In 
 
Order by: 
Available to: 
Price: 
 - 
$
19.99
Buy It Now
$4.99 Shipping
Condition: Used
Location: Lewisberry, United States
Look at ALL the photos red X bx.
$
100.00
Buy It Now
$25.16 Shipping
Condition: Used
Location: Paramus, United States
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of ... moreour repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ good condition handwheel dismantled for safer shipping half nuts are good complete for tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
$
175.00
Buy It Now
$32.90 Shipping
Condition: Used
Location: Christiansburg, United States
1.5"-8 threading of the back plate.
$
2.47
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
South Bend Lathe Manual No. 57. this manual. Loaded with illustrations, instructions, photos, and diagrams. Works great on Your. Nothing flashy, just ... moreall the information you need to. Specifications: Fully Printable.
$
70.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
South Bend Heavy 10” L or 13” Metal Lathe Pot Step Collet Closer Nose Cone. FREE SHIPPING TO THE LOWER 48 UNITED STATES ONLY INTERNATIONAL SHIPPING AVAILABLE
$
6950.00
Buy It Now
Condition: Used
Location: Aurora, United States
ONE USED -16” x 60”cc SOUTHBEND Engine Lathe. 16” Swing Over Bedways. Spindle Speeds from 20 to 2500 RPM. 10” Swing Over Cross Slide. Thread Dial.
$
49.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! South Bend 1307 Lathe Operation. Maintenance, and Parts Manual Click for Our Complete Catalog ... moreManual Description: Number of Pages: 61 This is a reproduction. Not a photocopy, of an original South Bend Operation, Maintenance, and Parts Manual. This manual contains all the information listed below in the contents. This is a hard to find manual. Contents: SECTION 1 SAFETY INSTRUCTIONS. 1. SECTION 2 PREPARATION FOR USE. 2.3. LOCATION. 2. UNCRATING. 2. INITIAL CLEANING. 3. INITIAL LUBRICATION. 3. ANCHOR BOLTING. 3. LIFTING LATHE. 3. LEVELING. 3. SECTION 3 OPERATION. 4.5,6. SCOPE. 4. ELECTRICAL CONTROLS. 4. HEADSTOCK. GEAR BOX, APRON. 4. OIL LEVEL WINDOWS. 4. SELECTING SPINDLE SPEEDS. 4. THREAD& FEED SELECTION. 4. CARRIAGE. 5. ILLUSTRATIONS. 6. MAJOR COMPONENTS.
$
44.99
Buy It Now
$5.49 Shipping
Condition: Brand New
Location: Hatfield, United States
This manual covers your lathe in great detail. Electrical schematics, exploded parts views and corresponding parts lists, lubrication, operation, and ... moremuch more. Over 80 pages. This is a high quality copy of an original manual with crisp clear printing.
$
600.00
Buy It Now
$37.12 Shipping
Condition: Used
Location: Dekalb, United States
South Bend lathe 15" steady rest. 7 1/2” base to center. Base is 7” x 2 3/8" wide. Center of flat way to center of V way is 5 1/2”.
$
49.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Este manual cubre los tornos South Bend fabricados en los años treinta y cincuenta. Mis manuales no son fotocopias. Mantengo un alto nivel de calidad ... moreen mis reproducciones. Caja de engranajes para el corte del hilo.
$
32.99
Buy It Now
$6.95 Shipping
Condition: Used
Location: Berlin, United States
This is a nice book. There are a few condition issues on the cover but the book is solid otherwise. I've uploaded a lot of pictures to give you the ... moremost accurate description I can. Volume one Volume 1(this edition) contains everything found in the the Volume 42 Edition Write with questions
$
69.90
Buy It Now
$9.99 Shipping
Condition: Used
Location: Minneapolis, United States
We are showing the inner I.D. of the flange bore as 4.750" and. 400" depth" d. The 6.185" main Plate is 0.590 Thick. The inner 4 bolt pattern is a 4-1/4".
$
40.00
Buy It Now
Free Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. YOU ARE BUYING ... moreA USED ITEM. I am not trying to rip anyone off or be deceptive.
$
4.97
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
1936 South Bend Lathe Manual No. 2A -. Manual is on CD. Loaded with illustrations, instructions, photos, and diagrams. Format on CD. 12 Pages -.
$
13.00
Buy It Now
Free Shipping
Condition: Used
Location: Elmer, United States
South Bend Lathe Works. South Bend, Indiana.
$
4.00
Buy It Now
$4.00 Shipping
Condition: Used
Location: Revere, United States
It is in very good condition. I am greatly appreciated!
$
3.99
Buy It Now
$1.25 Shipping
Condition: Used
Location: United States
VINTAGE 1906-1957 SOUTH BEND LATHE WORKS matchbook cover. Excellent condition. No matches inside. Striker has been used. See the pictures for condition ... moreand size. SHIPPING VIA USPS FIRST CLASS MAIL IN A PLASTIC COVER FURTHER PROTECTED WITH A HEAVY PAPER SLEEVE. FREE SHIPPING REGARDLESS OF HOW MANY YOU BUY! Starting to list a large collection of vintage matchbook covers. Please add me to your watched sellers. I am not a matchbook collector. If you have questions about any cover please ask. I will do my very best to get he information you want. Please take the time to look at all of my items for sale.
$
184.90
Buy It Now
Condition: New
Location: Saint Charles, United States
For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
16.99
Buy It Now
$3.85 Shipping
Condition: Used
Location: Nashville, United States
As shown, good threads & keyway.
$
21.86
Buy It Now
Free Shipping
Condition: New with tags
Location: El Paso, United States
This heavy cotton tee has the classic cotton look and feel. Casual elegance will make it an instant favorite in everyone's wardrobe. Unisex Heavy Cotton ... moreTee. Length, in 28.51 29.49 30.52 31.5 32.52 33.51 34.49 35.52.
$
79.99
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
South Bend Heavy 10” L or 13” Metal Lathe Pot Step Collet Closer Nose Cone. FREE SHIPPING TO THE LOWER 48 UNITED STATES ONLY INTERNATIONAL SHIPPING AVAILABLE
$
114.85
Buy It Now
$24.49 Shipping
Condition: New
Location: Saint Charles, United States
SHARS 4" 4 Jaw Self Centering Lathe Chucks w/ Cert. TIR + 1-1/2-8 Back Plate New. For back plate you would not need to drill any mounting holes but you ... morewill need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
4.98
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
South Bend Lathes Instruction Operators. Maintenance Manual Catalog 97 CD - 76 Pages. FORMAT: on CD on CD. this manual. Loaded with illustrations, instructions, ... morephotos, and diagrams. Works great on Your.
$
750.00
Buy It Now
$45.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. ding or mark ... moreon everything. If I can not then I must take pictures of everything.
$
2.97
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
1936 South Bend Lathe Manual No. 9 - How to. Manual is on CD. Loaded with illustrations, instructions, photos, and diagrams. Format on CD. Nothing flashy, ... morejust all the information you Need.
$
6.95
Buy It Now
$3.95 Shipping
Condition: Brand New
Location: Poughkeepsie, United States
Lindsay Publications, 2003. Reprint of the 1943 booklet. South Bend Lathe Works. Keep Your Lathe In Trim.
$
2.47
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
LATHES INSTRUCTION MANUAL. and quickly flip through the information finding what you need. No clunky paper manuals to keep up with. Works great on Your ... morephone, ipad, Lenovo. Loaded with illustrations, instructions, photos, and diagrams.
$
16.00
Buy It Now
Free Shipping
Condition: Used
Location: Middletown, United States
SIZE: 3/8" SQ X 11/16" Open End.
$
44.95
Buy It Now
$9.00 Shipping
Condition: New
Location: Fort Myers Beach, United States
Machinist quality drill chuck. Designed for drilling applications on portable bench, floor type drill presses, mills and lathes. 1 Morse Taper #1 (1MT) ... moreto JT33 arbor, precision ground, high grade tool steel.
$
52.99
Buy It Now
Free Shipping
Condition: New
Location: Lima, United States
There IS NO uncertainty of the position of the broached hole! It is placed exactly where it is supposed to be. “The inner yoke for convex turning did ... morenot fit within the outer yoke. The hard work is done for you!
$
300.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Chadds Ford, United States
Erickson 401AT Pneumatic Collet Chuck, 1.5”-8TPI Backplate adapter, fits Atlas and South Bend 10” lathes with this thread. Condition is Used. Comes With ... more8 collets
$
4.97
Buy It Now
$2.97 Shipping
Condition: Good
Location: New York, United States
18640 South Bend Lathe Operator. Instruction Maintenance Manual. Because of the GNU/GPL we are allowed to list this manual. You can zoom. Step By Step, ... moreEasy to follow instructions with Images. Nothing flashy, just all the information you need.
$
2.47
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
Used Copy of Repair parts for South Bend Lathe g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14b41a8a960-0x115-
$
35.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! South Bend 20" Gear Head Turn-nado Lathe Operator's Manual Click for Our Complete Catalog ... moreManual Description: Number of Pages: 24 This is a reproduction. Not a photocopy, of an original South Bend 20" Turn-nado Gear Head Lathe Operations and Maintenance Manual. This manual contains information on operating instructions, maintenance, adjustments and lubricating instructions. Please see index below. Index SECTION 1 DESCRIPTION INTRODUCTION.1 FUNCTIONAL DESCRIPTIONS.1 SECTION 2 PREPARATION FOR USE.2 LOCATION.2 UNCRATING.2 INITIAL CLEANING.3 INITIAL LUBRICATION.3 ANCHOR BOLTING.3 LIFTING LATHE.3 LEVELING.4 INITIAL STARTING.6 SECTION 3 OPERATION.7.10 SCOPE.7.10 USES OF CONTROLS AND INDICATORS.7.8,9 SECTION 4 LUBRICATION.10 LUBRICATION SYSTEMS.10 DAILY CARE OF THE LATHE.12 RECOMMENDED LUBRICANTS.10 SECTION 5 MAINTENANCE.13 INSPECTIONS AND ADJUSTMENTS.13.14 REPAIRS AND REPLACEMENTS.18 SECTION 6 OPERATIONAL CHECKS.19 SECTION 7 SHUTDOWN AND STORAGE.20 SECTION 8 SPECIFICATIONS.21 Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reprodu
$
32.99
Buy It Now
$8.65 Shipping
Condition: Used
Location: Nashville, United States
As shown, in very good used condition.
$
2.47
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
South Bend Lathe Manual No. 77-U. this manual. Loaded with illustrations, instructions, photos, and diagrams. Works great on Your. Specifications: Fully ... morePrintable.
$
2.47
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
South Bend Lathe Series 0 Manual No. 101. - Underneath Belt Motor Driven 1931. this manual. Zoom IN/OUT: YES. phone, ipad, Lenovo, Tablet, Microsoft Surface, ... moreMac, Mac Book or Computer. Loaded with illustrations, instructions, photos, and diagrams.
$
2.47
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
South Bend Lathe Manual No. 200. - Underneath Belt Motor Driven Series N 1931. this manual. Zoom IN/OUT: YES. Nothing flashy, just all the information ... moreyou need to. phone, ipad, Lenovo, Tablet, Microsoft Surface, Mac, Mac Book or Computer.
$
159.99
Buy It Now
Condition: New
Location: Saint Charles, United States
Certificate for each batch. LATHE SWING 6-12. 1/2" Retrofit GTN Cut-Off and Grooving Blades 202-9575. Lathe swing: 6" -12". Made of high quality Alloy ... moretool steel 40Gr which is forged and has longer life,not Aluminum.
$
9.99
Buy It Now
$5.25 Shipping
Condition: Used
Location: Waukegan, United States
Up for sale is a nice condition 2-1 morse taper reducer adaptor.
$
20.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
It gives a pictorial representation of the parts as was common in older manuals. It also gives the part numbers. It contains 20 pages. Pictorial Parts ... moreViews. South Bend Lathes Series O, N, R, & T. Series: O, N, R, & T.
$
2.47
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
South Bend Lathe Manual No. 5-A - How. Complete, comprehensive manual.Most complete and. You can zoom in on. Because of the GNU/GPL we are allowed to ... morelist this manual.This is either on. No clunky paper manuals to keep up with.
$
30.00
Buy It Now
$4.75 Shipping
Condition: Used
Location: Menifee, United States
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of ... moreour repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ No 253 3/8" Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
$
16.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
This is the fourth in a series of manuals put out by South Bend for their lathe owners. The manual has about29 pages. Spindle Take-up Nut. Type of Manual ... more: Instruction. About this manual : This is a high quality reproduction manual which has been scanned with a high resolution scanner.
$
9.99
Buy It Now
$9.85 Shipping
Condition: Used
Location: Waukegan, United States
Up for sale is a like new condition #2 morse taper dead center for a lathe. The point is sharp. Looks to have never been used.
$
69.99
Buy It Now
Free Shipping
Condition: Used
Location: Ivoryton, United States
MPN: AS60NK2. South Bend 9 or 10K Lathe Saddle Casting. Inventory # (5128). Saddle casting shows average wear on the V-grooves and dovetail. Fits SB 9" ... more& 10K Precision Lathes. Safety First! Always use the right part!
$
54.99
Buy It Now
$15.40 Shipping
Condition: New
Location: Baltimore, United States
Demolition Tool or Fish/Tire Thumper. This baton is exactly 13.6 oz. total weight. The tool is made from a kiln dried white ash on my 2014 - SOUTH BEND ... morelathe. Very strong thing, with excellent feel in your hand. Super strong wood with nice grain.
$
75.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK ITEM COMES EXACTLY AS SHOWN IN PICTURES LOOK AT CHART
$
11.98
Buy It Now
$5.30 Shipping
Condition: Used
Location: Roanoke, United States
Up for sale is a brochure put out by the South Bend Lathe Works featuring their line of 10" Precision Lathes dated 1946. Contains 8 pages.
$
125.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: Mahwah, United States
Excellent condition. Collet not included. I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am ... moreguessing 11 years or more now. ding or mark on everything.
$
25.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Lathe Practices Series. Lathe Operations. Why settle for anything less?. South Bend. I have collected this information for many years and have found the ... moreinformation they contain to be priceless in using and setting up the machines properly.
$
99.99
1d 6h 29m 58s
0 bids
$9.00 Shipping
Condition: Used
Location: Yorktown, United States
Condition is "Used".
$
7.99
Buy It Now
$4.00 Shipping
Condition: Used
Location: Keene, United States
Ialways attempt to take pictures that will show every detail.
$
25.00
Buy It Now
$3.99 Shipping
Condition: Used
Location: Hackettstown, United States
$
166.95
Buy It Now
Condition: New
Location: Saint Charles, United States
For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
250.00
Buy It Now
$20.00 Shipping
Condition: Used
Location: Hampstead, United States
Threaded back is stamped with SouthBend logo along with the numbers 1-7/8 8 as well as a number '10' marking.
$
133.00
Buy It Now
$10.00 Shipping
Condition: New
Location: Schaumburg, United States
Whole set includes: (Total 6PC ). 250-102 Boring, Turning and Facing Tool Holder, use tool bit up to 1/2" and round shank tool bit up to 7/16 ". 250-104 ... moreHeavy Duty Boring Bar Holder, can use both 5/8" and 3/4" shank boring bars.
$
4.97
Buy It Now
$2.97 Shipping
Condition: Seller refurbished
Location: New York, United States
South Bend Lathe Manual No. 50. this manual. Loaded with illustrations, instructions, photos, and diagrams. Works great on Your. Format on CD. phone, ... moreipad, Lenovo, Tablet, Microsoft Surface, Mac, Mac Book or Computer.
$
100.00
Buy It Now
$12.65 Shipping
Condition: New
Location: Baltimore, United States
Custom made Ice Pick that has been fitted with a brushed aluminum custom made sheath. The ice pick constitutes one piece (fixed blade) and the sheath. ... moreThe pick itself is 8.25" long. The ice pick is totally custom made on my SOUTH BEND lathe.
$
14.95
Buy It Now
$7.50 Shipping
Condition: Used
Location: Olmsted Falls, United States
Williams #587 drop~forged Lathe engineer's enclosed lathe wrench, square is 5/8".
 In 

Past Items  
 
Up for auction is a match sets of metal lathe chuck jaws These are in used condition. Do not know the manufacture. They have some surface corrosion. They have 55 stamped on them and then stamped separately 1.2,3 to make a match set. Size is as follows 1.896 long. 1.477 high and.627 thick. See pictures for judging and ask questions if you need too.
SOUTH BEND FOLLOWING REST 10 INCH MARKED 120K1 AND FLR-100K. LOOKS LIKE NEW COMPLETE AND IN EXCELLENT WORKING ORDER WITH NO CRACKS NOR DAMAGES EXCEPT FOR MINOR RUST. PAYPAL ONLY. ARE SALES ARE FINAL, REGISTERED SHIPPING TO USA FROM MEXICO 60 USD SIGNED FOR BY CAREFULLY PACKED. THANKS FOR LOOKING MY AUCTION THIS IS THE LAST ONE I HAVE THERES SOME TROUBLE HERE CAUSE SOME PEOPLE( INCLUDES MY FIRTS BUYER WHO IS VERY HAPPY WITH HIS ITEM SAID ITS A HEAVY AND OTHERS ITS A LIGHT.I DONT KNOW FOR SURE IF THIS IS A HEAVY OR A LIGHT 10" FOLLOWER, I PLACED ALL THE NUMBERS IN THE ITEM AND HOPE PEOPLE WHO LIKE TO BUY IT, KNOWS WHAT IS THIS FOR, AS I ALWAYS TOLD, ALL SALES ARE FINAL, ONLY PAYPAL AND YOU WILL GET EXACTLY AS AS IN THE PICTURES, AND BELIVE ME, I HAD 3 OF THEM AND THIS ONE ITS MY LAST ONE. THANK YOU VERY MUCH, NORMA GARCIA.
Twist lock type plugs for wiring lathes. Mill, other machine motors, Comes as shown.
Ebay Base This auction is for a mix of 11 Carbide& cobalt alloy HSS lathe cutter bits in 3/4" shank. These are Mo-Max from Cleveland Twist Drill. Dynacut by Latrobe Steel. RexAAA by Crucible. The carbide bits are Made by Kennametal and Carboloy. ost are sharp and ready to use. Some need dressing before use. 2 bits are tungsten carbide tipped and 9 bits are Cobalt& HSS. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction ... moreand save huge on shipping
Lead screw drive for south bend 9in lathe. 45" in length, It is in good condition and looks in working order
Ebay Base This auction is for a Sandvik Coromant T-Max part cut off insert holder tool. This is for parts or repair. The insert has a chip in it. This has 1-15/64" shank x 3/32" thick Made in USA is our primary focus. Only the best of the best tools. That a Machinist can proud of, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
This auction is for a South Bend Heavy Lathe.Sorry.I'm a lousy photographer,it's nicer than it looks in the pic,but it could use a good power washing.6.5 inch swing over the bed,will turn a 13" object.220 volt 3 phase motor,comes with a 220 volt single phase converter.Has the extra gear& chart so you can also do Metric threads. Has some tooling.And a 3 point stationary rest.Has a chuck for the tailstock,and the wrenches for the tailstock& the bed locking screw.Has a quick release tool head that holds 4 cutters.Chuck only has inside jaws,has chuck wrench,chuck has quick release collar so you can easily change over to collets.This is a really heavy duty lathe,I lost my shop,I'm sick that I have nowhere to put it.Located near Scranton,Pa,short distance delivery possible,ask first.
Some names are MoMax. Armstrong, ACT, Jessup Mogul, Morse, REX, Doall, Gorham, Kennemetal, Carboloy. All have been used and ground. Plenty of use left. Mixed 1/4. 5/16, 3/8 square. Left side are carbide tip. Right side are HSS Buyer pays 6.60 USPS shipping. I accept returns. I combine shipping. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1480cb9b05b-0xc6-
9" JUNIOR SOUTH BEND LATHE COMPOUND REST HOLD DOWN BOLTS + NUTS NICE CONDITION. Please let the pictures help with the description and condition and view my other auctions for more 9" JR. PARTS. Check my feedback. Satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1480cbab190-0x109-
SOUTH BEND HEAVY 10 METAL LATHE COMPLETE TAPER ATTACHMENT The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
WILLIAMS HOMCRAFT CUT-OFF TOOL HOLDER NO. N-20-RH 3/8" X 13/16" X 5" LONG ACCEPTS 9/16" BLADES The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
WILLIAMS LEFT TOOL HOLDER NO. 0-LH 23/64" X 13/16" X 5" LONG ACCEPTS 1/4" TOOL BITS The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
Excellent Import Straigh Tool Holder for Lathes 3/4 x 5/16" x 3" Shank. 3/16" tool capacity, 30 degree tool angle, includes new 3/16" HSS bit, no grinder scars on nose. No international. Ask any questions before bidding. Always happy to combine shipping when possible.
ORIGINAL 9" SOUTH BEND LATHE 80& 18 TOOTH IDLER GEAR. 3/4" BORE. Please let the pictures help with the description and condition and view my other auctions for more LATHE PARTS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
Barely used.
ARMSTRONG CO TURNING TOOL HOLDER MODEL No 2-L CHICAGO USA USE WITH 3/8" LATHE BIT USED IN EXCELLENT CONDITION PLEASE SEE ALL PICTURES FOR DETAILS Check out my! Be sure to add me to your! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1480cbdb5f3-0xf9-
7-3/8" DIAMETER LATHE FACE PLATE 1-1/2" X 8 TPI. ATLAS LOGAN SOUTH BEND LATHE. Please let the pictures help with the description and condition and view my other auctions for more ATLAS LATHE PARTS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
2- 2 MT LATHE DEAD CENTERS. 1 LONG, 1 STANDARD, ATLAS LOGAN SOUTH BEND LATHES. Both in good to very good condition. Please let the pictures help with the description and condition and view my other auctions for MORE LATHE TOOLING. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
ATLAS CRAFTSMAN SOUTH BEND LOGAN 2” LATHE CROTCH CENTER 1MT WITH 2MT ADAPTER CONDITION: Used/ See Photos/ Normal Wear and Tear Good Working Condition: Owner Markings: NO Will Combine Shipping– Request Invoice for final total Cleck Here to Check Out my Ebay Store All items are shipped USPS economy and same cost to all buyers. So please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. Typically the shipping charge will be less than the actual cost to ship. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used Should there be a shipping difference that money will be immediately refund. Please e-mail with questions
Original 6" Atlas Lathe Chuck 4 Jaw w/ Key South Bend Craftsman 1-1/2" 8 TPI Mount Off of an OLD ATLAS 10” F-Series Metal Lathe that I am parting out. I will have other parts listed In Very Good Condition works great with Key. Just Marked ATLAS on the front Face, also D9& K on the back side. 1-1/2” 8 TPI Thread Mount Check out my other items! SHIPPING– PLEASE NOTE My items Ship within 1- 3 Days of Payment Received Many of my Items are unique and require care in packaging. My goal is that you receive your item promptly and in one piece. INTERNATIONAL AND CANADIAN BIDDERS ARE WELCOMED NOTE– SOME COUNTRIES HAVE A SIZE LIMITATION OF 79” OF TOTAL GIRTH WHICH IS LENGTH PLUS THE TOTAL INCHES AROUND THE HEIGHT AND WIDTH. PLEASE CONTACT ME ON LARGER ITEMS BEFORE BIDDING TO MAKE SURE YOUR ITEM WILL BE ABLE TO BE SHIPPED TO YOU Money back ... moreGuarantee if not working or you are not 100% satisfied with this item as described( As Always Original shipping charges are only refunded for non working items. Your return shipping costs are not refundable) SHIPPING AND HANDLING- Use shipping calculator for costs
HARDINGE 3C 1/2" ROUND COLLET. SOUTH BEND, ATLAS, LOGAN LATHE. CLEAN AND NICE CONDITION. Please let the pictures help with the description and condition and view my other auctions for more SOUTH BEND LATHE PARTS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
LATHE CLAMP DOG. UP TO 2-1/4" SOUTH BEND ATLAS LOGAN, OLDER AMERICAN QUALITY, CAN'T FIND MAKER'S NAME. CLEAN AND GOOD CONDITION. Please let the pictures help with the description and condition and view my other auctions for 2 UNUSUAL READY TOOL Co. DOGS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
DUMORE Tool Post Grinder Diamond Wheel Dresser Attachment. Comes with WE. BLOCH CO Diamonds Tools.Los Angeles,CA For mounting on work piece in the Lathe to Dress the grinding wheel. It can be set to dressing EITHER Face or Side on the Wheel. Diam Cap 1 3/4" to 2 3/4" Check out my!
ORIGINAL ATLAS 6" DOG DRIVE FACEPLATE# 9-15 CRAFTSMAN SOUTH BEND METAL LATHE Off of an OLD ATLAS 10” F-Series Metal Lathe that I am parting out. I will have other parts listed In Very Good Condition. 1-1/2” 8 TPI Thread Mount Check out my other items! SHIPPING– PLEASE NOTE My items Ship within 1- 3 Days of Payment Received Many of my Items are unique and require care in packaging. My goal is that you receive your item promptly and in one piece. INTERNATIONAL AND CANADIAN BIDDERS ARE WELCOMED NOTE– SOME COUNTRIES HAVE A SIZE LIMITATION OF 79” OF TOTAL GIRTH WHICH IS LENGTH PLUS THE TOTAL INCHES AROUND THE HEIGHT AND WIDTH. PLEASE CONTACT ME ON LARGER ITEMS BEFORE BIDDING TO MAKE SURE YOUR ITEM WILL BE ABLE TO BE SHIPPED TO YOU Money back Guarantee if not working or you are not 100% satisfied with this item as described( As Always Original ... moreshipping charges are only refunded for non working items. Your return shipping costs are not refundable) SHIPPING AND HANDLING- Use shipping calculator for costs
The following part came from a vintage SOUTH BEND 13" LATHE. This was the early version with the single-arm quick-change gearbox. The lathe was in great very low mileage condition before it was taken apart and was not parted out due to wear at all. Please see the description below for details. This auction is for the main cast iron gear cover. It's in good shape but I noticed the start of a crack in one area(see pic) Get this while I've got it! THIS ITEM WEIGHS APPROX. 18 lbs WHEN PACKED
4" 3 Jaw Self Centering Lathe Chuck Atlas South Bend Craftsman 1-1/2" 8 TPI Came with an OLD ATLAS 10” F-Series Metal Lathe that I am parting out. I will have other parts listed In good Condition I could not find any manufacturers name on it. I do not have the chuck key- has square chuck key. Works well has 1-1/2” 8 TPI Thread Mount Check out my other items! SHIPPING– PLEASE NOTE My items Ship within 1- 3 Days of Payment Received Many of my Items are unique and require care in packaging. My goal is that you receive your item promptly and in one piece. INTERNATIONAL AND CANADIAN BIDDERS ARE WELCOMED NOTE– SOME COUNTRIES HAVE A SIZE LIMITATION OF 79” OF TOTAL GIRTH WHICH IS LENGTH PLUS THE TOTAL INCHES AROUND THE HEIGHT AND WIDTH. PLEASE CONTACT ME ON LARGER ITEMS BEFORE BIDDING TO MAKE SURE YOUR ITEM WILL BE ABLE TO BE SHIPPED TO ... moreYOU Money back Guarantee if not working or you are not 100% satisfied with this item as described( As Always Original shipping charges are only refunded for non working items. Your return shipping costs are not refundable) SHIPPING AND HANDLING- Use shipping calculator for costs
EMPIRE TOOL CO. Detroit. MI. Cutt-off tool holder with Four Blades. Three are Carbide-tipped. One is HSS. Shank.570" x.940" Check out my!
South Bend Steady Rest for 9" Lathe Model No. SRD-101N 3" Max Diameter 5/8" Round Fully Adjustable Brass Follow Shoes Base Measures 3-3/4" V is 1/2" Wide 3-5/16" From Center of V to Edge of Flat Base Casting No. PT118HT Upper Casting No. PT116NR1 Includes Original South Bend Shoe Plate 127464 No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We ... morecannot issue shipping refunds after payment has been made! To receive the combined rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
SB carriage lock in really good shape this lathe was only ever used as a wood lathe. Please look at all the pic's as they are part of the description. If you have any questions please ask! Winning bidder has 3 days after end of auction to pay other wise item will be relisted if more time is needed please message me. I only ship to the lower 48 states in the U.S.A. Thanks and happy bidding!
This auction is South Bend 9 Lathe Compond Toolrest. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
This auction is South Bend 9 Lathe Quick Change Gearbox Cover. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
This auction is South Bend 9 Lathe Gearbox Cover Hinge. PLEASE SEE OUR OTHER AUCTIONS* Buyer to pay shipping and insurance costs plus a handling fee of 50 cents if a padded envelope or new book box is used. We do not charge for most boxes or packaging materials as we attempt to find boxes that will do the trick and are usually successful. We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
for auction this used Collet closing draw bar. Overall length is 13 1/2' long outside edge to outside edge. The the back of the turn handle it is 12 3/4' long. From the shoulder of the handle to the threaded end it is 11 15/16' long. Then it has an adapter collar. With the adapter collar in place. The measurement is 10 3/4' long measuring from the top of the bevel. The outside diameter of the bar is 1 3/8' I believe the inside diameter is 1 3/16' It is really well made. But it has no marks that I can see. I purchased it at a recent estate where this was the only remnant that there was ever a late at the house. Please see pictures for condition. ask questions, any information will be appreciated. Buyer pays shipping and delivery confirmation usps parcel post mail. thanks for looking.
4 POSITION LATHE TOOL POST HARDINGE MONARCH SOUTH BEND LOGAN ETC. Brand Shop Made Packaging None Condition Very Good Quantity 1 3 1/2" Squared. 5/8" Max Bit. 3" x 2 3/16" Bottom Square. Could be adapted to fit most lathes. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1481438228a-0x111-
This auction is South Bend 9 Lathe 4' Bed w/ Feet& Rack for PICK-UP ONLY.Don't bid if you can't pick it up. I won't ship it. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
South Bend Lathe SBCE3458 Parts Manual 10" 13" 14.5" 16" 16/24" Lathes I believe this is a reproduction that we bought back in 2002 from LeBond LTD. Hubby sold the lathe but the manual is still here. Stains on cover. Tight no loose or missing pages. I only ship to US addresses I do my best to describe the items as I see them. If you have any question please ask them before you bid. I can't change your shipping address after payment is received. I can not cancel your purchases so please be sure to ask questions before you pay. Please note: the items I sell come from a variety of places. Estate sales, resale shops and tag sales. So this means the item/s have been preowned by someone besides me. There are no GUARANTEE the item/s come from a smoke or pet free home. Returns based on this reasons do not qualify as"not ... moreas described" Combine shipping is only given when all items are put in your cart and request shipping combination price. If items are bought and paid individually they will be shipped individually. This is ebay requirement that every single transaction have a unique tracking number. Free shipping items do not qualify for combine shipping discount. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14814917730-0xf8-
VINTAGE ARMSTRONG No.1 LATHE or GRINDER DOG. UP TO 7/8" UNUSUAL, SOUTH BEND. CLEAN AND GOOD CONDITION. Please let the pictures help with the description and condition and view my other auctions for A 2 UNUSUAL READY TOOL Co. DOGS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
VINTAGE READY TOOL Co. LATHE or GRINDER DOG. UP TO 2-1/2" UNUSUAL, SOUTH BEND. CLEAN AND GOOD CONDITION. Please let the pictures help with the description and condition and view my other auctions for A SMALLER READY DOG AND UNUSUAL ARMSTRONG DOG. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
SOUTH BEND 16 ENGINE LATHE: I've used this machine for many years. It's a champ. Nothing beats a belt driven spindle for thread cutting, you get really smooth threads with no'artifacts' from the drive gearing. Despite this machine's age it runs very quietly(with the lead screw disengaged you barely hear it running at all) Hand scraping marks are visible on the ways at the tail end, less so at the head end. There are no breaks and no repairs to the castings. This machine has not been abused but shows signs of normal wear. HISTORY AND USE: I've owned this machine for close to 25 years. It's never seen much production work being used mostly as a tool room lathe to make forming rollers and metal spinning mandrels. We've also used it plenty of times to support maintenance work in the shop and to develop parts for ... morespecial projects. The lathe is very stout and well built. Using good sharp tooling if you dial a.025" cut, you get an.025" cut in brass& alum and.0235" 025" in steel. There is some backlash in the cross slide. I don't find it objectionable but you may want to drop a fresh screw and nut in to eliminate it, these parts are readily available at reasonable cost from a number of sources. Thread cutting is a job on this lathe. Internal or external it just does a great job. If you are serious about tooling up this machine(or one like it) Check out our other auctions over the next month or so, there will be a number of lots of nice Aloris type tool holders, insert tools, tool post grinder, collets, chucks etc. I've never been able to find a serial number on this lathe. I've searched in all the places it might be to no avail. I've been told"that's impossible" by a number of sources which I see as normal because we're dealing with the'impossible' all the time, right? It hasn't been ground off, that would show up. so(I'm guessing here) I think this is a very late 50's machine just going by how it looks. It might
Welcome to retrofittocnc Inc. EBay Sales Listings. Today we are pleased to offer the following item for your consideration. You are welcome and encouraged to view items in person. We describe items to the best of our ability. We try to provide good pictures for your consideration. We are not an expert on all of our items so please ask questions before bidding or purchasing. WE WILL NOT EXCEPT PAYMENT FROM PAYPAL FOR OVER $1000.00. SORRY IF YOU DO WE WILL SEND YOUR MONEY BACK! Specifications are as the following: This item is in our Dallas Texas location STOCK#3577 MAKE: SOUTH BEND MDL: NORTIC 25 S/N: N315M19GT0282 SWING OVER BED WAYS: 25" SWING IN REMOVABLE GAP: 34" SWING OVER CROSS SLIDE: 15-3/4" DISTANCE BETWEEN CENTERS: 120" HOLE THRU SPINDLE: 2-3/4" SPINDLE NOSE CAMLOCK: D1-8 SPINDLE SPEED RANGE(18) 18- 1400 RPM ... moreLONGITUDINAL FEED RANGE(25) 0028" 045" CROSS FEED RANGE(25) 0014" 0225" INCH THREADING RANGE.5/128-64 TPI METRIC THREADING RANGE: 025-128MM TAILSTOCK SPINDLE TRAVEL: 7-7/8" TAILSTOCK SPINDLE TAPER: 5MT EQUIPPED WITH: TAILSTOCK. STEADY REST, CHUCKS*WAYS: GOOD APPROX WEIGHT: 9.500 LBS DIMENSIONS: 200"L. X 42"W, 59"H*SPECIFICATION SHOWN ARE TO BE USED AS A GUIDELINE ONLY. IT IS THE CUSTOMERS RESPONSIBILITY TO CHECK FOR SIZE AND FEATURES BEFORE PURCHASING. WE WILL NOT BE RESPONSIBLE FOR ERROR OR OMISSIONS. WE ARE ONLY SET UP TO LOAD ONTO FLAT BED TRUCKS* BUYERS PAYS ALL SHIPPING COSTS(In other words you are responsible for each shipment) Which are based on the item's size, weight and your location. We charge extra if an item needs to be put on a pallet. Out of the state purchasers shipping by common carrier are tax exempt. We collect all local taxes in CA@ 7.50% and in TX@ 8.25% unless they have the appropriate resale certificate. Goods shipping to California and Texas residents by common carrier will be charge the Correct tax for their local tax district. Any Questions? Please feel free to contact us BEFORE bidding by either email@rosa@
L0 lathe chuck back plate good used condition. Not sure of brand(buck? came off a 7-1/2 inch buck chuck,approx. hole patterns are 6-3/4 and 7-1/2 inch. numbered L-109.can be machined to fit your chuck. I am not an expert on this taper or plate,feel free to ask me questions,thank you. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1481a9c9779-0xf2-
Nice Original South Bend 9" Lathe Headstock Cap Screws. Part number 114X20. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Atlas 1/3 HP Motor With A 2 Step Pulley For A Metal Lathe Machinist.This is a Phase 1 motor with 110 volts. Unit is wired ready to have an on/ off switch added. Comes with original 2 step atlas pulley. Motor ran quite and cool upon testing. I have added insurance to the cost of shipping. For shipments in the US and Canada a $3.30 rate has been added. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Stenbek Lathe Live Center mt2 taper Craftsman Atlas South Bend Logan 9" 10" 12" in excellent working condition. This will be shipped USPS insured within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but please wait for me to invoice you before you pay since ebay charges 10% on shipping fees and I will be on the phone for hours with them getting them to combine the shipping for me which they dont like to do since they lose money.
RARE 1944 HOW TO RUN A LATHE SOUTH BEND LATHE WORKS ILLUSTRATED GOOD CONDITION 1944 HOW TO RUN A LATHE SOUTH BEND LATHE WORKS ILLUSTRATED 5 1/4 X 8" SOFT COVER FORMAT 128 PAGES HAS 100s OF PHOTOS CHARTS AND TABLES CONDITION VERY GOOD HAS COVER WEAR AND WRITING TITLE PAGE HAS RED INK STAMP LAST 5or6 PAGES HAVE SOME WATER DAMAGE AT BOTTOM STILL VERY USABLE CHECK THE PHOTOS FOR CONTENT AND CONDITION INCLUDES FREE US SHIPPING eBay policy! PAY PAL ONLY PLEASE REVIEW AND AGREE TO THE SHIPPING AND HANDLING QUOTED BEFORE BIDDING ON ANY AUCTION! We usually ship next business day. We use USPS and prefer priority mail with delivery conformation. Large heavy items may be shipped via Parcel Post. We will ship with the best option available. ALL AUCTIONS INCLUDE SHIPPING AND HANDLING COSTS! PLEASE REVIEW S&H BEFORE BIDDING. ANY ADJUSTMENTS TO ... moreS&H MUST BE MADE BEFORE YOU BID! Most of our auctions have an unconditional money back refund policy. Some items are sold as is which will be stated in the auction. If you have any questions? Please don't hesitate to email us. We will respond in a timely manner. We have an eclectic inventory from Auctions. Estates, and years of collecting. We scour the Earth to find good deals on unusual items and pass them on to our bidders. Check our feedback We think it speaks for itself! We prefer Email contacts through ebay.
Very nice lantern tool post! Does have metal staining from age. A nice T handle. Please look at all the pic's as they are part of the description. If you have any questions please ask! Winning bidder has 3 days after end of auction to pay other wise item will be relisted if more time is needed please message me. I only ship to the lower 48 states in the U.S.A. Thanks and happy bidding!
SPUR DRIVE CENTER EXCELLENT CONDITION IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ... moreONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
5" drive plate. 1" x 12 TIP.
Nice lathe dog. 1" interior diameter. 1 1/2" long leg. In fine order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Original South Bend combination tool post and carriage lock wrench for a 9" or 10K South Bend lathe. Stamped SOUTH BEND LATHE WORKS and 3/8 on one side and No. 253 on the other. Box and open end are both 3/8" Crack noted. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
ARMSTRONG 00K LATHE KNURLING TOOL. ATLAS 618, MK 2, CRAFTSMAN 101 SOUTH BEND. CLEAN AND VERY NICE CONDITION, 1/4" X 11/16" SHANK. Please let the pictures help with the description and condition and view my other auctions for MORE LATHE TOOLING. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
Great old vintage machine shop book called"How to Run a Lathe" by South Bend Lathe Works. 39th edition from 1940. Book is good condition with no damaged or missing pages, just some slight signs of use from the last 70 or so years. Also kind of has that old book smell.covers are fine with only slight wear.
This is a set of 5 MT2 HSS metal lathe dead centres. Removed from a 12" South Bend Lathe. Size and condition see picture.
Lead Screw Assembly w/ Support Bracket 36" Threaded Portion Overall Length 44-1/2" 3/4"8 Threads Per Inch Casting No. on Support Bracket SMT 5NK1 Parted From a 9" South Bend Precision Lathe Model A Catalog No. CL644A Includes All Parts Pictured No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping ... morerefunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
Bench Mount Rear Pulley Assembly Model HDD304N 10" 9" Motor Pulley Diameter 5" 4" 3" Diameter Flat Belt Pulleys Nominal Play in Shaft/Bushings Parted From a 9" South Bend Precision Lathe Model A Catalog No. CL644A Includes All Parts Pictured No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping ... morerefunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
Gear Cover w/ Switch Mounting Plate Parted From a 9" South Bend Precision Lathe Model A Catalog No. CL644A Includes All Parts Pictured No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay ... moreauction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14824947c52-0xf7-
Bull Gear Guard Parted From a 9" South Bend Precision Lathe Model A Catalog No. CL644A Includes All Parts Pictured No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. ... moreI f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14824947c06-0xeb-
Reversing Gear Bracet Assembly Main Casting No. 635K Parted From a 9" South Bend Precision Lathe Model A Catalog No. CL644A Includes All Parts Pictured No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by ... moreus- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
Banjo Casting w/ Guard& 80 Tooth Gear Parted From a 9" South Bend Precision Lathe Model A Catalog No. CL644A Includes All Parts Pictured No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT ... morepay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
Assorted Lot of Gears Gears Include: 40 Tooth. 2-1/4" w/ 9/16" Bore Pair of 32 Tooth. 3-1/4" w/ 9/16" Bore 36 Tooth. 2-1/16" Concave Gear w/ 7/8" Bore 80 Tooth. 4-1/2" w/ 5/8" Bore(NOTE: Repaired) All Parted From a 9" South Bend Precision Lathe Model A Catalog No. CL644A Includes All Parts Pictured No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased ... morewithin the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
Headstock Spindle Assembly 3C Internal Taper 1-1/2"8 Spindle Threads Parted From a 9" South Bend Precision Lathe Model A Catalog No. CL644A Includes All Parts Pictured No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait ... moreto be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14824947d28-0xed-
Thread Dial Gauge Main Casting No. 886NK2 Gear Diameter is 1-5/16" 32 Teeth Parted From a 9" South Bend Precision Lathe Model A Catalog No. CL644A Includes All Parts Pictured No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you ... moremust wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
Eccentric Shaft Assembly Includes Both Gears. Pin& Handle Parted From a 9" South Bend Precision Lathe Model A Catalog No. CL644A Includes All Parts Pictured No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced ... moreby us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
Up for bid here is a great vintage magazine advertisement for South Bend Lathe Works from 1944. In good condition. Page measures 6.5 inches by 9.5 inches. Great addition to any collection. Perfect for framing and displaying in any room. PM44 Who we are: We scour the countryside looking for cool vintage toys. Games, collectibles, electronics, etc. at flea markets, estate sales, auctions, garages, barns, attics, basements, closets, heck even under beds, to bring back into the world for your pleasure. Most of our items have been stowed away and forgotten about for many years and are just looking for a new, loving home. This could be you! Sales Terms and Conditions: Please read all item descriptions carefully and message us with any questions regarding this or any of my other listings. Listings are as accurate as possible and all items are just ... moreas described. Please place a bid only if you intend to purchase the item. All sales are final and no refunds will be provided. Payment Information: Payments are expected in a timely manner. Please be sure to pay for your item(s) within 2 days from the end of the auction. Failure to pay and/or message us regarding the auction item(s) within 2 days will result in an opening of a non-payment ticket with Ebay. If you have special circumstances and are unable to pay within the 2 day period simply send us a message and let us know what is going on. We are willing to work with you as long as you communicate with us. We accept Paypal for all purchases(must be a verified user with a confirmed address) Shipping and Handling: Delivery will be arranged within 2-7 business days after payment is confirmed. We typically ship parcel post(or media mail when applicable) If you prefer other methods contact us prior to payment to allow for proper shipping payment recalculations. We typically include a handling fee of $2.00- $5.00 to cover safe shipping/packing materials. Delivery confirmation, shipping insurance(if applicable/upon request) and Ebay seller fees. We do prefer to combine mult
Minty vintage. All 63 pages clean crisp. Beautiful illustrations. From lab to research to product to square footage required. Back has price list. Minimal shelf wear. No returns. Happy Hunting. Posted with
South Bend Model A 9" x 36" Metal Lathe Catalog 644R 4-1/2 Bed SN 181056 Equipped with. Taper Attachment Threading Dial South Bend 6" 3 Jaw Chuck(1-1/2" Through Hole) Tail Stock F/R Switch 3/4 HP 220/ 440 volt 3 Phase Motor Steel Cabinet Stand $300.00 Crating Fee For Common Carrier. Use Freight Calculator As A GUIDE Only! Local Pickup in Ellington. NY 14732 is FREE Check my other auctions for mor e quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: ... moreWe ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE South Bend Lathe 6" 4 jaw metal lathe chuck no back plate good condition No key This was acquired from a recently closed machine shop The ja ws move freely check all pics All sales final! Payment must be made within 3 days after the close of the auction. All non-paying bidders will be reported to ebay. Take a look at my other auctions to see if there is anything else that you might be interested in. Happy bidding!
FURNAS FOREWARD REVERSE LATHE DRUM SWITCH. ATLAS SOUTH BEND LOGAN, NO COVER. I think this is Furnas, operates fine except need a cover. Please let the pictures help with the description and condition and view my other auctions for MORE LATHE TOOLING. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14829dcefc9-0x114-
Nice Set of South Bend 3C Collets. Draw Bar, Nose Piece& Collar w/ Wooden Case Set Includes: Draw Bar Model No. HWC-103N Tube Measures 10-1/2" Length NOTE: Repairs to Draw Bar Nose Piece Measures.940" at Large End of Taper& 829" at Small End Over 1.675" Length 1-1/2"8 Threaded Collar South Bend 3C Collet Sizes Range: 1/16" to 15/32" Includes South Bend Wrench& Wooden Storage Case NOTE: Case Hinges Are Present. But Not Attached No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer ... moreBuy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
WILLIAMS VULCAN No. 62 LATHE CLAMP DOG. UP TO 1-5/8" SOUTH BEND ATLAS LOGAN. Please let the pictures help with the description and condition and view my other auctions for 2 UNUSUAL READY TOOL Co. DOGS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
Title says it all. Enjoy! 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-1482b6a9dc1-0x106-
For sale is a Williams Open End Wrench. This in very good useable condition. And very high quality. It is 11/16" This is a thin low profile wrench for getting into tight spots, it is only.2" thick. Some surface rust signs of use and age but useable. It is old. Therefore sold with no returns. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1482c22c1b5-0x109-
3 used tool bit holders. use 1/4 bit good working order 2 armstrong and 1 williams. 1 straight and 2 righthand check out my other machinist items.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1482c25be6c-0x118-
HERE ARE 3 PLASTIC LENS FOR THE TRAV A DIAL GAGES. 2 ARE NEW AND 1 HAS SOME MARKS ON THE SURFACE BUT IS STILL VERY USABLE.CHECK OUT MY OTHER TRAV A DIAL STUFF. I WILL COMBINE SHIPPING TO SAVE YOU SOME $.
THIS THE ACTUAL ITEM FOR BID A NICE PIECE OF MEMORABILIA OR FOR ACTUAL USE ALSO HAS MEASURMENTS ON THE REVERSE SIDE OF DECIMAL EQUIVALENTS IN 1/2-1/4- 1/8-1/16- 1/32- 1/64-INCREMENTS IT SAYS[SOUTH BEND LATHE WORKS SOUTH BEND 22. INDIANIA, U.S.A. IT IS FLEXABLE AND STRAIGHT
Jacobs#58B Metal Lathe Headstock Chuck w/ 1-1/2" x 8 TPI Thread for South Bend, Click to View Image Album Click to View Image Album Good used headstock chuck designed to mount on any lathe with a 1-1/2" x 8 threaded spindle. This includes South Bend lathes. Logans, Powermatic 90 wood lathes, Sheldons& many other smaller lathes. This chuck has not been made for many years so is available only here on eBay, when a seller is able to locate an example. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We ship via USPS. Cheapsest way,but prefer to ship via UPS as we have daily pickup which ... moreoffers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR, formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote
For sale is a tool holder for metal lathe. This is used to hold a carbide. I don't know what brand this is but it appears to be good quality. There is some surface rust and rust staining. But it does not appear to affect the use at all. Overall length: 8-1/2" Mounting Shank Size: 64" X.64"
For sale is a very large quick change tool holders as shown in the photo. This is made by Armstrong. P/N No. 8J-QC. It is made specifically for the threading tool as shown. This is very large, make sure you look at the photos with the ruler or ask for any other dimensions before you buy it to make sure it will work with your lathe. It is old. Therefore sold with no returns.
This auction is for a vintage instruction. Care, operation, and history, illustrated booklet for machinists, marked on the title page: HOW TO RUN A LATHE- THE CARE& OPERATION OF SCREW CUTTING LATHE- 39th EDITION- COPYRIGHT 1940- SOUTH BEND LATHE WORKS- SOUTH BEND, INDIANA, U.S.A. Please zoom in on all pictures including the CONTENTS pages for other details and complete subject matter. This old 128 page booklet is in very fine condition and appears barely used. The soft cover shows light storage wear and the interior is clean, tight, and well bound. It measures approx. 8" by 5" and weighs 6 oz. As always. No reserve, no buy it now and a very low starting price. No rules. Simply pay and I mail promptly. Satisfaction Guaranteed to be as described. Feel free to ask any questions or review my feedback. Check out my other 50 auctions ... morefor more hard to find vintage and antique collectibles. Check out my! Be sure to add me to your!
1938 South Bend How to Run a Lathe 34th Edition Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge South Bend Lathes How to Run A Lathe 34th Edition May 1938 The Care and Operation of A Screw-Cutting Lathe 128 pages Shipping cost below is for media mail unless first class is less. Please notify if you need quicker delivery. Payment is due within 7 days. Regardless of method of payment. I do combine shipping on articles purchased within a 7 day period. Shipping may be higher based upon final weight. At this time I am not shipping outside of the USA. If you are living outside of USA but have a shipping address in the USA. Please contact me after you try to bid and have been rejected. I can then choose to make an exception. I ship immediately upon receipt of payment. On next business day. Payment is due within 7 days. Regardless ... moreof payment method. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
1944 South Bend How to Run a Lathe Vol 1 Edn 43 Vintage Book Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge South Bend Lathes How to Run A Lathe Volume 1 Edition 43 The Care and Operation of A Screw-Cutting Lathe 1944 128 pages Shipping cost below is for media mail unless first class is less. Please notify if you need quicker delivery. Payment is due within 7 days. Regardless of method of payment. I do combine shipping on articles purchased within a 7 day period. Shipping may be higher based upon final weight. At this time I am not shipping outside of the USA. If you are living outside of USA but have a shipping address in the USA. Please contact me after you try to bid and have been rejected. I can then choose to make an exception. I ship immediately upon receipt of ... morepayment. On next business day. Payment is due within 7 days. Regardless of payment method. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14834167cf3-0x10f-
Lathe Thread Cutting Stop. Please check all pixs for more details. Check out my!
All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. International Bidders Please Inquire About Shipping Cost Prior To Bidding SOTTOF SALES Good used chuck backplate. Original South Bend part, 6.200" dia. 550" thick at the rim, 2 1/4" 8 threaded mount which will also fit some Logan Lathes, Sheldon Lathes and some import makes. D4492.6 EBAY AUCTION POLICIES: Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) ... moreis/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
BEAUTIFUL RUNNING CONDITION. MADE IN KOREA. LATE MODEL LATHE. THIS IS A SOUTH BEND TOOLROOM LATHE. 13" X 30" MODEL SBL 1308. SERIAL# 278095. FROM THE PRINTS IN THE MANUAL LOOKS TO BE A 1986. ITS GOT HARD WAYS-8" 3 JAW CHUCK-NEW 8" 4 JAW CHUCK-10" FACE PLATE-THREADING DIAL-MICROMETER CARRIAGE STOP-3/4" DRILL CHUCK- 3 MT LIVE CENTER-2 5-C DRAWBARS 1 PRODUCTION STYLE THAT NEEDS ADJUSTING AND 1 HAND WHEEL STYLE ALONG WITH THE NOSE PIECE-INCH& METRIC THREADING-D-1-4 CAMLOCK SPINDLE-ONE SHOT LUBE SYSTEM ON THE CARRIAGE-WORK LITE& CHUCK GUARD-OPERATORS MANUAL& PARTS LIST-1 1/2" SPINDLE HOLE-SPINDLE RPM 40-2500-INCH METRIC DIALS-3 HP WIRED 220 3 PHASE-FOOT BRAKE-8 1/4" SWING OVER THE CROSSLIDE-QUICK CHANGE TOOL POST WITH 5 BLOCKS. I RAN THIS LATHE AND ITS PERFECT. ITS BEEN REPAINTED(NOT ORIGIONAL ... morePAINT) THE OPERATORS MANUAL SAYS FOR PARTS AND SERVICE CALL LEBLOND LTD. BUYER PAYS SHIPPING OR COME PICK IT UP HERE. SKIDDING AND BOXING IS EXTRA. EMAIL WITH QUESTIONS. THANKS KENNY RUMFORD SUPPLY& MACHINERY COMPANY INC. 263 PINE STREET SEEKONK. MA. 02771 TEL 1-508-639-5199 SERVING THE MACHINE TOOL INDUSTRY FOR 55 YEARS
HERE IS A USED TRAV A DIAL USED FOR LATHES. MILLS OR ANYTHING THAT YOU WOULD LIKE TO USE IT ON. IT IS IN GOOD WORKING CONDITION AND MOVES FREELY. AS YOU CAN SEE IT IS COMPLETE WITH THE MOUNTING BASE AND THE ADJUSTER. CHECK OUT THE OTHER TRAV A DIAL STUFF THAT I HAVE OR WILL BE LISTING.I WILL NOT CLOSE MY SALES EARLY OR B.I.N. I WILL COMBINE SHIPPING TO SAVE YOU $.FREE SHIPPING IS IN THE LOWER 48 STATES ONLY. 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-14836654a19-0x10e-
This is from a 9" South Bend Lathe 1 1/2" x 8 thread in working condition.
This auction is for a lot of 8 used heavy lathe cutter bits with large shanks. Some are carbide tipped Shanks are: 1" by 7/16" 1" by 1/2" 15/16" by 1/2" 7/8" by 1/2" 7/8" by 3/8" Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures show same items from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
This is a headstock casting for a South Bend 9 in. lathe. the bearing surfaces need attention. I will ship it in a USPS flat rate box for $12.
Up for sale is this South Bend headstock guard bracket. This bracket is ready to use. Please take a look at my other auctions as I will be listing lots of other South Bend parts. I am parting out 2 late model heavy 10 lathes so if there is something specific you need please ask. If you have any questions feel free to email me. I will combine shipping and I will ship international so please ask. Thank you.
Up for sale is this South Bend Heavy 10. 10L upper gear cover. This cover includes both screws needed to mount. Please take a look at my other auctions as I will be listing lots of other South Bend parts. I am parting out 2 late model heavy 10 lathes so if there is something specific you need please ask. If you have any questions feel free to email me. I will combine shipping and I will ship international so please ask. Thank you.