In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
300.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
1.Features Adjustable Ozone Output: 20-100%. Assemble with Air Cooled Ceramic Tube. Desktop Structure with Carbon Steel Sprayed with Plastic Box. Use ... moreOutside Air Source or Oxygen Tank, Stable Ozone Output with High Concentration. Control Panel: Ampmeter, Ozone Adjuster, Oxygen Flowmeter, on/off, Working Indicator, Power Indicato. Air-cooled Unit: It Is an Air-cooled Unit, and the Cooling Fan Takes Away the Heat Released by the Ceramic Card and the Electric Card. Ease of Use: the Device Must Be Connected Externally, This Type of Operation Is Simpler and Safer 2.What's Included ? 1*ZA-D7G Desktop Ozone Generator 3.Specifications Oxygen Flow Rate:2-5l/Min Ozone Output:7g/H Power:130w Fuse:3a Voltage:110v Inlet and Outlet Pipe Diameter:ф6 Mm 4.Applications Laboratory: Chemic.
$
329.00
Buy It Now
Free Shipping
Condition: New
Location: La Puente, United States
Product description: ★PRP gel preparation machine is the best design product controlled by microprocessor. It can be widely used for sample storage and ... morereaction, PRP gel preparation, DNA amplification, electrophoresis pre-denaturation and serum coagulation. ★ Real-time temperature display, time countdown display, automatic fault detection and buzzer alarm function, temperature deviation calibration function, built-in over-temperature protection device. ★Convenient module replacement, easy to clean and disinfect, beautiful appearance, blue LCD display instant parameter information. ★Optional power-off automatic recovery function, auto-start operation function, improve working efficiency, intelligent algorithm, ensure the temperature control accuracy of ≤+03C in the whole process range.
$
66.23
Buy It Now
$22.83 Shipping
Condition: Used
Location: Canada
$
649.99
Buy It Now
Free Shipping
Condition: New
Location: Buford, United States
【Large Capacity Fast Ice Making】:This built-in ice maker has excellent ice making capabilities, producing 80lbs of ice in 24 hours. freestanding ice maker ... moremakes 40 clear cubes of ice every 15-20 minutes for daily use by you and your family.
$
40.00
Buy It Now
$23.95 Shipping
Condition: Used
Location: Van Buren, United States
$
99.99
Buy It Now
$10.40 Shipping
Condition: Used
Location: Cadiz, United States
High Speed Steel. 1 USED - Excellent Condition.
$
39.99
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
Free shipping to the lower 48 United States
$
25.00
Buy It Now
$8.95 Shipping
Condition: Used
Location: Highland, United States
Was Told these were for crimping lines or pipe. The Maker initial is either M or W.
$
75.00
Buy It Now
$13.00 Shipping
Condition: Used
Location: Coffeyville, United States
Approximate weight: 0.6 lbs. HM/#3/SC2 X-5/(1)GJ. WEIGHT: 0.6 LBS.
$
99.99
Buy It Now
Free Shipping
Condition: Used
Location: Wilmington, United States
Most appear new and the used ones appear to be in good/great condition. Sold AS-IS.
$
6.00
Buy It Now
$16.25 Shipping
Condition: Used
Location: Madison, United States
I have no idea what particular machine they fit.
$
39.99
Buy It Now
$18.60 Shipping
Condition: Used
Location: Woodstock, United States
$
24999.00
Buy It Now
Condition: Used
Location: Pawtucket, United States
From about 1854 to 1860 he collaborated with George H Makins(assayer to the Bank of England) to produce a "Improved Assay Balance". OERTLING fine British ... morebalances from 1847 to 1996. Circa 1860. We will load your truck from our adjustable loading dock (not crated).
$
332.50
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
It can be widely used for sample storage and reaction, PRP gel preparation, DNA amplification, electrophoresis pre-denaturation and serum coagulation. ... moreCapacity: 12 5ml (syringe). Gross weight: 3.5kg.
$
651.19
Buy It Now
Free Shipping
Condition: New
Location: Hayward, United States
Making sausage has never been fun and easier! Our advanced design will provide years of trouble free operation. Base is easily mountable to most surfaces. ... moreHakka Brothers Corp. Sausage Stuffer. Hamburger Patty Maker.
$
332.50
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Product description: ★PRP gel preparation machine is the best design product controlled by microprocessor. It can be widely used for sample storage and ... morereaction, PRP gel preparation, DNA amplification, electrophoresis pre-denaturation and serum coagulation. ★ Real-time temperature display, time countdown display, automatic fault detection and buzzer alarm function, temperature deviation calibration function, built-in over-temperature protection device. ★Convenient module replacement, easy to clean and disinfect, beautiful appearance, blue LCD display instant parameter information. ★Optional power-off automatic recovery function, auto-start operation function, improve working efficiency, intelligent algorithm, ensure the temperature control accuracy of ≤+03C in the whole process range.
$
549.95
Buy It Now
Free Shipping
Condition: Used
Location: Lynchburg, United States
We stand behind everything we do 100%.
$
99.00
Buy It Now
$13.05 Shipping
Condition: Used
Location: Canonsburg, United States
Three miscellaneous shaper arbor spindles..
$
12500.00
Buy It Now
Condition: Seller refurbished
Location: Newport, United States
Orton Type "F" Ship Shaper/Router,40' x 60" Table Size, 7-1/2 hp, 230 Volts, 3 Phase, Oil Mist Lubrication. Machine has been Completely Restored. Can ... morebe used as a Shaper or Router. Comes with a Mandrel with Top Bearing Attachment so Machine can be used as a Tilting Spindle Shaper. Can also be used as a Tilting Spindle Router with Collet Chuck Attachment with 1" HSS Spiral Cutter and Template Guide. Heavy duty Spindle with Brown and Sharpe #11 Tapered Socket in Spindle. Spindle Tilts 30 degrees forward and 45 degrees backward. Great for Cutting Changing Bevels. Buyer pays Crating and Freight. More Photos and Video Available.Approx. weight 3000lbs.
$
70.00
Buy It Now
$5.90 Shipping
Condition: Used
Location: Walnut Grove, United States
Set of 5/16 corrugated moulding knives with sharpening template. 3.5” casing pattern, Weinig M-3+HSLightly used, comes with template and ready to run.Knives ... morefor wood molder
$
24.99
Buy It Now
$10.70 Shipping
Condition: Used
Location: Lebec, United States
$
28.80
Buy It Now
$5.70 Shipping
Condition: Used
Location: Leander, United States
$
449.00
Buy It Now
Condition: Used
Location: Pawtucket, United States
Gold International Machinery Corporation | Stamping Press Tool and Die Set to Make Religious Cross- Jewelry. Pendant! Our Inventory Number: 0585-390 THE ... moreDIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALS Technical Specifications: Religious Cross Die Set, Cross size: 1-1/4" x 5/8" Overall die set size: 9" x 8" Weight: 30 Lbs. approx) This can be shipped via UPS Ground. Price varies depending on your location. Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal business hours(9am-5pm EST) Monday through Friday at 1-800-619-GOLD. Please ask to speak with David Gold. However. We do recommend that you first send us an E-Mail with your questions. Phone(M-F 9am-5pm EST) 1-800-619-GOLD(4653) Please
$
110.00
Buy It Now
$12.60 Shipping
Condition: Used
Location: Dekalb, United States
Good condition, bearing is sticky. If bearing needs replacing the bearing # is 204PP and is readily available. This is of course incomplete. We do have ... moreseveral complete ones listed if you need one.
$
22.08
Buy It Now
$18.99 Shipping
Condition: Used
Location: Canada
$
1700.00
Buy It Now
Condition: Used
Location: Edina, United States
LED LIGHT SIGN*Now we're making a special offer to customize your own design sign.Don't hesitate to contact me, if you interested in. Product ... moredetails: One brand NEW LED light sign Approximate size: 300mm x 220mm(12" inch by 8 3/4" inch) including the top aluminium cover part) Engraved by best Clear Acrylic Plastic We provide a 2 pin plug(US standard) Provide 220/ 110 voltage*US 2 pin plug: USA. CA, Brazil or other countries*AU adaptor: Australia*EU adaptor: UK. France, European Saves up to 88% more energy than traditional light signs No on/ off button. Item light up once you plug-in*If you want to switch on/ off the sign.We prefer you to pay the extra has a remote We have 7 color of each sign. If you want to choose another color, you can contact me to change color before you paid. Advertise Image is for reference only. The real object should be considered as final. Color of the products may have lightly different from individual computer monitor. If you can't accept this little different. Please don't bid. Thank You. PLEASE NOTE THAT WE TOOK THE PHOTO IN THE DARK ROOM. 7 C o l o r s are available If you want to change the color. Please feel free to contact us. No extra service fee will be charged Remote Control Function: Optional) Extra USD10 for each sign have On/ Off Button Can change the color as you like(7 colors) Slow Motion Flash Fast Motion Flash*If interested in. Please kindly contact me for more details. We also welcome customize your own image sign Shipment Lead Time: Shipment method: By Register Airmail(With Tracking no. Process& Packing time: 3 BUSSINESS DAYS once confirm payment Normal Worldwide Delivery lead time: 14-21 business days(Monday to Friday.Exclude holidays and weekends) parcel maybe delay. In the high peak period, Please kindly few more time for arrive* We are ship from Hong Kong in directly Payment: Paypal ONLY Need to pay within 5 days(unpaid strike will be consider for non-paid case) If ideal buy more than one. Please await a combine invoice
$
149.99
Buy It Now
$45.42 Shipping
Condition: Used
Location: Lockport, United States
We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose. ... moreWe did our diligence cleaning this item, but this item can still use a good wipe upon receipt.
$
89.99
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
Free shipping to the lower 48 United States
$
393.30
Buy It Now
Free Shipping
Condition: New
Location: United States
Specification Color: Silver Material: Stainless Steel. PE Composition: Dough Pressing Machine, Closing Machine and Molds Function: Pressing dough, Making ... moreBuns Uses: Home Kitchen, Commercial Mold: Package Size: 30*12*10cm/11.8*4.7*3.9in Product Diameter: 5/5.7/6.2cm(1.98/2.24/2.44in) Gross Weight: 1.5kg/3.3lbs Net Weight: 1.4kg/3lbs Dough Pressing Machine: Model: TBP332-02-B Package Size: 42*29.5*16cm/16.5*11.6*6.3in Product Size: 26*12.5*50cm/10.24*4.92*19.69in Handle Length: 30cm/11.81in Gross Weight: 6kg/13.2lbs Net Weight: 5.2kg/11.5lbs Closing Machine: Model: TBP332-01-B Package Size: 30.8*27*20cm/12.1*10.6*7.9in Product Size(L*W): 24*24cm/9.45*9.45in Hole Diameter: 6cm/2.36in Handle Length: 30cm/11.81in Gross Weight: 5.25kg/11.6lbs Net Weight: 4.9kg/10.8lbs.
$
369.95
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Stainless steel construction is durable and easy to clean. 1 x Sausage Maker. Saw Band Size: 82"(L) x 5/8"(W). 1 x 2-In-1 Electric Band Saw. Stainless ... moreSteel Sliding Tray - Convenient sliding tray ensures proper cuts and maximum safety.
$
617.49
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
In actual test conditions, ice production capacity is up to 162.7 lbs/24 h at 21°C/70°F, 10°C/50°F ambient/water temperature. It has a maximum ice storage ... morecapacity of 66 lbs and can keep your ice insulated for up to 8 hours.
$
55.20
Buy It Now
$14.96 Shipping
Condition: Used
Location: Las Vegas, United States
Technical Specifications: 1 AC input voltage…100-240VAC(World Wide) 2 Input frequency…50-60Hz 3 Smart device surge protection for over voltage. Temperature ... moreand short circuit protection 4 Strong built for heavy duty and long usage performance 5 UL SA CE RoHS certified equipment Compatible Model# or Part# Replacement Power Supply AC Adapter For Brother P-Touch PT-D200 PTD200 PT-D200VP Label Maker Printer Package Content: 1 AC Adapter(We are Specialists in OEM AC power adapter for many devices and equipments. Welcome multi quantity quotations. We can custom-make any Voltages. Amperages and various connectors power supply. Please let us know at eBay: If you have any need. Payment: We accept PayPal. Payment would Due at 7 days of bidding. eBay will file Unpaid Item Dispute if payment is not received after this time length. Shipping: We ship worldwide. We have daily shipping. Payment received before 6:00 PM ET would be processed in Same DAY(Express/Expedite Service: before 4:30 ET) We only ship to PayPal confirmed address. It's your responsibility to verify your shipping address when you are checking out. After the real time shipping processing. Address could not be changed. If required to change the shipping address after processed, A fee would apply. International Order: We welcome international orders. Customers would be responsible for the duties and taxes due. If customers choose the expedite/express service. A local phone number is required by the shipping carrier, so please include a phone number when paying the order. Feedback: We have reliable and serious commitment. Any problems, any issues, please contact us first, report the problem detail, we will be handy to offer help, will take good care of your order problem. If you satisfy our product and service, please leave positive feedback to encourage us. If something goes wrong, please contact us, we will take good care of it, turn your eBay experience to be a happy and positive experience. Wa
$
3500.00
Buy It Now
Condition: Used
Location: Pawtucket, United States
Gold International Machinery Corporation | Antique L Oertling 2500 Troy Ounce Brass Counterweight with Carrying Case and Bridge Type Carrying Handle Our ... moreInventory Number: 1348-385 Technical Specifications: Good Condition Antique L Oertling 2500 Troy Ounce Brass, Counterweight with Carrying Case, Mahogany Wood Case. Dovetail Construction Original Case. Made in England, Carrying Handle, 11.25" 13.5" with handle) Height. 8" Diameter Founder Ludwig Oertling(1818-1893) was a German instrument maker who came to England in 1844 and worked as a instrument maker. In 1847 he set up his own business which at sometime was at 12 Store Street. London. From about 1854 to 1860 he collaborated with George H Makins(assayer to the Bank of England) to produce a"Improved Assay Balance"It was so successful it became the prototype for many generations of Oertling assay balances. From 1861 to 1867 he worked in partnership with Edward Wilds Ladd in London.The earliest known Oertling balance was manufactured in London in 1847;known as the Beale balance,named after the person who purchased it for three pounds and seventeen shillings.This balance survived until about 1992 when it sadly went missing during the move from St Mary Cray to the Avery site at Smethwick. After the death of Ludwig Oertling in 1893 his son Henry ran the company until his death in 1921.The company was sold to W& T Avery in 1925 and continued to manufacture at Naylor Road.Peckham in south London.This factory was badly damaged by German bombing during the second world war. In 1952 the company moved to a purpose built factory at St Mary Cray Orpington. Kent. It kept open a repair centre at 23 Charterhouse Street, London which closed in about 1960.In 1992 the company moved to the Avery site(Soho Foundry) at Smethwick,Birmingham. The last Oertling balances were manufactured in 1996. Many are still in use to this day(2012) Earlier models after being in use for many years have become collectors items and are tribute to the very fine engineering a
$
90.00
Buy It Now
Free Shipping
Condition: Used
Location: Bennet, United States
$
599.00
Buy It Now
Condition: Used
Location: Pawtucket, United States
Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Pitch.376". We’re conveniently located on the East ... moreCoast between Boston and New York. Overall die size: 9" x 8".
$
599.00
Buy It Now
Condition: Used
Location: Pawtucket, United States
Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Horse shoe size: 1/2" x 1/2"(approx,). We’re conveniently ... morelocated on the East Coast between Boston and New York.
$
449.00
Buy It Now
Condition: Used
Location: Pawtucket, United States
We’re conveniently located on the East Coast between Boston and New York. Gold International Machinery Corporation. Die Set Size: 9" x 8". We are always ... moreavailable to handle your requests.
$
350.00
Buy It Now
$21.40 Shipping
Condition: Used
Location: Waterford, United States
Hi this is a rack tool setter that will work on SH45 machines all the way up to SH600 style maag gear rack cutting machines.
$
202.35
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Air Cushion Machine: The is an easy-to-use air cushion machine for medium shipping volumes in order to safely pack the goods. The machine is robust, compact ... moreand therefore easy to transport in the warehouse and can be used flexibly. It is not only suitable for use in the warehouse, but also in the office or at home. The air cushion system is extremely powerful with a production speed of up to 8 m / min and a wide variety of sizes and shapes can be processed to produce air cushions and air mats. Features: Simple and intuitive operation Short warm-up time Speed ​​up to 8m / min Regulation of air air volume and temperature possible Low noise Easy maintenance Specification: Air cushion machine : Nominal power: 200W Input voltage: 110V Nominal frequency: 50Hz Air volume:.
$
629.99
Buy It Now
Free Shipping
Condition: New
Location: Fullerton, United States
Woodpecker EndoMatic Cordless Endo Motor Built-in Apex Locator, 2 in1 Endo System. One Year Warranty. The file position is shown in the display screen. ... moreMaximum compatibility. Built-in 20+ file systems, wide speed and torque range make EndoMatic compatible with most file system such as FKG, Dentsply, Edge Endo, Vakker, XP-endoand Shaper etc on the market.
$
39.99
Buy It Now
$40.00 Shipping
Condition: Used
Location: Huntington Beach, United States
HEAVY Delta Rockwell Shaper TABLE Sr-101 has MITER SLOT PICK UP SO CALIF. PICK UP IN FOUNTAIN VALLEY SO CALIF NEAR DISNEYLAND Here is a used HEAVY Delta ... moreRockwell Shaper TABLE Sr-101 MITER SLOT. RUSTY TOP.
$
8.00
Buy It Now
$4.00 Shipping
Condition: For parts or not working
Location: Brick, United States
WALKER TURNER SPINDLE SHAPER, 4- 1/4 x 20 Gibb nuts and tapered.
$
100.00
Buy It Now
$15.45 Shipping
Condition: Used
Location: Milwaukee, United States
It is 1-AL, 1/2" threads, 48 Pitch, Right Hand Thread. I do not know who the maker is.
$
180.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Bennet, United States
Shaper cutters never used.
$
75.00
Buy It Now
$15.95 Shipping
Condition: Used
Location: Orlando, United States
MT2 x 1 1/2” x 4” Arbor for holding Shaper Cutters for Sharpening. OAL 8” or to be used on a Wood Shaper. The end of the Taper has a Thread size of 8MM ... moreX 125I listed these as used but they where never used, they had some dust and slight rust on it but was never used.Item might show blemishes on steel. Shipped with USPS Priority Mail.
$
59.99
Buy It Now
$10.00 Shipping
Condition: Seller refurbished
Location: Reidsville, United States
$
39.99
Buy It Now
$10.00 Shipping
Condition: Used
Location: Reidsville, United States
PHOTOS OF ACTUAL ITEM.
$
99.99
Buy It Now
Free Shipping
Condition: Used
Location: Wilmington, United States
Most appear new and the used ones appear to be in good/great condition. Sold AS-IS.
$
449.00
Buy It Now
Condition: Used
Location: Pawtucket, United States
Gold International Machinery Corporation | Stamping Press Tool And Die To Make Small Heart- Jewelry Pendant Our Inventory Number: 1575-390 THE DIE SET ... moreWAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALS Technical Specifications: Overall die set size: 9" x 8" Weight: $30 Lbs. approx. This can be shipped via UPS Ground. Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal business hours(9am-5pm EST) Monday through Friday at 1-800-619-GOLD. Please ask to speak with David Gold. However. We do recommend that you first send us an E-Mail with your questions. Phone(M-F 9am-5pm EST) 1-800-619-GOLD(4653) Please E-Mail David Gold anytime at. Please note that freights costs are determined by the weight. Size, and desti
$
4440.00
Buy It Now
Free Shipping
Condition: New
Location: Bellingham, United States
LIKE NEW. LESS THAN 20 HOURS USE ON THIS MACHINE* ADDITIONAL ITEMS with Shaper! 2- Amana 54117 15 degree traditional raised panel 3-3/8 inch diameter ... morerouter bit. Original price $100.00. 1- Amana 55370 reversible stile& rail traditional router bit. Original price $110.00. 1- Woodstock 3" moulding cutterhead 1" bore. Original price $90.00. 1- Woodstock D1700 2" moulding cutterhead. Original price $80.00. Features of Shaper: Spindle sizes: 3/4" 1 and 1-1/4" x 7-1/2" Spindle travel: 3-1/4" Spindle capacity: 5" 1-1/4" spindle) Table counterbore: 7" x 5/8" deep. Maximum cutter diameter: 5-7/8" Spindle speeds: 3600. 5100, 8000, and 10000 RPM. Table size: 35-1/2"W x 28"D. Overall dimensions: 28"D x 35-1/2"W x 42"H. Heavy-duty. Precision-ground cast iron table and fence assembly. One-piece cabinet style stand. Epoxy paint. Independent. Micro-adjustable fence with 4" dust port. Shielded and permanently lubricated ball bearings. 5 H.P. totally enclosed fan cooled. 220V, single phase, 14 Amp motor. Wight approx. 700lbs.
$
449.00
Buy It Now
Condition: Used
Location: Pawtucket, United States
Gold International Machinery Corporation | Stamping Press Tool And Die To Make Diamond(Pitch.470) Jewelry Pendant Our Inventory Number: 1631-390 THE DIE ... moreSET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALS Technical Specifications: Overall die set size: 9" x 8" Weight: 30 Lbs. approx. This can be shipped via UPS Ground. Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal business hours(9am-5pm EST) Monday through Friday at 1-800-619-GOLD. Please ask to speak with David Gold. However. We do recommend that you first send us an E-Mail with your questions. Phone(M-F 9am-5pm EST) 1-800-619-GOLD(4653) Please E-Mail David Gold anytime at. Please note that freights costs are determined by the weight. Size,
$
74.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Lowville, United States
Delta shaper spiral gear, part # 432020510002Brand NEW, I only opened the sealed envelope to take the picture. This is an “old stock” OEM Delta shaper ... morepart, it will fit many different model shapers, please cross reference for yourself.
$
90.00
Buy It Now
$9.00 Shipping
Condition: New – Open box
Location: Oxford, United States
2 step MOTOR pulley for Powermatic shapers with a 7/8" shaft and for a 3V belt. 4-1/2" and 5" pulley od.
$
199.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Wilmington, United States
Most appear new and the used ones appear to be in good/great condition. Sold AS-IS.
$
62.50
Buy It Now
$17.42 Shipping
Condition: New
Location: Duncan, United States
Model # 13006. Magnetic base: disc type magnet with 85 lbs. Length of flex arm with magnet: 10". Base Magnetic. Shield swivels and locks 360° around ... morethe clock. Curved plastic shield on rugged flexible goosenecks.
$
3500.00
Buy It Now
Condition: Used
Location: Pawtucket, United States
Gold International Machinery Corporation | Antique L Oertling 2500 Troy Ounce Brass Counterweight with Carrying Case and Bridge Type Carrying Handle Our ... moreInventory Number: 1348-385 Technical Specifications: Good Condition Antique L Oertling 2500 Troy Ounce Brass, Counterweight with Carrying Case, Mahogany Wood Case. Dovetail Construction Original Case. Made in England, Carrying Handle, 11.25" 13.5" with handle) Height. 8" Diameter Founder Ludwig Oertling(1818-1893) was a German instrument maker who came to England in 1844 and worked as a instrument maker. In 1847 he set up his own business which at sometime was at 12 Store Street. London. From about 1854 to 1860 he collaborated with George H Makins(assayer to the Bank of England) to produce a"Improved Assay Balance"It was so successful it became the prototype for many generations of Oertling assay balances. From 1861 to 1867 he worked in partnership with Edward Wilds Ladd in London.The earliest known Oertling balance was manufactured in London in 1847;known as the Beale balance,named after the person who purchased it for three pounds and seventeen shillings.This balance survived until about 1992 when it sadly went missing during the move from St Mary Cray to the Avery site at Smethwick. After the death of Ludwig Oertling in 1893 his son Henry ran the company until his death in 1921.The company was sold to W& T Avery in 1925 and continued to manufacture at Naylor Road.Peckham in south London.This factory was badly damaged by German bombing during the second world war. In 1952 the company moved to a purpose built factory at St Mary Cray Orpington. Kent. It kept open a repair centre at 23 Charterhouse Street, London which closed in about 1960.In 1992 the company moved to the Avery site(Soho Foundry) at Smethwick,Birmingham. The last Oertling balances were manufactured in 1996. Many are still in use to this day(2012) Earlier models after being in use for many years have become collectors items and are tribute to the very fine engineering a
$
14.00
Buy It Now
$4.00 Shipping
Condition: Used
Location: Saint Louis, United States
$
349.99
Buy It Now
Free Shipping
Condition: Used
Location: Laurel, United States
$
75.19
Buy It Now
$5.47 Shipping
Condition: New
Location: Woodbridge, United States
ITEM: NEW PREMIUM GRADE SET OF 9 EACH OPTICIAN ! OPTICAL PLIERS,EYEGLASSES TOOL SET. 2 EACH DOUBLE NYLON FLAT JAW OPTICAL PLIER ! JEWELERY MAKING ! 1 ... moreEACH NOSE CURVE PLIER OPTICIAN OPTICAL---107K-.
$
500.65
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
Capacity: 15l. Features: Vertical. Multifunctional Electric Operation, Simple and Convenient. Type: Electric. 1 Dough Stick Machine. Your satis faction ... moreis our ultimate goal.
1 2 3 4 5 6 7 8 9 10 11
 In 

Former Listings  
 
Lot of 4 Bluecoat Packet Shaper 900 PS900-L512K 512KB 090-02804 No AC Adapters
SquareTrade © AP6.0 Call Us: 636)410-0496 | Visit Our Lot of 4 Bluecoat Packet Shaper 900 PS900-L512K 512KB 090-02804 No AC Adapters Basic Specs Additional Information Manufacturer: BlueCoat Model: PS900-L512K Two Units are in good working condition. Two Units Have Fan Failure Issues A/C Adapters Not Included YES M25 884150017 884150019 884150018 884150015 Lot of 4 Bluecoat Packet Shaper 900 PS900-L512K 512KB 090-02804 No AC Adapters Contact Us, Payment, Condition, Shipping, Warranty, About Us, We're here to help with your computer purchase. If you have a question about this item. Please feel free to call us at(636)410-0496. Our hours of operation are Monday-Friday. 9am-6pm, and Saturday 9am-2pm Central time. We do respond to every email that is sent to us within 24 hours except on weekends. If you do not receive a response, please ... morecheck your email filters to see if our return email was rejected. For after hours or weekends, please use email to contact us. We accept PayPal. Visa, MasterCard, American Express and Discover though Paypal Merchant Services. International customers must pay via PayPal in US Dollars. Missouri, Arizona, Nevada, South Carolina, New Jersey and Texas customers will be charged State Sales Tax. Condition Information: EPC is proud to offer you business-grade. Off-lease computer equipments of all kinds. Whether it's a laptop, desktop, LCD, printer or one of our other amazing deals, each piece is coming to you off-lease. As such, while the physical condition of the machine may feature small scratches or blemishes, each piece is in good working condition, ready to provide you the best experience possible. Our equipment comes from businesses all over the world. Who have recently engaged in a new lease, providing the items that you see here at our online eBay store. Business-grade machines are a literal step-up in quality from standard, big-box store equipment. It's made to last and it's truly the largest difference between the stuff you"can get" and the stuff you mu
Bridgeport shaping tools for Model E shaper
Bridgeport Model E shaper tooling. Free shipping lower 48 states only.
Vintage Lumber Mill Band Saw Hanchett Swage Shaper Works Wks Blade Swaging Tool
Selling this old swaging/shaping tool used on bandsaw blades. Hanchett has a web site with information on a similar tool. It is marked Hanchett Swage Wks B2164 No.2 pat 1909. Band Swage Shaper. Made in Big Rapids Mich. A little surface rust. But not bad. A chip out of one end of the guide or something that is not currently in the in use position. The other end looks the same and is in the in use position. Would be an expensive pice of equipment. Posted with
GLADU shaper cutter molder head 1 1/4 bore
NAP GLADU 1 1/4 bore SHAPER CUTTER HIGH QUALITY. Ready to work very good condition no reserve. INTERNATIONAL PLEASE CONTACT US FOR SHIPPING COST PAYPAL ONLY
Freud, shaper cutter, 1 1/4 inch bore, 1 3/16 tall, 3 1/2 inch 3 carbide wings
Freud shaper cutter interlocking cutter No.N 18000 031 three carbide wings 1 1/4(32mm) bore 3 1/2 inch(90mm) diameter. 1 3/16 inch(30mm) tall. Sharp. International bidders ask for shipping quote before bidding. combine shipping 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13e032317b5-0xff-
VINTAGE 1950 STANLEY PORTABLE ELECTRIC TOOLS & ROUTER-SHAPER WOODWORK CATALOGS
5 DAY AUCTION! 1950 STANLEY PORTABLE EL ECTRIC TOO LS& ROUTER-SH APER CATALOGS 2 PCS PO RTABLE ELE CTRIC TOOLS FOR THE HOME WORKSHOP 12 PGS RO UTER-SHAPER. BENCH SHAPER, PLANER& ACCESSORIES 1 8 PGS. INCLUDES 4/1/1 950 PRI CE LIST 2 PGS YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H IS $6.50 USPS PRIORITY MAIL. EACH ITEM IS SAFELY PACKED WITH CARDBOARD INSERT ALL INVOICES MUST BE PAID WITHIN 3 BUSINESS DAYS IF YOU HAVE ANY QUESTIONS REGARDING PAYMENT PLEASE EMAIL ME PLEASE DO NOT ASK TO BUY A PHOTOCOPY DURING OR AFTER AUCTION. COPIES ARE NOT AVAILABLE I DO SEND 2ND CHANCE OFFERS ON OCCASION IF I HAVE DUPLICATES. EMAIL ME TO VERIFY I SENT IT IF YOU'RE NOT SURE IT CAME FROM ME. IF YOU DON'T WANT TO RECEIVE 2ND CHANCE OFFERS YOU MIGHT WANT TO USE THE EBAY FEATURE THAT WILL ALLOW YOU TO'OPT-OUT' ... moreOF RECEIVING 2ND CHANCES FROM SELLERS. BUYER CAN COMBINE SHIPPING ON MULTIPLE PURCHASES. IF YOU BUY 1 COST IS $6.50. IF YOU BUY MULTIPLE ITEMS COST WILL STILL BE ONLY $6.50 TOTAL. SHIPPING COSTS ONLY INCREASE ON MULTIPLE PURCHASES IF YOUR ORDER CAN'T FIT IN A PRIORITY MAILER AND HAS TO BE PACKED OTHERWISE. SHIPPING& HANDLING CHARGES ARE NOT NEGOTIABLE. EVERYBODY PAYS THE SAME. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13e0327ee56-0xf4-
Freud, shaper cutter, 1 1/4 inch bore, 1/2 tall, 5 1/2 inch 3 carbide wings
Freud shaper cutter ogee panel cutter No.N 18000 208 three carbide wings 1 1/4(32mm) bore 5 1/2 inch(140mm) diameter. 1/2 inch(12mm) tall. Sharp. International bidders ask for shipping quote before bidding. combine shipping
BEVEL EDGE CUTTERS FOR SHAPER OR MOLDER - WOOD MOLDING #5
Up for auction is a pair of used heavy duty cutters for a shaper or molder cutter head. This is a set for large radius. They are 5/16" thick. 3-3/4" long and 2-1/4" high. Check out my other auctions for more cutters. Thanks for looking and good luck bidding. I combine shipping. $5 for the first item and only $2 for any additional items.
Wood shaper molder blades, knives, a set of two, crown molding
These blades are cut on 5/16" stock and have a width of 4" Priority Mail. California buyer pays 9% tax.
CORRUGATED CUTTERS FOR SHAPER OR MOLDER #29
Up for auction is a pair of cutters for a shaper or molder he ad. They are used corrugated cutters in good condition. This set is 3-5/8" wide and 5/16" thick and they are a matched set of 2. Check out my other auctions- I have other cutters listed and I will combine shipping. Shipping on 1st set is $5 and only $2 for each additional set. Shipping by Priority mail. Thanks for looking and good luck bidding.
COURMATT Groove Shaper Milling Body w/Carbide Inserts CII-16045-30-4 | FAST-Ship
PLEASE READ ENTIRE LISTING! You are considering a: COURMATT Groove Shaper Milling Body w/Carbide Inserts CII-16045-30-4 PLEASE view ALL Pictures! I have included TEN photos for close-up and careful examination This auction will include: COURMATT Groove Shaper Milling Body w/Carbide Inserts CII-16045-30-4 as pictured 160mm diamete 30mm bore 4 inserts ~ PLEASE view ALL the pictures before bidding. As to what is included and condition ~ Photo is of ACTUAL auction item. NOT a stock picture FAST SHIPPING I will ship USPS Priority for FASTEST service Lower 48 continental US Alaska& Hawaii. Contact me for shipping costs NO INTERNATIONAL Please check out my other items! I have many other tools up for auction! Feedback is VERY Important to me! I strive for 100% Buyer Satisfaction. POSITIVE FEEDBACK and nothing less than ALL FIVE STARS If there ... moreis any problem with your purchase. PLEASE contact me PRIOR to leaving Feedback I am a Hard working Seller with the buyer in mind. Please give me the opportunity to work it out Thanks in advance for your consideration
Delta/Rockwell ? Shaper Cutter Spindle 5/16" spindle.
Delta/Rockwell? Shaper Cutter Spindle. 5/16" spindle. Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Shaper Cutter , HSS, 1/2" bore KL-43,
Shaper cutter. HSS. 1/2" bore# KL-43.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Shaper Cutter #KL-3 ,1/2" bore HSS ! Rare, Vintage
Shaper cutter.Cutter# KL-3. A 1/4" straight or rabbet cutter. Cutter has 1/2" bore and is HSS. Vintage! Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Delta/Rockwell Moulding Shaper Cutter Knives # 252 Style "C"
Delta/ Rockwell Moulding Shaper Cutter Knives! Catalog# 252 Style"C" Set of three knives.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Shaper Cutter , HSS, 1/2" bore KL-41, Base shoe cutter
Shaper cutter looks like a base shoe cutter. HSS. 1/2" bore# KL-41.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Delta/ Rockwell Shaper cutter # D-121, HSS, 1/2" bore ! Rare, Vintage
Delta/Rockwell Shaper cutter# D-121. This is a rare cutter. Has 1/2" bore and is HSS. Vintage! A female sash cutter. See other auction for the mate.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Delta/Rockwell Shaper Cutter # D-138 ,1/2" bore HSS ! Rare, Vintage
Delta/Rockwell Shaper cutter# D-138. Cutter has 1/2" bore and is HSS. Vintage! Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Delta/Rockwell Shaper Cutter # D-139 ,1/2" bore HSS ! Rare, Vintage
Delta/Rockwell Shaper cutter# D-139. Cutter has 1/2" bore and is HSS. Vintage! Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
2 Boxes of Shaper Molder Knives Blades 701370 & 701369. Unknown Application
CALL 309-261-5695 FOR QUESTIONS. 2 Boxes of Shaper Molder Knives Blades 701370& 701369. Unknown Application Came out of closed commercial cabinet shop. Not sure what fits. View all photos. Check out my! Payment due within 7 days of auctions end.
Delta/ Rockwell Shaper cutter # D-136, HSS, 1/2" bore ! Rare, Vintage
Delta/Rockwell Shaper cutter# D-136. This is a rare cutter. Has 1/2" bore and is HSS. Vintage! A cove and bead moulding RH. cutter. See other auction for the mate.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
ROCKWELL/DELTA 3/4" SHAPER SPINDLE AND BEARING
THIS SPINDLE FITS DELTA 2 AND 3hp HEAVY DUTY SHAPER. 2 1/4" X 3 1/2" BEARING SLEEVE. LONG SPINDLE 4" UNDER LOCK NUT, 2 3/4" PULLEY. THE SPINDLE AND BEARING SLIDES INTO THE BEARING HOSING ON THE SHAPER. BEARINGS ARE SMOOTH AND PERFECT WORKING CONDITION. WILL SHIP TO LOWER 48 ONLY) THANKS FOR LOOKING TAKE A LOOK AT MY OTHER ITEMS
Davis & Wells Wood Shaper (Woodworking Machinery)
BUYER MUST EMAIL PRIOR TO PURCHASE TO RECEIVE ACCURATE TOTAL WITH FREIGHT/CRATE CHARGES ALL CRATING& FREIGHT CHARGES ARE BILLED SEPARATELY FROM THE PURCHASE PRICE OF THE ITEM Davis& Wells Wood Shaper Features: This Davis& Wells Wood Shaper features an enclosed cast iron base. It has a 3HP/3PH motor with a 1" shaft. Technical Specifications: 3HP. 230V, 8.5Amp, 3Ph 1" Shaft Spindle Travel: 2-3/4" 4" Capacity Under Nut*Specifications listed are to the best of our knowledge* Verification available upon request* Condition: 3) Used/ Good Working Condition Our ratings are as follows: 1) New Surplus: Equipment or parts are new. 2)Demo/Floor Model: Demonstration use only. Like new. 3) Used/Tested: A complete test/cycle was performed and no issues were found. 4) Used/Pulled/Good: Pulled from a working unit. And because ... moreof proprietary design, the complete working unit was de-manufactured, and the parts sold. 5) Used/Untested: Items that we did not test or cannot test. This item was received by us as an individual part or integrated equipment that could not or was not tested. PLEASE VISIT OUR EBAY STORE FOR MORE GREAT PRODUCTS! Payment: Please do not submit payment until you receive a final invoice with all applicable charges. Should you submit payment without shipping. Handling charges, and applicable tax you will receive a separate invoice. Items will not be shipped until invoice is paid in full. Paypal is the preferred method of payment. Please email for alternate methods of payment should you wish to pick-up your item in person. Payment is expected within 5 business days from the date of sale. If payment is not received within 5 business days. The item will be re-listed and a non-paying bidder alert will be submitted to eBay. If you will not be able to submit payment within the 5 day period, please notify us immediately. We may be able to offer an extension. This arrangement is on a case by case basis. Shipping: Buyer is responsible for all shipping. Crate, freight charges, and any applica
Powermatic 26 shaper w/ mobile base mint condition! Never used...then restored.
Barely ever even used. Then restored by a retired machinist. Most likely came from Boeing's wood shop where he worked, why they would need a shaper I have no idea. Has brand new Marathon 3hp motor in it!3phase) I might have a 3hp single phase for it. Bearings are smooth. Comes w 3/4 and 1/2" spindles. Custom heavy duty welded mobile base. Has 2 extension wings for extra work space. And comes with reversing switch. Also note that all the throat plates are there, as well as all the fence hold downs-the stuff thats always missing on a shaper.which tells you that this thing has been babied. I have a set of wrenches that came with it too. Trying to figure out if they are for the shaper. Will have video of it running soon. Be sure to check my other listings for similarly restored PM stuff. Local pickup or I drop off at Phila area freight ... moreterminal with it bolted to a skid and shrink wrapped. Crating is extra. Posted with
Fellows (MTD) 10-2 CNC Gear Shaper
SquareTrade © AP6.0 Fellows(MTD) 10-2 CNC Gear Shaper 36113- Allen Bradley Panel View Plus 1000 Control- Coolant Tank w/ Magnetic Separator Machine is currently still setup in Ypsilanti Michigan but will be professionally disassembled for transport and loaded at no cost to buyer. We have not tested this machine. It is from a large automotive transmission facility that closed. Buyer inspection is encouraged and please call us before bidding. Earliest availability will be late June and an exact date is unavailable. Sold in As-Is Condition. Bullseye Industrial Sales LLC Middlebury. IN 46540 574-825-4990 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13e0435ae34-0xf3-
Lot 392 1/4 Round Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for 1" qtr round moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 393 Frame Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for secorative face frame or cabinet door face moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 394 Bed Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative crown or bed moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with n6gonr.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13e044872e3-0xfc-
Lot 396 Lip Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative panel or lip moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 397 Base Cap Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative base cap moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13e04487328-0xfb-
Lot 398 Crown Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative crown moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 399 Full Round Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative 2 3/8 full round moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 400 Panel 2 Up Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative 2 at a time panel moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Leuco Shaper Head---Model 164944---Set up for Raised Panel Doors--SEE PICS BELOW
Scroll down to see all the information on the item. We take many pictures of the labels. Condition, size, so that you know what you are getting and so that you can research more before you purchase. We respond to emails within 24 hours if you have a question. Needs new carbide inserts inkfrog terapeak.
Lot 373 Profile Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 374 Edge Profile Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for eased edge 13/16" moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 377 Cap Profile Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for cap profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 378 Applied Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for applied profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Delta/ Rockwell Shaper cutter # D-108, HSS, 1/2" bore ! Rare, NOS, Vintage
Delta/Rockwell Shaper cutter# D-108. Cutter has 1/2" bore and is HSS. Vintage! Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13e045975d0-0xf5-
Lot 379 Cornice Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for cornice profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 380 Door Profile Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for cope and stock or mitered door sticking moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
LRH Raised Panel Shaper Cutter K1038 5-1/2" Diameter 1-1/4" Bore
This listing is for an LRH raised panel shaper cutter. Model K1038. The cutter is 5-1/2" in diameter, is 5/8" thick and has a 1-1/4" bore diameter. Cutter is in good condition with no major chips or"dings" Please note that the name"Pete" has been engraved into the back. Our business. Psmsolutions2, is a sister company of psmsolutions and pleasantstmachinery. Both accounts have been in use for years with excellent seller ratings. Please refer to those accounts for a more accurate representation of our dedicated commitment to customer satisfaction. We welcome any questions that you may have prior to bidding. Feel free to send us a message or contact Steve Nelson via phone at 815-758-6534 during normal business hours. We will respond to your phone calls as soon as possible. PLEASE READ THE FOLLOWING VERY CAREFULLY: ... moreFees: An 8.5% State of Illinois sales tax is charged for all winning bidders that are Illinois residents except for those that have a state tax ID. A $35.00 palletizing fee is required for each pallet used on LTL truck shipments The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction. If 30 days have passed since the item was paid for. The item will be considered abandoned and the winning bidder is deemed to have forfeited all monies paid to the seller. The item will then be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Items Requiring Freight Shipment: All items are shipped F.O.B. from Dekalb. IL 60115. Many of our customers have used the following trucking/freight companies for their ship
Lot 382 Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for casing 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 383 Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for edge or back 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 385 Cap Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative panel moulding 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 386 Cap Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for cap or rail moulding 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 388 Crown Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for crown moulding 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e04597721-0xfc-
Lot 389 Base Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for base moulding minimal signs of use 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 391 Panel Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for panel moulding 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
PRATT & WHITNEY INSTRUCTION BOOK FOR 12" VERTICAL SHAPER MODEL B
2 COPIES OF THE PRATT& WHITNEY INSTRUCTION BOOK FOR 12" VERTICAL SHAPER MODEL B FOR CINCINNATI MILACRON. ONE COPY IS JUST INSTRUCTION BOOK THE OTHER HAS ADDITIONAL INFORMATION INCLUDING SAFETY PRECAUTIONS.
Delta Rockwell 43-340 Shaper Router Fence 3 PHASE, 1 TABLE WING ONLY
NOTE THIS UNIT SHIPS WITH ONLY ONE CAST IRON EXTENSION WING FOR THE TABLE. TWO ARE PICTURED BUT IT SHIPS WITH ONLY ONE NICE ROCKWELL 43-340 SHAPER. WITH ONE TABLE EXTENSION WING, AND FENCE. WORKS GREAT. 3 PHASE 230V 013-04-11-MIHN PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ... moreANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid licen
Lot 357 Handrail Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative handrail or casing moulding.5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 359 Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for rabbet cutting for general use or making t-astragals.5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 360 Astragal Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for general use or making t-astragals.5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 361 Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for gang stop production 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 362 Crown Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for crown moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 363 Dado Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for dado moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 364 Cove Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for cove moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with n6gonr.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13e046fddb1-0xf4-
Lot 367 Door Profile Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for door profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13e046fdd49-0xf3-
Lot 368 Panel Profile Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for panel profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 369 Pilaster Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 370 Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative profile casing 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 371 Astragal Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative profile astragal 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 372 Bullnose Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for bull nose moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Comeq Euring CM 2000 Pipe Roller Shaper
Comeq Euring CM 2000 Pipe Roller Shaper MARKDOWN! Was: $4500 Now: $3499 Comeq Euring CM 2000 Pipe Roller Shaper Comeq Euring CM 2000 Pipe Roller Shaper Machining Equipment and Tools Used Americor Comeq Euring Model CM 2000 Pipe Roller Shaper USED. MEMA651000702 Comeq Euring CM 2000 Pipe Roller Shaper. Buy It Now Manufacturer, Comeq Euring, Type, Machining Equipment and Tools, Item Condition, Used, Material, Serial# CM 2000 TOP 2, V/H, SKU, MEMA651000702, Type, Pipe Roller Shaper, Buy It Now All items sold are shipped from our Baton Rouge. LA location unless otherwise specified. Actual shipping/freight cost is calculated based on your location. We sell unique items and understand that each customer's shipping needs vary. Shipping/freight details will be determined at the time of purchase and verified with the customer before delivery. ... moreFor the purpose of obtaining a shipping estimate. Our zip code here is 70815. Buyer pays all shipping cost. All items are sold“AS-IS. WHERE-IS” Items are described to the best of our knowledge. However, we the Seller make no guarantees regarding accuracy, errors or omissions in the item description and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability for a particular purpose of any item. Payment must be made within 5 days of the sale close date. We accept Pay Pal. Visa, MasterCard and Wire Transfers. 1-877-658-8218 Universal Industrial Assets 11150 S. Choctaw Drive Baton Rouge. LA 70815 Phone: 1-877-658-8218 Universal Industrial Assets is a full service solutions provider offering a range of capabilities that include buying. Selling, consignment, online and sealed bid auctions, as well as complete asset recovery programs. Centrally located in Baton Rouge. LA and in the heart of America’s chemical corridor we have over 40,000 square feet of covered warehouse space with much
Wood shaper molder blades, knives, 15 sets of 2 each (Br)
These blades are cut on 3/16" and have widths of 3/4" to 2" Priority Mail. California buyer pays 9% tax.
Wood shaper cutter, 1" bore, bevel
Diameter 4" Blade height 5/8. carbide excellent. Priority Mail. California buyer pays 9% tax.
Radius Shaper
im not sure how to discribe this but all i see is it has written 1 1/8 full radius and 5" radius on the wood box. No logo on the metal except for the this J31162 that ingrave on it. This one is very sharp on the edge, previous owner says he bought it for over $250 i have no idea.
Unitronix HD 10HP Shaper
Unitronix HD 10Hp Shaper, Model DFDA-4, Baldor 10Hp 230v 3ph motor, 4.000-6,000-8,000-10,000 rpm speeds, Cast iron table. Base and fence, Pedestal control module, 5" capacity under nut, Foot brake, Spindle lock, Extended table and support on table front for free hand. Curved work
Powermatic Model 26 Spindle Shaper with 5 HP Motor and 4-Roll Delta Power Feed
Machine For Sale Powermatic Model 26 Spindle Shaper with 5 HP Motor and 4-Roll Delta Power Feed Stock# 54017 Condition: Used Tested: Tested Brand: Powermatic Model: 26 Serial: 8626165 Year: N/A Weight: N/A Shipping Dimensions: N/A Additional Details: Powermatic Model 26 Spindle Shaper with 1” dia. X 4 ½” long threaded spindle. 5HP, 208/230/460 volt, 3PH motor, 2-speed pulley, magnetic starter, reversing switch, adj. fence, guard and 4” dia. dust chute. Also incl. 4-roll Delta Universal Power Feed with stand and fladder. 25-KW, 4” dia. X 6” dia. spindle sander. 28” x 30” cast table, machine wired for 230/60/3. Cord and plug SN: 8626165 If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. alt=" border="5" ... morealt=" border="5" alt=" border="5" alt=" border="5" alt=" border="5" alt=" border="5" alt=" border="5" Please Read Before Buying Item* Preliminary specifications are subject to verification and should be used as a guide only. The Equipment Hub. LLC cannot guarantee the accuracy of the specifications and/or description given of the condition of machine Terms Of Sale Seller is selling the assets set forth on an as is. Where is basis and seller disclaims all warranties, representations and guarantees whether expressed or implied. Seller makes no representation or warranty as to the operability, merchantability or fitness for any particular purpose. The buyer is always responsible for verifying the condition and operational functions. Upon reasonable notice to The Equipment Hub the purchaser shall have the right to inspect the equipment prior to purchase. Payment Information All Payments are to be made in United States dollars. We accept Visa. Master Card, Discover, Paypal, Bank Wire Transfers and Checks. Payment in full must be received prior to shipping. If payment is not received within 7 days
Grizzly shaper
Grizzly 1026 3 hp shaper 220v single phase. 1/2 3/4 and 1" spindle. Will accept 1/2 router bits. Works great. Plenty of power. Way to big for what I need. Very heavy. New 40' cord. Looking to get a smaller shaper. Local pickup or buyers responsibility for freight. I will answer questions in a timely manner. Thanks for looking.
Perske P-624 Finger Jointer End Match Shaper
Perske P-624 Finger Jointer For Additional Information Just Ask! I Don't know enough to describe. This is a used item and is being sold as-is. We can load onto your truck or help arrange shipping at your cost. Our facility has a loading dock or can ground load onto flat-bed. Our ship-from zip code is 38063. If you have any questions please call Will at 731.221.1065. Thanks!
Festo Double Spindle Shaper with Festo Power Feed
Festo Double Spindle Shaper with Festo Power Feed. I have used this machine as a single spindle shaper. I do not have the second spindle. It is a 3/4" spindle machine. It would be about 4"6" between spindles if both were used. The power feed is 2 speed 1 HP. It couold use new roller rubber. The main motor is 3HP This is a 3 Phase machine. The table measures 19" x27.5" It has an integral cast base. I was made in Western Germany and is a very nice machine. I will help with loading if buyer wants to ship the item. I will crate it for a fee. Contact me with any questions via ebay or call 610-449-1218. I will combine shipping on multiple orders.
SCMI T-110 shaper
Runs well 3/4" 1" 1&1/4" spindles and wrench included
RockwellHeavy Duty Wood Shaper
Rockwell Heavy Duty Shaper Model# 43-350 comes with 26 cutter heads. Retired from municipal service with very little use. I was told it was used maybe a dozen times. Needs fencing. $1200 or best offer. Available for local pickup in NY/NJ metro area may deliver for the right price.
METAL SHAPER or PLANER or BORING MILL CUTTING TOOLS hss bits OK TOOL CO size G
lot of 23 HSS cutting bits- some are new OK Tool Co. USA size G various shapes as pictured please check my other auctions and happy bidding! FREE FAST SHIPPING ANYWHERE IN THE USA Powered by The free listing tool. List your items fast and easy and manage your active items.
POWERMATIC 26 SHAPER CUTTER GUARD
Powermatic 26 shaper cutter guard. Item used in good condition missing wheel. See pictures for details. Please check out my other auctions. `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13e0b36f808-0xef-
TOOL SURFACE GRINDER GREAT FOR LATHE MILL SHAPER TOOLING OR ALL AROUND MACHINIST
UP FOR GRABS IS A HIGH PRECISION MURAHASHI GRINDER 110 VOLT PRECISION SPINDLE AND BEARINGS ANTI BACK LASH ADJUSTMENTS AT HANDLE ELEVATING COULMN THAT ROTATES WIT VERNIER FOR QUICK SET UP SWIVEL BASE TABLE FOR ANGULAR WORK COMES EQUIPPED AS PICTURED I REMOVED THIS FROM A SCHOOL MACHINE DOES FUNCTION AS IT SHOULD IDLER BELT PULLEY NEEDS ADJUSTING MACHINE COULD USE SOME CLEAN UP MODEL# CC- 7 THIS IS A GREAT UNIT FOR HOME OR SHOP USE TOOL GRINDING OR HARDNED SURFACE GRINDING WILL SHIP WORLD WIDE COMBINED SHIPPING AND LOCAL PICK UP ALWAYS WELCOME PLEASE SEE MY OTHER ITEMS THANKS 248 875 2089
VINTAGE ORIGINAL SOUTH BEND HOW TO RUN A SHAPER 1954 BOOK MANUAL MACHINIST
DESCRIPTION: USED. SOUTH BEND BOOKS. IT HAS 24 INFORMATION PACKED PAGES. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACH
Vintage Delta Rockwell Milwaukee unisaw or shaper PAIR of table extensions
Message to dmitchell: I couldn't answer your question because you included an email address in your message. Call me. number at bottom) $65.00 Shipping is to USA 48 states only. No charge for pick up in Vista CA 92083) This auction is for a Delta unisaw or shaper PAIR of table extensions from a vintage Delta unisaw. No chips. Cracks, or other damage. The photos below are the ones to be sold. Thanks for looking!
Vintage Delta Rockwell Milwaukee unisaw or shaper CAST-IRON BASE
Shipping to USA 48 states only. Vintage Delta Rockwell Milwaukee unisaw or shaper CAST-IRON BASE no damage. Just a little rust.
STARRETT NO. 599 PLANER AND SHAPER GAGE
VERY GOOD CONDITION. COMES WITH SCRIBE. HAS OWNERS MARKS. HAS SOME LIGHT STAINING.
WELLS INDEX MODEL 837 MILL WITH SHAPER HEAD
MILL REFURBISHED BY WELLS INDEX. FALL OF 2012, HAS NOT BEEN USED AND IS UNDER POWER FOR REVIEW BY POTENTIAL BUYER. THIS MILL WAS ORIGINALLY PURCHASED BY"NAVAL SEA SYS COMMAND' for a price of $ 20.807. REFURBISHING WORK DONE BY WELLS INDEX: RECONDITIONED HEAD. NEW DRIVE BELTS,BEARINGS IN BOTH PULLEYS,GRIND R8 SPINDLE,REPLACE BRASS SPINDLE FEED DRIVE GEAR.NEW DRAW BAR, NEW PAINT-WAYS SCRAPED AND CHROMED. TABLE GROUND-NEW LEAD SCREW NUTS. NEW X AXIS SCREW,WIPER PLATE, WAY GUARDS, BRAKE HANDLE, LOCKING PLATE- COST OF RECONDITIONING $7412.99-MILL WAS REPAINTED AND TESTED-NEW SINO 3 AXIS DRO INSTALLED. NEW X AXIS SERVO WAS INSTALLED, NEW 6 INCH VISE WAS INSTALLED-MILL ALSO HAS A BRIDGEPORT SHAPING HEAD 1/3 HP. MAX STROKE 4 INCHES, 70/420 STROKES PER MINUTE, UNIT WAS TESTED AND IS IN VERY GOOD CONDITION- MILL HAS A COOLANT PUMP AND IS PLUMBED ... moreAND READY FOR PRODUCTION GENERAL SPECIFICATIONS: 10 X 42 TABLE. SET FOR 20 INCH X AXIS TRAVEL, 15 INCH Y AXIS TRAVEL-3 3/8 DIA. QUILL. 5 INCH TRAVEL, 003/006 FEED, 3 HP VARIABLE SPEED HEAD WITH LOW 70 AND HIGH 4200 MAX-KNEE 12 INCHES PLUS TRAVEL. RAM 12 INCHES PLUS TRAVEL WILL LOAD FOR FREE. WILL DELIVERY WITHIN A 100 MILE RADIUS FOR $200. BUYER ARE RESPONSIBLE FOR SHIPPING COSTS OUTSIDE 100 MILE RADIUS. WE WILL ASSIST IN MAKING ARRANGEMENTS
Delta LD shaper spindle cartridge with pulley
Spindle Cartridge with pulley for Delta/Rockwell LD shaper The LD shaper is the small spindle shaper that uses 1/2" and 5/16" interchangeable spindles Bearings feel smooth Cartridge was removed from a working machine a year or so ago PayPal only US shipping only Please ask all questions before bidding Payment due in 3 days from end of auction or item will be relisted
Delta LD spindle shaper Lock Lever
Locking Lever for Delta/Rockwell LD Shaper Complete Locks the height of the cartridge PayPal only US shipping only Please ask all questions before bidding Payment due in 3 days from end of auction or item will be relisted
Router Shaper, Moulder Motor , Woodworking 3Ph 3400RPM
Vitor Sabadell 3 phase motor 3400 rpm 277/480volt has extended shaft for cutters off of working high production moulder Model ALF90- cutter area 6 1/2" long shaft from motor length is 9" I don't have any more info on it. No liability expressed or implied on installation or suitability for a particular use. See my feedback. And bid with confidence. Winning bidder must reply within 3 days of final bid and payment received with 7 days of final bid. TERMS: ALL non-paying bidders will be filed with ebay. All items sold as is-please see pics and ask questions, SHIPPING: Ship UPS Ground We no longer accept INTERNATIONAL bids. Please email ahead of time, if you wish to have it dropshipped to a US address, please don't bid unless you can make these arrangements. FOB point of origin, If you do not accept the above shipping terms. ... morePlease do not bid.
Vintage Delta/Rockwell Shaper Cutter Fence # 982 Rare all original !
Vintage Delta/Rockwell Shaper cutter fence. Catalog# 982. In great condition! Old model notice no plastic handles or knobs! All original parts even the fence boards. Fence is fully adjustable. Both halves adjust independently. Also adjusts endwise so opening may be made as small as required for your cutters. Will be shipped disassembled. Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
1 Firefighting 2½" NH DISCHARGE PIPE Stream Shaper Adapter
Description U p for this auction is(1) one 2½" NH Firefighting DISCHARGE PIPE Stream Shaper Adapter. Item is clean and is in good condition. Constructed with Aluminum for maximum resistance to corrosion and wear. Check my other auctions and 100% five star feedback. For more details please email or call me at(714)803-6038. If you need other related items(fire hoses. Fire nozzle all kind, fire shelter Respirator Masks. Firefighter helmet. Uniforms, Boots. etc. or if you have any questions. I'll be happy to answer them and I will combine shipping on multiple purchases. If you are not satisfied with the item you bought Within 3 days after you've received the item. I will be happy to take it back with a full refund, the S&H is not refundable. I will ship to U.S. and Canada. Payment Shipping- Customers in Alaska. Hawaii. Puerto ... moreRico will need to pay an additional $0.00 for shipping