|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$175.00 Shipping Condition: New Location: China By Series Light Positioner Is Mainly Used For Welding Of Annular Weld. The Device Can Be Fixed On The Working Table Or Specific Tooling For Clamping Workpiece ... moreWith Man ual Welding, Can Also Be Used With Welding Operation Machine To Achieve Automatic Welding, But Also For Cutting, Grinding, Assembly, Testing And Other Processes.
Buy It Now
Free Shipping Condition: New Location: India ROTARY TABLE 4" 100MM 4 SLOT TILTING. Rotary Table Horizontal & Vertical 4" / 100 mm Tilting with. Rotary Table Horizontal & Vertical 4" / 100 mm. 65 ... moremm Lathe Chuck & Back Plate for Milling Machine. Hand Wheel can be set to Zero.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Structural specifications: Product model: HT03RA100 Itinerary : 360° Table size: Φ100mm Transmission mode: worm gear (reduction ratio 1/180) Guide rail: ... morebearing Material: Aluminum-black anodized Weight: 1.7kg Resolution / Pulse: 0.01 ° (no subdivision) 0.0005° (20 subdivisions) Design resolution: 0.01°, non-MS drive; 0.0005° = 1.8", 20MS drive Rotation speed (maximum): 25° / sec Repeatability: 0.005° = 18" Absolute on-axis accuracy: 0.01° = 36" Top board beat: 15μm Recoil: 0.005° = 18" Eccentricity: 10μm Lost movement: 0.005° = 18" Parallelization: 80μm Load: 45kg Packing size: 23*13*16cm Gross weight: 2kg Package Included: 1X HT03RA100 rotating platform.
Buy It Now
Free Shipping Condition: New Location: Rohini Sector-7 S.O, India 4" (100mm) ROTARY MILLING TABLE WITH 4"(100mm) ROUND VISE. ROUND VISE 4"(100mm) SPECIFICATION. Round Vise Jaw Width: 3-1/8" (79mm). Round Vise Jaw Depth: ... more13/16" (20.5mm). Round Vise Jaw Opening: 1-9/16" (40mm).
Buy It Now
$14.27 Shipping Condition: Used Location: Houston, United States Sherline 3700Cnc4" Rotary Table W/SST57D3201 Step Motor 511
Buy It Now
Free Shipping Condition: New Location: India Horizontal and vertical turntable 4" tiltable. The back plate is drilled and countersunk to fit a range of 3" and 4" 3 or 4 slot rotary tables. Table ... moreheight 66 mm in flat position. Threaded Back Plate: 14 x 1.
Buy It Now
$5.00 Shipping Condition: New Location: China Mini size 40mm working stroke and 4X29.5mm fixing slot enable you to install it on the machine's table easily and it is ideal for mini drill press or ... moremilling machine. - 1 x Cross Sliding Table. - Sliding table maximum range: about 40mm.
Buy It Now
$24.00 Shipping Condition: Used Location: Bayonne, United States 8” IndexingRotary T-Slotted Table Wheel;. (2434) All photos are of the actual product(s) you will receive and are intended to help describe the quality ... moreand condition of the piece(s). Rotates 360-Degrees Clockwise and Counterclockwise.
Buy It Now
Free Shipping Condition: Used Location: Isanti, United States SMC MSUB7-90D Rotary Table 0.7Mpa. Smc MSUB20-90S Rotary Actuator 1Mpa.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features： Center height: 65MM Telescopic stroke: 45MM Top: use Mo-type 2 top Accessories: with axial locking wrench (pictured) Weight: 2.5KG.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Suitable for all our tapping machines. Cast iron material, good stability, high precision wear resistance, not easy to deformation, not easy to rust; ... moreThe cast iron plate adopts the scraping process to make the whole plane smooth and not scratch; Using manual scraping, the surface push the table seat workpiece is more smooth, no astringent feeling.
Buy It Now
$116.65 Shipping Condition: Used Location: Louisville, United States Yuasa 550-402 8" x 6" Tilting Table with Rotary Base - Excellent Condition. The Tooling Emporium is located in downtown Louisville KY. We have a very ... morelarge inventory of tooling. We do not have everything listed as we are always receiving new inventory.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States Carefully made of steel and aluminum. 1-year warranty on the rotary roller axis. Rotary Axis 1. Easy to install: Find the "Rotary Switch" on the back ... moreof the machine box. And plug-in. Everything is all set!
Buy It Now
Free Shipping Condition: New Location: India Turntable horizontal vertical 4 / 100mm tiltable with 70mm independent chuck back plate for milling machine. Vertical center height: 21/16 (approx. 51 ... moremm) Handwheel can be set to zero. The base is 145mm x 126mm with two 10mm mounting holes spaced 110mm apart.
Buy It Now
Free Shipping Condition: New Location: Jagadhri S.O, India Rotary Tables 3″ (Tilting). Type: Tilting. Gear Ration 36 : 1. 70 mm 4 jaws Independent Chuck along with a Back Plate + T-nuts. Back Plate is drilled ... morein a manner that it can fir both to 4 slots table.
Buy It Now
Free Shipping Condition: New Location: Jama Masjid S.O, India 3"(80 mm) Tilting Rotary Table + 50 mm Chuck Self Centering + Back Plate + T Nuts. Center Height in vertical position: 2-5/8" (66 mm approx) Hand wheel ... moreis graduated in divisions of 10 min & can be set to zero.
Buy It Now
Free Shipping Condition: New Location: Yamuna Vihar S.O, India Rotary Tables 3″ (Tilting). Type: Tilting. Gear Ration 36 : 1. · Jaw Width : 54 mm Jaw Depth: 20 mm Jaw Opening : 32 mm Height : 29 mm. · The moving jaw ... morehas V-grooves to hold Round objects. Precisely Ground on Base,Top, Jaws & Base.
Buy It Now
$19.00 Shipping Condition: New Location: Chino, United States Dividing Plates For 4- 6" Rotary Tables. Fits most 4 & 6" rotary tables. Includes plates A, B & C. Plate A - 15,16,17,18,19,20. Washers, crank, handle ... more& screws are included. AIR, POWER & HAND TOOLS.
Buy It Now
Free Shipping Condition: New Location: India Table Dia. Can be used in both horizontal & vertical position. Table Slots:4. Table Height : 2-1/16" (52mm).
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features： Center height: 65MM Telescopic stroke: 45MM Top: use Mo-type 2 top Accessories: with axial locking wrench (pictured) Weight: 2.5KG.
Buy It Now
Free Shipping Condition: New – Open box Location: Park City, United States Vertical & Horizontal Design. Excellent Precision. FOUR STARS IS LIKE NEW OR IN EXCELLENT CONDITION. OCCASIONALLY, WE MAKE A MISTAKE. THIS IS THE INFORMATION ... moreI FOUND ABOUT THIS ITEM. TWO STARS IS WELL WORN, BUT WE THINK IT WORKS.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States
Buy It Now
Condition: New Location: Saint Charles, United States DIVIDING HEAD STYLEUniversal. Features threaded spindle nose and 24 hole dividing plate with easy conversion to fast, direct indexing on numbers 2, 3, ... more4, 6, 8, 12 and 24. 3 dividing plates. Threading back plate for mounting chuck (back plate is plane back and it requires drilling & tapping 3 or 4 mounting holes depending on the lathe chuck and turning a shoulder for the recess of the lathe chuck).
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States A great combo of Tilting Rotary table (3"in 75mm & 4"in 100mm) with 4 jaws self centering chuck ( 50 & 65mm) with back plates & T-nuts. 4 Jaws Self Centering ... moreChuck M14 x 1 mounting Thread || Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it.
Buy It Now
Condition: Used Location: Houston, United States Yuasa Super Accu-dex Vertical& Horizontal Indexer. Model 550-008 10" T-Slot Rotary Table(6 slots) Also includes Yuasa 8" 3 Jaw Chuck. Dividing ... morePlates. Excellent Condition. Local Pick Up. Or buyer can arrange a freight pickup.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States The tilting rotary table can be tilted and locked from 0 - 90 degrees any angle. Ideal for machining oblique surface and holes. 6pcs clamping kit included. ... moreGraduated 360 degree around its circumference and driven by precision gear with 1:36 reduction ratio.
Buy It Now
$19.00 Shipping Condition: New Location: Chino, United States 4" Rotary Table Vise. Jaw width is 80mm. Jaw depth is 20mm. Jaw opening is 40mm. 4 mounting holes to easily attach to a rotary table. T-nut slot is 16mm. ... more4 mounting t-nuts and cap screws included.
Buy It Now
Free Shipping Condition: Used Location: Clarksville, United States Used in fantastic condition. Mounted on aluminum plate. 1 turn of the dial equals 2 degrees on the table, very precise rotation. Adjustment feels like ... morenew. 6” diameter table. Any questions I’d be happy to help! 60 day return to allow for personal inspection and free shipping with USPS Priority. Thanks for looking!
Buy It Now
$10.00 Shipping Condition: Used Location: Castleton on Hudson, United States This is an assortment of 6 Jacobs rubber flex collets that I think are used in a tapmatic tapping head but not sure? Please review pictures for sizes ... moreand to determine fit. Collets are marked , 3-4 1204, 4-5 1205, 6-7 1207, 9-10 1210, 12-13 1213, and 13-14 1214.Thanks for looking
Buy It Now
$6.71 Shipping Condition: Used Location: El Paso, United States 8.0000 x4.0000 x4.0000.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States (H/V) ROTARY TABLE WITH 4 JAW SELF CENTERING LATHE CHUCK & BACK PLATE + FIXING T-NUTS BOLTS. A great combo of Rotary table 3"in 75mm with 4 jaws self ... morecentering chuck 50mm with back plates & T-nuts. 4 Jaws Self Centering Chuck M14 x 1 mounting Thread || Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it.
Buy It Now
Free Shipping Condition: New Location: India ROUND VISE 4"(100mm) SPECIFICATION. Round Vise Jaw Width: 3-1/8" (79mm). Round Vise Jaw Depth: 13/16" (20.5mm). Rotary Tables Tilting 4″ (100 mm). Round ... moreVise Jaw Opening: 1-9/16" (40mm). Round Vise Height: 1-1/4" (33mm).
Buy It Now
Free Shipping Condition: New Location: Vasundhra S.O, India Backplate is drilled and counterbored to fit a range of 3” and 4” rotary tables with 3 Slots or a 4 Slots. Backplate Size: 80 mm.
Buy It Now
$8.75 Shipping Condition: Used Location: El Paso, United States 11.0000 x4.0000 x4.0000.
Buy It Now
$8.95 Shipping Condition: Used Location: Jasper, United States Hardinge Model HV-4, 5C Collet Indexing Head Spindle Nut OEM #HV-140-B. Good used condition with good threads & knurl. Part will function as designed.
Buy It Now
$7.83 Shipping Condition: Used Location: Lorain, United States Up for sale is aHartford 12-Stop Index Stop Plate for 8" Super Spacer Chucks. Used in good condition.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 8' Horizontal& Vertical Rotary Table We value our customers and products like we value our photos in our ad. Thank you. Descriptions: Brand New ... more8' Horizontal& vertical rotary table Table diameter: 8" Height OA horizontal: 3.94" Center height for vertical mounting: 5.91" Center Hole: 3 Morse Taper T-slot width: 465" Locating slot width: 0.630" Maximum working load: 330 lbs( horizontally) Maximum working load: 165 lbs( vertically) Designed for milling. Drilling, jig boring, and many common shop applications Low Profile 10 second vernier reading Gear drive immersed in oil Extra deep coolant channel Dual positive action locks Satin chrome dials Maximum individual spacing error 4" table 120" 6" table 80" 8, 10, 12, 16" tables 60" 4" table utilizes low profile locks for added workspace Gear ratio: 4" table is 72:1; 6-16" tables are 90:1 Flatness of clamping service-concave: 0006" Concentricity of center bore: 0008 Parallelism of clamping surface to angle face: 0008" Squareness of angle surface to clamping surface: 0004" Squareness of clamping surface to center slot: 0008" Weight: 56 lbs O verall dimension: 4-1/2'L x 18'W x 10-5/8'H Quantity: 1 We respond to ALL EMAILS. Should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email. Please check your SPAM/JUNK email folder. WE ARE CLOSED ON THE WEEKENDS. FeedBack: If you are considering leaving negative or neutral feedback. Please give us the opportunity to resolve the issue first. Thank you for your consideration Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* California residents only* sales tax will be added at check out. Shipping and Handling to Lower 48 States: FREE SHIPPING Ground S
Buy It Now
Free Shipping Condition: New Location: India 3" (75mm) Rotary Table + 3 Jaw (65mm) Self Centering Chuck + Back Plate. 3 Jaw Self Centering Chuck (65mm) Dia. M14X1 Threaded. 65mm Self Centering Chuck ... more3 Jaw. 3"(80mm) ROTARY MILLING TABLE. Rotary Table Dia.
Buy It Now
Free Shipping Condition: New Location: Jagadhri S.O, India 4" Horizontal And Vertical Precision Rotary Table With Clamping kit Premium Quality. 4 rotary table with clamping kit design. 4 rotary table with clamping ... morekit drawing. 4 rotary table with clamping kit details.
Buy It Now
Free Shipping Condition: New Location: Jagadhri S.O, India (100mm) For Milling Machine. An alternate setup is to mount the rotary table on its end (or mount it "flat" on a 90° angle plate), so that it rotates ... moreabout a horizontal axis. Simple to operate, they allow easy work handling and have many varied applications includes.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Center height: 65MM. Top:Use Mo-type 2 Top. Your satis faction is our ultimate goal. Topuse Mo-type 2 top. Feature 1Easy installation,Convenient Use,Easy ... moreOperation. Feature Creative Design，Durable Material，Beautiful Appearance.
Buy It Now
$192.37 Shipping Condition: New Location: Fullerton, United States ACER HV-10 10" Horizontal/Vertical Rotary Table Rotary Table has a Single Lock Clamp. Made in Taiwan High Quality. 6 slots available, Worm is Hardened ... moreand ground. Casting with Meehanite Casting. Very true and flat. Model HV-10 in stock. Others sizes available. Operation and Service Manual- Rotary Tables Please call us if you have any question at 714-632-9701. Info@aceronline.net You can pick up from Anaheim. California or Piscataway, New Jersey or we will ship via UPS Ground. Anaheim Office 1062 N. Kraemer Place Anaheim. CA 92806 Piscataway Office 244 N. Randolphville Road Piscataway. NJ 08854 www.aceronline.net This item might be out of stock. If it is out of stock. The lead time is approximately 6~8 weeks. Here are your options if the item is out of stock: 1. You can wait for the item to come in in the 6~8 weeks time frame. or 2. We can cancel your order and get a full refund of your money. Payment Supra Machine Tool accepts: PayPal. Visa, Master Card, American Express, Money Orders, Cashier Checks, Wire Transfer as payment of goods purchased in our store. Please send payment to 1062 N. Kraemer Place, Anaheim, CA 92806) All payments must be received within 7 business days. Bidders can call 714-632-9701 or info@aceronline.net for further information. All buyers residing in California add 8.75% sales tax. Shipping and Handling Buyer pays the Shipping charge based on UPS Ground Shipping Charges. Orders being shipped to P.O. Boxes will be delivered by United States Postal Services(USPS) Note: Weight restrictions may apply in some cases. Buyers can check for shipping rates at www.usps.gov) Orders under 150 lbs. can be shipped by U.P.S. Freight prepaid or collect. Orders above 150 lbs. will be shipped by freight carrier. Supra Machine Tool offers a group of carriers that can quote you with an estimate of shipping charges for all items. Check www.conway.com. Www.roadway.com. Estimated delivery time by UPS is from 2 to 6 business days from the time the order is processed. International buyer pays the actual
Buy It Now
$410.00 Shipping Condition: New Location: 松江区, China
Buy It Now
Free Shipping Condition: New Location: Chino, United States 80mm Rotary Axis Cnc Chuck for Laser Router Engraving Cutting Machine Tool Rotary Shaft 80 Easy to Operate / Stable Performance / Beautiful Appearance ... moreMainly Used in Laser Marking Machine, Laser Welding Machine, Laser Engraving Machine. You Can Also Mark: Cigarette Holder, Pen, Bearings, Small Hardware, Etc. Basic Information Dimensions: Chuck Size 80mm Positioning Accuracy: 0.2 Drive Mode: Stepping Function: Marking Universal Features: In Mechanical Processing, Multi-variety and Small Batch Processing Account for About 80%. in This Way, the Working Platform Not Only Requires High Precision and Production Efficiency, but Also Has "Flexibility", That Is, Flexible and Universal, and Can Quickly Adapt to the Change of the Machined Parts. the Working Platform Better So.
Buy It Now
Free Shipping Condition: Used Location: Yorktown, United States Dividing head plate, double sided.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Condition: Used Location: Cincinnati, United States 84" x 84" GIDDINGS & LEWIS T-SLOTTED "HYDROSTATIC" #29328. Serial No 040-2102-92 Model "HYDROSTATIC". HEAVY-DUTY MANUAL ROTARY TABLE. Table Working Surface, ... moreW x L 84" x 84". Base Size, D x W 78" x 84".
Buy It Now
Free Shipping Condition: New Location: Sat Nagar S.O, India Quality Tool Set of 4" Regular Rotary Table with a 70 mm 4 jaw independent Chuck with Back Plate & Tnuts. 70 mm Quality 4 Jaw Independent chuck, the body ... moreof which is made from SG Iron & Jaws are of Tool steel hardened & ground.
Buy It Now
Free Shipping Condition: New Location: India THERE ARE FOUR T-SLOTS FOR SECURING THE WORK, RIGHT-ANGLE MACHINED SURFACES FOR HORIZONTAL AND VERTICAL MOUNTING, AND 7MM SLOTS FOR SECURING TO THE MACHINE ... moreTABLE. THE INDEXING HANDLE, WHICH ROTATES ONCE FOR PER TEN DEGREES OF TABLE ROTATION, IS DIVIDED INTO DEGREES AND QUARTER DEGREES.
Buy It Now
$70.00 Shipping Condition: New Location: China 1 set Double support 5th rotary axis A+C Axis ( type number: RTM17-A50-C50). The fifth axis (C axis) reduction ratio: 50: 1 ( Nema23 waterproof two phase ... more4-wire 3A stepper motor). The fourth axis (A axis) reduction ratio: 50: 1 (Nema23 waterproof two phase 4-wire 3A stepper motor).
Buy It Now
Free Shipping Condition: Used Location: Knoxville, United States ROTARY INDEX DRIVE.
Buy It Now
Free Shipping Condition: Used Location: Spartanburg, United States MERROW 70-D3B Butt Seamer MERROW 70-D3B This is a heavy duty single needle single thread butt seamer serger. This is a good condition curved needle machine ... moreused mainly to sew rolls of material together for textile processing. Machine cuts and sews across the edge of material. Extra wide seam. Top Quality USA made industrial sewing machine that is in good mechanical condition. Clean and complete machine that is sold head only. N o table or motor included. UPS shipping $39 to the 48 contiguous US States.
Buy It Now
$89.65 Shipping Condition: Used Location: Crestline, United States Camco Rotary Indexer. 8 Position. 90 Volt DC Baldor Motor 1/3 hp. USA Sales Only. Model 601RDM8H24-270.
Buy It Now
Free Shipping Condition: Used Location: Boise, United States
Buy It Now
Free Shipping Condition: New Location: Denver, United States
Buy It Now
Free Shipping Condition: New Location: Rohini Sector-7 S.O, India Hand Wheel can be set to zero. Hand Wheel graduated in 10 min divisions.
Buy It Now
Condition: Used Location: Rochester, United States Type: Rotary Table. Table Size: 18" x 18". This table is exactly as pictured.
Buy It Now
Condition: Used Location: Indianapolis, United States i dont know much about this item. ask me anything precision ground 360 degree table nice finish micro adjusting
Buy It Now
Free Shipping Condition: New Location: Jagadhri S.O, India 65mm 3 jaw self centering chuck :-. An alternate setup is to mount the rotary table on its end (or mount it "flat" on a 90° angle plate), so that it rotates ... moreabout a horizontal axis. 3 75mm rotary table with 65mm 3 jaw self centering chuck board.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it.
|
|
|
|
2012 Haas TR-160 CNC 4th and 5th Axis Trunnion Rotary Table Brushless Servos
2012 Haas TR 160 4th and 5th Axis CNC Rotary Table Brushless Specifications: B Axis Rotary Torque. 150 ft-lbs Max Runout. 0.0005" Speeds. 0.001 to 60 deg/sec Brake Torque. 200 ft-lbs Gear Ratio. 63:1 Max Air Pressure. 120 psi Max Swing. 17.5" Max Weight On Platter. 80 lbs Platter Diameter. 6.3" Weight. 425 lbs A Axis Tilt Torque. 150 ft-lbs Speeds. 0.001 to 60 deg/sec Brake Torque. 200 ft-lbs Gear Ratio. 63:1 Max Air Pressure. 120 psi Sales contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANC
|
|
|
Palmgren 8" Rotary Table w/ 4 Jaw Chuck
This Palmgren 8" Rotary Table comes with a 4 jaw chuck. We have cleaned and checked this item. Nice Item.
|
|
|
Milichex rotary index table compound set Rare 360/96 stop precisn Ultradex type
This listing is for a set of two 12" size Milichex(Ultradex-type) precision rotary index tables produced to be a compound system by the Michigan Tool Co of Detroit. MI. This system was produced under license from A.A. Gage Co. The manufacturers of the Ultradex brand index tables. High accuracy and repeatability are characteristic of the A.A. Gage patented system. This consists of two 12" Milichex tables: One model IX-960-12. Serial F572 with 96. 3.75 degree divisions; and One model IX-3600-R-12. Serial F588 360. 1 degree divisions. These tables can bolt together to provide a compounded number of indexes. These tables can also be used separately. For freight shipment these tables will be separated from their stacked configuration as seen in the photos. EACH table weighs approximately 185 pounds. U.S. Sales and shipments only. 30 ... moreday return policy- Satisfaction assured! Manually-controlled compound sets of highly-repeatable. Positive-positioning rotary tables rarely appear on the used market. Pricing when new? this system is offered here at a small fraction of the cost of a Moore or other table systems in this precision category. MAKE AN OFFER. CONDITION: This equipment is in excellent condition. Mechanisms all operate smoothly. There are no inventory marks or engravings. If you can't come to Vermont to pick-up yourself. Then careful padding and crating for freight shipment will be provided at no charge. Logistics: U.S. Sales and shipments only. Shipping is not included. If you can't come to Brattleboro Vermont 05101 to pick up in-person. A motor freight shipment can be arranged at an additional charge. If pick-up will be by a motor freight carrier. Appropriate padding and sturdy crating will be provided at no charge. We've entered shipment details into eBay's system. Which should(should) allow you to obtain a motor freight quote at Freightquote. To get your quote. Go to the link on this page at the shipping section of this eBay listing. If you have problems getting a freight quote. Please
|
|
|
SMC MSQB20A 145-PSI Rotary Actuator Table Cylinder w/(2) D-F9PV Auto-Switches
Questions? Call us: 1-877-328-9236. SMC MSQB20A 145-PSI Rotary Actuator Table Cylinder w/2) D-F9PV Auto-Switches. Manufacturer: SMC Model: MSQB20A Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: SMC Condition: Used. Comes in on original packaging. Actuator is in good cosmetic condition. Notes: Actuator was removed from a working setup. The unit's table turns easily. No further testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) SMC MSQB20A Rotary Actuator Table Cylinder, 2) SMC D-F9PV Auto-Switches, Specifications: Manufacturer: SMC, Model: MSQB20A, Rotary Actuator Table, Pneumatic Air, Pressure: 1.0MPa 145PSI, External Shock Absorber's, 8) Hex Screws, 2) D-F9PV Auto-Switches, Qty. 1, SKU: O47Y002 For questions regarding ... morethis item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be p
|
|
|
Universal Tailstock 8" 10" Rotary Table Dividing Head Milling Machine Machinist
Adjustable 8" to 10" tailstock by Dayton. Actual item pictured. Can be used with rotary tables. Dividing heads, indexing jigs, bench centers, etc.
|
|
|
Mazak VQC 20/50B VMC 4 Axis W/ Tsudakoma Rotary Table & Sony Scales on XYZ
Up for sale is a Mazak VQC 20/50B 4 Axis vertical milling center. Cat 50 spindle 3100 RPM coolant chip conveyor and Sony magna scales on xyz axis. Machine runs good. If you would like more info or setup a viewing I could be reached at 7082882678. No tooling is included. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14ad520e94c-0x10f-
|
|
|
Phase II 6" horizontal/vertical Rotary Table w/ (3) index plates & handle
offering one 6" Phase II horizontal/vertical Rotary table with(3) index plates. Handle and sector. Rotary table has some marks in the center of the table, but is still very functional. comes with three index plates sector and the indexing handle.
|
|
|
Phase II adjustable Tailstock ( 6") for" Rotary table or dividing heads"
offering one used Phase II 6 inch Adjustable tailstock in very nice condition.
|
|
|
UP TO 2 SMC AIR ROTARY TABLE ACTUATORS MSQB50A W/SENSORS
This is for up to 2 Nice SMC Rack and Pinion Type angle Adjustable Rotary Table Air Actuators with Adjustment Bolt and 2 end of stroke sensors. No. MSQ. Each Bid is for ONE Actuator. The MSQ compact rotary table is ideal for material transfer applications. It incorporates load bearings and a mounting face with a rack-and-pinion style rotary actuator. Compact rotary table with Low Table Height Pivoting angle adjustment range: 0 to 190 Degrees Rotary Table diameter- 3" Cylinder bore size- 50mm Easy mounting of workpiece This rotary actuator can be used for many uses including transferring. Clamping, bending, turning, screwing and camming applications, etc. For more Information see: http:content.smcetech.com/pdf/msq.pdf Overall length of block is 6" I will fully guarantee this very expensive item. Shipping in the Continental US is ... more$9.90- I have very competitive rates for our always welcomed International bidders. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by SixBit's eCommerce Solution
|
|
|
Index Vertical Milling Machine Model 40 & Rotary Table Indexer - PICK UP ONLY
INDEX VERTICAL MILLING MACHINE THOMASON(MODEL#40) ROTARY TABLE INDEXER These items are part of large storage sale. All items are being sold"As Is" Check my other listings throughout the next(14) days for all items being auctioned. If you would like to purchase more of my items. I will store the items won up until January 30th, 2015 as long as payment has been received at the end of each auction for the items won. This will make it more convenient for those who need to pick up more than one item. PICK UP ONLY- Happy Bidding-
|
|
|
Illinois Precision 25 Ton Vertical Injection Molder 22 mm Screw w/ Rotary table
For Sale is a late 1990's Illinois Preceision 25 ton Vertical injection molding machine with a 22 mm screw. This is a rotary table with variable shot size. The machine is in excellent working order with less than 2.000 hrs Local pick up in Chicago land area. Please feel free to call Mark with any questions 909-322-1311
|
|
|
Haas Servo Control 17 Pin CNC Brush Rotary Table Indexer HRT-210 HRT-160 HA5C
Haas Servo Control 17 Pin CNC Brush Rotary Table Indexer HRT-210 HRT-160 HA5C This servo control is in excellent operating condition and very good cosmetic condition. The display is clear. The photos have a few reflections. These are not defects.There are a few very minor scratches on the red powdercoat. I can send you additional photos if you like. It was original equipment for an HRT-160. However the control will be shipped with the parameters unlocked, which will enable the user to configure it for any of the other 17 pin brush rotary products from Haas. These controls are fully tested just prior to shipment. DOA is not possible. However. You may test it for yourself at your risk. If you would like to return the control( Let's say it does not solve your problem) the return must be initiated within 14 days from the date of sale, and ... morereceived within 21 days from the date of sale. This is a conditional right of return. Which is not to be confused with a warranty. The conditions are: Control must be in the same condition as shipped. Working. No damage, No tampering, No disassembly etc. If you break or damage the control during testing, you are responsible for the damage. Sound fair? I can ship this Economy to the Continental USA for free. Alaska and Hawaii will be at an additional expense. No International sales or shipping. PayPal only. See above for return policy. California sales tax will be applied to qualifying transactions.
|
|
|
Yuasa TPDX-5CA Programmable Rotary Table w UDNC-100 Control
THIS ITEM IS OWNED BY AND LOCATED AT MACHINESUSED.COM. 2410 Niagara Lane, Plymouth, MN 55447- CONTACT US TO DISCUSS THE MACHINE AND TO ARRANGE INSPECTION OR PURCHASE AT 763-745-1166 OR EMAIL US. Yuasa TPDX-5CA Programmable Rotary Table w UDNC-100 Control Manufacturer: Yuasa Model# TPDX-5CA Specification: Faceplate Diameter 5C Collet Closer(Pneumatic Close) Center Height 4.5" Hole Thru Spindle 1-1/16" Collet Capacity Resolution(Deg. 001 Degree Equipped With: UDNC-100 Programmable Control Unit. Interface Cables, 5C Pneumatic Collet Closer, RS232 Port. Vertical or Horizontal Mounting Capacity Electrics: 110 Volt. Single Phase
|
|
|
Tsudakoma 12.6 inch RNCM-301R 4th axis power rotary table
Two Tsudakoma 12.6" RNCM-301R 4th axis power rotary tables. Dims. Length=24" Width=9" Height=22" Weight=500 lbs. a piece
|
|
|
Nikken cnc400vf 16 inch 4th-axis power rotary table
Nikken 16" cnc 400-vf 4th axis power rotary table. Made in 1984. Used on our Fadals. Dims. Length=30" Width=10" Heigth=22" Weight=500 lbs. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14ae93c9019-0x106-
|
|
|
Used Mastercraft Tools 800R 9 inch Rotary Table Machinist Mill
For sale is a used as is. Vintage Mastercraft Tools 9" rotary table, Model 800R in good condition You will need to do your research for fitment compatibility. There is no question that is dumb. So we encourage you to ask any you may have before you choose to Bid, Offer, or Buy It Now. We will try our best to get you an answer in a timely manner. Photos are of actual item, all sales are final.
|
|
|
WALTER RT250TG 10" ROTARY TABLE W/DIVIDING HEAD CAPABILITY MILLING ***VGC***
WALTER RT250TG 10" ROTARY TABLE W/DIVIDING HEAD CAPABILITY MILLING*VGC* WALTER 250mm ROTARY TABLE RT250TG. VERY GOOD CONDITION AS SHOWN* TABLE MISSING CRANK HANDLE AND HARDWARE TO USE AS DIVIDING HEAD. HANDLE INCLUDED FITS BUT NOT WALTER. SHIPS FREIGHT $75 CRATE CHARGE IN ADDITION TO ACTUAL FREIGHT CHARGES. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Freight- Check item description or contact seller for details. Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
6" ROTARY TABLE MILLING ROTAB HORIZONTAL
6" ROTARY TABLE MILLING ROTAB HORIZONTAL, 6" ROTARY TABLE MFG? TABLE CHIPPED OUT AS SHOWN. HAND WHEEL CRANK IS ROUGH. NO RETURNS AS IS* QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14aecaa6248-0x115-
|
|
|
Weiss TC120Fixed Rotary Indexing Table 120mm with Fischer D Motor TC0120X
Weiss TC0120X TC120 Fixed Rotory Indexing Table 120mm with Fischer D Motor. Rotating table diameter: 120 mm Fisher D motor Type: 500-568141101 Fischer D motor power ratings: 50 Hz: 230/ 400 VAC. 0.64/ 0.37 Amps, 0.04 kW, 622 RPM Fischer D motor power ratings: 60 Hz: 277/ 480 VAC. 0.53/ 0.32 Amps, 750 RPM Bremese: BFK 457-04 24 VDC SKU 48386
|
|
|
XY AND ROTARY TABLE TR46BL
XY AND ROTARY TABLE TR46BL STROKE: 5MM WIDTH:57.90MM HEIGHT: 95.29MM Used: An item that has been used previously. The item may have some signs of cosmetic wear. But is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. OUR SURPLUS Item will be ship via economy shipping. Delivery take about 2 to 5 working days to most countries or urgent shipment via FEDEX, UPS,OR DHL +++Please read the Terms& Condition before purchase+++ ACCESSORIES Any accessories. Manuals, cable and etc that are not in the picture listing or mention, it is NOT INCLUDED. INTERNATIONAL BUYER Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please ... morecheck with your country's customs office to determine what these additional costs will be prior to bidding or buying WARRANTY Our warranty is valid for 14 days after initial receipt of item. PAYMENT TERMS PAYPAL. WIRE TRANSFER TT or Contact Us RETURN POLICY-For item condition not as described. Defective. Please report to us for replacement or refund within 14 days of receipt. Returns must be in their original condition and include all shipped accessories. Shipping fees will NOT be credited for returns and ALL RETURN SHIPPING COSTS ARE THE RESPONSIBILITY OF BUYER. All items will ship with our warranty label. If any stickers have been removed or tampered. Your refund will be canceled.
|
|
|
ADVANCE Cross Slide ROTARY TABLE, Operator's Manual & Parts List, Instructions
This is an ORIGINAL BOOK/BOOKLET. NOT a Photocopy. ADVANCE CROSS-SLIDE ROTARY TABLE Model A-11 Operator's Manual and Parts List 9 pages including fold out drawings. Pages are in very good condition. Not dirty. Bent, folded or torn. Dark blue paper cover, 3 ring type. Includes: Uncrating. Moving and Lifting, Lubrication, Dial Adjustment, Worm Gear Adjustment, Center Bearing Adjustment, Parts Lists, Parts Drawing, Cross Section Assembly Drawing. Again- this an original manual as supplied with a machine. Not a photocopy of a manual.
|
|
|
MACHINIST LATHE MILL 8" 3 Axis Rotary Table for Milling Machine
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. The wheels appear to have been painted. I think it is either Palmgren or Craftsman. Turns ok. May need some oiling. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will ... morecombine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL
|
|
|
U.S.A.! INDEX 12" ROTARY TABLE FOR MILLING MACHINE
We Have 1.000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us@ 909.919.9600! NL Condition: Excellent Specifications: Table Diameter: 12" Center Hole: 1/2" Indexing Range: 0-360 Degrees. Dial Reading: 0-60-0. Mounting Holes: 5/8" Mounting Holes Center to Center Distance: 15" Weight: 90 lbs. Comes as shown in pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive a 30% discount per item. This Only Applies To Tooling Items with a Total Gross Weight of Under 100 Lbs. Machines are Not Included in this Offer. This Will be Final on ... moreAll Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
UNIVERSAL TAILSTOCK 1-1/2" TO 8-1/2" DUAL CENTERS 10 DEGREE SWIVEL ROTARY TABLE
Nice dual center swivel tailstock
|
|
|
Phase II 12"Horizontal Rotary Table, Size: 12", 220-012, 65-220-012
Phase II 12"Horizontal Rotary Table. Size: 12" 220-012, 65-220-012 What you see in the photos is what you will receive. Use for indexing. Drilling or milling. Machining curved surfaces by utilizing circular milling. Milling and boring where close tolerances are required. Machining flat surface is set at a certain angle to a given reference. Quality control. Jig boring. Adjustable satin chrome dials are extremely large in diameter for easy reading. All dials are precision ground and graduated in minute and second increments as well as degrees. Totally enclosed rugged base casting. Precision ground and parallel within.0006" 2) Locks provided for positive action. The worm and shaft are of one piece hardened and ground. All rotary tables are equipped with disengageable worms which affords quick rotation for indicating workpieces. ... moreOiling facilities are provided for all moving parts. Low profile. Turntable Made of"high grade meehanite castings" Precision ground and parallel within.0006" All T-Slots are machined. Graduations are accurately cut in increments of one degree. Optional Accessories Dividing plates have all divisions from 2 to 66 and all numbers from 68 to 132 that can be divided by 2. 3 and 5. Fits all except 6" Second vernier: 10" Gear ratio: 90:1, Adjustable tailstocks: 2 MT, We sell high-quality industrial surplus at discounted prices. While we take every effort to inspect and test each item we sell. We do not have the capability to fully evaluate many of the items we sell. All items are sold as is with no warranty(unless otherwise specified) and are non-returnable. If you don’t see the answer you are looking for in our description or photos. PLEASE ask before purchasing.
|
|
|
Vintage Candlestick Bakelite Chrome Rotary Telephone Table Accent Lamp
Description: Vintage Candlestick phone converted to a table lamp. Black bakelite and chrome construction. Wired for a lamp with push switch on the socket. It is an unusual chrome model here. I have not identified it, and these are not our forte. Measurements: phone is approx. 11 1/2" tall. approx. 22" tall to the top of the lamp finial. Condition: Very Good Vintage Condition! light wear throughout to the chrome and Bakelite. It is wired for light. Just needs a plug. For more information about condition. Please read our Seller's Policy below. Seller's Policy: Your Satisfaction is Guaranteed! If you are not satisfied with your purchase. Simply notify us within 5 days of delivery, and we grant you a total refund of your bid price. Any returns must be in the exact same condition as received. You are responsible for all shipping, ... morehandling and insurance costs, including any return shipping costs. If you are unsure of any information provided here, or require additional information, please email us prior to bidding. All information pertaining to age. Condition, or origin are Approximations. ALL items are used, second-hand, or antique; and as such, have more Minor condition issues than pictured or described. Even items that are described as"Excellent Condition" typically will show Some signs of wear and/or use. Unless expressly stated, None of our items are in"New" or"Mint" condition. SHIPPING: Typically. We will ship within 3-5 business days of your payment. If you make your payment on the weekend or holiday, we begin processing your purchase on the following business day. We pride ourselves on professionally packing your item for safe arrival. Large and/or very fragile items may take longer, but understand we are providing the care and attention needed to assure your item's safe arrival. If you have any questions about your purchase, email us. INTERNATIONAL BIDDERS: We WELCOME International Bidders. Please email us for international shipping costs. Import duties. Taxe
|
|
|
TAILSTOCK FOR 6-1/2" ROTARY TABLE DIVIDING HEAD, BENCH CENTERS
TAILSTOCK FOR 6-1/2" ROTARY TABLE DIVIDING HEAD. BENCH CENTERS. 3-1/4" FROM CENTER TO BASE. UNIT IS IN GREAT CONDITION.
|
|
|
Rigid / Phoenix 4 Head 4th & 5th Axis CNC Tilting Rotary Table, Modular Build
Title: Rigid/ Phoenix 4 Head 4th& 5th Axis CNC Tilting Rotary Table. Modular Build Description: Our Internal Stock# 11-16-14 dale) You are about to purchase the following item: 1- Rigid/ Phoenix 4 Head 4th& 5th Axis CNC Tilting Rotary Table. Modular Build Catalog# Unknown This is a 4 Unit Tilting Rotary Table. This is a Modular Unit. You can add or take away unit. They Bolt Together. Ea. Unit is 11" Wide(approx. 7-1/2" Dia. Ea. Table Slightly Raised. 9-3/4" Dia. of entire face of Rotary table) 4-3/4" Hole in center of Each Section 11-1/2" Approx. From CC's of Spindles to Base OVERALL DIMENSIONS: 56" Deep w/ Servo Motor 95" Long w/ Gearbox attached. That does not include the length of the Servo Motor. Gear Box for Table Rotation on End is Not attached in Pictures of Main Unit. There is a picture ... moreof it as it sits in a box separate. This Unit Came off a Rigid/ Phoenix CNC Vertical Machining Center. Machine was Rebuilt/ Retrofitted by Phoenix around 2000. Originally RIGID 4-Spindle. 5-Axis CNC Milling Machine. Type# NB-125 Special. NO SERVO MOTORS OR AMPLIFIERS This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition. Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost
|
|
|
Palmgren 8" 3 Axis Rotary Slide Table Great Shape
Very nice palmgren rotary table. Moves in 3 directions. Very smooth and clean See pics
|
|
|
rotary table 6 in top japan mfg low profile
6 in dia.Very low 3 in height, in very good condt made in japan top quality much better than any phase II, light weight with a bolt on/ removeable larger tapped top plate/ table, uses 3/8 tee slots and studs, great locking clamps for table
|
|
|
Troyke Rotary Table 14"
Hello prospective customer! You are looking at a sale of a Troyke 14" Rotary Table. The rotary table in the photographs is exactly what you will be receiving. Item will be shipped either same day or in 1 business day after purchase is paid for. Item will be shipped freight via Old Dominion. If you have any questions. Please let me know and I will try to answer them. Thank you for looking and have a great day!
|
|
|
Troyke U-12 12" Horizontal / Vertical Rotary Table Machinists Milling Indexed
Nice working Troyke U-12 12" vertical/horizontal rotary table as shown. All functions appear to work as they should. No shipping on this. Local pickup only, Palatine, IL. will take PayPal but cash in person is preferred. Weighs about 145 pounds. See pics. Ask any questions. Thanks for Looking! +++Check out my other items!+++
|
|
|
Motion Index Drives EDA 560/0344/4 Rotary Table Indexer w/ 460VAC Motor & Brake
Motion Index Drives EDA 560/0344/4 Rotary Table Indexer w/ 460VAC Motor& Brake From our inventory we are selling a Motion Index Drives EDA 560/0344/4 Rotary Table Indexer w/ 460VAC Motor& Brake. Specifications: Model# EDA 560/0344/4. KAF67 DT90S4/BMG/HR/TF More Information: Gear Motor: SEW KAF67 DT90S4/BMG/HR/TF Voltage: 230/460VAC Amperage: 5.2/2.6A Phase: 3 Input RPM: 1730 RPM Output RPM: 25 RPM Rating: 1.1kW Brake: 460VAC Oil: CLP 220 Mineral Oil, Indexer: EDA 560/0344/4 Table Diameter: 22" Number of Positions: 4, Bay 3 SKU# SB-081353 775 lbs Next Day Automation focuses strongly on quality of items that we sell. That’s why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. We will not sell any item that we feel is below a 7 on our rating system. Because of our ... morelimit on lower quality items, you will not find items damaged beyond repair. If you have any questions. Feel free to contact us. Shipping Weight: 775 lbs Payment Types Our preferred payment option is PayPal. However. You can use a Credit Card through PayPal as a“one time payment” Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from Next Day Automation. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. Next Day Automation. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Messaging: Contact us though ebay messages. Address: Next Day Automation 9472 Hemlock Lane N
|
|
|
6" Hofmann Rotary Indexing Table
Hofmann(Made in Germany) Rotary Indexing Table. Selling off some machine shop equipment from my dads old shop. Thank you. Joe
|
|
|
8" PALMGREEN ROTARY TABLE
Used but in good working condition. 8" locking rotary table. Overall length is 12" X 12.5" wide.
|
|
|
NICE! BRIDGEPORT 12" ROTARY TABLE FOR MILLING MACHINE
BRIDGEPORT 12" ROTARY TABLE FOR MILLING MACHINE ROTARY ACTION IS EXTREMELY SMOOTH ON TABLE. THIS TABLE WAS VERY LIGHTLY USED AND SHOWS LITTLE TO NO SIGN OF WEAR. SERIAL# 18851 OWN A PIECE OF HISTORY! THIS ITEM WAS ORIGINALLY OWNED AND USED BY MASTER CRAFTSMAN CAL WILLIAMSON OF EL CAJON. CALIFORNIA. MR.WILLIAMSON WAS RESPONSIBLE FOR THE ORIGINAL SRAM BICYCLE GRIPSHIFT PROTOTYPE DESIGN THAT HAS BECOME THE STANDARD ON TODAYS BICYCLES. MR.WILLIAMSON CONTRIBUTED HIS EXPERTISE TO MANY EXCITING PROJECTS OVER THE YEARS INCLUDING FABRICATING ENGINES. BOATS, CARS, BICYCLES, AIR PLANES, AND MUCH MORE! IF YOU HAVE QUESTIONS ON THIS ITEM OR HAVE A SPECIFIC NEED FOR A MACHINE OR MACHINE TOOL ACCESSORY. PLEASE CALL US AT 858-754-8321.
|
|
|
NIKKEN ROTARY TABLE, MODEL CNC-250-LF, TAILSTOCK, 4TH AXIS DRIVE, 8" 3-JAW CHUCK
WISCONSIN METALWORKING MACHINERY FOR MORE PHOTOS AND INFO VISIT ID#9657 Specifications: GENERAL SPECIFICATIONS: MAKE. NIKKEN MODEL. CNC-250-LF SERIAL NUMBER. 2419 AGE(YEAR) 1993 TABLE SIZE. 9.75" 250 MM) ROTATION SPEED. 16.6 RPM DIAMETER SPINDLE. 60 X 52 MM TOTAL REDUCTION RATIO. 1:120 WEIGHT. 45 LBS(20 KG) EQUIPPED WITH: 8" 3-JAW CHUCK TAILSTOCK 4TH AXIS DRIVE CONNECTION CABLES SPECIFICATIONS SUBJECT TO VERIFICATION CONDITIONS OF SALE TERMS: Cash or check with order. Unless otherwise stated. WARRANTY: The goods described herein are pre-owned used goods and are offered"as is" where is" unless otherwise noted herein, SELLER MAKES NO WARRANTIES OF ANY KIND WHATEVER, EXPRESSED OR IMPLIED, OR MERCHANT-ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. All specifications and description of said goods are approximate only. It ... moreis the Buyers responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods conform to Buyer's requirements. MACHINE USE AND SAFETY: Buyer acknowledges that the goods described herein are preowned used GOODS WHICH WERE NEITHER DESIGNED NOR MANUFACTURED BY THE seller. Nor has the Seller knowledge of, or control over the prior use or misuse of said goods, nor does the Seller have knowledge or control over the future application of these goods by the Buyer. It is the Buyer's(user's) responsibility to provide proper safety devices, equipment and instructions for any particular use and to take all necessary steps to conform to all federal, state or local government safety standards including OSHA. INDEMNIFICATION: Buyer agrees to indemnify. Hold harmless and defend Seller of and from any and all claims, liabilities and damages from any accidents or other
|
|
|
(1) Engelhard Rotary Brazing Table - Used - AM13597
1) ENGELHARD Automatic Rotary Brazing Table Station– Used– AM13597 Capabilities: Brazing alloy to join two or more close fitting parts together. Alloys are heated to their melting point and distributed between the parts to join them metallurgically. Specifications: Natural Gas Fired 10 Stations Includes: Fully Integrated Controls Fume Hood Heavy Duty Support Platform Integrated Wire Feeder…Dust Extraction…Fabricating Machinery…Sawing& Cutoff…Tube& Pipe… This item is on our floor available immediately. Subject to prior sale* Ask as to shipping options* DISCOUNTED PRICE | A S PICTURED | FOB CLEVELAND. OHIO If Necessary. Palletizing Fee Not To Exceed $250.00 USD Do not hesitate to call with any further questions and we look forward to doing business with you. ALLSET MACHINE- EBAY DEPARTMENT- 216-433-7171– www.amindustrialmachinery.com_New ... moreArrivals Daily! Conditions: Used items sold hereunder are neither designed nor manufactured by the seller, and this sale of these items is on an as-is and without any representations or warranties. Expressed or implied, of any kind including safety, condition, or quality. Seller further assumes no responsibility to provide safety devices or equipment necessary for the protection of the user or to comply with applicable governmental laws or requirements. It is agreed and understood that purchaser assumes this responsibility and the above is an integral part of this sale. All sales are F.O.B. Cleveland. Ohio unless otherwise specified.
|
|
|
Vintage Elegant French Princess Cradle Telephone Victorian Bakelite Rotary Table
Vintage Elegant French Princess Cradle telephone. This Victorian styled reproduction of an antique French rotary phone and features a classic rotary dial with a clear decorative cover to place your phone number or a picture. This ivory colored phone is a great addition to any vintage setting! The receiver sits atop a tall cradle made of gold tone metal. Possibly brass. The underside says"Made in Korea" APPROX. MEASUREMENTS: 6.5"deep x 5.5"wide x 7" tall This piece of furniture is vintage and not new. I leave as is to retain vintage value. If item is damaged in shipping, buyer files claim due to posession. Please remember that jolting damage can occur in shipping that leaves no physical marks, especially with electronics. If you have any questions please ask!
|
|
|
Troyke T5C 1 A 4 Spindle 4th Axis Rotary Table 5C Collet Chuck drive CNC Indexer
TROYKE T5C-4-A MULTI-HEAD CNC ROTARY TABLE GENERAL SPECIFICATIONS: DATE OF MANUFACTURE 2003 DIMENSIONS. APPROX. 36"L x 11"W x 10"H EQUIPPED WITH: THIS 4-HEAD 5C COLLET TROYKE TANDEM ROTARY TABLE HAS A 6.75" BASE-TO-CENTER OF COLLET HOLDER. THE FOUR SERVO DRIVEN ROTARY UNITS ARE 5" FROM CENTER-TO-CENTER. THIS TABLE HAS PNEUMATIC COLLET CLOSERS& BRAKES. 1.1" HOLE THROUGH SPINDLES. CAN BE MOUNTED IN HORIZONTAL OR VERTICAL POSITION. INCLUDES THE 6' CABLES. AIR LINE, AND MANUAL. VIDEO OF UNIT UNDER POWER; AVAILABLE UPON REQUEST* Questions? 262)895-3462 or Thanks for looking and be sure to visit our Ebay store for all of your metalworking solutions. Bid With Confidence! Check out my other Auctions by clicking View seller's other items l ink above. Or visit my e B a y Store! Our Web Site is displayed within ... moreour About m e Page above in the" Seller info" area above.
|
|
|
3.35" Shibaura Model BT- 8DR1PD Table Type Horizontal Boring Mill Rotary Table
6669- Shibaura Table Type Horizontal Boring Mill(Rotary Table) Manufacturer: Shibaura Model: BT- 8DR1PD S/N: 163591 Year: 1980 Specifications: Spindle Diameter 3.35" Spindle Nose#5 MT Spindle Speeds(16) 20- 1.000 RPM Spindle Travel 19 1/2" Table Size(Rotary) 35" x 41" Longitudinal Table Travel 31 1/2" Cross Saddle Travel 39.4" Vertical Head Travel 35.4" Feeds(24) 0.0009" 0.15" Dimensions(L x W x H) 162" x 102" x 106" Weight 20.000 Lbs. Equipped With: Rotary Table 24" Facing Head Pendant Control Horsepower: 12 Location: Huntington Park. CA. BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery ... more2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes: Prices do not include any federal
|
|
|
#RNCB-501R TSUDAKOMA 19.5" Big Bore CNC Rotary Table (New 2002)
Model: RNCV-501R TSUDAKOMA 19.5" Big Bore Horizontal/Vertical CNC Rotary Table. S/N: 020419(New 2002) Specifications: Table diameter Table height(horizontal position) Table center height(vertical position) Overall height(vertical position) Center bore diameter Table gyration angle per 1 pulse T-Slot size Load capacity(horizontal) Load capacity(vertical) Maximum rotation speed 19.5" 12.99" 12.2" 22.24" 7.087" 0.001° 0.7087" 1.320 Lbs. 550 Lbs. 8.3 R.P.M. Equipped With: Hydraulic clamping FANUC AC servo motor- Alpha 12/2000. AO6B-0142-B075#7000, 2.1 kW, 2.000 R.P.M, 200 volts Approximate Weight: 1.100 Lbs. Location: F.O.B. Truck. Hauppauge- Long Island, NY- We Ship Worldwide Reference# XSA_GM3231 g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14b0f693301-0x10e-
|
|
|
ANTIQUE WHITE ROTARY USA SEWING MACHINE STEAM PUNK TABLE LAMP ** VERY COOL**
ANTIQUE WHITE ROTARY U.S.A. SEWING MACHINE TABLE LAMP IT WEIGHS 29 LBS AN EARLY 20TH CENTURY MANUAL WHITE ROTARY U.S.A. SEWING MACHINE THAT HAS BEEN CONVERTED TO A TABLE LAMP. LAMP WORKS GREAT. HAS VERY DECORATIVE MULTI-COLOR TRIM ON THE MACHINE AND GOLD TRIM ON THE BED. IT ALSO HAS A DECORATIVE FRONT PLATE. THE WHEEL SPINS AND THE NEEDLE HOLDER GOES UP AND DOWN. THE BOBBIN PLATE HAS BEEN REPLACED WITH A PIECE OF METAL. THE MACHINE WILL SCREW OFF THE BASE TO DISCLOSE A SECRET HIDING SPACE. THE MACHINE NEEDS SOME TLC AND A GOOD CLEANING. THIS LAMP WOULD MAKE A WONDERFUL ADDITION TO A SEWING ENTHUSIAST'S DECOR!
|
|
|
Tsudakoma CNC Rotary Table with Manual Tilt
Tsudakoma 251mm CNC Rotary Table in good used condition. The table has an untested Hurco labeled AC servo motor manufactured in 1990 by Yaskawa the motor is rated.85 KW. 5.39 N-m. The table has a hydraulic brake system. We will add shipping weight later this week. For now we will estimate at 300 lbs.
|
|
|
VERTEX HV-10 10 INCH Horizontal & Vertical Precision Rotary Table
LISTED ITEM VERTEX HV-10 10" Horizontal& Vertical Precision Rotary Table CONDITION This unit saw occasional use in a small machine shop and is in very good condition. Controls operate flawlessly and unit performs like a new system. Only signs of use are some areas on the hand crank where some of the satin finish has rubbed off. There is also a minor scratch on the rear of the unit and a some very light scratches on the face of the unit and handles consistent with light use in a working environment. DESCRIPTION VERTEX is a very high quality Taiwanese precision rotary table that represents a great value. The unit features high density Meehanite construction and it is inspected by the HEIDENHAIN process to ensure flatness and parallelism. The HV-10 rotary table has been designed to be used where a precision work positioning device is ... morerequired. It allows the operator to mill or drill components at exact intervals around a fixed axis. It can be used in either a vertical or horizontal position. These tables have a totally ground finish which provides high precision and smooth rotation. The worm gear ratio is 90:1. Providing 4' of rotation of the table with one revolution of the hand wheel. The vernier scale is calibrated to 10 sec. The hardened and ground worm gear incorporate a quick release system for manual indexing. The oil bath lubrication system that allows for extremely smooth turning operation and accurate positioning. SPECIFICATIONS: Table Diameter: 9.84" 250 mm) Morse taper center hole: MT3 Diameter of center hole: 1.1811" x 0.2362" Center height for vertical mounting: 6.5" Width of T-slot: 0.55" 6 T- slots Width of locating key: 0. 629" Transmission ratio of worm gear: 1:90 Vernier reading: 10" Indexing accuracy: 60" Maximum working load: 485 lbs( horizontally) Maximum working load: 220 lbs( vertically) Surface to center slot squareness 0.0003" Taper center bore concentricity TIR 0.0005" Surface to base parallelism 0.0008" Surface to angle f
|
|
|
NICE !! PALMGREN 10 " ROTARY TABLE 3 AXIS / TILT
NICE! PALMGREN 10" ROTARY TABLE 3 AXIS/ TILT Palmgren Rotary Table accurately position work on the X and Y axes. As well as 360º top rotation. With this versatile table, it is possible to do hundreds of jobs that were never before possible using a standard machine. The table may be used to position or to actively feed under the machine spindle. Tops are ground to 0.001" total indicator reading. Heavy handles permit smooth movement and do not extend below the base, eliminating interference with the machine table. Cross slide travel is 4" on 8" and 10" tables. Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|
|
Girard Transmissions Rotary Table W138 1/60 __ W138160
Our internal inventory number on this product is 20Y# 28-B-1-K/2 PLEASE NOTE: This part was removed from a working machine. We have no way of testing it once it is removed. It is being sold in good condition unless otherwise stated. Please contact us with any questions. The item in the pictures may not be the item you will receive, since we have Multiple Quantities of this unit. This is just a rep. of what you will be receiving. To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! You won't want to miss any of our $.01 NO RESERVE auctions! DESCRIPTION: You are bidding on a Girard Transmissions Rotary Table. Type: W138 1/60 W138160 W138 1/6O W13816O App. Weight: 59 Lbs. Dimensions: 14" x 10" x 9" ... moreCosmetic Condition Rating: 3/4- FAIR/GOOD Note: This is solely a cosmetic description of the item. This part was pulled from a working machine. And is being sold in good working condition unless otherwise stated! 1) Very Poor 2) Poor 3) Fair 4) Good 5) Like New Condition*NOTE* FREE SHIPPING& HANDLING to lower 48 States via UPS Ground Service. All Other Domestic Shipments pay $18.00 Boxing/ Handling PLUS shipping costs from Zip 49534! All International Shipments pay $23.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPANY TO GET YOU A BETTER PRICE! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 a.m. delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. International Shipping Policies: We ship FedEx International. UPS International, USPS Express International. Only when requested, we ship US
|
|
|
SMALL 6" RIGHT ANGLE ROTARY TABLE FROM THE TOOLBOX OF A RETIRED TOOLMAKER
THIS AUCTION IS FOR A NICE SMALL 6" RIGHT ANGLE ROTARY TABLE FROM THE TOOLBOX OF A RETIRED TOOLMAKER. YOU CAN USE IT FLAT OR STAND IT UP 90 DEGREES. DOESN'T REALLY SHOW ANY WEAR. JUST HANDLING AND STORAGE. LOOKS TO BE IN EXCELLENT SHAPE. EVERYTHING MOVES FREELY. wHAT YOU SEE IS WHAT YOU GET. GOOD LUCK AND THANKS FOR LOOKING!
|
|
|
Nikken Kosakusto NST-300 4th Axis Rotary Table
Nikken Kosakusto NST-300 4th Axis Rotary Table Previously owned in good condition
|
|
|
machinist tools,bridgeport 15" rotary table
15" bridgeport rotary table.Good condition
|
|
|
Haas Hrt310 8" 3-jaw Chuck 4th axis rotary table Cnc
This sale is for a 8" 3-jaw Chuck pre configured to be used with a Haas HRT310 Rotary. If you're any questions or would like to make an offer please call or text me at 573-578-9890
|
|
|
Haas HRT 210 / 160 Servo Motor, CNC Rotary Table # 93-4525 4th Axis Brushless VF
Haas Part Number 93-4525; an AC Servo Motor for certain Haas Rotary Tables(brushless HRT-160 or HRT-210) See pictures for more specifics like the number of pins on the plugs and the Manufacture's specifications. It's been tested and it works perfectly.
|
|
|
Sherline Rotary Table, Plus 4-Jaw chuck, and More! Guarrenteed or money back
Up for auction is a combination of Sherline products as seen in the pictures. Has a little bit of oxidation from sitting on a shelf in storage but is smooth and tight. yes needs cleaned up. Currently has the hand wheel attached but comes with the steeper motor attachment and all parts. A stepper motor is also included. Also has a four jaw independent chuck. Hold down hardware and angle plate. Has some literature with it also. This is a very nice setup. Guaranteed to be working fine or money back. If its not what you want just send it all back but im sure you are gonna like this setup. Ships FREE USPS Priority mail.Monday thru Friday. Priority mail Express is available at buyers expense.
|
|
|
ROTAB 36 MODEL 36-2 Tilting T-Slotted Motorized Rotary Table
ROTAB 36 MODEL 36-2 Tilting T-Slotted Motorized Rotary Table Contact me if you have any questions? Check out my other listings. Thanks!
|
|
|
VIDEO Haas HRT310 Rotary Table 12.2"d 4th Vf Vmc Milling Cnc Mill Indexer 17pin
The sale is for a nice low hour Haas HRT310 Rotary. Cost over 14k new. If you have any questions or would like to make an offer you can call or text me at 573-578-9890 VIDEO:
|
|
|
Lanco/Lancaster S-32-150 Rotary Indexing Table Indexer 90V DC
Nice indexing Rotary Table.
|
|
|
2005 A.G.Davis 4 / 5 Axis Trunion Type Rotary Table - NEW COST APPROX.$100,000
NEW COST WAS OVER $100.000 IF YOU HAVE ANY QUESTIONS. PLEASE CALL RICH AT 760-633-4801 CLICK ON BUTTON BELOW TO BE INCLUDED ON THE EMC LEASING COMPANY EMAIL LIST OF MACHINES TO BE LIQUIDATED SHORTLY. Join Email List For you can trust Click to view larger photo Specification Description Rotation, 360.000 deg, Equipped With: Very little use- Used as backup table for an Edgetek CBN Grinder. Ultra Precision 5th Axis Rotary Table
|
|
|
Haas HRT-210 CNC 4th Axis CNC Rotary Table Brush Servos RED 1998 A Axis 17 Pin
Haas HRT 210 Brush Rotary Table Specifications: Diameter… 8.3" 210 mm Number of Std T-Slots… 6@ 60° Max Speed… 0.001 to 100°/sec Max Torque… 210 ft-lb 285 Nm Runout Max… 0.0005" 0.013 mm Backlash… 30 arc-sec Center Height… 6.000 ± 0.001" 152.40 ± 0.03 mm Gear Ratio… 90:1 Timing… 2:1 Max Rotation… 999.999 ° Power Requirement… 115 VAC ± 10% 15 A Air Pressure Max… 120 psi 8.3 bar Sales contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared ... morefunds are required prior to shipment Payment methods include wire transfer. Certified check, or company check Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(520 Machinery Sales LLC and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. 520 MACHINERY SALES LL
|
|
|
BRIDGEPORT TORQ CUT 30 CNC VERTICAL MACHINING CENTER MILLING , ROTARY TABLE
BRIDGEPORT TORQ CUT 30 CNC VERTICAL MACHINING CENTER MILLING. ROTARY TABLE. THIS MACHINE IN GOOD RUNNING CONDITION. IT IS RUNNING IN OUR MAHINE SHOP AND CAN BE INSPECTED.
|
|
|
42" Stainless Steel Accumulation Feeding Turntables rotary turn table Elf
For sale is a 42" Elf bottle feeding accumulation table that has a stainless steel top. I have three of these for sale. Two come with the optional dust cover. These tables raise and lower with a hand crank, are speed adjustable, and have 1/3 HP Baldor motors that are currently setup for single phase 110V but can take in 208-230 as well if desired. We used these for a packaging line that we no longer operate. These are quality American made by Elf Packaging with less then 4 years of use on them. Shipping will be freight and buyer can pay the shipping company directly. This is sold as currently working but as is condition.
|
|
|
Black n Decker 10" Rotary Table Miter Saw
Black n Decker 10" Rotary Table Mite Saw
|
|
|
Antique Domestic Rotary Sewing Machine With Wood Sewing Table /Case
ANTIQUE DOMESTIC ROTARY SEWING MACHINE WITH WOOD SEWING TABLE/CASE
|
|
|
SMC MSQA10L2 Pneumatic Rotary Table, High Precision, 180 degrees, 1.0MPA Max
SMC MSQA10L2 Pneumatic Rotary Table. High Precision, 180 degrees, 1.0MPA Max From our inventory we are selling an SMC Pneumatic Rotary Table/Rack& Pinion Style. Specifications: Model# MSQA10L2 More Information: Precision: High Precision Size: 10 Shock Absorber Type: Shock absorber for low energy Port location/Rotation: Standard Type/ 180 degrees Auto Switch: 3) D-F9PV, ST25-4-D SKU# SB-081655 2 lbs Next Day Automation focuses strongly on quality of items that we sell. That’s why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. We will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find items damaged beyond repair. If you have any questions. Feel free to contact us. Shipping Weight: 2 lbs Payment ... moreTypes Our preferred payment option is PayPal. However. You can use a Credit Card through PayPal as a“one time payment” Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from Next Day Automation. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. Next Day Automation. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Messaging: Contact us though ebay messages. Address: Next Day Automation 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Office Hours: Monday- Friday(8:30am- 5:00pm) Phone: 763)493-6305 Fax: 763)493-5782. Please allow a reasonable amount of
|
|
|
PALMGREN PRODUCTS ANGLE VISE ROTARY & INDEXING TABLE CATALOG 219 1971 #RR913
This sale is for ONE previously owned COPY(original not a photocopy) of: Palmgren Machine Vises& Tables. PALMGREN PRODUCTS: ANGLE VISES. ROTARY& INDEXING TABLES CATALOG 219. Chicago 1971) 31 pages bound in a slightly dirty soft cover with an old dealer sticker on the front cover and minor wear along the spine. This catalog displays images& dimensional drawings and provides descriptions and specifications for: air vises, angle plates, angle vises, cross slide tables, drill press vises, vises, indexing attachments, lathe milling attachments, milling machines vises, milling tables& slides, power rotary tables, production vises, rotary tables& slides, tilting table& slides, utility vises, vertical horizontal rotary tables, work holders and accessories. This item i s in excellent-good overall condition and would make a ... morenice gift for the collector of Palmgren products. This PUBLICATION is being offered at an exceptional price. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items cross the border. These are the sole responsibility of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipp
|
|
|
ALLENAIR 725 EAC 12 Pneumatic Rotary Index Table
ALLENAIR 725 EAC 12 Pneumatic Rotary Index Table Scroll down for more pictures. You are looking at a Allenair 725 EAC 12 pneumatic rotary table. I have not used or tested this item. In very nice condition! The pictures are part of the description. Please look at them carefully and SCROLL down for more pictures. If you need more pictures. Have a question or we missed something- Message us and we will get you what ya need. THANKS FOR LOOKING! The small print: We are not experts on anything we sell and we are only human. So. Every now and then we may miss something or just make a mistake. Therefore. If you have a problem or concern we ask that you contact us first before leaving a neutral or negative feedback for the opportunity to resolve the issue. We thank you in advance for this courtesy. WHAT TO EXPECT FROM OUR LISTING DESCRIPTION: Expect ... morethe item pictured and as described above. Most of the items we sell are vintage and may show wear from use and age. Condition is based on this unless otherwise noted. Most items are sold as found. COMMUNICATION: We will keep you informed of purchase to insure smooth transaction. If you have any questions or concerns don't hesitate to ask. We will answer in a timely manner. SHIPPING TIME: We generally ship the next business day after payment is received. If the item is large and/or heavy and requires extra care in packing the handling time will be longer. SHIPPING $ HANDLING CHARGES: Most of our listings are offered with free shipping(U.S. only) If shipping is not free in the listing it will be calculated to destination. At times a small handling fee may be charged to offset packing materials. If the item is large
|
|
|
8" DIAMETER HORIZONTAL & VERTICAL ROTARY TABLE by ENCO
Up for grabs we have an 8 inch diameter Rotary Table made by Enco. Dial is in good shape and the graduations are legible Operates free and smoothly Table and mounting surfaces are in good shape 3 long& 3 short T-slots for various mounting configurations. This very handy item is good for a variety of machining procedures. Can be used for machining wood. Metal, plastic and virtually anything you can mount on it.
|
|
|
NICE !! TROYKE NO. U 9 HORIZONTAL / VERTICAL ROTARY TABLE 9 "
NICE! TROYKE NO. U 9 HORIZONTAL/ VERTICAL ROTARY TABLE 9" Size: 9" T Slot: 3/4 x 7/16" Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|
|
TSUDAKOMA Tilting 12in Rotary Table 4th & 5th Axis CNC Machining Center Milling
FREE SHIPPING QUOTES ANYWHERE IN THE USA- SUPER LOW RATES WE WILL BAND AND SHRINK WRAP THIS TO A PALLET FOR FREE FREE LOADING- PLEASE CHECK OUT OUR OTHER MACHINERY ON EBAY 4th& 5th Axis Rotary Table Table Dia: 12in Work Weight Capacity: 950 lbs This Table Came From a Major AeroSpace Facility. They Closed Down the entire Machine Shop. This Rotary Table was in full working order the day the cut the power to all the machinery. This Plate can be inspected through out the auction in our warehouse. We are located next to the Philadelphia Airport. I will be Happy to answer any questions you may have. Machine is being sold as is. The specs on this machine are subject to buyers inspection We have Excellent feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and ... moreour EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocation's- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
YUASA ROTARY AXIS 4th Table Nice SPDX-6F
1.5" through bore(without top plate installed) Large Fanuc AC servo under the cover. Pneumatic brake. All pins on amphenol connectors look excellent. Very nice.Japanese quality. No international shipping on this. Local pick-up encouraged. Freight is buyers responsibility. Crating and drop off at local freight terminal is included in price.
|
|
|
Antique Bakelite 1954 Rotary Table Desk Telephone w Cord As Is or for Parts
You are looking at a great antique. Black, Bakelite rotary desk phone. The production date is December of 1954, the cable, spiral cord, and leather pad feet are all present. It has not been quality-tested, but the rotary and hang-up tension, and the outward appearance are very good. If you have any questions. Please contact us before bidding to make sure you get the best possible service. Shipping& Selling FAQ: We are generally able to offer free shipping. If there is a cost we will combine the price unless stated otherwise. If there is a shipping cost on the item. The buyer is responsible for the cost. We ship within 1-5 days of the date of the payment received. If a delay occurs. The buyer will be promptly notified. All sales are final. If there is a problem with your item or the transaction, contact us for help. Unless stated otherwise. ... moreAll of our items are antique, vintage, or previously owned.
|
|
|
Vintage AT&T Western Electric Telephone Beige Table Desk Top Rotary
TESTED- WORKS. WESTERN ELECTRIC- CS500DM- 1PTY- 83326.
|
|
|
Vintage Tudor Table Hockey Game Rotary Drive. One Of The First Hocky Games!!!!
Up for auction is this vintage tudor tru action rotary drive hockey game.measures 40" long and 18" wide. All players are there and all controls work! The top of board is stained and some players slightly bent and little surface rust. Box is in pretty rough shape. Over all a nice game from the past! And would be great for any collector. Note" did not try to clean the top I will leave that up to the buyer; Any questions please ask. Check out my other listings also: Any less in shipping I will refund the rest back to u! `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14b363cefc2-0x10e-
|
|
|
2012 Okuma Genos M560v VMC w/ Probing and Nikken 300mm Rotary Table
2012 Okuma Genos M560v CNC Vertical Machining Center w/ Probing and Nikken 300mm Rotary Table Based on the proven technology of the MBV Series. The GENOS M Series offers Okuma value at an economical price. Thermally-stable, accurate, and rigid, these machines provide high productivity and profitability. Equipped with Okuma's industry leading THINC-OSP control, these environmentally friendly vertical lathes have the power and flexibility to deliver results time after time. SPECIFICATIONS: Travels: X Axis 41.340" Y Axis 22.050" Z Axis 18.110" Taper CAT 40 Spindle Speed 12.000 RPM Spindle Motor 30 HP Max Feed 1.260 IPM Rapid Rate 1.575 IPM Spindle to Table(Min) 5.910" Spindle to Table(Max) 24.020" Table Size 51.180" x 22.050" Max Workpiece Weight 1.980 lbs. Tool Capacity 32 Tool Change Time 1.2 Seconds ... moreMax Tool Length 11.810" Max Tool Diameter 4.920" Max Tool Weight 18 lbs. Machine Dimensions 122" x 99" x 108" Machine Weight 16.500 lbs. Power Requirements 220/ 480 Volts(3 Phase) EQUIPPED WITH: 32 Station ATC Mayfran Chip Conveyor Additional M-Codes M&H Wireless Tool Touchsetter M&H Infrared Probe Package Nikken 300mm Rotary Table with 12" Chuck- http:www.lyndexnikken.com/images/files/image/catalog/ okuma-rotarytable-brochure.pdf 4th Axis Air/ Hydraulic Booster Less than 1350 Operating Hours $139.900 Located in Texas CNCMachines.Net Michael@cncmachines.net 844-262-6789 WWW.CNCMACHINES.NET Please contact Michael Ford 844.262.6789 with any questions or concerns. WE are NOT a transportation company. We are NOT equipped to properly rig this item. We do have experience in helping hundreds of our customers finding the right sources and assist in helping them through the process of preparing. Rigging and shipping to their facility. CNCMachines.Net has the right to resell the item if not paid in full, all items are subject to prior sale. TERMS& CONDITIONS: The following terms and conditions(these"Terms and Conditions" are agreed to by
|
|
|
12" Tsudakoma Model RNCM-301R CNC Rotary Table; Mfg. 2001
More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Rec# 3559(1) Used 12" Tsudakoma Model RNCM-301R Rotary Table; S/N 020217 Specifications: Handedness.Right Table Diameter.12.6" Center Height.8.27" Center Bore.40H7 Nose Diameter 1.57" Through Bore Table T-Slot Width.14H7 Guide Block Width.18h7 Servo Motors.iF8. IF12 Speed Reduction Ratio.1/360. 1/180 Max. Table Speed.5.5 RPM 11.1 RPM Indexing Accuracy.15 sec Repeatability.4 arc sec Max. Work Weight.330 lbs. vertical) 771 lbs.vertical with tailstock) 771 lbs. horizontal) Overall Dimensions.27.95" L x 16.34" W x 11.3" H Weight.440.9 lbs. 200 kg] FOB.Casa Grande. AZ. Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact ... moreCharles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills(both horizontal& vertical) chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cradles& levelers) CMM's, parts washers, radial arm drills, drill presses, dust collectors, generators, transformers, grinders(tool& cutter, univ
|
|
|
Yukiwa CNC Rotary Table, JNC170L-BQT5, Brother TC-R2A, Drill & Tapping Machine
I have two Yukiwa Seiko JNC170-BQT5 CNC Rotary Tables that I'm selling individually. I removed these from a used Brother TC-R2A drill and tapping machine. These units were tested before removing and are in good used condition. Units table diameter is 170mm and table center through hole diameter is 45mm. Information is available on the internet buy looking up the model number. I have no additional information regarding these units. Please see photographs. I do not accept returns; thanks for looking.
|
|
|
15" DIAMETER HEAVY DUTY ROTARY POSITION TABLE
Call Us Today! 626.330.4647| 15" DIAMETER HEAVY DUTY ROTARY POSITION TABLE, IN GREAT CONDITION COMES AS SHOWN IN PHOTOS WEIGHT: 120 LBS APPROXIMATE TOTAL HEIGHT: 4-1/4" T-SLOTS: 7/8" x 1/2" APPROXIMATE OVERALL MEASUREMENTS: 16" x 18" x 4-1/4" Copyright 2014 1 Machinery Sales.com | All Rights Reserved, DESCRIPTIONS Please read descriptions carefully. We list any features, specifications and details we know and/or research. When possible we test the basic features If you don’t see the information you need or notice any discrepancies; Contact Us! We are here to answer all your questions regarding our eBay Listings and our eBay Store. Don't assume items come with any accessories not shown in pictures. All items come as shown in pictures. PAYMENTS We accept Visa. MasterCard and Discover via PayPal. Payments ... moreare expected within 3 days after the close of the auction. An eBay Non-Paying Bidder Notification will be filed if payment has not been received. After 10 business days of non-payment item will be relisted and no payment from previous transaction will be accepted. Sales Tax is calculated on the final auction cost plus shipping charges and must be paid prior to shipment. STORAGE We offer storage services from small items to full containers. We also offer container loading. Contact us for prices. For buyers bidding on. Or buying multiple items, we will hold them for up to 7 days at no charge, after 7 days fees may apply. Contact us when you are planning to bid on multiple items across multiple days. We offer two kinds of storage fees: Inside: $ 2.50 per sq. foot, Outside: $ 2.00 per sq. foot, FEEDBACK Positive feedback will be left after payment has been received. If after receiving your item. You have concerns, questions or the item is not what you expected please Contact Us! We want to make your transaction a pleasant experience. Don’t leave Negative or Neutral feedback before doing it. We are professionals and we are here to help you. RETURNS We accept returns for all our ite
|
|
|
Meuser M85BF-36498 Horizontal Boring Mill,rotary table,Mitotuyo DRO INV=90192
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a 6498 Horizontal Boring Mill. Mitotuyo DRO. Pinnacle of German engineering, very tight machine, works well. CALL IGOR 630-235-6603 TO ARRANGE VIEWING AND PURCHASE. THIS ITEM WILL_NOT_ BE RELISTED* Spindle Quill Dia 3-1/2" 3,2-1000 spindle speeds, 15HP, 43" Spindle Quill Travel, 48" x 53" Table w/ built in rotary table, t-sotted surface, 40" cross travel, 40" vertical travel, 55" longitude travel, 22" face head diameter, 230/460 volts, 3 phase, 60 cycle. NOTE: THIS MACHINE IS STILL AT THE PLANT. I CAN LOAD IT ON YOUR TRUCK FOR FREE. TIME IS OF THE ESSENCE AND EXTREMELY PROMPT PAYMENT AND PICK-UP IS REQUIRED. This item MUST BE GONE by Feb. 9. PLEASE, IF YOU DO NOT HAVE MONEY TO PAY* DO NOT EVEN BOTHER BIDDING OR CALLING ME. I DO FEEL SORRY FOR ... moreTHE POOR PEOPLE, BUT I DO NOT WANT YOU TO BE BIDDING. No foreign bidders. No exceptions. NO CANADIANS. This item ships by Freight(by truck) It cannot be shipped by UPS or USPS. This item does NOT offer free shipping. If you need to discuss shipping prior to bidding. Call me at 63O-235-66O3. Please do NOT pay until you discuss shipping with me and I invoice you. The buyer has three options: Free pick-up at my location in Berkeley. IL, 60163, I can get a freight quote and charge you my cost of freight and arrange shipping. You can arrange shipping with your own freight company. To whom you would pay. It needs to have electronic tracking capability to comply with PayPal requirements. Title and risk passes to buyer at pick-up. I will also charge you a palletizing charge. Charge is $15 for a regular pallet and more for custom pallets. Any crating beyond just banding to a pallet will incur an additional cost to buyer. I never ship for free and I do not consider any offers that demand free shipping. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflic
|
|
|
VINATGE LORRAINE METAL MFG CO. ROTARY CHESSE/FOOD GRADER COUNTER/TABLE MOUNT
VINATGE LORRAINE METAL MFG CO. ROTARY CHESSE GRADER 1) USED. BUT STILL HAS A LOT OF LIFE LEFT IN IT. 2) TABLE/COUNTER MOUNT 3) HAND CRANK. WITH A WOODEN HANDLE. 4) THIS ITEM IS USED. WITH THE NORMAL WEAR AND TEAR. 5) THIS ITEM BELONGED TO MY GRANDPARENTS. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO ASK. THANKS FOR SHOPPING!
|
|
|
TROYKE 15” VERTICAL/HORIZONTAL ROTARY TABLE U-15-P~ONTARIO, CALIF.~
TROYKE 15” U-15-P VERTICAL/HORIZONTAL ROTARY TABLE USED BUT IN GOOD WORKING CONDITION TROYKE MODEL U-15-P 15“ TABLE SOME HOLES DRILLED IN TABLE SEE PHOTOS COMES AS SHOWN( SEE ALL PICS) WE ACCEPT ALL MAJOR CREDIT CARDS* TAX MAY APPLY* PAYMENT MUST BE MADE WITHIN 4 DAYS OF PURCHASE! ATTENTION! EFFECTIVE JANUARY 1. 2012 BELTRAN INDUSTRIAL SALES WILL BE CHARGING A $25.00 FEE FOR EACH ITEM REQUIRING A PALLET. THIS WILL INCLUDE A STANDARD 48" X 40" PALLET. METAL BANDING, AND STRETCH WRAP IF NEEDED. ANY ITEM REQUIRING A LARGER OR CUSTOM PALLET/CRATE WILL BE EXTRA. PLEASE CALL FOR DETAILS. CALL FOR LOW COST SHIPPING! LOCAL PICK UP IS ALWAYS AVAILABLE ALONG WITH FREE LOADING BY APPOINTMENT ONLY! PLEASE. PLEASE, PLEASE CALL AHEAD! EVEN DELIVERY CAN BE ARRANGED! ATTENTION! ANY RETURN SHIPPING MUST BE PAID BY THE BUYER! WE ENCOURAGE ALL BUYERS ... moreTO VIEW ALL PHOTOS AND ASK ALL APPROPRIATE QUESTIONS PRIOR TO MAKING FINAL PURCHASE! ALL ITEMS COME"AS IS" ALL ITEMS ARE USED UNLESS OTHERWISE STATED! QUESTIONS? FEEL FREE TO CALL ROBERT(626) 945-6018 OR GABRIEL(626) 945-6951 DON'T FORGET TO VISIT OUR STORE TO VIEW A WIDE VARIETY OF USED& NEW INDUSTRIAL MACHINERY. TOOLS, EQUIPMENT, MORE! INVENTORY CHANGING DAILY! THANK YOU FOR YOUR BUSINESS! by adding my eBay Store to your Favorites! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14b3e252403-0x10a-
|
|
|
SMW 8" NC Rotary Table W/ Tailstock Unit, System 50 Controller, Approx 1995 Used
Title: Tsudakoma 12" NC Rotary Table. RNCV-301B, S/N 60882, Used Description: Our Internal Stock# 5-E6-1(1-30-15 dale) You are about to purchase the following item: 1- Tsudakoma 12" NC Rotary Table. RNCV-301B, S/N 60882, Used Catalog# Serial# Rotary Table Drive By: CMC Servo Motor PM Servo Motor Model# 4104DCHD00F0SJ0016 There is no Servo Amplifier with Unit SPECIAL NOTE: APPARENTLY THE CONTROLLER DOESNT WORK. WE SOLD THE UNIT TO A CUSTOMER FOR THE AMOUNT OF $ 3750.00 BUT THEY COULD NOT GET THE UNIT TO FUNCTION. SO THEY RETURNED IT. YOU WILL HAVE TO DO SOME WORK OR REPLACE THE CONTROLLER TO MAKE IT FUNCTION STAND ALONE. THE TABLE IS BEING SOLD IN GOOD WORKING CONDITION. This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) ... morewe can get you a great shipping rate via UPS LTL Freight to your Business location with a Lift Truck/ Loading dock. If you would like to get the exact cost to your destination feel free to contact us at any time. Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that
|
|
|
GREEN LIGHT ELECTRIC TABLE TELEPHONE GTE-ROTARY DIAL
BEAUTIFUL VINTAGE TURQUOISE TABLE ROTARY DIAL PHONE BY GENERAL TELEPHONE ELECTRIC(GTE) NO CHIPS OR CRACKS AND IT IS TRULY SPOTLESS. TESTED AND WORKING. THE PHONE WORKS NORMALLY WHEN CONNECTED IN TELEPHONE NETWORKS AND THE DIGITAL LINE(MBPS) TESTED NORMALLY. IS IN VERY GOOD CONDITION. SHIPPED WORLDWIDE. SHIPPING COST CHARGED TO THE BUYER. PLEASE. CONTACT ME TO INFORM YOU FOR SHIPPING COST TO YOUR LOCATION. LET ME KNOW. PLEASE, WHEN YOU RECEIVED THE PACKAGE!
|
|
|
Western Electric Rotary Dial Desk Table Telephone Beige 500 DM r83-6 +Box
Western Electric Rotary Dial Desk Table Telephone Beige 500 DM r83-6 +Box bottom has sticker saying: has broken edges on rear telephone cord plug. It doesn't stay in place tightly on the outer beige portion of shell- it pushes inside the phone loosely. You have to unscrew the shell. Pull grey plug out a bit to connect the phone jack into it, then screw the cover back into place. Once this is done the phone jack clips tight as it should its just loose inside the phone jiggles around. The grey plug needs to be replaced to stay firm on the edge of phone shell. NJ Bell Property- Not for sale Also has a MA BELL logo sticker Sold by: Bayonne SC/ Purchase Date: 6/16/83/ Model- TELve also a sticker add property of NJ bell not for sale The phone was tested briefly this month and works properly. Also: Although we did not have this item in our sight ... morethe entire time of its life this phone looks to have never been used. Its cosmetic condition is mint only a light coat of dust from storage over all these years. Original Western Electric box is also included. YOU DO GET EVERYTHING IN PICTURE We also have many other vintage telephones up for auction this month. EBAY GLOBAL INTERNATIONAL SHIPPING OFFERED ON THIS ITEM it WE ARE SELLING MANY OTHER TOYS- CHECK OTHER AUCTIONS& EBAY STORE- SAVE ON SHIPPING- SEE OUR POSTED DISCOUNT SHIPPING RATES BELOW! We cannot guarantee all original pieces are here. you do get everything in the picture We offer reasonable priced toys& merchandise at discount prices to save you money. We do not claim to know what was included originally when the item was new and since we offer many auctions we have limited ability to completely examine each item to determine all blemishes defects etc. When items are not stated as(MIB) new in box. Then you should assume items are used and can be less than perfect. Please feel free to ask questions regarding our items and wait for answers before you bid. We combine shipping on multiple purchases(domestically only) whenever possible as follows:
|
|
|
DeVlieg Spiramatic Jig Mill with Walters Rotary Table (Inv.25031)
DeVlieg 4H60 Spiramatic Jig Mill with Walters Rotary Table Serial number 8906 As recently removed from service at Jet Engine Manufacturer 9/11 40 x 60 Inch table 4 Inch Spindle 60 Inch table travel Sony 3 Axis DRO Slosyn Variable Speed Drives on Quill and Head. Bed covers have been taken off for transportation(see photos) But all are included. Walter Motorized Tilting Rotary Table with 2 Axis Heidenhain Readouts. Priced as shown to include rotary table. We will sell for $7500 less without rotary table. Contact us for further details and specifications. Inv.25031) Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating ... moreof items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Powered by a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14b44891dfa-0x10e-
|
|
|
Simplicity Deluxe Rotary Extension Table-18 Inch X 24 Inch 070659783609
Item has been used twice but is in new condition. Goes with Simplicity Deluxe Rotary Cutter& Embosser. Attaches for extra cutting area. Has all 4 legs.
|
|
|
milling machine Rotary Table 16" Kearney & Treaker Rotary Table Heavy Duty
You are bidding on a Kearney& Treaker or K& T Rotary Table 16" I use this rotary table several years ago and before my accident. To cut eight sides on a indexing head, that had to be dead accurate and all 22 parts were square perpendicular within plus or minus.0002 of course I had to heat treat the part and then use a cup will to finished the face with this indexing head. So it's accurate and reliable or repeatability. This unit has been used. And is still in usable condition. Please look at the photos and feel free to ask questions. Contact 804-878-3938 or 804-304-4408 for more information. This item is Sold As Is Where Is Without Warranty. Please do NOT pay with Paypal. Cash at pickup is expected! We live in Martinsville. Henry County, Virginia, near the Martinsville Speedway.
|
|
|
BELL SYSTEM WESTERN ELECTRIC TAN / BROWN ROTARY TABLE TELEPHONE 500 5-60
Free shipping, within the United States. Elsewhere welcome Global eBay shipping offered. International buyers. Click on Shipping, and shipping and Import Charges explained. Will ship within one business day of cleared Pay Pal received payment. Please check out my other listings. Thanks for looking! Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Bell System Phone Rotary Western Electric Beige Table vtg Dial desk telephone
800x600 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 800x600 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 800x600 Up for ... morebid is this vintage Bell System rotary desk phone made by Western Electric. This phone is in great condition and comes with advertising dial cover. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4* All items are sold as-is. We are only human. And are not experts on all items, but all items are accurately described. Feel free to ask any questions. All items will be packed with care.
|
|
 |