In 
 
Order by: 
Available to: 
Price: 
 - 
$
1,199.99
Buy It Now
$0 Shipping
Condition: Used
Location: Covina,CA,USA
$
480
Buy It Now
Free Shipping
Condition: Used
Location: Bensenville,IL,USA
HARDINGE CROSS SLIDE MODEL E RISER& D6 MULTIPLE TOOL HOLDER INCLUDED Very good used condition. As pictured. Payment due within seven days of purchase. ... moreCheck. M/o, and PayPal accepted. Buyer pays actual shipping cost. Thanks for looking!
$
4,950
8d 2h 27m 3s
0 bids
$0 Shipping
Condition: Used
Location: Oxnard,CA,USA
$
1,250
Buy It Now
$0 Shipping
Condition: Used
Location: Brooklyn,NY,USA
EARLY B.C. AMES 8-3/8" LATHE. CATARACT STARK HARDINGE DALTON RIVETT ELGIN. This is an B.C. AMES, WALTHAM MASS. 8-3/8" X 21" PRECISION BENCH ... moreLATHE, 1900-1930. 32" long bed. I don't have a tool post or tail stock center. As far as I can see everything moves freely and operates properly. Please let the pictures help with the description and condition and view my other auctions for more LATHES and TOOLING. Insurance is included in the shipping price. Free local pickup always welcome. I can most likely get you a better shipping price than Ebay's shipping calculator by using a different shipper. Give me a call with your zip code at 401-330-9303 thanks, Bill. Check my feedback, satisfaction guaranteed and will combine ship when possible. I have this advertised locally and reserve the right to end the auction at any time.
$
2,000
Buy It Now
Free Shipping
Condition: Used
Location: Piasa,IL,USA
$
425
Buy It Now
$0 Shipping
Condition: Used
Location: Westerly,RI,USA
$
2,000
Buy It Now
Free Shipping
Condition: Used
Location: El Monte,CA,USA
$
2,500
Buy It Now
Free Shipping
Condition: Used
Location: Canoga Park,CA,USA
This is a kit to repair your top slide. It comes with: A drill bushing. A#3 center drill. The drill for a 1/2 acme tap. A 1/2 LH acme tap. A new brass ... morenut that you put in place and the tap. Instructions from 1961. All of the tools are extended so they fit in a bushing and reach the nut once installed. This allows you to use a hand drill to cut the slide nut once it is in place for optimal accuracy. It is all in good condition but it has been used once. It looks like the hand drill spun on the shaft of the drill bit but its not bad. I am tempted to frame the instructions and hang them in my shop but you may need them.
$
5,900
Buy It Now
Free Shipping
Condition: Used
Location: Hudson,CO,USA
HARDINGE HC CHUCKER SUPER PRECISION LATHE 9” X 14” 3000 RPM MAX Description: Up for sale is a Hardinge Model HC Super-Precision Chucking Lathe. This Hardinge ... morechucker is in good working and operating condition with little signs of wear or use. It features a maximum fixture diameter of 9” A maximum distance from face of the turret to the spindle of 14” and a max speed of 3,000 RPM. It comes with its original manuals, and pictured parts and tooling. SPECIFICATIONS MANUFACTURER HARDINGE MODEL HC SERIAL HC-8556-T MAX FITURE DIAMETER 9” MAX DIST FROM FACE OF TURRET TO SPINDLE 14” SPINDLE CAPACITY W/ 5C ROUND COLLET 1-1/6” TRAVEL OF CROSS SLIDE 4-½” SPINDLE SPEEDS LOW: 125-1.100 RPM HIGH: 1.100-3,000 RPM WEIGHT APPROX 1750LBS FOR MORE INFORMATION PLEASE CALL GARY AT(510) 453-0513 FOR MORE INFORMATION PLEASE CALL GARY ARAGON AT 510 453-0513 LOCATED AT 601 ALADDIN AVENUE. SAN LEANDRO. CALIFORNIA 94577* TERMS AND CONDITIONS* SALES Your bid is a contract. Place a bid only if you are serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within three days of the end of the auction, or if payment isn’t received within three days of the invoice date, item may be offered to the next highest bidder or re-listed at the sellers’ discretion. Please do NOT pay until you are invoiced! PAYMENT TERMS Gary S. Aragon. LLC accepts ATM and these major credit cards: Visa, MasterCard, Discover. Buyers may call us at 510 453-0513 with credit card information. You can also use PayPal. PayPal payments should be sent to garysaragon(at) comcast.net. CALIFORNIA STATE SALES TAX APPLIES TO ALL STATE RESIDENTS… unless we receive a valid resale card. EBAY TERMS eBay charges Gary S. Aragon. LLC a service charge for each item we list. If a customer cannot or does not pay for an eBay purchase in the specified amount of time, Gary S. Aragon, LLC will file a non-paying bidder alert wit
$
850
Buy It Now
$0 Shipping
Condition: Used
Location: West Palm Beach,FL,USA
Elgin Tool Co. Turret Tail Stock. The specks in photos is saw dust on item. The rust is very minimal and would easily be removed with a scotch bright ... morepad. The Handle has been changed to wood but is secure. Unit is fully functional. Missing one of the small thumb screws on the back end of the unit. This was on my Hardinge split bed lathe when i got it and have no need for it. it fits bed that are 2-9/16 at the top surface and 3' at the bottom. Relisted because itsNOT for a dovetail lathe bed. It has T nuts to hold it down to the bed of a split bed hardinge lathe. Could find no other part number on unit other then one in photo. Email any questions.
$
210
Buy It Now
$16 Shipping
Condition: Used
Location: Unionville,CT,USA
Up for bid are these Hardinge C4 Lathe cutting tool holders 3 Pcs w/ tooling. Items are in good shape
$
19,000
Buy It Now
$0 Shipping
Condition: Used
Location: New Berlin,WI,USA
$
5,000
Buy It Now
Free Shipping
Condition: Used
Location: Waltham,MA,USA
EARLY B.C. AMES 8-3/8" LATHE. CATARACT STARK HARDINGE DALTON RIVETT ELGIN. This is an B.C. AMES, WALTHAM MASS. 8-3/8" X 21" PRECISION BENCH ... moreLATHE, 1900-1930. 32" long bed. I don't have a tool post or tail stock center. As far as I can see everything moves freely and operates properly. Please let the pictures help with the description and condition and view my other auctions for more LATHES and TOOLING. Insurance is included in the shipping price. Free local pickup always welcome. I can most likely get you a better shipping price than Ebay's shipping calculator by using a different shipper. Give me a call with your zip code at 401-330-9303 thanks, Bill. Check my feedback, satisfaction guaranteed and will combine ship when possible. I have this advertised locally and reserve the right to end the auction at any time.
$
700
Buy It Now
$15 Shipping
Condition: Used
Location: Oregon,OH,USA
$
1,999.99
Buy It Now
Free Shipping
Condition: Used
Location: Watertown,CT,USA
Hardinge HC Chucker Operator?s Manual Hardinge HC Chucker Maintenance Manual This offering is for a copy of the Maintenance Manual for the Hardinge HC ... moreSuper-Precision Chucking Machine. See the pictures for an idea of the shape and condition of this item. The condition of the original manual is very good. All pages appear to be present. Expect some handwriting and grease smears. Both covers are present with minor wear around the edges. Approximately 40 pages. Note that this is a copy of the manual. We have a large library(thousands) of manuals. We would be glad to help you look for that hard to find manual. Please ask. Shipping Weight: 12 ounces After your purchase. You may perform the checkout process immediately and ebay will send out an invoice. When purchasing multiple items, we would prefer to prepare the invoice so we can calculate the shipping cost based on a combined rate.
$
850
Buy It Now
$42 Shipping
Condition: Seller refurbished
Location: Cedar,MN,USA
$
14,500
Buy It Now
Free Shipping
Condition: Used
Location: Louisville,KY,USA
$
495
Buy It Now
$0 Shipping
Condition: Used
Location: Phoenix,AZ,USA
Hardinge 3.5" dovetail slide. I also have a Hardinge lathe listed that this could go with. Slide is in great working condition.
$
10,500
Buy It Now
Free Shipping
Condition: Used
Location: Minneapolis,MN,USA
HARDINGE HLV-H EM PRECISION TOOL ROOM LATHE WITH ACU-RITE DRO'S NOTE: WE ALWAYS COMBINED SHIPPING WHEN POSSIBLE! CALL 781-440-0983 FOR MORE INFORMATION ... moreAND SHIPPING
$
450
8d 19h 11m 55s
0 bids
$590 Now
$575 Shipping
Condition: Used
Location: Dayton,OH,USA
Up for AUCTION is the following item 1-Hardinge CH Lathe Control Levers in good working order. Please check my STORE for other listing I am currently ... moreselling over 200 Machinist Tools. We will ship for discounted freight rates on multiple item winners. Please email any question before bidding if you have them I will respond ASAP! ALL International Packages MUST ship PRIORITY MAIL INSURED no exceptions. Powered by
$
12,000
Buy It Now
$0 Shipping
Condition: Used
Location: Tucson,AZ,USA
Nice Used and Well Maintained Hardinge CHNC2 Lathe Machine This is a great used Hardinge CHNC II Machine that is fully functional. It holds a high tolerance ... moreof +/ 0.0002 and will make a great addition to any machine shop. We have run out of work for it and need to make room for a new mill. This lathe is working and has been maintained regularly in our shop(Tucson. AZ- Zip Code 85713) by highly experienced technicians. It is being sold as-is condition with no warranties or guarantees. However. It is good working condition with all parts and functions working properly. You are welcome to see it in our local shop if you can come to our Tucson, AZ location. You may also contact us via email and we will be more than happy to answer any questions that you may have. Unfortunately due the size of the machine- Local Pick Up Only! However. If the buyer wants to arrange pickup and/or shipping at their own cost, we will be happy to work with you to arrange the pick up. The buyer is to pay for ALL associated costs of the pick up and/or shipping.
$
3,450
Buy It Now
Free Shipping
Condition: Used
Location: Minneapolis,MN,USA
$
2,500
Buy It Now
Free Shipping
Condition: Used
Location: Boca Raton,FL,USA
$
3,500
8d 2h 27m 2s
0 bids
$0 Shipping
Condition: Used
Location: Oxnard,CA,USA
$
1,200
Buy It Now
$47 Shipping
Condition: Used
Location: Cedar,MN,USA
$
575
Buy It Now
$0 Shipping
Condition: Used
Location: Pennsburg,PA,USA
$
250
Buy It Now
$8.3 Shipping
Condition: Used
Location: Scranton,PA,USA
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! HARDINGE L20A ADJUSTABLE KNURLING TOOL HOLDER. A-1 Condition, NO RESERVE! This is a NO ... moreRESERVE auction for a used Hardinge L20A knurling tool holder. With 6 sets of knurls. Everything seems to be in very good cleaning. But a couple of the knurls may need a touch of cleaning. You should be able to see the sizes from the picture, and on the tool itself is a Reed SS-30 set. Get a deal on a nice knurling tool! Condition: Used See listing. andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: Fixed Shipping Charges. Shipping Carrier Domestic Usps Priority Mail Small Flat Rate Box $5.80 I will ship to: United States Customer Service Policy: Will combine with other items when possible. Items generally shipped immediately after payment. Occasionally if I'm out of town or if there is a storm, there may be a delay. a pretty image. templates with Vendio Sales Manager. Vendio provides powerful selling automation for sellers of all sizes. On May-07-14 at 20:17:06 PDT. Seller added the following information:
$
2,850
Buy It Now
$80 Shipping
Condition: Used
Location: Cedar,MN,USA
UN-USED… HARDINGE GEAR BRACKET Model: HLV-H Complete with three(3) Gears: 60T 55T 22T Approximate Weight: 3 Lbs PRICE: F.O.B. Odessa. Florida…$350.00(Plus ... moreany applicable taxes.
$
1,695
18h 22m 24s
0 bids
$0 Shipping
Condition: Used
Location: Temecula,CA,USA
Up for AUCTION is the following item 1-Hardinge CH Lathe Control Levers in good working order. Please check my STORE for other listing I am currently ... moreselling over 200 Machinist Tools. We will ship for discounted freight rates on multiple item winners. Please email any question before bidding if you have them I will respond ASAP! ALL International Packages MUST ship PRIORITY MAIL INSURED no exceptions. Powered by
$
6,500
Buy It Now
$0 Shipping
Condition: Used
Location: Oxnard,CA,USA
$
359.28
Buy It Now
$0 Shipping
Condition: Used
Location: Noblesville,IN,USA
Up for sale are these Hardinge 5C Collets 10 Pcs 1/64-7/16 various sizes.
$
1,200
Buy It Now
$0 Shipping
Condition: Used
Location: Livonia,MI,USA
Untitled Document Free. Fast Shipping Every Business Day! Hardinge DV59 Precision Lathe and DSM59 Second Operation Machine Parts Manual Click for Our ... moreComplete Catalog Manual Description: Number of Pages: 15 This is a reproduction. Not a photocopy, of an original Hardinge DV59 Precision Lathe and DSM59 Second Operation Machine Parts Manual. This manual contains a complete set of crossection part diagrams with descriptions. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed.
$
7,400
Buy It Now
Free Shipping
Condition: Used
Location: Chatsworth,CA,USA
$
2,500
Buy It Now
Free Shipping
Condition: Used
Location: Huntington Beach,CA,USA
$
5,000
Buy It Now
$3,000 Shipping
Condition: Used
Location: Barberton,OH,USA
$
3,650
Buy It Now
$0 Shipping
Condition: Used
Location: Anaheim,CA,USA
$
650
Buy It Now
$17 Shipping
Condition: Used
Location: USA
$
300
Buy It Now
Free Shipping
Condition: Used
Location: Johnson City,NY,USA
$
3,500
Buy It Now
Free Shipping
Condition: Used
Location: New Britain,CT,USA
$
12,000
Buy It Now
$0 Shipping
Condition: Used
Location: Souderton,PA,USA
ebay template HARDINGE CONQUEST T51 CNC Slant Bed Chucker Lathe& Bar Machine with Live Tooling made in USA I TEM S OLD A S P ICTURED This machine ... morehas the power. Torque, and rigidity to do heavy roughing operations and the ability to turn right around and put on low micro-inch finishes without grinding. The 45-degree slant bed angle permits a large swing diameter over the way covers. Easy access to the spindle area, and optimum chip removal from the machining area. This Hardinge cnc lathe is an amazing live tool machine with a 2½" bar capacity. Big-Bore" 25C spindle option installed and 22-7/8" maximum turning distance. Powered by a 20-hp motor, this machine reaches a maximum speed of 4,200 rpm with a quiet spindle and is in very good working condition with smooth ways and travels. Please call for more details and information. Ask for Jerad(818) 718-6734 FEATURES Live Tooling capabilities Parts Removal System Option Installed 8" Diameter Power Jaw Chuck 2½" bar capacity"Big-Bore" 25C spindle 12 Station Turret Heavy Duty Linear Guide Ways Programmable Tailstock GE Fanuc 18-T Control with conversational programming Chip Conveyor System INCLUDES Manuals Various Live Toolholders SPECIFICATIONS Hole Through Spindle 2½" Spindle Drive 20 HP Torque Rating 200 ft-lb Speed Range 50 to 4200 prm Max. Swing Over Z-Axis Way Cover 26" Max. Swing Over Tailstock Dovetail Bed 19.5" Max. X-Axis Travel 6¾" Max. Z-Axis Travel 22.625" Max. Distance from Spindle Face to Turret Face 23.120" Max. Turning Diameter with Standard Qualified 1" Square Shank Tool 10.437" Live Tooling Holders(Speed Range in 1-rpm steps) up to 3.000 rpm Morse Taper Center MT No. 4 Max. Distance from Spindle Face to Tailstock 28.03" Max. Turning Distance 22.625" Max. Tailstock Travel 19" Machine Dimensions 111" x 69" Machine Height 71" Machine Weight 15.000 Lbs. Specifications subject to verification INSPECTION NOTES: As with any piece o
$
1,195
Buy It Now
$0 Shipping
Condition: Used
Location: Fort Lauderdale,FL,USA
New Old Inventory" Hardinge 16C 3" Extra Depth Closer for A2-5 CHNC CNC Lathe Spindle.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-143219de371-0xde-
$
3,300
Buy It Now
$0 Shipping
Condition: Used
Location: Oxnard,CA,USA
$
11,500
Buy It Now
$0 Shipping
Condition: Used
Location: Greene,NY,USA
Preowned HARDINGE Conquest Super Precision CNC Lathe. Model: CS-42, S/N: CS-1103-C-SP(New 1990) Maximum swing over upper way cover Maximum swing over ... morelower way cover Spindle bore Thru-collet capacity(Type 16C collet- 1.625" Cap. X-axis travel Z-axis travel Maximum square shank tooling capacity Maximum turning diameter with 3/4" square shank tool(1-1/4" head) Maximum X-axis traverse rate Maximum Z-axis traverse rate Spindle nose. American Standard, size Spindle speed range. Infinitely variable Maximum allowable weight on spindle(including workholding device) Maximum distace from spindle face to turret face Maximum distance between centers Maximum live tooling speed Maximum tailstock travel Tailstock rapid traverse rate Tailstock spindle taper 19.5" 14.5" 1.875" 1.625" 5.45" 13.65" 3/4" 9.1" 472 I.P.M. 630 I.P.M. A2-5" 50-5.000 R.P.M. 75 Lbs. 14" 13.8" 4.000 R.P.M. 11.5" 300 I.P.M. 3 Morse Equipped With#OT-C FANUC two-axis CNC control with RS-232 port Live tooling option with(7) tool holders(model#s: CS-54[3] CS-52, CS-50[2] CS-36) 10) Station bi-directional turret with(6) I.D. and(9) O.D. tool holders Hydraulically actuated tailstock Linear guideways for the X and Z axis movements of the turret and tailstock 6.5" Diameter POWERHOLD three-jaw chuck 12' Capacity HARDINGE Har-Matic hydrodynamic retractable bar feed system with(4) guide tubes Parts catcher#F600 ROYAL PRODUCTS filtermist Coolant system Hydraulic system with.75 H.P. pump motor 10 H.P. AC spindle drive Machine is wired for 230 volt operation. Approximate Weight(Machine Only) 7.500 Lbs. Approximate Dimensions(Machine Only) 85" L-R x 69" F-B x 68" High, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
$
25,250
Buy It Now
$0 Shipping
Condition: Used
Location: Granger,IA,USA
$
3,750
Buy It Now
$0 Shipping
Condition: Used
Location: Southampton,PA,USA
$
450
Buy It Now
$40 Shipping
Condition: Used
Location: Grosse Pointe,MI,USA
Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping ... moremay be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
$
7,900
Buy It Now
Free Shipping
Condition: Used
Location: Brooksville,FL,USA
HARDINGE CONQUEST 42 CNCTURNING CENTER MAXIMUM SWING OVER UPPERWAY COVER- 19.5" MAXIMUM SWING OVER LOWERWAY COVER- 14.5" MAXIMUM DIST. SPINDLEFACE ... moreTO TURRET FACE- 14.0" MAXIMUM DIST. SPINDLE TOTAILSTOCK- 17.5" MAXIMUM X-AXIS TRAVERSERATE- 472 IPM' MAXIMUM Z-AXIS TRAVERSERATE- 630 IPM TURRET INDEXING TIME.STATION TO STATION- 5 SECONDS HOLE THROUGH SPINDLE-1.875" SPINDLE SPEED- 50 TO5000 RPM SPINDLE MOTOR- 10HP EQUIPPED WITH FANUC OT CONTROL PARTS CATCHER TAILSTOCK COOLANT SYSTEM TURBO CHIP CONVEYOR TOOL BLOCKS LIVE TOOLING TOOLHOLDERS MACHINE IN GOOD WORKING ORDER EXCEPT FOR DRAW TUBE IS STUCK IN SPINDLE. IF YOU HAVE THE TIME TO REPAIR YOU WILL HAVE AN EXCELLENT MACHINE. PLEASE CALL ALEX@864-879-4719 FOR MORE PICTURES AND INFORMATION ABOUT THIS MACHINE. THANKYOU FOR LOOKING.
$
11,500
Buy It Now
$0 Shipping
Condition: Used
Location: Huntington Park,CA,USA
$
21,000
Buy It Now
$0 Shipping
Condition: Used
Location: New Berlin,WI,USA
$
7,950
Buy It Now
$0 Shipping
Condition: Used
Location: Holland,OH,USA
$
399.99
Buy It Now
$18.87 Shipping
Condition: Used
Location: Nashville,TN,USA
$
400
Buy It Now
Free Shipping
Condition: Used
Location: Nashville,TN,USA
$
1,500
Buy It Now
$0 Shipping
Condition: Used
Location: Ferndale,WA,USA
$
3,950
Buy It Now
Free Shipping
Condition: Used
Location: Louisville,KY,USA
$
208.27
Buy It Now
$49.98 Shipping
Condition: Used
Location: United Kingdom
$
749
Buy It Now
$42 Shipping
Condition: Used
Location: Cedar,MN,USA
HARDINGE DV-59 OR DSM-59 TAIL STOCK IN GREAT SHAPE TAILSTOCK.
$
850
Buy It Now
Free Shipping
Condition: Used
Location: Cedarburg,WI,USA
$
2,950
Buy It Now
$0 Shipping
Condition: Used
Location: Pasadena,CA,USA
$
225
Buy It Now
Free Shipping
Condition: Used
Location: Sicklerville,NJ,USA
$
699.99
Buy It Now
$49.99 Shipping
Condition: Used
Location: Lombard,IL,USA
1 2 3 4 5 6 7 8 9 10 11
 In 

Past Items  
 
YOU ARE BIDDING ON ONE USED HARDINGE EXPANSION COLLET 3/4" GOOD CONDITION Powered by The free listing tool. List your items fast and easy and manage your active items.
Hardinge 5C 13/32" Collet Round Grip Item is in Good Condition. This Listing is for(1) Hardinge Collet USED. ShelfP34 Bin246 Box1 041330GB/JB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of your item at it's ACTUAL purchase price. It is against ... morefederal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13e1583746e-0xf9-
SquareTrade © AP6.0 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A HARDINGE 1-11/16" DIA 22J COLLET THIS COLLET IS IN GREAT CONDITION WE ALSO HAVE OTHER HARDINGE 22 J COLLETS LISTED, OR WILL BE LISTING. Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL US AT 937-672-9876. Be sure to add me to your favorites list! THREADS.
Up for Bid is a Lot of 5 pcs MSC. Hardinge and Royal Brand 5C Square Lathe Collets! They are in very nice condition. Here is a list of what is included: 3/4. 5/8, 3/8, 1/4 and 5/16 I will provide a 14-day money back guarantee. Please do not ask me to split up this lot. I want to sell them all together. Exactly how they are listed.
Hardinge 5C 7/16" Collet Round Grip Item is in Good Condition. This Listing is for(1) Hardinge Collet USED. ShelfP34 Bin247 Box1 041330GB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of your item at it's ACTUAL purchase price. It is against ... morefederal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
Description 2 Hardinge Collet Pads S15(1 1/32" S10(29/64" Payment Payment must be made within 3 days of purchase. To pay by Visa/MC please call 973-610-2326. Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement equipment. construction equipment.and more. We are committed to 5-star ... moreservice. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
YOU ARE BIDDING ON ONE USED MINT HARDINGE 5C EMERGENCY STEP CHUCK 2" FIRST BORE IS 2" X.150 DEEP SECOND BORE IS 1.870 X.440 DEEP EXCELLANT CONDITION CLOSER NOT REQUIRED Powered by The free listing tool. List your items fast and easy and manage your active items.
Hardinge TT tap collet holder.194 Qty1 No combined shipping and handling discount
DESCRIPTION: 22 COLLET HARDINGE 1" ROUND FOR AUTOMATICS AND SCREW MACHINES USED BUT APPEARS TO BE IN GREAT SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. The item must be received ... moreback in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, C
Hardinge 5C 19/32" Collet Round Grip Item is in Good Condition. This Listing is for(1) Hardinge Collet USED. ShelfP34 Bin246 Box2 041330GB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of your item at it's ACTUAL purchase price. It is against ... morefederal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
Lot of two(2) original Hardinge 52SC collets. Sizes are 1/4" and 5/16" Threads and keyway are in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
YOU ARE BIDDING ON ONE USED HARDINGE 5C EXTRA DEPTH EMERGENCY STEP CHUCK 2" 2.120 X 1.026 DEEP EXCELLANT MACHINING COLLET CLOSER NOT REQUIRED Powered by The free listing tool. List your items fast and easy and manage your active items.
Hardinge Knurling Tool T8 5/8" DV-59 DSM59 Good shape overall Blackoxide discolered in spots Thanks for looking No combined shipping and handling discount
Hardinge Sjogren Speed Collet Chuck 2J With L-0 Tapered Spindle Mount Excellent Condition Works Great
YOU ARE BIDDING ON ONE MINT HARDINGE 3" EXTRA DEPTH EMERGENCY STEP CHUCK 2.970 X.212 DEEP CLOSER REQUIRED Powered by The free listing tool. List your items fast and easy and manage your active items.
This Sale is for ONE used HARDINGE SJOGREN USA SJOGREN 2J SPEED COLLET D1-6 COLLET CHUCK with one collet( the collet did not come with th echuck but i had one so I am including it. The collet has some rust on its top edge but is otherwise good.see pic. ITEM NO. b) This chuck has the usual nicks and dings from use but is ready for more.The black ring that turns also has some cracks and chips but this in no way affects use. Have a look. The outside wheel turns smoothly and tightens the collet properly. Could use an oiling and polishing otherwise ready to go.A very expensive tool. 2J collets will hold much larger work pieces than the usual 5c collet chucks. A scale shown is for size reference only and not part of sale. Thank you for looking. We ship Wednesday through Friday and are happy to combine orders for shipping costs. Please check my ... moreother sales& auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items cross the border. These are the sole responsibility of the buyer. have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We accept PAYPAL for sales within north America. All items shipped to the US are sent by courier(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping rates listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors a
NUMBER OF Items 6(one of each) R8 Round Smooth Collet sizes 2 each of 1/2. 5/16, 3/4, 3/16 Only One 1/2 size collet has"Hardinge" Printed on it Up date 5/8 is now gone System of Measurement Inch Name which size you want Each New List Price: $40.00+ USD Picture above is a stock photo
Hardinge-Sjogren 2A D3 Speed Collet Chuck. D1-3 Mount. Sat on a shelf for years.
Listing is for one each Total items 5 ea Hardinge 3J Collet RD 3/8. 5/8, 1-5/16,15/16 Name which size you want. 1-3/4 now gone New List Price: $92.50 USD Above picture is stock photo
GEOMETRIC 3/16 EJ DIE HEAD W/5/8" SHANK*XLNT*HARDINGE DV-59 DSM-59, GEOMETRIC"EJ" 3/16" DIE HEAD WITH 5/8" SHANK TENSION ONLY. EXCELLENT CONDITION AS SHOWN. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $10.00 USPS Priority Mail® Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
HARDINGE/BROWN& SHARPE 5/64" ROUND#10Y EXTENDED NOSE COLLET. F28129 This item is in GOOD CONDITION. PAYMENT: Payment is due at time of purchase. PAYMENT TYPE: Pay Pal. CONFIRMATION: A UPS tracking number will be available via email. SHIPPING: Items will be shipped using UPS. Shipping DISCOUNTS can be given on multiple items purchased within the same time frame. DELIVERY: Item will be shipped upon confirmation of payment. FEEDBACK: Feedback will be given after item has been shipped. WARRANTY: 14 Days. 100% purchase price return privilege. Buyer will be responsible for all shipping costs. Your 100% satisfaction guaranteed. If you are looking for a specific item to bid on please let us know. THANK YOU* Check out my!
HARDINGE#3 COLLETS. 4 PCS. TOTAL. 9/32" ROUND, 13/32" ROUND, GOOD CONDITION* 15/32" ROUND, 21/64" ROUND, FAIR CONDITION* C15107 This item is in FAIR TO GOOD CONDITION. PAYMENT: Payment is due at time of purchase. PAYMENT TYPE: Pay Pal. CONFIRMATION: A UPS tracking number will be available via email. SHIPPING: Items will be shipped using UPS. Shipping DISCOUNTS can be given on multiple items purchased within the same time frame. DELIVERY: Item will be shipped upon confirmation of payment. FEEDBACK: Feedback will be given after item has been shipped. WARRANTY: 14 Days. 100% purchase price return privilege. Buyer will be responsible for all shipping costs. Your 100% satisfaction guaranteed. If you are looking for a specific item to bid on please let us know. THANK YOU* Check out my!
HARDINGE/BROWN& SHARPE#10 ROUND COLLETS. 9 PCS. TOTAL, 1/16" 5/64" 9/64" 5/32" 3/16" 7/32" 5/16" 11/32" 13/32" B051020 This item is in GOOD CONDITION. PAYMENT: Payment is due at time of purchase. PAYMENT TYPE: Pay Pal. CONFIRMATION: A UPS tracking number will be available via email. SHIPPING: Items will be shipped using UPS. Shipping DISCOUNTS can be given on multiple items purchased within the same time frame. DELIVERY: Item will be shipped upon confirmation of payment. FEEDBACK: Feedback will be given after item has been shipped. WARRANTY: 14 Days. 100% purchase price return privilege. Buyer will be responsible for all shipping costs. Your 100% satisfaction guaranteed. If you are looking for a specific item to bid on please let us know. THANK YOU* Check out my!
5/16" GEOMETRIC DSA THREADING DIE HEAD W/CHASERS 5/8" ADJ SHANK HARDINGE, GEOMETRIC 5/16" DIE HEAD. DSA MODEL WITH ADJUSTABLE SHANK TO COMPENSATE FOR ANY SPINDLE TO TURRET MISALIGNMENT. HEAD HAS NEW SPRINGS AND WORKS AS IT SHOULD. INCLUDES FOLLOWING CHASERS 0-80. 2-56, 3-56, 4-48, 4-40, 6-32, 8-32. IF THERE IS ANOTHER SIZE CHASER SET YOU NEED AND WE HAVE IT, WE WILL INCLUDE NO CHARGE. OTHERS ALSO AVAILABLE. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
Description 3 Hardinge S26 Collet Pads Sizes: 1 3/16" 1 3/16" 3" Payment Payment must be made within 3 days of purchase. To pay by Visa/MC please call 973-610-2326. Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement equipment. construction equipment.and more. We are committed ... moreto 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
Inventory Number: 03130760044 Manufacturer: Description: 24 MIXED HARDINGE OVERSIZE DAVENPORT FEED FINGER COLLET LOT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 24 PIECE MIXED LOT AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction ... morelistings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown, but may
Inventory Number: 03130760045 Manufacturer: Description: 40 MIXED HARDINGE OVERSIZE DAVENPORT FEED FINGER COLLET LOT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 40 PIECE MIXED LOT AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction ... morelistings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown, but may
Hardinge 5C 3/4" Collet Round Grip Item is in Good Condition. This Listing is for(1) Hardinge Collet USED. ShelfP34 Bin246 Box2 041330GB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of your item at it's ACTUAL purchase price. It is against federal ... morelaws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
Hardinge 5C 11/16" Collet Round Grip Item is in Good Condition. This Listing is for(1) Hardinge Collet USED. ShelfP34 Bin246 Box2 041330GB/JB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of your item at it's ACTUAL purchase price. It is against ... morefederal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
Hardinge 5C 1/4" Collet Round Grip Item is in Good Condition. This Listing is for(1) Hardinge Collet USED. ShelfP34 Bin246 Box2 041330GB/JB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of your item at it's ACTUAL purchase price. It is against ... morefederal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
Set of 6 Hardinge R-8 collets. Sizes 1/8" 3/8" Qty 2) 1/2" 9/16" and 5/8" All in very nice condition
Set of 11 Metric R-8 collets. Hardinge brand: Sizes 4.5(Qty 2) 8 122, 14 and 16 MM SPI Brand- Made in Germany Sizes 8.10,20 MM Unmarked for brand or country of origin 18 MM- minor damage on nose All in very nice condition
aims 10 HARDINGE 5C EMERGENCY COLLETS- E& E2 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the USA by Hardinge These are 10 Hardinge 5C Emergency Collets in good condition. Specifications: Collet Type: 5C Emergency. Sizes: E& E2. OAL: 3-3/8" Approx) Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 10 HARDINGE 5C EMERGENCY COLLETS- E& E2 Reliable Tool Inc. c 2011 | Powered by
aims 7 HARDINGE 5C EMERGENCY COLLETS- EN2& EN1 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the USA by Hardinge These are 7 Hardinge 5C Emergency Collets in good condition. Specifications: Collet Type: 5C Emergency. Sizes: EN1& EN2. OAL: 3-3/4" to 4-1/4" Approx) Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 7 HARDINGE 5C EMERGENCY COLLETS- EN2& EN1 Reliable Tool Inc. c 2011 | Powered by
1pc- 6" Hardinge Sure-Grip 3-Jaw Power Chuck with an A2-5 Spindle Nose(Serrations are 1/16" x 90 Deg. Model#C-306 Serial#AK1094 1 Set- 3 Serrated Hard Jaws. One jaw has been cut down. See photos for clarification 1 Set- 3 spindle mount bolts. not shown in photos. Condition is used. There are some scracthes and gouges on the face of the chuck, see photos for clarification. however the chuck functions perfectly. The drawbar pulls very smoothly. Retail on a similar hardinge chuck on shophardinge.com is $5340, the hard jaws are around $300 new.
1pc- 6" Powerhold 3-Jaw Power Chuck with an A2-5 Spindle Nose(Serrations are 1/16" x 90 Deg. Model#6.5H-3-A5FS 1 Set- 3 Serrated Hard Jaws 1 Set- 3 Jaw t nuts 1 Set- 3 spindle mount bolts. not shown in photos. Condition is used. There are some scracthes and gouges on the face of the chuck, see photos for clarification. however the chuck functions perfectly. The drawbar pulls very smoothly. Retail on this chuck is over $4000, the hard jaws are around $300 new.
Gently used Hardinge TT5/8 tapping head. This has a 5/8 staight shank. It comes with a.141 collet. Nice tool.
HARDINGE HDC-10 REDUCER BUSHING 1-1/4" O.D. SIZE: 1/2" Used condition. As pictured. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. $7.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
STAR SINE COLLET CHUCK INDEXER W/HARDINGE 3AT COLLETS*SUPERB*HARIG GRINDALL, STAR COLLET SINE CHUCK INDEXER. 12 DIVISION INDEX, DEGREES, MINUETS AND SECONDS ON VERNIER, HARDINGE 3AT COLLETS 1/16-1/2 EXCEPT 5/16" SUPERB CONDITION AS SHOWN, SMOOTH OPERATION. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Calculated US Shipping Enter ZIP Code and click button to see prices: UPS Ground Other Shipping Options $0.00 USPS First-Class Mail® Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
This is for a maintanence manual for a Hardinge tool room lathe. Model HLV-H. 52 pages in excellent condition. It is an original manual, not a copy. Free media mail shipping to all 48 continental US states. Thanks for looking and check out my other Ebay auctions!
4" chuck Hardinge Quest GT27SP Gang Style CNC Turning Center(2003) Specifications Bar Size: 1.062" 27mm) Chuck Size: 4" 100mm) Spindle Speed: 8.000 RPM, X-Axis Travel: 11.96" 304mm) Z-Axis Travel: 11.062" 281mm) C Axis: 360.000, Tool Shank: 0.500" Square/Rotary) Tool Shank: 0.750" Round) Main Motor Drive: 5 HP, Equipped With: Fanuc 21iT CNC Control. C Axis Contour Milling, 16C Collet Chuck, 000010"00010mm Resolution Control, Custom Macro B, Rigid Tapping. Run Time Parts Counter, Headwall Coolant, SP Certification, Laser Ball Bar Tested Dynamic Balanced Spindle and Drive Motor, Harcrete Polymer Composite Base, Full Machine Documentation, Part Chute, 1) Extra Top Plate with Holders, M Function Air Blasts@ Bulkhead and Cross slide, Machine being sold As Is. Where Is. Buyer is responsible for shipping and ... moreloading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
This is a replaceable turret top plate for a Hardinge CHNC CNC lathe. It is is 8" across the flats. It is in good condition except for the one station in the second picture. All shipping is by USPS Medium Flat Rate Box. Shipping to US addresses is $12.95. Use the shipping calculator for all international addresses. If you purchase any of my other listings. I will combine shipping on any of my listings. If you use Buy-It-Now you can buy the items without paying for them immediately. When you are done shopping, commit to buy the items but don’t pay for them. Then request a total invoice. I will adjust the shipping charges and send out an invoice. The same applies when you win the auction for multiple items. Ask for an invoice rather than pay right away. I will adjust the shipping charges and send out an invoice. See my listings for: Sunnen ... morehone tooling; Hardinge lathe parts& tooling; other machine shop tooling; marine& outboard motor parts and manuals; Famous Monsters of Filmland magazines from the 1970s’ National Lampoon magazines from the 1970’s. Mad Magazines and paperback books from the 60’s&b 70’s and other items. Please allow 2 days for me to respond to any questions. See my guarantee information and return policy below. Powered by The free listing tool. List your items fast and easy and manage your active items.
HARDINGE HLV-H SUPER PRECISION TOOLROOM LATHE S/N HLV-H-7213S BUILT 1978 SPECIFICATIONS: SWING OVER BED 11 in. SWING OVER CROSS SLIDE 6 in. DISTANCE BETWEEN CENTERS 18 in. SPINDLE 5C/ 4 º TAPER NOSE SPEEDS 125- 3000 VARIABLE TAILSTOCK 2 MT THREADING(27) INCH WEIGHT 1700 lbs. ELECTRICS 440/ 3/ 60 PRICE INCLUDES: NEWALL C-80 2-AXIS DRO· COOLANT SYSTEM· ALORIS BXA QUICK-CHANGE TOOLPOST& 5) HOLDERS· BUCK ZERO SET 6-in. 3-JAW CHUCK– OD JAWS ONLY· REAR SPLASHGUARD· ONE SHOT LUBRICATION TO WAYS· APPROX(64) 5C COLLETS– IMPORTED· DRILL CHUCK– ALBRECHT KEYLESS· LIVE CENTER- SKODA NEW SPINDLE REBUILD PRICE: $14.990 TERMS: DUE IN FULL PRIOR TO SHIPMENT F.O.B. FREMONT. CA(PREP& LOADING INCLUDED) NOTE: Machine was originally set up for 575 VOLTS. This machine has a trasnformer on it to run at 440V. If ... moreyou need 208-220. You need to buy an additional transformer. We recommend buying a new transformer that will run from 575V down to 208. You would just take off the one that brings the machine to 440V. Call with any questions. Call or email us with any questions. The machine can be seen under power in our Fremont. CA showroom. We can help with trucking quotes if need be. Thank you for viewing our listing. We have few other machines in our ebay store and more on our website: Sincerely, PERFORMANCE MACHINE TOOLS. P.510.249.1000. Email:
FREE USA SHIPPING! Hardinge Boring Bar Holder 5/8" Model L5 NICE! FREE USA SHIPPING!
You are bidding on(2) Used Hardinge CC-14 2" Extension Tool Holders. They are in good condition. Please email your questions. Dms1103@gmail.com I will combine shipping with my other auctions whenever possible.
You are bidding on(1) Used Hardinge CC-33-3/4 Triple Toolholder. It is in good condition. Please email your questions. Dms1103@gmail.com I will combine shipping with my other auctions whenever possible.
HARDINGE 1/2" RIGHT HAND EXTENSION TOOL HOLDER- HARDINGE 1/2" RIGHT HAND EXTENSION TOOL HOLDER INVENTORY# 4343 MODEL: CC-25R SPECIFICATIONS PART: PL 001 1625 R TOOLING CAPACITY: 1/2" RIGHT HAND SQUARE SHANK TOOL BITS DESCRIPTION THE EXTENSION HOLDER IS USED TO HELP BALANCE THE TOOL LENGTH IN A TURRET SETUP AND GIVE ADDITIONAL SUPPORT FOR 1/2" RIGHT-HAND SQUARE SHANK TOOL BITS THAT OVERHANG THE TURRET. IT CAN BE USED FOR FACING TURNING. BORING, CHAMFERING, OR THREADING OPERATIONS. KNOWN HARDINGE USAGES: CHNC/HNC GOOD CONDITION FOB OUR FLOOR CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION ... moreTO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. Allowing you to run multiple three phase motors off single phase power! DISCLAIMER: The information and pictures are believed to be accurate to the best of our knowledge. Obtained from sources deemed reliable. However, we do not guarantee accuracy of information and cannot be responsible for any errors or omissions. An inspection should be
You are bidding on(1) Used Hardinge CS-23 CNC Tool Holder. It is in very good condition. Please email your questions. I will combine shipping with my other auctions whenever possible. dms1103@gmail.com
You are bidding on(1) Used Hardinge CS-32 CNC Tool Holder. It is in very good condition. Please email your questions. I will combine shipping with my other auctions whenever possible. dms1103@gmail.com
Hardinge CL-54 End-Working Live/Revolving Tool Holder in great shape and spins freely. Often used on a Hardinge Conquest T51/T51SP or a T65 and others. Accepts a 180 Series double-angle collet(example: SG-180& SB-180 and others) Equipped with an end-cap to protect gear. 3000 RPM; 2.4 HP I have other Hardinge live tool holders[and static] available as well. If you have any questions please cal us a 262-895-3462 or email us at sales@mwmachinery.com Thanks for looking and be sure to visit our Ebay store for all of your metalworking solutions. Bid With Confidence! Check out my other Auctions by clicking View seller's other items l ink above. Or visit my e B a y Store! Our Web Site is displayed within our About m e Page above in the" Seller info" area above.
Aloris Tool Post and( 2)Tool Holders AXA1. Condition is excellent. Very little use.
Used Hardinge SB-2 toolholder bushings. 2 pcs) 5/8, 2 pcs) 3/4, 2 pcs) 1, 2 pcs) 1 1/8. All show signs of use, some more then others. NOTE: ALL MACHINERY/MERCHANDISE IS SOLD AS IS. WHERE IS WITH NO WARRANTY OR GUARANTEE. ALL MACHINE SAFEGUARDING AND OSHA REQUIREMENTS ARE THE RESPONSIBILITY OF THE BUYER. WE DO NOT MODIFY OR ALTER ANY MERCHANDISE THAT WE BUY OR SELL. IF BUYER RESIDES IN PA 6% SALES TAX IS CHARGED UNLESS TAX EXEMPT. ALL OUT-OF-STATE BUYERS PICKLING UP ITEM(S) MUST PAY PA SALES TAX(STATE LAW) International shipping is available for some areas. Please contact us for shipping cost. Import duties. Taxes, etc. are the responsibility of the buyer. ITEM LOCATION: VALLEY VIEW. PA 17983(SCHUYLKILL COUNTY)
Hardinge 3.5" dovetail slide. I also have a Hardinge lathe listed that this could go with. Slide is in great working condition.
One-Hardinge Operator's Manual for Model DV59 High Speed Lathe. Kinda Dirty and a little Oily but still completely ledgible. Check the pictures.
New Hardinge chucker lead screw. With follower nut. Several lead pitch available, 8 TPI to 64 TPI) Inquire.
These are three Hardinge 5V collets. 7/32. 1/2, 3/8 inch.
Inventory Number: 03130760072 Manufacturer: Description: 30 HARDINGE DAVENPORT BURR COLLET LOT. ROUND,HEX,SQUARE, 3/32 THRU 7/8" Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 30 PIECE MIXED LOT, AS SHOWN, SEE PICTURES, NOT A SET, SOME MISSING DUPLICATES OF OTHERS BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice ... moreto have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these it
Inventory Number: 03130760071 Manufacturer: Description: 30 HARDINGE DAVENPORT BURR COLLET LOT. ROUND,HEX,SQUARE, 5/64 THRU 3/4" Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 30 PIECE MIXED LOT, AS SHOWN, SEE PICTURES, NOT A SET, SOME MISSING DUPLICATES OF OTHERS BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice ... moreto have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these it
Inventory Number: 03130760070 Manufacturer: Description: 118 HARDINGE OVERSIZE DAVENPORT. O.S. DAV, COLLET FEED FINGERS, 1/4-13/16 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 118 PIECE MIXED LOT, AS SHOWN, SEE PICTURES, NOT A SET, SOME MISSING DUPLICATES OF OTHERS BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice ... moreto have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these i
NORTHFIELD 4" PRECISION AIR CHUCK FOR HARDINGE SERIAL NO. 454925 THE JAWS THAT COME WITH THIS CHUCK ARE ALUMINUM AND HAVE BEEN MACHINED TO 1.500" DIAMETER X 1-3/4" DP. THE OVERALL LENGTH OF THE JAWS IS 3"
UP FOR BIDS IS A 19pc MIXED LATHE COLLET SET. VARIOUS MANUFACTURERS: SOUTH BEND. HARDINGE, NEAL SKOKIE, BUCK& SOME ONLY LABELED"5C" THE COLLET HOLDER IS NOT INCLUDED IN THIS AUCTION! THE LI ST IS AS FOLLOWS: SOUTH BEND-7/8. 7/16, 3/8, 11/16 BUCK-1 1/16 HARDINGE-9/32. 3/8, 5/16, 1/2, 7/8, 5/32 NEAL SKOKIE-9/16. 1/8 5C-1" 1/2 HEX, 1/16, 1/4, 3/4, 1/4 CALIFORNIA BIDDERS MUST PAY SALES TAX.
Theres 19 brand new in the box and 26 used collets all made by HARDINGE.Various sizes and styles.These are all W&S NO 1 SIZE. Free shipping USA overseas 30.00 flat rate. Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
Theres 36 brand new in the box and 42 used collets all made by HARDINGE.Good stuff.Large assortment of sizes and types including round and square collets.Fractional and metric sizes the used collets I am not sure were ever used but i am calling them used since they arent in the original package.For the Bardons and Oliver lathes and machines. Free shipping USA overseas 30.00 flat rate. Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
THESE ARE ALL NO 10. IM CALLING THE 13 NOT IN THE ORIGINAL PACKAGE USED BUT THEY LOOK BRAND NEW ALSO.VARIOUS STYLES AND SIZES MOST NEW IN THE BOX.THERES LSO 6 STUB COLLETS.SUPER DEAL IF YOU CAN USE THESE.Free shipping USA overseas 30.00 flat rate. Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
Hardinge Carbide Lathe Bit RH 3/8" Part Off. Groove. Etc.0935 x 1/4" Near New Mill Oal 3 1/8" Sharpened.SPI 80-586-1" Micro100 Carb. Lg.7/8" Can be Sharpened Many Times BID WITH CONFIDENCE PLS. ASK? Before Bidding LAMAR ATKINSON 408 243 0726 6Days WE SHIP FAST PLEASE== SERIOUS BIDDERS ONLY PLS. ADD ME TO YOUR FAVORITES LIST S/H $
We are selling this 1998 Hardinge Cobra 42 CNC Lathe. It has Fanuc 21-T 32 Bit CNC Control w/ CRT. Extended Part Program Editing, 160M Part Program Storage, Multi-Repetitive Canned Cycles, Manual Pulse Generator Handwheel, Automatic Lubrication System, Coolant System, Turret, and Tailstock. The machine is in good condition. Buyer is respondsible for loading. E-mail me at CNCMachining90@comcast.net or through E-bay if you have an questions. Machine is being sold as is. Where is.
THIS IS A LEVER TAILSTOCK FOR FRILLING ON A HARDINGE DV-59 IN REAL GOOD CONDITION. I DO HAVE STANDARD& 6 POSITION TURRET TAIL STOCKS AND OTHER HARDINGE ATTACHMENTS AND TOOLING,SEE MY OTHER LISTING FOR HARDINGE SPEED LATHES,HLV-H TOOLROOM LATHE AND DV-59 APPROXIMATE SHIPPING WEIGHT:`33 LBS. 14 X 8 X 12 WE SHIP UPS OR USPS FLAT RATE WHEN AVAILABLE. FOR SHIPPING QUOTES CALL TINA@ 727-362-8318. ALL OTHER QUESTIONS CONTACT GERRY VIA EMAIL OR 727-547-0616. BUYER PAYS ACTUAL SHIPPING FROM 33782. LOCAL INSPECTIONS AND PICKUPS WELCOME. I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the ... moreitem and the shipping. And the item is shipped, YOU. The BUYER. Are now responsible, along with the shipping service provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges. Such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 41 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Bid with confidence! On Dec-22-11 at 09:55:08 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Up for sale is a Hardinge AHC-21 bar holder with hold down bolt. 5/8" bar hole. Sorry. I can only ship to lower 48. USA
We Have Thousands Of Machine Manuals. Instruction Manuals. Machinery Maintenance Manuals. Parts list. Service Manuals. Machinery Brochures And Schematics For Sale. We Are Proud To Provide Service To The Metalworking. Chip Making and Fabricating Machine Tool Manual Needs. We Take Great Pride In Getting You The Correct Manual For Your Machine. Let Us know Your Serial Number. And Model Number. We Guarantee That We Will Get You a Correct Manual or Your Money Back! Each Manual Is Comb Bound For Easy Reading On A Flat Surface Such As a Table or Workbench. We Have Collected These Manuals Over Many Years And Continue To Look For More Every Day. Our Customers Have Been Pleased With Our Manuals. Schematics, Parts List, Service Manuals, Maintenance Manuals, Instructions Manuals And Brochures. They Are Filled With Invaluable Information, Sometimes Not ... moreEven Available Direct From The Manufacturer. We Are Often The Last Resort. We Take Pride In This Fact. We Are Here To Fulfill Your Industrial Machinery Manual Needs Today. Email Us Today! Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Industrial Machinery Manuals Is Proud To Offer 1 Digitally Enhanced Quality Bound Copy Of A: Hardinge Model DSM59 Second Operation Lathe Machine. Parts List Manual This Manual Covers Models: DSM59 This Manual Includes: I.M. Inventory# H-105SB Parts List Functional Illustrated Diagrams Showing Component Identification This Manual Has 14 Printed Pages. We Ship Domestically via USPS First Class or Priority Mail ABSOLUTELY FREE! Delivery Time Usually 1-5 Days. If You Need a Product Faster. Please View The Shipping Calculator Below For Options. Other Options: UPS Overnight Next Day Air. UPS 2 nd Day Air. All Thing
WELCOME TO THE IAR Discount Industrial Equipment& Supplies, | | | | | Product Categories, Shop Pages, | | | | | | | PRODUCT DESCRIPTION, IAR Stock# 2998 Condition Used-Excellent. Qty of Lots 3 Items In Lot 1. Location 1620. HARDINGE 32 PITCH STEEL LEAD SCREW U Make: HARDINGE. Model: 32 PITCH. SPECIFICATIONS- See Tech Spec tab for more details. Size: 2in. Width: 1.90-2.40in. Type: Screw. Weight(Lbs) 2. Shipping dimensions(L in) 2.5(W in) 2.5(H in) 2.5. Calculated Shipping Tech Spec HARDINGE 32 PITCH STEEL LEAD SCREW. Compliance Comming Soon. HARDINGE 32 PITCH STEEL LEAD SCREW U.
1997 Hardinge Cobra 42 w/ Fanuc 21-T control. 16C collet nose& tailstock, Click to View Image Album Click to View Image Album Click to View Image Album Good used Hardinge lathe still installed in the original owner's shop so you are welcome to test operate it. Complete w/ 16C collet nose. Tailstock. Always run on oil coolant. This machine and the others from this shop were run by intermitently on a single 40 hour shift. Low run time and excellent condition. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We prefer to ship via UPS as we have daily pickup which offers a much lower rate then ... morecounter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. two. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR. Formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed is incorrect. eBay
Set if two hardinge lathe ball bearing centers and one hardinge lathe tool holder. I say used but barely used. Maybe a few times. The big one is almost 7 inches long with a three inch next. The small one is 6 inches long with a 1 1/2 inch neck. I don't see and mfg number but every item in this auction says Hardinge. Big ball bearing center in original box. Retail on this is way over asking price. Please check our feedback on Machinest items as everybody loves our prices. Posted with
SOUTHEASTERN TOOLING IS PROUD TO OFFER FOR YOUR CONSIDERATION: BAR STOCK PULLER FEED FINGER COLLET#22 RECTANGLE HOLDING HARDINGE 5/8" X 1" BACK BEARING DIAMETER 1.300" OVERALL LENGTH 6.000" THREAD 1.185"20LH USED BUT APPEARS TO BE IN GREAT SHAPE Inventory Item#5605 Please browse our store and other listings if you have any questions feel free send me a message.New items arriving daily; so if you don't see what you want. Check back. WE GLADLY COMBINE SHIP; Except Auction Items. TERMS and CONDITIONS IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. Please wait for an invoice prior to making a payment. We try to describe every item the best that we can. Although we do have experience in the tooling industry ... morewe don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do combine shipping on everything; Except Auction Items. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a cashiers and company checks. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangemen
Up for bid is a machinist’s Jacobs Chuck No. 32 with a capacity of 0" to 3/8" with a key in very good condition. 5/8" Shank. Made in USA. Ebay message me if you have any questions. Thanks for looking!
This is a Hardinge Sjogren lathe collet speed chuck for a D1-3 camlock spindle. Plus a set of 21 Hardinge 2J collets from 1/8" to 1-3/8" by sixteenths. Good used working condition. Buyer pays actual shipping only for a package approximately 10"x10"x12" and 32 lbs. No additional packing or handling charges. I can sell and ship only within the US.
Used set of Hardinge 4c collets. Sizes are 1/8. 11/64, 1/4(3) 5/16(3) 3/8, 7/16, 1/2, 5/8. One of the 1/4's and 5/16's and the 5/8 is not Hardinge. 12 collets in all. This auction is for the lot of 12.
HARDINGE CROSS SLIDE MODEL E RISER& D6 MULTIPLE TOOL HOLDER INCLUDED Very good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. Buyer pays actual shipping cost. Thanks for looking!
This is a used horizontal/vertical 5C Collet holder. There is no damage that I can see and it actually looks barely used. It was made in Taiwan and looks like good quality. I'm including one 5C collet. Please see the pictures for more information. Priced cheap, get it while you can! FREE PRIORITY MAIL SHIPPING INCLUDED! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS ... moreand UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
LOTS OF AUCTIONS ONLINE NOW! Brand Neatro Packaging In Box Condition Excellent Quantity 12 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
This is a used vintage HARDINGE H-4 5C Collet holder/ indexer. There is no significant damage that I can see that would effect performance but I cant get the indexer part to rotate for some reason. I think it just needs lubing because otherwise it all looks good, the collet screws in ok(one 1" hardinge collet is included) I don't have time to play with it so I'm offering it for quick sale. Please see the pictures for more information. FREE PRIORITY MAIL SHIPPING INCLUDED! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY ... moreSHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, C
Search Titles and Descriptions Categories Policies Gallery KDK TOOLS#KDK-119 QUICK CHANGE 5C COLLET BAR/ HOLDER + 3/4" HARDINGE COLLET KDK TOOLS#KDK-119 QUICK CHANGE 5C COLLET BAR/ HOLDER + 3/4" HARDINGE COLLET KDK TOOLS#KDK-119 QUICK CHANGE 5C COLLET BAR/ HOLDER + 3/4" HARDINGE COLLET KDK TOOLS#KDK-119 QUICK CHANGE 5C COLLET BAR/ HOLDER + 3/4" HARDINGE COLLET We also have a KDK-105 Master Bar for Boring Bars on Auction! Please Check Our Store. Specifications Allows instant change to threading. Internal grooving, drilling! Quick change from center drilling to tapping. Assures the simplicity of KDK Preset Quick Change Tools to all 5C collet jobs! Includes Collet: 3/4" Item comes as shown. Copyright c 2012 Bid On Industrial. Powered by
Not 100% sure about what this fits. But I have been told it fits. Hardinge HLV/TFB/DV59 lathes.
DESCRIPTION: 10 COLLET HARDINGE 7/16" ROUND FOR AUTOMATICS& SCREW MACHINES USED BUT APPEARS TO BE IN GREAT SHAPE. WE OFFER COMBINED SHIPPING SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back ... morerefund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo
DESCRIPTION: 10 COLLET HARDINGE 5/16" ROUND FOR AUTOMATICS& SCREW MACHINES USED BUT APPEARS TO BE IN GREAT SHAPE. WE OFFER COMBINED SHIPPING SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back ... morerefund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo
Here is a Vintage 5/8" Hardinge lathe 1J Collet in great condition. I answer all questions. Good Luck!
Here is a Vintage 1/4" Hardinge lathe 1J Collet in great condition. I answer all questions. Good Luck!
Here is a Vintage 3/8" Hardinge lathe 5C Collet in great condition. I answer all questions. Good Luck! 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13e541446a6-0xf8-
DESCRIPTION: 10 COLLET HARDINGE 7/32" ROUND FOR AUTOMATICS& SCREW MACHINES USED BUT APPEARS TO BE IN GREAT SHAPE. WE OFFER COMBINED SHIPPING SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back ... morerefund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo
DESCRIPTION: 10 COLLET HARDINGE 25/64 ROUND FOR AUTOMATICS& SCREW MACHINES USED BUT APPEARS TO BE IN GREAT SHAPE. WE OFFER COMBINED SHIPPING SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. ... moreThe item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo C
Up for bid are these Collets and step collets 11 Pcs Hardinge and other mfgrs.
DESCRIPTION: 10 COLLET HARDINGE 1/4" ROUND FOR AUTOMATICS& SCREW MACHINES USED BUT APPEARS TO BE IN GREAT SHAPE. WE OFFER COMBINED SHIPPING SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. ... moreThe item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo
DESCRIPTION: 10 COLLET HARDINGE 1/8" ROUND FOR AUTOMATICS& SCREW MACHINES USED BUT APPEARS TO BE IN GREAT SHAPE. WE OFFER COMBINED SHIPPING SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. ... moreThe item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo
SquareTrade © AP6.0 USED 59/64 HARDINGE 5C COLLET WITH INTERNAL THREADS PLEASE SEE OUR OTHER LISTING FOR MORE 4C COLLETS. See other items in our e-Bay store. WE SHIP UPS OR USPS FLAT RATE WHEN AVAILABLE. FOR SHIPPING QUOTES CALL TINA@ 727-362-8318. ALL OTHER QUESTIONS CONTACT GERRY VIA EMAIL OR 727-547-0616. BUYER PAYS ACTUAL SHIPPING FROM 33782. LOCAL INSPECTIONS AND PICKUPS WELCOME. I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping. And the item is shipped, YOU. The BUYER. Are now responsible, along with the shipping service provider for the item. G&G ... moreMachinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges. Such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 45 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Bid with confidence! On Apr-26-13 at 21:30:05 PDT. Seller added the following information: