|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$14.39 Shipping Condition: New – Open box Location: Cockeysville, United States GW Instek SFG-2120 25MHz DDS Function Generator with 9-Digit LED, Counter, Sweep, AM/FM Modulation. High Performance: Utilizes DDS (Direct Digital Synthesis) ... moretechnology for stable frequencies and low waveform distortion.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: Used Location: Lamar, United States
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China "New 2.7GHZ Benchtop Frequency Counter. ( 220V and 110V AC Version ) ". Frequency / Period Count Functions. Range : 10Hz to 10MHz direct counter;. Resolution ... more: Direct counter : 1, 10, 100Hz switchable;.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Do You Want to Improve Your Work Performance? Do You Want a More Precise and Efficient Coil Winding Machine? Then You Can’t Miss Our Product! ... moreOur Metal Coil Winding Machine Has a Great Work Performance, and It Can Improve Your Working Performance and Efficiency Profoundly. Key Features Accident Prevention: to Reset the Counting Numbers, You Have to Pull the Reset Handle Twice. It Prevents the Machine from Being Reset Accidentally and You Won’t Lose Track of Your Working Progress. Manual : This Machine Can Be Used Manually . Mechanical Count: the Machine Counts the Lap Numbers Through Mechanical Function, It Is Reliable and Straightforward. the Maximum Lap Count Is 99999. High Quality: the Frame of This Machine Is Made of Cast Iron Material, Making It Sturdy an.
Buy It Now
Free Shipping Condition: New Location: Edmond, United States There are 2 heat sinks that would ensure a better heat dissipation. Then adjust "CC-ADJ" clockwise to the current value you need. Because if the more ... moreenergy is left in battery, the less charging current will be.
Buy It Now
$102.50 Shipping Condition: Used Location: Cupertino, United States C and GPIB features. 106 100MHz - 6GHz. Item includes a CD with the manual and a power cord. All show in picture. Tested: Good.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
$3.20 Shipping Condition: Neu Location: China You can use the host software to edit the arbitrary waveform and save it to the signal generator to output the waveform. It features large-scale integrated ... morecircuits, SMT, high reliability and long service life.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Application This coil winding machine is suitable for motor winding, spring winding, cotton winding, ribbon winding. It can be used at home or for industries. ... moreSpecifications Weight: 2.74kg/6.04lbs Size(lxwxh): 9.7x9x18cm/3.81x3.54x7.62in Max Width: 28cm/11.02in Material: Cast Iron Frame, Steel Gear Max Diameter: 15cm/5.9in Maximum Width: 10cm/3.93in Wrap Wire Diameter: 0.02-2.6mm Count Range: 0-99999 Transmission Ratio: 1:8, 1:1 How to Use 1. You should put the wires on the axis. 2. Check if all the gears are in the right place. 3. Add some oil to the oil hole. 4. Turn the handle. Package Included 1 x Coil Counting And Winding Machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: United States Application This coil winding machine is suitable for motor winding, spring winding, cotton winding, ribbon winding. It can be used at home or for industries. ... moreSpecifications Weight: 2.74kg/6.04lbs Size(lxwxh): 9.7x9x18cm/3.81x3.54x7.62in Max Width: 28cm/11.02in Material: Cast Iron Frame, Steel Gear Max Diameter: 15cm/5.9in Maximum Width: 10cm/3.93in Wrap Wire Diameter: 0.02-2.6mm Count Range: 0-99999 Transmission Ratio: 1:8, 1:1 How to Use 1. You should put the wires on the axis. 2. Check if all the gears are in the right place. 3. Add some oil to the oil hole. 4. Turn the handle. Package Included 1 x Coil Counting And Winding Machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
$24.24 Shipping Condition: New Location: Jonestown, United States Part Number: INSTEKAFG-2225 Manufacturer's Description 25MHz True Dual Channel Arbitrary Function Generator We would love to help. Speak with an agent ... moretoday! 25MHz True Dual Channel Arbitrary Function Generator GW Instek is launching AFG-2225. Its first basic level dual-channel arbitrary function generator, which provides superior features in its class. Both channels are equipped with same characteristics to fit dual-signal applications such as differential or IQ signaling. The outstanding cost-performance value makes the AFG-2225 a practical instrument to accelerate the development process. The major features for both channels include 10Vpp output amplitude; 25MHz frequency bandwidth with 1uHz resolution; built-in waveforms of Sine. Square, Ramp(Triangle) and Noise. As to the 1%~99% adjustable duty cycle of Square waveform can be used as pulse signal sources. For the arbitrary waveform, user can edit the 66 built-in waveforms or create a whole new one. Moreover, AFG-2225 carries features of AM/FM/PM/FSK/SUM Modulation, Sweep, Burst and Frequency Counter, which can be applied to various communication fields. In addition to the intuitive and friendly user interface. The 3.5-inch color LCD displays the comprehensive operation information including the true waveform presented at the output. USB Host and Device interfaces are equipped to link the AFG-2225 with other devices, which provide the flexibility of waveform generation for more practical usages. With link to GW Instek GDS-series Digital Storage Oscilloscopes(DSOs) the waveforms of interest can be captured and reconstructed. User can also use the arbitrary waveform PC software to edit the waveform and then send to AFG-2225 directly, or save the waveform into flash drive and then transfer to AFG-2225. Frequency ranges from 1uHz to 25MHz. And offers multiple standard waveforms AFG-2225 offers signal output by DDS technique. The maximum frequency is 25 MHz and offers full-range 1uHz frequency resolution. The built-in functions include Sine. Square, Ramp/Tria
Buy It Now
$5.34 Shipping Condition: Neu Location: China QLS2805S-5M DDS Signal Generator Function Generator Frequency Counter with Color LCD Communication. - Frequency range: sine wave (QLS2805S) 0HZ~5MHZ; ... moresquare wave 0HZ~2MHZ; triangle wave 0HZ~2MHZ; sawtooth wave 0HZ~2MHZ.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States The Maximum Lap Count Is 99999. This Coil Winding Machine Is Suitable for Motor Winding, Spring Winding, Cotton Winding, Ribbon Winding. Do You Want to ... moreImprove Your Work Performance?. Do You Want a More Precise and Efficient Coil Winding Machine?.
Buy It Now
Free Shipping Condition: New Location: Sanford, United States 4 Float Check Blocks:ISNAN, ISINF, ISFINITE, ISNORMAL. Easily Drag&Drop. SFB1 board is the first step of the project and the only available board in the ... moremarket for now. This repository includes all necessary information and resources to start to use SFB1.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: 金东区, China NOTE: This temporary kWh can be reset to zero. The total battery capacity cannot be reset. Relative humidity: no more than 95%. LCD display with backlight. ... moreMaximum current: 80A. Wiring mode: upper input, lower output.
$88.67 Shipping Condition: Used Location: Columbus, United States Very accurate output frequencies are selectable. Comparison accuracy is equal to 1 part in 10.
Buy It Now
$17.30 Shipping Condition: New Location: China
Buy It Now
$5.34 Shipping Condition: Neu Location: China DDS technology, FPGA design, ultra-low power consumption. - Basic function waveforms including sine wave, triangle wave, square wave, sawtooth wave, and ... morepulse wave with adjustable duty cycle. Automatically recall the data of M0 when it is powered on.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
$20.00 Shipping Condition: New – Open box Location: King George, United States TECHNIPOWER W30 VARIAC ADJUSTABLE AUTOTRANSFORMER. 120VAC. 6AMP. 50-60 Cycles. VARIAC IS BRAND NEW IN BOX SCREWS INCLUDED FOR FACE PLATE(shown in pictures) ... moreMANUAL INCLUDED Questions call 540-775-0495 or email
Buy It Now
Free Shipping Condition: New Location: 金东区, China
Buy It Now
$3.19 Shipping Condition: Neu Location: China JDS2800 Dual-channel DDS Signal Generator Arbitrary Waveform Generator 2.4" TFT. 1 DDS Signal Generator. Waveform vertical resolution: 14 bits. Waveform ... morespecifications Waveform sampling rate: 266 MSa/s.
Buy It Now
Free Shipping Condition: New Location: 金东区, China NOTE: This temporary kWh can be reset to zero. The total battery capacity cannot be reset. Loss of function reset temporary power consumption at rated ... morefrequency: 6 seconds1. Relative humidity: no more than 95%.
Buy It Now
$1.37 Shipping Condition: Neu Location: China This product is a drive module developed for inductive BLDC motor. The drive master chip is SNR8503M, and the special circuit for inductive motor drive ... moreis integrated inside the chip, supporting the Hall electric Angle of 120 degrees or 60 degrees, and the default is 120 degrees.
Buy It Now
Free Shipping Condition: New Location: Sanford, United States Easily Drag&Drop. 4 Float Check Blocks:ISNAN, ISINF, ISFINITE, ISNORMAL. SFB1 board is the first step of the project and the only available board in the ... moremarket for now. This repository includes all necessary information and resources to start to use SFB1.
Buy It Now
$5.40 Shipping Condition: New Location: Carson City, United States Four high-speed serial ports (CMOS-level) that can work in UART, Wiegand. The EM1000 is a programmable Ethernet Module for on-board installation which ... morecan be tested with theEM1000-EV Evaluation Board.
Buy It Now
Free Shipping Condition: New Location: Sanford, United States 4 Float Check Blocks:ISNAN, ISINF, ISFINITE, ISNORMAL. Easily Drag&Drop. SFB1 board is the first step of the project and the only available board in the ... moremarket for now. This repository includes all necessary information and resources to start to use SFB1.
Buy It Now
$8.70 Shipping Condition: New Location: Carson City, United States All standard features of modern DSOs (hold acquisition process, hold-off, zoom, etc.) and many more (saving/loading the waveforms for future use, export ... moreto clipboard, printing the results together with scope settings) are available.
Buy It Now
$28.65 Shipping Condition: New Location: Roma, Italy The meter is full compliance with the national standard GB/T17215.321-2008 and IEC62053 international standard grade 1 level of the related technical ... morerequirements of single-phase KWh meter, can measure active power energy, by 6 digital display total consumption electricity, has the advantages of convenient meter reading, high reliability, small volume, light weight, beautiful appearance, advanced technology, and installing 35mmDIN standard guide rail. It has good anti-electromagnetic interference, low power consumption, high precision, high overload, high stability, anti-theft and long life. 2. Energy meter should be installed in indoor ventilated and dry place, adopt 35mmDIN standard rail type installation, the bottom plate of the electricity meter should be fixed in the wall which is str.
Buy It Now
$5.34 Shipping Condition: Neu Location: China FY8300S-20M 20MHz 3-Channel DDS Function Arbitrary Waveform Signal Generator 4CH TTL Level Output. FY8300S series dual-channel function / arbitrary waveform ... moregenerator is a high-performance and cost-effective signal generator.
Buy It Now
Free Shipping Condition: New Location: 金东区, China NOTE: This temporary kWh can be reset to zero. The total battery capacity cannot be reset. Loss of function reset temporary power consumption at rated ... morefrequency: 6 seconds1. Relative humidity: no more than 95%.
Buy It Now
$5.34 Shipping Condition: Neu Location: China SGP10xxS series use direct digital synthesis (DDS) technology and FPGA design. Maximum effective output is greater than 10Vpp with resolution of 0.01Hz ... more(10mHz). Output amplitude and DC offset can be adjusted continuously.
Buy It Now
$5.40 Shipping Condition: New Location: Carson City, United States Four high-speed serial ports (CMOS-level) that can work in UART, Wiegand. The EM1000 is a programmable Ethernet Module for on-board installation which ... morecan be tested with theEM1000-EV Evaluation Board.
Buy It Now
Free Shipping Condition: New Location: 金东区, China WIDE APPLICATION: suitable for various industrial timing systems, with strong practicability. Material: ABS. Accuracy: ±0.01.
Buy It Now
$5.34 Shipping Condition: Neu Location: China 20MHz 2-Channel FY6900-20M Function Arbitrary Waveform Generator Pulse Signal Frequency Counter FY6900-20M. FY6900 series dual-channel function / arbitrary ... morewaveform generator is a high-performance and cost-effective signal generator.
Buy It Now
$2.99 Shipping Condition: New Location: China Enter 36V 20A = 720W, input 48V 20A = 960W, input 60V 20A = 1200W. Input Current: 20A. Short circuit protection: Yes (input 20A fuse) double short circuit ... moreprotection, the use of more security. Module Properties: non-isolated step-up module (BOOST).
Buy It Now
$5.34 Shipping Condition: Neu Location: China Output frequency(sine wave) up to 15MHz/30MHz/40MHz/50MHz/60MHz(optional), 266MSa/s sampling rate and 14bits vertical resolution. Sine frequency range:0~15MHz. ... moreSquare frequency range:0~15MHz. Triangle frequency range:0~15MHz.
Buy It Now
$2.54 Shipping Condition: Neu Location: China Make full use of solar energy, and low-power operation. Reduce power loss! Low power consumption: Yes! Ultra-low pressure designed to achieve low power ... moreconsumption and high efficiency, professional adaptation of solar panels.
Buy It Now
$2.50 Shipping Condition: New Location: China Support 1104 1106 1306 1407 1503 brushless motor. Electric tuning can be used for brushless fans, model airplanes, drones, etc. 2pcs Stepper Motor Driver ... moreExpansion Board DRV8825 A4988 for UNO R3 3D Printer.
Buy It Now
$3.19 Shipping Condition: Neu Location: China JDS2800 Dual-channel DDS Signal Generator Arbitrary Waveform Generator 2.4" TFT. With pulse trains burst output function: allow the unit output 1~1048575 ... morearbitrary pulse trains. 1 DDS Signal Generator.
Buy It Now
Free Shipping Condition: New Location: New York, United States Enter 36V 20A = 720W, input 48V 20A = 960W, input 60V 20A = 1200W. Input Current: 20A. Short circuit protection: Yes (input 20A fuse) double short circuit ... moreprotection, the use of more security. Module Properties: non-isolated step-up module (BOOST).
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Do You Want to Improve Your Work Performance? Do You Want a More Precise and Efficient Coil Winding Machine? Then You Can’t Miss Our Product! ... moreOur Metal Coil Winding Machine Has a Great Work Performance, and It Can Improve Your Working Performance and Efficiency Profoundly. Key Features Accident Prevention: to Reset the Counting Numbers, You Have to Pull the Reset Handle Twice. It Prevents the Machine from Being Reset Accidentally and You Won’t Lose Track of Your Working Progress. Manual : This Machine Can Be Used Manually . Mechanical Count: the Machine Counts the Lap Numbers Through Mechanical Function, It Is Reliable and Straightforward. the Maximum Lap Count Is 99999. High Quality: the Frame of This Machine Is Made of Cast Iron Material, Making It Sturdy an.
Buy It Now
Free Shipping Condition: New Location: 金东区, China NOTE: This temporary kWh can be reset to zero. The total battery capacity cannot be reset. Relative humidity: no more than 95%. Press and hold button ... morefor 6 seconds to reset temporary kWh. Maximum current: 80A.
|
|
|
|
FC-7150U Universal Frequency Counter 0.1-1.5GHz, Operation Manual, Disk
Normal 0 false false false EN-US X-NONE X-NONE Purchased new a few years ago for a contract effort that was terminated before it began. Never used it at all except to check its functionality. Operation manual. Disk, and printout are included. Frequency measuring range: 0.1Hz to 150MHz in A, B input and 50MHz ~ 1.5GHz in C input. Normal 0 false false false EN-US X-NONE X-NONE SPECS: Trigger level adjustment for input A- Separate and common mode selectable for input A and B- Period/ Total measurement for input A- Time interval and ratio measurement for input A and B- Slope mode selectable for input A and B- 9 digit display with 0.01mHz resolution in 1 sec. High sensitivity external reference input function(higher than 20mVrms) Microprocessor controlled- Reciprocal technique for high resolution at low counting frequency- Self check function ... moreexecuted to perform an automatic self diagnosis of various counter function- Push-scanning for selecting function and gate time- Low-pass filter(100kHz. 3dB) installed for removing noise signal in low frequency measuring- AC/DC coupling function(selectable X1/ X10 attenuator) Data hold function- Optional RS-232C serial interface function for communication with computer
|
|
|
Fluke 1910A 1911A ORIGINAL Operation and Service Manual for Frequency Counter
Fluke 1910 and 1911 Operation and Service Manual for Frequency Counter Printed copy with schematics. This is a factory printed manual. Buyer to pay shipping. Checks must clear before shipping. Payment is expected within 7 days. Or the second highest bidder may be given the chance to purchase. for full information on shipping terms. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Takeda Riken 5108 550 MHz Frequency Counter Operation Manual w/schematics 44614
TAKEDA RIKEN 5108 550 MHz Frequency Counter Operation Manual w/schematics Manuals in good used condition. 14 day right of return. General description: TAKEDA RIKEN 5108 550 MHz Frequency Counter Operation Manual w/schematics; product# 44614 We have in stock over 70.000 manuals for test equipment. If you don't find what you need, please give us a call. For questions or additional information. Please contact our Customer Service department at: 1-800-527-4642. Items may be listed on multiple sites. Availability is subject to prior sale. Warranty: 30days Return Right: 14day Payment Options We accept: PayPal(preferred) Major Credit Cards(additional Information may be required) Wire Transfer Texas residents Only: Sales tax will be charged(Please contact Tucker Electronics at 1-800-527-4642 before making payment) Shipping Information We ship ... morevia Fed Ex or USPS. Approx Weight: 1 lbs. Boxed Dim: 15x12 in. Envelope. INTERNATIONAL BUYERS: USPS INTERNATIONAL FIRST CLASS MAIL CAN TAKE FROM 4 TO 5 WEEKS FOR DELIVERY. LIMITED TRACKING AVAILABLE AFTER IT LEAVES TEXAS UNTIL IT ARRIVES AT DESTINATION. DO NOT ORDER BY THIS METHOD IF YOU EXPECT DELIVERY IN 5-10 DAYS. YOU NEED TO ORDER BY USPS PRIORITY MAIL WHICH IS CONSIDERABLY MORE EXPENSIVE. BUT QUICKER. E-MAIL US IF YOU HAVE A QUESTION OR NEED A QUOTE ON PRIORITY MAIL. Auction Sales Policy We will contact the winning bidder via e-mail with 2 business days after the auction has ended. Winning bidders must confirm their order within 3 business days after notification. Additional instructions for completion of sale will be included in the e-mail notification. Payment must be received within 7 business days after the order is confirmed. Or the winning bid will automatically be voided. Exceptions to this rule will be made on an individual basis. Please contact us within 3 business days if you need special arrangements. Tucker Electronics phone: 1-800-527-4642) Any and all state and local sales. Use, excise, privilege, and similar taxes imposed on TUCKER or which TUCKER has
|
|
|
Takeda Riken 60 Digital Frequency Counter Operation Manual 44623
TAKEDA RIKEN 60 Digital Frequency Counter Operation Manual Manuals in good used condition. 14 day right of return. General description: TAKEDA RIKEN 60 Digital Frequency Counter Operation Manual; product# 44623 We have in stock over 70.000 manuals for test equipment. If you don't find what you need, please give us a call. For questions or additional information. Please contact our Customer Service department at: 1-800-527-4642. Items may be listed on multiple sites. Availability is subject to prior sale. Warranty: 30days Return Right: 14day Payment Options We accept: PayPal(preferred) Major Credit Cards(additional Information may be required) Wire Transfer Texas residents Only: Sales tax will be charged(Please contact Tucker Electronics at 1-800-527-4642 before making payment) Shipping Information We ship via Fed Ex or USPS. Approx Weight: ... more1 lbs. Boxed Dim: 15x12 in. Envelope. INTERNATIONAL BUYERS: USPS INTERNATIONAL FIRST CLASS MAIL CAN TAKE FROM 4 TO 5 WEEKS FOR DELIVERY. LIMITED TRACKING AVAILABLE AFTER IT LEAVES TEXAS UNTIL IT ARRIVES AT DESTINATION. DO NOT ORDER BY THIS METHOD IF YOU EXPECT DELIVERY IN 5-10 DAYS. YOU NEED TO ORDER BY USPS PRIORITY MAIL WHICH IS CONSIDERABLY MORE EXPENSIVE. BUT QUICKER. E-MAIL US IF YOU HAVE A QUESTION OR NEED A QUOTE ON PRIORITY MAIL. Auction Sales Policy We will contact the winning bidder via e-mail with 2 business days after the auction has ended. Winning bidders must confirm their order within 3 business days after notification. Additional instructions for completion of sale will be included in the e-mail notification. Payment must be received within 7 business days after the order is confirmed. Or the winning bid will automatically be voided. Exceptions to this rule will be made on an individual basis. Please contact us within 3 business days if you need special arrangements. Tucker Electronics phone: 1-800-527-4642) Any and all state and local sales. Use, excise, privilege, and similar taxes imposed on TUCKER or which TUCKER has a duty to collect in connecti
|
|
|
HP 5340A Frequency Counter Operation and Service Manual
You are buying a HP 5340A operations and Service Manual New. It is in excellent condition. 14 day return.
|
|
|
ANRITSU MF2412B/MF2413B/MF2414B Microwave Frequency Counter Operation Manual
ANRITSU MF2412B/MF2413B/MF2414B- Microwave Frequency Counter Operation Manual Manuals in good used condition. 14 day right of return. General description: ANRITSU MF2412B/MF2413B/MF2414B- Microwave Frequency Counter Operation Manual We have in stock over 70.000 manuals for test equipment. If you don't find what you need, please give us a call. For questions or additional information. Please contact our Customer Service department at: 1-800-527-4642. Items may be listed on multiple sites. Availability is subject to prior sale. Warranty: 30days Return Right: 14day Payment Options We accept: PayPal(preferred) Major Credit Cards(additional Information may be required) Wire Transfer Texas residents Only: Sales tax will be charged(Please contact Tucker Electronics at 1-800-527-4642 before making payment) Shipping Information We ship via Fed ... moreEx or USPS. Approx Weight: 1 lbs. Boxed Dim: 15x12 in. Envelope Auction Sales Policy We will contact the winning bidder via e-mail with 2 business days after the auction has ended. Winning bidders must confirm their order within 3 business days after notification. Additional instructions for completion of sale will be included in the e-mail notification. Payment must be received within 7 business days after the order is confirmed. Or the winning bid will automatically be voided. Exceptions to this rule will be made on an individual basis. Please contact us within 3 business days if you need special arrangements. Tucker Electronics phone: 1-800-527-4642) Any and all state and local sales. Use, excise, privilege, and similar taxes imposed on TUCKER or which TUCKER has a duty to collect in connection with the sale, delivery, or use of any item will be added to the bid and will be payable by Buyer. If sales to Buyer are exempt from such taxes, Buyer shall furnish TUCKER a certificate of exemption. Click Here to view our other listings on eBay TE# 716699 Loc: MD09E Powered by
|
|
|
COMPUTER MEASUREMENTS MANUAL 738A: Frequency Counter - Operation schems # 19272
COMPUTER MEASUREMENTS MANUAL 738A: Frequency Counter- Operation w/schematics. Product# 19272 Manuals in good used condition. 14 day right of return. General description: COMPUTER MEASUREMENTS MANUAL 738A: Frequency Counter- Operation w/schematics. Product# 19272 We have in stock over 70.000 manuals for test equipment. If you don't find what you need, please give us a call. For questions or additional information. Please contact our Customer Service department at: 1-800-527-4642. Items may be listed on multiple sites. Availability is subject to prior sale. Warranty: 30days Return Right: 14day Payment Options We accept: PayPal(preferred) Major Credit Cards(additional Information may be required) Texas residents Only: Sales tax will be charged(Please contact Tucker Electronics at 1-800-527-4642 before making payment) Shipping Information ... moreWe ship via Fed Ex or USPS. Approx Weight: 2 lbs. Boxed Dim: 15x12 in. Envelope. INTERNATIONAL BUYERS: USPS INTERNATIONAL FIRST CLASS MAIL CAN TAKE FROM 4 TO 5 WEEKS FOR DELIVERY. LIMITED TRACKING AVAILABLE AFTER IT LEAVES TEXAS UNTIL IT ARRIVES AT DESTINATION. DO NOT ORDER BY THIS METHOD IF YOU EXPECT DELIVERY IN 5-10 DAYS. YOU NEED TO ORDER BY USPS PRIORITY MAIL WHICH IS CONSIDERABLY MORE EXPENSIVE. BUT QUICKER. E-MAIL US IF YOU HAVE A QUESTION OR NEED A QUOTE ON PRIORITY MAIL. Auction Sales Policy We will contact the winning bidder via e-mail with 2 business days after the auction has ended. Winning bidders must confirm their order within 3 business days after notification. Additional instructions for completion of sale will be included in the e-mail notification. Payment must be received within 7 business days after the order is confirmed. Or the winning bid will automatically be voided. Exceptions to this rule will be made on an individual basis. Please contact us within 3 business days if you need special arrangements. Tucker Electronics phone: 1-800-527-4642) Any and all state and local sales. Use, excise, privilege, and similar taxes imposed on TUCKER or which
|
|
|
COMPUTER MEASUREMENTS MANUAL 709C: Frequency Counter - Operation schems # 19370
COMPUTER MEASUREMENTS MANUAL 709C: Frequency-Period Counter- Operation w/schematics. Product# 19370 Manuals in good used condition. 14 day right of return. General description: COMPUTER MEASUREMENTS MANUAL 709C: Frequency-Period Counter- Operation w/schematics. Product# 19370 We have in stock over 70.000 manuals for test equipment. If you don't find what you need, please give us a call. For questions or additional information. Please contact our Customer Service department at: 1-800-527-4642. Items may be listed on multiple sites. Availability is subject to prior sale. Warranty: 30days Return Right: 14day Payment Options We accept: PayPal(preferred) Major Credit Cards(additional Information may be required) Texas residents Only: Sales tax will be charged(Please contact Tucker Electronics at 1-800-527-4642 before making payment) Shipping ... moreInformation We ship via Fed Ex or USPS. Approx Weight: 3 lbs. Boxed Dim: 15x12 in. Envelope. INTERNATIONAL BUYERS: USPS INTERNATIONAL FIRST CLASS MAIL CAN TAKE FROM 4 TO 5 WEEKS FOR DELIVERY. LIMITED TRACKING AVAILABLE AFTER IT LEAVES TEXAS UNTIL IT ARRIVES AT DESTINATION. DO NOT ORDER BY THIS METHOD IF YOU EXPECT DELIVERY IN 5-10 DAYS. YOU NEED TO ORDER BY USPS PRIORITY MAIL WHICH IS CONSIDERABLY MORE EXPENSIVE. BUT QUICKER. E-MAIL US IF YOU HAVE A QUESTION OR NEED A QUOTE ON PRIORITY MAIL. Auction Sales Policy We will contact the winning bidder via e-mail with 2 business days after the auction has ended. Winning bidders must confirm their order within 3 business days after notification. Additional instructions for completion of sale will be included in the e-mail notification. Payment must be received within 7 business days after the order is confirmed. Or the winning bid will automatically be voided. Exceptions to this rule will be made on an individual basis. Please contact us within 3 business days if you need special arrangements. Tucker Electronics phone: 1-800-527-4642) Any and all state and local sales. Use, excise, privilege, and similar taxes imposed on TU
|
|
|
HEATH SM-128A FREQUENCY COUNTER OPERATION AND SERVICE MANUAL, SCHEMATICS
HEATH SM-128A FREQUENCY COUNTER OPERATION AND SERVICE MANUAL. SCHEMATICS. THIS MANUAL IS FOR THE AUTORANGING FREQUENCY COUNTER THAT ALSO HAD THE SAME DESIGN AS A WESTON 1256 COUNTER. IT INCLUDES SCHEMATIC. PCB LAYOUT, PARTS LIST AND SERVICING INFORMATION. THIS WAS NOT A KIT BUT ONE THAT WAS SOLD ASSEMBLED. THIS MANUAL IS IN GOOD CONDITION. SHIPPING IS FREE IN USA. INTERNATIONAL BUYERS ARE WELCOME TO CONTACT US FOR SHIPPING QUOTATIONS. THERE IS A 14 DAY RIGHT OF RETURN ON ALL ITEMS I SELL.
|
|
|
Army Tech manual, TM 9-9504-23 Operation And Maint. Frequency Counter 8026547
PLEASE READ ALL SO YOU UNDERSTAND THE TERMS. Army Tech manual. TM 9-9504-23 Operation And Maint. Frequency Counter 8026547 This is loaded with fold out schematics Pages: 118 Published May 1958 Manuals are from an Estate. Conditions are fair to good. All show signs of age. Edges and pages could be worn or slightly damaged. ALL MANUALS ARE SOLD"AS IS" WITH NO RETURNS. THEY WILL BE SHIPPED VIA USPS MEDIA MAIL. UNLESS PURCHASER NOTIFIES ME OF THEIR PREFERRED SHIPPING METHOD. YOU WILL BE RESPONSIBLE FOR THE DIFFERENCE IN SHIPPING COSTS. I WILL COMBINE SHIPPING. Thank you for your interest and bidding.
|
|
|
FC45 Frequency Counter Operation Application & Maintenance Manual Sencore
FC45 Frequency Counter Operation Application& Maintenance Manual Sencore. Thanks for looking!
|
|
|
Miida Manual DIGIPET-60 Digital Frequency Counter Operation Manual w/schematic
Miida Manual Model DIGIPET-60 Digital Frequency Counter Operation Manual w/schematic. Manual Covers May Vary. 1 Original. 1 Copy Manuals in good used condition. 14 day right of return. General description: Digital Frequency Counter Operation Manual w/schematic. Manual Covers May Vary. 1 Original. 1 Copy. Product#s 65347& 65355 We have in stock over 70.000 manuals for test equipment. If you don't find what you need, please give us a call. For questions or additional information. Please contact our Customer Service department at: 1-800-527-4642. Items may be listed on multiple sites. Availability is subject to prior sale. Warranty: 30days Return Right: 14day Payment Options We accept: PayPal(preferred) Major Credit Cards(additional Information may be required) Texas residents Only: Sales tax will be charged(Please contact Tucker Electronics ... moreat 1-800-527-4642 before making payment) Shipping Information We ship via Fed Ex or USPS. Approx Weight: 1 lbs. Boxed Dim: 15x12 in. Envelope. INTERNATIONAL BUYERS: USPS INTERNATIONAL FIRST CLASS MAIL CAN TAKE FROM 4 TO 5 WEEKS FOR DELIVERY. LIMITED TRACKING AVAILABLE AFTER IT LEAVES TEXAS UNTIL IT ARRIVES AT DESTINATION. DO NOT ORDER BY THIS METHOD IF YOU EXPECT DELIVERY IN 5-10 DAYS. YOU NEED TO ORDER BY USPS PRIORITY MAIL WHICH IS CONSIDERABLY MORE EXPENSIVE. BUT QUICKER. E-MAIL US IF YOU HAVE A QUESTION OR NEED A QUOTE ON PRIORITY MAIL. Auction Sales Policy We will contact the winning bidder via e-mail with 2 business days after the auction has ended. Winning bidders must confirm their order within 3 business days after notification. Additional instructions for completion of sale will be included in the e-mail notification. Payment must be received within 7 business days after the order is confirmed. Or the winning bid will automatically be voided. Exceptions to this rule will be made on an individual basis. Please contact us within 3 business days if you need special arrangements. Tucker Electronics phone: 1-800-527-4642) Any and all state and local sales. Use
|
|
 |