In 
 
Order by: 
Available to: 
Price: 
 - 
$
629.99
Buy It Now
$0 Shipping
Condition: New
Location: Toledo,OH,USA
$
2,750
Buy It Now
$0 Shipping
Condition: Used
Location: Toledo,OH,USA
$
569.99
Buy It Now
$0 Shipping
Condition: New
Location: Erie,MI,USA
$
2,922.48
Buy It Now
$0 Shipping
Condition: New
Location: Minooka,IL,USA
$
26,299
Buy It Now
$0 Shipping
Condition: New
Location: La Vergne,TN,USA
Jet 320037 J-1230R-4 4' Arm Radial Drill Press The power train gears and spline shaft are made of the finest quality. Heat treated and ground nickel-chrome ... moresteel, giving extra strength and smoothness to high torque loads, The spindle is made of the finest case hardened steel for extra strength and wear, The spindle is supported by double row taper roller and thrust ball bearings at the nose. With thrust and radial axis bearings at the top, The spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy, Push button controls are all reduced to 110V, Electrical circuits are located in the built-in control box at the rear of the arm- this keeps the contols dust and humidity free while making them easily accessible for maintenance, Entire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobs, Arm raising safety device prevents arm from dropping, Suggestion: Make an offer for 2 or more on lower priced items, Motor: 2-1/2 to 5 HP. 460V, 3 Ph, Number of Spindle speeds: 12(44- 1500) Spindle Taper: MT-4, Max Distance Spindle to Table( in. 37-1/2, T-Slots Number and Size(in. 3& 3/4, Column Diameter(in. 11-13/16, Drilling Capacity Cast Iron(in. 2-5/16, Drilling Capacity Mild Steel(in. 1-7/8, Tapping Capacity Cast Iron(in. 1-1/2, Tapping Capacity Mild Steel(in. 1, Boring Capacity Steel(in. 3-3/8, Boring Capacity Cast Iron(in. 4-3/4, Distance Column to Spindle(max/in. 46, Distance Column to Spindle(min/in. 13-3/4, Travel of Head Horizontal(in. 35, Distance Base to Spindle(max/in. 54, Distance Base to Spindle(min/in. 19-3/8, Arm Travel Vertical(in. 35, Quill Travel(in. 9-7/8, Quill Travel w/ Powerfeed engaged(in. 9-7/16, Quill Down feed Rates(IPR) 3(002. 004, 006) Elevating Motor: 1 HP, Base Dimensions(in. 67-3/4 X 28 X 7, Coolant Pump Motor: 1/8 HP, Machine Height from Floor(in. 109-1/2, Table Dimensions(in. 25 x 20-1/2 x 16-15/16, Counter balanced mechanism for spindle
$
100
3d 10h 30m 42s
0 bids
Free Shipping
Condition: Used
Location: East Wenatchee,WA,USA
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 ... morefalse false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE OLD CANEDY FLOOR DRILL PRESS POWER FEED. 4 MT SPINDLE I.D. B-302(BUYER PAYS FOR SHIPPING TO BE DETERMINED BY LOCATION OF THE WINNING BIDDER- UNIT LOCATED IN ZIPCODE 94545) FOR MORE INFORMATION PLEASE CALL ED SCHLICK AT: 510 506-1752 M-th cell. Or 510 506-1752 M-Th office 530 336-6813 Fri and Sat WEBSITE LOCATED AT: PACIFICMACHINERYEXCHANGE.COM WAREHOUSE LOCATED AT 3402 ENTERPRISE AVE. HAYWARD. CALIFORNIA 94545* TERMS AND CONDITIONS* SALES Your bid is a contract. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within three days of the end of the auction, or if payment isn’t received within three days of the invoice date, item may be offered to the next highest bidder or re-listed at the sellers’ discretion. For industrial machinery. Please do NOT pay until you are invoiced! PAYMENT TERMS Pacific Machinery Exchange accepts PayPal. Cash, cashier’s checks, wire transfer, and major company checks. Money Orders. Cashiers checks of more than $1,000.00 U.S. Dollars must be sent via FedEx Priority Overnight, UPS Next Day Air or UPS Overnight Certified Mail. Money Orders and Cashiers Checks are to be made out and sent to: PACIFIC MACHINERY EXCHANGE 3402 ENTERPRISE AVE HAYWARD. CA 94545 CALIFORNIA STATE SALES TAX APPLIES TO ALL STATE RESIDENT
$
525.45
Buy It Now
$0 Shipping
Condition: New
Location: China
$
2,795
Buy It Now
Free Shipping
Condition: New – Open box
Location: Auburn,WA,USA
$
3,600
Buy It Now
$0 Shipping
Condition: Used
Location: Gardnerville,NV,USA
$
602.79
Buy It Now
$0 Shipping
Condition: New
Location: China
$
490
Buy It Now
Free Shipping
Condition: New – Open box
Location: Venice,FL,USA
$
794.99
Buy It Now
$0 Shipping
Condition: New
Location: Toledo,OH,USA
$
1,817.6
Buy It Now
$0 Shipping
Condition: New
Location: Minooka,IL,USA
$
1,012.49
Buy It Now
$0 Shipping
Condition: New
Location: Norwalk,CA,USA
$
2,895.9
Buy It Now
$0 Shipping
Condition: New
Location: Minooka,IL,USA
$
1,500
Buy It Now
Free Shipping
Condition: Used
Location: Harrison,NJ,USA
$
350
Buy It Now
Free Shipping
Condition: Used
Location: Milwaukee,WI,USA
$
3,500
Buy It Now
Free Shipping
Condition: Used
Location: Coffeyville,KS,USA
$
4,999
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
$
525
Buy It Now
$0 Shipping
Condition: Used
Location: DeKalb,IL,USA
$
1,862.59
Buy It Now
$0 Shipping
Condition: New
Location: Minooka,IL,USA
$
2,284.37
Buy It Now
$0 Shipping
Condition: New
Location: Minooka,IL,USA
$
2,450
Buy It Now
Free Shipping
Condition: Used
Location: Portland,CT,USA
$
1,560.39
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
81
Buy It Now
$29 Shipping
Condition: Used
Location: Wallingford,PA,USA
$
1,750
Buy It Now
Free Shipping
Condition: Used
Location: Cedarburg,WI,USA
$
169.99
Buy It Now
$0 Shipping
Condition: Used
Location: Milford,CT,USA
ebay template Dayton Drill Press Vise Item Specifics: Model: 4TK04 Size: 6in. Retail Price: $133 Condition: New Features: Jaw Deflection: 0.002" ... more2000lbs. Fixed Base Packaging Condition: Distressed*All dimensions are approximate We do not offer combined shipping on this item. This guarantees that each individual product is packed properly and safely and has its own tracking number for transit. We only ship to the Paypal confirmed address Please note: we do not allow for anyone to arrange their own shipping on products we sell. All items mus t be either locally picked up by customer. Or shipped using one of our shipping methods. Your item will be shipped in 2-4 business days after payment has been received. Please note Due to size. Weight, value, or risk of damage to this item, we are unable to offer combined shipping or multiple item shipping discounts. All items will be shipped separately. We apologize for this inconvenience. To get a Correct and Accurate shipping quote to your destination. Enter your country and zip/postal code information into the shipping calculator. Insurance& handling are included in the shipping amount. International Shipping Avalible to Select Countries Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. ALTHOUGH USPS may be a few dollars higher the fees. Duties, tarriffs and taxes are nowhere near the cost of other shippers. Please take this under consideration when choosing your shipping needs. We only ship via Express USPS and UPS World Express to International Destinations. We SHIP TO THE USA. Canada, APO and FPO addresses and SELECT International Countries. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on
$
1,125
Buy It Now
$280 Shipping
Condition: New
Location: China
Pay attention: About voltage and plug.We ship according to your country standard. If you have special needs.Please leave us an ebay message before payment. ... moreDrill bit is not included. Features: 1. Suitable for the use of core drills.Twist drills,with tapping function. 2.Max. drilling diameter:130mm 3.No-load speed r/min: 100-200/360/640 4. Durable oil-immersed gear 5. Electronic o verload protection- protects the motor against overheating. 6.Softstart- electronic current limiter ensures a softer start 7.Water cooled gearbox 8. CE/ ROHS/ ISO90001:2008 certified Parameter: Product model KCY-100/3WDO KCY- 130/3WDO Max. core drill dia Φ100 Φ130 Max. twist drill dia Φ28 Φ32 Max. tapping dia, M26, M28, Rated voltage 110/220 110/220 Max. attraction 17600, 18600, Rated frequency 50~60 50~60 Rated input power 2380 2690 No-load speed 100-240/430/780 100-200/360/640 Contact us: We are the professional drilling machine manufacturer in China. We offer discounts for quantity order. Please contact us before making purchase. If you have any questions regarding this product. Please don’t hesitate to send us an ebay message or contact us by the following: Tel:+86 21 66550688-810 Skype:cayken4 QQ: 2880158128 E-mail:sale013@cayken.com.cn Shipping policy: Items are typically shipped within 5 business days of receiving cleared payment. DHL is our primary parcel carrier. We also ship item by Fedex.UPS,TNT and EMS. We will choose the reasonable shipping method to save shipping fee for every customer. Return policy: We will accept return in 14 days only if the item is defected or unused. You must contact us before any return. For item that is defected. You must provide us photos of the item first and return the item to us for replacement or refund. For item that is returned as"new/unused" We will charge 30% of re-stocking fee plus shipping and handling costs. If the items are free shipping. We will deduct our shipping cost from the original selling price when we process refund to you.
$
51,499
Buy It Now
$0 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
549.99
Buy It Now
$0 Shipping
Condition: New
Location: Toledo,OH,USA
$
3,295
Buy It Now
$0 Shipping
Condition: New
Location: Manitowoc,WI,USA
$
575
Buy It Now
Free Shipping
Condition: Used
Location: Watertown,CT,USA
$
49.5
Buy It Now
$8 Shipping
Condition: Used
Location: Kimberly,WI,USA
$
949
Buy It Now
Free Shipping
Condition: Used
Location: Clermont,GA,USA
$
600
Buy It Now
Free Shipping
Condition: Used
Location: Coffeyville,KS,USA
$
528
Buy It Now
$0 Shipping
Condition: Used
Location: Milford,OH,USA
$
19.19
Buy It Now
$0 Shipping
Condition: New
Location: Columbia,MO,USA
$
3,900
Buy It Now
Free Shipping
Condition: Used
Location: Howell,MI,USA
$
689.99
Buy It Now
$0 Shipping
Condition: New
Location: Columbus,OH,USA
We have had the great fortune in aquiring this truly quality Milwaukee drill motor BRAND NEW still in box. It is made to attach to the Milwaukee electromagnetic ... moredrill press for use in portable drilling. This is an extremely heavy duty drill and is the best there is. Included is a 3/4" capacity drill chuck. We are selling this at a very low price. Please check out our ebay site for more items of interest. This is also available for local pickup in Columbus. Ohio. It is available for overseas shipping as well. Accessories are available through us as well. This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4262-1 features an 11.5 amp motor with a 3/4-inch chuck. This unit has 350 RPM. Geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is too large. Features: 3/4-in capacity. 11.5 amp motor, 350 RPM, Dual mount gear case. Reverse mount for tight quarter drilling, Taps up to 1-in-14 threaded hole, Develops up to 1.670 pounds of drill point pressure with a 1-in steel plate,
$
789.99
Buy It Now
$0 Shipping
Condition: New
Location: Erie,MI,USA
$
3,949.99
Buy It Now
Free Shipping
Condition: Used
Location: Francis Creek,WI,USA
$
600
Buy It Now
Free Shipping
Condition: Used
Location: Salisbury,NC,USA
$
9,995
Buy It Now
$0 Shipping
Condition: New
Location: Cincinnati,OH,USA
$
4,599
Buy It Now
$189 Shipping
Condition: New
Location: Wayland,MI,USA
$
214.01
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
364.98
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
49
Buy It Now
$29 Shipping
Condition: Used
Location: Kimberly,WI,USA
$
364.97
Buy It Now
$0 Shipping
Condition: New
Location: Hebron,KY,USA
$
51,499
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
$
1.49
Buy It Now
$0 Shipping
Condition: New
Location: China
$
3,799
Buy It Now
$230 Shipping
Condition: New
Location: La Vergne,TN,USA
$
1,500
Buy It Now
$0 Shipping
Condition: Used
Location: Azusa,CA,USA
$
836.28
Buy It Now
$0 Shipping
Condition: New
Location: Minooka,IL,USA
$
47.95
Buy It Now
$0 Shipping
Condition: New
Location: La Center,WA,USA
1/32" 5/8" JT3 Taper Drill Chuck Description: For those that prefer traditional keyed drill chucks. These chucks offer precision and nearly ... moreunlimited mechanical advantage for tightening and loosening drill bits and tooling. These 1/32" 5/8" JT3 Taper drill chucks have knurled grips and the chuck key is included. Specifications: 1/32" 5/8" JT3 Knurled Grips Chuck Key Included SHIPS PRIORITY MAIL. SHIPS SAME DAY IF PAID FOR BY 4PM PST. THANKS. Payment: You may pay instantly with PayPal by clicking the pay now button at the top. Return Policy 100% Satisfaction Guaranteed 100% Money back Guaranteed All product exchanges must be in 100% brand new condition Please contact us within 7 days upon damaged item is received We will file claim for all buyers on damaged or lost items Exchange. Refund, or replacement will be offered upon buyers request Please contact us for more information by using"ask a question" link at the bottom of the listing Customer satisfaction is our primary goal and we will resolve any problems such as damaged. Not as described, missing parts, and lost items. Please contact us before leaving a negative or neutral feedback. Our office hours are Monday to Friday 8:00am-6pm PST. All emails will be replied within 24 hours except Sat. Sun. and US holidays. Thank you for visiting our store! Terms: Buyer assumes all risk of liability with respect to the purchase and use of the product/item. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary from those photographed Payment is expected within 7 days of auction close. We cannot guarantee availability of product if we do not receive payment within 7 days. Shipping: Free shipping to the all of USA unless otherwise stated. Shipping discounts for multiple items will be done on a case by case basis for international buyers. WE SHIP FASTER and SAFER THAN MOST SELLERS JUST CHECK OUT OUR FEEDBACK! We stock all available items. And we ship from our warehouse. Orders are shipped the sam
$
559.99
Buy It Now
$0 Shipping
Condition: New
Location: Toledo,OH,USA
$
2,250
Buy It Now
Free Shipping
Condition: Used
Location: USA
$
125
Buy It Now
$35.5 Shipping
Condition: Used
Location: Fair Haven,NJ,USA
$
450
Buy It Now
Free Shipping
Condition: Used
Location: Howell,MI,USA
$
225
Buy It Now
$55 Shipping
Condition: Used
Location: Bountiful,UT,USA
$
4,658.88
Buy It Now
$0 Shipping
Condition: New
Location: Buffalo Grove,IL,USA
 In 

Past Items  
 
Vintage Dunlap drill press vise with 2 removable jaw insert pieces/ opens to 3 inches size 2 3/8th by 8" works good/ threads are good Sell USA only
7" X 7" Cross Slide Milling Table with vise in very good condition. Will ship to U.S. only via USPS Priority Mail
Old School 1960s Craftsman Bench Top Hand Drill Press#335.25987 ~FREE SHIPPING Good condition. All functions operate normally. All original and no missing parts. Swivels 360 degrees around. Center Plate moves 360 degrees in any direction. Also moves Up& Down. Universal Mounting allows a number of different electric drills to work with this unit. Home or commercial use. 24" tall(adjustable) x 14" deep. Base is 8" square Powered by 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-1406b1330df-0xff-
Selling a Black and Decker industrial grade magnetic base drill press. Regular 115 volt power. Works well. Feel free to make us an offer. Thanks FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. PLEASE EMAIL OR CALL US FOR A SHIPPING QUOTE. SHIPPING TO A COMMERCIAL LOCATION IN THE CONTINENTAL US SHOULD BE BETWEEN 75-200 DOLLARS. BUT YOU MUST CONTACT US FOR AN EXACT PRICE. LOCAL PICK UP IS MORE THAN WELCOME, BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. WE CAN ALSO TAKE A CREDIT CARD OVER THE PHONE OR IN PERSON. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
5/8" 625 DIA. X 9" LG. REAMER IN GOOD CONDITION. I HAVE A TOTAL OF 3 OF THESE REAMERS IN SAME CONDITION, THEY ARE IN VERY USEABLE CONDITION AND SHOULD BE RESHARPPENED SOON. PRICE IS FOR ONE REAMER ON THIS SALE. CHECK MY OTHER ADS FOR MORE TOOLING& MORE TO BE LISTED YET. THANKS SALES& SHIPPING TO USA ONLY PAY IN FIRST 24 HRS. OF SALES END& I WILL SHIP NEXT DAY. THANKS
FOR SALE IS THIS VINTAGE DRILL CHUCK KEY LABELED"S#13" THIS CHUCK KEY IS IN GOOD TO EXCELLENT PHYSIAL CONDITION WITH SIGNS OF USE. ALL TEETH ARE IN PERFECT CONDITION AND CUT DIAMOND PATTERN ON KEY BASE IN GREAT SHAPE TOO. UNKNOWN MANUFATURER THIS ITEM CAME FROM THE BASEMENT AND IS AT LEAST 10-20 YEARS OLD, POSSIBLY OLDER. PLEASE REVIEW PICTURES TO ENSURE YOU ARE COMFORTABLE WITH THIS ITEM CONDITION AND COMPATIBILITY YOU WILL RECEIVE ONE(1) VINTAGE S#13 DRILL CHUCK KEY SHIPPED FAST AND FREE BY USPS FIRST CLASS MAIL. BID AND BUY HERE IN IN ABSOLUTE CONFIDENCE SINCE I HAVE THOUSANDS OF POSITIVE FEEDBACK AND TEN+ YEARS EBAY EXPERIENCE. I SHIP WITHIN TWO DAYS OF RECEIPT OF PAYMENT-OFTEN THE NEXT DAY. PAYMENT IS BY PAYPAL ONLY! FREE USPS FIRST CLASS"GREEN" SHIPPING USING RECYCLED PACKAGING MATERIALS AND ENVIRONMENTALLY FRIENDLY ... moreMATERIALS TO ANYWHERE USA. I DO NOT SHIP ANYWHERE ELSE. NO RETURN OR EXCHANGE ON THIS ITEM-SOLD AS IS. HAVE A GREAT DAY AND THANK YOU FOR STOPPING BY. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1406cbcea32-0x103-
by adding my eBay Store to your Favorites- see many ENGINEERING& MECHANICAL ITEMS along with OWNER'S MANUALS& INSTRUCTION BOOKS not always found in eBay's so-called"search" Here's a link to all of my currently available OWNER'S MANUALS& INSTRUCTION BOOKS: and a link to my other ENGINERRING& MECHANICAL-related items: +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++. THE DRILL PRESS: Over 100 Drill Press Operations Described and Illustrated A Craftsman Power Tool Handbook. Revised 1954. Sears Catalog# 9-2921. Over 200 Illustrations. Originally copyright 1952 by Sears. Roebuck& Co. so this is the 1954 revised edition. 32 pages + original stiff printed paper covers. Finished size is 6x9 inches. Very light workshop soiling& wear otherwise VG. No torn or loose pages. No missing ... morepages, no cut outs. Clean interior. the fine print. sigh] but please read: WE REGRET WE DON'T SHIP OUT OF USA; SORRY. BUT NO EXCEPTIONS. $3.25 shipping via cardboard& plastic-protected 1st class mail package. PAYPAL IS THE MUCH PREFERRED METHOD OF PAYMENT. Thanks! Please pay within 4 days. Delayed? Then email me- I'll try to work with you when necessary but it helps a lot when I have contact with you. If your payment is delayed. Ebay is liable to send a dun or two. PLEASE NOTE THAT THOSE ARE COMING AUTOMATICALLY FROM EBAY AND NOT FROM ME. I typically send out just one reminder. PLACING A BID IS THE ETHICAL EQUIVALENT OF ACCEPTING THESE TERMS. PLEASE DON'T ASK TO ALTER THEM AFTERWARDS. In return. As our feedback clearly shows, we'll get your item(s) to you, as described, in a safe, timely manner. Thanks! editorials: Want a"FIRST EDITION" of TO KILL A MOCKINGBIRD by Harper Lee? Then please do yourself a favor and click on the icon above under seller information and read how to protect yourself and your bank account from misleading or misinformed(and occasionally even deceitful) des
Basically and open box item. Unused. Plugged in and tested. Shipping via Fedex. UP, or USPS, if you have a preference, tell me. PayPal via PayPal due within 3 days.
This portable drill press is used for cutting holes in steel. Aluminum, wood, plastics and more. A great tool to own. Pick up only. Posted with
Vintage Cole Bench Drill Press. I've heard these called a"poor man's drill press" And I guess that's what it is. This one works fine. I've used it a few times and I can vouch for it. It's an interesting and still usable retro tool. Thanks for looking.
Up For Auction Is A Jancy Magnetic Slugger Drill. This Drill Is In Pretty Good Shape. It Works Great. Im Not 100% Sure Of The Model Of This Drill I Think Its A Slugger USA5 But Cant Promise It. The Label Is Worn And Cant See It. This Drill Does Work Great. It Is Missing One Of The 3 Handles(See Pics) Other Than That Its Complete. Bid With Confidence.
Vintage Delta Rockwell Milwaukee Drill Press Pulley Cover Belt Guard. As is. It will need a wipe down& is ready for mounting. It came from a 15" DP. You will have to check to see if it mounts to other units. Thanks for taking the time to review my auction.
This drill press still works well. Wooden jig shown in picture is included. Local pickup only in Bensenville. Illinois, which is only 15 miles west of Chicago. Posted with
Jacobs Chuck 1/8-5/8" 16 on#4 morse taper W/chuck key. For Drill press lathe mill. Good condition.3b]
Jacobs Chuck 0-1/2" 14N on#3 morse taper W/chuck key. For Drill press lathe mill. Good condition.3b] 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14073cc3ce6-0x100-
used 10" safety vise Float-Lock USA Standard 10" jaw opening with built in parallels and V block only 1 handle please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
4 Drill Press C Clamps 3" Vise Jorgensen Model 1623 Made in USA. Pre-owner some surface rust all work as should. Assembled Depth(in. 5.75 in Assembled Height(in. 6 in Assembled Width(in. 2.5 in Clamping strength(lb. 2000 Color Family Orange Hand Tool Type Clamp Material Steel Product Depth(in. 5.75 in Product Height(in. 6 in Product Weight(lb. 2.25 Product Width(in. 2.5 in
I will be listing an awesome 1946 DELTA MILWAUKEE ROCKWELL Floor Model Drill Press this evening as well as a nice variety of ACCESSORIES including SPINDLES. CHUCKS. PULLEYS. MORTISING ATTACHMENTS. And more so please see all of my Listings. I do offer combijned shipping! For your bidding consideration in this auction is the following Torque Tool or accessory: LOT# 7 ITEM: Delta Milwaukee Drill Press DP220 14" Spindle WITH A Keyless Chuck Attachment on it. DESCRIPTION: This item was found in a Box marked"Delta DP220 Drill Press Accessories" and is being sold as such. And as-is, so please view photos and ask questions. MEASUREMENTS: The spindle is 5/8" diameter and it measures 17" long overall. The Chuck measures 2" in diameter and 3 3/4" long. CONDITION: Used but in very nice cosmetic and working condition. ... morePlease note. I closed the chuck for the photo but have not been able to re-open it. I am not familiar with this vintage Chuck so if anyone knows the key to re-opening it please let me know and I will report the results. SELLERS TRADE PRACTICES: I want your Bidding and Purchasing experience with me to be a satisfactor y one in every way. I have provided a few thoughts below to help you understand my practices and what has proven to work successfully for me and over 5000 of my customers in ensuring an above satisfactory transaction here on Ebay. Please let me know if you have any questions or comments! FEEDBACK: I gladly provide POSTIVE FEEDBACK once our transaction has been completed to your satisfaction and I have recieved your Positive Feedback. PAYMENT: I accept Paypal payment and you should pay for your items within 4 days of the Auction close. I use Ebay's system for payment reminder and notification. LISTING/ ITEM DESCRIPTION: Please ask questions- I try and describe items as best I can. And add corresponding Photos, but I don't always know what may be important to you. RETURN POLICY: I accept returns for full refund within 7 days of the auction close date if your
DEWALT DW 151 Magnetic Drill Press 1320-98 Gear Motor This item is in good working condition and will come with all shown in the pictures NO RESERVE! We Accept Visa Mastercard and Discover as Major Credit Cards This Package Will Be Shipped Upon Payment. And Yes. We Do Combine Shipping On Combined And Multiple Purchases. Please Let Us Know If You Are Bidding On Any Of Our Other Items And Need Us To Wait To Send You A Final Invoice. Communication Is KEY! Check out many other Great items available in our Auction's& Buy It Now's in our store. We Offer A 100% Satisfaction Guarantee With Every Item We Sell! Don't Forget To Add Us To Your Favorite's List! If You Have Any Questions Feel Free To Ask! Thank You For Looking From TRADER MAGEE'S! In An Effort To Keep Your Items Safe. Secure, Insured and Arriving In A Timely Manner. ... moreThe Cost Of Shipping Is Provided To Help You Make A Well Informed Decision To Base Your Bidding On. Our Auction Items Are Always At Very Low Starting Bids To Give You The Best Deals. International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. Do not confuse them for additional shipping charges We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. ANY RETURNS OR CANCELLATIONS WILL INCUR A RESTOCKING FEE OF 20% OF THE ITEM PRICE Powered by
The previous owner passed away. Only used for 1 known home project. Very good condition. Posted with
aims BURGMASTER#2A AUTO INDEXING TURRET DRILL PRESS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Burgmaster Corp. This is a used Auto Indexing Turret Drilling. Tapping, and Boring Press in GREAT condition. Model# 2A Serial# 2351 Features: 6-position Indexing Turret. Six Individual Adjustable Depth Stops. Coolant System. Equipped with Jacobs Drill Chucks& a Burgmaster Tapper. Specifications: Table: Table Surface Area: 33-1/4" x 17" w/ 1-1/4" trough Overall Table Size: 36-1/2" x 20-1/4" Capacities: Throat: 12" Swing: 24" Drilling/ Tapping Capacity: 3/4" Spindle: Spindle Turret Travel: 8" Maximum Distance From Spindle to Table: 24" Spindle Motor: 2/ 1 Horsepower. 440 Volt, 2.9/ 1.5 Amps, 900/ 1,800 rpm, 60 Hz. ... moreSpindle Speeds: Spindle#1& 4: 500/ 1.000/ 1,500/ 3,000 rpm Spindle#2& 5: 350/ 700/ 1.000/ 2,000 rpm Spindle#3& 6: 225/ 450/ 650/ 1.300 rpm. General: Electrical: 220 Volt. Three Phase Overall Dimensions: 36" x 49" x 77" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. BURGMASTER#2A AUTO INDEXING TURRET DRILL PRESS BURGMASTER#2A AUTO INDEXING TURRET DRILL PRESS BURGMASTER#2A AUTO INDEXING TURRET DRILL PRESS BURGMASTER#2A AUTO INDEXING TURRET DRILL PRESS BURGMASTER#2A AUTO INDEXING TURRET DRILL PRESS BURGMASTER#2A AUTO INDEXING TURRET DRILL PRESS BURGMASTER#2A AUTO INDEXING TURRET DRILL PRESS BURGMASTER#2A AUTO INDEXING TURRET DRILL PRESS BURGMASTER#2A AUTO INDEXING TURRET DRILL PRESS BURGMASTER#2A AUTO INDEXING TURRET DRILL PRESS Reliable Tool Inc. c 2011 | Powered by
good used 2 MT shank drill chuck Jacobs USA No. 2A 0- 3/8" capacity with key will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
CHECK ALL PHOTOS& READ DESCRIPTION PRIOR TO BUYING. FEEL FREE TO ASK QUESTIONS- ORIGINAL DUMORE HI SPEED SENSITIVE DRILL PRESS; MACHINIST/ JEWELER/ WATCHMAKER TOOL. BRAND: DUMORE. MADE IN RACINE, WISCONSIN, USA. MODEL: No. 16-011. FEATURES TABLE LIFT/DRILL PAD MOTOR: 115 VOLTS. 1.0 AMPS, 1/16 H.P. 17,000 RPM(NO LOAD) CHUCK MODEL: JACOBS No. 0. CAPACITY: 0- 5/32" KEY INCLUDED) NOTE: DRILL PAD HAS SOME MINOR/SMALL DRILL HOLES/MARKS. SOME SURFACE RUST THROUGHOUT. SOME ELECTRICAL TAPE ON CORD. ALL ITEMS ARE USED. ITEM HAS BEEN TESTED& WORKS. SPINS TRUE. PLEASE LOOK AT ALL PHOTOS FOR MORE DETAILS AND CONDITIONING. SHIPPING OPTIONS: UPS GROUND SHIPPING: CONTIGUOUS 48 STATES ONLY. NO P.O. BOXES, NO ALASKA, HAWAII, P.R. NO INTERNATIONAL OR CANADA SHIPPING)
Mill Milling Drill Drilling Press Machine Head ADAPTOR& 6-HOLE TOOLHOLDER ATTACHMENT Quantity: 2-piece set Material: Aluminum Drilling Machine Adaptor and 6-Hole Toolholder PAYMENT: Paypal payment is due immediately for“Buy-it-now” listings and within 2 days for auction listings. If payment is not received within the specified time. We reserve the right sell the item to a different buyer. If SHIPPING is offered and price is quoted above: Shipping Address: According to Ebay/Paypal policies. We are required to ship ONLY to the address in either your Ebay(default shipping address) or Paypal account. The request for shipping to a different address cannot be honored as it disallowed according to Ebay/Paypal policies. International Shipping: Import duties. Taxes, and surcharges are already included as quoted when shipped through the Global ... moreShipping Program. If the item is not shipped through the Global Shipping Program. Then duties, taxes, and surcharges are not included in the item price or shipping charges, and they are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be if you are concerned. If LOCAL PICK-UP is offered and stated above: The buyer is responsible for arranging the item pickup within a week of the item selling date. The buyer can pickup the item himself/herself or make arrangements for his/her representative and/or shipping service to pick up item. As it is considered one of the same. This item has been tested and in good working condition. Nevertheless, the item must be inspected and tested as needed by the buyer or buyer’s representative for final approval prior to actual pickup. ABOUT US: We are not affiliated with the brand names being sold. And brands mentioned are for identification purposes only. TERMS OF SALE: Items for sale are in working condition unless otherwise specified. The item(s) in the photos are the actual item(s) for sale. And it is exactly what you will receive. Only the item(s) shown in the photos a
aims CHICAGO 13" MULTIPLE SPEED BENCHTOP DRILL PRESS- DP-558-2 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Chicago Industrial. This is a used Heavy Duty Multiple Speed Benchtop Drill Press in working condition. Model# DP-558-2 Serial# 88131 Specifications: Tables: Base Table Size: 8-1/4" x 8-1/4" Spindle: Throat: 6-1/2" Swing: 13" Quill Depth: 3-1/4" Taper: 2 Morse Taper Number of Speeds: 5 Spindle Speeds: 400- 800- 1.200- 1,800- 2,800 rpm. Column: Column Diameter: 3-1/8" Column Height: 23" General: Motor: 1/4 Horsepower. 115 Volt, 1,725 rpm, 5.2 Amps, 60 Hz Electrical: 115 Volt. Single Phase Overall Dimensions: 12" x 21" x 38" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give ... moreus a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CHICAGO 13" MULTIPLE SPEED BENCHTOP DRILL PRESS- DP-558-2 CHICAGO 13" MULTIPLE SPEED BENCHTOP DRILL PRESS- DP-558-2 CHICAGO 13" MULTIPLE SPEED BENCHTOP DRILL PRESS- DP-558-2 CHICAGO 13" MULTIPLE SPEED BENCHTOP DRILL PRESS- DP-558-2 CHICAGO 13" MULTIPLE SPEED BENCHTOP DRILL PRESS- DP-558-2 CHICAGO 13" MULTIPLE SPEED BENCHTOP DRILL PRESS- DP-558-2 Reliable Tool Inc. c 2011 | Powered by
Gold International Machinery Corporation | Solberga 20" Swing Geared Head Floor Model Drill Press. Model SE 142, S/N: 4653 Our Inventory Number: 0379-410 Technical Specifications: 230V/3PH/60HZ, Drill to center of circle: 20" Column diameter: 3-1/2" Spindle taper: 3 MT, Spindle speeds: 120- 1548 RPM, Head travel on column: 6" Table travel on column: 21" Overall table size: 22" L-R x 18" F-B, Work surface of table: 18.5" x 14.5" Motor: 1.5/1.1 HP. 2) speeds, Estimated weight: 400 lbs. Equipped With: Ratchet mechanism for raising and lowering head and table, Reversing control of spindle, 0- 1/2" capacity drill chuck, This item is in very good condition! We can palletize. Cover and load this item for an additional $125. We will load your truck for free from our adjustable loading dock(not crated) ... moreThank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us bef
Welcome. Bidders! Up For Sale We Have An- Errington Auto Reverse Tapping Chuck Head For Use With A Drill Press READ THE DESCRIPTION CAREFULLY The photos below show the ACTUAL ITEM you are bidding on. Please click on the photo to see High Resolution photos which will open in a new window. When the new window opens. Click on its photo to have it go to FULL size. If you have any questions. Please Ask! Yet another one of my father's tools that I never found a use for; It has been sitting unused in my tool cabinet since the early 1980s. It mounts in your drill press chuck and allow you to tap many holes quickly. On the way down. It spins your tap in the same direction the drill press turns. As you raise it up. It slips into neutral, and then into reverse to back the tap out of the hole. It appears to be in good working condition. After all ... morethese years. Its steel body has been colored from decades of use and handling. But as near as I can tell. It seems to be functioning correctly. There should be a bar of some sort that attaches to the body of the unit to hold it still as the top and bottom shafts turn. But I have not found it. If I do find it. I'll revise the auction to include it. The input shaft is.5 inch diameter and the hole in the chuck. Where the tap goes. Has a diameter of.33 inch. I'm happy to answer any questions you may have. And provide additional photos if necessary. Shipping Weight Will Be Between 5- 6 Pounds I SHIP TO ALL 50 UNITED STATES Item will ship via USPS Priority Mail and will be Carefully packed for Maximum Protection. INTERNATIONAL SHIPPING USPS Priority Mail. COMBINED SHIPPING I am happy to pack multiple items in the same box to save you money. Just email me to let me know you will be making multiple purchases and I'll hold the shipment. Then make your other purchases as you normally would. After everything is packed and I know what the total shipping cost will be. I'll send a refund of the overcharge through Paypal. I will pack it for YOU as if I were packing it for ME! T
Tapping head by jacobs. Comes with 3 different size flex collets and the handle. See pics of what you will receive. Has straight shank that could be changed out if you wanted to once you got it. Posted with
PREVIOUSLY OWNED. USED, BUX, O. S. WALKER MAGNETIC BASE DRILL PRESS STAND DH-1/2. SN = SBS41232. THESE LITTLE BASES ARE GREAT FOR TIGHT SPOTS. HARD TO FIND THESE. ALMOST ANY SCREW MOUNTED DRILL MOTOR WILL MOUNT TO THIS. 110 VOLTS. 50 WATTS. ON/OFF SWITCH. INDICATOR LIGHT. ALUM SLIDE WITH BRONVE GIBS. RACK AND PINION UP DOWN MECHANISIM. 3 BAR HANDLE FOR FEEDING UP OR DOWN. INCLUDES SPECIAL RIGHT ANGLE PLUG FOR THR DRILL MOTOR TO PLUG INTO. NOT TESTED. PICTURES ARE ACTUAL. NOTE: SHIPPING IS NOT INCLUDED. MAGNETIC BASE DRILL STANDS ALWAYS REQUIRE A SAFETY CHAIN WHEN IN USE(NOT INCLUDED) PICK-UP IS FREE. THIS ITEM IS SOLD AS IS. NO REFUNDS. NO RETURNS OR EXCHANGES. YOU MAY ARRANGE SHIPPING THRU FREIGHTQUOTE.COM IF YOU WISH. THANKS FOR LOOKING. NOTE: ITEM HAS NOT BEEN TESTED OR CHECKED FOR FUNCTION. CONDITION IS UNKNOWN, WE DO NOT HAVE THE ABILITY ... moreTO CHECK THE ITEM. THIS ITEM IS SOLD AS IS CONDITION. NO EXCHANGES. RETURNS OR REFUNDS ARE ALLOWED. ITEM IS BEING SOLD AS PICTURED. BEFORE YOU PURCHASE. PLEASE READ THE CONDITIONS OF SALE BELOW. TERMS AND CONDITIONS OF SALE: ACCEPTANCE OF TERMS AND CONDITIONS OF SALE: BUY SUBMITTING A BID OR BUYING AN ITEM. THE BUYER AGREES THAT THEY HAVE READ, FULLY UNDERSTAND AND ACCEPT ALL TERMS AND CONDITIONS. IMPORTANT: PREVIOUSLY OWNED OR USED GOODS ARE SOLD"AS IS" WHERE IS" PREVIOUSLY OWNED GOODS USUALLY HAVE IMPERFECTIONS. NO GUARANTEE OR WARRANTY EXPRESSED OR IMPLIED. NO REFUNDS, NO RETURNS, NO EXCHANGES. ALL MERCHANDISE IS AVAILABLE FOR BUYER INSPECTION BEFORE PURCHASE. GLASS AND CHINA ITEMS USUALLY HAVE IMPERFECTIONS WHEN MANUFACTURED. DESCRIPTION INFORMATION ON THIS ITEM: THE INFORMATION AND PICTURES ARE BELIEVED TO BE ACCURATE TO THE BEST OF OUR KNOWLEDGE. PICTURES SHOW THE VISUAL CONDITION OF THE GOODS. SOMETIMES PICTURES ARE FROM CATALOGS. HOWEVER WE DO NOT GUARANTEE ACCURACY OF INFORMATION AND CANNOT BE RESPONSIBLE FOR ANY ERRORS OR OMISSIONS. AN INSPECTION SHOULD BE MADE. PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE. IT IS THE BUYERS RESPONSIBILITY TO ASK ANY Q
Gilbraltar 6" Industrial Drill press Vise Brand, Gibraltar, Type, Industrial Drill Press Vise, Jaw Opening(Inch) 6, Throat Depth(Inch) 2, Jaw Width(Inch) 6, Height(Inch) 3-1/2, Overall Length(Inch) 11-15/16, MSRP: $125.99. You are buying ONE Gilbraltar 6" Industrial Drill press Vise. Item is used surplus with chipped base. Be sure to view pictures as they show EXACTLY what you’ll be receiving. Shipping Weight: 25lbs. Shipping: UPS Ground. Greg/ 04.01.13/ p.27.d/ 846 inkFrog Analytics.
Industrial ROCKWELL model 15-665 VARIABLE SPEED controlled BENCH TOP 15" 115/230 volt(presently wired for 115volt) 1725 rpm 3/4HP motor Very good condition for it's age(probably 1970's) was used only in a high school tech program. Will stretch wrap and place on skid for shipping. For no additional charge. Will deliver locally(15 milesof 06111) for free.
Machine Mounting Base 10" Square for 1" Diameter Shafts This very heavy. About 43.8 lb. steel, cast iron or a combination of both base is about 10"s square. Extending from the square are"ears" on both sides that are formed to accommodate a 1" shaft and are about 12" center to center. The plate has a grid on it but it is not set up in inches. It looks like it may have been designed for a press or maybe even a drill press. PAYMENT Payment is due immediately for all“ Buy it Now” sales and within 4 days of the end of all on- line auctions. The eBay Office Assistant has been set to automatically open an“Unpaid Item” case 4 days after the end of the auction if payment has not been received. If there is any reason you cannot comply with the above terms. Such as a cash transaction for a local pick up or an unanticipated ... morepayment delay, please contact us ASAP and make us aware of your situation. SHIPPING Domestic shipping charge is $12.95. This charge covers both the shipping cost as well as the cost of packaging and materials. The package will ship USPS Priority Mail. USPS Parcel Post. Fed Ex Ground or UPS Ground within 2 business days of receipt of payment. We are happy to offer Consolidated Shipping rates whenever possible. Please contact us and let us know which items you are interested in and what you Zip Code is so we can provide you with the reduced cost and arrange invoicing for the purchase. We welcome International buyers for all items that do not present shipping or customs challenges. We understand that International shipping costs are high and do not add any additional handling charges to International orders. International buyers please review calculated shipping costs prior to ordering. RETURNS We do our best to provide eBay buyers accurate descriptions and photographs and encourage you to ask questions prior to bidding on or purchasing an item. If you are not satisfied with your item after receiving it please contact us immediately with your concerns. We will accept return
Hamilton Varimatic sensitive drill press& tapping machine Variable speed Fully working in great condition! H 30"L 22" W 11" 880 to 9350 rpm maximum work height: 9" table size: 10 x 6 weight: 150 lbs Please feel free to call me with any questions at: Phone: 505-880-1540 Thanks John Purchasing Information: The machine is located in Albuquerque NM There is no charge to load onto buyer’s truck Cleared funds are required prior to shipment Payment methods include VISA/Master Card. Wire transfer, certified check and paypal Posted with
joe calcite DELTA ROCKWELL RETIREMENT LIGHT This offering is for the classic Delta RETIREMENT LIGHT. Its the light that makes a vintage tool restoration complete. Its shade/ housing is cast aluminum. Two pivot sections are attached. This one has a vintage/ period light socket. The wiring was unsafe and removed. Allowing the new owner to wire it as it suits him/her. The metal is all in good condition and clean. But does show minor marks from use. If any further assistance is needed just drop me a note with any questions you may have and I will respond ASAP. We like you to be able to bid with confidence. So we offer a return policy on all of our merchandise. If the item you purchase is not as described and or pictured simply notify us and return the item within fourteen days of receipt and we will refund the purchase price. Our guarantee is ... morenot however, intended to cover buyer remorse, so please read the description and examine the ample photo's we provide prior to placing your bid. If additional photo's are needed please ask. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.Shipping charges for overseas buyers will be determined after the conclusion of the auction and will depend upon how the buyer wants the item shipped plus insurance fees involved. Out of country buyers must pay by Paypal. GOOD LUCK* THANK YOU!
Servo 7000 Precision Drill Press Working Condition: Tested to power on only. No belt for futher testing. NO GUARANTEE ON WORKING CONDITION- Cosmetic Condition: is fair. There are many marks/scratches from use and missing top cover and belt. Front dial is taped fast. ONLY ITEMS PICTURED ARE INCLUDED SOLD AS IS AS PICTURED Buyer must be willing to use for parts if necessary. PAYPAL: We only accept PayPal payments from U.S. verified accounts with confirmed addresses. NO EXCEPTIONS• P.O. BOXES: FedEx and our trucking companies WILL NOT deliver to PO Boxes. The shipping price shown in the auction is for FedEx shipments to a physical address. If your“confirmed” PayPal address is a PO Box. You will need to contact us for a shipping quote VIA USPS delivery. NON PAYING BIDDER: As per eBay guidelines. If an item is not paid for within four days after ... moreend of auction an unpaid item case will be opened. You have 4 days after that to send payment. These items are sensitive electronic components. We use the utmost care during packaging. TRUCK FREIGHT: We use truck freight for any item over 80lbs. If shipping is not specified you must contact us for a shipping quote before bidding. PICK UP FEES: We welcome scheduled pick ups at our location; there is a $7 fee per auction. Cash ONLY• You have 10 days from the end of the auction to pickup an item. Items remaining in our possession after 10 days will be assessed a warehousing fee of $2.00 per day. Whether or not the item is paid for. DAMAGE CLAIMS: Damage to merchandise during shipping MUST be reported to us immediately upon discovery. ALL ORIGINAL PACKAGING MATERIALS MUST BE SAVED and submitted at time of pickup or inspection. We require a signature as proof of delivery on all FedEx shipments. If you are NOT going to be available to sign for the parcel. It will be your responsibility to arrange receipt of the item. Any item returned to us as“non-deliverable” Will require additional money for re-shipment. We do NOT ship on buyers accounts. PLEASE NOTE: We
Nice swivel and tilt.CA tax for CA res Posted with 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-140860d24e1-0x102-
Offering a triple feed handle for a 15" Clausing drill press Fits 1-1/4" shaft Any questions: Or call 724 882 6449 I have many parts for drill presses. Delta, Clausing, Walker Turner Happy to combine shipping on multiple purchases
INDUSTRIAL-PARTS-R-US Next Day Shipping Available for orders placed before 3:30 P.M. EST. Search: Search Mouse over images to see enlarged version Sugino Machine Selfeeder Electric Automatic Drill Press 100mm Stroke 1304ASE Click to see supersized image This is a USED Sugino Machine Limited Selfeeder Electric Automatic Drill Press With Superoll Burnishing Tool Head. Brand: Sugino Machine Limited Type: Automatic Drill Press Voltage: 200 Vac 3 Phase Drill RPM: 550 Amperage: 2.4/ 2.2 Actuation: Pneumatic Stroke Length: 100mm Superoll Burnishing Tool Head Why Buy From Us? Important Policies Domestic Shipping Payment& Checkout 30 Day Money Back Guarantee Contact Us Why Buy From Us? We post our items to over 50 countries. Firstly. We promise fast shipping along with professional and secure packaging. But most importantly you can be assured ... moreof old fashioned customer service. You can expect our service to be friendly and professional. You can also be assured that the service will continue after you receive you purchase. Our goal is for you to return to our store or recommend us. So we wish for you to only to have a positive experience. We have 100% POSITIVE FEEDBACK and we will not be satisfied if ONE customer is unhappy! Don't miss out on your chance to SAVE while buying from a trusted seller–bid now. Important eBay Policies. Same or Next-Business-Day Shipping(holidays excluded) Serious bidders only! Notices will be filed against non-paying bidders. 60-Day-Warranty on all electrical items(unless otherwise specified within the auction details) Full Purchase Price Refund or if available Item Exchange. see Terms& Conditions) Buyers are responsible for return shipping and a 15% Restocking Fee on all Non-Defective items. Order Processing Times. We ship items Monday through Friday. We do not ship on weekends or holidays. Standard Order Processing time: 1 Bu 1 Business Day for USPS. UPS, FedEx, and DHL Shipments. 2 Bu 2 Business Day Handling time is needed for Freight Shipments. In some cases Flatbed Shipments
This allows for lifting the tabl and lowering/raising the head on a Delta Milwaukee 13" drill press or any press with a 2 3/4" diameter column. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14088b211d9-0x103-
Description Vintage Record 412 drill press vice. Made in England. Jaws measure 2 ¼" 5.7cm) wide and open to a maximum of 1 ½" 4cm) Tool is in good working order. Payment- PayPal- International payments by PayPal only please) Postal Order- Personal Cheque- Cash on Collection- Items paid for by personal cheque/ Echeque will be shipped on receiving full payment. Shipping I do combine orders to reduce shipping costs. Please request the total amount once all purchases have been made. A revised invoice will be provided as soon as possible. International shipping costs for large or heavy items are quoted on an individual basis. Please ask for a quote before bidding. Please note that items posted by courier may incur a remote location surcharge. Remote is defined as islands and highlands or a post code that is difficult to serve. ... moreTerms of Sale If the item doesn't live up to your expectations it can be returned within 14 days. To avoid the postage cost to return the item please look at the super- sized images provided to better judge an items condition. If you're not 100% satisfied please contact me before issuing any negative feedback or low seller ratings. I will try to resolve any issues you might have. Contact Us For more information or any questions you might have please don't hesitate to contact me. By Email the-tool-emporium@virginmedia.com By Telephone Nottingham- 01158 776410
Preowned 15" ROCKWELL Drill Press. Model: 15-069, S/N 1721327 Capacity. Cast iron steel Drill to center of circle Distance spindle to column Spindle taper Spindle travel Spindle diameter(4) Spindle speeds. Step pulley Table size Base. T-slotted 1/2" 3/8" 15" 7-1/2" Jarno#33 for 1/2" capacity drill chucks 4-7/16" 2" 680. 1,250, 2,400, 4,600 R.P.M. 10" L-R x 10-1/2" F-B 13-1/2" L-R x 11" F-B Equipped With: Adjustable height work table T-slotted base(1) 5/64"1/2" Capacity MULTI-CRAFT key-type drill chuck 1/2 H.P. 1/60/115 volt 1.725 R.P.M. spindle motor with electrical controls Machine is wired for single phase operation. Approximate Weight: 168 Lbs. Approximate Dimensions: 16" L-R x 26" F-B x 62" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
BURGMASTER 6 SPINDLE TURRET DRILL TAP PRESS MODEL 1D TAPPING HEAD SERIAL NO IP1122 6" STROKE TABLE 17" x 12" 9" THROAT SPINDLE SPEEDS 275-4010 RPM 1 HP 208-380/440 2.9/2.8 A 50/60 HZ 3450 RPM 3 PHASE MEASURES: 44" x 36" x 74" LOADING FEE $30 PLEASE EMAIL FOR LOCAL PICK UP TIMES AND FREIGHT CHARGES. BUYER IS TO UNDERSTAND OUR TERMS AND CONDITIONS PRIOR TO PURCHASE
HI UP FOR SALE IS A AVIATION DRILL BLOCK WITH CHIP RELIEF CUT INTO THE BOTTOM OF THE BLOCK. USED FOR DRILLING AND MAINTAINING A 90 DEGREE HOLE FOR A# 21 AND 5/32 DRILL OR REAMER. THE BLOCK IS 1.200 INCHS LONG AND 3/4 WIDE AND IS 3/4 INCH TALL.E-MAIL ME YOUR BEST OFFER ANY QUESTIONS OR CONCERNS FEEL FREE TO E-MAIL ME THANKS.
CLAUSING DRILL PRESS PART 15" Series- USA Machine Base- 3" Column is not included in this sale; but is available for sale! All parts came off of a working drill press and are in good shape. please refer to the pictures to see the nice quality of these parts. I have all the parts from this drill press available; so please check my store or send a message inquiring. 732-642-8271 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-140950b2590-0x106-
DELTA ROCKWELL DRILL PRESS PART 15" Series- USA Machine Column Collar- 2 3/4" sale is for on individual collar) All parts came off of a working drill press and are in good shape. please refer to the pictures to see the nice quality of these parts. I have all the parts from this drill press available; so please check my store or send a message inquiring. 732-642-8271 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-140950b25bc-0x10b-
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 20" Swg 1.5HP Spdl Clausing 2277 Variable Speed DRILL PRESS. Vari-Speed,3MT,T-S 20" CLAUSING VARIABLE SPEED DRILL PRESS. MODEL: 2277. S/N: 523693, NEW: 1990'S SPECIFICATIONS: CAPACITY. HAND ... moreFEED. 1-1/4" DIA DRILLS TO CENTER OF CIRCLE. 20" DIAMETER OVERALL SIZE OF TABLE. 19-1/2" X 22" WORKING SURFACE OF TABLE. 15-1/2" X 18" SPINDLE TAPER. 3 MORSE SPINDLE TRAVEL. 6-1/2" MAX DISTANCE SPINDLE TO TABLE. 33-1/8" MAX DISTANCE SPINDLE TO BASE. 43-3/8" BASE WORKING SURFACE. 13" X 15-1/2" SPINDLE SPEEDS INFINITELY VARIABLE: LOW RANGE. 150- 1000 RPM HIGH RANGE. 300- 2000 RPM APPPROXIMATE WEIGHT. 640 LBS. EQUIPPED WITH: MANUALLY OPERATED RATCHET-TYPE MECHANISM FOR RAISING/LOWERING OF TABLE* T-SLOTTED TABLE& BASE* SPINDLE REVERSE SWITCH* JACOBS DRILL CHUCK* 1.5/ 75 HORSE POWER 460 VOLT TWO SPEED MOTOR& CONTROLS INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE CONDITION: SUPERB* Click Here For More Clausing Machines Click Here For More Drills. Tappers& Jig Borers- SINGLE SPINDLE DRILL PRESSES(s) Questions about this Machine? Call David at(800) 873-6224 ext 7570 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This
Drill press 1/2 mortice adapter 1 3/4 quill size Used. Needs sharpening ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-1409aef49f8-0xff-
THis is for 1 Dumore High Speed Sensitive Drill Press. Jewelers Watchmakers Drill Press. 17000 RPM 115v 1.0 amp Made in USA Model 16-011 Used Feel free to make offer. Email with any questions you may have. Shipping price includes shipping and handling. Posted with
CLAUSING VARIABLE SPEED DRILL PRESS M/N 2274 UNIT IS GOVERNMENT SURPLUS AND DOES HAVE SOME DENTS AND SURFACE RUST AS SHOWN IN PICS. UNABLE TO TEST SO AS ALL OF OUR AUCTIONS IT IS BEING SOLD AS IS AND ALL SALES ARE FINAL. BUYER IS RESPONSIBLE FOR ARRANGING FREIGHT AND PROVIDING US WITH PICKUP DATE AND A COPY OF BILL OF LADING FOR PICK UP. FORKLIFT IS AVAILABLE FOR LOAD OUT AND LOCAL PICK UP IS AVAILABLE. BEING SHIPPED FROM 78108 TOTAL WEIGHT IS 600LBS. PALLET DIMENSIONS 48"X48"48" Disclaimer- ALL ITEMS NEW OR USED ARE SOLD AS IS AND ALL SALES ARE FINAL. QUESTIONS? PLEASE CALL 210-566-3300 or text us at 210-273-3394
Vintage" PALMGREN" MACHINIST- DUAL CROSS SLIDE TABLE Mill- Work Holding Tool Price Includes Shipping! We have for your consideration a Vintage"PALMGREN" MACHINIST- DUAL CROSS SLIDE TABLE- Drill Press/ Work Holding Vise in average overall working condition. I do not see any obvious cracks/ breaks or repairs. The crank adjustments turn freely and the table slides smoothly. Table travels- 8" x 5" Casting number on bottom reads- 6285-1-A. P le ase refer to the pictures for measurements. Table measures 6" x 10" the 4 bolt holes on the top are 1/4" course and the vise weighs right at 35-1/2 lbs! What can we say- please take a good look at all(12) pictures. You are seeing this sliding work holding table just like we got it- will need some cleaning. The sliding work holding table is used and in average ... moreoverall vintage working condition. The table shows wear- scratches/ scuffs/ marks/ hammer strikes/ grease residue and drilling marks- see pics) w e only mention this for accuracy as it does not detract from the usefulness of the work table. Normal 0 false false false EN-US X-NONE X-NONE Just a reminder: what you see is what you will be getting- and once more- Price Includes Shipping! Please note: vise may be partially dis-assembled for shipping- easily re-assembled. Please look at the pictures carefully and do not hesitate to ask questions before bidding. Thanks for doing business with us! Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 OK. Time for the LARGE Fine Print: In the interest of making this a very pleasant experience for everyone. We would respectfully ask that all potential bidders read the below statements. 1) We respectfully ask that all winning bidders pay for their purchase using Paypal within 3 days of the auctions ending or immediately if a“buy-it-now” item is purchased. 2) Winning bidders live in the United States and your item purchased will be shipped to the same address you listed for Paypal. 3) We ONLY ship within the lower 48 conti
American Radial Drill Press 8" Column 36" Arm 48" Column travel 3hp 3phase motor new coolant pump All gears and speeds work Clutch needs adjustment Weight approx. 5000lbs. Overall Dim. 88"x48"x84" 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-140a5775f8e-0x100-
1950"THE DRILL PRESS A Craftsman Power Tool Handbook" Sears Roebuck Colorful This is a colorful orange booklet/manual by Craftsman entitled"The Drill Press" is has many drill press operations described and illustrated; overall is 32 pages in length and printed 1950 by Sears Roebuck and Co. Very nice condition High bidder adds $3.50 USA shipping. Our EBAY policy is to ensure Customer Satisfaction and our EBAY feedback speaks for itself. Please ask questions in advance of bidding when needed. If you have a problem we urge you to contact us ASAP to assess what course of action can be taken; this is a much more reasonable approach rather than filing a case with EBAY without any advance communication with the seller. EBAY guidelines indicate"We always encourage our members to communicate with each other when there's ... morea problem with a transaction. If you've already attempted to contact the member but were unable to resolve the problem. You can open a case" We take pride in satisfying you. Payment is to be received within a few days of end of auction. Returns will be honored, in reasonable situations. Refund would be generally be made to buyer for high bid amount only. It is not our intent to accept returns for reasons such as making an error in bidding, not paying attention to description of an item, or making up a reason to return the item. We do our best to ship to you as quickly and economically as possible. We can validate that an item has been shipped and recieved via domestic tracking information. On international shipments, we can validate that the item was shipped and recieved by the postal service, but will not be responsible for an item lost in your country's customs handling. Ebay is now promoting that sellers should provide tracking information on shipments. This may cause a small increase in the shipping cost of some inexpensive, small and lightweight items. In addition, the USPS has rather significantly increased the cost of international packages. We'll try to
This came from an estate sale. It appears to be in excellent condition with no broken pieces. It stands roughly 16 1/2" tall.
Vintage Atlas drill press model 63. Comes with 13 drill bits. 3 augers, 3 concrete bits 3 sizes of Full alpha and also numeral 0-9 Matthew metal stamps with box. Posted with 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-140a5946ff4-0xfa-
This is a U.S.A. made 17" Rockwell drill press on a mobile base for sale. It has a 1.5 hp motor. 120 volt, single phase and is a variable speed machine. Very nice condition floor model. I have added a custom slow speed attachment for drilling up to 1" in soft steel. Number 2 morse taper spindle with the drill chuck and key included. This unit runs quiet, no vibration, smooth speed changes. I am downsizing my operation and have a Bridgeport and another drill press, this one offered for sale. See my other items. Please see pictures. Free delivery within a 100 mile radius of Terre Haute. In. Buyer pays all truck shipping fees if shipped.
Drill press is missing parts.All parts are currently still available at Cameron micro drill press.This model 164 series retails well over $ 1000.00.Spindle with bearings is very tight and in very good condition.Used for drilling holes from.002 to 5/32"
Used Champion Cutting Tool RotoBrute RB32 MiniBrute Magnetic Drill Press-Portable! MINT CONDITION! Champion MiniBrute Magnetic Drill Press Variable Speed- Model RB32-VSR The same features as the RB32 but has variable speed control and reverse. It also features an isolating power relay for improved handling safety. This machine can run twist drills at correct RPM and has optional tapping attachments. Champion's RotoBrute system delivers the quickest and easiest holemaking solution for making larger diameter holes in structural steel and beams. The RotoBrute drilling system features a complete line of Magnetic Drill Presses and Annular Cutters. Which are engineered to drill large diameter holes in structural steel from 7/16" to 4" diameter. At the core of the RotoBrute system is the broadest range of carbide tipped and high speed ... moresteel Annular Cutters. Champion High Speed Steel Cutters feature the exclusive Plus20 surface treatment giving cleaner cuts, positive slug ejection and long tool life. Features: Weighs only 28 lbs, 1-1/4" diameter Cutter Capacity, Built-in fluid reservoir, 6" vertical travel, Quick-Change arbor support for conversion from cutter to drill chuck, Reversible handles for use in restrictive operating conditions, Wide. High density magnet for greater stability, Isolating power relay for improved safety, Reliable Hitachi D13 motor, Benefits: Lighter weight makes handling& transport easier and safer, Same capacity as machines weighing much more, Delivers the coolant to work place and cutter, Left hand use and operating in restrictive areas, Utilizes S&D drills up to 3/4" Specifications: Cut Depth 6" Cutter Capacity 1-1/4" Drill Capacity-3/4" Height-12" Length-9-1/2" Motor-Speed 550 RPM, Weight-28 Lbs, Width-3-1/2" 2200 lbs holding strength, 720 watts, List Price: $2.215.20 Price: $1.498.00 You Save: $717.20(32%
This Delta Rockwell 1/2 hp single phase motor was removed from functioning 24" delta scroll saw. It can also be used on a band saw. Sander, drill press or other tool that requires a 1725 rpm motor. This motor is dual voltage currently set at 115 volts but can be changed to run on 230 volts. It is a reversible motor with dual 1/2" shafts. It is a model 62-110 motor that has a 56-4 frame. It will need a new cord and plug. New paint job? The motor fires right up and the bearings are good. One shaft has some damage from set scerws as seen in the last photo.
BE SURE TO REED THIS WHOLE ADD. THIS IS A DELTA VARI SPEED DRILL PRESS THE MOD. IS 20. RPM 200-2000 THE TABLE IS 16X 18 AND TILTS. ALSO HAS RAISING AND LOWERING CRANK. EVERYTHING IS FREE AND MOVING. THAT IS SPINDLE. SPINDLE UP-DOWN, TABLE CRANK AND VARI SPPED HANDLE. THE DRILL WAS STORED OUTSIDE FOR A WHILE. I HAD TO FREE THOSE THINGS UP THEY WERE NOT THAT BAD THEY LOOSENED WRIGHT UP. I CLEANED A LITTLE OF THE COLOUM THERE IS A BREAK IN THE CASTING ON THE BOTTOM LOOKS LIKE A FORK-LIFT HIT IT. IT DOES NOT AFFECT THE USE AT ALL. THE VOLT. IS 480 3-PH SO I CANT RUN IT. SELLING AS IS AS SEEN NO RETURNS. AND DONT WANT TO HEAR ANY COMPLAINTS. I WILL LOAD FREE. YOU ARRANGE YOUR SHIPPING. THE DRILL IS HEAVY. MAYBE 375 LBS.
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. POWERMATIC SINGLE SPINDLE DRILL MODEL: 1200 HD SERIAL NUMBER: 0202020013 GENERAL SPECIFICATIONS Floor Model Swing: 20" Spindle Taper: No. 3 M.T. Quill Diameter: 2-3/4" Column Length: 66" Spindle Stroke: 6" Spindle Speeds. Electronic Variable: 50 to 1820 RPM Table Size: 15-1/2" x 18" Base Working Surface: 13-1/2" x 18" EQUIPPED WITH 2 HP Motor Electronic Speed Control-Baldor AC Inverter Reversing Switch Table Raising Mechanism Approximate Weight: 600 Lbs. Our stock number: 27136. F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold ... moreprevious to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: If we set up shipping item will ship freight collect via FreightQuote.com. Echo Global Logistics, ICCI or any other company we are using at the time. Buyer is welcome to look for a cheaper freight rate and set up shipping with any company they choose. Buyer may also pick up. Echo Global Logistics: Evan Zack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing an
THIS IS A LIGHTLY USED FMT MAGBOSS MAGNETIC DRILL PRESS. 120 VOLT. 10 AMP, 450 RPMS, HOLE DIAMETER 1 1/2" HOLE DEPTH 2" STROKE LENGH 4 3/4" MAGNETIC FORCE 1900 POUNDS. MOTOR MADE IN GERMANY, BASE MADE IN ENGLAND. SOLD BY FASTENAL. DRILL IS LESS THAN A 1 YEAR OLD. TOOL IS IN GOOD WORKING AND NICE OVERALL CONDITION. SHIPS NEXT BUSINESS DAY. THANKS FOR LOOKING
What I believe this to be is a machinery oiler.Used to lubricate surface being worked on and wuld be suitable for drill press work or power hacksaw.There is an adjusting screw to control amount of lubricant to surface.I do not see any mfg name. Payment due within 5 da of sale.NO International.Ins buyrs respon
Thanks for Looking! Check my other listings and bookmark my ebay store. I have HUNDREDS of interesting items and add more all the time! You are bidding on a used 1/8" 5/8" drill chuck. JT3 Jacobs taper mount, In excellent used condition, does not include chuck key. Payment Policy Payment required through Paypal within seven days of auction end. If you expect a delay in payment. Please notify me. Returns Policy Returns accepted within 14 days. Buyer pays return shipping. Satisfaction guaranteed or your money back. Powered by The free listing tool. List your items fast and easy and manage your active items.
Jacobs chuck with shaft and key
Welcome. Bidders! Up For Sale We Have A- W H Nichols Drill Press or Mill Vise with 5 Inch Jaws. Opens 3 Inches in Excellent Condition Please Note- This Vise weighs in at about 45 pounds, so the shipping will be expensive. If you are close enough to Pearl River. NY you can pick it up here. Contact me for details. READ THE DESCRIPTION CAREFULLY The photos below show the ACTUAL ITEM you are bidding on. Please click on the photo to see High Resolution photos which will open in a new window. When the new window opens. Click on its photo to have it go to FULL size. If you have any questions. Please Ask! I don't honestly know how old this vise is. But I would guess 1940s or 1950s. It was manufactured by W. H. Nichols. Weighs in at about 45 pounds, has 5 inch jaws and opens 3 inches. Is a very nice piece of equipment, and was used in my father's ... morecompany until they closed in the early 1980s. Since then, it has seen light use on my drill press. I have never really needed a vise like this. But it did what I needed it to do so I kept it. At this point, I'm changing some things around in my shop and have decided to sell this vise to help fund some upgrades. As you can see from the photos. It is in Excellent Condition except for two minor divots. Due to careless drilling. The crank handle is included and it operates as smooth as silk. I'm happy to answer any questions you may have. And provide additional photos if necessary. Shipping Weight Will Be about 50 Pounds I SHIP TO ALL 50 UNITED STATES Item will ship via Insured USPS Standard Post and will be Carefully packed for Maximum Protection. INTERNATIONAL SHIPPING Sorry. NO International Shipping COMBINED SHIPPING I am happy to pack multiple items in the same box to save you money. Just email me to let me know you will be making multiple purchases and I'll hold the shipment. Then make your other purchases as you normally would. After everything is packed and I know what the total shipping cost will be. I'll send a refund of the overcharge through Paypal
Description You are bidding on the antique Palmgren#10 vise you see in the photographs. I'm not sure exactly how old it is. I know it is definitely used. But it seems to be in good condition. The handle pin for the vise is bent. Please see the photographs for all details. I'm selling this AS/IS. Payment I accept payment exclusively through Paypal. Payments received within 24 hours are greatly appreciated. If you can't pay within 24 hours. Please notify me as to when I should expect payment. I reserve the right to unilaterally cancel the transaction and potentially leave negative feedback if payment is not received within 72 hours and I do not hear from you. Shipping I am a one man operation. And pride myself on the quality of my packaging. I try to ship within three days of receiving payment. Items paid for on Friday, Saturday ... moreor Sunday will not be processed before Monday. A minimal packaging/handling fee is sometimes factored into the shipping cost. I often use an approximate weight to calculate shipping costs. In most cases this amount suffices; in the unlikely event the actual shipping cost exceeds what you've paid, I'll request the difference but give you the option of canceling the transaction. I generally ship via USPS Parcel Post or USPS Priority Mail. I sometimes offer UPS as an option and am not averse to using FedEX. If you have a FedEx or UPS account. I'm happy to use it. In such a case, I would only charge you the packaging fee, if any, for the item purchased. Terms of Sale The terms of sale are generally stated in each listing. I pride myself on accurately describing each item's condition. Basically. If the item you receive is materially different from what I have described, you are entitled to a refund. About Us I try to sell an eclectic assortment of rare and valuable items. I am an excellent communicator and very easy to conduct business with. My reputation is very important to me. And I strive for 100% positive feedback. If you have any problems or issues, please conta
i have one"speedy 60-A air vice" has some wear and a little rusted but it still works fine. i am just house cleaning things we don't use.
JAWS REAL CLEAN.VERY GOOD USABLE CONDITION. ALL QUESTIONS WELCOMED BEFORE BIDDING*PLEASE NOTE*I AM NOT AN EXPERIENCED MACHINIST AND MOST OF THESE ITEMS HAVE BEEN ACQUIRED FROM A RETIRED MACHINIST AND MAY NEED CLEANING.MAY HAVE SOME PITTING OR LIGHT SURFACE RUST,MAY BE INSCRIBED WITH INITIALS& S,REGROUND OR ALTERED,MAY NEED FURTHER METICULOUS CLEANING,MAY NOT BE FULLY ACCURATE AND MAY BE CHIPPED.NEED SHARPENING AND MAY HAVE DUPLICATE SIZES BUT MOST ITEMS SHOULD BE USABLE(UNLESS OTHERWISE INDICATED)AND GOOD FOR AN APPRENTICE OR A SECOND TOOL TRAY AROUND THE LATHE OR MILL OR FOR THE BASEMENT NIGHT SHOP*PLEASE FEEL FREE TO ASK ANY QUESTIONS ABOUT SIZES OR CONDITION OR ANYTHING AND PLEASE CHECK OUT MY OTHER CUTTING TOOLS,TOOLING,TOOL HOLDING,COLLECTIBLES AND OTHER USABLE STANLEY STARRETT,BROWN& SHARPE,LUFKIN ETC MACHINIST'S TOOLS AND ... moreOTHER TRADE TOOLS& EQUIPMENT BY CLICKING BELOW OR ABOVE ONTO"VIEW SELLERS OTHER ITEMS"Please Check out my! NOTE*MORE TOOLS AND STUFF FOR AUCTION IN UPCOMING WEEKS*NOTE I'M TRYING TO STAY AWAY FROM A"BUY IT NOW" PRICE BUT IF YOU ARE DETERMINED PLEASE EMAIL YOUR HIGHEST OFFER(PAY PAL ONLY) AND I WILL ANSWER EITHER WAY.THANKS*AS ALWAYS MULTIPLE PURCHASES WILL DECREASE ALREADY LOW SHIPPING COSTS.PLEASE READ BELOW* IF YOU WOULD LIKE TO CARRY OVER A PURCHASE FROM ONE WEEK TO THE NEXT TO SAVE SHIPPING THAT'S FINE BUT I WILL REQUIRE PAYMENT ONLY ON ITEMS PURCHASED WHILE HOLDING TO KEEP MY EBAY UP TO DATE.THANK YOU FOR YOUR UNDERSTANDING* OVERSEAS SHIPMENTS WELCOMED BUT RESTRICTED TO LIGHTWEIGHT AND SMALL ITEMS ONLY. THERE WILL BE AN ADDITIONAL $4.00 HANDLING FEE ADDED TO THE PRE-DETERMINED INTERNATIONAL SHIPPING QUOTE*INSURANCE MAY BE REQUIRED ON SOME PURCHASES* ALERT*SAVE MONEY $$$$$$$$$$ ESPECIALLY TO COMBINE SHIPPING ON MULTIPLE PURCHASED ITEMS IF ITEM(S) FIT IN THE SMALLEST USPS PRIORITY FLAT RATE BOX OR ENVELOPE I WILL SHIP IT FOR $5.00(UNDER 4 POUNDS)