|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$68.43 Shipping Condition: Used Location: Millersburg, United States Pulley assembly fits a 28" conveyor width. 4" pulley dia x 26-7/8" pulley width. 1" shaft dia. Crowned pulley. Lift Tables. Available on select orders ... morewithin USA lower 48 states. Information and Support.
Buy It Now
Condition: Used Location: Millersburg, United States Transnorm Slider Bed Chain Drive. Belt Speed: 275 FPM. Conveyor In Good Used Condition. Tested @480V 3PH. Conveyor was used in a book printing press line. ... moreConveyor Overall Height: 10.5". 90° Right Hand Curve Section.
Buy It Now
$59.67 Shipping Condition: Used Location: Millersburg, United States Pulley assembly fits a 28" conveyor width. 4" pulley dia x 26-7/8" pulley width. 1" shaft dia. Lagged pulley. Lift Tables. Available on select orders ... morewithin USA lower 48 states. Information and Support.
Buy It Now
Condition: Used Location: Millersburg, United States Conveyor In Good Used Condition. Tested @460V 3PH. Roller speed: 80 FPM. Conveyor length: 50" Overall (36" roller bed length). Conveyor bed height: 35" ... moreto 38" (Adjustable on screw leveling feet). Lift Tables.
Buy It Now
Free Shipping Condition: New Location: Lubbock, United States
Buy It Now
$10.00 Shipping Condition: New – Open box Location: Cornell, United States
Buy It Now
Free Shipping Condition: New Location: Pennsauken, United States 5 Ton Heavy Duty Power Puller with 3 Hooks 2 Gears Automotive Hoist Cable Puller. 5 Ton Heavy Duty Power Puller, 3 Hooks 2 Gears. New And Ioproved Larger ... moreHandle For Extra Leverage. Lift Kits & Parts. Water & Oil Pump.
$18.40 Shipping Condition: New – Open box Location: Kansas City, United States Model/Part Number: 30004G10. 9/32" Chain. Double Chain 7400lb. We have done our best to ensure that all parts are included in these sets. This set may ... morehave been opened previously therefore we cannot ensure that all small parts are included.
Buy It Now
Free Shipping Condition: Used Location: Harrodsburg, United States WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. We are a surplus ... morewarehouse and have many great parts for great prices.
Buy It Now
Free Shipping Condition: Used Location: Harrodsburg, United States WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. We are a surplus ... morewarehouse and have many great parts for great prices.
Buy It Now
Free Shipping Condition: Used Location: Harrodsburg, United States WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. We are a surplus ... morewarehouse and have many great parts for great prices.
Buy It Now
Condition: Used Location: Millersburg, United States 13 FPM Belt speed. Used conveyor in good working condition. Tested @460V 3PH. Accumulation and re-flow table. Plastic open grid belt. Lift Tables. 57" ... moreBed length. 1/2Hp 230/460V Gearmotor.
Buy It Now
Free Shipping Condition: New – Open box Location: Georgetown, United States 200874 Old-Stock; UCC UCC750 Drive Pocket Chain; 7-1/2" Width; 34 Links; 1-1/2" Pitch; 51" Length. Item appears Unused and has been in storage for some ... moretime.. Austin Surplus SKU: 200874 Location: 150894-GRG-R19-P10-S05-0001776
Buy It Now
$32.02 Shipping Condition: New – Open box Location: Millersburg, United States Double Sprocket Conveyor Roller. 1.9" Dia Roller Tapers from 2" to 3" Rubber Urethane. 45" Roller Length. Rubber length 41.5". Lift Tables. 50A18 Sprocket ... moresize. Available on select orders within USA lower 48 states.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification Colour: Orange Shell Material: Alloy Steel Chain Material: G80 Manganese Steel Galvanised Chain Lifting Capacity: 1.5T/3300lbs Chain Length: ... more6m/20ft Max lift height: 6m/20ft Running Test Load: 18.4T/40565lbs Effort Required to Lift Max Load: 216N Lifting Chain Diameter: 7.1mm/0.3inch Product Size: 51*19.5*15cm/20.1*7.7*5.9inch Gross Weight: 16.9kg/37.3lbs Product Weight: 16.4kg/36.2lbs Package Included 1* Manual Chain Hoist 1* English Certificate of Quality Application It can be widely used in transport, construction, and other areas for installing machines, lifting goods, and dragging bags and is also an ideal choice in workshops, garages, factories, etc.
Buy It Now
$74.41 Shipping Condition: Used Location: Millersburg, United States Pulley assembly fits a 24" conveyor width. 5" pulley dia x 22-5/8" width. 1-3/16" shaft dia. Flat pulley. Lift Tables. Available on select orders within ... moreUSA lower 48 states. Information and Support.
Buy It Now
Condition: Used Location: Millersburg, United States Transnorm Slider Bed Chain Drive. Belt Speed: 275 FPM. Conveyor In Good Used Condition. Tested @480V 3PH. Conveyor was used in a book printing press line. ... moreConveyor Overall Height: 10.5". 90° Left Hand Curve Section.
Buy It Now
Condition: Used Location: Millersburg, United States Transnorm Slider Bed Chain Drive. Belt Speed: 280 FPM. Conveyor In Good Used Condition. Tested @480V 3PH. Conveyor Overall Height: 10.5". 90° Left Hand ... moreCurve Section. Lift Tables. Chain Drive.
Buy It Now
Free Shipping Condition: Used Location: Harrodsburg, United States WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. We are a surplus ... morewarehouse and have many great parts for great prices.
Buy It Now
Condition: Used Location: Millersburg, United States Transnorm Slider Bed Chain Drive. Belt Speed: 365 FPM. Conveyor In Good Used Condition. Tested @480V 3PH. -Conveyor is missing the chain guard-. Conveyor ... moreOverall Height: 10.5". 90° Right Hand Curve Section.
Buy It Now
$9.99 Shipping Condition: New Location: Prior Lake, United States The Dutton-Lainson® Chain Drive Manual Winch is designed for use with boat lifts. Manual winch utilizes sprockets and roller chain, featuring an enclosed ... moredesign with aluminum housing. Delivers 2750 lb. single-line capacity; 5500 lb. double-line capacity. 24.4:1 gear ratio. Built-in fully automatic friction brake holds load exactly in position when raising and lowering. Mounting holes are identical on both sides. Removable access panel and top cover makes it easy to change brake pads if needed. Unit is protected by a zinc-plated TUFFPLATE® finish. Made in U.S.A.
Buy It Now
Condition: New – Open box Location: Millersburg, United States Lot of 2.5" Steel Conveyor Rollers. Pallet Racking. Qty: (5) 61" Roller tube length. 58-3/4" length to first sprocket. 62-3/4" axle length. Qty (1) 41" ... moreRoller tube length. (rolling surface). Sprocket size: 21-Tooth.
Buy It Now
Free Shipping Condition: New Location: La Grange, United States
Buy It Now
Condition: Used Location: Millersburg, United States Transnorm Slider Bed Chain Drive. Belt Speed: 280 FPM. Conveyor In Good Used Condition. Tested @480V 3PH. Conveyor was used in a book printing press line. ... moreConveyor Overall Height: 10.5". 90° Left Hand Curve Section.
Buy It Now
Free Shipping Condition: New Location: Davenport, United States Engine will fit any forklift that has a 4Y block in it. ONLY for GAS or PROPANE forklift. OHV in line 4 cylinder long block engine assembly with aluminum ... morecylinder head including oil pan, valve cover and double roller style timing chain and gears.
Buy It Now
Free Shipping Condition: New Location: La Grange, United States YOU ARE BIDDING ON/ BUYING A GUARANTEED NEW HYSTER FORKLIFT PUMP DRIVE CHAIN 1343478 THESE UNITS ARE UNUSED SURPLUS FROM A PARTS ROOM OF A MANUFACTURING ... moreCOMPANY THAT CLOSED IT'S DOORS- THEY ARE UNUSED SURPLUS GUARANTEED IN PERFECT NEW WORKING CONDITION WHEN RECEIVED. PLEASE FEEL FREE TO CONTACT US WITH ANY QUESTIONS SHIPPING WE WILL BE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. ITEMS PURCHASED BEFORE 12:00 CST ARE ARE IN MOST CASES SHIPPED THE SAME DAY. INTERNATIONAL SHIPPING MOST ITEMS CAN BE SHIPPED INTERNATIONALLY- SIMPLY CONTACT US FIRST TO CONFIRM THIS. RESELLERS: PLEASE BE AWARE THAT ALL ITEMS LISTED AS NEW WILL COME THAT WAY- PACKAGING MAY AT TIMES CONTAIN COSMETIC DEFICIENCES SUCH AS WRITING OR MISC. TAPE. PLEASE CONTACT US IF YOU NEED TO HAVE THE ITEM IN PERFECT PACKAGING. SATISFACTION GUARANTEE ITEMS LISTED AS NEW OR UNUSED WILL COME THAT WAY. WE WILL GUARANTEE THESE ITEMS TO WORK AS NEW WHEN RECEIVED. IF YOU ARE NOT SATISFIED FOR ANY REASON. PLEASE CONTACT US AND WE WILL BE HAPPY TO EXCHANGE WHEN POSSIBLE OR ALLOW FOR A RETURN FOR A FULL REFUND. ITEMS LISTED AS USED OR FOR SALE AS PARTS WILL BE SOLD"AS IS. UNLESS WE STATE THAT WE WILL GUARANTEE THE ITEM" PLEASE FEEL FREE TO CONTACT US WITH ANY QUESTIONS INCLUDING COMBINED OR RUSH SHIPPING. REF: MT-8
Buy It Now
Free Shipping Condition: New Location: La Grange, United States
Buy It Now
Condition: Used Location: Millersburg, United States 1Hp 230/460V 3PH gear drive with a 20:1 reducer. Bottle Conveyor Drive Section. Chain drive type. Lift Tables. In good used condition. Belt is removed. ... moreDrive is tested ok. Fits 3.25" belt width.
Buy It Now
Condition: Used Location: Millersburg, United States Belt Speed: 190 FPM. Conveyor In Good Used Condition. Tested @480V 3PH. Conveyor Length: 38". Minimum conveyor height: 35" on casters. Lift Tables. Bed ... moreWidth: 19.5". Belt Width: 14.5".
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Included 1* Manual Chain Hoist 1* English Certificate of Quality Application It can be widely used in transport, construction, and other areas ... morefor installing machines, lifting goods, and dragging bags and is also an ideal choice in workshops, garages, factories, etc. Specification Colour: Orange Shell Material: Alloy Steel Chain Material: G80 Manganese Steel Galvanised Chain Lifting Capacity: 0.75T/1650lbs Lifting Height: 3m/10ft Running Test Load: 9.2T/20282lbs Effort Required to Lift Max Load: 148N Lifting Chain Diameter: 6.3mm/0.2inch Product Size: 35*14*15cm/13.8*5.5*5.9inch Gross Weight: 8kg/17.6lbs Product Weight: 7.5kg/16.5lbs.
Buy It Now
Free Shipping Condition: New – Open box Location: Baroda, United States If you are not able to pick up locally, we are able to get competitive freight quotes as well.
Buy It Now
$35.00 Shipping Condition: New – Open box Location: Millersburg, United States Double Sprocket Conveyor Roller. 45" Roller Length. Lift Tables. 40A21 Sprocket size. Available on select orders within USA lower 48 states. Our mission ... moreis to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
Free Shipping Condition: Used Location: Harrodsburg, United States WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. We are a surplus ... morewarehouse and have many great parts for great prices.
Buy It Now
$14.50 Shipping Condition: Used Location: Wolf Creek, United States This is a lot that includes two Heavy Duty welded steel chains, 12 ft. x 3/8 in. and 8.5 ft x 1/2 in. Also, there is a large chain hook link. A few of ... morethe links on the massive 1/2 in. chain have been rewelded, but the welds are good.
Buy It Now
Condition: Used Location: Millersburg, United States Transnorm Slider Bed Chain Drive. Belt Speed: 240 FPM. Conveyor In Good Used Condition. Tested @480V 3PH. Conveyor Overall Height: 10.5". 90° Right Hand ... moreCurve Section. Lift Tables. Chain Drive.
Buy It Now
Condition: Used Location: Millersburg, United States 40 FPM Roller speed. Pallet Conveyor In Good Used Condition. Tested and running. Chain drive unit is set up with air clutches that were used with stop ... moresensors for zoned conveying. All the sensors are removed but the air clutches need to be engaged to run the conveyor.
Buy It Now
Free Shipping Condition: Used Location: Harrodsburg, United States WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. We are a surplus ... morewarehouse and have many great parts for great prices.
Buy It Now
Free Shipping Condition: New Location: Miami, United States This listing is for a Brand New High Quality HAND HELD BAG CLOSER STITCHER MACHINE. Brand Name: NEWLONG Model: NP-7A Voltage: 220 Made in Japan Free shipping ... morein u.s continental only. If outside of continental please send me address for calculated shipping. Shipping using ups ground. Insurance is included. MAKE SURE TO READ THE DESCRIPTION THIS IS A 220V SEWING MACHNE
Buy It Now
Free Shipping Condition: New Location: Miami, United States Wire Rope ø7 x 98 ft / ø7 x 30 m (drum cable capacity). Motor/Engine Type Electric AC. Capacity Range 1. A Total Height 246 mm. Number of Speeds 1. DL ... moreDrum Length 124 mm. W Width 540 mm. Dynamic Brake NO.
Buy It Now
Condition: Used Location: Millersburg, United States Transnorm Slider Bed Chain Drive. Belt Speed: 250 FPM. Conveyor In Good Used Condition. Tested @480V 3PH. -Conveyor is missing the chain guard-. Conveyor ... moreOverall Height: 10.5". 45° Left Hand Curve Section.
Buy It Now
Free Shipping Condition: Used Location: Harrodsburg, United States WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. We are a surplus ... morewarehouse and have many great parts for great prices.
Buy It Now
Condition: New – Open box Location: Millersburg, United States Pneumatic lift 3-strand chain transfer conveyor. Pallet Racking. 2.5" Roller dia. 6" centers. 11/16" hex axle. Lift Tables. 14" Roller height. 30 FPM ... moreroller speed.
Buy It Now
$50.32 Shipping Condition: New Location: Middlebury, United States Rough Top Incline/Decline Textured Top. Inside Radius Is 41". Chain Is #50. Will there be a dock or forklift. Prefer to pick it up yourself?. Need it ... moreurgently?. Call us and we will do what we can to get it to you quickly.
Buy It Now
Condition: Used Location: Millersburg, United States 11 FPM belt speed. 1/2hp 230/460V 3Ph motor. Conveyor in good used condition. Tested and running. Lift Tables. 36" bed height. Not adjustable. 10' length.
Buy It Now
Free Shipping Condition: New Location: United States Campbell 3/8" Cold Shut. Steel, Blu-Krome, Upc Tagged(T4900624) Empire Price: $ 12.00 Connections for Chain and Attachments When Using Cold Shuts ... morewith Chain. Use One Size Larger Than Chain Size With A Hammer. Drive the Open End Through the Cold Shut Eye Peen the Extended End to Prevent Opening Standard Material: Mild Steel Standard Finish: Zinc Plated Order Unit is"Each" Note: Cold Shuts Should Not Be Reused After Closure Has Been Made DO NOT EXCEED THE WORKING LOAD LIMIT Do Not Use for Overhead Lifting or Hoisting Welcome to Empire Tools. Rigging and Safety! Your One Stop Shop for the Job To make your purchase as simple and easy as possible. Please refer to the store policies listed below. Check-Out Now! Click the at the top of this listing to immediately proceed with our checkout and payment process. Payment We accept the following forms of payment. Shipping We ship to all 50 states and worldwide to help you get the job done! Don't hesitate to contact us for the most accurate shipping rate. Returns We accept returns up to 14 days after you receive your order. Your order must be in new condition. And be in the original packaging. When you receive your shipment. Please note with the delivery driver any damage to the packaging. If possible, take pictures and send them to us- and we will assist you in replacing your order. You must notify us within 3 business days of damage from delivery. Customer responsible for return freight. Customer satisfaction is always our goal- contact us with the eBay"Ask a question" link at the bottom of this listing. Customer Service Questions? Call Empire TRS at 716-870-6050. We would be happy to assist you. Empire TRS's parent company is as a Manufacturer of Lifting Products such as SlingMax Slings. Chain Slings, Synthetic Slings, Twin-Path Slings, and Wire Rope Slings. Full in-house Testing and Certifications of Slings& Hoists. Repair and Rentals of Electric, Gas Powered, Hydraulic and Pneumatic Tools and Equipment. Distributor of Contractor, Indu
Buy It Now
Condition: Used Location: Millersburg, United States Transnorm Slider Bed Chain Drive. Belt Speed: 275 FPM. Conveyor In Good Used Condition. Tested @480V 3PH. Conveyor was used in a book printing press line. ... moreConveyor Overall Height: 10.5". 90° Left Hand Curve Section.
Buy It Now
Condition: Used Location: Millersburg, United States Pallet Conveyor In Good Used Condition. Tested and running. This lot consists of 5 sections total. Line shaft powered with a separate drive. Pallet Racking. ... more(the last 2 sections have a guide rail that narrows to 48").
Buy It Now
Condition: Used Location: Sellersburg, United States Roach 40” X 10’ Powered Conveyor 2.5" Roller .5Hp Chain Drive 30 FPM
Buy It Now
$184.42 Shipping Condition: Used Location: Middlebury, United States Weight (lbs, oz): 120. Size: Length: 27 in. Width: 12 in. Height: 12 in. Need it urgently?. Call us and we will do what we can to get it to you quickly. ... moreWe choose the carrier. To get a freight quote we will need to know the following.
Buy It Now
Condition: Used Location: Millersburg, United States 60 FPM Roller speed. Pallet Transfer Conveyor In Good Used Condition. Tested and running. Pallet Racking. Pneumatic air powered pallet lift in center ... moreof section. 2.5" roller dia. 3" centers. Lift Tables.
Buy It Now
Condition: Used Location: Millersburg, United States 1Hp 230/460V 3PH 56C motor 40:1 gear drive. 40 FPM Roller speed. Pallet Conveyor In Good Used Condition. Tested and running. Pallet Racking. (53.5" roller ... moresurface width). 2.5" roller dia. 3" centers.
Buy It Now
Condition: Used Location: Millersburg, United States Conveyor has a 4-blade pneumatic load lifter installed. 27"x 42" lifting area. Pallet Conveyor In Good Used Condition. Tested and running. Pallet Racking. ... more(49.5" roller surface width). 2.5" roller dia.
Buy It Now
Condition: Used Location: Millersburg, United States Transnorm Slider Bed Chain Drive. Belt Speed: 140 FPM. Conveyor In Good Used Condition. Tested @480V 3PH. Conveyor Overall Height: 10.5". 90° Right Hand ... moreCurve Section. Lift Tables. Chain Drive.
Condition: New Location: Alvarado, United States This steel yard ramp is designed for unloading trucks, trailers, or rail cars when dock space is not available. These chains can be attached to the ICC ... morebumper of your semi-truck trailer to prevent ramp kick-outs.
Condition: New Location: Statesville, United States This steel yard ramp is designed for unloading trucks, trailers, or rail cars when dock space is not available. These chains can be attached to the ICC ... morebumper of your semi-truck trailer to prevent ramp kick-outs.
Buy It Now
$70.86 Shipping Condition: New – Open box Location: Middlebury, United States Size: Length: 80 in. Width: 6 in. Height: 6 in. Weight (lbs, oz): 27. Unless otherwise specifically agreed to in writing by. Prefer to pick it up yourself?. ... moreFace width 71-1/2" before sprockets. We choose the carrier.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: 600 pound capacity with a 3.1:1 ratio this winch is zinc plated for exceptional corrosion resistance. Gears are constructed of high ... morecarbon SAE 1050 steel to resist corrosion and last longer. Comfort grip handle makes cranking easier. Designed to be used with 36’ x 1/4” rope or a 15’ x 2” strap. Features: Includes comfort grip handle for a positive hold while cranking Zinc-plated finish for superior corrosion resistance Full-length drum bushing and oil impregnated shaft bushings minimize maintenance High carbon steel gears to resist wear and last longer Easy-to-use one-way ratchet Package Include:.
Buy It Now
Free Shipping Condition: New Location: Lubbock, United States Feel free to ask us.
Buy It Now
Free Shipping Condition: New – Open box Location: Delta, United States Gate Valves. Knife Gate Valves. Circuit Breakers. Valve Bodies and Manifolds. Heating and Cooling. Cooling Fans. Gear Reducers. Safety and Security.
Buy It Now
Condition: Used Location: Millersburg, United States Transnorm Slider Bed Chain Drive. Belt Speed: 290 FPM. Conveyor In Good Used Condition. Tested @480V 3PH. Conveyor Overall Height: 30". 90° Left Hand ... moreCurve Section. Lift Tables. Conveying Surface Width: 36" (Belt).
|
|
|
|
FKI Drive Roller Conveyor 18" Wide, chain Accuglide
FKI Drive Roller Conveyor 18 1/2" Wide. Chain rollers 15 3/8" Long conveyor 18 1/2" W convoyor 6' long motor 3 HP
|
|
|
FKI Drive Roller Conveyor 24" Wide, chain
FKI Drive Roller Conveyor 24" Wide. Chain rollers 21" W conveyor 24 1/2" W 6' long motor 3 HP
|
|
|
100' of Heavy duty flat wire mesh and accumulating chain drive conveyor system
100' of Heavy duty flat wire mesh and accumulating. Chain drive conveyor system. All sections are 5' wide, there are 9 sections all together, 4 sections are flat wire mesh conveyor powered by 2, 3 phase 2 hp sew eurodrive electric motors. 1720 rpm. There is over 100' of flat wire mesh also included. The conveyors are on 2 foot high heavy duty stands, and from what i have read will convey around 8500 lbs. The remaining 5 sections are all accumulating conveyor, they are also 5' wide chain drive with 3 phase 2 hp baldor electric motors, and three sections have motors. 1720 rpm. All the chains and air valves to control the accumulating are also included. I also have the accumulating eye sensors, probably have about 40 of these. All accumulating conveyors are on 2 foot high heavy duty stands. These conveyors are extremely heavy ... moreduty and are in excellent condition. I don't know why the original owner got rid of these but they spent some serious money on them. They are seriously like new. If you have any other questions let me know and I will try to answer them. Feel free to come look at these any time, and they are for sale locally. Buyer is responsible for all shipping or pickup. Paypal accepted for Buy it now price only. contact Chris at 618-727-0488
|
|
|
PCB conveyor chain for circuit board and 2 dayton variable speed drive motors
Conveyor and variable speed drives were used to run 24 small circuit boards. There were heaters above the conveyor to re heat the boards. There are two conveyor chains(30 inches from center of driver to idler) Can be shorten to almost any length and mounted to width of board. Four bearing/sprockets. Two with couplings for drive motors.The board in the picture is about 3 1/4 x 5 1/2 inch. Easy to mount and set up for your board size Each of the drive motors have a variable speed controller. Max rpm is 13. You can buy all or just the conveyor or drive motors. Send questions Just the motor drives were over $300.00 each at Grainger
|
|
|
Hytrol Powered Chain Drive Roller Conveyor
Serial No. 511279. Chain driven. Dual motor. 2.5" rollers. Overall width: 49" Overall length: 123" The conveyor was installed as part of an automated storage and retrieval system. The project was scrapped. The conveyor was tested, but has no production hours. More units available of different configurations. Buyer is responsible to arrange and pay freight.
|
|
|
Hytrol Powered Chain Drive Roller Conveyor *SLIGHTLY USED*
Single drive motor. 2 Reset switches. Overall width: 49" 57" including motor and switches) Overall length: 60" The conveyor was to be part of an automated storage and retrieval system which was never used. The project was terminated. The unit had few hours from the testing phase resulting in scratches on some of the rollers. The unit has no production hours. More units available of different configurations. Buyer is responsible to arrange and pay freight.
|
|
|
300' HYTROL CHAIN DRIVE ROLLER POWER CONVEYOR W/ACCUMULATION SECTIONS
300' HYTROL CHAIN DRIVE ROLLER PALLET CONVEYOR For sale is approximately 300' of Hytrol Chain Drive Power Roller Conveyor for Pallets. This system consists of approx 26 section of 10' x 51" between frames HYTROL Power Rollers Chain Drive Conveyor sections. With one drive section per 40' of conveyor. Power requirements are 600v 3 phase, and utilizes a Sprocket and Chain Drive that is slaved to the master drive section. This system features two 40 foot sections of no-pressure roller conveyor. And E-Z Logic controlled accumulations sections table top for removal by lift truck. The current configuration of the line is a gentle"V" with one section constructed on an approximate 20" curve. End Section is Pit Mounted with adjustable legs that are currently set at 31" to bring the skid to floor level) The Front ... moreend of the System sits 18" above floor lever(on adjustable legs. The System is equipped additionally with several Cross-Over Steps. Emergency Kill Switches, and a Master Control Panel with PLC's. Roller diamater is 2-3/4" 50" between frames, and 3/8" distance between rollers. As for a weight cap, Hytrol's website indicates that the Maximum load per linear foot of conveyor is 2000 lbs, and the maximum unit load is 5000 lbs per zone. This system is no longer in use. The building in which it is currently installed had been sold and new owner does not require the system for his business. Removal can be arranged on buyer's behalf. Please inquire to the seller all questions. Including safe shipping to your location.
|
|
|
FKI LOGISTEX V-belt conveyor 180 deg curve chain drive
FKI LOGISTEX v-belt conveyor 180 degree curve. Chain drive. Outside corner to corner 8ft 3 in. Inside corner to corner 65 3/4 in. Rollers 21 1/2 in.
|
|
|
Hytrol Style Powered Roller Conveyor 52" W x 24' L Heavy Duty Chain Drive 96 ft.
INDUSTRIAL-PARTS-R-US Next Day Shipping Available for orders placed before 3:30 P.M. EST. Search: Search Mouse over images to see larger version Heavy Duty Powered Roller Conveyor 3" Roller 52" Wide 24' Long Boston Gear Chain Drive Click to view supersize image This is a USED Lot of(4) Hytrol Style Powered Roller Conveyors 96 Linear Foot Total. Heavy Duty 1/4" Steel Construction. Chain Drive with Boston Gear Power Transmission. During removal a couple of the drive motors where damaged but the gear reducers and conveyors are in great condition. Unfortunately due to the current weather conditions we were unable to get better pictures. Once the weather clears new pictures will be uploaded. We have several other Stainless Steel Conveyors, Powered Roller Conveyors, Gravity Conveyors, and Belt Conveyors in stock. We currently ... morehave several Roach, Dorner, McKenzie, and Custom built conveyors in our store. Be sure to check them out. Brand: Hytrol Style true brand unknown Type: Heavy Duty Powered Roller Conveyor Model: Unknown Drive Motor: Boston Gear Motor Voltage: 208-480 Vac 3 Phase Drive Motor Horse Power: 1/2 Hp With Boston Gear Reducer 25:1 Ratio Motor RPM: 1725 Conveyor Length: 24' Long Conveyor Roller Width: 52" Conveyor Total Width: 60" Roller Diameter: 3" Distance Between Centers: Approx. 5" Why Buy From Us? Important Policies Domestic Shipping Payment& Checkout 30 Day Money Back Guarantee Contact Us Why Buy From Us? We post our items to over 50 countries. Firstly. We promise fast shipping along with professional and secure packaging. But most importantly you can be assured of old fashioned customer service. You can expect our service to be friendly and professional. You can also be assured that the service will continue after you receive you purchase. Our goal is for you to return to our store or recommend us. So we wish for you to only to have a positive experience. We have 100% POSITIVE FEEDBACK and we will not be satisfied if ONE customer is unhappy! Don't mi
|
|
|
Webb/Unibilt Conveyor Chain w/Catepillar style drive for 3" Enclosed Track
Up for sale is a a lot of about 800 lft of reconditioned/used Webb Unibuilt Overhead enclosed conveyor Chain#20005 Measured nom stretch over 10ft =.375-5 This chain is clean and in great shape.Samples available shipping wt = 2.4#lft Sold per foot. But prefer to sell it as one lot. Asking $3.50/lft We also have a large qty of"H" Chain 75# load attachments#20057 Included with the chain. Approx 2x per foot. Samples available We also have for sale the matching nbr. 2035(R-W drive unit C878) Reversible 400# caterpillar Drive#20016, with counter weight. Sold separately. Asking $1250.00 We encourage you to come and inspect. Cash price. + frt or pick up at our dock. Packed on skids. We can help load. Surplus Equipment. We have a collection of Machinery and Equipment(M&E) And Associated Tooling and accessories, surplus to our needs that ... morewe would like to sell. All items are in good condition and under power. We have a small website containing pictures of most of our offering and a spread sheet with basic descriptions and information. It is still a work-in-progress. We would prefer to sell the equipment in bulk. Or by selected packages of grouped equipment. I.E. 2x 15hp Compressors = 2x large air tanks Industrial Sand blaster w/ dust collector 3x hvy Safes 5000 lb platform floor scale Stacking large dbl hopper hvy duty 5/32 steel storage Bins Stacking Pallets 4000# 4x6 Portable large Rolling Steel Dump Hopper Conveyor chain and caterpillar parts 7x 32"29" Floor Fans Hand 5000# Pallet Jacks 2x hvy duty 4x6 Dock Plates Yale 5000# Fork lift 24' Straight International Truck We will entertain bids on individual pieces.
|
|
|
Conveyor Placement Table Aluminum T-Slot Extruded Channel Frame Chain Drive
Custom Designed Conveyor/Placement Table Machine This device was used to transport products in a clean manufacturing process. There are 18 moveable platforms. 7 of which provide a 7" x 6" horizontal surface at any time. The frame is made of extruded 40mm square T-slot aluminum. Standard Bosch or generic knock-off precision machine building material. Browning bearings/pillow blocks. Norton Sprockets, non-metallic drive/attachment chain(40-1/2" pitch) 5/8" axles. It would cost over $1000 in materials alone to duplicate this device. Plus design time and assembly labor. This is a versatile machine and can be adapted to many manufacturing needs. Local Pickup Only near DeKalb. Illinois just north of I-88 Tollway and east of I-39 Interstate. About an hour and a half west of downtown Chicago. 20% PayPal payment within 24 hours ... moreof auction close as deposit with balance of successful bid price payable in Cash at pickup within one week. Please contact me with any questions or to arrange for pickup after auction close. Thanks for your interest in my auctions!
|
|
|
Powered Chain Drive Roller Conveyor 1940mm long 3 Phase Gear Motor
Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false EN-AU X-NONE X-NONE Normal 0 false false false EN-AU X-NONE X-NONE Powered Chain Drive Roller Conveyor 1940mm long 3 Phase Gear Motor I have other similar items in my store. Including a number with construction exactly matching and compatible with this one, please check it out. And do a search of my store for roller conveyor Too heavy to post but we can assist with making freight arrangements. Please send your full address(needs to be a business address) and phone number if requesting a freight quote. Call Tim with any questions 0419 363 992 or email me on This item may be inspected by appointment at our office 76 Orsmond St. Hindmarsh Adelaide. Please check out my store, we have a large inventory of high quality industrial automation, manufacturing and process ... moreequipment and we are constantly adding new stock. If you would like to be notified of new arrivals you have the option of signing up for my store newsletter.
|
|
|
Stainless Steel infeed conveyor 21' long with drive, 3 1/4" wide chain.
21 ft section of Arrowhead Stainless Steel Infeed Conveyor. Last used on Bi Di Table. Unit has 1.3 hp 240V/3/60 variable speed SWE driv e. Electrical on/off throw switch. used three 3.25 inch plastic chains side by side for 10" wide feed with adjustable rails and guides. For freight quotes contact us at(610) 217-9992 or.
|
|
|
Motorized Pallet Conveyor Unloader Chain Drive 37" wide 48" long
This Auction is for 1 Motorized Pallet Conveyor Unloader Chain Drive 37" wide 48" long Stuff Motor electrical box need repaired. Good Working Condition when taken out of service. We have Several other Very nice clean pieces of Lantech and Pallet Conveyor Section motorized and Gravity. Message me of check out our Ebay Store. The Conveyors are located in our Milwaukee Wi. Zip 53207. We can load your truck or set up a freight company for you. Best Offers Usually Responded to within 24 hours. We are a seller and buyer of industrial equipment with over 35 years experience. Purchase our products with confidence. If you are not satisfied returns are gladly accepted. Contact us about all of your industrial equipment needs: All best offers on Ebay will be responded to within 24 hours. Thanks for looking! My Policies: 100% Customer satisfaction! ... moreWe gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and we will try to work it out with you. We usually ship the next business day after payment is received. We also offer Expedited shipping on all products. Look under shipping options near the top of the page. We reserve the right to ship via the fastest and most affordable method for our customers. We will always try to combine shipping. Although we will add a small supplies charge to each shipment to cover costs. Checkout my feedback and buy with confidence! No liability expressed or implied on installation or suitability for a particular use. Visit our Ebay stores for more great items and ProStores website at Pictures are typical of the units described. I DISCLAIM ANY WARRANTY OF SUITABILITY FOR A PARTICULAR PURPOSE AND/OR NON-INFRINGEMENT. IN NO EVENT SHALL I BE LIABLE FOR ANY DAMAGES EXCEPT ACTUAL DAMAGES UP TO. BUT NOT EXCEEDING, THE AMOUNT PAID TO ME FOR THE PRODUCT, INCLUDING: I SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INDIRECT DAMAGES OR LOST PROFITS WHETHER OR NOT ADVISED OF SAME. I am not a distributor of original manufacturers and I am not a party to any manuf
|
|
|
Sew-Eurodrive Simplimatic Aluminum Modular T-Slot Table Top Conveyor Chain Drive
Sew-Eurodrive Simplimatic Aluminum Modular T-Slot Table Top Conveyor Chain Drive 38 Rpm YOU WILL RECEIVE ONE PER ORDER. THIS DRIVE IS USED BUT IN GOOD CONDITION. PLEASE CHECK THE OIL LEVEL PRIOR TO INSTALLATION. THE EXTRUSION IS APPROXIMATELY 3.5" SQUARE. THE SLOT FOR THE CHAIN MEASURES ABOUT 2" BETWEEN THE WEAR-STRIPS. VIEW PICTURES OF THE TAGS FOR OPERATING PARAMETERS. PLEASE EMAIL US IF YOU NEED A DIFFERENT CONFIGURATION. WE ARE SELLING THE TRACK WITHOUT THE WEAR-STRIP AND TRACK CONNECTORS BUT YOU MAY GET SOME ON YOUR ORDER. CONSIDER IT A BONUS. AT THE TIME OF THIS LISTING WE HAVE/HAD APPROXIMATELY 2500 FEET OF SIMPLIMATIC CONVEYOR INCLUDING CHAIN. ALUMINUM TRACK, STANDS, RETURNS, DRIVES, ETC. IF YOU ARE A DEALER, SETTING UP A NEW LINE, WOULD LIKE TO PURCHASE THE ENTIRE INVENTORY, OR A LARGE QUANTITY; PLEASE CALL MIKE TO DISCUSS ... moreAT 717-517-6516. BELOW ARE LINKS TO A FEW OF THE OTHER ITEMS FROM THIS SYSTEM. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 717-517-6516. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: OVERALL DIMENSIONS: WIDTH: 14" LENGTH: 19" HEIGHT: 9" SHIPPING WEIGHT: 125 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T
|
|
|
Bosch Rexroth Inside Motor Mount Roller Chain Conveyor Drive AS2R/M-H B0480 S12
Bosch Rexroth Inside Motor Mount Roller Chain Conveyor Drive AS2R/M-H B0480 S12 THIS ROLLER CHAIN CONVEYOR DRIVE UNIT IS USED BUT IN GOOD CONDITION. IT WAS REMOVED FROM A WORKING SYSTEM. THE MOTOR IS MOUNTED ON THE INSIDE OF THIS UNIT. UNITS MAY OR MAY NOT COME WITH MOTOR CONNECTION HOUSING PLATES OR CHAIN DRIVE HOUSING COVERS. MULTIPLE QUANTITIES MAY NEED TO BE SHIPPED VIA FREIGHT. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# AS2R/M-H B0480 S12 APPROX. SHIPPING DIMENSIONS: WIDTH: 20" LENGTH: 14" HEIGHT: 18.5" WEIGHT: 85 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. ... moreWE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES. AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALE
|
|
|
Bosch Rexroth Roller Chain Conveyor Drive Return Unit UM2/R 480MM
Bosch Rexroth Roller Chain Conveyor Drive Return Unit UM2/R 480MM THIS ROLLER CHAIN CONVEYOR RETURN UNIT IS USED BUT IN GOOD CONDITION. IT WAS REMOVED FROM A WORKING SYSTEM. UNITS MAY OR MAY NOT COME WITH CHAIN DRIVE HOUSING COVERS. MULTIPLE QUANTITIES MAY NEED TO BE SHIPPED VIA FREIGHT. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# UM2/R 480MM APPROX. SHIPPING DIMENSIONS: WIDTH: 21.5" LENGTH: 6.5" HEIGHT: 14" WEIGHT: 32 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. ... moreSHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES. AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LI
|
|
|
Bosch Rexroth Outside Motor Mount Roller Chain Conveyor Drive AS2R/M-H B0480 S12
Bosch Rexroth Outside Motor Mount Roller Chain Conveyor Drive AS2R/M-H B0480 S12 THIS ROLLER CHAIN CONVEYOR DRIVE UNIT IS USED BUT IN GOOD CONDITION. IT WAS REMOVED FROM A WORKING SYSTEM. THE MOTOR IS MOUNTED ON THE OUTSIDE OF THIS UNIT. UNITS MAY OR MAY NOT COME WITH MOTOR CONNECTION HOUSING PLATES OR CHAIN DRIVE HOUSING COVERS. MULTIPLE QUANTITIES MAY NEED TO BE SHIPPED VIA FREIGHT. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# AS2R/M-H B0480 S12 APPROX. SHIPPING DIMENSIONS: WIDTH: 28" LENGTH: 16" HEIGHT: 19" WEIGHT: 90 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. ... moreWE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES. AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALE
|
|
|
Heidelberg Systems 3 HP Drive Unit For A Overhead Chain Conveyor/Monoral System
574-825-4990 SKU: 56153 Heidelberg Systems 3 HP Drive Unit For A Overhead Chain Conveyor/Monoral System. Brand: Heidelberg Web Systems Size: Length: 37 in. Width: 18 in. Height: 29 in. Condition: Used Country of Manufacture: Unknown Consigner: W Items in Lot: 1 Lister: 6 Weight(lbs. Oz) 545.0 Caterpillar Type w/Driving Dogs On Drive Belt. 3HP Reliance RPM III DC Motor, Boston 10:1 700 Series Gear Reducer, w/An American Autogard Pneumatic Torque Limiter For Overload Protection. Size 36-1/2"L x 18"W x 28-1/2"T Overall. Weight. Unit Was Removed From A Working Evironment. CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.net Bullseye Industrial Sales is ... moreyour leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer mus
|
|
 |