In 
 
Order by: 
Available to: 
Price: 
 - 
$
2,089.05
Buy It Now
$0 Shipping
Condition: New
Location: Rancho Cucamonga,CA,USA
$
15,999
Buy It Now
$0 Shipping
Condition: New
Location: Pittsburgh,PA,USA
$
7,599
Buy It Now
$0 Shipping
Condition: New
Location: Grand Forks,ND,USA
CPO Model 321101AK. List Price: $6.999, CPO Price: $5.939, You save: $1.060(15% Availability: In Stock, One of the most popular JET.Lathes now comes with ... morean enclosed gear box, Enclosed gear box design provides smooth. Quiet operation, Fast. Easy speed changes, Hardened and ground gears are featured in the headstock and gearbox, D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings, Headstock is constantly oiled during operation, Gear box gives wide inch threading and feed capabilities with no gear changes, V-way bed design is induction hardened and ground, Gap bed section provided for larger diameter work, Independent lead screw and feed rod, Number of Metric Threads, 27, Steady Rest Capacity, 2-5/8-in, Follow Rest Capacity, 2-3/4-in, Spindle Taper w/ Sleeve, MT5(MT-3) Swing Through Gap, 18-3/4-in, Compound Slide Travel, 2-11/16-in, Number of Longitudinal and Cross Feeds, 40, Range of Spindle Speeds, 70- 2.000 RPM, Spindle Bore, 1-3/8-in, Range of Metric Threads, 02- 6 mm, Motor, 2 HP. 1 Ph 230V, Maximum Tool Size, 5/8-in X 5/8-in, Length of Gap, 8-in, Number of Inch Threads, 40, Cross Slide Travel, 6-5/16-in, Spindle Mount, D1-4, Swing Over Cross Slide, 7-25/32-in, Range of Cross Feeds, 0012- 0345 in.rev. Carriage Travel, 35-in, Distance Between Centers, 40-in, Range of Inch Threads, 4- 112 TPI, Weight, 1215 lbs. Number of Spindle Speeds, 8, Range of Longitudinal Feeds, 0036-0325 IPR, Lathe w/ CBS-1340A Stand- 321101AK, 2-Year, For full warranty information. Please contact us at 800-714-0969* Warranty valid for US customers only, Orders outside the US are not protected by manufacturer warranty. All orders are still covered by CPO's 30-day Money Back Guarantee) Shipping and customs charges for non-US orders will be calculated when the item is added to cart, All corded products are designed to work with North American 110/120V outlets only. Products used in foreign outlets without proper use of a voltage adapter/converter will not be covered b
$
6,950
Buy It Now
$0 Shipping
Condition: Used
Location: Holland,OH,USA
$
15,899
Buy It Now
$916 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
15
0h 28m 46s
1 bids
$8 Shipping
Condition: Used
Location: Morrisdale,PA,USA
Up for bids is a ATLAS/ Craftsman 10 In. 12 In. LATHE 56(56A) TOOTH CHANGE GEAR in great condition with no chipped teeth. Very moderate wear. If you have ... moreany questions feel free to ask. Buyer pays shipping in the US. Thanks for looking and have a great day.
$
21,499
Buy It Now
$1,017 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
17,500
Buy It Now
Free Shipping
Condition: Used
Location: Chatsworth,CA,USA
$
18,499
Buy It Now
$916 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
1,990
Buy It Now
Free Shipping
Condition: Used
Location: Glassboro,NJ,USA
$
21,199
Buy It Now
$891 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
4,450
Buy It Now
Free Shipping
Condition: Used
Location: Toledo,OH,USA
$
7,439
Buy It Now
$0 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
19,900
Buy It Now
Free Shipping
Condition: Used
Location: Chatsworth,CA,USA
$
22.19
Buy It Now
$0 Shipping
Condition: New
Location: Los Angeles,CA,USA
$
4,000
Buy It Now
$0 Shipping
Condition: Used
Location: Rockford,IL,USA
$
3,500
1d 18h 0m 25s
0 bids
$0 Shipping
Condition: Used
Location: Vista,CA,USA
$
453.43
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
3,500
Buy It Now
Free Shipping
Condition: Used
Location: Lancaster,PA,USA
$
21,599
Buy It Now
$891 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
9,950
Buy It Now
$0 Shipping
Condition: Used
Location: Huntington Park,CA,USA
$
39.99
4d 0h 36m 30s
1 bids
$8 Shipping
Condition: New – Open box
Location: Cambridge,OH,USA
$
12,500
Buy It Now
Free Shipping
Condition: Used
Location: Toledo,OH,USA
$
1,089.99
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
2,750
Buy It Now
$0 Shipping
Condition: Used
Location: Mount Vernon,IA,USA
$
1,000
3d 23h 30m 34s
0 bids
$30 Shipping
Condition: Used
Location: Brooks,ME,USA
$
1,295
Buy It Now
$0 Shipping
Condition: New
Location: Hayward,CA,USA
$
15,000
Buy It Now
$0 Shipping
Condition: Used
Location: East Haven,CT,USA
Metal Spinning Lathe This is an older but good heavy duty custom made Metal Spinning Lathe, that is build like a battleship. Belt driven by motor assembly ... morethat mounts on top of lathe. That pivots to move belt for different speeds. All are approx: Length: 85" Width: 33" at base Height: 76" without motor and 91" with motor assembly Motor assembly: 26" wide by 39" long Swing from center to bed 18" So a working radius of 36" Motor: 8hp 3ph Weight about: 1800 lbs- 2400 lbs. Is a guess only Sold AS-IS Lathe and motor assembly is on ground level and will need a forklift to pick up and load. We do not have loading equipment. Local pickup only(no shipping)
$
18,999
Buy It Now
$916 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
7,950
Buy It Now
Free Shipping
Condition: Used
Location: Toledo,OH,USA
$
21,899
Buy It Now
$1,017 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
44,500
Buy It Now
$0 Shipping
Condition: Used
Location: USA
$
18,499
Buy It Now
$0 Shipping
Condition: New
Location: Pittsburgh,PA,USA
$
6,800
Buy It Now
$0 Shipping
Condition: Used
Location: Salisbury,MA,USA
Atlas Craftsman 10" metal lathe Turret in good used condition Please take a minute to browse our store to see what other treasures we might have ... morethis week. I will combine shipping when possible. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make other arrangements for payment. Please be aware that I ship as soon as payment is received. If you change your mind about the item after it is shipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others, please contact me if you have not received your item within 30 days. Please do not ask me to mark items with a lower value or mark as a gift. US and international government regulatio
$
452.88
Buy It Now
$0 Shipping
Condition: New
Location: Memphis,TN,USA
$
6,000
Buy It Now
$0 Shipping
Condition: Used
Location: Warren,MI,USA
LeBlond Regal Toolroom Engine Lathe. 19" x 54" Lathe with 7.5 HP and Taper Attachment Specification Description Swing Over Bed, 19.25" ... moreSwing Over Cross Slide, 12.25" Center Distance, 54" Spindle Speeds, 12, Spindle Range, 40- 1.800 RPM, Spindle Hole, 1.75" Spindle Nose, L-1, Feeds(48) 2- 112 T.P.I. Motor, 7.5 HP, Weight. Approx, 4.500 Lbs. Approx. Dimensions, 110" x 50" x 65" H, Equipped With: 12" 4-Jaw Chuck. Carriage Stop, Hardened Bedways, Threading Dial, Taper Attachment, Geared Head NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. Warranty USED EQUIPMENT: 30 day return privilege per MDNA. We suggest you Inspect All Used Machinery Prior to Purchase. This machine needs to be shipped via a flat-bed. If you wish to try to ship a different way. Please contact us to discuss before making arrangements. Dimensions and Weight should be above. Contact Erik@ 847-338-7139 if you have any questions on the machine, or shipping. NOTE: This machine can be picked up in Elk Grove Village. IL( near O'Hare)
$
12,129
Buy It Now
$0 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
7,500
Buy It Now
$0 Shipping
Condition: Used
Location: Sanger,TX,USA
$
23.95
Buy It Now
$0 Shipping
Condition: New
Location: Vancouver,WA,USA
Brand New! Description Attach this lathe chuck to the tail stock of the 7" x 10" precision mini lathe for all drilling applications. The lathe ... morechuck won’t slip and is ideal for hobby work and light duty work in the shop or garage. Capacity: 5/64' to 1/2' Mounting holes: Jacobs® taper#33 Mandrel taper: MT#2 Mandrel material: 1010 low carbon steel HFT-42340 International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Sellebrity Analytics.
$
3,800
Buy It Now
$0 Shipping
Condition: Used
Location: Salisbury,MA,USA
12"X36" Atlas/ Clausing lathe. Lathe is in working order has been cleaned and gone through. Is missing gear cover, still needs a few parts to ... morebe in full working condition. It cuts good and apron and cross feed both run well with power feed. Lathe comes with(1) Rocker style tool post holder, 1) 8" 3 jaw chuck, 1) 8" 4 jaw chuck, 1) 1/2"MT#3 Jacobs chuck, 2) face plates, 1) 1/2"spindle Jacobs Chuck,3) Lathe dogs, 1) 9/16"to 2" MT#3 Bull nose live center, 3) MT#3 Dead Centers, 1) MT#3 live center, 1) Atlas Cross feed milling attachment, 1) Atlas steady rest. Orange metal stand NOT INCLUDED. Buyer is responsible for shipping. I am willing to pallet shipment for $50.00 we have checked on shipping prices and we can send it through our business truck freight for around $500.00. Or buyer can local pickup. We have also listed this in other classifieds so listing may be pulled early if it sells through another source. Please ask questions before bidding there will be no returns accepted on this item. As is no warranty HAPPY BIDDING.
$
3,000.18
Buy It Now
$0 Shipping
Condition: Used
Location: Huntsville,AL,USA
$
599.43
Buy It Now
$267.14 Shipping
Condition: New
Location: United Kingdom
$
19,500
Buy It Now
$0 Shipping
Condition: Used
Location: Alto,MI,USA
$
1,673.17
Buy It Now
$306.3 Shipping
Condition: New
Location: Canada
$
23,000
Buy It Now
$0 Shipping
Condition: Used
Location: Houston,TX,USA
$
850
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Longmont,CO,USA
$
3,950
Buy It Now
$0 Shipping
Condition: Used
Location: Kenosha,WI,USA
$
1,471.08
Buy It Now
$0 Shipping
Condition: New
Location: China
$
17,500
Buy It Now
$0 Shipping
Condition: Used
Location: Huntington Park,CA,USA
$
59,568.85
Buy It Now
$3,404 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
16,999
Buy It Now
$0 Shipping
Condition: New
Location: Pittsburgh,PA,USA
$
1,500
Buy It Now
Free Shipping
Condition: Used
Location: Taylor,MO,USA
$
705
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
849.99
Buy It Now
Free Shipping
Condition: Used
Location: Holland,OH,USA
$
543.51
Buy It Now
$45.61 Shipping
Condition: New
Location: Czech Republic
$
5,950
Buy It Now
$0 Shipping
Condition: Used
Location: Casa Grande,AZ,USA
More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website REC# 721(1) Used MIYANOMATIC Model MTP-4BC-2 ... moreCamless Automatic Turret Lathe; S/N#7020305BC-2 This machine is like new and has less than 800 hours of use since manufactured. However. It has been out of service for over 15 years and in a clean, dry, climate controlled warehouse since removed from a local aerospace facility. It was purchased with every possible tooling option at a cost of over $82,000. We are capable of testing, set-up programming and operation of this machine under acceptable terms and conditions. Specifications: Bar Feed(Max)6-5/16" Spindle: Type of Nose.ASA A1-8 Hole through Spindle.3-1/8" Automatic Changes.4 Steps Total Changes.16 Steps Spindle Speeds.41-1500 RPM Hexagon Turret: Swing Over Bed.11-1/2" Tool Holes(Diameter)1-1/2" Distance Between Opposite Turret Faces.9-7/8" Turret Slide Travel(Max)9-7/8" Distance Between Turret Face and Spindle End(Max)31-1/2" Distance Between Turret Face And Spindle End(Min)11-3/4" Resetting of Saddle.9-7/8" Index Clearance(Max)17-3/4" Longitudinal Feeds(Stepless)1.78"11.75" Rapid Traverse.33' Cross Slide: Height from Spindle Center.
$
700
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
25,000
Buy It Now
Free Shipping
Condition: Used
Location: USA
$
963.15
Buy It Now
$325.78 Shipping
Condition: New
Location: Czech Republic
$
19,500
Buy It Now
$0 Shipping
Condition: Used
Location: Alto,MI,USA
LeBlond Regal 37” x 96” Lathe Serial# 3H576 Asset# 9141 Specifications: Swing Over Bed 37” Distance between Centers 96” Number of Spindle Speeds 12 Range ... moreof Speeds 27- 1080 Spindle Bore 2 1/4” Headstock Length on Bed 25 3/4” Bed Width 17” Bed Depth 14 7/16” Carriage Length on Bed 26” Cross Slide Travel 13” Compound Rest Travel 4 3/4” Number of Feed Changes 48 Feed Range.0036- 205 Thread Changes 48 Threads per Inch 2- 112 Leadscrew Diameter and TPI 1 7/16” 4 Spindle Diameter(Tailstock) 3 1/8” Tailstock Length on Bed 14 3/4” Dimensions 52” x 122” Weight 7.075 lbs. Preliminary Specifications- Subject to Verification Purchasing Information: There is a chance that this item may sell locally at our facility before we take it down from Ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check and PayPal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizing separately and it is not included with the sale price. We'll quote per customer requirements. Customer shipping method& machine design. We are a stocking dealer of new and used machine tools located in West Michigan and are members of the MDNA. We have over 1.000 different manual and CNC machines in stock for both fabrication and metal cutting applications. We are always looking to buy machinery– 1 pie
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
 In 

Past Items  
 
Here is a bunch of metal working tools that I know nothing about. You can take a close look at the pictures to see what there is. You can ask questions and I will give it my best shot to answer. What you see is what you get.
a vintage micrometer! moves free!
~Set of 3 Metal Lathe Dogs~ Smallest part has#10 on one side& double diamond with#281 on reverse. Medium part has# 13& double diamond on one side& 288 on reverse. Largest part has no markings on either side. Feel free to contact me with any questions! Thanks and Good Luck Bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e9bec0446-0x103-
Set of Atlas Metalwork Tools This Lot contains:1 R Tool Holder. 1 Cut Off Tool, 1 R.H. Tool Holder, 1 Knurling Tool. All tools are stamped with Atlas Press Co Kalamazoo USA.
28 Metal Lathe Cutting Bits- No Reserve This is a group of 28 used metal cutting bits with carbide inserts brazed on or attached. The bars have different names and markings. None of which mean anything to a woodworker like me. Scroll down for photos. Important Stuff Below- Please Read(It will make the process go smoothly) Important Information If there is not a'Buy it Now’ price in the listing it is because I did not set a'Buy it Now’ price so please don’t ask for one or make an offer. I do not end my auctions early. Unless stated otherwise above. The item shown in the photos is the item being offered for sale/auction. Everything that is included in the auction is in the photo or mentioned in the description- if it is not in the photo or mentioned in the description it is not included. I am in the field(literally) Tuesdays through ... moreThursdays and do not have access to the items being auctioned so please do not feel that I am ignoring questions asked on those days. I will get the answers to you the first thing Friday morning. I don't accept bids from bidders with poor or Private Feedback. Don’t wait until the last day to ask questions- I may not be near a computer. Guarantees I am not any expert in anything. But I have a working knowledge of most of the items I sell. Unless stated otherwise in the description. All items work properly in all functions and will not arrive DOA. If the description states an item is a specific brand. Then it is that brand. I do not sell replicas without disclosing that fact in the description. If the description states an item is Gold. Then it is solid gold- not plated, filled or washed. If the description states an item is a Diamond. It is a genuine diamond- not a simulation of any type. Should the buyer feel that my description is misleading or inaccurate. The item can be returned within 14 days of receipt for a full refund less shipping and insurance Payments I will send an invoice within 24 hours of the end of an auction. If you do not receive an invoice. Please check the
For auction I have a very rare vintage Wiedenhoff metal lathe. I acquired this lathe about thirty years ago. I never had the attachment that you see in the picture but the rest of the unit is in excellent condition considering it was built in the 1940's. I used the photo only to show the attachment and I will post actual photos later today. This unit has been bead blasted and I painted it with a gray hammered look paint finish to give it a very nice metal look. The chuck and the spindle are in tact and operational. The belt pulleys are all very good and in tact. I replaced the oil cups as the originals were damaged and or missing. This is one of the nicest I have seen and isn't broken. I do not have the original electric motor as it was missing when I purchases the lathe. I will only ship to lower 48 states or to an exporter at one ... moreof the ports. Buyer to pay actual freight. Posted with eBay Mobile.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13e9e170aee-0xf6-
Description: Williams USA Metal Lathe Tool Post Holder Wrench 800 for a 13/32" hex nut in fine shape. Atlas Craftsman Logan South Bend. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority ... moreMail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
Craftsman Sears 6" Metal Lathe Model 109 Spindle 1/2" x 20 TPI Threads Atlas It comes with the woodruff key. The spindle is in nice condition with some wear. See pictures. This spindle is off of a Craftsman 6" Metal Lathe Model 109.21270. It has 1/ 2" x 20 TPI Threads. It is approximately 7 3/ 4" long. The spindle shaft diameter is approximately 9/16" The pass through hole is s lightly under 1/4" It is sol d as pictured. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 6. 8 0 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any ... morequestions.
The following auction is for a Craftsman Sears 109 6" Metal Lathe Set of 2 Change Gear Bolts 109.21270 Bolt The Change Gear Bolts are in nice used condition with some wear. They are of f of a Craftsman Sears Model 109. 21270 Metal Lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 4. 00 for USPS 1st Class Mail with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions.
The following auction is for a Sears Craftsman 6" Model 109 Metal Lathe Spindle Bearing Adjusting Nut Atlas The adjusting nut is in good condition with some wear. It works fine. It is off of a Craftsman 6" Metal Lathe Model 109.21270 See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 4.0 0 for USPS 1st Class Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*72%3F7e%3D%3E-13e9eba9a4c-0xf5-
Up for sale is this old vintage Atlas Metal Lathe Electric ~ A. C. Motor ~ 1/2 HP ~ 110 volts ~ type KB shaft/ spindle 1/2" ~ other end someone added a sleeve to make it 5/8" used. Works, missing a cover we often have more than 6 pictures with our listings. to see the 7th-12th picture. Please use the scroll bar to the right of the small pictures Please. See the pictures for the condition of this item. You may find something in the pictures that we didn't mention in the description, as we sell mostly older items. We do our best to show the defects, but sometimes they are missed. If you have questions, please ask, we respond frequently to our emails. We have a lot of vintage military and old tools in our store(Buy it Now! Check our feedback comments! We want to give you five star service. Please give us 5 star feedback or contact ... moreus. Policies: 1. We combine shipping. If you are buying more than one item. Please wait for us to send your combined invoice to pay. If shopping over more than one day. Please drop us a note to let us know you are bidding on more items. We will send a new invoice each evening. We are professionals and each of our packages will be shipped with USPS(smaller ones) that have a delivery confirmation code. Check in your"My eBay" section to see when you package has been sent, we usually send the next day, but please give is 48 hours to send after payment has been made. 2. In order to protect our buyers as well as ourselves. We only ship to the address on the paypal transaction. Please do not ask us to ship to a different address. 3. Please do not ask us to change our auctions to do a buy it now. In order to be fair to all our clients. We do not do this. Please participate in our auction. 4. Please look below the photos in our auction to see if we have answered any buyer questions that may add to the description of the item. International Shipping Information: 1. Please ask for International Shipping Prices PRIOR to bidding and check in the auction to see if this item will
I am cleaning my shop. So am selling this Italian Centauro Lathe. It will turn a piece up to 54" Please email any questions, and good luck bidding! CENTAURO MODEL TC-1200 a mechanical copy turning latheis ideal for the production of small and medium batches of stair spindles balusterstable legs and chair legs(furniture components) in general.The TC1200's double cantilever turning assembly with its two independent gouges in conjuction with the traveling steady restallows the perfect reperduction of even the smallest diameter pieces.In addition to the Hydraulic Sattle movement ensures the highest quality of finishing. Standard Equipment: Standard 3PH Power/Optional 1PH version avalible:Single Phase 220. Drive center with two interchangeable heads28 and 45 mm. Tail-Stock revolving ceneter12mm. Travelling Steady restmax dia.90mm(square ... more65 x 65 mm) with reduction bushing. Two virtical cobalt gougesredius 1.2mm and one pre cutting tool. Work piece centering device. Tool support for hand turning. Two Dust exstraction ducts.100mm. Motor Protection switch. Emergency push botton. Front Sliding guard. Service Tools. TECHNICAL DATA: Max Distance between centers 47.2' Height of centers over bed 4.7' Max Copy diameter 5.9'square)4.2' Max dia. permitted traveling steady 3.5'square)2.6' Connection for driving& tail-stock center 1.2' Saddle feed speed 0-16.5ft/min Saddle return speed 16.5ft/min Motor power of hydraulic unit 1hp Spindel Motor 4hp Installed Power 3.75kw Operating pressure 25/30 bar Overall dimensions 94.5'x25.6'x61' Gross weight(crate) 1012lbs Gross weight(case) 10100lbs Price $9447.00 Includes shipping for USA Orders SHOPPING CART, CART IS EMPTY,
Nice south bend 9c metal lathe with tons of tooling. 3 jaw. 4 jaw, 3 toolposts(lantern, boring, and shop made block) 2 drill chucks(2mt and 3 mt) live center mt2, dead center mt3, collet setup with 4 collets, toolholders, faceplate with lathe dogs, and anything else in that pic I have forgotten. The Hardinge mill and table are NOT included but are for sale as well. We can make a package deal on both if you are interested. Local pickup preferred or you can arrange freight but I currently have not weighed everything. I do charge $50 for crating materials if I have to crate it. Please do not wait until last minute to ask questions as I may not have time to answer them for you. You can call to discuss this lathe if and only if you are a serious buyer(not going to make a lowball offer) 757.869.2360. Posted with
Jacobs spindle nose lathe chuck model no. 91-A6 needs to be cleaned Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible. If you are buying more than one item please wait for an invoice before paying. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make other arrangements for payment. Please be aware that I ship as soon as payment is received. If ... moreyou change your mind about the item after it is shipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. I only add insurance to orders over $100 which is already included in the shipping cost. If your item is under $100 and you want to insure it at your cost please contact me before payment is made. Florida Residents I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. Please give at least 10 business days before expecting delivery. Please do not ask me to mark items with a lower value or mark as a gift. US and international government r
Up for auction are 4 kennametal lathe tool holders. I'm not much of a lathe guy but i think one is a left handed face tool. A cutoff tool, a groove or thread tool and another groove tool. The codes on the tools are as follows. 1. NGDHR-124B NC8 2.NA7 DDJNL-124B 3. TT 0545 4.NSR-123B NI8 ALL ARE IN PRETTY GOOD SHAPE AND LOOK LIGHTLY USED. COMES WITH WHAT IS SHOWN IN THE PICS. FEEL FREE TO ASK ANY QUESTIONS AND GOOD LUCK. Please ask any questions prior to bidding. And after making a purchase, email me with any concerns before leaving feedback, my goal is 5 star service. I aim to make my buyers happy! I am happy to exchange feedback once a transaction has been completed to everyone's satisfaction. FEEDBACK: We do not believe in negative feedback. So please contact us before leaving any if unsatisfied with the transaction, and we will ... moredo our best to resolve the problem in way in which each party will be satisfied. Fast Shipping! ITEMS WILL GENERALLY SHIP WITHIN 2 BUSINESS DAYS OF CLEARED PAYMENT AND NEVER MORE THAN 5 BUSINESS DAYS. Shipping to lower 48 United States only. No other International Shipping available! Payment: All items sold as is. PayPal Only Payment must be received within 3 days of auction closing THANK YOU FOR YOU BUSINESS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13ea37e35e7-0x100-
Original Atlas th54 metal lathe 2 step motor pully. 9-428. Comes with the key.
Original atlas th54 metal lathe 1/2 hp Atlas motor. There is a picture with all the specs for the motor. If you have any questions please feel free to email me Thanks for looking. Have a great day.
Used 1971 Monarch Model K-16 16" X 54" geared head metal lathe with D1-6 camlock spindle. Includes spindle guard. Light, chip pan, thread dial, micrometer stop, lantern toolpost with holders, dead center, wrenches, a 10" 3 jaw chuck with rev. jaws, and a 12" 4 jaw chuck. This lathe has spindle speeds 28-1200rpm and has a clutch making it easier to start with a phase converter. Threading is 1 12/ to 95 tpi. It has a little less than 1/4 turn backlash in the crossfeed and a little less than 1/4 turn in the compound. I believe it is powered by a 7.5hp 3 phase motor and is currently wired for 220volt with f-r starter. The ways have some wear but are good for the age of the machine, they are also flame hardened. The bore is 1 3/8" Call 314-750-1403 or email with questions. This machine can be picked up from my shop which ... moreis 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Email me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction to avoid neg feedback. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner.
You are bidding on a used 4-jaw. Independent chuck for a metal lathe with it's key. It will fit 3/4" threaded spindles. Measures 6" across, 1-1/2" deep. Please ask any questions.
GREAT EARLY LOT FEATURES THIS MINIATURE WORKING 1/12 SCALE MODEL KIT. THIS EXCELLENT METAL MODEL IS A DUPLICATE OF A FULL SIZE 1890`S ENGINE LATHE. UPON COMPLETION THIS LATHE MEASURES 3.5" INCHES LONG AND IS 4.5" INCHES TALL. THIS MODEL WILL REQUIRE SOME BASIC MACHINING SKILLS AND ASSEMBLY. IT HAS 19 EASY MACHINING ALUMINUM CASTINGS AND ALL REQUIRED HARDWARE. MATERIAL BAR STOCK. GEAR STOCK AND COMPLETE WORKING DRAWINGS ARE INCLUDED AS WELL. WHAT A MODEL KIT! THIS EXAMPLE HAS UNUSED AND COMPLETE CONTENTS IN A NICE CONDITION OVERALL BOX. THANKS FOR LOOKING. TO WINNING BIDDERS. IF YOU ARE SATISFIED AFTER MY SALE, PLEASE LEAVE A POSITIVE FEEDBACK AND A FIVE STAR RATING. AND IF NOT, PLEASE CONTACT ME SO THAT I CAN RESOLVE ANY PROBLEMS AND EARN YOUR FIVE STAR RATING. THANKS FOR LOOKING AND PLEASE DO NOT SEND ANY PAYMENT UNTIL I BILL YOU. ... moreI WILL BILL YOU ASAP THRU EBAY`S CHECKOUT. FOR SHIPPING, I LIKE TO USE UPS AS THEY HAVE THE BEST TRACKING SYSTEM. THEY COST A BIT MORE, BUT YOU CAN TRACK YOUR ITEM{S} FROM MY DOOR TO YOUR DOOR 24/7. OUTSIDE THE U.S. ORDERS ARE DONE AIRMAIL THRU USPS. SHIPPING COSTS SOMETIMES ARE MORE FOR REMOTE ZONES FAR AWAY FROM NEW HAMPSHIRE, LARGE SIZE ITEMS AND INSURANCE. SHIPPING AND HANDLING PRICES ARE LESS FOR VERY SMALL ITEMS AND LOW VALUE PAPER. I NO LONGER CHARGE A SMALL HANDLING FEE ABOVE THE ACTUAL SHIPPING COSTS. EVEN THOUGH IT COSTS ME MONEY FOR BIGGER BOXES, PACKING MATERIAL,TAPE, LABELS, MY SHIPPERS TIME TO PACK AND FINALLY GAS TO AND FROM EITHER UPS OR USPS. THAT`S MY UPDATED MORE BUYER FRIENDLY ATTEMPT TO RAISE MY DASHBOARD SCORES. FROM 20 YEARS OF SHIPPING, I CAN PRETTY MUCH TELL WHAT IT`S GOING TO COST FOR SHIPPING AND HANDLING ON AN ITEM OR ITEMS. JUST ASK. IF YOU ARE MAILING PAYMENT PLEASE INCLUDE A NOTE TO WHAT YOU WON WITH PAYMENT SO AS NOT TO DELAY YOUR ORDER. WE NOW ACCEPT PAYPAL. MAKE SURE YOU READ AND UNDERSTAND MY SHIPPING AND HANDLING PRICES BEFORE YOU BID. ANY QUESTIONS, PLEASE EMAIL ME BEFORE AUCTION ENDS. NO REFUNDS ON OVERSEAS ORDERS. PLEASE DON`T BID IF YOU
MT2 ENCO LIVE CENTER FOR AN ATLAS. CRAFTSMAN OR SOUTH BEND METAL LATHE. STAMPED ON UNIT READS"ENCO MFG CO 2 MT CHICAGO ILL 60639 MADE IN FRANCE" WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
Model C80 Doall automatic saw 12"x16" capacity Blade size 1"x144" has two extra new blades) Hyd blade tension Hyd vises 440v 3ph Delivery is possible within tx. Would be delivered on loboy trailer in picture. Buyer must unload. Weight is 4. 500 lbs approx. Buyer must be ready to unload at time of delivery. Email for delivery pricing. Posted with
1) 3-1/2" opening.1) 2-1/2" opening and(1) 1-3/8" opening.no international
UP FOR AUCTION PRECISION MACHINIST TOOLS& PARTS 3 PIECES– EXPANDING MADREL M1A– M2A– M0A SLEEVES IN METAL BOX IN ORIGINAL BOX* PLEASE REFER TO ALL PICTURES TO SEE CONDITION* Very well maintained and cared for by a seasoned professional machinist* PLEASE REFER TO ALL PICTURES TO SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE* Being SOLD AS IS– Do not know much about machinist tools but will try to describe as best I can. I am in the learning process. So any feedback will be appreciated. No RETURNS. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE ... moreAND WILL TRY TO WORK WITH YOU AS BEST I CAN. SERIOUS INQUIRIES ONLY. Please wait until auction has ended and invoice has been received to confirm all costs to buyer.
COMPOUND REST FOR A 6" ATLAS CRAFTSMAN LATHE IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ... moreME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY OTHER LISTINGS
Hello Folks. This is a 30 Tooth Gear with Collar. 30 Tooth x 2" outside diameter x 3/4" bore with keyway. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13ea8f6f15f-0x104-
Hello Folks. This is a 42 Tooth Gear x 1 5/8" Bore x 2 3/4" outside diameter x 1/2" thick. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*211fbc%3E-13ea8f6f161-0x101-
Vintage Magnetic Vee Block& Other Good solid magnetic Vee Block Heavy in nature and solidly made The magnet works works well In good condition The other tool im not quite sure what it is but its included www.retro-corner.co.uk Visit our website to see all our eBay items Pictures Below If you have any questions regarding this or any other of our other items then please contact us via email or on 07703017404 Item Photos, Items that are of a vintage or antique nature might be showing signs of general wear and tear Please study the pictures very carefully as this is the item and condition you will receive PLEASE NOTE: The vintage or antique items we sell are authentic and have been around for many years. They will show some signs of use or storage due to their age. Whilst we endeavour to appraise their condition and include as many visuals ... moreto the best of our ability, everyone has a different idea of condition. Please study our photographs and written portrayal, and if you’re unsure please feel free to email us any questions before committing to a purchase or bidding. Items damaged/lost in the post are at the responsibility of the purchaser to pursue a claim direct with the courier/post office. We will provide all necessary mailing documentation to the purchaser upon request. Shipping costs include all overheads of packaging materials etc including the postal fee of the item. International Bidders: In most cases where the item is of a small nature it will range from £10-£20 for standard delivery to Europe. For the rest of the world it ranges from £15-£30. This is for standard delivery. If you wish your item to be tracked then you will need to add an extra £8-£16 depending on your location in the world. If the item weighs over 2kg then please contact us for an exact quote as the item will have to be shipped via UPS or Fedex. All Fedex and UPS orders must have a telephone number. Please contact us before bidding to discuss the exact shipping costs. Once you bidding on the item you are a
Original thread indicator dial assembly for a 10" or 12" Atlas or Craftsman lathe. part number 9-63 CHECK MY OTHER AUCTIONS- I ALWAYS COMBINE SHIPPING WHEN POSSIBLE
Description: Here's a South Bend 9" Metal Lathe Reverse Tumbler Gear Bracket Assembly that includes the 16 tooth small gear in great shape as pictured. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and ... morea Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
good used lathe or shaper tool holder Armstrong USA T2-R shank is approx 5/8" x 1 1/2" x 7 1/2" 3/8" Mo-max Cobalt bit will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ 5" diameter 3 jaw hole is 1 1/2" x 8 tpi no key self centering for tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the ... morecorrect item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you! ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13ead13ba75-0xff-
This is a steady rest for a craftsman 101 or an atlas 618 part no. M6-326 It has an additional block in the setup that can be removed that adapted to a 9" southbend I believe. It was added by its previous owner. Still perfectly usable on any of the lathes above. Want something in the background ask about I am probably not attached to it. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13eab64057b-0x101-
3 jaw chuck with reversing jaws and backing plate(11/2-8) Posted with
Rivett plain lathe. 9" swing 18" between centers. Made in Feb. 1945. 230 VOLTS THREE PHASE. Runs good. Has a set of 5C collets, some tooling. We have it connected to power so you may see it run. Selling as is. No returns. Pick up only.
NICE MT2 TO MT3 SPINDLE ADAPTER FOR ATLAS CRAFTSMAN OR SOUTH BEND METAL LATHE. UNIT HAS SEEN SOME WORK TIME BUT IS FULLY FUNCTIONAL. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
Nice Atlas lathe wrench with a 3/8" square for the tool post. Carriage lock, compound and threading dial and an11/16" for the tail stock clamp.
Nice Atlas threading dial with bolt and new steel gear.
Good Atlas cross feed crank handle. Will come with proper nut.
Smooth operating jacobs super chuck no14n. These are the good ones. Posted with
good used lathe or shaper tool holder Williams USA T-2-S shank is approx 5/8" x 1 1/2" x 8" 3/8" HSS bit will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
Lathe parting blade holder with blade by j h Williams. Surface rust will come off with a brushing. I can take it off for winning buyer if they ask me to. Posted with
See pics actual item came off a 9" lathe but will most likely fit 6" as well and possibly 12" Posted with
See pics of actual item most likely fits 6& 9" lathes Posted with
dog driver threaded 1 1/2"8 for a south bend 9" lathe.2 dogs.1 straight and 1 clamp dog.no international
I believe this gear set is for an Atlas craftsman 6 inch metal lathe. Gear set is in good condition. the teeth count are: teeth count is 52.36,32. Gears have to slots/keys. hole diameter is.75
south bend 9" lathe micrometer stop.Part# MS102.nice condition,no international.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60%3F3%3Aa%3E-13eb25b8908-0xff-
For sale is a good used chuck backplate. It has 1-1/2"6 threads. The OD is 4.325" The 4 small holes may or may not line up with your chuck. So you will either need to drill the plate to match or the chuck to match. Could be used for a face plate on a wood or metal lathe. This has some rust and grease on it from years of use and storage, will clean up nice to your liking. It is old and used. Therefore sold with no returns.
For sale is a cutoff/parting tool. It is no name brand. It is used and in good shape. Has some peening where the screw in the tool holder clamps down but nothing major. Mounting shank is.560" x 1.4" It is old and used. Therefore sold with no returns.
Header Rockwell 14" Inch Metal Cutting Lathe Condition: Used. Machine has been tested Currently machine is not under power. But feel free to ask about options to inspect under power. PLEASE READ BEFORE BIDDING OR BUYING ITEM* Preliminary specifications are subject to verification and should be used as a guide only. The Equipment Hub. LLC cannot guarantee the accuracy of the specifications and/or description given of the condition of machine TERMS OF SALE Seller is selling the assets set forth on an“as is. Where is” basis and seller disclaims all warranties, representations and guarantees whether expressed or implied. Seller makes no representation or warranty as to the operability, merchantability or fitness for any particular purpose. The buyer is always responsible for verifying the condition and operational functions. Upon reasonable ... morenotice to The Equipment Hub the purchaser shall have the right to inspect the equipment prior to shipment. PAYMENT INFORMATION All Payments are to be made in United States dollars. We accept Visa. Master Card, Discover, Paypal, Bank Wire Transfers and Checks. Payment in full must be received prior to shipping. If payment is not received within 7 days of sale, we reserve the right to resell the item SHIPPING INFORMATION We ship our equipment worldwide. All items are shipped at the customer's expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00+. Item will be shipped 3-5 business days after payment has been secured. ADDITIONAL FEES Sales made to Georgia buyers will have a 7% sales tax added unless a valid tax resale number is provided. Purchased items that are not shipped or picked up within 14 days of sale date are subject to a monthly storage charge. RETURN POLICY Purchaser agrees that its acceptance of the machinery or equipment tendered shall constitute an acknowledgement by purchaser that such machinery or equipment satisfies any and all obligations by the Equipment Hub. Purchaser
Description: Note: The pictures show two wrenches but this auction is only for one wrench not two. Nicest wrench ships out first. Williams Metal Lathe Tool Post Holder Open End Wrench for a 1/2" nut in fine shape. Atlas Craftsman Logan South Bend. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. ... moreI almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
Grandpa's Secrets Discover a Wealth of How-to Projects& Plans from a Bygone Era. Explore our Scientific& Mechanical History in Vintage Hobby. Craft, Technical Magazines. grandpas_secrets Store for lots more great Items. Metal Lathe Turning Getting Started HowTo Guide w/pics How to Get Started in Metal Turning- gives metal lathe use basics. A good primer for the use of a lathe. Covers proper lathe set up and basic turning operations. Lots of illustrations and diagrams for help. Roughing out and facing the piece, Mounting regular and irregular work, Drilling. Milling, Thread Cutting, Using Faceplates. Chucks, Collets, Mandrels, Tool grinding. Knurling, Taper Turning, and more. This is a 13 page. 3 part, magazine article from 1967. We do not photocopy these. Article Includes Lots of photos and info of basic lathe operations, SHIPPING ... moreTERMS: Buyer to prepay and add- Multiple Wins may be grouped to save on shipping. $2.00 for USPS first class mail service or, $5.25 for priority mail service. Add $1.75 to total if you would like insurance with delivery confirmation. $3.00 for shipping to Canada. $5.00 other International shipping Payment: by Paypal. Visa and Mastercard accepted thru PayPal. Items shipped upon receipt of Paypal payment. CHECK OUT OUR OTHER AUCTIONS. Listing created with from Black Magik Software.
LOT OF 23 1/2" SQUARE MOST ARE MO-MAX COBALT. CAN USE FOR LATHE OR FLY CUTTER, HSS TOOL BITS, LOTS OF BLANK ENDS TO GRIND YOUR OWN SHAPE ON, SOME ARE NEW BLANKS OLD STOCK& SOME BITS HAVE STAINING FROM SITTING, ALL ARE IN GOOD WORKING ORDER, SOME ARE REGROUND. THERE ARE THREADING TIPS. RADIUS TIPS, OD& ID GROOVING TIPS FOR O-RINGS, TURNING TIPS CHECK MY OTHER ADS FOR MORE TOOLING. I DO HAVE MORE TO LIST LATER SALES& SHIPPING TO USA ONLY PAYMENT DUE IN 24 HRS& I WILL SHIP NEXT DAY. THANKS
Armstrong No. 10 Boring Bar Holder For Machinist On Larger Metal Lathe 5/8" Shank Holds 1" bar Fits South Bend Lathe
Armstrong No. 3-K-O Metal Lathe Knurling Tool for 9" or 10" Lathes South Bend 3 heads- Course. Medium and Fine diamond pattern knurls. Shank measures 1/4" X 13/16" x 3" long.
Up for auction is a very old S A Potter Metal lathe. It is in very good condition considering it is around 100 years old. There are to small nicks in the bed that are behind the chuck. And some light scratches but not bad at all. the bearings are snug and turns true, has a self centering 3 jaw chuck instaled doing away with the collets, although everthing is there to go back to collets, but I dont have any collets for it. The lathe( bed. Head stock, tail stock, tool holder, pulley system, and motor) were striped down to the metal and repainted gloss black, and burgundy( it had been painted several times over the years, but i tried to match it to what apeared to be the original color) The lathe also includes a pulley system( from what i can find on the internet. Apears to be original to the lathe) belts, spare headstock, spare tailstock, spare ... moretool holder, spare collet holder, vintage general electric motor that runs good. and drill chuck. The overall length of the bed is 32" About 3.5" from top of bed to center of chuck,and bed measures about 14" between front of chuck tail stock. I do not think you will find another one like this. Especially in this condition with all the accesories. I restored this lathe about 2 years ago, but have not used it since its restoration( almost feel its to nice to use) If you have any other questions please feel free to ask. I do have more pictures I can send you, but Ebay would only allow me to post 4. all sales are final with no returns. I would prefer to do local pickup. But will work with buyer to arange shipping at buyers expense( It would have to go with a freight carrier like R&L due to it size and weight, but should all fit on one pallet with no problem)
Pretty sure this was made by armstong as it is identical to another one I had by them. The surface rust will clean right off with a brush. Posted with
Royal live center with mt 2 mount. Posted with jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13eb7fb1be6-0xf4-
Jacobs 32b drill chuck originally came with a craftsman lathe as marked on the taper shank. Posted with
Original toolholders for a craftsman metal lathe Left and right hand. One bit included. Posted with
2 sets of good used lathe chuck jaws poland 1 set# 1339 and 1 set# 1473 will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
Offered is a 9-10" South Bend Feed screw support in good used condition.
VINTAGE METAL LATHE TAILSTOCK TURRET W/ NO. 2 MT SHANK MACHINIST. Seems to work fine, turns ok. I prefer to ship out by U S post office. You need to pay the total for the item& shipping, I will accept Pay-pal or U S postal $ ORDER then I will ship it out in a few days. If you need more pictures or have any questions send me a E-mail. Thank you! CHECK OUT MY OTHER LISTINGS*
Atlas or Craftsman original metal lathe 5" in 3 jaw chuck. UNICN MFG CO Working fine scrolls in and out OK. This came off a Craftsman 12" metal lathe. I prefer to ship out by U S post office. You need to pay the total for the item& shipping, I will accept Pay-pal or U S postal $ ORDER then I will ship it out in a few days. If you need more pictures or have any questions send me a E-mail. Thank you! CHECK OUT MY OTHER LISTINGS*
Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge I am not sure if this kit is complete. Please view pictures. Cat. No. 09116. I do buy and resale from Estate sales so I cannot guarantee these items come from Smoke free/ Pet free homes. I do not wash vintage items(with the exception of some clothing) as to not damage any finishes but try to send in as clean of condition as possible. Please view my other ebay id's at kimberly7099. Packrat mayhem and my husb ands ebay at rockabillyrumble69. We do combine shipping when possible. Please remind us if buying from different accounts. Payment due with-in 5 days of sale date. If you are havin g a problem. Please email me through ebay so we can work it out. If I have not heard from you and payment has not been ... moremade.I send a payment reminder on day 4. An ebay message on day 5 and I file a non-pay case on day 6. We Combine shipping when possible. The invoice will automatically combine shipping for you. With Buy-It-Now Items. Use the"add to cart button" to add the items to your cart one by one, when done shopping, go to your cart and click checkout and it will let you pay for all items at once with combined shipping. It will charge the highest shipping price for the first item and then add on average $1-$5 for each additional item depending on weight and box size. I describe items to the best of my ability. Noting any apparent flaws- I am not an expert on each item I list and may not be aware of all its functions, pieces it should come with, etc. SO PLEASE ASK QUESTIONS and any info you may know that you'd like to pass on is always welcome: Our feedback reflects many satisfied customers. Items Sold As Is- And In Used Condition Unless Noted Otherwise. International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to
Please note the Reasonable Shipping Cost. Clear photos and descriptions, Lightning fast processing and Delivery, and open communication, when leaving Detailed seller ratings. Thanks for your bids and your Business! Up for Auction are 4 used Carmet Carbide Turning Tool Bits! The Designations are: C 8 CA 610 Carmet. 1/3 C6 CA610, 3-1c-8 CA610, and AL8CA610 Carmet. S/H in the US will be $5.95 for this item and International Shipping will be $26.95! No Reserve, so Good Luck with your Bids! PLEASE CHECK OUT OUR NEW E-BAY STORE& ADD US TO YOUR FAVORITE SELLERS LIST! ALSO CHECK OUT OUR SISTER E-BAY SITE AND STORE UNDER"BIRTHDAYBUDDY1. Attention International Buyers: Import Duties. Taxes and Charges are not included in the item price or Shipping charges. These charges are the Buyers Responsibility. Please check with your country's customs ... moreoffice to determine what these additional costs will be prior to bidding/buying. We will not mark customs forms for less than the value of the item or mark them as gifts. US and International Regulations prohibit such Actions or Behaviors.
ATLAS Quality Clausing Corp. Kalamazoo MI METAL LATHE No. 10100 ~16" Work Bed 6" Swing ~Overall Length 34" 3 Speed Geared Selector Three(3) Jaw Chuck Feed Tables Tool Rest Heavy Steel WOW- Offered for sale is a ATLAS Quality No. 10100 METAL LATHE with 3 Jaw Chuck. Dead End(Tail Stock) Drill Chuck, 3 Geared Speed Selector, feed tables(cross slides) and tool rest/ post. Measures about 34" Long, the work area is about 16"Long with a 6" Swing. This fine metal lathe is well suited for small to medium projects. She looks lightly used, if used at all. Comes from a watch and clock maker's shop. I see no signs of damage other than a crack in the plastic pulley/ gear cover. The pulley belt is there but no motor. Though almost any decent 3/4 to 1 HP motor should work fine. No manual, though should be available on line, ... morebelt instructions on inside lid. The Atlas name plate is on the bed end and on gear housing. Weighting about 100 Lbs and I would prefer local pick-up. Can meet within 50 mile radius of Baltimore. But will ship via ODFL(Old Dominion) if buyer wants to pay the freight and boxing costs. Contact me in advance for shipping estimates. Please see the many pictures provided for more details. Thank you. Shipping based on actual postage and Insurance Priority Mail required on some international shipments for insurance purposes. I do not ship to some countries. My goal is your happiness. Powered by The free listing tool. List your items fast and easy and manage your active items.
Original Atlas Th54 metal lathe apron hand wheel gear assembly. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13ec0536638-0x106-
Original Atlas Th54 metal lathe saddle drive feed screw and handle assembly
Original Atlas Th54 metal lathe tail stock.
Original Atlas Th54 metal lathe apron split half nut and guid assembly.
JACOBS NO. 32 0-3/8" DRILL CHUCK SHANK ARBOR METAL LATHE TOOL MACHINEST. Chuck is in good used condition and comes with the key. Please email with questions. Thanks Posted with
Original atlas th54 metal lathe split nut scroll part 10d-38. 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13ec0536596-0xfd-
Estate sale purchase. Boston Brand cast iron change gear, good condition, some greasy, some very light surface rust, nothing that won't come right off, tooth numbers are pictured, the last one smallest with a shoulder I can't read but it is Boston as well. Any questions please ask. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ec05366d6-0x103-
I have for auction a used. But excellent conditioned, very strong running, Unimat-SL, Model DB200 Lathe. This is an estate find. Everything seems to be in extremely good working condition. Many knives included. Everything pictured. I hope the picture helps identify all the components correctly. Very fine, hard to find piece. Email any questions. Payment due within 7 days of auction's end. Flat rate shipping to lower 48 states. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13ec10afb09-0x102-
The following auction is for a South Bend 9" Metal Lathe Tailstock Wrench Tail Stock In good used condition with wear. Works fine. It is off a 9" South Bend 54" Bed Metal Lathe See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 4.50 for USPS 1st Class Mail Shipping with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions.
A used but still fully usable original Face Plate for the Craftsman/Atlas 6 inch metal lathe. measures approx 5-5/16 o.d. with what appears a 1" 8 thread for the spindle mount up. Buyer pays $5.50 shipping with the united states or 21.00 outside the U.S.A. I have other 6 inch Atlas lathe stuff on ebay and I will combine shipping to save you $(approx 50% off the shipping cost on each additional item. Thank you.
A used but still fully usable Threading Dial for the Craftsman/Atlas 6 inch metal lathe. Buyer pays $5.50 shipping with the united states or 21.00 outside the U.S.A. I have other 6 inch Atlas lathe stuff on ebay and I will combine shipping to save you $(approx 50% off the shipping cost on each additional item. Thank you.
A used but still usable drill chuck for the Craftsman/Atlas 6 inch metal lathe. Could be used in larger lathes with the proper adapter. Holds from approx 1/16 up to 1/2 drills. Taps, reamers etc. The morse taper end(the end that goes in tailstock) tapers from 3/8 up to 1/2 inch. Buyer pays $5.50 shipping with the united states or 21.00 outside the U.S.A. I have other lathe stuff on ebay and I will combine shipping to save you $(approx 50% off the shipping cost on each additional item. Thank you.
A used but still usable live center for the Craftsman/Atlas 6 inch metal lathe. Could be used in larger lathes with the proper adapter. 4 inches overall length. morse taper end(the end that goes in tailstock) tapers from 3/8 up to 1/2 inch. The cone that fits in your work piece tapers from 5/8 inch down to 1/32 inch. Buyer pays $5.50 shipping with the united states or 21.00 outside the U.S.A. I have other lathe stuff on ebay and I will combine shipping to save you $(approx 50% off the shipping cost on each additional item. Thank you. 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13ec1691636-0xf3-
Welcome to my site! Comes exactly as shown. With what is shown. The last photos show where fits on the machine. Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Item is in good condition. It wears old grey paint. Which is wearing in some areas(please see photos) If you have any questions. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase Price will be promptly refunded after I receive the item in the same condition it was sent in. Item will be packaged with care and will ship quickly. I always ship out items within 2 business days after payment is received. I take my shipping and packaging seriously! Please see ratings. I am proud of my feedback and want ... morebuyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking!
Albrecht drill chuck with a mt1 arbor. I am including a mt1 to mt2 adapter for those that have a mt1 tailstock and mt2 headstock. Smooth operating keyless drill chuck. Posted with
Welcome to my site! Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Great condition. Ready for use COMBINED SHIPPING IS AVAILABLE WHENEVER POSSIBLE! My goal is to get items out safely. But also as cheap and as quick as possible. I have a great shipping record and take my shipping seriously! If you have any questions. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase Price will be promptly refunded after I receive the item in the same condition it was sent in. Item will be packaged with care and will ship quickly. I always ship out items within 2 business days after payment is received. I take my shipping and packaging seriously! Please see ratings. I am ... moreproud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking! o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13ec1864747-0xf8-
Welcome to my site! 10" 10K South Bend Metal Lathe NICE! Straight as an arrow! Near perfect threading! Comes exactly as shown. With what is shown. Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Item is in great condition. Straight as an arrow. No bends anywhere. I checked the threading very carefully and did not see a single nick/ding. Looks great! There are rust stains. Which could easily be cleaned. Lead screw is about 49 1/2" long COMBINED SHIPPING IS AVAILABLE WHENEVER POSSIBLE! If you have any questions or I can be of any help. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase Price will be promptly refunded after I receive the item in the ... moresame condition it was sent in. Item will be packaged with care and will ship quickly. I always ship out items within 2 business days after payment is received. I take my shipping and packaging seriously! Please see ratings. I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking! 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13ec1864790-0x109-
Nice- Original South Bend take up nut. Screw and washer for a 9" or 10K South Bend lathe headstock spindle. In fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Excellent- Original bull gear plunger and spring for the bull gear of a Logan 10" Model 200 lathe. Excellent condition. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Nice- Original Logan 9" Model 400 compound rest base gib and set screws. Gib is 5 1/4" long. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.