In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
62.15
Buy It Now
Free Shipping
Condition: Brand New
Location: Brentwood, United States
The manual is a bound 8.5" x 11" soft cover, 156 pages in length and is fully illustrated with over 450 B&W photographs plus step-by-step instructions ... morefor refurbishing your lathe. As you will notice, this is NOT a fuzzy Xerox reprint of an existing manual.
$
214.76
Buy It Now
$290.84 Shipping
Condition: Used
Location: Middlebury, United States
Size: Length: 106 in. Width: 4 in. Height: 4 in. To get a freight quote we will need to know the following Warehouse Location: NA13117. Prefer to pick ... moreit up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly.
$
30.00
Buy It Now
$15.00 Shipping
Condition: New – Open box
Location: Canada
5 New Atlas Spartan Lathe Cutting tools. about 5/16" x 5/16" x 2". Some are light or dark, the 5 sent will selected randomly.
$
52.17
Buy It Now
$8.70 Shipping
Condition: Used
Location: Columbus, United States
Please carefully review all photos for item condition, measurements, and specifics.Item comes from a pet-free and smoke-free environment, carefully maintained ... moreto ensure it arrives in its best condition.As a newer seller, I kindly ask you to carefully observe all photos before making a purchase. This helps establish the best expectation for the item and minimizes misunderstandings or returns.Thank you so much for taking the time to read this, and for your consideration to purchase something. :)
$
28.00
Buy It Now
Free Shipping
Condition: New
Location: Franklin, United States
$
19.97
Buy It Now
$3.97 Shipping
Condition: Seller refurbished
Location: Houston, United States
1936 South Bend Lathe Manual No. 4-A How.
$
159.99
Buy It Now
$10.40 Shipping
Condition: New
Location: Berrien Springs, United States
Fits the 6″ 618 & 101 model lathes. New M6-428 Dual Vee Motor Pulley.
$
22.98
Buy It Now
$5.35 Shipping
Condition: New
Location: Ionia, United States
Keyed center bore =. 563" (9/16").375 width. 563 bore. 125 keyway. Gear Face Width =. 375" (3/8").
$
39.95
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of ... moreour repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ lot of parts teeth good from south bend 13 lathe for tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
$
7950.00
Buy It Now
Condition: Used
Location: Louisville, United States
15" X 56" SOUTH-BEND "NORDIC 15" GEARED HEAD. ENGINE LATHE. Series "Nordic 15". Cross-Slide Cross Feed Travel 9-3/8". Motor, Horsepower 7.5 HP. (54) Thread ... moreChanges, U.S. Standard 1-5/8 to 96 TPI. Distance Between Centers 56".
$
35.00
Buy It Now
$5.95 Shipping
Condition: Used
Location: Youngstown, United States
9/16 bore, 1/8 Keyway, 3/8 thick. Will combine shipping. e3
$
18.95
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
5.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
45.70
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description: AXA Size Quick Change Tool Post Set for Lathe 6 - 12" 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank tool bits ... moreup to 7/16" Brand new Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 & 11" Nardini TT1000 & TT1200 and many other import lathes Interchangeable With Aloris, Dorian , Yuasa & Phase II It is precision engineered to assure repetitive accuracy No time wasted with shims.
$
89.95
Buy It Now
Free Shipping
Condition: New
Location: Kenilworth, United States
CALL US IF YOU NEED ANY OTHER SIZE MT LIVE CENTER.
$
43.99
Buy It Now
$13.99 Shipping
Condition: Used
Location: Morris Plains, United States
NO EXCEPTIONS.
$
50.00
Buy It Now
Free Shipping
Condition: Used
Location: Goshen, United States
Good vintage condition. Don't think it was ever used/ played with. Paper still on back -will have to be peeled off and cleaned up. Clear plastic base ... more8" x 3" x 1/2" thick. Box has price sticker damage, see photos.
$
5.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
75.00
Buy It Now
$4.13 Shipping
Condition: Used
Location: Fond Du Lac, United States
$
170.00
3d 13h 7m 41s
0 bids
Free Shipping
Condition: Used
Location: Bronx, United States
Thimble spins smooth and free. S outh Bend.
$
36.50
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
150.00
1d 8h 14m 56s
0 bids
$15.00 Shipping
Condition: Used
Location: Orange, United States
Pulled from 1930's lathe.
$
144.00
Buy It Now
$10.40 Shipping
Condition: New
Location: Berrien Springs, United States
NEW FACTORY OEM ATLAS CRAFTSMAN 10-12 LATHE 10F-11 TRAVERSE GEAR CASE NEW PART Click to Enlarge Click to Enlarge NEW FACTORY OEM PART ATLAS CRAFTSMAN ... more10-12 INCH LATHE 10F-11 TRAVERSE GEAR CASE. FOR LATHES WITH 3/4 LEADSCREWS AND POWER CROSSFEED.THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
$
19.95
Buy It Now
$8.70 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
50.00
Buy It Now
$5.00 Shipping
Condition: New
Location: Yorba Linda, United States
THESE ARE LAMINATED BRASS SHIMS FOR 10K SOUTH BEND LATHE SPINDLE. THE LAMINATIONS ARE (1) LAYER. 001, (15) LAYERS. 002, AND (1). 032 SOLID SHIMS TOTAL ... moreTHICKNESS IS. 064 +/-. 003.
$
79.99
Buy It Now
$10.40 Shipping
Condition: New
Location: Berrien Springs, United States
$
19.95
Buy It Now
$8.70 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
34.75
Buy It Now
$9.40 Shipping
Condition: Used
Location: Baltimore, United States
South Bend 9 10K lathe 48 t change gear. Other change gears available.
$
28.99
Buy It Now
Free Shipping
Condition: Acceptable
Location: Charlotte, United States
A terrific collectible - A 1938 SOUTH BEND LATHE WORKS BROCHURE & PRICE LIST! SOUTH BEND LATHE WORKS. DATED JAN. 1, 1938. THE NEW SOUTH BEND 9" x 3' & ... more16" x 6' MODELS. SOUTH BEND, INDIANA. BLACK & WHITE PICTURES OF THE MODELS & FEATURES.
$
76.00
Buy It Now
$50.00 Shipping
Condition: Used
Location: Bristol, United States
Up for auction is a vintage 16" South Bend Lathe Cone Cover. AKA Belt Cover. I am selling this as I took it off the machine so you will have to clean ... moreit. Has lubrication chart in tact and attached as original. The Jam Nuts part#139x27 and Set Screws part# P702T&H1 come on it as well. So clean it and use it or just use it. Serial number on lathe 974 HKR 8
$
7.99
Buy It Now
$6.50 Shipping
Condition: Used
Location: Youngstown, United States
Will combine shipping. (D2)
$
25.95
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
49.99
Buy It Now
$8.65 Shipping
Condition: Used
Location: Nashville, United States
Original South Bend countershaft lever for a 9" or 10K South Bend lathe with horizontal drive. Lever is part number 1945N1. All as shown. Always ... morecombine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
21.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
30.00
Buy It Now
$6.05 Shipping
Condition: Used
Location: New Hyde Park, United States
South Bend 9" Junior Lathe Idler Change Gear Bolt Bushing Banjo. Condition is Used. Shipped with USPS Ground Advantage.
$
29.90
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
South Bend Heavy 10 Lathe Headstock Spindle Thrust Bearing. 1-7/8" i.d., 2-9/16" o.d., 7/16" thickness. Free shipping to the lower 48 in the United States ... morefirst class mail
$
21.99
Buy It Now
$6.45 Shipping
Condition: Used
Location: New Britain, United States
As shown in pictures
$
164.00
Buy It Now
Free Shipping
Condition: Used
Location: United States
All in all, this item is in pretty good shape. LOC: G-P2-2.
$
45.70
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: AXA Size Quick Change Tool Post Set for Lathe 6 - 12" 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank tool bits ... moreup to 7/16" Brand new Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 & 11" Nardini TT1000 & TT1200 and many other import lathes Interchangeable With Aloris, Dorian , Yuasa & Phase II It is precision engineered to assure repetitive accuracy No time wasted with shims.
$
90.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Portland, United States
Yuasa tools are comparable to the most common historic makers of these ‘cutter holders’ are J. S. Williams and Armstrong. Compare to Armstrong, Atlas, ... moreClausing, South Bend, etc. #3 = 7/16″. #5= 1 x 2 1/8 x 12.
$
6.99
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
(Preferred & cheapest). ( depends on your device ).
$
32.99
Buy It Now
Free Shipping
Condition: New
Location: Dayton, United States
This item is one 2MT Crotch Center. Nothing else included. This item is one Crotch Center. Made by Dave from YouTube's Crafted Channel. I own many Atlas ... morelathes on which to test my parts. I have run plastic parts including my ABS gears and change gear bushings for over 4 years making big cuts.
$
350.00
Buy It Now
$18.00 Shipping
Condition: Used
Location: Oregon, United States
It is in used condition it could use a little cleaning.
$
137.00
Buy It Now
$10.40 Shipping
Condition: New
Location: Berrien Springs, United States
USA made 9-11 Traverse Gear Case. Simply transfer your existing gears and shaft. Made to the original print except extra material was left in the weak ... moreareas where they were prone to fail. All clearances and fit have been tested on an apron and bed.
$
39.95
Buy It Now
$8.95 Shipping
Condition: Used
Location: Youngstown, United States
$
10.00
Buy It Now
$6.50 Shipping
Condition: Used
Location: Youngstown, United States
$
59.99
Buy It Now
$9.99 Shipping
Condition: Used
Location: Union Grove, United States
South Bend.
$
50.00
Buy It Now
$5.40 Shipping
Condition: New
Location: Berrien Springs, United States
New Crossfeed Nut for the 100 Series 12" lathes - S/N 0001 thru 9999. May fit other models also, there's not a lot of info out there on these models. ... moreYou are sending money to them!
$
49.00
Buy It Now
$18.40 Shipping
Condition: Used
Location: Ottawa, United States
$
8.99
Buy It Now
Free Shipping
Condition: Used
Location: Mansfield, United States
FROM A SOUTH BEND 9" SIZE LATHE. SOUTH BEND.
$
16.99
Buy It Now
$5.40 Shipping
Condition: New
Location: Berrien Springs, United States
Used in 9", 10" & 12" lathes for retaining the back gear pin. Used in 9" & 10" lathes in the handle for the reverse gear case.
$
19.99
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
Only one side of the gear is used. If you flip it you have a brand new gear. Thank you for considering to support our family and small business. Words ... morecannot express how grateful we are for your business no matter how big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
60.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: Cleveland, United States
These are parts from the apron assembly from a 16" South BendCL117E lathe.
$
59.99
Buy It Now
$7.99 Shipping
Condition: Used
Location: Union Grove, United States
South Bend (13").
$
25.99
Buy It Now
$7.55 Shipping
Condition: Used
Location: Berlin, United States
FOR SALE IS THE APRON CLUTCH STAR KNOB AND RETAINING SCREW OF A 9' SOUTH BEND LATHE MODEL A IN VERY GOOD CONDITION. IT WILL ALSO FIT MODEL B AND 10K ... moreLATHES. THE RETAINING SCREW HAS A LEFT HAND THREAD. SHAFT INCLUDED. YOU WILL GET THE PARTS JUST LIKE YOU SEE IT IN THE PICTURE. SEE MY OTHER AUCTIONS FOR MORE LATHE PARTS AND OTHER INTERESTING ITEMS. PAYMENT: Is expected within 7 days. I'm PayPal Verified) IF YOU HAVE A PAYPAL CONFIRMED SHIPPING ADDRESS THAT THE CARRIER WILL DELIVER TO; otherwise please pay a different way. I accept cashier's check. Or credit card by phone to my merchant account.MC, VISA,AMEX,DISCOVER) Remember to give your shipping address and phone# FOR INTERNATIONAL BUYERS PAYPAL ACCOUNT REQUIRED. BUYER TO PAY CUSTOM FEES IF ANY REQUIRED. SHIPPING: For this item will be $3.99 USPS FIRST CLASS Mail with Delivery Confirmation. I ship most items the next weekday after receiving payment. i will combine shipping to save you money if you buy more items within a week- as long as they go together in the same box. QUESTIONS: HOME PHONE/FAX: 954) 428-6575 CELL PHONE: 954)415-9744 PLEASE CALL any day from 8 a.m to 10 p.m. Eastern time. THANK YOU FOR LOOKING AT MY AUCTIONS. Click Here. Double your traffic. Try Vendio Gallery Risk FREE!
$
14.99
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
South Bend 10L Heavy 10 Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are ... morefor your business no matter how big or small your contribution is. THANK YOU
$
143.10
Buy It Now
Free Shipping
Condition: Used
Location: Sterling, United States
Removed from a complete and running 13" South Bend lathe. This lever came off the top of the gearbox. Comes as shown and is ready to install and use. ... moreShips free anywhere in USA.
$
27.99
Buy It Now
$7.25 Shipping
Condition: Used
Location: Baltimore, United States
SOUTH BEND 9" 10K METAL LATHE IDLER CHANGE GEAR BOLT BUSHING STUD ASSY EXCELLENT CONDITION Normal 0 false false false MicrosoftInternetExplorer4 ... moreIF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE EVERY PART FOR A 14" ROCKWELL/ DELTA BAND SAW AND NO TIME TO LIST THEM ALL. IF THERE IS SOMETHING YOU NEED PLEASE SEND ME AND E-MAIL AND I'LL GET IT FOR YOU. I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13e81b1a956-0xf9-
$
14.99
Buy It Now
$5.95 Shipping
Condition: Used
Location: Fort Collins, United States
1962 Print Ad South Bend 10" Lathes with New Welded Steel Floor Legs Tool(location 010324 2e).
$
175.74
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" ... moreEmco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of: 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits up to1/2" 250-204 Heavy Duty Boring Bar Holder, can use both 3/4 and 1" shank boring bars.
 In 

Former Listings  
 
SOUTH BEND LATHE HEAVY 10" SMALL SIDE COVER FOR THE CAST IRON BELL
THIS IS THE SMALL SIDE COVER FOR THE HEAVY 10" SOUTH BEND LATHE WITH THE CAST IRON BELL COUNTER SHAFT HOUSING. EXCELLENT CONDITION. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1431b56c029-0xdc-
SOUTH BEND HEAVY 10 METAL LATHE COMPOUND
HERE'S A SOUTH BEND HEAVY 10 COMPOUND STAMPED C-102RDG THAT CAME TO US IN A BOX OF PARTS. EVERYTHING MOVES FREELY AND OTHER THAN THE DAMAGE TO THE SIDE OF THE T-SLOT APPEARS TO BE IN GOOD SHAPE. SHOWS A LITTLE OVER.040 BACKLASH. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1431b56c025-0xed-
SOUTH BEND LATHE 9 INCH OR 10K LATHE BANJO BRACKET FOR MOUNTING GEARS
ORGINAL SOUTH BEND 9 INCH OR 10K LATHE BANJO BRACKET FOR MOUNTING GEARS. THERE IS A SPOT ON ONE ARM WHERE A GEAR HAS BEEN RUBBING. PLEASE ZOOM IN THE PICTURES.
SOUTH BEND 9 INCH OR 10K LATHE COUNTER SHAFT PULLEY 10" AND 9 1/8" DIAMETER
ORGINAL SOUTH BEND 9 INCH OR 10K COUNTER SHAFT PULLEY. DIAMETER OF PULLEY IS 10" AND 9 1/8" ON THE STEP DOWN FOR CHANGING THE GEAR RATIO. DIAMETER OF THE HOLE IN THE PULLEY IS 3/4" AND IS IN GOOD SHAPE. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1431b56c039-0xf1-
MORSE TAPER 1 & 2 METAL LATHE DEAD CENTER SOUTH BEND ATLAS CRAFTSMAN MACHINIST
MORSE TAPER 1 DEAD CENTER 3" OVERALL LENGTH INCLUDES MORSE TAPER 2 SLEEVE The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
MORSE TAPER 2 MT2 METAL WOOD LATHE CUP CENTER SOUTH BEND ATLAS LOGAN CRAFTSMAN
MORSE TAPER 2 CUP CENTER HARDENED STEEL WITH REPLACEABLE CENTER POINT The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
6" Cushman 3 Jaw Scroll Chuck, Cam Lock D1-4 From South Bend Lathe
6" Cushman 3 jaw chuck in great condition. Total run out is less than.002 inch. I believe it is a cam-lock d1-4. Pin diameter is 5/8" Center line of chuck to centerline of pins is 1 5/8" Chuck body width is 2" If you have any questions just ask. I'll do my best to answer. Posted with
Craftsman 8" 4-Jaw Chuck 1 1/2 x 8tpi - Atlas / Logan / South Bend Metal Lathe
You are looking at a Craftsman 8" 4-Jaw Chuck. Model# 111.21410, 1 1/2 x 8tpi. The chuck is in good condition. Jaws are also in good condition and they turn smoothly. The weight of the chuck is 22 lb and 14.4 oz. Includes original key. I made 17 photos(click on the photos to enlarge) Please view the photos below carefully. To see the condition of what is being sold. PLEASE CHECK OUT MY OTHER AUCTIONS. WHERE I AM SELLING OTHER MACHINIST STUFF: My other items Please scroll down to bottom of the listing. There might be answers to questions I get asked about this item. Combined shipping is available; every next item you buy is half price shipping. If shipping all together will be even cheaper. Then I will return the difference to your account. Buyer will pay the reasonable price. Local pick up is also available. Thank you for looking.
ACCURAX ACURRA X 4 1/4" 3 JAW SCROLL LATHE CHUCK LOGAN SOUTH BEND ATLAS
ACCURAX OR ACCURA X 4 1/4" 3 JAW LATHE SCROLL CHUCK. HAS THREE PLACES FOR THE KEY AROUND THE DIAMETER. MADE IN JAPAN AND HAS 1 1/2" X 8 TPI. USES A STANDARD 5/16" SQUARE CHUCK KEY BUT NONE CAME WITH IT SO NONE SOLD WITH IT. LOGAN SOUTH BEND ATLAS CRAFTSMAN. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
UNION 5" 3 JAW SCROLL LATHE CHUCK NO. U-435 USA MADE LOGAN SOUTH BEND ATLAS
UNION 5" 3 JAW LATHE SCROLL CHUCK NO. U-435 THATS MADE IN THE USA. HAS 1 1/2" X 8 TPI. THE PICTURES SHOW THERE IS A SMALL CHIP OUT OF ONE THE JAWS. USES A STANDARD 1/4" SQUARE CHUCK KEY BUT NONE CAME WITH IT SO NONE SOLD WITH IT. LOGAN SOUTH BEND ATLAS CRAFTSMAN. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
5c Collet 5/16" for South Bend,Atlas,Logan Lathe
Up for auction is a 5c collet in 5/16" size. No mfg. name on collet. Condition is very good and has both internal and external threads which are in excellent condition. Storage container included. Shipping will be $5.80.
Lathe 2 MT Morse Taper Crotch Center Craftsman Atlas South Bend Logan
All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. International Bidders Please Inquire About Shipping Cost Prior To Bidding SOTTOF SALES Older Craftsman Brand in good shape. Body is 2" dia. D3921.2 EBAY AUCTION POLICIES: Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship ... moreFedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE 8 PC CENTERS LOT #2 MT SHANKS WOOD+METAL
ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE 8 PC CENTERS LOT#2 MT SHANKS WOOD+METAL Click to Enlarge FINE USED 8 PIECE LOT OF METAL AND WOOD DEAD CENTERS. ALL WITH#2 MORSE TAPER SHANKS. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
ENCO MT2 LATHE LIVE CENTER ATLAS CRAFTSMAN LOGAN SOUTH BEND ETC.
ENCO MT2 LATHE LIVE CENTER ATLAS CRAFTSMAN LOGAN SOUTH BEND ETC. Brand Enco, Packaging None Condition Good Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
6A JACOBS TAIL STOCK DRILL CHUCK W JT-33 TAPER SOUTH BEND ATLAS CRAFTSMAN LATHE
6A JACOBS TAIL STOCK DRILL CHUCK WITH JT-33 TAPER 0-1/2" CAPACITY. EXCELLENT CONDITION. OPERATES SMOOTHLY WELL TAKEN CARE OF. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK ... moreAND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
JACOBS 14N SUPER BALL BEARING TAILSTOCK CHUCK MT2 SOUTH BEND ATLAS LATHE
14N JACOBS SUPER BALL BEARING TAILSTOCK CHUCK 0-1/2" MT-2 MOUNT CHUCK SHOWS VERY VERY LITTLE WEAR. THE ARBOR IS NEW NOTE THE ITEM HOLDING THE DRILL CHUCK UP IS NOT IN THIS SALE. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. ... moreThank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS DNWTRO@ATT.NET
8" Face Plate - Atlas / Craftsman / Logan / South Bend ? Metal Lathe
You are looking at an 8" Face Plate. I do not know what type of spindle it fits. The thread is 8 TPI and the size of the cylindrical section(photo 6) is 2.0480" You may be able to remake it for a 2 1/4 x 8 TPI spindle. This plate weighs 6lb. 11oz. Please make sure that this face plate will work for you before bidding. I made 6 photos(click on the photos to enlarge) Please view the photos below carefully. To see the condition of what is being sold. PLEASE CHECK OUT MY OTHER AUCTIONS. WHERE I AM SELLING OTHER MACHINIST STUFF: My other items Please scroll down to bottom of the listing. There might be answers to questions I get asked about this item. Combined shipping is available; every next item you buy is half price shipping. If shipping all together will be even cheaper. Then I will return the difference to your account. Buyer will ... morepay the reasonable price. Local pick up is also available. Thank you for looking.
1.5" Lathe Boring Bar Tool Holder Pratt & Whitney Sheldon South Bend Clausing
You are bidding on a nice old super heavy duty boring bar holder. The bore is 1.5" I am not sure what it was made for. It is stamped 12" P&W. Obviously you could modify this to fit any lathe. It measures 1-3/4" from the mounting surface to the center of the bore. The key is 1.25" and the clamping bar is 1.75" wide x.35" thick. The bore is in great shape. I am not sure you can buy them like this any more, but if you could it would be very expensive. Bid with confidence, you won't be disappointed. See my other auctions for more nice old machine tooling. I will be happy to combine shipping.
South bend lathe 9" take up nut and thrust bearing
This is the take up nut and thrust bearing for the 9" south bend lathes model A.B and C in good used condition. Happy Bidding!
SOUTH BEND LATHE 9" OR 10K BELT TENSION LEVER AND TURN BUCKEL WITH PIVOT PIN
ORGINAL SOUTH BEND 9 INCH OR 10K BELT TENSION LEVER WITH TURN BUCKEL AND PIVOT PIN. GRAY PAINT HAS BEEN PAINTED OVER WITH RED. NICKS IN PAINT. TURN BUCKEL THREADS IN AND OUT.
South Bend Heavy 10 ? Lathe Steady Rest
South Bend 10 Lathe Steady Rest I listed this incorrectly earlier as a 9" steady- Seems to be a 10" steady. Please see the specific dimensions to verify base width is 5" Center of v pism is offset 9/16" from the leading edge, its measure 4-5/8" from base flat to parallel flat on clamp in middle of part- Upper casting marked 126 NR 1 and lower casting is marked 9- 126 125 os No chips breaks or repairs.Original Undoctored Condition In good condition Just needs a cleanup- If you find the item incorrectly described or not what you want. Please contact me within a week of receiving the item and I will refund the full item price, not including shipping, when it is returned. return terms apply to domestic purchases only) I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple ... morepurchases. I'll gladly entertain alternative shipping methods other than those listed in the description.
Jacobs Metal Lathe Drill Chuck 1 1/2" X 8 tpi South Bend Atlas Logan w/ Key 58B
Jacobs Metal Lathe Drill Chuck 1 1/2" X 8 tpi South Bend Atlas Logan w/ Key 58B in excellent working condition. 1/8" to 5/8" I have a Logan 10" 1821. South Bend 9A and 9C and a 10" Atlas metal lathe that I will be listing parts from this month so if you need anything from one of these lathe message me through ebay and I will list the parts you need. This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine
OILING THE LATHE SOUTH BEND LATHE WORKS BULLETIN H-2 MANUAL INSTRUCTION BOOK
Nice original publication of South Bend Lathe Works Bulletin H-2. Oiling The Lathe, the Importance of Adequate Lubrication, by South Bend Lathe Works, printed 1947. This is the original paperback version, not the reprinted version. Cover and pages are in good condition. Manual is complete and intact. 20 pages. Nice addition. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Vintage Metal Lathe 5" 4 Jaw Scroll Chuck 1 1/2" X 8 tpi South Bend Logan
Vintage 5" 4 Jaw Metal Lathe Scroll Chuck 1 1/2" X 8 tpi South Bend Atlas Logan in excellent working condition. Self centering Jaws I have a Logan 10" 1821. South Bend 9A and 9C and a 10" Atlas metal lathe that I will be listing parts from this month so if you need anything from one of these lathe message me through ebay and I will list the parts you need. This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine
Union 6" 4 Jaw Metal Lathe Chuck 1 1/2" X 8 tpi South Bend Atlas Logan w/ Key
Union 6" 4 Jaw Metal Lathe Chuck 1 1/2" X 8 tpi South Bend Atlas Logan w/ Key and reversible Jaws in excellent working condition just needs a good cleaning. Jaws work independently. I have a Logan 10" 1821. South Bend 9A and 9C and a 10" Atlas metal lathe that I will be listing parts from this month so if you need anything from one of these lathe message me through ebay and I will list the parts you need. This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-143216bc948-0xfa-
1/2" SHANK TAILSTOCK DRILL PAD TURRET TOOL 4 SOUTH BEND LOGAN LATHE MACHINIST
Nice 1/2" shank drill pad. Shank is 1 5/8" long. Diameter of face is 2 1/8" 3/16" thick. All in good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1432182b911-0xee-
46 TOOTH CHANGE GEAR SOUTH BEND LATHE 9 or 10K BOXFORD ~ EXCELLENT CONDITION
46 TOOTH CHANGE GEAR SOUTH BEND LATHE 9 or 10K BOXFORD ~ EXCELLENT CONDITION Description SOUTH BEND LATHE CHANGE GEAR OR 9 or 10k INCH LATHE PART#PT32K46NK ~ 46 TOOTH ~ 46 TEETH ~ 2 5/8" DIAMETER ~ 9/16" BORE ~ 1/8" KEYWAY ~ 3/8" THICK ~ SOUTH BEND LATHE PART NUMBER: PT32K46NK This gear is in very good useable pre-owned condition. There is no visible wear on the teeth. The bore is undamaged and there is no rust or corrosion. I've provided flash and no flash photos and both sides of the gear so you can see details and conditon. Please see my other auctions for more South Bend gears. We can combine purchases to save on shipping. If you buy more than one gear, please wait for our invoice with combined shipping. Please ask questions before bidding. International buyers- please email for an exact shipping quote for your ... morecountry. All sales are final- no returns. Terms of Sale We check our items carefully and include plenty of photos so buyer can make an informed decision. Please ask questions before bidding as all sales are final. We accept payment by PayPal- no e-checks please. We ship within 2 working days after payment clears, Payment must be received within 3 days of auction close or item will be relisted and appropriate feedback left.
Jacobs 3 Jaw Headstock Chuck 58B 1-1/2 x 8 tpi ATLAS Craftsman South Bend Lathe
Atlas Craftsman South Bend metal lathe Headstock Jacobs 3 jaw chuck Theaded 1-1/2"8 This is in excellent uncleaned. Undoctored condition- Good serviceable tool No Reserve. I will combine shipping on multiple purchase- and will invoice at end of auction.
South bend lathe heavy 10" spindle cone pulley and gear
This is the spindle cone pulley and gear for the heavy 10" south bend lathe in good used condition. very nice. Happy Bidding!
SOUTH BEND LATHE 9" SADDLE,GIB AND WIPERS FOR MODEL A
THIS IS THE SADDLE.GIB AND WIPERS FROM A 9" SOUTH BEND MODEL A LATHE. IT HAS SOME WEAR BUT NOT TERRIBLE LIKE SOME. NEEDS A CLEANING AND PAINT. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
South bend lathe heavy 10" cast iron base with counter shaft,motor no covers
This is the cast iron bell from a heavy 10" south bend lathe. This comes with the counter shaft.3 phase original motor. There is no belt tension assembly,covers or motor pulley. I have four of these bases here in case anyone wants to make a deal on a pair of them to make a table or bench.Must be paid for by paypal. This must be picked up and I will help load it. Good luck and happy bidding!
Machinists Williams LH Lathe Tool for South Bend 9" Atlas 10-12
worx 100% see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all ... moreaction with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump
VINTAGE SOUTH BEND HOW TO RUN A METAL LATHE BOOK 1954 CLEAN
DESCRIPTION: USED. SOUTH BEND MANUAL. IT DOES NOT LOOK LIKE IT HAS EVER BEEN OPENED. One-Shot Machine Oiler. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL ... moreOR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATL
South Bend Heavy 10" Lathe Rack Screw
For sale is a rack screw for South Bend Heavy 10" The length of the screw is 26" Shipping will be $20.00 Thanks for looking and God Bless!
South Bend Heavy 10 Lathe Mounting Screws for Transmission / Lead Screw Bearing
Here is the complete set of 5/16"18 x 7/8" long screws for mounting the gearbox and/or leadscrew bearing to the ways. 3 screws for the gearbox and 2 for the end bearing. The threads are excellent on all five of them and the head slots are good on all of them. Garden-variety socket head bolts won't work for this application unless the head diameter and height are machined to fit. Avoid the time/hassle and get these OEM South Bend specification screws!
South Bend Heavy 10 Lathe Headstock Back Gear and Handle Complete
Heavy 10 backgear and handle. Turned great in the lathe. Not slopped out. The small end teeth do have visible wear(see pictures) and the large end teeth look excellent. Taper pin to assemble handle to shaft is included and in great shape. $11.30 shipping to the 50 states/territories.
South Bend Heavy 10 Lathe Compound T-NUT 3/8-16 threads
Fits compound slot with 1.375" bottom. And about.99" neck. 1.5" long. 1/2" thick. Your item(s) will be carefully packed and shipped. We do not ship internationally.
Lathe Spindle Nose Adapter South Bend Heavy 10 to A2-6" Chuck
Spindle nose adapter mounts on a 2& 1/4" 8 thread spindle with a 2.260 rear pilot diameter. Such as South Bend Heavy-10 and many other lathes. Front side has ASA A2-6 features for that style chuck(taper boss gage point = 4.188" diameter, flange has six 1/2"13 tapped holes on a 5.125" bolt circle. Max part o.d. is 7&1/2" Outer flange is 7/16" thick. Overall thickness of the adapter is 1&5/16" All functioning surfaces are in excellent conditions, there are some chuck marks on the non-critical flange o.d. as seen in the picture. Shipping $11.30 to the 50 states/territories.
South Bend 14 1/2"x40" Metal Lathe Chuck Face Plates Collet Closer More Gunsmith
Used South Bend metal lathe model#CL129C 14 1/2" by 40" 230v 3ph motor, thread dial, and ways look decent with a minor lip and scratch's, the back way has some dings, forward-reverse switch. The back lash on cross is 1/4 turn and back lash on compound is 1/4 turn. Comes with lever collet closer with nose protector, live center, dead center for headstock, collet rack, carriage stop, four position tool post, telescopic steady rest, Jacobs Super drill chuck for tail stock, 7" 3 jaw chuck, 9" four Jaw chuck,and also 13" + 8" face plates. Lathe decent condition, all functions work fine. Has v belt drive to flat belt drive with back gear. Paint is worn and chipped. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Email me for ... morea shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally, so the auction may be cancelled due to local sale. Please read our feedback, 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction to avoid neg feedback. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified, so please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14330caf616-0xe9-
NICE LOT OF 3 BORING BAR CUTTERS FOR ATLAS CRAFTSMAN SOUTH BEND METAL LATHE
Nice Lot of 3 Boring Bar Cutters for an Atlas. Craftsman, or South Bend Metal Lathe. Boring Bars measure 3/8" thick- 5 7/16" long, 1/4" thick- 4 3/4" long and 1/4" thick- 4 15/16" long. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOT OF 2 SPIRAL END MILLS FOR ATLAS CRAFTSMAN SOUTH BEND METAL LATHE
Lot of 2 Spiral End Mills for an Atlas. Craftsman or South Bend Metal Lathe. Units Measure- Arbor 3/8" with a 5/16" blade and 5/16" arbor with a 5/8" blade. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14331c6b737-0xff-
South Bend 9" Lathe Compound T-NUT M14x1.5 threads fits Asian AXA
Fits compound slot with 1.25" bottom. And about.87" neck. 1.5" long. 1/2" thick. Your item(s) will be carefully packed and shipped. We do not ship internationally.
SOUTH BEND 9" LATHE MOTOR SWITCH MOUNT BRACKET
South Bend 9" Lathe Motor Switch Mount Bracket. Includes mounting hardware. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE ORIGINAL SOUTH BEND 9" 10K LATHE COUNTERSHAFT ASSEMBLY
Nice Original Countershaft Assembly for a South Bend 9" 10K Lathe. Bearings feel nice and tight. Pulleys run straight and true. One of the oiler caps does not spring open/shut as it should. Over all in very nice condition. I have added insurance to the cost of shipping. For shipments in the US and Canada a $3.05 rate has been added. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE MT2 DEAD CENTER FOR ATLAS CRAFTSMAN SOUTH BEND LOGAN METAL LATHE
Nice MT2 Dead Center for Metal Lathe Machinist. Unit measures 3 15/16" If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE LOT OF 2 MT2 DEAD CENTERS FOR ATLAS CRAFTSMAN SOUTH BEND LATHE
Nice Lot of 2 Dead Centers for an Atlas. Craftsman or South Bend Metal Lathe. Dead Centers measure 4" long and 4 9/16" long. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE - ORIGINAL SOUTH BEND 9" METAL LATHE REVERSE TUMBLER GEAR BRACKET
Nice- Original South Bend reverse bracket assembly with bolt for a 9" South Bend lathe. All in good order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
SOUTH BEND 9 10K LATHE COUNTERSHAFT TENSIONER ADJUSTING ROD - RIGHT HAND THREAD
Nice- Original South Bend countershaft belt tensioning rod for a 9" or 10K South Bend lathe. Measures 4 1/2" total length. Threaded portion is 1 5/8" long, 3/8" diameter, 16 tpi, right hand thread. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
SOUTH BEND 9" METAL LATHE HEADSTOCK HARDWARE OILERS GITS
Set of Gits headstock oilers for a South Bend 9" lathe. Spring loaded lids work as they should. Strong return on springs. Threads are 5/16" diameter. All in good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOT OF 2 5C COLLETS 4 SOUTH BEND 10" HEAVY LATHE 1/8 13/32
Original South Bend 5C Collets. Fits South Bend Heavy 10" Lathe. Both are Stamped with"SOUTH BEND 5C" One is also stamped"1/8" and the other is"13/32" Threads are in fine order. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOT OF 4 UNUSED CUTTING BITS FOR ATLAS CRAFTSMAN SOUTH BEND LATHE
Lot of 4 Unused Cutting Bits for Atlas. Craftsman or South Bend Lathe. Three cutting bits package are opened, unsed and measure 3/8" in diameter. The fourth package is not opened and is to believe to be 3/8" diameter aswell. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
VERY NICE SOUTH BEND 9" LATHE 3C LEVER ACTION COLLET CLOSER HLC105N
Very Nice Original 3C Lever Action Collet Closer for a South Bend 9" Metal Lathe. Unit will accept 3C. 3 and 1A collets. Stamped with"HLC 105N" Collet threads are in nice condition. This is a complete unit and in very nice condition. I have added insurance to the cost of shipping. For shipments in the US and Canada a $5.10 rate has been added. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
SOUTH BEND 9" LATHE 3C 3 COLLET RACK AND BAR HOLDER
Collet Rack and Bar Holder for a South Bend 9" Lathe. Unit will fit 3C. 3 and 1A collets. All looks to be original except for the tray which was made with wood and appears to be a nice job. Unit mounts directly on a South Bend 9" Bed V groove. I have added insurance to the cost of shipping. For shipments in the US and Canada a $3.05 rate has been added. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE MOTOR PULLEY W/ REDUCER FOR ATLAS CRAFTSMAN SOUTH BEND LATHE 3/4" - 5/8"
Nice Motor Pulley with reducer for a Metal Lathe. Bore Measures 3/4" Diameter. Comes with Reducer to 5/8" Diameter of pulley is 4 1/4" Stamped with 635. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
South Bend Lathe 10K Foot Base or Bed - 10 Inch
Base/Bed Foot from a South Bend 10K. Nice Condition. See Pictures for Details. I am selling almost every part from a South Bend 10K Lathe. So please check out my other items. I am happy to combine shipping to save you money. I have 100% Feedback and want everyone to be happy with their purchase. So bid with confidence.
South Bend Lathe 10K Compound Rest Parts - Swivel Gibs Base - 10 Inch
Lot of Compound Rest Parts from a South Bend 10K. Nice Condition. See Pictures for Details. I am selling almost every part from a South Bend 10K Lathe. So please check out my other items. I am happy to combine shipping to save you money. I have 100% Feedback and want everyone to be happy with their purchase. So bid with confidence.
South Bend Lathe 10K Compound Feed Dial Parts Screw Nut - 10 Inch
Lot of Compound Feed Parts from a South Bend 10K. Nice Condition. See Pictures for Details. I am selling almost every part from a South Bend 10K Lathe. So please check out my other items. I am happy to combine shipping to save you money. I have 100% Feedback and want everyone to be happy with their purchase. So bid with confidence.
South Bend Lathe 10K Collet Closer - Lever Action - 10 Inch
Lever Action Collet Closer from South Bend 10K. Nice Condition. See Pictures for Details. I am selling almost every part from a South Bend 10K Lathe. So please check out my other items. I am happy to combine shipping to save you money. I have 100% Feedback and want everyone to be happy with their purchase. So bid with confidence.
South Bend Lathe 10K Drive Pulley Set - 10 Inch Flat Belt
Drive Pulley Set from South Bend 10K. Nice Condition. See Pictures for Details. I am selling almost every part from a South Bend 10K Lathe. So please check out my other items. I am happy to combine shipping to save you money. I have 100% Feedback and want everyone to be happy with their purchase. So bid with confidence.
South Bend Lathe 10K Tail Stock - 10 Inch Tailstock
Tail Stock from South Bend 10K. Note that clamp bolt is included. But I'm not sure if it is the correct length. See Pictures for Details. I am selling almost every part from a South Bend 10K Lathe. So please check out my other items. I am happy to combine shipping to save you money. I have 100% Feedback and want everyone to be happy with their purchase. So bid with confidence.
South Bend Lathe 10K Large Lot - Rod Bearing Screw Nut Shaft Spring Gear Apron
Large Lot of South Bend 10K Small Lathe Parts& Hardware. All kinds of Specialty Screws. Shafts, Pins, bearings, Etc, Etc, Etc. See Pictures for everything included. I am selling almost every part from a South Bend 10K Lathe. So please check out my other items. I am happy to combine shipping to save you money. I have 100% Feedback and want everyone to be happy with their purchase. So bid with confidence.
South Bend Lathe 10K Large Lot - Spindle Banjo Motor Mount Apron Guard Bearings
Large Lot of South Bend 10K Lathe Parts. See Pictures for everything included. All look to be in nice condition. I am selling almost every part from a South Bend 10K Lathe. So please check out my other items. I am happy to combine shipping to save you money. I have 100% Feedback and want everyone to be happy with their purchase. So bid with confidence.
South Bend Lathe 10K Headstock Pullley Gear Cover - Head Stock Cover - 10 inch
Headstock Pulley/Gear Cover from a South Bend 10K Lathe. I am selling almost every part from a South Bend 10K Lathe. So please check out my other items. I am happy to combine shipping to save you money. I have 100% Feedback and want everyone to be happy with their purchase. So bid with confidence.
South Bend Lathe 10K Headstock Casting - Head Stock - 10 inch
Headstock Casting from a South Bend 10K Lathe. I am selling almost every part from a South Bend 10K Lathe. So please check out my other items. I am happy to combine shipping to save you money. I have 100% Feedback and want everyone to be happy with their purchase. So bid with confidence.
South Bend Lathe 10K Saddle - 10 inch
Saddle from a South Bend 10K Lathe. I am selling almost every part from a South Bend 10K Lathe. So please check out my other items. I am happy to combine shipping to save you money. I have 100% Feedback and want everyone to be happy with their purchase. So bid with confidence.
South Bend Lathe 10K Quick Change Gear Box - 10 inch (may fit 9 inch)
Quick change gear box from a South Bend 10K Lathe. All gears look to be in nice condition. I believe some people also use this on the 9 inch lathes. Buy not sure what the differences are. I am selling almost every part from a South Bend 10K Lathe. So please check out my other items. I am happy to combine shipping to save you money. I have 100% Feedback and want everyone to be happy with their purchase. So bid with confidence.
ORIGINAL SOUTH BEND LATHE WORKS 9 10K LATHE TOOL POST APRON WRENCH 3/8" PART 253
Nice- Original South Bend combination tool post and carriage lock wrench for a 9" or 10K South Bend lathe. Stamped SOUTH BEND LATHE on one side and No. 253 on the other. Box and open end are both 3/8" All in good order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1434520efb3-0x103-
CLARK 60R RIGHT HAND TURNING TOOL BIT HOLDER 4 SOUTH BEND ATLAS CRAFTSMAN LATHE
Very Nice- Original Clark right hand turning tool bit holder. Tool is stamped ROBERT H. CLARK COMPANY BEVERLY HILLS CALIF. U.S.A. on one side and CLARK TOOL HOLDER NO. 60R DROP FORGED IN U.S.A. PAT. PEND. on the other. Shank is 3 3/4" long. 7/8" high and 3/8" thick. Tool holder accepts 5/16" cutters. In very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
WILLIAMS #31-R LATHE CUT-OFF TOOL HOLDER SOUTH BEND LOGAN HARDINGE ETC.
WILLIAMS#31-R LATHE CUT-OFF TOOL HOLDER SOUTH BEND LOGAN HARDINGE ETC. Brand Williams, Packaging None Condition Excellent Quantity 1 1 3/16" x 1/2" Shank. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
7/8" DIA LATHE MANDREL WITH 5/16" KEYWAY ATLAS CRAFTSMAN LOGAN SOUTH BEND ETC.
7/8" DIA LATHE MANDREL WITH 5/16" KEYWAY ATLAS CRAFTSMAN LOGAN SOUTH BEND ETC. Brand Unknown Packaging None Condition Good Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LOT OF 10 FORM ROL #GKR216 KNURL KNURLING ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE
LOT OF 10 FORM ROL#GKR216 KNURL KNURLING ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE Brand Form Rol Packaging In Tube Condition Excellent Quantity 10 1/4" Bore. 1/4" Thickness. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
ARMSTRONG #71-R LATHE CUT-OFF TOOL HOLDER SOUTH BEND LOGAN HARDINGE ETC.
ARMSTRONG#71-R LATHE CUT-OFF TOOL HOLDER SOUTH BEND LOGAN HARDINGE ETC. Brand Armstrong, Packaging None Condition Very Good Quantity 1 1 3/16" x 9/16" Shank. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
ARMSTRONG NO. 2050 THREADING TOOL HOLDER SOUTH BEND LOGAN CRAFTSMAN METAL LATHE
ARMSTRONG THREADING TOOL HOLDER NO. 2050 3/8" X 39/64" X 4-7/8" LON G MODIFIED TO FIT 6" ATLAS& CRAFTSMAN LATHES The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Vintage South Bend Lathe 3201 LT1 Pin Spanner Wrench
Vintage South Bend Lathe 3201 LT1 Pin Spanner Wrench Item Description Shipping and Payment Spuds will combine shipping on multiple items when possible. Please feel free to e-mail me if you have any questions. Alaska. Hawaii along with US Territories and APO's shipped via USPS Priority Mail may require additional shipping charges. INTERNATIONAL BIDDERS. WE WILL ACCEPT ONLY U.S. FUNDS. Please check out Spuds' other auctions. New items added every day. inkfrog terapeak. I000000. InkFrog Analytics. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1434520f0be-0xef-
SOUTH BEND 9" LATHE TOOL POST GRINDER & TOOLS
SOUTH BEND 9" LATHE TOOL POST GRINDER& TOOLS Brand South Bend Packaging None Condition Excellent, Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1434520f02b-0xf9-
ACE STRAIGHT NO. 2020-S CUTOFF TOOL HOLDER SOUTH BEND LOGAN CRAFTSMAN LATHE
ACE STRAIGHT CUTOFF TOOL HOLDER NO. 2020-S 3/8" X 3/4" X 5" LONG The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
ST DRILL CHUCK 10MM #2MT for Atlas South Bend Logan lathe mill
This listing is for a ST drill chuck. It is 10MM and has a#2MT shank. It spins freely and is in great shape. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
NICE SET OF WILLIAMS TOOL HOLDERS for Atlas Craftsman South Bend Logan lathe
This listing is for a set of Williams tool holders. 2010-L 2010-R 2010-S. They measure 7/8" X 3/8" and hold 1/4" bits. They are in excellent condition. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
LANTERN TOOL POST for large South Bend Logan Monarch lathe
This listing is for a lathe lantern tool post. It is in great shape. It is 3" tall and 1 1/4" in dia. The ring at the bottom is 1.575" The square base is 2" square and 1/4" thick. It holds a 5/8" tool. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
CRAFTSMAN ST TOOL HOLDER 2196 for Atlas Craftsman South Bend Logan lathe
This listing is for a Craftsman tool holder#2196. It measures 7/8" X 3/8" and hold 1/4" bits. It is in excellent condition. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-143464ea8bb-0xf6-
Great Working Vintage South Bend 22X Engine Screw 9" Lathe 30" bed + MANY EXTRAS
Hello. After 64 years of business and 3 generations we have closed our work shop. This South Bend lathe has always been a work horse and I don't believe there is a thing wrong with it. Check each picture to see all the extras that comes with it. I'm the only one in the family that never ran a lathe so please excuse my ignorance by not being able to name all the parts(I believe I have a few wood lathe tools pictured that do not work with this lathe) You can also have the work bench that it has always been mounted on if you want. Feel free to come any day to inspect and test. Please email any questions. Also we get very good commercial shipping rates if you need it shipped. Our zip is 45807. Thanks,Joe Posted with
WILLIAMS NO 0-K KNURLING TOOL HOLDER METAL LATHE ATLAS CRAFTSMAN SOUTH BEND
J.H. WILLIAMS KNURLING TOOL NO. 0-K 11/64" X 11/16" X 5" LONG The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Original 9" South Bend Lathe Catalogue ca.1948
Original 9" South Bend Lathe Catalogue ca.1948 This original ca.1948 catalogue is for the 9" South Bend Lathes. The 36 pages shows the features of the different model of South Bend Lathes. The condition of this original fully illustrated catalogue is very good. Buyer to pay shipping. Ca. residents to add sales tax or provide resale number. Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Fixed Shipping Charges. International shipping: Fixed Shipping Charges. Shipping Carrier Domestic International Shipping Locations Usps First-Class $4.00- Usps First-Class Intl- $12.75 Worldwide I will ship to: United States. Worldwide a pretty image. templates with Vendio Sales Manager. Vendio provides powerful selling automation for sellers of all sizes.
South Bend Lathe Model SB100, 18K 8" X 18" Variable Speed Metal Lathe
You are viewing a very nice South Bend 8K 8" X 18" variable speed metal lathe model SB1001. This machine was purchased in August of 2012 and used very little. It recently quit running. I believe the problem is in the electrical control board however I am not positive. You are buying"as is" No tooling comes with machine. Sorry. I will not ship the lathe. It must be picked up in Salineville, Ohio within one(1) week of the close of the auction. I just purchased another one so this one must go! This is a great deal! I will take full payment through PayPal. However I would prefer cash upon pickup. No money order, personal checks or certified checks. If you have any questions. Please contact me through ebay. Thank you for looking. God Bless, Jason Posted with
3/4" Shank DA100 Collet Tap Drill Holder Atlas Logan Gunsmith Lathe South Bend
When I got this. It had a 1/8" DA100 collet in it that seemed to fit well. Beyond that, I don't know much about it. Would make a great little"small item" chuck. I actually kept the other one for that purpose) Shipping: Generally. The shipping price that is quoted is the cheapest method I could find when I listed the item. If you think I messed up, by all means, ask! I will try to offer discounts on multiple purchases for shipping if it will save you a significant amount of money. Payment: Please try to pay within 48 hours of auction close unless prior arrangements have been made. I try to let pictures speak for the item. If you have any questions about the item. Or shipping or payment, please do not hesitate to contact me through Ebay. Check out for more great items! I combine on shipping! Powered by
Atlas Lathe Shaper Toolholder Tool Holder Armstrong South Bend Lot 1
A very nice shaper tool holder for your Atlas(or other) shaper. In good condition. Shank is 3/8 x 15/16(approximate) Shipping: Generally. The shipping price that is quoted is the cheapest method I could find when I listed the item. If you think I messed up, by all means, ask! I will try to offer discounts on multiple purchases for shipping if it will save you a significant amount of money. Payment: Please try to pay within 48 hours of auction close unless prior arrangements have been made. I try to let pictures speak for the item. If you have any questions about the item. Or shipping or payment, please do not hesitate to contact me through Ebay. Check out for more great items! I combine on shipping! Powered by
LOT OF 2- 3 & 3C COLLETS FOR A SOUTH BEND 9" METAL LATHE
Lot of 2 collets for a South Bend 9" Metal Lathe. Collets are"SOUTH BEND-3 1/4" And"ROYAL 3C 7/32" If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
FURNAS ELECTRIC FORWARDING AND REVERSING SWITCH FOR SOUTH BEND LATHE
Nice Furnas Electric Made for South Bend Forward/ Reversing Switch. Style RSB4. I would recommend rewiring unit. And unit was acquired without case bolts. Will work on other machines. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
#116 USED 15/16 SOUTH BEND 5C COLLET FOR LATHE GRINDER MILL INDEX HEAD
This is a nice used South Bend brand 5C collet size 15/16. The inside bore is in good shape. The keyway and threads are also in good shape. This collet is in nearly perfect condition. It has seen very little use. I am listing a large amount of 5C collets, so be sure to check out my other items. I will be happy to combine shipping. If you buy multiple 5C collets from me, shipping will be $5.50 for the first, $.50 for each additional. If you need a specific size that you do not see in my items. Please ask as it will take me a while to get all of these collets listed. My item number 116. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1434ecbef57-0x103-
VINTAGE SOUTH BEND HOW TO RUN A METAL LATHE BOOK 1952 SPIRAL BOUND
DESCRIPTION: USED. SOUTH BEND MANUAL. One-Shot Machine Oiler. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SE
EXCELLENT ORIGINAL SOUTH BEND 9 10K LATHE COLLET SPANNER WRENCH 1/4" PIN 3201NK1
Excellent Condition- Original South Bend spanner wrench for a South Bend 9" or 10K lathe headstock spindle protector. Stamped SOUTH BEND LATHE on one side and T 3201NK1 on the other. Pin diameter is 1/4" In excellent condition. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE LOT OF 20 METAL 5/16" CUTTING TOOL BITS 4 ATLAS CRAFTSMAN SOUTH BEND LATHE
Nice- Lot of twenty(20) 5/16" metal cutting bits. New and used. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
GRAND # 210 LATHE COLLET CHUCK 1 1/2" x 8 TPI ATLAS CRAFTSMAN LOGAN SOUTH BEND
GRAND# 210 LATHE COLLET CHUCK 1 1/2" x 8 TPI ATLAS CRAFTSMAN LOGAN SOUTH BEND Brand Grand Packaging None Condition Excellent Quantity 1 Takes B& S# 21 Collets. The handle is removable. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
-3/8'' DOG PLATE 1-1/2 X 8TPI FOR ATLAS CRAFTSMAN SOUTH BEND 9 10 12'' LATHE
UP FOR SALE IS A 5-3/8' DIA. DOG PLATE WITH 1-1/2 X 8T.P.I. THREAD. IT WILL FIT ATLAS CRAFTSMAN 10 12' LATHES. SOUTH BEND 9 10' AND OTHERS. IT IS IN VERY GOOD CONDITION. 1 LATHE DOG- 1-1/2' CAP. 1 LATHE DOG- 7/8' CAP. 1 LATHE DOG- 1/2' CAP. YOU WILL GET THE PART JUST LIKE YOU SEE IT IN THE PICTURE. SEE MY OTHER AUCTIONS FOR MORE LATHE PARTS AND OTHER INTERESTING ITEMS. PAYMENT: Is expected within 7 days. I'm PayPal Verified) IF YOU HAVE A PAYPAL CONFIRMED SHIPPING ADDRESS THAT THE CARRIER WILL DELIVER TO; otherwise please pay a different way. I accept cashier's check. Or credit card by phone to my merchant account.MC, VISA,AMEX,DISCOVER) Remember to give your shipping address and phone# FOR INTERNATIONAL BUYERS PAYPAL ACCOUNT REQUIRED. BUYER TO PAY CUSTOM FEES IF ANY REQUIRED. SHIPPING: For this item will be ... more$11.35 USPS PRIORITY Mail with Delivery Confirmation. Insurance(if desired) will be an additional $1.75 I ship most items the next weekday after receiving payment. i will combine shipping to save you money if you buy more items within a week- as long as they go together in the same box. QUESTIONS: HOME PHONE/FAX: 954) 428-6575 CELL PHONE: 954)415-9744 PLEASE CALL any day from 8 a.m to 10 p.m. Eastern time. THANK YOU FOR LOOKING AT MY AUCTIONS. Click Here. Double your traffic. Try Vendio Gallery Risk FREE!
Jacobs 59B Lathe Headstock Chuck (suit South Bend, Atlas, Logan, poss Boxford)
This is a Jacobs 59B Headstock Chuck. It can be screwed onto the spindle nose of suitable lathes and used to grip slender items. Drill bits etc. I bought this to fit my Boxford lathe but it is an uncomfortably tight fit to screw on the spindle nose. I have since been told that only the earliest Boxfords have the same American thread form on the spindle nose as the South Bend lathe that the Boxford was based on. It should fit South Bend. Atlas, Logan and very early Boxford lathes with a 1.5 inch by 8 tpi spindle nose. It may fit others too. It has been dismantled and cleaned and moves easily. The chuck key looks new and I have fitted a new sleeve. There are larger versions of the photos at http:www.hockerley.50webs.com/j59b/ I am happy to post internationally. Price varies a lot with the service so please contact me for options.