|
Southbend South Bend Lathe, Taper Attachment, 9 Inch, Complete, NICE, LOOK!!
Up for auction I have a South Bend Taper attachment for a 9 inch lathe. This is from my personal shop. Used very rarely by me only for the last 30 years. NOT abused. Damaged, cracked, bent, or in any other way not 100% It is all there, includes everything you see in the photos, including gibs, cross-feed lock, bolts, etc. I don't need this any more, perhaps you do. These attachments are a much neater and faster way to do tapers than by swinging the compound and you can do tapers up to the capacity of your lathe bed in one continuous cut. REAL nice shape. Don't miss a great opportunity if you need one! SHIPS TO US ONLY TO US REGISTERED BUYERS ONLY-NO EXCEPTIONS. Buyer will pay UPS Ground shipping on a well packed 37 lb. package. PLEASE look at the photos carefully. You will receive exactly the item that is pictured, and PLEASE, if ... moreyou have ANY questions ask so that everyone can be satisfied. Thanks for looking. Good Luck, and GOD BLESS THE USA!
|
|
|
Aloris BXA tool post and holders,south bend lathe,logan lathe,sheldon lathe
Aloris BXA tool post and 7 holders. 2) bxa2 facing and turning holders.Bxa4 boring bar holder,bxa7 cut off holder,bxa8 threading tool,bxa6 extra deep holder and bxa16 carbide insert tool holder Posted with
|
|
|
PRATT & WHITNEY CO. 15” MACHINIST LEVEL .0005” PER FOOT...SOUTH BEND LATHE
PRATT& WHITNEY CO. 15” MACHINIST LEVEL.0005” PER FOOT.SOUTH BEND LATHE Beautiful Pratt& Whitney 15” Machinist Level! Condition on this item is very good. No Rust or Pitting Just the slightest of dings here and there. Thanks for looking and Good Luck! I WILL SHIP OVERSEAS. PLEASE ASK FOR QUOTE SEE OUR OTHER AUCTIONS FOR MORE! DB— gsrx_vers_526(GS 6.6.6(526)
|
|
|
H J WILLIAMS N-30-RH CUT-OFF TOOL HOLDER AND BLADE ATLAS SOUTH BEND LOGAN LATHE
H J WILLIAMS N-30-RH CUT-OFF TOOL HOLDER AND BLADE. THE TOOL HOLDER IS USED. THE BLADE IS NOS NEVER BEEN USED. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. ... moreI WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
2 DEAD CENTERS MT1 6" ATLAS 618 CRAFTSMAN 101 SOUTH BEND LATHE
2 DEAD CENTERS MT1 6" ATLAS 618 CRAFTSMAN 101 EXCELLENT CONDITION IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. ... moreIF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-144b96b038b-0x113-
|
|
|
HOMECRAFT WILLIAMS No 2020 S CUT-OFF TOOL ATLAS CRAFTSMAN SOUTH BEND LATHE
HOMECRAFT WILLIAMS No 2020 S CUT-OFF TOOL SHANK IS 3/4" X 5/16" I SEE ONE VERY SMALL SCRAPE ON IT MINT CONDITION. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND ... moreBID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
ATLAS 618 CRAFTSMAN 6" LATHE FACEPLATE DOG 1" CAPACITY SOUTH BEND LOGAN
ATLAS 618 CRAFTSMAN 6" LATHE FACEPLATE DOG 1" CAPACITY NO BREAKS OR REPAIRS EXCELLENT. THE DOGS I HAVE LISTED ARE NOT BEAT-UP AT ALL. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE ... moreREAD MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
9 10k SOUTH BEND LATHE CONE PULLEY HEAD STOCK PART
9 10k SOUTH BEND LATHE CONE PULLEY HEAD STOCK PART IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE ... moreMORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
9 10K SOUTH BEND LATHE APRON RACK PINION GEAR EXCELLENT 5/8" BORE
9 10K SOUTH BEND LATHE APRON RACK PINION GEAR MINT! NO CHIPPED OR BROKEN TEETH VERY LITTLE WEAR. 5/8" BORE IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. ... moreI WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
9 10k SOUTH BEND LATHE BACK GEAR & BACK GEAR ECCENTRIC MACHINIST PART
9 10k SOUTH BEND LATHE BACK GEAR& BACK GEAR ECCENTRIC NO BROKEN OR CHIPPED TEETH ALL IN VERY GOOD CONDITION. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. ... moreI WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
9 10K SOUTH BEND LATHE CROSS SLIDE WITH BRASS NUT WITH GIB & GIB SCREWS
9 10K SOUTH BEND LATHE CROSS SLIDE WITH BRASS NUT WITH GIB& GIB SCREWS IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN ... morePOSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
9" 10K SOUTH BEND LATHE APRON HAND WHEEL PART MACHINIST BEAUTIFUL CONDITION
9" SOUTH BEND LATHE APRON HAND WHEEL EXCELLENT CONDITION. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. ... moreIF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
5" UNION 3 JAW LATHE CHUCK WITH REVERSING JAWS ATLAS SOUTH BEND CRAFTSMAN
5" UNION 3 JAW LATHE CHUCK WITH 2ND SET OF REVERSING JAWS IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. ... moreIF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
South Bend Lathe 9" X 36" / 3 foot bed Workshop
This is a"relist" I guess I had this in the wrong category, Ebay required it to be relisted for the proper sale commission. Sorry for any inconvenience. South Bend Lathe 9" x 36" 3 foot) Bed"Workshop" The 36" 3 foot) is the entire bed length including under the spindle and tailstock. Distance between centers is 18" S/N 75965 115 volt Pick-Up Only- Located at zip code 44048(Kingsville. Ohio) If you(buyer) want to arrange shipping that is ok. The lathe is mounted to a steel table(included) as pictured. Included is the lathe. Steel table, and chuck key as picture. Lathe can be seen running on Youtube video here http:youtu.be/yspK0NBrgk8 Sorry. I do not have anything else for sale with this lathe(I.E. extra gears. Chucks, tooling) Verified Paypal Or Cash Only. NO CHECKS- NO MONEY ORDERS Adding this as questioned ... moreThe total foot print of the lathe and table to farthest points is 60" long) X 30" wide) X 49" tall) As to the weight. I can not tell you exactly however I would guess it to be around 400lbs/ 450lbs total. I am basing that on the info in this South Bend PDF file/ on page 6/ far right model(9" lathe w/ motor 3 foot bed) It shows a shipping weight of 496lbs from the factory but that would include crating and extra gears etc.
|
|
|
H J WILLIAMS OO-R AGRIPPA TOOL HOLDER ATLAS CRAFTSMAN SOUTH BEND LATHE
H J WILLIAMS OO-R AGRIPPA TURNING TOOL HOLDER SHANK IS 11/16" X 5/16+ HOLDS TOOL BITS 1/8" THIS FITS 6" ATLAS 618 CRAFTSMAN 101 LATHES I SEE NO MARKING TO INDICATE THIS WAS USED MINT CONDITION. I'M CALLING IT USED BECAUSE I DON'T KNOW. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My ... morefeedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
ORIGINAL ATLAS 6" HEAVY DUTY 4 JAW REVERSING LATHE CHUCK & KEY SOUTH BEND
ORIGINAL ATLAS 6" HEAVY DUTY 4 JAW REVERSING LATHE CHUCK& KEY EXCELLENT CONDITION 1 1/2 X 8 TPI. KEY IS NOT IN THE PICTURES IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK ... moreAND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
South Bend 13"Swing 6' Bed Quick Change Gear Lathe
South Bend 13"Swing 6' Bed Quick Change Gear Lathe in Very good working condition. Model 8113C Wired 220 single phase Comes with: 10 1/2" 3 Jaw Chuck 4 pc Tool Bit Holder 10" 4 Jaw Chuck Taper Attatchment Live Center 1/2" Drill Chuck 5c Collet Nose Worklight Deposit of $500 thru paypal due at end of auction and balance due upon pickup. Cash only. This item is also for sale locally and I reserve the right to end this auction if sold locally.
|
|
|
ORIG LFP-100N SOUTH BEND 9 10K LATHE 7 3/8" FACE DOG DRIVER PLATE 1 1/2" X 8 TPI
Nice- Original South Bend 7 3/8" diameter face plate. Thread mounting diameter is 1 1/2" x 8 TPI. Threads are in fine order. Outside thickness 7/8" Stamped"LFP-100N" All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
6" Cushman 3 Jaw Chuck from 10" South Bend Heavy 10 Lathe, 2-1/4" x 8 Mount
Offered here is a 6" Cushman 3 Jaw Chuck which had been used on a 10" South Bend'Heavy 10' Lathe. The chuck has a 1-1/2" center bore and a standard 2-1/4" x 8 mounting thread. The back mounting plate is an original South Bend. And it is marked 10L- 13L. The chuck came from a garage machine shop of a retired tool and die maker, and it had not been used in quite some time. The jaws open and close smoothly and the chuck wrench is included. In my opinion the chuck could use a thorough cleaning and I believe that this will make a nice general purpose chuck. Please note, only the set of jaws shown mounted in the chuck are included.
|
|
|
SOUTH BEND 9 OR 10k LATHE LEVELING FEET MACHINIST PART
SOUTH BEND 9 OR 10k LATHE LEVELING FEET I MAY BE ABLE TO FIT THESE INTO A MEDIUM FLAT RATE BOX? IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL ... moreCOMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIMETO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144ba41cf04-0x100-
|
|
|
NICE SOUTH BEND 9 10k LATHE COMPOUND SADDLE REST BASE & PINS & SCREWS
NICE SOUTH BEND 9 10k LATHE COMPOUND SADDLE REST BASE& PINS& SCREWS IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN ... morePOSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
9 10k SOUTH BEND LATHE ORIGINAL BRASS WAY WIPERS MACHINIST PART
9 10k SOUTH BEND LATHE ORIGINAL SET OF 4 BRASS WAY WIPERS IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU ... morePURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
9" 10K SOUTH BEND LATHE SADDLE CASTING MACHINIST PART
9" 10K SOUTH BEND LATHE SADDLE CASTING MACHINIST PART YOU CAN SEE THE FACTORY SCRAPINGS WELL TAKEN CARE OF. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. ... moreI WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
13" X 40" SOUTH BEND TOOLROOM LATHE W/ TAPER ATTACHMENT
MODEL A. CL81459. 13" X 40" SOUTH BEND TOOL-ROOM LATHE W/ TAPER ATTACHMENT SN# 3769TKL10 1 3/8 SPINDLE HOLE 6" 3-JAW CHUCK. 2-PIECE JAWS, WITH WORK-LIGHT& CHUCK GUARD MICROMETER CARRIAGE STOP 1 HORSEPOWER 220/440 ON 220 VOLTS EST WEIGHT 1350 LBS WILLING TO SHIP CONTACT ME FOR QUOTE BUYER AFTER IF BUYER REQUIRES SKIDDING OR CRATING CONTACT ME FOR A QUOTE
|
|
|
9" 10K South Bend lathe SADDLE FEED SCREW AND HANDLE
This listing is for a 9" 10K South Bend lathe saddle feed screw and handle. It is in good shape. The screw shows normal wear. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
Small Lathe gearcase cover 3201 casting , Atlas, South Bend, Craftsman
Nice used gearcase cover for turning lathe. Casting number on base is 3201. If you know the model this fits please advise. I acquired a fair amount of lathe items with a gunsmith estate so check back. Will gladly combine items for shipping to save you money. Thanks
|
|
|
Small Lathe gearcase 3545 casting , Atlas, South Bend, Craftsman
Nice used gearcase for turning lathe. Casting number on base is 3545. If you know the model this fits please advise. I acquired a fair amount of lathe items with a gunsmith estate so check back. Will gladly combine items for shipping to save you money. Thanks.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-144bc9452d5-0x102-
|
|
|
Small Lathe Tailstock, B 3505 casting , Atlas, South Bend, Craftsman
Nice used Tailstock for turning lathe. Casting number on base is b3505.If you know the model this fits please advise. I acquired a fair amount of lathe items with a gunsmith estate so check back. Will gladly combine items for shipping to save you money. Thanks
|
|
|
16 PC LOT ARMSTRONG WILLIAMS ATLAS TOOL HOLDER SOUTH BEND CRAFTSMAN METAL LATHE
16 PC LOT ARMSTRONG WILLIAMS ATLAS TOOL HOLDER SOUTH BEND CRAFTSMAN METAL LATHE. Dead centers MT#2. Knurling tool thread cutter cutoff tool, all used but in good shape. You will get all you see in the pics. I will ship out by U S post office. You need to pay the total for the item& shipping, I will accept Pay-pal or U S postal $ ORDER then I will ship it out in a few days, I will combine orders to save on shipping cost. If you need more pictures or have any questions send me a E-mail or call 954-554-3144. Thank you! CHECK OUT MY OTHER LISTINGS*
|
|
|
SOUTH BEND LATHE 18inch swing 10 foot bed needs cleaned up.
South bend quick change lathe long 10 foot bed Well if you are looking for a long bed lathe this will be great deal for you. yes this lathe is in need of a good cleaning. Yes it will need a good cleaning but the ways are in nice shape some surface rust and will need some cleaning of cross feed screw but in a short time you will have a heck of a lathe. Thanks for your Business! If you want to see it call 419-698-3733! God Bless!
|
|
|
Vintage South Bend, How To Run A Lathe Manual, 33rd Edition, 1937
UP FOR BID: SOUTH BEND'S HOW TO RUN A LATHE MANUAL. 33RD EDITION, 1937, 160 PAGES. THERE ARE CREASES IN THE COVER. THE PAGES ARE OFF WHITE TO YELLOW AND THERE ARE A FEW OIL STAINS ON SOME PAGES. THE BINDING IS INTACT WITH NO LOOSE PAGES. ANY QUESTIONS YOU MAY HAVE PLEASE ASK. THANK YOU FOR LOOKING. Mattsironstuff.
|
|
|
SOUTH BEND LATHE 9'' 10K UNDERNEAT DRIVE COUNTERSHAFT OILERS OIL CUPS 155X44
UP FOR SALE IS THE ORIGINAL COUNRESHAFT PULLEY OILERS/OIL CUPS SET FOR SOUTH BEND LATHE 9 10K WITH UNDERNEAT DRIVE MOTOR IN VERY GOOD CONDITION. CAP SPRINGS ARE GOOD THEY SNAP NICE. PART NO.155X44. YOU WILL GET THE PART JUST LIKE YOU SEE IT IN THE PICTURE. SEE MY OTHER AUCTIONS FOR MORE LATHE PARTS AND OTHER INTERESTING ITEMS. PAYMENT: Is expected within 7 days. I'm PayPal Verified) IF YOU HAVE A PAYPAL CONFIRMED SHIPPING ADDRESS THAT THE CARRIER WILL DELIVER TO; otherwise please pay a different way. I also accept cashier's check. Remember to give your shipping address and phone# FOR INTERNATIONAL BUYERS PAYPAL ACCOUNT REQUIRED. BUYER TO PAY CUSTOM FEES IF ANY REQUIRED. SHIPPING: For this item will be $3.00 USPS FIRST CLASS Mail with Delivery Confirmation. Insurance(if desired) will be an additional $1.75 I ship most items the next ... moreweekday after receiving payment. i will combine shipping to save you money if you buy more items within a week- as long as they go together in the same box. QUESTIONS: HOME PHONE/FAX: 954) 428-6575 CELL PHONE: 954)415-9744 PLEASE CALL any day from 8 a.m to 10 p.m. Eastern time. THANK YOU FOR LOOKING AT MY AUCTIONS. Click Here. Double your traffic. Try Vendio Gallery Risk FREE!
|
|
|
SOUTH BEND 10" HEAVY TEN 10L LATHE apron Nice shape Lever style feed
South Bend Heavy 10 If you are looking for a apron for your heavy ten here is a nice one. Has the Lever style feed which is an upgrade. we had a south bend come in that is for parts. Thank you for your Business! Shipping will be 30.00 God Bless! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-144bd1abbcf-0xf4-
|
|
|
South Bend Turnado turn nado 17 inch lathe bed
This is a South Bend Turnado Turn nado Lathe Bed If you have a need for a Great lathe Bed this one is in Very nice shape. This lathe was dropped and some of the gearboxes are broken. Thank you for your Business! Shipping: Freight God Bless!
|
|
|
NICE SOUTH BEND 9" LATHE CARRIAGE STOP
Nice Carriage Stop for a South Bend 9" Metal Lathe. Stamped 1389NH1. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE ORIGINAL SOUTH BEND 9" LATHE GEAR GUARD DOOR AND HINDGE
Nice Original Gear Guard Door and Hindge for a South Bend 9" Metal Lathe. Lubrication Chart is clear and legible. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELENT ORIGINAL SOUTH BEND 9" LATHE 5 1/8" FACE PLATE 1 1/2 X 8 TPI
Excellent Original South Bend 9" Lathe 5 1/8" Face Plate. Thread mount is 1 1/2 X 8 TPI. Face Plate measures 5 1/8" in diameter and has a 5/8" high outer wall. Stamped with the South Bend Logo and"SFP 100NK" If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
South Bend, turn nado Turnado 17 inch lathe end cover Aluminum Nice shape
This is a turn nado turnado 17" made by south bend. This Lathe end guard. It is used but in nice shape. as you can see it is the end guard this is Aluminum. Will ship. Thank you for your Business! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-144be4b53a9-0x10a-
|
|
|
NICE ORIGINAL SOUTH BEND 10K LATHE HEADSTOCK GUARD RUBBER BUMPER GROMMETS SET
Nice- Original South Bend set of two(2) rubber bumpers for a 10K South Bend lathe headstock guard. Mounting stems are 3/16" diameter. All in good order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VERY NICE SOUTH BEND 9 10K LATHE HORIZONTAL DRIVE COUNTERSHAFT CAST FRAME & BASE
Very Nice- Original countershaft cast frame with base. Oilers, bearings and spindle for a 9" or 10K horizontal drive South Bend lathe. Oilers are present and in good order. Bearings are very nice. Casting is stamped 9W-9-1940. Spindle is 3/4" diameter on two step end. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIGINAL SOUTH BEND 9 10K LATHE COUNTERSHAFT COVER SAFETY GUARD VGB00N
Excellent Condition- Original countershaft guard and mounting bolt for a 9" or 10K South Bend lathe. Guard is stamped VGB 00N. Very nice unit. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-144be4b6fad-0x10c-
|
|
|
VERY NICE ORIGINAL SOUTH BEND 10K LATHE HEADSTOCK HARDWARE OILERS GITS PT2676NK1
Very Nice- Original set of headstock oilers for a South Bend 10K lathe. Oilers are part number PT2676NK1. Spring loaded lids work as they should. Strong return on springs. Threads are 5/16" diameter. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIGINAL SOUTH BEND 9" 10K LATHE HEADSTOCK CLAMP SET PART PT13NK1
Excellent Condition- Original set of headstock mounting clamps for a 9" or 10K South Bend lathe. Clamps are 1 3/4" wide. 2 1/2" long. South Bend part number PT13NK1. Original bolts and washers are also included. In excellent condition, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LOT OF 27 1/4" CUTTING TOOL BITS FOR ATLAS CRAFTSMAN SOUTH BEND METAL LATHE
Nice Lot of 27 1/4" Cutting Tool Bits for an Atlas. Craftsman or South Bend Metal Lathe. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
How to Run a Lathe, South Bend Lathe Works, 1952, Volume 1 Edition 51
How to Run a Lathe Volume 1. Edition 51 The Care and Operation of A Screw-Cutting Lathe copyright 1952 128 pages. Spiral bound tight clean copy. Light creases top right corner of pages Thanks for looking.
|
|
|
6" Atlas Craftsman Lathe Shaper 1/4" HSS Tool Bits South Bend Logan
Up for auction today is 12 high speed steel 1/4" tool bits for a lathe. Shaper or mill. They come as shown. If you win multiple items, I will combine shipping, and send a revised invoice after auctions are over. If you think the shipping price is too high, please email me for a shipping quote. Ebay has really changed their system, and forces us to put in weights, and sometimes the shipping prices that show up on the page are too high. Thanks for looking*
|
|
|
metal lathe assorted items,south bend lathe,rocker tool post,lathe dogs
1)lathe clamp dog No 3 billings.1)billings lathe clamp dog just says M.I.T stamped in it,3) dead centers,1) 33F skinner drill chuck(seems very old)rocker tool post,base plate is 1-3/4" x 1-7/8" x 3/8" with wrench(no rocker) Posted with
|
|
|
Vintage South Bend Metal Engine Lathe Stand Heads Tools Parts 4-1/2' 4"
UP FOR AUCTION IS THE ITEM(s) IN THE PHOTO You get the ITEM in the photo. Vintage South Bend Metal Engine Lathe Nice heavy duty Stand couple of Heads some other misc. Tools& Parts Hasn't been touched in years. Untried, untested, Available to be picked up in Stevensville MD 21666 Ask Questions if you got'em. Here it is. CHECK THE PHOTO. ASK QUESTIONS, AND BID ACCORDINGLY! LOOK! NO RESERVE, See The Opening bid? This is here to be sold! All sales for used or vintage items are final and are sold"as is" and without warranty. I try to give a full and honest description of all imperfections and defects but these items may have minor flaws not readily apparent or visible. Most items are not new and may show signs of age and use. Read the description carefully and again-EMAIL WITH QUESTIONS Please don't ask me to end this ... moreearly. It just gets other buyers Mad. Bid if you like what you read. And see. Check out my other items! You never know what you might find. Bidders with feedback in the negative( need to email me BEFORE BIDDING or those bids will be subject to being cancelled by me. This does not mean you can't bid. Just check in with me first. Winning bidder MUST reply to my email. Or make contact within 3 days of auction end. CHECK MY FEEDBACK. YOU CAN BE ANOTHER HAPPY CUSTOMER SHIPPING TERMS: NO SHIPPING by ME. Buyer can arrange for it to be picked up, Items are also available to be picked up HERE. PAYMENT TERMS: READ and be able to MEET THESE PAYMENT TERMS: PAYMENT IN FULL IS DUE WITHIN 3 DAYS OF AUCTION CLOSE, CASH WHEN PICKED UP is Preferred. PAYPAL works too. Other forms of payment are available INTERNATIONAL BIDDERS: Are Welcome. Please keep Payment and Shipping terms, and Payment timeline in mind when you bid. Email with questions! PLEASE: Have item# and title in ALL emails' subject line. Emails without a subject get deleted right away! Bid early. Bid High, Bid Often! And Thanks for Looking! I Return feedback on all auction items. Thanks in advance for yours. ag6 2.RcmdId ViewIt
|
|
|
south bend 13" lathe thread dial,south bend lathe 13" threading dial
Thread dial from a south bend 13" lathe.turns but will need to be oiled to turn nice.loose paint but decent condition.Spend a few minutes and have a decent thread dial for your 13" Posted with
|
|
|
Compound for 10" South Bend Lathe W/ Large Satin Chrome Direct reading Dial
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Offered is a great compound for a 10" South Bend Lathe. It has the Much desired Large direct reading Dial w/ Satin chrome finish. It is in good condition and has minimal Backlash.
|
|
|
south bend lathe 9" junior overhead belt drive and legs
Overhead v belt drive with door and cast legs.auction is for the overhead drive.Door and legs only,nothing else is included.lathe not included* I don't want to seem repetitive but only the drive unit with door and cast legs is in this auction,nothing else in the pictures is included.the drive is super quiet and the motor is nice Posted with
|
|
|
FACEPLATE FOR A SOUTH BEND LATHE or Sheldon, 2 1/4 -8 TPI mounting hole
FOR AUCTION: 10" FACE PLATE WITH 2 1/4" TPI MOUNTING HOLE. WILL FIT A SOUTH BEND AND SHELDON I KNOW FOR SURE MAYBE OTHERS AS WELL. WHAT YOU SEE IS WHAT YOU WILL GET. FEEL FREE TO ASK QUESTIONS
|
|
|
8 " Cushman 4-jaw metal lathe chuck , 2 1/4-8 backplate- south bend -sheldon
For auction: Cushman( metal) Lathe chuck. 8" 4 Jaw. With 2 1/4 8 TPI backing plate. Cushman Industries Inc Hartford Conn USA#4207 91 001 07 200A 4 Independent Jaws For sure it fits a South Bend and Sheldon Lathe. NO CHUCK KEY
|
|
|
9" South Bend Lathe Quick Change Leadscrew 20T Gear & Nuts
This auction is 9" South Bend Lathe Quick Change Leadscrew 20T Gear& Nuts in good condition. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-144be5b27e9-0xf1-
|
|
|
South Bend Compound Gear1-8 86 tooth with bushing from a 9 X 36 inch lathe
South Bend compound Gear 1-8 ratio 86 tooth All teeth are intact as you can see in the photo's. Just clean lube and mount on your lathe It comes with the bushing. Check my other listings If you need themore change gear parts. I will combine shipping if you order more than one item. This will ship via USPS for $6.50 within the U.S. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144be5b2817-0x10c-
|
|
|
South Bend Turning Gear # 116Y 9W-42 from a 9 X 36 inch lathe
South Bend Lead turning Gear# 116Y 9W-42. All teeth are intact as you can see in the photo's. Just clean lube and mount on your lathe. If you need the entire lead screw and banjo I have it listed. I will combine shipping if you order more than one item. The combination Gear and bushing is also on another listing. This will ship via USPS for $6.50 within the U.S.
|
|
|
Early South Bend 13" Lathe Change Gear Guard
Was removed from a 1926 South Bend 13" lathe. Good working condition. Has 1.682" bore. 6.800" OD, 66 tooth, Good working pin.
|
|
|
SOUTH BEND Compound for 13" Lathe w/Gib & Gib Screw
This is a SOUTH BEND Compound for a 13" Lathe. It comes with a GIB& a Gib Screw. As you see this has the large chrome dials. As can be seen in the last photo the length of the T slot for the tool holder is about 4" The width of the dovetail with the gib at the widest is about 2.7" These measurements should help you to make certain this will fit your lathe. If you need more info send a email and we'll do our best to make sure you're getting the correct item. Shipping: $15.00 LOCE4
|
|
|
Metal Lathe L-W CHUCK Co. 3 jaw 7 1/2 ,south bend,atlas ,logan lathe,1-1/2"-8tpi
heavy duty 7 1/2 inch L-W Chuck Co. 3 jaw chuck has inside and outside jaws and key clean scrolls good heavy approx 28 lbs 1 1/2-8 tpi mount Made in Toledo Ohio USA do not need it so selling used so not perfect not sure of age please look at pics. that is what they are for and are part of description DON'T MISS OUT BUY NOW
|
|
|
ASSORTED LOT OF 5C COLLETS….15 total..various sizes and makes SOUTH BEND LATHE
ASSORTED LOT OF 5C COLLETS…15 total.various sizes and makes SOUTH BEND LATHE Assorted Lot of Used 5c Collets… 15 in total Details: 15 Total-all used-various sizes and brands What you see in the pictures is all you get Thanks for looking and Good Luck! SEE OUR OTHER AUCTIONS FOR MORE! DB— gsrx_vers_526(GS 6.6.6(526)
|
|
|
South Bend 9" Lathe Cushman Three Jaw Chuck 1 1/2"-8tpi
6 1/4" diameter three jaw scroll chuck has 1 1/2"8tpi with top reversing jaws removed from a 9" South Bend lathe. May fit other lathes. Good working condition. Comes as shown. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-144be6832d6-0x11c-
|
|
|
Early South Bend 13" Lathe Four Jaw Chuck 1 7/8"-8tpi
10" diameter independent four jaw chuck has 1 7/8-8tpi threaded back plate for early 13" South bend lathes. May fit other lathes. Good working condition. Comes as shown. Ships UPS ground to 48 states only.
|
|
|
Early South Bend 13" Lathe Dog Driving Face Plate 1 7/8"-8tpi
8" diameter face plate has 1 7/8-8tpi threads for early 13" South bend lathes. May fit other lathes. Good working condition. Comes as shown. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-144be68332b-0xec-
|
|
|
south bend lathe 9 10k quick change input shaft
good used input shaft. see pictures. thank you
|
|
|
ORIGINAL SOUTH BEND 9" MODEL A / B LATHE APRON FEED WORM GEAR
9" or 10k apron worm gear excellent condition
|
|
|
South Bend 9" Metal Lathe 80 Tooth Idler Gear 5/8" Bore 80T
South Bend 9" Metal Lathe 80 Tooth Idler Gear 5/8" Bore 80T The 80 tooth idler gear is in fine condition with some wear. It has a 5/8" center bore. It is off of a South Bend 9 inch metal lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $6. 5 0 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
Vintage How To Run A Lathe 43rd Edition J.J. O'Brien South Bend Lathe Works
How To Run A Lathe 43rd Edition J.J. O'Brien South Bend Lathe Works. Very good condition(The cover shows a bit of wear) Thanks for looking
|
|
|
Vintage How to Run a Lathe Instruction Book South Bend Lathe Works, Indiana 1932
Up for Auction is a Vintage How to Run a Lathe Instruction on the Care and Operation of A Back Geared Screw Cutting Engine Lathe for the Machine Apprentice. It is the 30th Edition copyright 1932. It is for the South Bend Lathe Works. South Bend Indiana. It measures approx. 5 1/4" by 8" and has 160 pages. It is in good used condition but does have folds and creases and bumped corners. It also has slightly soiled cover. Please view all photos and ask questions prior to bidding. Shipping charges apply to the 50 US States. No International Bidders. Payment must be received within 3 days of auction end.
|
|
|
Morse Twist Drill No.5 & 6 Taper Plug Gages Male & Female South Bend Logan Lathe
Morse Twist Drill& Machine Co. No.5& No.6 tanged taper plug gages male and female set. Due to the size and weight(35.5 lbs) these will ship in two USPS Flat Rate Priority Boxes to save on shipping cost. Please wait for invoice for correct shipping total. Ebay's calculator is not always accurate. Shipping includes insurance if needed. If you have any questions. Please ask, all emails will be answered. Please study the pictures and description for condition. There are no refunds or returns unless there is an error in the listing. PayPal only. Payment due within 3 days of close of auction. No international shipping. Shipping to 48 states and Alaska only. If you have any problems with your purchase. Please email before leaving feedback. I will gladly take care of any problems. Thanks.
|
|
|
Set of 4 Lantern RockerType lathe Tool Holders Williams Armstrong South Bend
You are bidding on a lot of 4 Lantern type rocker tool holders for a small lathe. 3 are JH Williams and 1 is Armstrong.They are a 0 straight. 0 left and a 0 right. These take a 1/4" bit. The fourth is a 5/8 parting tool holder with blade. Nice Condition,used but not abused and would make a nice addition to your lathe. Winner to send payment within 10 days from end of auction. Shipping is based on a 3 LB boxed weight. Note we will not be responsible for fees or delays due to customs on foreign shipping. We ship on Mondays. Thanks and good luck.
|
|
|
South Bend Model 9" Lathe Cross Feed Handle Dial and Nut
Good condition handle dial and nut.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-144c436b870-0xe8-
|
|
|
ORIGINAL SOUTH BEND 9 10K METAL LATHE FACE PLATE 7-1/4" DIAM 1-1/2 x 8 TPI 40NK1
ORIGINAL SOUTH BEND 9 10K METAL LATHE FACE PLATE 7-1/4" DIAM 1-1/2 x 8 TPI 40NK1
|
|
|
EXCELLENT ORIGINAL SOUTH BEND SET OF 6 LATHE DOGS DOG LOT FOR 9" 10K LATHE
Excellent condition- Set of 6 Original South Bend lathe dogs stamped with South Bend part numbers as follows: 1655NR1#1- 1 5/8" diameter 1654NR1#4- 1 3/8" diameter 1653NR1#4- 1 1/8" diameter 1652NR1#5- 7/8" diameter 1651NR1#6- 5/8" diameter 1650NR1#6- 1/2" diameter Excellent hard to find original South Bend product. The illustrated photograph is taken from an original 1954 South Bend lathe catalog. And is not included. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIGINAL SOUTH BEND 9 LATHE 92 TOOTH 92T CHANGE THREADING GEAR
EXCELLENT ORIGINAL SOUTH BEND 9 LATHE 92 TOOTH 92T CHANGE THREADING GEAR
|
|
|
SOUTH BEND lathe vertical countershaft-motor mount - for larger models (13")
Floor mounted counter shaft assembly. About 43" tall. Probably for a 13" Pulley has a small broken edge on one side. Which shouldn't effect usage. Pickup only. Thanks for looking.
|
|
|
NICE ORIGINAL SOUTH BEND 9" LATHE HEADSTOCK BULL QUILLS
Nice Original Set of Headstock Guards for a South Bend 9" Lathe. Stamped with part number 149N1. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT LOT OF 3 WELDON END MILLS FOR ATLAS CRAFTSMAN SOUTH BEND METAL LATHE
Excellent Original Lot of 3 Weldon End Mills for an Atlas. Craftsman or South Bend Metal Lathe. Includes 2 Double-Ended End Mills, Cat. BB 8-2 1/4" Diameter with a 3/8" Shank, and Cat. BB 10-2 5/16" Diameter with a 3/8" shank. 1 Single Ended End Mill Cat. B 20-3 5/8" Diameter with a 1/2" Shank. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SOUTH BEND LATHE 9" OR 10" RYAN CO. MILLING ATTACHMENT. VERY NICE
Up for bid is a Ryan co. milling attachment that came with a South Bend 9" lathe. I believe it fits a 9" or 10" lathe. ask questions if needed to make sure it fits yours) I have had several 9" SB attachments and it's about the same size. The mounting bracket measures 1 1/4" x 2 3/4" long. Looks like it slides into your compound assembly. Very nice attachment for a great price. Free shipping to the lower 48 states.
|
|
|
ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE PIPE BULL BALL BEARING CENTER #2 SHANK
ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE PIPE BULL BALL BEARING CENTER#2 SHANK Click to Enlarge Click to Enlarge Click to Enlarge NICE 2 3/4-1/2 DIAMETER TAPERED BULL/PIPE LIVE CENTER WITH#2 MT SHANK. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
Drilling Notch Norse Taper # 2 for South Bend Lathe
This Drill Notch Norse Taper#2 fits a South Bend Lathe. It is manufactured by MF Co. It is in excellent condition. Selling as is. Please see actual pictures for condition and details. All questions are welcomed. Selling in the lower 48 states only. No internationals sales or shipping. Thank you for reviewing my auction and be sure to see other items for sale.
|
|
|
FORWARDING & REVERSING MOTOR SWITCH FOR ATLAS CRAFTSMAN SOUTH BEND METAL LATHE
Forwarding and Reversing Motor Switch for an Atlas. Craftsman or South Bend Metal Lathe. Control switch moves solidly in all 3 positions. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-144cd9f70e3-0x103-
|
|
|
1/2" LATHE DRIVER DOG TOOL 4 ATLAS CRAFTSMAN SOUTH BEND LOGAN MACHINIST
Very nice lathe dog. 9/16" interior diameter. 1 3/4" long leg. In good order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
South Bend Lathe Mica Undercutter
Mica Undercutter for South Bend 9" and 10" lathes Must be kind of hard to find these as this is the only one I have seen Thanks ken
|
|
|
MACHINIST TOOLS LOT-STARRETT 445 FLAT BLADES LUFKIN-SOUTH BEND LATHE ATLAS LOGAn
MACHINIST TOOLS LOT-STARRETT 445 FLAT BLADES LUFKIN-SOUTH BEND LATHE ATLAS LOGAn 1 Lot of Assorted Machinist Tools… Lots of nice stuff here… Details: 1) 0-1” Lufkin Micrometer 1) 1-2” Lufkin Micrometer 1) Federal Dial Test Indicator.0001” 1) misc feeler gauge 1) Starrett Depth Mic#445(no case) FLAT BLADES! 6 blades to 6” 1) Starrett Thread gauge#6 1) Starrett Fillet/Radius gauge#272A 1) Starrett Center gauge for threading#C391 1) Starrett Taper gauge 269B 1) Starrett Toolmaker’s Square 1) Lufkin 6” rule 4) Dividers/Calipers 2 Starrett. 1 Lufkin, 1 Brown Sharpe 1) Jacobs 7B Chuck 0-1/4” Straight Shank w/key 1) Supreme Chuck 0-1/4” Straight Shank w/key 1) Edge/Center finder for milling machine NO RETURNS ON THIS LOT Thanks for looking and Good Luck! SEE OUR OTHER AUCTIONS FOR MORE! DB— gsrx_vers_526(GS 6.6.6(526)
|
|
|
AWESOME NICE GEARS SOUTH BEND 9" 10K LATHE REVERSE TUMBLER GEAR BRACKET ASSEMBLY
AWESOME NICE GEARS SOUTH BEND 9" 10K LATHE REVERSE TUMBLER GEAR BRACKET ASSEMBLY TOP GEAR HAS 2 CHIPS AS SEEN IN PHOTTO WAS FUNCTIONING UNTIL TAKEN APART
|
|
|
7" SOUTH BEND LATHE, STANDARD MODERN FACE PLATE,DOG PLATE D1-4" MOUNT
YOU ARE BIDDING ON A 7" SOUTH BEND LATHE. STANDARD MODERN FACE PLATE,DOG PLATE D1-4" MOUNT. MADE BY BUCK CHUCK COMPANY ANY QUESTIONS PLEASE ASK! PLEASE LOOK AT MY OTHER LATHE AND MILLING MACHINE STUFF FOR SALE. LOCATION SHIPPING IS DASED ON YOUR ZIP CODE WITH WEIGHT AND SIZE OF PACKAGE IF YOU HAVE A BETTER WAY PLEASE LET ME KNOW I DONT CHARGE FOR PACKING YOUR ITEM IF YOU WONT INSURANCE PLEASE LET ME KNOW THAY COST EXTRA. ANY PRIBLEMS PLEASE CONTACT ME COMUNICATION IS THE BEST I WILL POST CONFORMATION NUMBER WHEN ITEM SHIPS.
|
|
|
12" SOUTH BEND LATHE, STANDARD MODERN FACE PLATE, D1-4" MOUNT
YOU ARE BIDDING AN A 12" SOUTH BEND LATHE. STANDARD MODERN FACE PLATE, D1-4" MOUNT ANY QUESTIONS PLEASE ASK! PLEASE LOOK AT MY OTHER LATHE AND MILLING MACHINE STUFF FOR SALE. LOCATION SHIPPING IS DASED ON YOUR ZIP CODE WITH WEIGHT AND SIZE OF PACKAGE IF YOU HAVE A BETTER WAY PLEASE LET ME KNOW I DONT CHARGE FOR PACKING YOUR ITEM IF YOU WONT INSURANCE PLEASE LET ME KNOW THAY COST EXTRA. ANY PRIBLEMS PLEASE CONTACT ME COMUNICATION IS THE BEST I WILL POST CONFORMATION NUMBER WHEN ITEM SHIPS. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-144d0887fe9-0x10f-
|
|
|
SOUTH BEND 9" LATHE FLAT BELT GEAR CONE PULLEY IN GREAT SHAPE
HERE'S A SOUTH BEND 9" METAL LATHE HEADSTOCK FLAT BELT GEAR CONE PULLEY FOR MODEL A. B& C LATHES IN GREAT SHAPE. NICE SHARP TEETH ON THE GEAR. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
|
|
|
ORIGINAL South Bend model C lathe Set Screw 17/128 inches long
This is a vintage set screw off of a South Bend 9" model C lathe. It is 17/128 inches long. 13/16 inches across and its TPI is 32.
|
|
|
South Bend 20 inch TURN NADO Lathe Follower Rest
Normal 0 false false false MicrosoftInternetExplorer4 Here is a telescoping jaw follower rest for the South Bend 20” TURN-NADO geared head engine lathe. It is in nice. Clean, ready to use, condition. It is catalog# CL2395GL. It is marked on the Follower PX6686 GJ2 and GFR101G2.
|
|
|
South Bend Lathe Tailstock wheel Taper Pin
Smallest end-3.5mm Largest end-3.8mm Length-20.3mm This is the taper pin that goes into the tail stock wheel of a 9" and 10K lathe. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-144d395c7bf-0x108-
|
|
|
South Bend Lathe Backgear Cam Tension Friction Screw
This came off of a South Bend 9" model C lathe. It is in good shape and all the threads are good.
|
|
|
POLAND PUUm S 6 1/4" D4 ZD METAL LATHE 3-JAW CHUCK off SOUTH BEND G-26T
Poland PUUm 6 1/4 Inch Diameter D4 ZD Metal Lathe Camlock Chuck pulled from a South Bend Lathe Model G-26T Only includes what is pictured. We were hired by a local school district to sell this for them. It was recently removed from a lathe. It has many scratches. Nicks and wear from use. The center hole is 1 3/4 inches across and the studs are 1 1/4 inches tall. We tried to take pictures of the important features. But we are not experts on these so feel free to contact if you have any questions. Check out my other items for more items of collectible interest! Free local pickup is available by appointment. You can pay to have it shipped to you. Or we can deliver it to you for $2.00 per mile with a $10.00 minimum charge from Erie. PA 16506. Please call me at 814.882.6830 if you have any questions. For international winning bidders. Including ... moreCanada. I will only accept PayPal. Check out my other items for more items of collectible interest. Thank you and Good Luck! Sign up for my weekly email newsletters so you can regularly see what items I have ending that week. Be sure to add me to your favorites list so you can view my items easily in the future. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LATHE TAILSTOCK from SOUTH BEND 13" G-26T
Lathe Tailstock from South Bend 13" Model G-26T Only includes what is pictured. We were hired by a local school district to sell this for them. It was recently removed from a lathe. It has many scratches. Paint loss, nicks and wear from use. The hole on the spindle is 1 inch across. It is 6 1/2 from the middle of the spindle hole to the bottom of the base and the base is 5 inches wide. We tried to take pictures of the important features. But we are not experts on these so feel free to contact if you have any questions. Check out my other items for more items of collectible interest! Free local pickup is available by appointment. You can pay to have it shipped to you. Or we can deliver it to you for $2.00 per mile with a $10.00 minimum charge from Erie. PA 16506. Please call me at 814.882.6830 if you have any questions. For international ... morewinning bidders. Including Canada. I will only accept PayPal. Check out my other items for more items of collectible interest. Thank you and Good Luck! Sign up for my weekly email newsletters so you can regularly see what items I have ending that week. Be sure to add me to your favorites list so you can view my items easily in the future. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VINTAGE CRAFTSMAN 8" FACEPLATE W/LATHE DOGS FITS CRAFTSMAN SOUTH BEND LOGAN
CRAFTSMAN FACE PLATE W/LATHE DOGS. Fits Lathes with 1 1/2"8 thread. Size 8" Comes with Two 1" 1/2" Armstrong Lathe Dogs. Model 25238-103 Face Plate is in good used condition. Check out my!
|
|
|
Vintage South Bend Metal Lathe Quick Change Gear Lot # 30, 54, 60 & 69 Gears
These came from a working vintage South Bend metal lathe. 9" swing with a 3 foot bed. You get 4 gears as shown, numbers are as follows: 30, 54, 60& 69. All teeth on gears are in nice condition with no chips or over wear. Sold as is. High bidder to please add a $6.50 priority mail fee. Thanks for looking!
|
|