|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$65.00 Shipping Condition: New – Open box Location: Ukraine P4033 Unovalued resistance standard resistor. Coil- analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs. Device has the same or better characteristics: ... moreNominal Value: 100 Mohm; High Accuracy class: 0.005% U max = 1500V MTBF 30.000 hours The average service 10 years Dimensions: 115x125x260mm; Weight: 1.8 kg; Warranty 12 month. This device was also used in USSR and Russian army. So it has best quality. Longevity. And permanence characteristic. Condition: NEW(not used. But from an old stock) Tested and 100% workable. If necessary. The device can be calibrated and provided with the calibration certificate from Government Standardization Institute( +145-265usd) P 4033 resistance standard resistor is analog device of such manufactures as LEEDS& NORTHRUP. ESI(Electro Scientific Industries) Honeywell, IET Labs, JAME G BIDDLE CO, GRAY INST, TEGAM, Guildline, Tektronix, Fluke and others. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Measurement resistance coil P4033 d esigned to used as a single-valued electrical resistance standard( OMEC) in DC circuits. Nominal resistance 10 8 Ohm Accuracy class 0.005 General information about the devise Measurement resistance coil P4033 is designed to used as a single-valued electrical resistance standard( OMEC) in DC circuits. Operating conditions: ambient air temperature(20 ± 5) °C; relative humidity from 25 to 80% in operating temperature range; atmospheric pressure 84-106.7 kPa( 630-800 mm Hg) Type of climatic modification YXL 4.1 according to GOST 15150-69. Measurement resistance coil P4033 belongs to nonrecoverable. Single-channel and single-function devices. Technical characteristics Basic parameters of coils P4033and OKP codes are shown in table. Permissible deviation of resistance coil P4033 actual value from nominal value at primary testing(at manufacturer release) does not exceed ± 0.01% if following
Buy It Now
$65.00 Shipping Condition: New – Open box Location: Ukraine P4018 Unevalued resistance standard resistor, coil - analog of LEEDS & NORTHRUP, ESI, Honeywell, IET Labs. Resistance standard P4018 designed to work ... morein DC and AC circuits as exemplary and working electrical resistance standards in using conditions.
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P321 Coil, Unevalued resistance standard resistor. Nominal values 1 Ohm. ( For sale is one coil). Nominal Value Ohm. Also we can provide other resistance, ... morecapacitance and inductance standards, decade box and other etalons.
Buy It Now
$70.00 Shipping Condition: Used Location: Ukraine P40114 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics. Device ... moreis designed to transfer of electrical resistance values from standard Р40114 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40114( MMEC) in measuring DC circuits. Nominal Value: 1 Gohm; Total measureg range: 0.01-1GOhm; High Accuracy class: 0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 7 Ohm; S equential connection 10 9 Ohm; Nominal connection of 1 stage 10 8 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years; Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 2.6 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40114 1 General information about device 1.1. Resistance standards Р40114 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40114( MMEC) in measuring DC circuits. 1.2. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40114 working conditions: ambient temperature(20 ± 5) ° C(for Р40115- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mmHg) 2 Technical characteristics 2.1. Main parameters of standard Р40114 are shown in Table 1. 2.2. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. 2.3. Standard P40114 are restorable. Repairable and multifunction devices. 2.4. Acceptable basic deviation limit of resistance standard Р40114( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% a
Buy It Now
$70.00 Shipping Condition: Used Location: Ukraine P40113 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics: Resistance ... morestandard Р40113 d esigned: to transfer electrical resistance values from standard Р40113 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Nominal Value: 100 Mohm; Total measured Value: 1- 100 Mohm; High Accuracy class: 0.01-0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 6 Ohm; S equential connection 10 8 Ohm; Nominal connection of 1 stage 10 7 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years. Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 2.6 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40113 General information about device Resistance standards Р40113 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40113 working conditions: ambient temperature(20 ± 5) ° C(for Р40113- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mm Hg) Technical characteristics Main parameters of standard Р40113 are shown in Table 1. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. Standard P40113 are restorable. Repairable and multifunction devices. Acceptable basic deviation limit of resistance standard Р40113( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% atmosphe
Buy It Now
$90.00 Shipping Condition: Used Location: Ukraine Standard P40111 are restorable, repairable and multifunction devices. Resistance standard’s P40111 ( MPEC)acceptable resistance change (instability )does ... morenot exceed values inp.2.4 and 2.5. after a yearfrom the date of first attestation.
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P321 Coil. Unevalued resistance standard resistor. NEW. P321 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 0.1 Ohm. For sale is one coil) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 0.1 P321 100 15 20 3 20 4 0.1 0.05 3.2 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P321 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal resistance 0.1 Ohm; Accuracy class 0.01 Electrical resistance coil P321 represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Electrical resistance coil P321 operates in liquid environment( capacitor oil, kerosene, o rganosilicium fluid) Acceptable resistance deviation of coils P321 from their nominal values caused by adjustment inaccuracy at temperature of 20°C and power not exceeding nominal: for accuracy class 0.01 is not more th
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P331 Coil. Unevalued resistance standard resistor. USED. P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 100 Ohm. For sale is one coil) I sold a more then 70 units of this devices types. That is why now in stock I had units with scratches. Cracks and cleavage of the case and panel. Please take a look the picture. Also I had no enough units with class 0.01. That is why I can send you unit with class 0.02. I will choose the best one used device I had in my stock. It will be tested and 100% workable. I give you a warranty for 1 year. I Also I had new devices please take a look them by the link: http:stores.ebay.com/electro-radio-device-high-precision/Resistance-Standards-Boxes-i.html?fsub=3003745013. Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 100 P331 100 8 20 2 20 10 0.1 0.025 0.1 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P331 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P310 Coil, Unevalued resistance standard resistor. Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons. ... more(It ismax error (accuracy) which is given per manufacturer. ).
|
|
|
 |