In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
55.00
Buy It Now
Free Shipping
Condition: New
Location: Pomona, United States
Clearcast 7000 is a epoxy resin system which was designed for high gloss, clear castings, and coatings. This epoxy will cure clear, shiny, and display ... morea high gloss look. This resin will resist yellowing and avoid blushing.
$
98.95
Buy It Now
Free Shipping
Condition: New
Location: Pomona, United States
If mixing by weight, mix 100 parts of resin into 83 parts of hardener. When mixing this product, make sure to use a round cup & mix thoroughly scraping ... moreall sides and bottom of mixing container. Improperly mixed epoxy can create a major headache.
$
55.00
Buy It Now
Free Shipping
Condition: New
Location: Pomona, United States
For castings, our product can be used on units under 1/2". This resin is perfect for jewelry, coasters, keychains, trays, and molds. Our resin cures clear ... moreand very hard. The manufacture date is on each kit.
$
54.95
Buy It Now
Free Shipping
Condition: New
Location: Lake Elsinore, United States
For castings, our product can be used on units under 1/2". This resin is perfect for jewelry, coasters, keychains, trays, and molds. Our resin cures clear ... moreand very hard. The manufacture date is on each kit.
$
22.99
Buy It Now
Free Shipping
Condition: New
Location: Missouri City, United States
The resin 1:1 mix ratio by volume, can deep pour up to 1.2" one time 16 Oz kit : 8 Oz resin + 8 Oz hardener (Total 16 Oz ) 32 Oz kit : 16 Oz resin + 16 ... moreOz hardener (Total 32 Oz ) 64 Oz kit : 32 Oz resin + 32 Oz hardener (Total 64 Oz ) 1 Gallon kit : 64 Oz resin + 64 Oz hardener (Total 1 Gallon) The resin specially designed with Low viscosity, convenient 1:1 mix ratio by volume, long pot life, room temperature curing system with great clarity and a high gloss finish. Each time the resin mixed, pour No more than 150ml, with a thickness range of 0.4" -1.2" (1-3cm), to avoid bursting.
$
12.99
Buy It Now
Free Shipping
Condition: New
Location: Lillington, United States
Adverse allergic reactions can occur. Always wear nitrile gloves when handling or mixing the resin and hardener and use a respirator if mixing in a poorly ... moreventilated area. 8oz Kit: Epoxy Resin + Hardener Kit (4oz. ).
$
32.99
Buy It Now
Free Shipping
Condition: New
Location: Missouri City, United States
The resin 1:1 mix ratio by volume, can deep pour up to 1.2" one time 16 Oz kit : 8 Oz resin + 8 Oz hardener (Total 16 Oz ) 32 Oz kit : 16 Oz resin + 16 ... moreOz hardener (Total 32 Oz ) 64 Oz kit : 32 Oz resin + 32 Oz hardener (Total 64 Oz ) 1 Gallon kit : 64 Oz resin + 64 Oz hardener (Total 1 Gallon) The resin specially designed with Low viscosity, convenient 1:1 mix ratio by volume, long pot life, room temperature curing system with great clarity and a high gloss finish. Each time the resin mixed, pour No more than 150ml, with a thickness range of 0.4" -1.2" (1-3cm), to avoid bursting.
$
48.88
Buy It Now
Free Shipping
Condition: New
Location: Houston, United States
SEQUEL Industries 1:1 Table/Bar Top Epoxy Resin Super hi build- achieve multiple layers of clear coat all at once Easy 1 to 1 mix ratio Hi-gloss and abrasion ... moreresistant Much higher quality than the epoxy resin box sets found at the big box stores and far less expensive Kit includes 2 Gallons Resin and 2 Gallons Hardener
$
49.50
Buy It Now
Free Shipping
Condition: New
Location: Phoenix, United States
Part Number DR - 1GAL. General use, multi-purpose epoxy resin kit. This product can be used on a variety of applications. Perfect for coating wood, concrete, ... moreplastics, fiberglass, and all things in between!
$
32.99
Buy It Now
Free Shipping
Condition: New
Location: Missouri City, United States
The resin 1:1 mix ratio by volume, can deep pour up to 1.2" one time 16 Oz kit : 8 Oz resin + 8 Oz hardener (Total 16 Oz ) 32 Oz kit : 16 Oz resin + 16 ... moreOz hardener (Total 32 Oz ) 64 Oz kit : 32 Oz resin + 32 Oz hardener (Total 64 Oz ) 1 Gallon kit : 64 Oz resin + 64 Oz hardener (Total 1 Gallon) 2 Gallons kit : 1 Gallon resin + 1 Gallon hardener (Total 2 Gallons) Each time the resin mixed, pour No more than 150ml, with a thickness range of 0.4" -1.2" (1-3cm), to avoid bursting.
$
19.99
Buy It Now
Free Shipping
Condition: New
Location: Houston, United States
The resin 2:1 mix ratio by weight (Not by volume) 24oz kit : 2 bottles 8oz resin + 1 bottle 8oz hardener 48oz kit : 2 bottles 16oz resin + 1 bottle oz ... morehardener 96oz kit : 2 bottles 32oz resin + 1 bottle 32oz hardener 1.5 Gallon kit : 2 bottles 64oz resin + 1 bottle 64oz hardener 3 Gallons kit : 2 bottles 1 Gallon resin + 1 bottle 1Gallon hardener The resin specially designed with Low viscosity, convenient 2:1 mix ratio by weight, long pot life, room temperature curing system with great clarity and a high gloss finish. Formulated to meet a variety of applications.
$
13.40
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
CRYSTAL CLEAR & HIGH GLOSS: Achieve a clear and shiny finish with Teexpert's high-quality epoxy resin. SAFE & NON-TOXIC: Teexpert epoxy resin is safe ... moreto use, our non-toxic formula is odorless, non-flammable, and non-hazardous.
$
19.99
Buy It Now
Free Shipping
Condition: New
Location: Missouri City, United States
The resin 1:1 mix ratio by volume, can deep pour up to 1.2" one time 16 Oz kit : 8 Oz resin + 8 Oz hardener (Total 16 Oz ) 32 Oz kit : 16 Oz resin + 16 ... moreOz hardener (Total 32 Oz ) 64 Oz kit : 32 Oz resin + 32 Oz hardener (Total 64 Oz ) 1 Gallon kit : 64 Oz resin + 64 Oz hardener (Total 1 Gallon) The resin specially designed with Low viscosity, convenient 1:1 mix ratio by volume, long pot life, room temperature curing system with great clarity and a high gloss finish. Each time the resin mixed, pour No more than 150ml, with a thickness range of 0.4" -1.2" (1-3cm), to avoid bursting.
$
55.00
Buy It Now
Free Shipping
Condition: New
Location: Lake Elsinore, United States
This resin is a 1 gallon kit. You will receive 1 half gallon of resin and 1 half gallon of hardener. The resin is a premium quality 100% solid with no ... morecheap additives. This resin can be used for high gloss coatings.
$
55.00
Buy It Now
Free Shipping
Condition: New
Location: Murrieta, United States
The Epoxy Resin Cures Rock Hard and Exhibits Great Air Release. 1/2 Gallon is resin and 1/2 gallon is hardener. If mixing by weight, mix 83 (pbw) of hardener ... moreinto 100 (pbw) of Resin. Everything you need is included each unit is a 1/2 Gallon.
$
51.95
Buy It Now
Free Shipping
Condition: New
Location: Lake Elsinore, United States
You will simply love this super high gloss finish epoxy resin! Special Note: Your kit starts at 1-gallon combined. The typical pot-life on this item is ... moreroughly 45-50 minutes based on mass and temperature.
$
27.99
Buy It Now
Free Shipping
Condition: New
Location: North Little Rock, United States
Create stunning resin crafts with this high-quality Epoxy Resin Kit. In addition, this epoxy resin is compatible with a variety of materials such as wood ... moreand plastic, making it a versatile choice for all your crafting needs.
$
14.41
Buy It Now
Free Shipping
Condition: New
Location: Jersey City, United States
The expoxy resin accessories can help you better start your ideas.Ideal for both skilled and inexperienced users. Vast Array of Uses-Crystal clear epoxy ... moreresin has wide applications in many fields due to its high strength and fast curing feature.
$
14.65
Buy It Now
Free Shipping
Condition: New
Location: Brooklyn, United States
💎No Bubbles & Self Leveling - Low-viscosity epoxy resin formula will self-leveling and smooth out, with stronger defoaming ability, almost no bubbles ... morecompared to other epoxy on the market. 💎Crystal Clear & Anti-yellowing - NASUBI high gloss epoxy resin is clear as glass, no yellowing, anti-scratch and waterproof.
$
20.89
Buy It Now
Free Shipping
Condition: New
Location: Orange, United States
17OZ Clear Resin Epoxy Resin Kit, Not Yellowing&Bubble Free Self-Leveling Coating& Casting Resin for Art Crafts, Jewelry Making,Resin Molds,Art Resin ... more(8.5OZ x 2). The expoxy resin accessories can help you better start your ideas.Ideal for both skilled and inexperienced users.
$
14.97
Buy It Now
$7.00 Shipping
Condition: New
Location: Republic, United States
This Sig Wong epoxy resin coating kit is a must-have for any crafter looking to create stunning resin crafts. With a 19oz capacity, this kit provides ... moreample material to bring your creative ideas to life. The high-quality resin creates a durable and glossy finish that will enhance the beauty of your crafts. Crafters will appreciate the easy-to-use kit that comes with all the necessary supplies to get started on their projects. The Brand's reputation for quality ensures that crafters will be satisfied with their creations. Get your Sig Wong epoxy resin coating kit today and let your creativity shine!
$
15.99
Buy It Now
Free Shipping
Condition: New
Location: San Jose, United States
For best results, carefully follow the instructions and use gloves to protect your hands.
$
26.69
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Pouring: The Mixed Resin Needs To Be Poured Into The Mold Within 45 Minutes. Do Not Scrape The Sides Or Bottom Of The Mixing Container When Pouring. Make ... moreyour artwork vibrant and perfectly textured with a glass-like surface.
$
12.80
Buy It Now
Free Shipping
Condition: New
Location: Houston, United States
The resin 1:1 mix ratio by volume 16 Oz kit : 8 Oz resin + 8 Oz hardener 32 Oz kit : 16 Oz resin + 16 Oz hardener 64Oz kit : 32 Oz resin + 32 Oz hardener ... more1 Gallon kit : 64 Oz resin + 64 Oz hardener 2 Gallons kit : 1 Gallon resin + 1 Gallon hardener The resin specially designed with Low viscosity, convenient 1:1 mix ratio by volume, long pot life, room temperature curing system with great clarity and a high gloss finish. Formulated to meet a variety of applications. Perfect for tabletops, fiberglass work, small castings (under 1.2"), electrical potting, jewelry making, concrete - pebble coating, marine applications- boat building, & wood water proofing - repairs.
$
18.79
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
And you can also mix the white color with other colors to achieve translucence. Feel free to blend them to achieve the color you desire! Free 5 pairs ... moreof disposable gloves will protect your hands clean while doing crafts.
$
24.13
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Stir slowly art resin in one direction until no swirls are seen at all. Scrape the sides and bottom thoroughly.Ensure uniform mixing at all positions. ... moreThe easy to pour epoxy resin formula can self level and smooth.
$
55.00
Buy It Now
Free Shipping
Condition: New
Location: Lake Elsinore, United States
Lonestar epoxy resin 1 gallon kit. Excellent product for all your needs. You can make the best projects with this resin. Cures with a high gloss finish, ... moreheat resistant to 170F., scratch and smudge resistant, water proof, excellent chemical resistant!
$
55.00
Buy It Now
Free Shipping
Condition: New
Location: Murrieta, United States
If mixing by weight, mix 100 parts of resin into 83 parts of hardener. When mixing this product, make sure to use a round cup & mix thoroughly scraping ... moreall sides and bottom of mixing container. Improperly mixed epoxy can create a major headache.
$
13.49
Buy It Now
Free Shipping
Condition: New
Location: Kenilworth, United States
$
9.98
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Mix them and pour the soap into the mold to form a soap mixture. ✅ Natural Mica Mineral. - Mica powder. - Prepare 1 teaspoon of mica powder (color of ... moreyour choice) and 1/2 teaspoon of alcohol in a small bowl and mix well to form a paste.
$
124.99
Buy It Now
Free Shipping
Condition: New
Location: Monterey Park, United States
If mixing by weight, mix 100 parts of resin into 83 parts of hardener. Cold weather slows the curing process down, whereas heat speeds curing up. Always ... moretry to mix chemicals at room temperature. Quick Guide: Pour Part B Hardener first into a mixing cup and Part A Resin second.
$
258.50
Buy It Now
Free Shipping
Condition: New
Location: Training Battalian S.O, India
The river-like resin feature makes each table truly one-of-a-kind, bringing a touch of the outdoors inside.
$
14.47
Buy It Now
Free Shipping
Condition: New
Location: United States
TRANSLUCENT EPOXY RESIN DYE: A little can goes a long way ! And you can also mix the white color to achieve opacity. Just shake it evenly before use. ... moreWe promise we can make you happy if you give us a fair chance.
$
14.00
Buy It Now
Free Shipping
Condition: New
Location: Pakistan
CRYSTAL CLEAR & HIGH GLOSS: Achieve a clear and shiny finish with Teexpert's high-quality epoxy resin.
$
74.99
Buy It Now
Free Shipping
Condition: New
Location: Addison, United States
SC110 preserves the substrate with an ultra-clear, scratch resistant finish while remaining flexible enough to withstand vibration and expansion/contraction. ... moreSC110 is a specially formulated 2-component epoxy with a modified cycloaliphatic amine curative.
$
33.36
Buy It Now
Free Shipping
Condition: New
Location: Homestead, United States
Make your artwork vibrant and perfectly textured with a glass-like surface. Everything you need for your creations.
$
13.99
Buy It Now
Free Shipping
Condition: New
Location: San Mateo, United States
Epoxy Resin, 8.8OZ Resin Kit, Epoxy Resin Crystal Clear✅Not Yellowing and No Bubble Self Leveling Easy Mix 1:1 Casting & Coating for DIY Jewelry Making ... moreof the Art Resin & Epoxy Resin (8.8Oz). Epoxy resin tools and accessories contains: 1 4.4oz resin, 1 4.4oz Hardener, 4 stirring sticks, 2 gloves, 1 instructions.
$
54.95
Buy It Now
Free Shipping
Condition: New
Location: Houston, United States
Here's an overview of its features, specifications, purposes of use, and instructions When combined in the proper ratio and thoroughly mixed, these components ... morecreate a clear, glossy, and durable epoxy resin that is ideal for various creative projects.
$
215.99
Buy It Now
Free Shipping
Condition: New
Location: Addison, United States
SC110 preserves the substrate with an ultra-clear, scratch resistant finish while remaining flexible enough to withstand vibration and expansion/contraction. ... moreSC110 is a specially formulated 2-component epoxy with a modified cycloaliphatic amine curative.
$
55.00
Buy It Now
Free Shipping
Condition: New
Location: Murrieta, United States
You have found it! The best Tumbler epoxy period. This resin will cure fast clear and rock hard. Our formula is specifically designed for Tumbler manufacturers. ... moreThis resin will not yellow even under direct UV light.
$
19.99
Buy It Now
Free Shipping
Condition: New
Location: Miami Beach, United States
These big resealable bags containing 10g/0.35oz of each color will last much longer if you use them wisely. A mica powder base coated with Titanium Dioxide ... moreand/or Iron Oxide creates a pearly special effect by combining light interference with the light absorption of an added colorant.
$
27.70
Buy It Now
Free Shipping
Condition: New
Location: Selden, United States
【Perfect Works】:Glossy surface after the table top epoxy resin is cured, perfect texture, no yellowing and high temperature resistance, wear-resistant ... moreand durable, ideal for projects such as desktop coating.
$
29.99
Buy It Now
Free Shipping
Condition: New
Location: Missouri City, United States
The resin 1:1 mix ratio by volume, can deep pour up to 1.2" one time 64oz kit : 32 Oz resin + 32 Oz hardener (Total 64oz) The resin specially designed ... morewith Low viscosity, convenient 1:1 mix ratio by volume, long pot life, room temperature curing system with great clarity and a high gloss finish. Each time the resin mixed, pour No more than 150ml (75ml A +75ml B) Each time, with a thickness range of 0.4" -1.2" (1-3cm), to avoid bursting. and If multiple additions are required, the operation time should be controlled within 5 minutes in summer and 30 minutes in winter to avoid layering.
$
42.82
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Epoxy project will self leveling and self defoaming, just waiting for dry. We will respond within 24 hours. 【DIAMOND CRYSTAL CLEAR COATING】Our epoxy resin ... moreMTBJZJ goes on smooth, clear like mirror finish.
$
5.55
Buy It Now
Free Shipping
Condition: New
Location: 义乌市, China
The operation is simple, easy to dissolve, and the color is beautiful. Material: Resin. The powder is fine and has a strong ability to cover the background. ... moreA set of 4 colors is available. 5 different color combinations are available to suit different needs.
$
51.57
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Certified & Food Safe - Craft Resin epoxy is minimally odorous, non-toxic, free from VOCs & solvent materials. User-Friendly, 2:1 Ratio Kit - Perfect ... morefor beginners, our epoxy resin kits are a breeze to use.
$
22.99
Buy It Now
Free Shipping
Condition: New
Location: Lillington, United States
16oz Kit: Epoxy Resin + Hardener Kit (8oz. Epoxy Resin + 8oz. Adverse allergic reactions can occur. Always wear nitrile gloves when handling or mixing ... morethe resin and hardener and use a respirator if mixing in a poorly ventilated area. ).
$
29.99
Buy It Now
Free Shipping
Condition: New
Location: Missouri City, United States
About this item 【Perfect Epoxy Resin Kit】:Includes 500ML clear resin, 500ML clear hardener (Total 1L) 【High Quality Epoxy Resin】:Crystal clear, easy to ... moremix, less bubbles and self defoaming self-leveling function, safe and non-toxic, filler does not settle after mixing, easy to complete perfect works without worry. 【Perfect Works】:Glossy surface after the table top epoxy resin is cured, perfect texture, no yellowing and high temperature resistance, wear-resistant and durable, ideal for projects such as desktop coating. 【Easy to Use】:Epoxy resin 1:1 easy to mix by Volume, Full cure time is 8-12 hours in Summer, 24 hours in Winter. Hardness range 70-80D Ideal for casting, coating, artwork, suitable for coasters, countertops, crafts, jewelry making, painting, molds, woodwork, etc.
$
15.92
Buy It Now
Free Shipping
Condition: New
Location: Brooklyn, United States
Color 1000g. 1000ml Bulk UV RESIN HARD: The use of more advanced raw materials (epoxy acrylate) makes the curing effect of the UV light resin harder and ... moremore perfect without sticky residue. Material Epoxy Resin, Resin.
$
43.54
Buy It Now
Free Shipping
Condition: New
Location: Novi, United States
1000ml Bulk UV RESIN HARD: The use of more advanced raw materials (epoxy acrylate) makes the curing effect of the UV light resin harder and more perfect ... morewithout sticky residue. Manufacturer Bsrezn. CREATIVE APPLICATION: You DIY with uv drying transparent resin with yellow-resistant properties, which can make your craft creativity more lasting vitality.
$
24.20
Buy It Now
Free Shipping
Condition: New
Location: Naples, United States
Epoxy Resin, Upgrade 32 oz 2X UV Resistant Resin, Epoxy Casting and Coating Resin Kit with Sticks, Self Leveling Easy Mix for Art, Crafts, Jewelry Making, ... moreRiver Tables of Art Resin. We will reply within 24 hours.
$
11.83
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Manufacturer Resiners. It has a smooth consistency that won't change when mixed with other ingredients, allowing you to easily create a variety of artwork. ... moreExclusive to Resiners ✔ ✔ ✔ ✔ ✔ ✔ ✔. HIGH-CONCENTRATED: A little goes a long way.
$
21.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
And you can also mix the white color with other colors to achieve translucence. Feel free to blend them to achieve the color you desire! Free 5 pairs ... moreof disposable gloves will protect your hands clean while doing crafts.
$
15.75
Buy It Now
Free Shipping
Condition: New
Location: New York, United States
HIGH QUALITY – This epoxy resin dye is made of high quality material,non-toxic and non-radioactive. Our resin dye mixes wonderfully with epoxy resin. ... moreMIX WELL WITH RESIN. Color 12 colors 18 colors 18 colors 24 colors Clear (uv resin).
$
48.00
Buy It Now
Free Shipping
Condition: New
Location: Missouri City, United States
The resin 1:1 mix ratio by volume, can deep pour up to 1.2" one time 1 Gallon kit : 64 Oz resin + 64 Oz hardener (Total 1 Gallon) The resin specially ... moredesigned with Low viscosity, convenient 1:1 mix ratio by volume, long pot life, room temperature curing system with great clarity and a high gloss finish. Each time the resin mixed, pour No more than 150ml, with a thickness range of 0.4" -1.2" (1-3cm), to avoid bursting. and If multiple additions are required, the operation time should be controlled within 5 minutes in summer and 30 minutes in winter to avoid layering.
$
49.00
Buy It Now
Free Shipping
Condition: New
Location: Houston, United States
The resin 1:1 mix ratio by volume 1 Gallon kit : 2L resin + 2L hardener The resin specially designed with Low viscosity, convenient 1:1 mix ratio by volume, ... morelong pot life, room temperature curing system with great clarity and a high gloss finish. Perfect for tabletops, fiberglass work, small castings (under 1"), electrical potting, jewelry making, concrete - pebble coating, marine applications- boat building, & wood water proofing - repairs. Note: Each time the resin mixed, pour No more than 150ml, with a thickness range of 0.4" -1.2" / 1-3cm, to avoid bursting. and If multiple additions are required, the operation time should be controlled within 5 minutes in summer and 30 minutes in winter to avoid layering.
$
26.99
Buy It Now
Free Shipping
Condition: New
Location: Louisville, United States
【Perfect Works】:Glossy surface after the table top epoxy resin is cured, perfect texture, no yellowing and high temperature resistance, wear-resistant ... moreand durable, ideal for projects such as desktop coating.
$
23.85
Buy It Now
Free Shipping
Condition: New
Location: Mahwah, United States
Everything you need to start your project is included, perfect for experienced people and beginners. 【High Quality Resin Epoxy】:Crystal clear, easy to ... moremix, less bubbles and self defoaming self-leveling function, safe and non-toxic, filler does not settle after mixing, easy to complete perfect works without worry.
$
105.00
Buy It Now
Free Shipping
Condition: New
Location: Murrieta, United States
For your consideration is a 100% solid, crystal clear, 1:1 mix ratio, epoxy resin. This is not a cheap polyester resin. You will receive 2 gallons of ... morematerial. Because this resin is 100% solid, it is pure, and does not contain cheap phenols or fillers.
$
69.00
Buy It Now
Free Shipping
Condition: New
Location: Nashville, United States
Ultra Clear Epoxy Resin - Bar Top, Countertop, Table Top Epoxy - 2 Quart Kit. 2 Quart Kit (1 Quart Resin + 1 Quart Hardener). The patented one coat system ... moreistwice as thick as standard epoxy creating a nearly indestructible surface.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
Resin Obsession Super Clear Epoxy Casting Resin for jewelry and crafts 6 oz
Resin Obsession Super Clear Epoxy Casting Resin for jewelry and crafts 6 oz Exciting News: A super clear. Non yellow, jewelry quality resin! Enjoy the advantages of the Resin Obsession branded Super Clear Resin: bubbles easily dissipate shipped worldwide non-toxic formula low to no odor 2 to 1 formula 4 oz bottle of resin. 2 oz bottle of hardener 25 minute open(pot) time 6-8 hour cure time at room temperature 1 hour cure time with 150 degree F heat. Example: putting it in a hot box Here's what one customer says about the Resin Obsession branded Super Clear Epoxy Resin: I am very excited to send this e-mail to you! As you know I was having some problems with another resin I was using. When it came to big items that was sanded not being clear. Well I just tried your new Super Clear Resin and it ROCKS! I just got done with 2 test bangles ... moreand they turned out great. I did exactly the same thing I did with the other resin and yours is super clear! I am so excited! I was hesitant about switching resins because I am new to resin and had worked out some of the kinks with the other resin when it came to bubbles. Each resin is a little different to work with(I hear) But I am so happy I tried yours. After the bangles were cured. I sanded(under water with a dash of dawn) with wet dry sandpaper 320- 400- 600- 800- 1200- 2000. After that I used your Novus 1- 2- 3 kit. And it brought the clear right back to the bangles. I did not even have to use my buffer on them. I will be putting pictures of them on my face book page is you want to look see. This is also the first bangles I have done with colored ink in them. I have watched some of your videos and I think you do a great job on how to’s. I think you are adorable in the videos! Thank you again for your great work and a great product! Here are some of the most frequently asked questions about the Resin Obsession Super Clear Resin: Question: How do I mix super clear resin? Answer: You will need to mix 2 parts of resin(part A) to 1 part of hardener(part B) Question
MIXOL Universal Tinting Paste for epoxy resin furniture stain - #4 oxyd red 20ml
For auction is a small(20ml) bottle of Mixol"Universal Tinting Paste" 4 Oxide Red color. This unique German-formulated dye is universal in that it will mix with both water and spirit-based media so you can use it to tint epoxy, resin, wood stain& varnishes. Also it is binder free so it does not dry out, and has a shelf life of at least 36 months. I bought this last August, used a bit of it to mix with some wood stain; I ended up using a different(lighter) finish altogether and I don't anticipate using this so I thought I'd put it out for someone who will use it- it is pricey stuff, cost $5 just for this little bottle! It comes with the empty box with full instructions in English. I will ship this in a padded envelope, and I usually ship the same day payment is received. Email any questions, thanks for looking! RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13e572d1fbe-0xf5-
Epoxy Resin Lab Sink w/ Water Filtration system. NO RESERVE
Eureka Technology is selling this used lab sink/water filtration system(Activated carbon& paper) For specific questions/inquiries please do not hesitate to message us. If the buyer is not able to pick up the instrument. The buyer will be reponsible to arrange freight shipping, at his cost, and we will negotiate a reasonable price to crate the unit for you. Note: $1 charge for shipping is just a place holder and actual shipping costs will be much more. Eureka Technology based out of Paola. Kansas is having a huge lab liquidation sale. We are selling many years worth of lab supplies and equipment including many pieces of: Glassware, lab tables, cabinets, spectrometers, balances, microwaves, filters, pressurizers, boilers, forklifts, hot plates, and much more. If searching for specific items or interested in purchasing multiple items please ... moredo not hesitate to call us at(913) 207-7206 and we will gladly work out a fair deal ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13eac4c37f2-0x100-
33' Fisher Hamilton Laboratory Cabinet Island w/ Epoxy Resin Counter Tops
Welcome to National Laboratory Sales! 33' Fisher Hamilton Laboratory Cabinet Island with Epoxy Resin Counter Tops About These Cabinets: We are pleased to offer these great condition Laboratory Cabinets by Fisher Hamilton. We have a multitude of these cabinets in stock and ready to ship. They are Fisher Hamilton Brand. The Counter Tops that are Included are an Epoxy Resin Top. All the cabinets were recently removed from clean rooms in a food processing facility. We have multiple groupings of these same cabinets. Please view our other listings in our eBay Store. Because of our large inventory of these cabinets we can cater to any specifications that you may need. Please Contact Kyle with All Questions@ 815/ 670- 6400 All Cabinets are 36" Tall x 21-1/2" Deep. Dimensions Below Are for Cabinet Widths. Cabinets Included. Pictured ... moreleft to right: 48" 2 Door 18" 4 Drawer 30" Pencil Desk 30" Back Filler Panel 30" 2 Drawer 2 Door 18" 4 Drawer 1-1/2" Spacer 58" 2 Door Sink Base 1-1/2" Spacer 18" 4 Drawer 30" 2 Door 2 Drawer 30" Pencil Desk 30" Back Filler Panel 18" 4 Drawer 48" 2 Door 14-3/4" Spacer This Set Also Includes: 1x Sink Basin 1x Cup Sink 1x Dual Sided Air Valve 2x AC Power Jacks 2x CAT 5 Internet Jacks Call Kyle With Any Questions@ 815) 670 6400 STOCK# WE WILL HELP WITH SHIPPING. THERE IS NO EXTRA CHARGE FOR PREPPING OR LOADING. We make every effort to accurately describe each item we sell and to give buyers the information needed to bid with confidence. We Accept ALL REAL Offers! Questions? Call Kyle(815) 670-6400 About National Laboratory Sales Whether you’re building a new Lab or upgrading your existing one. You’ll find a remarkable selection of Casework, Workstations, Fume Hoods and related lab products. Most of our items can be shipped quickly in most cases less than a week. Our custom design service will suit the most discriminating buyer. Our wide range of choices. Solid construction and high-quality finishes allow
SCORPION EPOXY RESIN BELT BUCKLE SALMON PINK
Salmon Pink Scorpion Belt Buckle This listing is for an epoxy resin belt buckle. The buckle has a salmon pink coloured background with a real scorpion set into epoxy resin in a silver effect frame. This belt buckle fits standard 3.75cm( 1.5 inches) belts. Brand new. But unfortunately the buckle has a small scratch across the top! This belt buckle usually retails on our website at £ 10.00 saving you £ 5.01 on our RRP! Buckle Size: 10cm x 7.5cm( 4 x 3 inches) More colours. Items and sizes available in this range. Shipping: Usually within 1 working day. Aim within 3 working days, arrival usually 1-2 working days following dispatch(UK) Items are dispatched via Royal Mail First Class in the UK. Item ships from our Birmingham office. Returns: We comply with distance selling laws and offer a no-quibble refund within 7 days of arrival. ... morePlease see our returns policy for full details. Payment: For clearance items such as this we will only accept payments via Paypal. You can visit our stores in Birmingham or our website where we have around 2000 items! Buy with confidence! We are a VAT registered limited company based in Birmingham UK and it was our 10th birthday on June 26th 2010!
Australia Opal and Kangaroo Continent Shape Pin Goldtone Resin Epoxy
This is a smallish gold-toned pin in the shape of Australia. It has a kangaroo in the center and chips of opal embedded in the epoxy. It has a C clasp on the back. But it's modern. The pin measures a hair over 1x1.25 inches and looks new. It may well be; someone brought this back from a trip to Australia and threw it in the back of a drawer. All payments due 7 days after auction close. I will combine shipping where physically possible. If you are the winner of multiple auctions and wish to combine shipping. Either contact me or wait for an invoice before paying. First class and Media Mail packages ship FREE to APO/FPO buyers. Just remind me if I don't catch it before sending your invoice. Ebay-mandated disclaimer- since I sell to folks outside of the US) International Buyers– Please Note: The USPS just put through a massive rate hike ... moreon international postage as of January 27. 2013. If the postage rates look high to you, they look worse to me. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as‘gifts’ US and International government regulations prohibit such behavior. If you are bidding by phone. Please be advised that some images and description elements may not be visible to you. Some people using phone apps cannot see self-hosted images. The only non-paying bidders I've encountered have all been new to Ebay and didn't really understand that a bid is a binding contract. We all have to start somewhere. But if you are a beginner please make sure you understand the rules before bidding. Star ratings: this only applies if you leave feedback(which is always optional) Ebay tel
SULZER MIXPAC EPOXY MIXING DISPENSER WITH ACCESSORIES 1:1 2:1 RATIO RESIN GUN
SULZER MIXPAC EPOXY RESIN MIXING DISPENSER WITH EXTRA PLUNGERS 1:1 RATIO 2:1 RATIO 1 UNMARKED GOOD WORKING CONDITION SEE ALL PHOTOS FOR BEST DESCRIPTION CHECK OUT MY OTHER AUCTIONS POLICIES DAILY SHIPPING DELIVERY CONFIRMATION COMBINED SHIPPING WHEN POSSIBLE PAY PAL WITHIN 48 HOURS RETURNS ACCEPTED FRAGILE ITEMS PACKED WITH EXTRA CARE PLEASE CONTACT ME ANYTIME I AM NOT AN EXPERT BUT I TRY TO BE AS ACCURATE AS POSSIBLE IN MY DESCRIPTIONS I AM HAPPY TO ASSIST YOU WITH ANY QUESTION YOU MAY HAVE THANK YOU FOR LOOKING
SALE Natural Stone/tile in Epoxy Resin Table Hand Crafted Wood Frame Art DECOR
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! SALE Natural Stone/tile in Epoxy Resin Table Hand Crafted Wood Frame Art DECOR weight over 140 pound before packaged and wrapped a very heavy grade sturdy table Could be finished with exterior grade sealant and used for a patio of deck Functional Artistic piece Beautiful Collection of Rare Stones with tile border Artistic lay out with epoxy resin sealant encapsulation of Some Rare and collectible Natural Stones with stone and Tile boarder. the Hand crafted well detailed Natural wooden Frame is in good shape but needs to be refinished and the Base Leg section needs some repair easy work for the handy man The table weighs 105 pounds and the base is 33 pounds we disassembled the base and covered the unit with card board and shrink wrapped it the total weight is about 140 pounds the ... moreresin on one corner has a raise spot and the back has a small area that the resin seeped through the resin can be sanded and polished. The materials to build one of the unique style tables cost over the starting bid. most of the tables of these types sell for over 4000.00 But because it does need repair I'm listing it at a much lower price. The base leg section has a cracked corner piece although would not be seen it can easily be repaired if desired see the photos representing this area. Shipping can be arranged even though it is listed as local pick up UPS estimated shipping in the USA is about 150 On Dec-08-12 at 15:41:57 PST. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back Posted with
SEAMCO STONE BOND EPOXY RESIN (2) 2.839 LITER Part A
RELAX! YOU'RE COVERED. INSURANCE IS INCLUDED IN THE HANDLING CHARGE FOR YOUR PROTECTION. SEAMCO STONE BOND EPOXY RESIN(2) 2.839 LITER CANS Part A. THIS RETAILS FOR A LOT MORE. BUT NOT HERE. THE PHOTO IS WRONG. BUY YOU CAN BUY WITH CONFIDENCE. THESE PARTS ARE VERY SCARCE AND HARDLY EVER LISTED HERE ON EBAY. SO BID TO BUY. 1 TO 2 POUND ITEMS WILL BE SHIPPED IN 24 HOURS BY PRIORITY MAIL MONDAY TO FRIDAY. 99% OF THE TIME* ITEMS 3 POUNDS OR MORE WILL BE SHIPPED SAME DAY OR NEXT DAY BY PARCEL POST. FEDEX OR UPS DAY GROUND MONDAY TO FRIDAY, 99% OF THE TIME* If I am away on vacation. I will leave the dates I will be away on my PICK A PART Store description. If time is an issue, please check first, Thank You. TO CHECK OUT MY EBAY STORE FOR MORE PARTS FROM THIS SAME CAR. CLICK HERE I ADD 50 ITEMS EACH WEEK. WHY NOT ADD ME TO YOUR favorites list! ... morePLEASE READ BEFORE BIDDING ON THIS. THERE IS A $10.00"EXTRA" HANDLING CHARGE FOR SHIPPING OUT OF THE U.S. AND INTO"CANADA" AS CHARGED BY USPS.COM. THIS COVERS TIME AND GAS TO AND FROM THE POST OFFICE. TIME TO STAND IN LINE AND THE BOX ITSELF. IT IS BASED ON WEIGHT AND/OR SIZE. ALSO, IF YOU ARE OUT OF THE 48 CONTIGUOUS U.S. STATES. PLEASE REQUEST YOUR SHIPPING CHARGES"BEFORE" YOU COMMIT TO BUY THIS. IT MAY AVOID AN UNPLEASANT SURPRISE. ONLY PARTS LISTED WITH A GUARANTEE HAVE A GUARANTEE. THE LENGTH OF TIME IS TIMED FROM MY SHIP DATE TO ITS RETURN BACK TO ME. JUST PAY THE RETURN SHIPPING. I CANNOT TEST ANY OF THE MECHANICAL AND ELECTRICAL PARTS. THEREFORE THEY ARE ALL BEING SOLD AS IS. SORRY. PLEASE. PLEASE, PLEASE CONSULT AN EXPERT. NOT ME. AS TO WHAT OTHER YEARS AND MODELS THESE PARTS WILL FIT. PLEASE BE ASSURED THAT I WILL PROVIDE YOU WITH THE BEST POSSIBLE DESCRIPTIONS& PHOTOS FOR YOU TO MAKE AN INFORMED DECISION. I WOULD RATHER BE TOTALLY HONEST THAN DEAL WITH AN UNHAPPY BUYER AND GO BACK AND FORTH WITH EMAILS. I WILL NOT END LISTED AUCTIONS EARLY. PLEASE DON'T ASK, IT'S NOT FAIR TO ANYONE. On Dec-31-08 at 23:56:50 PST. Seller
VINTAGE SILVERTONE ROUND SHAPE BLACK EPOXY RESIN ADJUSTABLE RING
Vintage silvertone adjustable ring in a round shape with a black epoxy resin shape. Ring should adjust from a size 6 to 8 for sure and maybe larger. Measures about 1 inch round.
Vintage 1970s Designer Alessi Italian Epoxy Resin Bake Coloured Steel Bowl
Vintage 1970s Designer Alessi Italian Epoxy Resin Bake Coloured Steel Bowl Search This auction is for a fabulous 1970s Alessi bowl as pictured. It measures 9 3/4" in diameter. Has the original label and is in very good condition with light wear and just needs a clean as can be seen. Please see our other auctions for more unusual items and to combine postage. Important- please read below: Royal Mail have increased the postal prices from April 2013. We try to remain as competetive as we can but the price increases have made a big difference to the costs! We will always combine postage to save buyers money and. Especially now, this means that courier shipping for a few items or more will be much more competetive and work out much cheaper per item so please see our other listings incase there is anything else you would like! Also if shipping ... morequoted is'courier' or'freight' please note this only covers UK mainland, not Highlands, Islands or Northern Ireland; we can send to these destinations but it will be a little more expensive I'm afraid. Payment by cheque or paypal please(UK) And please note that we have a young family and a new baby and can only gurarantee to get to the post office on a Tuesday and Wednesday; we guarantee to post any items paid for by 12.00 noon on Wednesdays but anything after that may have to wait until the following Tuesday. If we can get to the post on other days we will and will always try to help if you are in a hurry for the item as a present etc but please email first as we'd hate to dissappoint. Also if you email us please bear with us for the same reason, we will check emails as often as he allows us and will always respond! Collections are welcome but again we need to fit these around the family so Tuesday or Wednesday daytimes would be best but again we will accomodate other days and times if we possibly can. Again please email to check. International buyers are very welcome but please be aware that overseas postage can be VERY expensive. Especially on item
vintage mid century modern bathroom lucite epoxy resin seahorse ORANGE glitter
vintage mid century modern bathroom lucite epoxy resin seahorse ORANGE glitter from grandmas estate first the back and side photos are the true orange the front photo got washed out one small chip on back. doesnt show on front overall size is 8x4. from a smoke free home. Shipping: shipped in 24 hrs of your payment. Shipping is your choice USPS. drop me a note if you are looking at more than one auction tell me which auctions and your zip code and ill get you the best postage i can do BEFORE you bid i ONLY charge the USPS price nothing is added. i do NOT make any money on the postage. Payment: If not using a BUY IT NOW. Please plan on paying with in 2 days, thank you Refunds: Please read the listing closely. i do my best to include measurements and other information so you can make a good choice. We are all Human. if i make a mistake in the ... morelisting drop me an email and we can deciede what to do( i can not return postage.
Aeromarine High Performance Epoxy Resin Adhesive 300 11 - Softball Bat End Cap
This is a barely used 1 quart kit of Aeromarine 300/11 epoxy resin. You would receive the exact bottles pictured with the exact pictured amount left in them This is a high performance epoxy adhesive usually used in the manufacture and repair of aircraft. Boats, sporting goods, and industrial products It bonds wood, metals, fiberglass, and most hard plastics. It's not recommended for use on polyethylene, polypropylene, or Teflon. It is also widely used for electronic potting and encapsulation. 300/11 is the epoxy resin of choice used by anyone who has ever had to replace an end cap on a softball bat Together. Epoxy resin#300 and hardener#11 are used 1:1 by volume Epoxy resin#300 can also be used 2:1 by volume with hardener#21 Hardener#21 can also be used 1:1 by volume with epoxy resin#400 A 1 quart kit usually sells for about $40 + shipping ... moreColor = Clear Amber Buyer pays shipping Shipping to USA only Paypal only Will ship only after reception of payment Non paid item strikes will be pursued Item is packaged& ready to go I pride myself on shipping items to customer very quickly No returns
Kewaunee Scientific 6' Lab Work Bench Workstation Epoxy-Resin Table 2-Drawer
Questions? Call us: 1-877-328-9236. Kewaunee Scientific 6' Lab Work Bench Workstation Epoxy-Resin Table 2-Drawer. Manufacturer: Kewaunee Scientific Model: Unknown Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Kewaunee Scientific Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Kewaunee Scientific 6" Lab Work Table, Specifications: Manufacturer: Kewaunee Scientific, Model: Unknown, Surface Work Area: 6'W x 31"D x 31"H, Material: Durcon. Epoxy-Resin, Overall Dimensions: 6'W x 31"D x 35"H, 2- Drawers: 16-1/2"W x 18"D, SKU: N49L002 For questions regarding this item. Please reference the SKU to help us ... morebetter serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. This item will be shipped on a pallet via LTL Freight. Please fill out to receive a shipping quote. Buyer pays for all shipping costs. This cost includes professional packing& insurance. Handling time is two to three business days after receiving cleared payment. Transit time varies. Please contact us for details. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Local pick up is available for buyers
12' Lab Workstation Workbench Casework & Cabinets Table Epoxy-Resin Top
Questions? Call us: 1-877-328-9236. 12' Lab Workstation Workbench Casework& Cabinets Table Epoxy-Resin Top. Manufacturer: Unknown Model: Unknown Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Unknown Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: The buyer is responsible for putting on his/her own hardware to secure the middle two drawer section to the side cabinets. NOTE: The back splash is glued to the table top and one of them came off. As seen in the second image. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) 12' Lab Work Table Casework& Cabinets, Specifications: Manufacturer: Unknown, Model: Unknown, Work Area(two separate pieces) 2- 73"W x 22-1/2"D, Epoxy-Resin, ... moreHeight(ground to top) 31" All The Pieces: 1- Center Piece: 72"W x 22"D. 2 drawers, 2- Side Cabinets: 2-drawers. 2-doors, 22"D x 30"H x 36"W, 2- Tops. 73"W x 24"D(overall) SKU: N49L003 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. This item will be shipped on a pallet via LTL Freight. Please fill out to receive a shipping quote. Buyer pays for all shipping costs. Thi
LARGE DICE EPOXY RESIN GOOD CONDITION DICE VERY RARE DICE AMBER DONATION
Description: DEAR BUYER. WE OFFER VERY RARE DICE FROM EPOXY RESIN(NOT SURE 100% IT'S EPOXY RESIN) IN GOOD CONDITION. THERE ARE SCRATCHES AND SO ON. BIG SIZE- MEASURES- 3 CM. SIDE 28 GRAMS WEIGHT BIG COLLECTORS DIE DICE FOR MORE DETAILS. PLEASE LOOK AT THE PICTURES. YOU BUY WHAT YOU SEE ON THE PICTURES. What a super addition to any collection ~ just waiting to be displayed and enjoyed! Good Luck& Happy Treasure Hunting! visit my store. Combine shipping_ Only PayPal is Accepted/ Available funds. 2-4 Days Payment is required after the Winning Bid. Item will be shipped immediately on the same or next business day of receiving clear and payment. I Ship With Registered Mail(Tracking Number) or EMS express BulPost(FOR EMS EXPRESS SHIPPING ASK FOR PRICE TO YOUR COUNTRY) Paypal Confirmed Addresses Only Tracking Number Will Be Provided To The ... more24-48 Hours Perfect and 100% safety packed About us: We Offered You All Kind Of Antiques And Old Things. All Of Our Products Are Authentic. I Will Try To Describe Them As Much As I Can. DELIVERY FOR USA ESTIMATED WITHIN 15-20 BUSINESS DAYS. SOMETIMES 25 DAYS AND MORE. International buyers are responsible for any taxes or duty fees their specific country will levy on the package] On Jul-20-13 at 17:18:00 PDT. Seller added the following information:
#b239 Resin Sink Tapered Rectangle Black Epoxy / LAB Sink
WE BUY OBSOLETE AND EXCESS INVENTORY! LOCAL PICK UP ONLY! Please bid ONLY if you can come and pick this up in San Diego(Mira Mesa area) within 5 days of winning bid. We will not be shipping this and our hours are 8am- 4:30pm Mon- Fri. This is a used rectangle tapered black resin sink. This epoxy resin sink is in good condition. The dimensions of this single drain sink is 30" wide x 17" long at the top and 26" wide and 13" long at the base. Inside dimensions are 28" wide x 15" long at the top and 25" wide x 11" long at the base and 12" deep. With a 1-1/2" drain opening. Selling the unit pictured. Selling it AS IS and for local pick up only. All items are sold AS IS. Need to contact us? We are open 8-4:30 PST Mon-Fri. phone#858-658-9207. THIS ITEM IS LOCAL PICK UP ONLY! NO SHIPPING ON THIS! ... moreItem is to be paid for and picked up within 5 days of winning bid. CA buyers. Please remember to include 8% tax with payment! Please make sure to view our page before bidding. We accept paypal payments. See our terms of sale page for additional payment options. TERMS OF SALE
Resin Mold Round Disk Standing Paperweight Display Trophy Vertical Epoxy SECONDS
Resin Round Standing Epoxy Mold with Flaw NOTE: One mold has 2 tiny specks and one has a 5/8" 15mm) scratch in the surface of the casting areas. See photos. These may affect the casting and may require some extra finishing. The price has been reduced because the surface flaws. Size is 4 3/8" x 4 3/4" wide x 3/4" thick(11.1cm x 12,2cm x 2cm) Holds 8 oz Mold is made of self-releasing. Re-usable polypropylene. For use with any resin epoxy or polyester casting resin. Use for trophies. Awards, paper weights, display, signs. Embed fun items. Memorabilia, or collectibles. Instructions& tips sheet included with a link to pdf resin jewelry& project books. Photos are tips& ideas. Made in USA. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. ... moreOrders are usually shipped the same or next day of confirmed payment. Returns accepted within 30 business days in original condition. I welcome international buyers! All additional items(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Mold 2" 53mm Hearts 2 Count Jewelry Heart Pendant Epoxy Molds SECONDS
2" Hearts 2 Count Tray Resin Epoxy Mold with Flaw NOTE: Molds have a slight raised area in the casting surface. See photos. This will require some extra finishing or just use the other heart. The price has been reduced because the surface flaw. Hearts are 2" x 2 1/8" 53mm) x 3/8" deep. Holds 3/4 oz. Instructions& tips sheet included with a link to pdf resin jewelry& project books. These molds can also be used with chocolate. Fondant, polymer clay. Photos are tips& ideas for pendants you can make. Made in USA. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry, air dry only. Heart pendant ideas by Lunaricsales. TheFunkyJunky. Any questions. Please email. Policies: Check-out after your shopping is finished ... moreor add to Cart. No need to pay one-at-a-time. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within 30 business days in original condition. I welcome international buyers! All additional items(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Mold Hexagon Base 3" 77mm Epoxy Paperweight Embed Items Trophy SECONDS
Hexagon Base or Embeding Paperweight Resin Mold with Flaw NOTE: Mold has a slight raised spot in the casting area. See photos. This will require some extra finishing or just use the other shapes. The price has been reduced because the surface flaw. Base bottom size is 3" 77mm) x 1" 25mm) deep. Top of mold is 1 7/8" Holds 3 oz. Use as display base. Embed items or specimens, or paper weight. Mold is made of self-releasing. Re-usable polyethylene. Instructions& tips sheet included with a link to pdf resin jewelry& project books. Mold release/conditioner is recommended for longer mold life but not required. Made in USA. Plastic molds are easily scratched. Which will show up on resin surface, so don't scrub to clean, or wipe dry, air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished ... moreor add to Cart. No need to pay one-at-a-time. Payment must be completed within 4 days. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within 30 business days in original condition. I welcome international buyers! All additional items(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. eBay's Global Shipping Program available on request. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Mold 11 Pairs 22 Count 8x9 Tray Epoxy Jewelry Molds Pendant SECONDS
Jewelry Pairs 11 Pairs 22 Count Resin Epoxy Mold with Flaw NOTE: Mold has tiny black speck in the surface of one or two of the casting areas. See photos. These may affect the casting and may require some extra finishing or just use the other shapes. The price has been reduced because the surface flaws. Large ovals are 29x36mm. Small ovals 15x20mm, rectangles 25x36mm, puff hearts 27x29mm, squares 18mm, large bars 15x43mm. Instructions& tips sheet included with a link to pdf resin jewelry& project books. Photos are tips& ideas and are not included. Made in USA. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry; air dry only. Jewelry sample ideas by Lunaricsales and are not included. Any questions. Please email. Policies: Check-out ... moreafter your shopping is finished or add to Cart. No need to pay one-at-a-time. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within 30 business days in original condition. I welcome international buyers! All additional items(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Mold Lg Coat of Arms Unicorn Style-Cast 6049 Display Trophy Epoxy Mold
used. large mold 20" x 12" resin casting mold Coat of Arms uses 100 oz clearcast. 200 drops catalyst THE SMALL PRINT: I ADD TO THE BOTTOM OF ALL MY LISTINGS) I'm only a message away. I work out of my home so I receive and attempt to answer your questions immediately. I'm always happy to add to the item description and/or take additional photos as requested. Thank you for looking at my item. I look forward to a great transaction with you. If you ever feel like the shipping charges are too high. Please contact me prior to bidding and I will be happy to double check the weight/ size of the package and offer alternative shipping methods if possible. I want your shipping charges to be a cheap as possible. I do not mark up shipping charges, nor do I charge any handling/packing fees. If there is ever any discrepancy between they ... moreshipping cost you paid and the actual shipping charges when I go to print the label greater than $.25 I will automatically refund you the difference via paypal. A note about FREE SHIPPING: From time to time I will place items on sale and offer to ship them for free. When I offer free shipping I reserve the right to ship the item by the cheapest possible method regardless of the carrier. If you would prefer that I ship your item by a specific method. Please contact me prior to bidding and I will calculate that shipping cost for you. After the bidding has ended I will have to send you an separate invoice via paypal to cover the additional shipping cost. This invoice as well as the sold items invoice must be paid before I ship the item. I strive for nothing less than 5 star service across the board. My ebay account is linked to my iphone. So I receive instant notification when I receive a message from ebay, an items sells, and when checkout is complete. I am normally able to respond within the hour of you posting a question. I am happy to take additional photos and add them to the listing when possible(ebay only allows me 12 photos per item) JUST ASK. I list a number of items that
BENGAL TIGER HEAD GOLD TONE METAL AND EPOXY RESIN LAPEL /HAT PIN
CONDITION: SEE ABOVE MEASURES: 1 1/4" HIGH x 1 1/8" WIDE CLUTCH LOCKING DEVICE ON THE BACK
Resin Obsession Color Blast Epoxy resin - jewel tone colors resin jewelry making
Azul PurchasePrice 0 StorageLocation Ruby PurchasePrice 0 StorageLocation Emerald PurchasePrice 0 StorageLocation Plum PurchasePrice 0 StorageLocation- Resin Obsession Color Blast Epoxy resin- jewel tone colors resin jewelry making Want to get the same incredibly resin color every single time? Try the Resin Obsession COLOR BLAST resin! Our two part resin mixes as two parts colored resin to one part hardener. Mix thoroughly and you have a 60 minute pot time to use in your resin castings. The bubbles easily dissipate in this formula. Making it ideal for your resin projects! Choose from 4 limited edition colors. Our Resin Obsession Color Blast neon color resin comes in 2 oz jars of part A resin. The colors include: azul. Emerald, plum and ruby. Want to know how to get any color you want? Read our blog post on How to mix Resin Colors. This resin ... moremust be used with our Part B Hardener. P.S. You can use the same hardener as our Resin Obsession Super Clear resin! THIS RESIN CAN SHIP WORLDWIDE. How to use the COLOR BLAST resin: Wear gloves and work in a well ventilated area. Mix Part A(colored resin) thoroughly for two minutes. Carefully measure two parts of Part A in one cup and one part of Part B in another cup. The minimum amount to mix is 10 cc and 5 cc respectively to ensure a good cure. Pour the hardener into the resin and mix thoroughly again for another two minutes. If blending colors. Mix the colors thoroughly before adding the hardener. Don't forget the 2:1 ratio! Don't forget about our other color blast colors! Store policies: We ship orders within 1 business day. Please check your email box for a confirmation. Including a package tracking number, when it ships. All orders shipped to a Florida address will be charged 6% sales tax. Powered by
Resin Molds Teardrop 22x45mm Epoxy Jewelry Mold Pear Pendant Teardrops SECONDS
Teardrops 6 Count Resin Teardrop Jewelry Mold with Flaws NOTE: Molds have a raised speck or 2 in the surface of one of the casting areas. See photos from 3 different molds. These may affect the casting and may require some extra finishing or just use the other spaces. The price has been reduced because the surface flaws. 22x45mm x 5/16" deep. Very slightly faceted Holds 1.5 oz. Instructions& tips sheet included with a link to pdf resin jewelry& project books. Photos are tips& ideas. Made in USA. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry; air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Orders are usually shipped the same ... moreor next day of confirmed payment. Returns accepted within 30 business days in original condition. I welcome international buyers! All additional items(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
CIBA Epoxies Araldite Epoxy Resin 1962 print Ad
AdsceteraJune2008 Print advertisement from a 1962 publication. Size: 8 x 11 inches(each page. 2 page ad) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~. Grade: Grade: VG. Grade definitions: EX: very clean. Vibrant colors, white areas are white, no fading, little surface wear, sharp edges and corners. VG: some light surface wear. Some yellowing to white areas and edges, corners may be slightly bumped. G: light surface wear. Yellowing to white areas and edges, edge and corner wear. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~. SHIPPING: USA: $2.95 USPS 1st Class. CANADA: $3.40 1st Class(Airmail) WORLDWIDE: $5.60 1st Class(Airmail) After first item. All additional ship free. Ads are shipped in a stiff cardboard mailer to keep your item flat and protected. Powered by The free listing tool. List your items fast and easy and manage your active items.
35 inch Epoxy Resin Anti-Vibration Balance Table 48" x 25" x 31 (W x D x H)
Epoxy Resin Balance Table-Black in color. 35" x 24" x 30" W x D x H) 500 lbs. shipping weight. Used with normal cosmetic wear and tear(please see photos) Table has multiple chips and chunks taken out of the top and leg(please see photos) This does not affect functionality. 14 Day Right of Return. Return Policy-14 Day money back returns policy. Buyer pays return shipping. Shipping Information-Will Only Ship To Confirmed Addresses-Dock to Dock delivery-Ships on a pallet 48" x 40" Shipping weight is 500 lbs. Ships by Common Carrier Service. Will ship out within 2 business day once payment has been received-We will be happy to arrange shipping. Just let us know prior to making payment so that we can include the shipping cost on your invoice. Any variations(residential delivery. Ground level delivery etc. must be discussed ... moreprior to purchase and may result in additional shipping charges to be the responsibility of the customer.
Resin Mold Squares 23mm 3/4" 9 Count Epoxy Jewelry Pendant Earring Mould SECONDS
23mm Squares 9 Count Jewelry Resin Mold with Flaw NOTE: Mold has tiny black speck in the surface of one of the squares. See photos. This may affect the casting and may require some extra finishing or just use the other 8 squares. The price has been reduced because the surface flaw. 6 count with slightly rounded top and rounded edges. 23mm or 3/4" Instructions& tips sheet included with a link to pdf resin jewelry& project books. T hese molds can also be used with chocolate. Fondant, or polymer clay as a push mold. P hotos are sample designs. Made in USA. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry, air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to ... morepay one-at-a-time. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Mold Spoon Rest 8" 21cm Trivet Kitchen Epoxy Molds Embed Fun Items SECONDS
Spoon Rest Pointed Handle Resin Epoxy Mold with Flaw NOTE: Mold has flaws& line in the surface of the casting area. See photos. These may affect the casting and may require some extra finishing. The price has been reduced because the surface flaw. Size is 9 1/8" x 3 1/2" 34 x 88mm) x 1" deep at sides. holds 7 oz resin. Embed with fun items! Instructions& tips sheet included with a link to pdf resin books. Made in USA. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry; air dry only. Sample photo ideas by TheFunkyJunky using real hemp leaves& glitter and a similar spoon rest by Rockcandiechic and are not included. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No ... moreneed to pay one-at-a-time. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Mold Round 70mm Jewelry Pendant Belt Buckle Epoxy Jewelry Mould SECONDS
Round Disk Belt Buckle Resin Epoxy Mold with Flaw NOTE: Mold has a speck on the surface of the casting area. See photos. These may affect the casting and may require some extra finishing. The price has been reduced because the surface flaw. Round paper weight. Belt buckle, or jewelry pendant or huge earrings mold Size 2.75" 70mm) x 1/4" deep at center. Holds 1 oz. Instructions& tips sheet included with a link to pdf resin jewelry books. Photos are sample designs. Made in USA Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry, air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Orders are usually shipped the same or next day of confirmed ... morepayment. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Mold Oval 83x56 mm 2x3" Belt Buckle Convex Epoxy Jewelry Mould SECONDS
Oval Convex Disk Belt Buckle Resin Epoxy Mold with Flaw NOTE: Mold has tiny raised black speck and an indent flaw in the surface of the casting area. See photos. These may affect the casting and may require some extra finishing. The price has been reduced because the surface flaws. Oval paper weight. Belt buckle, or jewelry pendant or huge earrings mold Oval is 3 1/8" x 2 1/8" 83x56 mm) x 1/4" deep at center x 3/16" at edge. Or turn over mold to make a concave oval 3 7/8" x 2 7/8" x 1/4" deep at center x 5/8" deep at edge with raised rim which could be a soap dish. Holds 1 oz. Instructions& tips sheet included with a link to pdf resin jewelry books. Photos are sample designs. Made in USA Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. ... moreSo don't scrub to clean or wipe dry, air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Mold Round Dome 4" 10 cm Heavy Duty Epoxy Embedding Paperweight SECONDS
Round Dome Embedment Paperweight Heavy-Gauge Resin Mold with Flaw NOTE: Molds have a raised black speck on the mold in the casting area. See photos. Extra finishing may be required. The price has been reduced because the surface flaw. Size is 4" x 1.75" deep(10cm x 4.5cm) Holds 8 oz resin. Cast in LAYERS or mold will melt! I have special ordered this mold to be made in a higher-grade 80 gauge plastic for better casting and longevity of use. Mold is made of self-releasing. Re-usable polypropylene. For use with any resin epoxy or polyester casting resin. General instructions& tips sheet included. Mold release/conditioner is recommended for longer mold life. Embed fun items. Small snakes/animals, or collectables. Made in USA. NOTE from manufacturer: due to the large mold size. The mold will have slight imperfections due to grain ... morein plastic sheets. Finished product may require buffing/sanding. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry; air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. eBay's Global Shipping Program available on request. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse&
Resin Mold Round Dome 4 Sizes 35mm 28mm 21mm 18mm Cabochon Epoxy Jewelry SECONDS
Round Dome 4 Count Resin Mold NOTE: Molds have a raised black speck in or near one of the casting surfaces. See photo. This may create an indent in the casting and may require some finishing or just use other 3 shapes. The price has been reduced because the surface flaws. Sizes are 1 3/8" 35mm) x 9/16" deep. 1 1/8" 28mm) 7/8" 21mm) 11/16" 18mm) Holds 1 oz resin. Instructions& tips sheet included with a link to pdf resin jewelry& project books. These molds can also be used with chocolate. Fondant, polymer clay. Photos are tips& ideas. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean, or wipe dry, air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need ... moreto pay one-at-a-time. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Mold Epoxy Pyramid 3.5" 87mm Heavy Gauge Square Orgone Paperweight Embed
Pyramid Paperweight Heavy-Duty Resin Mold With Flaw NOTE: Mold has a"grain" in the plastic. See photo, similar to a wood grain pattern. These lines will appear in the castings: use the texture effect or will require extra sanding and polishing. The price has been reduced because this flaw. Size is 3.5" 87mm) square base x 1 3/4" 50mm) tall. Holds 5 oz. Best to cast in layers I have special ordered this mold to be made in a higher-grade 80 gauge plastic for your better casting and longevity of use. Mold tray lip may have brown paper residue from the press process and does not affect the castings. Embed fun items or collectibles. Mold is made of self-releasing. Re-usable PolyEthylene For use with any resin epoxy or polyester casting resin. General instructions included. Made in USA. Photo of rainbow pyramid is a sample idea. ... moreOrgone pyramid by AliensNAngels and is not included. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry, air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboa
Over 103 feet Chemical resistant phenolic epoxy resin black 12" wide 1" thick
THIS LISTING IS FOR ALL THE 12" WIDE PIECES AS DESCRIBED BELOW. TOTALING A LITTLE OVER 103 BOARD FEET. PRICING IS AT 10.00 PER BOARD FOOT IF BUYING CERTAIN PIECES. IF YOU JUST NEED A PIECE OR TWO. PLEASE CALL. THESE BOARDS ARE EXTREMELY DENSE AND HEAVY. CAN ARRANGE SHIPPING/PALLETIZING. BUT BUYER PAYS COSTS. Each shelf has the small holes on underside where deck screws held the shelves to the brackets approx. 6" center to center. Every shelf shows some scuffs. Etc. from use, but none have any damage. Some sizes have lips on front and back edges with cutouts for shelf uprights. And others are basically just 12" x 1" planks. ALL BOARDS ARE 12" WIDE AND 1" THICK; Qty. 8) 71" Long with 7/16" High'lips' on front and back. These have square indents/cutouts with rounded corners on center(2.375"W ... moreX 1.125" Deep) and both ends( 1.25" Wide X 1.125" Deep) Qty. 4) 36" Long with 1/2" High'lips' on front and back. These have square indents/cutouts with rounded corners on both ends measuring 1.125" X 1.125" The below have no'lips. Just straight boards with 3/32" small chamfer along side and front edges; Qty. 6) 72" Qty. 2) 47" Thank You. Kevin Gildea. Gildea Company. 781-243-9699. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14584e4fd71-0x10f-
Lily Corporation CD15 Epoxy resin Injection concrete repair used no reserve
hello welcome.Up for auction is a lily corporation cd15 resin epoxy injection system includes tempest mixer and purge tank.units are used but in good working order no reserve so high bidder wins free shipping to lower 48 states! cart and canisters are not included Because the resin components do not merge until they are within the mixer. Cleanup is limited to the mixer and downstream tubing and port valves. With Gusto, it is easy. Lily Corporation offers a variety of mixers to manage the various viscosities. Rates of flow, mixing characteristics, and pressures. Our Tempest(A-955) mixer was especially designed by Lily to mix super low viscosity resins used for crack injection. The CD15 Dispenser has become the industry standard for epoxy injection. Injecting cracks in more than 25 countries. It has a reputation earned by consistently delivering ... moreprecisely metered resin under difficult construction jobsite conditions. Regardless of the ratio, the difference in viscosity between components, the flow rate, the pressure or the experience of the operator, the CD15 Dispenser consitently delivers thoroughly catalyzed resin. The CD15 is user friendly. The controls consist of a single on/off switch. A single pressure regulator and a pressure gauge. Once the dispense pressure is set, the system will maintain that pressure. This feature allows a single operator to inject numerous ports at the same time. The injection of numerous simultaneously is standard procedure with the CD15 Dispenser. This technique of using a manifold improves the productivity immensely and is especially rewarding when injecting hairline cracks that require longer injection times. The injection of three to six ports at once is common practice. Pneumatic operation and welded stainless steel construction allows the CD15 Dispenser to be used in almost any environment and withstand the the abuses of a construction jobsite. The CD15 Dispenser is designed exclusively for the construction industry by those with more than 45 years experience in construction
Large epoxy resin Photo of Shuttle Take off ,real wood frame
aprox 16x20 photo of space shuttle take off. In a custom wood frame. The entire piece covered in a clear epoxy resin will last a lifetime. Great photo for home. Office, restaurant. as is good luck!
MAS Slow Epoxy Resin Hardener Gallon Tested+Works Perfect West System
MAS Slow Epoxy Resin Hardener Gallon Tested West System No California Buyers Please. Comes exactly as pictured. Please look at all of the pictures. Tested and Works Great. Will be packed carefully and shipped promptly. Thanks. No California Buyers Please as I am not set up to collect sales tax. No Returns Please. Free shipping to the U.S. only Payment is expected within 24 Hours. Usually ships the same day. Thanks. gsrx_vers_568(GS 6.7.3(568)
LW1000RF Meter Mix Dispense Gun, GS, Polyurethane, Epoxy, Resin, Gusmer, BJB ARO
Are you building your own meter mix dispense unit? Or are you replacing your old dispense gun? This Gun is for you! This is a two component needle valve dispense gun made by GS Manufacturing in Costa Mesa CA. This dispense gun has a very easy to use air operated trigger. Meaning you don’t have to worry about wiring your machine for an I/O signal! This gun can be taken apart and rebuilt for under $80. Made from durable aluminum it can withstand a solvent bath and good scrubbing when taken apart for rebuilding. This gun is Like New! It has a brand new OEM rebuild kit in it from GS Manufacturing. All the seals inside are made from Teflon and Viton. So this gun can withstand a large variety of epoxies, polyurethanes and resins. Almost any mix tube will fit on the dispense nozzle. The nozzle also has interchangeable orifices for different viscosities ... moreand ratios(this gun comes with two.099” orifices) Why spend big $$ for a new gun when you can have the same thing for a fraction of the cost!
EPOXY RESIN MALLARD DRAKE
EPOXY RESIN MALLARD DRAKE LIKE LIKE SIZE AND COLORS SIZE: 16" LONG- 7 1/2" WIDE- 12" HIGH
EPOXY RESIN MALLARD DUCK HEN
EPOXY RESIN MALLARD HEN LIFE LIKE SIZE AND COLOR SIZE: 12" LONG- 8" WIDE- 5" HIGH
BINKS 83-5406 PRESSURE POT PAINT TANK 10 gallon GLUE EPOXY Spray Resin
BINKS 83-5406 PRESSURE POT PAINT TANK 10 gallon GLUE EPOXY Spray Pulled Working! Sold As Is! 10 Gallon Tank NOT INCLUDED! 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-146ba0e2b58-0x114-
40 1" round EPOXY Resin Stickers! Clear Dome 2mm Thickness. EASY PEEL. FAST SHIP
CHEAPEST ON EBAY! High Quality 2mm thickness! FAST& QUICK SHIPPING! SAME OR NEXT DAY SHIP OUTS! NO YELLOWING! THESE ARE 2MM IN THICKNESS TO BRING OUT THE BEAUTIFUL 3D EFFECT I. THE IMAGE. HIGH QUALITY 1 inch round clear epoxy sticker. Clear epoxy domes, bottlecap stickers Quantity: 40 stickers Size: 1inch diameter 25.4mm Materials: Soft Resin Height: 2mm High Quality flat back. Adhesive with domed front, magnification on the image. EASY PEEL. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-146e2294b79-0x11b-
5' EPOXY RESIN LAB LABORATORY ANTI-VIBRATION BALANCE TABLE
5' EPOXY RESIN LAB LABORATORY ANTI-VIBRATION BALANCE TABLE Manufacturer: Epoxy Resin Lab Make: Laboratory Table Top Size: 60" X 30" X 2-1/2" Thick 30" High Includes all/only items pictured. Welcome to our eBay store! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. After winning an item in auction or completing a Buy It Now purchase. You have two check-out options: Check-Out Now! Click the at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later If you do not choose to Check-Out now. You will be notified by eBay via e-mail that you are the winning bidder. There is no need to contact us to arrange payment. ... moreWe will automatically send you an e-mail within three hours of an auction closing. Our message will contain a link to our simple and secure checkout system, where you will be able to quickly and conveniently pay for your purchase. You may also continue purchasing additional items from our auctions or eBay store. You have[5] days from the end of the first purchase to add additional items to your order. Make sure all of your auctions have ended prior to checking out. All of your purchases will be consolidated into one checkout! Payment We accept the following forms of payment. PayPal. Sales Tax For shipments to Arizona addresses. We are required by State law to collect 7.8% Sales Tax. Shipping All items under 100 lbs will be shipped either USPS or Fedex. Any items over 100 lbs will be shipped freight through a freight carrier of our choice. Customer Service If you have any questions before or after your purchase please use the ask a question button. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-146f17ee09c-0x10e-
Resin Mold Ovals & Squares 14 count Epoxy Jewelry Buttons Oval Square SECONDS
Ovals& Squares 14 count 6 shapes Resin Jewelry Mold with Flaws NOTE: Mold has a line on the backside of one of the casting surfaces. See photo. Flaw should not affect the castings. The price has been reduced because the flaw. The ovals are 33mm x 25mm. 12mm x20mm, 10mm x 20mm, 14mm x 16mm. Squares are 15mm. 16mm, rectangle 15mm x 20mm. Instructions& tips sheet included with a link to pdf resin jewelry& project books. Photos are tips& ideas. Sample ideas are not included. Made in USA. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry; air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time Orders are usually shipped the same or next day of ... moreconfirmed payment. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Mold Eagle Emblem Boy Scouts 3.5" 87mm Epoxy Chocolate Fondant Molds
Boy Scout Symbol Resin Mold with Flaw NOTE: Mold has a tiny black speck. See photo. The casting area appears smooth. The price has been reduced because the flaw. Size 1.5" 37 mm) x 1/4" deep. 1/8" flat sides with rounded top. Holds 2 oz resin. Instructions& tips sheet included with a link to pdf resin jewelry books. These molds can also be used with chocolate. Fondant, or polymer clay as a push mold. Photos are sample designs. Made in USA. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry; air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within ... more60 business days in original condition. I welcome international buyers! All additional items(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Jewelry Mold Ovals Squares Pendant Earrings 10 Count Epoxy Molds SECONDS
Ovals& Squares Jewelry Mold 10 Count with Grain lines NOTE: Molds have grain lines in the plastic& indented vent holes in center. See photo. These may affect the casting and may require some extra finishing or use the textured surface. The price has been reduced because the surface flaw. 10 count 2 shapes 5 sizes. Rounded domed tops. Ovals are 20x30& 9x18 mm. Squares are 20mm, 16mm, 12mm. Embed fun items for unique handmade jewelry. Instructions& tips sheet included with a link to pdf resin jewelry books. These molds can also be used with chocolate. Fondant, or polymer clay as a push mold. Photos are sample designs. Made in USA. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry, air dry only. Pendant embedding ideas using ... moreother molds by Lunaricsales. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Mold Round Dome 50mm 2" Epoxy Paperweight Embed Fun Items Orgone SEDONDS
Round Dome Embeding Paperweight Resin Mold with Flaw NOTE: Mold has several indents at the vent hole marks. See photo. These may affect the casting and may require some extra finishing. The price has been reduced because the surface flaws. Holds 2 oz Size 2" 50 mm) x 1 1/8" deep For use with any resin epoxy or polyester casting resin. General instructions included. Mold release/conditioner is recommended for longer mold life but not required. Embed fun items. Bugs, specimens, or collectables. Orgone paperweight& pendant idea by Spiralapis using a similar molds. Samples not included. Made in USA. NOTE from manufacturer: due to the large mold size. The mold will have slight imperfections due to grain in plastic sheets. Finished product may require buffing/sanding. Plastic molds are easily scratched. So don't scrub to clean, ... moreor wipe dry, air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within 30 business days in original condition. I welcome international buyers! All additional items(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. eBay's Global Shipping Program available on request. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. R ecycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. New using biodegradable bubblewrap.
Resin Mold Peace Sign Pendant & Earrings 3 Count 58mm 36mm Epoxy Jewelry Molds
Peace Sign Resin Mold NOTE: Molds have black specks in the surface of one of the casting areas. See photo. These may affect the casting and may require some extra finishing. The price has been reduced because the surface flaw. Peace Signs Pendant and/or Earrings 3 Count. 2 1/4" 58mm)x 1/8" deep& 1 7/16" 36mm) Instruction& tips sheet included with a link to pdf resin jewelry& project books. These molds can also be used with chocolate or fondant. Made in USA. Photos are tips& ideas. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry; air dry only. Sample photo ideas by TheFunkyJunky and is not included. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to ... morepay one-at-a-time. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Epoxy Lab Work Bench / Station Table Top 96" x 36" x 1"
This bench top is in great shape. But the base it was on, was not. This Resin top is VERY heavy(around 245lbs) and is; 96" x 36" x 1" Buyer is responsible for arranging freight. Pelleting is included in purchase price.
Epoxy Resin Over Metal Ferrari Logo Emblem Plate Badge
Epoxy Resin Over Metal Ferrari Logo Emblem Plate Badge measuring approximately 4.5" tall X 2" wide. This metal plate has a 23mm x 9mm bracket welded on back extending approx. 13mm tall with a pair of 3mm in diameter holes drilled through each side for attachment( purposes. This plate is in very good condition with light gold flaking in back. I am not sure what this plate goes to or its purpose/function. There are no other makers or identifying marks other than what is on the front. A nice display plaque/badge for a garage. Dorm room or man cave. FREE SHIPPING! Posted with
Resin Mold Round Domes 48mm 2" 6 Count Epoxy Jewelry Pendant Orgone Dome SECONDS
Round Domes 48mm 6 Count Resin Mold with Flaw NOTE: Molds have a speck embedded in one of the casting areas. See photos. These may affect the castings and require extra finishing or just use the other rounds. The price has been reduced because the surface flaws. Size 1 7/8" 48 mm) x 5/8" deep. 1/4" flat side with rounded top Holds 4 oz. Instructions& tips sheet included with a link to pdf resin jewelry books. These molds can also be used with chocolate. Fondant, or polymer clay as a push mold. Photos are tips& ideas. Embeding ideas using other molds by Lunaricsales and Orgone pendant by Spiralapis. Samples not included. Made in USA. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean, or wipe dry, air dry only. Any questions. ... morePlease email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-147afc29c7c-0x111-
3 bangle epoxy resin molds 8" 9" 10"
This listing is for 3 epoxy resin bangle molds. They are 8 inch. 9 inch, and 10 inch diameters and are between 1/2 inch and 3/4 inches deep. The 2 smaller ones have been used once and the larger one has never been used. There is nothing wrong with them i just have not used them after that one time and i'm trying to make room for new things. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-147bf29f2ae-0x110-
Resin Mold Stars & Jewels 11 Count Epoxy Jewelry Octagon Diamond Bar SECONDS
Mixed Jewels with Stars 11 count. 7 shapes Resin Jewelry Mold with FLAW NOTE: Mold has a 5mm long mark in the large star. See photo. This will create a raised line in the casting and may require some finishing. Or just use the other 10 shapes. The price has been reduced because the flaw. Large star is 2" x 3/8" deep(5cm x 9mm deep) Medium star is 1 3/8" 35mm) and small star is 1 1/4" 30mm) x 3/8" deep. Instructions& tips sheet included with a link to pdf resin jewelry& project books. These molds can also be used with chocolate. Fondant, or polymer clay as a push mold. Photos are tips& ideas. Made in USA. Photo sample idea by TheFunkyJunky& Lunaricsales and are not included. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't ... morescrub to clean, or wipe dry, air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Orders are usually shipped the same or next day of confirmed payment. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Mold Round Domes Flat Top 25mm 1" Epoxy Jewelry Pendant Mould SECONDS
Round Flat 6 Count Jewelry Resin Mold with Flaw NOTE: Mold has a tiny raised black speck in one the circles. See photo. Extra finishing may be required or just use the other 5 count. The price has been reduced because the surface flaws. Round Shapes 6 count with flat top and rounded edges. Size is 1" 25mm) x 3/8" Holds 3/4 oz resin. Perfect size for peppermint candy jewelry. Snug fit. Instructions& tips sheet included with a link to pdf resin jewelry& project books. These molds can also be used with chocolate. Fondant, or polymer clay as a push mold. Photos are sample designs. Made in USA. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry, air dry only. Any questions. Please email. Policies: Check-out after your shopping ... moreis finished or add to Cart. No need to pay one-at-a-time. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Resin Mold Unicorn 7.5" 19 cm Epoxy Fondant Chocolate Horse Fantasy SECONDS
Unicorn Resin Epoxy Mold NOTE: Molds have a black speck in the casting surface. See photo. Appears to be smooth inside but extra finishing may be required. The price has been reduced because the flaw. Size is 7.5" x 4.5" x 7/8" 188x108x18mm) at deepest point. Holds 3.5 oz. These molds can also be used with chocolate& fondant. Instructions& tips sheet included with a link to pdf resin project books. Photos are tips& ideas. Mold release/conditioner is recommended for longer mold life but not required. Made in USA. Pink unicorn sample by SmilesFromMe and is not included. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items get ... moreFREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Chunky Epoxy resin bangle Hand Carved.. Awesome My Way Designs Collection
Inside diameter 2 9/16 inches.These are part of the My Way Designs Collection. This is hand carved Lucite. I cant always find the designs I am looking for so we have started carving them. Thank you for viewing, please check out our large variety of colors and styles.Payments are due within 3 day, we always welcome combined shipping. As with all pre-owned jewelry, may show some normal signs of wear, and sold as is.IF bidding for more than 1 item PLEASE DO NOT PAY UNTIL you are done bidding on all items.If over 3 days email me so that I know you are actively bidding on other items. Please request an invoice when done, I will combine shipping in any 7 day period.
OPTICON Resin No.224 FRACTURE SEALER Lapidary Epoxy w/ Hardener & Directions
OPTICON RESIN No. 224 LAPIDARY FRACTURE SEALER 8 fl. oz. Opticon Epoxy Resin& 1 fl. oz Opticon Hardener w/ Box& Directions. Only ever used a small amount- guestimate resin to be over 4/5ths full. Only used 16 drops of hardener. Everything is fresh& ready for you to use. This clear. Easy-to-use sealer is the standard for sealing stone fractures. Repairs large and small fractures in lapidary stones and slabs. Highly effective in penetrating surfaces. Opticon Fracture Sealer is a special resin formulated to seal fractures in all kinds of gemstone material. Slabs, cabs, preforms, etc. This is a clear sealer and in many cases the fracture will completely disappear. Can be heated to create a highly penetrating fracture sealer to help strengthen the stone and help eliminate reflections. Comes in an 8oz. bottle. FEATURES: Highly effective ... morein penetrating surfaces. The mineral content of some fractures will not permit an invisible seal.8-oz. sealer with hardener. General cure time is 3-5 days when cured under a 60watt light bulb. The mineral content of some fractures will not permit an invisible seal. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Cast Aluminum Mixing Propeller 11" Resin, Epoxy, Rubber, Urethane, silicone 11.5
Cast Aluminum Mixing Propeller 11.5"
STUNNING Mermaid on the Beach Wall Art Gloss Finish Epoxy Resin 11" X 8"
Gorgeous colors. Perfect for Mermaid Collectors. Smoke free home. No
Epoxy Resin or Polyurethane Two-Part Proportioner and Mixer.
This proportioner and mixer offers a straightforward. Accurate and mess-free way to both measure and mix two components(Part A and Part B) of epoxy resin or polyurethane directly from drums or pails. Practically new, it is made with the highest quality materials by the nation’s leading manufacturer of proportioners and mixers, Phoenix Equipment Company. Details about this model, the“Polaris 2-Component Mini-Proportioner, Model Number PPS-4400” can be found on their website here: http:www.phoenixequipment. com/resinspraysystems/ proportioner2component.html) We bought it new in 2011 and have used it only a few times. It is air driven(no electricity is required) and has an internal-mix gun(PSG-5102) to which a static mixing tube is attached. The unit is such that any ratio of Part A to Part B within the range of 1:1 to 1:5 can be set by adjusting ... morethe hand crank. The fluid pumps are all stainless steel with triple upper seals. A quick-pin disassembly provides for rapid pump rebuild or replacement. Included is a Fluid Transfer Pump(also air driven) Which is helpful for pre-pumping especially viscous resin from a drum. Also included are fittings to attach into the bung opening of a standard 55 gallon drum or 5 gallon pail. Two static mixing tubes, and spare parts kits with pump re-build kits, along with the manual, are included. Online manuals are also available here: com/systemmanuals.html. In addition. The kind folks at Phoenix Equipment are available to answer any questions and are an excellent resource for additional parts/accessories. It has an air controlled switch box and includes an accessory resin level sensor input, which can be set to keep a container of mixed material, such as a resin bath, at a certain level. We used the unit to proportion and mix epoxy resin, but it similarly can be used for mixing two-part polyurethane material. The unit was tested on October 6, 2014 at which time all the pumps, solvent tank and hoses were thoroughly flushed and emptied. Shipping is set up for"local pick u
Volkswagen VW Wolf Stainless Steel Pin With Epoxy Resin Blue
The description of this item has been automatically translated. If you have any questions. Please feel free to contact us. ^°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°^ Historical badge. Lapel pin, brooch, pin, Lapel button. Historical badge. Button, has pin, lapel pin, sign, stick pin, tie pin. L'historique bouttoniere. Épingle, insigne, pin, pin's, ^°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°^ ... moreVolkswagen VW Wolf Pin Stainless steel with epoxy resin blue Height/ width: ~ 11mm x 36mm Condition: very good ^°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°^ i INTEREST on other pins. Brooches, pins the Volkswagen Group? Then click here: Audi Seat Skoda Bentley Bugatti La
48 Resin Epoxy Molds For Jewelry Casting And Crafts
Molds for resin and epoxy jewelry and crafts. Comes with three bottles of catalyst. Only 4-5 molds were used. The rest are new, many shapes and sizes. Average price paid per mold is $4. There are 6 of every mold except the rectangles and cancer awareness ribbon mold there are 3 of each of those. A total of 48 molds!
Resin Mold Round Cabochon Dome 20mm 3/4" 25 count Epoxy Jewelry Mould SECONDS
Round Domed Cabochon 3/4" x 3/8" deep 25 count Mold NOTE: Mold has two small melted areas on top of the mold. See photos. This should not affect the castings. The price has been reduced because the surface flaw. 20mm x 10mm deep. Instructions& tips sheet included with a link to pdf resin jewelry books. Two halves do not make a full circle. See last photo of 2 molds stacked. These molds can also be used with chocolate. Fondant, or polymer clay as a push mold. Photos are tips& ideas. Made in USA. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry, air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Orders are usually shipped the same ... moreor next day of confirmed payment. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items(expect airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
Vintage Vacuum Chamber ( de-gas / epoxy resin encapsulation ) 10 x 9 x 8
Warlock Systems. Late 60's or early 70's. Very good shape, The door and walls had the excess splatter scraped, still a thin layer of residue everywhere inside, very good door fit seats n seals nice, door seals would likely need to be replaced) everything seems to work, including that little wafer of a heating element, smokin hot in a few seconds, i didn't check the vacuum gauge, power cord was damaged, everything else looks normal wear, was taken care of, and she looking for good home.No serial or model number plate. This unit could be upgraded to suit your needs or used as is? Good Lookin Part.
Resin Mold Round Flat Base 3.5" 88mm Coaster Embed Items Epoxy 60g SECONDS
Round Base 3.5" Resin Mold with Flaw NOTE: Mold has a 3mm long mark in the casting surface. See photo. This may affect the castings and finishing may be required. The price has been reduced because the flaw. Top surface is 3.5" 88mm) x 3/8" 9mm) deep Base is 3.75" 97mm) so sides have a taper. Holds 2 oz resin. Use as drink coaster. Display base, candle base, paper weight. Embed fun items. Photo shows fit for a glass if used as a coaster(glass not included) This is not a bangle mold. Mold is made of self-releasing. Re-usable PolyEthylene. For use with any resin epoxy or polyester casting resin. General instructions included. Made in USA. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry; air dry only. Any questions. ... morePlease email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14b46992148-0x112-
Resin Mold Round Dome Disk 4" 10 cm Epoxy Paperweight Embed Fun Items SECONDS
Round Domed 4" Disk Embedment Paperweight Resin Mold with Flaw NOTE: Mold has a black speck in the top surface of the casting area. See photo. This may require some extra finishing. The price has been reduced because the surface flaw. Size is 4" 10cm) x 1" 25mm) tall. 5/8" sides with flat sides and a slight domed top. Holds 5 oz resin Embed fun items or collectables. Mold is made of self-releasing. Re-usable polypropylene. For use with any resin epoxy or polyester casting resin. General instructions& tips sheet included. Mold release/conditioner is recommended for longer mold life but not required. Made in USA. Plastic molds are easily scratched. So don't scrub to clean or wipe dry, air dry only. The clearest castings are created with purchased molds made from cloudy-plastic LDPE(Low Density PolyEthylene) Sample ... moreidea fishbowl by DeeRaaArts using a similar mold. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
epoxy resin HIGH TEMPTATURE
It's good stuff I just need it for a small heat resistant intake. And do not need the rest. I barely used any of this stuff. So plenty left over. Posted with
Tara Baden Original Fine Art Epoxy Resin Painting Red Black White Modern Gallery
Image by Prev Stop Play Next SIZE: 24 X 30 X 1.5 INCH GALLERY WRAP CANVAS"An artist is not paid for his labor but for his vision. Quote by James Whistler- This painting was created with oil paints. Inks, and epoxy resin on canvas. I paint objects as I think them. Not as I see them. Quote by Pablo Picasso- PROFESSIONAL QUALITY GALLERY CANVAS Original Abstract Painting by Internationally Selling Artist Tara Baden www.tarabaden.com Backed with Hanging Wire. Ready to hang. Certificate of Authenticity Included. This painting has been signed and stamped by the artist on the FRONT and back of painting. Each and every painting is 100% original. FREE SHIPPING TO USA WILL NOT TO SHIP TO PO BOX will ship within one business day Professional packaging. Insurance and tracking number provided. Money Back Guarantee. Reputable Internationally Collected ... moreArtist Bid With Confidence. Recent feedback: I have purchased many art works. This one is a masterpiece. outstanding painting. a real masterpeice. thank you so much.Frank" Best Seller on Ebay! Her paintings are simply incredible. Thank you so much! Picasso who? It's the 21st century. It's all about Tara now. A++++" A woman who will no doubt become famous in the near future. A++++" Not quite like the picture- Thousand times better! This is an amazing artist! View My Other Items For Sale Tara Baden is an internationally collected artist most well known for her originality and wide range of artworks. Her popularity has grown quickly as her un ique and diverse artistic talents continue to grow. She works with many styles, materials. And is consistently evolving as an artist. Her works have been shown at galleries and purchased throughout the country. The art of Tara Baden has been described as a visual celebration to the eye and min d. WORDS FROM THE ARTIST"I am in spired by surreal and abstract art. The process of unique creation. The fre edom of havin g an imagination and the ability to paint it is what drives me as an artist. Tara Baden- Ev ery Tara
ALESSI (EPOXY RESIN BAKE COLOURED STEEL) BOWL - MADE IN ITALY ***EUC***
VERY NICE MODERN ART DECO STYLE BOWL. INDUSTRIAL LOOKING. I THINK IT IS NAMED"MAYA" MEASURES: 10" DIAMETER x ALMOST 5" HIGH. SEE PHOTOS& LABEL FOR FULL INFO. S&H& TRACKING INCLUDED IN PRICE- EXTRA OUT OF U.S.
3D OCEAN CUBE Abstract Sculpture in Epoxy Resin 6 inch square BEACH THEME ARTIST
An amazing abstract resin sculpture. Created a couple years ago by me. The artist. A six inch square that is 1 7/8 inches wide. I think it weighs a couple pounds. I am going to find my shipping scale any day now.LOL A substantial piece in professional grade countertop epoxy ultra-clear resin. Basically brand new. But I sell all my work as slightly used because hand-cast resin has natural imperfections. This piece is abstract. Meaning there are multiple layers that you look down through and into the bottom of the piece, where there are rocks. The embeds nearer to the top are shells and a crab claw. Its just serene and calming, a very ZEN and feng shui friendly piece of art. Also glossy, as the resin I used is high-gloss. A smooth piece, nothing sticking out of the resin. Bottom most layer is shell sand. This piece is very NEAT and organized ... moreand three dimensional when viewed from the top. And is a bit messy and cool when viewed from the unfinished yet very clear sides. Resin is a crystalline structure and throws the light around in amazing ways. One of my favorite personal pieces. I hope you enjoy it also. Unfinished but CLEAR(not frosted) sides and hand-sanded top edge. You can see the casting layers. The top is very clear. No major scratches or quality issues. A very nice piece of new age art. Contains all the energy of the Pacific ocean. Embedment is oceanic and beach like in theme. A real crab claw, snail and limpet shells and ocean rocks. All are no-kill beach collections. All are trapped under successive layers of resin. This piece does contain bubbles and imperfections that can only be seen from the SIDE. When viewed from the top this piece is very organized. I almost painted the sides but ended up leaving it because everybody else liked it so well that I grew also over time to enjoy the irony of the organization and disorganization uniting into a great finished piece. Plus. The clear sides then allow a lot more light transmission. Ultra hard piece. Cast in multiple layers in multiple sessions. This piec
10 inch ROUND MOSS EMBEDDED IN RESIN AMAZING SCULPTURE TRIVET ART HANDCAST EPOXY
PACIFIC COAST LICHENS(MOSS) TRAPPED IN EPOXY RESIN. A BEAUTIFUL PIECE OF ART AND DECORATION FOR YOUR HOME. Brand new cast. But has cured out for a few months. ARTISAN WORK! I sell all my art as a'used' item. Because hand cast resin has natural imperfections and then all my customers are so very happy when they get the item and see it is basically NEW. Epoxy resin food-safe countertop grade resin sculpture or trivet with absolutely amazing embedment work of Pacific coast lichens trapped in the clear resin. Very few bubbles and imperfections. Amazing work for hand cast(non-injection molded) resin. Weighs about five pounds. Circular shape. Exactly 10 inches across and 1.25 inches thick. Would look nice on top of a 10 inch Lazy Susan style rotating base. This is a trivet and the moss is totally trapped under a layer of 1/4 inch or more ... moreresin, so the piece is glossy and smooth. Designed to capture the qi or energy of the forest in winter, when all the moss is in bloom. Oregon lichens, collected after a windstorm and dried before addition as an embedment. PROFESSIONAL. ARTISAN WORK. My trivets are basically hunks of countertop, with custom designs of natural objects artfully placed inside. This piece is very detailed, I spend HOURS arranging the moss layers and there is SAND in the back of the cast so you can't see any of the messy parts of the moss(back side) its a nice piece of art. If you like this piece check out my other listings in various sizes and price ranges! I made this piece myself. With great love and care, leaving the edge frosted but the leading(top) edge has been hand sanded. CAST IN FIVE LAYERS. It took a lot of work to make this beauty! And she turned out great. I hope you enjoy this piece of art as much as I have enjoyed creating it. I ONLY ACCEPT PAYPAL. NO RETURNS Care for your resin like you would expensive countertop. No extreme heat, prevent abrasive cleaners and actions and store flat, out of direct sunlight for endurance. Cleaning of food-safe epoxy resin: cold water. Soap and a so
SOVIET AF WEAPONS Set 1 airmodel FRANK-MODELLBAU Epoxy - Resin - Kit 1:72 Scale
SOVIET AF WEAPONS Set 1. Airmodel FRANK-MODELLBAU. Epoxy- Resin- Kit. 1:72 Scale Airmodel Model AM- 2505. NEW UNASSEMBLED CONDITION. OPEN but parts inventory inspected and believed to be complete. if I did miss something I will adjust or accept return if you pay shipping) Box with aging discoloration in good condition with only minor if any flaws. I have no idea what should be in this kit. Bottom bag is sealed. Top bag is open& assumed incomplete. Comes from a collection of 400 model car& plane kits of a former. Model club member& avid builder. I checked again when photographed. I will combine shipping for multiple models. Will ship to Canada at actual cost(wait for invoice)
2x Pairs SealRite epoxy AB glue metal plastic surface adhesive(Resin+Hardener)
Cheaper than your local supermarket! Save time and gas. Let USPS deliver to you. To save your shipping cost. It will be mailed with a untracked envelope. Select"USPS First Class" if you want tracking.
Resin Mold Ashtray 8" 21cm Round Embed Fun Items Epoxy Decor Molds SECONDS
Ashtray Resin Epoxy Mold with Flaw NOTE: Mold has one embedded speck in the casting area. See photos. Extra finishing may be required. The price has been reduced because the surface flaws. Ashtray mold size is 8.5" 21.5 cm) x 1 3/8" 35mm) deepest point, center circle is 4 1/8" 10cm) Holds 29 oz resin. Ashtray is about the size of a dinner plate. Hand& quarter are for size reference. Cast in layers or mold will melt from the heat Embed interesting items for decorate with candy. Glitter, toys, metal, insects, your great ideas. Instructions& tips sheet included with a link to pdf resin project books. For ashes only. Lit cigarettes will burn resin. Photos are tips& ideas. Photo idea samples by TheFunkyJunky& Lunaricsales and are not included. Made in USA Mold release/conditioner is recommended for longer mold life ... morebut not required. Plastic molds are easily scratched. So don't scrub to clean, or wipe dry, air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional items(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.
"Activate the Stripe Machine" Original Acrylic & Epoxy Resin Signed Johnny Botts
Activate the Stripe Machine" Original Acrylic& Epoxy Resin Signed Johnny Botts“Every creation starts somewhere with light. In this piece. My red robot harnesses the power of light to create vibrating stripes bounding with energy. Johnny Botts. Activate the Stripe Machine" Original Acrylic& Epoxy Resin Signed Johnny Botts on cradled wood. Hand signed by the artist in the lower left side. Activate the Stripe Machine" Original Acrylic& Epoxy Resin Signed Johnny Botts was painted in 2014. Product Specifications: Activate the Stripe Machine" Original Acrylic& Epoxy Resin Signed Johnny Botts- Medium: Acrylic. Aerosol Paint and Epoxy Resin on Cradled Wood Panel. Artwork size: 16” x 16” x 1 3/4” Framed: No. Total product weight: 4 lbs. Certificate of authenticity: Yes. Created in: 2014 Artist’s studio in California. ... morePackage Quantity: 1. Johnny Botts: When you see the artwork of Johnny Botts. You’re invited to explore his playful world of cartoon robots. At a young age Johnny made a conscious choice to maintain a positive outlook on life, and it shows in his work. He creates art that at a glance may make you smile, yet on reflection may hold deeper meaning. Johnny’s formal education is in engineering and business. With his BS and MBA. He worked in Silicon Valley designing things for space—parts for satellites and rockets. A Rocket Scientist! well, some people called him that anyway… Now he’s left that behind to pursue art full time, and he’s been busier than ever, painting his robots in space. Johnny is a self-taught artist and has evolved from painting realistic scenes of toys to painting robots. Art bloggers Hip Monsters wrote: He makes portraits of robots that are more sentimental and lovable than most portraits of children. The robots have a genuine innocence about them that is enduring. Facebook commissioned Johnny to paint large-scale murals at their Menlo Park headquarters. He was given free reign in their sales and marketing building. Where he painted 5 foot tall robots, 20 foot
"Double Robot" Original Acrylic Epoxy Resin on Cradled Wood Signed Johnny Botts
Double Robot" Original Acrylic Epoxy Resin on Cradled Wood Hand Signed By Johnny Botts The artist states about"Double Robot" Original Acrylic Epoxy Resin on Cradled Wood: What makes a robot a robot rather than an autonomous being? Is it that someone else is in control? Most of my robots have seemingly organic elements. So it is up to the viewer to decide what is what, and who is who. Johnny Botts. Double Robot" Original Acrylic Epoxy Resin on Cradled Wood is a one and only piece. Painted in 2014. This painting is only available at Costco.com. Product Specifications of"Double Robot" Original Acrylic Epoxy Resin on Cradled Wood: Medium: Acrylic. Aerosol Paint and Epoxy Resin on Cradled Wood Panel. Artwork size: 16” x 16” x 1 3/4” Framed: No. Total product weight: 4 lbs. Certificate of authenticity: Yes. Created ... morein: 2014 Artist’s studio in California. Package Quantity: 1. Johnny Botts: When you see the artwork of Johnny Botts. You’re invited to explore his playful world of cartoon robots. At a young age Johnny made a conscious choice to maintain a positive outlook on life, and it shows in his work. He creates art that at a glance may make you smile, yet on reflection may hold deeper meaning. Johnny’s formal education is in engineering and business. With his BS and MBA. He worked in Silicon Valley designing things for space—parts for satellites and rockets. A Rocket Scientist! well, some people called him that anyway… Now he’s left that behind to pursue art full time, and he’s been busier than ever, painting his robots in space. Johnny is a self-taught artist and has evolved from painting realistic scenes of toys to painting robots. Art bloggers Hip Monsters wrote: He makes portraits of robots that are more sentimental and lovable than most portraits of children. The robots have a genuine innocence about them that is enduring. Facebook commissioned Johnny to paint large-scale murals at their Menlo Park headquarters. He was given free reign in their sales and marketing building. Where he
Resin Molds Rectangles 32 x 20mm Epoxy Jewelry Rectangle Pendant SECONDS
Resin Rectangle 6 Count Jewelry Molds NOTE: Molds have slightly melted deformity in two corners of each space. See photo. This may affect the castings. The price has been reduced because the flaws. Size is 1 1/4" x 3/4" 32 x 20mm) x 3/8" Instructions& tips sheet included with a link to pdf resin jewelry& project books. Photos are tips& ideas. Made in USA. Pendant ideas by Lunaricsales on etsy. Samples not included. Mold release/conditioner is recommended for longer mold life but not required. Plastic molds are easily scratched. So don't scrub to clean or wipe dry; air dry only. Any questions. Please email. Policies: Check-out after your shopping is finished or add to Cart. No need to pay one-at-a-time. Returns accepted within 60 business days in original condition. I welcome international buyers! All additional ... moreitems(except airbrush) get FREE shipping! Shipping will be based on the largest item. Wait for or request a combined invoice. Shipping rates can be found on the Shipping and Payments tab above. Locate your country by using the pull-down box. Custom forms will be marked sales price. Not as a gift. Import duties, taxes, and charges are not included in the item price or shipping cost. Most international orders will arrive within one to two weeks. If it is delayed due to customs. It can take 30 to 45 days to arrive. Recycling/Go Green! I do my best to reuse& right-size boxes. Reuse packing peanuts& bubblewrap, cardboard, computer paper. Now using biodegradable bubblewrap.