In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
160.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Both 110V and 220V are Available We will send you the right plug! Features: 1. This dust collector is mainly used in industry enviroment. It can collect ... moreall the dusts in the air easily to protect pollution to the air. 2. The dusct collector is located in an rectangular box. Good and simple design. It is easy to maintenance the motor. It can be placed under the dental laboratory bench or other places. So that it will be very convenient to collect the dust. 3. The collector motor comes with strong power. High efficiency, low noise and cost down specifications. 5. SKU: JT-D-26-110 JT-D-26-220. Specifications Voltage: A) 220V/50Hz ± 10% B) 110V/60Hz ± 10% Power: 370W. Maximum pressure: 17kpa. Airflow amount: 70m/h. Maximum vacuum: 9.8kpa. Maximum noise intensity: 60db. Dimensions: 35 x 20 x 35cm. Content: 1X Digital Dust Collector other accessory How to use? 1. Open the box door. Check the filter bag is on correct lacation. 2. Connect the soft plastic tube with wind mouth. 3. Power on. Adjust the frequency to reasonable one to let it work. Notes 1. This product should work with good power supply cable. 2. Pay attention to the power supply cable not to be near sharp items. 3. When you are duty off. Please remember to separate the cable with power supply. 4. Clean the dust-collector bag everyday. 5. Please remember to clean the filter bag every 3-6 months. 6. Change the carbon-brush every 400hours and change the air filter. 7. Before you use the dust collector. Please remember to take off 4 pieces optional multi-direction castor and dust exhaust, these items are inside the front door of dust collector. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation. I will verify your status as an authorized purchaser of this item before shipping of the item. Shipping Payment& Returns Feedback About Us Contact Us We use international Express Shipping Service. Such as DHL, FEDEX, EMS,
$
233.70
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification: ● Power supply voltage: 110V / 60HZ ● Power supply: 800W ● Maximum pressure: 26KPA ● Air flow: 172 m3 / h ● Maximum vacuum: -16Kpa ● Maximum ... morenoise: ≤68dB ● Vacuum tube diameter: 4cm ● Overall size: length 20cm / width 20cm / height 40cm Description: 1. Small size, low noise and high suction power. 2. Dust removal for dental laboratories. 3. Can work continuously for 4 hours. 4. Can be used in conjunction with sandblasting machine, lathe, grinder and workstation. Packing including: 1 * machine 1 * Power cord.
$
135.00
Buy It Now
$25.00 Shipping
Condition: New
Location: United States
Dental Lab Digital Single-row Dust Collector Vacuum Cleaner 370w for Laboratory. Power: 370w. Maximum Vacuum: -9.8kpa. It Can Collect All the Dusts in ... morethe Air Easily to Protect Pollution to the Air. the Dusct Collector Is Located in an Rectangular Box.
$
233.70
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification: ● Power supply voltage: 110V / 60HZ ● Power supply: 800W ● Maximum pressure: 26KPA ● Air flow: 172 m3 / h ● Maximum vacuum: -16Kpa ● Maximum ... morenoise: ≤68dB ● Vacuum tube diameter: 4cm ● Overall size: length 20cm / width 20cm / height 40cm Description: 1. Small size, low noise and high suction power. 2. Dust removal for dental laboratories. 3. Can work continuously for 4 hours. 4. Can be used in conjunction with sandblasting machine, lathe, grinder and workstation. Packing including: 1 * machine 1 * Power cord.
$
244.51
Buy It Now
$85.83 Shipping
Condition: New – Open box
Location: Venice, United States
Machine Type Dust Collector. Dust Collector. Machine Compatibility Woodworker. Horsepower (HP) 1.00.
$
48.38
Buy It Now
Free Shipping
Condition: New
Location: Yakima, United States
Perfect for any clear view dust collection system – allowing you to monitor dust/ debris separation and vapor/ smoke filtration.
$
1895.00
Buy It Now
$100.00 Shipping
Condition: Used
Location: Charlotte, United States
Designed for easy use and long-lasting durability, this dust collector is ideal for a wide range of applications in industrial settings. • Bulk dust separation ... moreand collection. • Refill / Use your own drums.
$
125.00
Buy It Now
$128.05 Shipping
Condition: Used
Location: Miami, United States
Reliant Dust Collector W/ Cage Roller Wheels - Model No. 620. Solid and fully functional Normal light usePlease see picturesThank youGATOP
$
43.16
Buy It Now
Free Shipping
Condition: New
Location: Brentwood, United States
The dust cover has light weight and large capacity, can be worn on the drill bit and not easy to fall down.
$
549.99
Buy It Now
Condition: Used
Location: Millersburg, United States
Model Model 64. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace. Warehouse ... moreStorage Location : NE-05-03. Wired for 230V.
$
1349.99
Buy It Now
Condition: Used
Location: Millersburg, United States
3Hp 3Ph Motor 230/460V Wired for 480V. Model Model 80 CAB. Lift Tables. This is the 84 type dust collector with the bigger motor. Our mission is to empower ... moreindustries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
$
55.30
Buy It Now
Free Shipping
Condition: New
Location: Yakima, United States
Perfect for any clear view dust collection system – allowing you to monitor dust/ debris separation and vapor/ smoke filtration.
$
152.17
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Electric Stand Mixer with 4 Quart Stainless Bowl 7 Speeds Whisk Dough Hook 300 W. Lightweight Power Force Bagged Upright Vacuum Cleaner Carpet Powerful ... moreSuction. Deluxe Nursery Center Playard with Travel Bag Twinkle Twinkle Little Moon White.
$
138.00
Buy It Now
$10.00 Shipping
Condition: New
Location: Chino, United States
1HP Dust Collector, 550 CFM Wheeled Jet Dust Collection, Potable 14.8-Gallon Bag Dust Collector, 30 Micron Bag Filtration Dust Collector, Dust Collector ... moreCentral Machinery System. Great Heat Dissipation: There are multiple heat dissipation holes on the back of the machine to improve the good heat dissipation performance, protecting the motor and extending the service life of the product.
$
233.70
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
(2) Dust Removal for Dental Laboratories. - Maximum Vacuum:-16Kpa. 4) Can Be Used in Conjunction with Sandblasting Machine, Lathe, Grinder and Workstation. ... more1 Machine. Your satis faction is our ultimate goal.
$
148.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
1HP Dust Collector, 550 CFM Wheeled Jet Dust Collection, Potable 14.8-Gallon Bag Dust Collector, 30 Micron Bag Filtration Dust Collector, Dust Collector ... moreCentral Machinery System. 110V 750W 550 CFM 1HP Potable 14.8-Gallon Bag Dust Collector Wall-mounted Design.
$
300.00
Buy It Now
Condition: Used
Location: Coffeyville, United States
PART NO. 97869. CENTRAL MACHINERY. DUST COLLECTOR. OAD: 78" X 33" X 23". WEIGHT: 107 LBS. 70 GALLONS.
$
649.99
Buy It Now
$456.89 Shipping
Condition: Used
Location: Millersburg, United States
2Hp, 3-Phase. 208-220/480V. 3450 RPM. Used, In Working Condition. Tested @ 230V. BARREL NOT INCLUDED . Fits 6" Hose. Our mission is to empower industries ... morewith the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
$
1599.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
JCDC-1.5 115-Volt 1.5-Hp 1PH Cyclone Dust Collector - 717515. Sku 717515. Are you ready to get more from your dust collector?. Heavy debris is pulled ... moredown to collection drum before debris stream reaches the filter, providing constant suction.
$
7750.00
Buy It Now
Condition: Used
Location: Cedarburg, United States
Torit Portable Downflo Dust Collector. SPEC'S SUBJECT TO FINAL INSPECTION.
$
43.16
Buy It Now
Free Shipping
Condition: New
Location: Brentwood, United States
Introducing the 70334 Dust Filter Bag - the perfect solution for all your vacuum and dust collector needs! It's easy to install and remove, making it ... morean effortless addition to your workstation. Part Number: 70334.
$
700.00
Buy It Now
Condition: New
Location: Temecula, United States
New Surplus: Bale Engineered (BE) 2HP Cyclonic Dust Collector with 2 Micron Dust Filtration. This is a high quality, Industrial Dust Collector used for ... moremultiple industrial applications. The Cyclonic action allows you to separate larger debris from dust.
$
600.00
Buy It Now
Condition: Used
Location: Tullahoma, United States
Amano Corp. Dust Collector VF-5N CCR16666N. Electrical Diagram: WYA-403701. Full-Load Current: 2.0A.
$
71.10
Buy It Now
Free Shipping
Condition: New
Location: Lathrop, United States
Perfect for any clear view dust collection system – allowing you to monitor dust/ debris separation and vapor/ smoke filtration. Construction: Heavy Duty ... moreSoft PVC (Polyvinyl Chloride). Made from high quality PVC for durability, strength and easy installation.
$
27.26
Buy It Now
Free Shipping
Condition: New
Location: Brentwood, United States
Introducing the Integrated Blast Gate for Dust Collection by. Premium Quality Build The blast gate is made with industrial strength ABS plastic, which ... moreis well known to most woodworking professionals for it impressive tensile strength, ability to withstand high impact, plus a resistance to heat under heavy usage conditions.
$
151.62
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Keep your work area clean and organized with the WEN 12-Gallon Dust Collector. Features lockable swivel casters, an optional wall mount, a 12-gallon 5-micron ... morezippered collection bag.
$
2990.00
Buy It Now
Condition: Used
Location: Rochester, United States
Make: Donaldson Torit. Electric: 208-230/460V, 60 Hz, 3 Phase. Model: 90-5 CAB. Type: Dust Collector.
$
1450.00
Buy It Now
Condition: Used
Location: Brookpark, United States
Very nice Empire DCM-80a blast cabinet for sale. Works very good! Motor is strong and blows hard. Any questions feel free to ask. As always. Pics show ... morecondition and buying as is. No returns. Thanks for looking and buying! I bought out a machine shop and this cabinet was in there. I also have other great items for sale also! Check out my auctions. Buyer must pick up or is Fully reliable for arranging shipping! MSRP over $3000 seen below! We will take Best offer! blastingsupplies.com:458/productdetails/Blast-Cabinets/EMPIRE/DUST-COLLECTOR/dust-collector-dcm-80a_46092
$
148.00
Buy It Now
Free Shipping
Condition: New
Location: United States
Welcome to our store, we have high-quality pre-sales and after-sales service. Before you buy this Item, you can contact us if you have any questions, ... moreand we will answer you in time. I wish you all the best.
$
233.71
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Dental Lab Dust Collector Portable Vacuum Cleaner Extractor Dust Removal Machine. Dust Removal for Dental Laboratories. ● Maximum Vacuum: -16kpa. Can ... moreBe Used in Conjunction with Sandblasting Machine, Lathe, Grinder and Workstation.
$
160.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Both 110V and 220V are Available We will send you the right plug! Features: 1. This dust collector is mainly used in industry enviroment. It can collect ... moreall the dusts in the air easily to protect pollution to the air. 2. The dusct collector is located in an rectangular box. Good and simple design. It is easy to maintenance the motor. It can be placed under the dental laboratory bench or other places. So that it will be very convenient to collect the dust. 3. The collector motor comes with strong power. High efficiency, low noise and cost down specifications. 5. SKU: JT-D-26-110 JT-D-26-220. Specifications Voltage: A) 220V/50Hz ± 10% B) 110V/60Hz ± 10% Power: 370W. Maximum pressure: 17kpa. Airflow amount: 70m/h. Maximum vacuum: 9.8kpa. Maximum noise intensity: 60db. Dimensions: 35 x 20 x 35cm. Content: 1X Digital Dust Collector other accessory How to use? 1. Open the box door. Check the filter bag is on correct lacation. 2. Connect the soft plastic tube with wind mouth. 3. Power on. Adjust the frequency to reasonable one to let it work. Notes 1. This product should work with good power supply cable. 2. Pay attention to the power supply cable not to be near sharp items. 3. When you are duty off. Please remember to separate the cable with power supply. 4. Clean the dust-collector bag everyday. 5. Please remember to clean the filter bag every 3-6 months. 6. Change the carbon-brush every 400hours and change the air filter. 7. Before you use the dust collector. Please remember to take off 4 pieces optional multi-direction castor and dust exhaust, these items are inside the front door of dust collector. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation. I will verify your status as an authorized purchaser of this item before shipping of the item. Shipping Payment& Returns Feedback About Us Contact Us We use international Express Shipping Service. Such as DHL, FEDEX, EMS,
$
160.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Dental Lab Digital Single-Row Dust Collector Vacuum Cleaner 370W for Laboratory. cushions for making the suction inlet near. The suction hose is. This ... morecompact desk-top portable suction base brings a substantive.
$
249.99
Buy It Now
Condition: Used
Location: Watertown, United States
$
539.00
Buy It Now
$354.77 Shipping
Condition: For parts or not working
Location: Venice, United States
Item is incomplete as it doesn't have the fan shroud and possibly other components. SEE PHOTOS! Item was tested and works as it should yet is slightly ... morebent. 155 Center Ct, Venice, FL 34285. Industry Recycles.
$
20.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Stanberry, United States
Replacement filter bags only
$
80.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Kailua Kona, United States
Milwaukee 2306-22 12V Cordless HammerVac Universal Dust Extractor Tool Only. No International Shipping, United States Only
$
299.99
Buy It Now
Condition: Used
Location: Clare, United States
Dust collector for surface grinder. Specifications: Model: Unknown Phase: 3 Voltage: 230v Condition: Good working SHIPPING OPTIONS: Standard Truck Freight ... more(4 to 8 Days delivery time): Contact for Quote Local Pickup: FREE International Shipping: Please contact for Quote M.I.S. Industrial contact info: ​info (at) misindustrial.com ​Office: [phone removed by eBay] ​Also please check out our website!.
$
55.74
Buy It Now
Free Shipping
Condition: New
Location: Yakima, United States
Perfect for any clear view dust collection system – allowing you to monitor dust/ debris separation and vapor/ smoke filtration. Construction: Heavy Duty ... moreSoft PVC (Polyvinyl Chloride). Made from high quality PVC for durability, strength and easy installation.
$
233.70
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification: ● Power supply voltage: 110V / 60HZ ● Power supply: 800W ● Maximum pressure: 26KPA ● Air flow: 172 m3 / h ● Maximum vacuum: -16Kpa ● Maximum ... morenoise: ≤68dB ● Vacuum tube diameter: 4cm ● Overall size: length 20cm / width 20cm / height 40cm Description: 1. Small size, low noise and high suction power. 2. Dust removal for dental laboratories. 3. Can work continuously for 4 hours. 4. Can be used in conjunction with sandblasting machine, lathe, grinder and workstation. Packing including: 1 * machine 1 * Power cord.
$
148.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specifications Material: Iron Surface Treatment: Spray Painting Color: Blue, Black, White Voltage: 110V Plug: US Standard Motor Power: 750W, 1HP Suction ... moreCapacity: 550CFM Standard Bag Filtration: 30Micron Base Size: 38*42cm/ 14.96*16.5inch Turbo Size: 23cm/9.06inch Dust Outlet Size:10cm/4inch Bag Capacity: 56L/14.8gal Net Weight: 19kg/42lbs Gross Weight: 20kg/44.1lbs Product Size: 100*38*46cm/39*15*18inch Package Size: 42*35*32cm/16.5*13.78*12.6inch Package Included 1* Dust Collector with Wire 1* White Bag 4* Casters 1* English Manual All Accessories for Assembly.
$
795.00
Buy It Now
Condition: Used
Location: Brookpark, United States
15 DUST BAGS (80 SQ.FT.). -- WGT: 570LBS. EQUIPPED WITH.
$
49.99
Buy It Now
$26.31 Shipping
Condition: Used
Location: Millersburg, United States
Galvanized steel clamp type duct fitting. x Width 12 in. x Height 12 in. Our mission is to empower industries with the tools and solutions they need to ... morethrive in a dynamic and ever-evolving marketplace.
$
262.74
Buy It Now
Condition: Used
Location: Middlebury, United States
Prefer to pick it up yourself?. MPN: Model 66. To get a freight quote we will need to know the following Weight (lbs, oz): 291. Size: Length: 37 in. Width: ... more32 in. Height: 42 in. LOCAL PICK-UP.
$
975.00
Buy It Now
Condition: Used
Location: Brookpark, United States
SquareTrade © AP6.0 | DCE Unimaster UMA73G1AD Vacuum Dust Collector w/Shaker 120V 1-Phase 1HP, Click to View Image Album Click to View Image Album ... moreClick to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album You are bidding on a DCE Unimaster UMA73G1AD Vacuum Dust Collector w/Shaker. 120V; 1-Phase; 60Hz; 1HP. This dust collector is in good working condition and was removed from a working environment. There are some scratches and sticker resiude on the exterior casing from normal use but overall is in good shape cosmetically. The inside of the cabinet has some white dust residue on the walls and on the filters from use. Overall Dimensions: 87.5"h x 23"d x 22.5"w(33" including shaker motor box that extends from right side of he cabinet) SHIPPING: Buyer pays for freight shipping of this item. Buyer must arrange their own freight shipment. This item will be shipped from JM& Associates. 86 Benson Rd, Middlebury CT 06762, business with a dock. This will be shipped on a pallet 48 x 40 x 92" high. It Weighs 640 lbs on pallet. You can use the freight carrier of your choosing or we recommend these carriers for a quote: Freight Quote: Dave, Phone 800-323-5441 ext.1571, or Carolina, phone 800-323-5441 ext. 1886. They can give you a quote over the phone. Or you can call Everton at Casestack.com 818-518-2300 Ext. 2315. This item can also be picked up locally at our warehouse if you live near Connecticut. Any item being sent freight at a value over $2000 must be fully insured by the customer with their freight shipper. Any shipping damage that occurs to an uninsured freight item is not our responsibility. If you are arranging shipment for this item, please get the optional freight insurance if you
$
49.99
Buy It Now
$27.79 Shipping
Condition: Used
Location: Millersburg, United States
Galvanized steel clamp type duct fitting. 17" overall length. Our mission is to empower industries with the tools and solutions they need to thrive in ... morea dynamic and ever-evolving marketplace. x Width 14 in.
$
405.00
Buy It Now
Free Shipping
Condition: Used
Location: Burley, United States
Spring/Summer Sale! Regular Price: $195.00 Sale Price: $169.95 This item is brand new and comes in a box with a 1 year warranty. G1163 1 HP Light Duty ... moreDust Collector Effective dust collection not only keeps your shop cleaner and more pleasant to work in. But it can also protect your health by reducing your overall exposure to dust. The small size and low profile make this a perfect point-of-use, dedicated dust collector. When it's not possible to plumb your shop with a full dust collection system, put one of these next to every machine instead! Motor size: 1 HP. 120V/240V, Single-Phase, prewired 120V Motor Amp Draw: 7A at 120V. 3.5A at 240V Intake hole size: 4" Portable Base Size: 14" x 14" Height(with bags inflated) 19-1/2" Bag Size(diameter x depth) 13-1/2" x 24" Powder coated paint Impeller: 10" Balanced Cast Aluminum, Radial Fin Air Suction Capacity: 537 CFM Static Pressure: 7.2" Bag capacity: 2 cubic feet Bag Filtration: 30 Micron Made in an ISO 9001 factory Approx. Shipping Weight: 51 lbs Optional Bag Upgrade to 3-Micron Filtration: H4340 Ship anywhere within the lower 48 states for $16.95! Please send us a message through eBay if you are shipping to Alaska. Hawaii or Puerto Rico. Please provide city, state and zip code. Thank you. Item location: Bellingham. WA/ Springfield, MO/ Muncy, PA. We are one of the largest machinery companies in the USA and absolutely have the largest selection of machinery under one brand- GRIZZLY. Sales tax will be charged to all sales within PA. MO and WA. You are welcome to pick up your purchase at our locations. You will have to pay sales tax if you pick it up at our location regardless of where you are from. GRIZAUCTIONS is the only official Grizzly Industrial seller on eBay. We ARE Grizzly Industrial. Inc and any other seller representing themselves as Grizzly on eBay is fraudulent and must be reported to eBay and to us for legal action. Thank you for your interest. Powered by The free listing tool. List your items fast and easy an
$
1275.00
Buy It Now
$85.00 Shipping
Condition: Seller refurbished
Location: Pawtucket, United States
Refurbished MistBuster 500 oil mist collector for CNC machining operations. This unit is crafted by Air Quality Engineering in the United States and has ... morea variable speed dial. This air cleaner is ideal for eliminating smoke and oil mist produced during CNC machining.
$
300.00
Buy It Now
Condition: Used
Location: New Baltimore, United States
1HP, SINGLE PHASE. MODEL 50-720.
$
224.95
Buy It Now
$156.85 Shipping
Condition: Used
Location: Fruita, United States
Shows signs of use with lite scuffs and scratches. DOES NOT have a hose. Works as it should. CJS214 3041 091323.
$
1390.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
Main Inlet Size 1 Split Inlet Adapter (Included) Single Phase. From 6" Split To (2) 4" Inlet. 1.5 HP (1.1 kW). Not For Wood Dust Collection . Unit Weight.
$
17.00
Buy It Now
Free Shipping
Condition: Used
Location: Merrimack, United States
Dust collector strap, fits approx 18.5" to 19.25", see photos
$
299.95
Buy It Now
$90.35 Shipping
Condition: Used
Location: Nappanee, United States
For sale is a good used condition CINCINNATI FAN 100ST3 PORTABLE BARREL TOP DUST COLLECTOR 1HP 208-230/460V 3PH . This motor is 3 phase so make sure ... moreyou are set up for that. This dust collector is made to fit on top of a 50 gallon drum barrel.
$
132.67
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Keep your work area clean and organized with the WEN 12-Gallon Dust Collector. Features lockable swivel casters, an optional wall mount, a 12-gallon 5-micron ... morezippered collection bag.
$
750.00
Buy It Now
Condition: Used
Location: Oxford, United States
$
39.99
Buy It Now
$12.00 Shipping
Condition: New
Location: Farmington, United States
Filter (dust Collector)Bags New No Name Brand 9.25" X 58". Condition is New. Shipped with USPS Ground Advantage.
$
499.99
Buy It Now
Condition: Used
Location: Millersburg, United States
Part Number 1151. Model 1151. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace. ... moreLocal Pickup. Warehouse Storage Location : NE-04-02.
$
20.15
Buy It Now
Free Shipping
Condition: New
Location: Vista, United States
Model: OB102. Oasis Machinery OB102 20" Dia 30 Micron Dust Filter Bag (11766) 20" x 32" Long. Micron: 30. CO2 CYLINDER & REGULATOR KITS. This high quality ... moreDust Collector Bag replaces Delta A04526 / A04496 & Jet 708698, 708639RC dust bags.
$
495.00
Buy It Now
Condition: Used
Location: Brookpark, United States
We have a loading dock and fork lifts with the ability to load any type of truck. we can either use your account number or provide a rate quote.
$
233.70
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Dental Lab Dust Collector Extractor Portable Vacuum Cleaner Dust Removal Machine Lab Equipment 110V 800W Specification: - Power Supply Voltage: 110V / ... more60Hz - Power Supply: 800W - Maximum Pressure: 26Kpa - Air Flow: 172 m3/h - Maximum Vacuum: -16Kpa - Maximum Noise: ≤68dB - Vacuum Tube Diameter: 4cm - Overall Size: Length 20cm / Width 20cm / Height 40cm Description: 1) Small Size, Low Noise and High Suction Power. 2) Dust Removal for Dental Laboratories. 3) Can Work Continuously for 4 Hours. 4) Can Be Used in Conjunction with Sandblasting Machine, Lathe, Grinder and Workstation. Packing Including: 1 * Machine 1 * Power Cord.
$
148.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
1HP Dust Collector, 550 CFM Wheeled Jet Dust Collection, Potable 14.8-Gallon Bag Dust Collector, 30 Micron Bag Filtration Dust Collector, Dust Collector ... moreCentral Machinery System. High Absorption: The dust collector adopts 1HP strong copper, which supports continuous work.
1 2 3 4 5 6 7 8 9 10 11 12 13
 In 

Former Listings  
 
#VS 1200 TORIT "Vibra Shake" Dry Cartridge Dust Collector (New 1987)
This is a self-cleaning dust collector. I used it for stone sculpture. And when the power to the unit was turned off, a small motor shook the round filter for 30 seconds. This kept the filter clean, especially when using it to filter very fine particles. Dimensions: 24 3/4 x 30 3/4 x93 inlet size 6" Sound level 510 dB(A) Horsepower 3 Air flow 1200 CFM Power 208/220 3 phase 60 cycle LOCATED IN SOMERVILLE. MA
NorthTech SDC-4043 Dust Collector
Machinery Company. Inc. Quality New and Used Woodworking Equipment Sale-Service-Delivery-Leasing-Parts 1-used NORTHTECH model SDC-4043 portable dust collector. With 3 hp fan motor. With two(2) upper filter bags. With two(2) lower filter bags. For operation on 230/60/3. mounted on casters. Machine serial number 1149226. Shipping Shipping will be provided at the cost of the buyer. Please contact(502) 648-2991 before purchasing the product. We will provide a shipping price to your location. The item ships directly from our warehouse.
10 HP Cyclone Dust Collector to Barrel Discharge, 4 Bag Plenum, 240V, 3Ph
Buyer to remove and load This unit was purchased used with no model. Or tagging. It was replaced by a larger system when the seller moved into a new building. No manufacturer information is available. We have listed all available information we have for the collector. It is for sale"as is, where is" and is priced accordingly. Cyclone collector with barrel discharge. 4 bag plenum 10HP, Approx. height 12' Footprint approx. 4' x 8' 240V, 3Ph, As is. As Taken From Service Stock Number: V-1-195 Framing or crating will incur additional charges. If needed. Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to ... moreyour location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee, if required. Used equipment is sold as is, where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight, rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additiona
45028002 Used- Quatro Air Technologies Dust Collector, Model DC2001-2, Carbon St
Used- Quatro Air Technologies Dust Collector. Model DC2001-2, Carbon Steel. Airflow 360 cfm, dual station. Includes a 1/3 hp, 1/115/230 volt, 3450 rpm motor. Requires a filter. Mounted on casters. ref# 45028002 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
AGET Model DB-1-SP DustKop Dust Collector
Aget DustKop Dust Collector Description: We are pleased to offer this nice Aget DustKop Dust Collector Model DB-1-SP is a small dust collector developed for small individual dust sources. Particularly woodworking machines. It uses a 1/3 HP continuous-duty motor and a self-cleaning, paddle wheel fan. The vacuum hose(NOT INCLUDED) attaches to the 5" diameter vacuum inlet on the blower housing. The dust disposal drum is mounted on casters and enclosed in the housing that supports the blower. The discharge from the blower, induces a centrifugal action. This action drops the heavier particles into the dust drum and only the fine dust goes into the filter bag for filtration. The fabric filter bag is specially woven for dust collecting uses. A hand shaker permits periodic shaking of the filter. As required. The bag on this machine was bought ... morein 2005. Has been used only to test the machine. The bag cost $56.oo. Included, you will also get a copy of a Maintenance Instruction booklet with a parts list. This item will be wrapped. Banded and shipped via Freight Truck. Crating is available(trucking companies may require that your item be crated) The cost of crating this machine is: $75.00. Specifications: AC General Electric Motor: Mod: 5K33FN30 HP: 1/3 V: 230/460 Hz: 60 PH: 3 RPM: 3450 Cont. Forward Shipping: This item will be wrapped. Banded and shipped via Freight Truck. Crating is available(trucking companies may require that your item be crated) See item description for exact crating charge for this item. We will load on truck for no additional charge. All sales are made f.o.b. our plant. Maple Hill, KS. Title to the goods. Unless otherwise provided, passes to purchaser upon delivery of the merchandise to the carrier. Print& Finishing Equipment’s(PFE) responsibility ceases upon issuance of a bill of lading or delivery to carrier. PFE has no responsibility for goods in transit. Unless otherwise agreed in writing by PFE. All freight charges, insurance and handling charges from PFE’s plant, Maple Hill, KS will be o
4205A Hoffman 60HP 230/460V 3Ph Centrifugal Exhauster Blower Dust Collector
In Great Condition! Super Clean& Fully Functional! 4205A Hoffman 60HP 230/460V 3Ph Centrifugal Exhauster Blower Dust Collector. Shipping: Buyer is responsible for shipping costs and due to the nature of this item. It will need to be shipped via common carrier. Please contact us with your zip code and whether it would be going to a commercial address with a dock or outdoor forklift(either yours, one you are employed at, or a friend or relative's) one without, or residence for an accurate shipping quote. It is imperative that you provide both pieces of information! Please note residential delivery is typically higher. So it is better to have it delivered to a commercial address or to one of our carrier's terminals in your area for pickup at the terminal. Also, we are able to ship using your carrier if preferred, and we will provide ... morethe necessary contact information to forward a bill of lading, pickup address, etc. Local pickup is available as well. Can you believe our price? Packoderm Industrial- Eliminating pack rats one sell at a time!
Handler 76D-0 Dental Lab Benchtop Bench Top Dust Collector w/ Red Wing 26 Lathe
Handler 76D-0 Dental Lab Benchtop Bench Top Dust Collector w/ Red Wing 26 Lathe Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
AIRFLOW 5 HP F240 DUST COLLECTOR / BAG HOUSE
AIRFLOW DUST COLLECTOR/ BAG HOUSE MODEL F240-CV-PG7-VT-F STAND-DR LOOP S/N 24044 THIS IS A 5 HP 460V 3 PHASE UNIT CLOTH BAGS 20-24X24 BAGS 22X20" SQUIREL CAGE FAN W/5HP MOTOR 4-6" VENTS ON THE BOTTOM BOTH SIDES LISTING READS UP TO 6000 CFM LOW NOISE UNIT SOME SCRATCHES AND BENT SHEET METAL ON ONE SIDE THIS SHOULDN'T AFFECT PERFORMANCE THIS UNIT MEASURES ABOUT 52X41X96" TALL WEIGHT APP 1100# SOLD AS IS PLEASE NOTE: CONDITIONS OF SALE All items are"sold as is where is" without warranty or guarantee as to suitability for purpose or condition unless noted in the add. Items are generally purchased through a number of sources or third parties and prior use or function cannot be vouched for. We generally do not have expertise in a lot of the items we sell and it is strongly recommended that when in doubt an expert in ... morethe field be consulted. The items for sale might be new or used but should be considered used. By bidding on this item the purchaser acknowledges there may be an inherent danger in its use. Either physical or environmental and that it is the purchasers sole responsibility for the handling, use, disposal and appropriateness of use of a particular item, and will hold the seller harmless from any and all liability that might arise from their purchase or use of the item. Shipping is the responsibility of the purchaser. We will. As a courtesy help make arrangements for the loading and shipping of a given item but the title is the customers as soon as it is paid for and loaded. We are not responsible for any damage done to an item while in transit. e is available at an additional expense from most carriers and it is the purchasers responsibility to request additional coverage if desired. Packaging for shipment is done at an additional cost to the purchase price. And will vary according to the complexity, size and difficulty of making it secure for shipment. Please ask what this will be for a given item. There are no markups on freight costs. Only actual freight charges are asked for.
No. 90 Torit Dust Collector, 1425 CFM (21434)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Model 90.TORIT,1425 CFM,Shaker Handle,Dust Drawer,5 Hp. 60/3 Our stock number: 21434. MODEL NUMBER: 90 SERIAL NUMBER: Unknown GENERAL SPECIFICATIONS Cabinet Type(1) 6" Inlets CFM: 1425 Exhaust Outlet: 8" x 5" Dust Storage Area: 5.5 Cubic Feet Fabric Filter Area: 250 Square Feet Filters: 25) 24" x 30" EQUIPPED WITH 5 HP Motor. 3450 RPm 230/460/60/3 Shaker Handle Exhaust Silencer Dust Drawer Floor Space: 42" x 38" x 105" Tall W/18" Spacer on Bottom Approximate Weight: 650 Lbs. F.O.B. Cincinnati. Ohio 45223. PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold ... moreprevious to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 800-745-6008 Michelle Wood email: michellew@cwwood.com Norman Wood email: normw@cwwood.com Payment Information We accept Visa. Master Card, Discover, American Express, Paypal, Bank Wire Transfers and Checks. Although we do accept Paypal. We prefer other forms of payment. Shipping Information Domestic: We ship freight collect with Dayton Freight. Matson America, or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Dayton Freight: 800-860-3210 Matson America: 850-562-8592 International: All international shipping is to be set up by the buyer. Recommended Custom Built Crates: 513-248-4422 Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00 +. skids shown in pictures are not included with the item Any item purchased with a pick up or delivery date more than 10 days from date of sale may be subject to a storage fee. please discuss with seller before purchase Return Policy We accept returns within
Grizzly Industrial 3 HP Dust Collector Dual Twin Double Bag
For sale is a used Grizzly Industrial Double Bag Dust Collector s/n 8840718 We could not find a model# on it. It is 3 Hp. 220 volt 1 phase 60 Hz. It was mfg. new in 2002. That's all we know. Purchased from a surplus equipment auction. Sold to us in good working order. You get what you see in the photos. Nothing else included. It is on a stand with wheels. Buyer pays for shipping. We will wrap and secure to a pallet. Thank you for looking?265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13f040122f3-0xff-
ROTO-CLONE-VACUUM-Exhauster Dust Collector Rotoclone-D-
NO RESERVE! AAF American Air Filter- Dynamic Precipitator- ROTO-CLONE-VACUUM- Dual Function Exhauster& Dust Collector in a Single Unit Rotoclone- Type D- uses a turbine-like Impeller to obtain High Collection Efficiency. Pulled From Working Service! Sold As Is! Need More Info? email me ross1@charter.net- Located in Los Angeles Calif 91303
APEX DUST COLLECTOR
APEX DUST COLLECTOR#50796 Normal 0 false false false EN-US X-NONE X-NONE Payment All payments must be received by Industrial Asset Recycling within 7 days. Shipping Buyer responsible for shipping. And costs related to shipping. FOR AN EXTRA FEE- PALLETIZE AND SHRINK WRAPPING CAN BE ADDED* About Us At Industrial Asset Recycling LLC we still believe in a personal relationship with our clients and attuning all our resources to their best advantage and needs. Regardless of your business we have an expert to fit your specialized need. Collectively. We have experience in all business areas of Asset Management, Recycling and Environmental Remediation to service your ever changing business needs. SEE OUR STORE FOR MORE GREAT DEALS Item sold"As Is"
DUST COLLECTOR,FOR SANDER,GRINDER,SAW,METALWORK
SquareTrade © AP6.0 We believe(tag is missing) this is a LINCOLN Dust Collector. This was told to us by another Ebay member. This unit was removed from a Engelberg Belt Sander. It is in very good physical and operating condition. Dust Collector 2 Horsepower/ 230/460 Volt/ 3 Phase(currently wired 460V) 3450 RPM Uses Filtered Collection Box and(2) 24" X 24" X 2" Replaceable Filters 5" Exhaust Vent Shipping Weight 300 Pounds See Photos Any questions e-mail or call Gerry@ 727-547-0616. Please include item number in all correspondence. No charge for packing. Skidding or loading. Buy Here Save Here. Local Pickup Welcomed and Encouraged at NO Extra Charge. Buyer Pays Shipping. We combine multiple items for shipping when possible. Indicate if delivery is to a business or a residence. Buyers PLEASE include phone number in ... morecase we have a question. See other items in our e-Bay store. Be sure to add me to your favorites list! On Feb-18-09 at 02:02:02 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Grobet USA Dust Collector with Baldor 1/4 HP
Grobet USA Dust Collector with Baldor 1/4 HP motor. In great condition see pictures.
Vigor Dental Polishing Dust Collector Vacuum DC-2000 Made in USA 3400 RPM
WORLD DENTAL INC. 716-957-3129"QUALITY NEW&USED DENTAL EQUIPMENT AND SUPPLIES BELOW WHOLESALE PRICES" Vigor Polishing Dust Collector Vacuum DC-2000 Tested and works properly. Good functional condition. This machine is a horse! NO RESERVE! ShipSaver.
Nice Handler 76e polisher fan dust collector dental jewelry A O Smith 3450 RPM
the guard is cracked but on the end that doesn't matter. this is a fine running machine. Wyatt Earp not included. this machine has a lot of life left in it it's smooth and quiet
HTC 24C HTC 26D Portable heavy Duty vac Dust Collector 4 Concrete Grinder NoDust
I'm selling both of these HTC 26D and HTC 24 c HTC® 26 D HTC 26 D is the natural choice for our smaller grinding machines• The filter system can be fitted for wood dust• The cyclone can be raised and lowered. Simplifying bag handling. Air-pulse filter cleaning• Easy to transport• H13 filter(HEPA) Art. Number Ampere A Frequency Hz Max. Airflow m3/h Recommended grinder 10712 10 50 320 HTC 400. 420 10751 23 60 320 HTC 400. 420 HTC 26 D HTC 26 D Motor kW 2 x 1.3 2 x 1.3 Voltage V 1 x 230 1 x 115 Weight kg 49 49 Dimensions LxWxH mm 910x600x1300- 1610 910x600x1300- 1610 HTC® 24 C Why use a pre-separator? A pre-separator preserves the even capacity of the separator and saves filter stockings in the machines. This is why we recommend a pre-separator for improved performance and optimal grinding* Does not apply to the iAD range Art. ... moreNumber Dimensions LxWxH 10721 mm 600 x 500 x 1460 HTC 24 C Recommended sepa- rator HTC 26 D Weight kg 22 No Hoses! No Hoses! Same size as shop vac Hoses(These are used and sold as! Only used on to big jobs they have been just sitting around need to go Sold As is) Will ship if you pay shipping! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f0c30d9e7-0xfd-
Dewalt DW621 Plunge Router, Soft Start Variable Speed 2 HP Motor, Dust Collector
Description Dewalt Router Dewalt DW621 mid size professional plunge router. This has a 2 HP motor and is big enough to handle most workshop projects whether table mounted or hand held. Dewalt's website gives the following description: Full wave electronic variable speed motor with soft start runs at 8.000-24,000 rpm with constant speed under load to ensure a quality finish in all materials Rack and pinion depth adjuster. With micro-fine adjusting allows quick, accurate set-up Integral dust collection system efficiently removes chips and provides superior bit visibility Spindle lock button allows for single-wrench bit changes Innovative rubber-coated knobs have plunge-lock and on/off built-in for maximum user control 1/4" 1/2" collet capacity for greater versatility 10 Amp motor uses state of the art circuitry for soft starts ... moreand smooth operation One-piece motor shaft and spindle ensures perpendicularity and accuracy Guide Bushing adapter plate accepts standard guide bushings for template work Phosphorous bronze bushings provide a smooth and accurate plunge Micro-fine depth adjusts in increments of 1/256" for extreme accuracy This particular router is in excellent used condition. It runs smoothly and quietly and there appear to be no issues. It is from the estate of a Missouri woodworker/artist and has been well cared for. Check the pictures and feel free to ask any questions. There are more woodworking and metal working tools in my other auctions and I will be happy to combine shipping to save costs. Payment and Shipping We gladly accept PayPal. You can expect an e-mail from us within 24 hours of auction end giving total cost and payment options. Shipping costs are included in most auction listings. If you want to use PayPal you can at any time after the auction ends. We expect payment to us within 3 days of auction end. Shipping costs shown with eBay's estimator are approximate USPS costs. I use FedEx Ground for most shipments over 3 pounds and the estimator does not support FedEx. Often t
TRINCO DRY BLAST 800PT BLAST CABINET DUST COLLECTOR
BARELY USED.LOOKS AND WORKS AS NEW THIS IS 230 VOLTS. MODEL 800-PT. DUST COLLECTOR WILL NOT SHIP LOCAL PICK UP ONLY.
VANIMAN VANGARD PLATIMUN 2X DUST COLLECTOR
HELLO, HERE IS OFFERED A VANIMAN VANGARD PLATINUM 2X DUST COLLECTOR FOR SALE! IT WAS SET UP ON A STATION WHAT WAS USED FOR QUALITY CHECK ONLY.SO THIS DUST COLLECTOR WAS NOT MUCH IN USE! PLEASE. MAKE AN OFFER.OUR LOSS COULD BE YOUR GAIN! C0MES WITH HOSE AND POWER CORD) THANK YOU!
INTEGRAL SYSTEMS ABRASIVE DUST COLLECTOR DENTAL
INTEGRAL SYSTEMS ABRASIVE DUST COLLECTOR DENTAL. This is a nice. Powerful system designed for multiple stations. Model V86DSB— dual high power(1.25 hp) motors(dual speed. 1 six foot hose, 2 remote on/off switches, 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f0f4f5d3d-0x105-
Aget Mistkop Mist Dust Oil Collector 1/3 HP 6XJ12 Used No Reserve
You are bidding on a used Aget Mistkop 1/3 HP mist collector. I won this item at an auction in a lot and have no use for it. I have plugged in the unit to verify that it works. I was surprised at how quiet the system was given it's suction abilities. But what is quiet to me may not be considered quiet to you. This unit is very clean compared to some of the others out there. Because of the unique size of this item, local pickup only. This unit is sitting on a loading dock waiting to be put on a truck. I have no problem doing that for you if you'd like to arrange for someone to pick it up. If you have any additional questions. Feel free to contact me. No returns or refunds, all sales final. No international shipping. Email me before bidding if you have zero feedback. Please see my other auctions for additional gages, micrometers, and ... moreother tool making items. Good luck and happy bidding.
Aercology Dust Collector Model DM1500, Inv 8060
Aercology Dust Collector Model DM1500: Serial number 37341 This is a 3 HP 230 Volt. 3 phase, 60 hz machine. 7/4 amp draw. This collector has three gated 4 inch inlets on 3 different sides. Allen Bradley electrics, and manual shaker with removable cleaning tray. Inv.8060) General Catalogue Specifications.Airflow1500 CFM,Static pressure 3.0" W.G.Construction 14/16 ga. Standard media Flame retardant cotton sateen bags.Filter area 180 sq. ft.Standard inlet diameter 8" Sound level 66 dba. Dust capacity 2.0 sq. ft. NOTE: Replacement cost is $3.489.00,Motor Specifications 3 HP A/C Blower motor Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added ... moreto the amount you bid: a handling/loading charge of $75; and the actual shipping cost(to be determined based on your location) Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Questions? For more information read our page. Terms All sales are fin
520 AGET "DUSTKOP" FILTER TYPE DUST COLLECTOR - #26304
Quote#26304#520 AGET DUSTKOP FILTER TYPE DUST COLLECTOR Serial No 7293. Model 520, EQUIPPED WITH: Crank Handle Filter Shaker Fiberglass Filter CATALOGUE SPECIFICATIONS: CFM Capacity. 400 CFM Bin Capacity. 1 CU FT Inlet Diameter. 3" Filter Size. L x W. 18" x 24" Main Motor. Horsepower/RPM. 0.33 HP/3600 RPM Electrical System. 110/1 Weight. Approximately. 120 LBS NOTE: As Taken From Service. PRICE: F.O.B. OUR WAREHOUSE. $250.00 Machine/Equipment Subject to Prior Sale.
Dust Collector , 3 Hp. 230 Volt Single Phase Works Perfectly. No Issues
Nice two bag dust collector. Works great. Single phase. Will ship free Posted with
TRINCO DRY BLAST DUST COLLECTOR MODEL DEDC
TRINCO DRY BLAST DUST COLLECTOR MODEL DEDC GUARANTEED WORKING OR YOUR MONEY BACK! You can see the manufacturer's information on this item online at: http:www.trinco.com/leftframe1.htm You can also watch a video of a similar one on Youtube. Please note that this video shows a complete system, the one we have listed here is only the DUST COLLECTOR MODEL DEDC SIMPLY ANOTHER ITEM BY You are bidding on a TRINCO DRY BLAST DUST COLLECTOR MODEL DEDC as can be seen in the pictures! TRINCO MODEL DEDC PULL-THROUGH DUST COLLECTOR Model DEDC is ideal for applications requiring a highly efficient dust collector. Features include superior dust filtration. Drawer for convenient dust disposal and a shaker mechanism for efficient filter bag cleaning. Can be added to cabinets already in use! Is suited for medium to heavy amounts of blasting. Is recommended ... morefor use with dusty media or multiple guns. Is recommended for use with very fine media. This unit is in VERY GOOD physical condition. IT LOOKS GREAT. It is in PERFECT working order. We will provide a 3 day return and money back guarantee! Please let us know if you have any questions. Please see the photos for more detail. Guaranteed not DOA. Plea se feel free to ask any questions you may have. EXPECT A PROMPT REPLY! ~ SE HABLA ESPAÑOL ~ ~ FALAMOS PORTUGUÊS ~ ~ NOUS PARLONS FRANÇAIS~ BE SURE TO CHECK OUR EBAY STORE FOR OTHER GREAT DEALS This product can be previewed at our facility in ANN ARBOR- MI. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please ask questions before you bid. Please don’t wait until you have won the auction to begin asking specific questions regarding the item listed. We value our feedback and hope you will do the same. Please do not bid if you aren't going to buy. We will work with anyone on any problems should they arise. They rarely do since we make sure to list as completely as possible. If shipping problems arise we will be ther
Donaldson Torit Dust Collector Cyclone
This is a Donaldson Torit cyclone dust collector with a seven horse motor and four new bags. Comes with two extra new bags and dust collection roll out cabinet and a 12 in duct work with t. Posted with eBay Mobile
Porter-Cable PC400AP 1 HP Motor 650 CFM Single-Stage Dust Collector
This 1hp 650 CFM Porter Cable dust collector that is practically new. It is used but very little. It has never been hooked up to capture woodchips or actually hooked up for what it was intended for. Was going to set up but never got around to it. Only use was the assembly. And dust pickup in my garage, basically what's in the bag and theirs not much is all that's been run through it. Original collection bag still attached. One of the bands for the lower bag went missing so I used 2 large hose clamps to attach and hold the bag. Works just as good and you can't tell. Will send pic if you want. Has a 5 or 10 micron bag that came with it but it wasn't fine enough at the time so I bought a 1 micron bag(pictured)which filters out the fine dust particles fairly well. My loss is your gain. I have a total of about 325.00 total invested. ... moreIf you'd like to come look at it before you bid contact me.
Camfil Farr GSMINI Gold Series Dust and Fume collector in MINT condition
Just removed from solar boiler manfacturing facility. I do not know much about about them. And the price I am listing at is a shot in the dark. I really have no clue. Please call the manufacture for specs on this unit. Model# GSMINI Part Number 215607001 Serial number 818463 I can remove the main unit from it's stand. Steel strap and shrink wrap, both pieces on 2 pallets to ship. I will do this for free. You send your carrier to pick up. 55 gallon discharge system. You get all that you see with the unit. Including the electrical connections that was professtionally removed and taped to the unit. Here is some spec from the internet. The new Farr Gold Series GS-Mini is a single-cartridge dust collector for sub 500 cfm applications where you want a dedicated dust collector for one process machine or as a bin vent on a silo. The GS-Mini incorporates ... morethe same cam-lock features and structural strength of the standard Farr Gold Series. A Gold Cone filter cartridge. Fan and manual pulse system are included. Sanding/grinding dust, Food additive/spices, Talc. Cornstarch dust, Abrasive blasting, Carbon black/toner dust, Ambient filtration, Welding fumes, Mixing and blending dust, Mineral. Silica dust, Plastic and composite dust, 10 ga. CS Heavy Duty Construction, HemiPleat ™ Filter Cartridge, Integrated Magnahelic gage to monitor the pressure drop across the filter, Right or Left Inlet Location, Spark-proof Aluminum Fan, Manual Pulse Controller, The new Gold Series GS-Mini is a single-cartridge dust collector for sub 500 cfm applications where you want a dedicated dust collector for one process machine or as a bin vent on a silo. The GS-Mini incorporates the same cam-lock features and structural strength of the standard Gold Series. A Gold Cone filter cartridge. Fan and manual pulse system are included. Local pick up only. However, I can strap to a skid a shrink wrap, for free. You send your truck to pick up at my commercial address, in las Vegas,NV 89122. I have no dock, but do have a forklift to load.Freightquote.com
Yamazaki Dust Collector for Mazak Laser - Model #DC-30D-NR
Yamazaki Dust Collector for Mazak Laser. Model# DC-30D-NR. Serial# 140903. Flow Rate: 1.600ft³/min. Weight. 848.8 lbs. Used item in good working condition. No longer needed in our manufacturing facility. Item will be loaded onto a skid and secured for shipment. Buyer to pay all related shipping costs. Please ask any questions you may have prior to bidding on this item. See our 100% feedback rating and bid with confidence.
Universal Brand Abrasive Blast Cabinet and Dust Collector
This industrial product was made in the USA and all parts are available to maintain a long and useful life. Universal brand parts are readily available. You can buy new unit at twice the price or fix these few items: Cabinet needs two hoses. Also need a replacement glass with gaskets. The inside glass has been frosted through years of use. I disassembled the glass frame and it will be re mountable with two nuts and washers. Glass gaskets are starting to crack. Two lights inside the cabinet work using standard light bulbs. The motor on the filtration unit runs and all the cloth filters appear to be in good condition. This is a local pickup please. But if needed, I will assist your freight company by preparing the shipment. I will secure the two pieces onto a pallet for the cost of the pallet(less than $20) Thank you for looking at this ad. ... moreOn Jun-06-13 at 01:20:36 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
CRAFTSMAN DOWNDRAFT DUST COLLECTOR TABLE
CRAFTSMAN DOWNDRAFT DUST COLLECTOR TABLE USED NEEDS A GOOD CLEANING.25" X 15"X 7" HOOK TO YOUR VACCUM SYSTEM TO GET RID OF THE DUST WHEN SANDING OR GRINDING YOUR WORK. PAYPAL PLEASE THANKS.
Dust collector 2 HP 3,450 RPM 220v 1 phase on castors
Up for auction is a 2HP Dust Collector system. It is lightly used and runs well. FREE local pickup- up or use the Ebay sshipping calculator Below are the specs. This collector is the ultimate solution to your clean up frustrations. Easily eliminate the finest sawdust. Dirt and debris with this remarkably effective dust collector system. Four swivel casters enable easy transport of your dust collector to anywhere it's needed. If it is not in the photos it does not exist. Canvas bags top and bottom Four swivel casters for easy transport toggle switch mounted on motor 5" diameter intake and 4" diameter exhaust(this hose is missing) Two tees for intakes 4 gate slider valves bench top collection manifold made from heavy gage steel. Amperage(amps) 20 Average air consumption 1550 Capacity 70 gal. Casters Yes Diameter 4 in. Frequency(Hz) ... more60 Horsepower(hp) 2 Phase Single Voltage(volts) 220 Inlet size 4 in. Assembled Overall dimensions 33 in. x 22 in. x 75-1/2 in.
CLEMCO DRY-BLAST HEAVY DUTY BLAST CABINET - #ACDFM w/ BUILT-IN DUST COLLECTOR
aims CLEMCO DRY-BLAST HEAVY DUTY BLAST CABINET- ACDFM w/ BUILT-IN DUST COLLECTOR read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Clemco. This is a used Dry-Blast Heavy Duty Blast Cabinet in working condition. Model# ACDFM Serial# 1370 Features: Foot valve blasting control for ease of operation. Large 16" x 6" window for excellent visibility. Built-In Dust Collector. Specifications: Work Area: 32" x 21" x 24" tall. Arm Holes: 6" diameter. Front Opening: 23" x 16" Motor: 1/2 Horsepower. 115/ 208-230 Volt, 1,725 rpm, 7.4/ 3.9-3.7 Amps, 60 Hz. Electrical: 115 Volt. Single Phase. Overall Dimensions: 33" x 35" x 66" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. ... moreGive us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CLEMCO DRY-BLAST HEAVY DUTY BLAST CABINET- ACDFM w/ BUILT-IN DUST COLLECTOR CLEMCO DRY-BLAST HEAVY DUTY BLAST CABINET- ACDFM w/ BUILT-IN DUST COLLECTOR CLEMCO DRY-BLAST HEAVY DUTY BLAST CABINET- ACDFM w/ BUILT-IN DUST COLLECTOR CLEMCO DRY-BLAST HEAVY DUTY BLAST CABINET- ACDFM w/ BUILT-IN DUST COLLECTOR CLEMCO DRY-BLAST HEAVY DUTY BLAST CABINET- ACDFM w/ BUILT-IN DUST COLLECTOR CLEMCO DRY-BLAST HEAVY DUTY BLAST CABINET- ACDFM w/ BUILT-IN DUST COLLECTOR CLEMCO DRY-BLAST HEAVY DUTY BLAST CABINET- ACDFM w/ BUILT-IN DUST COLLECTOR Reliable Tool Inc. c 2011 | Powered by
KRAEMER KTM52-6-CYN DUST COLLECTOR 2 HP
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 04132310009 Manufacturer: KRAEMER Description: KRAEMER KTM52-6-CYN DUST COLLECTOR 2 HP Capacity: 2 HP Model Number: KTM52-6-CYN Serial Number: 23121CYN Additional Information: BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our eBay listing– BE SURE TO INCLUDE
Torit Donaldson Dust collector Model# 160-HPW
I am the owner of this dust collector. I am not a broker! I can send more pictures if you like, and answer any questions you may have. THE ITEMS ARE SOLD“AS IS. WHERE IS” WITHOUT ANY WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. It is the responsibility of the Purchaser to insure that proper protective guards and other safety features are properly installed and operating on the purchased equipment before and during the operation of this equipment. Seller will load item at no charge. But customer must pickup dust collect at sellers location. Torit Donaldson Dust collector Model# 160-HPW, Pulse Jet bag cleaning. 160 8ft oval bags. 1590 sqft. of filter area. Airlock. Positive seal bolt in cages. Ladder. Walk– In plenum provides weather protection during maintenance. ... moreApproximate dimensions width 102″ x 112″ Data is based on 3rd party information. Could be incorrect, please verify and confirm with manufacturer.
Donaldson Torit Dust Collector/Air Filter VS1500 60 Cycle 5 HP 3 Phase
Used"Like New" Donaldson Torit Dust Collector Specifications: 1500 CFM Clean airflow. 177 sq. ft. filtering surface. Driven by 5 HP. 60 cycle. 3 phase, 3600 RPM motor, 24" wide x 30" deep x 68" tall. Heavy steel industrial cabinet. Multiple port connection inputs. Very handy. keeping work areas clean, safe, healthy and reclaiming your silver and gold. Equipped with 16" diameter x 26" tall cartridge filter. Explosion proof controls. Mounted on casters. This item was bought brand new. Maintained perfectly and in excellent working condition, used for sterling silver and gold dust collection. Let us know if you have any questions about this item. Thanks for looking. This item is available for pickup from our location.
Alanco Environmental Mfg. Dust Collector - Model 124RPL10
ITEM# 11811 Alanco Environmental Mfg. Dust Collector- Model 124RPL10 SERIAL NUMBER: 509F102. COLLECTOR HOUSING DIMENSIONS: 33'5" TALL X 9'6" DIAMETER. CONTACT US FOR MORE INFORMATION. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. ... morePlease be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f2118e9c7-0xfa-
USED ROLFES DUST COLLECTOR
ITEM# 11810 USED ROLFES DUST COLLECTOR ALL CARBON STEEL CONSTRUCTION. DUST COLLECTOR APPROXIMATE DIMENSIONS 39'8"L X 9'8" DIA. APPROX. DIA. OF TOP CROWN AREA ONLY 9' 8" ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please ... morebe aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
Dust Vent down draft table dust collector 4 x 6 work surface, 6000 CFM
Dustvent 4X6 F2· Used Dustvent downdraft dust collector· 4’ x 6’ open face downdraft table· 7.5HP motor/blower rated for 6.000 CFM· 400 sq ft of filter media· Manual shaker filter cleaning system· Dust drawer dust collection· Steel grate top· Average 250 FPM face velocity Please contact Tony with questions at 612-619-1364 or email him at we can load this on a truck at no extra charge Shipping is buyers responsibility. Payment due prior to shipping, above information is to the best of our knowledge and should be verified by buyer. When explosive dusts are present. Owner/operator is responsible for compliance with NFPA 68, 69, 654 and all other applicable codes.
DCE Vokes/Torit UMA450 dust collector 3,000 CFM
DCE Vokes/Torit UMA458G11AD· Used DCE Vokes/Torit bag house dust collector· 450 sq ft of filter media· 10HP motor/blower rated for 4.000 CFM· Mechanical shaker filter cleaning system· Hoppers· Motor controls· Filter bags included(as-is condition) Pressure gage Used dust collectors are subject to availability. Shipping is buyers responsibility. Payment due prior to shipping, above information is to the best of our knowledge and should be verified by buyer. When explosive dusts are present. Owner/operator is responsible for compliance with NFPA 68, 69, 654 and all other applicable codes. Please contact Tony with any questions at 612-619-1364 or email him at We can load this on a truck at no extra charge. Shipping is buyers responsibility. Payment due prior to shipping, above information is to the best of our ... moreknowledge and should be verified by buyer. When explosive dusts are present. Owner/operator is responsible for compliance with NFPA 68, 69, 654 and all other applicable codes. c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13f211fae44-0xf8-
Torit UMA 450 dust collector 3,000 CFM VERY NICE!
Torit UMA450· Used Torit bag house dust collector· 450 sq ft of filter media· 10HP motor/blower rated for 2.500 CFM@ 8” ESP· Mechanical shaker filter cleaning system· Hoppers· Motor controls· Filter bags included(as-is condition) Pressure gage Please contact Tony with any questions at 612-619-1364 or email him at We can load this on a truck at no extra charge. Shipping is buyers responsibility. Payment due prior to shipping, above information is to the best of our knowledge and should be verified by buyer. When explosive dusts are present. Owner/operator is responsible for compliance with NFPA 68, 69, 654 and all other applicable codes.
4 Stage industrial dust collector filter housing
Industrial 4 Stage Dust Collector Filter Housing Dimensions Length: 92" Width: 54" Height: 105" Escape: 19" Diamater Entrance: 16"x28" Uses(8x)24x24x4 AND(8x)24x24x12 Filters. Buyer must arrange and pay for freight. Local Pickup is available at zip code 45039 Residents of Ohio pay a 6.5% tax. All items are Sold"As Is" No Warranty. Items must be picked up within 30 days or the items will be considered forfeited to us. I will consider all reasonable offers on any of my store items. Check out my! New items posted daily!
VINTAGE SILVER Bench-Top Dust Collector
UP FOR AUCTION Bench-Top Dust Collector WAS PLUGGED IN AND BLOWER CAME ON MAY NEED TO BE CLEANED OR MOTOR MAY NEED TO BE SERVICED BUT DOES TURN ON AND AIR BLOWS OUT THE BACK HAS DENTS AND SCRATCHES TO METAL CASE MAY HAVE SCRATCHES FROM USE PLEASE LOOK AT PICTURE COMES AS PICTURED Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
Dental Lab Equipment: Vaniman Dust Collector w/ Accumulator, Vacuum
Used in good working condition. As is
1 DELTA 50-850 1-1/2 HP 1200 CFM Vertical Bag Dust Collector 115V 1 Phase
DELTA 50-850 1-1/2-Horsepower 1200 CFM Vertical Bag Dust Collector 115V 1-Phase This auction is for a DELTA 50-850 1-1/2-Horsepower 1200 CFM Vertical Bag Dust Collector 115V 1-Phase. This was in a contractor that closed. We disconnected it from power and it worked when we took it out. This unit is in good shape and should be ready for work. This unit is standard current and plugs into a standard outlet. If you have any questions at all please feel free to ask. Below was copied off the web: The DELTA 50-850 1.5 HP 1200 CFM Vertical Bag Dust Collector features a volume-saving vertical design that doesn't compromise the power of its completely encased 1.5 HP motor. Which moves up to 1,200 cubic feet of air per minute by employing curved steel impellers for durability and maximum air velocity. The vertical dust collector sits on a sturdy ... moresteel base, and four glide wheels that can move anywhere in your shop without damage. The durable plastic collection bag can be mounted on one of two rings. The upper bag can filter out pollutants 5 micron in size-contaminants that your eyes can't see but your lungs will thank you for. In addition, you can upgrade your machine to five- or one-micron filter bags. The 6-cubic-foot collection bag is a 6-mil durable plastic that allows you to see when the bag needs changing. Exhaust is filtered through the filter bag rather than the collection bag to prevent air from escaping. The dust collector includes four swivel caster assemblies, a cord, a plug. DELTA 50-850 1-1/2 Horsepower 1200 CFM Vertical Bag Dust Collector. 115-Volt 1 Phase Powerful. Induction motor for long-lasting, smooth performance; totally enclosed to protect it from damaging dust 6-milimeter plastic collection bags offer large chip capacity and easy disposal Curved steel impeller produces maximum air velocity for efficient dust collection Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way Utilizes clear 6-mil durable plastic bags for changing ease TERMS
Makita 5057KB 7-1/4" Circular Saw with Dust Collector, James Hardie Siding Saw
This saw is in pretty good shape. A little dusty from cutting cement board siding, base plate is in great shape, still has cement board blade installed, cord is in good shape also, we will ship this item out UPS ground, within one day after payment is received, thank you a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13f239a6561-0xfb-
TORIT / DONALDSON DUST COLLECTOR model 84 3 HP 230 / 460 Volts 3 phase USA
Good Used Dust Collector Torit/ Donaldson Minnesota. USA Model 84 60 Cycle 3450 RPM 3 HP 230/460 VOLTS 3 Phase if shipping there will be a $50 charge to pallet. Band and shrink wrap as needed for a shipping quote call Jack Becker at 1-800-323-5441 ext 1951 or JBECKER at freightquote. com. tell him approx. 460 lbs on a pallet 4' x 4' x 5' high from R and T Tooling or pickup in Milroy Indiana zipcode 46156 and i will load for free Powered by The free listing tool. List your items fast and easy and manage your active items.
Shaper (Powermatic) and Dust Collector (JET)
Shaper Powermatic 2700. And Dust Collector JET 1100 CFM. Integrated caster system built into the cast iron base for instant shop mobility. Spindle height digital readout for making fine incremental adjustments on multiple passes. Heavy duty 30 x 40 inch precision ground tabletop for smooth stock feeding. Convenient quick lock belt tensioning for easy speed adjustment. Industrial fence system with fine adjust dials for more precise positioning. 5HP totally enclosed motor offers plenty of power. Two spindle speeds(reversible) for a variety of work. Superior clear cutter guard promotes safety. Allows observation of the entire cut. Table predrilled and tapped for feeder mounting in two locations. Fence has dual featherboards for work holding. Dual 4" ports for attachment to dust collection system. 3/4" and 1-1/4" interchangeable ... morespindle collets. Spindle height digital readout. Featherboard hold downs. Deluxe miter gauge. Integrated caster system. Includes JET 1100 CFM Big Dust Collector. Call in English(954) 805-1948. In Spanish(561) 479-9833.
Central Machinery 1hp Dust Collector Model S31810 110v 1ph NEW IN BOX
Central Machinery 1hp Dust Collector Model S31810 110v 1ph NEW IN BOX You are buying a Central Machinery 1hp Dust Collector Model S31810 110v 1ph NEW IN BOX. It is brand new in box. Buyer to pay shipping and handling costs for FEDEX Ground to lower US or Canada. International orders require shipping via postal service. Use shipping calculator to calculate shipping to your location. If you are not satisfied with your auction item. For any reason, please feel free and return it for a full refund of your purchase price. If you are not happy, we are not happy. Powered by f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f2fb046da-0x102-
MURPHY ROGERS DUST COLLECTOR FILTRATION SYSTEM BAG STYLE TORIT SHOP FOX GRIZZLEY
NO RESERVE! HERE IS A NICE RUNNING. LIGHTLY USED MURPHY ROGERS DUST COLLECTOR SYSTEM. THIS DUST COLLECTOR CAN BE INSPECTED IN MPLS MN. TO SET UP AN INSPECTION, PLEASE CALL JIM@ 952-931-7974. THANK YOU. GENERAL SPECIFICATIONS: MAKE.MURPHY ROGERS MODEL.MRY 7 AT SERIAL NO.1119 HP.3 HP CFM.UNKNOWN ELECTRICS.208/220/480/3PH OVERALL DIMENSIONS.46" X 33" X 73 H WEIGHT.APPROX. 600 LBS THERE WILL BE AQ $35.00 PALLETIZING FEE ADDED TO THE PURCAHSE PRICE. WE WILL LOAD FOR FREE TO GET FREIGHT QUOTES MY ZIP CODE IS 55343. IF YOU WOULD LIKE US TO GET A FREIGHT QUOTE. PLEASE CALL.
ENCO 150 3020 DUST COLLECTOR WITH YOUBA MOTOR INDUSTRIAL MACHINE SHOP FACTORY
HELLO- YOU ARE PURCHASING THE PICTURED ENCO DUST COLLECTOR. IT IS USED. WE HAVE NO WAY OF TESTING THIS ITEM. IT CAN BE RETURNED FOR A FULL REFUND BUT THE BUYER PAYS ALL SHIPPING COST BOTH DIRECTIONS. LABELING ON THE ITEM READS. PLEASE SEE PICTURES FOR DESCRIPTION. PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES! I USUALLY SHIP(95% OF MY LISTINGS SAME DAY IF PAID FOR BY 3:00 P.M. EST. PLEASE EMAIL ME OR CALL 937-475-3068 TO VERIFY I SEE YOUR PAYMENT IF YOU NEED YOUR ITEM SHIPPED SAME DAY. I WILL COMBINE SHIPPING WHENEVER POSSIBLE. I WILL SHIP WORLDWIDE. THANK YOU! O STOCK
KUFO SENCO UFO 102B DUST COLLECTOR INDUSTRIAL MACHINE SHOP FACTORY WITH MOTOR
HELLO- YOU ARE PURCHASING THE PICTURED KUFO SENCO DUST COLLECTOR. IT IS USED. WE HAVE NO WAY OF TESTING THIS ITEM. IT CAN BE RETURNED FOR A FULL REFUND BUT THE BUYER PAYS ALL SHIPPING COST BOTH DIRECTIONS. LABELING ON THE ITEM READS. PLEASE SEE PICTURES FOR DESCRIPTION. PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES! I USUALLY SHIP(95% OF MY LISTINGS SAME DAY IF PAID FOR BY 3:00 P.M. EST. PLEASE EMAIL ME OR CALL 937-475-3068 TO VERIFY I SEE YOUR PAYMENT IF YOU NEED YOUR ITEM SHIPPED SAME DAY. I WILL COMBINE SHIPPING WHENEVER POSSIBLE. I WILL SHIP WORLDWIDE. THANK YOU! O STOCK
KEI MODEL 2120-1 DUST COLLECTOR
KEI MODEL 2120-1 DUST COLLECTOR BALDOR SINGLE PHASE 2 HP USED WILL SHIP MOTOR FREIGHT. EMAIL FOR SHIPPING QUOTE
Oliver table saw, Oliver planer, 2HP Dust collector with dust collection pipes
NOTE: THIS LISTING IS ONLY FOR THE 2HP DUST COLLECTOR AND DUST COLLECTOR PIPES(PLASTIC AND METAL) PICK UP ONLY. CASH ONLY OR USPS MONEY ORDER"NO PAYPAL, ONLY ACCEPTING PAYPAL IF YOU PAY THE FEES. Interested in starting your own cabinet shop! I have all the machinery needed, please see my other items.The Dust collector is used but in good working condition. Please copy and paste the following link for information for this item.harborfreight.com/2-hp-industrial-5-micron-dust-collector-97869.html The current pictures on the post are the best that I could get because the container(Size 8' X 20' is so full that I can barely move inside. We can set up an appointment for you to see items in person. Thank you. This item is used and sold as-is. It was removed from an operating environment and placed in storage. NOTE: SHIPPING is NOT AVAILABLE ... morefor this item- LOCAL PICKUP ONLY. Due to the location of this item, this item can not be shipped. The item can be prepared for pickup. Item must be removed AS-IS. Buyer must pickup at location and must be prepared to remove the item at their cost and with their own resources.
Vacume dust collector Impeller fan 11" 5 blade steel
Impeller for vacuum dust collector blower 11 inches round 5 blades 7/8 arbor hole 4" tall blades Steel Posted with
Best Deal on a Spencer Industrial Vacuum / Dust Collector
These typically sell in upwards of $2.000.00! This is a Spencer Vacuum/ Dust collector/ Bag House It has a removeable container at the bottom for ease of emptying. Here are the specs. Spencer Central Vacuum. Serial# 303275 210 CFM 4inches Hg General Electric 7.5 HP 3500 Rpm 3 Phase Has a 4 inch inlet and outlet. Its dimensions are as follows. 74" Tall x 60" Long x 30" Wide The castors are not included. Item sold as is. If you are in the Sacramento area I can deliver for a small Fee. Or if you would like to make other shipping or pick up arrangments please let me know. Thank you and Happy shopping. Posted with f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f35fdbed7-0x100-
Dayton Dust Collector Model 3Z002A, 3 PH, 2 HP
Dayton Dust Collector: Model 3Z002A. 3 PH, 2 HP. 1000 CFM. 220/440 V, 60 HZ. Three Phase Motor: Model 3N238B. 2 HP. 3450 RPM. Volts: 208-220/440. FLA: 5.8-5.4/2.7. FR: G56C. HZ: 60. PH: 3, KVA Code: J. INS: B. Max AMB: 40 degrees C, Duty: Cont. SF: 1. MTR REF: R69689B. Unable to test on 3 PH. Unknown if operational. Weight: 60 lbs approx. Dimensions: 27" x 30" x 16"T approx. All items are sold AS IS and as shown without warranty. This does not mean the item doesn't work. Only that we have not tested it and/or do not have the capability to test it. Payment must be made within 4 days* We want you to be completely satisfied with your order. Please contact us should you have any concerns so that we can immediately address them. If you have questions you can reach Wade at 503-730-3131. Pacific Standard Time.
Donaldson Torit Dust Collectors, Model- 84. Torit dust collector
Specification Description Manufacture, Donaldson Torit, Model, 84, Serial# 179629-2, Electrics, 208/230/460V, Phase, 3 Phase, RPM, 3.600 RPM, Approximate Dimensions, 30" x 35" x 65"H, Approximate Weight, 500 Lbs. NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. Need help with Questions on shipping or assistance with this machines specifications? Feel Free to call us direct at 847-338-7139… ask for Erik J. Myers.
Dust collector motor and fan
Here is a industrial duty dust collection fan in great condition. It has a 6 inch inlet. 5 inch outlet and a 1 hp motor/ 110v. This is a local pickup. Feel free to ask questions. Thanks for looking.
DONALDSON TORIT DOWNFLO DUST COLLECTOR 2DF8 ~GREAT DEAL~
DONALDSON TORIT DOWNFLO DUST COLLECTOR 2DF8 Frate and costs associated are responsible of the buyer. Contact us with any questions! Thank you and be sure to check out our other items!
Spencer Turbo-Blower Dust Collector 30 HP - WithTubular Tank Separator
Gold International Machinery Corporation | Spencer Turbo-Blower Dust Collector Our Inventory Number: 9058-550 Technical Specifications: 230V/ 3 Ph/ 60Hz, Capacity: 2500 CFM, Motor: 30 HP, Equipped With: Tubular Tank Separator, This item is in very good condition! We can palletize. Cover and load this item for an additional fee. Please inquire. We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering ... moreState-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal business hours(9am-5pm EST) Monday through Friday at 1-800-619-GOLD. Please ask to speak with David Gold. However. We do recommend that you first send us an E-Mail with your questions. Phone(M-F 9am-5pm EST) 1-800-619-GOLD(4653) Please E-Mail David Gold anytime at. Please note that freights costs ar
JEWELRY POLISHING GRINDING MACHINE DUST COLLECTOR DOUBLE STATION ARBE EUC
This machine is BARELY USED. I only bought it to grind my wedding ring and thats it. I thought I could use it for more metalsmithing projects. But its just collecting dust. I used it less than 30 hours for sure. Included is one cratex wheel super fine. I will include an extra adpater for the second station. It is practically in mint condition! The dust collector and light bulbs and the left station have never been used. The right station has the cratex grinding wheel-the Adapter is fused to the machine, not the whole wheel! So you can still exchange out different wheels and such. The adapter is a 1/2" hole. It should cause no problems what so ever! 1/2HP Suction Motor. 110V 1/2HP. 3450 RPM Polishing Motor, 110V 165 CFM Dimensions: 22-1/2" W x 19" D x 12" H Weight: 57 Lbs. Squirrel Cage Blower Provides Strong Suction Sealed ... moreand Insulated Dust Cabinet Provides Maximum Dust Collector Double spindles allow to use 2 different wheels: one on each side. Thus saving time and allowing to use two different processs practically simultaniously Quick and Easy Filter Replacement Two Inner Light Bulbs provides excellent visibility I will upload an actual photo asap.
Delta 50-775 Dust Collector 1HP, 1Ph, 115V Modal AP400
Used very little. Like new condition. FREE SHIPPING WITH BUY NOW.
3 HP DUST HOG PORTABLE DUST COLLECTOR 208-230/460v, 3ph
J LITTLE MERCER CO. 3 HP DUST HOG PORTABLE DUST COLLECTOR Stock Number: G-3344 Cartridge type. 2) cartridge 3 Hp blower. 208-230/460v, 3ph 8 inch top inlet o/a 5 ft. x 30 inch x 5 ft. tall on wheels Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
Whirl-Air Flow Vacuum/Dust Collector 440 Vac 30 Amps Serial# 89-2104-225
Whirl-Air Flow Vacuum/Dust Collector 440 Vac 30 Amps Serial# 89-2104-225 THIS IS A WHIRL-A-VAC DUST COLLECTOR THAT HAS SOME WEAR AND TEAR. IT WILL REQUIRE SO CLEANING BUT WAS REMOVED FROM A WORKING SYSTEM. IT HAS A HEDLUND BLOWER AND AN AC RELIANCE DUTY MOTOR. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS, EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50% SEE PICTURES ABOVE AND DETAILS BELOW FOR ADDITIONAL DETAILS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-906-1385. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: Serial# 89-2104-225 440 Vac 30 Amps MOTOR 10 HP. 1755 RPM, 230/460 VOLTS, 27/13.5 AMPS, 3 PHASE, 60 HZ OVERALL DIMENSIONS: WIDTH: 52" LENGTH: 80" HEIGHT: 82" SHIPPING WEIGHT: 1000 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19606) ... moreFACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT
UAS Dust Hog FFBW-DC-EXT Dust Collector with Filters - Mfg. Jan. 2003
UAS Dust Hog FFBW-DC-EXT Model FFBW-DC-EXT. S# 60052831, Date Mfg. Jan. 2003, Supra Clean Pulse System control, 12 Filters included(Part# 33-0290/33-0324) Blower motor 3hp 230/460v 3ph 60hz 1,750 rpm 4.8 amps, Overall Dim. 5'W x 5' 2"L x 10' 4"H Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until ... morepayment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
Wolverine Corporation Downdraft Table Bench Dust Collector
Wolverine Corporation Merrimac. Ma 01860 Downdraft Table Vacuum Table Dust Collection Equipment Dust Collection System Model: 1-12 Serial Number: BT-48 5HP Electric Motor 1740 RPM 208-240V 48" Rotating Table for Ease of deburring large parts Table rated for at least 1,000 lbs. There are(2) available. We get really good rates for shipping if necessary we can quote to save you money.
DONALDSON TORIT DUST COLLECTOR MODEL SDF4, 4800 CFM- EXCELLENT CONDITION
Y OU ARE BIDDING ON(1) USED DONALDSON TORIT DOWN FLOW DUST COLLECTOR SPECIFICATIONS: Make: DONALDSON TORIT Model No: SDF4 Serial No: 1G41080 CFM: 4800 FILTERS: 4 FILTERATION AREA: 1648SF Motor: Lamson Multi Stage Centrifugal Mode: TST-715 S/N: S97005 HP: 15 RPM: 3505 TOTAL APPROX. WEIGHT OF UNIT: 1000 LBS. TWO OF THESE TORITS ARE AVAILABLE. THESE ARE IN PERFECT CONDITION. LIKE NEW! I WILL OFFER A DISCOUNT, IF INTERESTED IN PURCHASE OF MULTIPLE UNITS. THIS ITEM IS CURRENTLY IN PLACE AT THE PLANT LOCATION: PFIZER-PEARL RIVER, NY. BUYER RESPONSIBLE FOR REMOVAL AND TRANSPORT. IF BUYER, WOULD LIKE ITEM REMOVED AND PACKAGED FOR SHIPPING, ADDITIONAL FEES WILL APPLY. PLEASE CONTACT FOR PRICING. BEST OFFER'S WILL BE CONSIDERED. PLEASE CONTACT IF INTERESTED Please EMAIL OR CALL Michele at(860)662-1495. For additional Item information or for a Shipping ... moreQuote Request. Thank-you for your interest and for looking at this item. This ITEM is being sold as is. Where is with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected the ITEM and to have satisfied himself or herself, as to the condition and value; to bid based upon that judgment solely. Please view our Payment Options. In this listing. We accept PAY PAL. Major credit cards(Visa, MasterCard, American Express and Discover) electronic checks as forms of payment. Payment required with(5) days of Auction End or Buy-It-Now Listings. Buyer is responsible for pickup or shipping of this ITEM. PLEASE CONFIRM AUTOMATED SHIPPING ESTIMATE. BEFORE PLACING A BID. If you wish to have it shipped using our FREIGHT service. We will gladly coop
Kufo UFO-102B, 3HP, 3Ph, 220V 1,925 CFM Dust Collector Mfg. 06/2003
This is a used Kufo UFO-102B. 3HP, 3Ph, 220V 1925 CFM Dust Collector, 10.5 Cubic Ft Bag Volume Comes as shown on the pictures This item can be picked up in Upland CA or shipped by freight company. Buyer responsible for shipping and handling cost. Packing or crating will incur additional charges. Please send me a message for quotes if interested in this machine. Thank you! Posted with
Kufo UFO-102B, 3HP, 1PH, 220V 1,925 CFM Dust Collector Mfg. 01/2012
This is a barely used Kufo UFO-102B. 3HP, 1PH, 220V 1,925 CFM Dust Collector, 10.5 Cubic Ft Bag Volume Comes as shown on the pictures This item can be picked up in Upland CA or shipped by freight company. Buyer responsible for shipping and handling cost. Packing or crating will incur additional charges. Please send me a message for quotes if interested in this machine. Thank you! Posted with
110HP ROGER MURPHY DUST COLLECTOR
Roger Murphy 10HP dust collector with muffler(not pictured) High-Volume Two-Stage Dust Collector 10hp, 208/240/480 VAC, 3 phase. The dust collector comes with a 55 gal drum and cover.
Tempest 5 hp Cyclone Dust Collector
Tempest 5 hp 3 phase elec. 1800 C.F.M. 15 inch Impeller. Comes with 2- 50 gallon drums and approx. 70 feet of spiral piping and fittings. Buyer to arrange pick up.
Handler Red Wing High Bench Grinder Dust Collector Dental Polishing Lathe
Handler Red Wing Dental Grinder/Polisher and Dust Collector. In great working condition. Local pick-up only or e-mail for freight or motor only sales. Grinder/Polisher Model- HD-2 HP- 1/4-1/6 115V cyc 60 1 Phase RPM- 3450/1725 Frame- 116 Type- 60Z3 Amps- 3.3/3.3 ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13f45c17ba4-0xf2-
Torit Dust Collector 484RF10 (aka Torit Donaldson)
Torit Dust Collector 484 RF 10 Filter Bag House 484 10ft filter bags for a total of over 6000 sq.ft. filter media, 200 motor with NYB fan size 44ACF, A rare fully enclosed lower support structure with double doors for easy and dry access to airlock and hopper, 7.5HP Tuthill PD pump for reverse pulse air filter cleaning, walk in plenum, 60 degree hopper. Ladders and platforms, explosion vents, Also includes Clarkes CM49 abort gate. LMC transfer fan, Clarkes spark detection, Extra set of bags available, Price includes dismantling and loading on your trucks. Call or email for an estimated freight cost. Visit our Website@ http:machineryscene.com/ We have Abort Gates. Airlocks/Feeders, Baghouses/Dust Collectors, Blowers/Fans, Blowers Positive Displacement, Chips Screens/Screeners, Converyers, Cyclones, Electrical Components, Hammer Mills/ Hogs, ... moreMaterial Handling, Plywood Equipment, Scissor Lifts, Spark Detectors. Purchase prices do not include shipping. Crating or skidding. Please contact Seller to make shipping arrangements for your equipment, or for shipping/crating/skidding quote. Purchase prices do not include any federal, state, or local taxes. Buyer is responsible for determining if such sales tax is applicable and remitting such tax to the governing authorities. Unless otherwise stated herein. The Equipment will be sold FOB Origin.
6" D Spiral 81 1/2" L Ducting Commercial Dust Vent Collector System Galv Metal
OVERSTOCK Description 6" D Spiral 81 1/2" L Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines outstanding ... moredesigners. Engineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specified. Therefore you
2" x 3" Reducer Ducting Commercial Dust Vent Collector System Galv Metal
OVERSTOCK Description 2" x 3" Reducer Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines outstanding designers. ... moreEngineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specified. Therefore you know
6" x 10" Short Reducer Ducting Commercial Dust Vent Collector System Galv Metal
OVERSTOCK Description 6" x 10" Short Reducer Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines outstanding ... moredesigners. Engineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specified. Therefore yo
5" x 5 1/2" Reducer Ducting Commercial Dust Vent Collector System Galv Metal
OVERSTOCK Description 1 5" x 5 1/2" Reducer Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines outstanding ... moredesigners. Engineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specified. Therefore you
6" x 4" x 4" x 4" Y-Branch Ducting Commercial Dust Vent Collector System PC
OVERSTOCK Description 6" x 4" x 4" x 4" Y-Branch Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines ... moreoutstanding designers. Engineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specified
6" D Spiral 96" L Ducting Commercial Dust Vent Collector System Galv Metal
OVERSTOCK Description 6" D Spiral 96" L Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines outstanding designers. ... moreEngineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specified. Therefore you kno
8" x 12" x 9" 45° Lateral Tee Ducting Commercial Dust Vent Collector System PC
OVERSTOCK Description 8" x 12" x 9" 45° Lateral Tee Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines ... moreoutstanding designers. Engineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specif
5" D Spiral Ducting 16" L Ducting Commercial Dust Vent Collector System Metal
OVERSTOCK Description 5" D Spiral Ducting 16" L Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines outstanding ... moredesigners. Engineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specified. Therefore
14" x 12" x 9" 45° Taper on Tee Ducting Commercial Dust Vent Collector System PC
OVERSTOCK Description 14" x 12" x 9" 45° Taper on Tee Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process ... morecombines outstanding designers. Engineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise spec
10" D Spiral 106 1/2" L Ducting Commercial Dust Vent Collector System Galv Metal
OVERSTOCK Description 10" D Spiral 106 1/2" L Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines outstanding ... moredesigners. Engineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specified. Therefore y
10" x 8" x 4" 45° Tee on Taper Ducting Commercial Dust Vent Collector System PC
OVERSTOCK Description 10" x 8" x 4" 45° Tee on Taper Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process ... morecombines outstanding designers. Engineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise speci
12" x 8" x 4" Y-Branch Ducting Commercial Dust Vent Collector System Galv Metal
OVERSTOCK Description 12" x 8" x 4" Y-Branch Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines outstanding ... moredesigners. Engineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specified. Therefo
Ducting Commercial Dust Vent Collector System Galv Metal t4" D Spiral 92" L
OVERSTOCK Description 12" 4" D Spiral 92" L Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines outstanding ... moredesigners. Engineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specified. Therefor
4" D Spiral 120" L w/ 90 Angled Ducting Commercial Dust Vent Collector System PC
OVERSTOCK Description 4" D Spiral 120" L w/ 90 Angled Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines ... moreoutstanding designers. Engineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specified. The
4" D Spiral 34" L Ducting Commercial Dust Vent Collector System Galv Metal
OVERSTOCK Description 4" D Spiral 34" L Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines outstanding designers. ... moreEngineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specified. Therefore you kno
5" D Spiral 45" L Ducting Commercial Dust Vent Collector System Galv Metal
OVERSTOCK Description 5" D Spiral 45" L Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines outstanding designers. ... moreEngineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specified. Therefore you kno
10" x 12" Reducer Ducting Commercial Dust Vent Collector System Galv Metal
OVERSTOCK Description 10" x 12" Reducer Ducting Piece for Commercial Dust Collection System Diecast/Galvanized Metal Good Condition* new these ducting pieces cost a fortune.these are only gently used and will work just as good as a new piece but. At a fraction of the cost! Our Inventory We currently offer hundreds of items for sale dueto overstock. And overproduction atour warehouse. This gives the consumer anopportunity to shop for bulk and business-related items conveniently,and allowing us to liquidate our inventory. Items change frequently andare limited to the quantity on hand. We offer on eBay. However. If you don't see it listed,please ask.we have available. Seller has the right to endauction early the item is soldlocally. About Us Sympateco Inc. is located in Omaha. NE. OurOpen-Ready ™ Process combines outstanding designers. ... moreEngineers, manufacturing, project management, and logistics/installation services to retail rollout clients. Our vision is to redefine the quality, function,fit, and finish of cabinets and case goods; to us, gettingyou Open-Ready ™ is an art! THE PRODUCTS WE OFFER CHANGE ALL THETIME. MAKE SURE TO ADD US TO YOUR AND CHECK BACK OFTEN FOR THE BEST SELECTION! PAYMENT Paymentinstructions are as follows: All items must be paid for within 7 Daysafter item is closed. We take paypal and payment in person(if item isbeing picked up locally. Buyers need to notify us in advance of theirintentions to make payment on pick up. SHIPPING DETAILS We make everyattempt to ship item within 4 days of confirmation of payment(excludingSaturdays and Sunday. We ship our items UPS Ground or USPS. what ever service will be the most cost effective for the buyer. All payments must be verified before item is shipped. Please expect 7-14 days for delivery unless prior arrangements have been made RETURN POLICY Returns areaccepted if item does not work or is grossly misrepresented. All itemsare tested; unless otherwise specified. Photos taken are of actual item(unless otherwise specified. Therefore you kno