|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Melville, United States Monroe Fluid Technology Prime Cut 5 Gal Pail Cutting & Grinding Fluid Water Soluble, For CNC Milling, Drilling, Tapping, Turning
![]()
Buy It Now
Free Shipping Condition: New Location: Minooka, United States Store Categories. Click to close full size. For warranty information. TRIM MQLTM 10005G Cutting Oil. 5 gal, Bucket. TRIM. Item Specifics. Item. Min Quantity ... moreLubrication Fluid. Type. MQL1000. Application. All Micro Lube and Micro Mist Systems Sawing. Drilling, Tapping, Reaming and Milling, Also Situations Where It Is Impractical To Use A Micro Lubrication Applicator Mql1000 May Be Manually Applied To The Tool Or The Work Piece. Color. Yellow. Container Type. Bucket. Features. Environmentally Friendly. Renewable Resource Based, Promotes Superior Finish and Tool Life and Is Compatible With All Materials, Very High Levels Of Lubricity With Even, Minimum Quantities Of Material At The Point Of Cut For High Material Removal Rates. Flash Point(F) 385. Item. Cutting Oil. Size. 5 gal. Type. MQL1000. Fragrance. Mild Odor. Characteristics. Vegetable Ester Based. No Chlorine, Sulfur or Mineral Oil. Standards. Viscosity. 63.3 SUS@ 210 Degrees F. 347 SUS@ 100 Degrees F. Specific Gravity. 1.0. Fluid Type. MQL1000. Vegetable Ester Based, Chlorine-Free, Sulfur, or Mineral Oil. Flash Point. 385 Degrees F. Cutting Fluid Sub-Category. Cutting Oils. Package Quantity. 1. Shipping A $5 shipping and handling fee is charged on orders totaling less than $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. UPS is our primary parcel carrier and we use a variety of carriers for LTL shipments. Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Zoro only accepts orders for shipments within the continental US. Orders to international destinations. Alaska and Hawaii will not be processed. Zoro does not ship to PO Box addresses. Our items ship directly from the manufacturer and usually will be shipped in the handling time stated for each item. Exped
Buy It Now
$15.00 Shipping Condition: New Location: Hebron, United States Specifications： Type: Hot and cold cutter Power: 280W Voltage: 110V / 60Hz Knife width: 110mm Effective cutting width: within 100mm /4 inch Cutting length: ... more1-99999 mm /0.04-3937inch Cutting speed: 60-120 pcs / min (take 50mm as an example) Blade maximum temperature: 350 ° C Shell Material: Steel Blade Material: Steel Package Size: 55*42*39cm/21.65*16.5*15.4inch Gross Weight: 22.5kg/49.6lbs Net Weight: 20kg/44lbs The package includes: 1X Automatic Tape Cutting Machine 1X User Manual 1 X Power Cord Other Accessories for Assembly.
Buy It Now
$10.95 Shipping Condition: Used Location: Tullahoma, United States Drill is in good, used condition. Insert Type: SOMX 05 .
Buy It Now
Free Shipping Condition: New Location: Whippany, United States ✨ Efficient: Machining hardness reach HRC70, for the most work,rotary burr set it can replace petiole small wheel. Quantity 20PCS. ✨ Double Cut Head: ... moreDouble-cut style has rows of cutting teeth cut in two intersecting direction s for fast material removal and a rougher finish.
$13.60 Shipping Condition: Used Location: Royal Oak, United States
Buy It Now
Free Shipping Condition: New Location: Melville, United States Tap Magic Tap Magic EP-Xtra 1 Pt Bottle Cutting & Tapping Fluid Semisynthetic, For Boring, Broaching, Drilling, Engraving, Facing, Milling, Reaming, Sawing, ... moreThreading, Turning.
Buy It Now
$80.00 Shipping Condition: New Location: Belen, United States The Duplicator is very easy to operate and very forgiving. you just can't make mistakes if you take it at a moderate pace. See our 'Model Two' on our ... morewebsite. CARVING DUPLICATOR. This is an amazing tool that will allow you to carve identical pieces from an original, and do it efficiently and quickly.
Buy It Now
$5.99 Shipping Condition: New Location: Thompson, United States TAP-MAGIC CUTTING FLUID. BOTTLE WITH SPOUT TOP. MACHINABILITY AND TOOL LIFE. IMPROVE SURFACE FINISH.
Buy It Now
Free Shipping Condition: New Location: Melville, United States Made in USA. Anchorlube G-771 Water Soluble Cutting Compound. Cutting fluids are used for cooling and lubricating cutting tools. These fluids are engineered ... moreto improve tool life, material removal rate and surface finish. Water soluble fluids blend oil with emulsifiers and additives to create an oil-based coolant to be diluted with water. These fluids provide excellent lubricity and an increased cooling ability over straight oils. Useful for Broaching, Counterboring, Drawing, Drilling, Engraving, Fly-Cutting, Hole Extruding, Milling, Piercing, Punching, Sawing, Seat Forming, Spot Facing, Tapping. 1 Gallon Bottle of Cutting Compound Yields Approximately 4.9 Gallons Cutting Fluid.
Buy It Now
Free Shipping Condition: New Location: Ukraine Are you looking for a new sloyd knife to cut out your woodworking projects?. It has a straight blade a bit rounded on the top to allow comfortable cutting ... moreand roughing wood out. The carbon steel blade of the knife is razor sharp and ready to use right out of the box.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States It is 55 Degree & 60 Degree Thread / Screw Pitch Gauge gage with lock up device. - Marked on the feeler gauge. - US thread, also known as UN thread, has ... morea profile angle of 60 and a flattening height of H / 8, which is different from Whiteworth thread profile (profile angle of 55 and flattening height of H / 6).
Buy It Now
Free Shipping Condition: New Location: Carrollton, United States Tap Magic 30004P ProTap Cutting Fluid, 4 oz. Size 4 ounces. Condition is New. Shipped with USPS Ground Advantage.
Buy It Now
Free Shipping Condition: New Location: Bennington, United States A proprietary aluminum oxide grain combination yields fast, burr free cutting with long life. Suitable for cutting stainless steel, carbon steel, aluminum, ... morecopper, plastic, and more. Reinforced with 2 full fiberglass sheets for safety.
Buy It Now
$10.95 Shipping Condition: Used Location: Tullahoma, United States The drill is in great condition and includes a lightly used tip.
Buy It Now
Free Shipping Condition: New Location: Davenport, United States Mild Steel Blade. Concrete Saws. Blade Dia.: 14 In. (Supplied with a 14" (355mm) blade. Capable of fitting a 15" (380mm) mild steel cutting blade). Square ... moreTube at 90° (Mild Steel): 5 x 5 In. Mild Steel Plate (Max Thickness): 1/2 In.
Buy It Now
Free Shipping Condition: Used Location: Perry Hall, United States
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Usage: CNC milling machine. Material: HSS. 4x 4 Flutes End Mill Cutter. 4 Flute End Mill Cutter.
Buy It Now
Free Shipping Condition: New Location: Fresno, United States RELTON 04Z-NRT Rapid Tap Cutting and Drilling Fluid. 4 oz. Product Description: Does not contain methyl chloroform(1. 1, 1trichloroethane) or other ozone-depleting ... moresubstances. Non-toxic and nonflammable. Improves surface finish. Machining accuracy and tool life. Welcome to FastoolNow on eBay! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. Combined Shipping To save you some money. We offer combined shipping on multiple eBay purchases of different items made within a short period of time. In order to receive combined shipping on different items, please commit to Buy It Now on eBay, but wait to pay until FastoolNow sends you a combined invoice with a revised shipping total. Payment We accept the following forms of payment. PayPal Sales Tax For shipments to Michigan addresses. We are required by State law to collect 6% Sales Tax. Customer Service We accept returns up to 14 days after you receive your order. In order for us to be able to accept your return. Your items must be in good condition, and be in the original packaging. Please note that shipping charges are not refundable and a restock fee may apply to special orders. When you receive your shipment, please inspect the packaging carefully. Note any damage to the package with the driver at the time of delivery. Please provide up to 7-10 days for returns to be inspected once we receive it. Customer is responsible for return freight. Of course, customer satisfaction is always our goal- so don't hesitate to call us at 1-888-654-8898
Buy It Now
Free Shipping Condition: New Location: Ontario, United States 1 set of torch handle. Constructed with high strength alloy, heavy duty stainless steel and durable brass. Capacity: cutting up to 200mm (7.9");. 1 piece ... morecutting tip. With one 1-101 cutting nozzle.
Buy It Now
$13.98 Shipping Condition: New Location: Falls City, United States Due to the cutting process, length may vary +/- 1/16in and sharp edges may be present. Exercise caution when handling. Unless you specify otherwise, this ... moreitem will be shear cut. A sheared cut is acceptable for most applications, however a saw cut is more accurate and leaves a better edge.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States VEVOR 16" Electric Concrete Saw Wet/Dry Saw Cutter with Water Pump and Blade. VEVOR Electric Concrete Vibrator 1500W 14-3/4 feet Poker to Remove Air Bubbles. ... moreVEVOR 14" Concrete Cut off Saw Wet Dry Concrete Saw Cutter w/ Water Pump & Blade.
Buy It Now
Free Shipping Condition: New Location: United States 4 Flutes, Single End, Helix Angle: 30°, TiALN coated. TiALN Coated for improved performance and tool life in harder materials or high temperature applications. ... more1pc 4 Flute 1/4" x 1-1/2" x 4" End Mill.
Buy It Now
Free Shipping Condition: New Location: Colbert, United States Up for your consideration is new Uniweld shade 5 flip up round lens gas cutting/welding torch goggles. This item is ANSI rated and good for gas cutting ... moreand welding as well as for use with plasma cutters only.
Buy It Now
$7.75 Shipping Condition: New Location: Falls City, United States Due to the cutting process, length may vary +/- 1/16in and sharp edges may be present. Exercise caution when handling.
Buy It Now
$7.75 Shipping Condition: New Location: Falls City, United States Due to the cutting process, length may vary +/- 1/16in and sharp edges may be present. Exercise caution when handling.
Buy It Now
Free Shipping Condition: New Location: United States PRECISE CUTTING - The square slot cutter oscillating tool is designed to cut square hold. Our square slot cutter has two sizes for you to choose from ... moresquare and rectangle. And the drywall outlet cutout can quickly and easily cut into single or double gang boxes, which ensures accurate cutting.
Buy It Now
Free Shipping Condition: New Location: North Bergen, United States Decking Straightening Tool Kit Deck Board Bender Straightener Bending 1.5"-3.5". Brake Line Flaring Kit For Steel / Copper Tube, Double Flare Tool Single/ ... moreBubble. HVLP Spray Gun Set Cup Air Regulator & Auto Maintenance Paint Basecoat Clearcoat.
Buy It Now
Free Shipping Condition: New Location: Houston, United States White Aluminum Oxide features high hardness, and this highly refined ingredients will not contaminate stainless steel. High Economic Efficiency. Enjoy ... morea long life and high-quality output with SATC 4-1/2 x. 040 x 7/8 in Right Angle Type 1 Cut Off Wheels on your grinder.
Buy It Now
$29.13 Shipping Condition: New Location: SMETHWICK, United Kingdom SIZES AVAILABLE : 8mm to 40mm. DIAM = 30mm. DIAM = 40mm. DIAM = 15mm. DIAM = 20mm. DIAM = 25mm. DIAM = 35mm. DIAM = 10mm.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Our upgrade new plasma cutter PLC55X is IGBT technogy, not MOSFET. IGBT machine is far superior and more stable than the MOSFET machine. IGBT technology ... morecan effectively save 50% of energy. High frequency, DC output, Advanced inverter plasma cutter technology.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Packing List: 1* Ultrasonic Spot Welder 1* Welding Head (Random Gift) .
Buy It Now
Free Shipping Condition: New Location: Walton, United States VICTOR TYPE WELDING& CUTTING KIT CONDITION: BRAND NEW ITEM NO# UW-1515 w/o TANK This package includes everything shown in the pictures below: oxygen ... moreand acetylene regulators torch handle heating nozzle cutting attachment 15-ft twin line hoses tip cleaner. Goggle, spanner, lighter Please Check the Model of the Inlet Nut Below before you order
$10.75 Shipping Condition: Used Location: Ellington, United States Machine Levelers. Plug Gages, Parallels. Machinists Goodies. Lot of Assorted.
Buy It Now
Free Shipping Condition: New Location: Hesperia, United States Diamond Dust Drill Bits Kit Hole Cutter Set Power Drill Hole Cutter Bits Set. Cutter Drill Bits Sizes: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, ... more32mm. Suitable for drilling holes on Glass, Tiles, Blocks, Fiber Glass, Porcelain, Ceramic, Slate Marble, Granite Stone and Quartz.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Plasma consumables. plasma cutting supplies. Thermal Dynamics SL60 SL100. Cutting Machine. Fiber Cutting Parts. Powermax 30. The real color of the item ... moremay be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Buy It Now
$7.99 Shipping Condition: New Location: Falls City, United States Due to the cutting process, length may vary +/- 1/16in and sharp edges may be present. Exercise caution when handling.
Buy It Now
Free Shipping Condition: New Location: Denver, United States PRECISE CUTTING - The square slot cutter oscillating tool is designed to cut square hold. Our square slot cutter has two sizes for you to choose from ... moresquare and rectangle. And the drywall outlet cutout can quickly and easily cut into single or double gang boxes, which ensures accurate cutting.
Buy It Now
Free Shipping Condition: New Location: Bennington, United States Grit: 60. Tough aluminum oxide abrasive gives quick and clean cuts while extending tool life. Designed for use with angle grinders up to 13,300 RPM. The ... morethin cutting profile minimizes material loss and maximizes cutting speed.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 4T Trigger interlock mode eliminates the need to hold the gun trigger while cutting. Better cutting quality and longer consumable life. The pilot arc ... moreIPT40 torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States This is a Harris Oxygen-Acetylene Kit. It is still in the original unopened package. It also comes with the original box and instructions. It is a complete ... morekit for gas welding. Brazing and flame cutting. The box has the original shipping label on it, and it is dated 1982. If you have any questions please ask prior to bidding. I only ship within the U.S. Please pay within 3 days from auctions end, by Paypal only. I do not accept returns so please be sure of your bid before placing it. Thank you. Posted with
Buy It Now
Free Shipping Condition: New Location: United States CNC 3018 PRO. If you change the spindle to a module,then also can carve the kraft paper, wood, leather(wallet), bamboo, rubber. Q: What materials can ... morethe milling cutter generally engrave or cut?. 1x 4G USB flash drive include the english user manual & GRBL software.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Power: 4000W. Magnesium alloy head shell, 4000W high power. 1 x Wall Slotting Machine. 5 x 121mm Saw Blade. Cutting Depth: 0-37mm. 1 x Vacuum Cleaner ... moreAdapter. 1 x Water Pump. The remote areas will take longer.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States For continuous cutting, squeeze the trigger switch then press the lock-on button on the side of the handle. Loosen the three hex head bolts, firmly grip ... morethe cutter head and twist it to the desired position then tighten the three hex bolts.
Buy It Now
Free Shipping Condition: New Location: Charlotte, United States ANSI TESTED BY 3RD PARTY (Unique to KwikSafety Products) - The EAGLE EYES welding goggle(s) are quality checked & thoroughly tested by a 3rd party accredited ... moretesting lab & is in full compliance with ANSI Z87.1 (Personal Eye & Face Protection Devices).
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Material: Tungsten Steel. This set is a professional grinding heads for teeth drill machine, necessary tool for polishing and smoothing. not have a now?. ... moreEasy to and, directly wash it from water and it through alchhol, save you much.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States RYOBI introduces the 4-1/2 in. Aluminum oxide build for fast material removal and longer life. Will fit most 4-1/2 in. angle grinders. These Cutting Wheels ... moreare a consumable item. Includes: A01302 (3) 4-1/2 in.
Buy It Now
$7.99 Shipping Condition: New Location: Falls City, United States Due to the cutting process, length may vary +/- 1/16in and sharp edges may be present. Exercise caution when handling.
Buy It Now
$7.75 Shipping Condition: New Location: Falls City, United States Due to the cutting process, length may vary +/- 1/16in and sharp edges may be present. Exercise caution when handling.
Buy It Now
$16.40 Shipping Condition: New Location: La Pine, United States Gas cutting circle guide for Victor cutting torches. - Quickly cut radius corners of your work piece.
Buy It Now
Free Shipping Condition: New Location: Houston, United States White fused alumina features high hardness, and this highly refine d ingredients will not contaminate stainless steel. Enjoy a long life and high-quality ... moreoutput with SATC 4-1/2" x 0.04" x 7/8" Right Angle Type 41 Cut Off Wheels on your grinder.
Buy It Now
$7.75 Shipping Condition: New Location: Falls City, United States Due to the cutting process, length may vary +/- 1/16in and sharp edges may be present. Exercise caution when handling.
Buy It Now
Free Shipping Condition: New Location: Woodland, United States Handle a variety of projects with this versatile lathe tool set! The lathe tool set includes a cranked turning/facing tool, a cranked facing tool, a cranked ... moreknife tool, a rough boring tool, an inside corner tool and a recessing tool.
Buy It Now
$12.99 Shipping Condition: New Location: Falls City, United States Due to the cutting process, length may vary +/- 1/16in and sharp edges may be present. Exercise caution when handling.
Buy It Now
Free Shipping Condition: New Location: Walton, United States YESWELDER 24pcs Plasma Cutting Torch Tip Electrode of IPT40,Consumables Sets for YESWELDER CUT-65DS Plasma Cutter.
Buy It Now
Free Shipping Condition: New Location: Houston, United States Leading the industry in scrap and demolition supplies, we can provide you with all of your torching, welding, and safety needs. Repair Parts. Warning: ... moreThese parts must be installed by a qualified technician.
Buy It Now
Free Shipping Condition: New Location: Williston, United States 3/4" Hole Dozer. 7/8" Hole Dozer. 1" Hole Dozer. 1 1/8" Hole Dozer. 1 1/4" Hole Dozer. 1 3/8" Hole Dozer. 1 1/2" Hole Dozer.
Buy It Now
Free Shipping Condition: New Location: United States Processing hardness up to HRA85. Shank length：35mm. HIGH QUALITY - Good processing quality, high finish. Can be processed into a variety of high-precision ... moreshape mold cavity. Single-Flute Head:Double-cut style design to reduce bit stress,better than double flutes design in cutting high hardness material.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Hypertherm Part # 851511. Plasma Power Source: Powermax45 XP.
Buy It Now
Free Shipping Condition: New Location: Walnut, United States Enjo y a long life and high-quality output with SATC 6" x 0.045" x 7/8" Right Angle Type 1 Cut Off Wheels on your grinder. White Aluminum Oxide features ... morehigh hardness, and this highly refined ingredients will not contaminate stainless steel.
|
|
|
|
VINTAGE 6 PC MILLERS FALLS Co. CARVING TOOL SET No. 106 c NEAR MINT!
Up for bid is this VINTAGE"MILLERS FALLS Co" 6 pc CARVING TOOL SET No. 106c. Each tool averages about 6 1/4" long. All in near mint condition.
|
|
|
(2)Vintage Wood Wooden Mallet Hammer Woodworking Chiseling Carving PrimitiveTool
Up for auction are these(2) Vintage Wooden Mallets. Both are in good used condition. Smaller one is 11 1/2" long& features metal bands around head. Has inserts on both ends(but not sure what material it is) Head measures 5"x 2 1/2" Weighs just over 1lb. Larger mallet measures 13" long with the head measuring 5"x 3" One end of head is rounded. The other is flatter(from use) Weighs just over 1 1/2lbs. Both handles are in good condition, no cracks.Thanks for looking
|
|
|
VINTAGE GENERAL 4 PIECE WOOD HANDLE CARVING TOOL SET
THIS IS A VINTAGE SET OF GENERAL CARVING TOOLS. THERE ARE ONLY 4 TOOLS THAT ARE LEFT IN THIS SET. THE SET DOES COME WITH THE PACKAGE. BUT THE PACKAGE DOES SHOW AGE. THE TOOLS LOOK TO BE IN GOOD CONDITION. THE NUMBER ON THE PACKAGE IS 1290 GENERAL. PLEASE LOOK AT ALL OF THE PICTURES TO MAKE SURE THAT YOU WILL BE HAPPY WITH THIS ITEM. PLEASE LEAVE FEEDBACK AFTER YOU RECEIVE YOUR ITEM AND THEN I WILL DO THE SAME. THANK YOU. Posted with
|
|
|
***MUST SEE***SET OF SEVEN (7) BUCK BROTHERS WOOD CARVING CHISEL SET***NICE***
THIS LISTING IS FOR A PRE-OWNED SET OF SEVEN(7) BUCK BROTHERS WOOD CARVING CHISEL SET EACH ONE IS DIFFERENT AND LOOKS LIKE THEY HAVE NEVER BEEN USED
|
|
|
FREUD CS-112 WOOD CARVING SET 12 PC
freud PROFESSIONAL WOODWORKING CARVING TOOL SET CS 112 MADE IN ITALY ITEM CONDITION: LIKE NEW- FACTORY GRIND IS COARSE- NEEDS SHARPENED& HONED BEFORE USE- WOODEN BOX HAS A DING IN LOWER LEFT CORNER
|
|
|
Terrco T-110 wood carving duplicator
YOU ARE BIDDING ON A TERRCO WOOD CARVING DUPLICATOR IN USED BUT GOOD WORKING CONDITION. THE TABLE IS NOT INCLUDED. IT WILL MOUNT ON YOUR BENCH OR TABLE. IT IS READY FOR YOU TO SET UP TO CARVE GUN STOCKS. PISTOL GRIPS, GUITAR NECKS OR BODIES, OR ANYTHING THAT IS 30" LONG, 8" DIAM. OR LESS. IT COMES WITH AN OPERATING MANUAL. I WILL HAVE TO TAKE IT APART SOME TO SHIP BUT THE MANUAL SHOWS EXCATLY WERE EVERTHING GOES. YOU CAN GO ON LINE TO TERRCO MANUFACTURING. THIS UNIT COST OVER $1.000.00 NEW.I WILL START THE BID LOW& THE SHIPPING WILL BE $60.00. WHAT ELSE CAN I SAY? ENJOY.
|
|
|
Flexcut MC100 10 Piece Deluxe Carving Tool Set Free Shipping!!!
You Are Bidding On A Pre-Owned Flexcut MC100 10 Piece Deluxe Carving Tool Set MC211#11 X 1/8" 3mm MC311#11 X 1/4" 6mm MC511#10 X 3/4" 19mm MC203#3 X 1/2" 12mm. MC403#3 X 1" 25mm. MC505#5 X 1-3/16" 30mm. MC307#7 X 11/16" 17mm. MC309#9 X 1/2" 12mm. MC245 45° X 3/16" 5mm MC460 60° X 1/2" 12mm Free Shipping! Good Condition Buyer Pays $0.00 For Shipping& Handling. No Shipping to APO/FPO. Shipping Within The 48 Continental States Only! Item's usually ship within 1 business day of payment clearing Paypal payments accepted by those with a U.S.A. Paypal account only. Also the Paypal account needs to be backed by a U.S.A. bank account or credit card. E-Checks through PayPal must clear before shipment. Payment must be received within 7 days after auction ends. Texas Residents Pay 8.25% ... moretaxes on all items You may be interested in on eBay. Our business hours are Monday thru Friday 8: 30 am- 6:00 pm CST. Shipping and questions will be taken care of during regular business hours. As a courtesy. We offer a 14 day inspection period on any item when payment for item was received no later than 5 days from the date of auction close. This is a return privilege, extended to customers who send payment on time. Late payments do not qualify for return privileges. Any refund will be for the price paid, minus shipping& handling, when item is received in"as-sent" condition. No refund will be issued for items that have been used,altered, or damaged. SOLD-AS-IS" items DO NOT qualify for the inspection period and or return policy. Powered by
|
|
|
7pc, 10 1/2" Wood Carving Firmer Chisels.
7pc 8" Wood Carving Chisels These chisels are used. But in very good condition. Some have never been used. These Chinese chisels are high quality. They look like"Two Cherries" knockoffs. See pictures. They were used at a high school woodshop. Product Description: 7 pc Wood Carving Firmer Chisels Set They measure approximately 8" long The set includes: One 1/4' One 3/8' One 1/2' One 5/8' One 3/4' One 7/8' One 1'
|
|
|
6 Piece Wood Carving Tool Set
6 Piece Wood Carving Tool Set. Some of the tools are a bit rusty. They all measure about 5' long. Please see photos for additional details and feel free to ask questions. G1 Our customer's satisfaction is our top priority. In the event you experience any problems with your order. Please contact us prior to leaving a negative or neutral feedback and we'll be sure to offer a speedy resolution to any issues that may arise. PAYMENTS o Paypal is the only method of Payment we accept. No exceptions can be made. o Payment must be received within 7 days of the auction's end. o Items left unpaid for more than 7 days are eligible to be relisted or have an unpaid item claim filed. SHIPPING o Please be aware of our shipping charges prior to placing a bid. o We offer combined shipping on up to 5 items. Please email after the auction's ... moreend requesting a revised/ combined invoice. o Requests for combined shipping will be handled on a case by case basis. It may not be possible to combine certain larger items if we feel it may jeopardize a safe arrival. o Any item sold by the Seattle Goodwill is eligible for a scheduled local pick up at our warehouse 7 days a week between the hours of 9 a.m. and 4 p.m. Please note that payment must be cleared online prior to pick up. As we are unable to accept cash or process payment at our location. Also note that a $2 handling fee will apply to each pickup order. o Local pick up items not claimed within 21 days will be relisted without notice and considered a donation. INTERNATIONAL BIDDERS o We do not ship to the following locations: Italy. France, Spain, Russia, Greece, Africa, South America, Central America, Mexico, and Asia(except Japan) o We ship internationally to Japan. United Kingdom, Germany, Australia, New Zealand, Canada and most of Mainland Europe. European customers from countries other than the U.K. and Germany will need to email us to be added prior to bidding. Customers from New Zealand will also need to email prior to bidding to be added to the list of approve
|
|
|
Wood Balsa Craft Carving Chisel Tools Set 6 piece
This is a 6 Piece Set of different shaped Wood Carving Woodworking Tools for Wood including Balsa.In a used Condition they come in their Own Original Packaging in which they were purchased.Each Measuring 16.5cms long.Postage within Australia will be $7.E/Mail Me With Any Questions.
|
|
|
Chisel Lot Addis SJ JB & Sons Sheffield England Prize Medals Carving antique
2613 Dodge Street Dubuque. IA 52001 Chisel Lot Addis SJ JB& Sons Sheffield England Prize Medals Carving antique, Addis Chisel Lot. 2 S.J. Addis 3 JB Addis& Sons Sheffield England. Prize Medals All with nice handles. Check out all the chisel lots we are listing today. We are always happy to combine shipping. Payment: Pay with your PayPal account or use your credit card through PayPal. Local pickups are welcome at our office a single $3.00 invoice charge applies however many auctions you win and pickup at one time. All in state residents within our state will be charged state and/or local sales tax at the time of checkout. Payment must be received within 10 days of the close of auction. If payment isn't received within 10 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. Shipping: Packages are usually ... moreshipped within 48 hours of payment receipt(excluding Saturday/Sunday) Shipping costs for all orders can be determined by the shipping calculator in this auction. All orders are shipped via UPS. FedEx, Speedee or USPS. International buyers, please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. We will send in a single shipment unless separate packages is needed or required. EZ Sell USA: 2613 Dodge Street Dubuque. IA 52001 Telephone: 563 543 5201. Returns: Notification of returns must be received within 3 business days of your receipt of the item. Returns will be accepted by EZ Sell usa but must be back in our office in 7 days from the receipt of your item. Refunds will be for your full winning bid plus shipping charges. Return shipping costs will not be refunded. If you have a problem we will work with you to resolve partial refunds for problems can be arranged to avoid having to return an item. Remember we strive
|
|
|
KING ARTHUR'S MERLIN MINIATURE CARVING SET 5 DISCS WORLDS SMALLEST CHAINSAW
I bought this unit in April 2012 to trim my 26 year old horse's hooves. As she was so arthritic she couldn't lift her back legs. I used it maybe 6 times before she passed away in July 2013. I used the attachment. Pictured, on the unit 98 per cent of the time. I am 125 pound female, and it allowed me to trim her front hooves, alone, as I was never strong enough to use nippers. I was able to trim the back hooves when she barely tipped them forward. Great tool. I paid $299 for it new. See YouTube for video on trimming hooves. Posted with
|
|
|
Great Neck 8 Piece Wood Lathe Turning Tool set carving chisels woodworking
Check out the photos for best condition and descriptions. WHAT YOU SEE IS WHAT YOU GET. need some clean up I don't believe these were used BUYING AS IS. I WOULD BE HAPPY TO SEND MORE PHOTOS TO EMAIL. Check out my! PLEASE READ ALL FINE PRINT AT THE BOTTOM BEFORE PLACING YOUR BID. You are buying as is. For any specifics please ask. I don't know much about this as it was part of an estate. Due to the age of most items I receive to list. They may have some wear. I do have other auctions listed. Please check them out and save on shipping. You are buying this item AS IS with no returns so please be sure before bidding. No international bidders. E-mail me with any questions BEFORE you place your bid*All items go to the highest bidder-I DO NOT end auctions early as it is against E-bay rules*Feedback is left once the buyer has left feedback ... morefor me as a way of making sure that your package has arrived safely-If you have a problem please e-mail me ASAP so we can try to resolve it.
|
|
|
General Carving Tool Set 1290 6 Pcs & Case Use as Pumpkin Carving Set Halloween
General Carving Tool Set 1290 6 Pieces and Case General Carving Tool Set 1290. Carving Tool Set with straight style handles. 6 piece set includes: Bent Large Gouge(5/16" Straight Small Gouge(5/32" Straight Square Chisel(5/16" Bent V Parting Tool(5/32" Straight Skew Chisel(5/16" Bent Square Chisel(5/16" Blades made from high grade tool steel. Blades are hand forged. Hardened and ground for lasting sharpness. Hardwood handles are both durable and eloquent. Each tool measures 6-1/4" in length. Packaged in a vinyl case for storage. Please see pictures and bid with confidence. Unless specifically specified all shipments are via United States Postal Service. I combine shipping on multiple orders so please wait for invoice when purchasing more than one item. This only applies to purchases made within 2 hours of ... morethe first purchase unless we agree to special arrangements. You will never be charged for shipping insurance! It is our obligation to get the product to you in the condition that meets your expectation! We strive for shipping and handling speed that exceeds your expectations. International buyers are responsible to pay all customs fees relevant for import. Seller will not alter customs paperwork to lower purchase price or mark item as"gift" We sell a mixture of vintage/collectible items and new retail products no longer in production. Vintage and collectible items are sold as is so please be sure to read the description closely. New items are never removed from original manufacturers packaging unless otherwise noted. Please operate vintage and collectible devices with caution! Items that operate on standard electrical power(110-120 VAC) should be closely examined for electrical problems prior to use. Vintage electrical items may not have polarized plugs. Fused plugs or double insulation. These items should be used with a GFCI device to ensure personal and property protection. All items used externally or in wet conditions should utilize a GFCI device. Vintage and antiq
|
|
|
5pc, 10 1/2" Wood Carving Firmer Chisels.
5 pc 10 1/2" Wood Carving Chisels These chisels are used. But in very good condition. Some have never been used. These Chinese chisels are high quality. They look like"Two Cherries" knockoffs. See pictures. They were used at a high school woodshop. Product Description: The set includes: One 1/4' One 1/2' One 5/8' One 3/4' One 1'
|
|
|
foredom electric wood carving tool flex shaft bits 1/8" collet 1/4" collet
Please Note: I'm placing this auction for my father. Foredom"R" series with bits shown. 1/8" and 1/4" collets, 1.7 amp motor. Original owner, Tested and works. Sold as is. Shipping note: box size is approximate.
|
|
|
carving tool sharpening stones, Norton-medium india MS-24 __________________A-53
Norton carving tools sharpening stone 4 1/2 inch x 1 7/16 inch x 1/2 inch tapered to 1/8 inch x 2 pcs 4 1/2 inch x 1 1/2 inch x 1/4 inch tapered to 1/16 inch we use recycled materials for packing combine shipping check my other listings international bidders; e-mail me for shipping quote before bidding. And pay after You receive invoice absolutely not responsible for foreign country customs: retards. Detains, lags, tardiness, delays, and slow downs buyer is responsible for all duty and customs fees
|
|
|
General Tool 1290 wood Carving Tool Set & Kunz+KST
all in picture no reserve
|
|
|
VINTAGE MACHINIST LATHE Wood Carving Gouge Chisel - 9" long, 1/2" guage
Selling(1) VINTAGE MACHINIST LATHE Wood Carving Gouge Chisel- 9" long. 1/2" outside diameter on the business end. Most of my items come estate fresh. Picked from tag sales and estate sales around North Central Connecticut. All should be considered used, unless otherwise specified. As such, they are untested and generally need a good cleaning. I will do my best to point out any flaws(or show them in pictures) Please review all pictures and everything written in the description. As many of these items are antique and vintage in nature. Seller does not extend any warranties or guarantees to remaining life on items. Ask questions. I am picking weekly. So please check my other listings and come back and look again soon. New items added weekly. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-1458fc642bc-0x10f-
|
|
|
VINTAGE WOOD CARVING SET HAND TOOL CHISEL KIT for WOODWORKING with BELT POUCH
VINTAGE WOOD CARVING SET HAND TOOL CHISEL KIT for WOODWORKING with BELT POUCH Item Description NO RESERVE! This is part of a wonderful collection of Antiques. Toys and Collectibles we have picked up over the last 20 years from local Estates. Please take the time to look at our other auctions! Offered in this auction is a VINTAGE WOOD CARVING SET HAND TOOL CHISEL KIT for WOODWORKING with CLOTH POUCH Please take a look at the photos for condition and ask any questions necessary. Add this GREAT piece to your collection. Don't miss out and bid now! I have made sure to give you collectors BIG photos of this wonderful item so you can see its condition and size. Shipping may be less. Depending on where you live in the U.S. so please WE CAN ALWAYS COMBINE WINNING AUCTIONS TO SAVE YOU FOLKS SOME $$ ON SHIPPING! Last note, don't forget to view ... moremy other auction listings to see the rest of the varied collectibles we offer! Please see my other auctions for recent quality estate purchases in varied antique& collectible categories. All listings are 1st time offerings from original owners estates or their heirs. We are an established Ebay seller. We strive to offer great quality items and exceptional customer service.BID WITH CONFIDENCE! ALL ITEMS ARE TAKEN TO A PROFESSIONAL SHIPPER so High bidder pays for insured UPS. FED EX, OR AIRBOURNE shipping and Insurance costs. Import duties, taxes, and charges are NOT INCLUDED in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/ buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. When bidding keep in mind that we will not adjust customs forms! Wisconsin reside
|
|
|
Woodcarving chisel Two Cherries 1/2'' number 4 carving gouge.
Here we have a number 4 Two Cherries wood gouge 1/2' wide.This is a highly regarded make of carving chisel sought after by craftsmen. Pennsylvania residents pay sales tax. Will combine shipping.
|
|
|
Morakniv Wood Carving 162 Hook Knife with Carbon Steel Blade
Very nice mora spoon/bowl knife. This is the one with the blade sharpened on both sides. It is used. Has very sharp blade. Look closely at the photos. Great for making spoon bowls. Thanks for looking!
|
|
|
Shop Fox D2808 No Mar Mallet, 30-oz carving chisel.........
This item has been lightly used. If you have any questions feel free to ask.I ship worldwide and I never add any extra costs for shipping or anything whatsoever.
|
|
|
Taylor #26 Carving Chisel
Nice Taylor#26( 1/2" carving chisel. Chisel and handle are in very good condition. PayPal only.
|
|
|
Henry Taylor number 19 wood carving gouge.
Here we have a Henry Taylor number 19 and it is 9/16' wide. This carving gouge is in good condition an of high quality as you would expect of a taylor chisel. PA residents pay sales tax.
|
|
|
Henry Taylor no 17 carving gouge.
Here we have a Henry Taylor carving gouge in good condition. It has the acorn logo and H Taylor marking. It is marked number 17 and is 7/8' wide. PA residents pay sales tax.
|
|
|
Vintage Millers Falls Carving Tool Set No. 106 6 pieces in original box
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! | | | Vintage Millers Falls Carving Tool Set No. 106 6 pieces in original box, Click to View Image Album Click to View Image Album Click to View Image Album Up for your consideration is a Vintage Millers Falls Carving Tool Set No. 106 6 pieces in original box. The tolls are 6 1/4" long and are in excellent condition. They are still sharp and show hardly any rust. A quality vintage set and Shipping is FREE in the USA. Items are usually shipped within 24 hours of payment. Please email for a quote if you need it shipped internationally. Please email with any questions and check out our Ebay Store. Please contact us if you have any questions at all. We are here to help you with your purchase decisions. Please view the total listing as there are more pictures at the bottom of ... morethe listing. Shipping Cost. If quoted in the listing, is an estimate and is based upon us using the least expensive way of shipping to you if your address is a street address in the Continental United States Only(48 States) all others(i.e. foreign country, Alaska and Hawaii residents) please contact us prior to purchase for a shipping quote. Thank you. Payment, I accept the following forms of payment: PayPal Shipping& Handling, $0.00 USPS Priority Mail® Additional Information, Click to View Image Album Click to View Image Album Policies, Shipping and Insurance, Please see description regarding details for shipping and insurance information. Please make sure you read all of our ad and view all the photos. Thank you for visiting with us. Come back often to our store which features antiques and other items we acquire at estate sales and auctions. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
|
|
|
Antique Vtg BUTCHER 1 1/4" Wood Carving Gouge Lathe Chisel Woodworking Tool EXC
Nice Antique or Vintage W. Butcher Cast Steel Wood Carving or Turning 1 1/4" Gouge in outstanding used condition This fantastic and early Sheffield made Lathe Gouge or Chisel is a wonderful find for collectors or to put to use right away. The condition is great for the age and the handle is just about as fine as you'll find on a chisel of this age Please check the pictures carefully for the exact age and condition. It's nice! Thank you for looking and Insured Priority Mail Shipping is Free in the U.S.A. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-147df5c0650-0x10c-
|
|
|
Henry Taylor #6 long spoon vintage wood carving gouge
vintage Henry Taylor#6 long spoon gouge 4mm 3/16"
|
|
|
Antique NEWBOULD CASTSTEEL 7/8" Wood Carving Gouge Lathe Chisel Woodworking
From my Dad's antique woodworking tool collection. This is a very nice Newbould Caststeel 7/8" turning chisel, 10" long with an octagonal wood handle. The large chip out of the handle is obviously old. There were apparently 3 generations of Newbould's in Sheffield, England, in the mid to late 1800's who dealt in the making and selling of steel and tools. At the newest. This has to be over 100 years old. And Dad used it into the late 1990's. It is still sharp. This is an excellent antique display piece. Or put it to work! g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14804fb9bec-0x108-
|
|
|
Two Cherries 1/2'' number 8 carving gouge.
Here we have a german made Two Cherries 1/2'wide number 8 carving gouge in good condition. Handle is tight and the tool is sturdy. PA residents pay 6% sales tax.
|
|
|
Henry Taylor 3/8'' number 37 carving gouge.
Here we have a Henry Taylor 3/8' carving gouge. It is marked number 37. The chisel is in good shape with no rusting are marring. PA residents pay 6% sales tax.
|
|
|
NSK Electer Rotary Tool 35,000 RPM Micro Carving Woodworking Jeweler Dental
NSK Electer Rotary Tool 35.000 RPM Micro Carving Woodworking Jeweler Dental Paypal is prefered form of payment. We allow 3 days for payment unless otherwise agreed upon. After that. We reserve the right to relist the item and file a non payment claim with ebay. Free shipping on items which is listed as"free shipping" is for the US only. We may be able to negotiate a shipping discount for international buyers. Please contact us. We ship very fast. Usually within 1 business days after payment is received. We"pad like mad" We do not skimp on any packing material including bubble wrap, peanuts, styrofoam, double boxing etc. Every attempt is made to ensure safe delivery of your item. Tracking information can always be located below the item after it is shipped. If an item arrives damaged. Please contact us prior to leaving ... morefeedback. International Buyers: Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We will not mark items as"Gift" or reduce the customs values. Please do not even ask. This is merchandise regardless if you are giving it as a gift. Size and weights limits differ from country to country. Please contact us prior to bidding on large items so that we can be sure it can be shipped. Always happy to ship to a US global shipping facility. Import regulations differ from country to country. Please be sure any item we are selling is not restricted from your country. WE DO NOT SELL/ SHIP TO RUSSIA! Unless otherwise noted in the listing. Returns are accepted within 14 days if item is not as described. We will always work with a buyer to ensure a happy transaction. Please contact us prior to leaving any neutral or negative feedback. We are Tim and Wendy Ingersoll. Partners in life. We enjoy enriching our relationship through socializing with friends and family
|
|
|
Vtg 9.5" DIXON USA No 1 - 3/16" WOOD CARVING GOUGE CHISEL
Vintage Dixon No 1- 3/16" Wood Carving Gouge Chisel- No Reserve. It measures 9 1/2 inches long with a 3/16 inch wide blade. It's marked- Dixon. 1, U.S.A. It's in good condition with no chips or cracks to the wood handle. The blade has some light surface pitting(minor)
|
|
|
Vintage Set of Grave Marker Carving Chisels
I bought these from a sculptor at a yard sale. He used to float himself in art by carving grave stones. I never used em. If you have any questions. Feel free to drop me a line. Thanks!
|
|
|
MILLER FALLS CARVING TOOL SET NO. 106C VINTAGE SET WITH SHARPNING STONE CLEAN
MILLER FALLS CARVING TOOL SET NO. 106C VINTAGE SET WITH SHARPNING STONE CLEAN SET COULD BE NEW IT APPEARS TO HAVE NO WEAR ON TIPS STONE LOOKS NEW SOLD AS USED
|
|
|
LOT 31 VINTAGE SJ JB ADDIS & SONS WOOD CHISEL CARVING TOOLS PRIZE MEDALS LONDON
large lot of j b addis chisels. some marked prize medals jb addis& sons. Some sj addis London. I will have to check them all to make sure but I think they are all addis. some have surface rust but no pitting. all would clean up. some of the handles have some damage. some have chips on the edge and need sharpened. I think there are 31 pieces for the tools and one loose handle. some are interesting and unique chisels. I will add some better photos tomorrow. thanks for looking
|
|
|
VINTAGE UNIQUE 3/8 " GOUGE WOOD CHISEL TOOL PATTERN MAKER CARVING #11 SWEEP
YOU ARE BIDDING ON AN UNUSUAL VINTAGE 3/8 INCH WOOD GOUGE USED BY 3 GENERATIONS OF PATTERN MAKERS FOR WOOD MODELS. CARVING(11 SWEEP) LATHE WORK(DESIGNED FOR THIS PURPOSE) MEASURING 12 5/8th INCHES LONG WITH A 4 1/8 INCH HARDWOOD HANDLE(MADE FOR TAPPING) A 8 INCH SHOULDER& A 1/2 INCH BLADE. FOR ITS AGE. IT IS IN REMARKABLE CONDITION. I WILL BE LISTING MORE CHISELS& TOOLS. I ACCEPT PAYPAL. PLEASE EMAIL ME WITH ANY QUESTIONS. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14942aafe5c-0x113-
|
|
|
Henry Taylor England Carving Chisel #11 Gouge (1/8") Excellent
Nice Henry Taylor# 11 carving gouge. Made in England. Great condition, needs honing. Good luck
|
|
|
CARVING DUPLICATOR gun stocks duck decoys linear rails and bearings 2 routers
Up for sale is a home built router carver with dual routers 8 inch centers perfect for making just about anything I used it for making cork decoys Purchased everything to build it myself using quality materials. At a cost of over 1200.00 it is constructed using 1/2 inch aluminum plate for rigidity, anti backlash ball screw for depth adjustment to prevent router kick and avoid gouges in carvings. added plus you aren't supporting the weight of the routers your just guiding them along the linear rails. the routers are Bosch colts with variable speed adjustments on both, with 1/4 in collets, each have 1/4 ball nose bits, the homemade style in the center is easily replaced should you desire smaller or larger bits for your copy carvings. Since it took me so long to finally line up and square up correctly level etc. it will ship with the carriage ... morefully assembled so all you need to do is build your own wooden box. mount the 2 rails and slide carriage on to begin carving. you are buying the carriage routers and rails the box will not be shipped. fully assembled measurements are 44 inches wide 51 inches long and 19 inches tall. the rails will ship separately do to there length to keep box size down on the carriage. shipping is an estimate of 180.00 due to the size and weight of carriage and the fact that it will ship in 2 separate shipment's I will refund any difference in shipping after shipping the copy carver to you thanks for looking
|
|
|
Delta Milwaukee Rockwell wood lathe Pfeil and other carving chisels.
This listing is for all the chisels shown in all the pictures below. Thirty of them. There are no cheap Chinese chisels in here. They are all top-quality tools. The case will not be included because it's not worth the cost to ship it. 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18
|
|
|
PFEIL carving chisel short bend gouge #9 5mm swiss made
These short bent gouges are used for cutting deep recesses and for hollowing out bowls. They are also particularly useful for cutting ornamentation. Radii, and rounded surfacesPFEIL#9 5mm. was purchased over 50 years ago and never used by a deceased relative NEW/OLD stock Swiss made combine shipping 1.00 each additional chisel.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-149c4a71abd-0x10a-
|
|
|
USED MERLIN BONSAI TREE CARVING TOOL ANGLE GRINDER WORLDS SMALLEST CHAIN SAW !!
USED"ORIGINAL" MERLIN INCREDIBLE CARVING TOOL! AWESOME CHAIN SAW BLADE SMALL TOOL AND DESIGN MAKE THIS ONE OF THE BEST AND EASIEST CARVERS AVAILABLE! IF YOU CAN VISUALIZE IT. THIS TOOL CAN MAKE IT HAPPEN! MAKES VERY EASY WORK OUT OF CARVING! USE IT TO CREATE BEAUTIFUL JIN/DEADWOOD EFFECTS! CREATE TAPER AND CLEAN UP STUMPS ON YOUR BONSAI! IF YOU HAVEN'T HEARD OF. OR TRIED THESE, YOU WILL BE AMAZED! CARVING ON A MAPLE IS LIKE"CUTTING BUTTER" VERY GENTLE AND EASY TO USE! OLDER KIDS AND WOMEN WILL LOVE IT TOO! MANY OTHER USES! HOOF TRIMMING! TAXIDERMY.ICE SCULPTING, CUT OFF, SANDING, GRINDING AND MUCH MORE. COMES COMPLETE AS SEEN ABOVE KIT INCLUDES NICE HARD CARRY CASE. TOOL AND 4 BLADES AND INSTRUCTIONS THE CHAIN SAW BLADE IS IN GOOD SHAPE AND SHARPENS EASILY AND HAS A LONG LIFE STILL! THE RED SHAPING DISC WASN'T ... moreUSED MUCH BUT IS AWESOME FOR SHAPING! IT SEEMS TO STAY CLEAN AND SHARP MY NAME TAG WILL BE REMOVED FROM THE CASE AFTER IT SELLS THIS MAY STILL HAVE A 1 YEAR MANUFACTURER WARRANTY REMAINING! IT IS RUNNING LIKE NEW BUT NOW I USE THE MERLIN 2 AND THIS IS JUST SITTING AROUND NOT CREATING OR FIXING. SO HERE'S YOUR NEW TOOL. FREE SHIPPING TO USA*DUE TO VALUE-THIS MAY NEED SIGNED FOR* GET IT NOW TO USE AND SHOW YOUR BONSAI BUDDIES! THANKS FOR CHECKING IT OUT! IF YOU HAVE TIME CHECK OUT MY OTHER ITEMS FOR SALE. I DO CARRY THE MERLIN 2 AND REPLACEMENT BLADES AND OTHER ACCESSORIES
|
|
|
Henry Taylor and Sculpture Associates Wood Carving Gouge Chisels VERY CLEAN
You are buying a very nice set of Henry Taylor and Sculpture Associates Gouged/Chisels.These were manufactured in Germany and England to the highest standards making these very desirable gouges with woodworking professionals. This set would cost over $800.00. Buy it now for half of the original price. They have little wear and are sharp and ready to go. Comes with a roll up case to keep them nice. Henry Taylor: 5 lrg u gouge.5Sml,64 wide u gouge,39 v gouge,4 u gouge,21sml curved gouge,32 curved v gouge,4 med u gouge,7 med u gouge,3 sml gouge,5 sml u gouge,39 sml v gouge,2 chisel. Sculpture Associates: 1/2" u gouge. 39 v gouge, 4/6 u gouge. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14a546277d6-0x112-
|
|
|
MACHINIST TOOL LATHE UNUSED Crown England Wood Carving Chisel Gouge Set in Box
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14a7e552327-0xff-
|
|
|
Freud Woodworking 6 Piece CS-106 Professional Wood Carving tools Set
WE TRULY RESPECT"VERO" We are not an employee.Distributor nor affiliated with any BRANDS in any way. All MERCHANDISE ARE GURANTEED AUTHENTIC. Freud Woodworking 6 Piece CS-106 Professional Wood Carving tools Set Details:Nice 6pc set for your wood project. Condition: Good. As pictured As good as it gets. Tax: We do charge Sales tax of 9.00% in California only. ONLY AUTHENTIC GOODS. PERIOD. WE APPRECIATE YOUR BUSINESS! Payment must be received within 3 days.California Residents will be charged 9% sales tax during checkout. We Ship WorldWide" USA: All orders within the continental United States are shipped via Fedex or USPS. Worldwide: All international orders are shipped via carrier of choice depending on destination. Returns will be accepted within 14 days. Midastars warrantees and represents that the goods are as they appear ... moreand as they are described in the above listing. We will accept returns of the goods only they fail to meet the descriptions above. Midastars Auctions specifically disclaims any implied warranties of title. Merchantability, fitness for a particular purpose and non-infringement. Some states do not allow the disclaimer of implied warranties, so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights that vary from state to state. Midastars entire liability to you or any third parties under any circumstance is limited to the sales price of the relevant goods and $100. Some States do not allow the exclusion or limitation of incidental or consequential damages. So the above limitation or exclusion may not apply to you. All text and images in this auction are of Midastars. All rights reserved. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Posted with
|
|
|
Carving Duplicator Duplicarver F200 -Carve Gun Stocks, Guitar Bodies, Necks, 3D
CARVING DUPLICATOR Duplicarver F200 The Duplicator is very easy to use. Note: Search Duplicarver on youtube to see videos of it in use. You can carve as many of the original item that you want- very easily with no carving experience and very little training. 24"D x 37"W x 63"H carve new pistol grips Gunstocks. Furniture parts. Ball and Claw chair legs. Guitar or other instrument bodies or necks. 3 dimensional items like statues. Etc. Decorative pieces carousel horses replace a damaged piece you can't find architectural millwork. Flat stock or 3D items in the round AMAZING tool for the hands-on person who wants to do his own work. The 14" diameter turntables allows for the rotation of the workpieces a full 360 degrees. In unison using the repositionable tie rod to duplicate an object, then they can be locked solidly ... morein position for carving with the twist of a knob. Cutting can be done in three dimensions easily. THE ROUTER is INCLUDED Comes with a 1 HP- Black and Decker router(but any router with a standard 3 1/2" body will fit it) and a variable speed control. you can start carving as soon as it arrives. Will carve objects up to 34" without moving them- infinite length if moved and re-indexed. Note: The last picture shows optional arms that can be purchased from the manufacturer(I believe they are about $150 for them) THESE ARMS ARE NOT INCLUDED WITH THIS CARVER. This is an amazing tool that will allow you to carve identical pieces from an original item. This machine will carve duplicated objects any length! It is like tracing but in 3D move effortlessly on steel shafts while a router fitted with a carbide bit does the cutting on a blank piece of wood. A guide pin follows the contour of the original item easily. The duplicator will allow you to cut a duplicate items from a blank piece of wood. Note: I am located in upstate NY- Nichols. NY zip code 13812(use mapquest to see where I am in relation to you) Pickup here is free or I will ship if you arrange shipping. I can help you fi
|
|
|
MACHINIST LATHE Henry Taylor Vintage Wood Carving Gouge Chisel's 3 of them
Vintage carving chisel. A piece of history, Shefield England
|
|
|
Vintage Carving Tools Bone Handle Cutting Widdling N4
Vintage Carving Tools Bone Handle Cutting Widdling N4 Please ask if you have any questions! Shipping is always combinable! International shipping: While we offer international shipping. Please contact us first to confirm- we do not ship to some countries, and some items are just too heavy to ship overseas! Also, ask us about international shipping discounts! Payment is required within 7 days of auction ending. After 7 days. An unpaid bidder case will automatically open, and cancel the transaction. Items ending up to 7 days apart can apply the combined shipping discount. If this is the case, payment for the oldest item must still be recieved within 7 days. Please note: eBay will AUTOMATICALLY issue an unpaid buyer case after 7 days of non-payment. Invoices are sent in groups of 20 items; once this number has been hit in one invoice. We require ... morepayment before further bidding. Mail will usually take between 7 and 10 days. Thank you once more for your bid! DUE TO AN EBAY INVOICE LIMIT OF 40 ITEMS. IF YOU WIN OVER 40 ITEMS, WE WILL SEND AN ADDITIONAL INVOICE. gsrx_vers_566(GS 6.7.1(566)
|
|
|
Legacy Wood Working Carving Machine
This wood carving machine is a Legacy Model 2000 Router. 10 foot long and 14 foot spindle size. Standard 2 x gear sets. Retails for $6000- $7000.
|
|
|
Spannsage Wood Carving Chisel Knifes /Tools Wood lathe 150 jahre made in germany
Up for sale are 8 vintage spannsage wood chisel and carving tools. Chisel numbers are 6MM. 10MM, 12MM, 25MM. Craving Knifes numbers are 4MM, 6MM, 8MM, 12MM. WHAT A FIND! this was a barn find and handle are in good shape some surface rust spots on the ends of number 12 carving knife and on number 25 of chisel. These look to have been used at one point because the 25 chisel has a few Knicks on end and the number 6 carving knife has heat mark on tip. So please ask questions or any knowledge will be helpful. I have described these to the best of my knowledge and reserve the right to end before auction is over.
|
|
|
Set of 5 Vintage Marples Wood Carving Tools Chisels Gouges
Set of 5 Antique Marples Wood Carving Tools Chisels Gouges Set of 5- beautiful antique carved shapley handles- all different points and handles One handle is broken- see picture. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14b10408a15-0x10b-
|
|
|
Henry Taylor Vintage Wood Carving Tools ** LOT OF 3 **
ESTATE SALE FIND.VG CONDITION- COULD USE SOME STEEL WOOL CLEANING! The item pictured is the EXACT item that you will receive. All items are kept in a CLEAN. SMOKE AND PET FREE environment. All items will ship within 48 hours of cleared payment(usually sooner) All items are sent in appropriate, protective packaging. Shipping is fast and tracking information is always supplied. If a problem arises and you are not happy PLEASE contact me as I WILL work with you. THANK YOU FOR LOOKING and HAVE A GREAT DAY!
|
|
|
16 Pocket Brown Leather Tool Roll for Carving Tools or Chisels by Narex
Product: 16 Pocket Brown Leather Tool Roll for Carving Tools or Chisels by Narex Condition: Used- Like New Actual item and condition are pictured. EB14-HA33
|
|
|
CarveWright CNC Carving Machine - Version C - Less than 1 hour
Carvewright CNC Machine- Version C I've listed this as a"used" machine but it's never really been used. I've ran it a few times today to test all the systems. It only has 55 minutes on the cut motor. It has been packed away in the original packaging for the past year or so. Here's a video of it cutting that was filmed today: Note: the link above doesn't work. Go to youtube and search for: CarveWright- Version C- Machine 1 This machine has the factory upgraded CarveTight Spindle cutting head. It comes with: 1/16 carving bit(with CarveTight Adapter) Memory Card, Card Reader, Once the winning bidder gets the machine. They will need to register the machine serial number with. At that point you can download version 1.87 of the CarveWright Project Designer for free. CarveWright recommends that sellers do not include ... morethe original software disc with the sale of a used machine. It's better to download the current version online. I can't seem to find the motor Muffler/Vacuum Bag. I'm going to look around more tomorrow and see if I find it. If not. They're $15 on CarveWright site. I never used them. I always attached my shop vac to this port. Note: I've blurred the serial number incase someone tries to register the machine before the winner. Please send me a message and I'll gladly send to the serial number. I've contacted CarveWright this week and the machine is ready to be registered. Owner's Manual can be downloaded here: This machine is sold"as is" there is no warranty. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14b67fbcbcd-0x10c-
|
|
|
CarveWright CNC Carving & Cutting Bits
Carvewright CarveWright CNC Carving& Cutting Bits 1/16 carving bit(with Quick Change Adapter) 1/8 carving bit(with Quick Change Adapter) 1/8 cutting bit(with Quick Change Adapter) Only used one time. You can remove the Quick Change Adapter and use the CarveTight Adapter if needed. Please check my other auctions. I'm selling more CarveWright Equipment.
|
|
|
Oliver Intelliicarve wood carving machine
I used this for about 50 hours. I would prefer local pickup. I have no idea how much it would cost to ship. Maybe around $100.00.From the Manufacturer The 1013 intelliCarve is a 13¡± x 18¡± capacity automatic carving machine capable of producing 2D and 3D carvings. It¡¯s super easy to use and lets you to get started right away making all kinds of beautifully artistic projects. There is no need to learn complicated CAD/CAM software programs and only very basic computer skills are necessary. Use i-Picture to open your favorite digital picture and let it convert the picture to a Gee-code file. Copy the file to a USB flash drive, plug the flash drive into intelliCarve and away you go. In no time you have a beautiful lithophane reproduction of your original photograph. Or get started ... moreright away making 3D carvings from the included library of drawings. The intelliCarve capabilities are very impressive and can be seen in the intricacies of the carvings it will produce.The 1013 intellicarve comes complete with everything you need to get started, including carving bits and the patented i-Picture software. 3D pieces, and lithophanes are just a small sample of projects the IntelliCarve can produce. Stepper motors give an accuracy of 0.004¡± ensuring picture perfect results with little or no hand sanding. Its robust design and use of composite materials makes the 1013 virtually maintenance free. Simply blow off the dust and its ready to go.
|
|
|
CarveWright CNC Carving Machine - Version A - 10 Hours of Cut Time
Carvewright CNC Machine- Version A- Needs Repaired or can be used for Parts This machine only has 10 hours of cut time. It has a broken Y-Axis belt. $20 part from CarveWright. It's easy to replace. CarveWright posted a video on YouTube explaining how to replace it. Go to YouTube and search for"Replacing The Y-Belt" I have tested this machine as much as I can and it seems to be operating fine. The board sensor is working and it correctly measured a board. The motor spins up but I can't test the cutting actions without the y-belt replaced. The X and Z movement has no problems. I've tried to test as much as I can but I'm selling this carver"As Is" The cut motor time is only 10 hours but the"Total Power On Time" is listed as 652. I must have not realized that it was plugged in and sitting idle! I ... moredon't believe that this has any effect on the carver. The carver is very clean but it has a few small white paint dips on the top cover. It comes with: 1/16 carving bit(with Quick Change Adapter) Bit Release Tool, It does not come with: Memory Card, Card Reader, Muffler/Vacuum Bag, Once the winning bidder gets the machine. They will need to register the machine serial number with. At that point you can download version 1.87 of the CarveWright Project Designer for free. CarveWright recommends that sellers do not include the original software disc with the sale of a used machine. It's better to download the current version online. Note: I've blurred the serial number incase someone tries to register the machine before the winner. Please send me a message and I'll gladly send to the serial number. I've contacted CarveWright this week and the machine is ready to be registered. Owner's Manual can be downloaded here: This machine is sold"as is" there is no warranty. Please check my other auctions. I'm selling more CarveWright Equipment.
|
|
|
CarveWright CNC Carving Machine - Version C - "New" Only Ran to Test - 21 Mins
Carvewright CNC Machine- Version C- New" Only ran to test I've listed this as a"used" machine but it's never been used. It still has the cord factory wrapped up. Plastic film on the top cover and packaging on the flex shaft. I've ran it a once today to test all the systems. It only has 21 minutes on the cut motor. It has been packed away in the original packaging for the past year or so. Note: Any marks on the clear top cover are only on the protective film. Here's a video of it cutting that was filmed today: Note: the link above doesn't work. Go to youtube and search for: CarveWright- Machine 3 Version C NEW This machine has the factory installed upgraded CarveTight Spindle cutting head and Heavy Duty Traction Belts. It comes with: 3/16 cutting bit(with CarveTight Adapter) 1/16 carving bit(with CarveTight ... moreAdapter) 4mm Allen Wrench, Muffler/Vacuum Bag, Memory Card, Card Reader(unopened) Once the winning bidder gets the machine. They will need to register the machine serial number with. At that point you can download version 1.87 of the CarveWright Project Designer for free. CarveWright recommends that sellers do not include the original software disc with the sale of a used machine. It's better to download the current version online. Note: I've blurred the serial number incase someone tries to register the machine before the winner. Please send me a message and I'll gladly send to the serial number. I've contacted CarveWright this week and the machine is ready to be registered. Owner's Manual can be downloaded here: This machine is sold"as is" there is no warranty. Please check my other auctions. I'm selling more CarveWright Equipment. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14b77103194-0x114-
|
|
|
CarveWright CNC Carving Machine - Upgraded Version B - 20 Hours of Cut Time
Carvewright CNC Machine- Version B that's been upgraded to a Version C This machine has very low cut hours. Only 20 hours. The machine came from CarveWright already upgraded with the CarveTight Spindle and Heavy Duty Traction Belts. It appears to be identical to my Version C. I've ran it a few times today to test all the systems and to make a test carving. The cut motor time is only 20 hours but the"Total Power On Time" is listed as over 600. I must have not realized that it was plugged in and sitting idle! I don't believe that this has any effect on the carver. Here's a video of it cutting that was filmed today: Note: the link above doesn't work. Go to youtube and search for: CarveWright- Machine 2 Version B This machine has the factory installed upgraded CarveTight Spindle cutting head and Heavy Duty Traction ... moreBelts. It comes with: 1/8 cutting bit(with CarveTight Adapter) Memory Card, Card Reader, Once the winning bidder gets the machine. They will need to register the machine serial number with. At that point you can download version 1.87 of the CarveWright Project Designer for free. CarveWright recommends that sellers do not include the original software disc with the sale of a used machine. It's better to download the current version online. I can't seem to find the motor Muffler/Vacuum Bag. I'm going to look around more tomorrow and see if I find it. If not. They're $15 on CarveWright site. I never used them. I always attached my shop vac to this port. Note: I've blurred the serial number incase someone tries to register the machine before the winner. Please send me a message and I'll gladly send to the serial number. I've contacted CarveWright this week and the machine is ready to be registered. Owner's Manual can be downloaded here: This machine is sold"as is" there is no warranty. Please check my other auctions. I'm selling more CarveWright Equipment.
|
|
|
Vintage Henry Taylor Sheffield E.C. Muller Wood Carving Tools ** LOT OF 8 **
Welcome to my auction!Up for bids is Beautiful Vintage Set of 8 wood carving tools.The 5 big ones are stamped with the makers mark of H.Taylor sheffield.England.There numbers are 8,4-1/2,9-1/4,21-1/4 and 7-1/4.There sizes are penciled on the handle and or stamped one the tool. The smaller one is stamp E.C. Mulle r.The brush is from stengil and is 100% pure bristle#410.The very small one has no marking. They are in very nice condition and look to me not to be used.Just a little tarnish.a little steel wool will clean them up nice) You get all of the tools in the photos.I have started this auction at a very low price and there is No reserve! The FREE shipping will be priority mail by the USPS and will included delivery conformation. Tracking numbers and very careful packing.Check my feedback and bid with confidence.Thanks for stopping by and ... morehappy bidding Check out my!for more great deals
|
|
|
CHAIN SAW CARVING TOOLS // KING AURTHER`S TOOLS & ARBORTECH
i have a pair of electric chicago power tools(harbor freight) that have attached 1) a 22 tooth KING AURTHUR TOOL chain saw blade.USED LOOKS NEW. 2) a chicago power tool with a ARBORTECH mini-grinder extension,USED LOOKS NEW.this tool does not have any tool/cutter/disc on it but there is 2 packs of 4 mini sander/disc attachments included and a package with a TUNGSTEN CARBIDE BLADE(2 INCH/50MM) also included is a small plastic box with misc nuts,washers,allen wrench,some misc paperwork included,etc ANY QUESTIONS ASK. BY PURCHASING THIS SHARP CUTTING TOOL THE NEW OWNER CANNOT COME BACK TO ME FOR GETTING INJURED.
|
|
|
11 Vintage Sculpture Associates Wood Turning Carving Tools Made In Italy
11 tools. All are Sculpture Associates Made In Italy and Germany Vintage Wood Turning Tools. They are sharp and Used. One of the handles is badly split/cracked. Your a wood worker and would fix it better than I can. I have little knowledge in this field and I am not sure what each tools is called. So please look at the pictures to help you understand what I'm selling. Questions, just ask. Thanks for stoppin by.
|
|
|
Vintage Tool Lot Wood Carving? Taps?
Vintage Tool Lot Wood Carving? Taps? Found all of these together. Not sure if they go together or not or what they are used for? Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
 |