In 
 
Order by: 
Available to: 
Price: 
 - 
$
29.95
Buy It Now
Free Shipping
Condition: Used
Location: Wildomar,CA,USA
Good condition Please review photos and email any questions AC
$
750
Buy It Now
Free Shipping
Condition: Used
Location: Lenapah,OK,USA
$
350
Buy It Now
$0 Shipping
Condition: Used
Location: La Habra,CA,USA
FREE SHIPPING IN US! South Bend Lathe 13" Follower Rest Jaws/ Fingers with Bearings New Follower Rest Jaws/ Fingers with Roller Bearings for South ... moreBend 13" Lathes. Take those oily& messy cast iron fingers out and replace them with these smooth running roller bearings! Listing is for a quantity of[2] Fingers- they are 1/2" x 1" and 3" long with 1/2" diameter shielded bearings. Follow Rest not included. Replaces part PT128T1. Designed for full range of motion. Check out my other listings for more Atlas. Craftsman and South Bend Lathe parts! I leave Feedback at time of shipping to notify buyer of shipment. No feedback ransoming here! Questions? email me! Thanks for looking. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Posted with
$
1,379.99
Buy It Now
$0 Shipping
Condition: New
Location: Anaheim,CA,USA
$
199.99
Buy It Now
$0 Shipping
Condition: Used
Location: Temecula,CA,USA
$
450
Buy It Now
$0 Shipping
Condition: Used
Location: Oldsmar,FL,USA
$
12,000
Buy It Now
$0 Shipping
Condition: Used
Location: Statesville,NC,USA
$
28
Buy It Now
$3.5 Shipping
Condition: New
Location: Ionia,IA,USA
$
22,279
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
CPO Model 321469. List Price: $21.819.99, CPO Price: $18.699, You save: $3.120.99(14% Availability: In Stock, Uniquely designed by JET, ISO9001 certified ... moremanufacturer, 3-1/8-in bore spindle is supported by two tapered and one ball bearing, Chrome molybdenum headstock gears are hardened. Ground and shaved, Universal gearbox allows inch. Metric, diametral and module pitch threads, no change gears required, Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces, T-slotted compound slide featuring a four-way tool post, One piece cast iron base absorbs vibration allowing heavier cuts, High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground, Removable gap allows up to 23-5/8-in diameter work, Number of Metric Threads, 24, Follow Rest Capacity, 3/8-in- 7-in, Number of Longitudinal and Cross Feeds, 122, Compound Slide Travel, 5-1/8-in, Maximum Tool Size, 1-in X 1-in, Cross Slide Travel, 9-in, Number of Inch Threads, 61, Length of Gap, 12-1/4-in, Spindle Mount, D1-8, Number of Spindle speeds, 12, Weight, 5700 lbs. Pre-Wired, 230V, Swing Over Bed, 14-in, Steady Rest Capacity, 1/2-in- 3-1/2-in, Spindle Taper w/ Sleeve, MT-7(MT-5) Spindle Bore, 3-1/8-in, Range of Spindle Speeds, 42- 1800 RPM, Motor, 7-1/2 HP. 3-Ph, 230/460V, Range of Metric Threads, 05- 20 mm, Swing Over Cross Slide, 7-5/8-in, Range of Cross Feeds, 0006- 0365 in.rev. Carriage Travel, 35-in, Distance Between Centers, 40-in, Range of Inch Threads, 1-5/8- 72 TPI, Range of Longitudinal Feeds, 0015- 0913 in.rev. Lathe w/ 2-Axis ACU-RITE DRO 200S Installed- 321469, 2-Year, For full warranty information. Please contact us at 800-714-0969* Warranty valid for US customers only, Orders outside the US are not protected by manufacturer warranty. All orders are still covered by CPO's 30-day Money Back Guarantee) Shipping and customs charges for non-US orders will be calculated when the item is added to cart, All corded products are designed to work with North American 110/120V outlets only.
$
325
Buy It Now
$18 Shipping
Condition: Used
Location: Olmsted Falls,OH,USA
$
100
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown,VA,USA
$
44,900
Buy It Now
Free Shipping
Condition: Used
Location: Chatsworth,CA,USA
$
612.69
Buy It Now
$0 Shipping
Condition: New
Location: Anaheim,CA,USA
$
269.99
Buy It Now
$0 Shipping
Condition: Used
Location: Waterford,MI,USA
$
109
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
225
Buy It Now
$20 Shipping
Condition: Used
Location: Mahwah,NJ,USA
$
139.99
Buy It Now
$49.99 Shipping
Condition: Used
Location: Westland,MI,USA
$
129.99
Buy It Now
$0 Shipping
Condition: New
Location: Banning,CA,USA
$
400
Buy It Now
Free Shipping
Condition: Used
Location: El Paso,TX,USA
$
671.16
Buy It Now
$0 Shipping
Condition: New
Location: City of Industry,CA,USA
$
25,799
Buy It Now
$0 Shipping
Condition: New
Location: La Vergne,TN,USA
Untitled Document Product Name: JET 321980 GH-2280ZX 3-1/8-Inch Spindle Bore geared Head Lathe Includes: 1) JET Gh-2280Zx Large Spindle Bore Lathe Description: ... moreFeatures 16. 18" AND 22" ZX SERIES LARGE SPINDLE BORE LATHES" Uniquely designed exclusively by JET ISO 9001 certified manufacturer 3-1/8 bore spindle is supported by two tapered and one ball bearing" Chrome molybdenum headstock gears are hardened. Ground, and shaved Universal gearbox allows inch. Metric, diametral, and module pitch threads, no change gears required Carriage Feature one-shot lubrication and Turcite B on bed sliding surfaces T-slotted compound slide featuring a four-way tool post One-piece cast iron base absorbs vibration allowing heavier cuts High quality ANSI Class 50 wear-resistant cast iron bed ways are hardened and ground Removable gap allows up to 23-5/8 diameter work on 16" 27-1/2" on 18" Five position automatic carriage stop increases productivity Attractive chrome control levers. Dials, and knobs complete this impressive package Tolerance test certificate included 10 3-jaw scroll chuck with top reversing jaws Specifications Weight(Lbs. 6933 Motor(HP) 10 HP. 230/460, 3 Ph Prewired(V. 230 Drive: Geared Head Overall Dimensions(L x W x H) In. 136 x 45 x 71 Style(Type) Engine- Large Spindle Bore Carriage Travel(In. 74-5/16 Size: 22 x 80 Follow Rest Capacity(In. 1/2- 3-1/2 Range of Spindle Speeds(RPM) 25- 1.800 Spindle Mount: D1-8 Max Tool Size(In. 1 x 1 Length of Gap(In. 12 Swing Through Gap(In. 29-1/2 Distance Between Centers(In. 80 Width of Bed(In. 13-1/8 Spindle Taper with Sleeve: MT-7(MT-5) Compound Slide Travel(In. 39569 Steady Rest Capacity(In. 3/8- 7-3/4 Other Specifications Include: Spindle Bore(In. 39508 | Range of Cross Feeds(IPR) 0006- 0365 | Cross Slide Travel(In. 12 | Range of Longitudinal Feeds(IPR) 0015- 0913 | Range of Metric Threads: 05- 20 | Number of Spindle Speeds: 12 | Numb United States: FREE LTL Shipping* In the contiguous 48 states(6-18 Day no
$
21,250
Buy It Now
$0 Shipping
Condition: Used
Location: Meadville,PA,USA
$
329.99
Buy It Now
$14 Shipping
Condition: New
Location: Niles,MI,USA
$
175
Buy It Now
Free Shipping
Condition: Used
Location: Hyattsville,MD,USA
$
19.99
Buy It Now
$9.99 Shipping
Condition: Used
Location: Grand Blanc,MI,USA
Tool Holder or Metal Lathe bit centering tool*FREE SHIPPING* Quantity of 2 USA Made Takes The Guess Work Out of Aligning The Tool Tip to Center of Stock ... moreSee Photo Photograph shows Actual item for sale Everything we sell is in our warehouse Questions Call: 260-723-4946
$
325
Buy It Now
$35 Shipping
Condition: Used
Location: Mahwah,NJ,USA
$
6.89
Buy It Now
$4 Shipping
Condition: Used
Location: Diamond Point,NY,USA
Grandpa's Secrets Discover a Wealth of How-to Projects& Plans from a Bygone Era. Explore our Scientific& Mechanical History in Vintage Hobby. ... moreCraft, Technical Magazines. grandpas_secrets Store for lots more great Items. 1947 South Bend Machine Tool Catalog magazine section A South Bend Machine Tool catalog magazine section. Featuring their full line of Metal Lathes and attachments. This is an original 16 page section from a 1947 magazine. The pages measure 6 1/2" x 9" SHIPPING TERMS: Buyer to prepay and add- Multiple Wins may be grouped to save on shipping. $2.00 for USPS first class mail service or, $5.25 for priority mail service. Add $1.75 to total if you would like insurance with delivery confirmation. $3.00 for shipping to Canada. $5.00 other International shipping Payment: by Paypal. Visa and Mastercard accepted thru PayPal. Items shipped upon receipt of Paypal payment. CHECK OUT OUR OTHER AUCTIONS. Listing created with from Black Magik Software.
$
100
Buy It Now
Free Shipping
Condition: Used
Location: Bay Village,OH,USA
$
149.95
Buy It Now
$0 Shipping
Condition: Used
Location: Slatington,PA,USA
$
1,327.99
Buy It Now
$0 Shipping
Condition: New
Location: Anaheim,CA,USA
$
1,379.99
Buy It Now
$0 Shipping
Condition: New
Location: Anaheim,CA,USA
$
149.99
Buy It Now
$0 Shipping
Condition: Used
Location: Madison Heights,VA,USA
$
611.89
Buy It Now
$0 Shipping
Condition: New
Location: Anaheim,CA,USA
$
550
Buy It Now
$65 Shipping
Condition: Used
Location: Oregon,OH,USA
$
39.95
Buy It Now
$4.5 Shipping
Condition: New
Location: Cross Plains,TN,USA
$
300
Buy It Now
$25 Shipping
Condition: New – Open box
Location: Mahwah,NJ,USA
$
356.18
Buy It Now
$0 Shipping
Condition: New
Location: China
$
110
Buy It Now
$20 Shipping
Condition: Used
Location: Baldwin Park,CA,USA
Atlas Craftsman 12" Metal Lathe Tailstock Assembly L4-5 in excellent working condition and you get what you see in the pictures. This will be shipped ... moreUSPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but wait for updated invoice before you pay.
$
8,499
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
CPO Model 321130. List Price: $7.899, CPO Price: $6.659, You save: $1.240(16% Availability: In Stock, Enclosed gearbox design provides smooth. Quiet operation, ... moreFast. Easy speed changes, Low voltage motor controls, Helical cut headstock gears reduce noise, Change gears allow metric threading, Spindle is supported by precision tapered roller bearings, V-way bed is induction hardened and ground, Gap bed section provided for large diameter work, Independent leadscrew and feed rod, T-slotted compound slide with four-way tool post, Carriage mounted spindle control lever, Automatic feeding and threading are fully interlocked, Feed selectors travel in grooved ways, Overall Dimensions, 45-in x 32-in x 71-in(H x W x L) Follow Rest Capacity, 2-3/4-in, Compound Slide Travel, 2-11/16-in, Maximum Tool Size, 5/8-in x 5/8-in, Number of Inch Threads, 40, Cross Slide Travel, 6-5/16-in, Number of Longitudinal and Cross Feeds, 40, Spindle Mount, D1-4, Weight, 975 lbs. Pre-Wired, 230V, Swing Over Bed, 13-in, Steady Rest Capacity, 2-5/8-in, Swing Through Gap, 18-3/4-in, Spindle Bore, 1-3/8-in, Range of Spindle Speeds, 60- 1.240 RPM, Motor, 2 HP. 1 Ph 230V, Width of Bed, 7-3/8-in, Swing Over Cross Slide, 7-25/32-in, Range of Cross Feeds, 0.0012- 0.0345 in/rev. Carriage Travel, 35-in, Range of Inch Threads, 4- 112 TPI, Taper in Tailstock Spindle, MT-3, Spindle Taper with Sleeve, MT-5(MT-3) Tailstock Spindle Travel, 3-3/4-in, Number of Spindle Speeds, 12, Range of Longitudinal Feeds, 0.0036- 0.0325 in/rev. BDB-1340A Lathe with NEWALL DP700 DRO Installed- 321130, Oil Pan, 6-in 3-Jaw Direct Mount Chuck with Top Reversing Jaws, 8-in 4-Jaw Chuck, 12-in Faceplate, 4-Way Tool Post, Steady and Follow Rest, Metric Change Gear, Splash Guard, Centers with Headstock Center Sleeve, Threading Dial, Tool Box and Tools, 2-Year, For full warranty information. Please contact us at 800-714-0969* Warranty valid for US customers only, Orders outside the US are not protected by manufacturer warranty. All orders are still covered by CPO'
$
300
Buy It Now
$0 Shipping
Condition: Used
Location: Millstadt,IL,USA
$
32,000
Buy It Now
$0 Shipping
Condition: Used
Location: Colona,IL,USA
$
14,999
Buy It Now
$0 Shipping
Condition: New
Location: Suwanee,GA,USA
$
609.69
Buy It Now
$0 Shipping
Condition: New
Location: Anaheim,CA,USA
$
400
Buy It Now
Free Shipping
Condition: Used
Location: Tinley Park,IL,USA
Overall base dimensions are 11 3/4" long x 5 3/4" wide with a 2 3/4" wide Adj slot. the slide is 3 1/2" wide x 6 long with a 3 3/4" ... moreleadscrew travel.This weighs about 40 pounds unpacked. I checked and with the compound out( two set screws) this fits my 9" south bend Posted with
$
15,500
Buy It Now
Free Shipping
Condition: Used
Location: Toledo,OH,USA
$
19.99
Buy It Now
$8.95 Shipping
Condition: Used
Location: Elmwood Park,IL,USA
$
500
Buy It Now
$35 Shipping
Condition: New
Location: Mahwah,NJ,USA
$
24,500
Buy It Now
$0 Shipping
Condition: Used
Location: Alto,MI,USA
$
21,499
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
$
1,400
Buy It Now
Free Shipping
Condition: Used
Location: Lenapah,OK,USA
$
119
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
350
Buy It Now
$0 Shipping
Condition: Used
Location: Whitehall,PA,USA
$
800
Buy It Now
Free Shipping
Condition: Used
Location: Lenapah,OK,USA
$
270
Buy It Now
Free Shipping
Condition: Used
Location: Chicago,IL,USA
$
180
Buy It Now
$0 Shipping
Condition: Used
Location: Ellenville,NY,USA
$
250
Buy It Now
$65 Shipping
Condition: Used
Location: Pomona,CA,USA
$
76
Buy It Now
$0 Shipping
Condition: Used
Location: Ellenville,NY,USA
$
200
Buy It Now
Free Shipping
Condition: Used
Location: Nashville,TN,USA
$
22,559
Buy It Now
$0 Shipping
Condition: New
Location: La Vergne,TN,USA
$
613.99
Buy It Now
$0 Shipping
Condition: New
Location: Anaheim,CA,USA
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
 In 

Past Items  
 
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 I don't know what this fits but will try to answer any questions.
Original Atlas th36 metal lathe carriage chip guard plate 9-37A 10" F series.
1917 ad lg kno burn metal lathe Search this listing is for an ad taken from a magazine dated 1917 ad measures 8x6 excellent condition see scan original ad all ads are original ads may not be dated as many magazines did not date all pages the date stated in the listing is the date taken from the cover of the magazine the ad was taken from if the ad is not a full page ad only the ad purchased will be sent On Jan-08-12 at 23:40:02 PST. Seller added the following information: BUYERS PLEASE NOTE: IF THIS LISTING IS FOR AN ADVERTISEMENT? YOU WILL RECEIVE A PAPER ADVERTISEMENT AS SHOWN IN THE SCAN NOT THE ITEM BEING ADVERTISED IF THIS LISTING IS FOR A PHOTO/IMAGE? YOU WILL RECEIVE AN IMAGE TAKEN FROM A MAGAZINE NOT A 3X5 SNAPSHOT
This metal lathe index pin came with the atlas metal lathe i bought. It was in a box with extra parts. So i dont know if it belongs with this lathe. If you have any questions please email me and i will try to answer them. I do combine shipping if possible. Thanks for looking.
Welcome to my site! Up for sale is an Original Forward Reverse Gear Tumbler Bracket Assembly off a 9" South Bend Metal Lathe Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Item is in great condition. No broken. Chipped, or worn teeth. All gears spin with ease. There are scratches here and there, but nothing that will affect performance(please see photos) Cleaned up and ready for use. COMBINED SHIPPING IS AVAILABLE WHENEVER POSSIBLE! My goal is NOT to make money on shipping. But rather, to offer buyers the cheapest. Saf est. And quickest shipping possible. If you have any questions or I can be of any help. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase ... morePrice will be promptly refunded after I receive the item in the same condition it was sent in. Item will be packaged with care and will ship quickly. I always ship out items within 1 business days after payment is received. I take my shipping and packaging seriously! Please see ratings. I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking!
Original Atlas th36 metal lathe headstock drive gear#32. 10" F series.
Original Atlas th36 metal lathe head stock gear guard cover 10-18 10" F series.
Original Atlas th36 metal lathe pully and bushing# 10-79 10" F series. The smaller back comes with it to
Original Atlas th36 metal lathe on. Off switch and plate 41-36. 10" F series. There are two screws not shown that come with it to. I will combine shipping if possible. Note. The switch was not hooked up when i baught the lathe It was hooked to a forward reverse switch. so the switch may not work. This is a as is on the switch.
Atlas TH36 metal lathe back gear 10-241. I dont think this is the original one that came with this lathe. It is in great condition. i do combine shipping when possible.
Original Atlas th36 metal lathe timken bearings headstock spindle assembly.You can look at the pictures and judge the condition. I do combine shipping if possible. Email me with any questions and i will try to answer your question. Thank 1/2" X 8TPI ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13fc5c4be3d-0xf6-
This listing is for a Craftsman Lathe Atlas craftsman 6" Metal Lathe Model 618- 101 CHANGE GEAR BUSHING SLEEVE AND BOLT Craftsman 6" Model 101.21400 Click on"Lathe" in my store for more parts. NO CRACKS OR WELDS. Wait for invoice before paying. If you want combined shipping. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. I leave feedback as soon as the buyer does! You'll need to do your own research on your specific application. keep us in your favorite seller file and watch frequently for parts as they come up. If you have any requests. We can check it out for you. So, watch for these items coming in the near ... morefuture. We will combine shipping for multiple auctions won. Message me with any questions. THAT IS THE BEST WAY TO GET A HOLD OF ME. Good Luck and Happy Bidding! SELLERS TERMS AND PROCEDURES We will e-mail winners within 24 hours of the winning bid and an invoice. Upon payment. We will then ship the item(s) within 3 business days. We would also ask that you e-mail us after you receive your shipment to let us know that it was received satisfactorily and them please leave us feedback and we will do the same for you. Buyer pays all shipping costs. PayPal via checking account or paypal account.
DESCRIPTION: USED. CO LLET SPEED CHUCK. I THINK IT USES 2J COLLE TS. THE MOUNT IS L1(6" DIAMETER; 6TP I; 5/8 KEY) CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN ... moreTHE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND
Various double ended bits from an estate. Some look as though they have not been used. Many sizes are unclear. I am happy to answer any questions about the tools. Please view my other items for several other items from the estate. I am happy to combine shipping. Most lots and items start at $5.
This was with some other metal lathe parts was in a Atlas ht-42 headstock that was parted out with the gears.Im not a lathe person but a friend of mine is and got the info for me,not much more I know on this but will try if ask any questions only sold in upper united states sorry ps both front and rear bearings are there,rear bearing was tight every thing is original as I know?265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13fc8afa1a3-0xef-
Has been in use in gunsmith shops since it was purchased new. Has contour travel guide for barrel tapering. The machine runs great. I have just purchased a new machine and have no use for it anymore. I can also package the item for shipping if needed. Please feel free to contact for any questions(903)399-6116 or murrysguns@yahoo.com. Specifications: STOCK NUMBER- 321337. TOOL POST TYPE- 4WAY. SWING OVER BED- 12" SWING OVER SADDLE- 5 1/2" SWING OVER CROSS SLIDE- 6" DISTANCE BWN CENTERS- 36" SPINDLE NOSE MOUNTING- 0 60M-8 TPI. MAIN SPINDLE BORE- 1 3/8" TAPER OF SPINDLE BORE- MT#5. TAPER OF CENTER- MT#3. OF SPINDLE SPEEDS- 12. RANGE OF SPINDLE SPEEDS- 60-1240(RPM) CARRIAGE TRAVEL- 31 1/4" CROSS SLIDE TRAVEL- 5-7/16" COMPOUND REST TRAVEL- 2-11/16" MAX SIZE CUTTING TOOLS- 1/2"x1/2" DIAMETER OF ... moreTAILSTOCK SPINDLE- 1 1/4" TRAVEL WITH CENTER- 3 7/8" TAPER OF TAILSTOCK CENTER- MT#2. BED WIDTH- 7 3/8" BED LENGTH- 60 3/8" BED HEIGHT TO TOP OF V- 11-13/16" LEADSCREW(THREAD) 3/4" DIA. x 8 TPI(ACME THREAD) FEED SHAFT DIA. 5/8" INCH THREAD CUTTING. RANGE A-E. 1-8. 4-112 TPI(40 KINDS) METRIC THREAD CUTTING RANGE- 0.25-6(34 KINDS) RANGE OF LONGITUDINAL FEED- 1005" TO.0036" IN.REV. RANGE OF CROSS FEED- 0345" TO.0012" IN.REV. NUMBER OF FEED RANGES- 40x40(LONG. CROSS) MAIN DRIVE MOTOR- 2HP.SGL, PH.115/230V(PRE-WIRED 115V) CAPACITOR START. OVERALL DIMENSIONS- 27 1/2"W. 21 1/2"H, 69"L. NET WEIGHT(APPROX) 600lbs. SHIP WEIGHT(APPROX) 790lbs.
Lot Morse Taper MT Drill Bits# No 3 Set Metal Lathe Press Cle Forge Latrobe + Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Lot of 8 Morse Taper MT#3 Drill Bits Removed from a tech school- have seen little or no use. Includes Cle Forge. Chicago Latrobe, National& KSD We also have a lot of#2 Morse Tapers available. Should you have questions. We can be reached at 563-387-7705. PayPal Etc UPS Ground Fully Insured in the USA. Shipping rates apply to the lower 48 states. We are more than happy to ship world-wide. Please check for shipping costs. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
Lot Morse Taper MT Drill Bits# No 2 Set Metal Lathe Press Chicago Latrobe KSD + Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Lot of Morse Taper MT#2 Drill Bits Removed from a tech school- have seen little or no use. Includes Cle Forge. Chicago Latrobe, National, KSD, HSS, LSI-USA, National& Others. Did not see any China or Taiwan junk. We also have a lot of#3 Morse Tapers available. Should you have questions. We can be reached at 563-387-7705. PayPal Etc UPS Ground Fully Insured in the USA. Shipping rates apply to the lower 48 states. We are more than happy to ship world-wide. Please check for shipping costs. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
LOT OF 9 DACO METAL LATHE CHUCK JAWS MACHINIST LOOK WOW THIS IS A LOT OF 9 DACO CHUCK JAWS. IT LOOKS LIKE THERE ARE 3 TO A SET. THEY APPEAR TO BE IN GOOD USED CONDITION. GREAT FOR THE USER. THANKS FOR VIEWING! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13fca3a1ce1-0xfa-
16 P ages in really good condition ALL ITEMS ARE DESCRIBED TO THE BEST OF MY KNOWLEDGE. What You See Is What You Get I do the best I can with the photography to show you the product as accurately as possible. Please Ask Any And All Questions You May Have Before Bidding or Buying And I Will Do My Best To Answer Promptly. Check my other auctions. I do combine shipping Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
CREDIT CARD PAYMENT OVER THE PHONE OR PAYMENT IN PERSON AT TIME OF PICK UP ARE THE ONLY FORMS OF PAYMENT ACCEPTED ON THIS ITEM. THAT IS OUR POLICY ON ITEMS OVER $500 Selling a Monarch 12 ckk gear head metal lathe. Tag states 14.5" actual swing and 30" center to center. Outfitted with a coolant pump. Includes a 3 jaw chuck. A rockerfoot tool post, and several cutters both carbide and high speed steel. Machine is in good condition. WE HAVE A FORKLIFT HERE TO LOAD IT ONTO A TRUCK OR TAILER. MACHINE WEIGHS APPROXIMATELY 3500 LBS FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. PLEASE EMAIL OR CALL US FOR A SHIPPING QUOTE. SHIPPING TO A COMMERCIAL LOCATION IN THE CONTINENTAL US SHOULD BE BETWEEN 250-400 DOLLARS. BUT YOU MUST CONTACT US FOR AN EXACT PRICE. LOCAL PICK UP IS MORE ... moreTHAN WELCOME, BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. CREDIT CARD IS THE ONLY METHOD OF PAYMENT. WE CAN TAKE A CREDIT CARD OVER THE PHONE. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
KILLER VINTAGE INDUSTRIAL METAL LATHE MACHINE LEGS TABLE BASE Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge CLEANING OUT MY SHOP THIS WEEK AND RAN ACROSS THESE LEGS I BOUGHT FROM A FRIEND A FEW MONTH BACK. FEEL FREE TO MAKE A OFFER. MEASURMENTS LATER TONIGHT. FEEL FREE TO MAKE A OFFER. measures 22 inches tall and 23 wide at base. We are a family owned and operated business since 1970 and have about 40.000 square feet of antiques and home furnishings between our store and our warehouses. We import from 5 countries store number 206.623.2740 www.antiqueliquidators.com WE DO HAVE AFFORDABLE LOCAL DELIVERY. WE ALSO HAVE AFFORDABLE SHIPPING TO OREGON AND CALIFORNIA ALONG WITH ALL OVER THE USA. Winning bidders are also welcome to pick up their items. Please arrange by phone or email when you were thinking of ... morepicking up the item. Your item could be at our warehouse location in South Park or our retail location at 503 Westlake Avenue North in downtown Seattle. Please do not bid if you don't intend to follow through with the terms of the transaction. Please email any questions prior to bidding. At Antique Liquidators we strive for YOUR satisfaction! Check our feedback from all of our of satisfied customers and BID WITH CONFIDENCE! Thanks as always for your interest! WE ACCEPT Paypal WASHINGTON STATE RESIDENTS PAY SALES TAX. SHIPPING: A SHIPPING ESTIMATE IS GIVEN IN THE DESCRIPTION FOR THIS ITEM. FOR A MORE ACCURATE QUOTE PLEASE EMAIL YOUR ZIP CODE. BUYERS ARE ALSO WELCOME TO PICK UP IN PERSON AT OUR RETAIL LOCATION AT 503 WESTLAKE AVENUE NORTH IN DOWNTOWN SEATTLE. MOST FURNITURE DELIVERIES ARE TO YOUR HOMES CURB. FOR A ADDITIONAL FEE IT CAN BE BROUGHT INTO YOUR HOME. ALL SMALL ITEMS ARE SHIPPED BY USPS. UPS, OR GREYHOUND TERMINAL TO TERMINAL. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
I bought this lathe new and have hardly used it. As can be seen on the photos 400 Watts 120 Volts 60 HZ Variable speed 0-2500 RPM Chuck diameter: 3.15" Top slide travel: 1.38" Cross slide travel: 2.56" Compound Slide Travel: 2" effective) Maximum Length of Workpiece: 12" Swing over bed: 7" Screw threads: 12-52 Threads Per Inch. 0.4- 2.0mm, Spindle Taper: Morse No. 3, Tailstock Taper:Morse No. 2, Instruction Manual Spindle Bore: 0.75" 3 External jaws 3 Internal jaws
CIRCLE HOLE CUTTER FOR METAL WITH 2 BITS 1/2" SHANK IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU ... morePURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
CENTRAL MACHINERY" 7X10 BED WAY for Metal Mini Lathe. This Unit was just Clean and Refurbish. Including the re polishing of the way and repainting of unit with Harbor Freight red spray paint. Very close or identical to original color. 14 D ays Return/Money B ack or Exchange. 1 day handling. We Offer 1 Day Shipping! Shipping Weight about 28 Lbs.approx. including wood crate. The Shipping Price of $ 48.00 is from California to Florida. Others should be Less. Wood crating $ 7.50 my cost to be added to shipping. Local Pick Up available. California Residents Must Pay 8% State Sale Tax as Required by Law. Please feel free to ask any question if you don't see your answer in the pictures. GOOD LUCK AND HAPPY BIDDING! On Apr-18-13 at 02:00:26 PDT. Seller added the following information: 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13fd173fa03-0x101-
Made in the USA by Buck. Number on the face I believe is the part number is 3662. Pat. no. is 2639157. I disassembled it and ran it through the ultrasonic cleaner, it shows no corrosion inside and light patina on the outside. The ring gear is perfect with no chipped or broken teeth. I greased the gear with Lubriplate and heavily oiled everything else, works very smooth and will no doubt provide many years of service. The jaws are not independent and work as one unit. The backing plate is set up for a 2 1/4" 8 TPI threaded spindle and has AC-114 stamped on it's face. Ask questions and be sure because I don't want it back. I'll ship flat rate priority at 22.00 including insurance. Thanks for looking.
You are looking at a South Bend or Atlas 9" Lathe Roller Bearing Tail Stock Chuck. This will fit on a 1 1/8" OD Tail Stock. Has a broken split bushing. That would be a easy fix. Other than that it is in good working condition. If you have any questions please ask. Thanks for looking! ships in US only
UP FOR AUCTION IS A 7/8" KO LEE WHAT APPEARS TO ME TO BE A KEYLESS CHUCK. IS STAMPED A490 ON"CHUCK" AND A494 ON SHAFT AND ROUGHLY 10" LONG. I THOUGHT IT WAS FOR A METAL LATHE WHEN I PURCHASED AT A LOCAL GARAGE SALE. I WOULD LIKE TO KNOW WHAT IT REALLY IS. THANKS FOR YOUR CONSIDERATION AND HAPPY BIDDINGS! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13fd2ddbeff-0x103-
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is 40 lbs. of Steel Metal Cylinders Round Bars of various lengths. 2" diameter These range in length from approximately 2.5" 4" long. We have quite a few of these cylinders. So the exact ones you receive may be of various different lengths(most 2.5" 4" in length) and may not be exactly those in this picture. However, I guarantee you will receive at least 40 lbs. of metal, and all are 2" diameter and same shape/kind shown in the picture. No foreign bidders. No exceptions. NO CANADIANS. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine ... moreshipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item.
good used lathe tool holder- parting Armstrong USA No. 83-163 shank is approx 1/2" x 1 1/8" x 6" blade- Mo-Max cobalt P5N will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
good used lathe tool holder- knurling Armstrong USA No. shank is approx 7/16" x 1 1/8" T x 7" good knurls will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
good used lathe tool holder- knurling Williams USA No. 3-K-1 shank is approx 1/2" x 1 1/8" x 7" good coarse. Medium and fine knurls will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
good used lathe or shaper tool holder- parting Williams USA No. 33-R shank is approx 3/4" x 1 5/8" x 8" long these are a handy slotting tool for a metal shaper will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
good used tool holder for a Lathe. Metal Shaper or Planer Walton American USA No. 7 mulit position swivel head approx 5/8" x 1 3/8" x 8 1/2" holds 4 different size bits with 5/16. 3/8, 7/16 and 1/2" hss bits will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
2 good used lathe tool holder- turning marked Armstrong No. No. 4-R and No. 4-L shank is approx 7/8" x 1 5/8" x 9" 2) 1/2" hss bits will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
Classic Grabo metal spinning lathe. 24 inch swing with extra pneumatic tail stock. Good Condition. $2500 OBO Customer must pick up. Forklift available on site.
My father bought this from a neighbor's estate and now you can buy it from his. This lathe comes with a length of overhead drive shaft(see picture) This shaft would be driven by whatever power source you had by a flat belt. There would be a belt from the shaft to the lathe. But it is long gone. If I am measuring correctly. This is a 9"x28" lathe. There is some wear on the gears and some teeth are damaged(see picture) It has a three jaw chuck mounted on it. There is a four-jaw chuck and a faceplate with it that I assume fit. I do not know what the odd fittings on the legs are for. The legs appear to unbolt from the lathe bed. It may be necessary to do this to get the lathe out of my mother's basement. At least two strong men will be required to load it. We cannot crate and ship this. But we can help you load it or can haul ... moreit within a reasonable radius of the Baltimore Washington corridor if you can help us load it.
This auction is for one reconditioned good working condition.JET GHB-1340A Metal Lathe. We replaced the Jog switch and a few knobs due to shipping. The lathe came directly from JET as a scratch and dent unit. We are an authorized JET dealer. The lathe has a few minor scuffs and scratches but otherwise in very good condition. We are including FREE Truck shipping to businesses with loading dock or forklift. in the US48 States. If we ship to residence there will be additional fee of $125 for residential liftgate delivery. Please email with any questions. Thanks for looking.
This auction is for a used original Atlas Craftsman Steady Rest for a 10" Metal Lathe. Please check out my other auctions& e-mail any questions. I will combine shipping when possible& only ship to the USA. Thanks for looking& have a great day! f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13fd96e5dbb-0xfe-
Excellent Condition- Original thread dial indicator shaft with gear for a 10" Atlas or 12" Craftsman lathe. Shaft is 2 7/8" long. 1/4" diameter. 16 tooth gear is in fine order, measures 3/8" wide, 11/16" outer diameter. Excellent condition, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ good condition tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. As always. Please check your measurements ... morebefore you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
Cushman 7.5" Metal Lathe 3 Jaw Self Centering Scroll Chuck 7 1/2" Atlas Logan + Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Cushman 7 1/2" 3 Jaw Self Centering Scroll Chuck Atlas Logan Southbend etc. Should you have questions. We can be reached at 563-387-7705. PayPal Etc UPS Ground Fully Insured in the USA. Shipping rates apply to the lower 48 states. We are more than happy to ship world-wide. Please check for shipping costs. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. Analyzing"Smart Counters" only at inkFrog inkFrog Analytics.
FOR SALE IS A 10 INCH 4 JAW METAL LATHE CHUCK. I COULD NOT FIND THE BRAND NAME ON IT. I HAVE FOUND NUMBER I BELIEVE TO BE IDENTIFING THE TOLERANCES WHICH I HAVE TRIED TO HIGHLIGHT SO YOU CAN SEE THEM. THIS ITEM IS VERY HEAVY SO SHIPPING WILL BE HIGH. LOCAL PICKUP IS ALWAYS WELCOME. NO RETURNS ARE ACCEPTED FOR THIS ITEM KNOW WHAT YOUR ARE BUYING BEFORE YOU BID. ANY QUESTIONS PLEASE ASK I WILL DO MY BEST TO ANSWER THEM
Steady rest off of a southbend 9" metal lathe. Pulled off lathe and listed so it has not been cleaned at all. Posted with
This is a threading dial from a 9" southbend metal lathe that is fully functional. This was removed from the lathe and listed on here no stop for cleaning so it is exactly as it came from an operational lathe. Posted with
Jacobs chuck#2 MT No 2A 0" to 3/8" capacity. No key. Free shipping to the lower 48 states. Thanks
Model 10D-6 tailstock from an Atlas/Craftsman 10" metal lathe. MT2 taper. Comes with oil dropper. Bought and restored this to replace the tailstock on a different model lathe. But I found the proper tailstock before using this one.
Good condition. Please check out the interesting Books I have on offer this week as I am happy to combine shipping if that saves on postage.
DESCRIPTION: USED. LOOKS NEW, METAL LATHE FACEPLATE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL ... moreSHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;VINTAGE
DESCRIPTION: USED. S OME MIGHT BE NEW. PILE OF LARGER METAL LATHE CUTTI NG BIT S. SOME ARE CARBIDE TIPPED. THE SIZES ARE 5/8. 3/4. 1" CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT ... moreWAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, P
DESCRIPTION: USED. 2 STEP MOTOR PULLEY FOR THE LOGAN METAL LATHE. THE STEPS MEASURE 2 1/4- 4 1/4. THE BORE IS 1/2" CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS ... moreIN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AN
DESCRIPTION: PICK UP IS AVAILABLE. USED. HEADSTOCK FOR THE M.W. LATHE MADE BY LOGAN. THE BEARINGS MOVE FINE, NO SLOP OR GRIT. NO MISSING TEETH ON THE GEARS. THE HOUSINGS LOOK FINE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ... moreACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING
THE TOOL SHED For sale I have a Valenite VSTH16- Metal Lathe Carbide Tool Holder. Hold is used and in excellent working and cosmetic condition. Holder is 1" square and accepts triangular carbide bits. SHIPPING: Shipping Weight is 4-lbs. estimated) International Shipments will incur a $5.00 handling fee and we can ship anywhere in the world. We will combine shipping on multiple orders. Local pick up is always available and is highly encouraged! All items will be shipped within 3 business days of payment. We reserve the right to ship UPS or USPS. FREIGHT– For items requiring freight shipping(150-lbs +) we do charge a disassembling. Crating, palletizing, and shrink wrapping fee dependant on the item. Setting up freight shipments is the responsibility of the buyer. PAYMENT: Prompt payment expected within 5 days unless alternate arrangements ... moreare made. Buyer to pay with PayPal MasterCard and Visa are also accepted at our store. For credit card payments. Please call(518) 393-0056 M-F 11:30-4:30(EST) If payment is not received within the time frame allotted and no contact is made by the buyer. We reserve the right to cancel the transaction and relist the item. ABOUT US: We are a family owned and operated business. Buying and selling used and new tools since 1976. We deal with all sorts of tools and have a 4000 sq. ft. store packed to the roof full of hundreds of thousands of tools. With an inventory that is changing daily, our philosophy is that no tool should be discarded. Whether you are looking for machinist, woodworking, landscaping, or any other tools, if you don’t see it on our eBay store chances are we have it! All are welcome to come visit our store and inspect our inventory and current eBay items, our store hours are Monday– Friday 11-5, and Saturday 9-5. For dependable and quality tools: The Tool Shed The Tool Shed 416 Duane Ave Schenectady. NY 12304(518) 393-0056 Check out the rest of our eBay store at: The Tool Shed NY Shelf location: 8
Vertical working lathe with lots of machine parts.Will load on your carrier. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13fe8b03f6c-0xfa-
Up for auction is a huge lot of metal working lathe collets& wooden holder case. I am really not sure if these go to a lathe or not since I do not know a thing about this kind of tool. I got these and many other tools from an estate that I recently cleaned out. I was told these most likely go to some type of metal working or wood lathe? Many are marked: Hardinge& Enco Mfg. Included are all the collets& wooden case. The case measures: 23 inches long. 5 inches wide. GOOD LUCK BIDDING! Powered by The free listing tool. List your items fast and easy and manage your active items.
1" x 1" x 6" Indexable Lathe Tool Holder CTAPR 16- 3 Made in USA 0 This holder comes with insert as shown in pictures! If you have any questions concerning this item. Please ask? We want you to be 100% confident in the item you are considering. Check out my! Be sure to add me to your!
This is a Shun shin metal working lathe. It is in used condition but is still a great piece. It just sits here in my shop and I just don't have the need for it. It would be great if I could find someone who would be able to put this lathe to work doing what its intended to do because I just don't have a place for it. All the parts for it are accounted for and it was in working condition when it was last tested if you have any questions or need further info I would love to hear from you just shoot me and email and I will get back to you as quickly as possible. Shipping: Our shipping policy is pretty simple if you can set up your own shipping and want to go that route with it that is just fine, but if you would like us to do it that is no problem either. The only thing that we will do is set up the shipping and add it to the purchase ... moreprice of the equipment on ebay so that we can pay for it whenever it is picked up from us.
EXCELLENT ORIGINAL ATLAS CRAFTSMAN10" METAL LATHE FOLLOWER FOLLOW REST. PURCHASE THE STEADY I HAVE LISTED(290947257259) ALONG WITH THIS ONE AND SAVE ON SHIPPING. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And ... morehappy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
HiTorque Mini Lathe and Tooling Package PN4287. This includes the PN 4100 HiTorque 7 x 12 Mini Lathe and the PN 3486 Mini Lathe Tooling Package. This machine is less than 2 years old. And has never cut metal(only used for wood) The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 RPM to 2500 RPM continuously in both directions. There are no gears to shift. The cross feed and compound rest dials are graduated in 0.001" and 0.025 mm. The lathe is equipped with a 4-way indexing tool post set for 5/16" 8 mm) tools. Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch. And you can create every American Standard Metric class ... more6h thread from 0.3 to 8 mm pitch with the extra 21 tooth change gear that is included. The lathe includes a chip tray. A backsplash guard, and spreaders to give the feet a broader stance. The LittleMachineShop.com model 4100 HiTorque Mini Lathe is a version of the SIEG SC2. The tooling package contains all the tooling you need to be productive with your lathe on the first day you own it. The A2Z CNC quick change tool post set(QCTP) includes the tool post. Mounting hardware, two turning tool holders, a boring tool holder and a cut-off blade holder. The quick change tool post is made from 6061 T6 aluminum which is hard anodized for durability and appearance. No tools are required to change tools. Additional tool holders are available. The turning tool holders accept tools with 1/4" to 1/2" shank. The boring tool holder accepts boring bars with up to 3/8" round shanks. The cut-off tool holder holds 1/2" tall parting blades. The 1/2" capacity drill chuck is mounted on a short 2 Morse taper shank for the mini lathe. This chuck is specifically designed for the mini lathe tailstock. The rated capacity of the drill chuck is 1 mm(0.039" to 13 mm(0.512"
This is the 7" faceplate/ dog drive plate from an 11" Rockwell lathe(fit's any L00 spindle mount lathe) It's great american quality and it's in great shape except for some minor staining and four small tapped holes in the face. Don't miss this as the price includes s uper fast FREE Priority Mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via ... moreUSPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
3-1/2" Hole Casting number XK576 Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13febbb0635-0xff-
DESCRIPTION: USED. CUSHMAN METAL LATHE CHUC K. THE DIAMETER IS 2 9/16 APPROX. THE MOUNT AREA HAS A 1 7/8 X 1/8 DEEP RECESS APPROX. THE HOLES FOR THE MOUNT PLATE ARE 1 15/16 APART O.C. APPROX. T RIANGLE FO RMATION) THE CENTER HOLE IS 1/2" D IAMETER FROM THE BACK AND 5/8" DIA METER IN THE FRO NT APPROX. THE BODY OF THE CHU CK IS 1 9/16 THICK WITHOUT THE JAWS AND 2 1/8 THICK INCLUDING THE JAWS. IT COMES WITH 2 SETS OF JAWS AND KEY. THE JAW S OPEN AND CLOSE TOGETHER. NO MOUNT PLATE INCLUDED. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE ... moreSOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by
The following auction is for a Sears Craftsman Atlas Model 109 6" Metal Lathe 36 Tooth Change Gear 3237 The gear teeth count/part number is 36/ 3237. The gear teeth are in good condition with some wear. One of the gear teeth has a gouge on the bottom half of the gear. See picture. The gear works fine and functions properly. It is o ff of a Sears Craftsman 6" Metal Lathe Model 109. 21270 See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 3.50 for USPS 1st Class Mail with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions.
This is the banjo casting that attaches to the gearbox and supports the gears. Great original condition with no damage. Casting number is shown in the pictures. Don't miss this as the price includes s uper fast FREE Priority Mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very ... morecarefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
shop fox m1015 mini metal lathe.4 months old,have orig. manual,bill of sale paperwork and extra parts,chuck jaws,gears,etc.fuses,control oard,sets of motor brushes,comes complete w/ every accessory you will ever need cutting bits,dead center,bearing live center,drill chuck,allen wrenches,etc.machine works like a swiss watch,gibbs are tight,runs accurate,its been used so it has some honest wear but still nice again only 4 months of use.local pickup only but can and will assist if you need no problem.no reserve so will be priced right.
DESCRIPTION: USED. BELT GUARD FOR THE OUTBOARD COUNTERSHAFT ASSEMBLY ON SOME LOGAN METAL LATHES. THE TOTAL LENGTH IS 24 1/4 APPROX. THE MOUNT HOLES ARE 4 3/4 APART O.C. APPROX. NO CRACKS OR REPAIRS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED ... moreUSING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON CO
DESCRIPTION: USED. LOGAN METAL LATHE DRIP PAN. IT MEASURES 54 1/8 X 16" APPROX. THE MOUNT HOLES ARE 7 3/4 AND 38 1/4 APART O.C. APPROX. PICTURE 2 SHOWS A DENTED AREA ON THE EDGE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY ... moreSHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZI
DESCRIPTION: NEW OLD STOCK. 1/2 X 4" LONG BITS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL ... moreSHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;VINTAGE
Vintage Mounted Mini Metal Lathe With Knives& Tools Description. We are featuring a mounted vintage mini metal lathe with knives& tools. This was purchased at an estate sale from a 94 year old man's tool collection. This is very well made and in working condition and being pictured as is. It measures 27" width x 17" length. Thank you for looking and good luck with your bids! As always we will combine shipping. So check out our store"Motorcycle Man and Finer Things" by clicking on the red book icon above. For Alaska. Hawaii and international shipping please email for a shipping quote. We strive for 5 star positive feedback from all of our customers. If you have any issues or concerns when you receive this item. Please let us know before leaving negative or neutral feedback. We want to make sure you are satisfied ... morewith your purchase. After we have received feedback we will gladly do the same thing for you. If you had a great experience. Please let us know. If things could have been better- please contact us ASAP so we can make it right.
VERY NICE ORIGINAL MT3 BISON DEAD CENTER FOR A METAL LATHE MACHINIST. UNIT MEASURES 5" LONG. STAMPED WITH"BISON 8712-3 POLAND" ALONG WITH BISON STAMPED LOGO. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ff1dfadb8-0x100-
LOT OF 2 1/2" BENT LATHE DOGS FOR AN ATLAS CRAFTSMAN OR SOUTH BEND METAL LATHE. ONE IS UNMARKED AND OTHER HAS THE REMAINS OF"STRONG" WHICH I WOULD BELIEVE TO BE AN ARMSTRONG. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
Atlas Craftsman 10-12" 44 teeth metal lathe gear in good used condition. Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible. If you are buying more than one item please wait for an invoice before paying. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make other arrangements for payment. Please be aware that I ship as soon as payment is received. ... moreIf you change your mind about the item after it is shipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. I only add insurance to orders over $100 which is already included in the shipping cost. If your item is under $100 and you want to insure it at your cost please contact me before payment is made. Florida Residents I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. Please give at least 10 business days before expecting delivery. Please do not ask me to mark items with a lower value or mark as a gift. US and international gov
CENTRAL MACHINERY" LEAD SCREW LEFT AND RIGHT BRACKETS for 7X10 Metal Mini Lathe. This BRACKETS were just Clean and Refurbish. Including the re polishing of the same, which originally had manufacturing burs defects 14 D ays Return/Money B ack or Exchange. 1 day handling. We Offer 1 Day Shipping! California Residents Must Pay 8% State Sale Tax as Required by Law. Please feel free to ask any question if you don't see your answer in the pictures. GOOD LUCK AND HAPPY BIDDING! On Apr-18-13 at 02:00:26 PDT. Seller added the following information:
WARNER& SWASEY DOVETAIL TOOL HOLDER 1 X 2" HOLE 2 x 1.500" HOLES COMES WITH 1 3/4" SHANK COLLET HOLDER AS SHOWN IT HAS NO VISIBLE MARKINGS ON IT ALSO 1 3/4" BUSHING TO 2" TO FIT TOP HOLE sizes shown in photos please see all photos good working condition Free shipping if you have any questions or would like any extra photos please contact me and if you live local all items can be previewed or picked up to save on postage Please be sure to check out my other tools and equipment i can combine postage all items are sent the same or next business day thank you for viewing
Lantern tool holder for 6" Atlas and other lathes. EXCELLENT used condition. As shown. Please ask all? before bidding. I have and will be listing other tooling pieces for these 6" lathes. THANK YOU
For sale we have an ATLAS/CRAFTSMAN Draw bar cutter holder set with a 3/8 inch arbor and nut installed.Also included are the spacers to adjust the depth of the arbor.This will hold a 1/2 inch straight shank cutter.I used it for end milling on a 10 inch Atlas lathe.As I am no longer doing lathe work I am selling my lathe tools.Have a great day. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13ff44b7e23-0xe8-
This is made from 3/8 x 5/16" stock. The handle is wrapped with masking tape. The items listed here are from my late husbands collection. I try to research each item for information and accuracy but I have made mistakes. So if an item is listed incorrectly, please let me know. Thanks
CENTRAL MACHINERY" LEAD SCREW for 7X10 Metal Mini Lathe. This LEAD SCREW ROD was just Clean and Refurbish. Including the re polishing of the LEAD SCREW treads, which originally had manufacturing burs defects 14 D ays Return/Money B ack or Exchange. 1 day handling. We Offer 1 Day Shipping! California Residents Must Pay 8% State Sale Tax as Required by Law. Please feel free to ask any question if you don't see your answer in the pictures. GOOD LUCK AND HAPPY BIDDING! On Apr-18-13 at 02:00:26 PDT. Seller added the following information:
Owned and used by my late Grandfather for many years. Setting in my garage for 35 plus years. Never used by me, but seems to work and move. The lower treddle peddles and drive is missing, Granfather converted over to motor drive shown in pictures. I have a table of parts and accesories that came with the lathe when it was given to me. Needs a good home to someone that will enjoy it. Needs to be picked up at my house in Bowling Green Ky.
Metal Lathe Part Milling Attachment Tool Holder Atlas Craftsman. Not sure what this is used for but it came with a 10" craftsman metal lathe. Looks to be in great shape. I prefer to ship out by U S post office. You need to pay the total for the item& shipping, I will accept Pay-pal or U S postal $ ORDER then I will ship it out in a few days, I will combine orders to save on shipping cost. If you need more pictures or have any quest ions send me a E-mail. Thank you! CHECK OUT MY OTHER LISTINGS* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ff806eb50-0x101-
ATLAS/CRAFTSMAN MILLING ATTACHMENT#10-501/502 FOR 10" METAL LATHE GOOD SHAPE. Handle is broken. I prefer to ship out by U S post office. You need to pay the total for the item& shipping, I will accept Pay-pal or U S postal $ ORDER then I will ship it out in a few days, I will combine orders to save on shipping cost. If you need more pictures or have any questions send me a E-mail. Thank you! CHECK OUT MY OTHER LISTINGS*
Good Used 8" Engine Lathe Chuck The Watson Mfg. Co. USA 2" Thru Hole 4 Reversible Jaws Patent# 1977658 No Back Plate Powered by The free listing tool. List your items fast and easy and manage your active items.
NO RESERVE ON THIS MACHINE! HIGH BIDDER OWNS IT FOR THEIR WINNING BID! FREE SHIPPING IN THE 48 US STATES ANYWHERE WITHIN 800 MILES FROM PITTSBURGH. PA 15205, and 50 cents per mile after that range using google maps from our address, so save a ton on shipping here! You are looking at a nice Polish Made Polamco model TUM-35. 14x40 Metal Lathe, which includes a Brand New 8" 4 jaw chuck. An 8" 3 jaw chuck, and a Quick Change Tool Post Set with holder as shown(BXA/200 Size) Some specs on the machine: Swing Over Bed 14" Distance Between Centers 40" Power Required 220/440 3 phase(Or 220 1 phase with converter) Weight Approx. 3000 LBS Bed Width 10-1/4" Main Motor 4 HP Inch and Metric Threading Capable This machine is older from the late 70's or early 80's I believe. But the ways and everything are in very good shape, ... moreactually the ways are the nicest I have seen on a machine like this, no wear noticeable at all on the bed ways, the machine is ready to be put in place and put to use. Its in nice shape and runs good. This machine is 220 or 440 3 phase. And currently wired for 220 Volts. It could easily be ran from a phase converter, or VFD for single phase, if needed. It can be seen under power at our location. We are at: Quality Machine Tools. 701 Parkway View Dr. Pittsburgh, PA 15205. Please let us know you are coming first, if you want to see it running. For shipping. We can ship anywhere in the US that a tractor trailer can get to. You must be able to unload the machine with a forklift or some other way, or have it shipped somewhere they can unload for you, to be arranged by the buyer. You can also pick up at our location for a $500 discount off the winning bid. Again. High bid wins it, exact terms as described above. Good Luck! If you have any questions please email us. Or call 412-787-2876. For payments. We do Paypal, Check, Money Order, Wire Transfer, or any Major Credit Card.
South Bend heavy 9/ 9 Jr. metal lathe Screw assembly OAL 40" gear is a no. 9-32-48T. All in very good used condition. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible. If you are buying more than one item please wait for an invoice before paying. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we ... morewill make other arrangements for payment. Please be aware that I ship as soon as payment is received. If you change your mind about the item after it is shipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others
The following parts came from an 11" ROCKWELL lathe. This lathe was in great shape when it was broken up and was NOT parted out due to wear& tear! THIS AUCTION IS FOR THE FOLLOWING PARTS: This is the complete compound rest. It's in very good shape with no repairs or significant wear that I can see. Don't miss it! I'm going to include USPS Priority mail shipping for free! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback ... morefor positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
Dorian QITP-40 4-position indexible lathe quick change tool post. I purchased this. Cleaned it up, disassembled, greased and reassembled it to make sure it was ready for use- and discovered that its center height was too high for my 15" lathe. It'll fit anything 16" on up to 22" or larger with spacers. Includes tool post, shank, T-nut, retention nut and ball handle- everything you need to install on your lathe but the tool holders themselves. Will take any Dorian 40-sized or CA-sized tooling or Aloris/Phase II/knockoff CA-sized tooling. Indexes every 15* I purchased the newer Dorian QITP40N to properly fit my lathe and love how easy and fast it is to use. Price new is over $1500 and this one is in great shape you can have it for less than half that. Free shipping to lower 48, actual shipping anywhere else. Will ship international, ... morepayment via Paypal or Dwolla. Thanks for looking! 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13ffc473e1a-0x102-
I HAVE A"STAR" WORM DRIVE TEN INCH DIAMETER BY 30 INCH BED METAL/ WOOD CUTTING LATHE FOR SALE. ALSO INCLUDED ARE VARIOUS CARBIDE TIPPED DRILL BITS OF VARYING SIZES. THIS LATHE CAN CUT THREADS. OR THE WORM DRIVE CAN BE USED TO MOVE THE CUTTING TOOL. IT IS LOCATED IN WHEATON IN THE BASEMENT. WE CAN REMOVE THE LEGS. MOTOR, DRIVE BELT, AND TAILSTOCK, TO MAKE IT MORE EASILY MANAGED. YOU WILLHAVE TO HAVE SEVERAL MEN TO HELP CARRY IT OUT OF THE BASEMENT. AND YOU ARE RESPONSIBLE FOR TRANSPORTING IT. IF YOU FEEL THE PRICE IS EXCESSIVE PLEASE MAKE ME AN OFFER. CALL BILL AT 708 715 2455
This is a very nice headstock assemble. For a Atlas/Craftsman 12X36 metal lathe(model# 101.07403 and others) The casting has been completely stripped and is ready for paint to match your lathe or for a restoration project. All the parts have been removed, cleaned and inspected. The bull gear and small back gear are in excellent condition and look to be unused, as dose the pulley. The spindle gear has some slight visible ware to it, but is still in good working order. The bearings are in excellent condition and runs smooth. Comes with two oil cups, original switch and plate and nice“Craftsman“ badge. Shipping weight is 30lbs.
This auction is for a used Levin precision lathe that is in good condition and fully functional(tested) The motor control unit allows for speed control with both forward and reverse operation. The rotary motion is controlled by a footpedal which is included in the sale. The headstock and spindle rotate. Lock, and move as they should. The rotary turret tailstock advances and moves to each position as it should. The machine is well oiled and the lathe bed is in good condition. This auction includes: The headstock. Collet locking attachment, lathe bed, motor and motor drive, chip tray, two(2) drawer cabinet, bench, rotary turret tailstock, and footpedal. This machine must be shipped freight. Buyer is responsible for the freight cost. I will help to find a low cost carrier if you need assistance. I will place and strap the machine on a pallet ... moreand load at no extra charge. Buyer must take the entire machine. I have no way to remove parts. USA bidders only please. No returns on this item please; it is just to difficult to handle more than once. Email me if you need additional pictures or more detailed information about each part of the machine. Thanks for looking and GOOD LUCK BIDDING!