In 
 
Order by: 
Available to: 
Price: 
 - 
$
16.99
Buy It Now
Free Shipping
Condition: Used
Location: Madison Heights, United States
This is a 1949 ad for a South Bend Lathe!
$
9.99
Buy It Now
Free Shipping
Condition: Used
Location: Bridgeport, United States
For sale by Mirluck VINTAGE MAGAZINE ADVERTISEMENT Very good condition Measures approximately 13 by 10.5"
$
115.33
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: Brand new No time wasted with shims All working parts hardened and precision ground Wedge type tool post are precision engineered to assure ... morerepeatability accuracy Wedge type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: .
$
40.00
Buy It Now
Free Shipping
Condition: Used
Location: Point Pleasant Beach, United States
$
40.00
Buy It Now
Free Shipping
Condition: Used
Location: Rochester, United States
Southbend Lathe 9"jr Rocker Gear Studs .625&.375dia 1.51oal. Condition is Used. Shipped with USPS First Class.
$
16.99
Buy It Now
Free Shipping
Condition: Used
Location: Madison Heights, United States
This is a 1937 ad for a south bend Lathe Works!
$
50.00
Buy It Now
$10.15 Shipping
Condition: New – Open box
Location: Rochester, United States
Southbend Lathe 9"jr Change Gear 52t 16dp .625id .50wd NOS UNUSED LOGAN.
$
49.99
Buy It Now
$5.75 Shipping
Condition: Used
Location: Berlin, United States
$
60.00
Buy It Now
Free Shipping
Condition: Used
Location: Tucson, United States
Nice cone pulley and thrust/take-up bearings from a 9" South Bend Workshop model metal lathe. In good condition and come as pictured. This lathe ... morewas used for wood most of its life. As you can see. The gear is nearly new. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
$
24.99
Buy It Now
$5.00 Shipping
Condition: Used
Location: Pomona, United States
Fascinating and rare early Vintage wooden world map globe pen and pencil desk holder. MEASURES height: 4 1/2" length: 3 1/8" width: 3" ... moreCONDITION very good vintage condition- normal age traces On Mar-25-13 at 02:36:15 PDT. Seller added the following information:
$
19.99
Buy It Now
$13.65 Shipping
Condition: Used
Location: Nashville, United States
As shown, in sound condition, missing oiler, for single tumbler quick change 13" lathes only.
$
8.89
Buy It Now
$3.65 Shipping
Condition: Used
Location: Nashville, United States
Used apron oil trough removed from a 1931 South Bend 11" lathe model 164-S with underneath drive and Series "N" apron. Overall good condition showing ... morelight wear.
$
90.00
Buy It Now
$15.00 Shipping
Condition: Used
Location: Rochester, United States
Southbend Lathe Early 16" Apron Longitudinal Feed Handle. 625id. Condition is Used. Shipped with USPS Priority Mail.
$
9.97
Buy It Now
Condition: Used
Location: Stockton, United States
NOT a Reproduction - NOT a Reprint. We often get one of a kind material nobody else has. For example rare low print trade publications.
$
6.99
Buy It Now
Free Shipping
Condition: New
Location: McMinnville, United States
Classic Archives Listing Please visit our page for more information about us and our products! The Milling Machine Reference Library Included: 7 hours ... moreof Instructional Videos Included: How To Manuals and Guides Included: Instructional Textbooks Included: Reference Manuals and Historic Guides Selected and organized by the engineering department at ADV Plans. LLC. 3 Gigabyte Collection on one data DVD This collection includes video in.mp4 format. This is a data DVD can be played in any computer. It cannot be played in a DVD player attached to your TV. Additional Technical Manuals We Offer: South Bend Lathe Manuals and Publications: 350 Additional Lathe Manuals of Other Manufacturers: Learn How to Use A Lathe: Learn How to Weld: Learn How to Use Machinery: All Books are in PDF format. For easy searching and printing Full breadth of milling topics are covered. Such as Milling Machine Shop operations, Jigs and Fixtures, Screw Making, and more. Scroll down for a full list. 7 hours of instructional videos on important topics about basic skills in the field. If you have any interest in becoming a getting a home milling machine and are looking to get into the hobby. Or if you are a pro, or if you are going to school to become one, this collection of books and guides on machining will enhance your skills regardless of what kind of level you are at. The historical books and guides give you a perspective that is hard to capture in a classroom, while the videos are easy to follow for anyone. 15 videos are included on this disk. In.mp4 format that can be played on any computer. These videos combined are about 7 hours long! You can save them to your hard drive. And then place them on your Ipad or tablet or phone, and watch them in your shop at your convenience. They provide a great instruction on proper machining skills and techniques. Great tips and tricks! CNC Tutorial 1 of 3- Introduction to Machining- Topics covered include Safety. Cutting Tools Material of cutting tools Costs Tool holders and shows parts that hav
$
50.00
Buy It Now
Free Shipping
Condition: Used
Location: Point Pleasant Beach, United States
Lead screw engaging handle.
$
19.09
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: AXA Size Quick Change Tool Post Set for Lathe 6 - 12" 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank tool bits ... moreup to 7/16" Brand new Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 & 11" Nardini TT1000 & TT1200 and many other import lathes Interchangeable With Aloris, Dorian , Yuasa & Phase II It is precision engineered to assure repetitive accuracy No time wasted with shims.
$
140.00
Buy It Now
$16.10 Shipping
Condition: Used
Location: Nashville, United States
Functions flawlessly.
$
16.99
Buy It Now
Free Shipping
Condition: Used
Location: Madison Heights, United States
This is a 1946 ad for a South Bend Lathe Works!
$
35.00
Buy It Now
$11.75 Shipping
Condition: Used
Location: Ottawa, United States
Cast Aluminum.
$
22.00
Buy It Now
Free Shipping
Condition: Used
Location: Huntington Beach, United States
Unbranded LATHE HEX CHUCK KEY.
$
150.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Rochester, United States
Southbend Lathe 6pcs 2A Collets.
$
13.00
Buy It Now
$5.30 Shipping
Condition: Used
Location: North Tonawanda, United States
South bend 9” 10k
$
325.00
Buy It Now
$22.00 Shipping
Condition: Used
Location: Mahwah, United States
Great find they are not sprung all good. YES I KNOW IN THE PICTURES IT SHOWS & COLLETS I am a dope I LEFT ON IN THE BAG Did not see it till I sat down ... moreat the computer. anyway the 1/16 is not pictured it is in excellent condition may fault.
$
60.00
Buy It Now
Free Shipping
Condition: Used
Location: Rochester, United States
Southbend Lathe 9"jr Gear Gaurd Headstock Right. Condition is Used. Shipped with USPS Priority Mail.
$
60.00
Buy It Now
$13.00 Shipping
Condition: Used
Location: Elkin, United States
South Bend Lathe 10” or Light Ten motor mount plate and countershaft base. Base mounts to the table top. You can see in the one pic where the motor was ... moremounted to the plate. Good used pieces should provide lots of use. Thanks for looking!!!!!!
$
24.00
Buy It Now
Free Shipping
Condition: New
Location: Franklin, United States
$
49.99
Buy It Now
$5.75 Shipping
Condition: Used
Location: Berlin, United States
$
35.00
Buy It Now
$7.50 Shipping
Condition: New other (see details)
Location: Portland, United States
(Inv.39000).
$
9.50
Buy It Now
Free Shipping
Condition: New
Location: Alvord, United States
Belt 3LK 3/8 x 32in OC.
$
15.99
5d 21h 13m 42s
0 bids
$10.83 Shipping
Condition: Used
Location: Ionia, United States
1/4" thick. 1-7/8" Wide.
$
9.99
Buy It Now
$9.35 Shipping
Condition: Used
Location: Nashville, United States
Used South Bend 13 lathe apron oil trough cover in sound, clean condition.
$
50.00
Buy It Now
$16.10 Shipping
Condition: Used
Location: Garwood, United States
Very nice tensioner handle.
$
49.99
Buy It Now
$27.86 Shipping
Condition: Used
Location: Waterford, United States
NO CRACKS OR REPAIRS. THE ITEM IS DIRTY. LOOK AT THE PICTURES.. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. I WILL NOT CHANGE ... moreIT FOR YOU AFTER THE SALE.
$
12500.00
Buy It Now
Condition: Used
Location: Harrison, United States
MODEL: TURN-NADO 22-80 EVS, S/N: 21895120530, YEAR: 1990's. 22"/31" x 80" SOUTH BEND GAP BED ENGINE LATHE. SWING OVER CROSS SLIDE. 14". SWING OVER BED. ... more. 22". SWING IN GAP. . 31".
$
20.00
Buy It Now
$16.10 Shipping
Condition: Used
Location: Garwood, United States
Nice set of half nuts bolts and washers.
$
500.00
Buy It Now
$50.10 Shipping
Condition: Used
Location: Rochester, United States
Southbend Lathe 10"1911vtg Saddle &Crosslide W/gib Excellent Original Condition.
$
39.95
Buy It Now
$8.95 Shipping
Condition: Used
Location: Farmington, United States
1/8" key way. This Item is Used! Gear Has been Cleaned (will be lightly oiled with way lube oil in a plastic bag). You will receive this gear only!
$
131.39
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: Brand new No time wasted with shims All working parts hardened and precision ground Wedge type tool post are precision engineered to assure ... morerepeatability accuracy Wedge type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: .
$
16.99
Buy It Now
Free Shipping
Condition: Used
Location: Madison Heights, United States
This is a 1922 ad for a South Bend Quick Change Gear Lathe and Bench Screw-Cutting Engine Lathe!
$
49.99
Buy It Now
$4.99 Shipping
Condition: Used
Location: United States
Nice Original South Bend Heavy 10 10L Underdrive Countershafy Bearing and Bearing Plates. All as shown.
$
45.00
Buy It Now
$17.95 Shipping
Condition: Used
Location: Garden Grove, United States
The following item is up for SALE - 1 - Clausing Lathe Spindle Handle 1/2" ID 5 1/2" Diameter I do not have RESERVE PRICING on any of my listings and ... morealso offer DISCOUNTED shipping if you would like to make multiple purchases. Thanks for the interest in this item PLEASE visit my store for more available items.
$
99.99
Buy It Now
$14.75 Shipping
Condition: Used
Location: Barnegat, United States
Nice set of shop made ER STYLE collets , would not be hard to make a collet closer for the little jewels , cute homemade collet block , Condition is "Used". ... moreShipped with USPS Priority Mail.
$
28.00
Buy It Now
Free Shipping
Condition: Used
Location: Huntington Beach, United States
Unbranded LATHE HEX CHUCK KEY. Hole is 3/4”
$
250.00
Buy It Now
$16.10 Shipping
Condition: Seller refurbished
Location: Grafton, United States
South Bend 10k Compund. This had yhr thicker base for 10k specifically, not for 9". Has 200 gradution, direct reading large dial. Was ultrasonically stripped/cleaned ... moreand evaporuated. Ready to be paimted to match your lathe!
$
150.00
Buy It Now
$16.10 Shipping
Condition: Used
Location: Ottawa, United States
16, 18, 20, 22, 23, 24, 26, 28, 32 Tooth Gears. 10 DP, Gears Face 5/8".
$
211.50
Buy It Now
$17.95 Shipping
Condition: Used
Location: Garden Grove, United States
The following item is up for SALE - 1 - LOT - South Bend 16 Degree Pitch Lathe Change Gear Set 11 pcs 5/8" bore 1/2" T .
$
16.97
Buy It Now
$4.70 Shipping
Condition: New
Location: Ionia, United States
These wipers cross reference to the original South Bend part number PT59H1. Wipers are sold in sets of 4 and are very reasonably priced compared to OEM ... moreor used parts so don’t miss out on a chance to pick up a set for your lathe.
$
89.99
Buy It Now
$17.70 Shipping
Condition: Used
Location: Nashville, United States
As shown, in good used condition.
$
30.00
Buy It Now
Free Shipping
Condition: Used
Location: Lake Charles, United States
Bull gear guard for a Southbend 9" lathe. Good used condition.
$
45.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Winnetka, United States
I have Thousands of Manuals for Metal Working. Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It ... morewould be a pleasure to get your Machine Up and Running Again through this Invaluable Information. This item will be sent to you refurbished like new. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. I’ve collected Vintage Manuals for a few years. I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Use the information in these manuals for Operations. Operate, Program, Maintenance, Parts Lists, Examinary Training, Motion Picture for Vintage Images, Instructions, Schematics, Wiring Diagrams, Assemblies, Methods and Ideas of Machining. Please View the Following information. Pictures of the Machine Says A Thousand Words. I will search for your specific Needs Continually. I will allow you to return any information that is of No use to you. Machine Obsolescence! South Bend 17” Turn-Nado. Geared Head Lathe Parts List Manual Year(1972) This Manual Covers Models: 17” Turnado This Manual Includes: Parts Lists Functionally Illustrated Drawings showing component Identification This Manual Has 54 Printed Pages. Year September 1972 Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE All Manuals come Spiral Bound. Transparent Plastic Front and Back Cover.Most Products are Shipped the next day. After Much Consideration. ALL INTERNATIONAL SALES Will Be a Computer Generated.pdf E-Mail. Normal 0 false false false EN-US JA X-NONE
$
29.99
Buy It Now
$8.99 Shipping
Condition: Used
Location: Uhrichsville, United States
The bore is a 1/2" (approx.503") and the bearing area is good. The oil hole is clear. The mounting centers for the holder are 1-1/8" on center.
$
15.00
Buy It Now
$4.70 Shipping
Condition: Used
Location: Tucson, United States
South Bend Lathe 9A/9B Apron Selector.
$
55.00
Buy It Now
$18.75 Shipping
Condition: New
Location: Caledonia, United States
$
200.00
Buy It Now
$10.00 Shipping
Condition: New – Open box
Location: Rochester, United States
Southbend Lathe 9"10K Change Gears 5pc Lot 18dp .563id. 375wd ....
$
49.99
Buy It Now
$5.75 Shipping
Condition: Used
Location: Berlin, United States
$
24.99
Buy It Now
$5.00 Shipping
Condition: Used
Location: Pomona, United States
All parts are new. Never used. Some light surface rust from time, very light. Winner gets everything in the first pic. Have one of the original boxes. ... moreTotal length is 129mm, stem is 9mm wide and 22mm tall. USA made. Great deal, I have no lathe, so they're for sale!
$
16.00
Buy It Now
$16.10 Shipping
Condition: Used
Location: Sherwood, United States
Southbend lathe 9" Model 420 Toolmaker Banjo bracket Excellent condition.
$
125.23
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: Brand new No time wasted with shims All working parts hardened and precision ground Wedge type tool post are precision engineered to assure ... morerepeatability accuracy Wedge type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: .
$
7.99
Buy It Now
Free Shipping
Condition: New
Location: McMinnville, United States
First Year Lathe Work - Introduction, by J.J. O'Brien, South Bend Lathe Words Publication, 1917, 63 pages. The titles included are as follows Machine ... moreForging, Foundry Appliances, Iron Forging, Hardening & Tempering, ICS, 1906, 679 pages.
 In 

Former Listings  
 
6'' FACE/DOG PLATE 1-1/2 X 8TPI FOR ATLAS CRAFTSMAN SOUTH BEND 9 10 12'' LATHE
UP FOR SALE IS AN ORIGINAL 6' DIA. DOG/FACE PLATE WITH 1-1/2 X 8T.P.I. THREAD MADE BY ATLAS. IT WILL FIT ATLAS CRAFTSMAN 10 12' LATHES. SOUTH BEND 9 10' AND OTHERS. IT IS IN EXCELLENT CONDITION. PART NO.9-15 YOU WILL GET THE PART JUST LIKE YOU SEE IT IN THE PICTURE. SEE MY OTHER AUCTIONS FOR MORE LATHE PARTS AND OTHER INTERESTING ITEMS. PAYMENT: Is expected within 7 days. I'm PayPal Verified) IF YOU HAVE A PAYPAL CONFIRMED SHIPPING ADDRESS THAT THE CARRIER WILL DELIVER TO; otherwise please pay a different way. I accept cashier's check. Or credit card by phone to my merchant account.MC, VISA,AMEX,DISCOVER) Remember to give your shipping address and phone# FOR INTERNATIONAL BUYERS PAYPAL ACCOUNT REQUIRED. BUYER TO PAY CUSTOM FEES IF ANY REQUIRED. SHIPPING: For this item will be $5.60 USPS PRIORITY Mail with Delivery Confirmation. ... moreInsurance(if desired) will be an additional $1.75 I ship most items the next weekday after receiving payment. i will combine shipping to save you money if you buy more items within a week- as long as they go together in the same box. QUESTIONS: HOME PHONE/FAX: 954) 428-6575 CELL PHONE: 954)415-9744 PLEASE CALL any day from 8 a.m to 10 p.m. Eastern time. THANK YOU FOR LOOKING AT MY AUCTIONS. Click Here. Double your traffic. Try Vendio Gallery Risk FREE!
Metal Lathe Milling Attachment Missing The Vise Atlas South Bend Logan Craftsman
Metal Lathe Milling Attachment Missing The Vise Atlas South Bend Logan Craftsman. I tried a 10" Atlas compound on the taper and it fits right on so I think it would need a Atlas Vise or you can rig up your own. I have a Logan 10" 1821. South Bend 9A and 9C and a 10" Atlas metal lathe that I will be listing parts from this month so if you need anything from one of these lathe message me through ebay and I will list the parts you need if I still have them. This will be shipped within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but please wait for me to invoice you before you pay since ebay charges 10% on shipping fees and I will be on the phone for hours with them getting them to combine the shipping for me which they ... moredont like to do since they lose money.
Headstock Clamping Studs for South Bend 13 Lathe
Headstock Clamping Studs for South Bend 13" Lathes. Good condition: The flats on one of the studs are a little chewed up(see pics) but otherwise fine. Includes Nuts and washers.
South Bend Lathe 13" Follower Rest EXC
South Bend 13" Lathe Follower Rest Mounting holes measure 2-1/4" OC and center to mounting hole height is approx 6-1/8" in. casting is marked 130T1 This is in excellent uncleaned. Undoctored condition- Good serviceable tool I will combine shipping on multiple purchase- and will invoice at end of auction.
South Bend Lathe 13" Steady Rest EXC
South Bend 13" Lathe Steady Rest casting is marked 125 1 and castings are stamped sp center height measures 6-1/2" from flat This is in excellent uncleaned. Undoctored condition- Good serviceable tool I will combine shipping on multiple purchase- and will invoice at end of auction.
South Bend Lathe Rotary Milling Table 4-1/2" dia Excellent Machinist
Southbend 4-1/2" Rotary table for milling No marks in the surface- gear train runs smoothly This is excellent uncleaned. Undoctored condition- Good serviceable tool. it is missing its little plastic ball end on the locking lever- I will combine shipping on multiple purchase- and will invoice at end of auction.
Jacobs & Cushman Atlas South bend machinist lathe drill chuck tool set Nice
Jacobs& Cushman drill chuck set. Great shape! Both have 0-3/8" capacity. Jacobs USA is MT2 shank. Cushman is 1/2" straight shank Japan. As is. NO returns. I will try and list any flaws. ANY Questions. Please ask. More pics! insurance. Tracking, Anything, Please ask. Ships USPS. USA only! 4 days to pay or I relist. I am selling thousands of American tools& items. Thank you for looking and Good luck!
Authentic South Bend Lathe 5C Collets Collet
9/16. 11/16, 3/4, 7/8, 13/16 They do not have internal threads Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
SET OF VISE CLAMPS TOOL LOT 4 MACHINIST SOUTH BEND ATLAS CRAFTSMAN LATHE
Very Nice- Set of two(2) vise clamps. Interior dimension between screw threads is 5/8" and 15/16" In fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
MACHINIST BORING BARS 3/4" 1/2" 3/8" LATHE FITS ATLAS CRAFTS SOUTH BEND LOGAN
Set of THREE Lathe Boring bars. Diam 3/4" bit cap 1/4" Diam 1/2" bit cap 3/16"comes with 5/8"removable bushing) Diam 3/8" bit cap 1/8" Check out my!
MT2 BULL NOSE DEAD CENTER 4 MACHINIST SOUTH BEND ATLAS CRAFTSMAN LATHE
Excellent Condition MT2 bull nose dead center. MT2 shank is 2 7/8" long. Body of center is 1 1/2" diameter. In excellent condition. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE MT2 CROTCH CENTER TOOL 4 MACHINIST SOUTH BEND 9 10K LATHE
Nice- MT2 crotch center. I believe this is an original South Bend unit. Face diameter is 2" MT2 shank is 3" long. Small drill mark noted in center area, as shown in photo. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE!! SOUTH BEND 10" x 28" PRECISION TOOL ROOM LATHE - #CL8187AB
aims NICE! SOUTH BEND 10" x 28" PRECISION TOOL ROOM LATHE- CL8187AB read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by South Bend Lathe. Inc. This is a Precision Toolroom Lathe in GREAT condition. Model# CL8187AB Serial# 12550RKL16 Features: Logan 6" Four-Jaw Chuck. 5C Collet Nose Piece& Draw Bar. 6" Dog Plate. 7-1/2" Mounting Plate. 8" Face Plate. Jacobs Drill Chuck: 0" 1/2" Single Phase. Specifications: Swing: Swing Over Bed: 10" Swing Over Cross Slide: 5-1/2" Swing Over Compound Slide: 2-1/4" Capacities: Distance From Floor to Center: 46-1/2" Distance Between Centers: 28" Spindle: Threaded Mount: 2-1/4"8 tpi Spindle Bore: 1-3/8" Threads: Inch: 4 to 480 tpi. Carriage: Cross Slide Travel: ... more4-1/2" Compound Rest Travel: 1-3/4" Tailstock: Spindle Travel: 2" Taper of Center: 2 Morse Taper Spindle Diameter: 1-1/16" Bed: Width of Bed Face: 7-1/8" Length of Bed: 48" General: Motor: 1 Horsepower. 115/230 Volt, 1,725 rpm, 14.8/7.4 Amp, 60 Hz, Single Phase Electrical: 115/230 Volt. Single Phase Overall Dimensions: 66" x 26" x 56" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! SOUTH BEND 10" x 28" PRECISION TOOL ROOM LATHE- CL8187AB NICE! SOUTH BEND 10" x 28" PRECISION TOOL ROOM LATHE- CL8187AB NICE! SOUTH BEND 10" x 28" PRECISION TOOL ROOM LATHE- CL8187AB NICE! SOUTH BEND 10" x 28" PRECISION TOOL ROOM LATHE- CL8187AB NICE! SOUTH BEND 10" x 28" PRECISION TOOL ROOM LATHE- CL8187AB NICE! SOUTH BEND 10" x 28" PRECISION TOOL ROOM LATHE- CL8187AB NICE! SOUTH BEND 10&q
ATLAS SOUTH BEND LOGAN METAL LATHE TOOL POST WRENCH 16
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ 3 5/8" long 3/8" came with atlas 10 lathe tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. ... moreAs always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax- Please contact me through ebay message system. Thank you!
VINTAGE LATHE BORING TOOLHOLDER - SOUTH BEND
Up for sale is a" VINTAGE LATHE BORING TOOLHOLDER- SOUTH BEND" in as found but excellent working condition. Has name stamped on it with no makers mark, company closure, clean useful used tool!as shown in pictures) NOTE: once the item is paid/ shipped, all of the LABEL/ TRACKING information will always be under PURCHASES in your my eBay with the item you purchased also eBay will send a message to your email address stating your item is shipped. Please take a minute to look at our other items! NO INTERNATIONAL SHIPMENTS! NO PICKUPS OR DELIVERIES! We also sell used tools, some may need recalibrating, some may or may not have etchings, repainting on them from the previous owners, if something isn't in our description or pictured, you can assume it is not included! Method of payments: PAYPAL. Massachusetts residents pay 6.250% sales ... moretax. Good Luck& Happy Buying! Powered by The free listing tool. List your items fast and easy and manage your active items.
South Bend Lathe Boring Bar holder and Insert Boring bar
Boring Bar holder for a Southbend Style Lathe. Manufacturer's tag missing.
Machinist Made Boring Bar Holder for South Bend Atlas Logan Lathe Gunsmith NR
It's in rough shape. But it'll do it's job! Lot's of"Character" Shank is approximately 0.58" wide and 1" tall. Shipping: Generally. The shipping price that is quoted is the cheapest method I could find when I listed the item. If you think I messed up, by all means, ask! I will try to offer discounts on multiple purchases for shipping if it will save you a significant amount of money. Payment: Please try to pay within 48 hours of auction close unless prior arrangements have been made. I try to let pictures speak for the item. If you have any questions about the item. Or shipping or payment, please do not hesitate to contact me through Ebay. Check out for more great items! I combine on shipping! Powered by
South bend heavy 9" lathe apron hand wheel gear m20
I believe this is a South bend heavy 9 lathe apron hand wheel gear. In great shape as shown. Part number M20. Contact with questions. Keywords: lathe. Logan, atlas, south bend, machinist, machine shop, milling machine
South Bend Heavy 10 Lathe Main Head Stock Casting
South Bend Heavy 10 Lathe Main Head Stock Casting South Bend Heavy 10" Lathe Main Head Stock Casting For Later Bearing Insert Models No Cracks Breaks or Repairs Add me to your Favorite Sellers" WE ACCEPT PAYPAL ONLY" All items must be paid for within 3 days of Auction End We strive to ship all orders within 3 business days after payment has been received. We carefully package all items in order that they will arrive safely as we know how frustrating and disappointing damaged items can be. If your item arrives damaged. The original packaging must be kept until the claim is resolved. We do not make a profit on shipping charges, all shipping charges are actual cost charged by the shipping carrier. Any additional Shipping& Handling charges are included to cover the cost of shipping and packing materials and insurance. International ... moreBuyers? Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up? do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Unless otherwise noted. We do not sell new items. Therefore, due to the vintage nature of most items, all items are sold as is. We attempt to accurately describe and photograph everything as well as possible. Your satisfaction is important to us and we strive to take all precautions to assure this satisfaction. We want your experience with us to be a pleasant and continuing one! If you have any questions regarding any item or shipping. Please contact us through the Ask seller a question section at the top of the page
Triple Bearing Live Center for Lathe, South Bend, Monarch, Clausing
Excellent Triple Bearing Import Live Center for Lathe MT4 Shank. 1/2" x 13 TPI draw threads, good point, smooth bearings. No international shipping. I try to describe as accurately as possible. Ask questions prior to bidding. Happy to combine shipping when possible.
South Bend lathe Steady Rest Bed Clamp ?
Steady Rest Bed Clamp South Bend? 5/8 tapped hole
9" SOUTH BEND LATHE LEADSCREW BEARINGS, BRACKET
Bearings off a 9" South Bend lathe. Model C. Excellent condition. See picture. Item is sold as is. If you have any questions please ask before bidding. I only ship within the US. Good Luck! Payment must be received within 3 days after the auction ends. Item is used and is sold as is. No returns or refunds. Don't forget to check out my other listings. Powered by The free listing tool. List your items fast and easy and manage your active items.
REPUBLIC LAGUN FTV-2 ANILAM 3 AXIS MILLING MACHINE WITH TOOLING SOUTH BEND LATHE
REPUBLIC LAGUN FTV-2. 10X50 TABLE, VARIABLE SPEED, HARDENED WAYS, 3 AXIS ANILAM 1100 CONTROL, 3 PH POWER, SELF OILING, COOLANT PUMP, COMES WITH SOME TOOLING AND A MANUAL, PLEASE SEE PHOTOS, EXCELLENT CONDITION, RUNS GREAT, READY TO MAKE YOU $$$, COME CHECK IT OUT, LOCAL PICK-UP ONLY, CALL MR SMITH WITH QUESTIONS AND OR OTHER DELIVERY/SHIPPING OPTIONS 224-400-597FIVE
LOT OF 3 KEYWAY CUTTERS FOR ATLAS CRAFTSMAN SOUTH BEND METAL LATHE
Lot of 3 Keyway Cutters for an Atlas. Craftsman or South Bend Metal Lathe. Units Measure- Arbor 1/2" diameter with a 7/16" diameter blade, 5/16" diameter arbor with a 9/16" diameter blade and 1/2" arbor diameter with a 7/16" diameter blade. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1436fb3f261-0xfe-
1944 SOUTH BEND LATHE WORKS, "HOW TO RUN A LATHE", volume 1 edition 43
Old but in good shape. No missing pages. Ship to lower 48 states only.
1940 SOUTH BEND LATHE WORKS, "HOW TO RUN A LATHE", SOFT COVER BOOK, 41st EDITION
CLASSIC MANUAL BY SOUTH BEND LATHE WORKS- 41st EDITION(COPYRIGHT 1941) ON"HOW TO RUN A LATHE. THIS MANUAL HAS TEXT. MANY ILLUSTRATIONS AND BLACK AND WHITE PHOTOS. THE COVER SHOWS A COUPLE OF WEAR SPOTS BUT THE BOOK IS SOLID WITH NO MARKS OR GREASE ON ANY OF THE PAGES. THIS HAS A TOTAL OF 128 PAGES AND MEASURES 5" x 8" Very Good Plus Condition: Solid spine. Complete, No loose or missing pages. No tears or smudges. No yellowing or browning of pages. Winner pays P&H. If you are not satisfied for any reason. Allow us the opportunity to clear up the problem before leaving negative or even neutral feedback. We believe in working with AND satisfying our customers.Thank You! Powered by The free listing tool. List your items fast and easy and manage your active items.
4 machinist books lathe mill south bend
Have 4 nice book's for you to consider- one is old. A 1941 machine shop operation's manual in real nice shape, very readable throughout- a 20th edition 1978 machinery's handbook great shape also- a south bend lathe, how to run a lathe 1966 used but very readable- and a reprint of a 1937 milling machine operation's book- have had these for a while and do not need them anymore, you can get some very nice books all at the same time here, low starting bid on these- thank's for looking- priority shipping-WILL ONLY SHIP LOWER 48 STATES ONLY-
Skinner Chuck 4006-46 6" 4 Jaw South Bend Logan Atlas Craftsman Lathe 1.5 x 8tpi
Offered is a Skinner Lathe Chuck. Chuck is in overall excellent used condition. 6" 4-Jaw Chuck with Reversible Jaws. Key included. 1.50" x 8 tpi. Chuck is Stamped South Bend Lathe Works. Was previously used on a Logan 10" Should also work with Atlas, Craftsman, and any other that utilizes the 1.50" x 8 tpi thread pattern.
Metal Lathe Cross Feed Screw,south Bend Lathe,logan Lathe
Cross feed screw with large dial. Nice unit and seems to have very little play in the screw and nut. Measured with a tape measure and getting 10tpi Posted with
Armstrong 00B Boring Bar Holder from a 9" South Bend Lathe
Armstrong 00B Boring Bar Holder from a 9" South Bend Lathe
ORIGINAL SOUTH BEND 9" METAL LATHE HEADSTOCK SIDE GEAR GUARD COVER 146N2
HERE'S A ORIGINAL SOUTH BEND 9" METAL LATHE HEADSTOCK ALUMINUM SIDE GEAR GUARD COVER PART 146N2. THE MOUNTING STUD HAD BEEN REMOVED AND THIS WAS HELD ON BY A NUT AND BOLT. SOLID SHAPE OTHER THAN THE STUD BEING GONE. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
12 SOUTH BEND ,LOGAN , MAYBE ATLAS LATHE THREADING CHANGE GEARS 5/8 BORE KEYED
Up for sale is 12 mixed size threading change gears all are the same pitch and have 5/8 holesmost are keyed. I do not know what lathe these came from as they were from a estate cleanup. they are all useable but need to be cleaned. any questions please ask
South Bend lathe 9" motor support
South Bend 9" motor support in very good condition but need bushing. I'm selling this one cheap because i know shipping will be heavy. Come from a running lathe and ready to install.Weigh over 20 pounds. Shipping is for lower 48 states and Canada. You may have to pay a little more or less for shipping. I will refund every shipping excess.
South Bend Lathe 5C Collet Adapter For Heavy 10, 13, 14 1/2. 16 inch Lathes
South Bend Lathe 5C Collet Adapter For Heavy 10. 13, 14 1/2. 16 inch Lathes Nice 5c collet adapter for South Bend lathes Fits South Bend Lathes with 1 3/8" spindle bore. The internal key is present I bought a South Bend Heavy 10" for myself and it came with multiples of the same exact items. I have several of these and only need one. The outside of the sleeve is tapered from 1 1/2- 1 5/8" It accepts a 5C collet which is 1 1/4" wide. NO RESERVE Thanks for looking
Metal Lathe Wrench Set LOT Square Hex 8 point LeBlond Atlas Hardinge South Bend
If you can’t find a wrench that fits your lathe in this bunch. Wow you have a BIG lathe! I am not a machinist but if you ask me questions. I will try to answer as best I can. Let my lack of knowledge. Be your deal! I obtained these from an industrial arts center that was cleaning out. Checkout my other auctions—who knows maybe you’ll make out like a bandit! Here's my"nobody gets burned" return policy: You'll be happy with it. I'm certain. In fact, if you're not happy with it for some godforsaken unforeseen reason(and I can't imagine what that might be) I'll take it back and refund your bid amount, less my listing and value fees, provided it doesn't look like you drove a truck over it, and provided you pay the postage to return them to me within 10 days from the date I mailed the package. PayPal for immediate ... moreshipping. anywhere at a lower-48 U.S. address for $8.80. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14387d4e2bd-0x104-
Spin Indexer With Crossfeed,bridgeport Milling Machine,south Bend Lathe
Spin indexer with cross feed. Cross feed is shop made but well made. As always the shipping I quoted is to cover the longest distance from me(nh)I will only charge actual shipping to your zip Posted with
South Bend 9" Lathe Leadscrew w/Gear 38 1/2" Long
This auction is South Bend 9" Lathe Leadscrew w/Gear 38 1/2" Long in good condition.It was removed from a running South Bend 9" with quick change gearbox. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
South Bend Lathe 5 to 1 compound gear
These gears are 20 pitch and have 100 teeth on the large gear and 20 teeth on the small gear. The large gear looks good. However the small gear has some chips in the teeth but it will probably work fine.The photos show the small gear from three sides. It looks like the small gear is pressed into the large gear so it may be replaceable. The bore is 5/8 and the face is 3/8 and I am including the bushing that fits the gear to a 7/16 bolt. The outside diameter of the large gear is 5.10 inches. Check your lathe to make sure it uses 20 pitch not 18 pitch gears! Free Shipping by Priority Mail. Sold as is, No returns.
South Bend 9 Inch Lathe Lead Screw Support Bracket
This is the shorter one where the change gears and banjo are closer to the end of the bed. It looks to be in good shape. Free Shipping by Priority Mail, Sold as is, no returns.
SOUTH BEND LATHE WORKS TOOL CHECK, VINTAGE, COLLECTIBLE, MACHINIST TOOLS
Normal 0 VINTAGE SOUTH BEND LATHE WORKS TOOL CHECK FROM THE ESTATE OF A SOUTH BEND LATHE TOOLMAKER. MADE OF BRASS. AND WAS ISSUED IN THE 1940’s Normal 0 PLEASE READ THE DESCRIPTION CAREFULLY. IF YOU HAVE QUESTIONS. PLEASE ASK BEFORE BIDDING. YOU WILL RECEIVE EXACTLY THE SAME ITEM THAT YOU SEE IN THE PICTURE. THE TOOLS I SELL ARE FROM ESTATES AND TOOL SHOPS THAT HAVE CLOSED. I DO NOT CALIBRATE OR GUARANTEE ACCURACY OF ANY TOOLS. NO INTERNATIONAL SHIPPING AND NO THIRD PARTY BIDDERS. I ACCEPT PAYMENT THRU PayPal ONLY. THANK YOU! Confirmation Number is Included with every Shipment.
ADJ BORING TOOL BLOCK METAL LATHE MACHINIST SOUTH BEND LOGAN ATLAS CRAFTSMAN
ADJUSTABLE BORING TOOL BLOCK 2" DIAMETER ACCEPTS 5/16" UP TO 13/16" BORING BARS 2" X 1" X 19/64" NUT BORING BAR 3/4" DIAMETER X 11" LONG UP TO 1/4" TOOL BITS The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
South Bend,Skinner, lathe chuck 6", 4 jaw, 4006-53, machinist tools,lathe
South Bend. Skinner,6" 4 jaw Chuck Real nice condition 2.25" x 8 tpi No. 4006-53
SFJ No K3A Clausing South bend lathe MT3 live center tool removable tip Nice
SFJ No K3A live center lathe tool. Made in Switzerland with an MT3 taper. Good shape! As is. NO returns. I will try and list any flaws. ANY Questions. Please ask. More pics! insurance. Tracking, Anything, Please ask. Ships USPS. USA only! 4 days to pay or I relist. I am selling thousands of American tools& items. Thank you for looking and Good luck!
5-1/2" CLAUSING, SOUTH BEND similar lathe BACK PLATE D1-3
Here is a 5-1/2" BACK PLATE for a CLAUSING. SOUTH BEND or similar lathe. Part is for the D1-3 spindle. Part removed from a 6" BUCK 3-jaw chuck. Plate is 1" thick. Shipping flat-rate to the lower 48 is $7 all others must contact seller for actual cost.
South Bend 10L-14-1/2-16 lathe DRAW BAR HOLDER for COLLET RACK
Here is a DRAW BAR HOLDER for a SOUTH BEND LATHE collet rack. Part is marked 10L 14-1/2 16 with PN 781. Part is clean with only minor handling marks. It has a.870 shaft dia. with a 2" eye. This was removed from a school lathe in the 70's. In storage since. Shipping flat-rate to the lower 48 is $7 all others must contact seller for actual cost.
5-1/2"South Bend 10R or 13" lathe DOG PLATE 1-7/8"X8tpi
Here is a 5-1/2" DOG PLATE for a SOUTH BEND 10R or 13" lathe. Part is for the 1-7/8" X 8 spindle. Part is in good condition with most paint remaining and only a few dog marks and one small chip on the edge of the dog slot. Shipping flat-rate to the lower 48 is $7 all others must contact seller for actual cost.
South Bend Lathe 10K Horizontal Belt Guard
South Bend Lathe 10K Fiberglass Horizontal Belt Guard.This part is in great shape. Like new.
South Bend Lathe 10K Horizontal Guard for the Drive Unit
South Bend Lathe 10K Cast Horizontal Guard for the Drive Unit. This part is in great shape. Like new.
EXCELLENT ORIGINAL SOUTH BEND LATHE SKINNER 6" 4 JAW REVERSING CHUCK 1 1/2" x 8
Excellent Condition- Original South Bend Skinner 6" 4 jaw chuck with reversing jaws and key. Chuck is stamped"NO. 4006B SOUTH BEND LATHE INC A SKINNER CHUCK" Back plate is stamped with the South Bend logo and 1 1/2- 8. Chuck is 1 7/8" thick. Thread mounting diameter is 1 1/2" diameter 8 threads per inch. Key is included as shown. Jaws move smoothly throughout range. Chuck has not seen much use. In excellent condition. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
SOUTH BEND 10K LATHE HEADSTOCK SPINDLE SLEEVE BEARINGS
SOUTH BEND 10K LATHE HEADSTOCK SPINDLE SLEEVE BEARINGS. EXELLENT CONDITION. CAME OFF A LIGHTLY USED LATHE.
milling machine Handle,atlas Mill,south Bend Lathe,metal Lathe
4" machine handle with 1/2" center hole. Great condition and most likely never used. Posted with
Nice South Bend 10K Lathe 10x36" IN/MM & Taper Attachment 1 Phase
Nice late model South Bend 10k lathe with the long bed and single phase 110/220. Machine comes with taper attachment. Metric change gears, South Bend 5" 3 jaw chuck with ID and OD jaws, Buck Adjust-tru 5" 3 jaw with standard jaws only, Buck 4 jaw independent chuck, 6k collet closer, spindle nut and wrench, and a large lot of 6k collets, 2) Jacobs Super ball bearing tailstock chucks, faceplate, chuck keys, micrometer carriage stop, and turret carriage stop. Machine has hardened ways. Ways are excellent. The spindle drive belt is off and probably needs to be replaced. I can get shipping rates and I can load. Crating if required is $150 which is about what it costs me for materials alone. No paypal on this one as I will not cover the $120 cost of taking paypal. Inspection under power in my Aberdeen, NJ shop is welcome call 917-974-7381. ... moreNJ and NY residents must add sales tax or provide a valid exemption. PLEASE CHECK MY OTHER ITEMS.
Vintage HOW TO RUN A LATHE South Bend Lathe Works 41st Edition Manual Book GC
This is a Vintage HOW TO RUN A LATHE South Bend Lathe Works 41st Edition Manual Book GC. Overall in good. Used condition, this does have some writing on the cover and in a few places inside the book. Is complete and readable. Please see pictures for details and message me with any questions. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-143a4c4fbe1-0xfb-
STOP, South Bend, Logan, Clausing 13,14,15,16 inch lathe ~~• } ((((º ~•
It's in good condition. Just return it in a few days if you don't like it. I guarantee your satisfaction. Insurance IS included in US shipments. Foreign bidders. Please arrange international shipping before you bid. You can get an estimate at http:ircalc.usps.gov/ I'm happy with Paypal if you get the funds from your bank or Paypal balance and not from a credit card. I'm also selling various supplies and CAE software originally purchased for a prototype machine shop I used to operate in San Francisco. Just ask if you would like me to set up an auction for any of it. Powered by The free listing tool. List your items fast and easy and manage your active items.
Hardinge South Bend Type 6 Position Adjustable Lathe Stop
6 Position Adjustable Lathe Stop Excellent Working Condition Questions? Call Robert at 607-259-5615 52-C
Jacobs 34B Chuck With Holder South Bend 9" Lathe
Jacobs 34B chuck made in Hartford. Conn. This is sitting on an original south bend tooling holder for it from a 9" lathe. It's threaded to go on a morse taper holder for It but that's not included No chuck key included Posted with
1944 South Bend How to Run a Lathe Care Operations Instructions Illustrated Book
Wow! Here is a fantastic old manual. This is a South Bend Lathe Works illustrated manual- How to Run a Lathe: Volume 1- edition 50- The Care and Operation of A Screw-Cutting Lathe. Overall condition is Good- Moderate signs of age and use. Inside pages are lightly tanned. See photos. Normal 0 false false false MicrosoftInternetExplorer4 Please check out our ebay and if you like what you see be sure to add us to your! So you check in often! If you’re on Facebook please visit us through our Social Store at Mandaleehee’s Online Shop. We here at Mandaleehee’s Online Shop believe that providing great customer service is THE most important thing. We provide a 14 day money back guarantee and a 1 day handling time. Buyer always pays return Shipping. We also provide fast and free shipping to all 50 US States with delivery confirmation- included. International ... moreshipping will be calculated by weight. Buyer pays shipping. One of our goals is to help the environment by recycling. All items will be shipped using recycled supplies. We are a Small 2 person Team- We are not expert’s just real people giving our real opinion with over 10 years of eBay experience. Bid and buy with confidence… feel free to ask any all questions first.
dial indicators,starrett,ames,south Bend Lathe
Starrett last word indicator.Ames dial indicator with bracket and indicator stand Posted with
SOUTH BEND LATHE INSTRUCTION BOOK HOW TO RUN A LATHE 1954 GOOD CONDITION
This auction is for a vintage softcover book it is in very good near mint condition no dog ears. No torn pages, no odors or water damage, The binding is good. 127 page book with complete instructions on how to operate your Southbend Lathe has history of the lathe and many B&W photos inside very clean good condition. Happy New year. I always use USPS shipping This item will ship in a cardboard envelope to prevent damage to the book and will ship VIA First Class Mail. Thank You.
South Bend Lathe CE-3455 Parts Manual 9" Model
South Bend Lathe CE-3455 Parts Manual 9" Model 12/1995 If you have any questions. Please let me know. Thanks for looking.
ATLAS CRAFTSMAN LATHE JACOBS 18N SUPER CHUCK+KEY #2 MT SOUTH BEND LOGAN GD USED
ATLAS CRAFTSMAN LATHE JACOBS 18N SUPER CHUCK+KEY#2 MT SOUTH BEND LOGAN GD USED Click to Enlarge Click to Enlarge Click to Enlarge SMOOTH WORKING JACOBS#18N SUPER BALL BEARING CHUCK WITH KEY. 2 MORSE TAPER SHANK FITS ATLAS CRAFTSMAN. LOGAN AND MANY SOUTH BEND LATHES. 1/8-5/8 CAPACITY. THANKS, AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. Analyzing"Smart Counters" only at inkFrog inkFrog Analytics.
SOUTH BEND FPS 101R SOUTHBEND 4 PositionTURRET STOP HEAVY 10' LATHE
LIKE NEW SOUTHBEND LATHE 4 POSITION TURRET STOP. MODEL FPS 101R. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-143b068048a-0xf8-
South Bend 9" Model A Lathe Step Chuck Collet Closer 3c Step Collets 1-1/2"-8
1-1/2"8 threaded step chuck collet closer. The 2 spanner holes in it are a bit stretched out as shown. No spanner included. Also includes two 3c step chuck collets. One is aprox 3-1/2" and one is aprox 4-1/2" Both have been machined as seen and have some corrosion as shown. From a South Bend 9" model A. Will also fit 9" B and C All parts are as removed and not cleaned. Will need a good cleaning. See photos for details Ship weight 7-8 pounds
South Bend 9" Model A Lathe Side Gear Cover / Door
Side gear cover door. This one is heavier than most i have run across. Different material. It also has a different hinge arrangement. Most have a pin at the hinge, this one just has a large hole as shown. See photos. From a South Bend 9" model A. Will also fit 9" B and C All parts are as removed and not cleaned. Will need a good cleaning. See photos for details Ship weight 11 pounds
South Bend 9" Model A Lathe Set of 9 3C collets Hardinge RSB Collet
9 pc 3c collet set. Includes: Hardinge 1/4. 1/2, 9/16" RSB(Southbend red arrow brand) 5/16. 1/16, 1/8, 7/16" hard to read some of them) Cant read: 3/16 and 3/8" I assume these ones are also RSB but markings wore off. All came from the same lathe. Many will need a good cleaning and polishing as shown. dirt/light corrosion from sitting-see large photos) From a South Bend 9" model A. Will also fit 9" B and C All parts are as removed and not cleaned. Will need a good cleaning. See photos for details Ship weight 1-2 pounds
South Bend 9" Model A Lathe Rear Drive Counter Shaft
Rear drive counter shaft. See photos for details. From a South Bend 9" model A. Also fits model B and C All parts are as removed and not cleaned. Will need a good cleaning. See photos for details Ship weight 26 pounds
south bend metal lathe 9" carriage unit
nice south bend 9" carriage unit. nice condition has only been cleaned enough to handle. Waiting for your restoration project
south bend metal lathe 9 or 10k apron mount screws
nice south bend 9 or 10k apron mount screws. nice condition has only been cleaned enough to handle. Waiting for your restoration project
south bend metal lathe 9 or 10k saddle lock and screw
nice south bend 9 or 10k reverse gear lever. nice condition has only been cleaned enough to handle. Waiting for your restoration project
MACHINE SHOP SOUTH BEND LATHE LUBRICATION INSTRUCTIONS & FOLDOUT PHOTO 1965
LUBRICATION CHART AS SHOWN IN A LARGE FOLDOUT PHOTO. ALSO, LEVELING INSTRUCTION FOOR MANY TYPES, BELT CARE ETC.
MACHINE SHOP SOUTH BEND LATHE WESTINGHOUSE MOTOR INSTRUCTIONS & TAG 1960S
AS SHOWN. PROBABLY FOR A SOUTH BEND OR LEBLOND. TAG MENTIONS TAILSTOCK SPINDLE, SO IT MUST BE THE INFO FOR A LATHE MOTOR. TAG STATES-TAG COLOR CODE.
MACHINE SHOP SOUTH BEND LATHE PACKING DELIVERY DAMAGE NOTICE 1960S
AS SHOWN.
MACHINE SHOP SOUTH BEND LATHE WIRING HINTS 1963
2 SIDES.
Rack Pinion Gear for South Bend 13 Lathe
Rack Pinion Gear South Bend 13" Lathes. Good Condition. A little dinged around the hole for the tapered pin on outer edges. Otherwise fine.
Nice! Bergman's 4 Jaw 10" Lathe Chuck Warner swasey No.3 South Bend
Swiss made not a cheap import. Like new Bergmans 10" 4 jaw chuck. This chuck was bought new and mounted to a Warner Swasey No.3 and used on 1 job for about 4 days and has been sitting on the lathe unused for about 10 years. Its a little greasy but near new condition. Shipping will be $29.00 in the lower 48 states.
Lathe Chuck Stop Spacer Cushman South Bend Hendey Atals Logan Parallel Shoptask
Lathe Chuck Stop Spacer Cushman South Bend Hendey Atals Logan Parallel Shoptask This is a used metal lathe chuck stop. These are used to space parts and stock out from the chuck face itself so you can work on a short piece chucked into the lathe. Also used to repeatedly cut same length parts in the lathe. I used this on a 5" Cushman chuck at the time on a South Bend metal lathe. I no longer have the chuck and therefore it does not fit my new chuck. So I had to make a new one and this one must go. Once you get one of these you will wonder why you didn't get one sooner! Aluminum construction 4" Outside Diameter Allows you to chuck up a minimum 1.50" diameter stock or part Will fit chucks with jaws up to.528" wide This spacer is.504" thick Fits a Cushman 5" 3 jaw chuck and many others
South Bend 9" Workshop Lathe Apron Assembly
9" workshop lathe apron in good working order. Has good handles. Good gears, and excellent half nuts. Comes as shown. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-143bb5eca2a-0x102-
ORIGINAL "workshop" early SOUTH BEND 9" LATHE Headstock Casting #57811
ORIGINAL"workshop" early SOUTH BEND 9" LATHE Headstock Casting#57811 CLICK ON THE PICTURES FOR CLOSE PICTURES.THE PICTURES USUALLY TELL THE CONDITION BETTER THAN I CAN DESCRIBE IT. it is good condition.when i took it apart everything was working and was tight. Has some normal minor wear.you get what you see.this is from an older model,workshop" style lathe. I WILL COMBINE SHIPPING WHERE POSSIBLE PUERTO RICO. ALASKA AND HAWAII SHIPPING MAY BE HIGHER ON SOME ITEMS IF THEY ARE LARGER PLEASE EMAIL FOR PRICE INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING BUYERS ARE RESPONSIBLE FOR TAXES AND DUTY FOR THERE COUNTRY. SOMETIMES ITEMS ARE HELD UP IN CUSTOMS AND CAN TAKE A LITTLE LONGER AT TIMES TO RECEIVE YOUR PACKAGE. INTERNATIONAL BUYERS PLEASE DON'T ASK ME TO LIE ON THE CUSTOMS FORM.I WILL ONLY PUT ACTUAL SALE PRICE AND ACTUAL ... moreCONTENTS ON IT. NO EXCEPTIONS. INTERNATIONAL BUYERS ARE ALSO RESPONSIBLE FOR KNOWING IF YOU NEED AN IMPORT LICENSE FOR THE ITEM YOU ARE BUYING OR IF IT IS PROHIBITED TO YOUR COUNTRY. ANY REFUNDS GIVEN WILL BE MINUS SHIPPING COSTS.THE ONLY REASON ACCEPTED FOR RETURN IS IF A MISTAKE WAS MADE IN THE DESCRIPTION. IF YOU HAVE A PROBLEM WITH YOUR PURCHASE. PLEASE LET ME KNOW BEFORE YOU LEAVE A NEGATIVE.IT IS BEST TO SEND A NICE EMAIL AND NOT A NASTY ONE.NICE EMAILS GET BETTER ACTION.
"workshop" early SOUTH BEND 9" LATHE #57811 -saddle w/ gib & wiper retainers
workshop" early SOUTH BEND 9" LATHE#57811-saddle w/ gib& wiper retainers CLICK ON THE PICTURES FOR CLOSE PICTURES.THE PICTURES USUALLY TELL THE CONDITION BETTER THAN I CAN DESCRIBE IT. you get all of the parts you see.the wipers and retainers are there but the felts may need replaced.Some are missing,probably east to cut some new felts from the craft store.has the cross feed screw still intact and the large gib.no retainers are included.the feed screw moves freely.this all has normal wear for its age but all still good usable, off of working lathe.please make sure it fits your era of machine.measuring from the valley of the v-grooves it is close to 5 3/16 apart, this is also from wiper screw to wiper screw dimension.thee grooves are close to 9 3/4" long.any other measures let me know.the felt retainers may have a minor ... morebend but easily bent back if needed. I WILL COMBINE SHIPPING WHERE POSSIBLE PUERTO RICO. ALASKA AND HAWAII SHIPPING MAY BE HIGHER ON SOME ITEMS IF THEY ARE LARGER PLEASE EMAIL FOR PRICE INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING BUYERS ARE RESPONSIBLE FOR TAXES AND DUTY FOR THERE COUNTRY. SOMETIMES ITEMS ARE HELD UP IN CUSTOMS AND CAN TAKE A LITTLE LONGER AT TIMES TO RECEIVE YOUR PACKAGE. INTERNATIONAL BUYERS PLEASE DON'T ASK ME TO LIE ON THE CUSTOMS FORM.I WILL ONLY PUT ACTUAL SALE PRICE AND ACTUAL CONTENTS ON IT. NO EXCEPTIONS. INTERNATIONAL BUYERS ARE ALSO RESPONSIBLE FOR KNOWING IF YOU NEED AN IMPORT LICENSE FOR THE ITEM YOU ARE BUYING OR IF IT IS PROHIBITED TO YOUR COUNTRY. ANY REFUNDS GIVEN WILL BE MINUS SHIPPING COSTS.THE ONLY REASON ACCEPTED FOR RETURN IS IF A MISTAKE WAS MADE IN THE DESCRIPTION. IF YOU HAVE A PROBLEM WITH YOUR PURCHASE. PLEASE LET ME KNOW BEFORE YOU LEAVE A NEGATIVE.IT IS BEST TO SEND A NICE EMAIL AND NOT A NASTY ONE.NICE EMAILS GET BETTER ACTION.
South Bend 10L Lathe Motor Dumore 3/4 Hp Dual Voltage With Pulley
Motor removed from South Bend 10L lathe. Everything seems fine with it but i have not fully tested it. I replaced it with larger motor and a VFD when I restored the lathe. It needs relubrication or new bearings to run quiet. Original step pulley is included. It will be shipped in heavy packing material and double boxed Posted with
NOS ORIGINAL SOUTH BEND 9 10K METAL LATHE 5 1/8" FACE DRIVE DOG PLATE SFP-100NK
NOS ORIGINAL SOUTH BEND 9 10K METAL LATHE 5 1/8" FACE DRIVE DOG PLATE SPK 1X10TPI
2 South Bend Lathe 1938 Manuals Tool Cutter Bits, Cutting Screw Threads 9" Lathe
OFFERED FOR AUCTION is this vintage group of paper materials from South Bend Lathe Works of South Bend. Indiana. Included are TWO different manuals from 1938 along with some various mail inserts regarding payment, etc. that came with the ordered instruction manuals, all still in the original mailing envelope from South Bend Lathe. Manual 36A is titled How to Cut Screw Threads in the Lathe(9" Lathe) This manual is 20 pages and fully illustrated. It discusses: Setting Up Standard Change Gear Lathes(9" for Cutting Screw Threads Adjusting Levers of Quick Change Gear Box for Cutting Various Pitches of Screw Theads, Lathe Tools Used for Cutting Screw Threads Correct Position of Lathe Tool for Cutting Screw Threads Position of Compound Rest for Cutting Screw Threads Mounting the Work in the Lathe Adjusting the Thread Cutting Step Taking ... morethe First Cut on a Screw Threaed Use Lard Oil When Cutting Screw Threads in Steel Resetting the Tool After the Thread Has Been Started Finishing the ENd of a Threaded Piece Use of Thread Dial Indicator in Cutting Screw Threads.with Rules for Operating Thread Dial on South Bend Lathe Cutting Multiple Screw Threads Cutting Left Hand Screw Threads How to Calculate Change Gears for Cutting Screw Threads Using Taps and Dies to Cut Screw Threads in the Lathe Standard Screw Thread Forms: American National. French and International System Standard, Whitworth Standard, Square, Acme, and Brown& Sharpe 29 degree Worm Transposing Gears for Metric Screw Threads Lathe With Metric Lead Screw The other manual is also from South Bend lathe works. 1939.it is Number 35 and 12 pages. Entitled How to Grind Lathe Tool Cutter Bits. It discusses: How to Grind Lathe Tool Cutter Bits Lathe Tools and Their Applications Picture Guide Popular Types of Lathe Tool Cutter Bits Equipment for Grinding and Sharpening Lathe Tool Cutter Bits Grinding a Round Nosed Turning Tool for General Machine Work Correct Height of the Cutting Edge Tool Angle Varies With Texture of Work Correct Angles for Gringing Cutter B
How to Run A Lathe Book Care & Operation South Bend Lathe Indiana 1966 Softcover
How to Run a Lathe South Bend Lathe South Bend. Indiana(c) 1966 Revised Edition 56 Some grease or somthing on first page pages are loose but other then that good condition All my auctions have the picture of the item you are actually buying! This is another great Item found in my fathers Collection after his passing I come from a family of Collectors(Hoarders) and I am selling off many great items every week so be sure to check back regularly for other great items like this! Thank you for looking at my auction Have A GREAT Day:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-143bffa29fe-0xfa-
MACHINE SHOP SOUTH BEND LATHE LARGE ORIGINAL ENVELOPE 1965
ORIG ENVELOPE IN GOOD SHAPE 9 X 12" TO HOLD ALL OF YOUR DOCUMENTS.
13" x 5 ft. bed South Bend Engine Lathe Cat CL145B 6958tkl13
USED SOUTH BEND LATHE. MOTOR REWOUND FOR 480 VOLTS THREE PHASE. MOTOR CAN BE RECONNECTED T0 230 VOLTS, BY DISMANTLING THE MOTOR AND RECONNECTING THE WINDING. CAT NUMBER CL145B, 5FT. BED 6958TKL13. 13" SWING. 30" BETWEEN CENTERS. COMES WITH TWO CHUCKS, FACE PLATE, TOOL HOLDER, CENTER, CHUCK KEYS, MISC. TOOLING. PICK UP ONLY, WILL LOAD WITH FORK LIFT. LATHE IS SET UP FOR REVERSING. OR BUYER TO MAKE ARRANGEMENT FOR SHIPPING, WILL CHARGE TO PALLETIZE FOR SHIPPING.
metal lathe chuck 1-1/2"-8,south Bend 9" Lathe Chuck
4-1/2" Lafayette 3 jaw chuck. Surface rust should clean pretty easily.Threaded 1-1/2"8 Posted with
Cushman Chucks 12" Lathe 4 Jaw Monarch South Bend Sheldon Cataract Mount FRESHIP
Cushman Chucks 12" Lathe 4 Jaw Monarch South Bend Sheldon Cataract Mount FRESHIP Up for auction today. We are offering this 12" lathe. 4 jaw. This came from a Monarch lathe. Add this to your shop today! View more auctions from Wehavituneedit! A buyer is strongly encouraged to fully review the item details and ask questions before you bid or buy. Please contact us through eBay or call at 217-779-3992. We do our very best to describe the item being sold. Our store is located 10 minutes south of Quincy. Illinois. Powered by SixBit's eCommerce Solution
METAL LATHE CHUCK 8" 4 JAW SOUTH BEND? GREAT SHAPE
THIS AUCTION IS FOR A METAL LATHE CHUCK. I CANT FIND A NAME ON IT EVEN TOOK BACK PLATE OFF AND NOTHING. IT MEASURES 7 3/4 INCHES. LOOKS TO BE IN GOOD SHAPE I SEE NO DAMAGE JAWS LOOK GREAT AS WELL. NOT SURE WHAT IT WILL FIT. IF YOU HAVE ANY QUESTIONS PLEASE ASK. THANKS FOR LOOKING AND GOOD LUCK! On Jan-26-14 at 18:02:51 PST. Seller added the following information: The back plate is 2 1/2" the chuck is 2 1/4"
South Bend Lathe Hand Lever Bed Turret RARE!
Up for auction is a vintage South Bend Lathe hand lever bed turret. Model LT-106R which is stamped next to the South Bend logo. I am not an expert but from my research I beleive this is for a 10" lathe. The"R" in the model number according to SBL denotes 10" This turret is in good condition for its age however it is missing 3 pieces that can easily be fabricated. The lever is missing but all the mounting hardware is present. The 5/16" nut that locks the turret to the bed is missing. The knob that goes on the small handle that locks the turret from moving is also missing but this does not affect the operation of the unit. Shipping cost includes insurance. This item is very heavy. I will also offer local pickup as a shipping option. If you plan on picking it up let me know so I won't invoice the shipping cost. Please ... morelook at all the photos and ask any questions before bidding. Please read terms of sale below. Check out my other items! Thanks for looking Terms of Sale Paypal is the only form of payment accepted. Items will be shipped to PayPal confirmed US address only. Payment must be recived within 5 days of auction close. Non-paying bidder notice after that time and item re-listed. Combining shipping on multiple items is almost always possible. But some very heavy, oddly shaped or items of different mail classes cannot be combined. Please wait for combined invoice BEFORE paying. We usually ship by the next business day after receiving payment. All items are sold in"as is" condition. We make every effort to describe our items as accurately as possible and we provide numerous pictures for your information. Please ask questions prior to bidding! While we generally do not offer refunds or returns unless we have some how misrepresented the item. We will work with you in good faith to ensure your complete satisfaction. We strive for 5 star positive feedback! If you are unsatisfied in any way please contact us before leaving feedback. By bidding. Each bidder agrees to release and h
MACHINIST MILL LATHE TOOL 4 Jaw 9" Lathe Chuck for Atlas South Bend ?
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID. BT