|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: New Location: Glendale, United States Includes:Floating Head on Z Axis. Just attach your plasma cutter and computer screen. X,Y,Z,and A axis CarriagesGantry with Gear Rack. Ball and screw ... moreZ axis. Cut area = 4' x 8’ Table foot print is 5’ x 10’.
Buy It Now
$44.00 Shipping Condition: Used Location: Amityville, United States Weighs 16 lb.
3d 4h 55m 23s 0 bids
$1950.00 Now
$150.00 Shipping Condition: New – Open box Location: Richardson, United States The item is new was used once to demo and we kept it as a back up incase our CNC table went down. If any inquiries arise, don't hesitate to ask.
Buy It Now
Condition: Used Location: Monticello, United States Plasma cutter and Machine torch. Swift Cut CNC Plasma Table. I have cut 3/8" plate with this machine. Worked well. I used this until I bought a bigger ... moretable.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. VEVOR Tilting Milling Table Tilting Angle Milling Machine Adjustable Plate. VEVOR 6" Rotary Table Horizontal Vertical Dividing Plates ... morefor Milling Machine. VEVOR 2.2KW CNC Water Cooled Spindle Motor ER20 VFD Clamp Pump Pipe Collet 110V.
Buy It Now
Free Shipping Condition: New Location: Columbus, United States The gantry is designed to operate on 2x4 tubing. (14 gauge). This assures strong support and longevity. Y Axis: The Y axis (running front to back) has ... morecarriages much deeper than many standard carriages.
$18.01 Shipping Condition: Used Location: Portland, United States Isel Gantry III Table, Model 067, Table 53 x 39, Travel 33 x31. 3 ft.height. Consistently serviced every 100 hrs. Parts always available. The softwaresystem ... morecan easily be updated to Windows 10 or 11.
Buy It Now
$6.16 Shipping Condition: New Location: Henderson, United States CNC Plasma table fluid mix. Makes 200 gallons of fluid. Directions: Mix one spoon for every 5 gallons of clean freshwater. For optimal setup use a 40 ... moregallon clean trash can and a circulation pump attached to a 8 foot length of hose and finger clamp.
$67.50 Shipping Condition: Used Location: Magnolia, United States I am located in Granbury. Machine works great, used this week.
Buy It Now
Free Shipping Condition: New Location: Crystal Brook, Australia CNC PLASMA TABLE PLANS. Build your own CNC plasma tablewith easy to follow comprehensive Scaled Drawings at a fraction of the cost of a bought machine?. ... moreAs the builder of this machine you will understand how it works and take pride in the completed project.
Buy It Now
Free Shipping Condition: New Location: Pottstown, United States The Eastwood Versa-Cut 4' X 4' CNC PLASMA TABLE is the perfect way to get the features of a professional CNC Plasma Table at a hobbyist price. The Eastwood ... moreVersa-Cut 40 CNC Plasma Cutter was specifically designed to connect directly to, and work flawlessly with this Plasma Table.
$3000.00 Shipping Condition: New Location: Houston, United States Fast Cut Icon Elite Series CNC Plasma Cutting Table General Info: Stock# JG-141005 Machine Name: Fast Cut Icon Elite Series CNC Plasma Cutting Table Condition: ... moreUsed. Good Brand: Fast Cut CNC Model: Icon Elite Series Year: 2010 Location: GA Specifications: Icon Elite Series CNC Plasma has a 5x10' table with a 3" total working envelope on the z axis. The machine is equipped with 570oz-in hybrid step motors and a dual drive linear guide system. The drive system runs on helical rack and pinions on the x and y with a enclosed ball screw on the z. The max cut speed is 400 ipm with a rapid traverse speed of 500 ipm. The Icon Elite Series CNC Plasma utilizes a A120 Thermal Dynamics Cutmaster plasma cutter. The cutter has a cutting capacity up to 3/4" The setup also comes with a Ingersoll Rand D25IN air dryer. The Icon Elite Series CNC Plasma also includes the controller which has TurboCAD. Sheet CAM and Mach III CAD/CAM software included. Additional Info: The Plasma Table is currently under power and can be tested. Seller Contact Information: Jamie Gose 404-630-3657 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week.
Buy It Now
Free Shipping Condition: Used Location: Putnam, United States eBay Store Search Bridgeport Milling Horizontal and Vertical 12” Rotary Table. HV-12- NEW Brand: Vertex Model: HV-12 Condition: NEW Country of origin: ... moreTAIWAN This is a vertical& horizontal rotary table. It can be placed either horizontal or vertical on any milling table, it’s perfect for any serious machine job, robust, precision and tight movements, top quality that last for years. These tables are made of high density MEEHANITE cast iron. Heidenhain electronic equipments are used to inspect the angle of the table and assure the excellent quality of the table as well as the durableness. Worm is hardened and grounded. The ratio is of 90:1, the work table is graduated a full 360 degrees so that one turn of the handle moves the table through 4 degrees. Micro collar is graduated in steps of 1’ min. Vernier scale makes settings down to 10 seconds possible. Very popular for their excellent performance. Practical design and affordable cost. Widely used for circular cutting work, angle setting, boring& spot facing. Indexing accuracy of direct indexing mechanism. Maximum cumulative spacing error of 1’min. Horizontal capacity of 264 lbs. 120 kgs) vertical capacity of 132 lbs, 60 kgs) Center sleeve. MT-4. A lot of accessories can be found for these tables. We offer dividing plates, tailstocks and chucks of different dimensions. Don’t forget to visit our store! We carry a complete line of products for the metal mechanic enthusiast. If you don’t see what you need, we find it! Over 50 years of combined experience on machining and metal mechanic machinery, from manual machines to CNC, combined with the best prices on the web, you can’t miss! Note: This item is over 150 Lb. Please contact us through eBay Messaging Service to calculate freight. PowerTool4Less operates from Monday through Friday. 9 am to 5 pm EST. We accept only PayPal payments from confirmed PayPal addresses; through PayPal you can use Visa. MasterCard, American Express, Discover and Debit. In order to insure the security of all parties.
Buy It Now
Free Shipping Condition: New Location: China Newly upgrade, no consumables. High-quality springs and knives, not easy to deform.
Buy It Now
$4.47 Shipping Condition: New Location: Johns Island, United States It uses the IPT-40 head, which is a blow-back start, non-high frequency start, similar to what Hypertherm has done for many years. Stay away from high-frequency ... morestart if you are building a CNC plasma table, because it causes electrical interference that can crash the computer running the CNC.
Buy It Now
$1500.00 Shipping Condition: New Location: Las Vegas, United States The STV CNC® SparX™ Plasma Table Series incorporates high end machine features and capabilities, in a smaller package. Using our high accuracy stepper ... moremotors for speed, control and smooth operation and combining it with ground linear bearings and guide rails results in consistency and speed that is unrivaled in the industry. Additionally, our tables are built tough and designed to easily handle half-inch steel plates (but they can handle more). Made in the USA. Our SparX™ Plasma Table is designed for businesses rooted in auto-repair, industrial manufacturing, agriculture, architecture, and a host of other industries which can all benefit from the business improvements an STV CNC® branded CNC plasma cutting table can bring.
Buy It Now
Condition: Used Location: Stone Mountain, United States Power Source: Hypertherm Powermax 85 Sync. Hypertherm Powermax 85 Sync, Scribe Tool, Spare Parts. 3D Printers Air Compressors Air Cooling & Heating Equip. ... moreBenders Boring Mills Broaches Chemical & Processing Equip.
Buy It Now
Free Shipping Condition: Brand New Location: China Keyboard: PCB keyboard. divider by 7 pins socket, links with lifting motor by 5 pins socket. original height before the perforation delay is finished. ... moreThis function is an approximate dynamic perforation function.
Buy It Now
$1500.00 Shipping Condition: New Location: Las Vegas, United States The STV CNC® SparX™ Plasma Table Series incorporates high end machine features and capabilities, in a smaller package. Using our high accuracy stepper ... moremotors for speed, control and smooth operation and combining it with ground linear bearings and guide rails results in consistency and speed that is unrivaled in the industry. Additionally, our tables are built tough and designed to easily handle half-inch steel plates (but they can handle more). Made in the USA. Our SparX™ Plasma Table is designed for businesses rooted in auto-repair, industrial manufacturing, agriculture, architecture, and a host of other industries which can all benefit from the business improvements an STV CNC® branded CNC plasma cutting table can bring.
Buy It Now
Condition: Used Location: Stone Mountain, United States 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. CNC Vertical Machining Centers. CNC ... moreLathes. CNC Plasmas. Kinetic K5200XMC 10' x 100' CNC Plasma w/ Oxy & Drill (2018).
Buy It Now
$9.85 Shipping Condition: New Location: Groveland, United States Runs on the Passive setting in PathPilotThis is an aftermarket generic tool setter. It uses the passive probe setting on pathpilot. It comes 100% tested ... moreand with the appropriate plug and hardware to mount it to the table. I regularly see .0002” length repeatability. Using the Tormach tool measuring programs.PLUG AND PLAY. Includes Anodized black mount block adapter, t nut and bolt, and 2 bolts to hold it down. Latest version of path pilot uses a G37 and really takes advantage of this device.
Buy It Now
Free Shipping Condition: New Location: Las Vegas, United States The STV CNC® SparX™ Plasma Table Series incorporates high end machine features and capabilities, in a smaller package. Using our high accuracy stepper ... moremotors for speed, control and smooth operation and combining it with ground linear bearings and guide rails results in consistency and speed that is unrivaled in the industry. Additionally, our tables are built tough and designed to easily handle half-inch steel plates (but they can handle more). Made in the USA. The Hypertherm Powermax45 XP Machine System with a great cut capacity, fast cut speeds and automatic gas adjustment is included in this bundle.
Buy It Now
Condition: Used Location: Stone Mountain, United States 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. CNC Vertical Machining Centers. CNC ... moreLathes. CNC Plasmas. Komatsu Rasor KCR-0951 6' x 13' CNC Plasma Cutter.
Buy It Now
$1200.00 Shipping Condition: New Location: Las Vegas, United States The STV CNC® SparX™ Plasma Table Series incorporates high end machine features and capabilities, in a smaller package. Using our high accuracy stepper ... moremotors for speed, control and smooth operation and combining it with ground linear bearings and guide rails results in consistency and speed that is unrivaled in the industry. Additionally, our tables are built tough and designed to easily handle half-inch steel plates (but they can handle more). Made in the USA. Our SparX™ Plasma Table is designed for businesses rooted in auto-repair, industrial manufacturing, agriculture, architecture, and a host of other industries which can all benefit from the business improvements an STV CNC® branded CNC plasma cutting table can bring.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Manual Sliding Table SFU1605 Linear Stage Actuator CNC Slide Stroke 100MM＜20kg Features: Material: The whole body is made of aviation aluminum, which ... moreis oxidized and has a beautiful appearance. High precision, exquisite craft, smooth surface. Long life, low coefficient of friction, high versatility. Linear motion, with a small frictional resistance. Linear shaft diameter is 16mm/0.6inch, and the effective stroke is 100mm/3.9inch. Specifications: Max. load: ＜20kg Linear shaft: 16mm(diameter) Motor standard: Applicable to 57 stepper motor Repeat locating standard: ±0.03 Effective stroke: 100mm / 3.9inch Package Included: 1 x Sliding Table.
Buy It Now
Condition: Used Location: Richmond, United States Tannewitz 36" Bandsaw. Works best as a resaw mill, photos show large timbers being resawn. All vises and vise tooling is included. All spare parts are ... moreincluded. The carriage ways must be straight and level for best results.
Buy It Now
Free Shipping Condition: New Location: Pottstown, United States Only plasma cutters with blowback (low frequency) start are permitted. Furthermore this use could invalidate your plasma cutter’s warranty. Reach out ... moreto your plasma cutter’s manufacturer for guidance.
Buy It Now
$1500.00 Shipping Condition: New Location: Las Vegas, United States The STV CNC® SparX™ Plasma Table Series incorporates high end machine features and capabilities, in a smaller package. Using our high accuracy stepper ... moremotors for speed, control and smooth operation and combining it with ground linear bearings and guide rails results in consistency and speed that is unrivaled in the industry. Additionally, our tables are built tough and designed to easily handle half-inch steel plates (but they can handle more). Made in the USA. The Hypertherm Powermax45 XP Machine System with a great cut capacity, fast cut speeds and automatic gas adjustment is included in this bundle.
Buy It Now
Condition: Used Location: Stone Mountain, United States Model: Edgemaster. 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. CNC Vertical Machining ... moreCenters. CNC Lathes. CNC Plasmas. Lincoln Torchmate 4800 4' x 8' CNC Cutting Table with FlexCut 125 Amp Plasma.
Buy It Now
$15.45 Shipping Condition: New Location: East Lansing, United States iPTM-80 CNC Plasma Machine Torch head , works for most brand CNC machine or table. Shipped with USPS Priority Package (2 to 3 business days).Any questions ... moreplease feel free to contact us.This torch works for most CNC machines. Reuse your torch cable, only change torch head when it's wear out.
Buy It Now
$6.00 Shipping Condition: New Location: Middletown, United States This is for Langmuir System with RazorWeld 45 CNC Plasma cutter with Machine Torch ! And Z-Axis Kit. This is NOT the machine its only wire and torch guides ... morethat'll clip in around the tube. Then you clip the torch in and z motor & the limit switch wire.
Buy It Now
$120.63 Shipping Condition: Used Location: Ithaca, United States Kitagawa Tec NARA - surplus to our needs - was connected to Dynapath System 2000 - I prefer local pickup but will pack and shi
Buy It Now
$24.24 Shipping Condition: New – Open box Location: Sandy, United States You are bidding on ONE BOX OF PARTS FOR THE CARBIDE 3D SHAPEOKO 4 CNC ROUTER XXL. This is a lost freight item that we received as you see it ion the photos. ... moreFrom what we understand, these routers are shipped in 2 separate boxes, and this is one of the two. The parts are new, never used in the boxes - but keep reading. We will show everything in the photos that is included. The boxes inside are labeled: HYBRID TABLE, CONTROLLER, DRAG CHAIN, XY ASSEMBLY, ROUTER, AND SWEEPY. Please look at the photos though, as there are a couple of boxes that we aren't sure have what was originally inside them. For example, the box that says router, has a mount for one, and some empty drag chain, but no router.
Buy It Now
Free Shipping Condition: New Location: Columbus, United States PLANS ONLY (DXF Files and Materials List). Z Axis: The Z Axis is designed to accommodate an 80mm spindle or a plasma machine torch. The design is also ... moreinclusive of a floating head. You can retrofit your own Z axis, however this design has been proven very effective with amazing ease of use.
Buy It Now
$400.00 Shipping Condition: Used Location: Hayward, United States Up for sale we have a Brown & Sharpe #1 Cylindrical Grinder in working condition. Whether you're working on a large or small project, this grinder will ... morehelp you achieve the precision and accuracy you need.
Buy It Now
Free Shipping Condition: New – Open box Location: South Jordan, United States Model: Shapeoko s4. Part Number: Shapeoko s4. MPN: Shapeoko s4. Type: PRINTER PARTS.
Buy It Now
Condition: Used Location: Stone Mountain, United States Power Source: Hypertherm XPR 300 X-Definition Plasma System. Year: 2021. 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills ... moreBroaches Chemical & Processing Equip. CNC Vertical Machining Centers.
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Dunkirk, United States This Servo Products type 140 Power Feed, is the perfect addition to your mill. Made in the United States, this high-quality power feed is designed to ... moreimprove the efficiency and accuracy of your milling operations.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: Canada WHAT YOU HAVE HERE IS A Z AXIS LIFTER FOR PLASMA WITH FLOATING AND MAGNETIC BREAKAWAY. ALL PARTS ARE PRECISION CNC MACHINED TO TIGHT TOLERANCES. -MAGNETIC ... moreBREAKAWAY. -Magnetic breakaway will detect the plasma torch.
Buy It Now
Free Shipping Condition: New Location: Monaca, United States This sale includes drawings to make your own CNC gantry. The parts are designed to attach to a piece of square tubing. Common sizes are 2x2, 2x3 and 2x4. ... moreYou will need to know how to weld to complete this project.
Buy It Now
Condition: Used Location: Lincolnshire, United States Tool Clamping Force. 40 Station (Chain Style) Automatic Tool Changer. High Speed Plus Drive Swivel Head (B-Axis). Swivel Vise (C-Axis) rotates to hold ... morebar, then part-off. Has 360 deg. Table Left to Right (V-Axis) runs parallel to X-Axis.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Manual Sliding Table SFU1605 Linear Stage Actuator CNC Slide Stroke 100MM＜20kg Features: Material: The whole body is made of aviation aluminum, which ... moreis oxidized and has a beautiful appearance. High precision, exquisite craft, smooth surface. Long life, low coefficient of friction, high versatility. Linear motion, with a small frictional resistance. Linear shaft diameter is 16mm/0.6inch, and the effective stroke is 100mm/3.9inch. Specifications: Max. load: ＜20kg Linear shaft: 16mm(diameter) Motor standard: Applicable to 57 stepper motor Repeat locating standard: ±0.03 Effective stroke: 100mm / 3.9inch Package Included: 1 x Sliding Table.
Buy It Now
$7.95 Shipping Condition: New Location: Lakeville, United States These straight bars are perfect for getting stuff square on your table. They are nickel plated, so you can weld to them creating your own custom tooling. ... moreCNC Machined and Made in the USA!
Buy It Now
Condition: Used Location: Fullerton, United States C-Axis Table Rotation Positioning Degrees 360. A-Axis Trunnion Tilt Range -125~+10. Work Size 20.47" x 13.77".
Buy It Now
$400.00 Shipping Condition: New Location: Everton, United States Training & diagnosis is done by Mikogo screen share over the internet. This makes buying a plasma cutting table from Eagle Plasma an easy decision. It’s ... morea robust machine with high-end components that are built into a small machine footprint.
Buy It Now
Free Shipping Condition: New Location: Hicksville, United States Tomahawk 625 plasma cutting systems are portable enough to carry to any jobsite. Hook up the compressed air, grab the torch and start cutting right away. ... moreDue to its reliability and portability, this plasma cutter is ideal for onsite maintenance, small construction sites, HVAC and demolition.
Buy It Now
$57.62 Shipping Condition: Used Location: Topeka, United States This is a used like new Lotus LTP5000D 50 amp plasma cutter. This is a very compact portable unit which makes it very nice to use. Included is everything ... moreyou see pictured with the original box as well.
Buy It Now
$1500.00 Shipping Condition: New Location: Las Vegas, United States The STV CNC® SparX™ Plasma Table Series incorporates high end machine features and capabilities, in a smaller package. Using our high accuracy stepper ... moremotors for speed, control and smooth operation and combining it with ground linear bearings and guide rails results in consistency and speed that is unrivaled in the industry. Additionally, our tables are built tough and designed to easily handle half-inch steel plates (but they can handle more). Made in the USA. The Hypertherm Powermax45 XP Machine System with a great cut capacity, fast cut speeds and automatic gas adjustment is included in this bundle.
Buy It Now
Free Shipping Condition: New Location: Houston, United States Our plans will allow you to build a plasma pattern copier.It make exact size duplicates of whatever you can trace. Or follow with the stylus. You can ... morecut out shapes just like a cnc plasma table only on a smaller scale, and without having to program. Cut shilouettes, cut out alphabets, great for metal art. Our plans include a templa t e that can be scaled to make any size plasma duplicator you want. Small or large. At 100% it will give you a cutting area of approximately 8 inches x 24 inches. Videos viewable on our site. Plans-Template& photos are available as a download More Info at Plasma.Fix-Er-Up.Com Have a problem building it. We will help thru our Helpdesk! Powered by The free listing tool. List your items fast and easy and manage your active items. ao5pta.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bisk%3Eao5pta-13e0ff33504-0xfa-
Buy It Now
Condition: Used Location: Louisville, United States > View phone number.
Buy It Now
$17.80 Shipping Condition: New – Open box Location: Dayton, United States SADDLE/TABLE GIB! BRAND NEW REPLACEMENT FOR YOUR BRIDGEPORT MACHINE! THIS IS MAY BE OVERSIZED DIMENSIONS: 19 13/16" L. 1.435" AS WIDEST POINT, ... moreTAPER FROM.545" TO.240" TO END NO GROOVES OR FLAKING FOR OIL BUT MAIN SURFACE IS GROUND THIS IS NOTCHED BUT A NEW NOTCH MAY NEED TO BE CUT FOR FIT WHICH IS NOT UNCOMMON IN FITTING BECAUSE ALL MACHINES WEAR DIFFERENTLY. THERE WILL BE SOME FITTING INVOLVED. ACTUALLY MEANT FOR REBUILDERS, BUT ALSO AVAILABLE FOR THOSE WHO ARE WILLING TO TACKLE THIS JOB. CAN'T ACCEPT A RETURN THAT HAS BEEN ALTERED. THIS WILL SHIP AS WHAT IS IN THE PICTURE AND WILL ACCEPT THIS CONDITION FOR THE RETURN SHIPPING IS ONLY $8.99 COMBINE WITH OTHER PRODUCTS AND SAVE WITH MULTI ITEM PURCHASES. THANKS FOR LOOKING AND DON'T FORGET THE OTHER QUALITY BRIDGEPORT PRODUCTS IN THIS STORE. SUCH AS REPAIR KITS, REPLACEMENT PULLEYS, AND CLOCK SPRINGS. DIDN'T SEE WHAT YOU NEEDED IN THE STORE? WE STOCK 95% OF WHAT YOU NEED FOR YOUR SERIES 1 BRIDGEPORT WITH J HEAD. CALL FOR QUESTIONS! PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email for further information. Shipping and Handling Shipping weight: 4lbs. Buyer pays the shipping& handing charge. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and m
Buy It Now
Free Shipping Condition: New Location: Monroe, United States We have been serving the welding industry for over 25 years. We are an award winning Hypertherm Distributor. THE TORCH DOES NOT INCLUDE THE CONSUMABLES ... more. The Duramax machine torch is designed for use with the Powermax 65, 85 and 105 plasma cutting and gouging systems.
Buy It Now
Condition: For parts or not working Location: Fort Lauderdale, United States Thermal Dynamics 5-0075 SL60 Plasma Cutter Spare Parts Kit Cutmaster 52 or 82 Click an Image to Enlarge TD5-0075 Welcome to the Weldfabulous eBay store! ... moreTo make your purchase as simple and easy as possible. Please refer to the store policies listed below. After winning an item in auction or completing a Buy It Now purchase. You have two check-out options: Check-Out Now! Click the at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later If you do not choose to Check-Out now. You will be notified by eBay via e-mail that you are the winning bidder. There is no need to contact us to arrange payment. We will automatically send you an e-mail within three hours of an auction closing. Our message will contain a link to our simple and secure checkout system, where you will be able to quickly and conveniently pay for your purchase. Payment We accept the following forms of payment. PayPal Visa. MasterCard, American Express, and Discover credit card payments through eBay Checkout Sales Tax Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 For shipment to Minnesota. Wisconsin, and Iowa addresses, we are required by State law to collect sales tax for the appropriate states. Tax rates are as stated below Minnesota: 6.875% Wisconsin: 5.5% Iowa: 7% Normal 0 false false false EN-US X-NONE X-NONE Domestic Shipping Continental United States UPS Ground and USPS Priority Mail are our standard shipping methods within the Continental US. We offer free shipping on all items except cylinders. UPS Ground requires 1 to 6 business days to arrive after leaving our facility and is fully traceable in route. We cannot ship large packages to PO Boxes so please be sure to provide us with a physical shipping address. For specific small. Low value items such as beanies, gloves, jackets, etc. we do offer US Postal Service Priority Mail for shipments within the C
Buy It Now
$50.00 Shipping Condition: Used Location: Ann Arbor, United States Bottom of T-slots and sides could be gone over with a Scotchbrite pad. Condition: Nicely reground top surface on this rare T-slot milling table. "Emco ... moreFB2 Mill". I will provide the pallet and band the item to it.
Buy It Now
Condition: Used Location: Lancaster, United States Speed Low Gear: 182 RPM Max. Speed High Gear: 1230 RPM Facing Head Speeds: Max. Speed Low Gear: 37 RPM Max. Pictures show machine without guarding. Rebuilt ... moreand Retrofit: 2012 We do have the guarding.
Buy It Now
Condition: Used Location: Louisville, United States 15,000 RPM SPINDLE. Taper Cat 40. Power 18 hp. > View phone number. Table-L 16.1". 220/230 ELECTRICS. DATA SERVER. FLOOD COOLANT.
Buy It Now
Condition: Used Location: Stone Mountain, United States 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. CNC Vertical Machining Centers. CNC ... moreLathes. CNC Plasmas. Model: Accu-Kut CNC. Bend-Tech Dragon A400 CNC Tube & Pipe Plasma Cutting Machine (2017).
Buy It Now
Free Shipping Condition: New Location: Chino, United States CNC Router-Machine Rotary Indexer Table Indexing Head 5th Axis 4th Axis 6:1 8:1 Specification: Colour Silver Rack Material Aluminum Alloy Fourth axis ... morereduction ratio 8:1 (57 two phase 4 wire 3A stepper motor) Fifth axis reduction ratio 6:1 (57 two phase 4-wire 3A stepper motor) Center height 98mm Table size 100 * 125mm Size 440 * 150 * 160mm Weight 11kg Features: 1.Not easy to oxidize, not easy to rust 2.High concentricity and high conversion rate. 3.Precise positioning and stable control 4.Wear resistance, long service life Package Included: 1×rotary indexer table.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Chuck type: Standard ER32 collet 3~20mm (Hollow shaft). 11 pcs complete set ER32 collet 11 pcs complete set ER32 collet3mm,4mm,5mm,6mm,8mm,10mm,12mm,14mm,16mm,18mm,20mm. ... moreAxis: 80RPM. Step motor: 57 phase stepper motor (two-phase 4 wire current 3A ).
|
|
|
|
CNC 9.25 Feet X 7.5 Solid Steel I-Bar Table mill/router
Originally built in Brazil. And shipped here. It is a very robust and heavy machine, with rock solid I-Bar iron as it's table surface and a highly solid frame and gantry. The controlling pc uses Mach3. It is a three axis machine. Work area is approximately 60 inches by 63 inches. The outside rectangle footprint of the machine is 111 inches by 90 inches( 9.25 feet by 7.5 feet) The table height is 33 inches. And the total height is 6.5 feet approximately. The computer cabinet is 6 feet high. By 2ft by 2ft. Note in the pictures the solid construction and hefty weight this machine has. It is the type of machine that can be improved/modified as it has a great. Solid structure. Certain photos have a tape measure next to the steel for reference. Buyer must arrange for pickup in Tampa. Florida. We reserve the right to end the auction early.
|
|
|
EMCO F1 CNC MILL MILLING MACHINE TABLE TOP Will ship
EMCO F1-CNC Milling machine only. Does not have controller, tool holder.only what is shown in photos(two collets are included) Was used in high school tech education classes and was in good working condition when it was decommissioned. Comes with the base shown and there is a front cover for the base that is lying underneath and not well seen in the photos. I will ship this to you. However,it will be partially disassembled because it is too top heavy to travel as it is. Some re-assembley will be necessary. Please feel free to email with any questions. You can come pick it up here in Connecticut to save on the freight costs.
|
|
|
Deluxe 8-Direction CNC Sherline Mill Package & 4th Axis Rotary Table!
We are selling our barely-used Deluxe 8-Direction CNC Sherline Mill simply because we no longer need it. It's in like-new condition with original accessories and cutting tools included. PLUS a 4th axis rotary table and computer! We purchased this as a CNC-ready mill with a conversion kit. And installed the motors and handwheels, so it's ready to go. All you have to do is plug the driver box into the computer and install the software of your choice. Included accessories: 1072 1/4" Jacobs Drill Chuck 3013 Step Block Hold-down Set 3020 5/32" Sherline Hex T-Driver 3021 3 pc. Center Drill Set 3052 Fly Cutter w/ Carbide bit 3060 3-pc. Mill Collet Set w/ Drawbolt 3079 3/8" End Mill Holder 3551 Milling vise 5327 Sherline Accessories Shop Guide book 7401 6-pc. 3/8" Shank End Mill Set 8730 4th axis Rotary Table with stepper ... moremotor and motor mount HP desktop computer: Intel Pentium D Dual Core 3.4GHZ; 1GB RAM; 80GB hard drive The below is information from Sherline's website: Rotary Table- Brand New The pre-soldered 5-pin connector on the 135 oz-in. 2 amp stepper motor plugs right in to the connection cables that come with a Sherline CNC system or the 8760 driver box, making it fast and easy to get up and running. Driver Box(8760) Software(8326) The 8760 driver box has output cables for X- Y- Z- and A-axes. It also includes an input cable that connects to the 25-pin parallel(printer) port on your computer. Included with the driver package is a 4 amp power supply and a 2-CD set with the Linux OS and EMC 4-axis software ready to install on your computer if you choose. Minimum requirements for the software include 800 MHz or faster CPU, 256MB RAM, and 25-pin parallel port for connection of external 8760 driver box. Let us know if you have any questions. And happy bidding!
|
|
|
Cincinnati Gilbert CNC Horizontal Boring Mill 4" spindle 4' x 6' Table 48" y-axi
New in 2000. Machine was dissassembled in 2012 inspected. Painted, and reassembled. Currently not under power. Hardened Ways except for the coloum. Turcite and ways are in great shape. 4" spindle 1610 max RPM. 3 Speed W/ Servo Motor. 50 NMTB Taper Power Draw Bar. 200 IPM Rapid Travel. 72" X Axis. 48" Y Axis. 96" W Axis. 29" Z Axis. Table has 1 1/16" T-Slots(6) Table has 3 cross slots 1 1/16" Table has 2 outrigger supports. Teleoscoping Way Covers on Table and Saddle. Central Way Lube System. Hyd. Oil Chiller. AutoCon Dynapath 50 Control. Manual Operation at the Flip of a Switch. Set up to run cnc rotary axis. Machine was taken out of service and replaced with a larger Gilbert in our facility in 2010. Very well maintained machine. Great Machine Overall. Questions are welcome Dan Petry 616 405 3227.
|
|
|
Torchmate 2/3 - CNC Plasma Cutting Table - 4x8
Torchmate 2 Cutting area: 4x8 Plasma Power Supply: Thermal Dynamics Cutmaster 81 Automated cutting torch: SL100 Arc Voltage Height Controller(brand new. Still in box- Torchmate 3 version) Machine to Plasma CNC controller(brand new. Still in box- Torchmate 3 version) Torchmate Driver Software(Torchmate 3 version) on older tower desktop with flat screen Aluminum extruded bolt together frame(used. All welded together for strength with angular reinforcements on corner legs.we found that the bolts were constantly in need to tightening so we welded it solid) 3- 380oz stepper motors(brand new. Mounted but boxes included New slat sheet support brackets(brand new. Never cut on) Machine footprint is about 6 foot by 11 foot Cable carrier system to protect all motor/avhc/drive cables Stock pictures. Machine is disassembled but will be reassembled for ... moreshipment Turn key machine.shows up ready to use all you need to do is add power and air Very nice. Very affordable machine Priced out new today would cost $17.500 new for the torchmate package, the plasma power supply and the auto torch. Can fabricate and include skirts. Or water trays for additional quoted cost if desired
|
|
|
CNC XY XYZ Motion Table / for LATHE / MILL CNC STEPPER MOTORS
Don't like our price? Make us an offer! Item Description: C&C MINI LATHE/MILL or Machining center. Lathe parts, etc. No controllers or other come with item. Only getting just what is pictured. As is. Everything pictured is included. About Shipping This Item: This item. Due to size and weight, needs to be shipped via motor freight. We don't use ebay's freight calculator since we can usually beat their prices by a significant amount. Actual freight charges will depend upon your actual location and shipping situation. Please contact us for an exact shipping charge and if you have a residential or commercial address; and if there is a forklift or loading dock available. These will be needed for an accurate shipping quote. About our Feedback: Please do leave us good feedback on all our categories. Unfortunately. Ebay has made it ... moremore difficult for smaller sellers and so anything less than perfect actually counts against a seller. Please let us know if there is anything we can do to accomodate so you can provide us with top ratings on all our categories! If there are any problems or questions, please do not hesitate to ask! Powered by jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13e057fbb92-0xe2-
|
|
|
CNC Trunnion Table (4th or 5th axis) - 2 Servo Motor w/2 Harmonic Drive Gearhead
Trunnion table(fourth axis) The working area is 15" x 5" T he center of rotation is roughly 2" from the top of the table. The entire table measures 17 1/4" long. And the entire assembly measures 29" long. The rotary motion is done by a Harmonic Drive gear head attached to a 24V Brushed Sanyo Denki Servo Motor. AN OPTIONAL SECOND HARMONIC DRIVE GEAR SE T AND A SECOND MOTOR IS ALSO INCLUDED IF A SYNCHRONOUS MOVEMENT FROM BOTH ENDS IS DESIRED. It has 2 limit switches and 1 home switch. All three are light interrupt switches. It has 3 tapped holes on the bottom of each leg. And can be mounted directly on a tooling plate. The legs are 20" apart from their center. Used in superb condition. A few scuffs here and there but it seems to be barely used. Please no international bidders. I will ship to USA only. S&H $110.00 ... moreUSPS Priority Mail + Tracking(insurance optional extra) I only accept PayPal. All the items are described with the best of my knowledge. Thank you! Happy Bidding! k keywords: Sherline Taig Rotary Table Hass Bridgeport Parker Newport Linear Actuator Motion Control API Controls Devicenet DM-224I-EDN Stepper Motor Driver w/encoder feedback input
|
|
|
MotionMaster 3-Axis CNC Router MB-510 w/ Fagor 8055 Controls - 5' x 10' Table
MotionMaster MB-510 Router Used MotionMaster router in great and fully functional condition. This was used in a R&D facility and was not used in production. Table: 5' x 10' Fagor 8055 controls with handheld control 6 position tool changer with 6 tool holders included 10 HP Elettromeccanica spindle motor: Date: 01/ 01- Part# 9 1 563 3 0717 1732- Type: RS 135.22 HSK F63- S/N: 010596 Please feel free to contact us with any questions. Inspection by appointment in Rochester. NY. Shipping: We have the ability to load the router on your truck. But if packaging is needed, please contact us to make arrangements. This is a very large. Very heavy piece of equipment and may require special handling, packaging and rigging depending on location. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item ... moreprice or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. PLEASE NOTE: Due to the way freightquote.com words their Bills of Lading. We will no longer be allowing any shipments made through them. You can contact us for more details, but please be advised that we will not sign a freightquote.com BOL. We apologize for any inconvenience and we will do everything we can to assist in finding the best freight price we can. All others will be charged according to their location Sales tax of 8% will be charged to New York State residents and business's. We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your acti
|
|
|
Vacuum table CNC CHUCK Engraving or Milling 14" x 19 3/4"
Vacuum table CNC CHUCK Engraving or Milling 14" x 19 3/4" Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge This is a used engraving table with vacuum table. It looks to be in good condition. I have no way to fully test this so I am selling it as is. Please see pictures for best detail description. Will be carefully packed for shipping. Shipping is quoted for lower 48 states. Thank you for looking. We appreciate your business! All items are carefully shipped FedEx or USPS unless otherwise stated in description. Items must be paid for by PayPal within 3 days of end of auction. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak.
|
|
|
TROYKE CNC ROTARY TABLE MODEL DL-6.5-B For HAAS
This is a used Troyke 4th Axis Rotary with chuck and matching tail stock. It is currently wired for HAAS. Lightly used. TROYKE CNC ROTARY TABLE MODEL DL-6.5-B LOT NO. 5195-12 6 1/2' TABLE 1 3/16" HOLE UNIT WEIGHT: 130 LBS. BRAKE METHOD: PNEUMATIC MAX SPEED RANGE 0-22 RPM STANDARD TOTAL GEAR RATIO: 90:1 VERTICAL LOAD CAPACITY 75 LBS. BUYER PAYS THE SHIPPING ANY QUESTIONS CALL 201 652 4350
|
|
|
Precision CNC Rotary Table Stainless Steel Stepping Motor
Precision CNC Rotary Table Stainless Steel Stepping Motor Very well built unit with 5 phase motor with worm gear to drive the table. The top spin extension is removable. This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with USPS Priority Mail. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. GC_gsrx_vers_486(GS 6.5.1(486)
|
|
|
NIKKEN KOSAKUSHO WORKS 5AX CNC ROTARY TABLE 5AX-120
NIKKEN KOSAKUSHO WORKS 5AX CNC ROTARY TABLE 5AX-120 You are purchasing a Nikken Kosakusho Works CNC Rotary Table. Model: 5AX-120 This Rotary Table is in good condition and is fully operational. S/N: 1844 Photos show items included. We can load on your truck at no charge and assist with the delivery. Thank you for looking!
|
|
|
SMW PT160 CNC 4th Axis Rotary Table Chuck/Collet Indexer No Controls Pneumatic
Questions? Call us: 1-877-328-9236. SMW PT160 CNC 4th Axis Rotary Table Chuck/Collet Indexer No Controls Pneumatic. Manufacturer: SMW Model: PT160 Condition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: SMW Condition: Used. Comes in non-original packaging. Item has scuffs and scratches from normal use. Notes: This item was not tested since we do not have the proper resources. NOTE: It does not come equipped with any controls. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) SMW PT160 CNC 4th Axis Rotary Table Indexer, 1) Collet adapter, Specifications: Manufacturer: SMW, Model: PT160, 4th axis, Capabilities: collet or chuck, 1- collet adapter, CNC machining, T-slot table clamping, Pneumatic& control ports, SKU: L43L009 For questions regarding this ... moreitem. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepa
|
|
|
Nikken Swingaway Tailstock for CNC Rotary Table 4th Axis Mill Nice Condition
For Sale is a Nikken Swing Away Tailstock for 4th Axis Rotary Tables. Purchased for a job and used approximately 10 hrs. Model P-210S with 208mm center height adjustable from 200mm to 220mm. Great mechanical condition with some surface blemishes from storage and short time of use. Has the 5 additional centers included. For more info just look online at the Nikken Website. RESERVE PRICE HAS BEEN LOWERED.AGAIN!
|
|
|
9.84" TSUDAKOMA Horizontal CNC Rotary Table (2007)
Preowned 9.84" TSUDAKOMA Horizontal CNC Rotary Table. Model: RB-250R, S/N: 072109(New 2007) Table diameter Center height Center bore diameter Maximum motor speed Maximum table speed Load capacity Load capacity with tailstock Load capacity when table clamped 9.84" 6.3" 2.79" 3.000 R.P.M. 33.3 R.P.M. 330 Lbs. 660 Lbs. 722 Lbs. Equipped with: Dual Disk hydraulic clamping mechanism Air/Hydraulic booster to power the clamping mechanism if the machine tool on which the table is being used does not have a hydraulic source FANUC AC servo motor Connection cables Approximate Weight: 220 Lbs. Approximate Dimensions: 20" L-R x 18" F-B x 15" H Condition: Very Good We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
Rotary Table CNC 12" MMK Tecnara MD 3004
12" MMK Tecnara MD 3004 CNC Rotary Table Specifications Table Diameter: 12.60" Diameter of Hole Thru Center: 4.527" Height of Table in Horizontal Position: 7.87" Overall Height in Vertical Position: 18.74" Gear Ratio: 1/360, Maximum Speed: 5.5 RPM, Minimum Resolution: 001" Degree, Indexing Accuracy: +/ 7.5 Seconds, Table Load. Horizontal Position: 770 Lbs. Item is being sold As Is. Loaded on truck. Buyer is responsible for shipping. If you have any questions please contact Scott Tyler at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
|
9" Nikken 4th and 5th Axis CNC Rotary Table, 1993
Please see info below and photos on a nice 9" Nikken 4th and 5th Axis Rotary Table. It is equipped with Fanuc AC Servo Motors. This table is very rarely seen on the used market and is super expensive to buy new. This table is available immediately. I do have the ability to load this machine on your truck. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at paultrossman@hotmail.com. 9" NIKKEN 4TH AND 5TH AXIS CNC ROTARY TABLE Model: 5AX-230. S/N 5022, New 1993 CATALOGUE SPECIFICATIONS: Working Surface Diameter. 9" Table Diameter. 9" Maximum Workload on Table 0 to 30 Degrees. 220 Lbs. Maximum Workload on Table 30 to 90 Degrees. 220 Lbs. Table Center Height. 9.5" Reduction Ratio Rotating. 180:1. Reduction Ratio Tilting. 360:1. Rotation Speed Rotating. 11.1 RPM. Rotation Speed Tilting. 5.5 ... moreRPM. Minimum Increment Rotating. 001 Deg. Minimum Increment Tilting. 001 Deg. Approximate Dimensions. 30" x 18" Approximate Height. 12" Approximate Weight. 490 LBS. CONDITION: Appears to be in Excellent Condition!
|
|
|
Tsudakoma 12" CNC Rotary Table, RNCM-300R, Hor / Vert., Used, WARRANTY
Title: Tsudakoma 12" Rotary Table Indexer Description: Our Internal Stock# 4-B2-5(3-4-13 dale) You are about to purchase the following item: Catalog# RNCM-300R Serial# 405202 12-1/2" Dia Table Can use table either in Horizontal or Vertical Position. Rotary Table Drive By: Yaskawa Servo Motor Feedback Unit Model# TFUE-05ZC7 There is no Servo Amplifier with Unit Weight of Table as Equipped: 425 Lbs. Skidded weight approx. 450 Lbs. Skid dimensions: 30" x 36" x 12" H. This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you ... morea picture of your specific item. WE SHOULD BE ABLE TO HAVE THIS ITEM SHIPPED IN THE CONTINENTAL USA TO A BUSINESS LOCATION WITH LOADING DOCK/ LIFT TRUCK VIA UPS LTL FREIGHT FOR AROUND $ 155.00. IF YOU WOULD LIKE TO GET AN EXACT RATE TO YOUR DESTINATION FEEL FREE TO CONTACT US AT ANY TIME. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and payed for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immedia
|
|
|
CINCINNATI MILACRON DL-12-B CNC ROTARY TABLE
This Troyke/Cincinnati Table was only used a few times. It is equipped with a Fanuc Servo motor that drives the table. It also has a tailstock to support longer or heavier work. LOT 548 CINCINNATI MILACRON ROTARY TABLE MODEL DL- 12- B LOT NO. 5092- 7 WITH TAILSTOCK MODEL TS-12 Turntable Diameter(MM) 14.62(371) Standard Thru Hole Dia(MM) 12.0(304) Oversize Thru Hole Dia(MM) 1.968(50.0) Maximum Thru Hole Dia(MM) 4.125(104.8) Horizontal Load Capacity(KG) 6.100(154)2 Vertical Load Capacity(KG) 300(136) Faceplate T-Slot Width(MM) 47(12) x 8 Standard Total Gear Ratio 180:1 Alternate Total Gear Ratio 360:1 Max. Speed Range(STD Ratio) 0-10 RPM STD. CONT. Torque LBS-FT(NM) 375(508) Brake Method Pneumatic Brake Torque LBS-FT(NM) 345(468) Programmable Resolution.001 DEG. STD. Total Angular Accuracy 30 sec. STD. Repeatability 10 sec. Opt.H or I) Anglr. ... moreAccuracy +/5 +/3.6 Opt.H or I) Repeatability +/2 +/ 1 Unit Weight lbs. KG) 251(113) Ship Weight lbs. KG) 301(135) Equipped with: Fanuc Servo drive motor Tailstock BUYER PAYS THE SHIPPING IF YOU HAVE ANY QUESTIONS CALL 586-752-0090
|
|
|
Nikken CNC Rotary Table 400 VA
Diameter 15.75 Hole 3" Horizontal and Vertical Model No: CNC 400 VFA Serial NO: 4348 Date 89-7 Motor A06B 0651 B011 DC Ratio 1-90 with cables Weight 600 lbs. Call Jack for details 860-559-8184.
|
|
|
CINCINNATI MIACRON CNC ROTARY TABLE MODEL DL-6-B
LOT 844 CINCINNATI MILACRON CNC ROTARY TABLE MODEL DL-6-B 5150-1 6" TABLE 1 3/16" HOLE YEAR: 1998 KOLMORGAN MOTOR BUYER PAYS THE SHIPPING ANY QUESTIONS CALL 586-752-0090
|
|
|
HAAS HRT310 4TH Axis CNC Servo Rotary Table 12” Platter & 6 T-Slots 60°
HAAS HRT310 12” PLATTER& 6 T-SLOTS 4 TH AXIS CNC ROTARY TABLE Description: Up for sale is HAAS HRT 310 4 th Axis CNC Rotary Table. This HRT310 is in excellent working and operating condition. It features a 12” platter and 6 Standard T-Slots at 60°. SPECIFICATIONS: PLATTER S.A.E. Metric Diameter 12.2" 310 mm Number of Std T-Slots 6@ 60° 6@ 60° SPINDLE S.A.E. Metric Max Speed 0.001 to 75 °/sec 0.001 to 75 °/sec Max Torque 300 ft-lb 407 Nm Runout Max 0.0010" 0.025 mm Backlash 30 arc-sec 30 arc-sec Center Height 9.000 ± 0.001" 228.60 ± 0.03 mm Gear Ratio 72:1 72:1 Timing 2:1 2:1 Spindle Bore ø 3.250 x 9.875" 82.55 x 250.83 mm Brake Torque@ 100 psi/6.9 bar 500 ft-lb 678 Nm INDEXING S.A.E. Metric Max Rotation/Step 999.999 ° 999.999 ° Resolution 0.001 ° 0.001 ° Accuracy(±) ... more15 arc-sec 15 arc-sec Repeatability 10 arc-sec 10 arc-sec Worm Gear Dia 9.4" 235 mm GENERAL S.A.E. Metric Power Requirement 115 ± 10% VAC@ 15 A 115 ± 10% VAC@ 15 A Air Pressure Max 120 psi 8.3 bar Operating Temp(max ambient) 100 °F 38 °C Duty Cycle full/low speed 50/100% 50/100% WEIGHT S.A.E. Metric Brushless Control 14.2 lb 6.4 kg Table 435 lb 197.3 kg FOR MORE INFORMATION PLEASE CALL GARY AT(510) 453-0513 FREE SHIPPING! TO ANY BUSINESS IN THE LOWER 48 STATES FOR MORE INFORMATION PLEASE CALL GARY ARAGON AT 510 453-0513 LOCATED AT 601 ALADDIN AVENUE. SAN LEANDRO. CALIFORNIA 94577* TERMS AND CONDITIONS* SALES Your bid is a contract. Place a bid only if you are serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within three days of the end of the auction, or if payment isn’t received within three days of the invoice date, item may be offered to the next highest bidder or re-listed at the sellers’ discretion. Please do NOT pay until you are invoiced! PAYMENT TERMS Gary S. Aragon. LLC accepts ATM
|
|
|
Prolight table top CNC, with computer and software ready to go
Prolight table top cnc. Complete with computer and software and ready to run. We have used this periodically to machine plastic parts during production. We can send video of it running if needed. Any and all questions will be answered promptly. We will box up and provide shipping cost. On Apr-19-13 at 06:22:25 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES: `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13e22ec6753-0xf7-
|
|
|
MultiCam CNC Machine MG304 6.5' x 10' table w/ 20 hp vacuum and 8 tool changer
99' MultiCam CNC Machine MG304 6.5' x 10' table w/ 20 hp vacuum and 8 tool changer. 5hp router. This router is currently under power and in use! We cut parts using Cabinet Vision and Enroute. We cut all types of materials with it including: Wood. Plastic, foam, aluminum, and many others. Great machine and dependable. We are turning into a production milling shop and need more of a production type machine. This machine has served us well for several years. Comes with 8 tool holders and many collet adapters ranging from 3/4" to 1/8" The machine will be taken down on or about May 24th. If purchased before that, we will provide in-house training. If you are reasonably local to us, we will provide training in your facility instead if you want. We will make a training video if those options aren't available. We can send ... morea current video of the machine running upon request. Great machine! It won't dissappoint. Pictures of recent work are included. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13e2312acad-0xf7-
|
|
|
Light Machines Spectralight Table-Top CNC Milling Machine, Mill, Workshop
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Light Machines Spectralight Table-Top CNC Milling Machine. Mill, Workshop Item Description: This is a Light Machines Spectralight Table-Top CNC Milling Machine. Made by Light Machines Corp Spectralight Tabletop ... moreCNC Milling Machine Not tested. Sold as is. Approx. dimensions: 25" L x 21" W x 24" H Note Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. This auction is located at Naples. FL 34112 and being Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 33126) nbsp, nbsp, Model: This item is in FLORIDA Local pick-up only. nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Size: Approx. dimensions: 25" L x 21" W x 24" H, nbsp, nbsp, Condition: This item is used and sold as-is. Due to the location. This item was NOT TESTED for operation. Item may need service and/or parts to make operational. nbsp, nbsp, Pickup Logistics and Handling: NOTE: SHIPPING is NOT AVAILABLE for this item- LOCAL PICKUP ONLY. Due to the locatio
|
|
|
Alliant CNC Mill Milling Machine w/ Series 1100 Anilam Computer 50" x 14" Table
Normal 0 Welcome to my site! Alliant CNC Milling Machine w/ a Series 1100 Anilam Computer Includes all the disks for programming& Manual Table Dimensions: 10" x 50" 3 Phase RPM = 60-4500 X-axis travel = 590mm( about 23.23" y-axis travel = 270mm(about 10.63" Spindle Vertical Travel = 127mm(about 5" Knee Vertical Travel = 410mm(about 16.14"0 Motor is a 2 H.P. This machine takes Q wik Switch tooling. We have 14 Qwik Switch Tools we can sell separately. 3 are for key less Jacobs chucks. 2 are 1/2" 2 are 1/4" 1 is 3/4" 1 is 5/8" 1 is 1/8" 1 is 3/16" 2 are 3/8" and 1 is tapered Please see item description Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Everything is in great condition. ... moreMachine has been maintained very well. Table looks great. Everything moves with ease. It needs a new battery. The owner has quick change tooling for this machine that could be sold separately. We do not have the materials or the resources to ship this item. Item must be picked up or shipping arrangement s must be made solely by the buyer. We do not have any lifts on site. Moving equipment will have to be supplied by the bu yer. The shop does have a loading dock. If you have any questions. Please ask and I will respond quickly! I can provide a contact phone number if needed. Sometimes a real voice goes a long way! We can definitely arrange a viewing time for interest ed buyers. N.M. buyers will be charged a 7.53% sales tax Thank you! I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal or cash payments only please! Item must be pai
|
|
|
LOT OF 40 GAR NATL CNC 1892 AID DE CAMP TABLE RUNNER QUILT 45TH PA INF VETERAN
Welcome to CivilWarBadges Ebay Auctions. PLEASE MAKE PAYMENT WITHIN 3 DAYS 40 RIBBONS. HAND SEWN AND MADE INTO A SMALL TABLETOP RUNNER ~ IN TERRIFIC CONDITION ~ COMES FROM THE ESTATE OF CHARLES T. FRYBERGER, LATE MEMBER OF THE 45TH PENNSYLVANIA INFANTRY ~ MEASURES APPROX. 48" X 11 1/2" NICE WRITE UP ON THE LIFE OF FRYBERGER ONLINE.HERE IS PART OF THE MEMORIAL INCLUDING MENTIONING THE 1892 REUNION:Socially. Our subject was, in 1873, eminent commander of Constance Commandery No. 33, Knights Templar, at Bellefonte. In 1890 he was commander of John W. Geary Post No. 90, G.A.R. in 1891 was president of Mountain Lodge No. 144, Order of Tonti; in 1892 was regent of Centre Council No. 803, Royal Arcanum; in 1888 was elected trustee of the Grand Army Post NO. 90, and has since been continuously re-elected to that incumbency, holding it at ... morethe present time. In 1892 he was appointed aid-de-camp to A. G. Weissert, commander-in-chief of the Grand Army of the Republic of the United States of America, with rank of colonel. Politically, Capt. Fryberger is a Republican, and his popularity, both within and without the party, has been frequently practically demonstrated. In 1888 he was on the Republican ticket for Assemblyman to the Pennsylvania Legislature, facing a Democratic majority of 1,100, and was defeated by but 21 votes, reducing the formidable majority practically to a minimum. ~ PLEASE MAKE PAYMENT WITHIN 3 DAYS OF PURCHASE. THANKS FOR LOOKING AND HAPPY BIDDING! INTERNATIONAL BIDDERS WELCOME. PLEASE EMAIL FOR SHIPPING COSTS. CLICK ON THE"ME" ICON FOR MORE INFO! ALWAYS A LARGE INVENTORY OF GAR AND UCV ON HAND Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CM-250 CNC Plasma Table
One Used L-TEC CM 250 Shape cutting machine With cutting table and collection pan with two exhaust ports Table cutting surface able to cut 10 foot widesheet(123 in between rails) x 92.5" long Controller UCNC 7 controls for plasma and router controls Interlogic height control Machine is been taken out of service and disassembled as of April 24 2013 Sold as is Will Load on truck no charge;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e3e2b0772-0x105-
|
|
|
NSK CNC ROTARY INDEXING TABLE INDEXER 14.00" FACE 4th AXIS CNC
NSK CNC ROTARY INDEXING TABLE INDEXER 14.00" FACE 4th AXIS CNC No Cables
|
|
|
Tsudakoma RNCM-300R Hydraulic Clamp CNC Rotary Table Indexer 4-Axis 12" 16.7RPM
Search our eBay Store! Tsudakoma RNCM-300R Hydraulic Clamp CNC Rotary Table Indexer 4-Axis 12" 16.7RPM SKU: JV-EDD-C-ROTTSUMI Condition: Used Packaging: Pallet/Skid Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Tsudakoma RNCM-300R Hydraulic Clamp CNC Rotary Table Indexer 4-Axis 12” 16.7RPM Model: RNCM-300R Physical Condition: Good. Unit has some rusting to table. Other slight discoloration to unit. Some minor marks and scratches to table and casing. We do not have the necessary resources to test this unit. Dimensions(L" x W" x H" 28* 21* 9 Please visit the following link for product information(for informational ... morepurposes only) Please note the above link pertains to Tsudakoma RNCM-301R. A similar model. Specifications may not be accurate. PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you
|
|
|
HAAS CNC mill 5 axis TR110 rotary table TR1105X Tilting 2-Axis Trunnion Table
This trunnion table is in good working conditions. This also comes with the two hydraulic actuators. This cost brand new more that $25.000. Here is an opportunity to get one for a lot less. The unit has some scratches and missing paint on the electric cover but is otherwise in perfect working conditions. Please note that you need the drives(Not Included) to operate this as a true 5-axis operation, see some description bellow from the manufacturer. Please, ask any questions. Buyer pays for shipping and insurance. Insurance will be mandatory. If you are the winning bidder, email your address and I will find out the insurance cost. I will send the invoice with the total cost. This will be professionally packaged and will be a total weight of about 150 lbs. US buyers only, will only ship to US states. 110 mm(4.3" Tilting 2-Axis Trunnion ... moreRotary Table. Requires Haas mill with 4th-and 5th-axis drives for true 4th- and 5th-axis operation. Diameter, 4.33" Max Weight on Platter, 20 lb Part Swing Max, 7.35" Hole Pattern, 3 6-bolt patterns Pilot Bore Dia, 0.5000(+0.0005-0.0) Pilot Bore Depth, 0.30"
|
|
|
Troyke CNC 12 Inch Tilting Rotary Table TIL12CNC1970 (Inv.12620)
Troyke CNC 12 Inch Tilting Rotary Table: With two sets of motors(No control) Model TIL12CNC1970 Lot No. 3847-9 8-3/4inch table height at 0 degrees elevation 2 inch center hole(8) t-slots 1015lbs mounted to table This unit was used for an inspection process. The original motors(the black ones) were replaced with the exisiting motors for better positioning characteristics. Inv.12620) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of ... morethe auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
CNC BENCH TABLE TOP ROUTER
This is a used but in very good condition. Works like new and comes with all programs to simply paste dwg drawings, and, translate them into G code. I have had great results. It is a wonderful machine. The cut area is 40 x 22. Of which, it can be extended inch or two in each direction, with some adjustments to stops and such. For some reason. The website says 48 x 48 but it is as the images show, table is 48 x 24. Check it out at ~
|
|
|
OKUMA 7000 4TH AXIS CNC ROTARY TABLE NCR-240 WITH HOWA CHUCK 7003 H0921M8 S-884
You are looking at used and tested. OKUMA 7000 4TH AXIS CNC ROTARY TABLE NCR-240 WITH HOWA CHUCK 7003 H0921M8 S-884. SNO: 0059. With 30 day exchange warranty. Please view the pictures closely. We will not charge any handling fees. Shipping is available worldwide. Any questions please visit http:www.ljmachinery.com/AboutUS/aboutus or call Damian 586-215-6171. THANK YOU FOR LOOKING AT OUR LISTING DO NOT HESITATE TO MAKE AN OFFER. Terms& conditions(please read them before biding) You are supplied with 30 day exchange warranty on specific items when you"buy it now" All equipment is sold AS-IS. No warranty unless otherwise specified in description. Shipping: All items will be shipped upon receiving founds for this transaction. Pick up is available for all items. All items are sealed. Buyer protection programs are available, shipping ... moreinsurance is required and will be split between seller and buyer 50/50. We will not charge any handling fees, shipping is available worldwide and some extra charges may apply. Payment: All payments are expected in 5 business days after receiving invoice from LJ MACHINERY. We accept credit card payments online or by phone via our merchant(Visa. Master card, Discovery) We will accept PayPal for this transaction. We will accept wire transfer. Check, cash. Liability: Seller makes no claims as to the equipments compliance to LJ MACHINERY. Or any other safety standard, and is held harmless regarding any cost resulting from non-compliance. The seller and its agents are to be held harmless for any personal injury or property damage resulting from the use of this equipment. It is the buyer’s responsibility to inspect or otherwise verify safety standards relating to this equipment. It is the buyer’s responsibility as to the safe handling and operation of this equipment. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Kitagawa TMX250 cnc 4th axis rotary table w/ Bison chuck, Tsudakoma cables
Kitagawa 10" CNC rotary 4th axis table with Fanuc Alpha iF 4/4000 motor. A06B-223-B000. High quality heavy duty table with air-over-hydraulic clamping for high clamping force. Made in 2006 and in good used condition, over $20K new! Please note that unlike most of the rotary tables for sale on ebay, this table has a FULLY MODERN servo motor, Fanuc Alpha iF 4/4000, which is compatible with just about any modern CNC machine using Fanuc control. Contact Fanuc for specific model and servo drive compatibility. Includes a set of high quality matching Tsudakoma electrical cables(themselves worth several thousand $) and custom air hose. One of the cables has a couple areas where the stainless steel braid is worn through- the cable underneath is not damaged. Just the outer jacket, see pics. Also includes a Bison Set-Tru 10" 3-jaw chuck with ... moremounting plate and hardware, standard hardened removable ID/OD jaws, could also use machinable jaws of course(not included) Must ship via truck freight due to weight. And I am including FREE shipping to lower 48 states in my asking price. I will discount for a local pickup in Ft. Collins CO, and I have a forklift to load into a truck or van. Please feel free to contact me through ebay for questions or to make an offer. Thanks. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13e558e7622-0xfe-
|
|
|
TSUDAKOMA RNCM-301R CNC ROTARY TABLE
TSUDAKOMA CNC ROTARY TABLE MODEL: RNCM-301R S/N 982465 NEW 1998 SPECIFICATIONS: TABLE DIAMETER: 12.6” CENTER HEIGHT: 8.27” CENTER BORE DIAMETER: 1.57” NET WEIGHT: 440 LBS. CLAMPING SYSTEM: HYDRAULIC ALLOWABLE WORK LOAD: VERTICAL: 330 LBS. WITH TAILSTOCK: 770 LBS. HORIZONTAL: 770 LBS. EQUIPPED WITH: RED CAP FANUC SERVO DRIVE Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ALPHA 12/2000. A06B-0142-B077#7000, 2.1 KW, 2000 RPM. 200 VOLTS. TAILSTOCK
|
|
|
CNC Pratt & Whitney Trimac X Vertical Machining Center 47 x 19" Table Fanuc 6MB
CNC Pratt& Whitney Trimac X Vertical Machining Center 47 x 19" Table Fanuc 6MB Control. Automatic Tool Changer, Travels X- 39.4" Y- 19.7" Z- 19.7" 45 Taper Spindle, Heavy Machine weights around 17600 Lbs, Just removed from service It did have an alarm on screen But was not told what it was. Selling as You see it. Buyer pays $450.00 Rigging and loading charge. We will ship You send the Truck. Buyer pays all shipping costs from Pa Zip code 18966*
|
|
|
CNC Pratt & Whitney Trimac V Vertical Machining Center 43 x 15" Table Fanuc 6MB
Pratt& Whitney Trimac V CNC Vertical Machining Center 43 x 15" Table. Fanuc 6MB CNC Control, Automatic Tool Changer, Travels X- 29.5" Y- 15.7" Z- 17.7" Built in Chip Convayor, 45 Taper Spindle, Heavy Machine weights around 9900 Lbs, Just removed from service. Selling as You see it. Buyer pays $450.00 Rigging and loading charge. We will ship You send the Truck. Buyer pays all shipping costs from Pa Zip code 18966*
|
|
|
DMS 3-Axis CNC Router - 3T5-10-24SCOxxx w/ Fagor 8055 Controls - 5' x 10' Table
Diversidied Machine Systems Router 2005 DMS router in great used condition. Used very little in a laboratory environment and not used in production. There are two air cylinders not mounted on the top of the unit. We have these as they were simply removed for transport. This unit is truly in excellent condition and we will work with the buyer to rig and transport. This comes with some tooling and the only thing we can find wrong is that one of the tool holders on the carousel is damaged(see pic) It appears that the tool was still in the holder when the machine began spinning and melted the plastic. Table: 5' x 10' Fagor 8055 controls 7 position tool changer with 9 tool holders included Omlat spindle motor: Draw# 06478 Please feel free to contact us with any questions. Inspection by appointment in Rochester. NY. Shipping: We have the ... moreability to load the router on your truck. But if packaging is needed, please contact us to make arrangements. This is very large. Very heavy piece of equipment and may require special handling, packaging and rigging depending on location. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. PLEASE NOTE: Due to the way freightquote.com words their Bills of Lading. We will no longer be allowing any shipments made through them. You can contact us for more details, but please be advised that we will not sign a freightquote.com BOL. We apologize for any inconvenience and we will do everything we can to assist in finding the best freight price we can. All others will
|
|
|
1995 TSUDAKOMA MODEL TRNC-301 12 INCH 4TH AND 5TH AXIS CNC ROTARY TRUNION TABLE
HIGH PRECISION TILTING ROTARY TABLES TRNC-Series tables feature a ±110° tilt range due to a unique differential gear system. The motor section does not move allowing for simplified cable management. Model TRNC-151S TRNC-201S TRNC-301S Tilt Range-110° ~ +110° Table diameter 160 225 320 Table height at 0° position 260 315 345 Center height at 90° position 190 235 255 Center bore Nose Diameter 35H7 40H7 40H7 Thru Diameter 35 32 40 Table T-slot width 12H7 12H7 14H7 Guide block width 14h7 18h7 18h7 Servo motor(Fanuc) Rotary Tilt Rotary Tilt Rotary Tilt Alpha 4i Alpha 4i Alpha 4i Alpha 4i Alpha 8i Alpha 8i Maximum motor speed rpm 4.000 4,000 4,000 4,000 3,000 3,000 Speed reduction ratio 1/180 1/180 1/360 1/360 1/360 1/360 Maximum table speed rpm 22.2 22.2 11.1 11.1 8.3 8.3 Inertia converted into motor shaft x 10-3kg.m2.08.3.33.59.38.63 ... moreClamp system Pneumatic Pneumatic Hydraulic* Hydraulic* Hydraulic* Hydraulic* Clamp torque@72psi[500 psi] Nm(ft. lbs. 225(166) 225(166) 490] 361) 490] 361) 833] 614) 980] 722) Indexing accuracy arc sec. ±10- ±7.5- ±7.5- Indexing repeatability arc sec. ±2- ±2- ±2- Tilting accuracy(0° ~ +90°) arc sec. ±22.5- ±22.5- ±22.5 Tilting accuracy(90° ~ +90°) arc sec. ±30 ±30 ±30 Tilting repeatability arc sec. ±2- ±2- ±2 Net Weight kg(lbs. 145(319) 280(616) 350(770) Allowable wheel torque- rotary Nm(ft. lbs. 147(108) 470(346) 764(563) Allowable work inertia kg.m2.15.63 1.91 Allowable work weight kg(lbs) 0° tilt angle 50(110) 100(220) 150(330) 0° ~ 90° tilt angle 35(77) 50(110) 100(220) Allowable work moment Nm(ft. lbs. 78.4(57.8) 156.8(115.6) 254.8(187.8) Allowable load when table clamped N(lbf) 6.860(1.537) 9.800(2.195) 14.700(3.293) Nm(ft. lbs. 225(166) 490(361) 980(722) Nm(ft. lbs. 225(166) 490(361) 980(722)
|
|
|
CNC 7' Ez-Load Routing Table
This used CNC router with 3.25 hp& a Pentium computer with software preloaded has been a wonderful piece of equipment. Just looking to make some room in my work shop.
|
|
|
Nikken 10" CNC250 Rotary Table CNC-250 for Mazak Nexus and VTC Machining Centers
Nikken 10" CNC250 Rotary Table CNC-250 for Mazak Nexus and VTC Machining Centers Nikken’s Patented Hardened. Worm Screw System. Nikken’s Rotary Tables are known worldwide. For their long-term reliability and productivity. These benefits. Along with our unparalleled. Long-term accuracy and repeatability. Are. Achieved mainly due to our Ion Nitrided Worm. Wheel(HV930) Ion-Nitrided Worm Wheel. Extremely durable and wear resistant. Maintains long-term accuracy. Custom Bearings. Designed and manufactured by Nikken. Excellent weight load capacities. Large custom roller and thrust bearing surfaces. Measured in micron accuracies. Reduces friction and wear by up to 8 times. compared to common phosphorous bronze. And aluminum bronze worm wheel construction) Reduction of wear translates into reduced. Maintenance. And therefore more uptime and. ... moreProductivity. Exceptional Brake Torque. New double-intensifying clamping. Mechanism utilized. Powerful clamping is achieved. Backlash Compensation. As wear is reduced. So is the need. For backlash compensation. This. Chart shows typical wear characteristics, As well as the necessity for. Frequent backlash adjustments for. Other manufacturers' rotary tables.
|
|
|
NSK CNC ROTARY INDEXING TABLE INDEXER 8.75" FACE 4th AXIS CNC
Nice NSK Nippon Seiki Rotary Indexer Head. 8.75" diameter Very Clean. I also have a controller for sale on ebay that controls this indexer. See the listing referenced below; Comes as shown in pictures. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13e6d35d1fc-0xf8-
|
|
|
NIKKEN 4TH AXIS TOP SIDE CNC ROTARY TABLE 200FA /W FANUC(OS)MOTOR A06-B0313-B001
Up for Sale. NIKKEN 4TH AXIS TOP SIDE CNC ROTARY TABLE 200FA/W FANUC(OS)MOTOR A06-B0313-B001 MODEL CNC 200FA MOTOR A06-B0313-B001 TABLE SIZE 8" THROUGH HOLE 2" YEAR 1991 CALL. TEXT OR EMAIL WITH QUESTIONS. SE HABLA ESPAÑOL. OCMACHINERY AT GMAIL COM 714 658 5390 We can help with a freight quote. LTL, Full Trucks, Flat Bed and local delivery. All purchases less than 150 lbs will ship UPS. Fedex or USPS. FREE LOADING IN MOST PURCHASES
|
|
|
TSUDAKOMA 4 AXIS, 5 AXIS TRUNNION TILTING ROTARY TABLE CNC
For Sale is a lightly used Tsudakoma Trunnion Tilting Rotary Table Model TRNC-201 SN 001011. This 4th and 5th axis tilting rotary table is in excellent condition and is very accurate. The motors are not included with the table. And will need to be added to fit the current drives in your CNC. This has a 225mm Dia. Table. Tilting range-110 to +110 Degrees. Approx 600lbs. The Trunnion configuration is at the same level between the Tilting axis and top of Rotary axis. So this Tilting table enables highly accurate and productive machining. Customer must pay freight costs for shipment. Pick up is available. We are located in York. Pa Exact Stock# 0058 37,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28d03%3C%3E37-13e6de81b82-0xf9-
|
|
|
8" TOYO SEIKI" Precision CNC Lathe haas fadal Multi-Axis Indexing Rotary Table!
A" No Reserve" Auction with Very Low opening Bid for: 1- Toyo Seiki Rotary Indexing Table Very Nice Unit Photographs say the rest! Model: 8" Buyer will recieve exact unit shown in photographs Condition(As Shown) Excellent- Used- Working Buyer will recieve the unit shown in the photographs Package Weight(Approx) 135 lbs. SHIPPING: US Only) $95.00 International Shipping: $Inquire Click Here to view our other auctions! Powered by On Aug-18-12 at 13:28:42 PDT. Seller added the following information: Sellebrity Analytics.
|
|
|
Laserspec 800 3-axis high-speed CNC router with vacuum table, software, bits
This is an amazingly versatile system with a z-axis speed equal to the x-y. The 9-inch Z travel. Supported by air piston(compressor and air desiccator included) allows deep 3-D milling at high speeds. The system was used briefly to create prototype composite molds for sporting goods and has been in dry storage for a few years. The MDF vacuum table can take jigs, screws, or simply secure pieces with suction. The Windows based controller software is plug and play with any CADCAM system. All components in perfect working order. There is no warranty on this system. I will help arrange shipping from its current location in Boulder. CO. Shipping cost not included in the auction bid amount. For more information please contact me at stucker1980@me.com.
|
|
|
Pratt&Whitney 24" tilting precision rotary table cnc ready
This is a tilting rotary table for upright mill I have the cnc bars and digital reader for table. If have any questions plz call ken at 760-608-3432 Posted with
|
|
|
CNC Plasma table-Tracker Nitro 4x4
4x4 cutting area-Automatic Torch Height Control-No Plasma Cutter-Integrated Onboard Computer System-ProTable Command Center-Corel Design Software-Sigmanest Optimization Software-Dropped" Linear Rail Design- Dropped linear rail system locates the gantry rail's below the cutting deck surface to ensure safe& easy loading from any side of the ProTable. Rails are nestled inside the massive main beams of the table frame for further protection Does Not include a Plasma Torch. Requires a Machine Torch for Operation.
|
|
|
HAAS CNC MILL ROTARY TABLE INDEXER CONTROLLER 17 PIN 310 , 210 HRT 160 HA5C
BOXED ITEM Haas Indexer rotary table control box 17 pin connector Ha5c indexer or HRT rotary tables copy of manual shown info here: Haas Automation Paypal. Cash, checks, mo Shipping paid by buyer. See calculator or flat rate for price. Local pick ups are fine. Item must be paid on time and removed with in ten days from payment or storage fees will apply. Domestic handling time Will usually ship within 5 business days of receiving cleared payment. Shipping insurance Optional(based on location and shipping service) Sales tax Seller charges sales tax for items shipped to: IL(8.750% Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping Any Flat rate shipping price listed is to the lower 48 states only. I will combine shipping costs ... moreon multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. All items are sold"AS- IS. Where- IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We and/or the Seller make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. See are high positive feedback rating and bid with confidence. I always return feedback so leave some good comments so I can do the same for you. Please see my other auctions. You never know what bargains you will find! Welcome to another auction by Best Bay Machinery Sales. We specialize in offering high quality new and used metalworking equipment for machining and fabricating at affordable prices. Check out our store for the best deals on machinery. New items every we
|
|
|
HASS ROTARY INDEXER 5c - Motor & Cable with CNC MILL ROTARY TABLE INDEXER.
5C ROTARY INDEXER- Motor& Cable- Brush 7-Pin with CNC MILL ROTARY TABLE INDEXER CONTROLLER 7 PIN. Fully operative and good condition.
|
|
|
CNC Plasma Table PlasmaCam
Used CNC PlasmaCam Plasma Table Model 98Z Serial#2546 Works great. Includes plasma table. Cnc controls and lower rolling table. The custom lower table allows the plasma table to mount on top of the table and be easily moved around on its casters. Additionally it has a mount for the plasma machine and a small table above the plasma mount. Above the plasma mount is a swing arm that allows you to mount a lap top on top and easily swing it out of the way when not in use. Very nice feature. Includes original manual and cd's/program plus a back up manual for the shop. We just purchased a waterjet and need the space. All you need is to hook up your desk top or lap top computer and plasma machine and your ready to start cutting precision parts! Call or email us with any questions. Local pickup preferred in San Diego as the lower table is fully ... morewelded and costly to ship. Thanks for looking!
|
|
|
1998 KOMO CNC ROUTER W ATC & 5 X 12 TABLE
THIS IS A LARGE XTRA HEAVY DUTY CNC ROUTER W 8 POSITION TOOL CHANGER WITH A SUPER SOLID 5' BY 12' TABLE.THE TABLE IS VERY NICE WITH 2 DIFFERENT TYPES OF WORK ZONES ONE FOR WOOD AND THE OTHER FOR ALUMINIUM OR OTHER TOUGH MATERIALS WITH HEAVY CLAMPS OR LARGE TABLE VACCUM CHUCK WITH 2 BECKER VAC PUMPS EACH ABOUT 5 HP MACHINE ALSO HAS CENTRAL LUBE PLANT. AND BOXES AND BOXES OF SPARE PARTS INCLUDING ROUTER MOTOR AND ENTIRE AXIS DRIVE; AND MANY MANY OTHER BOXED PARTS THIS MACHINE IS 25 FEET LONG AND IS 15,000 LBS, NOT A LIGHTWEIGHT! READY TO GO TO WORK, NEW PAINT, LOOKS GREAT.
|
|
|
CLEAN! NIKKEN 7.87" (200mm) 4TH-AXIS SERVO ROTARY TABLE & TAILSTOCK - #CNC-200YA
aims CLEAN! NIKKEN 7.87" 200mm) 4TH-AXIS SERVO ROTARY TABLE& TAILSTOCK- CNC-200YA read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in Japan by Nikken Kosakusho Works. This is a used 4th-Axis Servo Rotary Table& Tailstock in GREAT condition. Model# CNC-200YA Serial# 3473 Features: Compatible with Yasnac Controls. Tailstock. 6-1/2" Three-Jaw Chuck. Specifications: Table Diameter: 7.87" 200mm) Table Center Height: 5.90" 150mm) T-Slot ... moreWidth: 0.47" 12mm) Through Hole Diameter: 1.96" 50mm) Clamping System: Air. Clamping Torque: 144 ft. lbs. 196 n.m. Minimum Increment: 001 degrees. Total Reduction Ratio: 1:90. Maximum Table Rotation Speed: 22.2 min-1. Indexing Accuracy: 20 arc seconds. Vertical Table Work Load: 220 lbs. 100 kg) Horizontal Table Work Load: 440 lbs. 200 kg) Overall Dimensions of Rotary Table: 25" x 12" x 11-1/2" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CLEAN! NIKKEN 7.87" 200mm) 4TH-AXIS SERVO ROTARY TABLE& TAILSTOCK- CNC-200YA CLEAN! NIKKEN 7.87" 200mm) 4TH-AXIS SERVO ROTARY TABLE& TAILSTOCK- CNC-200YA CLEAN! NIKKEN 7.87" 200mm) 4TH-AXIS SERVO ROTARY TABLE& TAILSTOCK- CNC-200YA CLEAN! NIKKEN 7.87" 200mm) 4TH-AXIS SERVO ROTARY TABLE& TAILSTOCK- CNC-200YA CLEAN! NIKKEN 7.87" 200mm) 4TH-AXIS SERVO ROTARY TABLE& TAILSTOCK-
|
|
|
CLEAN! NIKKEN 200mm (7.87") 4TH-AXIS SERVO ROTARY TABLE + TAILSTOCK - #CNC-200FA
aims CLEAN! NIKKEN 200mm(7.87" 4TH-AXIS SERVO ROTARY TABLE- CNC-200FA read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in Japan by Nikken Kosakusho Works. This is a 4th-Axis Servo Rotary Table in GREAT condition. Model# CNC-200FA Serial# 2513 Features: Compatible with Fanuc Controls. Tailstock. 8" Three-Jaw Chuck. Specifications: Table Diameter: 7.87" 200mm) Table Center Height: 5.90" 150mm) T-Slot Width: 0.47" 12mm) Through Hole Diameter: ... more1.96" 50mm) Clamping System: Air. Clamping Torque: 144 ft. lbs. 196 n.m. MIN. Increment: 001 deg. Total Reduction Ratio: 1:90. Maximum Table Rotation Speed: 22.2 min-1. Indexing Accuracy: 20 arc sec. Vertical Table Work Load: 220 lbs. 100 kg) Horizontal Table Work Load: 440 lbs. 200 kg) Overall Dimensions: 23" x 13" x 11" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CLEAN! NIKKEN 200mm(7.87" 4TH-AXIS SERVO ROTARY TABLE- CNC-200FA CLEAN! NIKKEN 200mm(7.87" 4TH-AXIS SERVO ROTARY TABLE- CNC-200FA CLEAN! NIKKEN 200mm(7.87" 4TH-AXIS SERVO ROTARY TABLE- CNC-200FA CLEAN! NIKKEN 200mm(7.87" 4TH-AXIS SERVO ROTARY TABLE- CNC-200FA CLEAN! NIKKEN 200mm(7.87" 4TH-AXIS SERVO ROTARY TABLE- CNC-200FA CLEAN! NIKKEN 200mm(7.87" 4TH-AXIS SERVO ROTARY TABLE- CNC-200FA CLEAN! NIKKEN 200mm(7.87" 4TH-AXIS SERVO ROTARY TABLE- CNC-200FA C
|
|
|
Vicon CNC Plasma Table
This table is up for sale again due to prior buyer not paying for the item. Used Vicon plasma table. Table is 5' x 10' cutting area. Fabricators model with automatic torch height control($4800.00 option) Vintage is 1998. Software was updated at one time yet has not received any new updates over the past 6 years. Table is in used condition and shows the wear and tear a machine of this vintage would be. This table is still under power and available to see running. Currently using Vicon cutting software, can cut from.DWG files, use rectangular and round HVAC fitting files or draw your own parts in drawing program. We have burned parts up to 1/2" thick HR without any problems and severed 5/8" thick HR. Plasma machine"package" will include the computer system, torch height controls, 100 AMP Hypertherm power source and ... moretorch, extra consumables and manuals are included in the sale. We are upgrading and going to a 8' x 20' table and no longer need this table. We would include all of the exhaust system(including blower) with the system if requested. This is a ready to run machine with controls at an exceptional price. Buyer pays for shipping, we will load onto flatbed at no cost.
|
|
|
HAAS MODEL 8RT CNC ROTARY TABLE AND CONTROLLER INDEXER INDEXING 11 PIN Interface
HAAS MODEL 8RT CNC ROTARY TABLE AND CONTROLLER TESTED AND WORKING. 11 PIN SERVO CONTROL IF YOU ONLY NEED THE TABLE. SEND A MESSAGE OR OFFER FOR ONLY THAT PART. SPECIFICATIONS TABLE TORQUE- 40 FT.LBS. +5/2 TABLE BACKLASH- +/ 1 MINUTE TABLE SPEEDS- FEEDRATE SELECTABLE FROM 1 DEG/SEC TO 30 DEG/SEC INDEXING ACCURACY- +/ 30 SECONDS IN ONE DIRECTION REPEATABILITY- WITHIN 10 SECONDS RESOLUTION- MINIMUM OUTPUT TO TABLE- 1 MINUTE MAXIMUM OUTPUT TO TABLE– 540 DEG. MOTOR- 450 OZ-IN SYNCHRONOUS STEPPING MOTOR GEAR RATIO- 90 TO 1 SELF LOCKING WORM GEAR WITH PRELOAD DUTY CYCLE- 50% MAXIMUM DUTY CYCLE OPERATING TEMPERATURE- 100 DEGREES F. MAX. AMBIENT AIR TEMP. POWER REQUIREMENTS- 120 VAC +/ 5% AT 5 AMPS WEIGHT- TABLE 71 LBS. CONTROL 13 LBS. TABLE HEIGHT- 4.0" TABLE DIAMETER- 8" DIMENSIONS- CONTROLLER(H.W,D) 4-1/2" X 11-1/8" X 13-1/4" ... moreTABLE(H X W X D) 6" X 16" X 12" WEIGHT- CONTROLLER- 13 LBS. TABLE- 71 LBS.
|
|
|
tavola croce NSK fresa fresatrice cnc milling machine Kreuztisch table Achse xy
Tavola croce motorizzata per la realizzazione di una fresa CNC verticale professionale. La Meccanica marcata NSK(da non confondere con cineseria basso costo) permette di avere una precisione affidabilità e durata NOTEVOLI nel tempo. Piano di lavoro in metallo duro(ghisa) Motori stepper da 3.1Nm. Peso oltre 45Kg. Molto stabile e precisa nelle lavorazioni di metalli duri. La trasmissione con cinghie e pulegge permette ammortizzamento spunto partenza motore molto importante per i motori passo passo con un grado di precisione elevato. PER UTENTI CON FEEDBACK INFERIORI A 3. CONTATTATEMI PRIMA DI FARE OFFERTE. Vedi video: http:www.youtube.com/watch?v=nGSXI58GUYI http:www.youtube.com/watch?v=9Ly-aMwJr-c http:www.youtube.com/watch?v=F125rHuruKI Vedi Foto: http:www.youtube.com/watch?v=EQZiUs6grzg CARATTERISTICHE: Motori stepper 3.1Nm(collegamento ... morebipolare serie) Peso 45Kg. Limit Switch finecorsa: 2 su ogni asse. Vasca inox raccogli trucioli e liquido refrigerante 500x350mm- Piano di lavoro in metallo duro 3 T-Slots da 8mm 400x145mm. Asse Y: Chiocciola NSK 16mm passo 5- pulegge rapporto 1:1. 4 Carrelli ricircolo sfere NSK su 2 binari acciaio temprato NSK 20mm. Spostamento Utile= 212mm. Con passo intero del drive si avrà una precisione per passo = 0.025mm. Asse X: Chiocciola NSK 16mm passo 16- pulegge rapporto 2:1 = diventa passo 8 4 Carrelli ricircolo sfere NSK su 2 binari acciaio temprato NSK 15mm Spostamento Utile = 285mm Con passo intero del drive si avrà una precisione per passo = 0.04mm_ Quello che vedete nelle foto e nei video è esattamente quello che vi arriverà a casa. La vendita è per un oggetto Usato perfettamente funzionante. Usato soltanto per dimostrazioni(vendita da privato) I MIEI FEEDBACK SONO GARANZIA DI SERIETA' PAGAMENTO: VENDITA PER L'ITALIA Metodo di Pagamen
|
|
|
HAAS TWO AXIS CONTROL BOX 4TH AND 5TH CNC MILL ROTARY TABLE INDEXER HRT 160 HA5C
Check out my! HAAS TWO AXIS CONTROL BOX BRUSH TYPE CABLE CONNECTION( 17 PIN) PLEASE CHECK OUT THE PICTURES DOWN BELOW QUANTITY OF 10 AVAILABLE Condition: NEW. In box NEW. No box NEW. Old inventory X USED. In great working condition, tested USED. In good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: 7 DAY MONEY BACK( VISIT OUR EBAY STORE) Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day ... morein order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake
|
|
|
HAAS CONTROL BOX 17 PIN, CNC MILL ROTARY TABLE INDEXER HA5C HRT160 HRT210 HRT310
Check out my! HAAS CONTROL BOX BRUSH TYPE CABLE CONNECTION( 17 PIN) PLEASE CHECK OUT THE PICTURES DOWN BELOW QUANTITY OF 10 AVAILABLE Condition: NEW. In box NEW. No box NEW. Old inventory X USED. In great working condition, tested USED. In good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: 7 DAY MONEY BACK( VISIT OUR EBAY STORE) Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order ... morefor us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hy
|
|
|
CNC Plasma table, runs on Mach 3, shop made
For Sale: Shop made CNC plasma table. Computer is Windows XP, table runs on Mach 3. Table is 5 ft by 8 ft. You can view the table working on this youtube video link if you have an iphone. There is not a plasma cutter with this table just the table. Computer with flat screen and the motor controller. The table and the medical computer cart are on casters so you can easily move it in your shop. This unit is being sold as is. Local pick up preferred, or I will work with your shipper on loading.
|
|
|
Roland MDX-40 3D CNC mill with rotating table
Roland MDX-40 3D CNC mill including 4-axis rotary table andauto calibration for Z-axis. This machine is in very good condition. It is one owner and has been used to millmodels in wax. We are selling the mill and rotating table along with theModela CAM software in this transaction. I am willing to help identify sources for any tools or accessoriesyou might require. Shipping available to United States or Canada(Canadian shipping likely higher. Customs charges additional)
|
|
|
SPI 2 to 5 Axis Vise Mill Stop Fits Bridgeport 5/8" Table & other CNC T slots
SPI 2 to 5 Axis Vise Mill Stop Fits Bridgeport 5/8" Table& other CNC T slots. Like New Condition Very few tiny knicks on stop surfaces. Has both T-Slot nuts for Bridgeport and smaller size for other CNC tables(ie; Mycenter cnc) No modifications. Original stop rod(1/4) Use for any position job requires. Made in USA by SPI. Purchased originally from MSC for $157.65 USA shipping only.
|
|
|
Used Prima CNC Laser Cutting Machine with Shuttle Table Model LM1530 2200 Watt
SAVE OVER $100.000 OFF NEW! Building Closure: Priced Thousand's Below Dealer Cost Must Move Now The building this machine is located at is closing and this machine is priced for IMMEDIATE SALE& REMOVAL! NO WARRANTY- SOLD AS-IS Watch A Video Of The Laser Here: http:youtu.be/4KTho0HCCto Used Primach CNC Laser Cutting Machine with Shuttle Table THIS MACHINE IS LOCATED IN ROCK ISLAND. IL and will ship from that location. IT MUST BE MOVED WITHIN 3 DAYS! BUYER IS RESPONSIBLE FOR SHIPPING AND ALL LOADING FEES. Manufacturer: Primach Model: LM1530 Capacity 2200 Watt Includes Dust Collector: Model C24-2K3AD Year: 1996 Primach-L Controller Chiller HCV 15.000-PR-NF Maximum Laser Output: 2.200 Watt Sheet Size: 60" x 120" Travels: 120" x 60" x 5" Sales Tax: contact us prior to purchase for rates(only applies to in-state ... moreCalifornia buyers and local pick-up buyers) Freight will vary based upon delivery area. You must contact us so we can make arrangements and get you a personalized quote on freight. This is a non-returnable item. TBuyer is responsible for INSURANCE with the assigned freight carrier- please read the terms and condition below(subject to change. Please call us if you have any questions before you commit to purchase this item) Because of the high dollar amount of this item. Wire transfer is the preferred method of payment, if you choose to use a credit card it may be subject to an additional fee up to 5% of the purchase price, we also reserve the right to refuse credit cards due to the value of this machine. TERMS& CONDITIONS(Please read. You agree to these terms upon purchase) Payments Payments are due at the end of the auction. Any unpaid items may be offered to the next highest bidder within 4 business days. Any balance not paid in full will result in an unpaid dispute being filed with eBay after 4 business days. Wire Transfers and Direct Deposits Wire transfers are the most preferred method of payment. Please call us at 626-444-0311 for instructions. Credit Cards Due to fees
|
|
|
CNC Horizontal Boring Mill, 5" Cincinnati Gilbert Type J Table Type
Contact Mark Harris at 773-290-1824 or mark@assetexchangeinc.com to find out more about this Great Running Boring Mill! In Chicago ready to be inspected. Machine has been very well maintained and ready for production. Can be loaded onto customer trucks. 5" Cincinnati Gilbert Model J CNC Table Type Horizontal Boring Mill 5" Diameter Spindle. 120" Cross Travel, 84" Vertical, 108" Longitudinal, 50 Taper, Fagor CNC Specifications(Preliminary) Diameter of Spindle: 5" X Axis Cross Travel of Table: 120" Y Axis Vertical Travel of Headstock: 84" W Axis Table Longitudinal Travel" 108" Z-Axis Travel Spindle Out feed: 30" Table Working Surface: 60" x 121" Spindle Speeds: 15-700 RPM(Direct Drive) Feed Range: 0- 150 IPM, Ball Screw Diameter: 2.50" X Axis) 25" Leads, Ball Screw Diameter: ... more2.25" Y/Z Axis) 50" Leads, Spindle Taper: 50 NMTB, Outrigger Support Length: 174" Main Motor Drive: 30 HP, Eqiupped With: Fagor 8030MS CNC Control. Full pendant Control(For Manual Operation) Outrigger Supports, Ball Screws& Independent Drives, Power Draw Bar(Operated From Pendant) Hardened& Ground Ways Bed, Saddle and Vertical, Threading Capable, Telescoping Way Covers, Manuals and Electrical Schematics,
|
|
|
Emco F1 CNC Mill Table Studs, One Pair, 1-3/16" Long 0426
Emco F1. PCMill 50 and PCMill 55 T-Nut Studs, Set of 2. Description: Studs for clamping tooling to Emco F1 series precision milling table. Condition: Very good condition. Sold as shown: Shipping: Charges shown are flat rate to US ONLY. I combine shipping when possible. I ship from Ann Arbor. Michigan 48103. That's all I can tell you. I'm not an engineer. I accept Paypal(preferred) Personal checks(domestic buyers only) and money orders. Please allow extra time for non-Paypal funds to clear. Returns: Policy Updated 2012 I offer a 30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a mistake in the listing. I offer a full money back refund(with shipping both ways) but you must return the undamaged item to me. I do not offer partial refunds and ... moreor replacements; I only offer my refund policy as stated above. In the event of loss or damage in shipping(that is out of my control) You agree in advance to cooperate so I can file an insurance claim for the loss or damage and issue a refund to you. If you win this auction. You will be expected to execute a paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately!
|
|
|
CNC Router Kit Mill Machine Table Travel 24"x24" Milling with Spindle VFD
COMPLETE CNC ROUTER KIT! This is a 24"x 24" x 4.25" CNC KIT. It's milled from 6061 aluminum. 20 mm rods, two precision forged double bearing blocks, and an oil flush connector on each axis. Supplied with grade 8 bolts; 16mm Ball Screws with bearings and a nut on both ends to relieve stress on the motors and hold the precision. This unit is a kit, which means the X&Y will not be assembled. The Z will be assembled and simple tools will be needed to put the X&Y together. SPECS: X&Y&Z 20mm rods and bearings X = 24 inch table APPROX 30 inches Y = 24 inch table APPROX 30 inches Z = 4 ¼ inch X. Y and Z 16mm Lead 5mm Ball Screws Accuracy.001 3 = Nema 23 270 oz stepper motors 3 = precision motor couplers 1 = 4 axis's controller 3.5 amp 1 = 24v. Power supply 1 = db25 cable 1 = Spindle mount for supplied Spindle ... moreHere's the"Low Down" on this unit. PLEASE READ EVERYTHING! I purchased the kit here on Ebay from Ed. A reputable dealer that has been always eager to help. I decided to go a different direction and get a bigger machine. This machine is about 1 year old but has only been assembled for 6-7 months and only used twice to cut a couple of test pieces on wood. I had also purchased a 1HP water cooled spindle from UGRACNC and a 110V VFD to control the spindle. The spindle runs up to 24000 RPM and its supper quiet. Its brand new and never seen any water or a job. The VFD is top quality purchased from Wolf Automation and its also brand new. I will also supply the hose for the spindle and the water pump(if I can find it) I have decided to keep the original motors and controller and power supply that way the winner will get new stuff. Only thing not supplied are the limiy switches that are sen on the pics but they are not good so I got rid of them. Brand New Nema 23 270oz stepper motors Brand New 4 axis's controller 3.5 amp Brand New 24v power supply Plus the cable is also new(25ft) A few other parts are also new and wrapped still. This unit will take an evening to pu
|
|
|
Vacuum Table for CNC Mill 2" thk x 20" w x 44" long
Vacuum Table for CNC Mill 2" thick x 20" wide x 44" long Holes 13" x 39" 43 holes x 96 holes x 1/8" diam x 3/8" center lines with 1 1/12" diam hose connector and dial Vacuum Gage. ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3579 BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST shipping dimensions: 48" x 36" x 12" approx. 150 lbs
|
|
|
Lintech 32" Linear Actuator Table Slide Belt Driven CNC + RSF Linear Scale
Lintech 32" Linear Actuator Table Slide Belt Driven CNC + RSF Linear Scale. If for any reason you are unsatisified. Item can be returned within 2 weeks in condition received for refund of purchase price. Included In Sale: 1) Lintech 32" Linear Actuator Table Slide Belt Driven Model# 203353 Overall Dimensions: 32 1/2 x 8 1/2 x 3 Inches Travel: 19 Inches. 1) RSF Electronics Linear Scale Type: MSA 6702 P/N: B02350731029 ML 520MM Pitch: 20 UM Signal: Square Wave I accept Paypal. Money Orders or Checks. I ship by UPS or USPS.
|
|
|
THK Ballscrew Driven Linear Table Slide CNC 20 x 7 x 4
THK Ballscrew Driven Linear Table Slide CNC 20 x 7 x 4. If for any reason you are unsatisified. Item can be returned within 2 weeks in condition received for refund of purchase price. Included In Sale: THK Ballscrew Driven Linear Table Slide CNC THK Bearings# HR1530. Overall Dimensions: 20 x 7 x 4 Inches Travel Plate: 7 1/2 x 6 1/2 Inches. Travel: 12 Inches. Pitch: 5mm Per Rev. Ballscrew Shaft: 20mm. 3/8" Dia Pully End. 5/16" Drive End. I accept Paypal. Money Orders or Checks. I ship by UPS or USPS.
|
|
|
Hiwin Linear Table Slide Ballscrew Drives CNC 13 x 7 x 4
Hiwin Linear Table Slide Ballscrew Drives CNC 13 x 7 x 4. If for any reason you are unsatisified. Item can be returned within 2 weeks in condition received for refund of purchase price. Included In Sale: Hiwin Linear Table Slide Ballscrew Drives CNC Overall Dimensions: 13 x 7 x 4 Inches Travel Plate: 7 1/2 x 6 1/2 Inches. Travel: 2-3 Inches. I accept Paypal. Money Orders or Checks. I ship by UPS or USPS.
|
|
|
Accu-Fab Linear Robotic Rotary Actuator Table CNC
Accu-Fab Linear Robotic Rotary Table CNC. If for any reason you are unsatisified. Item can be returned within 2 weeks in condition received for refund of purchase price. Included In Sale: Accu-Fab Linear Robotic Rotary Table CNC(1) Accu-Fab Linear Robotic Rotary Table Overall Dimensions: 8 x 7 x 4 Inches Table: 4 x 4 15-20 Degrees Rotation. 1) Accu-web Drive Module Model# AFS5534. 1) MCG Motor Model# 2181-ME3044. I accept Paypal. Money Orders or Checks. I ship by UPS or USPS.
|
|
|
Aerotech XY Table 6" Travel Yaskawa AC Servo Motors ATS200 ES14622 Stage CNC
Aerotech XY Table 6" Travel Yaskawa AC Servo Motors ATS200 ES14622 Stage CNC Nice large precision XY table with Yaskawa AC Servo motors. These Aerotech tables are the best! Well sealed and very well made. Note the bolts to hook the tables together are not included. Also there is a dowel pin that is broken off(2nd to last pic) It was apparently how the XY table was mounted to a robot or something originally and shouldn't be a problem if just ground flat. This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with Fedex Ground. AK. HI PR to pay actual shipping. We care enough to take multiple pictures of our items for sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual ... moreitem for sale. Sold with a 14 day not DOA satisfaction guarantee. ZM2_gsrx_vers_486(GS 6.5.1(486)
|
|
|
Rotary Table CNC Tsudakoma Model RNCV-301R2
Tsudakoma Model RNCV-301R2 CNC Rotary Table Specifications Turntable Diameter: 12.5" Table Height- Horizontal Position: 8.6" Table Center Height- Vertical Position: 8.3" Center Bore Diameter: 1.57" Spindle Hole Diameter: 1.65" Number of Worm Wheel Teeth: 72, Table Rotation Angle per One Pulse: 0.001 deg, Table Rotation Speed: 11 RPM, Clamp Method: Hydraulic, Approximate Weight: 440 lbs, Table being sold As Is. Buyer is responsible for shipping. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scotttt@assetexchangeinc.com
|
|
|
SMW CNC INDEXER / TURN TABLE MODEL RT-3J W/CONTROLS SYSTEM 30
SMW INDEXER MODEL RT-3J W/CONTROLS SYSTEM 30 BASE PLATE 8" X 16" X 1" THICK 110 V ALL ITEMS SOLD AS IS. WHERE IS stock#2367 BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST.
|
|
|
Romaxx CNC 3 axis Router Machine table 24X36 ballscrew With Extras Made in USA
Purchased new around a year and a half and ago and used less than eight hours use. Specifications can be found at http:romaxxcncrouters.com/romaxx-cnc-router-wd-1 extras include Computer and Monitor Cast Aluminum Bed Dust Shoe(has a repair made see pic 3 but is sound) Router Mount Porter Cable 892 Router MPG Handwheel Mach 3 Software Loaded Video of machine running
|
|
|
Parker Daedal Precision 10" motorized rotary CNC stage/table 21004RTMSH2C2M1E1T2
Precision 10" Parker Daedal motorized rotary stage/table with encoder feedback. Model 21004RTMSH2C2M1E1T2. Create a 3D scanner with the SICK LMS-200 I have listed. The 200RT Series Rotary Tables are designed for precise motor-driven rotary positioning and indexing. These tables are designed to function independently or in conjunction with linear tables used for precision automation applications. Their low profile design minimizes stack height in multi-axis configurations and enables them to fit in many places where other motorized rotary devices cannot. Highly repeatable indexing(12 arc sec. Load capacities to 200 lbs. 360 degrees continuous travel, Performance tested worm gear drive, Selectable table sizes and drive ratio, Dual race angular contact support bearing Rotary Positioners ~ Featured Accuracy Actuation Feature Length(mm) Max. ... moreLoad(kg) Repeatability Travel(mm) Width(mm) Worm Gear Drive RT Series Precision Rotary Tables 2 arc-min Worm Drive Smooth Rotary Motion 127 to 254 90 12 arc-sec 360 ° 127 to 254(5 sizes) x Gear Ratio 45:1. Magnetic home switches. Motor Coupling 0.25 in bore. Helix, aluminum. Motor Mount 23 frame size.
|
|
|
Troyke 10" cnc rotary table with tailstock
Gentlemen(and very improbably. Ladies: Up for sale is one 10" Troyke NC-10-BLH360 CNC rotary table and its matching 7" tailstock. The table is powered by an Electrocraft E727-38-006 1.1HP(2000oz-in max) with 14V/krpm tachometer. 500ppc(2000ppr in quadrature) encoder, and takes 80V for 2400rpm(no load) I'm driving it with an AMC 30A8 servo amplifier(not included, but I could be persuaded to throw one in. I have complete specs on the motor from Electrocraft. Drawings(original blueprints) of this table, and since I've hooked it up to my machine, I can provide the information you'll need to do the same. The tailstock is not a Troyke. But is matched to the exact 7" center of the table, and is a superb specimen. Both table and tailstock are keyed for a 11/16" T-slot(IIRC- I'll have to measure, if you need to ... moreknow. The unit. Though not obvious from the pictures, is still connected to my machine and in fully operational condition. I've just moved it off my table to make room for a job I'm doing right now. Inside, the worm and gear are in excellent condition and it is full of fresh oil, but the outside paint job or(lack thereof) admittedly looks like crap. I could paint it up, but then I'd have to double the price: The table is extremely rugged and rigid. The load capacity of this table is somewhere in the neighbourhood of 300lbs(obviously. At 90 degrees) so it will easily accommodate a smaller Haas 160 or their 5C indexer if you want a 5th axis. I have recently bought a smaller table that serves my purposes and doesn't weigh down my machine. The table is 200lbs(estimated) The tailstock is at least 30. Figure 275lbs for shipping, and I will ship by freight to anywhere. Local pickup is also possible. Please inquire. But serious inquiries only. Torin.
|
|
|
SMW 225VN CNC Rotary Table For Fadal. (4th axis)
SMW 225VN CNC Rotary Table Re-manufactured by SMW in 2009 Good working condition. Faceplate Dia 8.8(in) Spindle nose taper A-6. Through hole accuracy +/10(sec) Repeatability 2(sec) Spindle run-out.0004(in) Weight w/ motor 210(lbs) Gear ratio to motor 180:1. Wormwheel ratio 72:1. Brake torque 220(ft-lbs) Load capacity 160(lbs) Workpiece Loads. Vertical 160(lbs) Horizontal 315(lbs) Machining forces. Radial torque 220(ft-lbs) Radial faceplate load center line 4200(lbs) Radial load 12 inch from faceplate 1600(lbs) Axial thrust 2450(lbs)
|
|
|
Thermwood CNC Router 4'x8' Table, 10HP Spindle, Vacuum, eCabinets Ready, 2004!
This Thermwood Model CS40 CNC Router comes out of a small cabinet shop in Southern California. The machine includes a 10HP Spindle with 5 Station Auto Tool Changer. An 18HP Vacuum Pump as well as a nice multibag dust collection system. One of the best benefits of the Thermwood brand is the eCabinet Systems Software that is included. ECab is a custom cabinet design program powerful enough to drive a custom cabinet business from design to fabrication. This type of software can cost up to $30,000 when purchased independently. The specifics are as follows: Used Thermwood Model C40 CNC Router New in 2004 4’x8’ Moving Table 10HP HSD Spindle with Auto Tool Changer 18HP Vacuum Pump 10HP Dust Collector. ECabinets Systems Software Ready. Location: Southern California. For more info call us at 800-394-1128
|
|
|
CNC TABLE XY 14"x 14" TRI SIGMA CORPORATION 21808600 21-8312-06
CNC TABLE XY 14"x 14" TRI SIGMA CORPORATION 21808600 21-8312-06 This came out of an plant closing. This auction is for a CNC TABLE XY 14"x 14" TRI SIGMA CORPORATION 21808600 21-8312-06. This unit was still hooked to the XMR laser we purchased for parts. This table was used to position the laser in the cabinet. It looks to be in great shape. We are including 2 complete controllers as they appear to be the same but we only have 1 table. If you have any questions at all please feel free to ask. 14"x14" XY table with 2 stepper motors and wires. 24"x36" Steel mounting table. EG&G Torque Systems MTE2610-115EF Motion Control Devices M21-DM-1000-5-LD-37A-S. Tri Sigma Corporation 8809005. Copley Controls 303 x 2. Tri Sigma Corporation 8809005. 8809010,21407500. Tri Sigma Corporation Model 8312 21-8312-06. ... moreTri Sigma Corporation Model 8312 21-8312-06. TERMS: Items are sold AS-IS and what you see is what you get Please check the pictures to verify anything stated in the ad. There is a $20 handling charge included with this auction to cover packaging and time. Payment is expected within 48 Hours of sale unless something else is arranged. We ship Fedex USPS or UPS domestically. Bax Global or USPS internationally. Please ask questions before the end of the auction. ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ClicPic
|
|
|
CHUO SEIKI CNC PRECISION XYZ TABLE LS-621 , LD-621 (31-F)
CHUO SEIKI CNC PRECISION XYZ TABLE LS-621. LD-621 Items used. In good working condition. 30 days warranty Shipping to worldwide by air. Takes about 1 2 to 1 8 days. Payment by paypal. Other payment pls check with me. Thanks for viewing& Good Luck. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Used Preco PRC CNC Laser, 4’x8’ Table, 1000W Laser, Koolant Kooler, New in 2004
Used Preco PRC Laser New in 2004 1000 Watt Laser 50”x100” Bed 12” of Travel on the Z axis Autofocus Windows-Based CNC Control w/ Preco Software Closed Loop Koolant-Kooler Chiller System Currently in Plant and still Under Power Excellent Condition Location: Chicago Video Link below http:youtu.be/3hjQmWFB53I
|
|
|
Wendespanner Peiseler Typ : EW 1000 CNC rotary table & Wheel Pulse
Wendespanner Peiseler Typ: EW 1000 CNC rotary table& Wheel Pulse used but in perfact work condition because the Equipment is so heavy so prefer shipping by ship Please don’t hesitate to call or email with any questions: Email: yinninghong@126.com Mobile: +86-013761794175 skype: alexzhao8686 Check out our other items in my store! Add Us To your Ebay Favourites! 90 DAY GUARANTEE ON ALL OUR ITEMS TO KEEP OUR PRICES COMPETITIVE. ALL OF OUR ITEMS NEARLY LOWEST PRICE YOU CAN FIND, AND YOU CAN GIVE US OFFER THAT YOU CAN ACCEPT. WHEN THE PARCEL ARRIVED， PLS CHECK IT OUT CLEARLY, MAKE SURE THE PACKAGE IS OK AND THE RIGHT ITEMS， THEN SIGN YOUR NAME UP， OR THE BUYER SHOULD TAKE THE RESPOSIBILITY THERE IS COMBINED POSTAGE FOR MULITPUL PURCHASES. ALL OUR ITEMS ARE SENT BY DHL.TNT,EMS OR OTHER WAYS ACCORDING TO YOUR ADDRESS OR THE ITEMS WEIGHT. ALL ... moreOUR ITEMS ARE SENT AS DESCRIBED PLEASE INSPECT YOUR GOODS FOR TRANSIT DAMAGE BEFORE ACCEPTING DELIVERY; WE WILL NOT BE RESPONSIBLE FOR RETURN COSTS IF THE ITEM IS ACCEPTED UNCHECKED. ITEMS THAT ARE NOT ACCPETABLE SHOULD BE REFUSED AT POINT OF DELIVERY) WE THINK THAT THE LOW STARTING PRICE REFLECTS THE POSTAGE/ ADMINISTRATION CHARGES. ANY QUESTIONS PLEASE GIVE ME A EMAIL OR SKYPE ME: ALEXZHAO8686. AS SOON AS I RECEIVED YOUR EMAIL. I WILL REPLY AT THE FIRST TIME. THANKS FOR LOOKING AND HAPPY BIDDING-
|
|
|
Aerotech Accudex Linear Slide. cnc XY table stage.Precision Ballscrew Positioner
This is an Accudex xy linear slide. It is very heavy. This item is used. It could use some cleaning. The slide moves smoothly and appears to be in perfect working condition. The table is 14" x 9" has threaded mounting holes This add was brief. If you have any questions I will be glad to answer them. Buyer is responsible for shipping and handling costs. Item can be picked up! Thank you 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13f168980b6-0x106-
|
|
|
12" Troyke Diameter Index Rotary Table Roto Indexer CNC
Our internal inventory number on this product is 2M# 15-D-2-E. PLEASE NOTE: To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! You won't want to miss any of our $.01 NO RESERVE auctions! OR. DESCRIPTION: You are bidding on a TROYKE. 12" Diam. Rotary Index Table/ Roto Indexer. Type: AH 12. S/N: 225211. Dimensions: 16" x 12.5" x 4.75" WEIGHT: app. 120 Lbs. Cosmetic Condition Rating: 3- FAIR Note: This is solely a cosmetic description of the item. This part was pulled from a working machine. And is being sold in good working condition unless otherwise stated! 1) Very Poor 2) Poor 3) Fair 4) Good 5) Like New Condition*NOTE* Top Bidder to pay $25.00 Skidding& Handling + ACTUAL Freight COSTS ... moreon app. 170 Lbs from 49534! You can check freightquote.com for app shipping rate if needed before purcahsing! On Payments under $250.00 we accept Paypal. Company check or certified Check. For payments over $250.00 we prefer certified funds(Cashiers Check or wire transfer) But also accept Paypal and company checks(non certified checks held up to 10 business days for clearance) Good Luck& Good Bidding! OUR RETURN POLICY. We are a WHOLESALER of all types industrial equipment! Usually when you purchase items from us you will be getting anywhere from a 25% 50% discount from what fair market value would be from a used machinery dealer. We will gladly stand behind what we sell. But because of the LOW MARGINS we work with and extraordinary deals we pass on, we can not offer partial refunds on ANY SALES! We gladly offer a 30 day NO QUESTIONS ASKED return priviledge. This is a 100% refund of your WINNING EBAY BID, you are responsible for ALL Packaging and Shipping costs! Good Luck. INTERNATIONAL BUYERS READ BEFORE PURCHASING! Our policies have changed: All buyers(except for those in Canada) must send via Paypal a $100.00 deposit upon making purchase. This amount will be applied to th
|
|
|
laser Cutter engraver 40 watt see video CNC table + dell computer
Laser Cutter engraver 40 watt see video CNC table + Dell GX280 Computer=P4 3 GHZ+2 GB RAM+1 TB HDD+XP-3+DVD. Does not include Monitor also has Moshisoft CD Please see the Video The 40w Laser works and the CNC motors function. I cant get the software to work so I am selling it as is with working computer. I bought this new and only put about 15 minutes of laser cutting time on the tube. this item is for Local pickup only. NJ Egg Harbor Township
|
|
|
6"GIDDINGS & LEWIS CNC 4-AXIS DUAL-PALLET TABLE-TYPE HORZ. BORING MILL M# MC60
Quote# Sam 232. 6" GIDDINGS& LEWIS CNC 4-AXIS DUAL-PALLET TABLE-TYPE HORIZONTAL BORING MILL/MACHINING CENTER New 1993. Serial No 450-287-92, Model MC60, Series 450. EQUIPPED WITH: G&L 8000M Numeripath CNC Control with 1000' Part Program Storage& Vertically Adjustable Pendant 80-Station Automatic Toolchanger Built-In Positioning Rotary Table(2) 60" x 60" Heavy-Duty Pallets Mounted On Heavy-Duty Dual Station Flow-Thru Automatic Workchanger w/2) Seperate Flow-Thru Pallet Stands Replaceable Hardened Ways On Column. Bed And Saddle Way Covers On Front And Rear Of Bed And Saddle Flood Coolant Thru-Spindle(30 PSI. 4- 5 GPM) Mist Coolant- Chip Conveyor& Elevator Renishaw OMM Probe CATALOGUE SPECIFICATIONS: Spindle Diameter. Main. 6" Spindle Taper. 50 ANSI Spindle Travel. Z-Axis) 36" Pallet Cross Travel(X-Axis) ... more96" Spindle-Head Vertical Travel(Y-Axis) 74" Saddle In/Out Travel(W-Axis) 43" Bed Length. 96" Pallet Working Surface. W x L. 60" x 60" Pallet Shuttle Weight Capacity. 20000 LBS Rotary Table Weight Capacity. 30000 LBS Rotary Table Number of Positons. 360000!NEW PAGE- Rotary Table Torque. 30000 FT/LB Rotary Table Rotatinal Speed. 1 RPM Spindle Speeds. Range. 12 to 2500 RPM Feeds Range(Z-Axis) 010 to 150 IPM Feeds Range(Y-Axis) 010 to 150 IPM Power Rapid Traverse. Y Axis. 450 IPM Power Rapid Traverse. Z Axis. 300 IPM Main Motor. Horsepower. 50 HP Electrical System. 460/3/60 NOTE: Machine Appears To Be In Very Good Condition And Can Be Shown In Plant For A Short Period Of Time. PRICE: BEFORE REMOVAL OHIO(CLEVELAND) $135.000.00 PRICE: AFTER REMOVAL OUR WAREHOUSE. $179.500.00. All machines/equipment subject to prior sell.
|
|
|
EMCO F1, PCMill 50 & 55 CNC Mill Table Studs, 1-5/16" Long 0605
Description: EMCO F1. PCMill 50& 55 CNC Mill Table Studs. 1-5/16"L. Three sets. You can never have enough of these. Condition: Very good. Shipping: Charges will be a flat rate shipped anywhere in the US; No where else. I ship from Ann Arbor. Michigan 48103. Returns: Policy Updated 2012 I offer a 30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a mistake in the listing. I offer a full money back refund(with shipping both ways) but you must return the undamaged item to me. I do not offer partial refunds and or replacements; I only offer my refund policy as stated above. In the event of loss or damage in shipping(that is out of my control) You agree in advance to cooperate so I can file an insurance claim for the loss or damage and issue a ... morerefund to you. If you win this auction. You will be expected to execute a paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately!
|
|
 |