In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
210.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Powerful Power: the High Power of 200w Allows the Air Cushion Machine to Quickly Preheat in 30 Seconds and Inflate at a Speed of up to 39 Feet per Minute, ... moreThus Effectively Increasing Work Efficiency.
$
183.35
Buy It Now
$20.00 Shipping
Condition: New
Location: Chino, United States
Air Cushion Machine: The is an easy-to-use air cushion machine for medium shipping volumes in order to safely pack the goods. The machine is robust, compact ... moreand therefore easy to transport in the warehouse and can be used flexibly. It is not only suitable for use in the warehouse, but also in the office or at home. The air cushion system is extremely powerful with a production speed of up to 8 m / min and a wide variety of sizes and shapes can be processed to produce air cushions and air mats. Features: Simple and intuitive operation Short warm-up time Speed ​​up to 8m / min Regulation of air air volume and temperature possible Low noise Easy maintenance Specification: Air cushion machine : Nominal power: 200W Input voltage: 110V Nominal frequency: 50Hz Air volume:.
$
161.47
Buy It Now
Free Shipping
Condition: New – Open box
Location: New York, United States
Capacity: 19L,5 Gal. Pot Material: aluminium. Suggest pearl capacity:1-4kg. Great Material: This machine is made of hard plastic and stainless steel, ... morethe inner surface has a non-stick coating, it is easy to cook pearls, durable and easy to clean;.
$
225.15
Buy It Now
$15.00 Shipping
Condition: New
Location: La Puente, United States
Product Parameters: Product Size: 860*510*240mm Burner Diameter: 400mm (15.75inch) Net Weight: 30kg (66.14lb) Voltage: 110v Rated Power: 3.4kw Material: ... moreStainless Steel Temperature: 50-300℃ Burners: 2 Product Features: The Burners Are Coated with Teflon, Which Is Easy to Clean The Stainless Steel Body Is Firm and Durable, and the Edges and Corners of the Machine Are Carefully Polished Without Hurting Hands Independent Temperature Control Knob, Which Can Freely Adjust the Required Temperature The Surrounding Heating Body Generates Heat Quickly and Evenly The Bottom Drawer Type Sundry Trough Can Handle the Residue in Time Scope of Application: Kitchen, Convenience Store, Snack Vendor, Dessert Shop Packing List: 1 * Stove + 1 * Rake + 1 * Sundry Trough.
$
28.99
Buy It Now
Free Shipping
Condition: New
Location: Naples, United States
WE ADHEAR TO BROTHERS POLICY.
$
210.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Powerful Power: the High Power of 200w Allows the Air Cushion Machine to Quickly Preheat in 30 Seconds and Inflate at a Speed of up to 39 Feet per Minute, ... moreThus Effectively Increasing Work Efficiency.
$
5.00
Buy It Now
$5.45 Shipping
Condition: New
Location: Norfolk, United States
Avery 11426 Index Maker Dividers White 5-Tab- Clear Label 5 1/2 x 8 1/2 Whether you're organizing a single project or creating multiple sets. Avery ... moreIndex Maker dividers give you a professional look. Clear labels virtually disappear on divider tabs to give your dividers a printed-on look. The Easy Apply label strip lets you label all tabs at once. Creating tabs labels for one or more divider sets is quick and easy using free Avery design tools and templates. Big Tab” Extra Wide” selections offer greater convenience in office-wide references; standard selections provide streamlined indexing in planners and personal binders. For laser and inkjet printers. Seven-hole punched for use with smaller binders and organizers. New in box. Payment is expected within 5 days from the end of the auction or the item will be re-listed and we will file for our fees back with ebay. Payment can be made by paypal. We will gladly combine shipping on multiple items that are won as long as they are paid with a single payment. Please feel free to email us with any questions. When you purchase from us your satisfaction is our number 1 priority. If you do not feel comfortable giving us a 5-star rating. Please contact us before you leave any feedback so that we can resolve any issues that you may have. Use the"Ask seller a question" link above and we will be more than happy to immediately assist you. Thank you for viewing my auctions! Be sure to add me to your favorites list Please check my Ebay for other great items.
$
14.90
Buy It Now
Free Shipping
Condition: New
Location: Kissimmee, United States
Universal Compatibility. This combo includes 10 pieces each of the following values We will be glad to assist you. 2 Pins, Ready for soldering. Five-Star ... moreService Is Our Goal! Locator: BB104-BG957-CL190.
$
215.99
Buy It Now
Free Shipping
Condition: New
Location: Flanders, United States
Enjoy free-standing, recessed or built-in application of the machine. A recessed installation will allow you to install the ice maker under a counter ... moreor in a kitchen cabinet if you have the required clearance space around the ice maker.
$
8.85
Buy It Now
Free Shipping
Condition: New
Location: Clawson, United States
Dynatex 49202 Low Volatile RTV Silicone Gasket Maker, 0 to 650 Degree F, 3 oz Carded Tube, Red.
$
23.80
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
· PARTING CUT OFF TOOL HOLDER SPARE PARTING HSS BLADE # Set of 2 Pcs. Skylark Tools comprises of a dedicated and skilled team of engineers with an aim ... moreof providing you tools of highest Indian industrial standards.
$
11.99
Buy It Now
Free Shipping
Condition: New
Location: United States
Width: 12mm(0.47"). Compatible with Brother P-touch printer Brother TZe / TZ label tapes compatibility. Color: White on Black. Model: Replace TZe-335,TZ-335. ... moreEasy to stick to any flat, smooth surface without falling off.
$
49.95
Buy It Now
$9.95 Shipping
Condition: New
Location: Winona, United States
ALUMICUT, Lubricant for working with ALUMINUM, BRASS, COPPER, & PLASTIC.
$
213.00
Buy It Now
Free Shipping
Condition: New
Location: La Puente, United States
Air Cushion Machine: The is an easy-to-use air cushion machine for medium shipping volumes in order to safely pack the goods. The machine is robust, compact ... moreand therefore easy to transport in the warehouse and can be used flexibly. It is not only suitable for use in the warehouse, but also in the office or at home. The air cushion system is extremely powerful with a production speed of up to 8 m / min and a wide variety of sizes and shapes of can be processed to produce air cushions and air mats. Features: Simple and intuitive operation Short warm-up time Speed ​​up to 8m / min Regulation of air air volume and temperature possible Low noise Easy maintenance Specification: Air cushion machine : Nominal power: 200W Input voltage: 110V Nominal frequency: 50Hz Air volume:.
$
210.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification Material: Stainless Steel, Abs, Carbide Steel Color: Gray, Green Process: Baking Paint Assembly Required: Yes Plug Standard: American Standard ... moreVoltage: Ac 110-220v Rated Power: 200w Inflation Speed: 12m/Min 39ft/Min Heat Seal Temperature: 160-220 Grade Gross Weight: 6.2kg/ 13.67 Lbs Net Weight: 5.8kg/ 12.79 Lbs Product Size: 40*14.5*29cm/ 15.7*5.7*11.4 in Package Size: 36*49.5*28cm/ 14.17*19.49*11.02in Package Included 1 * Air Cushion Machine 1 * Power Cord 4 * Hex Keys 1 * Discharge Shaft 1 * English Manual All Accessories for Installation.
$
252.00
Buy It Now
Free Shipping
Condition: New
Location: La Puente, United States
Specifications Product Name: Commercial Nonstick 110V Electric Ice Cream Corn Waffle Maker Iron Machine Item: No.NP-584 Machine Size: 86x51x24cm Mold ... morePlate: 40cm in dia. Machine Body Material: Stainless Steel Mold Plate: Cast Iron with Teflon Coated(non-stick surface) Voltage: 110V Power:6kw Baking Time: 2-5 mins for one tray(4pcs waffles).
$
183.35
Buy It Now
$20.00 Shipping
Condition: New
Location: Monroe Township, United States
Air Cushion Machine: The is an easy-to-use air cushion machine for medium shipping volumes in order to safely pack the goods. The machine is robust, compact ... moreand therefore easy to transport in the warehouse and can be used flexibly. It is not only suitable for use in the warehouse, but also in the office or at home. The air cushion system is extremely powerful with a production speed of up to 8 m / min and a wide variety of sizes and shapes of can be processed to produce air cushions and air mats. Features: Simple and intuitive operation Short warm-up time Speed ​​up to 8m / min Regulation of air air volume and temperature possible Low noise Easy maintenance Specification: Air cushion machine : Nominal power: 200W Input voltage: 110V Nominal frequency: 50Hz Air volume:.
$
128.50
Buy It Now
Free Shipping
Condition: New
Location: Orlando, United States
Filter Kit For 753 763 763 773 Skid Steer (All Fleetguard). Applications Filter Kit Maintenance 753 763 763 773 Skid Steer. Qty Filter. 1 Fuel Water Separator. ... moreDonaldson 6598362. 1 Air (Inner). Donaldson 6598492.
$
210.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification Material: Stainless Steel, Abs, Carbide Steel Color: Gray, Green Process: Baking Paint Assembly Required: Yes Plug Standard: American Standard ... moreVoltage: Ac 110-220v Rated Power: 200w Inflation Speed: 12m/Min 39ft/Min Heat Seal Temperature: 160-220 Grade Gross Weight: 6.2kg/ 13.67 Lbs Net Weight: 5.8kg/ 12.79 Lbs Product Size: 40*14.5*29cm/ 15.7*5.7*11.4 in Package Size: 36*49.5*28cm/ 14.17*19.49*11.02in Package Included 1 * Air Cushion Machine 1 * Power Cord 4 * Hex Keys 1 * Discharge Shaft 1 * English Manual All Accessories for Installation.
$
300.00
Buy It Now
$54.07 Shipping
Condition: Seller refurbished
Location: Heflin, United States
This Ice Maker Adapter Kit will fit the Cornelius ED175 8 Valve 25" Wide Soda Dispenser. The manual fill lid is Black.
$
9.95
Buy It Now
Free Shipping
Condition: New
Location: Houston, United States
$
14.49
Buy It Now
Free Shipping
Condition: New
Location: Snoqualmie, United States
This OCSParts 48 oz water pitcher is designed for use with coffee makers. It works great with either pour over models like Bunn models Velocity Brew, ... moreBX, BT, BTX and GR or coffee pod machines like Keurig machines.
$
13.06
Buy It Now
Free Shipping
Condition: New
Location: Sacramento, United States
Special backing is split down the middle to make separation of tape backing a snap for fast and easy label application. Product Type: Label Maker Tape. ... moreJed Pool Tools 80-225 Pool Pole & Hose Hangers.
$
130.00
Buy It Now
$10.50 Shipping
Condition: New
Location: Freeland, United States
The orginal Delta Unisaw plate. the Delta/Rockwell Unisaw plate. For this switch, you also have a choice between a gray or a red toggle color. These swtiches ... morehave similarly modified brackets to insure the correct fit in the Delta OEM swirtch box.
$
34.83
Buy It Now
$10.61 Shipping
Condition: New
Location: Wayland, United States
Over 250 different cutters for all your shaping needs. Cutters are furnished with either 1/2," 3/4" or 1-1/4" bore. Cutters with 3/4" bore include 2 reduction ... morebushings (1/2" x 3/4")which will reduce the bore to 1/2. ".
$
219.99
Buy It Now
$6.99 Shipping
Condition: New
Location: Greensboro, United States
YOU ARE LOOKING AT 1 BRAND NEW ROLL OF 300 GREEN SHIPPING LABELS WITH BLACK PRINTING TO FIT THE DYMO LABELWRITER 450. 450 TURBO, 450 TWIN TURBO AND 450 ... moreDUO. THE SIZE OF THE LABELS IS 2 5/16 X 4 INCHES(59mm x 101mm) I ONLY ACCEPT PAYPAL FOR ALL MY LISTINGS AND IMMEDIATE PAYMENT IS REQUIRED. THANKS FOR CHECKING OUT MY LISTING AND HAVE A LOOK AT THE REST OF THE COOL DECALS AND STUFF I HAVE UP FOR SALE. ADDING NEW THINGS ALL THE TIME!
$
39.99
Buy It Now
Free Shipping
Condition: New
Location: Clifton, United States
Print labels with up to two lines of text using the TZe laminated tape for indoor and outdoor use. P-touch Laminated Labels: The easy peel split backing ... moremakes it simple to apply, easily adhering to smooth, rough, flat or rounded surfaces.
$
14.15
Buy It Now
Free Shipping
Condition: New
Location: Clawson, United States
Permatex 25228 The Right Stuff 90 Minute Black Gasket Maker, 3 oz, 1 Count (Pack of 1).
$
15.99
Buy It Now
Free Shipping
Condition: New
Location: South El Monte, United States
✌️ Package Included: GREENCYCLE compatible for Brother P-touch TZe-241 TZ-241 AZe-241 laminated label maker tape. ✌️ Color: Black Print on White; Width: ... more18mm (0.7"), Length: 8m (26.2ft) each. ✌️ Achieve exceptional printing clarity and durability. ✌️ With strong adhesion but no sticky residue upon removal. ✌️ Perfectly compatible with Brother P-touch label printers ✌️ Easy-peeling with a split backing design. ✌️ Fade/water/grease/grime/abrasion/temperature resistant, anti-corrosion, anti-UV. Compatible with Brother PT label maker: PT2730, PT2730VP, PTD400, PTD400AD, PTD400VP, PTD450, PTD600, PTD600VP, PTH500LI, PT-P700, PTP750W, PT-E300, PT-E300VP, PT-E500, PT-E550W, PT-P900W, PT-P950NW, PT-1890SC, PT-1890C, PT-1830, PT1830C, PT1880C, PT-1880, PT-2430PC, PT-2300, PT-2310, MORE.
$
21.00
Buy It Now
$9.50 Shipping
Condition: New
Location: Brattleboro, United States
6-flute, 2" cutting length, 8" overall length. 4355" shank 6/12. MPN: 41916, custom ground by the maker to. 4950". with the item.
$
332.50
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Product description: ★PRP gel preparation machine is the best design product controlled by microprocessor. It can be widely used for sample storage and ... morereaction, PRP gel preparation, DNA amplification, electrophoresis pre-denaturation and serum coagulation. ★ Real-time temperature display, time countdown display, automatic fault detection and buzzer alarm function, temperature deviation calibration function, built-in over-temperature protection device. ★Convenient module replacement, easy to clean and disinfect, beautiful appearance, blue LCD display instant parameter information. ★Optional power-off automatic recovery function, auto-start operation function, improve working efficiency, intelligent algorithm, ensure the temperature control accuracy of ≤+03C in the whole process range.
$
259.67
Buy It Now
$70.33 Shipping
Condition: Gebraucht
Location: Germany
Bezugsprofil II. Gewicht 1,5kg. Restnutzungsbreite 10mm.
$
18.39
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Explore your artistic side and use the Organizer Xpress embossing labels to enhance your scrapbooks, photo albums, or DIY projects - maybe even your craft ... morecupboard or closet! Model: Compatible for Dymo Embossing Labels 3D Label Tape.
$
7.50
Buy It Now
Free Shipping
Condition: New
Location: Farmington, United States
Permatex Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker is a fast-curing, sensor safe, low odor, non-corrosive formula that retains high ... moreflexibility, and oil resistance properties through use of a patented adhesion system.
$
29.95
Buy It Now
Free Shipping
Condition: Used
Location: Rocklin, United States
In good working, used condition. Tested prior to removal from unit. If you are unsure this part works for your appliance, before purchasing, please message ... moreme your model number so that I can verify fit. Any issues after receiving, please message me first and I will take care of it.
$
7.97
Buy It Now
Free Shipping
Condition: New
Location: Clawson, United States
Loctite 2203452 - 518™ Gasket Maker / Flange Sealant - 6 ml tube. UPC's: 079340011663, 0793400116630, 30079340011664. Pack of 1.
$
39.99
Buy It Now
Free Shipping
Condition: New
Location: United States
Heavy Duty Manual Hand Crank Siren 120 db Output Frequency 600 with Stand Base. Paracord Bracelet Jig Kit with Paracord Needle Set Adjustable Length 4" ... moreto 13". YaeMarine Paracord Bracelet Jig Kit practical knotter tool Adjustable 4" to 13".
$
7.45
Buy It Now
Free Shipping
Condition: New
Location: Clawson, United States
Permatex 22072 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker, Sensor Safe And Non-Corrosive, For High Flex And Oil Resistant Applications ... more0.5 oz.
$
136.32
Buy It Now
$70.33 Shipping
Condition: Gebraucht
Location: Germany
Ø86x16xØ1 1/4". Gewicht 400g. Restnutzungsbreite 12mm.
$
49.83
Buy It Now
$6.00 Shipping
Condition: New
Location: Chino, United States
Description: Have you ever been attracted to the hot and delicious takoyaki balls in Japanese dramas? If the answer is yes, why not choose our electric ... moretakoyaki maker to make such delicious food by yourself? Our machine can make 28 fishballs at once, which is very time-saving and high efficiency. The surface of the machine has a food-grade non-stick coating, which is very easy to clean. Moreover, our machine is also very easy to operate, so you can use it with confidence. Application It is suitable for snack bars, breakfast stores, homes, shopping malls, supermarkets, cold drinks shops, etc. Weights&Dimensions: Machine size: 45.5*25.5*16cm/ 17.9*10*6.3inch Package Size: 54.5*33*26.5cm/21.5*13.0*10.4inch Hole Size: 4cm/1.6inch Net Weight: 4.3kg/9.5lbs Gross Weight: 4.85kg /10.7lbs .
$
45.99
Buy It Now
Free Shipping
Condition: New
Location: Miami, United States
With its compact design and easy-to-use QWERTY keyboard, labeling has never been easier. With wireless connectivity, you can print from anywhere in the ... moreroom. It is a versatile tool that will make your life easier.
$
8.49
Buy It Now
Free Shipping
Condition: New
Location: Walnut, United States
P-touch CUBE, Blue, P-touch CUBE, White, P-touch Embellish;. Tape Width : 12mm(1/2 in). The quality of products can always be kept in a good stability. ... moreCompatible for Printers Models Add to Favorite.
$
8.00
Buy It Now
Free Shipping
Condition: New
Location: Piedmont, United States
General Brand Ultra Round Planing Shaper 872 Fits 12" Hacksaw Handle
$
9.99
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
5PCS 45013 Label Tapes Compatible for Dymo D1 Label Maker 45013 S0720530 Black on White 12mm Label Ribbons Dymo LabelManager LabelPoint 100 150 160 210D ... more280 PC2 PnP LabelWriter 400 450 Duo Turbo. Model: DYMO 45013.
$
85.00
Buy It Now
Free Shipping
Condition: New
Location: Harrison Township, United States
BRAND NEW IN BOX SMALL CREASE IN RIBBON AT START BUT NOT ENOUGH TO AFFECT PERFORMANCE. PLEASE ASK ALL QUESTIONS BEFORE BIDDING PAYPAL ONLY. PAYMENT MUST ... moreBE RECEIVED WITHIN 24 HRS AFTER AUCTION CLOSES. THANKS AND HAPPY BIDDING! Posted with 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-143a251c372-0xf3-
$
74.99
Buy It Now
Free Shipping
Condition: New
Location: Oak Creek, United States
They are not cross referenced to any particular model number or serial number.
$
246.99
Buy It Now
Free Shipping
Condition: New
Location: Reno, United States
Great Northern Popcorn Commercial Shaved Ice Machine Ice Shaver Snow Cone Maker.
$
112.77
Buy It Now
Free Shipping
Condition: New
Location: Suwanee, United States
DYMO LABELMAKER,RHINO 4200,YL. Use with DYMO IND labels. Keyboard Type QWERTY. Orders outside the US are not protected by manufacturer warranty. Display ... moreType Other. User guide and one starter cassette.
$
8.98
Buy It Now
Free Shipping
Condition: New
Location: China
Model: Compatible for SS12KW LC-4WBN ST12KW SC12RW SFR12BK,SS9KW,SS18KW. King Jim:SR550C, SR530C, SR230C, SR230CH. Self adhesive label tape with an easy ... morepeel split back;. Economical and suitable for indoor use.
$
7.31
Buy It Now
Free Shipping
Condition: New
Location: China
Set Enema Anal Vaginal irrigator Douche Kit Colonic Irrigation Kit Cleanse Detox. Derma Hair Regrowth Micro Needle Roller Beard Growth Product Anti Hair ... moreLoss. -Capacity: 100ml. -With a 80cm length flexible clear plastic tubing.
$
89.95
Buy It Now
$10.95 Shipping
Condition: New
Location: United States
Untitled 1 DeWALT | Funtime Popcorn | DuroMax Generators | Garden Radiance | MicroLux Appliances | iRobot | Our Store Model RDB18SS-SG Condition New Factory ... moreSealed MSRP $59.99 Warranty 90 Day Commercial 18 Hot Dog Roller Protective Glass Guard Click an Image to Enlarge Features Removable protective guard is constructed of extra strength tempered glass Keeps food contamination free Specifications Protective Guard fits 18 Hot Dog Roller(RDB18SS) What’s in The Box Roller Dog Protective Guard Warranty 30 Day Satisfaction Guarantee Payment Shipping Warranty Feedback Contact Us PayPal Accepted. Immediate Payment Only. Your order will usually ship within 24-48 hours after payment has been received. For more information on FAO's 30 Day Satisfaction Guarantee. Please call 1.800.629.3325 for any questions. We charge 8.75% sales tax for all orders shipping within California. Tax exemption is available if we are provided with a valid California resale certificate. For our full store policies please Click Here. Domestic(Lower 48 States) $0.00 Canada: $40.00 2nd Day Air: $30.00 Australia: $70.00 Hawaii& Alaska: $30.00 Western Europe: $60.00 Local Pick Up Available: Yes Other International Destinations: $70.00 Orders are usually processed and shipped within 24 to 48 hours of receipt of your payment. Most orders are shipped by FedEx Ground. So please provide us with a physical shipping address(failing to do so may delay your order) We may ship an order by a different courier at our discretion(usually larger items require shipping by freight services, orders to military addresses must be shipped by USPS, etc. Average time of arrival is 5-7 days for domestic shipments by FedEx Ground, 7-10 days for domestic shipments by freight truck, and 6-10 business days for international shipments. If you need to receive an order within a guaranteed timeframe, please call us at 1.800.629.3325 for rush options and expedited shipping. International Buyers- Please Note: If shipping for your country is not listed. Call +1.909.568.280
$
162.00
Buy It Now
$8.55 Shipping
Condition: New
Location: Hillsboro, United States
Aluminum small wheel holder with steel bracket to make this a truly universal fit: will fit many different makes of tooling arms/2x72 belt grinders!
$
38.00
Buy It Now
$13.00 Shipping
Condition: New
Location: Faribault, United States
Designed by a tool maker and John Deere hobbyist. This tool is a must for every John Deere owner as described below. It is very effective. Inexpensive ... moreand can be used again and again. Thousands have been sold in the United States and abroad. Please check our eBay feedback. Float ride seat torsion spring tool set for John Deere 20 and 30 series tractors. Pair of tools rotate the left and right rubber torsion springs in position to easily attach the adjusting handle. Two 15/16" wrenches(not included) are used to provide the force. Tools are shown in position on the tractor part. Instructions and tips included. Will combine shipping on multiple items. Shipping to Canada- $21.00 All other countries- $25.00
$
3.95
Buy It Now
$3.95 Shipping
Condition: New
Location: United States
Variable Resistance: 5K Ohms. Manufacturer: Alpha. Very useful for getting correct levels out if you plan to do any recording of the output or sending ... moreto an amp/mixer. Single Turn.
$
675.00
6d 20h 59m 6s
0 bids
$900.00 Now
$69.97 Shipping
Condition: Used
Location: Vallejo, United States
Up for auction is this cute little work horse. It is a small little refrigerator that will keep your milk at an amazing cold temp. This one is practically ... morenew and works perfectly. It's quiet and is super convenience at your cafe or coffee bar. It has a digital LCD read out on the front of the machine It really doesn't mater what brand espresso machine you have. It will look terrific next to your machine. The machine comes with a power supply which plugs into the wall. The Fridge is clean and ready to use. This machine sells new for $899.00 to $1000.00. If you have questions. Feel free to call me and I will be happy to answer any questions. Call 315.797.2345 and ask for Howie. The photo here is a factory photo. I am not a pro photographer and I can not take a picture to save my life. Below is the factory description of this amazing little fridge. The La Cimbali Frigomilk preserves milk at a temperature lower than 41° F(5°C) Cooling system: electronic Peltier cells, milk temperature indicated by a digital thermometer, max. ambient temperature 90° F(32° C) Dimensions: Height: 12 in Width: 9 in Depth: 13 in Power: Voltage: 100/240 V Max. Power: 100 W Tank capacity: 3 L.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*72%3F7e%3D%3E-13ea01790a5-0xf8-
$
16.99
Buy It Now
Free Shipping
Condition: New
Location: Walnut, United States
Compatible model: Brother Label TapeTZe251TZ251. (4) Standard coating label, waterproof and oil-proof, scratch and abrasion resistance, durable, high ... moreand low temperature resistance;. Black on white. Compatible Printer.
$
13.99
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Model: Compatible for Dymo d1 45010/45013/45016/45017/45018/45019. 100% Compatible For Dymo Label Maker Application: Our label maker tape handles hundreds ... moreof tasks for perfect organization.
$
6.00
Buy It Now
$3.00 Shipping
Condition: New
Location: China
Got cold-start first-fix in less than a minute. connector: S5750-04-ND Antenna coaxial. We will reply you ASAP.
$
332.51
Buy It Now
Free Shipping
Condition: New
Location: La Puente, United States
Features: Voltage: 110v/60Hz Temperature range: room temperature + 5℃~100℃ Time range: 1min~99h59min/∞ Temperature accuracy: ≤±0.3℃ Display accuracy: ... more0.1℃ Temperature uniformity: ≤±0.3℃ Heating time: ≤12min (25℃ to 100℃) Multi-point running: yes (maximum 5 points) Multi-point loop operation: yes (max 99 times) Automatic heating: yes Automatic operation: yes Automatically resume operation: Yes Capacity: 12*5ml (syringe) Diameter: 13-13.5MM Power: 150 watts Fuse: 250V 3AФ5×20 Size: 26x19.5x15cm Packing size: 41*31*31cm Net weight: 2.5 kg Gross weight: 3.5kg The packaging includes: 1X TGel Heating machine.
$
548.96
Buy It Now
Free Shipping
Condition: New – Open box
Location: Bhavnagar Wadva S.O, India
Thermostat for temperature regulator. capillary tube: 3 m. set point range: 20.120°c bar. weight: 3.670 kg. [not included in price]. ident-nr.: 1010617. ... moreref.no: 46728.
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
 In 

Former Listings  
 
Pair of 3/8" Quarter Round Shaper Cutters
This auction is for a Pair of 3/8" Quarter Round Shaper Cutters. These cutters have been used by a professional woodworking shop and have been resharpened. The protective coating has been removed to shop carbide condition. This coating is also holding the pair of cutters together for shipping) There appears to be a good amount of carbide left on these cutters. Allowing for future sharpening. The arbor bore measures 20mm. In order to expedite shipping, payment through PayPal is appreciated within 24 hours of the end of this auction. Please contact me if you have any further questions. Thank you! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f9208bf81-0xff-
8" Logan Shaper Swivel Vise
8" Logan Shaper Swivel Vise This Swivel Vise for an 8" Logan Shaper is in very good condition. It has 5" wide jaws that are 1-5/8" deep and the vise opens to approximately 5" There are no cracks or tool marks. There are some chip impressions in the jaw inserts and on the bed of the vise near the fixed jaw which is typical for a used cast iron(not hardened) vise. I do not have a handle for the vise. I bought it to see if it could be adapted to a smaller 7" shaper that I have and decided to go another route. This will ship in a USPS Priority Mail Large Flat Rate Box with insurance.
8" MILLING MACHINE VISE mill drill press shaper work holder tool KURT USA D80-1
good used 8" mill vise with swivel base Kurt USA D80-1 if shipping there will be a $50 charge to pallet. Band and shrink wrap as needed for a shipping quote call Jack Becker at 1-800-323-5441 ext 1951 or JBECKER at freightquote. com. tell him approx 225lbs on a pallet 24" x 36" x 12" high from MILROY MACHINE or pickup in Milroy Indiana zipcode 46156 and i will load for free please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
ATLAS 7B METAL SHAPER CRANK GEAR ASSEMBLY ROLLER BEARINGS SHAFTS GEARS
DESCRIPTION: USED. CRANK GEAR ASSEMBLY FOR THE ATLAS 7B SHAPER. THE BEARINGS WILL NEED TO BE CLEANED AND GREAED. NO MISSING TEETH. PICTURE 6 SHOWS AN AREA THAT IS MISSING A SCREW. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING ... moreMY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECI
SY Industrial Grade Shaper Cutter C2041 - 3/4" bore
SY Industrial Grade Shaper Cutter Part#C2041- 3/4" bore in box- glue joint
Lot 1015 Fluted Case Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for nice fluted casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
Lot 1014 Stair Rail Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for delicate stair rail moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If ... moreyou buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13f967a32c1-0xfc-
shaper image cd shower companion, AM/FM Stereo, MP3 CD
shaper image cd shower companion. Very good condition. Normal 0 false false false EN-US JA X-NONE Ask before bidding. All sales final. See my other auctions. Payment due within 24 hrs end of auction. Far West add $1 shipping. Shipping includes handling fees.
Lot 1051 Beaded Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for beaded face frame or custom casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated ... morein listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
Lot 1049 Pilaster Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for custom casing or pilaster moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with Posted with eBay Mobile Posted with eBay Mobile Posted with eBay Mobile
Lot 1045 Stair Rail Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for large stair rail moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you ... morebuy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
Lot 1036 2 Pc Mantle Moulding /Weinig / Corrugated Knives Shaper Moulder
Moulder knives for huge 2 pc custom mantle moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
Lot 1034 Mantle Moulding /Weinig / Corrugated Knives Shaper Moulder
Moulder knives for custom mantle moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you ... morebuy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
Lot 1028 Chair Rail Moulding /Weinig / Corrugated Knives Shaper Moulder
Moulder knives for custom chair rail or panel moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with eBay Mobile Posted with Posted with f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f9876d545-0xfd-
Lot 1026 Case Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for fancy custom casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
SCMI MiniMax 3HP Sliding table Shaper
SCMI Mini Max Shaper 3 HP. Sliding Table, reversable, 3/4" spindle, very nice smooth running machine. I like the machine so much I upgraded to a much larger Shaper from the same manufacturer. You can do a lot of work with this machine.
VINTAGE ATLAS 7B METAL SHAPER FEED RATCHET HOUSINGS AND KNOB
DESCRIPTION: USED. FEED RATCHET GEAR HOUSINGS FOR THE ATLAS 7B SHAPER. NO CRACKS OR REPAIRS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING ... moreBIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I AL
VINTAGE ATLAS 7B METAL SHAPER POINTER AND SCALE FOR THE RAM
DESCRIPTION: USED. SCALE AND POINTER FOR THE ATLAS 7B SHAPER. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS
VTG 1944 SHAPER WORK , BEGINNERS IN MACHINE SHOP PRACTICE MANUAL
VINTAGE 1944 SUGGESTED UNIT COURSE IN SHAPER WORK. FOR BEGINNERS IN MACHINE SHOP PRACTICE. VOCATIONAL TRAINING FOR WAR PRODUCTION INDUSTRIES, PUBLISHED BY UNIVERSITY OF THE STATE OF NEW YORK STATE EDUCATION DEPARTMENT, BUREAU OF INDUSTRIAL AND TECHNICAL EDUCATION, THIS IS A SPIRAL BOUND SOFT COVER WITH 326 PAGES, TONS OF ILLUSTRATIONS. PLEASE EMAIL ME WITH ANY QUESTIONS
Excellent *ROCKWELL* 1- 1/2HP ~208Volt~ 3-phase *3450rpm* Sander Saw Shaper*
Great Condition ROCKWELL Motor 1- 1/2 HP 208 volt 3 phase Totally Sealed Three Lead Has some scratches in paint, but Works Great! Included with the motor is a Great Condition CUTLER-HAMMER 3-phase 2 HP switch also included with the motor, will be: 10' of good quality 14 gage 3 conductor wire, and the shaft keyway. Any questions, just ask. 14 Day Unconditional Return Policy. Thanks!
Shaper Rabbit Cutters
This auction is for one Pair of Straight Rabbit Shaper Cutters. These cutters have been used by a professional woodworking shop and have been resharpened. There appears to be a good amount of carbide left on these cutters. Allowing for future sharpening. The blade width of one cutter is 1" and the other cutter appears to be 1.062" The arbor bore measures 1.125" In order to expedite shipping, payment through PayPal is appreciated within 24 hours of the end of this auction. Please contact me if you have any further questions. Thank you!
SHOPSMITH SHAPER ADJUSIBLE FENCE CAN BE USED FOR ROUTER DRUM SANDER OPERATIONS
SHOPSMITH SHAPER ADJUSIBLE FENCE CAN BE USED FOR ROUTER& DRUM SANDER OPERATIONS Overall fence length is 25 3/4" +(adjustable) Good condition. Just been laying around the shop for a long time. The paint can be removed. Although it doesn't affect the operation of the fence. Email me with your city and state and I'll see if I can give you a better price on shipping. Make sure to click See Other Items when viewing my products.
ADC SS-100SL Sound Shaper-Spectrum Analyzer Stereo Frequency Equalizer
ADC SS-100SL Sound Shaper-Spectrum Analyzer Stereo Frequency Equalizer For auction is equalizer ADC SS-100SL in very good working and cosmetic condition. There are two scratches on the right side. The equalizer was tested and everything works properly.
1/4" Dado Shaper Cutter (1.125" bore)
This auction is for one used 1/4" Dado Shaper Cutter. The arbor bore measures 1.125" and the cutters measure 1/4 inch. There are some small chips in the carbide cutting tips. These small chips should be able to be removed during re-sharpening. In order to expedite shipping. Payment through PayPal is appreciated within 24 hours of the end of this auction. Please contact me if you have any further questions. Thank you!
1/4" Dado Shaper Cutter (40mm arbor bore)
This auction is for one 1/4" Dado Shaper Cutter. The arbor bore measures 40mm and the cutters measure 1/4 inch. In order to expedite shipping. Payment through PayPal is appreciated within 24 hours of the end of this auction. Please contact me if you have any further questions. Thank you!
2003 SCMI T130N LONGBED SHAPER W/ 4 ROLL POWER FEED /WATCH HD VIDEO DEMO
HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999_ 2003 SCMI T130N LONGBED SHAPER W/ 4 ROLL POWER FEED Hard to find SCMI T 130N LongBed shaper with 100″ tables and built in material support that extends out to 40″ in front of the fence. 1 1/4″ spindle with less than 1/1000″ run out. Numeric read out on both sides of the fence as well as on the spindle height. This extremely clean longbed is powered by a 230V/3 Phase 9hp motor. Multiple RPM spindle with 3.000, 4,500, 6,000, 7,000, and 10,000 RPM speeds. Spindle lock and foot brake are in perfect working order. Manuals, wrenches, a full set of spacers, and nut included. 4 roll Pertici multi speed power feed with NEW wheels tops off this nicely optioned clean shaper. Terms& Conditions: 1. Please ask all questions before bidding. 2. Winning bidder will pay actual freight charges. ... moreWe do not make money off of freight. Insurance, packaging, or crating. We will be glad to get you a freight quote. We also offer third party insurance to insure that freight is covered if damaged in transit at a cost of $40 per $10.000 of coverage 3. Please call(630-229-6705) or email( info@360degreemachinery.com) us for full freight options. There will be $125 custom skidding/crating fee if shipping common carrier. 4. Illinois transactions must add 7.25% sales tax unless tax exempt. 5. Please email your zip code and if it's shipping to a business with a dock or forklift OR if it's shipping to a residence and we will be glad to quote you on our low cost freight options. We charge exactly what we pay with zero mark up. We also have third party insurance available at a rate of $40 per $10.000 to protect against freight loss/damage
Wood shaper molder cutter assembly, 1 1/4" (D)
The rings are 3" and have lock down set screws. The blades have been lightly inserted fro display. So use of the assembly requires a professional level of expertise. Priority Mail. California buyer pays 9% tax.
2 1/2" Solid Crown Profile Molding Corrugated Back Knife Molder Shaper HSS 347
2 1/2" Solid Crown Custom Profile Molding Corrugated Back Knife Molder Shaper HSS. Overall length and width of cutter is 3 1/8" by 1 1/4" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. NO Template for touch up. Some minor heat transfer on face of knives. No worries. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Most of these knives were run on pine and cedar. Mostly softwood and soft hardwood. Shipping is 5.95 Priority Mail w/delivery confirmation. ... moreI will combine shipping and many sets can fit into a larger Priority Mail Box. NO International sales. On Mar-02-13 at 06:59:20 PST. Seller added the following information:
3 1/4" +/- Casing Profile Molding Corrugated Back Knife Molder Shaper HSS 349
3 1/4" +/ Casing Custom Profile Molding Corrugated Back Knife Molder Shaper HSS. Total of 4 knives. Nice profile. Overall length and width of cutter is 3 3/4" by 1 5/8" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. NO Template for touch up. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Most of these knives were run on pine and cedar. Mostly softwood and soft hardwood. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine shipping ... moreand many sets can fit into a larger Priority Mail Box. NO International sales. On Mar-02-13 at 06:59:20 PST. Seller added the following information:
2" Base Cap Profile Molding Corrugated Back Knife Molder Shaper HSS 351
2" Base Cap Base Custom Profile Molding Corrugated Back Knife Molder Shaper HSS. Overall length and width of cutter is 2 1/2" by 1 7/8" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. NO Template for touch up. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Most of these knives were run on pine and cedar. Mostly softwood and soft hardwood. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine shipping and many sets can fit into a larger ... morePriority Mail Box. NO International sales. On Mar-02-13 at 06:59:20 PST. Seller added the following information:
3 1/2" Casing Profile Molding Corrugated Back Knife Molder Shaper HSS 355
3 1/2" Casing Custom Profile Molding Corrugated Back Knife Molder Shaper HSS. Overall length and width of cutter is 4 1/8" by 2" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. Template for touch up. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine shipping and many sets can fit into a larger Priority Mail Box. NO International sales. On Mar-02-13 at 06:59:20 PST. Seller added the ... morefollowing information:
3 3/4" Casing Base Profile Molding Corrugated Back Knife Molder Shaper HSS 352
3 3/4" Casing Base Custom Profile Molding Corrugated Back Knife Molder Shaper HSS. Overall length and width of cutter is 4 1/4" by 2" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. NO Template for touch up. Some heat transfer on face of knife. No worries. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Most of these knives were run on pine and cedar. Mostly softwood and soft hardwood. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine ... moreshipping and many sets can fit into a larger Priority Mail Box. NO International sales. On Mar-02-13 at 06:59:20 PST. Seller added the following information:
Wood shaper molder corrugated blades, 1 pr (A
These blades are on 1/4" stock and have heights of 4" and maximum widths of 1 3/4" Edges are keen. Priority Mail. California buyer pays 9% tax.
3 1/4 Casing Base Profile Molding Corrugated Back Knife Molder Shaper HSS 350
3 1/4" Casing Base Custom Profile Molding Corrugated Back Knife Molder Shaper HSS. Overall length and width of cutter is 3 1/2" by 2 1/4" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. NO Template for touch up. Some heat transfer on face of knives. No worries. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Most of these knives were run on pine and cedar. Mostly softwood and soft hardwood. Shipping is 5.95 Priority Mail w/delivery confirmation. I will ... morecombine shipping and many sets can fit into a larger Priority Mail Box. NO International sales. On Mar-02-13 at 06:59:20 PST. Seller added the following information: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13fa2a6cd77-0xe6-
Original Vintage ATLAS Spindle Shaper 4 page Catalog Instructions parts list
Original Vintage ATLAS Spindle Shaper 4 page Catalog/Instructions/parts list. This is an original 1950 four page catalog No. 3500.
3 3/4" Casing Profile Molding Corrugated Back Knife Molder Shaper HSS 337
3 3/4 Casing Custom Profile Molding Corrugated Back Knife Molder Shaper HSS. With 3 flutes. Overall length and width of cutter is 4 1/4" by 2" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. NO Template for touch up. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Most of these knives were run on pine and cedar. Mostly softwood and soft hardwood. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine shipping and many sets can fit into a larger ... morePriority Mail Box. NO International sales. On Mar-02-13 at 06:59:20 PST. Seller added the following information:
3 3/4" Crown Profile Molding Corrugated Back Knife Molder Shaper HSS 340
3 3/4" Custom Crown Profile Molding Corrugated Back Knife Molder Shaper HSS. Overall length and width of cutter is 4 1/4" by 1 3/4" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. NO Template for touch up. These knives 1/4" and will fit the same head. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Most of these knives were run on pine and cedar. Mostly softwood and soft hardwood. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine ... moreshipping and many sets can fit into a larger Priority Mail Box. NO International sales. On Mar-02-13 at 06:59:20 PST. Seller added the following information: 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13fa2a6ceb2-0xf7-
2 3/4" Casing Base Profile Molding Corrugated Back Knife Molder Shaper HSS 334
2 3/4" Casing Base Custom Profile Molding Corrugated Back Knife Molder Shaper HSS. Overall length and width of cutter is 3" by 1 7/8" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. NO Template for touch up. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Most of these knives were run on pine and cedar. Mostly softwood and soft hardwood. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine shipping and many sets can fit into a larger ... morePriority Mail Box. NO International sales. On Mar-02-13 at 06:59:20 PST. Seller added the following information:
Original Vintage ATLAS 7" Metal Shaper 14 page Catalog Instructions parts list
Original Vintage ATLAS 7" Metal Shaper 14 page Catalog/Instructions/parts list. This is an original 1948 fourteen page catalog No.7B.
Japanese Foil Venser, Shaper Savant Future Sight MTG NM ASIAN EDH
Language: Japanese Condition: NM Shipping& Handling: ★combine shipping welcome★ $5.00( Registered Mail) for 1st item. Add $0.50 for each additional auctions. Registered Mail(insured. No tracking service) To Worldwide: $5.00 EMS(with insurance and tracking service) Shipping Area Cost Delivery Time Asia US$ 15.00 About 3-7 days U.S,A, Canada, Australia, Mexico US$ 20.00 About 4-7 days Europe US$ 25.00 About 4-7 days S.America. Africa US$ 30.00 About 4-7 days
GENERAL RADIO MODEL 1395-P3: Pulse Shaper - Ops&Svc Manual w/schematics
GENERAL RADIO MODEL 1395-P3: Pulse Shaper- Operations& Service Manual w/schematics Manuals in good used condition. 14 day right of return. General description: GENERAL RADIO Model 1395-P3: Pulse Shaper- Operations& Service Manual w/schematics We have in stock over 70.000 manuals for test equipment. If you don't find what you need, please give us a call. For questions or additional information. Please contact our Customer Service department at: 1-800-527-4642. Items may be listed on multiple sites. Availability is subject to prior sale. Warranty: 30days Return Right: 14day Payment Options We accept: PayPal(preferred) Major Credit Cards(additional Information may be required) Wire Transfer Texas residents Only: Sales tax will be charged(Please contact Tucker Electronics at 1-800-527-4642 before making payment) Shipping Information ... moreWe ship via Fed Ex or USPS. Approx Weight: 1 lbs. Boxed Dim: 15x12 in. Envelope Auction Sales Policy We will contact the winning bidder via e-mail with 2 business days after the auction has ended. Winning bidders must confirm their order within 3 business days after notification. Additional instructions for completion of sale will be included in the e-mail notification. Payment must be received within 7 business days after the order is confirmed. Or the winning bid will automatically be voided. Exceptions to this rule will be made on an individual basis. Please contact us within 3 business days if you need special arrangements. Tucker Electronics phone: 1-800-527-4642) Any and all state and local sales. Use, excise, privilege, and similar taxes imposed on TUCKER or which TUCKER has a duty to collect in connection with the sale, delivery, or use of any item will be added to the bid and will be payable by Buyer. If sales to Buyer are exempt from such taxes, Buyer shall furnish TUCKER a certificate of exemption. Click Here to view our other listings on eBay TE# 716699 Loc: Powered by
ADC Sound Shaper SS-VIII Graphic equalizer LED level EQ display, Works great too
Here is a nice component stereo 2 channel ADC"Sound Shaper" Mark VIII graphic EQ for the home.Office,den, studio, etc,stereo system, Perfect for those iPods and other mp3 players to fix the low fidelity sampled music.It features a bright LED slider knob for each of the 10 bands per channel controls for a visual readout of curve, dual level meters and standard RCA connections, Including tape/recorder loop. The handsome black face still looks good and was fully tested prior to auction in excellent working condition, Money back if not satisfied, Feel free to contact us with any further information you may require,Thank you for the interest in my auction.
LOCKFORMER CLEATFORMER SHEET METAL EDGER SHAPER GREAT SHAPE
LOCKFORMER CLEATFORMER SHEET METAL EDGER SHAPER GREAT SHAPE LOCKFORMER CLEATFORMER SHEET METAL GREAT SHAPE. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN ... more8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
1987 ad page - Playtex WOW shaper BRA lingerie SEXY GIRL print ADVERTISING AD
Wonderful vintage magazine PAGE advertisement for Playtex WOW With-Out-Wire underwire Bras. Only from Playtex Limited- Where beautiful new ideas take shape. This is an original magazine ad from 1987. Ad measures approx. 9" x 10 7/8" CLICK HERE to view ALL our other VINTAGE paper advertising! US Buyers- Additional ads ship for free. Please make one combined payment if possible. INTERNATIONAL buyers- PLEASE WAIT for your invoice. Additional ads can be combined- Combined s/h will depend on actual weight. xp9.
Shopsmith ER 10 Jointer-Shaper Fence 129-1X
Up for sale here is a Shopsmith ER 10 Jointer-Shaper Fence 129-1X. Used in good condition. Feel free to ask any questions. SCT2408
Craftsman Shaper ~Mod# 103.23940~ & 23 Cutters-9 Spacers-2 Miter Gauges & More!
Just back from a huge Farm Estate Auction with A LOT of fantastic woodworking tools! Craftsman Model Number 103.23940 Wood Shaper This Craftsman Wood Shaper offers a extra large and very solid cast iron work table that is clean and rust free through out. Control Lever. Quill Assembly, Quill Lock and Elevation Rod assemble are in very good condition, all operate smoothly and are problem free. The Fence is made from solid oak and has a smooth face. The entire Fence frame. Knurled Adjusting Collar and Lock Knobs are secure, solid and operate as they should. Powered by a Super-strong and durable Westinghouse ¾ HP; 3.400 RPM motor. The Wood Shaper is attached to a“Home made” cabinet that is sitting on a heavy duty flat roller. Included with the Wood Shaper is everything that I purchased with it: 23) Shaper Cutters that are all in very good ... morecondition and used for different cut styles(9) Spacers of different lengths(1) Extra Steel Pulley(1) Craftsman Molding Head kit containing 18 Cutters. 2 Spacers and 1 Molding head(2) Table Saw Miter Gauge Assembly’s; both are solid all metal and in very good working condition. The larger of the two is a Craftsman model with hold down clamp and 18" long overall. The Miter Head rotates from +/60 degrees with positive stops at 0 degrees and +/45 degrees. 1) Atlas Press Company kit containing 4 spacers of different length and 1 cutter. 1) Hand Crafted wooden box that holds all of the above. Lastly as only a Indiana Farmer could(would) do; there is also a very old and still working strong; heavy duty Eureka vacuum assembly attached to the rear of the table for sucking up and discharging saw dust. I completely went through everything on this Shaper before using it. As noted; everything works very well. Cuts smoothly, and is a solid piece of machinery. I also have a copy of the original owner’s manual from Craftsman on a small drive that I will include. Before bidding on this auction; please do a little research on similar Craftsman Shapers. Cutters and Table Saw Miters that ar
ADC SS-315X SOUND SHAPER 10 BAND STEREO EQUALIZER EXPORT MODEL? 110/220VAC
ADC SS-315X SOUND SHAPER 10 BAND STEREO EQUALIZER EXPORT MODEL? 110/220VAC This auction is for a used ADC SS-315X sound shaper 10 band stereo equalizer.The serial# is 40903621.This unit came from an estate sale. I tested this unit on my home stereo system& boy does it make a difference.I hooked it up to my JVC stereo with a couple of book shelf speakers& what a difference.It really made those speakers come alive with brilliance. All of the controls move smoothly& the display works fine.I did find some of the switches were intermittent. So I cleaned them with some De-Ox-Id. I am thinking this maybe an"export" model. In the sense that it can be run on either 110VAC or 220VAC, simply by moving a switch on the back of the unit. The unit is clean. Though I see where I missed some dirt at the top& bottom of the slider ... morecontrols.The case has some scratches on the back& top, but nothing major. I have described this unit as accurately as I can with what I know about it.I do not have a manual for this unit. If you are looking for a home equalizer to bring your system to life. This might just be what you have been looking for. I am selling this unit"TESTED" IN WORKING CONDITION" AS IS" Shipping inside the US will be USPS priority. Insured.Outside the US, contact me for shipping info. Thanks for looking& good luck. Click Images to Enlarge inkfrog terapeak. I000000. InkFrog Analytics.
BYRD SHAPER MOULDER CARBIDE INSERT T & G CUTTER HEAD MOLDER DELTA SCMI MARTIN
One Tongue and Groove Moulder/ Shaper cutter head. The head uses replacable carbide inserts. I believe the cutter head is made by Byrd. I am currently researching this. O.D. is 6" I.D. Bore is 2-1/8" height of the cutter head is 2" and the height of the carbide insert is slightly more than 1-9/16" closer to 1-19/32" Please contact before buying if more info is needed. The cutter can also be run on a shaper using an insert to reduce down the shaft diameter. The cutter head is used but in good condition, it has a few minor scratches that can be seen in the photos. Returns accepted if returned in the same condition sent and returned within seven days of recieving.
Lot 1062 Bullnose Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for 2" bullnose mouldings 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If ... moreyou buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
Lot 1060 Vee Groove Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for various useful mouldings 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you ... morebuy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
DML Detail Shaper Shaper Cutter #47474 - NEW
Preferred Checkout If you are the winning bidder. Please use my VENDIO Preferred Checkout link for fastest processing of your order! Click the Checkout button in the item listing to go directly to my checkout page. You can also click on the link in the email that I will send you after the auction closes. ONLINE credit card payments accepted through paypal. Direct credit card payments accepted by phone. For fastest processing of your order. Please use Vendio Checkout! | | | | DML Detail Shaper Shaper Cutter#47474- NEW, Click to View Image Album DML Detail SHAPER CUTTER 3- WING 1 1/4" BORE 3 3/4" LARGE DIAMETER Can be used as Coping Reversible Shaper Cutter Features: Industrial Grade Carbide ground to the industry's closest tolerances. Precision-milled bodies for an exact cut. Standard CCW rotation. Style DCC214 DML Item No. 47474 ... moreSKU No. 1609458399. Manufacturer's List Price $304.44 Buy-It-Now at 70% off of list! PART OF A $150.000 INVENTORY CLEARANCE DML INDUSTRIAL SHAPER CUTTERS Dealer Inquiries Welcome COMPLETE LIST AVAILABLE ON REQUEST EMAIL TO SHOP EARLY FOR BEST SELECTION! See shipping calculator below for shipping cost. In addition to Priority Mail. We offer UPS Ground shipping, which can be a savings on heavier items. Prices differ so be sure to select the option that best suits your delivery requirements Everything I sell is NEW. Not used or reconditioned unless otherwise noted. Most of my auctions are factory overstocks or liquidation items. Please see my OTHER AUCTIONS for more great deals or read ABOUT ME Be sure to visit my EBAY STORE. You can find hundreds of BRAND NAME tools and supplies at ridiculously low prices. With MORE arriving every week. Shop and compare. Abrasives. Saw blades Hand tools Rotary tools Precision tools. And more! Minnesota buyers add 7.125% sales tax. I will combine with other auctions to save on shipping costs. Payment, Our preferred payment method is Paypal. This is the only ONLINE payment method we offer. For non-paypal users. We do accept Visa, Mastercard
Fellows 6A Gear Shaper Operation and information book
Fellows 6A Gear Shaper Operation and information book Original vintage Fellows 6A type gear shaper machine manual describing the line of 6A type shapers. Their operation, setup and attachments. 1943. 48 pages 6" x 9" Fair condition. Previous owner markings on front cover. Pages 25, 48. Pages are clean. Though with some smudges and previous owners markings. Certain images and/or photos used in this template are the copyrighted property of Macmillan digital publishing USA and are used with permission.
Fellows Type 7 High Speed Gear Shaper Operation and information book
Fellows Type 7 High Speed Gear Shaper Operation and information book Original vintage Fellows type 7 gear shaper machine manual describing the line of 6A type shapers. Their operation, setup and attachments. copyright 1929 revised 7th ed 1947. 70 pages 6" x 9" Fair condition. Previous owner markings on front cover. Pages 31, 70. Pages are clean. Though with some smudges and previous owners markings as noted. Certain images and/or photos used in this template are the copyrighted property of Macmillan digital publishing USA and are used with permission.
Barber, Barbershop, Beauty Salon, Rolcut Hair Shaper, Cutter
Rolcut Hair Shaper/Cutter. Extra Blades. Instructions, Original Box, 3.5x2.5 Please wait until I invoice you for your purchase. I will combine auctions. And charge actual shipping.
Wood shaper molder corrugated blade set (C)
Cut on 1/4" stock. Blades are 3 7/8" high and 1 3/4" at widest point. Priority shipping. California buyer pays 9% tax.
Lot 1117 Casing Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several ... morelots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
Rockwell Shaper Complete with 3 wheel Power Feeder
Rockwell Shaper Complete with Grizzly 3 wheel Power Feeder! 3/4 Spindle; 3Phase FOR ADDITIONAL PHOTOS OR OTHER USED MACHINES GO TO: HTTP:WWW.REARDONMACHINERY.COM
Armstrong Ace Tool Holder from a small Shaper (probably 7"-10") ; w/ Boring Bar
A local company as recently consolidated its machine shop capabilities and as part of that consolidation they have closed a small research and development/ prototype shop. As a result there will be assorted tools and accessories coming available. As these items are released for disposition they will be offered for sale. I will represent the items as accurately as I am able; however. Sale is final so please ask any questions that you might have. Offered here is an Armstrong'Ace' 2046 Tool Holder that came from a small shaper. To help determine if this holder will fit your machine I took some basic dimensions. The mounting shank measures approximately 3/8" wide x 7/8" high. The bore for the tool is 1/2" Both of the boring bars shown are included. The one that is not mounted in the holder needs to be polished. As the burrs ... moreprevent it from sliding into the mount.
Unitronex Wood Shaper DFDA-4 with stile feeder
For sale is a Unitronex imported Gomnd wood shaper. Model number DFDA-4, used but still in good working condition. This shaper is powered by a 3-phase motor that provides 10 horsepower. It has RPM options of 4000, 5000, 8000, and 10000. Its table has 39" x 40" and it has a granite workspace that measures 10" x 36" This equipment comes with a stile included and has 2 adjustable axis. It also has a vacuum attachment. The entire unit weighs around 700 lb. Thanks for checking out the ad! Please feel free to comment or message if you have any further questions regarding this listing. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13fb12d48b2-0x102-
SY Industrial Grade Shaper Cutter C2030 - 3/4" bore
PLEASE READ THE AND LOOK AT THE PHOTOS BEFORE BIDDING! Items are being sold in"AS IS" used condition. SY Industrial Grade Shaper Cutter C2030- 3/4" bore In Excellent Condition- Unused*Pictures are Part of the Description* PAYMENT TERMS: Winner Agrees to Pay(PAYPAL Only) within 4 Days of Purchase. An automatic unpaid items case will be opened after this time. SHIPPING TERMS: I'm more than happy to combine shipments. Give me time to send a combined invoice so you can make one payment. You Pay Actual US Postal Service Shipping with Delivery Confirmation. I do not attempt to make money on shipping! I do not want to lose it either. I have a one day turnaround and I ship Mon-Fri. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's ... moreresponsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Thank you for Looking and Enjoy! Powered by The free listing tool. List your items fast and easy and manage your active items.
Machinist Tools Lufkin Planer Shaper Gage No.900; Nice
This is a very nice Lufkin planer shaper gage No.900. It appears in very nice condition showing minimal wear. Thank you for your time. Please email with any questions and have a wonderful day.
Lot 1113 Case Moulding /Weinig /WKW Corrugated Knives Shaper Moulder
Moulder knives for delicate custom casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
Lot 1107 Stair Rail Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for stair rail moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy ... moreseveral lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
Lot 1105 Panel Or Lip Moulding /Weinig / Corrugated Knives Shaper Moulder
Moulder knives for panel or base cap moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If ... moreyou buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months. Posted with
Lot 1104 Modern Casing Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for sleek modern casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
4 3/4" + Crown Profile Molding Corrugated Back Knife Molder Shaper HSS 317
4 3/4" + CrownCustom Crown Profile Molding Corrugated Back Knife Molder Shaper HSS. Overall length and width of cutter is 5 1/2" by 2" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. NO Template for touch up. These knives are 1/4" which also work in these heads. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I have over 200 knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine shipping and many sets can fit into a larger Priority Mail Box. NO International ... moresales. On Mar-02-13 at 06:59:20 PST. Seller added the following information:
3 1/2" Crown Profile Molding Corrugated Back Knife Molder Shaper HSS 316
3 1/2" Crown Custom Profile Molding Corrugated Back Knife Molder Shaper HSS. Overall length and width of cutter is 4" by 2" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. NO Template for touch up. These knives are 1/4" which also work in these heads. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine shipping and many sets can fit into a larger Priority Mail Box. NO International ... moresales. On Mar-02-13 at 06:59:20 PST. Seller added the following information: 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13fb5c572ee-0xfd-
1 1/2" Nose & Cove Profile Molding Corrugated Back Knife Molder Shaper HSS 321
1 1/2" Nose& Cove Profile Molding Corrugated Back Knife Molder Shaper HSS. Slight radius on reeding. Could be base molding. Overall length and width of cutter is 2 3/8" by 2 3/8" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. Template for touch up. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine shipping and many sets can fit into a larger Priority Mail Box. NO International ... moresales. On Mar-02-13 at 06:59:20 PST. Seller added the following information: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13fb5c572f9-0x104-
4 1/2" Reeded Casing Profile Molding Corrugated Back Knife Molder Shaper HSS 357
4 1/2" Reeded Casing Custom Profile Molding Corrugated Back Knife Molder Shaper HSS. Overall length and width of cutter is 5" by 2" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. NO Template for touch up. These knives are 1/4" which also work in these heads. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine shipping and many sets can fit into a larger Priority Mail Box. NO International ... moresales. On Mar-02-13 at 06:59:20 PST. Seller added the following information: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13fb5c5724f-0xfe-
5" Reeded Casing Profile Molding Corrugated Back Knife Molder Shaper HSS 358
5" Reeded Casing Custom Profile Molding Corrugated Back Knife Molder Shaper HSS. Overall length and width of cutter is 5 3/4" by 1 3/4" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. NO Template for touch up. These knives are 1/4" which also work in these heads. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine shipping and many sets can fit into a larger Priority Mail Box. NO ... moreInternational sales. On Mar-02-13 at 06:59:20 PST. Seller added the following information:
1 3/4" Deep Base Cap Profile Molding Corrugated Back Knife Molder Shaper HSS 324
1 3/4" Deep Base Cap Profile Molding Corrugated Back Knife Molder Shaper HSS. Slight radius on reeding. Could be base molding. Overall length and width of cutter is 2 1/2" by 2 3/8" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. Template for touch up. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine shipping and many sets can fit into a larger Priority Mail Box. NO International sales. ... moreOn Mar-02-13 at 06:59:20 PST. Seller added the following information:
4 1/8" Reeded Casing Profile Molding Corrugated Back Knife Molder Shaper HSS 359
4 1/8" Reeded CasingCustom Profile Molding Corrugated Back Knife Molder Shaper HSS. Slight radius on reeding. Could be base molding. Overall length and width of cutter is 4 1/2" by 2" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. NO Template for touch up. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine shipping and many sets can fit into a larger Priority Mail Box. NO International ... moresales. On Mar-02-13 at 06:59:20 PST. Seller added the following information:
4" Base Casing Profile Molding Corrugated Back Knife Molder Shaper HSS 343
4" Base Casing Custom Profile Molding Corrugated Back Knife Molder Shaper HSS. Overall length and width of cutter is 4 3/8" by 1 3/4" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. Template for touch up. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine shipping and many sets can fit into a larger Priority Mail Box. NO International sales. On Mar-02-13 at 06:59:20 PST. Seller added ... morethe following information:
4 1/4" Crown Profile Molding Corrugated Back Knife Molder Shaper HSS 336
4 1/4" Crown Custom Profile Molding Corrugated Back Knife Molder Shaper HSS. Overall length and width of cutter is 4 3/4" by 2" Please verify your machine's capacity if you don't know. Standard 5/16" Corrugated Back HSS for Molder. Very Good Condition. NO Template for touch up. These knives are 1/4" which also work in these heads. All knives are high quality steel Weining grade or similar. Many are from Schmidt. All knives run in a standard head. I now have over 250 more knife sets that will be up for auction. Smaller profiles are more suitable for a shaper. All are in very good condition. Most with template. These knives were stored properly and well maintained. Shipping is 5.95 Priority Mail w/delivery confirmation. I will combine shipping and many sets can fit into a larger Priority Mail Box. NO International ... moresales. On Mar-02-13 at 06:59:20 PST. Seller added the following information: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13fb5c5725b-0xe7-