In 
 
Order by: 
Available to: 
Price: 
 - 
$
3,400
Buy It Now
$0 Shipping
Condition: Used
Location: Klamath Falls,OR,USA
$
2,500
2h 11m 2s
0 bids
$3,300 Now
$0 Shipping
Condition: Used
Location: Mishawaka,IN,USA
YCI Supermax 9" x 49" Bridgeport Type) Vertical Mill No. YCM-16VS YCI Supermax Ram Type Vertical Mill(Bridgeport-Type) Ref.78-480 Model No. ... moreYCM-16VS Serial No. 9103029 New 1990 This machine is very similar in design to the Bridgeport vertical mill. Table Size: 9" x 49" Longitudinal Table Travel: 34" Saddle Cross Travel: 12" Knee Vertical Travel: 16" Quill Travel: 5" Maximum Distance Spindle Nose to Table Top: 18-3/8" Spindle Speeds. Variable: 60- 4200 RPM Power Quill Feed Rates(3) 005. 0031, 0015 In/Rev. Spindle Nose Taper: R8 Overall Dimensions: 70" x 68" x 84" High Equipped With: Pathfinder 2-Axis DRO. 0.0005" Resolution Servo Type 150 Long. Power Feed Unit Hard Box Ways One Shot Lube 3-HP Variable Speed Milling Head 220/440.3/60 Approximate Net Weight: 2.200 Lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund
$
174.79
Buy It Now
$5.99 Shipping
Condition: New
Location: Bell,CA,USA
$
3,999.99
Buy It Now
Free Shipping
Condition: Manufacturer refurbished
Location: Watertown,CT,USA
USED MILLING MACHINE Make: Bridgeport S/N: 279777(1999) Model: Series 1 Condition: Very Good Table Size 9.0” x 48.0” X Axis Travel 35.0” Y Axis Travel ... more13.0” Quill Travel 5.0” Spindle Horsepower 2.0 Hp Spindle RPM(Vari-Speed) 60– 4.200 RPM Spindle Taper R-8 Voltage 230/3/60 Machine Weight 2.500 lbs. INCLUDES: Acu-Rite 200S 2 Axis Digital Readout. Chrome Ways& Gibs PRICE $ 9.500.00 Terms: Full payment prior to shipping Warranty: 30 Day MDNA Return Privilege F.O.B. Dousman. WI OPTIONAL EQUIPMENT New Servo Type 150 X Axis Power Feed(Installed) $ 825.00 New Maxi Torque Rite Air Power Drawbar $ 895.00 Our stock is always changing! Please call 262-719-0232 or"Google" our name! Alternative Machine Tool. LLC Purchasing Information: There is a chance that this item may sell locally at our facility before we take it down from eBay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check and PayPal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided 30 Day Return Privilege Policy is not available if stated in item description above Freight and Shipping: The machine is located in Dousman. WI(53118) Our loading Max is 10.000 lbs, Heavier machines will require rigging and charges will apply Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper See Description above for modifications to this information Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizing separately and it is not included with the sale price. We'll quote per customer requirements. Customer shipping method&
$
4,999.99
Buy It Now
Free Shipping
Condition: Used
Location: Louisville,KY,USA
$
7,900
Buy It Now
$500 Shipping
Condition: Used
Location: Bristol,CT,USA
$
12,500
3d 22h 37m 52s
0 bids
$0 Shipping
Condition: Used
Location: Longmont,CO,USA
HAAS TM-1 CNC TOOL ROOM MILL VMC VERTICAL MACHINING CENTER Specification TABLE SIZE: 47.5"x10.5" X-AXIS TRAVEL: 30" Y-AXIS TRAVEL: 12" ... moreZ-AXIS TRAVEL: 16" RAPID TRAVERSE RATE X. Y: 200 IPM RAPID TRAVERSE RATE Z: 200 IPM SPINDLE TAPER: CAT 40 SPINDLE SPEEDS: 6000 RPM SPINDLE DRIVE MOTOR: 7.5 HP MAXIMUM TOOL DIAMETER: 3.5" MAXIMUM TOOL WEIGHT: 12 Lbs. FLOOR SPACE REQUIRED: LxWxH) 85"x64" MACHINE DIMENSIONS: APPROX. 85"x64" NET WEIGHT: APPROX. 3300 LBS Auctions over $500.00 must pay by wire transfer within 48 business hours from auction close. Payment must be received by our bank within 72 business hours after auction closes. If payment terms are not met. Item will be re-listed or offered to the under bidder without further notice. This machine has been serviced regularly& well maintained and ready to go to work for you! You can email me with any questions& thanks for looking at my auction!
$
1,800
Buy It Now
$0 Shipping
Condition: Used
Location: Sidney,OH,USA
$
2,549
Buy It Now
$0 Shipping
Condition: New
Location: Pittsburgh,PA,USA
$
3,875
Buy It Now
$0 Shipping
Condition: Used
Location: High Point,NC,USA
$
3,450
Buy It Now
Free Shipping
Condition: Used
Location: Louisville,KY,USA
$
1,750
2d 19h 19m 58s
0 bids
$0 Shipping
Condition: Used
Location: Davison,MI,USA
$
6,000
Buy It Now
$0 Shipping
Condition: Used
Location: Pensacola,FL,USA
$
4,500
Buy It Now
Free Shipping
Condition: Used
Location: Pomona,CA,USA
B3 collet that probably has little use since the ink stamped Bridgeport name is still crisp and legible. 3/8" round. Very hard to find. Probably ... morecame out of a cherrying head. Free shipping 48 states. Thanks; Craig 330.547.6300
$
1,999.99
Buy It Now
$0 Shipping
Condition: Used
Location: Monroe,WA,USA
$
1,995
Buy It Now
$0 Shipping
Condition: Used
Location: New London,OH,USA
Bridgeport Milling Machine Ram head Type 36″ Table. 36″ table with Bridgeport vice. Table and head in good condition. 1 horsepower motor. 220/440 Volts ... more3 Phase. Can be seen running. Some colets. Tools etc included. Seller can load. Price: 2500.00. Location: MA. SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655 Ask for Joe
$
2,000
9d 15h 43m 52s
0 bids
$3,000 Now
$0 Shipping
Condition: Used
Location: Marshalltown,IA,USA
I remember when I had my first Milling Machine belt failure. It always seems to happen in the middle of a rush job too! If you are like me. A small shop ... moreowner or even a hobbyist, you do not have either the time or the money to pay someone to come and work on your machine because after all you like staying up half the night figuring most everything out your self! Sound familiar? Besides you are very mechanically inclined, have the tools and the know how and lets face it, you are CURIOUS to see how it works too. Since I have been there. Done that myself now oh about 8 times I decided to write these plans for those of you who have just about thrown half your toolbox across your shop trying to fight that@$* variable speed drive spring that is on your motor. It ranks right up there with garage door springs, only trickier to conquer! I can show you how to change this thing quick so you can get back to work in about an hour. As with all my printed plans. I offer the help of my years of Machine Shop experience at no charge. I am available by email, phone or text. Thanks for looking and always remember: You're not just fighting customers. But the toughest customer of all, PHYSICS!
$
400
Buy It Now
$0 Shipping
Condition: Used
Location: Fountain Valley,CA,USA
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Acu-rite DRO200S 3X M digital readout PN 532883-12 SN 31753830 Software ver. 1.1.3P(3X) ... moreJul 2 2009 On pics. 4 and#5 you can see that sensors actually work. Acu-Rite"X" and"Y" sensors. They are 26" and 42" total length. It also has an additional connector for a third scale. Wire are 11' and 12' respectively. This comes from a huge P&W 2E jig borer that was barely used at the Rock Island Arsenal. No foreign bidders. No exceptions. NO CANADIANS. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Buyer agrees to pick-up items paid for. Within 45 days of payment, and further understands that storage beyond reasonable time damages the seller. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage costs and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item.
$
2,250
Buy It Now
$0 Shipping
Condition: Used
Location: Roanoke,VA,USA
$
2,499
Buy It Now
$0 Shipping
Condition: New
Location: Grand Forks,ND,USA
$
1,750
Buy It Now
$0 Shipping
Condition: Used
Location: Milton,PA,USA
Bridgeport Vertical Mill variable speed head. Manufacturer: Bridgeport Model: Series 1 Long travel X 48" table. S/N: 211780 Year: mid 80's Head ... morewas completely rebuilt by Dan's Machine in Santa Fe Springs CA 3 months ago. We have bill of sale. Paid over 3k with parts and labor. A quick release quill stop and quick handle were installed also at this time. There is no hours on head. Runs like new. Table looks good only a couple of oops marks but backlash is tight and gibs feel really good. Table Length 9" x 48" Table travel'X' 36" Cross Saddle Travel'Y' 12" Vertical saddle travel 16" Spindle Speeds(Variable) 60- 4.200 RPM Spindle Nose R- 8 Spindle travel'Z' 5" Spindle Quill Feeds(3) 0.001" 0.006" 0.0015" Ram Travel 12" Dimensions(L x W x H) 60" x 60" x 72" approx Weight 2.000 Lbs. approx Equipped With: Bridgeport Table Power Feed X axis with adj stops One Shot Lube System from Bijur Horsepower: 1.5 220v 3ph with quick disconnect plug. No tooling or vices included. We can install a readout for additional charge. Location: Yorba Linda CA 92886. Industrial Park. Inspection: recommended BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. We have forklift to load on truck for no charge if required. Posted with
$
15,500
3d 22h 43m 4s
0 bids
$0 Shipping
Condition: Used
Location: Longmont,CO,USA
$
3,490
Buy It Now
Free Shipping
Condition: Used
Location: Rochester,NY,USA
$
3,250
Buy It Now
Free Shipping
Condition: Used
Location: Lebanon,NJ,USA
$
3,550
Buy It Now
Free Shipping
Condition: Used
Location: Middlesex,NJ,USA
$
4,950
Buy It Now
Free Shipping
Condition: Used
Location: Lebanon,NJ,USA
$
2,500
4h 7m 45s
0 bids
$0 Shipping
Condition: Used
Location: Orange,CA,USA
$
2,950
Buy It Now
$0 Shipping
Condition: Used
Location: Martin,MI,USA
You are bidding on a Bridgeport Series 1 Mill w/ Prototrak 2 Axis CNC Control. This is a very nice machine that I have done extensive work to get it to ... morethis condition. Variable Speed head has been redone within the last 10 hrs. of use. Prototrak Pendant was replaced with factory rebuilt unit 6 months ago. This machine has more options and equipment than any machine you will buy from a dealer. INCLUDES: Prototrak AGE 2 2 Axis CNC Control w/ Floppy Disk Drive& Remote Stop/Go Switch Acu-Rite X-Y.0002" Glass Scale Feedback- Lip Seal in Scales was just replaced. Acu-Rite Z Axis(Quill) Glass Scale- Reads on AGE2 Control. Kurt D675 Vise w/ Adj. Stop and 5/8" Keys on Bottom for Quick Alignment. New Rubber Way Covers for Y& Knee Axis Table T-Slot Covers Align Knee Feed Kurt BR1000 Automatic Power Drawbar Adj. Chip Shield- Swings out of the way Moffatt Flexible Arm Machine Lamp- 100W Quick Adjust Nut on Quill Stop Quick Adj. Twin Grip Quill Handle Collet Rack Shop Made Holders for RSG Switch and Vise Handle. Specifications: 2 Hp Variable Speed Head R-8 Spindle Taper 9"x42" Table Voltage- 220/440/3/60- I run this@ 220V on a Static Phase Convertor. Weight- Approx. 2.800# This machine is available after 4/5/13 when my new machine arrives. I will load on your truck or trailer for free. If you want this put on a Heavy Duty Skid w/ sides and prepped for shipping by a Common Carrier there will be a charge of $ 325.00. You are welcome to inspect this machine under power on weekends or at night. Please no lowball offers. I know what this is worth and don't have time to deal with people that do not. Call 262-719-0232 or email with any questions.
$
1,900
Buy It Now
Free Shipping
Condition: Used
Location: Rochester,NY,USA
$
3,250
Buy It Now
$0 Shipping
Condition: Used
Location: Holland,OH,USA
$
2,500
Buy It Now
Free Shipping
Condition: Used
Location: Fort Worth,TX,USA
Used Powermatic Houdaille Millrite Burke MVN Knee type milling machine with 8"X32" t slot table. 1Hp 110v 1ph motor, reversing switch, R-8, ... more4" quill travel, 260-3440rpms by vee belt change, 6 speeds, 1/8 turn backlash X, 1/8 turn backlash Y, Brown Sharp 6" vise, knee handle, and spindle spanner wrench. This is a smaller version of a Bridgeport great for home shop. It runs good bearings are quiet and smooth. Has some scratches and dinges in the table. Ways look decent. The head tilts 90 deg, and it had table stops. The paint has some chips but is still original. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Email me for a freight shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally, so the auction may be cancelled due to a local sale. Please read our feedback, 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified, so please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner.
$
5,500
2d 23h 15m 52s
0 bids
$0 Shipping
Condition: Used
Location: Suffolk,VA,USA
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2358569 A: 0013000000CXCfg O: 0065000000PQiuq PA: View Photo Gallery. ... moreRequest Freight Estimate. View Financing Options. Sell Your Equipment. Location: Auburn. WA 98002 Item Description. This is a no reserve auction for a Cincinnati Milacron T-35 5-Axis CNC Horizontal Machining Center Milling Machine Mill Dual Pallet. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. This item is located on Boeing property in Auburn. Washington. Rigging charges for professional removal will apply. Please see details below. Overview: Make: Cincinnati Milacron Model: T-35 Type: Horizontal Machining Center Serial No: 3123C0195-0002 Hours(shown at time of inspection) In Cycle Runtime: 26.502 hours Spindle Running: 23.038 hours Features/Specifications: Control: Cincinnati Milacron Acramatic 950 5-axis operation Dual pallet shuttle system Axis Travel/Ranges: X-Axis(column) 40" Range. Centerline of B-Axis to Centerline of Spindle: +/20" Y-Axis(spindle carrier) 60" Range. Top of Pallet to Centerline of Horizontal Spindle: 0" to 60" Range. Top of Pallet to Gage Line of Vertical Spindle: 12.5" to 47.5" Z-Axis(table) 62" Range. Centerline of B-Axis to Horizontal Spindle Gage Line: 12.5" to 49.5" Range. Centerline of B-Axis to Centerline of Vertical Spindle: 0" to 62" Pallet Size: 31.5" x 31.5" Spindle Drive Motor: 30 HP(continuous operation) 40 HP(30 min. operation) Spindle Speed Range: 20- 4.000 RPM Taper Size: No. 50 Feed Rates(X. Y& Z-Axes) 0.5 to 150 ipm Rapid Traverse Rat
$
7,895
Buy It Now
$0 Shipping
Condition: New
Location: Ontario,CA,USA
$
3,749.99
Buy It Now
$0 Shipping
Condition: New
Location: Pittsburgh,PA,USA
$
2,950
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Azle,TX,USA
$
8,250
Buy It Now
$0 Shipping
Condition: Used
Location: New Berlin,WI,USA
$
2,000
6d 15h 45m 31s
0 bids
$0 Shipping
Condition: Used
Location: South Bend,IN,USA
This is without a doubt the cleanest. Best operating Hurco KM3P CNC Vertical Knee Type Milling Machine we have seen since 2001. It is exactly as we received ... moreit. We did nothing to this machine except wipe it off. Just look at those photos. It has only 14,546"on time" hours Now for sale and available for your inspection at our warehouse in beautiful downtown Miamisburg. Ohio is this"EXCELLENT" Hurco Model KM3P Vertical Knee Type. CNC Milling Machine, S/N KDB-8005109E, complete with Hurco Model Ultimax II Dual Screen 3 Axes CNC Controller. The 14" X 36" Sub Plate will go with this machine. You just can't go wrong with this machine. This machine tool was built in the USA. Specifications for this machine are as follows: HURCO(3) AXIS CNC KNEE TYPE VERTICAL MILLING MACHINE MODEL: KM3P. S/N: KDB-8005109E, NEW 1990 TABLE SIZE. 14" X 38" T-SLOTS. 3 X 0.625 ON. 2.95 CENTERS TABLE LOAD. 750 LBS. X-AXIS TRAVEL(LONGITUDINAL) 24 Y-AXIS TRAVEL(CROSS TABLE) 14 Z-AXIS TRAVEL(QUILL) 5 KNEE TRAVEL(MANUAL) 15.5 RAM TRAVEL. 14 LOW. 60-499 RPM HIGH. 500-4.000 RPM TRANSMISSION 2-SPEED BACK GEAR WITH MANUAL CHANGE SPINDLE NOSE TO TABLE DISTANCE. 17.25(MAXIMUM) TAPPING CAPACITY. 7/8 DRILLING CAPACITY(MILD STEEL) ¾ MILLING CAPACITY(MILD STEEL) 2.5 CUBIC INCHES/MINUTE MAXIMUM CUTTING FEEDRATE. 150 IPM RAPID FEEDRATES. 0.1-250 IPM APPROXIMATE MACHINE WEIGHT. 3.800 LBS. APPROXIMATE DIMENSIONS. 101 X 111 X 83- ULTIMAX II DUAL SCREEN CNC CONTROL- UNIVERSAL#200 KWIK-SWITCH SPINDLE*
$
3,195
Buy It Now
$235 Shipping
Condition: New
Location: Missoula,MT,USA
$
9,400
Buy It Now
$0 Shipping
Condition: Used
Location: Converse,TX,USA
Made by Excel Machine Tools. This is a used CNC Vertical Machining Center in GREAT condition. Model# 510-COLT Features: Fanuc Series O-M Control. 16-Position ... moreAutomatic Tool Changer. Coolant System. RS-232 Port. CAT40. 6,000 RPM spindle. Specifications: Table: Table Working Surface Area: 27.56" x 16.54" T-Slots: 3@ 5" centers Travels: X-Axis: 20.08" Y-Axis: 16.14" Z-Axis: 18.11" Spindle: Distance Between Table Top Surface and Spindle Nose(minimum/ maximum) 5.31" 23.43" Distance Between Column Ways and Spindle Center: 16.14" Spindle Taper: CAT40 Spindle Speed Command: 1 RPM(directly programmable by 5-digit S code) Spindle Speeds Range: 150 to 6.000 RPM Movement Rates: X and Y Axes Rapid Traverse Rate: 708.66 ipm Z-Axis Rapid Traverse Rate: 551.18 ipm Cutting Feed Rate: 0.004 to 157 ipm Automatic Tool Changer: Tool Selection System: Random Bi-Directional Number of Tool Positions: 16 Maximum Tool Diameter: 3.74" 5.91" when the next position is empty) Maximum Tool Length: 9.65" Maximum Tool Weight: 13.2 lbs. 123.5 lbs total) General: Electrical: 220 Volt. Three Phase Overall Dimensions: 77" x 98" x 105" tall
$
2,299.99
Buy It Now
$0 Shipping
Condition: New
Location: Pittsburgh,PA,USA
$
2,950
Buy It Now
$0 Shipping
Condition: Used
Location: Manassas,VA,USA
$
1,600
8d 20h 35m 3s
0 bids
$0 Shipping
Condition: Used
Location: Chandler,AZ,USA
$
3,199
Buy It Now
Free Shipping
Condition: Used
Location: Waterbury,CT,USA
Bridgeport Series I Variable speed Vertical Milling Machine- Year 1996 Table: 9" wide x 48" Long Motor: 2 Hp. 3 phase Speed Range: Low range ... more60-500 RPM. High range 500-4200 RPM Includes: Digital Read Out. X-Axis and Powerfeed Great running condition SELLING AS IS BUYER IS RESPONSIBLE FOR ALL SHIPPING AND RIGGING COSTS
$
7,599.99
Buy It Now
$0 Shipping
Condition: New
Location: Pittsburgh,PA,USA
$
3,500
Buy It Now
$0 Shipping
Condition: Used
Location: Stratford,CT,USA
$
3,000
Buy It Now
$0 Shipping
Condition: Used
Location: Plainville,CT,USA
$
3,200
Buy It Now
Free Shipping
Condition: Used
Location: Millstadt,IL,USA
$
5,750
Buy It Now
$0 Shipping
Condition: Used
Location: Roanoke,VA,USA
$
3,495
Buy It Now
Free Shipping
Condition: Used
Location: Providence,RI,USA
$
5,700
Buy It Now
$0 Shipping
Condition: Used
Location: Webberville,MI,USA
$
4,900
Buy It Now
$0 Shipping
Condition: Used
Location: Oakland City,IN,USA
$
3,750
Buy It Now
Free Shipping
Condition: Used
Location: Pomona,CA,USA
$
12,500
Buy It Now
$0 Shipping
Condition: Used
Location: Fort Collins,CO,USA
$
3,499.99
Buy It Now
Free Shipping
Condition: Used
Location: Watertown,CT,USA
This has never been used. Still has plastic film covering the display. Has some surface rust on clamps and a little dusty from just sitting around for ... moreawhile. Just put the battery in it and powers up and works the full length of the travel. Will make a nice addition to any vertical mill or possibly drill press.
$
4,000
Buy It Now
$0 Shipping
Condition: Used
Location: Paso Robles,CA,USA
$
2,499
Buy It Now
$0 Shipping
Condition: New
Location: La Vergne,TN,USA
Jet 350018 Model JMD-18 15" Milling/Drilling Machine Milling/drilling machines, One-piece cast iron column for added support, Belt cover quick slide ... morelatch allows faster belt adjustment to change spindle speeds, Base taper allows for easier clean-up, Larger hand wheel knobs, UL Listed motor, Extra large worktable, Heavy-duty tapered roller bearings support the spindle. Resulting in greater tolerance and more accurate drilling depth, Part Number: 350018, Number of Spindle Speeds: 12, Spindle Taper: R-8, Quill Diameter: 3" Max Distance Spindle to Table: 18" Table Longitudinal Travel: 24" Table Cross Travel: 7" T-Slots Number and Size: 4 and 5/8" T-Slot Centers: 1-13/16" Drilling Capacity: 1-1/4" Face Mill Capacity: 3" End Mill Capacity: 3/4" Swing: 15-7/8" Column Diameter: 4-1/2" Quill Travel: 5" Range of Spindle Speeds: 150- 3.000 RPM, Table Size: 9-1/2" x 31-3/4" Base Dimensions: 15-3/4" x 23-3/4" Motor: 2 HP. 230 Volt only, 1 Phase, Model Number: JMD-18, Brand: Jet, Overall Dimensions: 43"x40"x44" Weight: 739 pounds, One-piece cast iron column for added support, Belt cover— quick slide latch allows faster belt adjustment to change spindle speeds, Base— taper allows for easier clean-up, Larger hand wheel knobs, UL Listed motor, Extra large worktable, Heavy-duty tapered roller bearings support the spindle. Resulting in greater tolerance and more accurate drilling depth, New positive quick-stop knob and easy-to-read internal depth gauge(external on JMD-15) 360° head swivel, Heavy-duty power downfeed with manual fine feed(JMD-18PFN) Three power down feeds(JMD-18PFN.004" 007" 01" Worklamp, Adjustable carbide facemill, Drill press angle vise, 1/2 drill chuck. Chuck arbor, Draw bar, Jet 350018 2 HP. 1 Phase Mill Drill,
$
2,200
Buy It Now
$0 Shipping
Condition: Used
Location: Crows Landing,CA,USA
Claussing Kondia cnc mill with dynapath controller. 1995 model came out of prototype shop and has very few hours.And is in great condition. Included if ... moreyou buy soon is a 4th and 5th axis manual turntable. Also if you buy soon we will include 3d cad software for generating programs. If your new to cnc milling this is a great 1st machine it will fit in a garage and can run on a small rotary phase converter. If you have a project in mind for it we will help you program and set it up and run the first parts. Upgraded to lcd screen and new main power supply If you dont like the price we are negotiable but not easy. Call us with questions or if you need more pictures or info. We can also send some vidios of it running. 602-740-6231 cell 623-566-5302 shop Location: Peoria, Buyer responsible for freight. We can load it on a truck or trailer for no charge, You can come and inspect and test run machine.
$
4,500
Buy It Now
Free Shipping
Condition: Used
Location: Dayton,OH,USA
$
2,500
Buy It Now
Free Shipping
Condition: Used
Location: Watertown,CT,USA
This is a used Bridgeport 1 HP vertical milling machine. This machine is working just fine but has a bit of slop in the ways. Power feed does not work. ... moreWorks great for many applications. when i need accurate milling I dont use this machine. Quill is a tight and does not return automatically. I haven't used the quill feed in 15 years and don't know how. So i don't know if it works. Machine is sold"as is" and is local pick up only. I have a forklift and can load on your truck or trailer from the ground or from a dock. This machine will not go into back gear. I dont know why and dont have time to work on it. You are buying it as is. It works fine in forward or reverse in high gear. I have only cut aluminum and wood and have never needed back gear. Posted with
$
2,649.99
Buy It Now
$0 Shipping
Condition: New
Location: Pittsburgh,PA,USA
1 2 3 4 5 6 7 8 9 10 11
 In 

Past Items  
 
Relist this item buyer mistakes order. please becafully offer this item. thanks. Roland MDX-20 Scanning and Milling Machine In Good Working Condition Include: Roland Mdx-20.Serial Cable(9pin female TO 25pin male)Software(Modela Player 4) Not Include: Scanning Head Not Include: Samsung P29 Labtop Because Shipping Becareful. If need this labtop,i will Shipping this labtop( Samsung Sens P29.This is labtop old spec,Pentium M celeron 1.5,512 RAM,Hdd 160G) Detail Spec:Samsung P29: go to samsung website Installed Windows XP(korea Language) I do not accept Returns Sold AS-IS See Movie. See Pictures and More Details Posted with
Item for sale is(1) Bridgeport Milling Machine Knee Crank Handle. The handle is USED. But in Excellent/Like New Condition. It is made of cast iron. Shipped FREE in the USA. There is no charge for local pickup in South St. Louis. MO. Please feel free to ask questions! Please check out my other auctions for more tools and other surveying items! Thanks!
I am really not sure what this tool is. I assume it is a machinist type tool. It looks like it mounts on a drill press or some kind of milling machine with very fine handle operated adjustments. This is a small device. It measures just 6" from end of block to end of handle. The only marking I see is the number 92 that is stamped on the one piece.
Ebay Base This auction is for 2 Precision ground and hardened Vee-Blocks model № 271 made by L.S. Starrett. USA. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
Kalamazoo 5C indexing fixture.Good condition.someone painted it red but it's in good condition.has a 24 index in and a 5C collet.Good for milling machine,surface grinder and tool grinder as well as other machines.no international
aims U.S.A! ELLIS 5" MILLING MACHINE VISE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Ellis Tool. This is a Milling Machine Vise in good condition. Features: Hardened vise bed. Semi-hard steel screw. 80.000-PSI ductile iron body. Specifications: Jaw Width: 5" Jaw Height: 1-3/4" Max. Opening: 4" Overall Dimensions: 16-1/2" x 7-1/2" x 3-1/2" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! ELLIS 5" MILLING MACHINE VISE U.S.A! ELLIS 5" MILLING MACHINE ... moreVISE U.S.A! ELLIS 5" MILLING MACHINE VISE Reliable Tool Inc. c 2011 | Powered by 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-13e12b59f0f-0xf4-
Description: MILLING MACHINE SERRATED HEAL STEP BLOCKS SET OF 2 3-3/4 x 2-1/4 x 1 ONE OF THE BLOCKS IS AN"ENCO" USED; MAY SHOW SIGNS OF USE; SEE DAMAGE SHOWN IN PHOTO#5 IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns ... moreare accepted if item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are
Description: MILLING MACHINE HOLD DOWN HEAL BLOCK SETUP SERRATED SET OF 2 5-1/2 X 3-1/4 X 1-1/2 USED; MAY SHOW SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as described in our ad. We ... moremust be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless state
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number: 25887. BRIDGEPORT VERTICAL MILLING MACHINE MODEL: Series I SERIAL NUMBER: 200794 GENERAL SPECIFICATIONS Table Size: 9" x 42" Longitudinal Travel: 30" Cross Travel: 12" Knee Vertical Travel: 16" Ram Travel: 12" Quill Travel: 5" Spindle Taper: R-8 Spindle Speeds. Variable: 60 to 4200 RPM Feeds: 3) 1.5. 3, 6 IPR Head Swivel(Right/Left) 90 Degrees Head Tilt(Up/Down) 35 Degrees EQUIPPED WITH 2 HP Spindle Motor. 220/440/60/3 One Shot Lube Approximate Weight: 2000 Lbs. F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous ... moreto end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of
Description: Atlas Mill Milling Machine Original Aluminum Side Guard Stamped M1-402B alongwith the correct hinge stamped M1-404 as pictured. Came off a MFC mill. Solid with no cracks. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 ... moreDay Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
LOTS OF AUCTIONS ONLINE NOW! Brand UTD Packaging None Condition Excellent Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
ATLAS MILLING MACHINE COMPLETE CHANGE-O-MATIC ASSEMBLY GREAT MECHANICAL SHAPE Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge ORIGINAL MF-28X CHANGE-O-MATIC ASSEMBLY. GREAT MECHANICAL SHAPE. EXCELLENT GEARS. T URNS SMOOTHLY AND HAS NO DAMAGE OR REPAIRS. GOOD READING RPM/FEED LABEL THROUGH WINDOW. JUST PAINT. BOLT AND GO. FROM MODEL MFC MILLING MACHINE. MANY FINE PARTS FROM THIS MACHINE TO BE LISTED. THANKS. AND SEE MY EBAY STORE WITH OTHER MILL AND LATHE PARTS AND AUCTIONS. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
SIXIS UNIVERSAL MILLING MACHINE MADE IN SWITZERLAND MODEL S 101 INCLUDES SWIVEL TABLE WITH DIVIDING FIXTURE, SUPPORT FOR HORIZONTAL MILLING. LEVERS. SPINDLE SPEEDS 1000- 2000-3000 RPM. TRAVELS: X-150 MM. Y- 150 MM, Z- 100 MM. VOLTAGE 220 VOLTS 3 PHASE 50/60 HZ.
good used nmtb 50 taper- 2 1/2" center plug Fansteel Wesson USA 1" drawbar thread FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
DECKEL UNIVERSAL MILLING MACHINE MADE IN GERMANY. YEAR MANUFACTURING 1986 MODEL FP4M. SER.17391, TECHNICAL DATA: WORKING RANGE. X AXIS(LONGITUDINAL)490/500 MM. 20" Y AXIS 9TRANSVERSE) 390/400 MM.16" Z AXIS(VERTICAL) 385/400 MM. 16" QUILL STROKE. Z AXIS 90 MM. 3 1/2" MAIN DRIVE. POLE-CHANGING 3-PHASE AC MOTOR WITH BRAKE AND CHANGE SPEED TRANSMISSION FOR CW/CCW ROTATION. POWER RATING(100%60% DUTY RATING) 3.7/ 4.4 KW MOTOR SPEEDS 1425/ 2890 RPM 18 SPINDLE SPEEDS 50- 2500 RPM SPINDLE TAPER ST 40(M16) FEED DRIVE. POLE CHANGING 3-PHASE AC MOTOR WITH SPEED-CHANGE TRANSMISSION POWER RATING(100% 60% DUTY RATING 0.8/ 1.2 KW MOTOR SPEEDS 1420/2780 RPM 18 FEED RATES 8- 630 MM/MIN(5/16-25 INCH/MIN) RAPID TRAVERSE RATE 1300 MM/MIN( 52"MIN) OPERATING VOLTAGE 380 VOLTS 3 PHASE. 9.5 KVA MACHINE WEIGHT APPROX. 1450 KG(3200 LBS)
DECKEL UNIVERSAL MILLING AND BORING MACHINE MODEL FP2. SER# 45193 INCLUDES SWIVEL ANGULAR TABLE WITH 5 SLOTS 700 X 240 MM. VERTICAL SPINDLE HEAD. OVERARM WITH SUPPORT FOR HORIZONTAL MILLING, HIGH SPEED VERTICAL MILLING HEAD. MACHINE VICE, COLLETS TAPER# 40. COLLETS 200 MM. SHANK, ARBORS, ADAPTORS, SLEEVES, ORIGINAL OPERATOR'S MANUAL AND SPARE PARTS MANUAL. TECHNICAL DATA: DRIVE MOTOR WITH BRAKE 2.2 KW(3 HP) 1420 RPM, SPINDLE SPEED 18. SPEED RANGE 40.2000 RPM, FEEDS 18. FEED RANGE 8.400 MM.MIN(5/16. 16 IPM) RAPID TRAVERSE RATE 1200 MM.MIN(48 IPM) RANGES OF TRAVERSE: LONGITUDINAL(TABLE SLIDE) POWER/HAND 390/400 MM/MIN(15 3/8" 15 3/4" TRANSVERSE(HEADSTOCK) POWER/HAND 190/200 MM/MIN(7 1/2" 7 7/8|" VERTICAL(KNEE) POWER/HAND 390/400 MM/MIN( 15 3/8" 15 3/4" VOLTAGE REQUIRED 220 VOLTS 50/60 HZ 3 PHASE. WEIGHT OF ... moreTHE MACHINE WITH ELECTRIC PANEL 1095 KG(2400 LBS)
BE SURE TO LOOK AT ALL PICTURES YOU MUST CLICK FIRST TO SEE THE REST USED/ WORKING TAPMATIC TS-8 TAPPING SPINDLE Maxium capacity 1-1/8" M28- SHIPPING DETAILS- Shipping is calculated by ebay/ Canada post see details at top. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. CHECK OUT OUR EBAY STORE BY CLICKING THE LINK ... moreBELOW DANDRMFG EBAY STORE
LOT OF CLARKSON AUTOLOCK
BRIDGEPORT MILLING MACHINE HARTFORD SUPER TABLE TILTING + SWIVELING, HARTFORD SPECIAL"SUPER TABLE" 360 DEGREE ROTATION HORIZONTAL + 10 DEGREES TO VERTICAL + 10 DEGREES FEW SMALL REPAIRS TO TABLE SURFACE WON'T AFFECT USE. UNIT WEIGHT IS 110# WILL SHIP UPS IN WOOD CRATE. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e138f7ed2-0x102-
South Bend Lathe. Chipmaster II, Vertical Milling Machine. EVS Head, 5 HP Drive Motor, 208/230/460V, 3 PH, 10 x 50" Table size. Head Tilt +/ 45 degrees. 5"27" distance spindle column. Email me at
Grandpa's Secrets Discover a Wealth of How-to Projects& Plans from a Bygone Era. Explore our Scientific& Mechanical History in Vintage Hobby. Craft, Technical Magazines. grandpas_secrets Store for lots more great Items. Milling Machine Table attachment for small Metal Lathe How-To build PLANS With this attachment you can turn your lathe into a milling machine. Made from a common angle plate. Handy for the small shop needing a milling machine at times. Mounts on the compound. Replacing the tool post. Made almost entirely on the metal lathe, This is an original 2 page magazine article from 1972. We do not photocopy these. Article Includes Measured Drawings and Diagrams, Instructions, SHIPPING TERMS: Buyer to prepay and add- Multiple Wins may be grouped to save on shipping. $2.00 for USPS first class mail service or, $5.25 for priority ... moremail service. Add $1.75 to total if you would like insurance with delivery confirmation. $8.00 for shipping to Canada. $10.00 other International shipping Payment: by Paypal. Visa and Mastercard accepted thru PayPal. Items shipped upon receipt of Paypal payment. CHECK OUT OUR OTHER AUCTIONS. Listing created with from Black Magik Software.
8" ROTARY TABLE BRIDGEPORT MILLING MACHINE NICE CONDITION, ROTARY TABLE LOOKS LIKE A SMALLER VERSION OF BRIDGEPORT ROTARY TABLES. NO TAG FOR MFG INFO PROBABLY IMPORT. NICE CONDITION. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
BRIDGEPORT MILLING MACHINE GENUINE 15"ROTARY TABLE XLNT, GENUINE BRIDGEPORT ROTARY TABLE IN EXCELLENT CONDITION AS SHOWN WITH A FEW OPS IN TABLE. $50.00 CRATING CHARGE IN ADDITION TO ACTUAL FREIGHT CHARGES*EMAIL OR CALL 845-691-4140 MATT FOR SHIPPING QUOTE* Payment I accept the following forms of payment: PayPal Shipping& Handling Freight- Check item description or contact seller for details. Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
Made in USA drill bit set high speed steel. See pics for best description. Set is missing 31/64 all others are present. Not all are matching but there are 28 bits in their respected places. Posted with
aims KURT 6" ANGLOCK MILLING MACHINE VISE- D60 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Kurt Manufacturing Company of Minneapolis. Minnesota. This is a'Ang-Lock' Milling Machine Vise in good condition. The original Kurt Anglelock D-Series Vises are the best for precision part clamping on machine tools such as knee-type mills. Grinders, and machining centers. Model# D60 Features: AngLock design assures the movable jaw does not lift. Hardened vise bed. Semi-hard steel screw. 80.000-PSI ductile iron body. Specifications: Jaw Width: 6-1/8" Jaw Height: 1-3/4" Max. Opening: 5-1/2" Overall Dimensions: 18" x 9" x 4-3/4" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call ... moreor email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KURT 6" ANGLOCK MILLING MACHINE VISE- D60 KURT 6" ANGLOCK MILLING MACHINE VISE- D60 KURT 6" ANGLOCK MILLING MACHINE VISE- D60 Reliable Tool Inc. c 2011 | Powered by
3/4-10- 4) 4-1/2" studs. 4) 5" studs, 4) t-slot nuts(one is marked TN-813 TIETZMANN TOOL CORP) 6) flanged nuts, and 1) regular hardened nut-19 total peices
4" Machine Machinist Milling Vise. Excellent Used Condition Please look at the pictures and judge the condition of this item for yourself as our photos are a large portion of our description and what you see is what you get! If you have any questions please ask before you purchase this item and i will answer them promptly(usually within an hour) We are human and sometimes make mistakes so if there is a difference between the descriptive text and the photos. The photos will be considered the correct information I do combine shipping on everything I sell. SHIPS FROM CHICAGO THE SAME DAY AS PAYMENT! CHECK OUT MY GREAT FEEDBACK IMPORTANT- YOUR SATISFACTION IS OUR NUMBER ONE GOAL. IF YOU FEEL WE DON'T DESERVE POSTIVE 5 STAR FEEDBACK IN ALL CATEGORIES FOR ANY REASON PLEASE CONTACT US BEFORE YOU LEAVE YOUR FEEDBACK SO WE CAN(AND WE WILL) ... moreRESOLVE ANY ISSUES YOU MIGHT HAVE. IMPORTANT FEEDBACK INFO- EBAY HEAVILY WEIGHTS LOW 1 OR 2 STAR DSR RATINGS(DETAILED SELLER RATINGS) AGAINST SELLERS AND IN SOME INSTANCES IT CAN BE EQUIVALENT TO LEAVING AROUND 8 NEGATIVE FEEDBACKS PER 1 LOW DSR. A 3 STAR RATINGS(OUT OF 5 STARS) IS NOT WEIGHTED BY EBAY IN THE SAME WAY. WITHOUT THIS INFORMATION WE FEEL BUYERS CAN'T HONESTLY AND KNOWLEDGEABLY RATE SELLERS. WE FEEL BUYERS MIGHT INAVERTANTLY LEAVE HARSHER POSITIVE OR NEGATIVE FEEDBACK THAN THEY REALIZED BY NOT KNOWING THE RATING SCALE THAT EBAY APPLIES TO THESE RATINGS. Please bear in mind that shipping charges encompass more than just postage. We have to pay for the packing materials. Boxes& mailers, paper& ink for the printer, gas, etc. Shipping charges increase a great deal when a package exceeds 13 ounces domestic and over 4 pounds internationally. You can see the shipping charge before you buy and i always try only to charge actual shipping costs.If you do not feel that you cannot give me a five star rating on shipping charges please contact me BEFORE you buy! Thank you! For international buyers please be aware that we are not responsible for customs fees added by
14" LATHE MILLING DRILL DRILLING MACHINE CROSS ROTARY TURN TABLE WORKHOLDING. 14" WORKHOLDING ROTARY TURNTABLE This listing is for 1 used item in good general condition. This heavy duty piece of equipment is made to last a lifetime in professional. Commercial, and industrial applications like milling and drilling. The workholding has a round 14" diameter surrounded by a 1-3/4" debris-catching lip moat. Cross slides are 1/2" wide on top for 1/2" deep and then widen to 1" for 1/4" deep. Entire assembly is about 21" long overall. Base mounting bar opening is 1-1/4" wide lip and then opens in a oval shape to 1-3/4" at its widest. Operates via a manual crank handle. Don't miss your chance to own this solid, heavy duty turntable today! See pictures for more details and information of condition ... moreand please make sure that this is the part you need before purchasing. As it is a non-returnable item. Thank you. Due to size and weight. We prefer a local pickup here in Rhode Island. Inspections during normal business hours are always recommended before purchasing. Local sales tax must be charged on all local pickups. If the buyer makes all the necessary arrangements for prepaid freight shipping with supplied bill of lading. We will be happy to accommodate this. We can also palletize and shrink wrap this for an additional freight preparation fee of typically $50.00. a PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We will not ship to unconfirmed or unregistered shipping addresses, we also will not ship to third parties. Intention of payment should be made within 24 hours of winning an auction. Identification may be required and cleared funds approved before picking up items in person. SHIPPING: We ship using USPS Priority mail and UPS ground. We only use UPS and USPS Priority shipping services for ground shipping at this time as they provide shipping or tracking numbers as proof of
Nichols Horizontal Hand production Milling Machine. Leaver opperated Table& Head, Great for Slotting. Comes with the Arbor& Arbor Support, Electric is 3 Phase, Real nice Machine. Free Skidding, Shrink wrapped& loaded on Buyers Truck from Pa zip Code 18966. Buyer pays all shipping costs. Compare. What a deal.
Description: Atlas Craftsman Mill Milling Machine Ball Crank Arbor Bar Lock Handle Assembly off a Atlas MFC Mill. This knob has been machined out and a brass insert pressed in and pinned. Also the ball knob handle has some sort of grind marks on it as pictured. I think the retired machinest this came from had to much time on his hands and he liked to personalize his machines. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used ... morewhenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
Working vintage milling machine from Singer Sewing Machine Factory. Extremely heavy for its size(or any size) Belt driven- put a motor on it and it will go forever. Three bed levels including top vise which I took off in one of the photos. Middle vise sits on circular rotating mechanism. Then one below that simply back and forth. Head with top large pulley adjusts up and down in dovetail slot. Pick-up or freight.Call 207-943-5671 or email regarding purchases or questions. If you want your item in a hurry please let me know. Thanks.
MILING MACHINE HOLD DOWN& HARDWARE Used Clamp cart 8-T nuts 7/8" 3-T nuts 1" 2-T nuts 3/4" 2-T nuts 3/4" 60 nuts 7/8" 30 washer nuts 7/8" 10 nuts 1" 10 HD nuts 7/8" 5- full threaded 20 3/4" 7/8" 1- full thread 16 3/4" 7/8" 1- full thread 16. 7/8" 1- full thread 25 1/2. 7/8" 1- full thread 22 1/4. 3/4" 4- 1/2 + 1/4 threaded 8" 7/8 2 1/2 + 1/4 threaded 11 3/4. 7/8 7- 12" clamps 5- 9 1/2" clamps 2- 10" forks 5- 11" forks 1- 12 1/2" horseshoe fork clamp 1- 10" horseshoe fork clamp 1- 8" horseshoe fork clamp 2- 1" thread size eyelets 2- 7/8" thread size eyelets Assortment of odds& ends not listed 3- threaded end 23 3/4" length. 7/8" thread size 2- threaded end 18" 7/8" 3- threaded end 4" ... more7/8" 2- threaded end 4 1/2" 7/8" 2- threaded end 5 3/8" 7/8" 6- threaded end 5" 7/8" 9- threaded end 7 1/2" 7/8" 5- threaded end 8" 7/8" 5- threaded end 4" 7/8" 3- threaded end 6" 7/8" 6- threaded end 7" 7/8" 13- threaded end 10" 7/8" 8- threaded end 12" 7/8" 2- threaded end 14. 7/8" 3- threaded end 6 1/2" 7/8" 1- threaded end 22. 7/8" 2- threaded end 18. 7/8" 3- threaded end 24. 7/8" L55"x"W40"H52" Weight: 900 lbs. As is Question please call 517-294-8737 Check out my! Shipping Item is located in Howell Michigan. Great pick up item. For a freight quote please send me your zip code and state if its a business address with a way to unload a semi trailer or residential address and you need a lift gate. Buyer pays all shipping expenses. Thank you Return Policy Within 14 days after recieving this item and if you believe that I misrepresented it. Please email me to set up a return. All return feight will be payed by the buyer and it must be returned in the same condition that it was shipped. Thank you Liability Seller makes no claims
Gold International Machinery Corporation | Bridgeport Model BR2J Vertical Turret Milling Machine 1.5HP Our Inventory Number: 6773-470 Technical Specifications: 230V/3PH/60HZ, 1.5HP Motor, S/N 144464, Year of mfg: 1972, Table size: 9" x 42" Longitudinal table travel: 30" Cross travel: 12" Vertical travel of knee: 16" Vertical capacity: 0- 18" Throat size: 6-3/4" minimum to 18-3/4" maximum, Spindle: R8 taper, Drilling capacity: 3/4" manual/ 3/8" power feed, Quill travel: 5" Spindle speeds: 60- 4200 RPM(variable) Overall dimensions: 76"w) x 63"d) x 77.5" high, Estimated weight: 2130 lbs. Equipped With: Brand new Set(11) R8 collets Brand new Set of hold downs One shot lubrication system, This item is in very good condition! We can palletize. Cover and load this item for an ... moreadditional $245. We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment
good used swivel base for 6" mill vise no mfg marked 1" center pin x 8" bolt circle please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
good used 4" mill vise Enco 525-7241 china please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
Description: Here's a Atlas Mill Milling Machine Headstock Assembly with the Drive Gear M1-100-32A. This is a real clean and smooth running unit. Only thing I see wrong is the chart is messed up as shown in the pictures. This auction is set up to ship this unit via USPS Parcel Select which is slow. If you want it fast and want to pay the extra shipping then you need to select Priority Mail when you checkout and pay. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks ... moreShipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
nice precision dividing head
LOTS OF AUCTIONS ONLINE NOW! Brand Burke Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Missing nut and some spacers. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13e15213acb-0xfc-
1 HP 3 PHASE POWER FEED ON TABLE POWER FEED ON QUILL COMES WITH R8 COLLETS ENDMILLS
This auction is for a Pair of I-Beam style steel parallel blocks They are in a very good used condition with few dings and the initials of the previous owner on the small"I" edge Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show same items from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment. o.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpl%7E3go7%3Eo-13e160d2620-0xfc-
Condition: Good used condition. Surface rust, sharp edges.5042 oiler nice old piece Please ask any and all questions prior to auction close as this item is sold a s is with no warranty or returns. Feedback. WE WANT POSITIVE FEEDBACK- Feedback left after feedback received! Did you know? On eBay. A NEUTRAL feedback rating is treated exactly the same as a NEGATIVE feedback? Please do not leave a negative or neutral feedback without contact from us to help resolve any issue! We are committed to satisfaction of your purchase. If you are not satisfied with your purchase in anyway please give us an opportunity to make it right before leaving feedback. You may ask a question through ebay's contact a seller section. CUSTOMER SERVICE all out of country bidders please ask about the cost of shipping to your country
THE ADJUSTA VISE G&W MACHINING 6" MILLING MACHINE KURT STYLE ADJUSTABLE JAWS Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Not sure about the maker of the unit but looks like the kurt vise. The jaws are marked The Adjusta Jaw G&W machining company Corona Ca. The top of jaws max height is 2 1/2" and about 1" travel. The vise is 6" wide and opens to about 4 3/4" Without the adjustable jaws it is about 7 1/4" 360 degree swivel in 5 degree marks. It is in excellent condition with very light use. No hammer marks. The jaws look great and work fine. No other tags but I do ... morebelieve it is USA made. No crank or handle. Shipping weight is about 115 lbs. It will get boxed and shipped safely and promptly. Due to the spam blockers by various ISPs some of our emails get returned. If no emails are received from us or from Ebay at the end of auction. Please check your email settings and verify that you can receive emails and make sure that Your Ebay contact info. is current. Also our Ebay Contact info is current and can be optained by auction winner through the Ebay web site. SHIPPING We try to ship in a day or two upon receipt of payment. Please email if item is not received within ten days after receipt of payment. 1)All items will be shipped with UPS ground unless otherwise indicated in item description. Our zip code is 90501. for. AFTER THE AUCTION An automated end of auction email will be sent that includes all relevant auction informations. Our information and a link to a form to be filled up by the winning bidder including method of payment chosen. Response to this email is requested to facilitate processing of sale. 9.75% California sales tax applies to all California residents and must be included with payment Payments Payment I accept the following
BURKE MODEL B-4 Horizontal Milling Machine with over 75 cutting tools and vertical head attachment. The motor cover has a Brass oiler attached to it. Pretty Cool) Lamp seems to be Brass also. This milling machine does work. And is being sold as is. Item is located near Chicago. IL. Once purchase is made, all details will be provided. If you have questions, please ask. Check my feedback and purchase with confidence. Shipping cost includes Insurance and custom made pallet. If you choose to pick it up yourself. Shipping is free of course. In order to ship this item on a pallet via freight truck. I will need the following information from you: Commercial or residential? Do you have a loading dock or fork lift? Inside delivery? Do you require the carrier to notify you prior to delivery? What is your full address· No International Shipping. ... moreI will ship to the Continental United States only. I will email you pictures of palletized item prior to shipping upon request. It is your responsibility to inspect shipment before signing for and accepting item. If your item arrives in any condition other than what is shown to you in the pictures. It will be your responsibility to file a claim. If there are any other special circumstances. It is your responsibility to inform me before shipment. I will need about 7 days to prepare machine for shipment.
Fein RMO 5A Pipe Milling Machine. This is an older model. Newer ones run $40,000! Comes with everything shown including the Fein metal tool box. Wood job box, chain, wrenches, and assorted tooling. It's here to sell so make an offer if you need to cut large pipe. Pick up for free or call me at 574-360-8556 for a shipping quote. Paypal for payment. Click on the videos to see and hear it run.
This auction is for one emco electric vise for an emco milling machine. These were used on several emco machines that were assembled into automated cells. There is some surface rust on the vise jaws. A voltage is applied to a gear reduced electric motor. Which clamps the part. Very simple. This vise sold for a couple thousand new. The really nice thing is that it bolts right to an emco machine table and gives a very large workpiece gripping capacity. Save some big money here on this very rare item. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13e169673f1-0xf7-
GOOD SHAPE.
BE SURE TO LOOK AT ALL PICTURES USED/ WORKING TAPMATIC SPD-7#10- 5/8" 7/8" straight shank ball lock adapter for 5/8" tap- SHIPPING DETAILS- Shipping is calculated by ebay/ Canada post see shipping details at top. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. CHECK OUT OUR EBAY STORE BY CLICKING THE LINK ... moreBELOW DNRMFG EBAY STORE
Title: 40 Taper Swivel Milling Head off of a Maho MP 600 P Milling Machine. Used Description: Our Internal Stock# 1-18-13 dale) You are about to purchase the following item: 1- 40 Taper Swivel Milling Head off of a Maho MP 600 P Milling Machine. Used#40 Taper in Spindle Swivel Head 0.12- 0,02- 0,06 mm/per rev of Spindle Power Feed on Quill 80mm Quill Travel. Manual Clamping. Complete w/ Bracket for Mounting Unit was driven from Horizontal Milling Spindle of Machine NICE CLEAN UNIT. MADE IN GERMANY THIS ITEM WAS TAKEN DIRECTLY OFF OF A MAHO MP 600 P HORIZONTAL MACHINE. MACHINE WAS IN GOOD WORKING CONDITION WHEN WE DISASSEMBLED. Serial# 62219 WEIGHT FOR SHIPPING: Skid size: 30" x 36' x 24" H/ Class 70. This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 day return privilege on this ... moreitem if found defective(freight prepaid by buyer) We will either replace item or refund money if found inoperable. Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. We can get this item shipped very affordably in the Continental USA via UPS Ground Freight to a Business location with Lift Truck/ Loading Dock. If item is shipped to a residential or Remote location of course the cost would be more. TO GET AN EXACT QUOTE TO YOUR DESTINATION FEEL FREE TO CONTACT US AT ANY TIME AND WE WILL BE MORE THAN HAPPY TO GET YOU THAT RATE QUICKLY. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! Send us a message if you have a question about sh
LISTING IS FOR A USED MILLING MACHINE SWIVEL BASE FOR VISE BRAND- SWIVEL BASE PART# STUD DIAMETER- 1.250" KEY WAY SIZE- 625" DI STANCE FROM PI LOT TO CENTER OF GROO VE- 3.750" Measurements are approximate GROOVE WIDTH- 698" Mea surements are approximate 360° GRADUATIONS VISE NOT INCLUDED CONDITION- VERY GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING ... moreIF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HAND
See pics of actual tilting angle vice. Posted with
Machining Drill Bits 50 machine shop drills. Some are new, Various sizes too much to list machinist tooling for lathe bridgeport milling machine. Add to your eBay favorites Share on Facebook 0 Add to your eBay favorites Share on Facebook 0 Add to your eBay favorites Share on Facebook 0 | Some may have rust on them please see pictures for more details!
USA original bridgeport COMPLETE BRIDGEPORT MILLING MACHINE KNEE ELEVATING SCREW
SADDLE FAIR USED SADDLE FOR SERIES I BRIDGEPORT MILLING MACHINE. THIS WILL FIT THE AMERICAN BRIDGEPORT MILL. SHIPPING IS CALCULATED. COMBINE WITH OTHER PRODUCTS AND SAVE WITH MULTI ITEM PURCHASES. THANKS FOR LOOKING AND DON'T FORGET THE OTHER QUALITY BRIDGEPORT PRODUCTS IN THIS STORE. SUCH AS REPAIR KITS, REPLACEMENT PULLEYS, AND CLOCK SPRINGS. PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be ... morereceived within 7 business days. Bidders can call 1-888-785-7810 or email for further information. Shipping and Handling Shipping weight: 100lbs. Buyer pays the shipping& handing charge. ALL SHIPPING IS FOR THE CONTINENTAL UNITED STATES ONLY. ALL OTHERS REQUEST QUOTE. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items.
For sale is a used Flex LWW2106VR Edge Milling Machine it is in great working conditions NONE OF MY ITEMS ARE REFURBISHED! Payment: PayPal payments expected within 7 days; if no payment is received the item will berelisted. Only method of paymentis PayPal. Shipping: I will ship your item within 1 business day of receiving cleared payment. I use FedEx and USPS as shipping carriers; when shipped the packages will require a signature upon delivery. Sorry no local pick up. Shipping to Hawaii. Alaska, and Puerto Rico will be extra. Please send mean email to confirm shipping charges. No international shipping! Returns: We accept returns only if the item was not as described in the auction. Buyer must return the item within 10 days; buyer is responsible for return shipping charges. We try our best to present accurate. Detailed information about ... moreevery item we sell. If you have any questions, please email us before placing your bid. Thank you so much for looking at my auction and please do not hesitate to contact me. Should you have any questions* Posted with
Used service manual Posted with
Operator manual Posted with
good used cat 40- 1/2" end mill holder Parlec USA C40-50EM1 FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
good used cat 40- 3/8" end mill holder Parlec USA C40-37EM2 FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
good used cat 40- 1 1/4" end mill holder mfg not marked FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
Item. End Milling machine ToolHolder adaptor Manufacturer. Briney Hole. 2" Shank size. Fifty taper Condition. Nice used. Complete with both set screws and the drawbar threads are in nice shape, ready to use. This is not an actual photo but it is pretty much identical to the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please ... moredo not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395
MILLING MACHINE SPUD ARBOR ADAPTER HOLDER 1-1/4 1" 1-21/32 SPUD DIA 6-1/16 OVER ALL LENGTH INVENTORY#1264 USED ITEM; SHOWS SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping on most items. We do not combine ship discount auction items. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping ... morefees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufactur
Very nice condition. Scuff marks and scratches on the outside but looking at the shank it show no signs of use so probably new. Hole diamter is approx 1.02" and hole depth is 2.2" depth to locking shoulder is 1.2" ship usps prioriity mail small flat rate box.
YOU BIDDING ON A USED CAT40 3/4" HOLDER. NO RUST OR MARKS, SOME DISCOLORING YOU CAN SEE IN THE PHOTOS. IF YOU HAVE A QUESTION, PLEASE ASK BEFORE BIDDING. SHIPPING AND HANDLING IN THE LOWER 48 STATES IS $13.50. I COMBINED SHIPPING.
Cincinatti Milling Machine Arbor Support: Aluminum construction; flat of table to centerline of bushing 7 1/4" widest width of dovetail 5.750" narrowest width of dovetail 4.650" Any questions call Tim@ 412-922-8915
YOU BIDDING ON A ONE USED KWIK SWITCH SERIES 300 WITH 1-1/4" COLLET. IN EXCELLENT CONDITION. IF YOU HAVE A QUESTION, PLEASE ASK BEFORE BIDDING. SHIPPING AND HANDLING IN THE LOWER 48 STATES IS $14.00. I COMBINED SHIPPING.
Ebay Base This auction is for a precision 5/8" end mill holder in a Morse Taper № 2(MT2) shank. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
This is without a doubt the cleanest. Best operating Hurco KM3P CNC Vertical Knee Type Milling Machine we have seen since 2001. It is exactly as we received it. We did nothing to this machine except wipe it off. Just look at those photos. It has only 14,546"on time" hours Now for sale and available for your inspection at our warehouse in beautiful downtown Miamisburg. Ohio is this"EXCELLENT" Hurco Model KM3P Vertical Knee Type. CNC Milling Machine, S/N KDB-8005109E, complete with Hurco Model Ultimax II Dual Screen 3 Axes CNC Controller. The 14" X 36" Sub Plate will go with this machine. You just can't go wrong with this machine. This machine tool was built in the USA. Specifications for this machine are as follows: HURCO(3) AXIS CNC KNEE TYPE VERTICAL MILLING MACHINE MODEL: KM3P. S/N: KDB-8005109E, NEW 1990 ... moreTABLE SIZE. 14" X 38" T-SLOTS. 3 X 0.625 ON. 2.95 CENTERS TABLE LOAD. 750 LBS. X-AXIS TRAVEL(LONGITUDINAL) 24 Y-AXIS TRAVEL(CROSS TABLE) 14 Z-AXIS TRAVEL(QUILL) 5 KNEE TRAVEL(MANUAL) 15.5 RAM TRAVEL. 14 LOW. 60-499 RPM HIGH. 500-4.000 RPM TRANSMISSION 2-SPEED BACK GEAR WITH MANUAL CHANGE SPINDLE NOSE TO TABLE DISTANCE. 17.25(MAXIMUM) TAPPING CAPACITY. 7/8 DRILLING CAPACITY(MILD STEEL) ¾ MILLING CAPACITY(MILD STEEL) 2.5 CUBIC INCHES/MINUTE MAXIMUM CUTTING FEEDRATE. 150 IPM RAPID FEEDRATES. 0.1-250 IPM APPROXIMATE MACHINE WEIGHT. 3.800 LBS. APPROXIMATE DIMENSIONS. 101 X 111 X 83- ULTIMAX II DUAL SCREEN CNC CONTROL- UNIVERSAL#200 KWIK-SWITCH SPINDLE*
Bosch Router Engraver for CNC Bridgeport Quill Milling Machine. Model 90084. 120V, 60Hz, 5.0A, 550W, 30,000 RPM. Includes Adapter Bracket for Bridgeport Series 1 Quill. The router has a 1/4" collet. This auction is for the router and the adapter that fits the quill of a Bridgeport Series 1 Mill. As you can see in the pictures the adapter is very rugged and It can easily be adapted to another CNC mill or CNC router machine with a little ingenuity. The router bit shown in the pictures is NOT included. And of course the mill is not included. This auction is for the router and adapter only. This works great for brass, aluminum, wood, plastic and even steel. I used it to engrave cribbage boards in brass and it did a fine job. I have not used it for a while so it is time to sell it. If you have any questions please email. This is a no reserve ... moreauction. Good Luck Powered by The free listing tool. List your items fast and easy and manage your active items.
aims 1998! ACRAMILL 9" x 49" MULTIPLE SPEED VERTICAL MILLING MACHINE- 16-SPEED read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Acra. This is a used Acramill Vertical Milling Machine in GREAT condition. Model# 100-1949 Serial# 980890 Date of Manufacture: 08.1998 Photos were taken on location. But machine will ship from our Irwindale, CA warehouse. Features: One Shot Lube System. Hand Scrapped Ways. Hardened& Ground Table& Box Ways. Turcite on X& Y ways. Heat treated& hardened Quill. 16-Speeds. Servo Type 140 X-Axis Power Feed. Sargon Prospector Three-Axis DRO. Meehanite Castings. Specifications: Table: Size: 49" x 9" T-slots: 3@ 2.5" centers T-slot Size: 0.625" Travels: X-Axis: 37" 35" with power feed) Y-Axis: 13" Z-Axis(Vertical ... moreKnee) 16" Quill Travel: 5" Ram: 18" Head: Spindle Type: R8 Spindle Speeds(16) 80 to 5.440 rpm Spindle Nose to Table: 0 to 18-1/8" Spindle Diameter: 1.875" Quill Diameter: 3.375" Head Adjustments: Head Cant(forward/back) 45 degrees Head Tilt(side to side) 90 degrees Head Swivel(side to side) 360 degrees. General: Motor: 3 Horsepower. 220 Volt, 3,450/ 1,720 rpm, 6/ 5.5 Amps, 60 Hz Electrical: 220 Volt. Three Phase Overall Dimensions: 65" x 72" x 86" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 1998! ACRAMILL 9" x 49" MULTIPLE SPEED VERTICAL MILLING MACHINE- 16-SPEED 1998! ACRAMILL 9" x 49" MULTIPLE SPEED VERTICAL MILLING MACHINE- 16-SPEED 1998! ACRAMILL 9" x 49" MULTIPLE SPEED VERTICAL MILLING MACHINE- 16-SPEED 1998! ACRAMILL 9" x 49" MULTIPLE SPEED VERTICAL MILLING MACHINE- 16-SPE
1) Used Tree Model 2UVRC. Vertical Milling Machine; Inventory# 11946 Specifications: Table Size 10-1/2" x 42" Spindle Speeds 60- 3.300 RPM Spindle Travel 4" Quill Feed 0.0015" 0.008" Rapid Traverse 70 IPM Table To End Of Spindle 0" 20-1/2" Longitudinal 25" Cross 11" Knee 17-1/2" Headstock Motor 3 Phase Horsepower 1 1/2 HP Equipped With: Geared Table Power Feed(x.Y) Variable Speed Head Work Light Specifications and Equipment are Preliminary. Subject to Buyer Verification. Contact us for a shipping quote. Specifications and Equipment are Preliminary. Subject to Buyer Verification. Sold As Is Where Is. With no implied warranty or guarantee. Our Inventory# 11946 Information is Preliminary. Subject to Buyer Verification. If you would like to inspect this item please contact us to make arrangements. ... moreWe are a member of the MDNA(Machinery Dealers National Association) Orca Machine Tools. Inc. is a stocking used machine tools dealer in Albertville, MN. Please contact us with any questions you may have. There is a $20 loading charge on freight shipments. Buyer is responsible for all shipping costs. US Buyers: Insurance is provided at the buyers request and at the buyers cost. International Buyers are required to pay for Insurance. Please contact us for a shipping quote. Also please wait for an Invoice from us prior to sending payment. If you wish to purchase multiple items. We combine items for shipping and send you an invoice for all items with the combined shipping price. Minnesota buyers will be charged sales tax. Payment in full must be made within 2 days of bid closing. We accept PayPal. Funds must clear prior to item shipment. Visit our eBay Store! Powered by The free listing tool. List your items fast and easy and manage your active items.
Kennametal KSSR-4-CP4-0 pilot 1-1/4 keys 1/2 Carboloy R220.33-04.00-12 pilot 1-1/2 keys5/8(ONE SCREWS IS MISSING AND I THINK THE THREAD IS DAMAGED AS SHOWN ON PICTURES 4. THE MILL CAN STILL BE USED)
Title: Kent Model KTM-4VKF 3 HP CNC Milling Machine Retrofit Base. Mfg'd 2000 Description: Our Internal Stock# 4-18-13 dale) You are about to purchase the following item: 1- Kent Model KTM-4VKF 3 HP CNC Milling Machine Retrofit Base. Mfg'd 2000 Model# KTM-4VKF Serial# 898459 3 HP main Spindle Drive Motor 60- 5000 RPM(variable) R-8 Spindle Taper 10" x 50" Table Power Knee Elevation and Feed Unit(Not Controlled) Rectangular Hardened& Ground Way on the saddle. Automatic Lubrication System. There are Mitutoyo Digital readouts Scales for Table. Saddle& Quill Travel on this Machine. Machine had Servo Motors on Table. Saddle and Quill YOU ARE BUYING JUST THE BASE MACHINE WITH SERVO GEAR BOXES. ALL BALL SCREWS, SPINDLE DRIVE, YOU ARE NOT GETTING A CNC CONTROLLER OR THE SERVO DRIVE MOTORS AND AMPLIFIERS. Original Paint on ... moremachine. Weight is approx. 2800 Lbs. This Machine is in very good mechanically Condition. Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All items that are bought and payed for before 4 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. WE DO NOT CHA
milling machine model# 6-1155 01-265. Shaping attatchment tooling. Shims, manual,work mat. Three phase converter. Low hours Used at pharmaceutical facility for plastics its whole life. excellent condition. $12.500 o.b.o. or trade Buyer can arrange other shipping method.
Seiki/ Milltronics No. 4VH 3-Axis CNC Vertical Knee Mill. New 1997. Stock# 26399 Specifications: Table Size- 10" x 50" Longitudinal Table Travel(X-Axis) 36" Cross Travel(Y-Axis) 16" Knee Vertical Travel(Manual Adjustment) 16" Millslide Travel(Z-Axis) 6-1/2" Quill Travel- 5" Spindle Taper- R8 Spindle Speeds. Infinitely Variable- 60 to 4200 RPM Quill Diameter- 3-3/8" Weight. Approx- 3050 Lbs. Equipped with: Centurian 6 3-Axis CNC Control Conversational or G-Code Programming LCD Display Color Graphics Patented"Millslide" Z-Axis Stroke Full 3-Axis Machining Kurt Power Drawbar 3-1/2" Floppy Drive RS232 Port 1-Shot Lubrication Box Ways Manuals PRICE: $10.500.00 USD FOB TRUCK DAYTON OH WAREHOUSE. Youtube video link- http:youtu.be/vNgIelai9oc Offered subject to prior sale. Buyer responsible for ... morelocal pick up or shipping arrangements. Standard MDNA 30 day return privilege. Freight prepaid(by buyer) if proven mechanically unsatisfactory or repair at seller option. Local sales tax is 7% if applicable. We accept paypal. Company check, wire transfer, mc/ visa(call with info) cash as acceptable means of payment.
1996 Cincinnati Milacron Arrow 750 Like New 1996 Cincinnati Milacron Arrow 750 Well Maintained* Guaranteed Up& Running& In Great Working Condition* 4 th& 5 th Axis Ready· Touch Probe Ready· Pallet Change Ready· Equipped With Handle Jog Includes For Free If Buyer Wants Them: Free Midaco Series 30 Pallet Changer· Free JVC 600V Transformer Watch Video Of The Machine Up& Running At: Reason For Selling: Owner Needs A Larger Machine 100% Around $5.000 has been recently spent on maintenance work on the machine to make sure it is in proper working condition(Have documented proof to show to interested buyers if needed) For example: Brand New 2012 Color LCD Monitor Has BeenEquipped On The Machine· Brand New 2012 Hard Drive With The Acramatic 2100 E Has Been Install Onto The Machine· Bran New 2012 WSCPU ... moreBoard Has Been Installed Onto The Machine· Brand New 2012 Power Supply Has Been Installed Onto The Machine· Inspected By A Machine Repair Dealer on 2012 To Make Sure Ways. Ball Screws, Spindle, Machine Is In Good Running Condition Machine Located at 13300 West Star Drive Shelby Twp. MI 48315 Machine can be viewed by local interested buyers anytime from Monday-Friday from 9:00am-5:00. Please call(586) 739-7760 to make an appointment to view it. Machine Specs: CAT40 Holder Type 21 Tool Changer Rigid Tapping Control System: Acramatic 2100E All Manuals& Back Up Disks Included Machine Serial# 7043 A0A 96 0820 Machine Table: X = 37.4” Y = 20.4” Machine Table Load = 1000 lbs Axis Travel Ranges: X = 30” Y = 20” From Spindle Carrier: Z = 20” Rang. Spindle Gauge Line To Work Surface: Minimum = 20” Maximum = 25” Machine Horsepower Max: 10HP Spindle Speed: Minimum = 60 RPM Maximum = 6000RPM Feed Rates: Max Feed Rates(X.Y,Z) 470 Inches/Minute Rapid Traverse Rate(X.Y,Z) 780 Inches/Minutes Axis Thrust(Duty Rate) X.Y kN = 3 Z kN = 3 Accuracies: Uni-directional positioning per linear axis over full travel = 0.004mm Uni-directional repeatability per linear axis over full travel = 0.0
I got this motor as a favor for helping move machinery for my bridgeport but I have a one already. I was told it worked and was a spare. I have no use for it. Its the pancake style motor that can be adapted to fit other mills or machinery. Any questions feel free to ask.thanks Posted with
Atlas Horizontal Milling Machine. Serial no: 004 322. Atlas vise. Been repaired works perfectly. Mote Coolant pump. Please call Larry at 618.691.8913 with questions or to view. Located in Edwardsville. Il. $2.250.00 or best offer. BUYER to arrange shipping. Free local pickup. Paypal. Cash accepted.
aims CLEAN! BRIDGEPORT 9" x 42" VERTICAL MILLING MACHINE- 8-SPEED- WELL EQUIPPED read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Bridgeport Machines Inc. of Bridgeport. Connecticut. This is a used Multiple Speed Vertical Milling Machine in GREAT condition. Serial# 12/BR 202652 This Milling Machine is coming out of a Downtown Pasadena shop that is closing down. All of their equipment has been well maintained. And this machine is no exception. This company for the last 50 years did Industrial Design and Prototype work, helping other companies create new products. This machine has never been in a production setting, or put on a production schedule. We here at Reliable Tools strive to provide you with quality equipment, at a fraction of the cost. So act fast ... morebecause a deal like this won't last long. Features: 8 Speeds(belt/pulley) 1 Horsepower Spindle Motor. Servo Type 70 X-Axis Power Feed. Sargon Prospector Three-Axis DRO(X. Y& Knee) Specifications: Table: Overall Size: 42" x 9" T-slots: 3@ 2.5" centers T-slot Size: 0.625" Table Load: 750 lbs. Height Above Floor: 47-1/4" Travels: Table Travel(X-Axis) 30" Saddle Travel(Y-Axis) 12" Knee Travel(Z-Axis) 16" Quill Travel: 5" Ram Travel: 12" Spindle: Throat Distance: 6.75"min. 18.75" max. Table to Spindle Nose: 2.5" min. 18.25" max. Spindle Diameter: 1.875" Quill Diameter: 3.375" Quill Feed: 0.0015/ 0.003/ 0.006 in.rev Taper: R8 Speeds(8) 80 to 2.720 rpm(80- 135- 210- 325- 660- 1,115- 1,750- 2,720) Head Adjustments: Head Cant(forward/back) 45 degrees Head Tilt(side to side) 90 degrees Head Swivel(side to side) 360 degrees. General: Motor: 1 Horsepower. 1,420/ 1,730 rpm, 200/ 230/ 380/ 460 Volt, 50/ 60 Hz Electrical: 200/ 230/ 380/ 460 Volt. Three Phase(currently wired for 230 Volt) Overall Dimensions: 58" x 58" x 80" tall. Comes as shown in pictures. To go to The Manufacturers Website:
Rambaudi Milling Machines V2& V3 Models V2 and V3 In 1968. Having manufactured more than 3000 examples of the earlier(with half exported to the United states) An updated model was introduced, the V Series. Although of a similar layout to the VR, the two versions made, the differed in almost every detail and were made in two versions with the first produced still styled in the rounded form common until the late 1950s and then. In order to look more modern, with the major castings redesigned in the distinctly rectangular fashion popular during the 1960s. The miller could be supplied as the V2 or V3 with a non-rotating ram or as the VG2 and VG3 with a swivel base that allowed the whole head assembly to be rotated through 360°. However, in contrast to the VR models the range was restricted, their being no combination vertical/horizontal"S" ... moreversions with a powered horizontal spindle. Identical in specification and size apart from their vertical heads, the V2 and V3 had just one size of table, 42" x 12" with four 9/16" T-slots on 2.5" spacing. Longitudinal travel under hand or power feed(hand being by a single, forwards facing hand wheel working through bevel gears) was 29.5" with hand-driven cross and vertical travels of 12" and 16.3" respectively. Although no power-feed option was available for across and vertically, the latter could(as an optional extra) be fitted with a self-contained rapid-feed unit, Driven by a 0.5 h.p. motor through an oil-bath gearbox located on the right-hand side of the knee. Twelve rates of longitudinal table feed were available(power across and vertically was not available) spanning 0.5" to 22" Selection of feed rates was by a combination of a short lever and a front-facing dial on the front of the motor-gearbox with engagement by a second, longer lever- pressing it down from its central(neutral) position engaged the feed(and started the spindle) while lifting it up(against spring pressure) caused the rapid feed, at a rate of e
Description j? HERE I HAVE FOR SALE A POLAR HYDRAULICS MAGNETIC GAURD/ SCREEN SUITABLE FOR A WIDE RANGE OF MACHINES. DELIVERY PRICE TO UK MAINLAND PLEASE ASK FOR OTHER LOCATIONS. YOU ARE LOOKING AT A OLIVER 4 HEAD SINGLE ENYOU AR THANKYOU FOR TAKING A LOOK PLEASE HAVE A LOOK AT MY OTHER ITEMS Any questions please ask 07926 048237 Payment Please pay as promptly as possible. Items not paid for within 7 days may be subject further action and possibly re-listed. Please let us know any specific problems and we will endeavor to do everything to ensure an easy transaction. Shipping We aim to ship within 2 working days of any payment clearing. We generally get quotes and use the most suitable/ economical courier/ hauler as we try to offer good value for money. You are more than welcome to arange and pay for your own courier. Please contact us with ... moreany arrangement made. Terms of Sale If you are not completely satisfied with your purchase. Return the item to us in it's original condition within 14 days of receipt. Returned items should be unused and must be returned in original packaging with any enclosed documentation. We will issue a full refund excluding the original delivery charge upon receipt. Alternatively if we have a replacement we will exchange the item. Please note: 1.Goods will only be acceptable for return if they are dispatched within 14 days of delivery. Unless we have notified you otherwise. 2.The item is your responsibility until it reaches us. Therefore for your own protection we recommend that you send the parcel using a delivery service that insures you for the value of the goods. 3.The cost of returning the goods to us is your responsibility. 4.Delivery charges are only refundable when goods are found to be faulty. About Us TR Trading is a newly established company selling a host of interesting items. We try to ensure that all items are well described and are reasonably priced to reflect their condition. Contact Us TR Trading Northallerton North Yorkshire 07926 048237 or 07732 797057
Description j? HERE I HAVE FOR SALE AN EXCELLENT WOHLHAUPTER UPA 3 FACING AND BORING HEAD FOR A MILLING/ DRILLING MACHINE FITTED WITH 40 INTERNATIONAL TOOL HOLDER THE TOOL HOLDER IS CHANGEABLE. DELIVERY PRICE TO UK MAINLAND PLEASE ASK FOR OTHER LOCATIONS. YOU ARE LOOKING AT A OLIVER 4 HEAD SINGLE ENYOU AR THANKYOU FOR TAKING A LOOK PLEASE HAVE A LOOK AT MY OTHER ITEMS AS I HAVE MORE WOHLHAUPTER HEADS AVAILABLE. Any questions please ask 07926 048237 Payment Please pay as promptly as possible. Items not paid for within 7 days may be subject further action and possibly re-listed. Please let us know any specific problems and we will endeavor to do everything to ensure an easy transaction. Shipping We aim to ship within 2 working days of any payment clearing. We generally get quotes and use the most suitable/ economical courier/ hauler as we try ... moreto offer good value for money. You are more than welcome to arange and pay for your own courier. Please contact us with any arrangement made. Terms of Sale If you are not completely satisfied with your purchase. Return the item to us in it's original condition within 14 days of receipt. Returned items should be unused and must be returned in original packaging with any enclosed documentation. We will issue a full refund excluding the original delivery charge upon receipt. Alternatively if we have a replacement we will exchange the item. Please note: 1.Goods will only be acceptable for return if they are dispatched within 14 days of delivery. Unless we have notified you otherwise. 2.The item is your responsibility until it reaches us. Therefore for your own protection we recommend that you send the parcel using a delivery service that insures you for the value of the goods. 3.The cost of returning the goods to us is your responsibility. 4.Delivery charges are only refundable when goods are found to be faulty. About Us TR Trading is a newly established company selling a host of interesting items. We try to ensure that all items are well described and are reasonably
aims BRIDGEPORT 6" MILLING MACHINE VISE W/ 360 DEG. SWIVEL BASE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Bridgeport. This is a Milling Machine Vise with Swivel Base in good condition. Features: Hardened vise bed. Hardened jaw plates. Semi-hard steel screw. The 360 Swivel Base makes this vise amazingly versatile. Specifications: Jaws: 6" wide x 2" deep. Vise Capacity: 5" Overall Dimensions: 17" x 12" x 6-1/2" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ... moreBRIDGEPORT 6" MILLING MACHINE VISE W/ 360 DEG. SWIVEL BASE BRIDGEPORT 6" MILLING MACHINE VISE W/ 360 DEG. SWIVEL BASE BRIDGEPORT 6" MILLING MACHINE VISE W/ 360 DEG. SWIVEL BASE BRIDGEPORT 6" MILLING MACHINE VISE W/ 360 DEG. SWIVEL BASE Reliable Tool Inc. c 2011 | Powered by
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Light Machines Spectralight Table-Top CNC Milling Machine. Mill, Workshop Item Description: This is a Light Machines Spectralight Table-Top CNC Milling Machine. Made by Light Machines Corp Spectralight Tabletop ... moreCNC Milling Machine Not tested. Sold as is. Approx. dimensions: 25" L x 21" W x 24" H Note Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. This auction is located at Naples. FL 34112 and being Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 33126) nbsp, nbsp, Model: This item is in FLORIDA Local pick-up only. nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Size: Approx. dimensions: 25" L x 21" W x 24" H, nbsp, nbsp, Condition: This item is used and sold as-is. Due to the location. This item was NOT TESTED for operation. Item may need service and/or parts to make operational. nbsp, nbsp, Pickup Logistics and Handling: NOTE: SHIPPING is NOT AVAILABLE for this item- LOCAL PICKUP ONLY. Due to the locatio
Normal 0 Welcome to my site! Alliant CNC Milling Machine w/ a Series 1100 Anilam Computer Includes all the disks for programming& Manual Table Dimensions: 10" x 50" 3 Phase RPM = 60-4500 X-axis travel = 590mm( about 23.23" y-axis travel = 270mm(about 10.63" Spindle Vertical Travel = 127mm(about 5" Knee Vertical Travel = 410mm(about 16.14"0 Motor is a 2 H.P. This machine takes Q wik Switch tooling. We have 14 Qwik Switch Tools we can sell separately. 3 are for key less Jacobs chucks. 2 are 1/2" 2 are 1/4" 1 is 3/4" 1 is 5/8" 1 is 1/8" 1 is 3/16" 2 are 3/8" and 1 is tapered Please see item description Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Everything is in great condition. ... moreMachine has been maintained very well. Table looks great. Everything moves with ease. It needs a new battery. The owner has quick change tooling for this machine that could be sold separately. We do not have the materials or the resources to ship this item. Item must be picked up or shipping arrangement s must be made solely by the buyer. We do not have any lifts on site. Moving equipment will have to be supplied by the bu yer. The shop does have a loading dock. If you have any questions. Please ask and I will respond quickly! I can provide a contact phone number if needed. Sometimes a real voice goes a long way! We can definitely arrange a viewing time for interest ed buyers. N.M. buyers will be charged a 7.53% sales tax Thank you! I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal or cash payments only please! Item must be pai
You are bidding on an Centec 2A& 2B Milling Machine Manual. Approximately 18 pages dealing with; preparing the machine. Wiring, feed movements, speed selection, accessories, vertical head, powerfeed attachment, adjustments, with parts list and parts numbers.Payment within 7 days.I accept Paypal.I will post this item worldwide.UK Postage £2.25.Europe postage £3.28.Rest of the world £3.90.Sorry I do not accept foreign cheques or foreign postal orders, please choose another payment option.Happy Bidding! See'My Other Items' For Full List Of Machine Manuals. Ask Me A Question' if you cannot see the one you want. Or you can contact me to discuss anything or pay by credit/debit card on 01623-491001 or 07710-401194 See'my other items'for other machinery/tooling and also here See'my other items'for a ... moregood range of machine manuals and even more machine manuals here Powered by
You are bidding on a Bridgeport Milling machine manual. Approximately 126 pages, digitally remastered in A4 format for easy reading, which covers all models and shows parts lists with exploded views, operation and maintenance, electrical drawings, installation and foundation plan and accessories and attachments and much more.Payment within 7 days.I will accept paypal.I will post worldwide.UK Postage £2.25.Europe Postage £3.28.Rest of the world £3.95.Sorry I do not accept foreign cheques or foreign postal orders, please choose another payment option.Happy Bidding! See'My Other Items' For Full List Of Machine Manuals. Ask Me A Question' if you cannot see the one you want. or you can contact me to discuss anything or pay by credit/debit card on 01623-491001 or 07710-401194 See'my other items'for other machinery/tooling ... moreand also here See'my other items'for a good range of machine manuals and even more machine manuals here Powered by
You are buying an Alexander'Master Toolmaker milling machine instruction manual. digitally remastered in A4 format for easy reading. Approximately 34 pages with references to; foundation plan, lifting and levelling, specification, installation, controls, attachments, lubrication and maintenance, slotting head, vertical head, high speed head, dividing head, rotary table, etc. etc.Payment within 7 days.I will accept paypal.I will post worldwide.UK postage £2.25.Europe postage £3.28.Rest of the world postage £3.90.Sorry I do not accept foreign cheques or foreign postal orders, please choose another payment option.Happy Bidding! See'My Other Items' For Full List Of Machine Manuals. Ask Me A Question' if you cannot see the one you want. Or you can contact me to discuss anything or pay by credit/debit card on 01623-491001 ... moreor 07710-401194 See'my other items'for other machinery/tooling and also here See'my other items'for a good range of machine manuals and even more machine manuals here Powered by
This is for an Ajax No 1 universal milling machine manual with parts listl. Digitally remastered in A4 format for easy reading, approximately 32 pages showing, Foundation plan,specifications, lifting& levelling, controls, operation, lubrication and maintenance, vertical head, slotting atachment, electrical diagrams and with a very useful detailed pictorial parts list with parts numbers etc.Payment within 7 days.I accept Paypal.I will ship this item worldwide.UK Postage £2.25.Europe Postage £3.28.Rest of the world postage £3.95.Sorry I do not accept foreign cheques or foreign postal orders, please choose another payment option.Happy bidding! See'My Other Items' For Full List Of Machine Manuals. Ask Me A Question' if you cannot see the one you want. or you can contact me to discuss anything or pay by credit/debit ... morecard on 01623-491001 or 07710-401194 See'my other items'for other machinery/tooling and also here See'my other items'for a good range of machine manuals and even more machine manuals here Powered by
You are buying an Adcock& Shipley Model 2S Milling Machine Manual. Digitally remastered in A4 format for easy reading, approximately 50 pages showing, operation, lubrication and maintenance, specifications, attachments and accessories, auto cycle sequence starting, vertical head, dividing head, universal table etc.etc. I accept Paypal.I will ship this item worldwide.UK Postage £2.25.Europe Postage £3.28.Rest of the world postage £3.90.Sorry I do not accept foreign cheques or foreign postal orders, please choose another payment option.Happy bidding! See'My Other Items' For Full List Of Machine Manuals. Ask Me A Question' if you cannot see the one you want. or you can contact me to discuss anything or pay by credit/debit card on 01623-491001 or 07710-401194 See'my other items'for other machinery/tooling ... moreand also here See'my other items'for a good range of machine manuals and even more machine manuals here Powered by
This is for an Adcock& Shipley Model 1ES Milling Machine Manual, Digitally remastered in A4 format for easy reading, approximately 66 pages showing, operation, lubrication and maintenance, specifications, electrical diagrams and attachments and accessories etc.Payment within 7 days.I will accept Paypal.I will ship this item worldwide.UK Postage £2.25.Europe Postage £3.28.Rest of the world postage £3.90.Sorry I do not accept foreign cheques or foreign postal orders, please choose another payment option.Happy bidding! See'My Other Items' For Full List Of Machine Manuals. Ask Me A Question' if you cannot see the one you want. or you can contact me to discuss anything or pay by credit/debit card on 01623-491001 or 07710-401194 See'my other items'for other machinery/tooling and also here See'my other ... moreitems'for a good range of machine manuals and even more machine manuals here Powered by