In 
 
Order by: 
Available to: 
Price: 
 - 
$
7.05
Buy It Now
Free Shipping
Condition: New
Location: Alvord, United States
Belt A/4L 1/2 x 48in OC.
$
7.02
Buy It Now
Free Shipping
Condition: New
Location: Alvord, United States
South Bend Lathe flat drive belt custom cut Important Note: If you do not provide a belt length at time of purchase you will be shipped the default length ... moreof 70" Use ebay's message system or use the"notes to seller" to indicate length. South Bend Lathe flat drive belt custom cut New high performace multi-ply belting Outlasts the original by many years Each belt is custom cut and laced to order You can order up to 70" maximum length by 1" wide Everything we sell is in our warehouse Questions call: 260-723-4946
$
7.09
Buy It Now
Free Shipping
Condition: New
Location: Alvord, United States
Belt A/4L 1/2 x 49in OC.
$
7.05
Buy It Now
Free Shipping
Condition: New
Location: Alvord, United States
South Bend Lathe flat drive belt custom cut Important Note: If you do not provide a belt length at time of purchase you will be shipped the default length ... moreof 70" Use ebay's message system or use the"notes to seller" to indicate length. South Bend Lathe flat drive belt custom cut New high performace multi-ply belting Outlasts the original by many years Each belt is custom cut and laced to order You can order up to 70" maximum length by 1" wide Everything we sell is in our warehouse Questions call: 260-723-4946
$
15.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
The manual has about13 pages. South Bend Model O Lathe Parts Manual. About this manual : This is a high quality reproduction manual which has been scanned ... morewith a high resolution scanner. Type of Manual : Parts.
$
199.99
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown, United States
Condition is "Used".
$
15.95
Buy It Now
Condition: New – Open box
Location: Mebane, United States
How to Run a Lathe: How to Erect. Care for and Operate a Screw-Cutting Engine Lathe, For the Beginner, Revised Edition No. 19. By O’BRIEN BROTHERS J.J. ... moreO’Brien and M.W. O’Brien, originally published by South Bend Lathe Works, South Bend, Ind. 1919. Reproduced in 2014 by Nation Builder Books, Mebane, NC. 5¼ x 8 paperback, 80 pages. Please note this is a new. Photocopied reproduction, NOT AN ORIGINAL. The accompanying pictures were scanned from a reproduction, not the original. And please note this is the 1919 edition, NOT the more popular 1942 edition. Founded in 1906 in South Bend. Indiana, South Bend Lathe Works, at one time accounted for almost half all metalworking lathes sold domestically. One of SBLW’s keys to its market dominance was SBLW’s painstaking effort to provide clear, well-illustrated, low-cost instructional materials on how to set up and run their tools, and how to use SBLW tools to perform a wide array of basic and advanced machining operations. The most widely known and sought after of SBLW’s publications was its classic pamphlet How to Run a Lathe. First published in 1914. How to Run a Lathe. was updated and reissued annually for decades. And has often been reprinted. The 1942 edition, in particular, is highly regarded as a thorough introduction to metal cutting lathe work, and is usually the first book placed in the hands of beginning students. The 1942 edition, which ran to 128 pages, was a mainstay of the Lindsay Technical Books catalog for two decades, and is still in wide demand. This edition is so dissimilar from the 1942 edition that they really should be considered separate books. Spindle speeds increased from belt-driven 150 to 275 rpm in the 1910s. To a range of 274 to 579 rpm using electric motors in the 1940s. The metallurgy of cutting tools had advanced considerably in the two decades between these two editions, allowing, for example, a doubling of cutting speed for annealed tool steel from 25 fpm in 1919, to 50 fpm in 1942. The cutting speed for machine steel went from 35 fpm
$
114.85
Buy It Now
$24.49 Shipping
Condition: New
Location: Saint Charles, United States
SHARS 4" 4 Jaw Self Centering Lathe Chucks w/ Cert. TIR + 1-1/2-8 Back Plate New. For back plate you would not need to drill any mounting holes but you ... morewill need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
26.39
Buy It Now
$16.10 Shipping
Condition: Used
Location: Morris Plains, United States
NO EXCEPTIONS.
$
89.00
Buy It Now
$9.45 Shipping
Condition: Used
Location: Milroy, United States
Approx 5" dia x 1 1/2"-8 TPI mount. good used lathe dog drive plate.
$
17.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! Overview: I have collected this information for many years and have found the information they ... morecontain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed.
$
13.00
Buy It Now
Free Shipping
Condition: Used
Location: Elmer, United States
South Bend, Indiana.
$
349.99
Buy It Now
$35.50 Shipping
Condition: Used
Location: Webster, United States
Because of this, they are sold AS IS, as found.
$
7.13
Buy It Now
Free Shipping
Condition: New
Location: Alvord, United States
South Bend Lathe flat drive belt custom cut Important Note: If you do not provide a belt length at time of purchase you will be shipped the default length ... moreof 70" Use ebay's message system or use the"notes to seller" to indicate length. South Bend Lathe flat drive belt custom cut New high performace multi-ply belting Outlasts the original by many years Each belt is custom cut and laced to order You can order up to 70" maximum length by 1" wide Everything we sell is in our warehouse Questions call: 260-723-4946
$
7.36
Buy It Now
Free Shipping
Condition: New
Location: Alvord, United States
South Bend Lathe flat drive belt custom cut Important Note: If you do not provide a belt length at time of purchase you will be shipped the default length ... moreof 70" Use ebay's message system or use the"notes to seller" to indicate length. South Bend Lathe flat drive belt custom cut New high performace multi-ply belting Outlasts the original by many years Each belt is custom cut and laced to order You can order up to 70" maximum length by 1" wide Everything we sell is in our warehouse Questions call: 260-723-4946
$
6.90
Buy It Now
Free Shipping
Condition: New
Location: Alvord, United States
South Bend Lathe flat drive belt custom cut Important Note: If you do not provide a belt length at time of purchase you will be shipped the default length ... moreof 70" Use ebay's message system or use the"notes to seller" to indicate length. South Bend Lathe flat drive belt custom cut New high performace multi-ply belting Outlasts the original by many years Each belt is custom cut and laced to order You can order up to 70" maximum length by 1" wide Everything we sell is in our warehouse Questions call: 260-723-4946
$
3.97
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
South Bend Lathe Manual No. 33-J. this manual. Loaded with illustrations, instructions, photos, and diagrams. Works great on Your. Format on CD. phone, ... moreipad, Lenovo, Tablet, Microsoft Surface, Mac, Mac Book or Computer.
$
22.45
Buy It Now
$2.99 Shipping
Condition: Used
Location: Minneapolis, United States
ORIGINAL SOUTH BEND LATHE BRASS SPANNER WRENCH 3201N1. 1/4" PIN. CLEAN AND GREAT, VERY LITTLE USED CONDITION. Please let the pictures help with the ... moredescription and condition and view my other auctions for MORE LATHE TOOLING. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
$
43.99
5d 5h 38m 14s
0 bids
$57.19 Now
$3.88 Shipping
Location: Saint Joseph, United States
$
5.97
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
Manual is on CD. Loaded with illustrations, instructions, photos, and diagrams. Format on CD. 32 Pages -.
$
2.47
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
South Bend Lathe Manual No. 402. this manual. phone, ipad, Lenovo, Tablet, Microsoft Surface, Mac, Mac Book or Computer. Loaded with illustrations, instructions, ... morephotos, and diagrams. Works great on Your.
$
19.99
Buy It Now
$4.70 Shipping
Condition: Used
Location: Chesterfield, United States
Up for sale is a rare South Bend lathe catalog No. 90-A.
$
425.00
Buy It Now
$17.70 Shipping
Condition: Used
Location: Millstadt, United States
115V motor. Rated for 2850-10000 rpm. Runs good. No Mount hardware.
$
45.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! South Bend How to Run a Lathe Click for Our Complete Catalog Manual Description: Number of Pages: ... more79 This is a reproduction. Not a photocopy, of an original South Bend How to Run a Lathe 24th Edition. This manual covers South Bend lathes made in the early years circa 1906-1930s. This is the operators manual that South Bend made for their 9"24" lathes produced in that time frame. It covers everything shown in the contents section listed below and more. For your continence. I have printed up three different version of this How to Run a Lathe manual to cover the large span of lathes that South Bend produced from 1906 to the late 1900s. The approximate date of the manuals I have are from 1906-1930s, 1930s-1950s, and 1950s-late 1900s. Some of the manuals overlap on certain machines and parts, because South Bend didn't change every machine and part at precise times, but I can help you match the appropriate manual with your machine. I reproduced this manual. Because of the many request from my customers that wanted a cleaner larger manual that is easier to view. This manual has been enlarged from 5.25"x7.5" to 8.5"x11" and is laser printed. It is comb bound so it lays flat on the work bench. Like all of my other manuals, I have digitally edited every page so it looks as good or better than the original. I am aware that there are original versions of this manual sold on eBay. But I am not trying to compete with those manuals. This manual was reproduced for my South Bend customers that have requested it. Contents: Gear Box: Most of the lathes made for the time frame covered by this manual were made without gear boxes for threading. But some did have a gear box. Below is a picture of the gear box that was used in this time frame. Other Pictures: Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual wi
$
32.50
Buy It Now
$18.00 Shipping
Condition: New
Location: Canada
This sale is for 1 NOS Impex Tools 3 way Knurling Tool Holder No. 1114. Shank is approximately 1-1/8" x 1/2" A scale shown is for size reference only ... moreand not part of the sale. We ship Wednesday through Friday and are happy to combine orders for shipping. Thank you for looking.
$
17.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! South Bend How to Cut Screw Threads in the Lathe Click for Our Complete Catalog Manual Description: ... moreNumber of Pages: 20. This is a reproduction. Not a photocopy, of an original South Bend How to Cut Screw Threads in the Lathe Manual. Contents: Introduction.1&2 Terms.3 Screw Thread Tables.4 Gear Setup.5 Compound Gearing.6 Thread Cutting Tools.7 Tool Positions.8 Compound Rest Position.9 Thread Cutting Stop.10 First Cut.11 Oiling.12 Thread Dial.13 Finishing the End of a Threaded Piece.14 Cutting Multiple Screw Threads.15 Cutting Left Hand Screw Threads.15 Metric Screw Threads.16 Mounting Work.17 Adjusting Levers of Gear Box.18 Calculate Change Gears.19 Using Taps and Dies.20 Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my
$
199.99
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown, United States
Condition is "Used".
$
39.99
Buy It Now
$9.00 Shipping
Condition: Used
Location: Yorktown, United States
Condition is Used.
$
2.97
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
HERE WE HAVE A VINTAGE SOUTH BEND LATHE WORKS BULLETIN NO. 34;WHAT TO MAKE ON THE LATHE PRINTED IN 1936. THIS IS AN ORIGINAL NOT A REPRODUCTION. IT IS ... moreIN EXCELLENT CONDITION WITH SOME LIGHT WARE TO THE COVERS. THE INSIDE PAGES ARE EXCELLENT AND CLEAN. THERE ARE SOME COOL PHOTOS OF WHAT PEOPLE MADE WITH THEIR LATHES AND OF COURSE BLUEPRINTS. PARTS AND OTHER ADVERTISING FOR SOUTH BEND. PLEASE LOOK AT ALL PHOTOS AND ASK ANY QUESTIONS YOU MAY HAVE. REMEMBER THAT I SELL MOSTLY ANTIQUE AND VINTAGE ITEMS AND THAT THEY ARE MOSTLY LIKELY NOT BE PERFECT DO TO THE NATURE OF THEIR AGE. IF YOU HAVE A PROBLEM PLEASE CONTACT ME BEFORE LEAVING FEEDBACK. 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e031a869d-0xf0-
$
14.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
It covers the importance of keeping your lathe well oiled and how to go about oiling it properly. It shows the oiling locations of the lathe, and how ... moreoften each should be lubricated. Each South Bend lathe owner should own these manuals to help to keep their lathe in top notch operation.
$
12.98
Buy It Now
$5.30 Shipping
Condition: Used
Location: Roanoke, United States
Up for sale is a trade catalog/brochure put out by the South Bend Lathe Works featuring Precision Machine Tools dated 1949. Contains 16 pages in all. ... moreGood condition, creased down the middle and shows a little wear.
$
495.00
Buy It Now
$66.35 Shipping
Condition: Used
Location: Rochester, United States
Southbend Lathe 16/24" 4jaw Chuck Cushman 71/2"dia #4207 23/8"-6tpi Rev jaws Hi.
$
19.99
Buy It Now
$3.19 Shipping
Condition: Used
Location: Atwater, United States
SOUTH BEND 10K 10" LATHE BROCHURE FROM 1970'S. COVERS THE LATHE AND ACCESSORIES, 3 PAGES .
$
77.65
Buy It Now
$24.49 Shipping
Condition: New
Location: Saint Charles, United States
For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back ... moreplate more concentric with the lathe spindle and reach chuck's TIR.
$
89.99
Buy It Now
$5.65 Shipping
Condition: Used
Location: Nashville, United States
As shown, good threads & keyway, bolt is 5/16".
$
250.00
Buy It Now
$20.00 Shipping
Condition: Used
Location: Mahwah, United States
The steal collet is marked Prost Bros. Chicago the other collet is not and the close only has a "6" on it. Steal Collet shank dia.602, 2 to the threads ... moreand 2 5/8 over all, key way 1/8, 26 tpi. Brass Collet shank dia.
$
99.00
Buy It Now
$16.10 Shipping
Condition: Used
Location: Milroy, United States
8" dia x L00 mount. good used lathe dog drive plate. Genuine South bend lathe USA.
$
19.89
Buy It Now
$4.00 Shipping
Condition: Used
Location: Diamond Point, United States
Includes photos and a bit of info on the Atlas F Series, South Bend Tool Room Bench lathe, Sheldon 12" U-type, LeBlond 13" Super Regal, Monarch model ... moreW, Warner and Swasey 2-A Universal. make Supersized seem small.
$
19.99
Buy It Now
Free Shipping
Condition: New
Location: Naperville, United States
Each manual has been digitally reproduced and "cleaned up" by a professional computer artist to achieve the best results possible with the existing data ... moreavailable. This particular manual contains 68 pages total.
$
65.00
Buy It Now
$9.95 Shipping
Condition: Used
Location: Garden Grove, United States
The following item is up for SALE - 1 - Craftsman South Bend 5 1/8" D Lathe Face Plate with 1 1/2 " x 8 TPI LOT # 3 I do not have RESERVE PRICING on any ... moreof my listings and also offer DISCOUNTED shipping if you would like to make multiple purchases. Thanks for the interest in this item PLEASE visit my store for more available items.
$
99.95
Buy It Now
Condition: New
Location: Saint Charles, United States
For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
25.00
Buy It Now
$6.15 Shipping
Condition: Acceptable
Location: New Brunswick, United States
This catalogue is from 1936 and has 32 pages inside. The catalogue is in overall fair to good condition. Page 29-30 has the bottom part torn out.
$
2.97
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
6801 - Machines Tools and Accessories. 1967 South Bend Lathe Manual No. Manual is on CD. Loaded with illustrations, instructions, photos, and diagrams. ... moreFormat on CD. 52 Pages -.
$
25.00
Buy It Now
Free Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. ding or mark ... moreon everything. If I can not then I must take pictures of everything.
$
2.47
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
1930-1931 South Bend Lathe. Tablet, Microsoft Surface, Mac, Mac Book or Computer. Works great on Your phone, ipad, Lenovo. Loaded with illustrations, ... moreinstructions, photos, and diagrams.
$
2.47
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
Series S Lathes 1936. South Bend Lathe Manual No. 95. this manual. Loaded with illustrations, instructions, photos, and diagrams. Works great on Your. ... moreFormat on CD. phone, ipad, Lenovo, Tablet, Microsoft Surface, Mac, Mac Book or Computer.
$
225.00
Buy It Now
$56.10 Shipping
Condition: Used
Location: Christiansburg, United States
1.5"-8 threading of the back plate.
$
650.00
Buy It Now
$129.39 Shipping
Condition: Used
Location: Yorktown, United States
Dumore #5 The Master 1/2hp 115V Metal Lathe Tool Post Grinder. Condition is "Used". Someone has made a spindle arbor extension for use with 1-1/4” hole ... moregrinder wheel like those found on tool and cutter grinders and left over wheel remnants from surface grinders.Actual item pictured.Be sure to view our other items for more great tooling finds.
$
4.97
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
South Bend Lathe Manual No. 101A. Underneath Belt Driven Series O 1933. this manual. Loaded with illustrations, instructions, photos, and diagrams. Works ... moregreat on Your. Format on CD. phone, ipad, Lenovo, Tablet, Microsoft Surface, Mac, Mac Book or Computer.
$
33.50
Buy It Now
Condition: New
Location: Saint Charles, United States
202-5489. Thread size: 1-1/2- 8, Diameter A: 5.079" B: 709" C: 394" D: 2.677" How to process back plate to guarantee Chuck's T.I.R? ... moreThe semi-machined back plate has to be processed into fully-machined which is showed in the above fig before they can be mounted. The fully-machined back plate can be mounted onto 5" 3 jaw or 4 jaw self centering and independent lathe chuck(p/n 202-5594) All back plates have 0.04" allowance. Please measure the size of Chuck's D1 before process your back plates. The size of back plates's D1 should be a little bit smaller than the size of Chuck's D1. Because the gap between back plate and chuck is smaller. Chuck's TIR is better. No gap is the best. You would not need to drill any mounting holes but you will need to turn the shoulder down.040" to match the back of the lathe chuck to make the chuck& back plate more concentric with the lathe spindle. When turning the shoulder of the backing plate. ONLY TURN THE SHOULDER OF THE BACKING PLATE WHEN ATTACHED TO THE LATHE SPINDLE. If you use a chuck to clamp the backing plate and then turn it, the backing plate will not be true to the lathe spindle and will have more runout than specified when the chuck and back plate are put together. Semi-machined, We have matching LATHE CHUCKS available: Lathe Lathe Chuck Diameter Brand Model Swing Spindle Thread 3" 4" 5' 6' Atlas, 6" 1/2"20, 202-6231, Atlas, 10100, 6" 1"10, Atlas, TH42, 10" 1-1/2"8, Atlas, 5991, 12" 1-1/2"8, Atlas, 3986, 12" 1-1/2"8, Emco Maier, Maximat V10, 5" M39x4mm, Grizzly, G8688, 7" 3" Flange, Grizzly, G4000, 9" M39x4mm, Harbor Freight, 33684, 7" 3" Flange, Harbor Freight, 45861(BV20) 9" M39x4mm, Homier, 03911, 7" 3" Flange, Jet, 920N, 9" 1-1/2"8, King, CH-920 AG, 9" M39x4mm, Logan, 9" 1-1/2"8, Logan, 10" 1-1/2"8, Logan, 11" 2-1/4"8, 202-6234 Logan, 12" 2-1/4"8
$
7.95
Buy It Now
$10.00 Shipping
Condition: Used
Location: Olmsted Falls, United States
Little to no marks.
$
14.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
This is the first manual in a series of four manuals put out by South Bend to help the lathe owner to take good care of their lathe. The manual has about15 ... morepages. South Bend Keeping Your Lathe Clean.
$
3.00
Buy It Now
$3.50 Shipping
Condition: Used
Location: Wayland, United States
PARTIAL SCAN.
$
550.00
Buy It Now
$21.50 Shipping
Condition: Used
Location: Nashville, United States
5” South Bend Lathe Heavy 10 13 3 Jaw Cushman 2-1/4”-8 Chuck 3505 P625. Scroll gearing is in marvelous shape. No repairs breaks or surprises. Chuck is ... moretight and well centered on an original Southbend backing plate. Inside jaws measure .0025TIR, measured in my south bend heavy 10 which is pretty accurate for a three jaw.Comes complete with inside and outside jaws as well as the original key.No stresses, cracks, repairs, breaks, or surprises. This is really a fantastic Chuck.
$
184.90
Buy It Now
Condition: New
Location: Saint Charles, United States
For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
59.99
Buy It Now
$8.65 Shipping
Condition: Used
Location: Nashville, United States
Nice underneath drive tension bracket assembly for South Bend 9" and 10K lathes.
$
49.99
Buy It Now
$23.50 Shipping
Condition: Used
Location: Webster, United States
Because of this, they are sold AS IS, as found. WE WILL NOT!
$
99.99
Buy It Now
$11.90 Shipping
Condition: Used
Location: Ivoryton, United States
3/8" thick large gear. 5/8" Bore ID. Inventory # (2769). The rare South Bend Model 405-Z used special 20 DPI gears. This will not fit a standard 9" Precision ... moreA, B or C model lathe. Good gear. See photos.
$
45.00
Buy It Now
$12.65 Shipping
Condition: New
Location: Baltimore, United States
The ice pick constitutes one single piece (fixed blade). The ice pick is totally custom made on my SOUTH BEND lathe. Very strong thing, with excellent ... morefeel in your hand. Super strong solid and very well balanced.
$
17.00
Buy It Now
$4.75 Shipping
Location: Austinburg, United States
 In 

Past Items  
 
Used but good condition adapter plate for 6" lathe chuck. Item shown sign of use but will not affect function of part. Plate has"R.H.K" and"10" markings on smooth side. 3) 3/8-16 holes on a Ø5.46" bolt pattern. 1-13/16-8 threads for mounting to lathe look to be in great condition. Ø6-1/8 x 1-3/8 overall dimensions. Plate was recently removed from a Cushman lathe chuck.
Pair of chip pan brackets from a South Bend Heavy 10" lathe(not 10k) Part number 467R2 All parts are as removed and very dirty. Will need a good cleaning.
Apron star clutch assy from a South Bend 16" lathe. Dirty/ greasy. Small screw in handle is broken off in shaft. Usually this is because someone didnt realize that screw is left hand thread!
Rack Pinion assy from the apron of a South Bend 14-1/2" lathe. Note the extra hole from where the taper pin was drilled out previously. Should be fine to use though Apron rack pinon gear assy from a South Bend 13" lathe.
Apron pair of worn out 1/2 nut castings from a South Bend 16" lathe. Threads are worn out. Castings only for anyone who wants to try and rebuild them
Apron shifter lever assy with idler gear from a South Bend 16" lathe.
South bend 9in lathe feet These feet are in good condition These feet can be used for other purposes besides feet for a lathe
South bend 9in lathe. Top half of apron Appears to be in good condition
South bend 9in lathe head stock Appears to be in good condition
10 TOOL BITS 1/2" 1 IS MARKED DOALL-7 1 IS MARKED ARMSTRONG HIGH SPEED 2381 1 IS MARKED HS MO-MAX COBALT CLEVELAND TWIST DRILL CO. 2 IS MARKED REX AAA IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. ... morePLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
8 inch diameter face plate. 2-1/4" 8 thread. Registration bore measures aprox. 2.256" Height is aprox. 1-3/4" overall. Heavy duty. Very good condition. No dings or crashes. Minor surface rust. I do not know the manufacture. There are 4 stamped marks(seen in detail photo) that look like 00 and 11. This is a nicely cast. Rugged face plate. Please ask questions before bidding. Payment(in full) is due within 3 business days of end of auction. I will gladly combine items for shipping. Thank You for looking. Check out my!
Vintage South Bend Lathe Publication Vintage SOUTH BEND LATHE Book. Interesting Installations of South Bend Lathes" 24 pages featuring pictures of lathes in different uses around the world Piece in VG condition. No marks. Writing, rips, wrinkles. Crisp and clean. Please feel free to ask any questions. Local pickup available. ref km3077-bb7. Paypal accepted. Payment upon local pickup also available. Items will be shipped out the same or next business day after payment is received. Worldwide shipping available. If you purchase multiple items. I will combine shipping. Saving American History scours the country to find vintage rarities and antique oddities. Our goal is to find rare items and bring them to a marketplace where they can be appreciated and cherished by people of the present and future. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-147cdef70ab-0x110-
Lead screw support bushing/bracket. Holds right side of screw. From a South Bend 14.5" lathe
This auction is for a used Logan or South Bend 10" follower rest. Fits the light 10" or"10k" South Bend lathes and possibly the heavy 10" But I think it may be a Logan since it doesn't have any part numbers on it. Either way it should fit both lathes since they are almost identical. It's in very good condition and all the parts move freely. No excessive wear or damage. Shipping will be $10.75 sent Priority mail in the US only. Thanks for looking.
This auction is South Bend 9 Lathe Followrest Follow Rest. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
Nice MT3 to MT2 Spindle Sleeve and Dead Center for Atlas. Craftsman or South Bend metal lathe. Dead Center measures approximately 4" long. If you plan on purchasing multiple items I would be glad to combine shipping. PLease do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Ellis dividing head with tail stock and 1 plate. Dirty but in good condition with very little backlash.shipping will be less if your closer to me.Shipping quoted for west coast
Ebay Base This auction is for Primeline dial indicator gage. This dial measures 1" travel with.001" precision. It is in very excellent. Fully functional condition with silky smooth action. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
This wrench is in p excellent condition. It has normal patina and is in perfect functional condition. The Real Thing.
South bend 9in lathe bed in good condition
Lead screw drive for south bend 9in lathe It is in good condition and looks in working order
REWOUND 220 3 PHASE MOTOR.ACCESSORIES.COLLETS& FACE PLATES
South Bend 16" x 60" Engine Lathe with gap bed Model PA13917VS2 s/n 225CH 7.5 HP Motor 480V Speeds from 20-400 low range and 400-2500 in high range. Infinitely variable Equipped with: 10" 3 jaw chuck 12" 4 jaw chucks Chuck guard Live center Quick change tooling Taper attachment New price today would be over $25.000! FREE SHIPPING ORDERS? QUESTIONS? CALL US 866-532-2962 This item is subject to prior sale. We reserve the right to end an auction early. Return privilege: We offer an exclusive 30 day return privilege. If you are not satisfied with your purchase. Simply send the item back in its original condition for a full refund. We are not responsible for third party charges, such as: rigging, shipping, installation, and service work. Shipping/Freight Shipping is on us with"Buy it Now. Residential delivery and liftgate ... moreare additional charges. Item may be picked up and loaded at our Phoenix location at no charge. Local delivery is available. You are welcome and encouraged to check out this machine under power at our Phoenix facility. Please contact us for an appointment.
Very cool double open early 1900's lathe tool holder/ tool post wrench made by J.H. Williams of Brooklyn after the Whitman and Barnes buyout circa 1920. Rare to find these S shaped lathe Wrenches as they are beautifully made and a great addition to anyones lathe tooling. This particular wrench is a 5/16 by 3/8 which is one of the most useful combinations and is pictured on a later Williams Boring bar holder that has a 5/16" top nut and is currently available on a buy it now in another listing. Great old lathe wrench and very easy to tell apart from the others!
The following part came from a vintage SOUTH BEND 13" LATHE. This was the early version with the single-arm quick-change gearbox. The lathe was in great very low mileage condition before it was taken apart and was not parted out due to wear at all. Please see the description below for details. This auction is for the bed clamp that supports the main gear cover. It can also be used for custom accessories like a lamp etc. It's in great shape with no damage. FREE Priority Mail shipping is included in the price so get this while I've got it! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-147da017265-0x10b-
11-HSS Lathe Blanks- Cyclops B-6" Brand-Assorted sizes Details: 1-Lot of 11 bits. All bits have been slightly ground one side, perhaps to test hardness? see pics) otherwise bits are new SIZES: 2- 3/16" blanks 3- 1/4" blanks 2- 5/16" blanks 4- 3/8" blanks FOREIGN BUYERS ASK FOR SHIPPING QUOTE A little about Us: Machine Shack. Is a new company dedicated to finding and delivering High Quality Machines and Tooling. Although this User ID is new we have been selling for years on eBay. Always with positive feedback. Rest assured that our commitment to your satisfaction is our number one priority We take pride in offering quality products. We spare no expense in making sure that your item is packaged like one of us just bought it. NOTHING is worse than buying something from someone on eBay who does not care We Care and We ... morelook forward to doing business with you soon! Thanks! PLEASE SEE OUR OTHER AUCTIONS FOR MORE! Illinois residents please be advised that we must add sales tax of 9 percent to you winning bid total g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-147da04c3e2-0x10c-
SOUTH BEND HEAVY 10" METAL LATHE TROUGH The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-147da08b037-0x10a-
SOUTH BEND FOLLOWER APROX 9.5 INCH HIGH. LOOKS LIKE NEW COMPLETE AND IN EXCELLENT WORKING ORDER WITH NO CRACKS NOR DAMAGES. PAYPAL ONLY. ARE SALES ARE FINAL, REGISTERED SHIPPING TO USA FROM MEXICO 50 USD SIGNED FOR BY CAREFULLY PACKED. THANKS FOR LOOKING MY AUCTION
This is a really nice SCA 4 jaw independent lathe chuck. It as"marked made in Sweden" and"steel" As you can see the reversible top jaws are in good shape. Mount is L-1 long taper. The thru hole is 2-15/16" It has a few dings here and there and a little patina but is still a nice chuck. I took all jaws out and cleaned and inspected everything. The jaws and mounting surface are in great shape. I do not have key for this chuck. This chuck would cost over $3000 to buy new. See my other items for more chucks and tooling. I have a dozen or so chucks to be listed between 8" and 18" So if you need something, let me know. I have this listed as local pickup because it weighs 142 lb and i do not think I will be able to keep it under 150 for UPS. I will however band it to a pallet and drop it off at a local freight ... moreterminal for someone who wishes to arrange shipping through a carrier. I will be happy to help the buyer arrange shipping on freight quote.com Posted with
Nice- Lot of twenty(20) 3/8" metal cutting bits. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Please visit my eBay store for more great deals. This is a very nice South Bend Catalog from 1960. All pages intact and clear. No tears or stains. Great collectible. Please email any questions.
LOT OF 15 LATHE COLLETS 5C SOUTH BEND LOGAN HARDINGE Brand SBL/ Germany Packaging None Condition Very Good Quantity 15 63/64 61/64 59/64 57/64 53/64 51/64 47/64 45/64 39/64 37/64 29/64 25/64 15/64 1/4 5/64. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-147de5b764f-0x10a-
LOT OF 9 JET LATHE COLLETS 5C SOUTH BEND LOGAN HARDINGE Brand Jet Packaging None Condition Very Good Quantity 9 15/16 3/4 21/32 5/8 9/16 17/32 15/32 3/8 3/16. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LOT OF 19 LATHE COLLETS 5C SOUTH BEND LOGAN HARDINGE Brand Unknown Packaging None Condition Very Good Quantity 19 1/8 1/2 7/8 1 5/16 7/16 9/64 11/64 13/64 17/64 21/64 23/64 27/64 33/64 35/64 41/64 43/64 49/64 55/64. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
SOUTH BEND LATHE 113B(VINTAGE) 5' BED 13" SWING APPROXIMATELY 6' LONG This auction is for the item pictured/described above. Reported to be working when taken out of service from our local Technical College. I have not tested the unit and do not know how long it has been idle. Item was used to train college students and not in a commercial setting. I've sold many items for many years for the technical college and most buyers have been very pleased with their purchases. However. I do not test these items and therefore can offer no warranty. Please bid accordingly. Must be picked up in Racine, WI during normal business hours. Buyer must pick up item within 14 days and supply all manpower and equipment(if needed) to remove item. Buyer will need to contact our Racine technical college to arrange pick up. You will receive contact ... moreinformation after payment is received. We do not permit cash at pick up. Thanks.
Original Union 6" 3 Jaw Chuck for an Atlas. Craftsman or South Bend Metal Lathe. 1 1/2 X 8 TPI. Chuck is stamped"UNION MFG Co.TRADE MARK NEW BRITAIN CONN U.S.A, 6 IN. NO. U-770 MADE IN U.S.A. Chuck Diameter is 6" body Height is 2" and overall stands 3" tall. Jaws move freely throughout range. Comes with key. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-147e196a65e-0x10e-
For sale is a nice Lathe made by South Bend. It is a 10K Model A with a gap bed and horizontal drive. It has a 4.5 foot bed with 35" max between centers. It needs belts. It has a 4 jaw chuck included. and a tool post. There is a quick change gearbox with a very wide range of ratios. The original scraping marks are still visible on the carriage ways. The dials are large style for easy reading. It looks like it was used by a hobbyist. There is power feed for the carriage and the cross slide.
No.2 10P 55 to 134 teeth. Lots of meat left
JACOBS No.34 0-1/2" DRILL CHUCK W/ 2 MT ARBOR FOR LATHE ATLAS SOUTH BEND LOGAN. Very good condition and adjusts fine. Please let the pictures help with the description and condition and view my other auctions for more LATHE PARTS. Check my feedback. Satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
Selling an old and seemingly well-used Rohm live center with morse taper#3. The tip of the center shows obvious wear and tarnishing from age and use. Center turns easily but tip can be pulled and pushed a bit. Not sure if this end play can be removed through adjustment or if it matters once a load is placed on it. I used this center extensively several years ago on a large lathe without issue but want to mention it so you know exactly what you are buying. By feel. There is no discernible side-to-side or lateral play. Selling this AS-IS so examine pictures carefully. Research and ask questions before bidding. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-147e1abee38-0x11a-
PLEASE NOTE. EBAY'S SHIPPING HAS TO BE DOUBLED AS THIS WILL BE SENT IN 2 BOXES BY UPS GROUND OR CALL ME AS NOTED IN THE DESCRIPTION. EARLY OVERHEAD COUNTER SHAFT DRIVE for FLAT BELT LATHE. 9 INCH JUNIOR SOUTH BEND. THIS CAME BOLTED ON A 9 INCH JUNIOR SOUTH BEND LATHE. It runs smooth and quiet. Included is the plate and spacers that went onto the back of the lathe bed. The ball crank screw releases tension on the flat belt to change speeds or stop driving the lathe. in the last picture there is a 4 fingered part that the ball crank screw moves back and forth to change the tension. One of the fingers is missing. It still operates fine without it. You can drill and tap a bolt with a sleeve on it to replace it if wanted. 1/2 HP, 1725 RPM, 110/220 volts currently wired 110 volts and single phase. Just put a plug on the wire and it is ready ... moreto use. This drive can also be bolted to thew back of a lathe bench and used to power any flat belt lathe. I PROBABLY CAN GET YOU A BETTER SHIPPING PRICE than Ebay's shipping calculator by using a different shipper. BEFORE YOU BID GIVE ME A CALL with your zip code at 401-330-9303 thanks, Bill. Please let the pictures help with the description and condition and view my other auctions for more LATHE TOOLING AND PARTS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
South Bend cross slide/ compound rest. Pretty good shape for it's age come with everything shown in the pics. Could use a wipe down. Please look at all the pic's as they are part of the description. If you have any questions please ask! Winning bidder has 3 days after end of auction to pay other wise item will be relisted if more time is needed please message me. I only ship to the lower 48 states in the U.S.A. Thanks and happy bidding!
4 32P 26-34 teeth 0674 WD and No.5 32 DP 21-25 T D" + F.067
No. 2 16P 55 to 134 T
CAST IRON LEG SET PAIR MAY FIT INDUSTRIAL LATHES: LOGAN? SOUTH BEND? OTHERS? listed a second time at a lower starting price- bid now as i will not realist a third time or sell after auctions end outside of ebay! HEAVY DUTY CAST IRON CONSTRUCTION ALL ORIGINAL PAINT AND OXIDATION PATINA NO CRACKS.BREAKS, OR REPAIRS(SEE PICTURES) ORIGINAL BRASS EQUIPMENT NAME TAG STILL ATTACHED(SEE PICS) EXTRA HOLES DRILLED ON ONE LEG'S SIDE FOR PREVIOUSLY INSTALLED SHELF OR BRACKET(NOW REMOVED- NOT INCLUDED) SEE PICTURES) DETAILED PICTURES PROVIDED FROM EVERY ANGLE FOR A COMPLETE DESCRIPTION ALL MEASUREMENTS ARE APPROXIMATE EACH LEG WEIGHS APPROX. 60 LBS AND MEASURES APPROX 32 INCHES TALL AND 26" WIDE AT LEG BASE USE'AS-IS' FOR YOUR EQUIPMENT OR FOR AN UNIQUE STEAMPUNK PROJECT TABLE OR BASE PLEASE BE CERTAIN OF YOUR APPLICATION. FITMENT AND ... moreDIMENSIONS(MEASUREMENTS IN THIS AUCTION ARE APPROXIMATE) AS THERE WILL BE NO RETURNS ON THIS ITEM Check out my! PLEASE FEEL FREE TO ASK ANY AND ALL QUESTIONS BEFORE BIDDING I WILL ANSWER ALL. HAPPY BIDDING. KINETICKIDDIO. A NOTE ABOUT SHIPPING THIS ITEM!PLEASE READ) THIS ITEM IS HEAVY! IT WILL SHIP UPS GROUND. IT WEIGHS 136 POUNDS. GREAT CARE HAS BEEN TAKEN TO ASSURE IT WILL BE CAREFULLY PACKED USING TRIPLE WALL BOX AND PROFESSIONAL PACKING MATERIALS( 25 DOLLARS WORTH OF NEW PACKING PEANUTS PLUS ADDED FOAM AND INTERNAL PADDING ADDED) I WILL HAND TRUCK AND DELIVER IT PERSONALLY TO MY LOCAL UPS STORE FOR SHIPMENT. FOR THIS REASON A TWENTY DOLLAR($20) HANDLING FEE WILL BE ADDED TO THE AUCTION'S FINAL PRICE. PLEASE. SHOULD YOU FEEL THIS FEE IS UNREASONABLE- I URGE YOU NOT TO BID. I WORK VERY HARD TO SHIP SAFELY AND SECURELY USUALLY CHARGING NO ADDITIONAL FEES. HOWEVER THESE EXTREMELY LARGE AND HEAVY ITEMS I BOX AND SHIP(AS OPPOSED TO OFFERING A LOCAL PICKUP ONLY) REQUIRE A RATHER HERCULEAN EXTRA EFFORT. THANK YOU FOR READING. KINETICKIDDIO A NOTE ABOUT PRICING: YOU MAY NOTICE THAT THE STARTING PRICE OF THIS ITEM IS IN COMPARISON. MUCH LOWER THAN MY FELLOW SELLERS HERE ON EBAY. I
This is a well used Cushman 8" 3 jaw scroll chuck. It measures 8-1/4" od. Mount is L-00 long taper. The thru hole is 2" It has a few dings here and there and a little patina but is still a useable chuck. The chuck operates smoothly. I do not have key for this chuck. The first partial mounting thread is chipped as you can see. ButI do not think that would have much effect on the mounting of the chuck. I have a dozen or so chucks to be listed between 8" and 18" so if you need something, let me know. Posted with
SOUTH BEND HEAVY 10" METAL LATHE 5C COLLET DRAW BAR. ADAPTER, SPINDLE NOSE COVER, SPANNER WRENCH, COLLET RACK, 20 5C COLLETS(SOUTH BEND, BUCK, PRECISION, FORST BROS. The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions!
This is a good purchase if you want to save the labor of re-fitting the bearings. The collet closer and indicator are not included. But are shown only to indicate how the bearings were assessed. With the spindle at rest and a radial force of twenty pounds in each direction the deflections were as follows: X positive: 0004" X negative: 0003" Z) upward: 0012" Z) downward: 0003" End play 10 lbs.0001" There are no cracks or welds on the casting. The gear teeth are all good. Ancillary components are available for sale. Too. It's in very good condition. Insurance IS included in US shipments. Foreign bidders. Please arrange international shipping before you bid. You can get an estimate at http:ircalc.usps.gov/ I'm happy with Paypal if you get the funds from your bank or Paypal balance and not from a credit card. ... moreI'm also selling various supplies and CAE software originally purchased for a prototype machine shop I used to operate in San Francisco. Just ask if you would like me to set up an auction for any of it. Powered by The free listing tool. List your items fast and easy and manage your active items.
Came off a South Bend 9" model A. Was used as a wood lathe. Do it is in great shape for it's age very little if any play in the hinge pin. Please look at all the pic's as they are part of the description. If you have any questions please ask! Winning bidder has 3 days after end of auction to pay other wise item will be relisted if more time is needed please message me. I only ship to the lower 48 states in the U.S.A. Thanks and happy bidding!
1930 South Bend"How To Run a Lathe" Care and Operations Book(softcover) Original. Not a reproduction. 29th Edition, Copyright August 1930. Very good condition. Considering its 84 years old. some edge wear cover has some issues(see photo) First page has original owners name in ink, no other markings in book. 160 pages, 5-316" x 8" softcover.
South Bend 16 Inch QC Gear Lathe Parts Manual Lot includes one each of the following item: Parts Manual-P-116 You will recieve the actual manuals shown in the photo. Not copies. We ship immediately via USPS Priority Mail On Mar-11-13 at 20:29:04 PDT. Seller added the following information:
ORIG.SOUTH BEND LATHE 12- 3C COLLETS& CLOSER W/ SPINDLE CLOSER& PROTECTOR. The collets are 1/16" 3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 5/16' 3/8" 7/16" 29/64" and 1/2" 9 are Hardinge, 2 are sbl and 1 is unmarked. NICE CLEAN CONDITION, READY TO USE Please let the pictures help with the description and condition and view my other auctions for more LATHE PARTS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
SOUTH BEND HEAVY 10 METAL LATHE THREADING DIAL ASSEMBLY NOTE: BROKEN BRACKET The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
This is a nice sharp 1 1/2- 8 tap that is the same size thread as the headstock spindle on a South Bend 9 inch lathe. I have used it to clean up the threads of my chuck. Good thing to have with your South Bend tools.
MHC dial bore gage set(missing parts)Small mag base,another dial indicated base,8 letter punches,2 mitutoyo digital slides(unknown if they work and sold as is)starrett pin micrometers nice condition,tesa.0001 test indicator,mitutoyo indicator parts dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-147ea44ec93-0x10b-
9" JUNIOR SOUTH BEND LATHE APRON. CLEAN AND VERY GOOD CONDITION WITH VERY LITTLE WEAR AT ALL. Please let the pictures help with the description and condition and view my other auctions for more 9" JR. PARTS COMING UP. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
Ebay Base This auction is for a vintage brass grease injector got lathe or milling machine. This measures 5/8" diameter x 4-1/2" long. The injector has a screw actuated piston that can push the thickest grease with ease. The tool is in excellent fully functional condition. The name on the injector is KOKOMO KORKER. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can be proud of, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
SOUTH BEND FOLLOWING REST 10 INCH HEAVY. MARKED 120K1 AND FLR-100K. LOOKS LIKE NEW COMPLETE AND IN EXCELLENT WORKING ORDER WITH NO CRACKS NOR DAMAGES. PAYPAL ONLY. ARE SALES ARE FINAL, REGISTERED SHIPPING TO USA FROM MEXICO 60 USD SIGNED FOR BY CAREFULLY PACKED. THANKS FOR LOOKING MY AUCTION
CUTLER HAMMER DRUM SWITCH CONTROL NO. 5441H27A SIZE"0" The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
COMPLETE SOUTH BEND HEAVY 10 METAL LATHE SINGLE LEVER QUICK CHANGE GEAR BOX The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
MORSE TAPER 3 LIVE CENTER The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
1941 AD: South Bend Lathe Works 16" Turret Rapid Production Precision Accuracy This listing is for an original Magazine Print Advertisement Condition Graded: Near Fine. Ad measures approximately 11 x 13.75 inches. Shipped Flat i n Clear Archival Sleeve and Sturdy Cardboard Mailer Additional Prints. Ads or Articles, Same Package, FREE SHIPPING Included with your item is a Certificate of Provenance detailing its original source& date of publication. This small. Elegant certificate is suitable for attaching to the rear of your picture frame, to accompany your gift or to include in your collection. Archive or historical reference. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ All our Print Ads. Prints& Historical Articles are guaranteed original items rescued from period magazines, trade journals, books, catalogs etc. Never a photocopy ... moreor reproduction. ~~~~~~~~~~~~~~~~~~~~ Our vintage print ads are strictly graded for condition and are ideal for framing. Gifts, collecting, archiving and historical reference. 032-31
10 Change Gears Southbend 9" Lathe Gear South Bend 40 44 46 48 52 56 60 64 72 80. 64 tooth gear has a chip on one tooth as shown. Thanks for looking.
Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through email with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you Please see other listings for more. ITEM DETAILS: Mounts to headstock. Guards and allows a forward reverse switch to be mounted. Measures 3 3/4" x 2 3/8" ATTN: tooling auctions: Lathes may vary in models/years/etc; please ... morebe sure you are bidding on the correct item for your lathe. I do my best to get correct information to you. As always. Please check your measurements and identification marks before you bid. Powered by The free listing tool. List your items fast and easy and manage your active items.
Here is a nice pair of lathe Chuck Wrenches one is a T handle that I got from an old gunsmith and the other is a rare special order armstrong L handle chuck wrench. These were extra keys for an old 6" Bernerd& Pratt chuck that I sold and these somehow stayed behind. They are looking for a good new home!
South Bend Lathe 3C Draw Tube with Nose Piece Overall Tube length 13-7/16 inches Tube length to shoulder 10-1/2 inches. Tube OD.750 inches. Takes 3C collets. Inv.19751) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge ... morein addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
Item. Rocker arm for a large tool post Manufacturer. Unknown Size. 835" wide x.980" Overall height and 5" Long Condition. Very Nice used We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like ... morea shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile Rd. NW Grand Rapids. MI 616-791-9395
CRAFTSMAN BRAND 2 MT LATHE LIVE CENTER. ATLAS LOGAN SOUTH BEND LATHES. Tip is excellent and it turns smoothly and effortlessly. Please let the pictures help with the description and condition and view my other auctions for MORE LATHE TOOLING. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
CRAFTSMAN BRAND 2MT CROTCH CENTER. ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE. NICE CONDITION. 2" dia. face. Please let the pictures help with the description and condition and view my other auctions for more ATLAS LATHE PARTS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
Cushman Co South Bend lathe 3 jaw chuck with 6 extra jaws included. Will not ship internationally
Estate find. Most look to be South Bend, some in the original plastic boxes, all need some clean up from long storage, AS IS AS SHOWN. Pick up in Webster. NY no charge or see shipping calculator for shipping. Please see my other auctions. For steam punk; woodworking; blacksmith; tinsmith; machinists automotive, heavy duty mechanics tools for the mining, farming, trucking and logging industries. US shipping/handling $18.85. We will be liquidating a large estate consisting of military items. Woodworking tools, automotive tools, machinists tools, mechanics tools, collectibles, antique and primitives and more. Please put us in your favorites you will not be disappointed. Please note. Unless noted as new, the items I am auctioning are old and/or used. Because of this, they are sold AS IS, as found, the same as in any other auction. I will try ... moreto describe these items to the best of my ability and would not misrepresent anything intentionally. I list the defects, problems and imperfections I see on the items, but I can sometimes miss something or make a mistake. I will admit that I am not an expert on everything I sell so please look at the pictures for condition and e-mail me with any questions before bidding. I try to answer every question asked, but cannot guarantee an answer if you ask the day the auction ends. All items are sold AS IS AS SHOWN. NO REFUNDS AND NO RETURNS. INTERNATIONAL BUYERS PLEASE E-MAIL FOR SHIPPING COST BEFORE BIDDING. PLEASE CHECK WITH YOUR COUNTRIES SHIPPING RESTRICTIONS BEFORE YOU BID. WE WILL NOT BE RESPONSIBLE IF ITEMS CANNOT BE LEGALLY SHIPPED TO YOU. ALSO PLEASE DO NOT ASK US TO SHOW AS A GIFT OR MISREPRESENT THE CONTENTS OR VALUE. WE WILL NOT! Please see the shipping calculator. E-bay is now charging fees on the shipping also, I normally ship via USPS or UPS. We have a handling/packaging charge of $6.00 included in our shipping charges(this is not your total shipping, you must see the shipping calculator or flat rate shipping in the item description)Our $6.00 covers packaging materia
8" pratt 3 jaw chuck with reversible jaws. Jaws are in nice condition. Has L00 mount,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-147fd2aba97-0x10d-
This listing is for a 2-3 MT headstock sleeve. It is in great shape. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
This listing is for a lot of 6 calipers. Names include Starrett. Goodell-Pratt, and Moore& Wright. The smallest measures 3" tall and the largest 7" They are in great shape. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
ORIGINAL 9" JUNIOR SOUTH BEND LATHE REVERSE TUMBLER GEAR ASSEMBLY. REVERSER. W/ KEEPER BRACKET AND SCREWS. CLEAN AND VERY GOOD CONDITION WITH NOT A LOT OF WEAR. Please let the pictures help with the description and condition and view my other auctions for more 9" JR. PARTS COMING UP. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14801029076-0x106-
Genuine South Bend Micrometer Carriage Stop for 9" Lathe Model MCS-103NK 5/8" Wide V 3/8" Post w/ ~7/8" Travel No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following ... moreauction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Tra
9" JUNIOR SOUTH BEND LATHE COMPOUND REST. CLEAN AND VERY GOOD CONDITION. Please let the pictures help with the description and condition and view my other auctions for more 9" JR. PARTS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
An assortment of belts. 5/8" and 1/2" widths, Some new, Some used, What you see is what you get" Comes as shown.
Nice Lot of 5 4-Double Spiral End Mills And 1-Single Spiral End Mill for an Atlas. Craftsman or South Bend Metal Lathe. Double Spiral End Mills are 3/8" 9/32" 7/32 and 1/4" and the Single Spiral End Mill is 7/16" If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14804ddba3d-0x10d-
4' long bed- quick change gear box for power feed. Local pickup in Austin. TX area only. This is an oldie-but-a-goodie. I have used it for nearly 18 years until a got a newer. Bigger SBL. Power feeds and threading all work. Table on which it is mounted is included if wanted. Manual is a reproduction and comes with it. Tooling. Complete set of 3C collets 1/16-1/4 by 64ths(but missing 13/64) 1/4-1/2 by 32nds. Includes collet nose& closer. 4 jaw independent chuck. 3 jaw universal chuck- not very accurate. Tail stock drill chuck. Micrometer carriage stop. 2 face plates. Lathe dog. Milling attachment- not sure it's complete. several tailstock centers. Including 2 live ones. Quick change tailstock steady rest. Follower rest. Several tool holders. Several boring bars. 2 quick change tool posts. Necessary wrenches.
No. 4206 6" South Bend Lathe Works Chuck. Made in USA by Skinner Chuck Co. 6" 4 JAW INDEPENDENT CHUCK 2-1/4" 8 TPI
Nice four jaw chuck by Union Manufacturing in New Britain Connecticut. Early piece in great condition. From the estate of a local machinist
1938 south bend 9" lathe with 36" bed. This is a 9 wide and the parts are specific to wide only 9's. Lathe is complete but am parting it out. Let me know what parts you need and an offer and if we agree on a price. I'll make a custom listing for the item Thanks
It has the cutouts for under-drive. motor mounted underneath) These lathes typically develop a slight raised ridge close to the top of the vee. I measure the wear at its deepest point with a feeler gage and the straight edge backlit in the photo so you can see how isuch a test might look in your own facility. This bed has wear of.003" Which is not too bad. If your lathe carriage can't be adjusted so that it slides without play close to the headstock and isn't tight at the tailstock end of the bed, then this might be a cheap alternative to grinding. Serial number 153RKL7 It's in decent condition. Insurance IS included in US shipments. Foreign bidders. Please arrange international shipping before you bid. You can get an estimate at http:ircalc.usps.gov/ I'm happy with Paypal if you get the funds from your bank or Paypal ... morebalance and not from a credit card. I'm also selling various supplies and CAE software originally purchased for a prototype machine shop I used to operate in San Francisco. Just ask if you would like me to set up an auction for any of it. Powered by The free listing tool. List your items fast and easy and manage your active items.
Screw and quill threads are in excellent condition. Axial play(thrust) 009" Bore also excellent. Quill radial play.005" It's in excellent condition. Insurance IS included in US shipments. Foreign bidders. Please arrange international shipping before you bid. You can get an estimate at http:ircalc.usps.gov/ I'm happy with Paypal if you get the funds from your bank or Paypal balance and not from a credit card. I'm also selling various supplies and CAE software originally purchased for a prototype machine shop I used to operate in San Francisco. Just ask if you would like me to set up an auction for any of it. Powered by The free listing tool. List your items fast and easy and manage your active items.
South Bend milling attachment for heavy 10 lathe. Near new condition! Has 1-5/8” major diameter dovetail mount. Should fit 13” lathe as well Note. This attachment will not fit the 10K(light 10) lathe Features: Three wrenches. See photos for condition and application Engravings are crisp and clear Appears to have been used very little Shipping to US only
This listing is for a pair of 123 machinist blocks. They are in great shape. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
Three South Bend Lathe Books Lot includes one each of the following item: H-1-Keep Your Lathe Clean" H-2-Oiling The Lathe" H-3-The Installation and Leveling of the Lathe: Because of their age. We are calling the books used, however, the binding is in new condition. Book appears to have never been opened You will recieve the actual manuals shown in the photo. Not copies. We ship immediately via USPS Priority Mail On Mar-11-13 at 20:29:04 PDT. Seller added the following information:
MORSE 3 GOOD FOR ANY LATHE(DONT FORGET ABOUT) WE HAVE THE 14 DAY RETURN POLICY IF YOU ARE NOT HAPPY JUST RETURN THE ITEM WE WILL DO A FULL REFUND AND PAY ALL SHIPPING COST. NO HASSLE FREE RETURN POLICY ITS GREAT
Up for auction is a match sets of metal lathe chuck jaws These are in used condition. Do not know the manufacture. They have surface corrosion. They are stamped 55 and separately 1.2,3 to make a match set. Size is as follows 1.937 long. 1.472 high and.628 thick. See pictures for judging and ask questions if you need too.