|
Greenlee 2 1/2" Conduit Knockout Punch & Die Set with Draw Stud & Ball Bearing N
Really nice old Greenlee 2 1/2 inch concuit knockout punch and die set with draw stud(500-4188) and ball bearing nut(500-5375) This knockout punch is in almost new cindition except for one small chip on the cutter die. Look at the close-up pictures to see the chip. The tool has been tested and the small chip has no affect on it cutting a nice clean hole. All grease has been removed and it will be shipped dry. If you have any questions please ask. If payment is not received within three(3) days of the end of the auction the item will be relisted. Thank you and good luck.
|
|
|
Greenlee 3/8" X 2-13/16" Draw stud & 1/2 Conduit Knock Out Punch & Die
Greenlee 3/8" X 2-13/16" Draw stud& 1/2 Conduit Knock Out Punch& Die Item has been tested and works perfectly fine. It is used and does show signs of use. If you have any questions please don't hesitate to ask and I will get back to you as soon as possible. I reserve the right to remove this listing at any time as this is also being listed on a local site for sale. I only ship to the lower 48 states. Items must be paid for within 4 days of auction end.
|
|
|
Greenlee 1-7/32" Slug Buster w/Draw Stud
For your consideration Greenlee 1-7/32" Slug Buster w/Draw Stud Very Good Condition ALL INTERNATIONAL BIDDERS MUST EMAIL ME FIRST BEFORE BIDDING OR BUYING AN ITEM: I have the right to cancel your bid IF I cannot ship to your location. PAYMENTS: Paypal( Verified& Confirmed Address) or Cash On Pick Up Paypal: I prefer that the item purchased is paid within 24 hours. SHIPPING& HANDLING: Insurance is already INCLUDED in the shipping fee. Signature will be required for expensive items. FREE LOCAL PICK UP I will ship the item 1-2 days after receiving CLEARED payment from paypal. And will select the carrier best suited for the item purchased(lowest cost& fastest shipping carrier) Fed EX(ground) Or USPS(priority mail, parcel service) with tracking number will be forwarded to you. I am not a store front/ ebay store. So shipping materials ... morecost a bit more since I purchase only what I need(RETAIL) But rest assured that I will pack and ship all the items that Im selling the way that I would like to receive them. Return Policy: NO RETURNS I have described the items with the best of my knowledge and accurately as possible. QUESTIONS: If you have any questions or in need of more pictures and details. Email me anytime. I will respond within the span of 24 hours. FEEDBACKS: As A Buyer: I always leave A +++++. As A Seller: I will leave a feedback soon as I get a feedback from you. When you receive the item please do leave a A+++++ feedback as every single feedback is very important to me. Email me if you are unsatisfied so we can work things out. PLEASE DO NOT BID/ COMMIT TO BUY IF YOU DO NOT INTEND TO PURCHASE THE SAID ITEM. I am very easy to talk to. But I will give a non paying strike if necessary. I have the right to CANCEL/ END the listing ANYTIME because the item is also posted on local listings. Thank You,
|
|
|
Greenlee 5004186 500 4186 Draw Bolt Stud
Greenlee 5004186 500 4186 Draw Bolt Stud Satisfaction guaranteed or your money back This auction is for ONE: Greenlee 5004186 500 4186 Draw Bolt Stud PLEASE NOTE-What you see in the photos is the exact item/s you are going to get. Do not assume anything else comes with it unless noted. CONDITION: Used. But guaranteed to be in excellent working condition. USA SHIPPING: This item/lot‘s actual weight is less than.5 1 Lbs is the packaged weight for this auction item. For my TOTAL SHIPPING/HANDLING ESTIMATE to your location please see eBay’s“SHIPPING COSTS” near the top of this page. For FOREIGN SHIPPING rates check at: http:ircalc.usps.gov/ Take the weight I list for the packaged shipment. Use my Zip(14411) as the"ship from" And add $5 S&H to your choice of service. No charge for LOCAL PICK-UP. Combining purchases is welcome and ... morewill often save you quite a bit on shipping costs. Click on the link“View seller's other items” at the top of this page. RETURNS: Satisfaction guaranteed or your money back NO“restocking fee” NOT SOLD"AS-IS" I have attempted to honestly represent this item to the best of my knowledge. And photograph it as clearly as possible. But, because I do make mistakes(Yes, I am human! buyer must contact me within one week of receipt, for any reason, and receive full reimbursement of the high bid price, Must be returned within 14 days of purchase.with NO"restocking" fee) NO QUESTIONS ASKED! I will even reimburse shipping costs if I made a gross error or misrepresentation. Microscopic condition problems which do not affect its usability will not be considered gross(unless my description states that is a museum piece! PAYMENT by personal or company check will delay shipment by 10 days. MOST IMPORTANT: Have fun bidding!
|
|
|
Greenlee 3" Conduit Punch Die Set w/Large Draw Stud 500-4180
Greenlee 3" conduit punch and die set. Greenlee#500-4180. I inspected all my punch sets for damage. Cracks and bad threads before listing. You are buying a quality used tool, ready to go to work for you. Please check out the pictures, and know that I do my best to point out any potential issues I see in(this) written description. Issues: Minor surface rust/ two extremely tiny(less than.5mm) chips to cutting edge. Check out my feedback and bid with confidence. Thanks for looking and have a great day! electricdealsforyou- 14 59 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13ed3a31722-0xfc-
|
|
|
Greenlee 3.5" Conduit Punch Die Set Knockout 3 1/2" w/Draw Stud
Greenlee 3.5" Conduit Punch Set. Part#s 500-4653 500-4652 500-4688 Set is in great used condition. I inspected all my punch sets for damage. Cracks and bad threads before listing. You are buying a quality used tool, ready to go to work for you. Please check out the pictures, and know that I do my best to point out any potential issues I see in(this) written description. Issues: Minimal surface rust. Check out my feedback and bid with confidence. Thanks for looking and have a great day! electricdealsforyou- 1 461
|
|
|
LOT OF GREENLEE KNOCK OUTS, DRAW STUD, ETC
UP FOR BID IS A LOT OF ASSORTED GREENLEE TOOLS! SOME NEW! THEY INCLUDE: 1 KR 25 3 3/4 CONDUIT 5004008 1 1 CONDUIT AV125 1 1 1/4 DIA 5004002 NEW IN BOX OLD STOCK 1 1 7/32 30.5MM 503627 NEW IN BOX OLD STOCK
|
|
|
GREENLEE DRIVE DRAW STUD BOLT 500-4188 5004188 & COUPLING NUT 500-6992 5006992
GREENLEE DRIVE DRAW STUD BOLT 500-4188 COUPLING NUT 500-6992 PLEASE NOTICE ITEM MAY HAVE SLIGHT RUST. Condition: NEW. In box NEW. No box NEW. Old inventory X, USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping ... moreDetails: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, easy,
|
|
|
Greenlee 2" Conduit Punch Die Set Knockout 3 1/2 500-4063 500-4062 w/ Draw Stud
Greenlee 2" conduit punch and die set(not 2" actual diameter) Greenlee#500-4063 500-4062. This punch is in excellent shape. I do not believe it has ever punched anything. I inspected all my punch sets for damage, cracks and bad threads before listing. You are buying a quality used tool, ready to go to work for you. Please check out the pictures, and know that I do my best to point out any potential issues I see here in this written description. Issues: Slight surface rust. Check out my feedback and bid with confidence. Thanks for looking and have a great day! electricdealsforyou- 1 60 8 Posted with
|
|
|
3/4" GREENLEE 9" long Draw Stud
3/4" GREENLEE 9" long Draw Stud Satisfaction guaranteed or your money back This auction is for ONE: 3/4" GREENLEE 9" long Draw Stud found with all other Greenlee tools. Not marked. PLEASE NOTE-What you see in the photos is the exact item/s you are going to get. Do not assume anything else comes with it unless noted. CONDITION: Used. But guaranteed to be in excellent working condition. USA SHIPPING: This item/lot‘s actual weight is less than.5 1 Lbs is the packaged weight for this auction item. For my TOTAL SHIPPING/HANDLING ESTIMATE to your location please see eBay’s“SHIPPING COSTS” near the top of this page. For FOREIGN SHIPPING rates check at: http:ircalc.usps.gov/ Take the weight I list for the packaged shipment. Use my Zip(14411) as the"ship from" And add $5 S&H to your choice of service. No charge for ... moreLOCAL PICK-UP. Combining purchases is welcome and will often save you quite a bit on shipping costs. Click on the link“View seller's other items” at the top of this page. RETURNS: Satisfaction guaranteed or your money back NO“restocking fee” NOT SOLD"AS-IS" I have attempted to honestly represent this item to the best of my knowledge. And photograph it as clearly as possible. But, because I do make mistakes(Yes, I am human! buyer must contact me within one week of receipt, for any reason, and receive full reimbursement of the high bid price, Must be returned within 14 days of purchase.with NO"restocking" fee) NO QUESTIONS ASKED! I will even reimburse shipping costs if I made a gross error or misrepresentation. Microscopic condition problems which do not affect its usability will not be considered gross(unless my description states that is a museum piece! PAYMENT by personal or company check will delay shipment by 10 days. MOST IMPORTANT: Have fun bidding!
|
|
|
Set of 6 Greenlee Knockout Punch Set 1/2" 3/4 1 1/4 2" Conduit sizes w/draw stud
Large lot of Greenlee conduit sized punches. A complete set for 1/2"2" includes.5" 3/4" 1" 1 1/4" 1 1/2" and 2" All punches are in used condition and do show signs of wear/use. Nothing excessive, these have lots of life left in them. Ready for your tool trailer or jobsite. Check out my feedback and bid with confidence. Thanks for looking and have a great week! electricdealsforyou- 1555-1560 Posted with
|
|
|
Greenlee 5004041 500 4041 3/4-16x3" Draw Bolt Stud good used oem bin2
Greenlee 5004041 500 4041 3/4-16x3" Draw Bolt Stud good used oem. Free shipping USA only as pictured Normal 0 false false false EN-US X-NONE X-NONE Please contact me before leaving neutral or negative feedback to give me a chance to correct any issues. DSR(Detailed Seller Ratings) are a very important aspect of the feedback system. If you do not feel that you can give me 5 stars for each category. Please contact me to let me know what I can do to improve. I always take care of my customers.
|
|
|
Greenlee Conduit PunchDie Set Knockout Draw Stud 5004188 & Coupling Nut 5006992
VERY NICE CONDITION
|
|
|
Greenlee Knockout Punch Set w/Draw Stud 1 1/4" Conduit 5006974 5004013 #1621
Greenlee Punch. Die and Draw Stud for 1 1/4" Conduit. 43.2MM actual diameter. In good used condition. Inspected for cracks and bad threads, ready to go to work for you. More sizes available, $.60 shipping on additional punches. Check out my other listings in my store and my feedback, and bid with confidence. Thanks for looking and have a great week! electricdealsforyou- 1621 Posted with
|
|
|
Greenlee 1 7/32" 30.5mm, 5005180, 5036281, 5004042 draw stud used minor wear
Greenlee 1 7/32" 30.5mm. 5005180, 5036281, 5004042 draw stud used minor wear. minor surface rust from wiping down with a damp rag.
|
|
|
TWO USED Greenlee Slugbuster Knockout Punch Die Draw Stud SETS for 2" Conduit
This sale item is a lot of TWO VINTAGE USED Greenlee Slugbuster Knockout sets to make panel holes for 2" CONDUIT. My photos show the exact items that you are getting. ~ One combination has a draw stud#5004040(with a 1" hex head) A 5004063 die, and a 5004062 punch. ~ The other combination has the SAME drive stud and die, But the 2" conduit punch is# AV441. All of the USED pieces have signs of wear, and a darkened metal patina. The cutting edges seem to be sharp enough to stay"on the job" for a while. Sold as the lot described and pictured. USPS shipping is Free. In the USA. Sorry, but No International sales, on this item. Ebay now REQUIRES PAYPAL payments for our items. We are not permitted to offer payment methods. Sent through the mail. ~ Please do not ask for exceptions. ~ Thanks for shopping, Doug. Powered by The ... morefree listing tool. List your items fast and easy and manage your active items.
|
|
|
SIX USED Greenlee Slugbuster Knockout Punch Die Draw Stud SETS for 1/2" Conduit
This sale item is a lot of SIX VINTAGE USED Greenlee Slugbuster Knockout sets to make panel holes for 1/2" CONDUIT. My photos show the exact items that you are getting. ~ One combination has a draw stud with a 1" hex head. TWO have draw studs with 7/16" square heads. One has an 8mm draw stud head. The OTHER TWO studs have heavily worn threads. And are NOT serviceable. All of the USED pieces have signs of wear, and a darkened metal patina. The cutting edges seem to be sharp enough to stay"on the job" for a while. OR, the parts and pieces could be used for replacement on your current, newer, 1/2" knockout sets. Sold as the lot described and pictured. USPS shipping is Free. In the USA. Sorry, but No International sales, on this item. Ebay now REQUIRES PAYPAL payments for our items. We are not permitted to offer ... morepayment methods. Sent through the mail. ~ Please do not ask for exceptions. ~ Thanks for shopping, Doug. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Greenlee 2" & 1 1/2" Conduit Knokouts with Draw Stud and Case Ex Cond. Warranty
Description: nbsp  This listing is for a set of two Greenlee knockout punches. For sizes 1 1/2" and 2" conduit(or pipe) This item includes both cups, both dies, one(1) draw stud, and a Greenlee leather carry case. nbsp  Item includes a 14 day. Non-DOA limited warranty. Location: C-1 Shipping& Handling: Shipping on this item is by UPS or USPS. Depending on size& weight. We ship only to a confirmed address, and accept Pay-Pal ONLY for payment. For expedited shipping(such as overnight delivery) please contact us. Thanks for stopping by our listing! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1440a960522-0xfd-
|
|
|
Greenlee Punch and Die Set for 2" Hole #500-4232 + 500-4231 draw stud 500-4041
Very good condition don't know if it was ever used. If you have any questions please ask. If you win more than one auction I will combine shipping just ask for an invoice. So check out my other auctions and check back often. Thank you
|
|
|
Greenlee 3'' and 2 1/2'' Conduit Punches with 5004188 Draw Stud Bolt Bearing
Good condition sold AS-IS
|
|
|
New Greenlee Knockout Punch Die for 1 1/4" Conduit 500-4013 500-6974 W/draw Stud
Greenlee 1 1/4" conduit punch and die set. Punch is new. Old stock. Comes as pictured. Free shipping on additional punches. Check out my feedback and bid with confidence. Thanks for looking and have a great day! electricdealsforyou-
|
|
|
(1) Greenlee Knockout Punch Die Set for 3/4" Conduit W/Bll Brng Draw Stud #3247
ONE(1) Set Greenlee Punch+Die for 3/4" Conduit. In good used condition. Inspected for cracks and bad threads. Ready to go to work for you. Check out my other listings in my store and my feedback, and bid with confidence. Thanks for looking and have a great week!
|
|
|
(1) Greenlee Knockout Punch Die Set for 1" Conduit W/ Draw Stud #3761
ONE(1) Set Greenlee Punch+Die for 1" Conduit. In good used condition. Inspected for cracks and bad threads. Ready to go to work for you. Check out my other listings in my store and my feedback, and bid with confidence. Thanks for looking and have a great week! `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14992056b0a-0x107-
|
|
|
Greenlee Punch 2.750" 5004247 5006962 with Draw Stud, Punch & Die
E05 Greenlee Punch. Die, Draw Stud. 2.750" Part Numbers 5004247 5006962 with. Punch, Die& Draw Stud Thanks fer Lookin' the Electric-Roundup!
|
|