|
South Bend 9 or light 10 K Lathe cross feed compound micrometer graduated dial
Used graduated dial for the cross feed or compound screw on a South Bend 9" inch or Light ten 10K lathe. In good shape with clear marks and decent threads in the lock screw hole(screw not included) What you see is what you get. No other parts in this lot. T E R M S: Questions: Please ASK QUESTIONS well before auction ends! I know a fair bit about this stuff and will help you figure out if it is what you need. But you have to give me time to answer(I have a FT job) Warranty: This item is SOLD AS-IS without warranty. No return or refund. Please check my feedback. Payment: PayPal within 3 days of auction end. Please pay promptly so I can ship and deliver quickly. Feedback: You are encouraged to leave feedback indicating that the transaction has been completed to your satisfaction. I will reciprocate. I try real hard. But occasionally an ... moreunforseen issue arises. If you have an issue, please allow me the opportunity to work with you to provide a satisfactory resolution prior to leaving feedback of any type. A little communication goes a long way. Shipping: Paid by buyer. All items shipped US Priority Mail. Carefully packed and tracked. No delivery outside the Continental USA(48 States) Shipping cost not negotiable. But I will try to combine shipping for multiple purchases. If you want combined shipping you MUST let me know! Please allow at least 7-10 business days after receipt of payment for your item to arrive.
|
|
|
South Bend 9 or light 10 K Lathe headstock spindle thrust bearing
Used spindle thrust bearing for the headstock of a South Bend 9" inch or Light ten 10K lathe. In good shape. What you see is what you get. No other parts in this lot. T E R M S: Questions: Please ASK QUESTIONS well before auction ends! I know a fair bit about this stuff and will help you figure out if it is what you need. But you have to give me time to answer(I have a FT job) Warranty: This item is SOLD AS-IS without warranty. No return or refund. Please check my feedback. Payment: PayPal within 3 days of auction end. Please pay promptly so I can ship and deliver quickly. Feedback: You are encouraged to leave feedback indicating that the transaction has been completed to your satisfaction. I will reciprocate. I try real hard. But occasionally an unforseen issue arises. If you have an issue, please allow me the opportunity to work with ... moreyou to provide a satisfactory resolution prior to leaving feedback of any type. A little communication goes a long way. Shipping: Paid by buyer. All items shipped US Priority Mail. Carefully packed and tracked. No delivery outside the Continental USA(48 States) Shipping cost not negotiable. But I will try to combine shipping for multiple purchases. If you want combined shipping you MUST let me know! Please allow at least 7-10 business days after receipt of payment for your item to arrive. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-149b59191bf-0x110-
|
|
|
SKINNER JR. 4 JAW LATHE CHUCK 1 1/2" x 8 TPI ATLAS CRAFTSMAN LOGAN SOUTH BEND
SKINNER JR. 4 JAW LATHE CHUCK 1 1/2" x 8 TPI ATLAS CRAFTSMAN LOGAN SOUTH BEND Brand Skinner Packaging None Condition Very Good Quantity 1 Skinner Jr. 4806. 6" dia. Independent. Includes Key. Back plate looks shop made. Threaded area is brass. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
ORIGINAL 9" SOUTH BEND LATHE HEADSTOCK QUILL GEAR GUARD, VERY NICE CONDITION
ORIGINAL 9" SOUTH BEND LATHE HEADSTOCK QUILL GEAR GUARD. VERY NICE CONDITION, CLEAN AND VERY NICE CONDITION. Please let the pictures help with the description and condition and view my other auctions for MORE SOUTH BEND LATHE PARTS. Insurance is included in the shipping price. Check my feedback, satisfaction guaranteed and will combine ship when possible.
|
|
|
Motor Belt Gaurd For 9" South Bend Lathe
This is the motor belt guard for a 9" rear drive south bend lathe. Payment by paypal only. $10.00 handling charge for shipments to Canada 14 day money back guarantee if item is defective or not as described. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-149b713d1e0-0x102-
|
|
|
ORIGINAL 9" SOUTH BEND LATHE COMPOUND REST BASE , CROSS SLIDE
ORIGINAL 9" SOUTH BEND LATHE COMPOUND REST BASE. CROSS SLIDE, CLEAN AND VERY NICE CONDITION. Includes gib, gib screws and crossfeed nut. The swivel shoes and bolts are in another of my auctions. Please let the pictures help with the description and condition and view my other auctions for MORE SOUTH BEND LATHE PARTS. Insurance is included in the shipping price. Check my feedback, satisfaction guaranteed and will combine ship when possible. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-149b71495b7-0x111-
|
|
|
ORIGINAL 9" SOUTH BEND LATHE MODEL C SADDLE , CLEAN AND VERY NICE CONDITION
ORIGINAL 9" SOUTH BEND LATHE MODEL C SADDLE. CLEAN AND VERY NICE CONDITION. Please let the pictures help with the description and condition and view my other auctions for MORE SOUTH BEND LATHE PARTS. Insurance is included in the shipping price. Check my feedback, satisfaction guaranteed and will combine ship when possible.
|
|
|
south bend 10k lathe cross slide screw and nut-small dial
cross slide screw for south bend 10k- in good used cond. small dial. original! needs a new nut,
|
|
|
MACHINIST TOOLS LATHE 6" 4 Jaw Lathe Chuck for South Bend Logan Atlas 1 1/2" BR
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL
|
|
|
South Bend 9 10K Metal Lathe Idler Gear 80 Tooth 80T # 33NK1 Needs Repair
South Bend 9 10K Metal Lathe Idler Gear 80 Tooth 80T# 33NK1 Needs Repair has a broken tooth as seen in pictures. This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine. All the items I sell are shipped in a box not a envelope where the item can be damaged during shipping. And I ship within 24 hours I dont just print the label and wait 3 or 4 days to take it to the post office or UPS. As you can see I buy almost as much as I sell on Ebay.
|
|
|
EXCELLENT ORIGINAL SOUTH BEND 9" LATHE HEADSTOCK HOUSING CAST BEARINGS & CLAMPS
EXCELLENT ORIGINAL SOUTH BEND 9" LATHE HEADSTOCK HOUSING CAST BEARINGS& CLAMPS! This is a really nice head stock off a South Bend 9" Model C lathe. It is in excellent condition inside and out. Comes with original oilers! Has original Clamps! Bearings in perfect condition! This lathe was in perfect working order when pulled! Sat in a clean. Dry basement for the past 60 years! Spindle was nice and tight! I have other parts from this lathe listed too! Please ask Questions! I ship ASAP via USPS or FedEx! Please check out my store for more items! Please let me know of any issues when product arrives! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-149bd4cf2d2-0x114-
|
|
|
Assorted Machinist Some Kind of Wedges Gunsmith Milling Lathe South Bend
Assorted Machinist Some Kind of Wedges in good working condition as seen in the pictures. Look at all the pictures because these are the ones you are bidding on This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but wait for updated invoice before you pay.
|
|
|
Assorted Machinist Some Kind of Clamps Gunsmith Milling Lathe South Bend
Assorted Machinist Some Kind of Clamps in good working condition as seen in the pictures. Look at all the pictures because these are the ones you are bidding on This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but wait for updated invoice before you pay.
|
|
|
Assorted Machinist V Blocks Clamps Wedges Gunsmith Milling Lathe South Bend
Assorted Machinist V Blocks Clamps Wedges in good working condition as seen in the pictures. Look at all the pictures because these are the ones you are bidding on This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but wait for updated invoice before you pay.
|
|
|
How To Run A Lathe South Bend Lathe 31st Edition Care & Operation Back Geared
How To Run A Lathe South Bend Lathe 31st Edition Care& Operation Back Geared Cover has curling corner. Bottom right and shows sign of wear. First page has some holes in it, the remainder of the book is in very good condition. Some curling of the corners on bottom right corner of book. Measures 5 1/8" wide x 8" 160 pages. Check out my! Be sure to add me to your! We’re always happy to combine shipping whenever possible! 99.9% of the items I sell come from local estate sales. Garage sales etc. They are almost always used. I try to describe these items and answer questions to the best of my ability. PLEASE let me know if you are not happy with an item you have purchased so we can resolve any issues BEFORE neutral or negative feedback is left. It is always my goal to insure you a happy buying experience. SHIPPING INFORMATION: Typically ... moreI ship FIVE days a week. Monday thru Friday for domestic& International packages. I have a handicapped senior citizen do my packaging, so I do charge a $2.50 packaging/handling fee unless a flat fee is listed. Shipping outside the USA will have a $3.50 handling fee. If you're out of the USA, please email for shipping costs. Any purchases outside the USA MUST pay via PayPal Check out my other items! Be sure to add me to your favorites list! We’re always happy to combine shipping whenever possible!
|
|
|
MT2 JACOBS #18N SUPER BB LATHE DRILL CHUCK ATLAS CRAFTSMAN LOGAN SOUTH BEND ETC.
MT2 JACOBS#18N SUPER BB LATHE DRILL CHUCK ATLAS CRAFTSMAN LOGAN SOUTH BEND ETC. Brand Jacobs Packaging None Condition Good Quantity 1 1/8" to 3/4" CAP. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
MT2 JACOBS #36 LATHE DRILL CHUCK ATLAS CRAFTSMAN LOGAN SOUTH BEND ETC.
MT2 JACOBS#36 LATHE DRILL CHUCK ATLAS CRAFTSMAN LOGAN SOUTH BEND ETC. Brand Jacobs Packaging None Condition Very Good Quantity 1 3/16" to 3/4" CAP. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
MT2 JACOBS #6A LATHE DRILL CHUCK ATLAS CRAFTSMAN LOGAN SOUTH BEND ETC.
MT2 JACOBS#6A LATHE DRILL CHUCK ATLAS CRAFTSMAN LOGAN SOUTH BEND ETC. Brand Jacobs Packaging None Condition Very Good Quantity 1 0 to 1/2" CAP. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
2 Original South Bend 9" 10K Metal Lathe Idler Change Gear Bushing / Sleeve Set
2 Original South Bend 9" 10K Metal Lathe Idler Change Gear Bushing/ Sleeve Set in excellent condition as seen in the pictures. This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but wait for updated invoice before you pay.
|
|
|
2 Metal Lathe Block Style Threading Tool Holders Cutters Atlas South Bend Logan
Metal Lathe Block Style Threading Tool Holders Cutters T Bolts Atlas Craftsman South Bend Logan in excellent working condition as seen in the pictures. This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but wait for updated invoice before you pay.
|
|
|
HEAVY DUTY SOUTH BEND TYPE FOLLOW REST FOR 12" SWING LATHE
Heavy Duty Follow Rest for 12" Swing Lathe Brass Tipped Max Diameter of 3-1/2" 7" Approx. From Center Line of Mount to Center Line of Rest Measures 15" Tall x 12" Wide No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. ... moreI f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
Vintage South Bend Machine Tool Brochure Lathe Mill Tool Die Gunsmith Machinist
Here is a nice old sales folder for the South Bend product line- 19XX- Nice pic's. Torn back cover as shown in photo- so be aware of that. I especially like the accessories section.wish I had some of them. Flat rate shipping to the 48 states Thanks for looking and e-mail any questions. International buyers will be charged actual shpiping costs after the auction. Please disregard the ebay international shipping calculator. Search Words: GM Ford Chrysler Buick Plymouth Mopar Mustang Chevy Muscle Car vintage Antique Ignition Ventilation Crankcase Engine Smog Control Emission tinsmith blacksmith cooper metalworking machining bridgeport atlas lather mill tools tooling vintage antique. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
South Bend 9" Lathe Saddle and Cross Feed Screw off 1939 9C Fits 9A 9B 9C (& ?)
This is the saddle with feed screw from a compound tool assembly rest from a 1939 South Bend model 9C lathe. It should fit other models as well. It shows it age appearance wise. But the machined ways are very clean and smooth. There are two things to note: a) The speed knob on the feed screw handle is bent to the outside a bit. I did not try to bend it back straight. b) Note in the last two pictures that the feed screw collar needs to be adjusted so it sits tighter. As it is currently. The feed screw has room to slide out slightly before the inner collar catches on its stop. It is this gap which creates backlash. However by adjusting the collars correctly, backlash should be able to be minimized substantially. This lathe is being parted out. So there are(or will be) other parts listed for sale. If there is something you are looking for, please ... moreget in touch. I have included a very detailed set of photos. Please look those over carefully to assess condition. This can be shipped via Priority Mail or by one of the ground based parcel post services. Please be sure to chose your preference. If you buy more than one item. I will combine them for shipping whenever possible to keep shipping costs as low as we can. Let me know if you have any questions. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
South Bend Lathe,Toolroom Type 9" x 28" Runs Great ,Well Tooled ,Ready To Use !
Important Bidding/Buying Information Related To This Listing; We Have Done Our Best To Describe It In Detail;However. This Is A Used Item And In Our Opinion A Good One;However, Opinions Can& Will Differ On Occasion And Because Of This We Ask That You Be 100% Sure You Know What Your Buying& What To Expect When It Arrives Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit& Inspect It Yourself In Person;However.Should This Not Be Possible Or Practical Please Review The Photos& Ask As Many Questions As Possible So You Know What To Expect When It Arrives! Notice; This Has Been.Inspected And Tested For It's Function Only.We Can Not& Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It's Installation,Operation& Safe Guarding. ... moreAny And/Or All Issues Or Concerns With Regards Safety Are The Buyers Sole Responsibility And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above Machine Details& Specifications(1) Pre-Owned/Used South Bend Lathe Model A 9" x 28" Tool Room Type Engine Lathe Technical Specifications: Offered As Reference Only Buyer Must Confirm 230V/3PH/60HZ, Year of mfg. 1960's +/ Catalog-CL944Z-3-1/2'Bed S/N: 56589NAR10, Swing over bed: 9-1/4" Swing over cross slide: 5-1/2" Distance between centers: 28" Hole through spindle: 3/4" Maximum collet capacity: 1/2" Spindle nose capacity: 1-1/2" 8" Headstock& tailstock centers: 2MT, Spindle speeds: 54- 1290 RPM( 16) Threading: 4 to 224 TPI(48) Power longitudinal feeds: 0015" 0853"48) Power cross feeds: 0004" 0255" 48) Motor: 1/2 HP, Overall dimensions: 50" x 37" x 55" high, Estimated weight: 400 lbs.+/ Equipped With: 3C handwheel draw bar, Nose Cone& Thread Protector Large Assortment 3C collets, 3-jaw chucks, Bed stop, Thread dial, Reversing switch, Ring& Rocker Tool Post W/Tool Holders Assorted Accessories As Shown In Ph
|
|
|
South Bend 9" Metal Lathe MT 2 Dead Center Original Equipment Machinist Tool
South Bend Lathe Works original dead center fits morse taper two tailstock.
|
|
|
Original South Bend Lathe 9 Forward Reverse Headstock Tumbler Handle and Gears
Original South Bend Lathe 9 Forward Reverse Headstock Tumbler Handle and Gears! This part came off a fully functional South Bend 9" model C lathe. There are no chips or cracks in gears. Worked perfectly. Includes the outer gear. Has a coat of"Protective Antique Oil and Dirt" Please refer to photos! Please ask questions! I ship ASAP via USPS or FedEx. Please check out my store! Please let me know of any issues or concerns! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-149c67fc60b-0x112-
|
|
|
South bend lathe 9" lead screw support and banjo mount
This is the lead screw support and banjo mount from a 9" south bend lathe. This will fit models B and C. Excellent condition. I will combine multiple purchases to help on shipping.Happy Bidding!
|
|
|
ORIGINAL 5 1/4" DOG DRIVE LATHE FACE PLATE COULD FIT ATLAS CRAFTSMAN SOUTH BEND
ORIGINAL 5 1/4" DOG DRIVE LATHE FACE PLATE WIDTH IS 5/8" STAMPED SPF 100N 1 1/2" X 8 TPI IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. ... moreI WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
ORIGINAL 8" DOG DRIVE "T" SLOT LATHE FACE PLATE ATLAS CRAFTSMAN SOUTH BEND
8" DOG DRIVE"T" SLOT LATHE FACE PLATE STAMPED# 3 AND 3207 X 12 TPI 3/4" WIDE IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL ... moreCOMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
ORIGINAL 6 3/4" DOG DRIVE LATHE FACE PLATE COULD FIT ATLAS CRAFTSMAN SOUTH BEND
ORIGINAL 6 3/4" DOG DRIVE LATHE FACE PLATE WIDTH IS 13/16" 1 1/2" X 8 TPI IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE ... moreSHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-149c67fc73b-0x109-
|
|
|
South Bend Logan Atlas Sheldon Clausing?? Lathe Cross Slide Stop for Threading
Metal lathe cross slide stop for threading. No breaks or repairs. Brand or manufacturer unknown.
|
|
|
Vintage Tool Holders for Lathe, Atlas,South Bend,Logan,Sheldon,Enco,Craftsman
Vintage Glassoe Tool holders for Lathe Forged steel. 15/16" x 1/2" x 3 1/2" shanks, one for 1/4" round tools with zero degree angle and one for 1/4" square tools with five degree angle. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
Collet Closer Sleeve for Lathe, Atlas,South Bend,Logan,Sheldon,Enco,Craftsman
Collet Closer Sleeve for Lathe For use with South Bend#3 collets. 3MT taper OD and#3 South Bend. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
Small Shop Built Tool Post Grinder for Lathe, South Bend,Logan,Atlas Sheldon
Small Shop built Tool Post Grinder for Lathe 1" x 5/16" x 4" Shank. 110 V AC, runs about 3500 RPMs, uses standard 1/4" shank die grinder stones, great little tool for quick, light grinding projects. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
Plain Carriage Stop for Lathe,South Bend,Logan,Atlas,Sheldon
Plain Carriage Stop for Lathe Was in use on wide bed heavy nine South Bend. Will work with others, measures 3/8" from where it shoulders against bed to center of the V and 7/8" from top of V to top of base clamp. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
Lot of 5 3AT Collets for Lathe,South Bend,Logan,Atlas,Sheldon
Lot of 5 3AT Collets for Lathe 4 Royals and 1 with no mfg marking. Sizes are: 1/8" 3/16" 1/4" 3/8" and 7/16" all have good threads, some staining, no pitting. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
2 Bearing Live Center for Lathe,South Bend,Logan,Atlas,Sheldon
2 Bearing Live Center for Lathe MT2 Shank. Good point with minor pitting, turns freely, no mfg. marking, USA made bearings. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
J.H. Williams Cut Off Tool Holder for Lathe,South Bend,Logan,Atlas,Sheldon
J.H. Williams Cut Off Tool Holder#N-20-RH for Lathe 13/16" x 3/8" x 3" Shank. Includes new 9/16" cut off tool. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
Armstrong Cut Off Tool Holder for Lathe,South Bend,Logan,Atlas,Sheldon
Armstrong RH Cut Off Tool Holder#30R for Lathe 7/8" x 3/8" x 3"Shank. Includes used 1/2" cut off tool. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
Armstrong LH/RH Tool Holder for Lathe,South Bend,Logan,Atlas,Sheldon
Armstrong Tool Holder#15 for Lathe Flips to use LH or RH. Use with 1/4" bits or round boring bars, 3/4" x 5/16" x 3 3/4" shank. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
Armstrong Boring Bar Holder for Lathe,South Bend,Logan, Atlas, Sheldon
Armstrong Boring Bar Holder#2080 for Lathe 3/4" x 3/8" x 3" Shank. Includes 3/8" HSS Armstrong boring bar. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
ORIGINAL FURNAS FORWARD & REVERSING SWITCH FOR ATLAS CRAFTSMAN SOUTH BEND LATHE
Nice Original Furnas Forward And reversing Switch For An Atlas. Craftsman Or South Bend Lathe. Lever switches solidly in all three positions. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-149c7dbd3b4-0x109-
|
|
|
NICE ORIGINAL SOUTH BEND 9" LATHE 4" WOOD TURNING TOOL REST
Nice Original 4" Wood Tool Rest For A South Bend Lathe. Rest measures 4" Diameter of mounting hole is 1 3/8" If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
10" FACEPLATE FOR LOGAN 11" SOUTH BEND HEAVY 10 LATHE 2 1/4" X 8 TPI
10" Faceplate for a Logan 11' or South Bend Heavy 10 Lathe. 2 1/4" x 8 TPI. Faceplate is 10' in diameter and 2 1/4" total thick. This is a very nice heavy duty faceplate. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIGINAL BILLINGS NO 2 ? DOG VISE FOR ATLAS CRAFTSMAN SOUTH BEND LATHE
I BELIEVE WHAT I HAVE HERE IS AN ORIGINAL BILLINGS DOG VISE FOR A SOUTH BEND LATHE POSSIBLY#2? Please don't hold me to it though as I am very unfamiliar with this piece. I am guessing at what this item is; by an auction I found that sold a very similar looking piece IT MEASURES APPROXIMATELY 6" IN LENGTH AND THE STEEL THICKNESS IS 1/2" ANY QUESTIONS; PLEASE DON'T HESITATE TO ASK PRIOR TO BIDDING. I WILL DO MY BEST TO ANSWER. THANKS FOR LOOKING.
|
|
|
Counter Shaft Standard Base for 9" or 10K South Bend Lathe Model A, B or C
Counter Shaft Standard Base#PT 1944 N1 for 9" or 10K South Bend Lathe Model A. B or C with Horizontal Drive Includes pivot screws and nuts. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
Tool Post Wrenches 3/8"x 1/2" & 5/16"x 3/8" South Bend Lathe Clausing Craftsman
Rare offset double box tool tool post wrench 3/8" x 1/2" Williams textile pattern wrench 3/8 x 5/16
|
|
|
Lead Screw and Bearings for 9" or 10K South Bend Lathe Model C with 3' Bed
Lead Screw and Both Bearings for 9" or 10K South Bend Lathe Model C with 3' Bed Includes lead screw#AS300JWNK1. Right hanger bearing#AS5NK1, left hanger bearing#PT4NK1 and mounting screws, nut, washer and spacer. All in Very good condition. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
Pair of Early Bed Stands for 9" or 10K South Bend Lathe
Pair of Early Bed Stands#P8NK4 for 9" or 10K South Bend Lathe Model A. B or C Includes bolts. No cracks or repairs. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
Pair of Flat Belt Cone Pulleys with Cone Gear for 9" or 10K South Bend Lathe
Pair of Flat Belt Cone Pulleys and Cone Gear for 9" or 10K South Bend Lathe Model A. B or C Includes head stock pulley#AS14NK1 with 1 5/8" bore and 38T cone gear and countershaft pulley#AS103NK1 with 7/8" bore and set screw. All in very good condition. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
76T Bull Gear for 9" or 10K South Bend Lathe
76T Bull Gear#AS15NK1 for 9" or 10K South Bend Lathe Model A. B or C 4 7/8" OD. 1 5/8" bore, no broken or missing teeth, very good spring and plunger. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
CNC South Bend Lathe MagnaTurn 1218
CNC South Bend Lathe. Made in the USA, Machine is currently under power and running production parts with.0005 tolerance bores, everything on the machine is in good operating condition, comes with multiple tool holders and chuck jaws. Machine is perfect size to put in a garage. Can be used with regular rotary phase converter. We can load on to a flat bed trailer. Chuck Size 8” Swing Over Bed 12" Turning Diameter 8" Turning Length 12"18" Bar Capacity 1.625" X Axis Travel 5.25" Z Axis Travel 19" Spindle Nose/Bore A2-5/ 2.09" Spindle Speeds 100-4000 rpm Spindle Motor 15 HP Cutting Feedrates X"Z" 240" 240" Machine Weight Aprx. 4.810 lbs Machine Dimensions 77"x 48"x75”Tall This machine is listed for sale on other sites and we reserve the right to end the auction early. Machine ... moreis as-is. Where-is, no warranty implied or stated.
|
|
|
UNION 7 1/2 SELF CENTERING LATHE CHUCK ATLAS CRAFTSMAN SOUTH BEND METAL TOOL
Here is a decent original 7 1/2 union mfg co 556 hole measures 2 1/2 and 7 1/2 across Threads look good turns in and out nice. No mounting plate. BUY IT NOW OR SEND ME YOUR BEST OFFER. See my other listings for more lathe parts and chucks from large machinist estate.Shipping 12.65 USPS Priority
|
|
|
SWEETLAND LATHE CHUCK 6 IN. JAW SELF CENTERING ATLAS CRAFTSMAN SOUTH BEND
Here is a decent original Sweetland chuck hole in center 1 1/4 And 7 3/16 across Threads look good turns in and out nice. No mounting plate.BUY IT NOW OR SEND ME YOUR BEST OFFER. See my other listings for more lathe parts and chucks from large machinist estate.Shipping 12.65 USPS Priority
|
|
|
Starrett micrometers,south bend lathe,bridgeport milling machine
Starrett micrometers.All working condition. 1-2,2-3,3-4,4-5. Came from the shop of an old man who took good care of his tools
|
|
|
Metal Lathe 7 3/8" Heavy Face plate 1 1/2 X 8 South bend 9" 10k atlas Logan
Very nice Original South Bend lathe face plate. 7 3/8 in no rust. 1 tiny chip you can see in picture 3. threads look good please watch for my other listings, south bend lathe. Milling machine, machinist tooling! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-149cedad8fb-0x113-
|
|
|
South Bend Steady Rest from 10" South Bend Lathe, ID # SR-100
Here is a decent original South Bend SR100 steady rest. Threads look good bottom hold down looks like it was made not factory. see pictures. BUY IT NOW OR SEND ME YOUR BEST OFFER. See my other listings for more lathe parts and chucks from large machinist estate.Shipping 12.65 USPS Priority
|
|
|
6" SOUTH BEND SKINNER NO. 4206 LATHE CHUCK 4 JAWS 2-1/4"-8 TPI MACHINIST LOGAN
Here is a decent original South Bend Skinner 4206 lathe chuck measures 6 inches across mounting hole 2 1/4 inches 8 TPI thread. Threads look good adjust in and out well. see pictures. BUY IT NOW OR SEND ME YOUR BEST OFFER. See my other listings for more lathe parts and chucks from large machinist estate.Shipping 12.65 USPS Priority
|
|
|
Lufkin telescoping gages,south bend lathe,bridgeport milling machine
Lufkin 79-l telescoping gages. Case is aged but the gages look nice
|
|
|
South Bend Lathe 9 Cast Iron Leg Set
South Bend Lathe 9 Cast Iron Bench Leg Set one pair as shown removed from 9" South Bend lathe 1958 vintage stands approximately 30" high no cracks or damage- works as it should i would like to see these return to a South Bend lathe buyer may wish to clean or repaint to taste pickup at zip 54751 at buyer's convenience- payment required within five days of auction close items not paid for within this time frame are re-listed w/ nonpaying report filed with eBay I will ship only to your PayPal confirmed address bidders with less than less than ten positive eBay transactions must contact me before bidding please read and understand eBay and PayPal rules before bidding I follow these rules and expect bidders will do same- I have been buying. Selling, trading, collecting, and, most importantly, using vintage USA made wood and metal ... moreworking tools for more than twenty years. Please bid with confidence knowing that any tool I offer for sale has been selected with care and consideration informed by that experience. I do not hide flaws and use detailed descriptions and clear pictures to give you the bidder as much information as I can, to help you make an informed purchase. I would rather leave a tool on the shelf than have an unsatisfied buyer. I do not know everything. Nor do I present myself as an expert; just as an informed, honest seller. As a bidder, your responsibility is to consider carefully all the information I have offered. The pictures are the primary descriptor and supersede all other descriptions. Pictures are of the actual item offered for sale unless stated otherwise. Augment this information with your own knowledge and research. Ask questions! I will offer whatever honest answers I can. Purchase price refunds/ returns are accepted in the event I have expressly misrepresented an item or it's condition. Working together, I hope to make this a no hassle, FUN buying experienc
|
|
|
Doall gauge block set,south bend lathe,bridgeport milling machine
80+ Doall gauge blocks. A few are missing and 1 that I see has a chip. Otherwise they are in fine usable condition
|
|
|
How To Run A Lathe, South Bend, 53rd Edition 1954
How To Run A Lathe. South Bend, 53rd Edition 1954 For sale is a nice vintage book from South Bend Lathe Works. The covers are dirty but there are no tears or creases. The only writing is the former owner's name on the inside of the back cover. There are no missing pages. No rips or tears, no dog ears, this book is in great shape. I will ships this for free via USPS Media Mail. If you prefer Priority Mail there is a $3.00 up-charge. Thank you for looking! I am happy to answer any and all questions!
|
|
|
6 IN Cushman 614 C Lathe Chuck 4 Jaw 2 1/4 8 TPI South Bend Back Plate 8352 S305
Here is a decent original Cushman 614 C lathe chuck measures 6 inches across. Back mounting plate looks to be for a South Bend 8352 S-305-N. Threads measure 2 1/4 inches with 8TPI. Chuck has good threads adjusts smooth in and out. Look good From an estate see pictures and my other listing BUY IT NOW OR SEND ME YOUR BEST OFFER. See my other listings for more lathe parts and chucks from large machinist estate.Shipping 12.65 USPS Priority.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-149d605836b-0x105-
|
|
|
South Bend Heavy 10 Lathe Follow Rest Nice Shape Hard To Find
South Bend Heavy 10 Lathe Follow Rest Nice Shape Hard To Find
|
|
|
5C indexing head,south bend lathe,bridgeport milling machine
5C index head.There's no name on it but is very well made. Shipping listed may not be the shipping to you. Ill ship to you as cheap as possible through either USPS or ups
|
|
|
19 1/2" x 1/2" LINK BELT COULD B4 ATLAS CRAFTSMAN SOUTH BEND LATHE
METAL LATHE LINK BELT LENGTH IS 19 1/2" WIDTH IS 1/2" SHOW VERY MINOR WEAR IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! I NO LONGER SHIP TO MEXICO! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. ... moreI WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
2 STEP "V" BELT PULLEY SOUTH BEND LOGAN ATLAS METAL LATHE
2 STEP"V" BELT PULLEY 2 7/16" INSIDE OF BIG PULLEY 1 1/8" INSIDE OF SMALL PULLEY HOLE IS 5/8 KEYED THE WIDTH OF THE TOP OUTER EDGE OF EACH PULLEY IS 5/8" PROBABLY FOR A SOUTH BEND 9" OR 10k LATHE MOTOR IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! I NO LONGER SHIP TO MEXICO! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My ... morefeedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
SOUTH BEND LATHE ATLAS CRAFTSMAN CUSTOM MADE TOOL HOLDER TURNING & BORING
Up for auction is this hand made lathe tool holder. This is very nicely made and appears is was made in August 1925? This holds 5/16" tools and the shank is 1.100" X 0.500" This would be perfect for a 9 or 10" lathe of any brand. I got these with a lathe I purchased. Please look the pictures over. These are sold as is. If you have any questions feel free to email me. I will combine shipping and I will ship international so please ask. Thank you.
|
|
|
SOUTH BEND LATHE ATLAS CRAFTSMAN CUSTOM MADE TOOL HOLDERS TURNING & BORING
Up for auction is this lot of 2 hand made lathe tool holders. These are very nicely made and come with the carbide tools. The one tool holder allows the cutter to be perpendicular in order to serve as a boring bar. These hold 1/4" tools and the shanks are 0.950" X 0.700" These would be perfect for a 9 or 10" lathe of any brand. I got these with a lathe I purchased. Please look the pictures over. These are sold as is. If you have any questions feel free to email me. I will combine shipping and I will ship international so please ask. Thank you.
|
|
|
JACOBS LATHE DRILL CHUCKS MORSE TAPER 1 & 2 SOUTH BEND LATHE ATLAS CRAFTSMAN MT2
Up for auction is this lot of 4 drill chucks. 2 are morse taper 2 and 2 are morse taper 1. 3 are Jacobs brand and 1 is Almond company. I got these with a lathe I purchased. Please look the pictures over. These are sold as is. If you have any questions feel free to email me. I will combine shipping and I will ship international so please ask. Thank you.
|
|
|
South Bend L00 long taper lathe spindle for Heavy 10 10L chuck RARE!!
Up for sale is this South Bend L00 long taper spindle. This spindle will fit the South Bend Heavy 10 lathe. 10L. This L00 spindle was an option($$) when ordering a 10L and is infinitely better than the more common threaded spindle. With this spindle you can now run your lathe in reverse without the fear of the chuck spinning off. In addition, this spindle is much more accurate than its threaded counterpart. This is in good condition with no excessive scaring or galling on the spindle journals. This is just as it was removed from the lathe, I have not cleaned it. This was very smooth spinning when I removed it. This is ready to install and use right away. No extra parts are needed to install this in place of a threaded unit. This is a rare piece to find on its own and for me I had to buy the whole lathe to get it! Please take a look at my ... moreother auctions as I will be listing lots of other South Bend parts. If you have any questions feel free to email me. I will combine shipping and I will ship international so please ask. Thank you.
|
|
|
13" South Bend Lathe Wide Drive Gear for Quick Change Gearbox 66 teeth
South Bend Lathe 13" or maybe heavy 10" drive gear for quick change gear box. The gear that mounts on the shaft coming out of the boss that carries the banjo arm. 4.845" OD. Root of teeth dia. 4.550" 0.75" bore, 1.440" wide or thick, 66 teeth tooth DP is 14? I know this gear fits a 13" south bend 1950's vintage. It interchanges with my lathe. Ask questions! You will not be able to return this unit!
|
|
|
South Bend Lathe 10L Heavy 10 taper attachment main body slide
Up for sale is this South Bend heavy ten 10L lathe taper attachment main body and taper slide. This has been taken apart. Cleaned then reassembled. The gibs have been stoned flat and reassembled. This is in good condition as the pictures show and is very smooth. This is ready to use. Please take a look at my other auctions as I will be listing lots of other South Bend parts as well as parts for this taper attachment. If you have any questions feel free to email me. I will combine shipping and I will ship international so please ask. Thank you.
|
|
|
4 morse taper live center,south bend lathe,bridgeport milling machine
4mt live center. Trade mark and Japan stamped in to the side.
|
|
|
2 HS Part Cut-Off Blades 13/16" Lathe Tool Bit Machinist Gunsmith South Bend Lot
This auction is for a lot of 2 used Acme Grooving Tool HSS part cut-off Blades Shank is 13/16" by 1/8" thick Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures show same items from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
|
|
|
CRAFTSMAN 8" 4 JAW REVERSING LATHE CHUCK 1 1/2" x 8 TPI Atlas South Bend Logan
This item is a Craftsman brand 4 jaws reversing chuck. P/N 101-21581. It was made in England. It fits lathes(Atlas, South Bend, Logan and others) with 1-1/2" X 8TPI mounting. The threads are in excellent condition and jaws move smoothly.
|
|
|
Antique TOOL BOOK SET of 2 "HOW TO RUN A LATHE" SOUTH BEND LATHE CO.
Antique TOOL BOOK SET of 2"HOW TO RUN A LATHE" SOUTH BEND LATHE CO.
|
|
|
Antique TOOL BOOK SET of 8 "HOW TO RUN A LATHE" SOUTH BEND LATHE CO.
Antique TOOL BOOK SET of 8"HOW TO RUN A LATHE" SOUTH BEND LATHE CO.
|
|
|
ATLAS LATHE SOUTH BEND WATER PROOF PLUNGER TRIP SWITCH
THIS SWITCH IS USED TO TURN ON OR OFF THE COOLANT WATER PUMP THE HOUSING IS CAST ALUMINUM SWITCH RATED 125 VOLTS AT 15 AMPS HEAVY DUTY MUST BE MACHINE MOUNTED
|
|
|
SOUTH BEND 10k LATHE COLLET RACK FOR 6K COLLETS
SOUTH BEND 10k LATHE COLLET RACK FOR 6K COLLETS ALL OF THE METAL PARTS ARE IN VERY VERY GOOD CONDITION. THE RACK IS 6 1/2" X 6 1/2" X 3/4" THICK IT HOLDS 20 COLLETS THE OAL OF THE BAR IS 10" THE RACK FOR THE COLLETS IS MADE OF WOOD AND WORKS FINE. THE WOOD IS IN GOOD CONDITION. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, ... moreand before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
South bend lathe 9" saddle clamp and bolt
This is the saddle clamp and bolt for the 9" south bend lathes taken from a model A. I will combine multiple purchases to save on shipping. Good luck and Happy bidding!
|
|
|
Tapmatic 50x,south bend lathe,bridgeport milling machine
Tapmatic 50x with straight shank. Seems in nice condition
|
|
|
Buck 6" 4 Jaw Lathe Chuck fits Atlas Craftsman Logan South Bend with 1-1/2" 8TPI
Has 1-1/2" 8TPI integrated mount(no back plate) very nice chuck. All the jaws are tight and operate smooth and are reversable. 6" diameter will fit Atlas Craftsman, and some Logan, Sheldon and South Bend lathes as well as others with this spindle nose. Uses 1/4" key included but has a bent handle. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LARGE COLLECTION OF SOUTH BEND LATHE & MACHINE LITERATURE
This is a collection of 26 original catalogues and price lists from the South Bend Lathe Company. In addition to lathes. Other items, such as milling and drilling machines are covered. Thes items were received by me many years ago when I was on the Company mailing list. This an unique opportunity to acquire a comprehensive range of South Bend literature. Royal Mail International Standard is shown for overseas postage. This does not have tracking nor Signature on delivery and is not covered by Ebay Buyer Protection. It does have £20 Compensation. If an Overseas Bidder would like to use the Royal Mail International Tracked and Signed, please ask for a quotation before bidding. NOTE: May I thank a Member for pointing out that I initially listed this item with the wrong pictures. I apologise and have now corrected my error.
|
|
|
VERY NICE 1/2 HP FORWARD REVERSE MOTOR & PREWIRED SWITCH 4 SOUTH BEND LATHE
Very Nice- Lesson 1/2 HP. 1725 rpm capacitor start 110 volt with pre-wired forward and reverse motor switch. Unit was mounted to a South Bend 9" lathe countershaft assembly. The original South Bend two step motor pulley that is on the unit was damaged, as shown, by attempting to remove. Possible set screw broken off, but it does not appear that way when looking in the set screw hole. No visable damage at all to shaft. Motor runs quiet and cool. Shaft is 5/8" diameter x 2" long. The wiring appears to be professionally done. All cords and connections are newer and cords are very flexible and in excellent condition. Cord from motor to forward and reverse switch is 5 1/2 feet long. Cord from the forward and reverse switch to the 110 volt cord cap is also 5 1/2 feet long. Forward and reverse motor switch makes solidly in all three ... morepositions. Bolt mounting pattern is 3 5/8" to 6 1/8" front to back slots. 3" side to side on center. Very nice prewired motor unit. Insurance is included in shipping fee. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VERY NICE SOUTH BEND 9 10K LATHE 2 STEP PULLEY HORIZONTAL DRIVE COUNTERSHAFT
Very Nice- Original countershaft assembly with motor mounting bolts and drive belt for a 9" or 10K horizontal drive South Bend lathe. Pulleys run straight and true. Oilers are present and in good order. Bearings are in good order. Casting is stamped 1940N2. Nice drive belt is included. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MT2 Jacobs Chuck No3 For South Bend Jet Delta Craftsman Lathe MT2 Morris Taper
0-17/32 capacity. MT2 Morris Taper, Jacobs chuck No3 for lathe, mill or drill press. Works great, just purchased but its to big for my mini lathe. No chuck key, sold as pictured. Great condition.
|
|
|
D.E.WHITON 5" 3-JAW LATHE CHUCK 1-1/2" x 8 MOUNT -VINTAGE ATLAS LOGAN SOUTH BEND
This auction is for a vintage 5" D.E.Whiton 3-Jaw lathe scroll chuck. This chuck has a 1-1/2" x 8 tpi backplate(some holes in it but fully functional) It has a nice smooth firm movement. There is a key included(probably not original key) but no reverse jaws I'm afraid. I'm offering this including the Priority mail shipping so get it while you can. FREE PRIORITY SHIPPING ALWAYS INCLUDED(Items usually ship out the same day! CHECK OUT MY END MILLS AND INSERTS FOR SOME OF THE BEST PRICES(AND SERVICE) ON EBAY!
|
|
|
Buck adjust tru chuck 2-1/8"-8,south bend lathe,bridgeport milling machine
6" buck adjust tru chuck threaded 2-1/8"8.No chuck key.i think there would be enough material to possibly open it up to 2-1/4"8 but verify that before bidding
|
|
|
EXCELLENT FLAME HARDENED ORIGINAL SOUTH BEND 9 10K LATHE BED 3 1/2' - 42" LENGTH
Hard to Find- Excellent Condition- Original South Bend 9" 10K 3 1/2 Foot Flame Hardened Bed with original rack and leveling leg set. R etains original badging. Which is very nice. Bed is stamped"DDB102KG" on the rear rail and"40788K" on the forward rail. No imperfections on bed rails. Bed was lightly cleaned up with oil. Unit does clean up nicely. Any dark areas that are seen are nothing more than built up grease, which does break down. Assembly was removed from a newer model South Bend 10K underdrive unit. Excellent Condition. Lathe bed is shown on a metal bench. Which is not included. It is just being used for photos. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast ... moreand easy and manage your active items.
|
|
|
NICE LOT OF 3 LATHE DOGS 4 ATLAS CRAFTSMAN SOUTH BEND LATHE 1 3/16" 7/8" 1/2"
Nice Lot of 3 Lathe Dogs for an Atlas. Craftsman, or South Bend Metal Lathe. Dog sizes are 1 3/16" marked"1653TH1 2" 7/8" no markings, and 1/2" marked"Vulcan No 2 Forged USA" If you plan on purchasing multiple items I would be glad to combine shipping. Pease do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-149ef054b9f-0x113-
|
|
|
LOT OF 2 MT2 DEAD CENTER FOR ATLAS CRAFTSMAN SOUTH BEND LOGAN METAL LATHE
Lot Of 2 MT2 Dead Center for Metal Lathe Machinist. Units both measures 3 7/8" long. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIGINAL SOUTH BEND 9" 10K LATHE 80 TOOTH 80T IDLER GEAR PART 33N1
Excellent Condition- Original South Bend 80 tooth idler gear for a 9" or 10K South Bend lathe. 1/2" raised hub. Bore diameter 5/8" 4 9/16" OD. Stamped with South Bend part number 33N1. In excellent condition, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIGINAL SOUTH BEND 9" METAL LATHE CHANGE GEARS LOT TOWER SET OF 10
Excellent Condition- Possibly never used- Original set of 10 South Bend threading change gears for South Bend 9" lathes. These gears have a 9/16" bore with a single 1/8" wide keyway and are 3/8" thick. The tooth count is as follows: 32. 36, 40, 44, 46, 48, 52, 54, 56 and 60. In excellent condition, as shown. Shipping cost includes insurance. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCEPTIONAL SOUTH BEND 9 10K MODEL A LATHE 42 BED QUICK CHANGE LEAD SCREW 38 1/2
Exceptional Condition- Original quick change lead screw for a 3 1/2 foot bed South Bend 9" or 10K lathe. The keyed lead screw is 38 1/2" end to end. Threaded length is 30 3/8" Diameter is 3/4" Unit includes woodruff key and nut. Unit has seen very little use, in exceptional condition, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
South Bend 9" Lathe Thread Dial. southbend 9a machinist tool
Very nice condition. Gear has lots of meat left. Spins nice and free, it is oiled and ready to go! PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. ... moreIF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.
|
|
|
LATHE SPINDLE THREAD PROTECTOR 1" x 10 tpi - SOUTH BEND LOGAN CLAUSING WOOD
This auction is for a lathe spindle thread protector. Fits a 1" x 10 tpi spindle. I'm not sure if this is factory or shop made but it's quite heavy duty and has a nice knurled edge and hole for a spanner(not included) The sizes etc. are shown in the pictures. FREE Priority Mail shipping is included in the price so get it while I've got it!
|
|
|
ORIGINAL SOUTH BEND 9" LATHE APRON FROM MODEL A MAY FIT 10k
Lower apron casting from South Bend model A serial number 389- 07- 5986. May fit others such as 10k. But please confirm before purchase. See my other items, I am always happy to combine shipping.
|
|