In 
 
Order by: 
Available to: 
Price: 
 - 
$
69.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
Rebuild Manual& Kit for 9” South Bend Lathe Made in USA By ILION Industrial Services. LLC Horizontal Drive Model A If you are contemplating cleaning ... moreup that old South Bend sitting in the garage. This is what you will need to get the job done. For owners of the vintage Horizontal Drive 9" South Bends who need to disassemble and clean up their machine, this comprehensive instruction manual plus our aftermarket assortment of consumable gaskets, wicks, wipers and oil control felts will provide all that is required to help put your lathe back into its original operating condition. The 106 page professionally produced and published instruction manual included with this kit is fully illustrated with almost 250 photographs plus step-by-step instructions and sequences for disassembling, cleaning, reassembling and adjusting the critical components of the lathe. Click on the page samples above and hit the"zoom" button to see a close-up. The instruction are very straight forward and no prior machinery rennovation experience is required. The manual also includes a list of resources for vintage SBL owners as well as parts references, tool specifications, lubrication guides and material specifications. The text is printed in a font that is two points larger than is typical so if you getting up in years like me, you will not have to work at the bench with your reading glasses on. The consumable parts we include with the kit were all designed to be completely compatible with the 9" series of lathes. The wicks provide adequate lubrication to critical parts of the lathe while at the same time acting as a trap for dirt, chips and sludge. They should be replaced at regular intervals as opposed to trying to clean and reuse the old ones. The capillary oil wicks we provide for the spindle are made from the highest grade tempered spring steel, CNC wound and stress relieved to provide long service life. The lower wicking material is long-strand virgin wool and the cap wick is high quality hard grey felt so you will
$
1055.00
Buy It Now
Condition: Used
Location: La Verne, United States
Based on the serial number it was manufactured between 1910 and 1920. It has a 1-1/2 hp, single phase motor that can be wired for 110 or 220. I don’t ... moreknow much about this lathes condition. I turned it on before pulling it out of the old building that it was in.
$
24.99
Buy It Now
$6.45 Shipping
Condition: Used
Location: New Britain, United States
The following auction is for a South Bend 9" Metal Lathe Tailstock Wrench Tail Stock In good used condition with wear. Works fine. It is off a 9" ... moreSouth Bend 54" Bed Metal Lathe See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 4.50 for USPS 1st Class Mail Shipping with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions.
$
1650.00
Buy It Now
Condition: Used
Location: Hamilton, United States
SOUTH BEND. Swing: 9" Bed Length: 4.5' Type: R Drive: SFG. Centers 24". Equipped With.
$
75.00
Buy It Now
$22.00 Shipping
Condition: Used
Location: Groton, United States
In as is condition. Quill is is frozen The locking liver appears broken off inside the the hole. I did not try to drill it out.
$
299.99
1d 3h 9m 16s
0 bids
$399.00 Now
$16.00 Shipping
Condition: Used
Location: Scotts Valley, United States
VERY NICE CHUCK IN ORIGINAL BOX. 1 1/2-8 BACK PLATE THREAD. CHUCK KEY FITS BUT I DON'T THINK IT IS THE ORIGINAL.
$
198.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Spring Hill, United States
$
22.50
Buy It Now
Free Shipping
Condition: New
Location: Millersburg, United States
Thank you for considering my items Up for your consideration is a needle roller bearing and washer kit for a South Bend 9" A. B& C model and ... more10K models. These needle bearings are 100% new and American made by Torrington. This needle bearing kit is designed to replace the fiber take up washer on the end of your head spindle. This kit comes with 1 needle bearing. 2 hardened washers and complete instructions for dissassembly and reassembly of spindle nut and washer assembly. If you are having problems facing. Have lateral movement(side to side) on your spindle, are rebuilding, fiber washer is worn out or just missing, you should consider changing to needle bearings. with this bearing kit you are able to install and put a slight preload on the bearing thus taking out all backlash and improving overall performance of lathe while under load. The whole process only takes about 10 minutes and you will notice a smoother and possibly quieter lathe( in my case i had a slight oil leak from where the fiber washer was against the head cap. Once i changed to needle bearings my oil leak stopped) This kit will work on all 9" A. B& C and 10K models after 1940. Pre 1940 may need a slight modification to spindle nut Taking off.002 as nut is slightly thicker that after 1940. Some of the money raised will be put towards medical expenses. Thank You for your Time God Bless Our Troops
$
599.95
Buy It Now
$21.50 Shipping
Condition: Seller refurbished
Location: Keller, United States
Cleaned, painted, and lubricated to as-new condition. Attaches to carriage with (2) 5/16"x2" NC cap screws (not included).
$
29.99
Buy It Now
$9.85 Shipping
Condition: New
Location: Waukegan, United States
Up for sale are (20) 1/4" square H.S.S. tool bits for a lathe or shaper mill. There is (10) new and (10) that have been ground on.
$
64.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
The belt has a textured SBR rubber face on both sided of the belt and is reinforced by overlapping nylon fabric belts sandwiched in the center to prevent ... morestretching and breakage. The belt DOES NOT require you to remove the spindle on your horizontal drive lathe as you would with an endless belt and it is perfectly suited for all underneath drive lathes where a spliced belt is required.
$
59.99
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
Very Nice- Complete Original rocker type tool post for a South Bend 9" or 10K lathe with tool post wrench. Tool post base measures 1 3/8" x ... more1 1/4" x 1/4" Body diameter is 7/8" Stands 3" to the shoulder. Interior post dimensions are 7/16" wide x 1 5/16" With the washer and rocker in place. Original bolt is in good order, not compressed as often seen, is removable. Nice 3/8" tool post wrench is also included. All in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
39.99
Buy It Now
$8.65 Shipping
Condition: Used
Location: Nashville, United States
South Bend branded lathe collet chuck. 5" diameter, never used! Features: Can be machined to fit your part New. In original box 6K collet Fits Light ... moreTen South Bend lathe Believe this will fit 9" South Bend lathe as well Shipping to US only
$
27.95
Buy It Now
Free Shipping
Condition: New
Location: Larwill, United States
$
9.00
Buy It Now
Free Shipping
Condition: New
Location: Pell Lake, United States
This is for the nut only. Picture #2 is just for demonstration purposes. It is only an aesthetic difference, either will work.
$
69.50
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
This is a 3D printed plastic (PLA+). This gear ratio gives a perfect the 1:1.27 with a 0.000 margin of error as can be seen in image 3. Gear depth. 375.
$
895.00
Buy It Now
Condition: Used
Location: Bell Gardens, United States
Delta Milwaukee 1/3 Horsepower 110v Single Phase Motor Made In U.S.A.
$
2399.00
Buy It Now
Condition: Used
Location: Fair Haven, United States
South Bend No. 9 lathe with lots of tooling. It is a 36" bed. Supper nice for the age.
$
2650.00
Buy It Now
Condition: Used
Location: East Hampton, United States
Taper In Spindle Nose Longitudinal Feed Range (48) Cross Slide Travel Cabinet Base. Spindle Nose Type Spindle Speeds (12) All machine prices include loading ... moreunless otherwise stated. 230 v/ 1 ph/ 60 Hz.
$
100.00
Buy It Now
$16.40 Shipping
Condition: Used
Location: Santa Monica, United States
Exact item shown - I believe this closer fits the 9 and 10 K series lathes - I included two catalog pages at the end of the photos, the one with the orange ... moreband is 1936, the other is 1947. This closer looks more like what's in the 1947 catalog page because of the solid knob.
$
29.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
The take-up washer was typically made of hard red fiber and contained a brass stud to allow the take up nut and washer to rotate together when the spindle ... morewas in motion. When doing face plate turnings this excessive lateral play can often cause chatter or can cause drift when turning up to a shoulder.
$
22.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
For Models : 9", 10K Lathes - Standard & Quick Change, 9", 10K, 10", & 13" H.L. Bed Turrets, 9", 10K, & 10" H.L. Double Tool Slides, Horizontal Motor, ... moreUnderneath Motor, Flat Belt and V Belt. South Bend 9" & 10K Lathes, Models A, B, & C Standard & Quick Change Parts Manual.
$
124.95
Buy It Now
$14.00 Shipping
Condition: Used
Location: Uxbridge, United States
FREE SHIPPING IN US! South Bend Lathe 9" 10" Compound Screw Feed Nut PT95NK1 New Compound Nut for South Bend 9" 10" Lathes South Bend ... morePart Number PT95NK1 ACME 3/8" x 10 Right Hand Threads 5/8" Diameter x 1-1/8" long. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying I leave Feedback at time of shipping to notify buyer of shipment. No feedback ransoming here! Questions? email me! Thanks for looking.
$
74.99
Buy It Now
$9.25 Shipping
Condition: Used
Location: New Britain, United States
South Bend 9" 10K Bull Gear. Complete assembly with locking pin and retaining spring. Great condition. No b roken or chipped teeth. Please see my ... moreother listings for more lathe parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$
40.00
Buy It Now
Free Shipping
Condition: New
Location: Ionia, United States
SOUTH BEND LATHE MODEL 9" THREAD CHASING DIAL.
$
495.00
Buy It Now
$28.90 Shipping
Condition: Used
Location: Fair Haven, United States
South Bend Collets Hardinge, Royal RC and draw bar. 732,,642,,8271. Hardinge 11/16 ,1/32 ,1/4, 7/16, 3/32. Royal RC Rivett 3/8, 9/32, 3/16, 1/4, 5/16, ... more1/8, 1/4.
$
79.00
Buy It Now
$14.25 Shipping
Condition: Used
Location: Stamford, United States
Shop made from aluminum billet. Please check the photos to verify condition and correctness of item. I will combine shipping whenever possible. Email ... moreme to request an invoice before paying for multiple items. Please check my other listings. Payment must be made within 2 days of auction close. I will appreciate positive feedback after you are satisfied with the item. I will then return good feedback. If you feel the item is not as described please let me know before leaving feedback. I want to work with you to resolve any problems. Email me any questions you have before bidding. Thanks for looking.
$
32.99
Buy It Now
$17.18 Shipping
Condition: New
Location: Niles, United States
4 NEW 8 OUNCE BOTTLES OF WAY AND SPINDLE OIL FOR ALL SOUTH BEND AND LOGAN LATHES. PERFECT FOR SPINDLE BEARINGS, GEARS AND WAYS. SUNOCO TOP QUALITY OIL. ... moreSEE OTHER OIL OPTIONS FOR SINGLE BOTTLES AND DUAL SETS.
$
39.50
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
Our version of the South Bend 9"/10k thread chasing dial for hobbyist, or new to the lathe and unsure of how to build one of the kits. South Bend 9"/10k ... morethread chasing dial. This thread dial also has a brass shaft do eliminate the chance of rust.
$
21.90
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
South Bend Lathe 13" Spindle Wedge Block. The chuck is removed by placing a wrench on a jaw and turning it off, or your preferred way. Once the chuck ... moreis removed simply rotate the Bull gear back and the wedge block can be removed.
$
50.00
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
This is a 3D plastic printed gear stack. CHANGE GEAR SET 3D Printed. That equates to 0.00047 mm on 2 " (50.8 mm) of threads. That is 1/170th the thickness ... moreof average human hair. While not a perfect the 1:1.27 ratio, when used with a 8TPI lead screw, it's 1.26984 ratio gives a margin of error of. 0025" per foot.
$
53.00
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
This is a 3D plastic printed gear stack. That equates to 0.00047 mm on 2 " (50.8 mm) of threads. That is 1/170th the thickness of average human hair. ... moreWhile not a perfect the 1:1.27 ratio, when used with a 8TPI lead screw, it's 1.26984 ratio gives a margin of error of. 0025" per foot.
$
29.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
If you are restoring an older Southbend lathe, don’t miss your chance to pick up a set for your machine. We are more than happy to help. The four sintered ... morebronze bearings are made by Oilite and are fabricated of porous bronze which retains oil very well and reduces wear on the shaft.
$
99.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
If you are contemplating cleaning up that old South Bend Lathe sitting in your garage, this combination kit is what you will need to get the job done. ... moreAs you will notice, this is not a fuzzy Xerox reprint of an older manual that you've probably seen before.
$
69.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
If you are contemplating cleaning up that old South Bend sitting in your garage, this kit is what you will need to get the job done. They should be replaced ... moreat regular intervals as opposed to trying to clean and reuse the old ones.
$
12.99
Buy It Now
$6.45 Shipping
Condition: Used
Location: New Britain, United States
A local Vocational Trade School is in the process of closing its Machine Shop program. As a result there will be an assortment of Tools and Accessories ... moreavailable for sale. I will list these items as they are released for disposition. I will do my best to describe these items as accurately as possible. However. Sale is final so please feel free to a sk any questions that you might have. Thank You One of the satellite machine shops is presently being liquidated. The Lathe Chucks. Face Plates and other miscellaneous tools that have been in storage are now being released for disposition. Offered here is a Carriage Apron from a 9" South Bend Lathe. This apron is for a carriage with both power cross and longitudinal feeds. It is also equipped with the half nut. The assembly needs a thorough cleaning. But other than that the gears, handles, casting, etc. all look to be in good condition.
$
68.69
Buy It Now
Free Shipping
Condition: New
Location: Milford, United States
Bottles of the oils/lubricants needed for yourSouth Bend Lathe, including Lube-V specializes inhigh-performance lubricating oils and fluids with strong ... moretechnical know-how knowledge. AboutLube-V Product Line : Low Price, Outstanding Performance, and Customized Solutions.
$
29.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
If the oilers on your South Bend Lathe are mangled, missing the covers or if the spring is broken, then this is what you will need to replace them. These ... moreoriginal oilers were manufactured by Gits and they cross reference to the original South Bend part number 155x38.
$
25.95
Buy It Now
Free Shipping
Condition: New
Location: South Whitley, United States
1" WIDE BELT BY UP TO 70" LONG CUSTOM CUT TO LENGTH. You can order up to 70" maximum length.
$
21.00
Buy It Now
$5.40 Shipping
Condition: New
Location: Merrimack, United States
This gear is made of super strong NYLON and fits on the existing spacer/bushings. Gear thickness 0.81".
$
174.99
Buy It Now
$19.63 Shipping
Condition: Used
Location: Cape Neddick, United States
I've been told this is for a South Bend heavy 10 lathe. The mounting bracket is missing.
$
65.00
Buy It Now
$9.45 Shipping
Condition: New
Location: Berrien Springs, United States
New Steady Rest Jaws / Fingers with Roller Bearings for South Bend 9" & 10K & Heavy 10" Lathes and Logan 10" & 11" Lathes. South Bend Lathe 9" & 10" Steady ... moreRest Jaws / Fingers with Bearings. Replaces South Bend part PT128NR1 and Logan parts LP-2417 & AC-192.
$
499.99
Buy It Now
Free Shipping
Condition: Used
Location: Merced, United States
Free shipping excluded from Hawaii and Alaska South Bend 16 lathe headstock Pulled From A Working Lathe In Good Condition. Please see pics for up close ... moredetails and measurementsWe took apart a whole lathe and will be listing parts from it. So please check back over the next few weeks. We sacrificed one lathe to hopefully get a bunch more up and running. If you need a part hit us up as well amd we will see if we have it. But please be specific and send pics of possible DVID
$
109.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
If you are contemplating cleaning up that old South Bend sitting in the garage, this is what you will need to get the job done. The 106 page, professionally ... moreproduced and published instruction manual included with this kit is fully illustrated with almost 250 photographs plus step-by-step instructions and sequences for disassembling, cleaning, reassembling and adjusting the critical components of the lathe.
$
80.45
Buy It Now
Condition: New
Location: Saint Charles, United States
Morse taper shank: 2MT. 6 holes for 6 tools. You may ask for freight cost before buying tools. Product features. Thread: 3/8"-16. at Fixed Prices.
$
4500.00
Buy It Now
Condition: Used
Location: Eldred, United States
Everything works on this lathe. 4 Jaw Cushman 6" chuck. Steady rest. Jacobs chuck.
$
142.99
Buy It Now
$14.99 Shipping
Condition: Used
Location: New Britain, United States
As shown in pictures.
$
14.00
Buy It Now
$5.40 Shipping
Condition: New
Location: Merrimack, United States
South Bend, Logan, Atlas, Sheldon BXA larger Aloris style QCTP Dial Indicator Mount, Dual Position. Rugged mount with dual position rotation for indicating ... moreedge or face of stock. Comes with bolts and nuts as shown. Condition is "New". Shipped with USPS First Class. *Note: Does not include digital indicator shown for reference only. 3D printed Color varies but typically grey or silver plastic.
$
65.00
Buy It Now
$9.45 Shipping
Condition: New
Location: Berrien Springs, United States
FREE SHIPPING IN US! South Bend Lathe 13" Steady Rest Jaws/ Fingers with Bearings New Telescoping Steady Rest Jaws/ Fingers with Roller Bearings ... morefor South Bend 13" Lathes. Take those oily& messy brass fingers out and replace them with these smooth running roller bearings! 1] Set of 3 Fingers- they are 3/4" diameter by 3" long with 5/8" diameter shielded bearings. Replaces part PT129T1. Designed for full range of motion- from.113" minimum up to 3.937" maximum diameter. Steady rest is NOT included- only pictured to show range of motion! Check out my other listings for more Atlas. Craftsman and South Bend Lathe parts! I leave Feedback at time of shipping to notify buyer of shipment. No feedback ransoming here! Questions? email me! Thanks for looking. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Posted with
$
350.00
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Ventura, United States
13 inch south bend lathe quick change gearbox. Unfortunately missing tags. I have other parts from this parted out lathe. Sold as is buyer pays shipping ... moreThe handles on this need some loosening. But everything looks in good shape. Posted with
$
300.00
Buy It Now
Free Shipping
Condition: Used
Location: North Hollywood, United States
ORIGINAL SOUTH BEND 10K METAL LATHE HEADSTOCK ASSEMBLY 1 1/2" 8 TPI INCLUDES COUNTERSHAFT ROD The photos are accurate to each description and exact ... moreto what you will receive. Please feel free to email with any questions!
$
200.00
Buy It Now
Condition: Used
Location: North Hollywood, United States
In used condition. Local pick up from North Hollywood California 91605.
$
64.95
Buy It Now
$9.75 Shipping
Condition: New
Location: Indianapolis, United States
Z-axis dial indicator clamp for South Bend 9" and 10K(10" lathes. Will also work on LOGAN model 820 and model 200 Lathes. CLAMP ONLY! THE DIAL ... moreINDICATOR IS NOT INCLUDED. FOR CLAMP WITH DIAL INDICATOR GO TO: http:cgi.ebay.com/South-Bend-lathe-dial-indicator-and-clamp-9-10K-260685415126?pt=LH_DefaultDomain_0&hash=item3cb20fc2d6 Gauge clamp allows for precision indication of the carriage location(Z axis) on South Bend Lathes. Included: Billet machined gage clamp. Polished 6061-T6 aluminum, precision hinge, and wing screw Instruction sheet Works on either the left or right side of the carriage. Gauge is easily repositioned with sturdy wing screw(no need to reach for an Allen wrench) All hardware stainless steel Polished aluminum will not mar ways. The recommended dial gauge is Travers Tool 57-029-999(dial body is The clamp will also work with some other lug-back style dial gauges. Photos show zeroing procedure. FREE SHIPPING! Limited time only) Comments from customers who bought this exact item: great tool. fast shipping. This seller went the extra mile. and the product is A number one! Very Nice. Excellent item. Lathe is NOT included) Shipping weight is 1 lbs. 8-5/8"x5-3/8"x1-5/8" box. Indiana Residents Must Pay 7% Sales Tax US customers only.
$
16.99
Buy It Now
Free Shipping
Condition: New
Location: Bakersfield, United States
Here we've taken the shirt everyone says they love the Gildan 2000 series Dark Heather Grey, these have to be the longest lasting t-shirts on the planet. ... moreHere we've formulated a new mix of white ink again built to last forever. We seriously stand behind this shirt.
$
134.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
As you will notice, this is not a fuzzy Xerox reprint of an older manual that you've probably seen before. The details include the sequence for disassembling, ... morecleaning, reassembling and adjusting the critical components of the industrial series of lathes.
$
29.99
Buy It Now
$8.95 Shipping
Condition: Used
Location: New Berlin, United States
Up for sale is this South Bend lathe brass spanner wrench. Part number is 3201LT. This works on the threaded spindle protectors.
$
325.00
Buy It Now
Free Shipping
Condition: New
Location: Spring Hill, United States
All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. International ... moreBidders Please Inquire About Shipping Cost Prior To Bidding SOTTOF SALES In storage for years. Never installed, shelf wear only. D43335. EBAY AUCTION POLICIES: Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
$
289.42
Buy It Now
$13.80 Shipping
Condition: New
Location: Warren, United States
This compact grinder has many uses. These are just a few of the uses. The grinder is accurate and simple to mount. I hand build your tools. • Smooth running ... more1/4 hp, 10,000 - 30,000 rpm variable speed motor provides plenty of power for grinding hardened steel parts.
$
19.50
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
Our version of the South Bend 9"/10k lathe thread cutting stop. on your South Bend 9"10k lathe. This is our effort to make that available. This tool can ... morebe painted to match your lathe. South Bend 9"/10k Thread Cutting Stop.
$
21.90
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
South Bend 9A Spindle Lock Wedge Block. The chuck is removed by placing a wrench on a jaw and turning it off, or your preferred way. Once the chuck is ... moreremoved simply rotate the Bull gear back and the wedge block can be removed.
1 2 3 4 5 6 7 8 9 10 11 12
 In 

Past Items  
 
Nice- Original lead screw for a 3 foot South Bend 9" lathe. Model C. The lead screw measures 39 1/4" end to end. Threaded length is 23 1/2" diameter is 3/4" Threads are in fine order with a few very light marks noted. Unit includes woodruff key and nut. All in good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Original headstock spindle for a South Bend 9" lathe. Thread mounting diameter is 1 1/2" x 8 TPI. Inside taper is MT3. Spindle mounting threads are in good order. Some light marks noted, as shown. Woodruff key is also included. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13e53857cdb-0xf4-
LOTS OF AUCTIONS ONLINE NOW! Brand Neatro Packaging In Box Condition Excellent Quantity 12 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LOTS OF AUCTIONS ONLINE NOW! Brand Atlas Packaging None Condition Excellent Quantity 1 Set of 4 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 1/2" 3/4" 1" 1 1/2" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LOTS OF AUCTIONS ONLINE NOW! Brand Williams Packaging In Original Box Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Williams# 2050. 3/4" x 3/8" Shank. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LOTS OF AUCTIONS ONLINE NOW! Brand E Packaging E Condition E Quantity E Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I am not sure what size SB lathe this attachment is from. The inside dovetail is 2 3/4" in the closed position. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist ... moreand woodworker.
You are bidding on the item shown. It works and is in good used condition. P lease see pictures and email me with any questions. See my other auctions; I will combine shipping when possible. If you have a question. Please ask it BEFORE the auction ends! Payment required within 2 days. No local pickup. No buy it now. PayPal only.
ARMSTRONG WILLIAMS TOOL HOLDER SOUTH BEND LATHE ARMSTRONG WILLIAMS TOOL HOLDER TOOLHOLDER FOR SOUTH BEND LATHE YOU ARE BIDDING ON ARMSTRONG WILLIAMS TOOL HOLDER TOOLHOLDER FOR SOUTH BEND USED IN COOD CONDITION All purchases are expected to be made within 72 hours of close of the auction or will be CONSIDERED for relisting or offered to next highest bidder. So please have your finances in order. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Orders above 149 lbs. must be shipped via freight carrier.We are giving you the chipest freight quote.All estimates are subject to change depending upon drop-off location. Carriers will assess an extra charge if delivery is made to a residential area and/or if the services of a lift gate are required. The buyer has ... more7 days to return the item(the buyer pays shipping fees) The item will be refunded. All e-mails will be responded within 12-24 Hours. You may e-mail us anytime Please visit my store.
CRAFTSMAN CROTCH CENTER For use with Atlas and Craftsman 12" and 10" lathes or any other with a#2MT taper tailstock 2" diameter. 1" V-slot. No. 2 Morse Taper shank. Marked"CRAFTSMAN MADE IN USA" This used crotch center is in excellent condition-has a few gouges on the end which has no effect on its use as shown in the 3rd photo Please see my other listings I always combine shipping when possible.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e53f445de-0xff-
LOTS OF AUCTIONS ONLINE NOW! Brand Ready Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
2 SOUTH BEND LATHE DRIVE FACE PLATE off 10"south bend lathe
SOUTH BEND 9 LATHE CHANGE GEAR BANJO BRACKET GUARD. 9W-146B, NICE CONDITION. Please let the pictures help with the description and condition and view my other auctions for more LATHE TOOLING + PARTS. Check my feedback. Satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
SOUTH BEND 9 10K LATHE CHANGE GEAR BANJO BRACKET. NICE CONDITION. Please let the pictures help with the description and condition and view my other auctions for more LATHE TOOLING + PARTS. Check my feedback. Satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
Lathe faceplate not sure what model it's off of. Part# K1832 measures 11" across I seen no visable cracks or welds. There are some small holes partially drilled in the center. On Feb-24-13 at 22:51:37 PST. Seller added the following information:
ATLAS CRAFTSMAN SOUTH BEND LATHE JACOBS#34 DRILL CHUCK+KEY 0-1/2 CAP#2 MT SHK Click to Enlarge Click to Enlarge FINE USED AND SMOOTH WORKING JACOBS#34 0-1/2 CAPACITY DRILL CHUCK WITH KEY AND#2 MORSE TAPER SHANK FITS 9-12 INCH ATLAS CRAFTSMAN LATHES. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
LOTS OF AUCTIONS ONLINE NOW! Brand Unknown Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13e550b4977-0x100-
LOTS OF AUCTIONS ONLINE NOW! Brand South Bend Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LOTS OF AUCTIONS ONLINE NOW! Brand Western Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 1 5/16" x 9/16" Shank. 5/8" Max Bar. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LOTS OF AUCTIONS ONLINE NOW! Brand Armstrong Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Shank is a bit shaved. 1" x 7/16" Shank. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LOTS OF AUCTIONS ONLINE NOW! Brand Furnas Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Was in working order when removed. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LOTS OF AUCTIONS ONLINE NOW! Brand Cutler Hammer Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Untested. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
You are bidding on 4 chuck wrenches. The ends are square; Diameters are one at 3/8.Two at.280 dia. last one is.300 dia. That size is fron flat to flat. Thanks for looking.
You are bidding on 2 five inch dia backing plates. If I remember correctly the threads are 1 1/2-8. They do fit a 9 inch southbend lathe. Should fit other lathes. The one on left is.988 thick& the flange is.443 thick. The one on right is 1.310 thick& the flange is.567 thick. Thanks for looking. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13e55d6d32a-0x100-
This is a used lathe chuck backplate with 1-1/2" 8tpi threads. The locating diameter in the bore is 1.520" The overall diameter is 6.2" It has 3 tapped holes which look to be 5/16" 18. The plate is about 1/2" thick. Not including the part that's already turned down. Shipping will be $5. 4 5 sent Priority mail in the US only. Thanks for looking.
You are bidding on a used armstrong#83-673 knurl holder. It has knurls installed. Plus 2 more extra sets. It is 3/8 thick. The heighth is.777. It was milled down for fitment. You can see in the last picture. It was done for clearance to fit holder. It all works great. Knurls all in great condition. Thanks for looking.
Starrett Dial Test Indicator in Box Case.
Excellent Condition- Three Original South Bend Lathe Works brochures on 13" Turret lathes from 1956. 1957 and 1958, Bulletins 5624, 5813 and 5624. All six fold, double sided. Great collectible pieces. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOT OF 15 BRASS COLLETS GENUINE SOUTH BEND.all good.the 1 picture has 14 collets in it but a do have 15 that i am selling and a brass wrench.
Welcome to my site! 9" South Bend Metal Lath e Comes exactly as shown. With what is shown. Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Item is in pretty good condition. It shows some signs of wear. Which I tried to indicate in the photos, but functionally, it will work great. There are some rust stains here and there. Center hole is 3/4" in diameter COMBINED SHIPPING IS AVAILABLE WHENEVER POSSIBLE! If you have any questions or I can be of any help. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase Price will be promptly refunded after I receive the item in the same condition it was sent in. Item will be packaged with care and will ship quickly. ... moreI always ship out items within 2 business days after payment is received. I take my shipping and packaging seriously! Please see ratings. I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking!
ARMSTRONG TUNGSTEN CARBIDE TOOL HOLDER FOR ATLAS. CRAFTSMAN OR SOUTH BEND METAL LATHE. ARMSTRONG CHICAGO USA" WRITTEN ON ONE SIDE, NO TO-L ARMSTRONG TUNGSTEN CARBIDE PAT'D TOOL HOLDER" ON THE OTHER SIDE. MEASUREMENTS ARE 3 3/4" SHANK, 3/8" WIDE, AND 7/8" HIGH. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e5f5fc768-0x102-
This is a nice vintage Compound Rest from a Vintage 9" South Bend Workshop Metal Lathe with a 9" swing and 3 foot Bed. It is Serial#55177 Catalog No. 405-Y. Made by South Bend Engine Lathes In South Bend Indiana USA. The previous owner told me it was from 1937 but I don't have verification of that. It comes as pictured- some wear and tear some chew marks on front edge but moves smoothly and in good working condition Local pick-up available. I will combine shipping on multiple purchases when possible.
Description: Here's a real nice complete 9" South Bend Metal lathe Compound Swivel Tool Post Rest Slide. Nice clean numbers that are not all messed up and great overall shape. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel ... morePost(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder. 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13e60c54a54-0xfc-
Description: Here's a real nice 9" and 10K South Bend Metal Lathe Cross Slide Thread or Threading Stop Attachment/ Accessory. The bottom of the V is 1 5/8" when it's closed as pictured. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for ... moreshipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
Here is a South Bend LEVER RELEASE 4-WAY TOOL POST for a 13" SB lathe. This SB logo part has PN STC 105T. In excellent condition. But missing one rocker,otherwise complete. Part has been completely stripped and correctly refinished in SB grey.A hard to find part in overall excellent condition.Shipping flat-rate to the lower 48 is $17 all others must contact seller for actual cost.
South Bend Lathe Turn-nado 17" Ops& Parts Manual Turn-nado Machine Tool Manual Includes information on: specs. Installation, lubrication, operating instructions, attachments, and more. Please view the images above for more information. Covers models: 17" South Bend Turn-nado Geared Head Lathe Your order will come as a high quality copy complete in new binder. Original version of the manual for easy reading. Most of the time orders are shipped out the same day they are received.
Offered is a nice South Bend tool post. It is in good used condition. There is no box. The tool post is for a 9" or 10" lathe. c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13e62dd7189-0xfc-
12" 3 Jaw lathe chuck.works smooth.center of chuck has been hit with cutting tool and has scars but does not effect function of chuck. to cut the cost of shipping it will be disassembled and shipped in two boxes to meet FRB weight limit. Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make ... moreother arrangements for payment. Please be aware that I ship as soon as payment is received. If you change your mind about the item after it is shipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others, plea
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Used. South Bend Lathe 14.5 Apron. Selector Lever. Thanks. Check out my!
Here is a South Bend Lathe Stop in excellent condition. This part is CL 2250T and fits 13inch SB lathes or similar. Does not have the stop bolt but the binding bolt is intact. Shipping flat-rate to the lower 48 is $7 all others must contact seller for actual cost.
Nice South Bend lathe 9 inch tailstock Very clean. From an older machine that did not have an excessive amount of use. Free shipping in USA only.
No welds or cracks. It's in good condition. I also have these parts to sell. Cheap. South Bend lathe parts 9. 10K unless noted 10 for Heavy 10 SMALL PARTS ~~ 70 pieces 4) spindle bearing pair 1) carriage feed rack. 6”spacing 2) Tailstock feed screw ~4) chasing screws SB10 thrust bearing SB10 thrust brg nut. Washers SB9 clutch feed handle 4) thrust bearing 4) thrust adjustment nut. Washers 8) feed handle nut 0) X feed nuts 6) SB9 crank pinion 1) SB10 crank pinion 4) lathe carriage brakes 4) cross feed handles 4) SB9 cross slide gib 0) SB9 top slide gib 3) SB10 gear train bushings. Studs 4) SB9 gear train bushings. Studs 3) feed dials SMALLER PARTS 3) taper gib screws ~50) oil cups ~30) wipers. Retainers ~16) spindle bearing wicks ~8) topslide swivel wedge FASTENERS. Etc ~20) misc parts ~200) special fasteners 3) 10L brake bolts CASTINGS ... more~50 pieces 5) gear train banjos 15) bearing caps. Clamp dogs, etc 6) SB9 feet 2) SB9 bull gear covers with door 0) SB9 belt cover 8) headstock gear cover 1) SB10 chasing screw cover 2) headstocks 1) SBK motor mount(3 castings) 1) SB9 tailstock foot 0) SB9 driver cone pulleys 0) SB9 headstock cone pulley 2) SB10 saddle 3) SB9 saddle 3) SB9 cross slide 1) SB10 cross slide 1) SB9 top slide 1) SB9 top slide base Insurance IS included in US shipments. Foreign bidders. Please arrange international shipping before you bid. You can get an estimate at http:ircalc.usps.gov/ I'm happy with Paypal if you get the funds from your bank or Paypal balance and not from a credit card. I'm also selling various supplies and CAE software originally purchased for a prototype machine shop I used to operate in San Francisco. Just ask if you would like me to set up an auction for any of it. Powered by The free listing tool. List your items fast and easy and manage your active items. 37,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28d03%3C%3E37-13e65931877-0xfd-
No cracks or welds. It's in good condition. I also have these parts to sell. Cheap. South Bend lathe parts 9. 10K unless noted 10 for Heavy 10 SMALL PARTS ~~ 70 pieces 4) spindle bearing pair 1) carriage feed rack. 6”spacing 2) Tailstock feed screw ~4) chasing screws SB10 thrust bearing SB10 thrust brg nut. Washers SB9 clutch feed handle 4) thrust bearing 4) thrust adjustment nut. Washers 8) feed handle nut 0) X feed nuts 6) SB9 crank pinion 1) SB10 crank pinion 4) lathe carriage brakes 4) cross feed handles 4) SB9 cross slide gib 0) SB9 top slide gib 3) SB10 gear train bushings. Studs 4) SB9 gear train bushings. Studs 3) feed dials SMALLER PARTS 3) taper gib screws ~50) oil cups ~30) wipers. Retainers ~16) spindle bearing wicks ~8) topslide swivel wedge FASTENERS. Etc ~20) misc parts ~200) special fasteners 3) 10L brake bolts CASTINGS ... more~50 pieces 5) gear train banjos 15) bearing caps. Clamp dogs, etc 6) SB9 feet 2) SB9 bull gear covers with door 0) SB9 belt cover 8) headstock gear cover 1) SB10 chasing screw cover 2) headstocks 1) SBK motor mount(3 castings) 1) SB9 tailstock foot 0) SB9 driver cone pulleys 0) SB9 headstock cone pulley 2) SB10 saddle 3) SB9 saddle 3) SB9 cross slide 1) SB10 cross slide 1) SB9 top slide 1) SB9 top slide base Insurance IS included in US shipments. Foreign bidders. Please arrange international shipping before you bid. You can get an estimate at http:ircalc.usps.gov/ I'm happy with Paypal if you get the funds from your bank or Paypal balance and not from a credit card. I'm also selling various supplies and CAE software originally purchased for a prototype machine shop I used to operate in San Francisco. Just ask if you would like me to set up an auction for any of it. Powered by The free listing tool. List your items fast and easy and manage your active items.
It's in good condition. I have many small SB parts and will sell cheap enough to buy for spares. Just return them in a few days if you don't like them. I guarantee your satisfaction. Insurance IS included in US shipments. Foreign bidders. Please arrange international shipping before you bid. You can get an estimate at http:ircalc.usps.gov/ I'm happy with Paypal if you get the funds from your bank or Paypal balance and not from a credit card. I'm also selling various supplies and CAE software originally purchased for a prototype machine shop I used to operate in San Francisco. Just ask if you would like me to set up an auction for any of it. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e65931832-0x10a-
Gold International Machinery Corporation | South Bend Lathe Our Inventory Number: 6735-440 Technical Specifications: 220 Volts/ 3 Phase/ 60Hrz, Swing over bed: 10" Diameter above the carriage legs: 9.5" Diameter under the cross slide: 5" Equipped With: 3 Jaw chuck, 4 Jaw chuck, Collet attachment, Tail stock chuck, Tail stock live center, Quick-change tool post, 6) various quick-change tool holders, Steel face plate, Steady rest, Large boring bar, This item is in very good condition! We can palletize. Cover and load this item for an additional fee. Please inquire. We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located ... moreon the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal business hours(9am-5pm EST) Monday through Friday at 1-800-619-GOLD. Pleas
10 Pitc h 2.5" Bore. 3.5" Gear Diameter 33 Teeth Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
The bed will fit an A. B or C lathe. The lead screw is for a model B. Length of bed is 42" and the serial number is 3679NBR 8. I know the wear on the bed is not very much but I cannot remember the exact amount. The lead screw shows very little wear.
SOUTH BEND 9" 10K LATHE IDLER CHANGE GEAR BOLT BUSHING SPACER. 5/8" BORE. Please let the pictures help with the description and condition and view my other auctions for more LATHE TOOLING + PARTS. Check my feedback. Satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
Lantern or Rocker style 4" tool post. Accepts Armstrong and Williams style tool holders with 3/8" shank for Logan, Craftsman, Atlas, South Bend, Hardinge, Clausing, and other lathes. Threads are all good. Shows some wear. But is solid and works good. I don't have the wrench. Auction is for exactly what is shown in the photos.
J.H. Williams No 0-L LH cutting tool holder with 3/8" shank for Logan. Craftsman, Atlas, South Bend, Hardinge, Clausing, and other lathes. Excellent condition, w orks great. Threads are all good. Takes 1/4" cutting tools. INCLUDES HSS cutting tool shown in photo.
Armstrong No15 yolk style combination boring bar and cutting tool holder. Will hold a round boring bar or 1/4 square HSS or carbide tipped cutting tool in LH or RH direction. Will work for Logan. Craftsman, Atlas, South Bend, Hardinge, Clausing, and other lathes. Reversible for LH or RH cutting. Works great. Threads are all good. INCLUDES wrench for screw(not shown in photos) `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13e6917b7f0-0xfe-
Armstrong 2080 boring bar holder for Logan. Craftsman, Atlas, South Bend, Hardinge, Clausing, and other lathes.
Armstrong No 20 straight cut off tool for Logan. Craftsman, Atlas, South Bend, Hardinge, Clausing, and other lathes. Includes HSS cutting blade seen in photos.
Nice- Original South Bend apron trough and screws assembly for a South Bend 9" Model A or B or 10K lathe. Trough is South Bend part number AS227NK1. Original screws are part number 101x104. All in good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
SOUTH BEND LATHE 11in. LEAD SCREW SUPPORT HEAD STOCK END CAME OFF A SB 1920s- 1930s 11in. LATHE 7/8 CENTER HOLE 1.690 0UT SIDE BANJO SUPPORT IN EXCELLENT CONDITION
1) unknown brand of drill chuck.2mt,1) jacobs 2mt drill chuck in a 2-3mt adapter,1) possibly internal threading tool?1) craftsman cut off tool holder,1) no name left tool holder,1) tool holder could be used left or right,1) straight tool holder,3)taper adapters,1)2mt dead center,1)straight dead center,1)2mt cup center with point(assuming for wood)no international
4 Morse Taper dog driver with center.no international
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 04131000001 Manufacturer: SOUTH BEND Description: SOUTH BEND 770-R LATHE 10" X 37" Capacity: 10" X 37" Model Number: 770-R Serial Number: Additional Information: NO MOTOR BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our eBay listing– BE SURE TO INCLUD
This is an original SOUTH BEND LATHE WORKS drumswitch that was made specially for South Bend by FURNAS. The switch itself is in very good shape with original paint etc. some corrosion on the top) Unfortunately I lost the two cover screws and have temporarily replaced them with under-sized sheet metal screws. The copper contacts and mechanism look and work great. Great original condition and perfect if you're restoring a South Bend Lathe. Don't miss this as they are getting hard to find. Plus I'm including FREE Priority mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ... more~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in
Very Nice- Original matching set of original headstock guards for a South Bend 9" lathe. Bull gear guard is South Bend part number PT149N1. Quill guard is South Bend part number PT148N1. Safety guard is AS362N1. One of the guards has the provisions for mounting the forward reverse motor switch base. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
For Sale Used South Bend 13" Lathe. Qick Change Gear Box. Real Nice Unit. Clean well Cared For. The Chart Looks To Have Been Replaced. Thanks. Any Questions just ask. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Thanks.
6" BUCK LATHE CHUCK 4 JAWS FOR SOUTH BEND LATHE 6" LATHE CHUCK 4 JAWS FOR SOUTH BEND LATHE YOU ARE BIDDING ON USED IN GOOD CONDITION 6" LATHE CHUCK 4 JAWS FOR SOUTH BEND LATHE THIS CHUCK HAS 1 1/2" 8 TPI THREAD All purchases are expected to be made within 72 hours of close of the auction or will be CONSIDERED for relisting or offered to next highest bidder. So please have your finances in order. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Orders above 149 lbs. must be shipped via freight carrier.We are giving you the chipest freight quote.All estimates are subject to change depending upon drop-off location. Carriers will assess an extra charge if delivery is made to a residential area and/or if the services of a lift gate are required. ... moreThe buyer has 7 days to return the item(the buyer pays shipping fees) The item will be refunded. All e-mails will be responded within 12-24 Hours. You may e-mail us anytime Please visit my store. 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e6d0b3597-0xf4-
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ shaft moves in/out good distance from base to shaft center 6 1/2" free shipping in USA for tooling auctions: Lathes may vary in models/years/etc; please be sure you ... moreare bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
ORIGINAL ATLAS 7 3/8" LATHE 3 JAW CHUCK + REVERSIBLE SET OF JAWS. 1 1/2" X 8 TPI IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE ... moreMORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE EVERY PART FOR A 14" ROCKWELL/ DELTA BAND SAW AND NO TIME TO LIST THEM ALL. IF THERE IS SOMETHING YOU NEED PLEASE SEND ME AND E-MAIL AND I'LL GET IT FOR YOU. I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*72%3F7e%3D%3E-13e6d3be192-0xfd-
Nice! 9" South Bend Lathe Electric Motor/ Counter shaft/ Pulley Cover w/ Lubrication Chart Lubrication Chart Number 441-4 This is in very good condition. There are no cracks in the cover. Great for South Bend Lathe restoration project. The dimensions are 27" x 8" x 9" tall Shipping weight 10 lbs because of padding The item is in very good condition. Please email for any questions. All sales are final. Please inspect before you bid.
South Bend 9” and 10K Lathe Headstock Drive Pulley THERE ARE NO BROKEN OR CHIPPED TEETH. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE ... moreMORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE EVERY PART FOR A 14" ROCKWELL/ DELTA BAND SAW AND NO TIME TO LIST THEM ALL. IF THERE IS SOMETHING YOU NEED PLEASE SEND ME AND E-MAIL AND I'LL GET IT FOR YOU. I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR.
Up for bid is nine Carboloy 1/2" c arbide tipped cutters. Some have not been used. All are in great shape.Free shipping to the lower 48 states.
1 HP 3CALL FOR A SHIPPING PRICE TAPER ATTACHMENT 3 JAW CHUCK QUICK CHANGE TOOL HOLER DRILL CHUCK LIVE CENTER HAS INCH AND METRIC DIALS BEDWAYS ARE IN EXCELLENT SHAPE HARDENED BED 3 PHASE 220/440.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13e6dd9fc63-0x102-
Excellent Condition- Original South Bend Lathe Works publication"UNION AGREEMENT 1954- 1956 Between South Bend Lathe Works and United Steelworkers of America Local Union No. 1722" 36 pages. Great collectible piece. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.