In 
 
Order by: 
Available to: 
Price: 
 - 
$
135
Buy It Now
$20 Shipping
Condition: New
Location: Santa Clara,CA,USA
$
26,779
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
Untitled Document Product Name: JET 321440 GH-1660ZX Lathe With ACU-RITE 200S DRO and Collet Closer Includes: 1) JET Gh-1660Zx W/200S Dro& Collet ... moreCloser Description: Features Uniquely designed exclusively by JET ISO 9001 certified manufacturer 3-1/8 Chrome molybdenum headstock gears are hardened. Ground and shaved Universal gearbox allows inch. Metric, diametral and module pitch threads, no change gears required Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces T-slotted compound slide featuring four-way tool post One piece cast iron base absorbs vibration allowing heavier cuts High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground Removable gap allows up to 23-5/8 Five position automatic carriage stop increases productivity Attractive chrome levers. Dials and knobs complete this impressive package Tolerance test certificate included 10 12 Specifications Weight(Lbs. 5795 Motor(HP) 7-1/2 HP. 230/460, 3 Ph Prewired(V. 230 Drive: Geared Head Overall Dimensions(L x W x H) In. 115 x 44 x 66 Style(Type) Engine- Large Spindle Bore Carriage Travel(In. 55-9/16 Size: 16 x 60 Follow Rest Capacity(In. 39149 Range of Spindle Speeds(RPM) 25- 1.800 Spindle Mount: D1-8 Max Tool Size(In. 1 x 1 Length of Gap(In. 12 Swing Through Gap(In. 25-1/2 Distance Between Centers(In. 60 Width of Bed(In. 13-3/8 Spindle Taper with Sleeve: MT-7(MT-5) Compound Slide Travel(In. 39569 Steady Rest Capacity(In. 1/2- 3-1/2 Other Specifications Include: Spindle Bore(In. 39508 | Range of Cross Feeds(IPR) 0006- 0365 | Accessory 2: Collet Closer | Cross Slide Travel(In. 9 | Digital Readout: ACU-RITE 200S | Range of Longitudinal Feeds(IPR) 0015- 0913 | Range of M United States: FREE LTL Shipping* In the contiguous 48 states(6-18 Day normal delivery time) Currently shipping for this item is available to the contiguous 48 US states only. Shipping is not available to Alaska or Hawaii. Due to the size and weight of many Freight items. So
$
950
Buy It Now
$0 Shipping
Condition: Used
Location: Huntington Park,CA,USA
$
191.25
Buy It Now
$0 Shipping
Condition: Used
Location: Ann Arbor,MI,USA
$
227.99
Buy It Now
$22.75 Shipping
Condition: Used
Location: Santa Rosa,CA,USA
Atlas or Craftsman 12” Metal Lathe Apron Assembly Part# 990-286(Complete) This is a functioning apron assembly from a Craftsman 12” lathe. Model# 101.28940. ... moreI have disassembled, cleaned, reassembled, and checked this assembly. It should be good to go. It includes the Gear Case Assembly, the Split Nut Assembly, and the Threading Dial Assembly. Please note that the pictures show the Threading Dial Assembly attached to the saddle. It is included with this auction but the saddle it is attached to is not. Please see the attached diagram from the catalog. This is a no reserve auction. This item is sold as is. Shipping $16.85
$
245
Buy It Now
Free Shipping
Condition: Used
Location: Gardena,CA,USA
$
444.94
Buy It Now
$0 Shipping
Condition: New
Location: China
$
34,000
Buy It Now
$0 Shipping
Condition: Used
Location: Norfolk,NY,USA
$
16,500
Buy It Now
Free Shipping
Condition: Used
Location: Sanford,FL,USA
$
625
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown,VA,USA
$
1,329.99
Buy It Now
$0 Shipping
Condition: New
Location: Anaheim,CA,USA
$
8,039
Buy It Now
$0 Shipping
Condition: New
Location: La Vergne,TN,USA
JET 321101AK Gear Head Bench Lathe Enclosed gearbox design provides smooth. Quiet operation, Hardened and ground gears are featured in the headstock and ... moregearbox, V-way bed is induction hardened and ground, Gap bed section provided for large diameter work, Adjustable gibs are incorporated in the carriage and slideways, Fast. Easy speed changes, D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings, Headstock is constantly oiled during operation, Includes: GHB-1340A with CBS-1340A Stand, Suggestion: Make an offer for 2 or more on lower priced items, Swing over Bed(in. 13 Swing over Cross Slide(in. 7-25/32 Swing Through Gap(in. 18-3/4 Length of Gap(in. 8 Distance Between Centers(in. 40 Spindle Bore(in. 1-1/2 Spindle Mount: D1-4 Spindle Taper W/ Sleeve: MT-5(MT-3) Number of Spindle speeds: 8 Range of Spindle Speeds(RPM) 70- 2.000 Number of Longitudinal and Cross Feed Rates: 40 Range of Longitudinal Feeds(IPR) 0036- 0325 Range of Cross Feeds(IPR) 0012- 0345 Number of Inch Threads: 40 Range of Inch Threads(TPI) 4- 112 Number of Metric Threads: 27 Range of Metric Threads: 0.2- 6 Max Tool Size(in. 5/8 x 5/8 Compound Slide Travel(in. 2-11/16 Cross Slide Travel(in. 6-5/16 Carriage Travel(in. 35 Tailstock Spindle Travel(in. 3-3/4 Taper in Tailstock Spindle: MT-3 Steady Rest Capacity(in. 2-5/8 Follow Rest Capacity(in. 2-3/4 Width of Bed(in. 7-3/8 Motor: 2HP. 230V, 1Ph Prewired: 230V Brand: Jet Height: 47 inch Width: 32 inch Length: 71 inch Net Weight: 1200 pound Gear box gives wide inch threading and feed capabilities with no gear changes V-way bed design is induction hardened and ground Gap bed section provided for larger diameter work Independent leadscrew and feed rod Spindle acuation control is apronmounted Compound and cross slide have backlash elimination Adjustable gibs are incorporated in the carriage and slideways Tailstock may be offset for turning tapers and includes an inch-metric graduated quill Oil pan inc
$
30
Buy It Now
Free Shipping
Condition: Used
Location: Montville,NJ,USA
$
664.59
Buy It Now
$0 Shipping
Condition: New
Location: China
$
19,500
Buy It Now
Free Shipping
Condition: Used
Location: Toledo,OH,USA
$
800
Buy It Now
Free Shipping
Condition: Used
Location: Lenapah,OK,USA
$
671.21
Buy It Now
$0 Shipping
Condition: New
Location: City of Industry,CA,USA
$
100
Buy It Now
Free Shipping
Condition: Used
Location: Bay Village,OH,USA
$
23,639
Buy It Now
$0 Shipping
Condition: New
Location: La Vergne,TN,USA
$
69.99
Buy It Now
$9 Shipping
Condition: Used
Location: Swartz Creek,MI,USA
$
300
Buy It Now
$0 Shipping
Condition: Used
Location: Millstadt,IL,USA
$
19.99
Buy It Now
$8.5 Shipping
Condition: Used
Location: Decatur,TX,USA
$
25,939
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
CPO Model 321388. List Price: $25.539.99, CPO Price: $21.899, You save: $3.640.99(14% Availability: In Stock, Uniquely designed exclusively by JET, ISO ... more9001 certified manufacturer, 3-1/8-in bore spindle is supported by two tapered and one ball bearing, Chrome molybdenum headstock gears are hardened. Ground and shaved, Universal gearbox allows inch. Metric, diametral and module pitch threads, no change gears required, Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces, T-slotted compound slide featuring a four-way tool post, One piece cast iron base absorbs vibration allowing heavier cuts, High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground, Removable gap allows up to 23-5/8-in diameter work on 14-in. 25-7/8-in on 16-in, 27-1/2-in on 18-in and 29-1/2-in on 22-in, Five position automatic carriage stop increases productivity, Attractive chrome control levers. Dials and knobs complete this impressive package, Tolerance test certificate included, Number of Metric Threads, 24, Range of Inch Threads(TPI) 1-5/8- 72, Follow Rest Capacity, 1/2-in- 3-1/2-in, Compound Slide Travel, 5-1/8-in, Cross Slide Travel, 9-in, Number of Inch Threads, 61, Length of Gap, 12-1/4-in, Spindle Mount, D1-8, Range of Longitudinal Feeds(IPR) 0015- 0913, Pre-Wired, 230V, Swing Over Bed, 16-in, Steady Rest Capacity, 3/8-in- 7-in, Max Tool Size, 1 x 1, Spindle Taper w/ Sleeve, MT-7(MT-5) Swing Through Gap, 25-7/8-in, Spindle Bore, 3-1/8-in, Range of Spindle Speeds, 25- 1.800 RPM, Range of Metric Threads, 05- 20, Motor, 7-1/2 HP 3 Ph 230/460V, Width of Bed, 13-3/8-in, Swing Over Cross Slide, 10-in, Range of Cross Feeds(IPR) 0006- 0365, Carriage Travel, 55-in, Distance Between Centers, 60-in, Number of Longitudinal and Cross Feed Rates, 12, Taper in Tailstock Spindle, MT-4, Tailstock Spindle Travel, 5-in, Number of Spindle Speeds, 12, GH-1660ZX Lathe with ACU-RITE 300S DRO- 321388, 10-in Scroll 3-Jaw Chuck With Top Reversing Jaws, 12-in Independent 4-Jaw Chuck, 1
$
119
Buy It Now
$0 Shipping
Condition: New
Location: Ontario,CA,USA
$
149.99
Buy It Now
Free Shipping
Condition: Used
Location: South El Monte,CA,USA
$
25,349
Buy It Now
$0 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
23,179
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
$
450
Buy It Now
$0 Shipping
Condition: Used
Location: Lenapah,OK,USA
$
24,799
Buy It Now
$0 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
199.99
Buy It Now
Free Shipping
Condition: Used
Location: Cornell,IL,USA
$
75
Buy It Now
$12 Shipping
Condition: Used
Location: Mahwah,NJ,USA
$
12.1
Buy It Now
Free Shipping
Condition: Used
Location: Tifton,GA,USA
$
24,479
Buy It Now
$0 Shipping
Condition: New
Location: La Vergne,TN,USA
$
549
Buy It Now
$22 Shipping
Condition: Used
Location: Warwick,MD,USA
$
99.99
Buy It Now
$14.75 Shipping
Condition: Used
Location: North Bend,WA,USA
$
269.99
Buy It Now
$18.75 Shipping
Condition: Used
Location: Berlin,CT,USA
ORIGINAL ATLAS CRAFTSMAN 12" METAL LATHE MACHINIST STEADY REST TOOL PT# L3-326. ALSO INCLUDED IS A SECOND SET OF FINGERS. Original shipping for returned ... moreitems is not refunded. Any box shown in the photo is for information purposes only and may not be included when the item is shipped. To facilitate shipping. If you specifically want the box please let me know. International buyers contact me for a shipping quote. International shipping will be by USPS priority mail. Or Express mail. I do not ship International First Class because there is no tracking or insurance. For Alaska. Hawaii. And US territories Shipping may be higher. Contact me for a shipping quote. A $5.00 handling fee will be added to International orders. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Contact me with any questions via ebay or call 610-449-1218. I will combine shipping on multiple orders.
$
78
Buy It Now
Free Shipping
Condition: Used
Location: Slatington,PA,USA
$
60
Buy It Now
$10 Shipping
Condition: Used
Location: Mahwah,NJ,USA
Excellent Condition- Original South Bend cross slide thread cutting stop. For use with a South Bend 9" or 10K lathe. Retains original South Bend ... moredecal, pin and set screw. In excellent condition, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
28,679
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
CPO Model 321487. List Price: $25.079.99, CPO Price: $21.499, You save: $3.580.99(14% Availability: In Stock, ISO 9001 certified manufacturer, 3-1/8-in ... morebore spindle is supported by two tapered and one ball bearing, Chrome molybdenum headstock gears are hardened. Ground and shaved, Universal gearbox allows inch. Metric, diametral and module pitch threads, no gear change required, Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces, T-slotted compound slide featuring a four-way tool post, One piece cast iron base absorbs vibration allowing heavier cuts, High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground, Removable gap allows up to 23-5/8-in diameter work on 16-in and 27-1/2-in on 18-in, Five position automatic carriage stop increases productivity, Attractive chrome control levers. Dials and knobs complete this impressive package, Overall Dimensions, 66-in x 44-in x 136-in(H x W x L) Follow Rest Capacity, 1/2-in- 3-1/2-in, Compound Slide Travel, 5-1/8-in, Maximum Tool Size, 1-in x 1-in, Number of Inch Threads, 61, Cross Slide Travel, 9-in, Number of Longitudinal and Cross Feeds, 122, Spindle Mount, D1-8, Weight, 7.100 lbs. Pre-Wired, 230V, Swing Over Bed, 18-in, Steady Rest Capacity, 3/8-in- 7-in, Swing Through Gap, 27-1/2-in, Spindle Bore, 3-1/8-in, Range of Spindle Speeds, 25- 1.800 RPM, Motor, 7.5 HP. 3 Ph 230V/460V, Width of Bed, 13-3/8-in, Swing Over Cross Slide, 11-in, Range of Cross Feeds, 0.0006- 0.0365 in/rev. Carriage Travel, 75-in, Range of Inch Threads, 1-5/8- 72 TPI, Taper in Tailstock Spindle, MT-5, Spindle Taper with Sleeve, MT-7(MT-5) Tailstock Spindle Travel, 5-in, Number of Spindle Speeds, 12, Range of Longitudinal Feeds, 0.0015- 0.0913 in/rev. GH-1880ZX Lathe with 2-Axis ACU-RITE DRO 200S Installed- 321487, 10-in 3-Jaw Chuck with Top Reversing Jaws, 12-in 4-Jaw Chuck, 16-in Face Plate, 4-Way Tool Post, Follow Rest, Large Capacity Steady Rest, Fully Integrated Coolant System, Full Length Splash Guard and Coolant System
$
175
Buy It Now
$0 Shipping
Condition: Used
Location: Pennsburg,PA,USA
$
29.95
Buy It Now
$5.55 Shipping
Condition: Used
Location: Santa Rosa,CA,USA
$
50.99
Buy It Now
$8 Shipping
Condition: Used
Location: Pomona,CA,USA
$
500
Buy It Now
$30 Shipping
Condition: New
Location: Mahwah,NJ,USA
$
24,119
Buy It Now
$0 Shipping
Condition: New
Location: La Vergne,TN,USA
$
26,279
Buy It Now
$0 Shipping
Condition: New
Location: La Vergne,TN,USA
CPO Model 321495. List Price: $24.729.99, CPO Price: $21.199, You save: $3.530.99(14% Availability: In Stock, ISO 9001 certified manufacturer, 3-1/8-in ... morebore spindle is supported by two tapered and one ball bearing, Chrome molybdenum headstock gears are hardened. Ground and shaved, Universal gearbox allows inch. Metric, diametral and module pitch threads, no gear change required, Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces, T-slotted compound slide featuring a four-way tool post, One piece cast iron base absorbs vibration allowing heavier cuts, High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground, Removable gap allows up to 23-5/8-in diameter work on 16-in and 27-1/2-in on 18-in, Five position automatic carriage stop increases productivity, Attractive chrome control levers. Dials and knobs complete this impressive package, Overall Dimensions, 48-in x 40-in x 97.5-in(H x W x L) Follow Rest Capacity, 1/2-in- 3-1/2-in, Compound Slide Travel, 5-1/8-in, Maximum Tool Size, 1-in x 1-in, Number of Inch Threads, 61, Cross Slide Travel, 9-in, Number of Longitudinal and Cross Feeds, 122, Spindle Mount, D1-8, Weight, 5.550 lbs. Pre-Wired, 230V, Swing Over Bed, 16-in, Steady Rest Capacity, 3/8-in- 7-in, Swing Through Gap, 25-7/8-in, Spindle Bore, 3-1/8-in, Range of Spindle Speeds, 25- 1.800 RPM, Motor, 7.5 HP. 3 Ph 230V/460V, Width of Bed, 13-3/8-in, Swing Over Cross Slide, 10-in, Range of Cross Feeds, 0.0006- 0.0365 in/rev. Carriage Travel, 35-in, Range of Inch Threads, 1-5/8- 72 TPI, Taper in Tailstock Spindle, MT-4, Spindle Taper with Sleeve, MT-7(MT-5) Tailstock Spindle Travel, 5-in, Number of Spindle Speeds, 12, Range of Longitudinal Feeds, 0.0015- 0.0913 in/rev. GH-1640ZX Lathe with ACU-RITE 200S Collet Closer- 321495, 10-in 3-Jaw Chuck with Top Reversing Jaws, 12-in 4-Jaw Chuck, 12-in Face Plate, 4-Way Tool Post, Follow Rest, Large Capacity Steady Rest, Fully Integrated Coolant System, Full Length Splash Guard and Coolant System, Larg
$
95
Buy It Now
$0 Shipping
Condition: Used
Location: Pennsburg,PA,USA
$
25,799
Buy It Now
$0 Shipping
Condition: New
Location: La Vergne,TN,USA
$
80
Buy It Now
$16 Shipping
Condition: Used
Location: Swansea,MA,USA
$
12,299
Buy It Now
$0 Shipping
Condition: New
Location: Suwanee,GA,USA
$
1,999.99
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown,VA,USA
$
299.99
Buy It Now
$69.99 Shipping
Condition: Used
Location: Lombard,IL,USA
$
109,500
Buy It Now
Free Shipping
Condition: Used
Location: Sanford,FL,USA
$
50,299
Buy It Now
$3,844 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
8,039
Buy It Now
$0 Shipping
Condition: New
Location: La Vergne,TN,USA
CPO Model 321101AK. List Price: $6.999, CPO Price: $5.939, You save: $1.060(15% Availability: In Stock, One of the most popular JET.Lathes now comes with ... morean enclosed gear box, Enclosed gear box design provides smooth. Quiet operation, Fast. Easy speed changes, Hardened and ground gears are featured in the headstock and gearbox, D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings, Headstock is constantly oiled during operation, Gear box gives wide inch threading and feed capabilities with no gear changes, V-way bed design is induction hardened and ground, Gap bed section provided for larger diameter work, Independent lead screw and feed rod, Number of Metric Threads, 27, Steady Rest Capacity, 2-5/8-in, Follow Rest Capacity, 2-3/4-in, Spindle Taper w/ Sleeve, MT5(MT-3) Swing Through Gap, 18-3/4-in, Compound Slide Travel, 2-11/16-in, Number of Longitudinal and Cross Feeds, 40, Range of Spindle Speeds, 70- 2.000 RPM, Spindle Bore, 1-3/8-in, Range of Metric Threads, 02- 6 mm, Motor, 2 HP. 1 Ph 230V, Maximum Tool Size, 5/8-in X 5/8-in, Length of Gap, 8-in, Number of Inch Threads, 40, Cross Slide Travel, 6-5/16-in, Spindle Mount, D1-4, Swing Over Cross Slide, 7-25/32-in, Range of Cross Feeds, 0012- 0345 in.rev. Carriage Travel, 35-in, Distance Between Centers, 40-in, Range of Inch Threads, 4- 112 TPI, Weight, 1215 lbs. Number of Spindle Speeds, 8, Range of Longitudinal Feeds, 0036-0325 IPR, Lathe w/ CBS-1340A Stand- 321101AK, 2-Year, For full warranty information. Please contact us at 800-714-0969* Warranty valid for US customers only, Orders outside the US are not protected by manufacturer warranty. All orders are still covered by CPO's 30-day Money Back Guarantee) Shipping and customs charges for non-US orders will be calculated when the item is added to cart, All corded products are designed to work with North American 110/120V outlets only. Products used in foreign outlets without proper use of a voltage adapter/converter will not be covered b
$
129,500
Buy It Now
Free Shipping
Condition: Used
Location: Sanford,FL,USA
Brand New. Just pulled off pallet May 30 2013, never been hooked to power or air. We are replacing them with a different machine. This auction does include ... morethe BAR3010SS Bar feeder. It has liners from.375" through 2.75" The feeder itself will handle 3" bar stock. Buyer pays all shipping. We also have a DS30SSY and a VF2TR for sale.
$
139.99
Buy It Now
$0 Shipping
Condition: Used
Location: Ivoryton,CT,USA
$
279,500
Buy It Now
Free Shipping
Condition: Used
Location: Sanford,FL,USA
More photos detail and video are available upon your request. Call Gregg. Scott, Mark or Steven Doosan Daewoo Puma 2000SY CNC Lathe with Live Tool and ... moreSub Spindle and Y Axis(2005) Installed in(2006) Y Axis. Sub Spindle, Live Tooling, Bar Feed, Chip Conveyor, Fanuc 18iTb CNC Specifications(Preliminary) Swing Over Bed: 23.6" Swing Over Carriage: 21.6" Distance Between Spindles: 33.8" X-Axis Travel: 9.84" Y-Axis Travel: 3.94" Z-Axis Travel: 22.8" Spindle Speeds: 5000 main/ 6000 Sub, Equipped With: Full'C' axis on both Spindles. 6" Sub-Spindle Chuck, Collet Chuck on Main Spindle Chuck, Automatic Tool Presetter, Rigid Tapping On Both Spindles/ Nice Assortment of Live Tooling, Tool Monitoring System, Box Way Construction, Turbo Systems Chip Conveyor, SMW Space Saver 2200 Barfeed, Y" Axis Traverse, Contact Us Call for more information: 773-866-9600. Ask for Gregg or Scott Click for video:
$
249.5
Buy It Now
Free Shipping
Condition: Used
Location: San Jose,CA,USA
$
34.95
Buy It Now
$0 Shipping
Condition: Used
Location: Topeka,KS,USA
$
150
Buy It Now
$15 Shipping
Condition: Used
Location: Mahwah,NJ,USA
 In 

Past Items  
 
The shank is 3/8" x 7/8" The shank has some pretty bad pitting from rust. The top of the shank looks very clean and the bit is in good condition with lots of life left. Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
Hole size minimum is 1-7/8" and maximum is 2-5/16"
There is a web broken out. It is on the tailstock end underneath just the vertical web part. This is 53-1/2" inches long. It is about 9" wide and about 6" inches high. This is still a very strong frame even with the broken casting. I was going to use it for a wood lathe. There is a rack running the length and I have the pinion on a shaft. I'm not really up on shipping larger stuff. Package should be about 10" by 10" by 55" inches long and about 73 pounds. Should go UPS. Also on the back there is a flat cut to put the rack and pinion back there. Just below the machined area if you look close there are areas that have grind marks.
The base is missing. The wheel is just a pulley with the OD cut down. Enco has good replacement hand wheels. I took the spindle completely out and photographed it the scale lines are a little hard to read.
6 inches from bottom to center. Bearings that fit this. SKF30705 JQ/2 13 073Z. ID.981. OD 2.048. or similar. The stop pin for back gear is still on it and it moves freely. base is 6.5 by 6.5 inches. The tongue is 1.5 inches.Overall height is 8 inches. width at bearing housing outside 6 7/16" inside is 4 1/8"
ATLAS 618 CRAFTSMAN 6" STEEL LATHE GEAR DOOR COVER GUARD Part# M6-28/ M6-95 this is a smaller cover than some of the others. I have measured in a few places so Please make sure it well fit. The cover is steel. I prefer to ship out by U S post office. You need to pay the total for the item& shipping, I will accept Pay-pal or U S postal $ ORDER then I will ship it out in a few days, I will combine orders to save on shipping cost. If you need more pictures or have any questions send me a E-mail. Thank you! CHECK OUT MY OTHER LISTINGS*
Large Boring Bar holder. Unknown Maker. Possibly South Bend. Not new, but good working condition. Would take a bar up to 1 7/8" Appears to me it would be for at least a 12" lathe, maybe 16" not sure. Will ship Priority Mail:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-140575799ce-0xf5-
ORIGINALLY FROM CRAFTSMAN 101.06242 WOOD LATHE CONGRESS 4 STEP ALUMINUM 5/8" BORE WITH 3/16 KEYWAY DIAS. ACTUAL VERNIER 1 15/16. 3 9/16, 3 9/32, 3 15/16 EXCELLENT.625 LITE PUSH FIT WITH DOWEL PIN FOR 1/2" BELTS O/A HEIGHT 2 1/2" O/A BORE RECESSED 1 9/16" SEE PHOTO) TRUE RUN NO CHIPS. BENT ETC. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-14057751375-0xfb-
Atlas 10 or Craftsman Metal Lathe Banjo Gear Bracket Part# 9-25 I recently bought two Atlas 10 lathes that came from an older gentleman so some tooling and parts are excess to my needs. I will be listing these as I identify what I do not need. This is a banjo gear bracket and mounting stud for an Atlas 10 metal lathe. As such it should also fit some Craftsman 10” metal lathes. This bracket has been brazed where the arrows are pointing. Please see the pictures. This is a no reserve auction. This item is sold as is. Please see my other items for sale. Shipping is $12.85.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1405775145a-0x103-
U. S. A. bids only please. This Craftsman metal lathe is model 109-20630. It is in excellent condition. Gears turn and lathe has one cutting tool attached. No motor with this. It will be crated for shipping via UPS GROUND. Check out the photos to see the great condition of this metal lathe. What you see pictured is what you will get. Thank you for looking. Please ask any questions you may have before you bid.
This is a vintage Heavy Duty Boice Crane Gap Bed Wood Lathe. These were also used for Metal Spinning. Comes with original belt guard and Cast Iron Legs. Note that the spindle threads are a little goofed up and will need to be addressed before using a face plate. But spindle turning is fine. This has a multi-step pulley to change speeds, the original indexed upper pulley, link belt pulley, and modern Safety switch. Too big/heavy to ship. So local Pickup only- but I can help load.
VERY VERY VERY HEAVY! PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. Mubea Shear. WOOD BASE WILL NOT BE INCLUDED IN THIS SALE. I will have to take it apart. If the buyer does not want me to take it apart, it will have to go into a larger box. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. ... moreSold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.ZZA
CREDIT CARD PAYMENT OVER THE PHONE OR PAYMENT IN PERSON AT TIME OF PICK UP ARE THE ONLY FORMS OF PAYMENT ACCEPTED ON THIS ITEM. THAT IS OUR POLICY ON ITEMS OVER $500 Selling a nice Logan 15" metal lathe. Machine is approximately 46" center to center. It includes a 3 jaw chuck. Steady rest, tool post, a few cutters both carbide and high speed steel. Machine has been upgraded with a 5 horsepower single phase Baldor motor. It is equipped with variable speed so it has infinitely adjustable speed control simply by turning a knob while the machine is running. No need to shut down and change belts ever again. Machine is in good condition. WE HAVE A FORKLIFT HERE TO LOAD IT ONTO A TRUCK OR TRAILER. MACHINE WEIGHS APPROXIMATELY 1100 LBS FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 ... more3975. PLEASE EMAIL OR CALL US FOR A SHIPPING QUOTE. SHIPPING TO A COMMERCIAL LOCATION IN THE CONTINENTAL US SHOULD BE BETWEEN 250-400 DOLLARS. BUT YOU MUST CONTACT US FOR AN EXACT PRICE. LOCAL PICK UP IS MORE THAN WELCOME, BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. CREDIT CARD IS THE ONLY METHOD OF PAYMENT. WE CAN TAKE A CREDIT CARD OVER THE PHONE. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
Excellent condition metal turning package for Rockwell/Delta 12" wood lathes. This kit has been stored in a box high up on a shelf for decades. The pictures speak for themselves. This item is in amazing condition with only light chips to the original paint. This set up appears to have been used only very minimally. The machined surfaces and chrome knobs are immaculate. The only negative I have found is that the lantern tool post is missing its rocker shim. This package comes with the following items: Compound cross slide Tool post. Tool holder with boring bar( Williams no.81 boring) Three jaw chuck with two sets of jaws and wrench with the original box.
good used 4C collet draw tube no mfg marked tube is approx 1.050" dia x 15" overall length please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
ORIGINAL HARDINGE#3+#4 CATARACT METAL LATHE ROCKER TOOL POST FINE USED Click to Enlarge Click to Enlarge ORIGINAL HARDINGE#3+4 CATARACT LATHE ROCKER TOOL POST. RARE AND FINE USED TOOL. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
YOU ARE BIDDING ON AN ENTIRE MACHINIST PACKAGE WHICH INCLUDES THE FOLLOWING ITEMS: 1) SouthBend lathe in GREAT condition! Ive used this lathe a few times since I've owned it and it has to be one of the tightest tolerance lathe Ive used in a long time(ALL WAYS AND BEARINGS ARE TIGHT) runs off 110V 2) dial indicator with magnetic base! This dial indicator is a solid accurate indicator manufactured by ENCO 3) Machinist tool box made by SCHARTOW TRON/SIPCO full of the needed tools for lathe work. The box includes the following: a) AUDELS machinist handbook b) Brown and Sharp hole gauge set c) Various lathe tools and shims d) steel box with US made drills e) a drawer full of round end mills(usable) f) a drawer full of square end mills(usable) g) a drawer full of taps and a tap handle h) Starrett dial indicator i) craftsman wiggler set j) thread ... moregauge set k) Starrett dial depth gauge This package is a great deal and will be shipped as pictured on the pallet. Everything in this package is high quality professional tools that have minimal wear and tear. YOU WILL NOT BE DISAPPOINTED WITH THIS PACKAGE DEAL! PLEASE ASK ANY QUESTIONS YOU HAVE! all items including pallet weigh around 500lbs. SHIPPING IS NOT 1$. WE MUST PUT A COST FOR SHIPPING IN ORDER TO RUN AS AN AUCTION. SHIPPING ARRAIGNMENTS AND COST ARE RESPONSIBLE FROM THE BUYER. WE SUPPLY ITEM ON PALLET/WRAPPED IN PLASTIC AND WE LOAD ON ANY TRUCK VIA FORKLIFT. BUYER IS RESPONSIBLE FOR SHIPPING ARRAIGNMENTS AND COST Posted with
Japan badge devoted to the exhibition of the japanese metal-working lathes in the soviet capital city Moscow 16-20.X.1963. The badge is enameled. click below to enlarge: View my other auctions. Combine and save on shipping. Thank you for looking and for bidding. Check out my other items! Check out my We ship worldwide. Buyer to pay shipping cost- see the eBay auction details. Shipping costs: By Registered Mail for any country. The item will be shipped from Bulgaria. Delivery to Europe may take about 12-14 days. To the US- about 20 days, to Australia, Asia and rest of the world- 22 days. All items are unconditionally guaranteed authentic. Genuine and as described. All sales are final. Your bid is a contract. If you do not agree with the price do not bid. Please. You have to arrange a payment in one week. Multiple Purchases: I combine multiple ... morepurchases to save on shipping charges. Multiple orders will be combined in one shipment. But please contact us before paying for more than one item. Please do not complete checkout or use Paypal on individual items. If you are bidding or purchasing others. Request total from seller through Ebay or email, when you want a total with savings reflected. Return policy details: We always describe items accurately and in detail. We only refund if an item does not match the auction description. Items are returned at the buyers cost. A refund of the auction price less postage will be issues on safe arrival of item. View my other auctions. Combine and save on shipping. Thank you for looking and for bidding. Check out my other items! Check out my Powered by The free listing tool. List your items fast and easy and manage your active items.
good used lathe face plate 1 7/8-8 tpi mount x approx 8" dia please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
ORIGINAL Vintage Craftsman Metal Lathe 12" Swing 36" Bed. Working fine Model 101. This only comes with what you see in the pics. This is for Local pick up in Fort Lauderdale FL 33066 you can call any time 954-554-3144 for any questions you may have. When you come to pick it up if for some reason you are not happy with it we can cancel the transition. Please pay in cash when picking up. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14060335782-0x100-
Very Nice- Complete original back gear assembly for a 9" or 10K South Bend lathe. Includes original taper pins. Oil screw and all hardware. Gears are in fine order. Moves freely and smoothly on eccentric shaft. Nice complete original assembly. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~ 3" Diameter 4 jaw indpendant 1111703 someone put a sleeve over the stem stem inside is 7/8" diameter tooling auctions: Lathes may vary in models/years/etc; please ... morebe sure you are bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
Logan Metal Lathe Saddle Assembly Part# LA 110 This is a saddle assembly from a Logan metal lathe that I think is a series 200 or 210. Unfortunately Logan did not always mark the model numbers on their lathes. I have disassembled. Cleaned, and checked out this part. It works fine. The action is very smooth. It is missing one of the felt oiler holders. Overall this item is in pretty good shape. Please see all of the pictures for this items condition. This is a no reserve auction. This item is sold as is. Please see my other items for sale. Shipping is $16.85
Logan Metal Lathe Apron Assembly(complete) Part# LA 111 This is a complete apron assembly(part number LA 111) from a Logan metal lathe that I think is a series 200 or 210. Unfortunately Logan did not always mark the model numbers on their lathes. I have disassembled. Cleaned, and checked out this part. It works fine. The teeth on the gears are the sharpest I’ve ever seen on a used lathe. The half nut is in good condition and functions smoothly. The large Allen screws to mount it to the saddle are also included. Please see the pictures for this items condition. This is a no reserve auction. This item is sold as is. Please see my other items for sale. Shipping is $16.85
UNIMAT MODEL SL-1000/ SL1000 METAL MINI-LATHE W/ BOX& ACCESSORIES- MADE IN AUSTRIA. POWERED-UP& APPEARED TO RUN PROPERLY. INCLUDED ARE PICTURED PARTS. ETC. Very Good Used Condition. Buyer Pays All Shipping& Insurance Sold"As Is" No Returns On Aug-08-13 at 14:50:17 PDT. Seller added the following information: Click to open supersize image
good used lathe tool holder- knurling good knurls- head swivels shank is approx.880" T x 5/8" W x 5 1/2" long will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
Vintage Cintra Jewelers Watchmakers Metal Lathe 220 Volts. It still has the European plug it comes with a 3" 3 jaw Furkardt chuck that fits on it, I added a indexing attachment and some collets. I hooked it up to a 220 volt line and it seemed to work OK.I picked this up from a Jeweler who brought it here from Europe I think it is from Switzerland. I HAVE A LOT MORE DIFERANT PICS JUST ASK AND I WILL SEND SOME. Local pick up in Ft Lauderdale FL 33066 I do have a 2'x3' pallet that it will fit on to ship this, it is very heavy. You will have to arrange all the shipping arrangement's for this and I will not be held responsible for any dam/age to it. I will mount it to the pallet. If you have any questions give me a call 954-554-3144 thanks frank* I have taking some more pictures of it so if you need more just let me know. 8/2 ... moreUpdate on shipping this, I called Fed-x and if I take this apart some and put it in a few separate boxes they can ship it. Not sure how much it will be that will depend on were it goes. I will only ship it to lower 48 states.
Very Nice- Original Williams carbide right hand turning tool holder with 1/4" bit. Tool is stamped"J.H. WILLIAMS& CO. DROP FORGED IN U.S.A. on one side and"NO. T-0-R WILLIAMS CARBIDE TURNING-TOOL HOLDER" on the other. Shank is 4 1/4" long. 15/16" high and 3/8" thick. Cutting bit is included. All in fine order, as shown. In the photo. It appears that there is a stress crack where you insert the cutting bit. I looked at this location with a magnifier, it appears to be in the casting and it is not a crack. It is a difficult spot to look at, if I am wrong, and it is determined that it is a crack, I will cover your shipping cost to send it back to me, as well as issue a full refund. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with ... morecombined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Good Used 8 1/4" Engine Lathe Chuck with Key Cushman Ind. Inc. Hartford. CT USA 2" Thru Hole 4 Independant Jaws NK SVS 101664KY Stamped on top Powered by The free listing tool. List your items fast and easy and manage your active items.
UNIMAT DB200 LATHE THIS LATHE IS PRE-OWNED IN GOOD CONDITION. WORKS GREAT- INCLUDES LATHE ONLY W/ 3 SIZES OF DRIVE BELTS. PLEASE REFER TO PHOTOS FOR EXACT CONDITION. SHIPPING IS FAST& FREE! CHECK MY FEEDBACK& BUY WITH CONFIDENCE.
The following auction is for a Atlas Model 10100 6" Metal Lathe Thread Dial Threading 101 MKII 3950 MK2 It is in fine used condition with some wear. O ff of a Atlas Model 10100 6" Metal Lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 4.0 0 for USPS 1st Class Mail with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
Used South Bend 9" metal lathe Model number CL344Z Bed is 3 1/2' CTC about 24" bore is 7/8" All gears are in good shape. The lathe itself has some wear in the ways with some dinges and dents, minor scratching. There is also some wear on the compound from the chuck. This lathe includes 5" 3 jaw chuck, new quick change toolpost with 5 holders, thread dial, forward only drum switch, and quick change gearbox. The backlash is about 1/2 turn in crossfeed and 1/2 turn in compound. The spindle is 1 1/2" 8tpi. It has a 110 volt motor and is on the original fabricated South Bend base cabinet. This lathe runs good and all functions work fine. The feed selection chart is scratched. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. ... moreMissouri, forklift loading is free. Email me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with eBay Mobile. Posted with
NICE ORIGINAL LEAD SCREW SUPPORT BEARINGS WITH MOUNTING BOLTS FOR A MODEL C 9" SOUTH BEND METAL LATHE. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE ORIGINAL READY TOOL CO DEAD CENTER FOR A METAL LATHE MACHINIST. UNIT MEASURES 3/4" AT BASE. 15/16" AT THE TOP WHERE POINT BEGINS TO RISE AND 5 1/2" LONG. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
DESCRIPTION: USED. GOOD CONDITION 72-T CHANGE GEAR FOR LOGAN METAL LATHES. NO MISSING TEETH. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING ... moreBIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I AL
DESCRIPTION: USED. GOOD CONDITION, CHANGE GEAR FOR LOGAN METAL LATHES. NO MISSING TEETH. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING ... moreBIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO B
Atlas 10 or Craftsman Metal Lathe Set of 12 Change Gears I recently bought two Atlas 10 lathes that came from an older gentleman so some tooling and parts are excess to my needs. I will be listing these as I identify what I do not need. This is a set of 12 change gears for an Atlas 10 metal lathe. As such they should also fit Craftsman 10” metal lathes. These gears appear to be in good shape and fairly clean. Please see the pictures for their condition. This is a no reserve auction. This item is sold as is. Please see my other items for sale. Shipping is $12.85
The following parts came from an 11" ROCKWELL lathe. This lathe was in great shape when it was broken up and was NOT parted out due to wear& tear! THIS AUCTION IS FOR THE FOLLOWING PARTS: This is the headstock pulley cone with integral pinion gear. It's all in excellent shape with no damage or signs of heavy wear. This is a hard to find part. Don't miss it! I'm going to include USPS Priority mail shipping for free! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will ... moreget your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky item
good used travel stop marked Allen approx 1" across widest part of V will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
Cardiff Major Gap Bed LATHE My father in law was a optical machinist and keep his equipment in excellent condition. This machine was purchased NEW and he built gun barrels with this lathe. The lathe was inspected and it holds tolerance. Has good running gears, can thread, good ways. I measure the chuck and it is about 9 inches maybe a little less. The distance between the chuck and tailstock is 36" I do not know much about machining. But will try to answer any questions. Call Jeff at 760 420-1441 try to call as I am not at a computer often. You can come see the machine in San Marcos. CA. We can hook up and let you try it out. 220 volt single phase. This machine DOES NOT come with the tool holder shown. BUYER will pay for all shipping. I have a contact that can deliver for 1.50 a mile. Call for details. Posted with
METAL LATHE MILLING ATTACHMENT. I'M NOT SURE THE BRAND. COULD BE SOUTHBEND, LOGAN, CRAFTSMAN, ATLAS, CLAUSING. BUT WILL MAKE AN EFFORT OVER NEXT FEW DAYS TO FIND OUT. IF ANYONE OUT THERE KNOWS, I APPRECIATE THE HELP! THANKS IN ADVANCE. IT'S IN EXCELLENT CONDITION. NO SIGNS OF WEAR, COLLISIONS, ACCIDENTS. I'M SURE IT LIVED A GREAT LIFE ON SOMEONE'S SHELF. NOW IT'S TIME TO GET IT IN THE GAME MAKING STUFF.
Microlux 7x16 lathe Up for sale is a Microlux 7x16 lathe. This is a great little unit and Just needs some clean up and oiling. There are 2 sets of interchangable jaws to hold different stock and the chuck key. You can get any type of bits or extra tooling needed online at Micro Mark. I am including anyhing I can with this lathe. The bottom and rear backing plate are also there and interchangle gears if you get into threading. These are pretty much the king of mini lathes. Only reason I am selling this is because I got a hold of a huge Southbend lathe. Below is the original description and pictures of this item from Micro Mark. This unit retails at $858 shipped. This unit was bought new from Micro Mark about 3 years ago; they still sell this same model. The variable speed is awesome and gets to super high RPMS. I never went past the 1-2 o'clock ... moreposition much. The 7 x 16 is much bigger then the 10 or 12 and gives you much more space. It goes forward& reverse. Since this unit is heavy it will ship ground insured mail and will be very well packed. Now 16 inch capacity More powerful 500 watt brushless motor Quieter belt drive The MicroLux 7 x 16 Mini Lathe is not just a stretched version of older 7 x 10 and 7 x 12 mini lathes. But has new design elements required for bigger jobs: A more massive bedway to withstand extra forces generated by turning long pieces A more powerful motor Carefully positioned controls for easy access and safety A specially configured and strengthened tailstock to accommodate long workpieces, Careful workmanship gives you high dimensional accuracy and long life. And smooth operation lets you put fine finishes on turnings up to 7 inches in diameter and 16 inches long. Yet, it's compact enough(just 86 pounds) to be portable. This mini lathe has true imperial(inch) feed screws and dials(050 inch per turn) so metric conversions are not required. The MicroLux 7 x 16 Mini Lathe is so versatile it will cut all metals, including carbon steel, stainless steel, cast iron, aluminum, brass, co
Excellent Condition- Original South Bend thread indicator dial with mounting screw for a 9" or 10K South Bend lathe. Indicator is sharp and legible. Portion of South Bend label remains on cast. As shown. Gear is stamped TD101. In excellent condition, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
This chuck is marked Goodell Pratt Co. Tool Smiths Greenwald Mass. U.S.A. The jaws move smooth. But this tool has been abused. I have no way to check accuracy, and am selling it as is with no returns. No shipping outside of the United States.
For sale is a set of left over carbide inserts. Some of them are used. Some are new, all have at least one good edge, most have all good edges. See the photos for the variety that you will be getting. These are used/unused stock out of package. Therefore sold with no returns.
The following auction is for a Craftsman Atlas Metal Lathe Milling Machining Compound Table Base W68-1 W68-2 W68-5 It is in fine condition with some wear. In fine working condition. Marked W68-1 W68-2 W68-5. It has some light surface rust and oxidation in places. The 2 top holders that go on top of the table are custom made and work fine. See pictures. Sold as pictured. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays for calculated USPS Parcel Post Mail shipping with Delivery Confirmation within the United States. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
This is an old and ready to use inner gear guard which likely originally came with an At;as/Craftsman 10 or possibly 12" metal lathe. It has most of the original paint and it is basically ready to use. On the side it shows 9-152. This is one of many lathe parts I am having up for auction therefore if you are the winning bidder on multiple items and they are shipped together I will gladly combine shipping to save you money. If you have any questions please ask before bidding. I will ship to continental US(lower 48 states only. Will ship to Hawaii and Alaska using USPS) You may want to keep me on watch for a while because I will be listing several tool and related items for auction. Thanks for looking and good luck bidding.
For your consideration is a vintage Jacobs chuck 1/2" x 1/8" and it fits 1/2-20 Shaft size. Seems to be in decent shape. It has a nice patina. Check my other listings I have a huge inventory of NOS and used vintage automobile parts and accessories! If you have any questions please ask. Thanks for looking. Terms and conditions: All items are sold as-is.We do our best to describe items as accuretly as possible. If you have any questions please ask! All shipping has delivery confirmation, and over 250.00, signature confirmation. I don't include insurance, if you need it let me know. International shipping is extra, and I will not lower the price on customs forms! All international shipping is sent Priority USPS.
Chuck came from small Ma& Pa shop. he made tool and die parts for Boeing. i purchased the shop and got excellent quality tooling from it for my own use and re-sale. I have no need for it as i have no back plate for my machinery. chuck will be packaged up and a rust inhibitor will be sprayed on it for corrosion prevention. It comes off easy with a de-greaser.
Very Nice- Complete Original South Bend telescoping steady rest for a South Bend 9" lathe. Jaws move smoothly throughout range. Original knurled thumb screws function as they should. All three jaws are in excellent condition. Castings are stamped PT115N1 and PT116NR1. Base is stamped SRD101N. Very nice unit, in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
DESCRIPTION: PICK UP IS AVAILABLE.USED. SELLING AS PARTS. EMCO COMPACT 5 CNC METAL LATHE. I DID NOT FIND THE CONTROL BOARDS FOR IT SO I CAN NOT RUN THE LATHE. IT HAS A 3 JAW; 3 1/8 CHUCK; TOOL POST BLOCK WITH CUTOFF BLADE BLOCK; TAILSTOCK AND CORDS. THE MACHINE FOOTPRINT IS ABOUT 32 1/2 X 24 APPROX. LOOK AT THE PICTURES. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED ... moreIN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below va
Original J.H Williams Straight Tuning Toolholder for metal lathe. Measures 3 5/8" shank x 3/8" wide x 7/8" high. Marked with"J.H. Williams USA" on one side and on the other side"TH-0-S" Will always combine shipping when possible. Any questions feel free to e-mail. Powered by The free listing tool. List your items fast and easy and manage your active items.
See pics of what you will receive! Die holder. Handle, tap adapter/tap, storage box. Posted with
This Flather metal lathe dates from the early1900's. The owner of this lathe says it belonged to her grandfather. A master machinist from Piedmont, Alabama who did machine work for local cotton gins in the first half of the 20th century. It is thought that this Flather lathe was purchased new to replace an 1880 Putnam lathe(which is still in the family) Her husband, an engineer, moved both lathes to his workshop where they were cleaned and reassembled. The Flather is connected to power; has a bed length of approximately 74" and probably weighs close to 2,000 pounds.but that's just a guess. It has a large 4-jaw chuck and and a large selection of accessories- electric motor included. I possess very limited knowledge of lathes or their operation; therefore, I'm unsure of just how complete this machine is, or even it's proper ... moreidentification. The lathe is located in Huntsville, Al and will have to be removed by the purchaser from it's current setup. The machine is also being offered on another venue and is subject to being removed at any time. I'll strive to answer any question. But as I said, I have limited knowledge and the machine in not at my location, thereby making it difficult to go have a look. If you would like to talk directly, just request it and I will provide a phone number. Additional pictures might take several days. The ultimate goal of the family is for this machine to find a good home; therefore. They will consider making a donation of the lath to a museum or other preservation organization. Flather& Company lathes were begun in Nashua. NH about 1875 and continued through the late 1920's. Joseph Flather died in 1907 with the business being continued on for a few more years by his sons. The depression caused the demise of the Flather Company although they did languish on a bit during the 1920's under the less disciplined guidance of the sons. Much more information on Flather Company can be found on the web)
DESCRIPTION: USED. AUDELS MACHINIST BOOK. IT LOOKS GOOD. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;VINT
This is a nice used gear with plenty of use left. No shipping outside of the United States.
The following auction is for a South Bend 9" Metal Lathe Compound Assembly It is in good condition with wear. In good working condition. Has a piece missing where the tool holder would go. Still workable. See pictures. It has some surface rust and oxidation in places. It is o ff of a South Bend 9" Metal Lathe Sold as pictured. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 1 3.00 for USPS Priority Mail shipping with Delivery Confirmation within the United States. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
Was claeaning out a home machine shop. And found these. They appear to be a matched pair, and only markings I can see are"H1" embossed on them. I am told they are either part of a countershaft for a lathe, possiblt south bend. Another guess is they are for a jack shaft like the type used in old shops where one motor was used to run several machines. If you have a use for them, please buy them. I'd hate to see them end up at a scrap yard. They are a little heavy, but I can ship, or local pickup is available. I'll try to get some dimensions posted. Also, I am on vacation from August 18th to the 22nd, so there will most likely be a delay in shipping. On Aug-12-13 at 18:22:11 PDT. Seller added the following information: The bore diameter is 0.750"
For sale is a Craftsman Model 109 Lathe drive lead screw. Its overall length is 31 inches. Looks like there is a 3/4" step at the end where the pulley goes. This diameter is.375" the main shaft is 1/2" diameter. This should work fine, it worked fine on the lathe it was on, should work with the step in the end of the shaft, or you can easily make a spacer to make the entire shaft the same length. This part is used and about 70 years old so expect them to have a couple signs of wear.
Atlas 10100 6" Metal Lathe 10114 Gearsette w/ Change Gears 56 44 32 24 MK2 3950 MKII 101 The change gear teeth are in fine condition with some small wear. The gear teeth count/part numbers are as follows M6-101-56. M6-101-44, M6-101-32, M6-101-24. The Gearsette also includes a Compound Gear Bushing. Change Gear Sleeve, Feed Unit Chart, Change Gear Plate. Covers.0048. 0055, 0064 Feeds. Comes with instruction and part sheet. From a Atlas Model 10100 6" Metal Lathe See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 12.0 0 for USPS Priority Mail with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. ... moreE-mail me with any questions. Posted with
Atlas 10100 6" Metal Lathe 10112 Gearsette w/ Change Gears M6-101-64 MK2 3950 MKII 101 618 The change gear teeth are in fine condition with some small wear. The gear teeth count/part numbers are as follows M6-101-64. M6-101-64. The Gearsette also includes a Compound Gear Bushing. Change Gear Stud Sleeve, Thread Unit Chart. Covers a range of threads including 16. 18, 20, 22, 24, 27, 28, 32 Threads/Inch. Comes with instruction and part sheet. From a Atlas Model 10100 6" Metal Lathe See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 12.0 0 for USPS Priority Mail with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank ... moreyou for looking. E-mail me with any questions. Posted with
Nice- Original South Bend bull gear for a 9" or 10K South Bend lathe. Bore diameter 1 5/8" 4 7/8" OD. S pring is present. Still retaining original paint. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1407f708aee-0x109-
We Have Thousands Of Machine Manuals. Instruction Manuals. Machinery Maintenance Manuals. Parts list. Service Manuals. Machinery Brochures And Schematics For Sale. We Are Proud To Provide Service To The Metalworking. Chip Making and Fabricating Machine Tool Manual Needs. We Take Great Pride In Getting You The Correct Manual For Your Machine. Let Us know Your Serial Number. And Model Number. We Guarantee That We Will Get You a Correct Manual or Your Money Back! Each Manual Is Comb Bound For Easy Reading On A Flat Surface Such As a Table or Workbench. We Have Collected These Manuals Over Many Years And Continue To Look For More Every Day. Our Customers Have Been Pleased With Our Manuals. Schematics, Parts List, Service Manuals, Maintenance Manuals, Instructions Manuals And Brochures. They Are Filled With Invaluable Information, Sometimes Not ... moreEven Available Direct From The Manufacturer. We Are Often The Last Resort. We Take Pride In This Fact. We Are Here To Fulfill Your Industrial Machinery Manual Needs Today. Email Us Today! Industrial Machinery Manuals Is Proud To Offer 1 Quality Manual: Oliver No. 2059. Metal Spinning Lathe Specs& Drawings Manual Year(1961) This Manual Covers Models: No. 2059#2059 This Manual Includes: Repair Parts Order Data Machine Lubrication Data Lubricant Specifications 92” Diameter Swing 30” Between Centers Dimensional Drawings. Full Size Hydraulic Brake Assembly Floor Plate Drawing Hold Down Assembly 1 ½” Floor Plan Compound Spinning Tool and Drawing This Manual Has 21 Printed Pages. Year 1961 Complete Manual“For Sale” We Ship Domestically via USPS First Class or Priority Mail ABSOLUTELY FREE! Delivery Time Usually 1-5 Days. If You Need a Product Faster. Please View The Shipping Calculator Below For Options. Other Options: UPS Overnight Next Day Air. UPS 2 nd Day Air. We Ship Internationally Only To Canada And Mexico. $8.00 S& H Fee Applies To International Shipping. All other international shipping must be done via Email PDF. I ACCEPT PAYPAL. CASHIERS CHECK, WIRE TRAN
good used lathe thread dial mfg unknown will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
Original 40 tooth change gear for a 9" or 10K South Bend lathe. Single keyed 9/16" bore. 2 5/16" outer diameter, 3/8" thick. In good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Original 56 tooth change gear for a 9" or 10K South Bend lathe. Single keyed 9/16" bore. 3 1/4" outer diameter, 3/8" thick. In good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Atlas or Craftsman 12” Metal Lathe Tailstock Assembly# 990-289(Casting# 831-002) This is a fully functioning tailstock assembly from a Craftsman 12” lathe. Model# 101.28940. I have disassembled, cleaned, reassembled, and checked this tailstock. It should be good to go. If you go to Sears Parts Direct you will see that many parts are still available for this item. And that they are charging as much for the handwheel as the“Buy It Now” price I have listed for the whole tailstock. This is a no reserve auction. This item is sold as is. Shipping $16.85.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-140873a318b-0x101-
This mini lathe I purchased back in 2008 to make scale model cannons and did so for nearly 4 years until I started to make them bigger and wanted an even larger metal lathe. This machine is in perfect working order and only shows slight cosmetic wear on a few of the parts from use. I highly enjoyed using this lathe for years to make my models and you will too! I will not ship out of the country including Alaska and Hawai'i.
Here is a precision ROEM drill chuck with a drill capacity from 1/8" to 5/8" It is adapted to a No 6 Jacob Taper. Excellent functional a must for your precision lathe work.
This Sale is for an EXCELLENT condition CLAUSING LATHE USA. 6300 series 12" CENTER REST. This centerrest. And the follow rest that I have in another auction, spent 99.9% of it's life in a storage drawer. Please see photographs for more detail on condition and size. Shipping by USPS Priority mail
Up for bids is a Smith and Mills 12 inch shaper. I bought this machine a couple of weeks ago at a local sale from a gentleman who had owned this shaper for many years. What I know about it was told to me by him. Although it is in need of new paint. This machine works well. It turns easily by hand without noise or roughness. The original input shaft and bracket has been replaced and it is now driven by an Orbmark hydraulic motor. This shaft also has a two grooved sheave installed on it for use with an electric motor. He also installed an internal pillow block bearing on the outboard end of the shaft for additional support. This bearing is shown in a photo. There is no looseness in the drive gears; it turns very, very smoothly. The original shaft and bracket(no pulley) is undamaged and included in this auction. The original shaft/bracket, tool ... moreholders and tooling is shown in a photo. I have not seen it run at speed as I don't have access to hydraulics. Click on the main image for a super sized shot with zoom capabilities for all images. The shaper comes with the original vise which measures nine inches across. It swivels by loosening a nut on the underneath side. It sits on a thick. Brass plate that is inscribed with scaled markings. The vise is in great shape, the jaws are undamaged and it operates freely and smoothly. I turned it easily just using my fingers. The machine is roughly 46 inches tall and 33 inches in depth. It is believed it to weigh around 1000 pounds. There are two welded repairs at floor level on the base of the machine. Both look to be about 2-3 inches long. One is on a corner and the other about 12 inches down the side. Neither is showing additional cracking. I took photos of each repaired spot. The machine is anchored to some cribbing by lag bolts in order to raise it to a working height. I don't know anything about metal working machines but the man showed me how it operates by turning it manually. Everything worked as it should with the head reciprocating and the ratcheting arm advanc
lot of 5 good used carbide tipped cutting bits mfg unknown approx 3/8" x 15/16" x 6 1/2" will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a Medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
GENUINE SCHAUBLIN MODEL SV 70/ 102 METAL LATHE ADJUSTABLE TOOL PO