics to enlarge. Please check out the different shipping options. The lowest does not always show up as economy on the ebay page. I will combine shipping on multiple items. It is not automatic, please wait til I send a revised invoice(usually the next morning) before paying. Shipping is per ebay calculator per weight. I do not add any for handling. Packaging nor any other reason. Ships to United States only. 3-1-6.
|
|
|
ORIENTAL MOTOR VEXTA PH266M-E1.2 2-PHASE STEPPING MOTOR 6VDC 1.2A .9-STEP
ORIENTAL MOTOR VEXTA PH266M-E1.2 2-PHASE STEPPING MOTOR 6VDC 1.2A.9-STEP GUARANTEED TO WORK OR YOUR MONEY BACK! UP FOR SALE IS AN ORIENTAL MOTOR VEXTA PH266M-E1.2 2-PHASE STEPPING MOTOR 6VDC 1.2A.9-STEP. PLEASE VIEW THE PICTURES BELOW TO SEE THE ACTUAL ITEM/S YOU ARE BUYING. ONLY WHAT IS PICTURED IS INCLUDED. IF IT IS NOT PICTURED. IT IS NOT INCLUDED. Please view Our eBay auctions for plenty more equipment. Save on Shipping Local pickups are free and welcome! International Buyers We may allow international purchases for certain items Buying Terms: Do not assume anything. If the description is not clear enough. Please let us know. Please ask any questions you may have BEFORE buying. On rare occasions we reserve the right to substitute an equivalent item(same exact model) instead of the actual one pictured. Guarantee Terms: This item is guaranteed. ... moreIf it does not perform as described above. You may qualify for a refund. In such a case, you must contact us within 5 days of delivery. Return shipping is at the buyer's cost and is the buyer's responsibility. Return Policy: Read the description and view the pictures thoroughly. If anything is unclear. Simply email us and ask questions before buying. If you purchase an item in error, you may return it provided you contact us within 5 days of delivery. You will be refunded the purchase amount, less a 10% restocking fee. We cannot refund shipping due to customer error. Payment Terms: Payment is due within 7 days. If paying with PayPal. Your order must ship to the exact address on your payment. Shipping Terms: Shipping quoted is for shipping and handling in the Continental U.S. only(excludes Alaska and Hawaii) Most Orders will ship via FedEx. Some times we use other methods such as USPS. Only orders totaling $250 or more will require signature upon delivery. Most items ship within 2 business days. Local pickups at our Maryland facility are more than welcome. International Buyers: We may allow international purchases for certain item
|
|
|
VEXTA UPH599H-A 5-PHASE STEPPING MOTOR DC 2.8A .72/STEP CNC 3D PRINTER JAPAN
VEXTA UPH599H-A 5-PHASE STEPPING MOTOR DC 2.8A.72/STEP CNC 3D PRINTER JAPAN GUARANTEED TO WORK OR YOUR MONEY BACK! UP FOR SALE IS A VEXTA UPH599H-A 5-PHASE STEPPING MOTOR DC 2.8A.72/STEP CNC 3D PRINTER JAPAN. PLEASE VIEW THE PICTURES BELOW TO SEE THE ACTUAL ITEM/S YOU ARE BUYING. ONLY WHAT IS PICTURED IS INCLUDED. IF IT IS NOT PICTURED. IT IS NOT INCLUDED. Please view Our eBay auctions for plenty more equipment. Save on Shipping Local pickups are free and welcome! International Buyers We may allow international purchases for certain items Buying Terms: Do not assume anything. If the description is not clear enough. Please let us know. Please ask any questions you may have BEFORE buying. On rare occasions we reserve the right to substitute an equivalent item(same exact model) instead of the actual one pictured. Guarantee Terms: This item is ... moreguaranteed. If it does not perform as described above. You may qualify for a refund. In such a case, you must contact us within 5 days of delivery. Return shipping is at the buyer's cost and is the buyer's responsibility. Return Policy: Read the description and view the pictures thoroughly. If anything is unclear. Simply email us and ask questions before buying. If you purchase an item in error, you may return it provided you contact us within 5 days of delivery. You will be refunded the purchase amount, less a 10% restocking fee. We cannot refund shipping due to customer error. Payment Terms: Payment is due within 7 days. If paying with PayPal. Your order must ship to the exact address on your payment. Shipping Terms: Shipping quoted is for shipping and handling in the Continental U.S. only(excludes Alaska and Hawaii) Most Orders will ship via FedEx. Some times we use other methods such as USPS. Only orders totaling $250 or more will require signature upon delivery. Most items ship within 2 business days. Local pickups at our Maryland facility are more than welcome. International Buyers: We may allow international purchases for certain
|
|
|
Vexta stepper motor 2 phase 0.9 degree step
This is a 2 phase stepper motor. 0.9 degree step. Model number ph264-31-c26 dc 4v 1.1a. It was pulled from a large comercial printer. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14481df7112-0x101-
|
|
|
Walker Turner Drill Press 4 Step 5" Motor Pulley 5/8" Bore Delta Milwaukee Atlas
Here we have a 4 step motor pulley from a Walker Turner drill press. 5/8" bore. As you can see in the pics. She's in great shape- no chips, cracks, or breaks. Dual set screws in the second smallest step. Outer measurements of steps are 1 3/4" 2 13/16" 4" 5" Posted with
|
|
|
KH42KM2B036 Cool Muscle Step Motor / driver integrated AC Servo Lot of 3
Specification Model Number: KH42KM2B036 ITEM Type: Driver integrated stepping motor Manufacturer: Muscle Corporation. Country Of Origin: Japan. Quantity: 1 SET(Lot of 3) Condition: Us ed Sold as is. This item removed from working condition. There is some scratch and used marks. A ccessories: none Shipping Notice: We Use shipping address by PAYPAL Information. Also let us know your contact number(phone or mobile number) for accurate delivery. Or you check your shipping address and information before you buy. delivery address and PAYPAL address should same) This item will be shipped via FEDEX economy service or e quivalent shipping service(UPS. DHL, EMS) It usually takes 5 to 10 days to deliver. Sometimes it takes more than usual. Please understand it depends on the customs and carrier of your country. But please don't worry. Most of the ... moretime it is delivered on time. we serve to you free shipping service. But you should consider duty and tax. If you don't want FEDEX.UPS,DHL shipping, please let us know. If you must delivered on time. Please ask us before buying. It can be shipped more faster ship method that add ship payment. P riority FEDEX.UPS,DHL) You can find shipped information at EBAY site or" http:www.track-trace.com/post" when EMS: without" Track Number. Depending on the country. The track information of the Post office can't display. Tax Policy: Buyer's duty International Buyers(include US customers) Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Business and Shipping Hours: 9am to 6pm(UCT/GMT+9hour) Monday to Friday. We are closed on Weekends and all major Korea holidays. Compare the time of Korea and your Country. Current Korea Time: Available Shipping Hours: 9am to 2pm(Post Office available Working Day- Monday ~ Friday) Feedback: Your satisfacti
|
|
|
Vexta PH266-01GK Step Stepping Stepper Motor
This is a USED motor from Oriental Motors. Has small cosmetic defects(dents. Scratches) Very hard to find motor ready for installing on gear head. This motor has a shaft(see the picture) that allows to work with gear head like 2GKxKA from Oriental Motor. It was removed from the testing fixture and it is in working condition. Here are some details: manufacturer: Oriental Motors- origin: Made in Japan- size: 56mm. NEMA 23- step angle: 1.8 deg( 200 steps/revolution) holding torque: 83 oz-in(0.59 N-m) unipolar- voltage: 36V unipolar- current: 1.2A unipolar- inductance: 8mH unipolar- leads: 6 wires(some motor have shorter wires as the plug was cut off) Data sheet is available from here This 2-phase stepper motor with 6 wires works with all type of stepper drivers: unipolar and bipolar. Here is the driver you might be interested in: This motor ... morewill not last long at this price so please hurry up and don't wait with purchasing. Don't forget the L Mounting Bracket for Nema 23 motors we have listed here on other auction. Please. Check our eBay store for more motors, drivers and power supplies: INTERNATIONAL BUYERS! Please request an invoice before sending a payment. We ship to overseas destinations via USPS International Priority Mail NOTICE: Buyers with feedback score(5) or less please do NOT bid/purchase without contacting us first. Any such transaction will NOT be accepted. PLEASE CONTACT US FIRST! ANY QUESTION: Send email to On Jun-08-11 at 05:03:35 PDT. Seller added the following information: Use the FREE Counters 1 million sellers do- Vendio!
|
|
|
Applied Motion Products PD2035 Step Motor Driver - TWO Available!
Applied Motion Products PD2035 Step Motor Driver Applied Motion Products PD2035 Step Motor Driver. As pictured- what you see is what you get. Two available- buy one or both! Each unit will come with a copy of the user's manual. These units were working when removed from service. Because they can be damaged by improper hookup. They are sold in as-is condition with no warranty. But they DO work! Sorry. We ship ONLY to the contiguous 48 continental United States, and do NOT ship to APO, FPO, or PO Box addresses. Sorry! Please do NOT bid if you are outside our delivery area! CHECK MY FEEDBACK!
|
|
|
VEXTA 5 PHASE 0.72deg STEP STEPPING MOTOR PK596AW (S14-3-65G)
This is a VEXTA 5 PHASE 0.72deg STEP STEPPING MOTOR. PN: PK596AW GUARANTEED TO BE IN WORKING ORDER UPON ARRIVAL. PLEASE DISREGARD THE NUMBERS IN PARENTHESES AT THE END OF THE DESCRIPTION IN THE TITLE. THESE ARE FOR OUR INTERNAL REFERENCE. WE OFFER A 14 DAY RIGHT OF RETURN. We accept Paypal. Payment must be made within 3 days of item ending. We take great care in packaging your products and use only the best materials. We usually ship USPS for smaller domestic shipments. For larger items. We use FedEx or UPS. We also ship freight for very large and heavy items. In order to give you the lowest possible rate, we combine shipping charges on multiple orders. WE SPECIALIZE IN INTERNATIONAL SHIPPING. International Shipping rates will be higher than the rate posted here. Please contact us for international rates. All items are guaranteed to be in ... moreproper working order upon arrival. Unless specified otherwise in the description. We have been in the Industrial and manufacturing supply field for over 7 years and take pride in providing our customers with THE BEST CUSTOMER SERVICE. We do our best to describe everything. If you have questions. Please feel free to email us. We strive hard to make sure our customers are happy. We use the appropriate packaging materials that are necessary when packaging your items. We hope that you will find your purchase satisfying. If by chance there is an issue with your item, please let us know right away. We are always ready to address any concern. Powered by
|
|
|
5/8" Bore-4-STEP-1/2" V Belt - Drill Press POWER TOOL / MOTOR PULLEY -Part-
5/8" Bore-4- STEP- 1/2" V Belt POWER TOOL/ MOTOR PULLEY Price Includes Shipping! We have for your consideration a 5/8" Bore-4- STEP- 1/2"V Belt- POWER TOOL/ MOTOR PULLEY( no key) Pulley would appear to in average vintage condition. P lease refer to ALL the pictures for measurements. Pulley measures 1-3/4" across top& 4" across bottom. Pulley will need cleaning. What can we say- please take a good look at all(12) pictures. Please note: there are no other items and/or attachments of any sort included in the sale- what you see is what you are getting" The"4-step pulley" is used and does show wear- scratches- marks- tarnish& staining- in addition there are some nicks on the flanges of the pulley; fr om normal use(see pics) we only mention this for accuracy as it does not detract from the usefulness ... moreof the part. Normal 0 false false false EN-US X-NONE X-NONE Just a reminder- what you see is what you are getting- and once more- Price Includes Shipping! Normal 0 false false false EN-US X-NONE X-NONE Please look at the pictures carefully and do not hesitate to ask questions before bidding. Thanks for doing business with us! Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 OK. Time for the LARGE Fine Print: In the interest of making this a very pleasant experience for everyone. We would respectfully ask that all potential bidders read the below statements. 1) We respectfully ask that all winning bidders pay for their purchase using Paypal within 3 days of the auctions ending or immediately if a“buy-it-now” item is purchased. 2) Winning bidders live in the United States and your item purchased will be shipped to the same address you listed for Paypal. 3) We ONLY ship within the lower 48 continental United States. No exceptions. We ship items within 3 business days after payment has been received. 4) Return Policy: Sorry NO Returns on this item. Being sold strictly“as-is” Special Note: If you have a feed back score of LESS than“ 5” please contact me
|
|
|
4 Step Motor Pulley Heavy Steel @ 1/2" bore from Central Machinery Wood Lathe
This is a Heavy Steel 4 step Motor Pulley from a Central Machinery Wood Lathe made in China. Overall about 2 1/8" thick takes 3/8" belts the outside diameter of the steps are ABOUT 1 9/16"2"2 3/8"2 3/4" The bore is About 1/2" OR metric equavalent Mounts with a set screw. In good working condition lightly rusted some dirt and dust wear and tear Local Pick-up available I will combine shipping on multiple purchases when practical. Please complete bidding then request a combined invoice. 362014
|
|
|
3 Step Motor Pulley 5/8" Bore with keyway 1 3/4" thick from 12" Delta Wood Lathe
This auction is for a Heavy Pot Metal or Alloy 3 step Motor Pulley as pictured. It came with a 12" Delta Wood Lathe with a cast Iron bed with a 1 1/2" gap between bed rails It says 146. Takes@ 1/2" wide belts. The outside diameter of the steps are about.2 1/4"3" 3 3/4" Some wear and tear rust and dust and dirt but in good working condition. Local Pick-up available. I will combine shipping on multiple purchases when practical. please complete bidding then request a combined invoice. 14-010.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-1449fc2d714-0x109-
|
|
|
S19A09 JIT Manufacturing 1.8 Deg Step Motor Encoder 1000 Line 466077/AG USED
JIT Manufacturing 1.8 Deg Step Motor Encoder 1000 Line 466077/AG DESCRIPTION Item is USED and in GOOD cosmetic condition with normal wear from use. AUCTION INCLUDES JIT Manufacturing 1.8 Deg Step Motor Encoder 1000 Line 466077/AG AUCTION DOES NOT INCLUDE Original Packaging Manual WARRANTY INFORMATION 30-Day Hassle-Free DOA Warranty! CONTACT US Store hours: Monday- Friday 7AM- 4PM Central Time Closed: Saturday& Sunday. We are also closed on holidays. Address: 11543 S. Memorial Parkway Huntsville. AL 35803 PAYMENT Payment is due within 7 days of the auction's close. Payment is only accepted by PayPal and eCheck payments Before paying. Ensure both your eBay Ship To address is the same as your PayPal Ship To address. Local pickup fee is $10.00. BUYERS MUST PICKUP LOCAL ITEMS WITHIN 10 BUSINESS DAYS OF PAYMENT* SHIPPING We ship within ... morefive business days from the day of your Cleared Payment! Once your item has shipped the tracking information will be available in your eBay account. We only ship within the 48 contiguous states in America. WARRANTY If your item is covered under our 30-Day DOA Warranty. You may return this at anytime within 30 days. Buyer pays return shipping! We will provide a full refund for the original sale price. This does not include shipping fees. When bidding on an item that is'SOLD AS IS' please take notice that this item has NO warranty and we will not be able to provide you with a refund.
|
|
|
VEXTA GEARED STEP MOTOR PMM33B-MG30 0.024 DEGREE PRE STEP
USED. Free shipping Worldwide. By FedEx or EMS) VEXTA GEARED STEP MOTOR PMM33B-MG30 0.024 DEGREE/ STEP“ SELL AS IS” the Item may have some scratch or stain from previous use. Free Shipping worldwide After the payment cleared. The item will be shipped right away except in Sunday and holidays of FedEx J For most of countries. The carrier will be FedEx. But for Russia. Ukraine and the other countries of“Commonwealth of Independent States” and In Asia, China will be shipped by EMS due to the difficulties going through customs. The Winning bidder needs to correct the contact numbers and shipping address before bidding. Or just email us the latest version of the information after winning the item(s) The international bidders are responsible for any Customs. Duties and All Fees to be asked by customs or brokers. Payment Payment must by received ... moreprior to shipping by PayPal Only Return Policy Due to the mature of electronic components. We are not able to offer warranty or to accept returns. Thanks for visiting. Ph- CLICK HERE! TO VISIT OUR STORE TO SEE MORE INTERESTING ITEMS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
C107516 API Motion Turbo Stepper Step Motor & Parker Compumotor OEM750 Driver
Click to Enlarge) Product ID# C107516 This API Motion model ST-0172ERA-NNLN-NNN Turbo Stepper Hybrid P.M. Step Motor includes a Parker Compumotor OEM750 Driver. As shown. These items look to be in good cosmetic condition, showing some minor signs of wear. I tested them before removing them from the machine they were a part of, and they powered up, and the motor rotated smoothly in both directions. However, this is the extent of my testing of these items, and they are being sold as-is. Approximate overall unpacked dimensions: 5"L x 4"W x 8"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a ... morefixed shipping and handling fee of 16 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 2 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all Calif
|
|
|
Phytron ZSH 87/1.200.7 Hybrid Stepper Motor 2-Phase 6 Pin Step Connector Male
Payment Policy Brand New Sony CyberShot 8 MP Di Phytron ZSH 87/1.200.7 Hybrid Stepper Motor 2-Phase 6 Pin Step Connector Male Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Phytron ZSH 87/1.200.7 Hybrid Stepper Motor 2-Phase 6 Pin Step Connector Male Used Condition Phytron ZSH 87/1 Hybrid Stepper Motor 2-Phase with 6 Pin Step Connector Male Model: 87/1.200.7 Size: 34/ 87mm NEMA Number of steps: 200 Step Angle: 1.8° Winding: 3.75 lbs/ 1.7 kg Item Condition Used Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive may ... morevary from the item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment instead of PayPal. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However larger items and quantity orders take more time to pack. 2- Shipping Method: Our standard carri
|
|
|
4 step Motor Pulley 5/8" Bore w/ keyway wood lathe 2 3/8" thick 1 3/4" to 3 1/4"
This is a Heavy Pot metal or Alloy 4 step motor pulley from the motor of a vintage wood lathe. It has a 5/8" diameter bore with a key slot. Set screw Mount. The outside diameters of the steps are@ 1 3/4"2 1/4"2 3/4" 3 1/4" Has some wear and tear dirt and dust but good working condition. Local Pick-up available. I will combine shipping on multiple purchases when practical. Please complete bidding then request a combined invoice. 362014
|
|
|
3 step Motor Pulley 5/8" Bore w/ keyway - wood lathe 1 7/8" thick 2" 3" 4" OD's
This is a Heavy Pot metal or Alloy 3 step motor pulley from the motor of a vintage wood lathe. It has a 5/8" diameter bore with a key slot. Set screw Mount. The outside diameters of the steps are@ 2" 3" 4" Has some wear and tear dirt and dust but good working condition. Local Pick-up available. I will combine shipping on multiple purchases when practical. Please complete bidding then request a combined invoice. 362014
|
|
|
PARKER COMPUMOTOR STEP STEPPER MOTOR S83-135-M0 (S1-4-58K)
This is a PARKER COMPUMOTOR STEP STEPPER MOTOR. SOLD AS PICTURED. NOTHING ELSE IS INCLUDED. PN: S83-135-M0 GUARANTEED TO BE IN WORKING ORDER UPON ARRIVAL. PLEASE DISREGARD THE NUMBERS IN PARENTHESES AT THE END OF THE DESCRIPTION IN THE TITLE. THESE ARE FOR OUR INTERNAL REFERENCE. WE OFFER A 14 DAY RIGHT OF RETURN. We accept Paypal. Payment must be made within 3 days of item ending. We take great care in packaging your products and use only the best materials. We usually ship USPS for smaller domestic shipments. For larger items. We use FedEx or UPS. We also ship freight for very large and heavy items. In order to give you the lowest possible rate, we combine shipping charges on multiple orders. WE SPECIALIZE IN INTERNATIONAL SHIPPING. International Shipping rates will be higher than the rate posted here. Please contact us for international ... morerates. All items are guaranteed to be in proper working order upon arrival. Unless specified otherwise in the description. We have been in the Industrial and manufacturing supply field for over 7 years and take pride in providing our customers with THE BEST CUSTOMER SERVICE. We do our best to describe everything. If you have questions. Please feel free to email us. We strive hard to make sure our customers are happy. We use the appropriate packaging materials that are necessary when packaging your items. We hope that you will find your purchase satisfying. If by chance there is an issue with your item, please let us know right away. We are always ready to address any concern. Powered by
|
|
|
Rockwell Delta drill press motor drive step pulley
Very good condition. I can bring charlotte. Nc and Carlisle pa points in between. in april. parting whole machine, let me know what you want.
|
|
|
Kwikee Step Motor AM Equipment 214-1003
Used step motor only for Kwikee steps on motor homes or rv's AM equipment 214-1003 Motor only
|
|
|
CROUZET 82910.0 STEPPER MOTOR 7.5 DEG PER STEP 5 WATT STEPPING
This sale is for a Crouzet 82910.0 Stepper Motor. Rated at 7.5 Degrees Per Step. 5 Watts, 66 Ohms. This unit was removed from a very lightly used piece of lab equipment- it is in excellent operational and cosmetic condition! I have 24 identical units for sale. Buyer to pay $5.35 Total shipping cost for one, or all 24 motors. Local Pick-Up here in Folsom is welcome! Feel free to call me if you have any questions. Mark 916-761-6310. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-144aa57ffcb-0x10e-
|
|
|
Sanyo Denki Step-Syn Stepping Motor type 103H7522-8200
This is used stepping motor taken from a working cannon copier It is a Sanyo Denki step-syn type 103H7522-8200 2.9A o-72 deg/step I have two available lot no. 06718 and lot no. 09705 Posted with
|
|
|
TAMAGAWA TS3653N12E, STEP MOTOR
Descriptions. Maker: JAPAN Model: TS3653N12E Resolution: 1000 P/R BROWN: 5VDC BLUE: OV SHIELD: GND Condition: Used/ As-Is Payments. Payment can be made with paypal. Our PayPal Account NO: judy@systa.kr Shipments We'll be able to shipment by worldwide. We will ship your order within 2-3 business days. It will usually take 5-7 business days after shipment If you have account of company. We can send by your account. FedEx. UPS, EMS, DHL etc. Contact Point 9 am to 5: 30 Pm UTC+9 monday to Friday( Closed on Weekends and public holidays) About Us Our company SYSTA has been established in 2002 and provides the superior engineering service and the services regarding used equipment and parts. Our network and excellent engineer are all ready to provide customers with the speedy. Reliable and qualified engineering services. CVD&Etch System Refurbish(AMAT. ... moreNovellus, WJ etc. High Performance Cleaning System(remote plasma cleaning) Parts Sourcing(Generator. Pump, Heater etc. Contact us SYSTA Co. Ltd. 569-2 Oesammi-dong. Osan-si, Gyeonggi-do, Korea( 447-230) T) 82-31-377-7520(F) 82-31-377-7521(Mail) sales@systa.kr(Web) www.systa.kr
|
|
|
American Precision P51-DO Step Motor System
UP FOR AUCTION IS THIS: American Precision P51-DO Step Motor System, DISCOUNTED FOR MULTIPLE PURCHASES- If I can fit more than 1 item into a flat rate box I will discount the 2nd item from $5- $15 depending on the size of the flat rate box. ABOUT ME: I am She Sells His Clutter. And I have his permission! For those of you who don't know my story; my husband owned a carbon fiber manufacturing company and gathered a lot of equipment from industrial auctions. As we’ve gotten older. We are now de-cluttering!
|
|
|
HP OfficeJet 7310 Printhead Operations Can Carriage Step Motor Part C9029-60027
HP OfficeJet 7310 Printhead Operations Can Carriage Step Motor Part C9029-60027. Condition: Very Good Part Number: b1403-07-16 Manufacturer: Johnson Part Number: C9029-60027 Motor Type: Printhead Step Motor, Made In China Policies: Feedback: We work hard to deliver a 5 star experience for our customers and strive to improve our fulfillment process to our fullest capability. If you feel you are not able to leave a 5 star positive feedback rating for any reason at all. Please do not leave feedback until you have allowed us an opportunity to resolve the situation to your satisfaction. Shipping Policy Details: Delivery Time: Under normal circumstances. Merchandise ships within 3 business days upon receiving payment. Please allow 1– 2 weeks for receipt of merchandise from the ship date in accordance with postal service shippment durations. We ... morecannot ship items over 70 lbs. to P.O. Box. We will only ship to addresses registered with PayPal at the time of shipping. Combined Shipping: We do offer combined shipping upon request or if the items are purchased all within the same order. Excludes discounts on items with free shipping. If you are purchasing quantities over 3 the item may take up to 3 weeks for delivery. Backordered Items: If merchandise is backordered or shipment will be delayed for any reason we will first notify you and happily offer you a full refund with a cancelation of the order. We guarantee all merchandise will ship in a maximum of 30 days from date of purchase. Postage& Fees: Shipping prices are for USA only. Free shipping does not include International. Alaska, Hawaii, Puerto Rico, the U.S. Virgin Islands, and APO/FPO. All transactions to these locations incur an additional per item handling fee for processing. Carrier Service: Seller reserves the right to change shipping method or carrier service provider at time of shipment. We cannot select which shipping company will deliver your product. This might affect you if you live in a rural community without certain types of delivery. We cannot guara
|
|
|
VERY NICE ORIGINAL SOUTH BEND 9" 10K LATHE 2 STEP MOTOR PULLEY 5/8" BORE
Very Nice Original Two Step Motor Pulley for a 9" 10K South Bend Lathe. Bore Measures 3/4" with a 1/8" keyway. Smaller pulley measures 2 1/16" diameter and larger pulley measures 3 3/8" diameter. Set screw is present. Key is included. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1/2" Bore -4 STEP 5 4 3 2 - 3/8" V Belt - POWER TOOL / MOTOR PULLEY
Nice Congress 4 step v-belt pulley. Removed from a vintage Dewalt lathe. Steps are 2.3,4, 5" 1/2" bore with set screw and keyway.
|
|
|
SHINANO KENSHI STEPPER MOTOR 1.8 DEG STEP 9 V .47 A STH-56D111
SHINANO KENSHI STEPPER MOTOR 1.8 DEG STEP 9 V.47 A CATALOG# STH-56D111 PLEASE ENLARGE PICTURES ABOVE FOR ADDITIONAL INFORMATION LOCATION: SV10-8 RH 8300.
|
|
|
Oriental Motor ASD30A-ADN-B5 Alpha Step Closed Loop Vexta Driver Used Working
This Oriental Motor ASD30A-ADN-B5 is used working surplus. The physical condition is good. But there are signs of previous use and handling. Part No: ASD30A-ADN-B5 Model No: Vexta 110/115V. 50/60Hz@ 6.0A DeviceNet Made in Japan Condition: Used Working. 90 Day Warranty Estimated Packed Shipping Dimensions: L x W x H = 12"x12"x12" 8 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number, date or country of manufacture is not necessarily the one that will be sent. 90-Day Satisfaction ... moreGuarantee(See Details Below) Lister 12 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped via the best and most economical way possible. Shipping a
|
|
|
CENTENT CN0124 Antiresonant Half Step Drive - Stepper motor controller
CENTENT CN0124 Antiresonant Half Step Drive Full description: Half-Step Drive Resonance Compensated 2 Amps. 46 Volts 20 kHz Chopper The CN0124 can be used with most size 17 and size 23 step motors. Employing mid-band anti-resonance circuitry. The CN0124 suppresses mid-band instability, permitting reliable motor operation at all speeds with full motor torque available for driving your load. A wide power supply voltage and phase current range allows the CN0124 to drive motors with current ratings from 50 mA to 2 Amps at 10-46 volts. A unique"fill" circuit smoothly transitions from half stepping at low speeds to full stepping at high speeds to extract the maximum power from your motor. The Step and Direction inputs are optically isolated for maximum noise immunity. While a high frequency"constant off time" chopper circuit ... moremaximizes efficiency. Robust circuit design and an epoxy encapsulated package contribute to a rugged and reliable step motor drive. Resolution: Half Step Power Supply Voltage: 10 VDC to 46VDC Phase Current: 1 Amp to 2 Amps Switching Frequency: 20 kHz Step Pulse Rate: 0 to 50 kHz Power Dissipation: 30 Watts(max) Operating Temperature: 20 to 70 Deg C(4 to 158 Deg F) Weight: 6 Oz(170.1 g) Size: 2" X 3" X.85" 50.8mm X 76.2mm X 21.6mm) Contact us about pricing. Tested and working. For more than 1 unit. Please contact for shipping cost. Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
|
|
|
Minebea Astrosyn Miniangle Stepper Motor Type 42PM-C024 Stepping 1.8 deg / Step
Click to Enlarge Click to Enlarge Click to Enlarge Condition Used. Pulled from working environment. I have 2 motors available. You may not get the one in the picture. They are exact except for serial numbers. Description and Features 2.3V/ phase 6.2A/ phase 1.8 degrees per step We strive to be the best but we are only human. So if you have ANY issues please contact us first. We want your eBay experience to be great! inkfrog terapeak. InkFrog Analytics. On Jan-14-14 at 07:44:03 PST. Seller added the following information: supreme. Supremewidgets. Supremeauctiononlinesoftware.widgets.EbayGalleryZ.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.EbayGalleryZ.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.GalleryCat.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.GalleryCat.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.FeedbackWidgetBasic.swf. ... moreSupremewidgets. Supremeauctiononlinesoftware.widgets.FeedbackWidgetBasic.swf.
|
|
|
JAPAN SERVO STEPPING MOTOR, KP56LM2-504, 1.8 DEG/STEP
Very good condition JAPAN SERVO STEPPING MOTOR. KP56LM2-504, 1.8 DEG/STEP What you see in the pictures is what you will receive. Feel free to contact us if you need further help. Thank you. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-144b9b334f6-0x10b-
|
|
|
1907 Automobiling Sheet Music W.C. Parker Early Motor Car Cover Two Step + Words
VINTAGE 1907 AUTOMOBILING SHEET MUSIC by W.C. Parker A Two-Step with words Great early motor car cover 10.5" by 14" This Vintage sheet music piece is a great collectible. The item is in used overall condition with wear and edge tears. It is being sold as is. I have taken a picture of the item so you can make your own judgment of its condition and bid accordingly. The item will be protectively shipped. Please feel free to ask me any questions you desire. Winning bidder will be contacted promptly after end of auction and payment is expected within 4 days. I accept Paypal as well as whatever other payment methods are still allowed by eBay policies at the time of purchase. Shipping and handling is $3.95 within the United States. This includes delivery confirmation tracking for US shipments. This item will not be shipped outside the ... moreUS.
|
|
|
1900 The Automobile Two Step Sheet Music G.N. Benson Early Motor Car Cover Rare
VINTAGE 1900 THE AUTOMOBILE TWO STEP SHEET MUSIC by G.N. Benson Great early motor car cover 11" by 14" This Vintage sheet music piece is a great collectible. The item is in used overall condition with rips and tears. It is missing some internal pages and is being sold as is. I have taken a picture of the item so you can make your own judgment of its condition and bid accordingly. The item will be protectively shipped. Please feel free to ask me any questions you desire. Winning bidder will be contacted promptly after end of auction and payment is expected within 4 days. I accept Paypal as well as whatever other payment methods are still allowed by eBay policies at the time of purchase. Shipping and handling is $3.95 within the United States. This includes delivery confirmation tracking for US shipments. This item will not be shipped ... moreoutside the US.
|
|
|
COMPUMOTOR STEP MOTOR INDEXER CONTROLLER MODEL# 2100-2
This Stepper motor controller was pulled from a custom CMM and has very low usage. Guaranteed not DOA
|
|
|
Oriental Motor Vexta PK596-A 5-phase Stepping Motor 0.72/step DC 1.4A
Condition Used. Great working condition Description and Features Manf: Oriental Motor Model/Type: Vexta PK596-A Stepping Motor HZ: DC Voltage: 115 Amps: 1.4 Ohms: 1.5 5 Phase 0.72 Degrees per Step inkfrog terapeak. InkFrog Analytics. On Jan-14-14 at 07:44:12 PST. Seller added the following information: supreme. Supremewidgets. Supremeauctiononlinesoftware.widgets.EbayGalleryZ.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.EbayGalleryZ.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.GalleryCat.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.GalleryCat.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.FeedbackWidgetBasic.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.FeedbackWidgetBasic.swf.
|
|
|
Superior Electric M092-FD08 Slo-Syn Syncronous DC Stepping/Step Motor 3V/4A
Questions? Call us: 1-877-328-9236. Superior Electric M092-FD08 Slo-Syn Syncronous DC Stepping/Step Motor 3V/4A. Manufacturer: Superior Electric Model: M092-FD08 Condition: Used Price: Manufacturer: Superior Electric Condition: Used. Comes in non-original packaging. This motor is in good condition with a few scuffs and scratches from normal use. But nothing major or anything that would affect function. Notes: This motor was pulled from a working setup that was being decommissioned. But was not tested separately after removal. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Superior Electric M092-FD08 Slo-Syn Syncronous DC Stepping/Step Motor, Specifications: Manufacturer: Superior Electric, Series: Slo-Syn, Model: M092-FD08, Description: Synchronous/Stepping DC Motor, Total Weight: 5.30 lbs. ... moreCondition: NEW, Quantity: 1, SKU: O09P018 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to
|
|
|
Oriental Motor/Vexta A4886-9215KM 5-Phase 0.72�/Step Stepping Motor 3.8A Brake
Questions? Call us: 1-877-328-9236. Oriental Motor/Vexta A4886-9215KM 5-Phase 0.72�/Step Stepping Motor 3.8A Brake. Manufacturer: Oriental Motor Model: A4886-9215KM Condition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Oriental Motor Condition: Used. This stepping motor is in excellent condition with a few very minor little scratches from light use. But nothing major or anything that would affect function. Notes: This motor was pulled from a working machine that was being decommissioned. But was not tested separately after removal. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Oriental Motor/Vexta A4886-9215KM Stepping Motor, Specifications: Manufacturer: Oriental Motor(Vexta) Model: A4886-9215KM, Description: Stepping/ Step Motor, ... moreStepping: 0.72º/Step, Phases: 5-Phase, Voltage: 24VDC, Amperage: 3.8 Amps, Weight: 2.45 lbs. Condition: Used, Quantity: 1, SKU: M51P021 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before
|
|
|
Applied Motion 5034-413D Stepper Motor 2.2A/1.4V/.64ohm Step 5034413D pr4le
Applied Motion 5034-413D Stepper Motor 2.2A/1.4V/64ohm Step 5034413D Inventory Location: pr4le Like new Please leave positive feedback we will do the same for you Thank you for contacting Quality Manufacturing Services Inc. If you have any questions? Please do not hesitate to call us in San Diego. Best regards, Terms and Conditions You are purchasing a USED ITEM. The item appears to be in good physical condition and it came from a working environment however we do not have the facilities or in some instances the knowledge to thoroughly test the item. All items are sold AS IS and listed measurements(Length. Width, Height, Weight) are approximations. Our RETURN POLICY is to fully refund your purchase price if you meet the following: 1. You advise us within seven days of receipt of the item that you intend to return it AND 2. You effectuate ... morethe return within 14 days from receipt of the item AND 3. You pay for the return shipment. We are firm on this policy. We ship economy/ground USPS. FedEx or UPS unless otherwise requested and paid for by purchaser. We also will ship via YOUR FedEx or UPS account if so requested. If freighting is required we will arrange for the freight company or will work with the freight company you designate. All freighted items are F.O.B. meaning our liability for the freighting ends and yours begins as soon as the item is properly loaded onto the freighting company’s truck or other transportation entity. Shipping/freighting insurance. If desired, is your(Purchaser’s) responsibility both to arrange and pay for. In the event a package is received damaged, you(the Purchaser) are responsible for initiating the claim and for keeping all original boxing and packaging so the carrier can inspect and properly initiate the claim. We accept payment in the following forms: Pay Pal. Credit Card, E-check, Wire Transfer. We do not ship C.O.D. SHIPPING OPTIONS: We offer several options for delivery. Pick up at our location in San Diego is free. We will deliver to the surrounding area for a reasonable
|
|
|
SANYO DENKI 103Z708-4 STEP-SYN STEPPING MOTOR 103Z7084 12V
ARPI MACHINE SALES. OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 OFFICE: 818 890-7625 VERY IMPORTANT! PLEASE READ. AFTER PURCHASING THIS OR ANY OTHER ITEM FROM US. PLEASE LEAVE POSITIVE FEEDBACK AND GIVE US A 5 STAR RATING IN ALL 4 CATEGORIES. IF YOU HAVE ANY PROBLEMS WITH YOUR ORDER, PLEASE CALL US AT THE OFFICE IMMEDIATELY(BEFORE LEAVING FEEDBACK) AND WE WILL TRY TO RESOLVE ANY ISSUES YOU HAVE. FURTHERMORE, WE MARK ALL OF OUR ITEMS TO PREVENT ANY DISHONEST EBAYER FROM TRYING TO EXCHANGE OUR ITEM WITH THEIR OLD/NON WORKING ONE AND THEN ATTEMPT TO SEND BACK TO US BY CLAIMING IT AS NON WORKING IN ORDER TO RECEIVE A REFUND. THIS HAS HAPPENED SOMETIMES AND WE HAVE TAKEN SERIOUS ACTION AGAINST THESE FRAUDULENT PRACTICES IN THE PAST. THIS TYPE OF BEHAVIOR IS UNACCEPTABLE AND ACTION WILL BE TAKEN AGAINST THESE BUYERS ... moreTHRU EBAY POLICIES BY REPORTING THEM TO EBAY IMMEDIATELY. HERE AT ARPI MACHINE SALES, WE REALIZE MOST PEOPLE ARE HONEST AND DO NOT PRACTICE TECHNIQUES MENTIONED ABOVE. BY THE SAME TOKEN WE ARE COMMITTED 100% TO PROVIDE SUPERIOR CUSTOMER SERVICE TO ALL WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION WE WILL SEPARATE IF YOU SEE SOMETHING YOU WOULD LIKE TO BUY TO SEE ALL PARTS FROM THIS MACHINE PLEASE PLEASE CALL IF YOU NEED OTHER PARTS FOR IT. MONARCH SIDNEY PALLET 1(2) FS CALIFORNIA BUYERS TO PAY 9% SALES TAX SHIPPING& HANDLING: INTERNATIONAL AND EXPEDITED SHIPPING AVAILABLE PAYMENT INSTRUCTION: Payment can be made with paypal. Business or personal check or wire transfer. All payments must be received by Arpi Machine Sales within 7 days. Payments must be sent to ARPI MACHINE SALES at 12165 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 298-9685 or by e-mail. TERMS AND CONDITIONS: If payment is not received within 7 days. ARPI MACHINE SALES has the right to re-list the
|
|
|
Oriental Motor Vexta PH299-02B PH29923 2 PH 1.8 6v 2A Step Stepping Motor S14320
Oriental Motor Vexta PH299-02B PH29923 2 PH 1.8 DEg 6v 2A Step Stepping Motor S14312
|
|
|
Model PH268-21 Vexta Stepping Motor 2 Phase 1.8 Deg/ Step 5.4V 1.5A PT7 57205
You are bidding on a 1(one) Model PH268-21 Vexta Stepping Motor 2 Phase 1.8 Deg/ Step 5.4V 1.5A PT7 57205. Comes as you see in pictures. Minor marks and scratches. Not tested. Sold As Is Shipping Item will be insured for it's final sale amount and tracking number provided either to eBay messages or your PayPal account. Our carrier of choice is FedEx. Other carriers may be used dependent upon circumstances. But we highly prefer using FedEx. We set a flat shipping rate of $10.00 for US and this includes packing. We believe an item will arrive in the best possible condition and exactly as I described. Unit may be pickup in person and no shipping charges will apply. Purchase a quantity of items or buy from another one of our auctions and shipping will be combined at a discounted rate. If you buy multiple items and want to pay immediately, ... morewe will adjust the cost and refund the difference. Overnight a shipping can be done at customers request, but may not always be possible. Please inquire. International bids accepted, but please inquire first. Shipping for international will usually be cost of actual shipping plus $10 for packing. For any Freight item, please ask for a quote. Questions? Just ask and I will help as best as I can. Thanks for looking! Posted with
|
|
|
Model PH265-05 Vexta Stepping Motor 2Phase 1.8 DEG/ Step 1.4V 3.8A Used
You are bidding on a 1(one) Model PH265-05 Vexta Stepping Motor 2Phase 1.8 DEG/ Step 1.4V 3.8A Used. Comes as you see in pictures with some marks and scratches. Not test and Sold as is. Shipping Item will be insured for it's final sale amount and tracking number provided either to eBay messages or your PayPal account. Our carrier of choice is FedEx. Other carriers may be used dependent upon circumstances. But we highly prefer using FedEx. We set a flat shipping rate of $9.00 for US and this includes packing. We believe an item will arrive in the best possible condition and exactly as I described. Unit may be pickup in person and no shipping charges will apply. Purchase a quantity of items or buy from another one of our auctions and shipping will be combined at a discounted rate. If you buy multiple items and want to pay immediately, we ... morewill adjust the cost and refund the difference. Overnight a shipping can be done at customers request, but may not always be possible. Please inquire. International bids accepted, but please inquire first. Shipping for international will usually be cost of actual shipping plus $10 for packing. For any Freight item, please ask for a quote. Questions? Just ask and I will help as best as I can. Thanks for looking! Posted with
|
|
|
PACIFIC SCIENTIFIC T22NRHJ-LDN-N8-00 STEP STEPPER MOTOR DOUBLE SHAFT 1/4"
YOU ARE BUYING ONE PACIFIC SCIENTIFIC T22NRHJ-LDN-N8-00 STEP STEPPER MOTOR DOUBLE SHAFT 1/4" THIS IS USED SHELF SURPLUS FROM A SHUT DOWN EVERGREEN SOLAR FACILITY AND IS GUARANTEED NOT D.O.A. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION. G2BD) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144c2c283bb-0x104-
|
|
|
VEXTA D6CL-6.3F CLEAN DAMPER FOR STEP STEPPER MOTOR
YOU ARE BUYING ONE VEXTA D6CL-6.3F CLEAN DAMPER FOR STEP STEPPER MOTOR. WHAT IS PICTURED IS WHAT YOU WILL RECEIVE. THIS IS USED SHELF SURPLUS FROM A SHUT DOWN EVERGREEN SOLAR FACILITY AND IS GUARANTEED NOT D.O.A. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION. G2BD) Estimated Retail Price: $47.30 International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your!
|
|
|
LIN 5718M-05DE-18RO STEP STEPPER MOTOR 1/4" SHAFT VEXTA D6CL-6.3F CLEAN DAMPER
YOU ARE BUYING ONE LIN 5718M-05DE-18RO STEP STEPPER MOTOR 1/4" SHAFT VEXTA D6CL-6.3F CLEAN DAMPER. WHAT IS PICTURED IS WHAT YOU WILL RECEIVE. THIS IS USED SHELF SURPLUS FROM A SHUT DOWN EVERGREEN SOLAR FACILITY AND IS GUARANTEED NOT D.O.A. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION. G2BD) Estimated Retail Price: $233.64 International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me ... moreto your!
|
|
|
LIN 5718M-05PD-20RO STEP STEPPER MOTOR BIPOLAR DOUBLE SHAFT, 1/4" NON-KEYED
YOU ARE BUYING ONE LIN 5718M-05PD-20RO STEP STEPPER MOTOR BIPOLAR. DOUBLE SHAFT. 1/4" NON-KEYED. WITH COUPLING AS PICTURED. WHAT IS PICTURED IS WHAT YOU WILL RECEIVE. THIS IS USED SHELF SURPLUS FROM A SHUT DOWN EVERGREEN SOLAR FACILITY AND IS GUARANTEED NOT D.O.A. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156, OR HIT ASK THE SELLER A QUESTION. G2BD) Estimated Retail Price: $186.34 International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check ... moreout my! Be sure to add me to your!
|
|
|
PACIFIC SCIENTIFIC VDE0530-S1 P21NRLA-LDN-NS-00 POWERMAX II 1.8° STEP MOTOR
YOU ARE BUYING ONE PACIFIC SCIENTIFIC VDE0530-S1 P21NRLA-LDN-NS-00 POWERMAX II 1.8° STEP MOTOR. DOUBLE SHAFT. 1/4" NON-KEYED. 174.99174.THIS IS USED SHELF SURPLUS FROM A SHUT DOWN EVERGREEN SOLAR FACILITY AND IS GUARANTEED NOT D.O.A. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156, OR HIT ASK THE SELLER A QUESTION. G2BD) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your!
|
|
|
PARKER TELCO 4H2818L0674RSM STEP MOTOR
YOU ARE BIDDING ON ONE PARKER TELCO 4H2818L0674RSM STEP MOTOR. THIS IS USED SHELF SURPLUS REMOVED FROM A SHUTDOWN EVERGREEN SOLAR FACILITY AND IS GUARANTEED WORKING. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. MWGCAB X2) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-144cb77032c-0x10d-
|
|
|
Parker AAD Actuator ETS50 with Nema 34 Step Motor 300 mm Electric Cylinder
Part# ETS50-B02PA33-JMA300-A. This is a Parker Automation Actuator Division electric cylinder model ET50. It has a 0.5 inch lead ballscrew and 300 mm(11.8 inches) of travel. It has a Nema 34 step motor(triple stack) connected with a parallel 1:1 pulley housing. The motor is equivalent to a Compumotor S83-135 or Zeta83-135. The rod end is a metric male(M16 x 1.5) The motor has a brad harrison quick disconnect connector with a 10 ft. cable. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-144cd15d1a8-0x112-
|
|
|
Linear Stage Lead screws & Step Motor for Automation
Linear Stage Lead screws& Step Motor for Automation Item size 7 cm x 6 cm x 20.5 cm Max. travel 3 cm Ship from Thailand to Worldwide 24.99 $ by register small packet-air 14-21 working days Payment by PayPal Thank you.
|
|
|
Motore passo-passo piatto sottile (slim step motor) OKI + Neocene (lotto 3 pz)
Motore passo-passo piatto sottile(slim stepping motor) OKI + Neocene(lotto di 3 pezzi) OKI EM-553(2 pezzi) corpo in metallo con bronzine. prodotto dalla Oki Micro Engineering Co.Ltd. per conto della Epson. diametro 35mm. Spessore 7,5mm(circa, esclusa flangia di fissaggio) Ingranaggio in plastica. collegamento con connettore(4 fili) con piccolo toroide antidisturbo. fissaggio a mezzo flangia integrata nel corpo(viene fornito montato su robusta flangia a mezzo due viti. Con ingranaggi in plastica, vedi foto) alcune caratteristiche a questo link: Neocene 2T3542187. 9.6 Ohm. step 3.75°. corpo in metallo con singola bronzina(sistema brevettato. Vedi link: diametro 35mm. Spessore 8,3mm(inclusa flangia di fissaggio) Ingranaggio in plastica. collegamento con connettore(4 fili) fissaggio a mezzo flangia integrata nel corpo. alcune caratteristiche ... morea questo link: More similar items are available in my auctions. Altri oggetti simili sono disponibili nelle mie aste. ★ ★ ★ Posso inviare via e-mail foto nitide ad alta risoluzione. Anche di dettagli della componentistica e informazioni. ★ ★ ★ Éntreme en contacto con por favor para más fotos in hi-resolución e información. ★ ★ ★ Please contact me for more hi-resolution photos and informations. ★ ★ ★ Treten Sie mit mir bitte zu mehr Halloauflösung Fotos und Information in Verbindung. ★ ★ ★ Veuillez me contacter pour plus de photos in hi-résolution et d'information. ★ ★ ★ Contate-me por favor para mais fotos e informações da olá!definição. A T T E N Z I O N E* VENDITA DA PARTE DI UN SOGGETTO PRIVATO. FORMULA DI ESCLUSIONE DELLA GARANZIA. La legislazione vigente nell'Unione Europea prevede che anche i privati siano tenuti a dare garanzia sugli oggetti venduti a meno che tale garanzia non sia esplicitamente esclusa al momento della vendita. In conseguenza di ciò. Anche se l'oggetto proposto potrebbe essere perfettamente funzionante, esso è venduto"così com'è" con esclusione espli
|
|
|
CROUZET 82924014 GEAR MOTOR PAS STEP 7.5 DEG GEARED STEPPER STEPPING
This sale is for a Crouzet model 82924014 PAS STEP 7.5 DEGREES 7.5 WATTS 10.7 OHMS RAP 25/4 geared stepper motor. This item was removed from a fully functioning lightly used piece of laboratory equipment and is guaranteed to work. Shipping will be $8.95. Thanks. Mark ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-144cff259d7-0x10d-
|
|
|
CROUZET 82929001 GEAR MOTOR PAS STEP 7.5 DEG GEARED STEPPER STEPPING
This sale is for a Crouzet model 82929001 geared stepper motor pas step 7.5 DEG 7.5 WATTS 10.7 OHMS RAP= 150. This item was removed from a fully functioning piece of laboratory equipment and is guaranteed to work. shipping will be $8.95. Thanks. Mark.
|
|
|
Trennjaeger VC320 Metal Cutoff Miter Cold Saw GA48 2-speed motor 3 step blade
please scroll down and view all the photos. The title is not a complete description so please read the ad description. You Are Bidding On A Pre-Owned S/N: GA48. 2-speed motor 1500- 3000 rpms. 3 step blade pulley, 6 blade speeds, 4 stage helical gear train, spring head control. AEG 440v 3P 1.5-2.0 KW included 2 spare blades. Pipe vise, stock stand. Description S/N: GA48. 850# shipped mfg info TRENNJAEGER VC-320 Circular Cold Saw, capacity: sections 8” x 4” at 90 degrees. Rounds 4-3/4” at 90 degrees, 4 stage helical gear train, head travels on machined vertical column, adjustable square guide housing, recirculating coolant system; slide out chip drawer, 3 step blade pulley; 2 speed motor, 6 blade periphery blade speeds, ratchet type adj. spring head control; spring loaded chip remover holder, emergency off button(manual reset) wired: 3/480 ... moreThere is no charge to skid or load. Local pickups save all shipping and we can load with forklift into your truck or trailer. Questions email or call BOB 773-392-5055 Terms of Sale Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping· Flat rate shipping is to lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. Most items have a warranty check ad for policy in none is listed then the following applies. All items are sold"AS- IS. Where- IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We at Best Bay Machinery Sales and/or the Seller make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warrant
|
|
|
Parker CompuMotor Gemini GT-L5-NK Stepper Step Motor Driver - CNC Router DIY Kit
Parker Compumotor Gemini GT-L5-NK Stepper Motor Driver. Retail Price = $1.673.00 ea*Auction Price is for 1 driver. I have many available* This auction is for a lightly used Parker Gemini GT-L5 stepper motor driver that is in excellent condition. These are very high-performance stepper drivers with a 170vdc bus voltage and a user selectable step resolution of 200 to 128.000 steps per rotation. From the manufacturer: The Gemini GT Digital Stepper Drive The Gemini GT is the digital stepper drive member of the Gemini Family. The Gemini GT is easily configurable and programmable via RS232/485 using Compumotor’s Motion Planner TM on a PC or Pocket Motion Planner TM on a Window’s CE-based palm PC. The Gemini GT is an alternative to a digital servo drive. With breakthrough techniques such as Encoderless Stall Detect TM and ABS damping TM(patents ... morepending) The Gemini GT provides servo like performance with the lower motor price of a stepper system. With the same connectivity, configurations, and family feature set as the Gemini GV, the Gemini GT allows for an easy upgrade path to the Gemini GV digital servo drive. Active Damping TM. Electronic Viscosity TM and ABS Damping TM The Gemini GT follows in the footsteps of Compumotor’s ZETA drive family and offers Active Damping TM(patented) and Electronic Viscosity TM(patent pending) The Gemini GT goes one step further with ABS Damping TM(patent pending) This damping feature is for speed ranges from 0 to 0.1 revs/sec. This"no-fuss" feature requires no user set up and dramatically reduces settling time. Encoderless Stall Detect TM Encoderless Stall Detect TM allows detection of a motor stall without adding an encoder to an application. Stall conditions result from inequality of commanded velocity to actual velocity at the motor shaft. Regardless of physical reason. The user will be alerted to a stall condition via LED, digital output, or via query over the communication port. Stall sensitivity can be adjusted with a single parameter. Features Gemini GT Performance Prov
|
|
|
VEXTA MODEL PK-245-01A 2-PHASE 1.8 DEG PER STEP STEPPER MOTOR STEPPING
THIS SALE IS FOR A VEXTA STEPPING MOTOR MODEL PK-245-01A 2-PHASE 1.8 DEG PER STEP 1.2 AMP 3.3 OHMS STEPPING MOTOR. THIS ITEM WAS REMOVED FROM A FULLY FUNCTIONING PIECE OF LABORATORY EQUIPMENT THAT WAS LIGHTLY USED AND IS GUARANTEED TO WORK. SHIPPING WILL BE $6.95. THANKS. MARK
|
|
|
IMS MDRIVE STEP MOTOR & MOTION CONTROLLER # MDM1CSZ23B7-EJ
LOCATION: E-13 PLEASE CONTACT US FOR INTERNATIONAL SHIPPING PRICES. THE SHIPPING PRICE YOU SEE IS FOR CONTENENTAL US SHIPPING ONLY. WHEN YOU CONTACT ME FOR SHIPPING PRICES PLEASE INCLUDE YOUR COMPLETE SHIPPING ADDRESS. PLEASE SEE OUR OTHER SALES OF AUTOMATION PRODUCTS IN MY EBAY STORE! BID WITH CONFIDENCE On Aug-22-08 at 08:55:30 PDT. Seller added the following information: On Mar-24-10 at 07:52:09 PDT. Seller added the following information: POLICIES: Payment Methods: PayPal Other: Payment required within two(2) days of completion of sale. EBay non-paying bidder alerts will also be filed against non-paying bidders. Shipping Available: SAME DAY SHIPPING TO USA and Worldwide. If payment is received by 3:00 PM EST. We Ship: Monday through Friday, every business day. No weekends or holidays. Orders placed and paid for over the weekend will ship ... moreMonday morning. Shipping for USA: UPS Ground. UPS RED…Next day air can be arranged. In special cases other methods can be used. Shipping for International: The following service is available: USPS Priority Mail using flat rate boxes. The International buyer is responsible for any import duties and taxes charged by their country. Fixed Shipping and Handling Costs…Are stated for each item for sale. 80servo sells high quality surplus electronic equipment and components. This type of material requires special care and packing material when preparing your order for shipment insuring your items are protected and arrive safely ready to use. You will always know the shipping charge prior to your purchase. Canadian Customers are encouraged to request a shipping quote prior to placing an order. USPS Flat rate Canadian shipments are less expensive than International. Are Returns Allowed: YES, Must be notified within 3 days after receipt of shipment and approved for return by 80servo. A full refund via PayPal will be issued after receipt and inspection of returned goods. A refund for outgoing and return freight WILL NOT be issued. On Oct-20-10 at 09:36:58 PDT. Seller added the followi
|
|
|
3 STEP V BELT PULLEY FROM AND METAL LATHE MOTOR 1/2 HOLE ATLAS CRAFTSMAN PART
3 STEP"V" BELT PULLEY FROM AND METAL LATHE MOTOR 1/2" HOLE WITH SET SCREW PULLEY SIZES LARGEST OUTSIDE DIAMETER 3 1/2" INSIDE DIAMETER 2.5" MIDDLE PULLEY OUTSIDE DIAMETER 2.5" INSIDE DIAMETER 1.63" SMALLEST PULLEY OUTSIDE DIAMETER 2.0" INSIDE DIAMETER 1.1" IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, ... moreand before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
Vintage Craftsman 103.0404 Jig Scroll Saw 4 step pulley 5/8 shaft motor v belt
This is pretty dirty but in good shape. The steps are 3 1/8, 3 5/8, 4 1/8, and 4 5/8, and it has a 5/8 hole.
|
|
|
STEP MOTOR - AMERICAN PRECISION 23T-206A-MO
STEP MOTOR- AMERICAN PRECISION CONTROLS DIVISION*MODEL# 23T-206A-MO*HAVE 38 MORE IN-STOCK*USED IN GOOD CONDITION*USED FOR PRECISION DEMO MILL*FREE SHIPPING*$95.00 EACH
|
|
|
14" Bandsaw 4 Step Motor Pulley Jet Delta Powermatic Grizzly Central Machinery
Here we have the 4-step motor pulley off of a Central Machinery 14" Bandsaw. 5/8" bore. Steps are 1 3/4" 2 1/2" 3 3/8" 4 1/8" She's in like new condition, as the bandsaw was only used for a few test cuts. Max domestic USPS shipping for this item is $12.80. If your quote is for more. It will be adjusted upon invoice. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-144e3823e92-0x10b-
|
|
|
BRIDGEPORT Original Low Profile 1 Phase 115/230 Motor Step Pulley complete USA
Used( Excellent Condition- very smooth& quiet) BRIDGEPPORT brand Model J Head Step Pulley MOTOR Original 3/4 HP with- step pulley and forward reverse switch- LOW PROFILE 6" from mounting base( Pancake Type Motor) net shipping weight is 65 lbs- recommend UPS* this auction/ sale is for( 1) used BRIDGEPORT Step Pulley Motor 1 Phase Thanks- I have others milling accessories. Collets- tooling- and yes machines in stock for sale as well We appreciate this opportunity and look forward to receiving your order and to servicing your needs. Now and in the Future. Thank you. Best regards, Paul Terry. Sales Ph(978) 532-1112 Fx(978) 532-2581 BOSTON MACHINERY. INC. BOSTON MACHINERY. INC. 119 Foster Street P. O. Box 271 Peabody. MA. 01960 NOTE: All delivery dates are based on our best estimates at the time of quotation and can varydepending on manufacturing. ... moreShipping, trucking and supplier delays which we cannot be held responsible for. All Machines& accessories are subject to prior sale/ or removal from sale. All specifications are subjection to change or typographical error. Please verify at the time of your purchase. Thank You. NOTE: Boston Machinery has factory trained service personnel for all the New and Used Equipmentthat we Sell& Service throughout New England. We also have a very experienced Parts Department to help you out with all your machinery parts needs– CNC or Manual. Any Type! Just call us– we take care of the rest. On Time
|
|
|
Vexta PK544-NA 0.72/Step 5-Phase Stepping Motor
ORIENTAL MOTOR CSD5807N-P 5ph STEPPER MOTOR DRIVER CONTROL BOARD VEXTA pulled working. Used in working condition. as seen in the picture. No other accessories included. shipping is Fedex or Singpost WWSpeed air parcel and INSURANCE IS INCLUDED in the shipping fee. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-144ee942207-0x117-
|
|
|
24 volt DC variable reduction step down motor 1/2" shaft rotisserie
This is a great motor with high output torque. The voltage can be varied with a potentiometer from approx 5 volts to 24 volts DC. The RPM's at 5 volts is approx 12 RPM's and approx 60 RPM's at 24 volts. The shaft is slightly less than a half inch. Great motor for a rotisserie.
|
|
|
Anaheim Automation DPS30001 Step Motor Driver T39476
Call: 915-219-7095- 8am- 5pm Mountain Time Anaheim Automation DPS30001 Step Motor Driver T39476 Warranty Information: USED PULLED FROM WORKING EQUIPMENT Product Description: Reference Number: T39476 Estimated Shipping Weight: 5.0000 Estimated Shipping Dimensions: 6.0000 x 6.0000 x 6.0000 Greetings from the Southwest. We are TEAM International Inc, 2nd Hand Store to the Trade. TEAM is a trading company. We buy and sell just about anything. We are always up to making a deal so please feel free to inquire. Check Out Now Payment Shipping Customer Service Check-Out Now: Click the Pay Now button at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later: If you desire a freight quote. ... moreCustom shipping, or any extra service we can invoice you after the purchase with your request. Please give us a call or eBay message with your request. We are open to any and all payment methods. We also take credit card payments over the phone. 915) 219-7095• Payments can also be sent to: TEAM International Inc Accounts Payable 2901 Durazno Ave El Paso TX 79905 For shipments to Texas addresses. We are required by State law to collect 8.25% Sales Tax. ATTENTION TEXAS RE-SELLERS: If you have a Texas Resale Tax Certificate we can remove the Texas Sales Tax. We ship all around the world. If you need something out SAME DAY/OVERNIGHT please give us a call to confirm- 915) 219-7095• Shipments Under 60 lbs. UPS: Our primary carrier is UPS for domestic shipments. USPS: For International shipments we use USPS DHL International: We can ship on your DHL account. Please send account number with order. Ship on your account: Have a Fed-Ex or UPS account? Send us the account number and we w ill remove the shipping charge from your order and ship: Overnight. 2 day, or 3 day. Ground shipping not available on Fed-Ex accounts) Freight Shipments Freight Quotes: For freight quotes p
|
|
|
Sanyo Denki CNC XYZ 3 Step motor 1.8 deg stepper reprap 3d printer motor
Please read carefully before bidding You are bidding on 3- DC Step Motors Made by SANYO DENKI Type: 103H548-0498 Step: 1.8/step Dimensions: 1.65" x 1.65" x 1.61" Rod length: 0.42" Rod diameter: 0.195" For more information- click on the link below: Excellent working condition! See pictures Subscribe to our mailing list My Policies: If for any reason. You are not satisfied with your purchase please contact us immediately by Email or Phone, before contacting eBay Resolution center or Leaving Feedback! If the item describe"as is" There will be no returns unless it is"not as describe" issue. The main title dose not necessarily describe the item. If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All ... moree-mails will be answered as soon as possible! Please noted we are working 6 days a weak between: 5:00AM(GMT) 14:30(GMT) Sunday throw Friday. PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. NOTE for Israeli buyers: The price dose not includes V.A.T. Please contact us for shipping and v.a.t. SHIPPING Shipping options: Registered. EMS, UPS, FedEx Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. I cannot be responsible for uninsured packages that got lost or damaged during shipping. There is NO extra charge for packing materials or"handling" unless specified in the item description above. For the safety of the enviorment- We are using recycled materials for packing. Please let us know if you prefers new packing materials and we will charge you respectively. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depend
|
|
|
Stepper Motor model STP-58D201-02 1.8 DEG/STEP 3.0 V 2.0A
You are bidding on a Stepper Motor model number STP-58D201-02 1.8 DEG/STEP 3.0 V 2.0 A that was removed from working equipment and is in good working condition. Thank you for choosing us! We pride ourselves in total customer satisfaction. If you are not happy with your transaction with us please contact us before leaving negative feedback or bad rating. We want to keep your business and we are committed to your satisfaction. Payment: Unless otherwise stated in the listing. Payment is due within 48 hours after the close of auction. Shipping: We only ship to 48 connected states Some items can be picked up from our site. Such items would have this stated in the description and the cost for pickup would also be in the description. If this is not in the description then pickup is not available for such items. Items that are picked up are subject ... moreto 6% Michigan State Tax. Returns: If item bought has a warranty. Warranty is limited to an exchange with same item or item of comparable value. Buyer is responsible for shipping cost to return item and shipping is non refundable. If we do not have such an item then warranty is limited to a refund of the amount paid minus shipping. However most of our items come with free shipping and therefore such items get full refund. Restrictions: If your feedback is zero. Please call us or send us an email before you bid. Otherwise your bid is subject to cancellation. If you are bidding from outside of the 48 connected states, PLEASE contact us before you bid so we can discuss shipping methods and cost. If you are bidding from Canada, PLEASE contact us before you bid so we can discuss shipping methods and custom taxes. Thank you for your interest in our auctions and please do not forget to leave us feedback and rate us excellent in all measures. Visit our for great deals and offers. If we do not have it in the store we might be able to get it for you. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Sanyo Denki Step-Syn 1.8° 2.8A 1.9V Stepper Stepping Motor Type 103G770-1240
Excellent Electronics! Don't be shy- Make an offer! Have a question? Need a similar item that we don't have listed yet? Ask us! Questions are always welcome. Up for Auction: ONE Sanyo Denki Step-Syn 1.8° 2.8A 1.9V Stepper Motor Type 103G770-1240. Shaft length is approx 3/4" hub can easily be removed) Shipping: +Shipping WORLDWIDE within 48 hours of received payment. +Combined shipping for any auctions purchased within a week. +Shipping via USPS for most items; Fedex for items over 50 pounds. International Shipping: +Insurance for international shipments is only available for Priority Mail. +Buyer is responsible for paying any applicable customs/brokerage fees. Duties, use/sales and import taxes, etc. Please do not ask us to declare a lesser value on any of our items. +Shipping to international locations(such as Italy. France, ... moreVietnam. may take longer than advertised; this is a problem with the system in your country, all of my shipments go out as stated above. Payment: +Payment due 3 days after auction ends. +Use Ebay's checkout feature& pay via Paypal. +If you want to purchase other items we have for sale. Message us and we will combine shipping on all auctions purchased within one week. We will bill you when the final auction ends. Returns: +Items are guaranteed to be as stated in the auction. In the rare case we make a mistake and something is not as stated. We honor our 14 day return policy, including a full refund! +Otherwise. Due to age and us not knowing how the item will be used, they are sold as-is, no returns. Feedback: +Rate our shipping based upon when it was mailed. Not when it was received. +If you have any reason to give us less than 5 stars on our DSR. Please contact us so we can correct the mistake! We encourage all customers to contact us regarding any problems with the transaction before leaving negative feedback/low DSR ratings. We are honest people selling the things we're interested in. So we are invested in having everything to go smoothly for us both. If there
|
|
|
USED VEXTA PH266M-E1.2 STEPPING 6V-DC 2PH ELECTRIC MOTOR 0.9"/STEP
FOR SALE USED VEXTA PH266M-E1.2 STEPPING MOTOR 6V-DC 2PH ELECTRIC MOTOR 0.9"STEP I HAVE TWO UNITS AVAILABLE BITH IN REALLY GOOD WORKING CONDITION. I ACCEPT PAYPAL ONLY. Posted with
|
|
|
PACIFIC SCIENTIFIC P21NRXA-LNN-NS-00 STEPPER MOTOR 1.8º STEP MOTOR
PACIFIC SCIENTIFIC P21NRXA-LNN-NS-00 STEPPER MOTOR 1.8º STEP MOTOR Is(DC) 2.8 A BIPOLAR SERIES VS(DC) 35V Po 42 W T:90ºC MAX 1500 RPM SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS SV O DRAWER 2 CM
|
|
|
PACIFIC SCIENTIFIC P21NRXS-LSS-NS-03 STEPPER MOTOR 1.8º STEP MOTOR
PACIFIC SCIENTIFIC P21NRXS-LSS-NS-03 STEPPER MOTOR 1.8º STEP MOTOR P/N 0696241 3.6 A BIPOLAR SERIES VS(DC) 35V Po 52 W T:90ºC MAX 1500 RPM SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS SV O DRAWER 3 CM
|
|
|
4 Step Motor Pulley 1/2" Bore Used from Rockwell Delta 11" Wood Lathe #46-111
This is a used Heavy Pot Metal or Alloy 4 step Motor Pulley from a 11" Rockwell Delta Wood Lathe Model#46-11 Serial# DS8771 Made in Pittsburgh PA USA. Bed has a 1 1/4" gap between rails Some wear and tear rust and dust and dirt but in very good condition. It has a 1/2" bore and mounts with 2 set screws. It is about 2 1/2" wide takes 1/2" wide belts. The outside diameters of the steps are about.2 3/8" 3 1/8"3 7/8"and 4 3/8" Local Pick-up Available I will combine shipping on multiple purchases when practical. Please complete bidding then request a combined invoice. I Make Every effort to package each item and safe and secure as possible* I insure most items depending on method of shipment and fragility of the item. The USPS will occasionally damage or lose an item or.Break a box open and lose all ... moreor part of the contents.USPS requires that a buyer complete a damage report and bring the item to their local Post Office. It is faster to file a claim locally but if you prefer I can file it on-line if you send me pictures of the damaged box and items. i will file the claim when approved you can return the item and I will refund your money# Do NOT throw out the original box packing and contents! 14-014
|
|
 |