In 
 
Order by: 
Available to: 
Price: 
 - 
$
28.49
Buy It Now
$12.57 Shipping
Condition: Used
Location: Sunman, United States
Auction is for 4 unused Burns Engineering Model S65-10A0525-14ST15 Temperature Probes. Posted with
$
75.99
Buy It Now
$10.94 Shipping
Condition: New – Open box
Location: Sunman, United States
Our MAF sensors feature fast response, typically less than 15 milliseconds to 90 percent of flow change, for outstanding performance over a wide range ... moreof ambient temperatures. AF Series Part Numbers.
$
389.06
Buy It Now
Free Shipping
Condition: New
Location: China
During the test, the object to be tested is sandwiched between the main machine and the auxiliary machine, aiming at the laser target, and the test result ... morewill be displayed on the main machine screen.
$
14.01
Buy It Now
Free Shipping
Condition: New
Location: China
The depth of the tapping must exceed the installation length of the thread inserts. After tapping, use a compressed air spray gun to blow out the debris. ... moreWhen the thread accuracy is high, check the tapped bottom hole with a special bottom hole plug gauge for wire thread inserts.
$
24.99
Buy It Now
$4.50 Shipping
Condition: Used
Location: Marengo, United States
$
194.11
Buy It Now
Free Shipping
Condition: New
Location: United States
Read more Upgraded Version Sold Since November 2018 We have rethought the product design. The surface of the valve body is coated with an anti-oxidation ... morelayer that makes it durable. Besides, we have doubled the cost to upgrade PVC hose to PRO threaded vacuum hose.,etc.
$
75.00
8d 14h 41m 17s
0 bids
$16.10 Shipping
Condition: Used
Location: Salem, United States
This is a good part that I bought to fix my 6hp but it is to large so it is for a larger engine. It has very little wear. would work fine as is. it is ... moreiron. the thumb screw is not stuck.
$
57.95
Buy It Now
Condition: For parts or not working
Location: Holgate, United States
Part No E5556F. Here is an original head for a Stover KE hit and miss engine. It is in nice shape but it has a old braze repair. Missing the intake valve ... morespring and keeper. The valves look and feel good Check out the pictures and see if you need it.
$
7.98
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Brought to you by Ebay's largest seller of NEW. Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being ... morespent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines. We have a large selection of in stock parts and also custom build anything you might need. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Call(712) 490-5596 today and see what we can do to help you. Thanks for looking Zach. Part: Briggs Engine Decal Condition: New. Description: This Red. Black, and Yellow Briggs decal set is the highest quality you will find on eBay for your engine. Our decals are MADE IN THE USA with a high quality material to withstand many years of being on your engine. Decal measures 2.75 by 4.75 inches. Used on all F series engines. Including the FH& FI, Also used on the following models: Y M H Z ZZ A B T Aproximate years of 1920 till 1948 Made to look just like the old screen printed decals No water mess to apply. Just peel off and stick on. Guaranteed! If your not happy you get your money back! If you ruin a decal your installing you get another for FREE! These decals look just as nice and BETTER than the water decals! Don't believe me? Call me and I will send you a FREE SAMPLE! Questions? Call 712-490-5596. Thanks. Zach Warrantee: I dont warrantee any of my parts per say. Warrantee's run out and expire! What I want is to personally make sure that the item you purchase from me is what you need and works like it is intended to! If that means money back on some items or fixing it or sending you a different item. That is what I want todo. I dont offer a return policy, I offer my word to make you a happy and repeat costumer! Face it, These are OLD engines and not every one is the same. What works on one might not work on another. So
$
26.67
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
$
62.50
Buy It Now
Condition: Used
Location: Sherwood, United States
It has 3/8” NPT thread. This does not have a vent tube or check ball. The side pump is a wood handle.
$
385.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Sleepy Eye, United States
$
45.95
Buy It Now
Free Shipping
Condition: Used
Location: Holgate, United States
Check out the pictures and see if you need it. I am a real person who is easy to find. The mounting holes are about 2-15/16" x 2" apart on center from ... moreeach other.
$
100.36
Buy It Now
$125.00 Shipping
Condition: Used
Location: Bicutan Western, Philippines
Tested and works good BUT shows some rubs and light scratching on the Top Chassis and"computer" button N.G. Power cord included. Thank you for ... morelooking!
$
78.99
Buy It Now
Free Shipping
Condition: New
Location: Prospect, United States
3x Bosch NKLT14 Nailkiller Daredevil Auger Bit 7/8" x 17-1/2". Wider flutes engineered for better chip removal. Product Type: Auger Bit. Bit Type: Auger. ... moreHex shank power groove improves bit stability and reduces slippage.
$
116.49
Buy It Now
Free Shipping
Condition: New
Location: Prospect, United States
5x Bosch NKLT14 Nailkiller Daredevil Auger Bit 7/8" x 17-1/2". Wider flutes engineered for better chip removal. Bit Type: Auger. Product Type: Auger Bit. ... moreHex shank power groove improves bit stability and reduces slippage.
$
97.99
Buy It Now
Free Shipping
Condition: New
Location: Prospect, United States
4x Bosch NKLT14 Nailkiller Daredevil Auger Bit 7/8" x 17-1/2". Wider flutes engineered for better chip removal. Product Type: Auger Bit. Bit Type: Auger. ... moreHex shank power groove improves bit stability and reduces slippage.
$
12.93
Buy It Now
Free Shipping
Condition: New
Location: China
(20Pcs M6x1mm Brass Grease Oil Cup Oiler Spring Flip Cap for Hit Miss Engine. Item included: 20 x oiler spring flip cap. Suitable for: Hit Miss Engine. ... more6) Applied: Hit Miss Engine, Grease fitting. 2) Color may vary slightly due to the color setting of each individual monitor.
$
249.59
Buy It Now
Free Shipping
Condition: New
Location: Prospect, United States
12x Bosch NKLT14 Nailkiller Daredevil Auger Bit 7/8" x 17-1/2". Wider flutes engineered for better chip removal. Product Type: Auger Bit. Bit Type: Auger. ... moreHex shank power groove improves bit stability and reduces slippage.
$
7.77
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Black Cloth Covered Solid Core 2Ft. Solid copper conductor wrapped in period correct cloth jacket.
$
26.00
Buy It Now
$18.30 Shipping
Condition: Used
Location: Wauseon, United States
Center hole Approx 13/16". base to center of hole is 1 3/16. very good condition.
$
34.99
Buy It Now
$6.00 Shipping
Condition: Used
Location: Orient, United States
There is a crack in the brass near the left side mounting hole - see photos. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. ... moreI apologize for any inconvenience. Condition:Due to age this item is being sold "AS IS".
$
10.61
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
$
78.00
Buy It Now
$18.00 Shipping
Condition: Used
Location: Elizabethtown, United States
This governor is very good condition. It does not show wear. Gear is marked ZBA28A. The main bracket is marked ZBA37A. Any item over $30.00 must be insured. ... moreThe items that I am selling are old and I will describe them to the best of my ability. If you have any question please ask before bidding. Whenever possible I will ship in a flat rate box.
$
40.00
Buy It Now
$16.10 Shipping
Condition: Used
Location: Sherwood, United States
For your consideration is an original International Harvester, IHC, McCormick Deering 1-1/2hp M Carburetor body only, with the choke plate. This is for ... morethe ignitor style engines. This would use 2 needle valves and a lever on top for the fuel position of “start”, “Drain” and “run”.
$
99.95
Buy It Now
Condition: For parts or not working
Location: Holgate, United States
Part No. 303K11. This is a Webster igniter bracket for a Field Brundage or Sattley engine. It is stuck and looks like its been repaired 100 years ago. ... moreCheck out the pictures and see if you need it.
$
29.00
Buy It Now
$5.30 Shipping
Condition: Used
Location: Swartz Creek, United States
You’ll love it! Massey-Harris LTD Toronto Canada. Blank number fields for you to custom stamp. Even as a reproduction, it is rare. Don't miss out! I will ... moreget back to you. It's details appear to photo etched, rather than stamped.
$
22.26
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Brought to you by Ebay's largest seller of NEW. Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being ... morespent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines. We have a large selection of in stock parts and also custom build anything you might need. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Call(712) 490-5596 today and see what we can do to help you. Thanks for looking Zach Part: Your choice- ONE of three types shown- brass primer cups. Condition: New. Description: Very nice straight brass reproduction primer cups for your hit& miss gas engine. Available in three variations. This listing is for one of the three in the picture. Please specify in a message to seller when paying. Which size you would want. Size#1 w/ 1/8 inch pipe threads(Measures 2 inches tall. Bowl is 11/16 inside) Size#1 with 1/4 inch pipe threads(Measures 2 inches tall. Bowl is 11/16 inside) Size#2 with 1/4 inch pipe thread. Measures 2.375 inches tall. Bowl is 3/4 inside) Primer cup number two is on the left hand side of the picture. Primer cup number one is the middle and right hand side of the picture. This listing is for only ONE of the three primer cups pictured. Please indicate which of the three you would like upon checking out. Questions? Call 712-490-5596 Thanks. Zach Warrantee: I dont warrantee any of my parts per say. Warrantee's run out and expire! What I want is to personally make sure that the item you purchase from me is what you need and works like it is intended to! If that means money back on some items or fixing it or sending you a different item. That is what I want todo. I dont offer a return policy, I offer my word to make you a happy and repeat costumer! Face it, These are OLD engines and not every one is the same. Wha
$
54.99
Buy It Now
$20.35 Shipping
Condition: Used
Location: Orient, United States
Detent Arm Associated / United Chore Boy. Associated / United Chore Boy. Detent Arm is in good condition and ready to use. I have been collecting hit ... moremiss engines for 35+ years and I am very knowledgeable.
$
569.99
Buy It Now
Free Shipping
Condition: Used
Location: Baldwin, United States
Of Indianapolis Indiana USA. Type "M" No.1156 This Looks Like It Should Go On The Front Of A Big Engine such as An IHC Mogul Or Another type of Side shaft ... moreBut Have Not Been Able to Positively Identify it As of Yet.
$
173.99
Buy It Now
Free Shipping
Condition: New
Location: Prospect, United States
8x Bosch NKLT14 Nailkiller Daredevil Auger Bit 7/8" x 17-1/2". Wider flutes engineered for better chip removal. Bit Type: Auger. Product Type: Auger Bit. ... moreHex shank power groove improves bit stability and reduces slippage.
$
148.75
Buy It Now
Free Shipping
Condition: Used
Location: Mesa, United States
(Typically we have one hit wonders and the product listed is the actual product you will receive. 2) Electronics of an analog nature and/or more than ... more5 years old typically require opening and cleaning.
$
80.00
Buy It Now
$16.10 Shipping
Condition: Used
Location: Sherwood, United States
The catch pawl is not spring loaded as it should be. The depth is about 4-3/4”.
$
129.99
Buy It Now
$16.10 Shipping
Condition: Used
Location: Orient, United States
Large IHC Brass Cylinder Oiler for Hit Miss Engine. Oiler is in good condition and ready to use. I have been collecting hit miss engines for 35+ years ... moreand I am very knowledgeable. Bottom brass piece has been replaced.
$
47.78
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Brought to you by Ebay's largest seller of NEW. Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being ... morespent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines. We have a large selection of in stock parts and also custom build anything you might need. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Call(712) 490-5596 today and see what we can do to help you. Thanks for looking Zach. Part: John Lauson Muffler& More 1 inch thread. Description: A brand new muffler for John Lauson engines. Muffler has 1 inch NPT threads. Will fit lots of other engines as well and works great on many models. Measures 5.75 inches across 3.5 inches thick. A really nice muffler and super nice quality! Please check your thread size before ordering. If you want this muffler in a different size. Please contact us. Questions? Call 712-490-5596 Thanks. Zach Warrantee: I don't warrantee any of my parts per say. Warrantee's run out and expire! What I want is to personally make sure that the item you purchase from me is what you need and works like it is intended to! If that means money back on some items or fixing it or sending you a different item. That is what I want to do. I don't offer a return policy, I offer my word to make you a happy and repeat costumer! Face it, These are OLD engines and not every one is the same. What works on one might not work on another. So with that in mind we will do what it takes to fix your engine and make you happy! No one else on Ebay with Maytag parts says that. BUT That is what I will do! You have my word! Powered by The free listing tool. List your items fast and easy and manage your active items.
$
12.00
Buy It Now
Condition: New – Open box
Location: Baldwin, United States
Part Number GM1982. Without These washers On Each side of the wheel There Is Nothing To Keep The wheel Tight & From Damaging The Pins Holding The wheel ... moreIn Place. This is 2" OD 1 1/4" ID to Fit Up To A 1 1/4" Axel Shaft.
$
18.27
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Check valve rebuild kit for the Fairbanks Morse 1.5-2 hp Z & ZD engines. These are made just like the original with the screen held in place with tabs.
$
8.93
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
$
148.75
Buy It Now
Free Shipping
Condition: Used
Location: Mesa, United States
(Typically we have one hit wonders and the product listed is the actual product you will receive. 2) Electronics of an analog nature and/or more than ... more5 years old typically require opening and cleaning.
$
289.07
Buy It Now
Free Shipping
Condition: New
Location: United States
Four corner cover soft protection, safe your ankle and extend the service life of board. Double baffle provide more stable support.
$
25.00
Buy It Now
$12.45 Shipping
Condition: Used
Location: Onaga, United States
Fairbanks Morse 3 HP intake valve spring. Ask em. if you got em.USA sales only,Yes I'll combine shipping,Thanks for looking
$
30.00
Buy It Now
$15.40 Shipping
Condition: Used
Location: Elizabethtown, United States
Good condition. 9" overall length.
$
89.99
Buy It Now
$15.40 Shipping
Condition: Used
Location: Orient, United States
Pulley for John Deere E Hit Miss Engine. Original stamped steel pulley with mounting bolts and nuts. Pulley in good condition ready to use. I have been ... morecollecting hit miss engines for 35+ years and I am very knowledgeable.
$
14.91
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Brought to you by Ebay's largest seller of NEW. Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being ... morespent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines. We have a large selection of in stock parts and also custom build anything you might need. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Call(712) 490-5596 today and see what we can do to help you. Thanks for looking Zach Part: Stover Engine Manual Condition: New Description: This is a great reprinted book/manual for the Stover engines. Covers most/all engines 1.5hp to 60hp both throttle governed and hit& miss. Its a larger print book measuring 8.5 by 11 inches. When we got this book to reprint it was a mess. We got it cleaned up pretty well. Its not perfect but its very readable and the larger print helps a lot. It covers a lot of stuff on lots of Stover engines. As well as Mags for them. A good read and 28 pages. br Questions? Call 712-490-5596 Thanks. Zach Warrantee: I don't warrantee any of my parts per say. Warrantee's run out and expire! What I want is to personally make sure that the item you purchase from me is what you need and works like it is intended to! If that means money back on some items or fixing it or sending you a different item. That is what I want to do. I don't offer a return policy, I offer my word to make you a happy and repeat costumer! Face it, These are OLD engines and not every one is the same. What works on one might not work on another. So with that in mind we will do what it takes to fix your engine and make you happy! No one else on Ebay with Maytag parts says that. BUT That is what I will do! You have my word! Posted with;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e811e5545-0xff-
$
1749.95
Buy It Now
Condition: Used
Location: Waldo, United States
This is a very large and impressive 2 1/2" Gardner steam engine governor. It could also work for a large gas engine. It is in excellent, used condition ... morejust as found from an old collector's estate.
$
249.50
Buy It Now
$8.95 Shipping
Condition: Used
Location: Prescott, United States
Antique J H Wilkinsons brass Engine Oiler Pat. May 28, 1872 Faceted Glass Hit Miss. 2 chips in glass, 1/4” NPT mount. See photos as they are of the item ... moreyou will receive. Ask any questions you. Thanks for looking!
$
59.99
Buy It Now
$12.65 Shipping
Condition: Used
Location: Orient, United States
Brass Oiler #550. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. I apologize for any inconvenience. Condition:Due ... moreto age this item is being sold "AS IS". All the images are original scans of the actual item being sold.
$
95.00
Buy It Now
$15.50 Shipping
Condition: Used
Location: Lockridge, United States
I’m no expert on the whine glass oilers, I can’t say I have ever seen one quite like this one, maybe part of it is home made? Glass is good, no name, ... moreI believe it’s missing some parts so see pictures for best description. Comes with the little display base. Antique Brass Whine Glass Oiler Hit Miss Steam Engine No Name. Condition is "Used". Shipped with USPS Priority Mail.
$
22.05
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Made from an original to the original specs.Long needle is starting fuel, left side as you face head of engine. Short needle is fuel from the tank below, ... moreright hand side as you face head of engine.
$
74.99
4d 1h 22m 16s
0 bids
$18.00 Shipping
Condition: Used
Location: Saint Helens, United States
Has make shift finger as seen. Gear turns, weights and adjuster stuck. dirt, grease, oil due to age.
$
16.75
Buy It Now
Free Shipping
Condition: New
Location: Warren, United States
Hit & Miss Engine Trip lever for Webster M-MM-K and L magnetos.Precision Water jet cut. Will Last Forever. Webster is cut into the handle. So there's ... moreno mistake what it is for. Will work on all engines with Webster mags but, Best for Bump starting the larger engines.
$
4.73
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Brought to you by Ebay's largest seller of NEW. Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being ... morespent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines. We have a large selection of in stock parts and also custom build anything you might need. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Call(712) 490-5596 today and see what we can do to help you. Thanks for looking Zach. Part: Gib Head Shaft Key- 1/4 x 3. Condition: New. Description: Brand new made in the USA gib head style shaft key for your stationary motor. Size is 1/4 inch x 3 inch. Questions? Call 712-490-5596 Thanks. Zach Warrantee: I dont warrantee any of my parts per say. Warrantee's run out and expire! What I want is to personally make sure that the item you purchase from me is what you need and works like it is intended to! If that means money back on some items or fixing it or sending you a different item. That is what I want todo. I dont offer a return policy, I offer my word to make you a happy and repeat costumer! Face it, These are OLD engines and not every one is the same. What works on one might not work on another. So with that in mind we will do what it takes to fix your engine and make you happy! No one else on Ebay with Maytag parts says that. BUT That is what I will do! You have my word! Powered by The free listing tool. List your items fast and easy and manage your active items.
$
15.00
Buy It Now
$19.10 Shipping
Condition: Used
Location: Onaga, United States
It has part #3K6 cast on it. No cracks welds or repairs. See Photos!
$
7.98
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
This yield tooth spring is perfect to replace your broken, rusty or missing spring.
$
15.12
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Brought to you by Ebay's largest seller of NEW. Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being ... morespent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines. We have a large selection of in stock parts and also custom build anything you might need. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Call(712) 490-5596 today and see what we can do to help you. Thanks for looking Zach Part: Instructions for Rife Hydraulic Ram. Condition: Reprint. Description: Very neat booklet covering the water supply of towns. Villages, estates and more with use of the water powered Rife Hydraulic Ram. Simply put this is a water powered pump. Simple in design these little units worked wonders for people in years gone by and some are even still in use today. A great read with lots of info. 28 pages and measures 5.5 by 8.5. Well put together and covers a lot of material. Questions? Call(712) 490-5596 Warrantee: I dont warrantee any of my parts per say. Warrantee's run out and expire! What I want is to personally make sure that the item you purchase from me is what you need and works like it is intended to! If that means money back on some items or fixing it or sending you a different item. That is what I want todo. I dont offer a return policy, I offer my word to make you a happy and repeat costumer! Face it, These are OLD engines and not every one is the same. What works on one might not work on another. So with that in mind we will do what it takes to fix your engine and make you happy! No one else on Ebay with Maytag parts says that. BUT That is what I will do! You have my word! Powered by The free listing tool. List your items fast and easy and manage your active items.
$
27.20
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
If there is any other parts you are looking for and you don't see, give us a call and we might be able to help you out.
$
69.99
Buy It Now
$10.15 Shipping
Condition: Used
Location: Orient, United States
I have been collecting hit miss engines for 35+ years and I am very knowledgeable. I apologize for any inconvenience. If you decide you don't want it ... moreor find another one cheaper, I won't take it back.
$
41.79
Buy It Now
$9.12 Shipping
Condition: Seller refurbished
Location: Le Mars, United States
Bead blasted, clean and no cracks breaks, welds or other repairs. Great condition.
$
161.49
Buy It Now
Free Shipping
Condition: New
Location: Mesa, United States
(Typically we have one hit wonders and the product listed is the actual product you will receive. 2) Electronics of an analog nature and/or more than ... more5 years old typically require opening and cleaning.
$
389.05
Buy It Now
Free Shipping
Condition: New
Location: China
During the test, the object to be tested is sandwiched between the main machine and the auxiliary machine, aiming at the laser target, and the test result ... morewill be displayed on the main machine screen.
 In 

Past Items  
 
I have for you r consideration a Reproduction NOVO Hit MISS Gas Engine Inspection Cover. This is a quality CAST IRON cover. The casting# 112S70 is casted on the rear of the door. All you need to do is drill the two 3/8" holes and install. Safe the trip to the foundry. Delivery to WI shows or any large shows I attend is always free. Delivery to lar ge shows I may NOT attend is an option. But there will be a fee. If you have any questions or want to chat about this fine quality piece please call Justin 920-344-8077 Thanks JUSTIN WENDORFF 1051 WILLOW ST. LOMIRA. WI 53048 PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery ... moreconfirmation. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there is an error in my listing, not a change of heart on your part. With that said, I uphold a 100% feedback rating and do everything I can to maintain that status. So bid high and bid often. GOOD LUCK AND HAPPY BIDDING!
You are buying EIGHTEEN(18) issues of The Gas Engine Magazine(6 bi-monthly issues per year) for the years 1968 1969 1970 COMPLETE in very good condition
Here is a GAS ENGINE TRADEMARKS by C.H. Wendel. This is a new book. I was lucky enough to get a number of these brand new still in the plastic wrapper. It has many pictures of trademarks and logos that were used by the engine manufactures. This is a nice hard cover book. It will make a nice addition to anyone's antique gas engine reference library. 8-3/4" x 11-1/4" 176 Pages Long, Dated 1995, Brand New, If you pick this part up at my house 7% sales tax will be added to the purchase price. If it is shipped or delivered out of state then there will be no sales tax. If you have the proper exemptions then also there would be no sales tax. My handling time is set at 5 business days after recieving payment. Most items will go out faster though. If you have any questions give me a call 419-789-1159 The Fine Print. I am happy to be ... moreselling another winter season on ebay. I have many good parts and pieces I will be listing in the next few months. I try to do a very good job of listing everything I sell in a very accurate manner to explain all the good and bad points with the pictures and in the description. Please feel free to ask any and all questions. I will even answer questions that are already answered in the description although your intelligence may be questioned: I am 100% certain that no one needs any of the items I sell to meet any basic needs of life. With that said I am selling these items for the money and if you cannot pay, think you might not be able to pay, or do not want to pay please bid on items owned by someone else. Some basic excuses for not paying are; someone getting pregnant, someone dying, losing a job, wife losing a job, getting a divorce, termites, fires, alcoholism, drug addiction, using the money for another purchase, and just being a looser. I am sure there are other excuses also but I don't care and don't want to hear them. I have no interest in any bidders personal problems, talk to your pastor or therapist if you need help. So if someone doesn't pay I will ban the
This is an original Penberthy steam injector. It is in good condition and is number BB21(STK154) This could be the piece you've been looking for or are missing for your project! Not all of the parts are included with it. But they are available out there. You won't want to miss out on it. The pictures tell the story. Good luck.
This is an original Chicago steam injector. It is in good condition and is a 1" This could be the piece you've been looking for or are missing for your project! Not all of the parts are included with it. But they are available out there. You won't want to miss out on it. The pictures tell the story. Good luck.
United Hit and Miss Engine. 2 HP, Model A I purchased this in 1996. It worked fine, but I wanted to restore it. I have always restored old tractors. I took it apart, had it sand blasted, I primed and painted it and the parts. Never got around to putting it back together. Got busy doing other things and I am cleaning out the shop now where it has been stored and want the space. It has been in a dry environment and covered, but it has gotten dirty through all these years because I pretty much deserted my shop and let it go. Now I am ready to reclaim it! I cleaned on the engine a bit, but it will need a good cleaning. It wipes off real easy, I just didn't have the time before I had to leave for work. The parts have been stored in a box, so they look pretty clean. It is on Walnut Skids with a homemade Walnut Pulley. The Head has been bored ... moreand sleeved by professional motor builders. Has new rings. I have new United Stickers for it. As well as I remember, everything is all there. The pictures are as well as I could get back in the shop. I'll try to add some better ones tomorrow, if it isn't raining again. I did notice a scratched place on the paint on the back of the engine where something got shoved up against it where it was stored. I took a picture of it. I am leaving enough space in pictures for 2 more pictures to be added tomorrow. I'm sure there are things that I am forgetting to mention. Please let me know if you have a question and I'll get back with you as soon as I can, thanks. Pick up only.
Vtg Bosch DU4 ED.19 VI Magneto Tractor Car Stationary Engine Hit Miss Coil d id not t est good on meter. Nice cap. Cap is missing one screw. Spin is a little stiff. See photos in super size for condition. Call me 10am-7pm Central Standard Time with any questions. Patrick 816-810-1161. Or feel free to email me. Local pick up and payment is always welcome. We do buy and resell from estate sales and cannot guarantee that items come from a smoke and or a pet free home. Please see my other listings. My wife's ebay accounts are kimberly7099 and packratmayhem. We combine shipping when possible. Remind us if buying from different accounts. By bidding on my items. You agree to the following terms: Buyers responsible for insuring this item suits their needs before bidding. Payment due within 5 days of sale date. If you have a problem with your ... moreorder. Please email me through ebay( I check ebay messages daily, I don't always check my regular email) before filing a claim or leaving negative feedback so I have a chance to correct the problem. No warranties or guarantees expressed or implied. For returns with reasons other than"Significantly Not as Described" We charge a 15% restocking fee. Items may be indiscreetly marked and photographed to identify for returns, no refunds will be given for items that do not match our marks. Please be sure the item is the one you need BEFORE you bid. I list items,to the best of my ability,their proper application and interchangeability, but I am only human and mistakes can occur. You are encouraged to research items yourself to double check their proper application. This step,along with good communication, will ensure a positive ebay experience for all involved. International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are n
Vintage Fairbanks Morse Cast Iron Hit Miss Engine Starting Crank Handle Description This auction is for a vintage cast iron crank for an old Fairbanks Morse hit& miss engine. It is marked Z014( I think. It is marked right under a nut, could be ZQ14) It measures about 12" long and the opening is 2 3/8" diam(interior measurement) It has a rusty patina but otherwise is good with no chips or breaks. If you have any questions please e-mail me. I can ship it in a flat rate box if that is less expensive but there is not a lot of extra room for packing materials so parcel post would probably be better. I try to describe items well but since everyone is looking for something different please e-mail with any questions before bidding. I answer all e-mails. Almost always within 12 hours. I post the answers to the listing so if you do not ... morehear from me check your junk mail and check the listing page. View My Other Items For Sale for more great finds! If you are interested in more than one of my auctions that close within the same week let me know and I will gladly e-mail you a quote for combined shipping cost. If you would like combined shipping please wait and make one payment when the last auction has closed.
I have for you r consideration an Original Associated Angle Mag GEAR. This is the gear for the Associated engines that run the mag on the 45 degree angle. The bracket must have broke in it's earlier life. The broken piece of bracket is still conected to the gear. If you have a mag set-up and that is missing this gear. Or yours is currently chewed up I have a solution. It has the standard 10 teeth. I believe the bevel gear is the same on all HP'S. I am sure you have been looking for this for some time. There is no doubt in my mind that this gear is in 100% working condition. If you have a project that was being delayed in a search for this magneto gear, your in luck. Or just looking for a very nice nugget to stash on the shelf. Delivery to WI shows or any large shows I attend is always free. Delivery to lar ge shows I may NOT attend ... moreis an option. But there will be a fee. If you have any questions or want to chat about this fine quality piece please call Justin 920-344-8077 Thanks JUSTIN WENDORFF 1051 WILLOW ST. LOMIRA. WI 53048 PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery confirmation. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you re
I have for you r consideration a VERY NICE EARLY POWELL 1/2" NPT Valve. It is in wonderful condition with no wrench marks on the hex's. The cast iron handle has POWELL casted onto each nub of the handle. I do not want to call this valve NOS. But it has little ot no use in it;s day. If you are restoring an early steam project or something water related, I am sure you have been looking for this. There is no doubt in my mind that this valve is in 100% working condition. If you have a project that was being delayed in a search for this period correct valve, your in luck. Or just looking for a very nice nugget to stash on the shelf. Delivery to WI shows or any large shows I attend is always free. Delivery to lar ge shows I may NOT attend is an option. But there will be a fee. If you have any questions or want to chat about this fine quality ... morepiece please call Justin 920-344-8077 Thanks JUSTIN WENDORFF 1051 WILLOW ST. LOMIRA. WI 53048 PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery confirmation. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I wil
Match set note hub broke on one and some braze weld here and there. Posted with
LOT OF ANTIQUE TOOLS(18) USA BUYERS PAY 12.00 SHIPPING COST. PLEASE LOOK AT THE PICTURES AND FEEL FREE TO ASK QUESTIONS. I HAVE OTHER ITEMS LISTED AND WILL COMBINE SHIPPING WHEN POS. SOLD AS IS.THANKS.
John Deere die cast metal toy that is a scale model of a model E and an old water pump. I bought it on an auction and didn't realize it was broken from that far away.The water pump is broken. I was going to fix it. But lost interest. It is batter operated. I think that the engine flywheels are supposed to turn. Feel free to ask any questions.
This is a Steel Name Tag for an old Fairbanks Morse"ZD" 2 H.P. Stationary/ Farm Engine. It is in very good USED condition. This is a part that is pretty tough to locate. In GOOD CONDITION. Any? or more pic's please ask. This has no cracks.Breaks or welds.The actual part selling may or may not be the one in the pic,but will always be of as good or better condition. The shine on it MAY or MAY NOT be the same,as I leave the tags the way I get them& leave the appearance to the buyer. If this is a concern,please contact me& I will let you know& get you a pic of actual part,if it is not the one shown. Ship cost for lower 48 U.S. others please email for cost.Returns on a case by case basis& ALWAYS at buyers expense& ONLY if not properly described. Again.PLEASE ask any? before bidding. U.S. Checks& M/O always ... morewelcome, Just Ask. Thanks
This is a good valve.
Carb for a Stover looks like it says 25ct2. looks pretty good to me. Ask any questions and i'll answer if i'm able. Free priority shipping.
~~VINTAGE CAST IRON 6 INCH WHEEL HIT MISS ENGINE INDUSTRIAL CART Hello. Welcome to our Auction! THIS IS A RECENT ESTATE SALE FIND. THIS IS A NICE VINTAGE WHEEL THAT COULD BE USED OR DISPLAYED. IT MESURES APPX. 6" IN DIA. AND 1 1/4" THICK. Please keep in mind that most of our items are old and used and will show normal wear. Please look closely at the pictures and e-mail with any questions before you bid. Thank you for your interest. We strive for 100% customer satisfaction. If you are unhappy with your purchase. Please contact us before leaving negative feedback. You may also call us during normal business hours(eastern time) with any questions or concerns: 734-219-3612. Please note that because of our large sales volume. We may require up to 5 business days to ship your item. Please keep this in mind when you bid. Thank you for ... moreyour interest in our auction. inkfrog terapeak. InkFrog Analytics.
Up for auction is an antique solid brass model MV No.1 B Tillotson carburator. I know it is very old but am not sure what it fits for an engine Maybe a Model T Ford? This part was recently found in an old Maine estate along with many other vintage& antique items that I will be listing this week- Please check them all out: Included is the carburator pictured. It has the expected wear from age as seen and will need to be cleaned and rebuilt- It looks complete with no cracks or beaks. I WILL NOT SHIP THIS OUT OF THE USA. GOOD LUCK BIDDING! Powered by The free listing tool. List your items fast and easy and manage your active items.
Complete Governor for a CT2 Stover engine. This is in good shape. Nothing stuck or broken. Ready to install.
UP FOR AUCTION* VINTAGE FISHER BRASS FLYBALL GOVERNOR VALVE ANY QUESTIONS PLEASE EMAIL*PAYMENT IS EXPECTED WITHIN ONE BUSINESS DAY. UNLESS WORKED OUT PRIOR TO SALE. ALL SALES FINAL/NO RETURNS
Antique Hit& Miss Gas Steam Engine Bearing Seal Packing Selling With No Reserve! Hi! I have for Auction here a lot of some type of packing stuff. I am not sure what it could be used for. I am selling it as is. Please check out the pictures. Help yourself to a great deal. Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: ... moreOur items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are looking at Items listed by Davey's Salvage. We are a small family run business located in Central Michigan. We do Demolition. Junk Removal, and a
One used exhaust push rod and throttle rod for a Fairbanks Morse 3hp engine. Came from a running engine. Thanks for looking.
BRASS Hit and Miss spicket or spout! Used to cut the flow or open the flow for gas. Oil, water, etc. You can pin it to keep it locked open or locked closed! The elbow says STOCKMAN and this product was MADE IN THE USA! The handle says BURLINGTON BRASS WKS. B-11 PAT NO 1881537 BURLINGTON WIS. MADE IN USA THE THREADS ARE IN GREAT CONDITION! See Pictures! CHECK OUT MY OTHER GREAT ITEMS! ITEM WILL NOT BE SHIPPED UNTIL PAYMENT IS MADE! SHIPPING TO U.S. ONLY! NO INTERNATIONAL SHIPPING AVAILABLE! SORRY FOR THE INCONVENIENCE! THANK YOU!
Old brass and glass oiler for an engine in good used condition. Glass tube measures 5 inches long. Spigot valve works fine. Threads are good.
One used Bosch AB-34 base mount magneto for a Fairbanks Morse throttle governed engine. Came from a running engine. Sparks when tripped by hand, mounting threads are good. Thanks for looking. Shipping to Canada $40
One used head for a Fairbanks Morse 3hp engine. Came from a running engine. Everything works as it should, old frost crack repair. Thanks for looking. Shipping to Canada $40
One good used cast iron governor assembly for a Fairbanks Morse 3hp throttle governed engine using the Bosch AB-34 base mount magneto. I believe this will also work on the 6hp. Came from a running engine. Everything works as it should, flyweight pinion gear was new a few years ago and a couple of the cam gear teeth have been repaired, spark advance weight is a little sloppy. Thanks for looking. Shipping to Canada $40
One good used exhaust rocker assembly for a Fairbanks Morse 3hp throttle governed engine. Came from a running engine. Everything works as it should, no repairs. Thanks for looking. Shipping to Canada $20
One good used carburetor for a Fairbanks Morse 3hp throttle governed engine. Came from a running engine. Everything works as it should, no repairs. Thanks for looking. Shipping to Canada $40
You are Bidding on a Witte Dieselectric 12HP Oil Field engine. It is a Model MD Serial Number D17013. I had this running briefly a couple years ago by injecting fuel in the breather. What a beast! Unfortunately over the winter the plug allowed snow to build in the hopper. Melt and then freeze, cracking the head. I don't have pictures of the cracks at this time but I will try to add them soon. I don't think they would be to hard to weld and I haven't taken the time to look for a new head. The engine is on a home made trailer as seen in the pictures. Trailer has 2 Bulldog Jacks and a 2" hitch. Lights probably need rewired. I wanted this to be the center of my collection but I dont forsee having the time or money any time soon so it needs to go. I reserve the right to end this auction early as I have this for sale locally
Nice looking piece. Patina and surface wear from age and use. All moving parts are free, good glass, looks to be in working order. I saw no makers marks, 1 1/2 marked on base. Looks to be 3/8" threads, approximately 5 1/2" long, 2" wide. Thanks for looking and please check out my other listings through the week. I will combine shipping when possible.
Odd old time oiler gizme. No clue what it came off of, the octagonal brass fitting that the oiler is attached to is about 3 1/8 inches long. Check our other auctions for more interesting items freshly gathered from old Wisconsin estates. Please be prepared to pay for items within 5 days. Shipping to Canada will be less than International amount shown, please ask. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1405e2de10e-0x105-
This offer is for the Webster magneto shown. All the parts move freely but probably the whole thing needs to be cleaned. It was covered with oily sawdust. I tried cocking and tripping the starting lever. But did not see a spark at the breaker points. The points are opening and closing. There are no parts that are rusted tight. There is no damage or repairs. The bracket has two 17/32 holes, 2 3/8 inches apart. I have seen this same bracket listed for a Galloway engine. The whole unit is complete. It even has the brass oiler cup and starting lever still intact. YOUR SATISFACTION IS GUARANTEED. Please contact us before leaving a low rating if not fully satisfied. Tracking. Handling, and Packaging, are Included. Payment must be in U.S. Funds. Do not send cash. No hidden reserves. Don't forget to bid!
Here is a heavy antique cast iron wheel. This is a single wheel that is 6 1/8 inches in diameter. The axel hole is 3/8 inches in diameter. The tread is 1 3/8 inches across. This wheel has a rustic look that makes it a great addition to a collection of wheels decorating your home or garden. It would also be useful if you were trying to gather a set for your hit& miss engine cart. Industrial style coffee table, or other project. There is rust on the tread and wheel. There are spots of roughness and chips around the edge of the tread. Old cast iron wheels are reasonably priced way to add great visual interest to your loft or rustic house.
ZENITH L48 10748 CARBURETOR.LINKAGES WORK.SOLD AS FOUND.CHECK OUT MY OTHER AUCTIONS FOR OLD EARLY ANTIQUE VINTAGE ITEMS.WINNER PAYS SHIPPING AND HANDLING OF $8.50 IN THE DOMESTIC USA Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14060b503fc-0x107-
Up for auction is a John Deere 1 1/2 HP hit and miss engine on its original steel wheeled cart. Excellent condition. Ran just last week. The serial number is: 346280. For pick up only. Please contact me if you have any qiesitons.
Breather for CT Stover engine. There are no breaks. Ready to install on your engine.
WICO EK Trip. This is in ok shape. It is stuck but should not take much to free up. Also. It appears that the retard has a broken handle, but should not affect the use. Will work on most engines that use the WICO EK Magneto.
Handle has small chip in it. This works well. The store had several.one of the workers said he liked this one the most. Please email with any questions.
Nickel Plated Pair of Oilers 1 5/8" Tall Live Steam Hit Miss Engine Auction Watcher Counter from WatchedItem.com Up for bid is a pair of nickel plated oilers. They are 1 5/8" tall and have a pipe thread smaller than the 1/8" tipe size. They measure a total of 5/16" thread diameter. Please check the pictures for details and condition. I accept Paypal only due to new rules implemented by ebay. Will send buyer an invoice within 24 hours after the close of the auction. Paypal payment must be received within 2 business days. Unpaid item allerts will be filed after 2 business unless other arrangments are made with the seller beforehand. I ship using USPS Mail(wither First Class. Media, Parcel Selct, or Priority Mail) I do not intentionally overcharge on shipping and will state in the auction if I have to add Handling fees for ... morepacking material. Ebay now takes 10% of the shipping price so please RETHINK BEFORE YOU DECIDE TO LEAVE BAD DSR'S FOR SHIPPING AND HANDLING OR SHIPPING TIME! The shipping time and service have had the terms listed. I ship several times a week. I WILL combine for shipping. Items will be shipped through USPS Mail. If another method of shipment is desired. Just ask. All Items for sale are packaged and weighed prior to listing. These weights are plugged into the ebay listings and you pay exactly what the Post Office would charge me to ship your items. I do NOT overcharge on shipping nor charge any handling or packaging fees unless otherwise specified in the aution. If through any error I have accidentally overcharged you. I will reimburse the amount that was overcharged. Items are sold as is no returns. Items are described as accurately as possible. What you see in the picture is what you are bidding on. I do not leave anything out of my listings. If you have an questions. Please do not hesitate to ask! I want pleased and returning customers! Please just use the ask seller a question feature, and I will respond back as fast as I can!
Nickel Plated 1/4" Michigan Lubricator Co Drip Oiler Live Steam Hit Miss Engine Auction Watcher Counter from WatchedItem.com Up for bid is a great looking Michigan Lubricator Co. drip oiler that is nickel plated. It has a 2 1/4" diameter glass and stands a bit over 6 inches tall total. It has a 1/4" pipe thread. There is a little marring on the hex area on the base and some light wear on the top by the filler area. It has what looks like some black paint here and there. It has a great amount of coverage of the plating. Please check pictures for details and condition. I accept Paypal only due to new rules implemented by ebay. Will send buyer an invoice within 24 hours after the close of the auction. Paypal payment must be received within 2 business days. Unpaid item allerts will be filed after 2 business unless other arrangments ... moreare made with the seller beforehand. I ship using USPS Mail(wither First Class. Media, Parcel Selct, or Priority Mail) I do not intentionally overcharge on shipping and will state in the auction if I have to add Handling fees for packing material. Ebay now takes 10% of the shipping price so please RETHINK BEFORE YOU DECIDE TO LEAVE BAD DSR'S FOR SHIPPING AND HANDLING OR SHIPPING TIME! The shipping time and service have had the terms listed. I ship several times a week. I WILL combine for shipping. Items will be shipped through USPS Mail. If another method of shipment is desired. Just ask. All Items for sale are packaged and weighed prior to listing. These weights are plugged into the ebay listings and you pay exactly what the Post Office would charge me to ship your items. I do NOT overcharge on shipping nor charge any handling or packaging fees unless otherwise specified in the aution. If through any error I have accidentally overcharged you. I will reimburse the amount that was overcharged. Items are sold as is no returns. Items are described as accurately as possible. What you see in the picture is what you are bidding on. I do not leave anything out of my listings. I
Local pickup only! Up for auction is one Sattley for Montgomery Ward 1.5 horsepower stationary engine. One cyl. Flat head all iron engine. Fuel and oil tanks in base. Seems to have great compression, and was under restoration when I got it. It does not make spark currently, but it seems to have all components to do so. I believe the only thing missing is an air filter. Fluids are drained. Comes with custom made socket that fits in a 1/2 drill chuck(seen in photo) for rotating engine for starting. I do not have time to pack this for shipping. Local Pickup only. Cash at pickup is fine. Pickup within 2 weeks of end of auction, but the sooner the better. Thank you, and good luck bidding.
VINTAGE HIT AND MISS GAS ENGINE/ STEAM ENGINE DRIP OILER.IT IS A 90 DEGREE DRIP OILER AND IS NICKLE PLATED WITH NORMAL WEAR.THERE IS A CRACK IN THE GLASS.LOOK AT PICTURES.THE GLASS IS 1 1/2" IN DIAMETER BY 1 3/16" HIGH.THE NAME ON IT IS VERMONT FARM MACH.CO.BELLOWS FALLS VT.AGAIN LOOK AT PICTURES.
Selling With No Reserve! Hi! I have for Auction here a 8" dia. x 1-3/4" wide cast iron flat belt pulley. The shaft size is 5/8" There are no cracks/breaks that I could see. Would also make a nice decor item or use at a hit and miss engine show etc. It weighs 5 lbs. See Pictures. Get yourself a great deal here. NOTE: I add a $1.50 on all my Priority Mail& $2.00 on regular packages for handling and supplies plus the 9% that eBay charges me on shipping(which is already included) I have people leaving low DSR's on shipping cost's and I really need you to decide that it is okay to pay the shipping that I have on here before you bid or don't bid on my items. Low DSR's cost me a lot as it won't bring me up in search results as quick and I also loose a 20% discount off my eBay fees. I'm selling on eBay to ... moremake a living for me& my family and I can't do the shipping for nothing. I realize that shipping prices just went up again with shipping companies but it can't be taken out on the sellers. Thanks for understanding Local pick-up is always welcome! For more information you can call Steve at: 989-802-9508. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 5 days. We appreciate your prompt payment. We accept payment thru Pay-pal. Cash for pick-up items.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our items are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the buyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 30 days. After 30 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specif
Vintage G B Brass Company Michigan Oiler looks to be in great shape no other parts included.Glass is solid no cracks or chips. 2-1/4" diameter WINNING BIDDER WILL PAY 6% sales tax if in Pennsylvania I describe and show accurate photo's so ITEMS are sold as is as shown in photo's no returns Payments expected within 5 days of purchase. We will combine items if they end within the same week only. Sunday to following Saturday No need to fear anything buying from us.We are honest and customer service is our main goal. Please contact us if there are any problems before leaving any bad feedback I am here to help. We ship all items USPO Mail unless specified in the listing.
Vintage Michigan# 46A3 Engine Oiler in good condition has needles and such still in place was holding water fine dont think it leaks.Both glass bowls excellent condition. WINNING BIDDER WILL PAY 6% sales tax if in Pennsylvania I describe and show accurate photo's so ITEMS are sold as is as shown in photo's no returns Payments expected within 5 days of purchase. We will combine items if they end within the same week only. Sunday to following Saturday No need to fear anything buying from us.We are honest and customer service is our main goal. Please contact us if there are any problems before leaving any bad feedback I am here to help. We ship all items USPO Mail unless specified in the listing.
For auction is a parts mag- Not sure what all it fits. Please look at the picture closely as these are a big part of the description and ask me any questions before bidding. If you want more pics just let me know and I will email them to you. This item is being sold as is. I will combine shipping whenever possible to try and save money. Many of the items I sell are vintage and although I try to describe everything I see. I am not an expert and may miss things or some things I think of as insignificant may be very important to you, so please email me with any questions first. If you are not happy with your item you can return it and I will refund you the purchase price(you have to pay shipping) Thanks for looking and please check out my other auctions. Thanks. I am currently traveling a lot for work so I am mostly shipping on the weekends. ... moreI will try to ship your item as soon as possible but it may not go out until Saturday or Monday depending on my schedule. If you have any problems with your purchase please contact me through ebay. Thanks. hit and miss fairbanks Z style C 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1406e472717-0xfa-
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Up for auction is a rare antique car. Tractor or motorcycle part. Here is a 1938 Splitdorf SS magneto. It appears to have been harvested as the four wires are just simply cut. I am not an antique motor guy and don't know much about this other than it spins freely with a little kick back I am sure is supposed to be there. There is a spark advance lever in the front. Marked SPLITDORF SS 3323 Model SS No. 23443. NOTE: I do not know what this came off of. I see reference to Indian Motorcycles but have no idea if this ever went to that. Weighs about 20 lbs. and is super clean! Ask me anything and I will try to answer your questions the best I can. Thank you for looking! Andrew
You are bidding on a wonderful VINTAGE RESTORED 1946 MAYTAG STATIONARY ENGINE. This engine is really beautiful. It was gone over from head to toe. It has cloth wrapped EISEMANN PLUG WIRES AND NEW PLUGS. The engine was tested to be fine. The original gas tank was cleaned. The paint and decal is good and there is no damage. Flywheel is solid and has no cracks. Because of the age of this engine I am selling without warranty. The collector I purchased it from said it worked fine and in checking it over I see no reason why it shouldn't. It has compression and spark. It's a super nice twin cylinder MAYTAG for your collection! If you have any questions. Please contact me. Please check out my other listings. We buy a lot of households and get quite a bit of unique and rare items. I will do my best to keep shipping costs down on multiple items ... moreand will combine shipping when feasible. If you like what you see please add us to your favorite sellers list. Thanks folks!
You are bidding on a wonderful RARE 1920 VINTAGE INSTRUCTION MANUAL FOR THE INTERNATIONAL 10 H.P. STATIONARY ENGINE. These instruction manuals are very hard to find. The manual is in good condition without damage or missing pages. Dated on the cover 12/22/1920. Full of illustrations. Diagrams, and instructions on use. A great addition to your collection. If you have any questions. Please contact me. Please check out my other listings. We buy a lot of households and get quite a bit of unique and rare items. I will do my best to keep shipping costs down on multiple items and will combine shipping when feasible. If you like what you see please add us to your favorite sellers list. Thanks folks! e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-14070694b1c-0xf8-
This is an original Ford Model T Buzz Coil that was used on a Hit and Miss Engine. This has original Farhnestock clips to attach your ignition wires to. This is for an engine with a sparkplug ignition. I cleaned this up. Adjusted the points, put a 6 volt battery to it and is buzzes and throws a spark.
I have up for your consideration A very nice original Hit and miss Engine Dempster Corn Grinder Burr Mill would be perfect for a 1 to 3 horse engine this mill stands about three feet tall and has a removeable hopper that has tons of original stencilling on it the hopper appears to have red paint and there is traces of what looks like Green paint on the main body the mill seems to work I ran some corn through it and it grinds it up as it should the the burr plates look to be in good shape and the adjustment screw works as it should These are very hard to find in original shape I sell all of my gas engine parts as parts not working as they are close to 100 years old what you see is what you get nothing more nothing more nothing less I will combine shipping when possible this grinder will be shipped in two seperate boxes hopper in one and grinder ... morein another See Photos! Check out my other auctions for old farm engine and tractors parts! Large heavy items can be picked up here in Mid Missouri I accept Paypal Cashers check Money order or Personal check I will Combine shipping when Possible It is easier to contact me via my phone number and ask me your question as I do not live on my computer Thanks Kris 660 287 1129 I live about 2 hrs south east of Kc MO not to far off of Interstate 70 Thanks kris I never put a reserve on my auctions what they bring is what they bring so bid like crazy thanks again Kris Due to my 10 hour day work schedule I will ship the iten as soon as I possibly can usually on Friday and Saturday mornings Thanks Kris On Feb-08-10 at 16:56:43 PST. Seller added the following information 3.
Vintage Cast Iron Wrench Delco Light Hit Miss Gas Engine Light Plant Spark Plug Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Vintage Cast Iron Wrench Delco Light Hit Miss Gas Engine Light Plant Spark Plug Here’s a chance to own the seldom seen Spark Plug wrench for the 32 Volt Delco DC Power Plant powered by its constant throttle gasoline engine. Please check my other listings for other wrenches. Brass nozzles, ephemera, photographs, postcards, sports cards and books. Please look at the pictures. And ask all questions before bidding. I combine purchases when possible. Lower 48 state bidders only. This means I DO NOT SHIP TO CANADA. HAWAII or ALASKA! Please DO NOT BID if you won’t agree to make your payment within 3 days after the auction ends BECAUSE THE eBAY ASSISTANT WILL AUTOMATICALLY FILE NON-PAYER STATUS! This ... moreis necessary because I can not ship without assistance and my help is scheduled to correspond to the ending day of the listings.
Iron Wrench Iowa Cream Separator Hit Miss Engine Display Décor Man Cave Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 This is all that remains of the Iowa Cream Separator used for many years as a staple of daily operations in my grandfather’s house in Salem. Indiana. The separator became a front porch flower stand until its demise. Please check my other listings for other wrenches. Brass nozzles, ephemera, photographs, postcards, sports cards and books. Please look at the pictures. And ask all questions before bidding. I combine purchases when possible. Lower 48 state bidders only. This means I DO NOT SHIP TO CANADA. HAWAII or ALASKA! Please DO NOT BID if you won’t agree to make your payment within 3 days after the auction ends BECAUSE THE eBAY ASSISTANT WILL AUTOMATICALLY FILE NON-PAYER STATUS! This is necessary ... morebecause I can not ship without assistance and my help is scheduled to correspond to the ending day of the listings.
Pulley in good condition. Ihc. Check photos for names. Numbers and info. If you have any questions please ask. Thanks for looking Free shipping! Posted with
American Bosch magneto. Does not seem to have an impulse on it; however. If you spin it over fast(with a drill) it makes a bright blue spark. Sold as is where is. Questions? Call or text 609 780 3782 or use the ask the seller a question button. Payment by Paypal. Major credit card or cash at pick up. NJ buyers add 7% sales tax. Item must be paid for within 5 days of the sale. Shipping by USPS flat rate box. Be sure to Check out my!
You are bidding on a very nice carburetor with screws. For a Maytag 92 engine. This carb is really flawless. It has no chips or pitting. It came off a running engine and it ran it great. This carb needs nothing but a gasket, and an engine to put it on. Feel free to ask questions. Will combine shipping on items IF possible to save you money. Good luck and happy bidding!
You are bidding on a nice original inspection cover. For a Maytag 92 engine. Feel free to ask questions. Will combine shipping on items IF possible to save you money. Good luck and happy bidding!
This is an original Massey Harris umbrella. It looks like it would've been used for demonstrations or at fairs. Etc because of it having"merchandising dept" on it. It is in good condition(has a couple places where the cloth is missing, but still very nice) and measures 52" x 53-1/2" You won't want to miss out on this great piece! The pictures tell the story. Good luck.
These are original Victor Equipment Company gas regulators. They are in nice condition. The handles are both intact and the covers over three of the gauges are intact. But 1 is missing and the top of the gauge is dented(can probably be fixed) These could be just what you're looking for. The pictures tell the story. Good luck.
This is an original Harris Colorific Company gas regulator. It is in nice condition. The handle is half there(but still can be used) and the covers for over the gauges are both intact. This could be just what you're looking for. The pictures tell the story. Good luck.
These are original Smith Equipment Company gas regulators. They're both in nice condition. The handles are both intact along with the covers for over the gauges. These could be just what you're looking for. The pictures tell the story. Good luck.
This is a brass crank case oil sight gauge. It has 1/8" pipe thread. It is in good condition. The glass is missing. But you can usually get it from several hobby suppliers. There are no cracks, breaks or repairs of any kind. It is ready to go and ready to install. The pictures tell the story. Good luck.
Description: Vintage Briggs& Stratton operating and maintenance manual with parts catalog for Model WMB. Washing machine engine. Condition: Good condition. Some soiling mainly on outside. Approx. Measurements: 8 7/8 x 6 Be sure to check out my other vintage MANUALS on sale: View My Other Items For Sale: be one of the first to know which items are marked down for quick sale! Click on pictures to SUPERSIZE- Please note in bidding. Or buying this auction you are entering into a binding contract. In bidding or buying you are agreeing to all policies stated below. You have thoroughly read the item's description. Auctions contain only what is described. Do not assume something comes with an item if it is not stated in the auction verbiage. You have enlarged the full set of complementary photographs. Our images are unedited in order to represent ... morethe item as accurately as possible to the buyer. Images can disclose identifying marks. Inclusions or defects. You understand that items are sold as-is unless otherwise stated. This policy will be void if the item is opened or modified by unauthorized parties. Customs It is common for countries to charge some form of customs duties. Taxes, VAT, or brokerage fees on items being shipped from the USA. These costs, along with country-specific importing rules and delays caused by customs, are the buyer's responsibility. We declare all items for the winning bid amount. Customs duties. Taxes, brokers fees, VAT, and brokerage fees are the responsibility of the buyer. We do not falsify customs documents to assist you in evading your lawful taxes. You have read and accepted our shipping. Payment, and return policies. eBay's Policy states: In general. You're expected to pay as soon as possible.after you win or buy an item. Thanks for looking& happy bidding! PLeAsE Add me to your Favorite Sellers!
Vintage Olds Seager Engine Works Gas& Gasoline Lansing Michigan Hit and Miss This is the real one no reprint here- Type A Engines- great photos- cutaways- testimonials- practical use- ignition system- governor- air cooled- the bad thing is the pages in the middle are loose and it's missing page 23 to 26- some soiling- still a bunch of great information and photos. Measures about 7" x 10" You will receive what is pictured above. PLEASE ASK QUESTIONS or If More photos are needed please let me know. All USA packages will have tracking- which is added into the postage- I DO COMBINE SHIPPING. For savings to you. You will recieve your Tracking Number upon request. Overseas: your shipping starts a $6.60 and goes up from there.
I THINK THIS IS A GAS TANK FOR A HIT OR MISS ENGINE BUT THE OUTLET IS ON THE TOP WITH THE FILLER CAP AND VERY SMALL LIKE 1/16 INCH OR LESS NOT SURE HOW THAT WORKS DIRTY PAINT MISSING FADED OR FLAKED OFF SEEMS TO BE MADE OF TIN ABOUT 7 1/4 INCH LONG 4 3/8 INCH WIDE 2 INCH HIGH BUYER TO PAY 6.00 FOR USPS PARCEL SELECT MAIL INTERNATIONAL BUYER TO PAY 32.00 FOR USPS FIR ST CLASS INTERNATIONAL MAIL
VINTAGE BRASS DRIP OILER VERY GOOD CONDITION PLASTIC RESERVOIR 3" DIAMETER 6-1/2" TALL FREE SHIPPING USA ONLY ALSO REMEMBER INCLUDED IN SHIPPING COST IS DELIVERY CONFIRMATION. THANKS FOR LOOKING AND BE SURE TO CHECK OUT MY OTHER AUCTIONS! Please contact me within 3 days of auction end unless payment has been made. E-Bay is no longer allowing the use of paper payments. This is because they believe it is to complicated for buyers to have to choose between multiple payment methods. Because of this change. We cannot advertise as accepting any paper payment method. We will ALWAYS ship out any item that is paid for. Regardless of how. We DO NOT accept Personal Checks. Buyers must pay within 7 days of purchase or the item will be put back up for auction. If you have your item shipped within the state of Missouri or arrange for a local ... morepickup there is a 7.7% sales tax that will be applied to your invoice. Paypal is Preferred. INTERNATIONAL BUYERS ARE RESPONSIBLE FOR ANY IMPORT/CUSTOMS FEES OR TAXES SERIOUS BIDDERS ONLY. Disputes will be filed with eBay within 7 days of an auction's end if the buyer has not responded to payment requests. FEEDBACK: AS A SELLER. THE WAY WE KNOW YOU HAVE RECEIVED YOUR ITEM AND ARE HAPPY IS WHEN YOU LEAVE US FEEDBACK. WE WILL BE LEAVING YOU A POSITIVE FEEDBACK UPON RECEIPT OF PAYMENT. SINCE WE WANT ALL OUR BUYERS TO HAVE A POSITIVE TRANSACTION WITH US, WE WILL AWAIT YOUR FEEDBACK. IF YOU HAVE ANY PROBLEM WITH YOUR ORDER, PLEASE CONTACT US AND GIVE US A LITTLE TIME TO WORK THROUGH YOUR ISSUE BEFORE LEAVING BAD FEEDBACK. IF THE FIRST TIME WE HEAR ABOUT YOUR PROBLEM IS THROUGH BAD FEEDBACK, WE HAVE NO OPPORTUNITY TO PROVIDE YOU A POSITIVE BUYING EXPERIENCE. REMEMBER THAT NEUTRAL IS ALSO VIEWED AS BAD FOR A SELLER! WE WANT YOU TO HAVE A POSITIVE BUYING EXPERIENCE! WE DO NOT CONTINUE TO DO BUSINESS WITH CUSTOMERS THAT CHOOSE TO LEAVE NEGATIVE OR NEUTRAL FEEDBACK. CONTACTING US: Please use the contact seller link in the auction you have won or have a question about. Please do not emai
These are 2 RARE Antique Vintage Maytag Wrenches/ Hit Miss Gas Engine Tools Unabused Splines. Large octagon hole in one is approx. 1 1/8" Large octagon hole in other is approx. 7/8" Shown in pictures#7& 8. They were a great find and would be a great addition to anyone's tool collection. We are picturing exactly as we purchased. If they were ever used it appears to be very little. Any questions or comments are always welcomed. Thanks and God Bless. Dave
This is a main bearing cap for a Fairbanks-Morse Z. It is part#DJ12 and mounts with two 5/8" holes that are 2-5/8" apart on center. It is in good condition. No cracks. Breaks or repairs of any kind. It is ready to go and ready to install. The pictures tell the story. Good luck.
This is a Stover K main bearing cap. It is part#14K2 and mounts with two 1/2" holes that are 2-1/2" apart on center. It is in good condition. No cracks. Breaks or repairs of any kind. It is ready to go and ready to install. The pictures tell the story. Good luck.
This is a Stover rocker arm stand support. It is part#8K3 for a 2H Stover K. It may fit a C.T. Stover. It is in good condition. No cracks. Breaks or repairs of any kind. It is ready to go and ready to install. The pictures tell the story. Good luck.
These are original used valves. Springs and keepers for a Stover hit and miss engine. They are in good condition. No cracks, breaks or repairs of any kind. They're ready to go and ready to install. The pictures tell the story. Good luck.
This is a nice. Original IHC hay press bell. It is used when a bale needs to be tied or a drop block needs to be put in. It is in nice condition and still works. If you own a hay press, this could be one of the pieces you're missing! The pictures tell the story. Good luck. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14079f7980b-0x100-
Being offered is a hit&miss-steam engine-tractor cloth endless belt. This belt is 6 inches wide. 49 foot loop. 98 total feet of belt. There are NO splices. This belt shows very light signs of wear and is ready to use. Buyer to pay actual shipping UPS. Thanks for looking.
Antique Vtg 1928 Maytag 92 Single Washing Machine Engine Hit& Miss Watch a video of it running via squirt bottle above. Serial#313353. This one has the screen and brass ring air filter. The spark plug wire just needs a new clip end. This engine has its Maytag spark plug but the tip is missing. See photo. Is missing its tag and kill rod, easily replaced. No apparent cracks, breaks or repairs. See my other antique engine ads. I will be listing more over the next several weeks. See photos in super size for condition. Call me 10am-7pm Central Standard Time with any questions. Patrick 816-810-1161. Or feel free to email me. Local pick up and payment is always welcome. We do buy and resell from estate sales and cannot guarantee that items come from a smoke and or a pet free home. Please see my other listings. My wife's ebay accounts are ... morekimberly7099 and packratmayhem. We combine shipping when possible. Remind us if buying from different accounts. By bidding on my items. You agree to the following terms: Buyers responsible for insuring this item suits their needs before bidding. Payment due within 5 days of sale date. If you have a problem with your order. Please email me through ebay( I check ebay messages daily, I don't always check my regular email) before filing a claim or leaving negative feedback so I have a chance to correct the problem. No warranties or guarantees expressed or implied. For returns with reasons other than"Significantly Not as Described" We charge a 15% restocking fee. Items may be indiscreetly marked and photographed to identify for returns, no refunds will be given for items that do not match our marks. Please be sure the item is the one you need BEFORE you bid. I list items,to the best of my ability,their proper application and interchangeability, but I am only human and mistakes can occur. You are encouraged to research items yourself to double check their proper application. This step,along with good communication, will ensure a positive ebay experience for all involved.
Cast iron toy Fairbanks Morse engine. The paint is about 75% And the flywheels may have been repainted,but I don't see any breaks or repairs,It's a great shelf item or shop item( depending on your wife) And has lots of patina.Ask questions if you got em. USA addresses only,Thanks for looking!
stewart warner 750 r.p.m gage tachometer.the face is 5 1/4 inches across including the trim.The brass tag says calibration 1-2 do not remove I do not now what it is for where I found it was all early car parts from the teens and 20s or could be from a hit and miss motor- steam engine model t or whatever else is slow.all in good condition and working please check my other auctions Powered by The free listing tool. List your items fast and easy and manage your active items.
Face of pulley it 5" Diameter is 4" and has three bolt holes, came off a De Laval engine 1.5 HP I think
Cast Iron Wheel Maytag Railroad Cart Hit and Miss Engine Farm Wagon Set& Axle Wheels are 6" in Diameter Axle is 22" inches long Total Weight is 7 pounds 10 ounces. Thanks for viewing my items Low Starting bid with No Reserve View the photo's Provided.
Antique 4-1/2" x 3" Hit& Miss Gas Steam Engine Line Shaft Flat Belt Pulley Selling With No Reserve! Hi! I have for Auction here Flat Belt Pulley. It is 4-1/2" in diameter with a 3" face. The shaft size looks like it is 5/8" The part number on the Pulley is JP7 4-1/2. This is a nice little Pulley. Help yourself to a great deal. Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can ... morebe mailed to: David Shell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are looking at Items listed by Davey's Salvage. We are a small fami
Lot of Antique Vintage Hit& Miss Gas Steam Engine Greaser Grease Cups Selling With No Reserve! Hi! I have for Auction here a lot of 6 Grease Cups. They are all about 1-1/2" in diameter. This is a nice little lot of Grease Cups. Great to add to your collection. Help yourself to a good deal. Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. ... moreMI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are looking at Items listed by Davey's Salvage. We are a small family run business located in Central Michigan. We do Demolit
Lot of 5 Antique Brass Essex Lavigne Hit& Miss Gas Steam Engine Oilers Selling With No Reserve! Hi! I have for Auction here a lot of 5 brass Oilers. The glass in 2 of them is good. The oilers all appear to be in good condition. But will need glass. They range from 1-1/4" to 2-1/2" in diameter. Check out the other neat Oilers I have listed this week! Help yourself to a good deal. Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about ... moredifferent payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are looking at Items listed by Da
Rare Early Antique G B Essex Brass Co Pump Type Steam Engine Hit& Miss Oiler Selling With No Reserve! Hi! I have for Auction here a little G B Essex Oiler. The total height is 6-1/2" The glass diameter is 2-1/4" This is a neat little Oiler with a valve on the bottom. Help yourself to a great deal. Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. ... moreFarwell. MI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are looking at Items listed by Davey's Salvage. We are a small family run business located in Central Michigan.
Up for bids at auction: Up for bids is this antique“Oilgear” Hydraulic/ Steam Gauge. This was a barn find from an old farm estate in Central Iowa. Condition wise. It is good, there is no glass, as you can see in the pictures, but the case is good and solid, the brass ring and fittings all look good and if you move the needle it will spring back into place. Marked: THE OILGEAR COMPANY ~ HYDRAULIC ~ TONS ON 3 7/8 IN. RAM/ LBS PER SQ. INCH” It has been lightly cleaned and rubbed with an all-natural beeswax to protect its great looking old patina and is ready for display in any rustic/ primitive setting. Perfect for the steam engine era/ old industrial era collection. Measures- 5 ¾ inches in diameter and 3 7/8ths inches thick(excluding the brass pipe fittings) Please refer to the pictures and feel free to email with any questions. The items ... moreI sell are Barn and Farmhouse finds from old farm estates throughout Iowa. Illinois, and Missouri. Many of them have been cleaned to preserve their original old patinas and are ready for display. Every step is taken to protect the evidence of years of use and aging. Some items we leave in as-found. Rustic condition with rust, dust and dirt to be restored to your liking. Selling without reserve to the highest bidder. Don’t miss out by waiting until the last minute. Once it’s gone… its gone. Keep in mind that the quality. American-made items I sell are from a bygone era. Items made to be used a lifetime; from a time of values. Quality and dependability. You will not find them in today’s mega-stores. Please see my other auctions. Thanks for looking and good luck. Read the following section carefully I have proven myself to offer low shipping rates. Provide excellent customer service, and ship rapidly. With this in mind- I will answer any questions you have about an item as promptly and thoroughly as possible. When you purchase the item. It will ship within 2 business day of payment. Items are shipped directly. So you wont have to wait for me to“drop it off at the post office
Unique Brass Antique Hit& Miss Gas Steam Engine Double Lavigne Co Detroit Oiler Selling With No Reserve! Hi! I have for Auction here a unique Brass Oiler. The total height is 7" The glass is 3" in diameter. This is a neat old double Oiler. Check out the other neat Oilers I have listed this week! Help yourself to a good deal. Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: David ... moreShell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are looking at Items listed by Davey's Salvage. We are a small family run business l
I have a previously refurbished carb for a 6 hp IHC"M" engine. It is the two needle kero carb. Suitable for the early ignitor engines.The start-run valve moves and has a new brass handle brazed on. The drain and gas fill plugs have been remanned, I'm sure. The choke plate is also a shop built replacement. I've never used the carb on an engine so it may yet need some tinkering but it should be ready to go. The two needle valves are original brass too. See pics for best description. Selling as is to avoid disputes. Weighs almost 10.5 lbs. Shipping costs have risen tons since I first started selling on eBay. 5 years ago, I could have mailed this for a 20 dollar bill anywhere in North America! Shipping will be actual cost, $35-$45 USD depending how far you are from Ontario. Simply bid accordingly. It'll be about 85 bucks ... moreto Int'l destinations. I accept PayPal, cash on pickup and other forms of payment. Thanks for looking. As always. Please ignore the useless shipping calculator. Thanks. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1407fb3ca5c-0xf2-
Cool Old Antique Hit& Miss Engine Era Small Air Compressor Pump Selling With No Reserve! Hi! I have for Auction here a cool little Air Compressor. The pulley that is on it is just under 9" in diameter. This Compressor was mounted to a tank and ran by an old Maytag motor. It looks to be in good condition and spins nicely. The only damage is a little chip on the flange of the pulley. Also included in this auction is some pop and check valves. Fittings and a pressure switch. Help yourself to a great deal. Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept ... morepayment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your s
Large Heavy Duty Cast Iron Hit& Miss Gas Engine Spark Arrestor Muffler Selling With No Reserve! Hi! I have for Auction here a really cool heavy duty Muffler. The end pieces are cast iron. The outside diameter of the pipe is 1-7/8" The diameter of the Muffler is 6" and it is about 5-1/2" long. This would be for a large Engine. It looks to be in good usable condition. Help yourself to a great deal. Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you ... morehave questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are lookin
This is a nice brass W.H. Wilkinson and Company oiler. It has the glass on the top and bottom. No check ball or vent tube. The filler cover is intact and the threads are good. It measures about 8-1/2" long and about 3-3/4" in diameter. If this is what you've been needing, don't take a chance and pass it up! The pictures really tell the story. Take a look! Good luck.