|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$13.09 Shipping Condition: New Location: Canada This sale is for ONE NOS (new old stock) USA MADE EVEREDE LATHE BORING BAR 9/16" diameter by 8-3/4" long, 30° Boring Bar,Designed for Boring to a Shoulder, ... moreTool Bit size 5/32",EVEREDE ® Lathe Boring Bars are especially designed for small to medium sized Engine Lathe use.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Brand new No time wasted with shims All working parts hardened and precision ground Piston type tool post are precision engineered to assure ... morerepeatability accuracy Piston type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: 250-100 Piston Type Tool Post Swing Dia 12".
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , ... moreLogan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Description： This Wedge type tool post is precision engineered to assure repetitive accuracy Wedge type tool posts Have the Maximum ridigity to get the chatter free performance No time wasted with shims All working parts hardened and precision ground Package Included：.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Brand new Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , ... moreLogan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of: 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits up to1/2" .
Buy It Now
$32.20 Shipping Condition: Used Location: Eldred, United States No mounting plate. will need cleaned up before use.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , ... moreLogan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Description： Wedge type tool post are precision engineered to assure repetitive accuracy Wedge type tool posts Have the Maximum ridigity to get the chatter free performance No time wasted with shims All working parts hardened and precision ground Package List:.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States This is off a N series lathe. They were made from 1930-1935. They had bronze spindle bushings. Another indicator is the clutch pulls out. The selector ... morefor power feed or 1/2 nuts is a push/pull knob.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States South Bend 10L Heavy 10 Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are ... morefor your business no matter how big or small your contribution is. THANK YOU
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States This is off a N series lathe. They were made from 1930-1935. They had bronze spindle bushings. Another indicator is the clutch pulls out. The selector ... morefor power feed or 1/2 nuts is a push/pull knob.
Buy It Now
$10.15 Shipping Condition: New Location: South El Monte, United States SOUTH BEND. LOGAN, ATLAS FLAT DRIVE BELT. CUSTOM CUT, LATHES, MILLS, OR ANY OTHER MACHINES, CAN BE USED FOR OTHER APPLICATIONS. This listing is for up ... moreto 3/16" X 1-1/2" Wide up to 70" long. Multi-ply composite(transmission) belt custom cut. FOR A LONGER BELTS PLEASE SEE MY OTHER LISTINGS Description of our CB 16 Transmission Belt Top and Bottom surfaces: Covers of natural and synthetic rubber blends are designed to protect the carcass from abrasion. Impact, Deterioration and other injurious influences. They can be compounded to meet particular service. Conditions such as oil. Heat, abrasion, etc. 4 Ply. Approx. 3/16" thick, pulleys should be larger then 1-1/2" diameter The strength portion of the belt consisting of multiple piles of solid woven. Rubber impregnated fabric, Bonded together with friction and skim coats. The fabrics most commonly used are nylon. Cotton duck, Vinylonnylon. Rayon and polyester. Hope this helps. Please check you belt length before bidding not all models are the same. If you not sure about the length of you belt 1) adjust the tensioning bolt so that you have the min travel. Making so you have a lot of adjusting room as the belt stretches, 2) check it with a string around the pulleys or wrap a soft measuring tape around your pulleys. And take the reading. Your belt is delivered with alligator lacing attached and a connector pin ready to use. Excellent traction. Wear and oil resistance. This belt will outlast your machine. After winning item please leave a message when paying with PayPal on send a message to seller section, width& length, or send a message through eBay. Thank you. PLEASE CHECK OUR FEEDBACK FOR CUSTOMERS SATISFACTION. If you need different size belts please email me with your requirement at samhamen@yahoo.com for a quote. Conveyor belts. Flat power drive belts or industrial belting? You've reached the perfect place. Our business is here to serve you with your custom made belts. Our wide variety of stock allows us to help you with almost any
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States SB1483 Face Plate D1-4 for SB1007. The SB1483 Face Plate is to be used with the SB1007 Heavy 10™ Gearhead Lathe.
Buy It Now
$5.40 Shipping Condition: New Location: Berrien Springs, United States
Buy It Now
$5.40 Shipping Condition: New Location: Berrien Springs, United States New 10F-19 / 537-041 Cross Slide Feed Nut for Craftsman Model 101 and Atlas 10" & 12" lathes. Should fit the following models of Craftsman Lathes: 10128900, ... more10128910, 10128930, 10128940, 10128950, 10128970, 10128980, 10128990, 10128991, 10127590, 101.07403, 101.27430, 101.27440.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description?? Brand new No time wasted with shims All working parts hardened and precision ground Wedge type tool post are precision engineered to assure ... morerepeatability accuracy Wedge type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification： Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta ... more14" , Logan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Product Description： This Wedge type tool post is precision engineered to assure repetitive accuracy Wedge type tool posts Have the Maximum ridigity to get the chatter free performance No time wasted with shims.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 5pcs AXA Size Quick Change Tool Post Set for Lathe 6 - 12" 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank tool bits up to ... more7/16" .
Buy It Now
$3.97 Shipping Condition: Good Location: Addison, United States Lathe 50th Anniversary 5600. 1955 Catalog Fits South Bend.
Buy It Now
$8.95 Shipping Condition: Used Location: Youngstown, United States Will combine shipping. g5
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Brand new. No time wasted with shims. All working parts hardened and precision ground. Wedge type tool post are precision engineered to assure ... morerepeatability accuracy. Wedge type tool post Have the Maximum rigidity to get the chatter free performance. Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: 250-111 Wedge Type Tool Post Swing Dia 12".
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
Free Shipping Condition: New Location: Homestead, United States New Steady Rest Jaws / Fingers with Roller Bearings for South Bend 9" & 10K & Heavy 10" Lathes and Logan 10" & 11" Lathes. Replaces South Bend part PT128NR1 ... moreand Logan parts LP-2417 & AC-192.
Buy It Now
$18.40 Shipping Condition: Used Location: Owensboro, United States These came from a working vintage South Bend metal lathe. 9" swing with a 3 foot bed. You get 4 gears as shown, numbers are as follows: 30, 54, 60& ... more69. All teeth on gears are in nice condition with no chips or over wear. Sold as is. High bidder to please add a $6.50 priority mail fee. Thanks for looking!
Buy It Now
$6.80 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$15.47 Shipping Condition: Used Location: Ottawa, United States
Buy It Now
Free Shipping Condition: New Location: Durham, United States Our wipers are custom cut from 1/4" hard felt and cross reference to the original South Bend part number PT59T1. Wipers are sold in sets of 8 only (which ... moreallows two complete change outs of the way wipers) and they are very reasonably priced compared to OEM or re-used parts so don’t miss out on a chance to pick up a set for your lathe.
Buy It Now
$7.00 Shipping Condition: Used Location: Tewksbury, United States
Buy It Now
$6.75 Shipping Condition: New Location: Ionia, United States South Bend Heavy 10" 10L Threading Dial Thread Dial 3D Printed NEW. If you need a custom made thread dial for your lathe, let us know as we can produce ... morewhat you need. We can also print parts for any thread dial you need repaired (gears, housings, dials, etc).
Buy It Now
$15.10 Shipping Condition: Used Location: Youngstown, United States Description: Here's a South Bend 9" Model A Metal Lathe Double Banjo with the stud and nut. This bracket has the two holes that the gear guard ... moreP.N. 389N2 would mount to but it is not included. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description?? Brand new No time wasted with shims All working parts hardened and precision ground Wedge type tool post are precision engineered to assure ... morerepeatability accuracy Wedge type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: AXA Size Quick Change Tool Post Set for Lathe 6 - 12" 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank tool bits ... moreup to 7/16" Brand new Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 & 11" Nardini TT1000 & TT1200 and many other import lathes Interchangeable With Aloris, Dorian , Yuasa & Phase II It is precision engineered to assure repetitive accuracy No time wasted with shims.
Buy It Now
$15.50 Shipping Condition: Used Location: Granger, United States Antique Lathe. Change Gear Set. This set consists of the following six gears.
Buy It Now
$5.40 Shipping Condition: New Location: Berrien Springs, United States 10F-45 Bushing to fit the crossfeed screw bearing in the 10" & 12" Atlas / Craftsman lathes.
Buy It Now
$8.00 Shipping Condition: Used Location: Tewksbury, United States
Buy It Now
$10.51 Shipping Condition: Used Location: Waterford, United States NO CRACKS OR REPAIRS. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$9.00 Shipping Condition: Used Location: North Grosvenordale, United States Here is a COLLET RACK SUPPORT BRACKET in unused condition for a SOUTH BEND HEAVY 10" or 13" lathe. Original South Bend part from a school parts ... moreinventory. Retains almost all original SB gray paint and has the extension for the taper attachment.Shipping flat-rate to the lower 48 is $13 all others must contact seller for actual cost.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States (Preferred & cheapest). ( depends on your device ).
Buy It Now
$13.06 Shipping Condition: Used Location: Millstadt, United States Threads are in good condition, minor wear. 39 1/4" overall length. 2 5/8" tail carrier end.
Buy It Now
Free Shipping Condition: New Location: Alvord, United States Belt B/5L 21/32 x 55in OC.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Brand new. Made of steel. Suitable for the lathe with center line height Around 0.5" (The top cross slide tool post Mounting Surface to the lathe ... morecenter line). Such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10, Nardini TT1000 & TT1200 and many other imported lathe. Description： The Product Has Passed Strict Quality Testing Durable And Easy To Install And Replace Cost-effective, Good After-sales Service Quality Assurance For Your Peace Of Mind Package List:.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States This is off a N series lathe. They were made from 1930-1935. They had bronze spindle bushings. Another indicator is the clutch pulls out. The selector ... morefor power feed or 1/2 nuts is a push/pull knob.
Buy It Now
Free Shipping Condition: Used Location: La Habra, United States PLEASE LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF THE ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK AND I WOULD DO MY BEST TO ANSWER ANY QUESTIONS FREE ... moreSHIPPING TO THE LOWER 48 USPS FLAT RATE SHIPPING
Buy It Now
Free Shipping Condition: New Location: Franklin, United States
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$6.80 Shipping Condition: Used Location: North Tonawanda, United States South Bend 10L Heavy 10 If you have any doubts if this will work for you lathe please message and I would be happy to compare measurements Thank you for ... moreconsidering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter how big or small your contribution is. THANK YOU
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$20.10 Shipping Condition: Used Location: Eldred, United States Used 12" follow Rest. actual manufacture unknown.
Buy It Now
$18.40 Shipping Condition: New Location: Berrien Springs, United States New ER32 collet chuck with 14 piece collet set, collet wrench and 1-1/2" -8 spindle mount backing plate. Fits Atlas / Craftsman 9" thru 12" lathes. Collet ... moresizes - 1 /16", 1/8"; 3/16"; 7/32", 1/4"; 5/16"; 11/32", 3/8"; 7/16"; 1/2"; 9/16"; 5/8"; 11/16"; 3/4".
Buy It Now
$18.40 Shipping Condition: New Location: Berrien Springs, United States Collet drawbar length is adjustable and installer will need to lock the handwheel in position with provided set screws at assembly. 3Ccollet set with ... morehandwheel drawbar closer to fit Logan 10" lathes.
Buy It Now
Free Shipping Condition: Used Location: Asheville, United States This is from a 415-ZA South Bend Lathe. Structurally sound, functions as intended. Some grime, signs of normal use. Condition is good. Will come as shown. ... moreFree Fedex or Ups shipping to the lower 48 states.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States Every example I have seen has the small feet under the bed. The countershaft is generally one non-adjustable casting. This isn’t the prefect indicator ... morethough. You should check here to find the year your lathe was made….
Buy It Now
$16.99 Shipping Condition: Used Location: Union Grove, United States South Bend.
Buy It Now
$5.40 Shipping Condition: New Location: Berrien Springs, United States Atlas & Craftsman Part Number M6-306. You are sending money to them!
Buy It Now
$6.50 Shipping Condition: Used Location: Youngstown, United States
Buy It Now
Free Shipping Condition: New Location: United States New Steady Rest Jaws / Fingers with Roller Bearings for South Bend 9" & 10K & Heavy 10" Lathes and Logan 10" & 11" Lathes. Replaces South Bend part PT128NR1 ... moreand Logan parts LP-2417 & AC-192.
Buy It Now
$15.00 Shipping Condition: Used Location: North Tonawanda, United States South Bend Lathe 10L Heavy 10
Buy It Now
$8.70 Shipping Condition: Used Location: North Tonawanda, United States I don’t know why they drilled and tapped the quill but it doesn’t affect anything. ( depends on your device ). There is a couple of options.
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States This is off a N series lathe. They were made from 1930-1935. They had bronze spindle bushings. Another indicator is the clutch pulls out. The selector ... morefor power feed or 1/2 nuts is a push/pull knob.
Buy It Now
$12.00 Shipping Condition: Used Location: Medina, United States Description: Here's a real nice South Bend Metal Lathe Cross Slide Thread or Threading Stop Attachment/ Accessory. The bottom of the V is 1 5/8" ... morewhen it's closed and the top of the V is just over 2" as pictured. I was told this fits a Heavy Ten/10 but not positive. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
Buy It Now
$3.97 Shipping Condition: Used Location: Addison, United States Lathe Geared Manual Model No. 29. 1928 South Bend Brake Drum. Printed Manual.
|
|
|
|
South Bend 13 inch lathe THREADING STOP
Here is an original SOUTH BEND THREADING STOP for a 13" lathe. Part has a thumb screw tensioner and is heavier and better made than the normal SB part. Measures 3/4" from top of dovetail to screw center and is 2-3/8" at the wide part of the dovetail. From a school parts inventory from the 70's and has been on a shelf for 30 yrs. Shipping $7 flat-rate priority mail for the lower 48. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-140529a7a7c-0x103-
|
|
|
Clausing 1300 1500? Lathe Steady Rest parts South Bend Logan
Lathe Steady Rest parts I believe from a Clausing lathe but should also fit many others. These definitely fit the clausing 1300 and probably fit the 1500 as well as others with a 1" diameter. They are 1" in Diameter and about 5.5" long with a slot running up the side and around the top adjustment area. Being sold in real good working condition(I don't think these were ever used) with normal scratches etc from being in a metal shop. Sold as is as pictured.
|
|
|
EXCELLENT ORIGINAL SOUTH BEND 9 10K LATHE QUICK CHANGE GEAR BOX - BOLT ON
Excellent Condition- Original quick change gearbox with mounting bolts for a 9" or 10K South Bend lathe. Still retaining the original South Bend chart. All bushings are in fine order. No play in the shafts. As typically found. This is ready to bolt right on. In excellent condition, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1 1/2" STURDIMATIC LATHE LIVE CENTER LOGAN SOUTH BEND HARDINGE CLAUSING
1 1/2" STURDIMATIC LATHE LIVE CENTER AS SHOWN IN PHOTOS PLEASE SEE ALL PHOTOS IF YOU WOULD LIKE MORE PHOTOS OR HAVE ANY QUESTIONS PLEASE CONTACT ME
|
|
|
South Bend Heavy 10 lathe CLUSTER GEARS AND SHAFT
Here is a SOUTH BEND HEAVY 10 inch lathe CLUSTER GEAR SHAFT WITH GEARS for a single tumbler gear box. Gears and shaft are in excellent condition with no damage or gauling. This is a part removed from a school lathe in the 70's and has been on a shelf for 30 yrs. Shipping flat-rate to the lower 48 is $13 all others must contact seller for actual cost.
|
|
|
South Bend 13 inch lathe CROSS SLIDE
Here is a SOUTH BEND 13 inch lathe CROSS SLIDE with the gib screw and both compound lock screws and pucks. Part has no tool bite or other damage. Stripped and ready for paint. This is a part removed from a school lathe in the 70's and has been on a shelf for 30 yrs. Shipping flat-rate to the lower 48 is $13 all others must contact seller for actual cost.
|
|
|
VERY NICE SOUTH BEND 9" LATHE 3C COLLET SPINDLE SLEEVE FITS 3C, 1A & #3 COLLETS
Very Nice- 3C. 3 or 1A collet sleeve for use with a South Bend 9" lathe. Key is intact. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SOUTH BEND 10L HEAVY TEN LATHE HEAD STOCK GUARD/DOOR
Up for sale is a South Bend 10L heavy ten 10" lathe guard. This item is in good usable condition. Item has scratches and could use a paint job. Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund ... moreincluding return shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any difference I absorb as the seller. However on larger items shipped UPS Ground or trucking, I must add weight or adjust to reflect the percentage the host takes. For ex sample if I'm sending a 100 pound item from Massachusetts to Oregon via UPS Ground I would be paying 10 dollars towards shipping. Heavier trucked ite
|
|
|
Armstrong Ace 2050 Threading Toolholder, South Bend Atlas Logan Lathe
The shank is 3/8" x 3/4" The shank has some pretty bad pitting from rust. The top of the shank looks very clean and the bit is in good condition with lots of life left. Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
SOUTH BEND OR LOGAN METAL LATHE COOLANT STRAINER
Hole size minimum is 1-7/8" and maximum is 2-5/16"
|
|
|
Chuck Jaws, Soft, F/Small Lathe Serrated, Reusable Used South Bend?? Delta??
You are bidding on a batch of used Chuck Jaws. Soft, for a Small Lathe, Serrated, Reusable. 1/2" wide slot. Bolt hole diameter.320, 1/2" center hole distance, 20 serrations per inch. Thanks for looking. Please Read Before Bidding My Buying& Selling Terms Payments I accept Paypal. Please pay ASAP. If you have reasons for a delay let me know. My Shipping Policy Free Shipping I base all my shipping on the UPS rates. You the buyer pay all shipping costs. However I do give FREE INSURANCE FOR UPS AND FED EX SHIPMENTS. I reserve the right to ship via other carriers. Even though I base my rates on UPS. Sometimes one parcel service is more convenient. If the ad states"free shipping" It’s for the lower 48 states only. All others will be charged accordingly by location. Resolution of Problems If there are any problems with this ... moresale contact me via email and I will solve the problem. I take pride in customer satisfaction. My Return Policy Pictures Ebay Store Item Description All Sales Are Final. Please ask questions first. If I don’t know the answer I will find more info for you. Even if the item ends while I’m finding the answer keep in contact because I will be relisting it for you. If you need more details we can send more pictures to you if you provide your email address. http:stores.ebay.com/Your-Surplus-Riches Our pictures are of the actual item you are buying. Don't assume that something else is included.
|
|
|
KEYLESS METABO-FUTURO DRILL CHUCK 1/24" TO 1/2" SOUTH BEND ATLAS LATHE PART
KEYLESS METABO-FUTURO DRILL CHUCK 1/24" TO 1/2" CAPACITY WITH MT 2 TYPE TAPER. THIS WAS MADE IN GERMANY PLEASE VIEW THE PICTURES EVERY PART OF THIS CHUCK VERY CLEAN NO SCRATCHES NO SIGNS OF WEAR. THE JAWS ARE TIGHT LIKE NEW THERE ARE NO MARKINGS/SCUFFS ON THE TOP OF THE CHUCK. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before ... moreleaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1405b6cc4f2-0x100-
|
|
|
South Bend Model A 9 inch lathe with 3 1/2 foot bed
South Bend Model A 9 inch lathe with 3 1/2 foot bed. The lathe is in very good condition and good working order. It has seen very little usage in the past 45 years in my home shop. It is fitted with a GE 1/2 HP 115 volt motor and a Cutler Hammer forward/ reverse switch. And V belt is working condition but may need replacing for prolonged use. Flat drive belts are in good shape. Auction includes: South Bend 3 jaw chuck Tool holders and wrenches: Left hand. Right hand Quick Change gear box South Bend Micrometer Carriage Stop Chuck key Miscellaneous tool bits 2" thick wood and steel lathe bench. With shavings/oil catch tray Pick up in person preferred. Please ask any questions or if you would like additional photos. Payment in full due within 3 days by PayPal.
|
|
|
NICE ORIGINAL ATLAS PRESS KNURLING TOOL 4 SOUTH BEND CRAFTSMAN LATHE 3/8" SHANK
Nice- Original Atlas Press Co. knurling tool. Stamped"ATLAS PRESS CO. KALAMAZOO. U.S.A. on one side and"ATLAS KNURLING TOOL" on the other. Shank is 3 1/2" long, 7/8" high and 3/8" thick. In fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE ORIGINAL SOUTH BEND 9" LATHE COMPLETE 3C 3 COLLET RACK & COLLET BAR HANGER
Hard to find- Nice original South Bend collet rack assembly for a South Bend 9" lathe. This rack will fit#3. 3C and 1A collets. Mounts directly to the bed v groove. Collet holder tray is adjustable. Bottom clamp is original to unit. All adjusting screws are in fine order. Includes the collet bar holder- the entire set up. Nice convenient addition to your machine, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
9'' South Bend Lathe with Draw Bar and Collets
9" south bend lathe. Missing half nut handle, machine is sold as is, This is for the machine only, the bench is 11' long and is extra, please call 203-592-8402 with any questions before you bid. Buyer is responsible for all shipping and handling charges but we will assist in any way we can, free loading on your truck or trailer from our Watertown Ct facility.We encourage you to inspect before you buy.Payment is in the form of cash or bank check unless otherwise agreed upon in advance.
|
|
|
South Bend B9 9" Lathe With Tooling Original Barn Find
Fresh from an estate tucked away in the corner for years is this South Bend B9 9" lathe as shown. I blew the dust off. Plugged it in and ran it to be sure everything works, which it does. You can see where the serial number is, I just wiped it off with a rag, so this machine will clean up nicely, it's coated in oil and grease, not rusted. No broken gear teeth that I could see, no signs of abuse, just a light crash mark on the cross slide as shown. It is wired for 120 volts, it could use a new power cord. Comes with bench. Light, 3 jaw, 4 jaw, faceplate, tailstock drill chuck, bits, change gears, right and left tool holders, wrenches and keys shown. This lathe looks to be all original and in very nice shape.a great restoration project or clean and use as is. No shipping. Cash in person or PayPal only Posted with On Aug-07-13 at 18:37:31 ... morePDT. Seller added the following information: I just wanted to add. This IS NOT being stored outside, I just brought it out for better pictures. I can store the lathe for up to 2 weeks if you need time to pickup. But I would want it paid for within 48 hours of auction close, or I would relist it. Thanks for looking!
|
|
|
south bend lathe 10R draw tube collet set
draw tube.Spindle adapter,thread protector(1 7/8"8) and 11 2sb collets 5/8,9/16,1/2,11/16,7/16,3/8,5/16,1/4,3/16,1/8 and 1/16.these are to a small spindle 10" not the 10L large bore.i will use the winners zip to get accurate shipping.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1405d5b98c0-0x105-
|
|
|
south bend lathe heavy 10 sliding gear assembly and parts
sliding gear assembly.Wide gear,bed bracket to bolt banjo and guard that bolts to gear box and covers the lead screw.1 tiny chip on 1 corner of the wide gear otherwise gears are in nice condition
|
|
|
ORIGINAL SOUTH BEND 9" LATHE TELESCOPING JAW STEADY REST W CLAMP & BOLT SRD101N
VERY NICE ORIGINAL TELESCOPING JAW STEADY REST FOR A SOUTH BEND 9" METAL LATHE. ADJUSTMENT KNOBS MOVE JAWS AS THEY SHOULD. CLAMP AND BOLT INCLUDED. STEADY REST STAMPED WITH PART NUMBER SRD-101N WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VERY NICE ORIGINAL SOUTH BEND 9" 10K LATHE V BELT PULLEY UPGRADE UNIT
VERY NICE ORIGINAL V BELT PULLEY UPGRADE UNIT FOR A 9" 10K SOUTH BEND METAL LATHE. THIS UNIT WILL PROVIDE YOU WITH MORE SPEEDS WHEN RUNNING YOUR MACHINE. THE GEAR PULLEY FITS IN YOUR HEADSTOCK AND THE"FLAT" 4 STEP PULLEY FITS IN YOUR COUNTERSHAFT UNIT. I DID NOTICE ONE SMALL SPOT THAT LOOKS TO HAVE BEEN REPAIRED BUT LOOKS TO BE SOLID AND STURDY. SEE PICTURES 5& 6. ONE OF THE SET SCREWS IS NOT PRESENT, BUT CAN BE EASILY REPLACED. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE ORIGINAL SOUTH BEND 9" 10K LATHE SPINDLE TAKEUP NUT AND WASHER
NICE ORIGINAL TAKE UP NUT. SCREW AND WASHER FOR A 9" 10K SOUTH BEND METAL LATHE. PART NUMBER AS25NK2. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIGINAL SOUTH BEND 9" 10K LATHE HEADSTOCK SPIDLE BULL GEAR
EXCELLENT ORIGINAL HEADSTOCK SPINDLE BULL GEAR FOR A 9" 10K SOUTH BEND LATHE. BORE DIAMETER IS 1 5/8" AND 4 7/8" OUTER DIAMETER. PLUNGER MOVES FREELY. TEETH ARE IN EXCELLENT CONDITION. PART NUMBER AS15NK1. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE ORIGINAL SOUTH BEND 9" 10K LATHE END GEAR GUARD BRACKET HINGE PART AS147N2
Very Nice- Original side end gear guard bracket for a 9" or 10K South Bend lathe. South Bend part number AS147N2. Pin mounting diameter is 1/2" All in very fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VERY NICE ORIGINAL SOUTH BEND 9 10K METAL LATHE BACK GEAR COMPLETE ASSEMBLY
Very Nice- Complete original back gear assembly for a 9" or 10K South Bend lathe. Includes original taper pins. Oil screw and all hardware. Gears are in fine order. Moves freely and smoothly on eccentric shaft. Nice complete original assembly. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MT2 V BLOCK PIPE CROTCH CENTER TOOL 4 MACHINIST ATLAS CRAFTSMAN SOUTH BEND LATHE
MT2 crotch center. V Block face measures 2 5/16" x 1 3/4" MT2 shank is 3 3/8" long. V Block is stamped LOUIS G. PANZO. Work marks noted. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VERY NICE ORIGINAL SOUTH BEND LATHE SKINNER 6" 4 JAW REVERSING CHUCK 1 1/2" x 8
Very Nice- Original South Bend Skinner 6" 4 jaw chuck with reversing jaws and key. Chuck is stamped"No. 4006-50 SOUTH BEND LATHE WORKS MADE IN USA BY SKINNER CHUCK CO. Back plate is stamped with the South Bend logo. Chuck is 1 7/8" thick. Thread mounting diameter is 1 1/2" diameter 8 threads per inch. File marks noted on key. Jaws move smoothly throughout range. In fine order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Atlas Craftsman Logan South Bend Lathe Union 4 Jaw Chuck 1 1/2-8 TPI
Removed from a 10" Logan model 200 lathe. Excellent used condition. Union brand. Made in USA, 8" diameter, 1-1/2-8TPI threads, Independent jaws, includes key. Comes as shown.
|
|
|
Atlas Craftsman Logan South Bend Lathe Square Turret Tool Post
Unknown lathe square tool post. Holds 5/8" tooling. Has 9/16" thru hole, 2" square, 1.5" tall, 1.3" from bottom to base where tool sits. Includes six clamping bolts. Was found on a South bend 10k lathe. Does not include T nut or mounting hardware. Comes as shown.
|
|
|
KENNAMETAL S 28 KTF TOOL HOLDER CUTTER SOUTH BEND ATLAS METAL LATHE 33
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~ 10 1/8" LONG s 28 KTF shank 3" x 1 1/2" diameter tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for ... moreyour lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
|
|
|
South Bend Heavy 10 lathe primary gear PN 657R1
Here is a primary drive gear for a South Bend Hvy 10 lathe. Gear PN PT 657R1 and fits a Hvy 10 lathe with the single tumbler gearbox. Gear is good and square with no damage and most original paint. In storage the last 30 yrs. Shipping flat-rate to the lower 48 is $7 all others must contact seller for actual cost.
|
|
|
South Bend 9"X24" Metal lathe 3 Jaw CL344Z Gunsmith 110v Cabinet Quick Change
Used South Bend 9" metal lathe Model number CL344Z Bed is 3 1/2' CTC about 24" bore is 7/8" All gears are in good shape. The lathe itself has some wear in the ways with some dinges and dents, minor scratching. There is also some wear on the compound from the chuck. This lathe includes 5" 3 jaw chuck, new quick change toolpost with 5 holders, thread dial, forward only drum switch, and quick change gearbox. The backlash is about 1/2 turn in crossfeed and 1/2 turn in compound. The spindle is 1 1/2" 8tpi. It has a 110 volt motor and is on the original fabricated South Bend base cabinet. This lathe runs good and all functions work fine. The feed selection chart is scratched. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. ... moreMissouri, forklift loading is free. Email me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with eBay Mobile. Posted with
|
|
|
SOUTH BEND 9" MODEL C METAL LATHE LEAD SCREW SUPPORT BEARINGS
NICE ORIGINAL LEAD SCREW SUPPORT BEARINGS WITH MOUNTING BOLTS FOR A MODEL C 9" SOUTH BEND METAL LATHE. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Armstrong right hand lathe toolholder- will fit smaller South Bend, Atlas, Logan
This auction is for the right hand lathe tool holder shown in the photos. This is in good shape. The tightening screw turns freely and there is only slight wear on the top surface where the lantern tool post clamps down. This takes 1/4 inch square bits and will work with the 9 and light 10 South Bend lathes, 9, 10 or 12 inch Atlas lathes, or the 9 inch Logan lathe, probably others as well. The body dimensions are 13/16 inch high by 3/8 inch wide so you can check your lantern tool post to see if this will fit. Email me if you have any questions and thanks for looking.
|
|
|
South Bend 10K or 9" Lathe Lead Screw Gear 20T 5/8" Bore
Offered is a 20 tooth feed screw gear off of a 9" South Bend lathe. it is in ggod condition. ant questions please email me.
|
|
|
10" Lathe Chuck D6 Backing Plate logan south bend clausing used
10' Outside Dia. has step up =0.488" dia. of step 7.855.center hole 3-1/4" missing 5 allen cap screws to hold pins. Has surface rust.please look carefully at pictures before buying. Normal 0 false false false MicrosoftInternetExplorer4 T hank you for looking at this item.Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when beneficial. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. Here at Bill’s Tools& Used Machinery we offer a Money Back ... moreguarantee No Questions Asked(well we might ask why but will not refuse returns) customer satisfaction is very important to us All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make other arrangements for payment. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly, most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others, please contact me if you have no
|
|
|
South Bend Lathe 13 Tool Post, Tool Bit Holders & Knerling Tool
Includes the following: 1 New South Bend rocker type tool post SB1346 1 Used cut off blade tool holder with cut off blade(Armstrong# 83-169) 1 Used knerling tool diamond pattern(Armstrong# No1K) 1 Used shop made tool bit holder with tool bit. Any questions please ask before bidding.
|
|
|
South Bend Lathe Heavy 10 Large Cross Feed Dial
Used large 2 1/4" Dia. cross feed dial in good condition. Please check dimensions for proper fit. Any questions please ask before bidding.
|
|
|
1938 South Bend 9 Inch Workshop Precision Lathe bulletin no.33-j
up for auction is this sep.1938 south bend 9-inch workshop lathe bulletin no.33-j. this is in great shape and would be great addition to your collection.please email any questions and thanks for stopping and looking and happy bidding!
|
|
|
12" 3 jaw Gibraltar Master Jaws 93220176 lathe south bend clausing
12" 3 Jaw Gibraltar Master Jaw 93220176.looks new but being sold as used.it came in a load of new& used tools I bought.list price is $248.86 T hank you for looking at this item.Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when beneficial. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. Here at Bill’s Tools& Used Machinery we offer a Money Back guarantee No Questions Asked(well we might ask why but will not refuse returns) customer satisfaction ... moreis very important to us All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make other arrangements for payment. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly, most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others, please contact me if you have not received your item within 30 days. Again Thanks for looking Bill& Betty L-4077-2495-S4 336.Rcm
|
|
|
MACHINIST TOOLS LATHE MILL Lot of Solid Brass South Bend 3 C 3C Collet s
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. 1/4" 31/64" 27/64" 27/64" 3/16" 1/2" THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined ... moreshipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1 c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-1406a80a330-0xff-
|
|
|
South Bend Workshop lathe bed gear rack and screws
UP FOR SALE- PARTS FROM MY PERSONAL SOUTH BEND 415Y 9" WORKSHOP LATHE. YOU MAY NOT BE ABLE TO SEE IT. BUT THIS CLEANED UP REALLY NICE. THE TEETH ARE NOT CHIPPED OR WORN, OR EVEN SCRATCHED! NO RUST, AND I DIDN'T FIND ANY RUST TO CLEAN OFF WHEN I REMOVED IT FROM THE MACHINE. I WOULD SAY THAT THIS GEAR RACK IS ABOUT 99% OF NEW CONDITION, AND YOU WILL HAVE NO TROUBLE FITTING IT TO YOUR SOUTH BEND 3 FOOT BED. ORIGINAL SCREWS INCLUDED. I GIVE ALL MY SALES A 14 DAY GRACE PERIOD FOR RETURNS. PAYPAL ONLY. CHECK MY SELLER RATING AND SMILE! SHIPS TO LOWER 48 STATES ONLY. BUYER PAYS RETURN SHIPPING. PLEASE ASK ANY QUESTIONS BEFORE YOU BID. AND BE SURE YOUR PAYPAL ADDRESS IS CURRENT. I WILL HAVE MORE WORKSHOP 9" PARTS UP FOR SALE VERY SOON- PLEASE CONTACT ME IF YOU ARE LOOKING FOR SOMETHING IN PARTICULAR AND I CAN MAKE IT A PRIORITY. RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1406b1f36c5-0x108-
|
|
|
Nice Everede USA Ajustable 3/8" Boring Bar Holder 4 Atlas South Bend Lathe
This Sale is for ONE EXCELLENT EVEREDE ADJUSTABLE BORING BAR HOLDER No. 1. The holder holds 3/8" Bars ideal for ATLAS SOUTHBEND LATHES. Holder comes with 3/8" Everede Bar and insert as shown. The bar fits into a collet with the hole drilled off center by turning the collet the center height of the cutter is adjusted. A ruler or scale shown is for size reference only and not part of sale. Thank you for looking. We ship Wednesday through Friday and are happy to combine orders for shipping costs. Please check my other sales& auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items ... morecross the border. These are the sole responsibility of the buyer. have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We accept PAYPAL for sales within north America. All items shipped to the US are sent by courier(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping rates listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arising from the use or possession of any purchased equipment, device or component, 3. any pro
|
|
|
SOUTH BEND LATHE 9" + 10K SADDLE CARRIAGE LOCK , NICE CONDITION
SOUTH BEND LATHE 9" + 10K SADDLE CARRIAGE LOCK. VERY NICE CONDITION. Please let the pictures help with the description and condition and view my other auctions for more LATHE TOOLING + PARTS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
|
|
|
ORIGINAL SOUTH BEND 9" LATHE 5 1/8" FACE PLATE SFP-100NK
NICE ORIGINAL FACE PLATE FOR A SOUTH BEND 9" METAL LATHE. DIAMETER IS 5 1/8" THREADS ARE IN FINE ORDER. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIGINAL SOUTH BEND 9" 10K LATHE 2 STEP MOTOR PULLEY 5/8" BORE
ORIGINAL TWO STEP MOTOR PULLEY FOR A 9" 10K SOUTH BEND LATHE. BORE IS 5/8" WITH 3/16" KEYWAY. SMALLER PULLEY MEASURES 2 1/4" DIAMETER. LARGER PULLEY MEASURES 3 7/8" DIAMETER. INCLUDES KEY, SET SCREW IS INTACT. I DID NOTICE A HAIR LINE FRACTURE ON THE TOP OF THE SMALLER PULLEY SEE 3RD PICTURE. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ROCKWELL 6" 4 JAW CHUCK 4 ATLAS CRAFTSMAN SOUTH BEND LATHE 1 1/2 X 8
Excellent 6" Rockwell 4 Jaw Chuck for a Metal Lathe. 1 1/2" X 8" TPI. Marked on chuck is"Rockwell Made in USA 25873" Jaws move freely throughout range and are in Excellent condition. Spindle threads are in nice condition. Comes with key. Will always combine shipping when possible. Any questions feel free to e-mail. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIGINAL SOUTH BEND 9" 10K METAL LATHE ACCESSORY THREAD DIAL INDICATOR
Excellent Condition- Original South Bend thread indicator dial with mounting screw for a 9" or 10K South Bend lathe. Indicator is sharp and legible. Portion of South Bend label remains on cast. As shown. Gear is stamped TD101. In excellent condition, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Cushman 4 jaw scoll chuck for south bend atlas or logan lathe
Cushman 4 jaw scoll chuck. 6.375" in diameter. Condition is good. Shipping is FREE to U.S. If you have any questions feel free to give me a call or text at 913 636 6107. Thanks Mike. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-1406eb0f0b6-0xf4-
|
|
|
LATHE TOOL BITS 1/2" HIGH SPEED & CARBIDE 21 PCS. SOUTH BEND MACHINIST USED
1/2" assorted lathe tool bits. All used see pics. 10 on the left are high speed and 11 on the right are carbide. I have the holders listed in another auction. PAYPAL preferred but will accept a m$ney $rder. We only ship to US locations. Shipping and handling for this item will be $ 5.00 I will be happy to combine shipping whenever possible to keep your cost as low as possible. I often use the Postal Flat Rate boxes. Please see my other auctions for machinist tools. When you receive your item and all is OK please leave me a feedback so that I know you received it and I will leave a feedback for you. If there is a problem please let me know right away so I can correct it. Thank You.
|
|
|
VERY NICE ORIGINAL SOUTH BEND 9" LATHE REVERSE GEAR BRACKET
VERY NICE ORIGINAL REVERSE GEAR BRACKET FOR A SOUTH BEND 9" LATHE. TEETH ARE IN VERY NICE CONDITION. COMES WITH BOLT AND WASHER. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIGINAL SOUTH BEND 9" 10K LATHE GEAR BOX BANJO SAFETY GUARD PART NUMBER 389NK2
VERY NICE ORIGINAL GEAR BOX BANJO SAFETY GUARD FOR 9" 10K SOUTH BEND LATHE. PART NUMBER 389NK2. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE ORIGINAL SOUTH BEND 9" LATHE TAILSTOCK SPINDLE
Nice Original South Bend 9" lathe Tailstock Spindle. Indicators are clear and legible. Bore is in nice condition. Will always combine shipping when possible. Any questions feel free to e-mail. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
USA Armstrong 1/2'' Square Lathe Wrench Atlas South Bend 9 point
Nice Wrench 5.5' long
|
|
|
Logan 12"x36" engine lathe south bend southbend
Logan 12"x36" engine lathe. Good condition. 1hp. 3 phase motor. Can easily be swapped out for single phase or ran on a small inexpensive convertor. Spindle bore is 1 3/8" Includes: Jacobs collet closer Full set of collets Steady rest 10" face plate 4-way turret tool post All needed wrenches Ways are in good condition. Cross slide Has less than a 1/8" of a rotation or backlash. Loading on to your truck is free. Call with any questions to 724-344-5945. Item is sold as is. No warranties or returns after sale.
|
|
|
South Bend Parts List for 9" Model A Bench Lathe (17957)
South Bend Parts List for 9" Model A Bench Lathe: Parts List No. P-444 For 9-inch Model A Horizontal Motor Drive South Bend Bench Lathes You are bidding on A COPY of the manual shown in the photo. Loc.328) Loc. 9412) Inv.17957) Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept ... morefor international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14073b3c339-0x100-
|
|
|
NICE ORIGINAL 80 TOOTH IDLER GEAR FOR SOUTH BEND 9" 10K LATHE 33NK1
EXCELLENT SOUTH BEND 9" OR 10K 80 TOOTH IDLER GEAR METAL LATHE. OUTER DIAMETER IS 4 9/16" BORE DIAMETER 5/8" AND THE RAISED HUB IS 1/2" TEETH ARE IN VERY NICE CONDITION WITH NO CREAKS OR CHIPS. STAMPED 33NK1. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1941 South Bend Lathe Works How to Run a Lathe Catalog Manual 41st Ed Vintage VG
soft cover in very good condition. pages are very clean. cover shows a little wear. 1941. Guaranteed to ship with extreme care. Happy to combine shipping. Please email me any questions.Be sure to add me to your! Check out my!
|
|
|
6 Jaw Buck Chuck 6" Logan Craftsman South Bend Metal Lathe continuous spiral
Chuck came from small Ma& Pa shop. he made tool and die parts for Boeing. i purchased the shop and got excellent quality tooling from it for my own use and re-sale. I have no need for it as i have no back plate for my machinery. chuck will be packaged up and a rust inhibitor will be sprayed on it for corrosion prevention. It comes off easy with a de-greaser.
|
|
|
SOUTH BEND How to Run a Lathe Volume1 Edition 43, 1944, Operator's Manual
SOUTH BEND How to Run a Lathe Volume1 Edition 43. 1944, Operator's Manual, The Care and Operation of A Screw Cutting Lathe, by J J OBrien- M W OBrien Leatherette Bound. Great used shape Posted with
|
|
|
Item# 2492 South Bend Engine Lathe Model CL 175 C
I South Bend Engine Lathe Model CL 175 C Item#2492 Product Description: Swing over Bed is approx. 17.5” Bed length is 6’ Inch Threading Work Lamp 12 Speeds(with use of low and high and back gears) Steady Rest Tool post holder 3 Jaw Chuck 4 Jaw Chuck 5c Draw Bar with some collects(Draw bar was repaired but functions well) Live Center Location: Connecticut Price: $3800.00. SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call Joe at On Target with all your equipment questions-203-441-4655
|
|
|
SUPERB 1985 14" x 40" SOUTH BEND MODEL "FOURTEEN" ENGINE LATHE MADE IN USA
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking SUPERB 1985 14" x 40" SOUTH BEND MODEL"FOURTEEN" ENGINE LATHE MADE IN USA Click Here For More South Bend Machines Click Here For More Toolroom Machines- ENGINE LATHES(s) Questions ... moreabout this Machine? Call David at(800) 873-6224 ext 7570 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. In business since 1971. All used items bought from our eBay store are covered by a standard MDNA(Machinery Dealer's National Association) 30 day return privilege. Which means you can return an item you are dissatisfied with for a full refund. Please for complete details on how this works. New machines are covered under their own warrantees. Details of each warranty can be found within the quotation for all new machines. Most items in our store are located in our warehouse in Harrison. New Jersey- about 9 miles from New York City. You may inspect any item prior to purchase, under power in most cases, simply by calling and arranging an inspection. There is no charge for this. We are a Certified Square Trade Seller- click on the Square Trade logo for details. Questions? Call us at: 973) 497-7500 Shipping Policy Will ship to Worldwide. Payments& Checkout We accept PayPal. Visa&
|
|
|
VERY NICE ORIGINAL SOUTH BEND 9" TELESCOPING STEADY REST METAL LATHE ATTACHMENT
Very Nice- Complete Original South Bend telescoping steady rest for a South Bend 9" lathe. Jaws move smoothly throughout range. Original knurled thumb screws function as they should. All three jaws are in excellent condition. Castings are stamped PT115N1 and PT116NR1. Base is stamped SRD101N. Very nice unit, in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIGINAL SOUTH BEND 9" 10K LATHE MILLING ATTACHMENT & WOODEN BOX
Excellent Condition- Complete Original South Bend milling attachment for a South Bend 9" or 10K lathe with its original South Bend wooden box. A few marks noted as shown in the photo in the clamping area Unit still has original scrapings. It does appear that it has not seen much work time at all. Listing includes both V blocks and 3/8" wrench. Wooden box is also in excellent condition, still retaining original South Bend tag. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MACHINIST TOOLS LATHE MILL *LOGAN *431 *5" *3 JAW CHUCK* ATLAS SOUTH BEND
UP FOR AUCTION: PRECISION MACHINIST TOOLS& PARTS LOGAN 431 5" 3 JAW CHUCK ATLAS SOUTH BEND* PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& ... moreSHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. No RETURNS.
|
|
|
End cover from a south bend lathe casting # PT873R1 looks unused
This was an itwm I bought at an auction- it was in with a bunch of South Bend Lathe parts and is painted that grey color South bend stuff always seems to be. Check the dimensions and the casting# to make sure though
|
|
|
ORIGINAL SOUTH BEND 9" 10K LATHE HEADSTOCK SPINDLE THRUST BEARING NO. 207NK1
VERY NICE ORIGINAL SPINDLE THRUST BEARING FOR A 9" 10K SOUTH BEND METAL LATHE. No. 207NK1. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1 1/2" X 8" TPI BACK PLATE 4 7/8" DIAMETER FOR ATLAS CRAFTSMAN SOUTH BEND LATHE
NICE BACK PLATE FOR A METAL LATHE. 1 1/2 X 8" TPI. DIAMETER MEASURES 4 7/8" WITH A 5/8" HUB AND 1/2" THICK. THREADS ARE IN NICE CONDITION. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
9" 10K SOUTH BEND LATHE TUMBLER GEAR & BOLT EXCELLENT PART
9" 10K SOUTH BEND LATHE TUMBLER GEAR& BOLT EXCELLENT. IT'S IN LIKE NEW CONDITION. THE ITEM HOLDING THE TUMBLER GEAR IS NOT IN THIS SALE. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE ... moreREAD MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS I DO SELL INTERNATIONALLY.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1407a74976f-0x104-
|
|
|
LEAD SCREW FOR A 9" SOUTH BEND 36" LATHE BED MODEL C LEAD SCREW IS 39 1/2" LONG
LEAD SCREW FOR A 9" SOUTH BEND 36" LATHE BED MODEL C LEAD SCREW IS 39 1/2" LONG IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL ... moreCOMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
9" SOUTH BEND LATHE HEADSTOCK CLAMPS & BOLTS HEAD STOCK PARTS
9" SOUTH BEND LATHE HEADSTOCK CLAMPS& BOLTS HEAD STOCK PARTS IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. ... moreIF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS I DO SHIP INTERNATIONAL
|
|
|
16N JACOBS DRILL CHUCK WITH 1/8" TO 5/8" CAPACITY MT-4 SOUTH BEND ATLAS LATHE
16N JACOBS DRILL CHUCK WITH 1/8" TO 5/8" CAPACITY MT-4 MOUNT NO KEY. NOTE THE ITEM HOLDING THE CHUCK IS NOT INCLUDED IN THE SALE. IF YOU ARE CLOSE ENOUGH I WILL TRY SHIPPING AS PRIORITY MAIL. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards ... morea positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
14N JACOBS SUPER BALL BEARING DRILL CHUCK 0-1/2" MT-3 SOUTH BEND ATLAS LATHE
14N JACOBS SUPER BALL BEARING DRILL CHUCK 0-1/2" MT-3 MOUNT NOTE THE ITEM HOLDING THE DRILL CHUCK UP IS NOT IN THIS SALE. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK ... moreAND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
SOUTH BEND 9 10K LATHE SADDLE LARGE DIAL CROSSFEED SCREW
Nice Original South Bend saddle crossfeed drive screw with standard graduated large diameter collar for a South Bend 9" or 10K lathe. The standard graduated large diameter collar dial is sharp and legible. Reads to 100. Each indicator represents.001" movement. Saddle drivescrew is showing light wear, and there is very slight surface pitting spots on parts of the collar. Will always combine shipping when possible. Any questions feel free to E-mail. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE ORIGINAL SOUTH BEND 9" 10K LATHE SADDLE CARRIAGE LOCK AND BOLT
NICE ORIGINAL 9" OR 10K SOUTH BEND LATHE SADDLE CARRIAGE LOCK AND BOLT. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SOUTH BEND LATHE 9" or 10K ORIG. DRUM SWITCH MADE FOR SOUTH BEND BY FURNAS
SOUTH BEND LATHE 9" or 10K ORIG. DRUM SWITCH MADE FOR SOUTH BEND BY FURNAS. All the contacts inside are fine. Please let the pictures help with the description and condition and view my other auctions for more LATHE TOOLING + PARTS. Check my feedback. Satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
|
|
|
HOW TO RUN A LATHE SOUTH BEND LATHE INC 55 EDITION
You are bidding on the book. How to Run A Lathe, South Bend Lathe, Inc. It is the 55th Edition and looks like copyright in 1958. 128 Pages, soft cover and is approx 8" by 5 1/4" Book is in very good condition, only writing I see is top right on front cover. All pages in great shape, book has been taken care of. Ask any questions you might have. Thank You! Please ask any questions you have. And I will combine items to save you shipping! Thank You! PAYMENT IS EXPECTED WITHIN 72 HRS UNLESS PRIOR ARRANGMENTS HAVE BEEN MADE! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
South Bend 9" Metal Lathe Compound Assembly
The following auction is for a South Bend 9" Metal Lathe Compound Assembly It is in good condition with wear. In good working condition. Has a piece missing where the tool holder would go. Still workable. See pictures. It has some surface rust and oxidation in places. It is o ff of a South Bend 9" Metal Lathe Sold as pictured. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 1 3.00 for USPS Priority Mail shipping with Delivery Confirmation within the United States. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
ORIG SOUTH BEND 9 10K LATHE COUNTERSHAFT DRIVE LEVER HANDLE PART 1945N1 & PIN
Very Nice- Original South Bend countershaft lever for a 9" or 10K South Bend lathe with horizontal drive. Lever is stamped with South Bend part number 1945N1. Includes original pin. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-1407f708820-0xf7-
|
|
|
NICE ORIGINAL SOUTH BEND 9 10K METAL LATHE HEADSTOCK SPINDLE BULL GEAR
Nice- Original South Bend bull gear for a 9" or 10K South Bend lathe. Bore diameter 1 5/8" 4 7/8" OD. S pring is present. Still retaining original paint. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1407f708aee-0x109-
|
|
|
NICE SOUTH BEND 9" 10K LATHE V BELT 4 STEP PULLEY UPGRADE - BOLT ON INSTALL
Nice original South Bend upgrade for your South Bend 9" or 10K three step flat belt driven lathe. Upgrade to a 4 step V groove set. Slide your existing 3 step cones off the headstock spindle and countershaft and replace with the 4 step V belt pulleys. Nice- Original South Bend 4 step V belt pulley assembly for the headstock. Matching 4 step V belt countershaft pulley. Both set screws are present. V cone pinion gear is in fine order, teeth are very nice. Nice complete bolt on upgrade package in fine order. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
South Bend Lathe Milling Attachment Heavy 10" Machine
This will fit the heavy 10" South Bend Lathe. Listed as used but I believe it is new with shelf wear. This is very snug with less than.005 backlash on the adjusting screw. No damage. No abuse, no wear but needs a cleaning and a paint job. Comes with the original crank and wrench. Ships in a large flat rate box.
|
|
|
South Bend Lathe 9" Bed Turret By Utility Tool and Die
This is a very compact bed turret that could be fitted to a 9" South Bend Lathe. It appears to have had little use because it is snug in movements. No slop at all. It does need a cleaning, painting and oiling though. Overall size is 15" long by 10" wide with the handles off by 7" tall. From the base to the center of the turret tooling 4 1/2" This was made by Utility Tool and Die Manufacturers.
|
|
|
Oil Trough of South Bend lathe apron, 9" or 10"???
This is the oil trough of a South Bend lathe apron. Not sure about model, possible 9" or 10" please see photos(the apron in the picture is just for information only not included in this auction, please see my other auction#130968248552) Bidder please verify by yourself of the model. Sale"AS IS" for parts only. No return. Please ask questions before you bid. U.S. CONTINENT bidders only. Please pay within three days of auction end. Thanks and Happy Bidding!
|
|
|
South Bend Lathe Head Stock Back Bracket 13"???
I was told this is a South Bend lathe head stock back bracket. Not sure about model, possible 13" please see photos. Bidder please verify by yourself of the model. Paint on this part has been mostly removed(you will expect some rust due to no oil& paint protection for the bare metal) ready for new prim& paint. Sale"AS IS" for parts only. No return. Please ask questions before you bid. U.S. CONTINENT bidders only. Please pay within three days of auction end. Thanks and Happy Bidding!
|
|
|
CRAFTSMAN L 2035 TURNING TOOL HOLDER ATLAS CRAFTSMAN SOUTH BEND LATHE PART
CRAFTSMAN L 2035 TURNING TOOL HOLDER HOLDS 3/16" CUTTERS. SHANK IS 5/8" X 5/16" EXCELLENT CONDITION SEE THE PICTURES THE 4 CRAFTSMAN TOOL HOLDERS 2033. 2034, 2035, THREADING 2031 TOOL LOOK LIKE THEY WERE NEVER USED NO SIGNS OF WEAR. THIS FITS 6" ATLAS 618& CRAFTSMAN 101 LATHES. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, ... moreand before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS I DO SHIP INTERNATIONALLY
|
|
|
CRAFTSMAN R 2034 TURNING TOOL HOLDER ATLAS CRAFTSMAN SOUTH BEND LATHE PART
CRAFTSMAN R 2034 TURNING TOOL HOLDER HOLDS 3/16" CUTTERS. SHANK IS 5/8" X 5/16" THIS FITS 6" ATLAS 618& CRAFTSMAN 101 LATHES. EXCELLENT CONDITION SEE THE PICTURES THE 3 CRAFTSMAN TOOL HOLDERS 2033. 2034, 2035, LOOK LIKE THEY WERE NEVER USED NO SIGNS OF WEAR. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving ... morenegative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS I DO SHIP INTERNATIONALLY 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-140842ff2ff-0xf6-
|
|
|
ARMSTRONG OS TOOL HOLDER ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE PART
ARMSTRONG OS TOOL HOLDER HOLDS 1/4" CUTTING BITS SHANK IS 7/8" X 7/16" EXCELLENT CONDITION. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. ... moreI WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS I DO SHIP INTERNATIONALLY
|
|
|
How To Run A Lathe 56th Edition South Bend Lathe 1966 Indiana RARE 128 Pages PB
The books listed this weeks auction have come from one person’s collection. They have a slight odor of some sort but it doesn’t seem strong to me. There is no water damage. May be storage, pet, smoker, woodstove, all or none, etc. See condition for additional condition details. If you have any questions or would like more pictures. Please let me know via e-Bay message“to seller” Will combine shipping. Please ask for combined price before bidding. It will be mailed Media Mail with Delivery confirmation. Thanks for looking!
|
|
|
SOUTH BEND LATHE 9" + 10K , 80 TOOTH IDLER GEAR 33 NK1 , NICE CONDITION
SOUTH BEND LATHE 9" + 10K. 80 TOOTH IDLER GEAR 33NK1, NICE CONDITION, NO CHIPPED, CRACKED OR BROKEN TEETH. Please let the pictures help with the description and condition and view my other auctions for more LATHE TOOLING + PARTS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
|
|
|
SOUTH BEND LATHE 9" + 10K HALF / SPLIT NUTS HANDLE , NICE CONDITION
SOUTH BEND LATHE 9" + 10K HALF/ SPLIT NUTS HANDLE. NICE CONDITION. Please let the pictures help with the description and condition and view my other auctions for more LATHE TOOLING + PARTS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
|
|
|
SOUTH BEND LATHE 9" + 10K HEAD STOCK SPINDLE TAKE UP NUT NICE CONDITION
SOUTH BEND LATHE 9" or 10K HEADSTOCK SPINDLE TAKE UP NUT. NICE CONDITION. Please let the pictures help with the description and condition and view my other auctions for more LATHE TOOLING + PARTS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
|
|
|
SOUTH BEND 9" LATHE COMPOUND REST SWIVEL SHOES + BOLTS , EXCELLENT CONDITION
SOUTH BEND 9" LATHE COMPOUND REST SWIVEL SHOES + BOLTS. EXCELLENT CONDITION. Please let the pictures help with the description and condition and view my other auctions for more LATHE TOOLING + PARTS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
|
|
 |