In 
 
Order by: 
Available to: 
Price: 
 - 
$
129
Buy It Now
$16.5 Shipping
Condition: New
Location: Taylorsville,NC,USA
HI YOU ARE LOOKING AT A POWER DRAW BAR FOR A VARIABLE SPEED R8 COLLET IMPORT AND BRIDGEPORT TYPE MILLING MACHINE. JET. MSC, ATRUMP, WT TOOL, ACRA, ACER, ... moreCHEVLAIR, ENCO, TRAVERS, SUPERMAX, AND MANY MORE. THE MOST SIMPLE AND ECONOMICAL POWER DRAWBAR OUT THERE. IT WORKS FROM AIR PRESSURE 90 PSI MAX. YOU JUST PULL DOWN ON THE HANDLE AND MOVE IT LEFT OR RIGHT TO LOOSEN OR TIGHTEN THE DRAW BAR, LET GO OF THE HANDLE AND IT RETURNS TO TOP AUTOMATIC. A HUGH TIME AND AGGRAVATION SAVER NO LOST TIME LOOKING FOR YOUR WRENCH OR HAMMER. MAIN BODY MADE OF 6061 ALUMINUM, MAIN FRONT SLIDE IS MADE WITH STEEL ROD AND NYLON BUSHING, FOR LONG LIFE AND TO DAMPEN ANY VIBRATION FROM THE HEAD. ONE SCREW REMOVES TOP PART TO GIVE ACCESS TO DRAW BAR. CAN BE MOUNTED IN MANY POSITIONS AROUND THE HEAD TO FIT YOUR OWN PREFERENCE. HANDLE FULLY ADJUSTABLE TO FIT YOUR PREFERENCE AND TO TAKE UP ANY WEAR THAT MAY TAKE PLACE OVER TIME. USES ORIGINAL DRAWBAR SO NO SPECIAL DRAW BAR TO BUY. COMES ASSEMBLED COMPLETE WITH IMPACT WRENCH READY TO MOUNT ON YOUR MILL AND USE. IF YOUR COLLET STICKS IN THE SPINDLE RETURN THE IMPACT TO THE TOP AND BRING IT DOWN AND STRIKE THE DRAWBAR AS YOU WOULD WITH A HAMMER THERE IS ALSO A REGULATOR BUILT IN THE IMPACT WRENCH TO KEEP FROM OVER TIGHTENING THE DRAWBAR. WE DESIGNED THIS POWER DRAW BAR IN OUR SHOP AND HAVE SOLD OVER 400 UNITS WITH GREAT RESULTS THERE ARE COPIES OUT THERE SO BEWARE GET THE ORIGINAL. ALL OF THE MAIN BODY IS MADE AND ASSEMBLED IN OUR SHOP HERE AT M&T MACHINE, TAYLORSVILLE N.C. 28681 USA. WE HAVE USED THIS TYPE POWER DRAW BAR IN OUR SHOP FOR MORE THAN 10 YEARS WITH NO PROBLEMS. WE OFFER A FULL 30 DAY FULL REFUND IF YOU ARE NOT FULLY PLEASED WITH THIS ITEM. ANY QUESTIONS CALL 828-632-1500 HOME. PLEASE CHECK OUR EBAY FEEDBACK AND PLEASE LOOK AT OUR EBAY STORE WE HAVE OTHER TIME AND LABOR SAVER MACHINE SHOP TOOLS FOR SALE AS WELL AS POWER DRAWBARS FOR STEP PULLEY HEADS THANK YOU VERY MUCH FOR LOOKING TODD AND SHANNON
$
11,000
Buy It Now
Free Shipping
Condition: Used
Location: Washington,PA,USA
$
439.95
Buy It Now
Free Shipping
Condition: New
Location: Ontario,CA,USA
Milling Machine Accessory- Right Angle Attachment R8 fits Bridgeport Milling Machine Right Angle Attachment Fits all milling machines with a 3 3/8" ... more85~86mm) quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill Note: Maximum allowed speed with right angle attachment is 2000 rpm. Complete Set Includes: right angle attachment. R8 stub arbor& drawbar extension socket_gsrx_vers_525(GS 6.6.5(525)
$
12,500
Buy It Now
Free Shipping
Condition: Used
Location: Harrison,NJ,USA
$
20,000
Buy It Now
$0 Shipping
Condition: Used
Location: San Francisco,CA,USA
$
9,900
Buy It Now
$3,000 Shipping
Condition: Used
Location: Chicago,IL,USA
$
8,950
Buy It Now
Free Shipping
Condition: Used
Location: Cincinnati,OH,USA
$
14,900
Buy It Now
Free Shipping
Condition: Used
Location: O'Fallon,MO,USA
$
13,499
Buy It Now
$0 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
59,990
Buy It Now
$0 Shipping
Condition: Used
Location: USA
$
14,849
Buy It Now
$0 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
1,999
Buy It Now
$0 Shipping
Condition: New
Location: Ontario,CA,USA
$
11,159
Buy It Now
$0 Shipping
Condition: New
Location: La Vergne,TN,USA
$
159,500
Buy It Now
Free Shipping
Condition: Used
Location: Wakarusa,KS,USA
$
99,000
Buy It Now
$0 Shipping
Condition: Used
Location: USA
$
35.48
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
17,500
Buy It Now
$0 Shipping
Condition: Used
Location: Chatsworth,CA,USA
eBay Template 2011 Fadal 2004 VMC 3016 High Torque Vertical CNC Mill Machine Center PACO NOT INCLUDED"This compact machine provides customers with ... moreunsurpassed performance utilizing heavy-duty box way construction. High-speed spindle of 10,000 RPM, and dual mounted Steinmeyer ETA+ ball screws. Fadal VMC 3016 is designed for versatile metal cutting operations and has a strong focus on rigidity. Speed, and controls capability. The machine is especially well suited for die and mold producers and parts manufacturers who need a highly capable machine with low operating costs. Fadal 3016 is extremely rigid and delivers fantastic dynamic cutting stability of smaller parts from steel, aluminum or graphite. Fadal.com STANDARD FEATURES High Torque Spindle, 22.5 HP Spindle Motor, CNC 88HS Control, Flat Panel Display CAT-40 Spindle Taper, High Performance Axis Motors, Box Way Construction, Standard 10.000 rpm Spindle, 21 Station Automatic Tool Changer, Two Speed Gearless Drive System, OPTIONAL FEATURES INSTALLED 8-MEG Memory Expansion, Rigid Tapping, High Speed CPU, Color Monitor USB Drive Graphics Wired for 4th Axis Control Previously had a Fadal VH-65 Rotary(not included) 4th Axis Servo Controller DC motor not confirmed SPECIFICATIONS Table Size 39" x 16" X-Axis Travel 30" Y-Axis Travel 16" Z-Axis Travel 20" Table Load Capacity 2.736 lbs. Spindle Nose to Table 4" 24" Spindle Center to Column 16" Spindle Speed Range 10-10.000 rpm Spindle Taper CAT 40 Spindle Motor 22.5 HP- Peak High Torque 220 Ft-lbs. Tool Storage Capacity 21 Rapid Feedrate(x.Y)700 ipm, z) 600 ipm Maximum Cutting Feed Rate 0.01- 250 ipm Max. Tool Weight 15 lbs Motor 220 V. 3 Phase, 60 KW Floor space(lenght x depth) 77" x 98" Machine Height 103" Machine Weight 8.550 lbs Power Requirement 230 VAC. 3 Phase*Specifications subject to verification CONDITION Machine in good running condition. Looks cosmetically nice with minor wear from previous use. Please see video above. Please call for more details. As
$
9,750
Buy It Now
Free Shipping
Condition: Used
Location: Cedarburg,WI,USA
$
8,900
Buy It Now
Free Shipping
Condition: Used
Location: Rochester,NY,USA
$
14,849
Buy It Now
$0 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
36,500
Buy It Now
Free Shipping
Condition: Used
Location: Ridgeland,SC,USA
$
6,300
Buy It Now
Free Shipping
Condition: New
Location: Harrison,NJ,USA
$
11,550
Buy It Now
$0 Shipping
Condition: Used
Location: Osseo,MN,USA
$
9,750
Buy It Now
$0 Shipping
Condition: Used
Location: Los Angeles,CA,USA
$
17,500
Buy It Now
$0 Shipping
Condition: Used
Location: Schaumburg,IL,USA
$
3,925.85
Buy It Now
$0 Shipping
Condition: New
Location: Macon,GA,USA
$
7,900
Buy It Now
Free Shipping
Condition: Used
Location: Fernwood,ID,USA
$
699,995
Buy It Now
Free Shipping
Condition: Used
Location: Erie,PA,USA
$
6,800
Buy It Now
$200 Shipping
Condition: New
Location: Houston,TX,USA
$
5,000
Buy It Now
$0 Shipping
Condition: Used
Location: Fort Worth,TX,USA
$
17,500
Buy It Now
Free Shipping
Condition: Used
Location: Harrison,NJ,USA
$
6,900
Buy It Now
Free Shipping
Condition: Used
Location: Hugo,MN,USA
$
2,319
Buy It Now
$85 Shipping
Condition: New
Location: Vista,CA,USA
$
4,500
Buy It Now
Free Shipping
Condition: Used
Location: Harrison,NJ,USA
$
2,124.15
Buy It Now
Free Shipping
Condition: Used
Location: Saint Paul,MN,USA
$
8,950
Buy It Now
Free Shipping
Condition: Used
Location: Metuchen,NJ,USA
$
9,500
Buy It Now
$0 Shipping
Condition: Used
Location: Huntington Park,CA,USA
$
3,950
Buy It Now
Free Shipping
Condition: Used
Location: Cincinnati,OH,USA
$
14
Buy It Now
Free Shipping
Condition: Used
Location: West Point,PA,USA
Untitled Document Description Item: Vise Jaw Stop(Model: 14-000) Condition: New in Box Specifications Fits all milling machine vises with 1/2" 7/8" ... morethick jaws and 1/8" minimum protrusion 1-1/8" wide body with 2 hardened steel guide pins and large#10 clamp screw 1/8" x 2" hardened stop pin is used to accurately locate work pieces. The stop pin is also adjustable side-to-side to allow for cutter clearance The stop pin is positioned completely below the top surface of vise jaw to allow for cutter clearance Body made from anodized aluminum 8-32 non-marring flat point set screws are used to secure stop rod Vise Jaw Stop The Vise Jaw Stop by Edge Technology Products is the most advanced jaw stop to date. It features a micro stop rod that is positioned below the top surface of the vise jaws for cutter clearance. The stop rod is also adjustable side-to-side to allow space between the unit and the work piece for even more cutter clearance. Patent Pending Payment& Shipping Payments Accepted: Paypa l. Shipping USPS. See Shipping and Payments tab for details. Note: If multiple items are purchased from our store we will combine shipping. Please request a package invoice before you pay. International: Worldwide shipping available. See Shipping and Payments tab for details. International buyers please note that your country's customs department may add additional charges to process your package. We are unable to anticipate these fees and advise you to research your country's customs regulations before you bid. Thank you. Email info@edgetechnologyproducts.com Phone(520)299-1185 Vise Jaw Stop Photo Gallery Related Products by Edge Technology Products Please take a moment to check out the other high quality machinist gages and tools that we offer. Click the button below to go to our Ebay Store.
$
649.99
Buy It Now
Free Shipping
Condition: New
Location: Walpole,MA,USA
$
599.99
Buy It Now
$14 Shipping
Condition: New
Location: Niles,MI,USA
$
36.99
Buy It Now
$0 Shipping
Condition: New
Location: Murfreesboro,TN,USA
$
21,500
Buy It Now
$0 Shipping
Condition: Used
Location: Schaumburg,IL,USA
$
19,500
Buy It Now
Free Shipping
Condition: Used
Location: Toledo,OH,USA
$
7,000
Buy It Now
$0 Shipping
Condition: Used
Location: Leland,NC,USA
$
17,500
Buy It Now
Free Shipping
Condition: Used
Location: Dayton,OH,USA
WE ALWAYS CONSIDER ALL"REASONABLE" OFFERS AND MANY ARE PROMPTLY ACCEPTED! You are invited to purchase or" MAKE YOUR BEST OFFER" on ... morea MAZAK HTC 400 CNC HORIZONTAL MACHINING CENTER. TWO(2) PALLETS 15.70" X 15.70" 10,000 RPM'S, CAT#40 and with the following approximate specifications: THERE ARE TWO(2) OF THESE MACHINES AVAILABLE AND COULD ACCEPT PACKAGE OFFER FOR BOTH. Specifications: Pallet Size…15.70" x 15.70" X Axis Travel…22" Y Axis Travel…20" Z Axis Travel…20" Spindle Motor…15 Hp Spindle Speed…10.000 RPM Spindle Taper… 40 Auto Tool Changer…24 ATC Pallet Index…15 Degree Machine Floor Dimensions…92" x 142" x 95" Tall Machine Weight…14.767 Lbs Equipped With: Control: M Plus 2 Pallet System Coolant System Chip Conveyor CONDITION: Machines under power for inspection! Mfg Date: 1996( Location: Southwestern. Ohio Can be inspected under power These TWO(20) MAZAK HTC 400 CNC HORIZONTAL MACHINING CENTER'S. TWO(2) PALLETS 15.70" X 15.70" 10,000 RPM'S, CAT#40 and can be inspected by calling 606 882 2765 for appointment. Please review our"Feedback and About Us" where you will find that we ALWAYS try to fairly describe all items and offer a 7 day return guarantee(freight prepaid) if item is not as listed. For items shipped by truck contact any or all of the following for reasonable quotations: Chaun at Next Level Logistics 1-612-237-6843(Excellent Service) We additionally have local riggers that can give reasonable quotations as well as quoting containerizing items for overseas shipments. ALL items we list are offered locally and could be sold previous to end of store listing. We gladly accept Pay Pal in payment for items $150.00 or UNDER ONLY. For more expensive ITEMS acomodations can be made WITH PRIOR PERMISSION to pay with Pay Pal. We additionally accept personal. Company, certified, cashiers checks drawn on recognizable U. S. Banks and accept bank wire transfers. Once payment is received and clears
$
219,000
Buy It Now
$0 Shipping
Condition: Used
Location: Dousman,WI,USA
$
13,500
Buy It Now
$0 Shipping
Condition: Used
Location: New London,OH,USA
$
1,215
Buy It Now
$0 Shipping
Condition: New
Location: Sandston,VA,USA
$
17,699
Buy It Now
$0 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
29,450
Buy It Now
Free Shipping
Condition: Used
Location: Watertown,CT,USA
$
11,099
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
$
14,500
Buy It Now
$0 Shipping
Condition: Used
Location: Toledo,OH,USA
Questions? Call us: 1-877-328-9236. SWI SouthWestern 50" MX3e Trak DPM CAT 40 CNC Knee Mill ProtoTRAK + Tool Holders. Manufacturer: SouthWestern ... moreIndustries SWI Model: Trak DPM Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: SouthWestern Industries SWI Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: NOTE: One of the tool holders has a chipped edge. This item was not fully tested. Since we do not have the proper resources. When power was applied, the control module booted up. We were able to toggle through the various selections, though we could not retrieve a program to run it. It stated that there were not any programs present. We were able to run the spindle motor at various speeds and in reverse/forward. Manually the table moves in all positions with no problems. No further testing was performed. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) SWI SouthWestern 50" MX3e Trak DPM CAT 40 CNC Knee Mill, 12) CAT 40 Tool Holders, 19) Collets, 4) Wrenches, 2) Floppy Disks, Specifications: Mill: Manufacturer: SWI SouthWestern Industries, Model:TRAK DPM, SN: 95-2143, Table Size: 50"L x 10"W, Overall Table(with left work area) 62"L x 10"W, Spindle: CAT 40, X. Y Z CNC Control, Speed: 70- 4200 RPM, Floppy Disk Program Control, CNC Control Unit: Proto Trak MX3, Full Load Current: 10 Amps, 115 V, Single Phase, 60 Hz, AC Spindle Motor: 220 V, 3 Phase, Full Load Current: 8.5 Amps, Motor: Manufacturer: Jinshin Elec. Frame: 100L, Poles: 4, V: 220/440, A: 8.5/4.25, 1720 RPM, Date: 1995, SN: 509950, Induction Motor, 3 Phase, 3 Hp 2.2kW, Bearings: 6205 6206, Tool Holders(CAT 40) 1- 40 EM 1.000 X 2.937 E, 1- 40 EM 0.625 E, 1- 40 EM 0.750 E, 1- ISO 40 ER 16 X 3.000 E(collet holder) 2- 40 EM 0.5 E, 1- LYNDEX Collet Holder, 1- 40 EM 0.500 E(with Jacobs. 14N, 3JT, 0-1/2" ballbearing super chuck) 1- 40 EM 0.375 E, 1- ISO 40 EM 3/8 X 2.312 E(collet holder) 1
$
9,499
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
$
16,949
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
$
49,500
Buy It Now
Free Shipping
Condition: Used
Location: Dover,KY,USA
$
15,000
Buy It Now
$0 Shipping
Condition: Used
Location: Clarkston,WA,USA
$
69,900
Buy It Now
Free Shipping
Condition: Used
Location: Huntington Beach,CA,USA
$
1,595.89
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
69,300
Buy It Now
Free Shipping
Condition: Used
Location: Chino,CA,USA
 In 

Past Items  
 
good used 3/4" shank stub mill or saw arbor 3/4" shank x 1" dia pilot please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items. c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-14066f12b52-0xfe-
You are Bidding on(1) Original Bridgeport Nose Piece. Bridgeport Part# J172. Used Condition. Recently Purchased a Newer Bridgeport. Selling Miscellaneous Parts and Accessories from Previously Owned Bridgeport Milling Machine Series 1 Turret Miller J Head Model BR2J.
This Machine was Built New in 1996. Now for sale and available for your inspection at our warehouse in beautiful downtown Miamisburg. Ohio is this"EXCELLENT" Top Well Vertical Knee Type. CNC Milling Machine complete with an Analam Model 1100M. 3 Axes CNC Controller S/N 856027. You just can't go wrong with this machine. This machine tool was built in Tiawan by one of that countries premier machine tool builders and imported by Mitek Machine Tools of Chino. CA. The 3 Axes CNC controller is the very desirable Analam 1100M. Specifications for this machine are as follows: Spindle Drive Motor: 5 HP Spindle Speeds: 70 RPM to 3.800 RPM, Infinately Variable Table Size: 10" X 50" Longitudinal Travel(X axis) 31" 660 mm) Cross Travel(Y axis) 15" 330 mm) Knee Vertical Travel(Z axis) 6" 406 mm) + 15" Knee Travel ... morewith Power Elevation Ways: Box Ways. Hard Chromed and Ground Spindle Taper: 40(Power Draw Bar) Quill Power Feeds: 0015" 003" 006" 038 mm, 076 mm, 15 mm) Quill Travel: 6" 127 mm) Maximum Table Load: 880# Maximum Throat Depth: 24 1/2" 571 mm) Weight of Machine: 3.820# Accessaries include: Coolant with chip pan. Chip and coolant guard, power draw bar. We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge. You always buy with confidence at Machine Tools of America. First of all. Our descriptions are as accurate as we can possibly make them, and we've been describing equipment for longer than we care to admit. Secondly. We offer our customers a 30 day, frei
aims NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Cincinnati Milling Machine Company. This is a Toolmaster Variable Speed Vertical Milling Machine in working condition. Model# Toolmaster Serial# 6J4V5T-132 Features: NMTB 40 Spindle. Variable Speed. Bijur Lubrication System. X-Axis Power Feed. Heavy Duty Box Ways. Specifications: Table: Overall Size: 42" x 10" T-Slots: 3@ 2-1/4" centers T-Slot Size: 5/8" Travels: Table Travel(X-Axis) 22" Saddle Travel(Y-Axis) 10" Knee Travel(Z-Axis) 14" Quill Travel: 5" Ram Travel: 17" Spindle: Spindle Diameter: 3" Quill Diameter: 3-3/4" Taper: NMTB40 Spindle Speeds: 85 to 535 rpm(low) 615 ... moreto 3.800 rpm(high) Quill Feed: 0.0015/ 0.003/ 0.006 in.rev. Head Adjustments: Head Tilt(side to side) 90 degrees Head Swivel(side to side) 360 degrees. General: Motor: 2 Horsepower. 230/460 Volt, 1,710 rpm, 5.8/2.9 Amp, 60 Hz, Three Phase Electrical: 230/460 Volt. Three Phase Overall Dimensions: 61" x 60" x 81" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOO
Our internal inventory number on this product is LHM6# MN61-G. OUR RETURN POLICY. Due to the nature of this item. All sale of manuals are final! If you have a problem with the item upon receipt contact us immediately and we will attempt to address the issue! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. You are bidding on a Kearney& Trecker Machine Maintenance Manual for Milwaukee Machining and Milling Centers. Table of Contents: 1. Preventative Maintenance 2. Lubrication System 3. Pneumatic System 4. Coolant System 5. Spindle Group 6. Vertical Head and Linear Axes 7. Hoizontal Head ... moreLinear Axes 8. Machine Geometry 9. Chip Removal 10. Tool Storage 11. Rotary Table 12. Indexter Publication Number: PUB-813. Copyright: None 1976 Dimensions: 9" x 11" x 1" App. Weight: 2 lbs. It is(+/ 15 Pages. Seems complete and in generally GOOD used condition! These manuals ratings(Poor. Fair, Good) are based mostly on their usability for their information and partly on cosmetic condition! We will be listing many different types of manuals! If you aren't sure this will work for you. Please don't buy it. If there are any obvious deficiencies. We will always strive to let you know, but things can get overlooked. Please check out our Feedback. We are straight shooters! NOTE* FREE SHIPPING& HANDLING to lower 48 States via UPS Ground Service. All Others Domestic Shipments pay $3.00 boxing/ Handling PLUS shipping costs from Zip 49534! All International Shipments pay $5.00 boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 am de
This Sale is for ONE Package of 40 Nice PSW USA ARBOR SPACES 1-1/4" x 1-3/4" of Various Thicknesses. The some spacers still have packing grease. They look unused but some may have been so are listed as used as they came to us as a bulk lot and described as PSW arbor spacers Inside diameter 1-1/4 and outside diameter 1-3/4" in various thicknesses, the package shown contains 6 arbor spacers of the.031" thickness. Please see photographs for more detail. A ruler or scale shown is for size reference only and not part of sale. Thank you for looking. We ship Wednesday through Friday and are happy to combine orders for shipping costs. Please check my other sales& auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian ... moreBuyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items cross the border. These are the sole responsibility of the buyer. have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We accept PAYPAL for sales within north America. All items shipped to the US are sent by courier(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping rates listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or compon
Good used cincinnati horizontal milling machine arbor 1 1/4" diameter and has many shell cutter spacers. 5 taper. Take a look at my other items. Thank you.
SOTTOF SALES These parts are from a Model DM 2200 Vertical CNC Milling Machine. They may fit other DYNA MYTE models of Lathe or Mills, I am not sure. This lot of parts is from a machine owned by a University that paid a company to retrofit their machine.They are all used parts and I have no idea if they are all good or not. What you see is what you get, everything sold in"AS IS" Condition. Some wires are cut some are not. The last photo shows all the assemblies that are not cut, please look carefully at all the photos as this is what you will receive. D3722.7 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received ... morewithin seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
PLEASE NOTE:If anyone knows exactly what this is or what it fits and is willing to share that information so i can post it here please send me an email and i hope the gods smile upon you for sharing your knowledge. Up for auction is what i believe to be some kind of indexing head for a milling machine.I am not sure? What you see in the photos is what you get.There are no indexing plates or any accessories just the head as shown.this has a large tapered bore spindle which has an adapter shank to a smaller taper.Not sure currently which taper this has but will do some research and add it here if i find out.The base has a swivel that is graduated from 0 to 90 degrees to left of zero and also to right of zero so 180 degrees total graduated on the base.then the head also swivels on the post that comes up off the base and is marked the same way ... moreas the base with zero to 90 degrees up and down.So between the head and the base you can get a compound angle up down and swing left to right.The head itself is very beefy and the center rotates freely 360 degrees but is not marked out and i am assuming it gets some kind of bolt on indexing plate on the front as it looks like it has mounting holes and flange around the face for that but this head is not marked with any kind of manufacturer but does have a casting number stamped on it which is[ 77154] it has a thumb screw on the side of the head that locks the head and keeps it from rotating. Also has t slots cast into the head body on top and bottom. So basically what you see is what you get and no more. Weighs around 58 pounds so a little spendy to ship.Sold AS IS.Shipping is for USA lower 48 states only and ships via fedex ground so no PO boxes i need a physical address to ship to.SOLD AS IS.
BRIDGEPORT MILL MILLING MACHINE 1.5 HP BR-213691 FOR PARTS OR REPAIR BRIDGEPORT MILL MILLING MACHINE 1.5 HP BR-213691 FOR PARTS OR REPAIR. 9x48 INCH TABLE. YOU CAN PICK IT UP OR WE CAN SHIP IT. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 ... more718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
USED BUT GOOD WORKING CONDITION! GROUND 3-20)
good used cat 40- 3/4" end mill holder Parlec USA C40-75EM3 FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
Extra 6" Locked Type Milling Machine Vise TAV-150A 5-1/2" Jaw Spread Includes Handle This listing is for(1) Extra Machine Vise USED. ShelfG44 08125000JB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt for is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. ... moreIt is against federal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
Item Name: 6.25" Jaw Swiveling Milling Machine Vise Item# 8880 Price/Each: $250.00 Year: Brand Name: Model: Serial# Asset Tag: 5510 Item Location City: Watertown State: Connecticut Zip Code: 06787 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description 6.25" Jaw Swiveling Milling Machine Vise Swiveling Locked Type Milling Machine Vise. 6.25" Removable Jaws. 6.25" Opening. Swiveling Base. Dimensions: 17 x 13 x 6.5" Boxing/packing fee at time of sale. Contact Us About This Machine Should you have questions. Please contact Joe Devine at 860-484-4449 PAYMENT& SHIPPING: Payment Details: We will email you ... morean invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible for all scheduling, paperwork,
LWW 2106 VR is the"heavy duty" two-handed edge milling machine from FLEX. It is designed to handle up to 1-3/4" thick granite slabs. This product is ideally suited to round edges of larger natural stone surfaces(countertops. Tables or double basin kitchen sink holes) LWW 2106 VR is a portable tool yet has the power and flexibility of conventional stationary CNC machines. Thanks to well-balanced ergonomics and the easy glide of the plastic balls in the aluminium guide carriage the machine is easily controlled. Caution: For safety reasons. This unit should be operated only in conjunction with the GFCI operator protection circuit breaker! FLEX Metal composite housing: endurance tested and robust. FLEX four-fold full-wave electronics: with speed selection and consistent speed control. Soft start, overload protection. Aluminum guide ... morecarriage: with plastic balls for easy control. Corrosion-protected, GFCI operator protector circuit breaker: integrated in cord, Quick-action. Brass coupling: for 1/2" lego connector for water hoses, Tool fixture: G 1/2" spindle thread, Quality shut-off carbon brushes: protects the motor against damage, FREE SHIPPING! Be sure to checkout our eBay store for all your stone fabrication needs
Vintage 8" precision milling machine jaw vise heavy duty. This is in good used working condition with signs of use and wear as pictured. If you have any questions. Please email prior to bidding. Please view photos for condition and what is(or is not) included. Shipping will be $85.00 to your confirmed address in the lower 48 United States. All Other areas please email for a shipping quote. Local Pickup Available in the Lancaster, PA 17602 area. PA 6% Sales Tax applies to all pickup orders or orders shipped to Pennsylvania.
HEAVY DUTY PRECISION MILLING MACHINE SWIVEL VISE CLAMP 6" MILLING MACHINE 6" TABLE VISE with Swivel Base This listing is for 1 used item in fair general and working conditions. This heavy-duty precision vise weighs over 100 pounds and is made to last a lifetime in industrial workholding applications. Opens from 0-6" capacity. With 6-1/4" x 2-1/4" jaw faces and featuring reinforced moving jaw about 9" long. Swivel base rotates 360-degrees and vise can be detached and mounted without it. Entire assembly is about 20" long closed without handle. Handle NOT included, but any standard 5/8" square mounting handle will fit and can be easily replaced. See pictures for more details and information of condition and please make sure that this is the part you need before purchasing. As it is a non-returnable item. ... moreThank you. We offer shipping options as well as a local pickup here in Rhode Island. Don't miss your chance to own this vise today! mill drill drilling lathe machnist precision clamp professional PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We will not ship to unconfirmed or unregistered shipping addresses, we also will not ship to third parties. Intention of payment should be made within 24 hours of winning an auction. Identification may be required and cleared funds approved before picking up items in person. SHIPPING: We ship using USPS Priority mail and UPS ground. We only use UPS and USPS Priority shipping services for ground shipping at this time as they provide shipping or tracking numbers as proof of shipping and delivery. As required by credit card and PayPal issuers. Shipping beyond the 48 contiguous continental United States to Alaska. Hawaii, Puerto Rico and some other US territories may use a different shipping formula of dimensional weight instead of actual weight on some items, mostly due to sizing. The shipping calculator can sometimes be off for these places. Shippin
For slitting/slotting saw blades. These have been re sharpened by the shop I got them from and to my knowledge not used after being sharpened.here are diameters and thicknesses as written on each by'them: 2.760. 2.743, 2.769, 2.742. They seem about 2 mm thick Saws like this sell for $30 and up each. I believe they are High speed steel because the markings are ground off and they don't feel heavy enough for solid carbide. I am moving on the 18th. If you want me to ship before I move you must pay for these right away after auction close. If not you will have to wait until we arrive. As long as I am paid onetime I guarantee I'll ship on time Posted with
Hardinge Horizontal Milling machine. Excellent vintage metalworking machine. This particular machine was a model specifically commissioned by the United States Air Force during World War 2. It has a threaded spindle which allows a lathe chuck to be mounted making the machine a bit more versatile. Overall the machine is in good condition with the exception of one large divot in the table caused at some point when the machine must have had a vertical milling head attached. No vertical head is included. The original 240 volt 3 phase motor is installed. It turns smoothly and doesn't have any play in the shaft. I haven't been able to power the machine up so I don't know for certain that the motor is good. The bad news. The machine is not complete. It originally had a mechanical power feed on the cross slide. That has been removed along ... morewith the cross slide's lead screw which was extended to allow for the power feed. In order to make this machine functional a new lead screw will need to be tracked down or fabricated. They can be found readily enough on the various machinist's forums however. Also missing are the Overarm bar and the Overarm Support. There is no tooling except for a pair of 5C collets and a Drawbar shown in the picture. The drawbar is rusty but functional. The spindle of this machine is tapered and works with the 5C collets. The machine includes a very heavy duty rolling stand as seen in the last image. It moves easily about the shop floor. The machine is located in Carthage. Missouri. It is the buyers responsibility to arrange loading and transport of the machine. I will assist as much as possible but I do not have a truck, forklift, or any helpers available to move the machine from my shop to a freight depot. My shop floor is raised 2 feet and with the machine on wheels it would be simple enough for a couple of guys to roll this machine on to a trailer.
You are bidding for: ARCHDALE 34" VERTICAL MILLING MACHINE BROCHURE in good used condition. 4 Pages any questions please call 07802 778619 PAYMENT OPTIONS UK: I accept Paypal& personal cheques(please allow 5 Days for the cheque to be banked and cleared before the item is sent. I do not visit the bank every day! POSTAL CHARGES: Postage is per item. I am happy to combine postage, packing and insurance costs on multiple purchases. Seller posts internationally(worldwide) Please contact for postage rates All items are sent well packed.
SUMMIT VERTICAL MILLING MDL VS350 MACHINE 10 X 50 TABLE POWER FEED. VARIBLE SPEED NICE WELL MAINTAINED MACHINE. WILL INCLUDE 6" VISE, COLLETS AND MANUAL 230/440/480V 3PH
10" x 15" Tee Slotted Tilting Milling Table. Tilts to approx 45 deg + Good condition
This auction is for a very cool set up tool. This tool might be homemade. And if it is whoever made it did an excellent job. This tool is used for doing setups on milling machines. The top“pad” of this tool is spring loaded and has a Mitutoyo#1411 travel indicator(001) attached, so you would set this tool under the endmill and slowly bring it down until there’s contact and you see the indicator reading you are looking for. Now your Z height is set. Easy peasy! This tool has a lot of weight to it, and looks to be somewhat vintage. CHECK MY OTHER TOOL AUCTIONS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-140796d0c7e-0xfb-
Excellent working condition Bridgeport milling machine. You can test drive it in our shop in Fall River. MA. Variable Speed, readout and motorized table. Model 6-X005, 1.5HP, 9x42" Table.
Mill Milling Drill Drilling Press Machine Head ADAPTOR& 6-HOLE TOOLHOLDER ATTACHMENT Quantity: 2-piece set Material: Aluminum Drilling Machine Adaptor and 6-Hole Toolholder PAYMENT: Paypal payment is due immediately for“Buy-it-now” listings and within 2 days for auction listings. If payment is not received within the specified time. We reserve the right sell the item to a different buyer. If SHIPPING is offered and price is quoted above: Shipping Address: According to Ebay/Paypal policies. We are required to ship ONLY to the address in either your Ebay(default shipping address) or Paypal account. The request for shipping to a different address cannot be honored as it disallowed according to Ebay/Paypal policies. International Shipping: Import duties. Taxes, and surcharges are already included as quoted when shipped through the Global ... moreShipping Program. If the item is not shipped through the Global Shipping Program. Then duties, taxes, and surcharges are not included in the item price or shipping charges, and they are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be if you are concerned. If LOCAL PICK-UP is offered and stated above: The buyer is responsible for arranging the item pickup within a week of the item selling date. The buyer can pickup the item himself/herself or make arrangements for his/her representative and/or shipping service to pick up item. As it is considered one of the same. This item has been tested and in good working condition. Nevertheless, the item must be inspected and tested as needed by the buyer or buyer’s representative for final approval prior to actual pickup. ABOUT US: We are not affiliated with the brand names being sold. And brands mentioned are for identification purposes only. TERMS OF SALE: Items for sale are in working condition unless otherwise specified. The item(s) in the photos are the actual item(s) for sale. And it is exactly what you will receive. Only the item(s) shown in the photos a
Used Works good Hardinge Collet closer wrench for TM-UM machines and indexers.Thank you
This Williams#601 1/2" wrench is in excellent condition. The handle has a glossy black finish. There are no personal names or ID's inscribed in it. It is 3" long tip-to-tip x 0.167" wide.For a small lathe toolpost or milling machine.
This is a quilll stop assembly.
Used 16 Pocket Automatic Tool Changer For Milltronics MM18 Milling Machine MP-1060U Brand: Milltronics Model: MP-1060U Notes:16 Pocket Automatic Tool Changer For Milltronics MM18 Milling Machine. Looks Like Pots Are Missing. Not Sure What Else Is Missing Best For Parts. Shipping on a pallet via common carrier: Shipping Dimensions: 48" x 40" x 23" H Shipping Weight: 275Lbs. Sold As Is Where Is. With no implied warranty or guarantee. Our Inventory# 10620 Information is Preliminary. Subject to Buyer Verification. If you would like to inspect this item please contact us to make arrangements. We are a member of the MDNA(Machinery Dealers National Association) Orca Machine Tools. Inc. is a stocking used machine tools dealer in Albertville, MN. Please contact us with any questions you may have. There is a $20 loading charge on freight ... moreshipments. Buyer is responsible for all shipping costs. US Buyers: Insurance is provided at the buyers request and at the buyers cost. International Buyers are required to pay for Insurance. Please contact us for a shipping quote. Also please wait for an Invoice from us prior to sending payment. If you wish to purchase multiple items. We combine items for shipping and send you an invoice for all items with the combined shipping price. Minnesota buyers will be charged sales tax. Payment in full must be made within 2 days of bid closing. We accept PayPal. Funds must clear prior to item shipment. Visit our eBay Store! Powered by The free listing tool. List your items fast and easy and manage your active items.
Barker Milling Machine RARE FRONT ARBOR SUPPORT AND SUPPORT NEEDLE BEARING ASSEMBLY This item is in very good condition with no chips or cracks. Needle support bearing appears fine. Item shows usual wear and tear. There is light rust and some metal staining. Ruler is not included.
good used nmtb 50 taper- 1 1/2" face mill arbor- extended mfg unknown# ST-28479-408 1" drawbar thread light pitting on the taper please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1407a02ff47-0xfe-
good used nmtb 50 taper- 1 1/4" center plug Cincinnati USA 1" drawbar thread FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
good used nmtb 50- 3 MT drill holder& 1/2" chuck Kearney tecker USA No 53M- shank dinged up with 5/8" drawbar threads Jacobs USA No. 3 1/2" drill chuck they are stuck together FREE SHIPPING ANYWHERE IN THE USA INCLUDING AK& HI please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
good used nmtb 50 taper- 1 1/4" end mill holder Lovejoy USA 5-STW10 1" drawbar thread light pitting on taper FREE FAST SHIPPING ANYWHERE IN THE USA INCLUDING AK& HI please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
good used nmtb 50 taper- 1 1/4" face mill arbor- extended Valenite V50M-S125-825 1" drawbar thread light pitting on the taper please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
Machine is powered up and seems to be in excellent condition all feeds speeds are working and running smooth. Table size is 10 x 52 only 1 axis on the DRO is working. Spindle taper size 50. 5 tool holders go with machine. We can forklift load to truck or trailor. Can crate and ship for additional charge. Posted with
THIS IS A VERY RARE AND ANTIQUE EARLY EXAMPLE OF ALFRED HERBERTS TOOLING WHICH IS STILL RESPECTED AND RENOWNED TODAY- AS ANY HERBERT FAN WILL KNOW HE IS HARD TO FIND AT THE BEST OF TIMES ONLINE(AS IVE FOUND OUT LOOKING FOR THIS TODAY) SO IT WILL BE NO SURPRISE TO TELL YOU THAT I COULDNT FIND ONE LIKE THIS ANYWHERE ONLINE EITHER. IT SEEMS A VERY RARE PIECE. THIS IS STILL IN WORKING ORDER WITH ORIGINAL DRILL CHUCK AND BOLT SPANNER! c1900-1930 HAND PILLAR DRILL/VERTICAL MILLING MACHINE/HAND OPERATED DRILL TOOL GREEN AND RED WITH A LOVELY RED. YELLOW AND GREEN SPINDLE WHEEL PATENT NUMBER- 165956 MODEL NUMBER 14 HEIGHT 26" GENERAL WEAR AND TEAR AS TO BE EXPECTED- SEE PICS FOR EXACT CONDITION POST IS HIGH AS THIS IS A VERY VERY HEAVY PIECE AND I WILL ONLY SEND MY ITEMS VIA RECORDED AND INSURED DELIVERY- I WOULD RECOMMEND AND PREFER YOU ARRANGE ... moreYOUR OWN COLLECTION IF POSSIBLE(DOESNT HAVE TO BE IN PERSON) THIS WAY I CANNOT BE LIABLE FOR ANY LOSS OR DAMAGE ONCE IT LEAVES MY PREMISES AND IT WILL ALSO BE ALOT CHEAPER FOR YOU. PLEASE CONTACT ME FOR AN EXACT POSTAGE QUOTE IF YOU LIVE IN IRELAND AND SCOTLAND AS SOME AREAS DO DIFFER FROM THE SPECIFIED POSTAGE I HAVE STATED ON MY LISTING.
Cvm1 milling machine. Will not power up. 1 owner machine in great physical condition but with some sort of electronic problem. I closed my business 2 years ago and have used this machine for my hobby work since then. As a result I do not want to invest money in refurbishing the controls for the rare occasion I have use for the machine. If machine does not sell at this auction it will be parted out and scrapped. Pick up only. Will not ship. Will arrange for forklift loading on flatbed truck or trailer here but tie down for safe transport will be your responsibility. Posted with
Tapping head by jacobs. Comes with 3 different size flex collets and the handle. See pics of what you will receive. Has straight shank that could be changed out if you wanted to once you got it. Posted with
Atlas Milling Machine Reproduction Book Nice condition old repro booklet.
Milling Machine Practices Reproduction Book Nice condition old repro booklet.
aims THE SKINNER CHUCK COMPANY# 5 MILLING MACHINE VISE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by The Skinner Chuck Company. This is a Milling Machine Vise in good condition. Specifications: Jaw Length: 5-1/4" Jaw Height: 1-1/2" Max Opening: 3" Overall Dimensions: 8" x 16" x 3-1/2" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. THE SKINNER CHUCK COMPANY# 5 MILLING MACHINE VISE THE SKINNER CHUCK COMPANY# 5 MILLING MACHINE VISE Reliable Tool Inc. c 2011 | Powered ... moreby
aims SWEET! CUSTOM AEROTECH 4-AXIS CNC BENCHTOP MILLING MACHINE w/ ROTARY TABLE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Custom Aerotech 4-Axis CNC Benchtop Milling Machine w/ Servo Rotary Table in GREAT condition. Medical device corporation surplus specialized in intraocular lens implants. Unsure how unit was being used or the exact application. But as you can see, was very well crafted with high quality components. See if this setup could work for you. Also a great opportunity for the hobbyist or anyone working on their own custom build. There must be thousands of dollars in parts and setup. Good Luck& Happy Bidding! Please email richard@reliabletools.com with any questions. Components: Aerotech#1000DC Servo Motors. Aerotech#DR 500 Servo Controller Module. Aerotech ... moreLiner Stage. Volkmann#AD-2 Spindle Drive. Loadpoint 40.000 RPM High-Speed Spindle. ER8 Taper Spindle. 6" Servo Rotary Table. Compact Pneumatic 5C Quad-Head Fixture. Unidex 500 Toolkit Version 4.10 Program. Lenstec Lens Mill Program. Compaq Deskpro Computer. Philips Magnavox Monitor. Specifications: X-Axis Travel: 3" Y-Axis Travel: 3" Z-Axis Travel: 2" Rotary Table Rotation: 360 deg. Spindle Speed: 40.000 RPM. Spindle Taper: ER8. Spindle Drive Electrical: 380 Volt. Three Phase. Servo Module. Computer, Monitor Electrical: 115 Volt, Single Phase. Work Table: 60" x 30" x 32-1/2" tall. Overall Dimensions: 72" x 30" x 56" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SWEET! CUSTOM AEROTECH 4-AXIS CNC BENCHTOP MILLING MACHINE w/ ROTARY TABLE SWEET! CUSTOM AEROTECH 4-AXIS CNC BENCHTOP MILLING MACHINE w/ ROTARY TABLE SWEET! CUSTOM AEROTECH 4-AXIS CNC BENCHTOP MILLING
Used Kurt Anglock Milling Machine Vise in good working condition. Made in USA. A couple marks here and there as every milling vise has but functions as it should. Jaws are 6" wide. VERY heavy. Over 70 lbs. Will ship in 2 boxes to save YOU on shipping and MY back. Last 2 pictures show what will come in each box. If you don't think you can assemble this vise please don't bid. What you see is what you get. Ask questions BEFORE bidding. Shipping to USA Address Only.
MILLING MACHINE THE JAW WIDTH IS 6" JAW OPENS 5" JAW HEIGHT IS 13/4. THERE IS A 4-1/2 JAW ADDED ON TOP OF IT. WE ARE NOT SURE WHAT BRAND NAME THIS IS. IT DOES HAVE"150" ON THE FRONT SIDE OF IT. WORKS GREAT! IT IS MISSING THE BACK JAW& ALSO MISSING THE HANDLE! THIS ITEM HAS BEEN OUT OF THE BOX AND CHECKED. WORKS GOOD. I try to be as accurate as possible with descriptions. However. If you feel. I have made a mistake. Please let me know before leaving negative feedback. Thank You. RETURN POLICY: We accept returns for a refund if the item is shipped back within 14 days of delivery. Due to our fluctuating inventory. We cannot however do exchanges. Returned items must be in new, unused condition unless otherwise stated in the description. Shipping fees are non-refundable and buyer is responsible for returned shipping fees. ... moreAlthough not lightly and very rare, if there is ever an error on our part or a manufacturing defect with your order, we will gladly cover any shipping expenses. COMMUNICATION: We check eBay messages frequently. Multiple times a day. Feel free to message me if you have any questions or concerns. Please use eBay messages to contact us instead of regular mail, because it is checked more often and less likely to be lost. THANK YOU FOR SHOPPING!
Parlec Cat40 C40S-18DC3 9144 Milling Machine Collet Chuck Holder This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with USPS Priority Mail. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. gsrx_vers_486(GS 6.5.1(486)
Title: Heavy Duty 6" Pneumatic Milling Machine Air Vise Description: Our Internal Stock# L1-2(2/15/13 dan) You are about to purchase the following item: 6" Wide Vise Pneumatic Production Vise 1/8" Opening and Closing of Jaws Max Opening- 6" Adjustable Jaw Opening. Two Allen Bolts to Tighten or Loosen Adjustment to Opening 1" Diameter Guide Bars 3-1/2" Distance Between Guide Bars 1-3/4" Jaw Height InsideGuide Bars Overall Length- 18" This Unit has a Pedestal that was Mounted on the Outside of the Saddle. Could be Removed(see pics) Was Pulled From a Chevalier(Bridgeport) Milling Machine This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may ... morebe representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and payed for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipp
aims ALL PURPOSE MILLING MACHINE VISE- 2-1/2" CAP. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is an All Purpose Milling Machine Vise in good condition. Features: Hardened vise bed. Hardened jaw plates. Semi-hard steel screw. Equipped with V-Groove. Specifications: Jaws: 2-1/2" wide x 1-1/2" deep. Vise Capacity: 2-1/2" V-Groove Capacity: 1/8" Overall Dimensions: 8-1/2" x 2-1/2" x 2-3/4" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ALL PURPOSE MILLING MACHINE VISE- 2-1/2" ... moreCAP. ALL PURPOSE MILLING MACHINE VISE- 2-1/2" CAP. Reliable Tool Inc. c 2011 | Powered by
This will fit the heavy 10" South Bend Lathe. Listed as used but I believe it is new with shelf wear. This is very snug with less than.005 backlash on the adjusting screw. No damage. No abuse, no wear but needs a cleaning and a paint job. Comes with the original crank and wrench. Ships in a large flat rate box.
We Have Thousands Of Machine Manuals. Instruction Manuals. Machinery Maintenance Manuals. Parts list. Service Manuals. Machinery Brochures And Schematics For Sale. We Are Proud To Provide Service To The Metalworking. Chip Making and Fabricating Machine Tool Manual Needs. We Take Great Pride In Getting You The Correct Manual For Your Machine. Let Us know Your Serial Number. And Model Number. We Guarantee That We Will Get You a Correct Manual or Your Money Back! Each Manual Is Comb Bound For Easy Reading On A Flat Surface Such As a Table or Workbench. We Have Collected These Manuals Over Many Years And Continue To Look For More Every Day. Our Customers Have Been Pleased With Our Manuals. Schematics, Parts List, Service Manuals, Maintenance Manuals, Instructions Manuals And Brochures. They Are Filled With Invaluable Information, Sometimes Not ... moreEven Available Direct From The Manufacturer. We Are Often The Last Resort. We Take Pride In This Fact. We Are Here To Fulfill Your Industrial Machinery Manual Needs Today. Email Us Today! Instruction Manuals. Maintenance Manual, Operation, Operator, Parts List, Repair, Service, Schematics, Tooling, Lubrication, Programming. Industrial Machinery Manuals Is Proud To Offer 1 Digitally Enhanced Quality Bound Copy Of A: Sundstrand 33 Rigidmil Milling Machine Installation. Operations& Maintenance Manual Year(1941) This Manual Covers Models: No. 33 33 This Manual Includes: Installation Nomenclature Lubrication Floor Plan and Dimensions Spindle Head Assembly Table Feed Unit Coolant System Electrical Controls Pendant Vertical Feed Attachment This Manual Has 25 Printed Pages. Year 1941-We Ship Domestically via USPS First Class or Priority Mail ABSOLUTELY FREE! Delivery Time Usually 1-5 Days. If You Need a Product Faster. Please View The Shipping Calculator Below For Options. Other Options: UPS Overnight Next Day Air. UPS 2 nd Day Air. We Ship Internationally Only To Canada And Mexico. $8.00 S& H Fee Applies To International Shipping. All other international shipping must
aims U.S.A! KURT HEAVY DUTY MILLING MACHINE VISE& KEY read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Kurt. This is a Heavy Duty Milling Machine Vise& Key in GREAT condition. Model# D60-1 Features: Hardened vise bed. Semi-hard steel screw. 80.000-PSI(approx. ductile iron body. Specifications: Jaw Width: 6-1/8" Jaw Height: 1-3/4" Max. Opening: 5-1/2" Overall Dimensions: 18-1/2" x 9" x 5" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! KURT HEAVY DUTY MILLING ... moreMACHINE VISE& KEY U.S.A! KURT HEAVY DUTY MILLING MACHINE VISE& KEY U.S.A! KURT HEAVY DUTY MILLING MACHINE VISE& KEY Reliable Tool Inc. c 2011 | Powered by
aims HEAVY DUTY MILLING MACHINE VISE W/ 360 Deg. SWIVEL BASE& KEY read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Heavy Duty Milling Machine Vise with 360 Deg. Swivel Base& Key in GREAT condition. Model# A60 Features: Hardened vise bed. Semi-hard steel screw. 80.000-PSI(approx. ductile iron body. Specifications: Jaw Width: 5-1/8" Jaw Height: 1-1/2" Max. Opening: 4" Overall Dimensions: 15" x 11" x 5-1/2" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HEAVY DUTY MILLING MACHINE ... moreVISE W/ 360 Deg. SWIVEL BASE& KEY HEAVY DUTY MILLING MACHINE VISE W/ 360 Deg. SWIVEL BASE& KEY HEAVY DUTY MILLING MACHINE VISE W/ 360 Deg. SWIVEL BASE& KEY Reliable Tool Inc. c 2011 | Powered by
4.3/4" Swivel Base Milling Machine Vice for Restoration. Rusty, No Handle Approx 14" long. 12" wide, 5" Tall. Jaws approx 4.3/4" Circlip on screw needs attention. Rusty and nee ds a clean. Part of our ongoing stores clear out of usefull items which may be rusty. Need cleaning. incomplete etc. Carriage charge is for mainland UK. If you live in the Highlands or Islands please enquire before purchase. Collection from our premises can be arranged also. Will post abroad but shipping will be expensive.
vintage milling table clamps. let me kno which size t slot bolts u need. I'll include it for free if i have some in my bin of tools. MADE BY: General Alliance Corp. San Diego California.
Gold International Machinery Corporation | Hartford 2 HP. Variable Speed Ram Type Vertical Turret Milling Machine, S/N: 791578 Our Inventory Number: 0338-470 Technical Specifications: 230V/3PH/60HZ, Motor: 2 HP, Built 1979, Table size: 9" x 42" Longitudinal table travel: 30" Cross travel: 12" Vertical travel of knee: 16" Vertical capacity: 0- 18" Throat size: 6-3/4" minimum to 18-3/4" maximum, Spindle: R8 taper, Drilling capacity: 3/4" manual/ 3/8" power feed, Quill travel: 5" Spindle speeds: 60- 4200 RPM(variable) Overall dimensions: 76"w) x 63"d) x 77.5" high, Estimated weight: 2130 lbs. Equipped With: Longitudinal power table feed, 6" Bridgeport milling vise with swivel base, This item is in very good condition! We can palletize. Cover and load this item for an ... moreadditional $175. We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment
You are bidding on a UNIMAT#SL-1000 PRECISION LATHE MILLING MACHINE DB200 W/ CASE& ACCS.This is in good working shape. From the list of parts that I have the only thing it doesn't have is a#7 Steel Vertical Column. 8 a vertical column Headstock Adapter,9 a 3- jaw Universal Lathe Chuck, and a#17 One drive belt. every thing else is included. This was not used very much as I am told. If you have any questions on this sale email me before you bid. I do not except returns. I pack very well. Insurance can be added at an additional cost to the buyer. Notify me by email if insurance is wanted. I will have other stereo speakers, equipment and slide equipment that I will be listing so keep me on your favorites. I am selling these for a friend. Happy bidding.
PRECISE GRINDER MODEL JM 114- for Jig Borer or Milling Machine PRECISE GRINDER- for Jig Boorer or Milling Machine Model JM 114 Motor: 115 Volt 5.6 Amp Motor: 1/2 HP Speed: 45.000 RPM Motor: 115 Volt 5.6 Amp Included Equipment: Msc parts Case* RETURN POLICY: This purchase comes with a 14-days money back guaranteed. SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all shipping fees on return UNLESS we ship the wrong item. All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused. Please contact seller by email for the RMA# CONTACT US For all questions or issues please email us at parts@robonex.com* or Call us M-F 9:00 am to 5:00 pm EST at(330) 408-5353* PAYMENTS: PayPal- We accept Visa/MasterCard. Discover and Amex through PayPal only. For personal checks please send your checks ... moreelectronically via PayPal. If you make the payment through PayPal. We can ONLY ship to your PayPal confirmed address. No exceptions. Payment must be received within 5 days or a Non Paying Bidder Alert will be filed. FEEDBACK: Feedback is an integral part of eBay. Please leave feedback for us on eBay and we will do the same for you. If you are considering leaving us negative or neutral feedback. Please give us the opportunity to resolve the issue first. We will try our best to help you. Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-140879d5c52-0x105-
I've owned this for several years. Pretty cool tool if your looking at this then you know what it is. Local pickup only. I just had surgery so I am not able to lift nor help lift. As long as its paid for I don't have a prob storing it for a reasonable amount of time if it helps the buyer out. Posted with
We were emailed this is a adjustable motor mount marked Browning Maysville Ky. It measures about 14" Almost all the items we sell are USED unless otherwise stated. That means they are not going to look brand new. It is your responsibility to read the description and ask questions before bidding. Shipping charges are listed below and are for lower 48 states. Alaska and Hawaii will be figured at the end of auction. We will combine shipping. As long as the items can be shipped together without causing damage. We usually ship by UPS(unless otherwise stated) and require a street address for shipping. Almost all items are shipped with insurance. Unless otherwise stated. We ship only to a U.S. address. Thanks for looking and check out our other auctions. Normal 0 false false false EN-US X-NONE X-NONE
You are bidding on a used manual or a copy of a used manual for M-30 K&T Milling Machine Milling Chaser Threads for M-2012 Free Shipping to USA These manuals come from machine repair facilities that have closed or sometimes they are from a life time collection of a machine shop owner. Many of these manuals include notes. Schematics and parts list that are very valuable. They can save you hours or even days of labor when you are troubleshooting or repairing a machine. Click here to see our other 1400 items! Our reference Number& Location is Please Read Before Bidding My Buying& Selling Terms Payments I accept Paypal. Please pay ASAP. If you have reasons for a delay let me know. My Shipping Policy If the ad says free shipping. It’s for the lower 48 states only. All others will be charged accordingly by location. Resolution of Problems ... moreIf there are any problems with this sale contact me via email and I will solve the problem. I take pride in customer satisfaction. My Return Policy Ebay Store Description All Sales Are Final. Please ask questions first. If I don’t know the answer I will find more info for you. Even if the item ends while I’m finding the answer keep in contact because I will be relisting it for you. http:stores.ebay.com/Your-Surplus-Riches What you see in the picture is what you will receive. Unless additional parts are mentioned in the ad, assume there are none.
Cincinnati Cincel 60 Milling Machine Manual Cincinnati Manual for Cinel 60 Milling Machines Publication No. M-2447 You need a manual if you have one of these popular medium size Cincinnati horizontal milling machines. NOTE: You are buying a high quality COPY of the publication shown in the photo. Printed on heavy stock. We SPECIALIZE in parts and tooling for CINCINNATI milling machines! ITEM# IMG157 All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. ... moreSHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
marked as used but not sure i think its new not 100% sure
Used Cincinnati Horizontal milling machine 8"X27" table with 6" vise. This machine runs fine all functions work including power feed on the table. Powered by a 5HP 220v 3 phase motor with disconnect and drum switch. Includes 7ea misc. change gear. 14ea 50 taper arbors, 180 lbs of cutters all sizes, and a box of spacer collars. Some of the tooling has minor rust but all oiled. This machine is flat belt drive, the tensioner had been repaired see photo. Machine weighs about 2500 lbs, has coolant pump that was not tested. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Email me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction ... moremay be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with eBay Mobile. Posted with
tool holder for milling machine
HERE WE HAVE AN IMPORT FINE FEED HANDWHEEL. FOR A BRIDGEPORT OR BRIDGEPORT CLONE PRICE IS FOR 1.THERE ARE 2 AVAILABLE HOLE DIAMETER IS.506 OR 13 MM I HAVE OVER 1000 ITEMS IN MY E BAY STORE. IF YOU CAN NOT FIND WHAT YOU WANT. JUST ASK. Visit store: G and G MACHINERY If you have any questions contact Gerry at 727-547-0616 WE WELCOME INSPECTIONS AND CUSTOMER PICK UPS WE ACCEPT ALL MAJOR CREDIT CARDS! BUYER I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping, and the item is shipped, YOU, the BUYER, are now responsible, along with the shipping service provider for ... morethe item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges, such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 46 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Buy with confidence! On Jul-31-13 at 21:23:54 PDT. Seller added the following information:
Milling Machine Tools Qty 17 Some of these are new. Some are used Sizes Range from 1/8 to 2 1/2
ANTIQUE HORIZONTAL MILLING MACHINE. IT WAS BUILT BY THE CINCINNATI MILLING MACHINE COMPANY APPROXIMATELY 113 YEARS AGO. THE PATENT DATES ARE AS FOLLOWS: JANUARY 5 1886. MAY 8 1887, JANUARY 30 1894 FEBRUARY 11 1896 AND OCTOBER 2 1900. THE MACHINE HAS BEEN IN MY FAMILY FOR THE PAST 100 YEARS. IT WAS ORIGINALLY IN MY GRANDFATHERS' MANUFACTURING FACILITY IN NEW YORK CITY. IT WAS RUN OFF AN OVERHEAD FLAT LEATHER BELT SYSTEM UNTIL THE 1930'S. AN ELECTRIC MOTOR WITH AN TRANSMISSION WAS MOUNTED TO THE TOP OF THE MACHINE TO MODERNIZE IT. THE MOTOR AND TRANSMISSION WERE CLAMPED ON AND CAN EASILY BE REMOVED, RETURNING IT TO THE ORIGINAL CONFIGURATION. THE MILL IS IN OPERATING CONDITION WITH A NEW FLAT LEATHER DRIVE BELT. THE MILL CAN ALSO BE CONVERTED TO A VERTICAL MILL BY ATTACHING THE ELECTRIC VERTICAL POWER HEAD, WHICH IS INCLUDED. ALSO INCLUDED ... moreARE SEVERAL HORIZONTAL CUTTERS AND AN EXTRA PULLEY. THIS IS AVAILABLE ONLY FOR LOCAL PICKUP IN THE LAS VEGAS NEVADA AREA. THIS SALE IS FINAL, NO REFUNDS OR RETURNS.
Atlas horizontal milling machine gib handles and over arm lock handles.the round one isnt original but was used as a gib lock.the overarm lock in the second pic may need a tap run through it
Atlas horizontal milling machine gear cover/door with speed chart.Good condition.
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number:26977. Cincinnati. Horizontal Production Mill MODEL NUMBER: 1-18 SERIAL NUMBER: 2F1P1K-508R GENERAL SPECIFICATIONS 10" x 41" Table Size 18" Table Travel 8" Knee Vertical Adjustment 10" Max. Distance Spindle Center to Table Top 2-3/8" Cross Quill Adjustments 50-1500 RPM Spindle Speeds 3/4" 30 In/Min Table Feeds No. 40 Spindle Taper EQUIPPED WITH 3 Hp 220/440/60/3 Motor Magnetic Push Button Controls 1-Over Arm Support Casting Shipping Weight: 3000 Lbs. Shipping Dimensions: 47" x 68" x 67" Tall F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items ... moreare offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding
SOTTOF SALES Good working condition. Comes as shown. Removed from a Bridgeport J Head Mill with a head serial number of J103110. D3764.3 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items ... morewill be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
SOTTOF SALES Comes with all parts shown so please look carefully at the photos. The end of the shaft on the feed reverse knob end is buggered up, may be repairable or not, the rest of the parts are in working condition. Removed from a Bridgeport J Head Mill with a head serial number of J103110. D3763.2 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit ... moreor payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
SOTTOF SALES Includes everything shown. Please look carefully at all the photos as this is what you will receive, parts are in good used condition. Removed from a Bridgeport J Head Mill with a head serial number of J103110. D3762.2 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) ... moreis/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
Browne and Sharp Horizontal Mill Tooling. Includes arbors. Inserts, and a large number of cutters. Available for local pickup or will ship for additional cost.
good used nmtb 30- DA180 collet chuck with Q/C flange Erickson USA 2-10-207-189 no collet please check my other auctions and happy bidding! FREE FAST SHIPPING ANYWHERE IN THE USA Powered by The free listing tool. List your items fast and easy and manage your active items.
good used nmtb 30- DA300 collet chuck with Q/C flange Erickson USA 2-10-207-309 no collet please check my other auctions and happy bidding! FREE FAST SHIPPING ANYWHERE IN THE USA Powered by The free listing tool. List your items fast and easy and manage your active items. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1409f03df2a-0xf5-
good used nmtb 30- 1" end mill holder with Q/C flange Erickson USA 2-60-207-107 please check my other auctions and happy bidding! FREE FAST SHIPPING ANYWHERE IN THE USA Powered by The free listing tool. List your items fast and easy and manage your active items.
aims 3 MILLING MACHINE R8 COLLET DRAW BARS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 3 Milling Machine R8 Collet Draw Bars in good condition. These Draw Bars individually sell for over $35.00 each. Specifications For R8 Collet. Threaded Ends: 7/16" 20 tpi. Hex Size: 3/4" Overall Lengths: 19-7/8" 20" 20-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 3 MILLING MACHINE R8 COLLET DRAW BARS Reliable Tool Inc. c 2011 | Powered by;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-140a0457692-0x108-
Misc Milling machine bits.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-140a0f3d3fa-0xff-
Misc 3 flute Milling machine bits
You are buying a used. In good working condition lathe and milling combo, made by Emco, with a 4-Jaw chuck. Plus a second lathe, used, in working condition, also Emco Compact 5- with a 3-Jaw chuck. I ncludes: Emco Compact 5 Lathe Emco Compact 5 Lathe& Milling Combo All accessories as shown in pictures Serious inquiries only. Sold as is. Shipping within the USA only. Lathe will be shipped in 3 boxes. Payment: $500 is required upon end of auction via Paypal. The remainder balance of $1.500.00 is required by CASHIERS CHECK and mailed within 72 hours of auction end. Once payment is received- items will be shipped promptly. No personal/company checks allowed. ONLY CASHIERS CHECK.
I have a Grizzly G0704 that I purchased in May of 2012. I have barely used it at all since I went off to college the following August and haven't returned since. I have put less than 10 hours on this machine. I was planning on converting it to a CNC mill, but I simply don't have enough money to justify owning this machine anymore. It is in perfect working condition, the axis lock handles are not adjusted and therefore do not work, but some simple adjusting should fix that. I used lapping compound to lap the ways, helping to improve the accuracy. It has been stored in a climate-controlled garage for the last year. Most of the dirt in the pictures is from a piece of wood that I milled, the wood stuck to the oil on the vise and the machine making it looks much dirtier than it actually is. I also built an enclosure to keep chips from ... moreflying behind the machine, it worked extremely well and the mill can come with or without the enclosure. I had planned on painting the wood with outdoor paint and using coolant in the machine, that was another reason I built the enclosure. The mill specifications are Motor: 1 HP. 110V, 3.2A, single-phase, Spindle taper: R-8, Spindle travel: 2" T-slots: 3@ 2-1/2" centers. 1/2" wide, Head travel: 11" Head tilt: 90° L/R, Max. distance spindle to table: 13" Swing: 15" Table travel(longitudinal) 18-7/8" Table travel(cross) 6-7/8" Table size: 7-1/16" x 26-5/8" Spindle Speed: 50–2250 RPM, And features Dovetail column, Safety shut off switch, DRO on spindle, Fine feed head control, 2-Speed gearbox, Clear guard on spindle, Rubber chip guards on ways, Zero setting dials, Dials read inches, Forward/Reverse switch, Stand with chip tray and cabinet measures 16" L x 16" W x 31" H, The machine comes with the basic tools needed to assemble and disassemble it. Including a 8, 10, 12, and 14mm wrench, a drawbar tool to release the collet from the spindle, two extra t-slot clamps, an extra axis lock handle, an extra handwheel hand
aims NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Chung Hsiwh Industrial Co. Ltd. This is a Variable Speed Mini Vertical Milling Machine in GREAT condition. Model# CH-10M Serial# 2203 Specifications: Table: Surface Area: 15-1/4" x 3-3/4" T-Slots: 3@ 1-1/8" centers T-Slot Sizes: 15/32" Travels: X-Axis: 9" Y-Axis: 4" Z-Axis: 8" Spindle: Quill Diameter: 1.56" Spindle Taper: 3 Morse Taper Spindle Center to Back Column: 6" Spindle/ Column Tilt: 45- 0- 45 degrees Spindle Nose to Table: 1/2" minimum/ 11" maximum Spindle Speed Range: 200- 3.000 rpm. Capacities: Drilling Capacity: 1/2" End Mill Capacity: 1/2" Face Mill Capacity: 3/4" General: Motor: ... more500 Watt. 90 VDC, 4,000 rpm, 7.5 Amp, 50/ 60 Hz, Single Phase Electrical: 110 Volt. Single Phase Overall Dimensions: 18" x 17" x 33" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M Reliable Tool I
1960's Brown and Sharpe Dynamaster 203 horizontal milling machine. Looks better in person. Works flawlessly, travels with feed in all axis. Purchased 2 years ago to produce custom H Pitch Pulley stock for prototyping. Has been oiled every so often in a climate controlled shop, but not used in the last 6 months. The machine is still set up for for cutting H pitch pulley stock and will sell it"as pictured" for an extra cost. Recently rebuilt Indexing table with like new Buck Chuck(purchased new for this application) can be left on since it is dial indicated for precision along with the dead center for the extra cost(along with a new cutter. If the buy it now is used, Machine will come as Pictured. Coolant pump was just rebuilt, so this machine is ready to produce for years in its new home. If buy it now is not used, Item will ... moresell with everything except what is mounted to the table and the cutter. 1 1/4" arbor included. Item can be seen under power at my shop in Joliet, IL. Please call Mike at 708 932 6636 to set up an appointment.
This Machine was Built New in 1995. It Runs as Good as it Looks. Can be used as a(2) axes CNC vertical milling machine or as a conventional vertical milling machine. Now for sale and available for your inspection at our warehouse in beautiful downtown Miamisburg. Ohio is this"EXCELLENT" SuperMax Model YCM-40, Vertical Knee Type. CNC Milling Machine complete with a SuperMax. 2 Axes Conversational or G-Code CNC Controller S/N 503678. You just can't go wrong with this machine. This machine tool was built in Tiawan by one of that countries premier machine tool builders. The 2 Axes CNC controller is the very desirable SuperMax CNC-20 with Conversational or G-Code. The table does have a half a dozen operator errors. Other than that. The condition is SUPER. Specifications for this machine are as follows: Spindle Drive Motor: 3HP Spindle ... moreSpeeds: 60 RPM to 4.200 RPM, Infinately Variable Table Size: 9" X 49" Longitudinal Travel(X axis) 37" Cross Travel(Y axis) 16" Knee Vertical Travel(Z axis) 5" + 16" Knee Travel Ways: Box Ways. Hard Chromed and Ground Spindle Taper: R-8 Quill Power Feeds: 0015" 003" 006" Quill Travel: 5" Maximum Table Load: 580# Overarm Travel: 19" Weight of Machine: 2.400# Accessaries include: Manuals. Auto Oiler* We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge. You always buy with confidence at Machine Tools of America. First of all. Our descriptions are as accurate as we can possibly make them, and we've been describing equipment for long
CHECK OUT THIS TOOLING PACKAGE! TURN KEY READY! HERE IS A NICE RUNNING. LIGHTLY USED SUPERMAX MILLING MACHINE. THIS MILL CAN BE INSPECTED UNDER POWER IN MPLS MN. TO SET UP AN INSPECTION PLEASE CALL JIM@ 952-931-7974. NOTE: THIS MACHINE CAME OUT OF A ONE MAN SHOP AND IS LOADED WITH TOOLING! CHECK OUT THE CHROME WAYS! YCM SUPER MAX VERTICAL MILL MAKE: SUPER MAX MODEL: YCM-1-1/2 VS SERIAL NO: 90720351 YEAR: 1991 GENERAL SPECIFICATIONS: TABLE LENGTH-WIDTH.42" X 9" LONGITUDNAL TRAVEL(X)29-21/64" LONGTUDNAL TRAVEL(WITH POWER FEED UNIT)26-3/16" CROSS TRAVEL.12" KNEE TRAVEL.16" QUILL TRAVEL.5" SPINDLE SPEEDS(VARIABLE)60 TO 4200 RPM POWER FEED PER SPINDLE REVOLUTION.0017-0032-0053 SPINDLE TAPER.R8 HORSE POWER.2 HP ELECTRICS.220/ 3PH WEIGHT.2500 LBS APPROX EQUIPPED WITH: CHROME WAYS. SONY MAGNA SCALE 2 AXIS DIGITAL ... moreREAD OUTS, 6" MACHINE VICE, R8 RIGHT ANGLE HEAD ATTACHMENT, 8-1/4" HORIZONTAL- VERTICAL ROTARY TABLE WITH 3 JAW CHUCK, TAIL STOCK SUPPORT FOR ROTARY TABLE, HORIZONTAL ARBOR SUPPORT AND HORIZONTAL ARBOR FOR CUTTING, 10" T SLOTTED TILTING SINE PLATE, SET OF R8 COLLETS, DRILL CHUCK W/HOLDER, BORING BAR W/HOLDER, FACE MILL W/ HOLDER,SPADE DRILL W/ HOLDER. PRICE LOADED ON YOUR FLATBED.$7450.00 SOLD AS- IS AS INSPECTED.
` QUALITY NEW AND USED CNC AND MANUAL MACHINERY INCLUDING MILLS AND LATHES. CENTROID, ANILAM, FANUC, CHECK US OUT FOR TOOLS AND SUPPLIES CHARNEY MACHINE& TOOL. INC 160 84th STREET SW BYRON CENTER. MI 49315 616-455-3800 2005 Milltronics RH15 CNC Bed Milling Machine Vertical Machining Center Centurion 7 CNC Control Our Stock Number 1266-042512 Machine Description Milltronics RH20 CNC Vertical Bed Mill Centurion VI CNC Control Year: 2001 Serial# 5525 Specifications: are accurate to the best of our knowledge) Table Size 16" x 54" Travels- XYZ 40" x 20" x 24" Table Weight Capacity 2500 Lbs. Spindle Taper CT40 Spindle Speeds 100 to 6000 RPM Spindle Motor 15 HP Rapid Traverse XY/ Z 500/ 400 IPM Feedrates.0 to 200 IPM Approx Floor Space 98" x 68" Weight. Approx 7000 Lbs. Power 220V/3 Phase This machine is in ... morevery good working order and can be seen under power at our location. Byron Center. MI Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& MasterCard accepted thru PayPal only. Personal checks accepted. Allow 10 business days to clear this payment. No exceptions. Charney Machine& Tool. Inc. reserves the right to re-list this auction if payment is not made within 10 days of the auction end. Wire transfer is preferred. Warranty and Terms 14 Day Return Warranty. Batteries a
This auction is for the Bridgeport j-head milling machine as seen in the pictures(the cast iron table is in another listing) This Bridgeport was removed from power about a month ago and was sold because it was seldom used. It is a 3 phase machine and I currently do not have 3 phase power. Feel free to ask any questions you may have but keep in mind I am only a hobby machinist. Please look at the pictures carefully. This is a solid machine and it does have some table marks. It is about 60 years old. Back when they actually made something to last. I am located a little over an hour north of Nashville Tennessee. I can load for free. Please see my ebay store page for direct contact information. Thanks for looking and please see my other auctions. I have a heavy cast iron table that would go great with the milling machine. Posted with