|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: United States The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip ... morePWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
Buy It Now
$6.00 Shipping Condition: New Location: China CNC Router Single One Axis 3.5A TB6560 Stepper Motor Driver Controller Board SKU:A88# Description TB6560AHQ is the stepper motor driver chip. The chip ... moreis highly integrated, simple peripheral circuits. High reliability, and part of the motor 57 for driving stepping motor 86, when the largest segment range from 0 rpm to a speed of 300 rpm. Features* high integration and high reliability of the stepping motor driver* interface with ultra high speed optical isolators* High anti-jamming capability* The maximum drive current of 3.5A( peak) Main function* whole-step. 1/ 2, 1/ 8, 1/ 16 segments. step by step adjustable current 0.5-3A* Automatic overheat protection* Optional automatic semi- flow* Adjustable current decay fourth gear* LED indicates power and working status* Support for offline. Enable. Lock etc. Package list: 1* Single Axis 3A TB6560AHQ Stepper Motor Driver Board NOTE We try our best to make every transaction perfectly, just for winning your F ive-Star rating. If you have any dissatisfaction. Please contact us. We will give you the most satisfactory results. PLEASE don't leave a neutral or negative easily. Shipping Item will be shipped within 24 hours on payment received from Hong Kong using Airmail. Only shipped to buyer's PayPal address. Please confirm with your PayPal address before you bid. Delivery time depends on destination and other factors. It may takes up to 30 business days. Optionally. Express Shipments with tracking service via EMS/DHL/UPS with a quoted delivery time of 5 to 7 business days is also available. Here is the estimated time for your reference only: Country Delivery Time Working Days(not including holiday) 5-7 8-10 11-14 15-19 20-25 30 Working Days + Saturday + Sunday 5-9 10-14 15-20 21-25 26-35 40 United States Rate(item arrived) 9% 50% 21% 13% 7% Refund or Resend United Kingdom Rate(item arrived) 10% 62% 20% 3.5% 4.5% Refund or Resend Australia Rate(item arrived) 23% 50% 13% 8% 6% Refund or Resend Europe(Exclude Russia) Rate(item arrived) 2.5% 2
Buy It Now
Free Shipping Condition: New Location: Fontana, United States Firmware: GRBL. This mother board is designed with cutting-edge features to create new possibilities to your 40W laser engraving machine. Compatible Software: ... moreLightBurn (Windows/Linux/MacOS). This motherboard is compatible withregular K40/ K40 with ribbon cable, which is not support lightburn function before.
Buy It Now
$10.00 Shipping Condition: New Location: 金东区, China Support software: Candle (3-axis); La ser GRBL (la ser). The toggle switch can switch XYY/XYZ axis work. Can be used on la ser engraving machines, drawer ... moremachines, CNC engraving machines, etc. Toggle to switch XYY/XYZ axis work, toggle the power switch, safe and efficient.
Buy It Now
$8.00 Shipping Condition: New Location: Sacramento, United States The onboard relay will switch a low current power source to turn on a 25 amp 24-480 vac solid state relay that turns on your 0-5 amp spindle/vacuum/pump ... moremotor. For 8 amp to 20 amp spindle or pump motors, use the 60 amp KIT.
Buy It Now
$3.00 Shipping Condition: New Location: China Maybe you also interested it: CNC Router Single 1 Axis Controller Stepper Motor Drivers TB6560 3A driver board From Hong Kong. Stepper Motor Drive Controller ... moreBoard Module L298N Dual H Bridge DC For Arduino From Hong Kong. Stepper Motor Drive Module L298N Dual H Bridge DC +28BYJ-48 5V Stepper Motor DC From Hong Kong. Stepper Motor Drive Controller Board Module L298N Dual H Bridge DC For Arduino From Hong Kong. ULN2003AN ULN2003 Stepper Motor Driver Board Module for Arduino AVR ARM SMD L9110S H-bridge Stepper Motor Dual DC motor Driver Controller Board for Arduino From Hong Kong. 28BYJ-48 Valve Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction For Arduino From Hong Kong. 5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase From Hong Kong. Motor Drive Shield Expansion Board L293D For Arduino Duemilanove Mega2560 UNO From Hong Kong. StepStick Stepper motor driver A4988 A4983 3D Printer driver module Reprap Prus From Hong Kong. Item Description: 1. Fully support of MACH3 and other computer software support for parallel port control. 2. USB power supply and peripherals powered phase separation to protect computer security. 3. Peripheral wide voltage input,12-24V, and anti-reverse function. 4. All of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security. 5. All the way to the relay output port, control spindle switch. Output port P17 mouth. 6. All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port. 7. Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled. 8. P1 as PWM outputs can be controlled with optocoupler input spindle governor. 9. Can be accessed by a common cathode or common anode input level to 5V drive. Downlo ad We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is ve
Buy It Now
$3.99 Shipping Condition: New Location: China Support for connecting electronic handwheel. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;. 4 general-purpose ... moreinputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.
Buy It Now
Free Shipping Condition: New Location: United States 3 Axis TB6560 CNC Stepper Motor Driver Board 1.5A-3A*NEW* 3 Axis TB6560AHQ Stepper Motor Driver Controller Product Features: Toshiba TB6560AHQ chip- High ... morepower. Maximum 3.5A drive current chipset! 1-1/16 microstep setting- Higher accuracy and smoother operation than standard 1. 1/2 step, Adjustable 1.5A-3A drive current settings for each axis- 25%50%75%100% of full current can be set for different stepper motors*Attention: This driver is 1.5A-3A version. Which is specially designed for stepper motors with rated current from 1.5A to 3A. It's NOT compatible with stepper motors with rated current below 1.5A or above 3A. If the rated current your stepper motors is below 1.5A. You can choose the 0.5A-2.5A version. Please let us know which version(1.5A-3A version is default) you need immediately after placing an order. Overload. Over-current and over-temperature safety- Full protection for your computer and peripheral equipment. On board current switching- Power output can be set according to specific user requirement. Full closed-type optical isolation to protect the user's computer and equipment. Relay spindle interface- Outputs Max. 36V 7.5A for spindle motors or coolant pump(only one device can be powered by this output! 4 channel inputs interface- Can be used for XYZ limit and emergency stop. Professional design- Two stage signal processing with super anti-jamming. Bipolar constant current chopper drive with non-resonant region- Controls motors smoothly through range without creep effect. Four-input Control; Allow setting the Limit. Emergence-Stop, Midpoint-Alignment, Cutter-Alignment. Universal architecture- Supports most parallel software MACH3.KCAM4 etc. For compatibility with other softwares. Please feel free to contact us. Dip settings: Current Setting 1 2 Decay Mode Settings 3 4 MicroStep Settings 5 6 100% ON, ON, FAST, ON, ON, 1, ON, ON, 75% ON, OFF, 25% ON, OFF, 1/2, ON, OFF, 50% OFF, ON, 50% OFF, ON, 1/8, OFF, ON, 25% OFF, OFF, SLOW, OFF, OFF, 1/16, OFF, OFF, Further Deta
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 3 PCS Nema 34 stepper motor with Single shaft, 1600oz. in, biloar. 3 PCS Stepper motor driver, peak 7.8A 24-80VDC. Nema 34 stepper motor Hording torque ... morewhen DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 3 pcs Nema 23 stepper motor 270 oz.in,3A, 4 leads bioplar. Nema 23 stepper motor without creep effect! • Driver output compatible with 2 or4 phase, 4,6 ... moreor 8 lead stepper motors, 3A max. stepper motors.
Buy It Now
Free Shipping Condition: New Location: China Cancel the drive module,use integrated imported stepper motor drive,with short circuit protection,and integrated heat dissipation aluminum alloy;. Add ... morethe fan port to force heat dissipation;. Improved USB interface: The original USB interface is patch soldering, transport collision and improper use, easy to drop, now changed to plug-in, very strong;.
Buy It Now
Free Shipping Condition: New Location: Kansas City, United States Feature: This USB motion card does not need install any USB driver, Windows2000/XP/Windows7,can directly identify. 4-axis linkage, Maximum step-pulse ... morefrequency: 100KHz, support connect four stepper motor drives or servo drives.
Buy It Now
$3.00 Shipping Condition: New Location: China Model Number: MACH3 USB 3 axis. - 1 x USB MACH3 3 Axis card. - Frequency: 100KHZ. - Motor type: Stepper Motor. Support for 3-axis linkage, you can connect ... morefour stepper motor drives or servo drives.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Gecko G540 20AWG 13ft. Pro Shielded Motor Cables (Made With Signal Cable) - YouTube. MythBusted Stepper Motor Accuracy Less Than. 001in! Gecko G540 - ... moreYouTube. This kit also includes three of my 13ft.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China QUALITY-GADGETS eBay Item! New-type CNC Router Lathe 1 Axis TB6600HG Stepping Motor Driver Board TB1H. 5A The Latest 1 Axis TB6600HG Microstep Motor Driver ... more0.2A-5.0A( TB1H) Descriptions: The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover. The brand new design with BiCD0.13(50V) process technology on the chipset also ensures maximum 5.0A output current and 50V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 and Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver. Click here for the comparison between TB6560AHQ and TB6600HG Chipset. Click here for more details about the TB6600HG Chipset. Features: High performance. Cost-effective. Automatic idle-current reduction. Supply voltage up to 50V DC Output current up to 5.0A. Suitable for 2-phase and 4-phase motors. High speed optoelectronic isolation signal input. Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency. 1. 2, 4(New Mode) 8, 16 adjustable microstep control, motors run more precisely and smoothly. Equipped with the 3rd generation of breakout board. Display panel and control pad to control the motor manually. Overload. Overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices. Cooling Aluminium Box Design for Cooling. And protect the driver board from being damaged by dirt, dust or other liquids. Applications: For processing various pattern mould. For advising. Such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc. For carving portrait. Scenery, handwriting, sealing, etc. Suitable for any small-and-medium automatic equipment with CNC controller. Such as X-Y-Z tables, labeling machines
Free Shipping Condition: New Location: China Install GRBL 1.1 firmware. --Integrated 3pcs A4988 drivers, directly connect to four wire stepper motor. support XYZ axis, double Yaxis. for Laser Engraving ... moremachine, Drawer Machine, CNC Engraving Machine etc.
Buy It Now
Free Shipping Condition: New Location: United States 4 pc Stepper motor driver High Perfermance Stepper Driver DM860A Up to7.8A, 24-80VDC With Fan. Hording torque when DM860A run under high speed is also ... moresignificantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Support connection with electronic handwheel. The maximum step pulse frequency is 100KHz, suitable for servo or stepper motors;. Unplug the USB cable! ... moreAs long as you unplug the USB cable, the machine will automatically stop.
Buy It Now
Free Shipping Condition: New Location: 金东区, China Stepper motor: X/Y1/Y2/Z. Connection: USB cable. 1 x USB cable. The real color of the item may be slightly different from the pictures shown on website ... morecaused by many factors such as brightness of your monitor and light brightness.
Buy It Now
Free Shipping Condition: New Location: United States Support for connecting electronic handwheel. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;. 4 general-purpose ... moreinputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.
Buy It Now
Free Shipping Condition: New Location: 金东区, China 5> Take away the tool setting device, the tool setting has been completed, and the table corresponds to the Z-axis coordinate 0. The real color of the ... moreitem may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China 3 Axis TB6560 CNC Stepper Motor Driver Board 1.5A-3A*NEW* 3 Axis TB6560AHQ Stepper Motor Driver Controller Product Features: Toshiba TB6560AHQ chip- High ... morepower. Maximum 3.5A drive current chipset! 1-1/16 microstep setting- Higher accuracy and smoother operation than standard 1. 1/2 step, Adjustable 1.5A-3A drive current settings for each axis- 25%50%75%100% of full current can be set for different stepper motors*Attention: This driver is 1.5A-3A version. Which is specially designed for stepper motors with rated current from 1.5A to 3A. It's NOT compatible with stepper motors with rated current below 1.5A or above 3A. If the rated current your stepper motors is below 1.5A. You can choose the 0.5A-2.5A version. Please let us know which version(1.5A-3A version is default) you need immediately after placing an order. Overload. Over-current and over-temperature safety- Full protection for your computer and peripheral equipment. On board current switching- Power output can be set according to specific user requirement. Full closed-type optical isolation to protect the user's computer and equipment. Relay spindle interface- Outputs Max. 36V 7.5A for spindle motors or coolant pump(only one device can be powered by this output! 4 channel inputs interface- Can be used for XYZ limit and emergency stop. Professional design- Two stage signal processing with super anti-jamming. Bipolar constant current chopper drive with non-resonant region- Controls motors smoothly through range without creep effect. Four-input Control; Allow setting the Limit. Emergence-Stop, Midpoint-Alignment, Cutter-Alignment. Universal architecture- Supports most parallel software MACH3.KCAM4 etc. For compatibility with other softwares. Please feel free to contact us. Dip settings: Current Setting 1 2 Decay Mode Settings 3 4 MicroStep Settings 5 6 100% ON, ON, FAST, ON, ON, 1, ON, ON, 75% ON, OFF, 25% ON, OFF, 1/2, ON, OFF, 50% OFF, ON, 50% OFF, ON, 1/8, OFF, ON, 25% OFF, OFF, SLOW, OFF, OFF, 1/16, OFF, OFF, Further Deta
Buy It Now
Free Shipping Condition: New Location: China The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and ... morelight brightness. XYZ, double Yaxis:support. Material: PCB.
Buy It Now
$5.15 Shipping Condition: New Location: Coppell, United States It is used in many different CNC and other automated systems and - in our case - in the Zhuo Mao ZM-R6200 / ZM-R6200C BGA rework stations. This is the ... morebest warranty we can give. We will not try and lie we test each individual part.
Buy It Now
Free Shipping Condition: New Location: China template LeadShine MA860H Microstep Driver 2/4 Phase Stepper Driver VAC18V-80V Description: The MA860H Stepper Driver Board Controller is a high performance ... moremicrostepping driver based on pure-sinusoidal current control technology. With this technology and the self-adjustment technology(self-adjust current control parameters) for different motors. The drive motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors, so the Nema23, Nema34 and Nema42 stepper motors with a 2.6A-7.2A current will be suitable. Suitable for any small-and-medium automatic equipment with CNC controller. Such as X-Y tables, labeling machines, laser cutters, engraving machines, and pick-place devices•Suitable for a wide range of stepping motors. From NEMA size 23 to 42•For processing various pattern mould•For advising. Such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc. For carving portrait. Scenery, handwriting, sealing, etc. Features: 1.High performance. Cost-effective 2.Supply voltage from"18V AC to 80V AC" or"24V DC to 110V DC" 3.Output current from 2.6A to 7.2A 4.Self-adjustment technology. Full to half current self-adjustment when motors from work to standstill via switching off SW4 5.Pure-sinusoidal current control technology 6.Pulse input frequency up to 300 KHz 7.TTL compatible and optically isolated input 8.Automatic half-current reduction as long as switching off SW4 when motors stop 9.16 selectable resolutions in decimal and binary. Up to 51,200 steps/rev 10.Suitable for 2-phase and 4-phase motors 11.Support PUL/DIR and CW/CCW modes 12.Short-voltage. Over-voltage, over-current and short-circuit protection, protect the PC, motors, driver etc from being damaged 13.External Fan Design to avoid overheat What in Package: 1 x MA860H Stepper Motor Driver 1.Your valid phone number is very necessary f
Buy It Now
Free Shipping Condition: New Location: 金东区, China Stepper motor: X/Y1/Y2/Z. Connection: USB cable. 1 x USB cable. After the electrical connection is completed, turn on the power. The real color of the ... moreitem may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Buy It Now
$2.37 Shipping Condition: Brand New Location: China 5 Axis Breakout Board Item Description Features: 1. Fully support of MACH3 and other computer software support for parallel port control. 2. USB power ... moresupply and peripherals powered phase separation to protect computer security. 3. Peripheral wide voltage input,12-24V, and anti-reverse function. 4. All of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security. 5. All the way to the relay output port, control spindle switch. Output port P17 mouth. 6. All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port. 7. Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled. 8. P1 as PWM outputs can be controlled with optocoupler input spindle governor. 9. Can be accessed by a common cathode or common anode input level to 5V drive. Package included: 1X 5 Axis Breakout Board 1X USB cable Payment Description* We do only accept PayPal. We only ship to PayPal confirmed address. For international buyers. We only ship to PayPal verified users. So before bidding, please kindly verify your PayPal account. Shipping Description Note: We will repackage this item to reduce shipping weight and also paper. Bag waste. We guarantee the item will be treated well, and also protected well. Please help US reduce waste, Let us protect the environment together! Thanks. Some units may have minor scuffs/ scratches from being bulk shipped to warehouse. We guarantee the product is new. We ship this item from US We offer Best Price and Fast Shipping Domestic Shipping: We ship to United States including APO/FPO addresses. Puerto Rico, Hawaii, Virgin Islands, etc. with delivery confirmation numbers. We use USPS service or UPS Mail Innovation(USPS Services) Shipping time is estimated in 5- 9 Days. We are not responsible for service transit time. This information is provided b
Buy It Now
$9.85 Shipping Condition: New Location: Canada
Buy It Now
$11.00 Shipping Condition: New Location: China 1 x TB6560 4 Axis Stepper Motor Driver board H Type. CNC stepper motor driver board TB6560 the new chip TB6560AHQ of TOSHIBA, the max ouput peak current ... morecan reach to 3.5A, this driver board can drive the 2-phase or 4-phase stepper motor whose current is less than 3A.
Buy It Now
$3.00 Shipping Condition: New Location: China Model Number: USB CNC 4 Axis MDK2. - Motor type: Stepper Motor. - 1 x 4-Axis USB CNC Breakout Board. - Slave axes. - 1 x USB cable. - USB connection. ... more- 100 kHz maximum step frequency. - 7 digital outputs on board.
Buy It Now
$3.00 Shipping Condition: New Location: China Support for connecting electronic handwheel. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;. 4 general-purpose ... moreinputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Standard ... moreDriver Board is equipped with TB6560AHQ chip.
Buy It Now
$30.00 Shipping Condition: New Location: United States CW5045 high microstep stepper motor driver. 4 x23HS2430B Nema23 stepper motor (Dual Shaft) 112mm,425oz-in,2.8N.m,3.0A. 4 xCW5045 stepper motor driver ... more24-50V,4.5A,256microstep. 1 x5 Axis breakout board V5 type.
Buy It Now
Free Shipping Condition: New Location: Portland, United States Can support 6 axis stepper systems maxisim,125KHz pulse output for every axis;. Style 6 Axis. Stepper motor driver port. ♞【PWM output】1 port 0-10V spindle ... morespeed analog output interface(can change to PWM output);.
Buy It Now
Free Shipping Condition: New Location: United States Mach3 6 Axis USB Joystick Rocker Handheld Electronic Handwheel for CNC Carver US. - The joystick can be directly connected to USB port on PC. - Industrial ... moreMach CNC carving machine joystick is specially designed for Mach system.
Buy It Now
Free Shipping Condition: New Location: China GRBL 1.1f firmware, stable performance. Double Y axis, all-round use. Turn Signal Light. Support limit switch, tool setting, steering gear, cooling fan ... moreand other functions. Circuit board size: 100mmx86mm (3.93in x 3.39in).
Buy It Now
Free Shipping Condition: New Location: 金东区, China GRBL Contol/Candle(3 axi)/Universal Gcode Sender; Support System: XP/7/8/10. Application ：Mainly suitable for GRBL engraving machines such as 3018,3018 ... morepro,3018 pro max,1610 pro or other CNC machines.
Buy It Now
Free Shipping Condition: New Location: United States Support for connecting electronic handwheel. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;. 4 general-purpose ... moreinputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 1 pcs Nema 34 stepper motor with dual shaft, 1600oz. in, biloar. Hording torque when DM860A run under high speed is also significantly higher than the ... moreother two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping Condition: New Location: 金东区, China Support connection of electronic handwheel. The maximum step pulse frequency is 100KHz, suitable for servo or stepper motors;. 1 status LED to indicate ... morethe connection status on the board. 1 x USB cable.
Buy It Now
Free Shipping Condition: New Location: China Support for connecting electronic handwheel;. 1 x 4 Axis USB Mach3 Motion Card STB4100 V2.1 (red color). Mach3 USB Motion Card STB4100 V2.1. This USB ... moremotion card does not need install any USB driver,Windows2000/XP/Windows7,can.
Buy It Now
$12.90 Shipping Condition: New Location: Hoffman Estates, United States Works directly with Mach3, Mach4. Works through Ethernet. It simulates 3 parallel ports. Generates pulse rates of up 4Mhz. External Enable Pin (EN). Status ... moreLEDs on all inputs and output connections.
Buy It Now
Free Shipping Condition: New Location: United States Support for connecting electronic handwheel. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and ... moreother device. 1 status LED, indicate connection status on the board.
Buy It Now
$2.00 Shipping Condition: New Location: China 1 x 5 Axis Interface Breakout Board V5 type. 5 axis CNC Breakout board interface adapter board V5 type. B(Fifth axis)pulse signal. X(First axis) pulse ... moresignal. X(First axis) direction of the signal. It is with relay port to contro the cnc spindle.
Buy It Now
$2.99 Shipping Condition: New Location: China Maybe you also interested it: CNC Router Single 1 Axis Controller Stepper Motor Drivers TB6560 3A driver board From Hong Kong. Stepper Motor Drive Controller ... moreBoard Module L298N Dual H Bridge DC For Arduino From Hong Kong. Stepper Motor Drive Module L298N Dual H Bridge DC +28BYJ-48 5V Stepper Motor DC From Hong Kong. Stepper Motor Drive Controller Board Module L298N Dual H Bridge DC For Arduino From Hong Kong. ULN2003AN ULN2003 Stepper Motor Driver Board Module for Arduino AVR ARM SMD L9110S H-bridge Stepper Motor Dual DC motor Driver Controller Board for Arduino From Hong Kong. 28BYJ-48 Valve Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction For Arduino From Hong Kong. 5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase From Hong Kong. Motor Drive Shield Expansion Board L293D For Arduino Duemilanove Mega2560 UNO From Hong Kong. StepStick Stepper motor driver A4988 A4983 3D Printer driver module Reprap Prus From Hong Kong. Item Description: 1. Fully support of MACH3 and other computer software support for parallel port control. 2. USB power supply and peripherals powered phase separation to protect computer security. 3. Peripheral wide voltage input,12-24V, and anti-reverse function. 4. All of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security. 5. All the way to the relay output port, control spindle switch. Output port P17 mouth. 6. All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port. 7. Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled. 8. P1 as PWM outputs can be controlled with optocoupler input spindle governor. 9. Can be accessed by a common cathode or common anode input level to 5V drive. Downlo ad We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is ve
Buy It Now
Free Shipping Condition: New Location: China DC 12V 24V MKS OSC Stepper Motor Pulse Signal Generator Module For Stepper Motor. The output is P17. for LEGION GO Joystick Holder Protect Case Handheld ... moreRight Seat TPU Soft rubber. The output is P1.
Buy It Now
Free Shipping Condition: New Location: 中原区, China Peak wavelength: 450NM. 1 Laser driver(Not including laser).
Buy It Now
$2.88 Shipping Condition: New Location: China CNC Router Single 1 Axis Controller Stepper Motor Drivers TB6560 3A driver board, Photo: Description: Features: Working voltage DC 10V-35V. Recommended ... moreto use a switching power supply DC24V power supply. 6N137 high-speed optical coupling. Guarantee high speed without losing step. using the Toshiba TB6560AHQ new original chip with low voltage shutdown. Overheating stop and overcurrent protection circuit to ensure optimal performance. Rated maximum output: ± 3A. Peak 3.5A. for two-phase within 42.57 stepping 3A/ four-phase/ of line four/ six-wire stepper motor, and is not suitable for more than 3A stepper motor. automatic half current function. subdivision: whole step. Half-step, step 1/8, 1/16 step, a maximum of 16 subdivisions. Dimensions: width 50* 75* long high-35(MM) Features similar products: 1. Current grade-by-adjustable to meet your demand for a variety of applications. 2. Semi-automatic flow adjustable. 3 6N137 high-speed optical coupling. Guarantee high speed without losing step. 4. Plate printed setup instructions operation without manual also. 5. Thick teeth radiator, good heat dissipation. Absolutely use Toshiba TB6560AHQ. New original chip, a penalty at ten! Package Contents 100% Brand New 1x TB6560 3A driver board, Shipping: We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback. So that we can satisfactorily address your concerns. It is impossible to address issues if we do not know about them! Ship by Post Air-mail within 1 working days after full payment is received. The shipment usually takes 12-35 business days to Worldwide. We also provide international Expressed delivery such as EMS. DHL and UPS,extra shipping fees is needed. The shipping time may vary. Depends on receiver's location. Country Delivery Time Working Days(not including holiday) 5-7 8-10 11-14 15-19 20-22 25 Working Days + Saturday + Sunday 5-9 10-14 15-20 21
Buy It Now
$3.00 Shipping Condition: New Location: China Press Z+ and Z-, the Z axis will move up and down. - Press X+ and X-, the X axis will move left and right. - Press Y+ and Y-, the Y axis will move Front ... moreand Back. - 1 x Cable. hope you could understand.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States This mother board is designed with cutting-edge features to create new possibilities to your 40W laser engraving machine. Lightburn Compatible. This motherboard ... moreis not only suitable for regular K40, but also suitable for K40 with ribbon cable.
Buy It Now
$3.20 Shipping Condition: New Location: China 1PC TB6560 3A Driver Board. For two-phase within 42,57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable for more ... morethan 3A stepper motor. Automatic half current function.
Buy It Now
Free Shipping Condition: New Location: United States 3 Axis DIY CNC Kit For Nema17 Nema23 Nema34 Motor TB6600HG Stepper Drivers 5A + 3 Pieces TB6600HG Stepper Driver Board Controller The latest upgraded ... moresalable 5 axis breakout board is specially designed for the CNC single axis stepper driver controller. Such as TB6600HG, M542, M542H, MA560, MA860H, 2M542, 2M982 etc single axis stepper driver controller. With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc. The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover. The brand new design with BiCD0.13(45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps. All the 2 Phase or 4 Phase of Nema17. Nema23, Nema24 and Small-sized Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver. Click here for In short. With this CNC Kit, you will get more benefits from the Kit on CNC work. Please purchase this kit with confidence. High performance. Cost-effective. Maximum support 5-axis stepper motor driver controller. Two types of ways to get power. 5V DC power supply or USB port to directly get power from PC. Two-stage signal processing. Smooth signal transmission, powerful anti-jamming. 5-input interface to define the Limit. Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc. Relay output control interface. Accessed by the spindle motor or the air pump, water pump, etc. 5-axis work LED display. Visually display the working condition of the stepper driver controller. High performance. Cost-effective. Automatic idle-current reduction. Supply voltage up to 45V DC. Output current up to 5.0A. Suitable for 2-phase and 4-phase motors. High speed optoelectronic isolation
Buy It Now
$3.00 Shipping Condition: New Location: China THIS is a 3-axis Mach3 USB interface board (NPN) worked with Mach3. - 16 general digital input points, corresponding to 16 LED indicators. - Support all ... moreversions of Mach3. Supports all versions (32-bit/64-bit).
Buy It Now
Free Shipping Condition: New Location: Bronx, United States It has excellent performance, high speed and high torque output, low noise, low vibration, and low heat. 【Product Introduction ②】The DMA860S driver can ... moreselect the current and subdivision through the DIP switch.
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States The drive current: 2A (best to install the heat sink). 10 Heatsink.
Buy It Now
$9.00 Shipping Condition: New Location: China Q1:why other supplier's TB6560 driver has 3.5A/3A current,but yours is 2.5A?. Supports a lot of stepper motors. 4-wire 0-3.5A normally 3A, the 3.5A is ... morethe peak currentcan be regulated rate current output, bipolar stepper motor driver.
Buy It Now
Free Shipping Condition: New Location: United States Support for connecting electronic handwheel. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;. 4 general-purpose ... moreinputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.
Buy It Now
Free Shipping Condition: New Location: United States Support for connecting electronic handwheel. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;. 4 general-purpose ... moreinputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.
Buy It Now
Free Shipping Condition: New Location: United States Hording torque when DQ860MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. 8 channels output phase current setting.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China QUALITY-GADGETS eBay Item! 3 Axis CNC Stepper Motor Driver TB6560 Box Set + LCD Display + Handle Controller Descriptions I. About the 3rd Generation TB6560 ... moreStepper Controller Box This stepper controller box has been upgraded to an intelligent and industrial-level driver board set. The redesigned PCB board enables smoother control of motors. The totally enclosed optical isolation and bipolar constant-current chopper ensure a low noise& low vibration operation environment. Helping to avoid creeping at a low speed. Internally built manual control tools bring more user friendly experience. It has standard version and professional version to meet different user needs. II. Standard Version VS Professional Version. Functions, Standard Version, Professional Version, Intelligent motor control via PC, Manual motor control via control panel, Intelligent switch between PC and control panel, Synchronous coordinates display on PC and display panel, Real-time tracking of motor moving path, Aluminum housing protection, Automatic G-code recording, Manual G-code programming, III. Two Unique Functions of Professional Version. Automatic G-code recording function With the embedded intelligent memory chip. This stepper driver can easily record MAXIMUM 3 Axis' X.Y,Z Axis) G-code running on the CNC software(e.g. Mach3. EMC2, KCAM4. Etc. of the computer, after which you can run motors using the recorded G-code without computer. Manual G-code programing function. The upgraded built-in manual control tools(display panel and control panel) can not only be used for manual motor control. But also manual G-code programming. Manually programmed G-code will be recorded onto the embedded intelligent memory chip. After which you can easily run motors with recorded G-code. This function is widely applied in RBI machine, Conveyor etc. This package is 3 Axis Professional Version(TB3CD-P(Box) If you need the standard version. Please refer to our related item or simply contact us. PCB Instructions& Specifications Display Panel& Contr
|
|
|
|
Hitachi Seiki 10-54-00-00 CNC Board [PZ2]
ITEM DESCRIPTION. Description: OPSW-MC5, Condition: Refurbished 10-54-00-00 Brochure Precision Zone technicians are experts when it comes to electronic repair. In addition to replacing components. We can diagnose and make repairs at board level. All repaired electronics and printed circuit boards are thouroghly tested in simulator stands and real machines, cleaned and repackaged according to your request. Also we implement the entire NC control rack repair. This item carries Precision Zone standard 90 day Ebay warranty on parts and labor from date of its sale. Terms. Precision Zone ships worldwide and accepts PayPal and most Credit Cards. For Customer Service call 800-551-4420 or 847-465-9060. All items are priced each. All items are subject to availability and passing our QA inspection. NET Terms available to customers of satisfactory credit ... moreafter approval. To avoid delay in filling orders. Purchasers without previous experience with Seller should remit cash, PayPal, or pay with VISA/MasterCard. Customers may be subject to Illinois sales tax. Repair Services Turnaround Time. Standard repair lead time is 5-10 business days after approval. Rush services are available. Ranging from same day to 72 hour rush. Please contact us for pricing and availability on rush repair services. Exchange program available with a wide range of drives on hand at any given time. Same day rush services also available on exchanges. Packaging and Handling. All items are custom packaged to ensure proper safety of unit(s) Items above 80lbs require custom shipping cartons for protection. Customers responsible for additional freight charges. Shipping. Free Domestic(Mainland U.S.A. Excluding Alaska and Hawaii) Shipments: All domestic shipments under 70 lbs are processed via free UPS Ground Service. Domestic shipments over 70 lbs are processed via freight service. Freight and handling fees apply. Contact us for additional freight charges. Alaska. Hawaii and International Shipments: We ship worldwide from Illinois. USA using UPS, FEDEX, DH
|
|
|
Hitachi Seiki 10-44-00-00 CNC Board [PZ2]
ITEM DESCRIPTION. Description: OPSW-L4, Condition: Refurbished 10-44-00-00 Brochure Precision Zone technicians are experts when it comes to electronic repair. In addition to replacing components. We can diagnose and make repairs at board level. All repaired electronics and printed circuit boards are thouroghly tested in simulator stands and real machines, cleaned and repackaged according to your request. Also we implement the entire NC control rack repair. This item carries Precision Zone standard 90 day Ebay warranty on parts and labor from date of its sale. Terms. Precision Zone ships worldwide and accepts PayPal and most Credit Cards. For Customer Service call 800-551-4420 or 847-465-9060. All items are priced each. All items are subject to availability and passing our QA inspection. NET Terms available to customers of satisfactory credit ... moreafter approval. To avoid delay in filling orders. Purchasers without previous experience with Seller should remit cash, PayPal, or pay with VISA/MasterCard. Customers may be subject to Illinois sales tax. Repair Services Turnaround Time. Standard repair lead time is 5-10 business days after approval. Rush services are available. Ranging from same day to 72 hour rush. Please contact us for pricing and availability on rush repair services. Exchange program available with a wide range of drives on hand at any given time. Same day rush services also available on exchanges. Packaging and Handling. All items are custom packaged to ensure proper safety of unit(s) Items above 80lbs require custom shipping cartons for protection. Customers responsible for additional freight charges. Shipping. Free Domestic(Mainland U.S.A. Excluding Alaska and Hawaii) Shipments: All domestic shipments under 70 lbs are processed via free UPS Ground Service. Domestic shipments over 70 lbs are processed via freight service. Freight and handling fees apply. Contact us for additional freight charges. Alaska. Hawaii and International Shipments: We ship worldwide from Illinois. USA using UPS, FEDEX, DHL
|
|
|
OKUMA CNC DRIVE PPS-60C PPS60C TH601 TOP BOARD E4809-747-005-A E4809747005A LMSI
OKUMA PPS-60C TH601 DRIVE TOP BOARD E4809-747-005-A LOT# 914 IF YOU LIKE TO SEE MORE PARTS FOR OKUMA PLEASE CLICK ON THE LINK BELOW. OKUMA BOARDS/ DRIVES& PARTS Payments over $ 2.000 please contact us at 818-899-9000. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, 818 899-9001 or by e-mail. Combined shipping is available. Please click BUY IT NOW on the items you would like to ... morepurchase and allow us to adjust your shipping cost and then proceed with your payment. Will calls( local pick ups) are welcome between 8:00am to 4:00pm by appointment only. We can ship by ups ground. For international shipping costs. Please contact us thru e-bay messages. Leopard Machine Sales return policy unlike many of our competitors we do not have a re-stocking fee of 25% or more. Zero(Zilch) re-stocking fees forever. We accept returns within 7 days from the date you receive your item. After the item is returned to us we will exchange it for another item of the same type if in stock. Otherwise a full refund will be given minus shipping charges. If the same type item is not available we will issue a monetary refund to you provided the criteria below is met. Any item purchased at $ 500.00 or more will require a note from a certified technician stating that the part is non working and that the item was installed by a certified technician( this proof must be on a document and hand signed by the technician. Along with the technician's name, business address and phone no. it may be forwarded to us either by e-mail or fax) We may contact the technician for some information a
|
|
|
OKUMA CNC SDU-600W SDU600W SDU-600-W TOP BOARD E4809-045-019B E4809045019B LMSI
OKUMA SDU-600W SPINDLE DRIVE TOP BOARD E4809-045-019B LOT# 915 IF YOU LIKE TO SEE MORE PARTS FOR OKUMA PLEASE CLICK ON THE LINK BELOW. OKUMA BOARDS/ DRIVES& PARTS Payments over $ 2.000 please contact us at 818-899-9000. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, 818 899-9001 or by e-mail. Combined shipping is available. Please click BUY IT NOW on the items you would like ... moreto purchase and allow us to adjust your shipping cost and then proceed with your payment. Will calls( local pick ups) are welcome between 8:00am to 4:00pm by appointment only. We can ship by ups ground. For international shipping costs. Please contact us thru e-bay messages. Leopard Machine Sales return policy unlike many of our competitors we do not have a re-stocking fee of 25% or more. Zero(Zilch) re-stocking fees forever. We accept returns within 7 days from the date you receive your item. After the item is returned to us we will exchange it for another item of the same type if in stock. Otherwise a full refund will be given minus shipping charges. If the same type item is not available we will issue a monetary refund to you provided the criteria below is met. Any item purchased at $ 500.00 or more will require a note from a certified technician stating that the part is non working and that the item was installed by a certified technician( this proof must be on a document and hand signed by the technician. Along with the technician's name, business address and phone no. it may be forwarded to us either by e-mail or fax) We may contact the technician for some information
|
|
|
Yamazaki M/T Controller CNC PC Board, IPM-400-, Used, WARRANTY
Title: Yamazaki CNC PC Board Description: Our Internal Stock# L31-49(7/9/14 dan) You are about to purchase the following item: Catalog# IPM-400- Serial# S06 M/T Controller Board Made in Japan This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition. Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees ... moreincurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same day payment has cleared
|
|
|
FANUC YANG I/O CIRCUIT BOARD CNC MILL SMV-600-002 SMV600002 SMV600 600002 LMSI
FANUC/ YANG SMV-600-002 LOT# 921 IF YOU WOULD LIKE TO SEE MORE FANUC PARTS. PLEASE CLICK ON THE LINK UNDERNEATH( BELOW) Payments over $ 2.000 please contact us at 818-899-9000. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, 818 899-9001 or by e-mail. Combined shipping is available. Please click BUY IT NOW on the items you would like to purchase and allow us to adjust your shipping ... morecost and then proceed with your payment. Will calls( local pick ups) are welcome between 8:00am to 4:00pm by appointment only. We can ship by ups ground. For international shipping costs. Please contact us thru e-bay messages. Leopard Machine Sales return policy unlike many of our competitors we do not have a re-stocking fee of 25% or more. Zero(Zilch) re-stocking fees forever. We accept returns within 7 days from the date you receive your item. After the item is returned to us we will exchange it for another item of the same type if in stock. Otherwise a full refund will be given minus shipping charges. If the same type item is not available we will issue a monetary refund to you provided the criteria below is met. Any item purchased at $ 500.00 or more will require a note from a certified technician stating that the part is non working and that the item was installed by a certified technician( this proof must be on a document and hand signed by the technician. Along with the technician's name, business address and phone no. it may be forwarded to us either by e-mail or fax) We may contact the technician for some information about the item. We may make an exception
|
|
|
FANUC A16B-1200-0200 CIRCUIT BOARD CNC #1
FANUC CIRCUIT BOARD CNC A16B-1200-0200 PULLED USED FROM WORKING CONTROLLERS SOLD AS IS BECAUSE WE HAVE NO WAY TO TEST INVENTORY GROUP
|
|
|
Anilam Crusader PCB 801 901-175 CNC Control Board Rev E
Anilam Crusader CNC Control Board Model: PCB 801 901-175 Rev E I have more Anilam Boards here: Comes as shown. This item is to be installed by a qualified electrician. Only implied item(s) shown in pictures are included with sale. excluding any or all measuring instruments) Shipping is for the U.S.A. only. For other locations or questions. Please contact me before buying. IF YOU HAVE ANY QUESTIONS PLEASE ASK BEFORE BUYING THIS ITEM! SHIPPING If the shipping discounts are not spelled out in the shipping tab. Then there will be no discounts. If you want to buy several items from different auctions. Please contact us for a quote. Otherwise we might not give a discount. We use USPS for small items up to 70lbs. If it can't go USPS. It will go UPS. If it's freight. It will be your responsibility to get shipping. We can and do use USPS Flat ... moreRate Boxes. If the item fits and is comparable in price(sometimes its cheaper) BUYERS NOTE: WE claim no expertise in the use of this item(s) We accept no responsibility on the correct application or installation of this item(s) This item(s) is to be installed by qualified individuals. By purchasing this item you agree to hold"William and Mary Design" and/or"mainstreebill" only liable for the purchase amount and no other damages. 100% CUSTOMER SATISFACTION IS OUR GOAL. If You have any Questions about this Particular Item. Please Email us. Thank You for Your Business. Loc:125
|
|
|
Excellon Quiet Drill 700 -83849 CNC Spindle 1/2 HP Circuit Board Drill
Up for your consideration is this Excellon Quiet Drill 700 circuit board spindle. Model# 700-83849. 154V. 3A. 3PH. 1/2 HP, 1000HZ. Item shown in images is exactly what you will receive. Drill measures approx. 9.5" in length and 4" wide at base. Mount measures 14.5" overall in length and 4" wide. It is water cooled and has a pneumatic collet closer. It comes with a new drill and both are in excellent condition. This auction starts off at a low price with NO RESERVE! Not happy with your item? Refunds with a smile! That's what I'm talking about!
|
|
|
Bridgeport Controls CNC Milling Machine Control Board
Description You are bidding on"Bridgeport CNC Milling Machine Control Board" The product within the illustrations is the model. Which is being bid on. There are notes on condition please review the entire listing. Sold as is: Yes Includes 1x Bridgeport CNC Milling Machine Control Board Specific Information Bridgeport CNC Milling Machine Control Board: Functionality. Unknown, untested, unable to test. Assume not working for parts. Cosmetically: Dirt and other that would be seen with high use. Button Pad is faded. Scratches on face plate. Please Review Pictures. If more information is needed please contact us. Communication All communication is conducted strictly via the eBay messaging system. If there are any questions or concerns please use the eBay messaging system. We will reply as soon as possible. Would you like more pictures? ... moreAvailable for request via the eBay messaging system. No shipping amount or the calculator is bugged? Available for request via the eBay messaging system. Remember to include zip code. Payment PayPal Only. This is the only accepted payment. Payment is expected within three days of sale. Auction close, commit to buy, invoice. After seven days, any unpaid sale, auction, commit to buy, invoice will be subject to an Unpaid Item Dispute(UPI) through eBay AND cancellation. Shipping Remember. Please check the auctions details for shipping cost or at least a range for shipping item(s) If there are no costs showing in our auction(s) listing(s) please use the eBay messaging system we will try to email a shipping quote in a timely manner. Please remember to include your shipping zip code. Return Policies Returns are accepted. Unless they fall into specific return categories or stated otherwise. When returns are accepted; the product(s) item(s) that were bought within the auction. Must be returned in the same condition as bought in the auction. This would suggest that the product(s) item(s) are completely resalable, contains no damages of any kind and are in the exact condition at the
|
|
|
FANUC A20B-0010-0130 CIRCUIT BOARD CNC #6
FANUC CIRCUIT BOARD CNC A20B-0010-0130 PULLED USED FROM WORKING CONTROLLERS SOLD AS IS BECAUSE WE HAVE NO WAY TO TEST INVENTORY GROUP
|
|
|
FANUC A20B-1000-0560 CIRCUIT BOARD CNC #6
FANUC CIRCUIT BOARD CNC A20B-1000-0560 PULLED USED FROM WORKING CONTROLLERS SOLD AS IS BECAUSE WE HAVE NO WAY TO TEST INVENTORY GROUP
|
|
|
fanuc cnc main board and 2 axis board O-TC control out of a running machine
Fanuc series O-TC main board A208-2000-0170/09B. Memory board A16B-2201-0103/08A, the other two boards are A16B-1212-220, A16B-2200-036 Came out of a runner cnc lathe
|
|
|
Okuma E4809-045-112-C Okuna Opus 5000 TCC-A CNC board 1911-1598
Used Okuma E4809-045-112-C Opus 5000 TCC-A CNC board 1911-1598. Good working condition. No original package. Has some wears of previous installation. For this great item we offer 30 day money back warranty. Returns accepted. Return shipping will be paid by buyer. Buyer may return the product listed at this page within 30 calendar days of the checkout date. Join our store at Facebook®! Why not? On our we publish our listings. Latest updates, deals and other related information. It makes sense. Sometimes it even makes a sense of humour. Our valued customers must accept our store policies. Terms and conditions before checkout. Please read the information below for your convenience. We are determined to provide the most accurate product descriptions possible in order to ensure customer satisfaction. Our sole obligation for all items we sell ... moreis the option to return the fees paid. And in no event shall we be liable for any damages, including, but not limited to, any special, direct, indirect, incidental, exemplary, or consequential damages, expenses, business interruption, lost profits, savings, business information, or any other damages arising out of any repair services or remanufactured goods. Due the nature of our business. We don't have history or type of use of all our items. Sometimes we know it. Sometimes not. Most of our items are pulled(used) from working environment. Unless stated otherwise(the“New” and“New Other” item conditions) We do not include operating systems. Drivers, CD or software unless specified in the description. We are not responsible for any compatibility issues with your working environment. Equipment or software. We do not provide technical support for setup. Installation or any other user-related issues. If something it's not listed. It's not included. The images shown for our listings are taken from a representative items. So for lots with more than one item actual appearance may differ slightly. Please ask us to send you more photos via eBay® messaging system.
|
|
|
A20B-0008-0480/01A Fanuc Memory CNC Board A350-0008-T484/01, WARRANTY 30 days
Used A20B-0008-0480/01A Fanuc Memory CNC Board A350-0008-T484/01. Very good working condition. No original package. For this great item we offer 30 day money back warranty. Returns accepted. Return shipping will be paid by buyer. Buyer may return the product listed at this page within 30 calendar days of the checkout date. Join our store at Facebook®! Why not? On our we publish our listings. Latest updates, deals and other related information. It makes sense. Sometimes it even makes a sense of humour. Our valued customers must accept our store policies. Terms and conditions before checkout. Please read the information below for your convenience. We are determined to provide the most accurate product descriptions possible in order to ensure customer satisfaction. Our sole obligation for all items we sell is the option to return the fees ... morepaid. And in no event shall we be liable for any damages, including, but not limited to, any special, direct, indirect, incidental, exemplary, or consequential damages, expenses, business interruption, lost profits, savings, business information, or any other damages arising out of any repair services or remanufactured goods. Due the nature of our business. We don't have history or type of use of all our items. Sometimes we know it. Sometimes not. Most of our items are pulled(used) from working environment. Unless stated otherwise(the“New” and“New Other” item conditions) We do not include operating systems. Drivers, CD or software unless specified in the description. We are not responsible for any compatibility issues with your working environment. Equipment or software. We do not provide technical support for setup. Installation or any other user-related issues. If something it's not listed. It's not included. The images shown for our listings are taken from a representative items. So for lots with more than one item actual appearance may differ slightly. Please ask us to send you more photos via eBay® messaging system.
|
|
|
Mitsubishi Meldas MC301B PLC control board cnc lathe/mill 320 325 330 lgv m B
Mitsubishi Meldas MC301B PLC control board complete brick. S/N: CIN624A822G52A Rev C Condition: NO CRACKS ANYWHERE- Used. Fully tested and in good working condition guaranteed. Location: Promega CNC Parts Warehouse, Aiken, SC Free Shipping, UPS insured. SAME DAY SHIPPING ON ORDERS PLACED BEFORE 3PM EST.
|
|
|
XPS-452B Okuma CN Board OSP5000G PNL EUA-1C0502 EUA-IC0502 for Okuma LC-20 CNC
Used XPS-452B Okuma CN Board OSP5000G PNL EUA-1C0502 EUA-IC0502 for Okuma LC-20 CNC. Good working condition. No original package. For this great item we offer 30 day money back warranty. Returns accepted. Return shipping will be paid by buyer. Buyer may return the product listed at this page within 30 calendar days of the checkout date. Join our store at Facebook®! Why not? On our we publish our listings. Latest updates, deals and other related information. It makes sense. Sometimes it even makes a sense of humour. Our valued customers must accept our store policies. Terms and conditions before checkout. Please read the information below for your convenience. We are determined to provide the most accurate product descriptions possible in order to ensure customer satisfaction. Our sole obligation for all items we sell is the option to ... morereturn the fees paid. And in no event shall we be liable for any damages, including, but not limited to, any special, direct, indirect, incidental, exemplary, or consequential damages, expenses, business interruption, lost profits, savings, business information, or any other damages arising out of any repair services or remanufactured goods. Due the nature of our business. We don't have history or type of use of all our items. Sometimes we know it. Sometimes not. Most of our items are pulled(used) from working environment. Unless stated otherwise(the“New” and“New Other” item conditions) We do not include operating systems. Drivers, CD or software unless specified in the description. We are not responsible for any compatibility issues with your working environment. Equipment or software. We do not provide technical support for setup. Installation or any other user-related issues. If something it's not listed. It's not included. The images shown for our listings are taken from a representative items. So for lots with more than one item actual appearance may differ slightly. Please ask us to send you more photos via eBay® messaging system.
|
|
|
A20B-0008-0480/02A Fanuc Memory CNC Board A350-0008-T484/01, WARRANTY 30 days
Used A20B-0008-0480/02A Fanuc Memory CNC Board A350-0008-T484/01. Very good working condition. No original package. For this great item we offer 30 day money back warranty. Returns accepted. Return shipping will be paid by buyer. Buyer may return the product listed at this page within 30 calendar days of the checkout date. Join our store at Facebook®! Why not? On our we publish our listings. Latest updates, deals and other related information. It makes sense. Sometimes it even makes a sense of humour. Our valued customers must accept our store policies. Terms and conditions before checkout. Please read the information below for your convenience. We are determined to provide the most accurate product descriptions possible in order to ensure customer satisfaction. Our sole obligation for all items we sell is the option to return the fees ... morepaid. And in no event shall we be liable for any damages, including, but not limited to, any special, direct, indirect, incidental, exemplary, or consequential damages, expenses, business interruption, lost profits, savings, business information, or any other damages arising out of any repair services or remanufactured goods. Due the nature of our business. We don't have history or type of use of all our items. Sometimes we know it. Sometimes not. Most of our items are pulled(used) from working environment. Unless stated otherwise(the“New” and“New Other” item conditions) We do not include operating systems. Drivers, CD or software unless specified in the description. We are not responsible for any compatibility issues with your working environment. Equipment or software. We do not provide technical support for setup. Installation or any other user-related issues. If something it's not listed. It's not included. The images shown for our listings are taken from a representative items. So for lots with more than one item actual appearance may differ slightly. Please ask us to send you more photos via eBay® messaging system.
|
|
|
E4809-045-113 Okuma TCC board for Nakamura TMC-4 CNC Lathe with 2 connectors
Used E4809-045-113 Okuma TCC board for Nakamura TMC-4 CNC Lathe. Working condition. No original package. For this great item we offer 30 day money back warranty. Returns accepted. Return shipping will be paid by buyer. Buyer may return the product listed at this page within 30 calendar days of the checkout date. Join our store at Facebook®! Why not? On our we publish our listings. Latest updates, deals and other related information. It makes sense. Sometimes it even makes a sense of humour. Our valued customers must accept our store policies. Terms and conditions before checkout. Please read the information below for your convenience. We are determined to provide the most accurate product descriptions possible in order to ensure customer satisfaction. Our sole obligation for all items we sell is the option to return the fees paid. And ... morein no event shall we be liable for any damages, including, but not limited to, any special, direct, indirect, incidental, exemplary, or consequential damages, expenses, business interruption, lost profits, savings, business information, or any other damages arising out of any repair services or remanufactured goods. Due the nature of our business. We don't have history or type of use of all our items. Sometimes we know it. Sometimes not. Most of our items are pulled(used) from working environment. Unless stated otherwise(the“New” and“New Other” item conditions) We do not include operating systems. Drivers, CD or software unless specified in the description. We are not responsible for any compatibility issues with your working environment. Equipment or software. We do not provide technical support for setup. Installation or any other user-related issues. If something it's not listed. It's not included. The images shown for our listings are taken from a representative items. So for lots with more than one item actual appearance may differ slightly. Please ask us to send you more photos via eBay® messaging system. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%
|
|
|
A20B-0008-0480 Fanuc Memory CNC Board A350-0008-T484/02, WARRANTY 30 days
Used A20B-0008-0480 Fanuc Memory CNC Board A350-0008-T484/02. Very good working condition. No original package. For this great item we offer 30 day money back warranty. Returns accepted. Return shipping will be paid by buyer. Buyer may return the product listed at this page within 30 calendar days of the checkout date. Join our store at Facebook®! Why not? On our we publish our listings. Latest updates, deals and other related information. It makes sense. Sometimes it even makes a sense of humour. Our valued customers must accept our store policies. Terms and conditions before checkout. Please read the information below for your convenience. We are determined to provide the most accurate product descriptions possible in order to ensure customer satisfaction. Our sole obligation for all items we sell is the option to return the fees paid. ... moreAnd in no event shall we be liable for any damages, including, but not limited to, any special, direct, indirect, incidental, exemplary, or consequential damages, expenses, business interruption, lost profits, savings, business information, or any other damages arising out of any repair services or remanufactured goods. Due the nature of our business. We don't have history or type of use of all our items. Sometimes we know it. Sometimes not. Most of our items are pulled(used) from working environment. Unless stated otherwise(the“New” and“New Other” item conditions) We do not include operating systems. Drivers, CD or software unless specified in the description. We are not responsible for any compatibility issues with your working environment. Equipment or software. We do not provide technical support for setup. Installation or any other user-related issues. If something it's not listed. It's not included. The images shown for our listings are taken from a representative items. So for lots with more than one item actual appearance may differ slightly. Please ask us to send you more photos via eBay® messaging system.
|
|
|
JAPAX DP45 CNC EDM POWER SUPPLY CIRCUIT BOARD NPC-10
JAPAX EDM CNC CIRCUIT BOARD PULLED FROM MACHINE BEING PARTED OUT FOR MECH ISSUES MODEL NPC-10 SEE PICTURES THANKS FOR LOOKING! INVENTORY LOCATION:SHELF 24 ROW A BOX J1
|
|
|
High Speed Parallel CNC 6axis Interface Board Module MACH3 Carving Machine e
High Speed Parallel CNC 6-axis Interface Board Module MACH3 Carving Machine Description: High Speed Parallel CNC 6-axis Interface Board Module MACH3 Carving Machine Introduction: CNC 6-axis interface port V3.4. Could realize CNC software connect, control CNC devices and I/O function by computer parallel port. Built-in DC-DC isolated power supply, could be completely isolated by single power supply. SMD production, stable performance and easy installation. Features: Support MACH3 and other host software that support parallel port control- Completely optocoupler isolation for input/output signal. Signal output frequency up to 10M- With charge pump function- Two channel relay output port. Could connect 10A devices. Manual control output port. Built-in integrated pulse generator. All input/output signal with photoelectric indicator- Tranducer ... more1-10V analog voltage output. Could control tranducers with analog port- 17 data transmission pin. Max.could control six-axis driver- Limit switch connect with logic circuit. Shipping& Payment: Here Offer 100% Satifiation Service.Inlucde re-send item&refund payment; All items here offer 1 year warranty It is not my Duty for Custom Tax All items will be shipped via int'l air mail( no tracking number for items under $65) The time normally takes 7-15 business days. may be later arrivel if the item is checked by custom; We only accept paypal payment. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-147afa388bf-0x10b-
|
|
|
HITACHI BGD0104 CNC BOARD 067 111 113 & 002 038 079 098
HITACHI BGD0104 CNC BOARD. 067 111 113& 002 038 079 098 Condition: EXCELLENT Tested& guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EMCO CNC stepper drive board F1A 113 001
EMCO CNC F1 milling machine stepper drive board F1A 113 001 Taken from working machine. Untested as is condition. Ships to USA only.
|
|
|
EMCO CNC main board FIA 114 001
EMCO CNC F1 milling machine main board FIA 114 001 Taken from working machine. Untested as is condition. Ships to USA only.
|
|
|
EMCO CNC PC board A6C403010
EMCO CNC PC board A6C403010 MODIFIED FRO USE WITH MACH3 Jumpers installed in place of U1 chip and other jumper wires on bottom. Untested as is condition. See mach support.com/forum/index.php?action.topic. for more information. Ships to USA only.
|
|
|
TRUDRIL TRU-MICRO 300 PRECISION CNC CIRCUIT BOARD DRILL
TRUDRIL TRU-MICRO 300 PRECISION DRILL SINGLE SPINDLE WITH VIDEO CAMERA SYSTEM UNTESTED AS IS Powered by The free listing tool. List your items fast and easy and manage your active items. 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-147c36b576e-0x106-
|
|
|
EMCO COMPACT 5 CNC Welturn Control board
its a sad story. The 5v supply went on my EMCO Compact 5 CNC Lathe, so i decided to gut it and replace the electronics. how difficult can it be? and here we have the Welturn convertion control board. The lathe was used a few time last year but this year. When i turn the Lathe on it did not spring into life. investigation showed no power to this board from the main power supply. because it was not removed from a working machine it must be sold as seen. Spares or repair. I do have the original welturn CD and fill include this if i can find it. International bidders. Please ask for a quote first, before bidding. please check out my other emco boards.
|
|
|
GE REG8C PC Board for GE 1050 CNC 44A399746-G01
Description: GE REG8C Power Supply Board for 1050 CNC. 44A399746-G01. This item was repaired, recapped and bench tested. Very good condition. Warranty: 14 day money back guarantee. Payment: Paypal only please. Payment must be made within 3 days. Shipping: Fees in listing apply to continental US only. If you need expedited shipment or are an international buyer please contact me. Returns: Buyer to pay shipping charges on all returns.
|
|
|
MAZAK CNC VERTICAL FANUC AXIS BOARD A20B-0007-00090
Shipping: Domestic(Mainland U.S.A. Excluding Alaska and Hawaii) Shipments: All domestic shipments under 70 lbs are processed via UPS Ground service. Please contact us for other shipping services. Alaska. Hawaii and International Shipments: We ship worldwide from Illinois. USA AT CUSTOMERS EXPENSE Attention International Bidders: International Bidders must be pre-approved. Please contact us before purchasing. Any international shipments will be charged to the customer. Customer responsible for freight charges on custom shipping cartons if applicable. International Customers are responsible for all Customs fees. Import taxes, VAT, and other fees applied by their respective countries Order Processing: Standard order processing is 1-3 days regardless of shipping method chosen. Rush and off-hours service available for an additional fee. Contact ... morefor information. Hours of Operation: Business hours are Monday through Friday from 10:30AM TO 4:00PM Central Standard Time. All e-mails will be answered within one business day. ALL ITEMS ARE NON RETURNABLE Our Mission We strive to provide you with excellent industrial electronics products. We determinate to provide the most accurate description possible in order to ensure customer satisfaction. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Denford CNC motor control board, Microturn 2000
Removed from a working Micro turn 2000 CNC lathe.
|
|
|
Sieb Meyer Cnc 61 Board 26.44, Sieb Meyer 26.44.0069.3 + 26.44.0041.7
The description of this item has been automatically translated. If you have any questions. Please feel free to contact us. Good day is offered as seen from the photo is a: Sieve Meyer 26.44. Sieve Meyer 26.44. 0069.3 + 26.44. 0041.7 Top! Visit and be taken along. Pickup or delivery or Express shipping also possible worldwide Pickup by customer and own carrier possible Worldwide shipping. Express shipping, please contact us Email: Please use eBay messaging system www.tanotec.de phone + fax: 0049(0) 7072 6004670 We still have many interesting items in our shop Please look simply pure or contact us For more articles and information please visit our shop or contact us
|
|
|
EMCO CNC PC board A6A 115.011 "A" VIDEO BOARD
EMCO CNC PC board A6A 115 011 A Video Board. Purchased o ebay for spare parts. Untested as is condition. Ships to USA only.
|
|
|
FANUC A16B-1211-0860 ROBOTIC/CNC SHARED RAM BOARD
ALL ITEMS START AT $3.99. CHECK OUT OUR OTHER AUCTIONS Inventory Number: 12091494106 Manufacturer: Description: FANUC A16B-1211-0860 ROBOTIC/CNC SHARED RAM BOARD Capacity: Model Number: Serial Number: Additional Information: REPAIRED. QUANTITY 1. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: KS. MA, MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice ... moreto have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice& prepaid with paypal. Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a ful
|
|
|
Fanuc 15TT 15T CNC Control PCB Circuit Board A16B-1212-0030/02B _A16B1212003002B
Our internal inventory number on this product is 2V#K5-10B PLEASE NOTE: This part was removed from a working machine. We have no way of testing it once it is removed. It is being sold in good condition unless otherwise stated. Please contact us with any questions. The item in the pictures may not be the item you will receive, since we have Multiple Quantities of this unit. This is just a rep. of what you will be receiving. To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! You won't want to miss any of our $.01 NO RESERVE auctions! DESCRIPTION: You are bidding on a Fanuc PCB Board Model Number: A16B-1212-0030/02B*NOTE* Free Shipping& Handling to lower 48 states via our choice of ground carrier. All Expedited ... moreDomestic Shipments pay $4.00 Boxing/ Handling/ Processing Plus shipping costs from zip 49534! All International Shipments pay $9.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPANY TO GET YOU A BETTER PRICE! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 a.m. delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. International Shipping Policies: We ship FedEx International. UPS International, USPS Express International. Only when requested, we ship USPS Priority; this carrier type lacks reliable tracking info. We cannot be held responsible for your shipment once it leaves US land) Please understand if we ship an item on your account. We are unable to see what you are being charged for shipping. This is both FedEx and UPS rules. They do not allow us to look at your rates that y
|
|
|
Lab-Volt CNC control board MY-93180
This is the primary logic or breakout board from a Lab-Volt 5400 milling machine. I believe the Lab-Volt 5300 lathe uses the same board. This machine worked fine under manual control from the front panel. Though I did not have the software to test the PC CAM control. It was removed to install a different breakout board. It is untested presumed good. But must be sold as-is. There are no visible defects. If the buyer also needs the cables. I will include whatever I have at no extra charge. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-147fd2baaa5-0x109-
|
|
|
Fanuc A20B-0008-041 Mother Board A350-0008-T414/03 from Nakamura TMC-2 CNC Lathe
from Nakamura TMC-2 CNC Lathe Used Fanuc A20B-0008-041 Mother Board A350-0008-T414/03. Very good condition, has been pulled from the working environment. We're unable to test this board completely but we offer you 30 days for hassle-free return. Thank you! Based on our experience and knowledge. We concern this item as working one, but we'll refund your purchase in a case of return. For this item we offer 30 day money back warranty. Returns accepted. Return shipping will be paid by buyer. Buyer may return the product listed at this page within 30 calendar days of the checkout date. Attention! We accept only. If you want to return your purchase. We'll be glad to refund you according to the. We do not accept late returns. Please contact us before opening a case. We're able to solve any problem with return or DOA-related issues ... moreand you will be satisfied. Thank you for viewing. And! Join our store at Facebook®! Why not? On our we publish our listings. Latest updates, deals and other related information. It makes sense. Sometimes it even makes a sense of humour. Our valued customers must accept our store policies. Terms and conditions before checkout. Please read the information below for your convenience. We are determined to provide the most accurate product descriptions possible in order to ensure customer satisfaction. Our sole obligation for all items we sell is the option to return the fees paid. And in no event shall we be liable for any damages, including, but not limited to, any special, direct, indirect, incidental, exemplary, or consequential damages, expenses, business interruption, lost profits, savings, business information, or any other damages arising out of any repair services or remanufactured goods. Due the nature of our business. We don't have history or type of use of all our items. Sometimes we know it. Sometimes not. Most of our items are pulled(used) from working environment. Unless stated otherwise(the“New” and“New Other” item conditions) We do not include operating sys
|
|
|
JANCD-HSP01 Yaskawa CNC Lathe Board DF6203438, Rev. C / JANCD-HSPO1
Used JANCD-HSP01 Yaskawa CNC Lathe Board DF6203438. Rev. C. Thank you for your attention! Based on our experience and knowledge. We concern this item as working one, but we'll refund your purchase in a case of return. For this item we offer 30 day money back warranty. Returns accepted. Return shipping will be paid by buyer. Buyer may return the product listed at this page within 30 calendar days of the checkout date. Attention! We accept only. If you want to return your purchase. We'll be glad to refund you according to the. We do not accept late returns. Please contact us before opening a case. We're able to solve any problem with return or DOA-related issues and you will be satisfied. Thank you for viewing. And! Join our store at Facebook®! Why not? On our we publish our listings. Latest updates, deals and other related ... moreinformation. It makes sense. Sometimes it even makes a sense of humour. Our valued customers must accept our store policies. Terms and conditions before checkout. Please read the information below for your convenience. We are determined to provide the most accurate product descriptions possible in order to ensure customer satisfaction. Our sole obligation for all items we sell is the option to return the fees paid. And in no event shall we be liable for any damages, including, but not limited to, any special, direct, indirect, incidental, exemplary, or consequential damages, expenses, business interruption, lost profits, savings, business information, or any other damages arising out of any repair services or remanufactured goods. Due the nature of our business. We don't have history or type of use of all our items. Sometimes we know it. Sometimes not. Most of our items are pulled(used) from working environment. Unless stated otherwise(the“New” and“New Other” item conditions) We do not include operating systems. Drivers, CD or software unless specified in the description. We are not responsible for any compatibility issues with your working environment. Equipment or software
|
|
|
CNC AUTOMATION INC 4 AXIS I/O IO INTERFACE BOARD 3800 A7113-30150-114
FOR SALE IS A CNC AUTOMATION INC 4 AXIS I/O IO INTERFACE BOARD 3800 A7113-30150-114 IN GOOD WORKING CONDITION. THIS UNIT IS GUARANTEED TO WORK AND BACKED UP WITH A 30 DAY WARRANTY! FLAT SHIPPING IN THE US* EXPEDITED SHIPPING AVAILABLE* CAN SHIP WORLD WIDE/ INTERNATIONAL* PAYMENT REQUIRED WITHIN 48 HOURS* ACCEPT PAYPAL* BUY WITH CONFIDENCE*
|
|
|
Baldor Cnc Board You UM3015HS-150
This is a working ballor servo board it was taken out of a tree CNC milling machine the part number is FUH7123C– 00. I guarantee it will arrive in working condition Any questions call me Tim Brady 941-504-1412
|
|
|
Upgrade 2 Axis CNC Board Interface Adapter For Stepper Motor Driver With Dial
Up For Sale is a Upgrade 2 Axis CNC Board Interface Adapter For Stepper Motor Driver With Dial Toggle Please see all of the pictures. You are buying exactly what you see in them. Thank you for visiting our store! You Will find unique collectibles. Vintage or antique favorites, to complete your collection of art, china, glass, toys and or any potpourri of memories garnished with treasures, found in time. http:stores.ebay.com/FoundInTime Check out my! PayPal Accepted Only Shipping We ship to the buyer's credit card billing address registered at PayPal only. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally ... morecollected by the delivering freight(shipping) company or when you pick the item up. Do not confuse these charges for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Terms of Sale If you are not satisfied with your purchase for any reason. Please contact us within 14 days after receiving your purchase. All items must be returned in the same condition that they were in when we shipped them to you. All tags must be still attached. We package all items very carefully and Delivery Confirmation is included in the shipping rate for domestic mailings. We ship everyday Monday through Friday(except holidays) All items are usually shipped out on the next business day after receiving cleared payment. If there is a problem. Please let us know immediately, and we will fix it. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1484f4db1ee-0x114-
|
|
|
Mitsubishi Meldas Board L3 lathe cnc panel Mori Seiki QY231 rev D
The board is out of a running machine. Here is a link to video of machine running: tinypic.com/r/ftzvyq/8 Normal 0 false false false EN-US X-NONE X-NONE Shipping to 48 cont states only!
|
|
|
3 Axis Stepper Motor Parallel Serial Driver Board, CNC Controller USB Connection
Up For Sale is a 3 Axis Stepper Motor Parallel Serial Driver Board. CNC Controller USB Connection Please see all of the pictures. You are buying exactly what you see in them. Thank you for visiting our store! You Will find unique collectibles. Vintage or antique favorites, to complete your collection of art, china, glass, toys and or any potpourri of memories garnished with treasures, found in time. http:stores.ebay.com/FoundInTime Check out my! PayPal Accepted Only Shipping We ship to the buyer's credit card billing address registered at PayPal only. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally ... morecollected by the delivering freight(shipping) company or when you pick the item up. Do not confuse these charges for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Terms of Sale If you are not satisfied with your purchase for any reason. Please contact us within 14 days after receiving your purchase. All items must be returned in the same condition that they were in when we shipped them to you. All tags must be still attached. We package all items very carefully and Delivery Confirmation is included in the shipping rate for domestic mailings. We ship everyday Monday through Friday(except holidays) All items are usually shipped out on the next business day after receiving cleared payment. If there is a problem. Please let us know immediately, and we will fix it.
|
|
|
MAZAK FANUC 6 CNC BOARD A20B-0008-0440 03A
Fanuc A20B-0008-0440. PC BOARD MODEL B. Shipping: Domestic(Mainland U.S.A. Excluding Alaska and Hawaii) Shipments: All domestic shipments under 70 lbs are processed via UPS Ground service. Please contact us for other shipping services. Alaska. Hawaii and International Shipments: We ship worldwide from Illinois. USA AT CUSTOMERS EXPENSE Attention International Bidders: International Bidders must be pre-approved. Please contact us before purchasing. Any international shipments will be charged to the customer. Customer responsible for freight charges on custom shipping cartons if applicable. International Customers are responsible for all Customs fees. Import taxes, VAT, and other fees applied by their respective countries Order Processing: Standard order processing is 1-3 days regardless of shipping method chosen. Rush and off-hours service ... moreavailable for an additional fee. Contact for information. Hours of Operation: Business hours are Monday through Friday from 10:30AM TO 4:00PM Central Standard Time. All e-mails will be answered within one business day. ALL ITEMS ARE NON RETURNABLE Our Mission We strive to provide you with excellent industrial electronics products. We determinate to provide the most accurate description possible in order to ensure customer satisfaction. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Fadal 1110-3 Board from 88HS VMC15XT CNC Mill #3
13606 Blackbird Rd SW Cumberland MD 21502 Phone: 301-842-7095' Hours 9:00am to 5pm E.S.T. Mon- Fri Categories. Store Newsletter! Add my Shop to your Favourites and receive my email newsletters about new items and special promotions! General Interest. Product Information. Fadal 1110-3 Board from 88HS VMC15XT CNC Mill#3, Product Description. Offered here is a 1110-3 Circuit Board from a Fadal VMC15XT with a 88HS Control. This item comes with a 14 day not DOA Guarentee. If it doesn't work just send it back within 14 days and I'll refund your money minus the shipping cost. We are parting out the complete control system on this machine, so if there is any other electrical item you need. Just let us know. Delivery, Returns, Payment, FAQ, We Ship most items on the same or next day after the order is placed(Monday through Friday) Orders ... moreare processed and shipped in the order they are received. We Ship via USPS. Fed Ex, Freight, or you may pick up you items locally. We have a standard 14 day return policy. Returns are issued on a case by case basis and are at our discretion. New items must be returned in New. Unused Condition, and in Original Packing in Resellable Condition. Printed material(Such as Books and Manuals) must be in original sealed envelope(they will not be accepted if opened) Used Items will be delt with on a one by one basis. Buyers must contact us for return authorization before returning items. Returns are subject to a 20% restocking fee. Please use Ebay Checkout after purchase if paying through PayPal. Beam Equipment& Supplies also accepts Visa. MasterCard, Discover, and American Express over the Phone Beam Equipment& Supplies has been selling on Ebay for@ 15 years. In that time we have always strived to maintain high business standards. Our focus is on Customer service and Customer satisfaction. We sell new and used Engine Rebuilding Equipment and Supplies. Feel free to contact us with any questions. Concerns, or needs you may have. We will do our best to help you in any way we can.
|
|
|
Bridgeport Boss 8 9 CNC EAF circuit board r2e3 r2e4 Part # 1934724
This is an EAF circuit board removed from a working Bridgeport Boss 9 r2e4 machine. The reason for board removal is machine retrofit. Will fit at least Boss 8 and 9 machines(r2e3 and r2e4)
|
|
|
Bridgeport Boss FPU board Part # 1937430 Rev C for r2e3 and r2e4 cnc machines
This is a FPU circuit board removed from a working Bridgeport Boss 9 r2e4 machine. The reason for board removal is machine retrofit. Will fit at least Boss 8 and 9 machines. Part# 1937430 Rev. C
|
|
|
Bridgeport Boss 8 9 r2e3 r2e4 CNC BCI Board
This is a PCI board removed from a working Bridgeport Boss 9 machine. The reason for removal was machine retrofit. Should fit at least Boss 8 and 9(r2e3 and r2e4) Possibly other models as well. But that's just a guess.
|
|
|
EMCO Y1A940010 BOARD FOR EMCOTURN 425 CNC LATHE
EMCO Y1A940010 BOARD FOR EMCOTURN 425 CNC LATHE Condition: EXCELLENT Tested& guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14899fb0847-0x10d-
|
|
|
Acroloc m12 A16B-0160-0543Position control board Fanuc 3000c CNC Mill
Removed from running machine. Should function fine but no guarantees. Shipping will be my actual cost. Please get price from me after winning auction.
|
|
|
WARRANTY Baldor Lab-Volt SYSTEMS CNC 5600-BO MILL MACHINE CONTROL BOARD MY93180
FOR SALE IS A Baldor Lab-Volt SYSTEMS CNC 5600-BO MILL MACHINE CONTROL BOARD MY93180 REV B I N GOOD WORKING CONDITION. THIS UNIT IS GUARANTEED TO WORK AND BACKED UP WITH A 30 DAY WARRANTY! FLAT SHIPPING IN THE US* EXPEDITED SHIPPING AVAILABLE* CAN SHIP WORLD WIDE/ INTERNATIONAL* PAYMENT REQUIRED WITHIN 48 HOURS* ACCEPT PAYPAL* BUY WITH CONFIDENCE*
|
|
|
YASKAWA JANCD-MM01C-01 JANCDMM01C01 YASNAC CNC MEMORY BOARD DF8100494
YASKAWA JANCD-MM01C-01 W/ YASNAC CNC MEMORY BOARD DF8100494. Condition: EXCELLENT Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EMCO R5B120000 20F V R5B12000020FV BOARD FOR EMCOTURN 425 CNC LATHE
EMCO R5B120000 20F V BOARD FOR EMCOTURN 425 CNC LATHE Condition: EXCELLENT Tested& guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EMCO R5A129000 37F V R5A12900037FV BOARD FOR EMCOTURN 425 CNC LATHE
EMCO R5A129000 37F V BOARD FOR EMCOTURN 425 CNC LATHE Condition: EXCELLENT Tested& guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EMCOY1X CONTROL PANEL & BOARD FOR EMCOTURN 425 CNC LATHE
EMCO Y1X CONTROL PANEL& BOARD FOR EMCOTURN 425 CNC LATHE Condition: EXCELLENT Tested& guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
YASKAWA YASNAC CNC BOARD RIU-80E/GX24 RIU80EGX24
YASKAWA YASNAC CNC BOARD RIU-80E/GX24 Condition: EXCELLENT Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Control Techniques CNC Control Board Servo A, B, C, D (encoder output)
For Sale is a USED in Working Condition Control Techniques CNC Control Board Servo A. B, C, D(encoder output) Exact Stock# PIU-CT-B-0001 LOCATION E-3
|
|
|
OKUMA LR-10 CNC LATHE OPUS 5000II SPC1 E4809-045-110-C 1911-1534-07-1.16 BOARD
ARPI MACHINE SALES. OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 OFFICE: 818 890-7625 818 890-7625 VERY IMPORTANT! PLEASE READ. AFTER PURCHASING THIS OR ANY OTHER ITEM FROM US. PLEASE LEAVE POSITIVE FEEDBACK AND GIVE US A 5 STAR RATING IN ALL 4 CATEGORIES. IF YOU HAVE ANY PROBLEMS WITH YOUR ORDER, PLEASE CALL US AT THE OFFICE IMMEDIATELY(BEFORE LEAVING FEEDBACK) AND WE WILL TRY TO RESOLVE ANY ISSUES YOU HAVE. FURTHERMORE, WE MARK ALL OF OUR ITEMS TO PREVENT ANY DISHONEST EBAYER FROM TRYING TO EXCHANGE OUR ITEM WITH THEIR OLD/NON WORKING ONE AND THEN ATTEMPT TO SEND BACK TO US BY CLAIMING IT AS NON WORKING IN ORDER TO RECEIVE A REFUND. THIS HAS HAPPENED SOMETIMES AND WE HAVE TAKEN SERIOUS ACTION AGAINST THESE FRAUDULENT PRACTICES IN THE PAST. THIS TYPE OF BEHAVIOR IS UNACCEPTABLE AND ACTION WILL BE TAKEN AGAINST ... moreTHESE BUYERS THRU EBAY POLICIES BY REPORTING THEM TO EBAY IMMEDIATELY. HERE AT ARPI MACHINE SALES, WE REALIZE MOST PEOPLE ARE HONEST AND DO NOT PRACTICE TECHNIQUES MENTIONED ABOVE. BY THE SAME TOKEN WE ARE COMMITTED 100% TO PROVIDE SUPERIOR CUSTOMER SERVICE TO ALL WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION WE WILL SEPARATE IF YOU SEE SOMETHING YOU WOULD LIKE TO BUY WE JUST STRIPPED A OKUMA LR-10 CNC LATHE WITH OKUMA OSP 5000L SG CONTROLS TO SEE ALL PARTS FROM THIS MACHINE PLEASE PLEASE CALL IF YOU NEED OTHER PARTS FOR IT. OKUMA LR-10 9TH PALLET 1 ~BK 10/3/14 CALIFORNIA BUYERS TO PAY 9% SALES TAX SHIPPING& HANDLING: INTERNATIONAL AND EXPEDITED SHIPPING AVAILABLE PAYMENT INSTRUCTION: Payment can be made with paypal. Business or personal check or wire transfer. All payments must be received by Arpi Machine Sales within 7 days. Payments must be sent to ARPI MACHINE SALES at 12165 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 298-9685 818 298-9685 or by e-mail. TERMS
|
|
|
K&T KEARNEY AND TRECKER CNC BOARD 1-20647
UNIT FROM STOCK ROOM/ NO LONGER NEEDED EMAIL WITH ANY QUESTIONS SAME DAY SHIPPING AVAILABLE IF PAYMENT RECEIVED BEFORE 2PM CENTRAL TIME
|
|
|
Bridgeport XDI Circuit Board 026974 CNC BOSS Mill Used
Used untested Bridgeport BOSS circuit card salvaged from a mill. Untested sold as is for parts or repair only. No warranty. No obvious damage or missing parts. Board is dusty and dirty from storage and use.
|
|
|
Bridgeport CNC Mill BOSS Controls RCK Circuit Board A026865 Used
A used untested circuit card from a salvaged Bridgeport BOSS mill. No obvious damage or parts removed however IC19 is not in it's socket. From the other pictures of the same board I see for sale here I do not see a chip in that socket on those so this may be normal. Board is dusty and dirty from storage and use. Sold as is no warranty for parts or repair only.
|
|
 |