In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
199.99
Buy It Now
$18.00 Shipping
Condition: Used
Location: Medina, United States
Up for sale is this South Bend Heavy 10. 10L cross slide compound base. This includes the gib. This came off a school lathe so it does have some wounds. ... morePlease take a look at my other auctions as I will be listing lots of other South Bend parts. I am parting out 2 late model heavy 10 lathes so if there is something specific you need please ask. If you have any questions feel free to email me. I will combine shipping and I will ship international so please ask. Thank you.
$
49.00
Buy It Now
$24.00 Shipping
Condition: Used
Location: Bristol, United States
HARDINGE 5C 5" STEP CHUCK FOR 10 L/13L.
$
69.99
Buy It Now
$18.00 Shipping
Condition: Used
Location: Medina, United States
South bend 9" covers with forward reverse switch, switch is untested.
$
251.27
Buy It Now
Condition: For parts or not working
Location: Middlebury, United States
As pictured Chip Tray only. Will there be a dock or forklift. Size: Length: 87 in. Width: 27 in. Height: 12 in. Prefer to pick it up yourself?. We choose ... morethe carrier. Weight (lbs, oz): 127.
$
260.00
Buy It Now
$18.40 Shipping
Condition: Used
Location: Nashville, United States
$
147.47
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification: Brand new. Made of steel. Suitable for the lathe with center line height Around 0.5" (The top cross slide tool post Mounting Surface to ... morethe lathe center line). Such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10, Nardini TT1000 & TT1200 and many other imported lathe. Package Including:.
$
24.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
South Bend compound Gear 1-8 ratio 86 tooth All teeth are intact as you can see in the photo's. Just clean lube and mount on your lathe It comes with ... morethe bushing. Check my other listings If you need themore change gear parts. I will combine shipping if you order more than one item. This will ship via USPS for $6.50 within the U.S. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144be5b2817-0x10c-
$
29.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
The way wipers are made from hard, die-cut felt which is precisely sized to fit the profile of the lathe bed V-ways or flats. The wipers serve two purposes. ... moreSince every size of South Bend Lathe had different sized ways, every lathe had its own specially designed wiper set that compressed tightly against the way.
$
65.00
Buy It Now
$13.45 Shipping
Condition: Used
Location: Sicklerville, United States
South Bend 14 1/2"-16" Swing Lathe Cross Slide Stop (NEW).
$
18.99
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
Every example I have seen has the small feet under the bed. The countershaft is generally one non-adjustable casting. This isn’t the prefect indicator ... morethough. You should check here to find the year your lathe was made….
$
124.95
Buy It Now
$22.59 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
64.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
SOTTOF SALES Very nice shape. 66T 1 7/8" bore, fits older SB 13" Lathes with a 1 7/8" 8 spindle, please look carefully at the photos and ... morenote the design of the locking pin or bar that engages in the cone pulley and confirm yours is of the same design. Removed from a South Bend 13" Toolroom Lathe with a 5 foot bed, Catalog Number 8113-B, Serial No. 135752, made in approx. 1942. Lathe had a Single Tumbler Quick Change Gear Box and Integral Cast Iron Spindle Bearings, the spindle thread was 1 7/8" 8. D3410.7 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
$
150.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
SOTTOF SALES Very nice shape. 66T 1 7/8" bore, fits older SB 13" Lathes with a 1 7/8" 8 spindle, please look carefully at the photos and ... morenote the design of the locking pin or bar that engages in the cone pulley and confirm yours is of the same design. Removed from a South Bend 13" Toolroom Lathe with a 5 foot bed, Catalog Number 8113-B, Serial No. 135752, made in approx. 1942. Lathe had a Single Tumbler Quick Change Gear Box and Integral Cast Iron Spindle Bearings, the spindle thread was 1 7/8" 8. D3410.7 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
$
189.00
Buy It Now
Free Shipping
Condition: Used
Location: Sterling, United States
Could easily be modified to fit a number of sizes or machines.
$
59.00
Buy It Now
$5.95 Shipping
Condition: New
Location: Delphi, United States
South Bend Heavy 10 thread chasing dial. Our version of the South Bend Heavy 10 thread chasing dial. The dial and the gear can be removed via grub screw ... moreallowing for clocking your dial, cleaning and lube if ever needed.
$
135.00
Buy It Now
Free Shipping
Condition: Used
Location: Sterling, United States
Removed from a complete and operable South Bend Heavy 10" (10L) lathe. Used, in good usable condition. No cracks or broken pieces. No excessive wear.
$
399.99
Buy It Now
Condition: Used
Location: Middlebury, United States
Will there be a dock or forklift. Has A Slight Bend In The Rod (See Pics). Weight (lbs, oz): 150. Size: Length: 36 in. Width: 26 in. Height: 7 in. Unless ... moreotherwise specifically agreed to in writing by.
$
7.85
Buy It Now
$5.35 Shipping
Condition: New
Location: Ionia, United States
These wipers cross reference to the original South Bend part number PT59NK1. Wipers are sold in sets of 4 and are very reasonably priced compared to OEM ... moreor used parts so don’t miss out on a chance to pick up a set for your lathe.
$
21.50
Buy It Now
$5.95 Shipping
Condition: New
Location: Delphi, United States
Our version of the South Bend 9"/10k lathe thread cutting stop. on your South Bend 9"10k lathe. This is our effort to make that available. This tool can ... morebe painted to match your lathe. South Bend 9"/10k Thread Cutting Stop.
$
89.99
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
South Bend 10L Heavy 10 It needs the oiler replaced but they are cheap and easy to find. Thank you for considering to support our family and small business. ... moreWith a household of 8 we cannot express how grateful we are for your business no matter how big or small your contribution is. THANK YOU
$
24.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
Our wipers cross reference to the original South Bend part number PT59R1. Wipers are sold in sets of 8 only (which allows two complete change outs of ... morethe wipers) and they are very reasonably priced compared to OEM or re-used parts so don’t miss out on a chance to pick up a set for your lathe.
$
159.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
If you are contemplating cleaning up that old South Bend Lathe sitting in your garage, this combination kit is what you will need to get the job done. ... moreAs you will notice, this is not a fuzzy Xerox reprint of an older manual that you've probably seen before.
$
179.99
Buy It Now
$14.99 Shipping
Condition: Used
Location: Lombard, United States
Follow Rest For A 10" Metal Lathe. Not sure what lathe it goes to. Has nicks and scratches but is in good condition overall.
$
65.00
Buy It Now
$10.40 Shipping
Condition: Used
Location: Madison, United States
Cross Slide threading stop for a South Bend 16" lathe. Good used condition.
$
98.95
Buy It Now
$15.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
29.95
Buy It Now
$5.25 Shipping
Condition: New
Location: Baltimore, United States
Made in USA.
$
45.00
Buy It Now
$5.00 Shipping
Condition: New
Location: Yorba Linda, United States
THESE ARE LAMINATED BRASS SHIMS ONLY FOR SOUTH BEND 322YB Lathes. THE LAMINATION'S ARE (1) LAYER. 001, (10) LAYERS. 002 BRASS TOTAL THICKNESS IS. 021 ... more+/-. 001. EACH SET INCLUDES (2) FRONT LAMINATED SHIMS AND (2) REAR LAMINATED SHIMS.
$
190.00
Buy It Now
$18.40 Shipping
Condition: Used
Location: Bennington, United States
This is a Tailstock Wrench@ 5 1/4: long-looks mlike 13/16" from a Vintage 9" South Bend Workshop Metal Lathe with a 9" swing and 3 foot ... moreBed. It is Serial#55177 Catalog No. 405-Y. Made by South Bend Engine Lathes In South Bend Indiana USA. The previous owner told me the lathe was from 1937 but I don't have verification of that. It is worn pitted and somewhat rusty with some nicks on the edges but in decent working condition and a neat vintage tool. Local pick-up available. I will combine shipping on multiple purchases when possible.
$
499.99
Buy It Now
Condition: Used
Location: Middlebury, United States
Will there be a dock or forklift. Size: Length: 80 in. Width: 16 in. Height: 17 in. Prefer to pick it up yourself?. To get a freight quote we will need ... moreto know the following We choose the carrier.
$
157.49
Buy It Now
Free Shipping
Condition: Very Good
Location: United States
SOUTH BEND LATHE MAINTENANCE PAMPHLETS: KEEP YOUR LATHE CLEAN, OILING THE LATHE, INSTALLATION AND LEVELING By Charles Philip Crowe *Excellent Condition*.
$
36.50
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
28.95
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
109.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
If you are contemplating cleaning up that old South Bend Lathe sitting in your garage, this combination kit is what you will need to get the job done. ... moreAs you will notice, this is not a fuzzy Xerox reprint of an older manual that you've probably seen before.
$
50.00
Buy It Now
$10.15 Shipping
Condition: New
Location: Berrien Springs, United States
ATLAS CRAFTSMAN 9-12 INCH LATHE 3C COLLET SET WITH NEW DRAWTUBE+USED ADAPTER Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge ATLAS ... moreCRAFTSMAN 9-12 INCH LATHES 3C COLLET SET WITH 6 USA COLLETS AND ADAPTER WITH NEW USA MADE DRAWTUBE. 1/16. 1/8, 3/16, 5/16, 3/8 AND 7/16 ASS ORTED USA COLLETS. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13f2190db89-0xe1-
$
115.00
Buy It Now
$15.00 Shipping
Condition: Used
Location: Heyworth, United States
This is an 8-position'stop' for lathe. Mill or grinder etc. I believe it's from a Hardinge lathe. Great quality and condition. It rotates ... moreand clicks into position nicely. Could be used on many different machines. Dimensions are shown in the pictures. Don't miss this as it includes super-fast FREE priority mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
$
32.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
The way wipers are made from hard, die-cut felt which is precisely sized to fit the profile of the lathe bed V-ways or flats. The wipers serve two purposes. ... moreSince every size of South Bend Lathe had different sized ways, every lathe had its own specially designed wiper set that compressed tightly against the way.
$
328.50
Buy It Now
Free Shipping
Condition: Used
Location: Sterling, United States
Gearbox removed from a complete and running South Bend 13" lathe. This was taken from an operable lathe and is complete minus the top lever and gear off ... moreend shaft. Internals of gearbox are complete and operable. No excessive wear or damage. Comes exactly as shown and ships free to continental USA. Buyers outside continental USA please message prior to purchase for shipping quote.
$
374.95
Buy It Now
$21.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
40.54
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
New Steady Rest Jaws / Fingers with Roller Bearings for South Bend 9" & 10K & Heavy 10" Lathes and Logan 10" & 11" Lathes. Replaces South Bend part PT128NR1 ... moreand Logan parts LP-2417 & AC-192. Part Number BZ-73.
$
39.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
This steady rest jaws set is a must-have for any metal lathe enthusiast. Designed for use with South Bend Lathe 9" and 10", Logan 11", and other metalworking ... morelathes, these jaws/fingers with bearings provide exceptional grip and support for workpieces of all shapes and sizes. With a total weight of just 8.9 ounces, this set is both lightweight and durable, making it perfect for long hours of use. Whether you're a professional machinist or a hobbyist, this steady rest jaws set is sure to make your lathe work smoother and more precise.
$
78.95
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
139.99
Buy It Now
$19.95 Shipping
Condition: Used
Location: Berlin, United States
South Bend Lathe 9 inch and 10K. Idler bolt assembly. Includes the bolt. Bushing, washer and nut. Some wear but in good condition. See photos Free shipping ... moreto any of the US 50 States. I will not ship outside the US 50 States. Payment to be by Pay Pal.
$
24.95
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
18.49
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
NICE ORIGINAL COMPUND REST TOP GIB AND SCREWS FOR A SOUTH BEND 9" 10K METAL LATHE. GIB PART NUMBER PT257NK1. WILL ALWAYS COMBINE SHIPPING. ANY QUESTIONS ... morePLEASE FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
283.50
Buy It Now
Free Shipping
Condition: Used
Location: Sterling, United States
Removed from a complete and running 16" South Bend lathe. This quick change gear box is used but in good usable condition and came off a running machine. ... moreIt has some paint scuffing and a few scratches here and there but overall a nice usable gearbox ready to mount and use. Ships free to the CONTINENTAL USA. Buyers outside continental USA please message prior to purchase for shipping quote.
$
18.95
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
The shaft has wear. It’s almost impossible to find these without any. The wear is roughy .0015Thank you for considering to support our family and small ... morebusiness. Words cannot express how grateful we are for your business no matter how big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
80.10
Buy It Now
Free Shipping
Condition: Used
Location: Sterling, United States
Removed from a complete and running South Bend Model 9C lathe. Used but in good usable condition. Came off a good running lathe. No cracks or repairs. ... moreNo broken teeth on gear. Comes as shown and ships free anywhere in USA.
$
44.00
Buy It Now
$6.75 Shipping
Condition: New
Location: Ionia, United States
South Bend 9" Threading Dial Thread Dial 3D Printed NEW. If you need a custom made thread dial for your lathe, let us know as we can produce what you ... moreneed. We can also print parts for any thread dial you need repaired (gears, housings, dials, etc).
$
42.18
Buy It Now
Free Shipping
Condition: New
Location: United States
Click here to see description.
$
129.99
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
South Bend 9 Junior Lathe Compound Casting W/Gibb. FREE SHIPPING TO THE LOWER 48 UNITED STATES
$
18.95
Buy It Now
$6.80 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
145.00
Buy It Now
$54.00 Shipping
Condition: Used
Location: Granger, United States
The spindle clamp locks down tightly and it is complete with bed clamp and bolt. South Bend Heavy 10.
$
600.00
Buy It Now
$24.75 Shipping
Condition: New
Location: Nashville, United States
There are not many of these left in the world.
$
19.98
Buy It Now
$5.35 Shipping
Condition: New
Location: Ionia, United States
Red in color - the red color will really dress up your lathe! These wipers cross reference to the original South Bend part number PT59R1. Wipers are sold ... morein sets of 4 and are very reasonably priced compared to OEM or used parts so don’t miss out on a chance to pick up a set for your lathe.
$
8.95
Buy It Now
$6.80 Shipping
Condition: Used
Location: North Tonawanda, United States
( depends on your device ).
$
179.99
Buy It Now
$8.74 Shipping
Condition: Used
Location: Portland, United States
This threading dial is super clean. There is light wear from storage but does not seem to be used very much. Really nice. I count 24 teeth on it. 
$
198.95
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
I was messaged buy another seller and they said this is for sure off and early south bend 9” lathe
$
50.00
Buy It Now
Free Shipping
Condition: New
Location: Ionia, United States
Fits South Bend 10L. South Bend Chart No. 1. Anodized Aluminum. Black printed on quality.
$
17.50
Buy It Now
Free Shipping
Condition: New
Location: Hagerstown, United States
Handy Little Lathe Chart for the. Using one chart, you can easily find the correct tool cutting angles and the proper cutting speeds for any of 22 different ... morematerials. HANDY LITTLE LATHE CHART – SPECIFICATIONS and USES.
$
18.97
Buy It Now
$3.97 Shipping
Condition: Used
Location: Houston, United States
1920 South Bend Lathe Manual No. 3 - First.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
 In 

Former Listings  
 
C. E. JOHANSSON FORD MACHINIST GAGE BLOCK SET SOUTH BEND LOGAN ATLAS LATHE MILL
LOTS OF AUCTIONS ONLINE NOW! Brand C.E. Johansson Packaging In Original Box Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 4" to 0.1001" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
FURNAS LATHE DRUM SWITCH ATLAS CRAFTSMAN SOUTH BEND LOGAN ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Furnas Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* In working order when removed. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
3 JAW LATHE CHUCK 4" DIA. 1 1/2" x 8 TPI ATLAS CRAFTSMAN SOUTH BEND LOGAN ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Unknown Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Chuck jaws have been profiled. No key. Threads have some wear but it does screw all the way on. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. ... moref3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f120605eb-0x109-
Vintage 1954 SOUTH BEND LATHE WORKS How to Run a Metal Working Shaper ORIGINAL
Vintage 1954 SOUTH BEND LATHE WORKS"How to Run a Metal Working Shaper" ORIGINAL BOOK from South Bend. This 24-page book is in excellent condition. Original owner's name on front cover. Reprints of this book are selling for big dollars on ebay.this one is the original 1954 edition.
1½" X 8TPI X 5" diameter South Bend lathe dog-driver faceplate
Shipping to USA only. No charge for pick up in Vista CA 92083 This auction is for the South Bend lathe dog-driver faceplate shown in the photos below. Fits onto any 1½#8tpi spindle. Thanks for looking!
South bend lathe switch support/conduit
Nice original equipment south bend lathe switch support/conduit. It is difficult to find the name for this actual part.The mounting plate reads"501-R4-1" with"SM" underneath. Some adapting may be required depending on the switch you use. I know it fits my Southbend 14-16. Feel free to ask any questions regarding sizes and bolt patterns. Thanks for looking! Hans.
ATLAS,SOUTH BEND LATHE ARMATURE CHUCK SET JACOBS No.75 CHUCK AND No.100 CENTER
LISTING IS FOR A JACOBS CHUCK SET. IT IS AN ARMATURE SET THAT INCLUDES CHUCK No. 75 AND CENTER REST No.100 THESE ARE LIKE NEW AND SHOW LITTLE SIGNS OF WEAR/USE OTHER THAN A LITTLE SURFACE RUST. THEY HAVE A 1/4in TO 3/4in CAPACITY AND INCLUDE THE CHUCK KEY AND A CASE WITH THE SET. THANKS FOR LOOKING AND PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS.
ATLAS,SOUTH BEND LATHE HEADSTOCK DRILL CHUCK, 1 1/2X8TPI JACOBS No.58B, W/KEY
LISTING IS FOR A JACOBS CHUCK THAT THREADS ON TO THE SPINDLE NOSE OF VARIOUS MANUFACTURERS OF LATHES. THE THREAD IS A 1 1/2in x 8 tpi INTERNAL THREAD THAT THREADS TO THE SPINDLE NOSE OF MANY ATLAS. SOUTH BEND AND OTHER VINTAGE LATHES OF THAT ERA. JACOBS MODEL#58 B IT HAS A 1/8in TO 5/8in CAPACITY AND IT INCLUDES THE CHUCK KEY. THREADS ON EASILY AND SECURE AND SHOWS LITTLE SIGNS OF WEAR/USE OTHER THAN A LITTLE SURFACE RUST. THANKS FOR LOOKING AND PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f139820bd-0x107-
Apron carriage rack and pinion hand wheel handwheel from 9" South Bend Lathe
Nice. Clean apron hand wheel from a 9" South Bend Workshop model lathe. Comes as pictured. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote! I will be listing many more parts from this South Bend lathe. If you need something. Let me know!
Half Nut Bolt Stud from 9" South Bend Lathe
Nice half nut bolt/stud and nut from a 9" South Bend Workshop model lathe. Comes as pictured. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote! I will be listing many more parts from this South Bend lathe. If you need something. Let me know!
Carriage Saddle Lock Clamp Stop from 9" South Bend Lathe
Saddle clamp from a 9" South Bend Workshop model lathe. Comes as pictured. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote! I will be listing many more parts from this South Bend lathe. If you need something. Let me know!
South Bend 9" , 10K Lathe Change Gear. 5/8" Bore 32 Tooth
South Bend 9" 10K Lathe Change Gear- 5/8" bore. 32 Tooth. Great condition. No b roken or chipped teeth. Please see my other listings for more lathe parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
South Bend 9" Model C Lathe EXCELLENT SHAPE Lead Screw & Both Support Bearing
Description: Here's a South Bend 9" Model C Metal Lathe Lead Screw in excellent shape. Came off a 3' bed and is 39 1/4" long with the diameter being 3/4" and includes both matching leadscrew support bearing. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give ... morethe buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
Heavy Duty Boring Bar and Holder for Lathe,Logan,South Bend,Craftsman,Atlas,Enco
Heavy Duty Shop Built Boring Bar and Holder for Lathe Block is 4 3/8" x 2 11/16" x 1 1/2" thick. Bar is 1" OD and 8 1/8" long with 1/4" tool capacity. T-nut is 1 3/8" bottom width and 15/16" top width and 2 11/16" long. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Pair of MACHINIST "V" BLOCKS for Atlas Craftsman South Bend Logan lathe mill
This listing is for a pair of machinst"V" blocks. They measure 2 X 2 3/4 X 3" Come with one clamp and bolt. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
WILLIAMS STRAIGHT TOOL HOLDER for Atlas Craftsman South Bend Logan lathe
This listing is for a Williams straight tool holder 0-SH. It is 3/8" X 3/4" and holds a 1/4" bit. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
1936 French Ad Print South Bend Lathe Works US Tools Lathe
South Bend Lathe Works US Tools Lathe Magazine Ad Description Original Magazine Print/ Advertisement Artist: Year publishing: 1936 Magazine: Guide des Importateurs(FR) Approximate overall Size(cm) 18.5 x 13 Approximate overall Size(inches) 7.28 x 5.12 Printed on the reverse: Yes Quality: The Ad is in very good condition. No tears. No creases, no water traces. Note: This is a single original print from a period magazine. Click to view supersized image One of a Kind Piece of the Past You are to buy a rare. Maybe unique item, unlikely to be seen elsewhere. In our store you will find antique Art prints. V intage Advertisements. P rinted P hoto images. Articles, Publications and other Print Ephemera. Mainly from the years 1880 up to 1960’s. With currently about 4500 items and more to come each month you have a great chance to find what you need. ... moreAll items are Original prints. Taken from period magazines, newspapers, almanacs, other periodicals or unique publications. They are not modern reproductions or digital copies. Most of them are older than two generations and hardly more than a few examples survived through the years. Many of them bear more or less the signs of the time. Some aging, foxing, handling wear, natural paper structure changing and wrinkling. You will find all necessary information in the item description. The images enclosed are with fine details and clearly visible eventual faults and/or defects. Allowing making you r own judgment. It may happen however. That the item you bought is not what you need, is not what you have expected or just you don’t like it. Don’t worry! We offer full money-back guarantee. We consider each case with great attention– just let us know and we shall find the best solution for both sides. We are aware of postal services“top speed” be sure. In case of return longer period will be agreed. If you consider that our price is too high you are welcome to send us your offer. Please note. That" Free shipping" doesn't mean that we do not have any handling and shippin
WILLIAMS CUT-OFF TOOL 31-R for Atlas Craftsman South Bend Logan lathe
This listing is for a Williams cut-off tool 31-R. It has been machined to 3/8" X 1 1/4" Comes with cut-off blade. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
#2MT TURRET ATTACHMENT for Atlas Craftsman South Bend Logan lathe tailstock
This listing is for a#2MT turret attachment. It spins nicely. Comes with a 1/2" drill chuck. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f172087bb-0x107-
6" Chuck Back Plate Machined 2 1/4" X 8 TPI South Bend Logan 11" Lathe
6" Chuck Back Plate 2 1/4" X 8 TPI May fit South Bend Heavy 10 or Logan 11" Lathe if they have a 2 1/4 x 8 spindle. Has 4 1/2" holes 3 1/4" center to center. Also has 2 one half holes straight across 5" center to center. Total thickness with hub is 1 1/4" 5/8 hub and 5/8 thick plate. The 4 holes are counterbored for bolt/ allen bolt heads 3/4" diameter x 1/4" deep. Thanks for looking.
Cross Slide South Bend Jewelers Lathe Mill Drill Milling Machine ? Small Vintage
Vintage South Bend Cross Slide as shown in photos. Measures about 8 7/8" x 4" x 1 1/2" and weighs 11 pounds. Not sure what type of machine it was used on. Last 2 photos show stampings on the side. Has some areas of light surface rust but still functional and could be cleaned up better. Lower plate has a couple of 1/4" counter bored holes and other tapped holes for mounting. see photos) Upper plate has(8) 1/2" diameter holes drilled parallel to the slide, which are used with removeable 1/2" diameter pins with 1/4" taped holes used for hold downs. 1/4" wide slots are milled into these holes. There appears to be about.010 of backlash in the turn handle, which is probably normal for these old cross slides. Slide moves freely but I also don't notice any looseness in the gibs.
Engine Lathe South Bend 10 X 24"
This pretty little South Bend Lathe runs on 110 Volts and wired to plug into a standard receptacle. It features a DC spindle motor and Drive so that you are able to get a pretty good response running this unit with 110 volts. There are different range selections in running the unit as well. We stock plenty of tooling if you need to purchase some. It does come with the current chuck installed.
Jacobs # 32 Drill Chuck 0-3/8 for South Bend lathe # 2 Morse Taper
Jacobs Drill Chuck# 32 Capacity 0-3/8# 2 Morse Taper Opens/Closes Very Smoothly. Perfect for Little South Bend lathe No Chuck key 3B Any Questions Call and Ask for Dave Phone Number Two One Five-Three Four Three- Thirty Nine Sixty Six. No Calls after 8 PM. Eastern Time
Jacobs # 34 Drill Chuck 0-1/2 for South Bend lathe # 2 Morse Taper
Jacobs Drill Chuck# 34 Capacity 0-1/2# 2 Morse Taper Opens/Closes Very Smoothly. Perfect for Little South Bend lathe No Chuck key 2B Any Questions Call and Ask for Dave Phone Number Two One Five-Three Four Three- Thirty Nine Sixty Six. No Calls after 8 PM. Eastern Time
South Bend Lathe Gear Change Bracket Banjo 9 inch Model B C
South Bend Lathe 9 inch Gear Change Bracket( Banjo) For 9 inch SB Models B and C. In very good condition. See photos Free shipping to any of the US 50 States. I will not ship outside the US 50 States. Payment to be by Pay Pal.
Jacobs # 36 Drill Chuck 3/16 - 3/4 for South Bend lathe # 3 Morse Taper
Jacobs Drill Chuck# 36 Capacity 0-3/8# 3 Morse Taper Opens/Closes Very Smoothly. Perfect for Little South Bend lathe No Chuck key 3D Any Questions Call and Ask for Dave Phone Number Two One Five-Three Four Three- Thirty Nine Sixty Six. No Calls after 8 PM. Eastern Time
ORIGINAL ATLAS CRAFTSMAN MT2 CROTCH CENTER TOOL MACHINIST METAL LATHE SOUTH BEND
Here we have a nice used crotch center in#2 Morse Taper. The only negative I can find is a ding on the small diameter of the MT shank. That little section will not be in contact with the tailstick sleeve ID. Probably put there at removal of crotch center from tailstock. Was in the original box when I got it at the swap meet. The large end is 1 5/8" dia. Sears part# 9 21142 and so stamped on the crotch center. Appears to have very limited use. Sales and shipping to lower 48 states only. Thanks for looking.
LIVE CENTER with # 2 Morse Taper Perfect for South Bend Lathe
LIVE CENTER with# 2 Morse Taper Made in USA. Perfect for South Bend Lathe Location 1C Any Questions Call and Ask for Dave Phone Number Two One Five-Three Four Three- Thirty Nine Sixty Six. No Calls after 8 PM. Eastern Time
MT2 LIVE CENTER TOOL 4 ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
Live center with MT2 shank. Shank is 3" long. Some light marks noted. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOT OF 8 GEARS LATHE MILL 1" BORE 32 44 48 56 64 72 86 100 TOOTH SOUTH BEND
This auction is for 8 vintage gears and wood case. Brand unknown, may fit lathe or mill. 32. 44, 48, 56, 64, 72, 86 and 100 tooth. 2 3/8" 3 1/4" 3 9/16" 4 1/8" 4 11/16" 5 1/4" 6 1/4" and 7 1/4" diameters. All are 1" bore with 1/4" keyway. Thickness at center hub portion is 11/16" Thickness at toothed portion is 21/32" All are in very good condition. Have some scratches etc. Email if you have any questions before you bid. Buyer pays $24.00 for shipping with delivery confirmation. Check my other auctions for more parts. Tools and other stuff. Paypal is the only type of payment accepted. Due to eBay rules. Payment is expected within 7 days of auctions end. This item as with all equipment is being sold as is. With no returns and all sales are final. Thanks for checking out my auctions.
SOUTH BEND LATHE HEAVY 10" BACK GEAR EXCELLENT CONDITION
SOUTH BEND LATHE HEAVY 10" BACK GEAR EXCELLENT CONDITION AND READY TO USE.SEE PHOTO’S Best Describes the Item up for Auction. Buyer pays S&H.US Buyers If you have any questions or concerns please email me before bidding at Winning bidder to pay within 3days of close of auction. Good luck bidding. Auction. I will combine shipping on auctions to save on shipping costs. Note to all buyers I am not a expert on this item please ask questions I answers all questions email to me right up to 4 hour before auction ends. Also I expect email contact from buyer within three days Once you receive your item. Please remember to leave feedback. If you have any questions or problems, please email me so we can resolve the issue. Negative feedback does not solve the problem, communication does. I am committed to give the best customer service possible. ... moreLOCAL PICKUPs ARE OK) Powered by The free listing tool. List your items fast and easy and manage your active items.
South Bend 9" Metal Lathe Set of 2 Headstock Gear Guards with Mounting Screws
The following auction is for a South Bend 9" Metal Lathe Set of 2 Headstock Gear Guards with Mounting Screws They are in fine condition with some surface wear and some small pitting. The guards come with the mounting screws. O ff of a South Bend 9" Metal Lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 12.0 0 for USPS Priority Mail Shipping with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions.
DAYTON 1/2 HP Capacitor Start Power Tool LATHE MOTOR Logan Atlas South Bend
Very Good condition Dual Shaft 1725 RPM. 56 Frame 5/8" Diameter 2 1/8" long on one side and 2" long on the pulley side. Great for working a lathe in both directions What you see in the pictures is what is up for auction. I will combine winning auctions to save you $$$ on shipping. I do not overcharge on shipping. You will not be disappointed. Please check the pics Please ask me and I will try and answer any of your questions Please check my other auctions. Bid now because you do not want to miss this deal. Good Luck and check my other auctions. I only charge Actual costs for shipping. Please check my Excellent Rating. Buy with confidence. If you have questions. Please email me. If you have questions. Please email me. High Bidder to pay shipping and insurance if you want it. Please allow time for personal check to clear or send ... moreM.O. for quick shipping. Just a note to all my bidders: I really try to give an accurate description and offer you great items. But, sometimes our interpretation of Excellent or Very Good differ. So, I really suggest you email me with your questions. to make sure we are all on the same page. But, once in a while, someone simply would like a refund. No Problem, I absolutely guarantee my items and you always may have 5 days after you get your item to email me for a refund. But, I want to let you know before you bid, I deduct from your refund: My postage costs The fees the auction page charges me It takes a lot of effort and time to post items.When an item is returned, all that work must be repeated. Sincerely, deducting the actual costs is not meant as a penalty. it actually costs me more. As much as I'd like to be like Wal-Mart, I cannot. With that knowledge, I hope you feel comfortable bidding and winning! May the best bidder win! Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
SOUTH BEND LATHE 9" 72/18 GEAR,BUSHING AND BOLT
THIS IS 72/18 TOOTH COMBO GEAR FOR THE 9" SOUTH BEND LATHES IN GOOD CONDITION WITH NO MISSING TEETH. IT COMES WITH THE BUSHING AND MOUNTING BOLT AND NUT. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
16" SOUTH BEND LATHE HEADSTOCK THREADED
COMPLETE IN GOOD SHAPE WITH GOOD BEARINGS
16" SOUTH BEND LATHE CARRAIGE SADDLE COMPOND
COMPLETE IN GOOD SHAPE HAS INCH DIALS
13" SOUTH BEND LATHE HEADSTOCK D-1-4 SPINDLE
COMPLETE IN GOOD SHAPE FROM A LATE MODEL 13" MACHINE D-1-4 CAM LOCK SPINDLE
13" South Bend Lathe Carraige STOP
ORIGINAL SOUTH BEND MCS-102 ra STAMP IN THE CASTING
Drill Bit 11/16 Reduced Shank for Machinist South Bend Lathe 9 10 Mill Press CNC
One used TRW Drill Bit 11/16" with 1/2" shank. 3 1/4" drill length, 6" OAL I have several more taper shank and reduced shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. But please let me know if you are bidding on multiple items, and if you win multiple items wait till I send an invoice to reflect correct shipping. I accept PayPal only. I do not ship outside the USA. Thanks for looking. Normal 0 false false false EN-US X-NONE X-NONE
VERY NICE ORIGINAL SOUTH BEND 9 10K LATHE BACK GEAR ECCENTRIC SHAFT & PINS
Very Nice- Original back gear eccentric shaft and taper pins for a 9" or 10K South Bend lathe. Shaft is 3/4" diameter. 9 1/4" long. All in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
20 Cobalt Alloy HSS 1/2" Lathe Tool Bits Machinist Lot Gunsmith South Bend Atlas
Ebay Base This auction is for 20 Cobalt alloy HSS lathe bits in 1/2" shank. These Super high quality bits are made by Crucible. Cleveland Twist Drill, Chicago-Latrobe, Bethlehem, Firth Sterling and Vanadium Alloys. All bits have custom cutting profiles ground into them, some on both ends. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. The pictures show different views of the same items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
Drill Bit 31/32 Reduced Shank for Machinist South Bend Lathe 9 10 Mill Press CNC
One used USA Drill Bit 31/32" with 1/2" shank and 3 flats for gripping. 3 1/4" drill length, 6" OAL I have several more taper shank and reduced shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. But please let me know if you are bidding on multiple items, and if you win multiple items wait till I send an invoice to reflect correct shipping. I accept PayPal only. I do not ship outside the USA. Thanks for looking. Normal 0 false false false EN-US X-NONE X-NONE a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13f242e954b-0xec-
SOUTH BEND LATHE CATALOG(1937) & PRATT & WHITNEY 1927 MILLING & LATHES
A VERY NICE VINTAGE"RARE" 1937 SOUTH BEND LATHE CATALOG 96 IN GREAT SHAPE NICE PICTURES AND ORDER FORM AND MORE 1937 MODEL STREAMLINED SOUTH BEND LATHES BACK-GEARED. SCREW CUTTING, PRECISION 425 EAST MADISON STREET, SOUTH BEND INDIANA PLUS RIVETT 608 LATHE& GRINDER, INC CATALOG FROM 1938 PLUS GOOD USED BOOK FROM 1937 HOW TO RUN A LATHE PLUS SEVERAL BROCHURES AND SOME PAGES FROM PRATT AND WHITNEY COMPANY DATED 1927 MILLING MACHINES/ LATHES! NO MILDEW SMELL BOTH KEPT WELL! ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f2507844c-0x105-
South bend lathe 14-1/2" , 16" and 16/24 tray (tool)
Here's the tray or tool tray that sits on top of the gear box. Clean/ no cracks. any questions feel free to ask. Posted with
SOUTH BEND LATHE 9-10K CHANGE GEAR LOT 14 PCS 32-92 TOOTH GEARS GOOD USED
SOUTH BEND LATHE 9-10K CHANGE GEAR LOT 14 PCS 32-92 TOOTH GEARS GOOD USED Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge 14 PIECE CHANGE GEAR LOT CAME FROM A SOUTH BEND 9 INCH LATHE. 92T. 80T, 72T, 2) 64T, 60T, 56T, 52T, 48T, 46T, 44T, 40T, 2) 32T. ALL ARE 5/8 BORE AND KEY EXCEPT ONE 64T AND ONE 32T GEARS ARE 1/2 BORE AND KEY. GOOD USED SHAPE. THANKS, AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
Tailstock Wrench for 14"-15" South Bend Lathe 1-1/16"
Tailstock Wrench for 14"15" South Bend Lathe South Bend 14"15" Metal Lathe Tailstock Wrench for a 1-1/16" Nut. Solid with no breaks or repairs.
South bend lathe 13 inch head stock round with bearings and bushings D1 camlock
This is a head stock for a 13 inch south bend lathe. Includes bearings and bushings. SOld as is, buyer pays shipping, payment due within 7 days. This is the better headstock, D1 camlock type Posted with On May-04-13 at 10:52:21 PDT. Seller added the following information: Can lock area looks good see updated pictures. C2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13f26cf92de-0xf1-
SOUTH BEND 9" and 10"LATHE 3C COLLET DRAW BAR
SOUTH BEND 9" and 10"LATHE 3C COLLET DRAW BAR SOUTH BEND 9" and 10"LATHE 3C COLLET DRAW BAR YOU ARE BIDDING ON USED IN GOOD CONDITION SOUTH BEND 9" and 10"LATHE 3C COLLET DRAW BAR PLEASE SEE PICTURES All purchases are expected to be made within 72 hours of close of the auction or will be CONSIDERED for relisting or offered to next highest bidder. So please have your finances in order. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Orders above 149 lbs. must be shipped via freight carrier.We are giving you the chipest freight quote.All estimates are subject to change depending upon drop-off location. Carriers will assess an extra charge if delivery is made to a residential area and/or if the services of a lift gate are required. ... moreThe buyer has 7 days to return the item(the buyer pays shipping fees) The item will be refunded. All e-mails will be responded within 12-24 Hours. You may e-mail us anytime Please visit my store.
Lantern Tool Post, for 10" Lathe (or larger) South Bend Logan Atlas Craftsman
This lantern-style lathe tool post comes with two(2) rockers(both are JH Williams No. 5) One is smooth on top; the other is not. The bas size is 1-1/2" x 1-1/2" x 3/8' The post is 1" diameter x 3-5/16" high without the screw. The opening in the post itself is 1/2" wide x 2-1/8" long. The screw itself is 2-5/8" long. it has a 7/16" x 7/16" square drive end with 1/2" thread x 1-13/16" long and it turns smooth and free. There are no personal names or any ID inscribed anywhere.
ORIGINAL ALMOND NO 342 DRILL CHUCK FOR ATLAS CRAFTSMAN SOUTH BEND LATHE
ORIGINAL ALMOND NO 342 DRILL CHUCK FOR ATLAS. CRAFTSMAN OR SOUTH BEND LATHE. WRITTEN ON CHUCK READS"ALMOND SIMPLIFIED CHUCK NO-342. CAPACITY LOOKS TO BE ABOUT 3/8" CHUCK HAS SEEN SOME WORK TIME AND HAS SOME DINGS. COMES WITH KEY. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13f27832ea9-0xf1-
Jacobs Drill Chuck Arbor 2 Morse Taper for Machinist Lathe South Bend 9 10K
One used Jacobs drill chuck arbor. 2 Jacobs taper to#2 Morse taper. Item in the picture is the one you will receive. I do combine shipping. But please let me know if you are bidding on multiple items, and if you win multiple items wait till I send an invoice to reflect correct shipping. I accept PayPal only. I do not ship outside the USA. Thanks for looking. Normal 0 false false false EN-US X-NONE X-NONE ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13f28759255-0xfb-
SOUTH BEND 13 METAL LATHE COUNTERSHAFT JACK SHAFT PARTS
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ good condition Height from base to hole center is 6" was with south bend 13 lathe for tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding ... moreon the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
BOOK - HOW TO RUN A LATHE by SOUTH BEND 1954 MACHINIST TOOLS METAL WORKING *1
BOOK- HOW TO RUN A LATHE by SOUTH BEND 1954 MACHINIST TOOLS METAL WORKING*1 Condition/I n fo: This book is FILLED with excellent photographs and illustrations. One of the better ones I have seen for learning how to operate a lathe The scale/rule in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to ... moresend you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
Vintage South Bend 9 Inch Workshop Precision Lathe original parts list brochure
Free shipping.ONLY when listed for free shipping,applies to 48 continental United States only,ask for quote if anywhere else.All items will be shipped out promptly(within the day Monday through Friday,not including holidays) and with care.All questions will be answered ASAP.I ship USPS only. Paypal charges 10% on shipping and paypal charges 3% plus 3% currency conversion fees for international currency.This does not include packing,boxes,transportation to post office.We keep shipping as low as possible.If shipping seems high talk to ebay and paypal about charging fees on shipping.All international sales require a $15 registered mail charge on top of shipping charges if it does not already have tracking. All items must be paid in the first 2 days or unpaid item procedures wil be followed.A bid equals a commitment and contract so if you do ... morenot pay I will NOT cancel the tranasction and WILL use ebay procedures to leave an ebay strike. I am not responsible for postal damage or loss,insurance may be available upon request,if there is damage open it in front of the postal employees and report the damage to them or refuse the package, so no refunds for this.If a return is authorized by me or other means you must ship the item back in original packing at your cost. Grading of item"New" is unused, Mint" maybe used once but like new, Excellent" has some minor use but great shape,Fine is in normal used shape,no damage to speak of other than regular useage wear, Very good" has some lite dirt,lite wear,maybe a crease or two. Good" has normal useage wear with some dirt,possible creasing and maybe writing but quite readable and a chip depending on item. Fair" Has dirt,a lot of wear,creasing,chips,missing parts, and will need restoration. poor" has major wear and pages loose,dirty,missing,missing pieces and sold for rarity or for parts.Untested" means untested,sold for parts or repair but may work. By buying this item you agree to these rules Powered by The free listing tool. List you
South Bend 9" Metal Lathe Forward / Reverse Tumbler Lever with 3 Gears
South Bend 9" Metal Lathe Forward/ Reverse Tumbler Lever with 3 Gears It is in fine condition with some wear. Everything works fine. It comes with three gears as shown in pictures. The gear teeth are in fine condition with some wear. It is sol d as pictured. It is off of a South Bend 9 inch metal lathe. Please e-mail me with any questions or for additional pictures. Winning bidder pays $13.00 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
Lathe Wrench, 3/8" Square, South Bend Logan Atlas Clausing Craftsman
There is an"A inside-a-triangle" symbol on one side of the handle and"No. 8" on the other side. Not sure of the brand name. The handle itself is 3-13/16" long and has a maximum width of 11/16" at the end. There is a 3/8" x 3/8" square opening on one side for the tool post screw and 9/16" diameter opening on the other side with 1/4" x 3/16" slot. This end of the wrench is 3/4" wide. There are no personal names inscribed anywhere.
1942 South Bend Lathe Works "How To Run A Lathe" Machinists Instruction Manual
Paper cover. 5 x 8 inches, 128 pages, illustrated. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f2b423d80-0x104-
BISON 6 INCH 3 JAW SELF CENTERING CHUCK+KEY ATLAS CRAFTSMAN SOUTH BEND LATHE
BISON 6 INCH 3 JAW SELF CENTERING CHUCK+KEY ATLAS CRAFTSMAN SOUTH BEND LATHE Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge FINE USED BISON 6 INCH 3 JAW SELF CENTERING HEAVY DUTY LATHE CHUCK WITH KEY AND 1 1/2-8 MOUNT. WEIGHS 25 POUNDS BEFORE SHIPPING. WILL FITS MANY ATLAS. CRAFTSMAN, SOUTH BEND, AND LOGAN MACHINES. WITH BOLT ON REVERSIBLE JAWS. THANKS, AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
CRAFTSMAN,ATLAS,SOUTH BEND LATHE CHUCK,3 JAW,5inch CRAFTSMAN CHUCK#462,383 22980
LISTING IS FOR A 3 JAW CHUCK THAT HAS A 1 1/2in X 8tpi THREADED MOUNT ALONG WITH A FLAT FOR TIGHTENING THAT IS 2 1/4in. THIS THREAD IS USED ON THE NOSE OF VARIOUS ATLAS.CRAFTSMAN AND SOUTH BEND LATHES ALONG WITH OTHERS MANUFACTURED IN THAT ERA. JAWS SCROLL PROPERLY AND GRIP AS THEY SHOULD. CHUCK IS IN GOOD OVERALL SHAPE BUT DOES HAVE SOME WEAR MARKS ON JAWS ALONG WITH SOME SURFACE RUST. THANKS FOR LOOKING AND PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS.
SOUTH BEND,HARDINGE, LATHE 4-JAW CHUCK,1 1/2inX8tpi MOUNT, 8in CHUCK, NICE SHAPE
LISTING IS FOR A 4 JAW CHUCK THAT HAS A 1 1/2in X 8tpi THREADED MOUNT. THIS THREAD IS USED ON THE NOSE OF VARIOUS ATLAS AND SOUTH BEND LATHES ALONG WITH OTHERS MANUFACTURED IN THAT ERA. THIS LATHE CHUCK IS VERY HEAVY DUTY AND WEIGHS ABOUT 25lbs OR MORE. WOULD BE BEST SUITED ON A LARGER LATHE LIKE A SOUTH BEND OR A HARDINGE. BUT DOES HAVE A 1 1/2 X 8 tpi THREADED ADAPTER. THIS IS AN INDEPENDENT ADJUSTABLE JAW CHUCK. ALL JAWS SCROLL INDEPENDENTLY. CHUCK IS IN GOOD OVERALL SHAPE OTHER THAN SOME SURFACE RUST. THANKS FOR LOOKING AND PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13f2be4004a-0xf4-
SOUTH BEND Lathe #253 Original 3/8" TOOL POST WRENCH -fits ATLAS, CRAFTSMAN, etc
3/8" TOOL POST WRENCH- PLEASE SCROLL DOWN TO SEE PHOTOS- Original equipment tool post wrench in fair to good used condition. Overall length is approximately 4 inches. Has a 3/8" open end and a 3/8" square opening. Marked: SOUTH BEND LATHE and No. 253. Used condition(see photos below) Minor dings. Scuffs and scratches. A little visible wear on the edge of the square opening, the open end is fairly crisp. Very light dirt& stains. No rust. No owner's markings, no significant damage. Ready to use! Please check my other auctions for more good quality tools- I will combine packaging to conserve shipping costs. Careful packing and fast shipping in the U.S. for 1 dollar. International delivery at actual cost. NO RESERVE! I do not end auctions early. Most of my items are"used" Usually offered as-found. Some items are ... morefrom collections, some have been cleaned. No unhappy surprises here- I try to describe all significant damage. Flaws, previous owners markings, etc. You will not be overcharged for shipping. Whenever possible. Multiple purchases will be shipped together and you will only pay the shipping cost of one item. Items will be carefully packed and shipped quickly. If you do not like the item. You may return it(in the same condition as received) for a full refund. If returning due to a problem that I missed, I will pay for the return shipping. SATISFACTION GUARANTEED! Powered by The free listing tool. List your items fast and easy and manage your active items.
ORIGINAL MT2 ALMOND NO 342 DRILL CHUCK FOR ATLAS CRAFTSMAN SOUTH BEND LATHE
ORIGINAL MT2 ALMOND NO 342 DRILL CHUCK FOR ATLAS. CRAFTSMAN OR SOUTH BEND LATHE. WRITTEN ON CHUCK READS"ALMOND SIMPLIFIED CHUCK NO-342. CAPACITY LOOKS TO BE ABOUT 3/8" CHUCK HAS SEEN SOME WORK TIME AND HAS SOME DINGS. COMES WITH KEY. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
Craftsman lathe chuck 4 jaw independent 6 inch dia. for Atlas Logan South Bend
Craftsman 6" diameter 4 independant jaws chuck.
Head Stock Chuck 1 1/2 by 8 atlas,south bend lathe
Head stock chuck 1 1/2 8 jacobs Posted with
Essex Brass Corp Antique Drip Oilers for South Bend Lathe or other Machinery
Antique Essex Brass Corp. drip oilers. These look to be in great shape. It does not appear that they were ever used as I don't see any oil residue inside but they do show signs of age from spending decades in a tool box. The last picture shows an identical set installed on my lathe. I found these extras in a toolbox from my Grandfather and do not have any use for them and figure someone else out there could. No reserve. Thanks for looking. Posted with