In 
 
Order by: 
Available to: 
Price: 
 - 
$
99.95
23h 55m 18s
0 bids
$8.99 Shipping
Condition: Used
Location: Butler, United States
$
29.99
Buy It Now
Condition: New
Location: Saint Charles, United States
Fully machined back plate can be mounted onto 4"3 jaw or 4 jaw self centering and independent lathe chuck (p/n 202-5410, 202-5472,202-5600, 202-5419). ... moreThe size of back plates's D1 should be a little bit smaller than the size of Chuck's D1.
$
100.00
Buy It Now
$10.45 Shipping
Condition: Used
Location: Millstadt, United States
Fits taper turning slide tongue: width 3/4”, length 1/4”, 3/16” thick. Wedge is not the original. This item is in good condition and has an overall height ... moreof 3”.
$
74.50
Buy It Now
Condition: New
Location: Saint Charles, United States
Fully machined back plate can be mounted onto 8" 3 or 4 jaw self centering lathe chuck (p/n 202-5434, 202-5412,202-5474). The size of back plates's D1 ... moreshould be a little bit smaller than the size of Chuck's D1.
$
24.50
Buy It Now
$5.30 Shipping
Condition: Used
Location: Cockeysville, United States
Excellent Condition- Three Original South Bend Lathe Works brochures on 13" Turret lathes from 1956. 1957 and 1958, Bulletins 5624, 5813 and 5624. ... moreAll six fold, double sided. Great collectible pieces. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
58.00
Buy It Now
$18.35 Shipping
Condition: Used
Location: Glendora, United States
Rare item. South Bend Lathe Works "Precision Model" 14" Drill Press Internal Light Assembly. This is the original installed light assembly found in the ... moreSouth Bend 14 inch drill press. Every single thing is original including the screws and terminals. This mounts underneath the top of the drill press head. Original mounting screws and bolts included.
$
149.99
Buy It Now
$15.40 Shipping
Condition: New
Location: Baltimore, United States
Custom made stainless steel Ice Pick that has been cut to size, sharpened and mounted on a custom Aluminum handle. The ice pick constitutes two separate ... morepieces. The ice pick is totally custom made on my SOUTH BEND lathe.
$
30.00
Buy It Now
Free Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. If you want ... morea bunch of "gears" then sure we can talk but for one or two.
$
99.99
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown, United States
Condition is Used.
$
16.99
Buy It Now
$3.85 Shipping
Condition: Used
Location: Nashville, United States
As shown, good threads & keyway.
$
3.99
Buy It Now
$1.25 Shipping
Condition: Used
Location: United States
$
42.00
Buy It Now
$7.30 Shipping
Condition: Used
Location: Nashville, United States
Atlas Lathe Mill Southbend 5/16"-18 Cast Iron Handle P906.
$
111.50
Buy It Now
$34.53 Shipping
Condition: New
Location: Saint Charles, United States
SHARS 4" 4 Jaw Self Centering Lathe Chucks with TIR Certificate + 1-8 Back Plate New. For back plate you would not need to drill any mounting holes but ... moreyou will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
20.99
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
Hardinge 3C Lathe Collet Atlas, South Bend 9" 3C 1A. look at all pictures for the full description of the item comes exactly as shown in pictures free ... moreshipping to the lower 48 United States international shipping available please contact before making final purchaseUSPS FIRST CLASS MAIL
$
25.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! Oliver Older 12" 159-A Lathe Operator's& Parts Manual Click for Our Complete Catalog ... moreManual Description: Number of Pages: 17. This is a reproduction. Not a photocopy, of an original Oliver 12" 159-A Lathe Operator's and Parts Manual. This manual covers the older version of the 159-A made in the 40's. We also have the manual for the later version made in the 60's and 70's in our store as well. This manual contains information on specifications lubrication. Wiring diagrams, and part diagrams. I also added a three page flyer on the lathe to provide more information on the specifications of the machine. Oliver usually only covered what they believed were the important parts of their machines in their manuals. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is l
$
95.00
Buy It Now
$14.00 Shipping
Condition: Used
Location: Big Lake, United States
Scissor Type Knurling Tool Metal Lathe Holder Southbend Atlas Jet. I had some bushings welded on both sides so the 1/4” pins don’t spin.
$
33.99
Buy It Now
Free Shipping
Condition: Used
Location: Dayton, United States
13-2-G-11.
$
75.00
Buy It Now
$12.65 Shipping
Condition: New
Location: Baltimore, United States
Custom made Ice Pick that has been cut to size, sharpened and mounted on a custom ornate titanium handle. COOL STUFF IS COMING! STAY TUNED! This tool ... moreis totally custom made on my 2014 - SOUTH BEND lathe.
$
69.99
Buy It Now
Free Shipping
Condition: Used
Location: Ivoryton, United States
MPN: AS60NK2. South Bend 9 or 10K Lathe Saddle Casting. Inventory # (6754). Saddle casting shows average wear on the V-grooves and dovetail. Fits SB 9" ... more& 10K Precision Lathes. Safety First! Always use the right part!
$
25.00
Buy It Now
Condition: Used
Location: Youngstown, United States
$
550.00
Buy It Now
$59.36 Shipping
Condition: Used
Location: Rochester, United States
Jacobs Spindle Nose Lathe Chuck #91F1 21/8-8tpi W/collets Southbend. Condition is "Used". Shipped with USPS Parcel Select Ground.
$
29.99
Buy It Now
$4.75 Shipping
Condition: New
Location: Lima, United States
Our brass reproduction of the Monarch 10ee lathe quill oiler / dauber. These are used to place a drop of lubricant onto the tip of a dead center to provide ... morethe necessary lubrication. Maybe you need to repair your flat leather belt on your machine and need a neat clamping jig?.
$
35.00
Buy It Now
$12.65 Shipping
Condition: New
Location: Baltimore, United States
Custom made Ice Pick that has been cut to size, sharpened and mounted on a custom grooved Aluminum handle. This tool is totally custom made on my 2014 ... more- SOUTH BEND lathe. Very strong thing, with excellent feel in your hand. Super strong solid and very well balanced.
$
24.95
Buy It Now
$3.99 Shipping
Condition: Used
Location: Los Angeles, United States
South Bend Lathes Catalog No. 89-A, 1928. Near fine softcover. 
$
60.00
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown, United States
Good fit for Southbend Atlas Craftsman Logan Grizzly Jet Etc.
$
34.99
Buy It Now
$3.85 Shipping
Condition: Used
Location: Nashville, United States
As shown, good threads & keyway.
$
6.97
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
Lathes Catalog 5422. 10 Pages -. Works great on Your phone, ipad, Lenovo. Loaded with illustrations, instructions, photos, and diagrams. Nothing flashy, ... morejust all the information you Need.
$
56.39
Buy It Now
$124.05 Shipping
Condition: For parts or not working
Location: Dayton, United States
Manufacturer: M & J TOOLING LLC. SOLD BY M & J TOOLING LLC. M & J TOOLING LLC. LOCATION: WB13-1-3-3. / LABELING FOR PARTS OR NOT WORKING. PRODUCT SPECIFICATIONS ... moreAND / OR LABELING.
$
6.00
Buy It Now
Condition: Used
Location: Highland Mills, United States
Up for sale is an original 1919 South Bend Lathes Print Ad.
$
25.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
Hardinge 3AT Collet 3/32” Lathe Logan Atlas Craftsman South Bend Headstock. look at all pictures for the full description of the item comes exactly as ... moreshown in pictures free shipping to the lower 48 United States international shipping available please contact before making final purchaseUSPS FIRST CLASS MAIL
$
60.60
Buy It Now
Condition: New
Location: Saint Charles, United States
For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back ... moreplate more concentric with the lathe spindle and reach chuck's TIR.
$
499.99
Buy It Now
$22.75 Shipping
Condition: New
Location: Baltimore, United States
Engraving service. COOL STUFF IS COMING! STAY TUNED! You can choose the type/shape of the handle. Excellent feel of the handle. This will be a custom ... moreorder (commission work) for you! If you choose this design:No problem, you've got it.
$
325.00
Buy It Now
$72.55 Shipping
Condition: Used
Location: Dekalb, United States
CL SE Wood. 6 1/2" Center of V to edge.
$
48.98
Buy It Now
$5.30 Shipping
Condition: Used
Location: Roanoke, United States
Up for sale is Parts List No. Contains 19 pages. Condition as seen in photo.
$
44.74
Buy It Now
$14.03 Shipping
Condition: New
Location: Canada
This sale is for ONE NOS (new old stock) USA MADE EVEREDE LATHE BORING BAR 7/8" diameter by 11" long, 30° Boring Bar,Designed for Boring to a Shoulder, ... moreTool Bit size 1/4",EVEREDE ® Lathe Boring Bars are especially designed for small to medium sized Engine Lathe use.
$
38.00
Buy It Now
$7.99 Shipping
Condition: Used
Location: Haslett, United States
Lathe Change Gear 52 B - Very good condition.5695" Thick. If you need more info just ask. Condition is "Used". 3.3675" Dia.
$
129.99
Buy It Now
$16.65 Shipping
Condition: New
Location: Baltimore, United States
Demolition Tool or Fish/Tire Thumper. The tool head is mounted on a custom handle, made from a kiln dried white ash piece of lumber on my "state of the ... moreart" 2014 - SOUTH BEND lathe. Very strong thing, with excellent feel in your hand. Super strong wood with nice grain.
$
15.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
The manual has about12 pages. South Bend Lathe Flat Belt Splicing Instructions. Laced Belt Splice. Hooked Belt Splice. About this manual : This is a high ... morequality reproduction manual which has been scanned with a high resolution scanner.
$
9.91
Buy It Now
$7.48 Shipping
Location: BLACKWOOD, United Kingdom
This stunning collection contains books relating to Lathes & Lathe Work. Training in Wood-work - Consisting of Three Parts; Carpentry, Wood-turning and ... morePattern Work - J. M. Tate (1902). Patternmaking, a treatise on the construction and application of patterns, including the use of woodworking tools, the art of joinery, wood turning - J. Shelly (1920).
$
29.99
Buy It Now
$5.30 Shipping
Condition: New
Location: Lima, United States
Great for the pen turner who wants to trim the brass inner tube or make his own tubes from bulk tubing! Custom cue makers have found this to be a great ... moreitem! Placing off-center holes in your projects while held in your lathe's chuck and using a drill bit in the moto-tool is easier than moving it to the drill press and having to do a set up again!
$
17.95
Buy It Now
$4.99 Shipping
Condition: Used
Location: United States
Original Elgin Tool Wks 5C 15/32 Collet, fits South Bend Heavy 10" 10L Or Logan 11". Stamped with "Elgin Tool Wks 5C 15/32".
$
89.50
Buy It Now
Condition: New
Location: Saint Charles, United States
Mounting Thread Size: T=1-1/2-8 TPI. Fully machined back plate can be mounted onto 8" 4 jaw self Independent chuck (p/n 202-5421). The size of back plates's ... moreD1 should be a little bit smaller than the size of Chuck's D1.
$
46.99
Buy It Now
$5.99 Shipping
Condition: Used
Location: Georgetown, United States
1941. Vintage, South Bend 9_inch"Workshop" precision lathes Catalog, with some additional leaflets/brochures, Excellent condition, see all photos ... morefor details. SHIPS TO U.S. ONLY
$
75.00
Buy It Now
$25.25 Shipping
Condition: Used
Location: Runnemede, United States
, Works, I cranked the Jaws in.
$
28.00
Buy It Now
$15.00 Shipping
Condition: New
Location: Canada
New Caporali 1/8" Square 4C Old Style South Bend Heavy 10 Lathe Collet. Made in Italy Please See additional Pictures Below the Description.
$
109.00
Buy It Now
Free Shipping
Condition: Used
Location: Farmingdale, United States
Plate is 1/2" thick and the plate + the hub + is 1 3/8" thick.
$
19.99
Buy It Now
$3.85 Shipping
Condition: Used
Location: Nashville, United States
As shown, good threads & keyway.
$
19.99
Buy It Now
$3.85 Shipping
Condition: Used
Location: Nashville, United States
As shown, good threads & keyway.
$
19.99
Buy It Now
$3.85 Shipping
Condition: Used
Location: Nashville, United States
As shown, good threads & keyway.
$
66.45
Buy It Now
Condition: New
Location: Saint Charles, United States
Fully machined back plate can be mounted onto 6" 3 jaw or 4 jaw self centering lathe chuck (p/n 202-5433, 202-5411,202-6188, 202-5473). The size of back ... moreplates's D1 should be a little bit smaller than the size of Chuck's D1.
$
929.99
Buy It Now
$102.53 Shipping
Condition: Used
Location: Yorktown, United States
L-00 mount Hardinge Sjogren speed Lever chuck for 5C collets. You will have to make a bracket to clamp the pivot bar to your lathe so that the arm can ... moreopen and close the collet with pulling/pushing motion off the pivot point.
$
29.00
Buy It Now
$17.50 Shipping
Condition: Used
Location: Buffalo, United States
P/N PT2576R1. CAT # CL187 YB. SOUTH BEND 10" BENCH TOP LATHE. CONE COVER. PARTS ARE FROM.
$
45.00
Buy It Now
$15.40 Shipping
Condition: New
Location: Baltimore, United States
Custom made steel Ice Pick that has been cut to size, sharpened and mounted on a custom mirror polished aluminum handle. The ice pick is totally custom ... moremade on my 2014 - SOUTH BEND lathe. Very strong thing, with excellent feel in your hand. Super strong solid and very well balanced.
$
39.99
Buy It Now
$9.65 Shipping
Condition: New – Open box
Location: Las Vegas, United States
These jaws are new and in the original plastic pouch. Jaw Width: 0.432"Jaw OAL: 1-1/2". Jaw Number: D 197.
$
13.00
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
I have a large selection of 5C collets. Do we scrap anything?. Not usually. With that being said I don’t every last detail about the types. If you would ... morelike more detailed photos I would be happy to take more for you.
$
135.00
Buy It Now
$48.69 Shipping
Condition: Used
Location: Caledonia, United States
8-5/8" L0 L-O LATHE DRIVE PLATE, #28698. NICE CONDITION, BALANCED, NO HOLES.
$
100.50
Buy It Now
$23.00 Shipping
Condition: New
Location: Saint Charles, United States
For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
24.99
Buy It Now
$5.30 Shipping
Condition: New
Location: Lima, United States
Great for the pen turner who wants to trim the brass inner tube or make his own tubes from bulk tubing! Custom cue makers have found this to be a great ... moreitem! Placing off-center holes in your projects while held in your lathe's chuck and using a drill bit in the moto-tool is easier than moving it to the drill press and having to do a set up again!
$
20.99
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
Hardinge 3C Lathe Collet Atlas, South Bend 9" 3C 1A. look at all pictures for the full description of the item comes exactly as shown in pictures free ... moreshipping to the lower 48 United States international shipping available please contact before making final purchaseUSPS FIRST CLASS MAIL
$
125.00
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown, United States
52 53 54 55 56 57 58 59 60 61
 In 

Past Items  
 
This is a South Bend threaded face plate. 8 1/2 inches in diameter, 1 1/2- 8 threaded mount. Excellent condition, south bend part number TFP-100N. Powered by The free listing tool. List your items fast and easy and manage your active items. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14b8a882c73-0x10e-
Here is a very nice South bend 9 or 10K model A belt cover in very good condition ready to use. Sipping is for lower 48 states and Canada. Please pay at same time you buy.
This is a South Bend lathe tool bit grinding fixture. This fixture has attachments for four different size bits(3/8" 5/16" 1/4" 3/16" In good condition. Except for a few grind marks on the one end, which don't effect the operation. Allen wrench included. Free expedited shipping to U.S. Thanks.
13" SOUTH BEND LATHE 5' BED W/ 28" CENTERS D1-4 SPINDLE TAPER ATTACHMENT INCLUDES: LARGE DIALS TAPER ATTACHMENT 6-1/2" CUSHMAN 3-JAW CHUCK WITH TWO SETS OF JAWS 7-1/2" CUSHMAN 4-JAW INDEPENDENT CHUCK 10" FACE PLATE ROCKER STYLE TOOL POST THREAD DIAL LIVE CENTER(LIKE NEW) CHUCK WRENCHES AND TAILSTOCK WRENCH 2 HP. 208-230/460 3PH VOLT MOTOR AND MAGNETIC STARTER(WIRED 230V) SPECIFICATIONS: MODEL#CLC1458 CAPACITY: 13" X 28" BED LENGTH: 5' SWING OVER BED: 13-1/8" DISTANCE CENTER-TO-CENTER: 28-30" CROSS SLIDE TRAVEL: 8-3/4" SPINDLE TYPE: D1-4 SPINDLE HOLE: 1-3/8" SPINDLE TAPER: 3 MT SPINDLE SPEEDS: 40-940 RPM TAILSTOCK TAPER: 3 MT TAILSTOCK SPINDLE TRAVEL: 4-1/4" COLLET CAPACITY: 1" TAPER ATTACHMENT TAPER IN INCHES: +- 4 CROSS FEEDS(48) 0006"0315" LONGITUDINAL FEEDS(48) ... more0015"0841" THREAD PITCH(48) 4-224 TPI COMPOUND SHOWS CHUCK SCARS WITH BUT OTHER THAN THAT. THIS LATHE IS IN GREAT CONDITION! PRICE $3.950.00 FOR SINGLE PHASE JUST ADD A PHASE CONVERTER AND YOU HAVE THE ABILITY TO REVERSE YOUR SPINDLE QUICKLY. APPROX. WEIGHT: 1600 POUNDS APPROX. FLOOR DIMS: 68"x36"x52" I CAN LOAD THIS MACHINE ON YOUR TRUCK OR TRAILER. I WILL SHIP. CONTACT PRIOR TO PURCHASE FOR ADDITIONAL COST OF SECURING TO PALLET OR SKID AND WRAPPING. SHIPPING COST IS RESPONSIBILITY OF PURCHASER.
As shown in pictures
Armstrong. No. 2-R lathe tool holder. Inside measures.400 Shank is 1 1/4"x3/4" Thanks for looking! Please watch for my other listings. Including South Bend lathe items, milling machines, lathe tools, machinist tools. Look at the pictures, you get exactly what you see in the pictures! thanks again!
This is a Dayton 1/2 HP motor 115/230v. single phase. 1725 RPM, 1/2 shaft, reversible, 56 frame 3/4 shaft, many south bend lathe motor pulleys use a 3/4 shaft. runs perfect. Powered by The free listing tool. List your items fast and easy and manage your active items.
UP FOR SALE IS THIS Vintage 42nd Edition South Bend Lathe Works- How To Run A Lathe book IN NICE CONDITION WITH SIGNS OF USE AND WEAR. PLEASE ASK QUESTIONS BEFORE YOU BID. THE BUYER WILL PAY 4.95 FOR PACKING AND SHIPPING TO THE LOWER 48 VIA USPS PRIORITY. THANKS FOR LOOKING!
A very nice quick change gearbox. The paint leaves a bit to be desired. And the label is badly worn, though still readable. There is no visible damage, and I have run this gearbox without having any difficulties or hearing any noises. This was removed from a 4.5' bed(it says that on the label) And that leadscrew will be offered for sale in future. This gearbox also comes with the leadscrew gear and nuts. As well as the three mounting screws. All these items are shown in separate pictures.
An estate sale find. I believe this to be a south bend lathe belt guard. Apparently this guy had a metal working hobby. I found this in the basement with some other thing I am listing tonight. Thanks for looking.
DONT KNOW MUCH ABOUT IT WAS SUPPOSED TO BE WORKING WHEN TAKING OUT OF SERVICE.NOT 100 PERCENT SURE,FEEL FREE TO INSPECT IN PERSON PLEASE,DONT WANNA MISLEAD ANYBODY ON WORKING OR NON WORKING ITEMS OR PARTS ON THIS LATHE,THANKS.MAKE A SERIOUS OFFER IF YOUR A SERIOUS BUYER,ITEM SPECIFICS ARE NOT CORRECT TRYING TO REVISE WITH CORRECT THANKS
SOUTH BEND 9” LATHE C* TAIL STOCK WITH MT2 DEAD CENTER CONDITION: Used/ See Photos/ Normal Wear and Tear Good Working Condition: Owner Markings: NO*ALL CUTTING TOOLS ARE NOT COATED UNLESS OTHERWISE SPECIFIED* Click Here to Check out my EBay Store Please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used and most times it is. Should there be a shipping difference of more than $.50 that money will be immediately refund. Please e-mail with questions 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14b8f3fb64a-0x10b-
South bend lathe stand base cast iron plate steel top. Large drip pan on top wooden base on bottom. Freight would be an ideal shipping. Should be 150. If you can get to a forward air terminal to pick up or if you can have it delivered to a place with a dock or forklift. Tailgate service is an option for another $75
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. South Bend micrometer lathe carriage Stop made into one for an Atlas lathe. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for ... morecombined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL
South Bend 9 inch Lathe TELESCOPING STEADY REST and Very Good original condition with no cracks breaks or repairs. Upper casting marked PT116NR1 Lower Casting PT116N1.
This is a nice shift gear for a vintage South Bend heavy 10 lathe. This gear may fit the 9" 10L. But I'm not sure. This gear is in VG condition and has no chips. Free shipping to U.S.
SOUTH BEND 9” LATHE C* REVERSE LEAVER AND GEARS CONDITION: Used/ See Photos/ Normal Wear and Tear Good Working Condition: Owner Markings: NO*ALL CUTTING TOOLS ARE NOT COATED UNLESS OTHERWISE SPECIFIED* Click Here to Check out my EBay Store Please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used and most times it is. Should there be a shipping difference of more than $.50 that money will be immediately refund. Please e-mail with questions
SOUTH BEND 9” LATHE C* GEARS(32* 80* 54* 72) CONDITION: Used/ See Photos/ Normal Wear and Tear Good Working Condition: Owner Markings: NO*ALL CUTTING TOOLS ARE NOT COATED UNLESS OTHERWISE SPECIFIED* Click Here to Check out my EBay Store Please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used and most times it is. Should there be a shipping difference of more than $.50 that money will be immediately refund. Please e-mail with questions
SOUTH BEND 9” LATHE C* HEAD STOCK MAIN DRIVE ASSEMBLY CONDITION: Used/ See Photos/ Normal Wear and Tear Good Working Condition: THE SPINDLE IS WORN(SEE PICTURES) AND IS INCLUDE TO COMPETE THE ASSEMBLY. THE SPINDLE IS SOLD AS IS WITH NO WARRANTY. THE OTHER PARTS CAN BE RETURNED IF NOT COMPLETELY SATISFIED. IF YOU DO NOT WISH THE SPINDLE TO BE SHIPPED THEM LET ME KNOW AND I CAN REDUCE THE SHIPPING. Owner Markings: NO*ALL CUTTING TOOLS ARE NOT COATED UNLESS OTHERWISE SPECIFIED* Click Here to Check out my EBay Store Please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used and most times ... moreit is. Should there be a shipping difference of more than $.50 that money will be immediately refund. Please e-mail with questions
Up for auction today is a South Bend lathe. 10 L heavy. It was purchased from up private owner who passed away a couple years ago. The lathe is currently being used for gunsmithing and works perfectly, except for the threading screw. It’s believed that a roll pin or gear has broken that operates the threading portion of the lathe. See the pictures below. The Gray Cabinet is included. No shipping options are available the lathe must be picked up at Law Weapons Inc. located at 801 East Ogden Ave. in Naperville. IL 60563. Prospective buyers are welcome to come out and look at the lathe. It is plugged in an operational. There is no reserve on this auction. The unit must be picked up within five days of the end of auction to make room for a new lathe being installed. For questions contact us at 630-317-7155. Normal 0 false false false EN-US X-NONE ... moreX-NONE
South Bend 9 inch Lathe Model A TAILSTOCK with Clamp and bolt. Requires a clean up and has light surface corrosion. But runs smoothly and snug without wear0 very good bore.
5) drill chucks. LFA 0-5/16"Jacobs 1A 0-1/4"jacobs 0-1/4" threaded,supreme 1/16"3/8" and jacobs 1A 0-1/4" 4 have keys and 1 doesn't.
Original South Bend 48 tooth change gear for a 9" 10K South Bend lathe. Single keyway. 9/16" bore, 3/8" thick. Outer diameter is 2-3/4" 18 DP. This item is in very good condition. I accept payment by PAYPAL only. FREE SHIPPING by my choice of either USPS Priority Mail. USPS First Class mail, UPS or FedEx Ground. I will ship to continental lower 48 United States only. STANDARD TERMS FOR ALL OF MY AUCTIONS: If you are bidding you understand and agree that the item you are bidding on was acquired by me as part of a larger lot. When I acquire a large lot I do not get documentation. Warrantees or specific information concerning the condition or quality of the items. I acquire many different types of items and I am not an expert or even knowledgeable about the item's use. My descriptions and answers to questions are based ... moreupon by best efforts. When you receive the item, prior to its use you are responsible to thoroughly understand and inspect it to determine if it is suitable for your purposes. I try to ship out all items in less than 3 working days. Sometimes it may take me extra time, like for larger items that need a special box or items that need extra foam padding. If you have any questions email me. I will answer all. Thanks for looking.
Original South Bend 36 tooth change gear for a 9" 10K South Bend lathe. Single keyway. 9/16" bore, 3/8" thick. Outer diameter is 2-1/16" 18 DP. This item is in very good condition. I accept payment by PAYPAL only. FREE SHIPPING by my choice of either USPS Priority Mail. USPS First Class mail, UPS or FedEx Ground. I will ship to continental lower 48 United States only. STANDARD TERMS FOR ALL OF MY AUCTIONS: If you are bidding you understand and agree that the item you are bidding on was acquired by me as part of a larger lot. When I acquire a large lot I do not get documentation. Warrantees or specific information concerning the condition or quality of the items. I acquire many different types of items and I am not an expert or even knowledgeable about the item's use. My descriptions and answers to questions are based ... moreupon by best efforts. When you receive the item, prior to its use you are responsible to thoroughly understand and inspect it to determine if it is suitable for your purposes. I try to ship out all items in less than 3 working days. Sometimes it may take me extra time, like for larger items that need a special box or items that need extra foam padding. If you have any questions email me. I will answer all. Thanks for looking.
Feed set gear set for 14 1/2" South Bend lathe. PAYMENT Payment must be made via pay pal within 3 days of winning bid. If payment is not made by the 3rd day. An unpaid case will be filed with eBay. Please note that I only ship to the United States. Thanks for looking!
9" South Bend Lathe 24" between centers Serial no. 72660. Model year 1937 1/2 HP 110V single phase motor Forward/reverse switch Low and high spindle range 1942"How to use a Lathe" instruction book Model C. No power cross feed, no quick change thread gearbox Threads and feed is controlled by changing back gears. Equipped with thread counting dial. Includes: Heavy duty workbench with drip pan and 2 drawers Back gears Steady rest Dead and live centers 6" 4-jaw chuck 5" 3-jaw chuck 5" heavy duty 3-jaw chuck 5" faceplate 4 dogs Selection of: Files Wrenches OD& boring bar holders Part off tool Knurl tool HSS and brazed carbide tool bits 2 Jacobs drill chucks Mist and air sprayer Dial indicator and magnetic base Craftsman Power Hacksaw. With rolling stand Model 108.22940 1/4 HP 110V single phase motor ... more3 new Starrett saw blades PLEASE NOTE: This is for sale locally and I will end the sale here if/when it sells. Thank you for looking!
South Bend Heavy 10" lathe face plate in used condition. The face plate has 2 1/4"8 tpi threads to fit South Bend 10L Heavy 10 lathes. 5 1/2" diameter. Comes as shown.
Union brand 6" diameter four jaw independent chuck has 1 1/2"8 tpi threads. Includes key. PLEASE SEE MY OTHER LISTINGS FOR MORE MACHINIST TOOLS. The pictures show all that is included and the condition of the item so please look carefully. I take the best photos my camera will allow me to take. If you have any questions. Please do not hesitate to email me first before buying the item. Please see the photos for the best description. 14 DAY MONEY BACK RETURNS. BUYER PAYS RETURN SHIPPING! all items subject to a 25% RESTOCKING FEE. If there is a problem with your purchase, please email me. I answer all emails and will try to work with you the best I can. I WILL NOT BE BULLIED OR BLACKMAILED! THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF THE ITEMS PRICE OR CLAIM ITEMS ARE NOT AS DESCRIBED TO GET THERE WAY. IF YOU ARE ONE ... moreOF THESE PEOPLE, I DON'T WANT YOUR BUSINESS!
A pair of oilers in good condition.
This is the 56 tooth gear that goes on the gearbox shaft in the headstock geartrain of a 10K Model A South Bend lathe. It may fit others. It has surface discoloration. But all the teeth are in good shape.
HIDDENTREASURE4U is pleased to present to you How To Run A Lathe How To Run A Lathe by South Bend Lathe. Inc. 1958 revised Edition 55 of How To Run A Lathe The Care and Operation of A Screw-Cutting Lathes Published by South Bend Lathe. Inc. 128 pages of technical information. Instruction, diagrams and photographs. The book has wear and staining as shown to the cover. The pages inside are pretty clean given a shop envirnment that it was most likely used in. Please click on the glittering chest to see ALL our other treasures that we have up for auction and browse through our Ebay Store for fixed price instant shopping. Please email any questions you might have! SHIPPING* US Buyers Only* S/H is calculated based on your ebay registered address. California residents to add sales tax. International buyers* S/H is calculated based on your ebay registered ... moreaddress. The package will be marked"merchandise" Not gift. The declared value for customs is the purchase price without shipping. The buyer is responsible for customs taxes. Tariffs, broker fees and any other charges imposed by your country to receive your package. The postage you pay to me does not include any customs charges your country may collect. FORMS OF PAYMENT- Domestic and International Paypal with confirmed addresses is accepted for both domestic and international payments. Please contact me within 3 days of receipt of your item should there be an issues to address. Otherwise. I will consider the transaction satisfactory and accepted by customer. Payment should be received within 10 days of my email to you stating total owed unless arranged prior to bidding. If payment hasn't been received by then. I reserve the right to relist the item and begin the process to cancel the transaction. Thanks for your interest! Powered by The free listing tool. List your items fast and easy and manage your active items.
SET OF 4 ADJUSTABLE PARALLELS CONSISTS OF TWO PIECES DOVETAILED AND CAN BE ADJUSTED WITH A MICROMETER CAN BE USED AS ADJUSTABLE GAGE BLOCKS 1/4 THICK 5/8-11/16 HIGH 13/4 LONG CAN BE USED TO MEASURE HARD TO REACH PLACES BY INSERTING AND ADJUSTING THE BLOCK AND THEM TAKING THE MEASUREMENT OFF THE BLOCK HANDY FOR LEVELING WORK ON MILLING MACHINE THESE ARE GROUND FLAT HAS LOCKING SCREWS ON THE SIDE OF BLOCK OR YOU JUST USE IT AS ADJUSTABLE PARALLELS
South Bend 16" Lathe Carriage Lock and Bolt with Williams Wrench excellent condition. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14b948b671c-0x116-
South bend 9 or 10 K model A Precision lathe Quick change gear box in very good condition ready to use. Sipping is for lower 48 states and Canada. Please pay at same time you buy.
Keep Your Lathe in Trim. Bulletin H-4. South Bend Lathe Works. Reprinted by Lindsay Publications. 1994 printing of 1943 book. Softcover. 28 pages. Some light wear. Mostly to cover.
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! | HOW TO RUN A LATHE. CARE& OPERATION OF A SOUTH BEND SCEW CUTTING LATHE 1941, How to Run a Lathe. Operation of Screw Cutting Lathe. 128 Page softback book published in 1941 by South Bend Lathe Works. Very good condition. Shipping is $2.50. Click to View Image Album Click to View Image Album Payment, I accept the following forms of payment: PayPal Shipping& Handling, I will always try to consolidate multiple purchases to save you on shipping. I add a small handling fee on some items to help offset the rising price of packaging items. Please don't be offended by used shipping boxes and or packing materials. As I try to recycle as much as I can. Please contact me with any problems and we will remedy as quickly as possible. If an auction item does not sell, I usally re-list ... morewithin 2-10 days at a reduced rate of up to 50% of the original starting price. Most store item prices will not be reduced. Free shipping refers to U.S. States only. Please ask before bidding on international shipments. $2.50 USPS First-Class Mail® FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
A used. But good condition, takeup nut for the spindle of a South Bend 9 inch or 10K lathe.
22 lathe HSS lathe bits. Rex aaa. Latrobe etc. The biggest one is 3/4" square and the smallest is 7/16" See pics
South Bend 9 10K lathe tooling parts. Everything in the pic is included in the auction. I was going to restore or re-build but everything but have other projects at the moment. Thought it could use a good home. The gear change shaft. The threads are stripped. You can see it in the pic. The large dial cross slide screw, the tip is slightly bent. Those are really the only things worth mentioning. The tailstock parts are all from the same tailstock. If you have any questions, please ask. Items in this auction are sold as is and no returns. Sales are final. Thank you and good luck.
South bend 9 wide complete headstock in excellent condition. This will only fit a 9 wide or junior
Item for sale is(1) South Bend Heavy10 Metal Lathe 4-Jaw Chuck w/ Key. This lathe is an extra from a SB Heavy 10 that I sold last year. It has the larger thread mount. It will NOT fit a SB 9" Used. In very good condition. The is a crack in the rear mount(I never even noticed it until I took the pictures) it has been a good chuck, it works well. Shipped FREE in USA. Check out my! Be sure to add me to your!
ARMSTRONG THREADING TOOL NO. NS-50 3/8" X 7/8" X 6-1/4" LONG The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
Normal 0 false false false MicrosoftInternetExplorer4 5 Lathe Drive Dogs South Bend Williams Vulcan. Includes; 1-1/8” Max capacity. 1” Max capacity DA52539. 7/8” Max capacity#7 South Bend 1652NR1. 9/16” Max capacity#2 Williams Vulcan. ½” Max capacity#1 L MJ.
2) 3mt shank drill chucks. 1 is a jacobs 14N 0-1/2" and the other has no name I can see. The jacobs has teeth that are rounded at the edge only and the no name rattles(a little sloppy)
Nice- Original South Bend SBL 3/16" 6K collet for use with a South Bend 10K lathe. Some light marks noted. Threads and keyway are in fine order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14b972cd68e-0x104-
Nice- Original South Bend SBL 1/8" 6K collet for use with a South Bend 10K lathe. Some light marks noted. Threads and keyway are in fine order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Nice- Original South Bend SBL 1/16" 6K collet for use with a South Bend 10K lathe. Some light marks noted. Threads and keyway are in fine order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
South Bend 16"X60" metal lathe with tooling. Powered by 230v 3 phase 2HP motor vee belt and flat belt drive with reversing drum switch. There are 8 spindle speeds. All gears look fine. No chipped teeth observed. Catalog number is CL8117E. Acessories and tooling: 8" 3 Jaw chuck, 12" 4 Jaw chuck, telescopic steady rest, original thread dial, chip pan, 8"brazed) 13" face plates, Collet rack, draw tube collet closer with spindle adapter for 5C plus spindle protector, wrenches, live and dead centers, micrometer travel stop, crossfeed stop, headstock MT adaptor, and taper attachment. The lathe has some dinges, scratches and minor dents. There is a lip and scratches on the ways near the chuck on the ways otherwise look average for its age. The backlash is a little over 1/8 turn compound and amost none in the crossfeed. ... moreThe power feed and threading work fine. Lathe runs fine and all functions seem to work good. Spindle is threaded. Made in the USA This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Email me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction to avoid neg feedback. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified, so please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner.
workshop" early SOUTH BEND 9" LATHE#56337-carriage saddle w/cross feed screw CLICK ON THE PICTURES FOR CLOSE PICTURES.THE PICTURES USUALLY TELL THE CONDITION BETTER THAN I CAN DESCRIBE IT. off of a"workshop" SOUTH BEND 9" LATHE#56337.it has a small 201 stamped on it.dial goes from 0- 100.you can see in the pictures what comes with it.the threads on the end of the feed screw where the cranks goes look ok but may need minor thread chasing on the end. Not sure.overall nice condition with normal wear. I WILL COMBINE SHIPPING WHERE POSSIBLE PUERTO RICO. ALASKA AND HAWAII SHIPPING MAY BE HIGHER ON SOME ITEMS IF THEY ARE LARGER PLEASE EMAIL FOR PRICE INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING BUYERS ARE RESPONSIBLE FOR TAXES AND DUTY FOR THERE COUNTRY. SOMETIMES ITEMS ARE HELD UP IN CUSTOMS AND CAN TAKE A LITTLE LONGER ... moreAT TIMES TO RECEIVE YOUR PACKAGE. INTERNATIONAL BUYERS PLEASE DON'T ASK ME TO LIE ON THE CUSTOMS FORM.I WILL ONLY PUT ACTUAL SALE PRICE AND ACTUAL CONTENTS ON IT. NO EXCEPTIONS. INTERNATIONAL BUYERS ARE ALSO RESPONSIBLE FOR KNOWING IF YOU NEED AN IMPORT LICENSE FOR THE ITEM YOU ARE BUYING OR IF IT IS PROHIBITED TO YOUR COUNTRY. IF YOU HAVE A PROBLEM WITH YOUR PURCHASE. PLEASE LET ME KNOW BEFORE YOU LEAVE A NEGATIVE.IT IS BEST TO SEND A NICE EMAIL AND NOT A NASTY ONE.NICE EMAILS GET BETTER ACTION.
A nice used tool holder for 1/4 turning tools.
A used 5" face plate with 1-1/2 x 8 threads. This fits South Bend 9N and 10K lathes and possibly others.
A used end cover guard for a South Bend 9C lathe. If used on other models. The label will be incorrect. There is also a vintage label from the original machinery supplier. Shipping to US only.
A used lantern post tool holder for a South Bend 9N or 10K lathe. It has some surface rust and cosmetic dings. But remains fully functional. The slot is approximately 3/8" x 1-1/2"
Set of Right Hand. Left Hand And Straight Tool Holders For Metal Lathe. Tool Holders marked"CRAFTSMAN NO 2192 TURNING-TOOL HOLDER" and measures 3 3/4" shank, 3/8" wide, 3/4 high and has a 1/4" bit included, CRAFTSMAN NO 2196 TURNING-TOOL HOLDER" and measures 3 5/8" shank, 3/8" wide, 13/16" high and has a 1/4" tool bit included and"ATLAS L.H. TOOL HOLDER ATLAS PRESS CO KALAMAZOO USA" and measures 3 1/2" shank, 3/8" wide, 7/8" high and has a 1/4" tool bit also included. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Nice Original 8 1/2" Face plate Atlas or Craftsman 10" 12" Lathe. Can also fit South Bend and Logan lathe. 1 1/2" X 8" TPI. Faceplate measures 8 1/2" in diameter. Spindle threads are in nice condition. Part Number 9-365. Will always combine shipping when possible. Any questions feel free to e-mail. Powered by The free listing tool. List your items fast and easy and manage your active items.
South Bend 9" Metal Lathe Gear Cover Guard Door with Threading Chart& Lubrication Chart The gear cover guard and charts are in fine working condition with some wear. The charts show some wear and have some paint spray on them. See pictures. It is o ff a South Bend 9" metal lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $16.50 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me for shipping cost before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
South Bend 9" Metal Lathe Pair of 2 Headstock Gear Guards with Mounting Screws The headstock gear guards are in fine working condition with some wear. Comes with mounting screws. They are o ff a South Bend 9" metal lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $12.00 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me for shipping cost before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
DESCRIPTION: USED. MICROMETER CARRIAGE STOP. IT CAME WITH SOME SOUTH BEND TOOLING. I DO NOT KNOW IF IT'S A SOUTH BEND OR NOT. THERE'S A CASTING NUMBER ON THE BOTTOM THAT LOOKS LIKE 12-3687. THE THIMBLE MOVES FINE. THERE'S A MACHINED SPOT ON TOP WITH 2 SMALL HOLES THAT LOOK LIKE ID/NAME PLATE RIVET HOLES. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN ... moreTHE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below va
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 PRECISION MACHINIST TOOLS. ITEM DESCRIPTION: THREE JAW KEYLESS CHUCK SOUTH BEND ATLAS SMALL SIZE MACHINIST JEWELERS LATHE TOOL BACK OF PLATE ROTATES/ TURNS TO ADJUST JAWS. CONDITION: OBVIOUS SIGNS OF WEAR& USE. LOOKS TO STILL BE IN GOOD WORKING CONDITION. UP FOR AUCTION*PICTURES ARE THE BEST REPRESENTATION OF CONDITION. WE TAKE THE BEST PICTURES POSSIBLE. PLEASE ZOOM IN CAREFULLY SO YOU KNOW WHAT YOU ARE PURCHASING* WE HAVE A LARGE ARRAY OF MACHINIST TOOLS FOR SALE! PLEASE LOOK AT OUR OTHER LISTINGS: Business. Industrial Tools: METAL WORK TOOLING PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. WE LOVE SELLING ON EBAY AND TAKE OUR JOB SERIOUSLY WE HOPE OUR CUSTOMERS WILL DO THE SAME. Read through the listing. We try to be as thorough as possible. NO ... moreRETURNS WILL BE ACCEPTED ON THIS ITEM! CHECK OUT OUR EBAY STORE WE ADD COLLECTABLE& INTERESTING THINGS EVERYDAY! Click here for our other items! SHIPPING: I WILL PUT MULTIPLE PURCHASES IN ONE BOX. SHIPPING IS DONE THROUGH USPS. UPS, FEDEX OR GREY HOUND FREIGHT. SINCE WE PAY A% OF THE SHIPPING COST, WE ALWAYS CHOOSE THE LEAST EXPENSIVE METHOD FOR EACH PURCHASE. ALL PRICING IS DONE THROUGH THEM. EXTRA OR SPECIAL PACKING COSTS TO BUYER WILL BE CLEARLY STATED IN THE ABOVE LISTING. PLEASE WAIT UNTIL INVOICE HAS BEEN RECEIVED. CONTACT ME DIRECTLY WITH ANY QUESTIONS AFTER YOU PURCHASE AN ITEM. WE DO EXTREMELY GOOD PACKING JOBS FOR ALL OUR MERCHANDISE WE SELL. LOOK AT OUR EBAY FEEDBACKS. IF YOU DO NOT WANT TO PAY SHIPPING, TAX OR ANY OTHERS COSTS YOU CAN PICK IT UP, BOONTON, NEW JERSEY. WE SHIP OUT. ON AVERAGE 2 DAYS AFTER YOU PAY! EXCEPT IF YOUR LISTING ENDS THURSDAY THROUGH SUNDAY OR HOLIDAY IT WILL SHIP ON THE NEXT WORKING DAY.
A used set of headstock gear covers. These do not have the plunger swinging cover. They have some cosmetic dings. And some ratty paint, but are in good shape.
A used thrust bearing for the headstock(inside. Next to the cone pulley) of a 9 inch or 10K South Bend lathe. It has obviously seen use, but appears still useable. I feel no roughness and see no damage other than cosmetic discoloration. NOTE: THE ONLY OIL ON THIS BEARING IS THE WD-40 TO PREVENT RUST. YOU MUST LUBRICATE THIS PROPERLY BEFORE USING. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14b9dce0bdc-0x10b-
We are now offering 6 Loose Change Gears for the 9 inch South Bend Lathe. They are 40 tooth. 46, 48, 54, 56, and 60 tooth gears. They are all in great used condition. All the teeth are accounted for. There are no repairs. Pay Pal will start shipping process the same day received. This will ship for $5.95 with USPS Flat Rate Small Box. Thanks for looking
Here is a very nice South bend 9 or 10 K model A apron lock ready to install.Please look at the pictures. Sipping is for lower 48 states and Canada. Please pay at same time you buy.
Furnas Drum Type forward reverse motor switch for lathe or other machines This switch made exclusively for South Bend Lathe Works by Furnas electrical company in Chicago Illinois U.S.A. 110-220 volts AC 1HP Switch was removed from a running machine Any questions please ask Thanks for looking
Antique book'How to Run a Lathe' by South Bend Lathe Works. Copyright 1930. 29th Printing. Complete, original and intact. Slight wear/tear at edges and binding. Some pages are stuck together and ripped in the center of the book. Thanks for looking, any questions, please email.
Vintage 7/16" Armstrong square wrench. Some green paint still on it. See pictures. Sold as-is.
MT2 Supreme chuck for an Atlas. Craftsman or South Bend Metal Lathe. Chuck is stamped with" SUPREME H15T33 CHUCK CHICAGO 0-1/2 CAP. Arbor measures approximately 3 1/4" long. Includes key. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Nice- Complete set of original back gear adjusting hardware for a 9" or 10K South Bend lathe. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
South Bend 9" Metal Lathe Saddle Crossfeed Screw Graduated Dial The graduated dial is in fine condition with some wear. The dial indicator markings are legible with some wear. A few of the indicator marks are worn between the 20 and 30 marks on the dial. See pictures. It is o ff a South Bend 9" Model A metal lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $4.00 for USPS 1st Class Mail with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me for shipping cost before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
This lathe will need to be picked up in Goodland Indiana. This 1308 south Bend lathe was retired from service in the shop where I work Due to its poor condition.It was being used to make parts right up to the day we unplugged it a couple of months ago.This Lathe was purchased new in the mid 1980's and was used heavily in a tool room environment. It would be good for parts or repair or could be used as is by a hobbyist that did not need to hold really tight tolerances It comes with a live center 3 Jaw 8 inch chuck and a 10 inch 4 jaw chuck. NO COLLETS OR COLLET ATTACHMENT PARTS ARE INCLUDED* It has heavy grooving in the bed ways(see pics) It leaks oil from the apron due to a missing rubber boot no longer available from South Bend* The gear on the thread dial is heavily warn requiring the half nuts to be left engaged when threading* Most ... morereplacement parts for this machine are no longer available from South Bend
Nice south bend spindle from a 9" lathe. Threads in great shape and there is no scoring that can be felt. See pics
3 lantern tool holders. 1/4" wide x 3/4" tall The craftsman unit has been repaired with a weld Please see pics
Jacobs headstock chuck. 59b Owner ground square sides on it for a wrench. No chuck key Works fine See pics
South bend lathe carriage saddle lock with wrench For a 9 a. B,c or 10k lathe See pics
This is a SOUTH BEND Model A Quick Change Gear Box. It has been used and the gears need a good cleaning& lube job. A side from that. This unit looks to be in decent condition. Feel free to send us any questions that you may have. Shipping: $20.00 LOC: F 1
16" South Bend Lathe Steady Rest with Bed Clamp very nice condition.
Aloris bx7 cut off tool holder
Nice- Lot of three(3) MT2 60 degree dead centers. Measure 3 3/4" 4" and 4" All in good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
This bid is for a vintage 1958 editon of How To Run A Lathe by South Bend Lathe Inc. Good complete condition with 120 pages. Shows a little soiling. Winner pays $4.00 Media mail shipping
Up for auction today is a nice condition indexing tool post for a lathe. It is 3 3/16" square. It holds tool bits up to 3/4" square. It measures 1 7/8" from the bottom to the center of the tool slots. The handle has been repaired. The"t" nut is perfect for a Nardini 1440 but will work on others or maybe modify the"t" nut. The"t" nut is 1/2" tall with a 1/4" step and is 3 1/4" long. If you win multiple items. I will combine shipping, and send a revised invoice after auctions are over. If you think the shipping price is too high, please email me for a shipping quote. Ebay has really changed their system, and forces us to put in weights, and sometimes the shipping prices that show up on the page are too high. Thanks for looking*
Up for auction today is a very nice condition 9" diameter 4 jaw chuck for a lathe. It is a South Bend chuck made by Skinner Chuck Co. It is a part number 4209-48. It has the D1-4 camlock backplate. The jaws move independently and are reversable. Comes with chuck key. If you win multiple items. I will combine shipping, and send a revised invoice after auctions are over. If you think the shipping price is too high, please email me for a shipping quote. Ebay has really changed their system, and forces us to put in weights, and sometimes the shipping prices that show up on the page are too high. Thanks for looking*
Item for sale is(1) pair of(2) Faceplates that fit a SB Heavy 10. These are extras from a Southbend Heavy 10 that I sold last year. It has the larger thread mount. It will NOT fit a SB 9" Used. In good condition, there is some light rust that will need to be cleaned off. Shipped FREE in USA. Check out my! Be sure to add me to your!
Item for sale is(1) 4-Jaw Chuck w/ Key. This chuck is an extra from a Southbend Heavy 10 that I sold last year. It has the larger thread mount. It will NOT fit a SB 9" Used. In very good condition. It has been a good chuck, it works well. Shipped FREE in USA. Check out my! Be sure to add me to your!
9" South bend Solid Style. Solid jaws. Slight damage to one but plenty to dress again. This fit on the bed of my 9" on the inner, small V. However as you can see it was obviously modified/cut to fit another lathe as well. Sold all my South Bends so off go the accessories! Sold as is. No Reserve! Please ask all questions prior to bidding. Flat rate shipping. Will combine items at $1 per additional item(subject to shipping in same size box quoted) All Items as is. Payment due within 7 days of auction close. Thanks!
9" South bend Hinged Style. Solid jaws. Used many times. Clean, some original paint. Ready to go. Sold all my South Bends so off go the accessories! Sold as is. No Reserve! Please ask all questions prior to bidding. Flat rate shipping. Will combine items at $1 per additional item(subject to shipping in same size box quoted) All Items as is. Payment due within 7 days of auction close. Thanks!
9" South bend Lever Tail Stock. I used this on my 9" almost all the time I had the lathe. It sold with the standard tailstock at their preference. But this is a great item. I didn't do a lot of work in centers, so this is a MUST HAVE for lots of drilling. There is light wear on the ways, but not bad. Alignment was good on my previous lathe, obviously varies to different lathes. These feature a front and rear lock that allow you to use it with the lead screw like a standard tailstock. Slight marks in the taper, but I rarely if ever had a loose morse taper fit. Once you use one of these, you'll never go back. Nice item. Sold all my South Bends so off go the accessories! Sold as is. No Reserve! Please ask all questions prior to bidding. Flat rate shipping. Will combine items at $1 per additional item(subject to shipping in ... moresame size box quoted) All Items as is. Payment due within 7 days of auction close. Thanks!
9" South bend Gears. There is a good amount here. But I wouldn't call it a complete set. Sizes: 100, 80 with hub, 72 pinned to an 18, 60, 56, 54, 52, 48, 46, 44, 40, 36, 32, 28, 26, 24, 22, 2- 20's, 18, 16. All are dirty/greasy but not rusty. Need cleaning. Used but do not look worn and do not see any major damage. Sold all my South Bends so off go the accessories! Sold as is. No Reserve! Please ask all questions prior to bidding. Flat rate shipping. Will combine items at $1 per additional item(subject to shipping in same size box quoted) All Items as is. Payment due within 7 days of auction close. Thanks!
Nose adaptor and 1 Large collet. 1 1/2"8 thread for cup collets. Marked"6" is appears. The collet is to be machined it seems and has a semi-solid stub sticking out. Sold all my South Bends so off go the accessories! Sold as is. No Reserve! Please ask all questions prior to bidding. Flat rate shipping. Will combine items at $1 per additional item(subject to shipping in same size box quoted) All Items as is. Payment due within 7 days of auction close. Thanks!
Hand wheel collet closer for 9" South Bend. Complete setup. Threaded nose cover is somewhat worn for the spanner. But I always used it. Could drill a new hole. Spanner is new. Collets are South Bend or Rivett. Sizes: 1/16, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16 and 3- 1/2. Collets are a must have for any lathe. Good Threads. Dirty, but ready for use. Sold all my South Bends so off go the accessories! Sold as is. No Reserve! Please ask all questions prior to bidding. Flat rate shipping. Will combine items at $1 per additional item(subject to shipping in same size box quoted) All Items as is. Payment due within 7 days of auction close. Thanks!
This is an arbor that was given to me that could be used on a 9" South Bend or other lathe with 1 1/2"8 threads. It has a 5/8" Arbor with no key. Needs a little cleaning. But a nice piece. Can't tell if it's a brand name or home built, but nice finish(other than the slight tarnish) Sold as is. No Reserve! Please ask all questions prior to bidding. Flat rate shipping. Will combine items at $1 per additional item(subject to shipping in same size box quoted) All Items as is. Payment due within 7 days of auction close. Thanks!
Yuasa boring head with 3/4" straight shank. Nice condition
ARMSTRONG TYPE NO 20 LATHE CUT OFF TOOL HOLDER ATLAS LOGAN SOUTH BEND CRAFTSMAN! This is a Cut-Off Tool made by J H Williams Co. It is a N-20-RH Homecraft model. It has an Armstrong Blade. Blade needs to be sharpened. 1/8" Cutting Blade! Please ask questions! I ship ASAP via USPS or FedEx! Please check out our store for more great items!
Original South Bend 9 10K Metal Lathe Change Gear 40T 40 Tooth in excellent working condition. Bore is 9/16" and is 3/8" thick with 1/8" keyway This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine. All the items I sell are shipped in a box not a envelope where the item can be damaged during shipping. And I ship within 24 hours I dont just print the label and wait 3 or 4 days to take it to the post office or UPS. As you can see I buy almost as much as I sell on Ebay.
Vtg 20s SOUTH BEND LATHE ADVERTISING LOT catalog brochure original letter works VINTAGE 1920s CORRESPONDENCE LETTER FROM SOUTH BEND LATHE WORKS. Original letterhead from 1925 complete with quote for purchasing a lathe. Includes payment plan booklet No. 24(march 1925) Circular no. 21, 2) return envelopes, customer reviews for payment plan, questonnaire(with letterhead) and(4) full page spec pages(Illustrated) Ephemera folded to envelope size. Excellent condition. Rare pieces. Ref MS4287-bb389 Please feel free to ask any questions. Local pickup available in Harrisburg. PA.