|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts ... moreand crafts DIY Design (Note：No Laser Head Included) Description: This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly. It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern. Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast asse.
Buy It Now
$100.00 Shipping Condition: New Location: Chino, United States Engraving Machine Parameters: X, Y, Z Working Area: 600(Y)*390（X）*120(Z)Mm Outside Dimension: 865*680*570mm（L*W*H） Table Size: 770（Y）*490（X）Mm Lathe Structure: ... more6061/6063 Aluminium Alloy Max. Feeding Height: ≤100mm Drive Unit: X Axis---1605 Ball Screws Y Axis---1605 Ball Screws Z Axis---1204 Ball Screws Sliding Unit: X Axis---High Intensity Chromeplate Shaft Y Axis---High Intensity Chromeplate Shaft Z Axis---High Intensity Chromeplate Shaft Stepping Motor: 57 Two-phase 3a 150n.cm Package Include 1 * Remote Controller 1 * Cable .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Details Hand Wheel: Its hand wheel is engraved with a scale and equipped with a locking device, providing you with a more accurate operation. Surface ... moreTreatment: Its surface is sandblasted and oxidized to make it more beautiful and professional while having better corrosion resistance. Application This linear stage actuator travel is widely used in dispensing machines, engraving machines, punching machines, 3D printers, mask machines, and other automation equipment. Specification Model: KR60S-100 Round Guide Rail Model: HG15 Screw Rod: 1605 Color: Silver Type: Manual Guide Rail Type: Double Optical Axis Guide Material: 606 Aluminium Surface Treatment: Sand Blasting Oxidation Treatment Process: CNC Position Accuracy: ±0.05mm/ 0.002in Ball Screw Diameter: 16mm/ 0.63in.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Included 1 Set* cutter 1* Z Probe 1* Right-y-axis 1* U Disk 1* Usb 1* Power Supply 1*Power Cable 4* Clamps 1*Manual Other Accessories for Installation ... moreGood Control Performance The 42 two-phase stepper motor has good control performance. The starting, stopping, and flipping are done within a few pulses. Also, the machine is equipped with limits in several directions to prevent accidental touching of the edges and to reduce damage to the machine.
Buy It Now
Free Shipping Condition: New Location: United States I am interested in this CNC machine but i don't know how to use it. Answer: We have video to show how to operate our machine ,If you still don't know ... moreafter check the video and we can provide remote assistance.
Buy It Now
$40.00 Shipping Condition: New Location: Chino, United States Specification Color: Blue, Silver Material: Aluminum, Wood Maximum Workpiece Thickness: 78mm/3.07inch Effective Stroke: 400*400*83mm/15.75*15.75*3.27inch ... moreDrive Power: 12V 5A Spindle Power: 75W Voltage: 110V Power: 100W Spindle Speed: 0-10000rpm Spindle Accuracy: Radial Runout ≤ 0.05mm Stepper Motor: 42 Two-phase Stepper Motor Rotation Speed: 6000rpm Acceptable Software: GRBL/Candle Communication Interface: USB Gross Weight: 12kg/26.46lbs Engraving Speed: 50-1500mm / min (Depending on the Material Speed Setting) Standard Spindle: 42mm High-Speed Spindle / ER11 Chuck / 3.175mm Clamping Centre Workbench Size: 60*52cm/23.62*20.47inch Product Size: 74.5*61.5*39cm/29.33*24.21*15.35inch Package Size: 67*39*29cm/26.38*15.35*11.42inch.
Buy It Now
Free Shipping Condition: New Location: Chino, United States The Spindle Motor Must Connect with the Vfd. Volts, Current, Power: Ac110v, 60hz, 5a, 1.5 Kw Vfd. the Machine Can Connect with Computer As Other External ... moreDevice Such As Printer, Scanner. Pcb Engineer.
Buy It Now
Free Shipping Condition: New Location: Chino, United States SKU: 3-1.5KW6040A-USB+3-1.5KW6040B-USB+TS007USB Attention: It is also not recommended to connect to a computers with 64 bit versions of Windows due to ... moreproblems with the usb port driver. Description: Suitable for PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper, 1. This 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. 3. It can used for engraving: advertising signs, PCB.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1500W 3 Axis 6040 CNC Router Milling Machine 3D Desktop Engraver w/ Handwheel.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1500W 3 Axis 6040 CNC Router Milling Machine 3D Desktop Engraver w/ Handwheel.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Included 1 Set* cutter 1* Z Probe 1* Right-Y-axis 1* U Disk 1* USB 1* Power Supply 1*Power Cable 4* Clamps 1*Manual Other Accessories for Installation ... moreNotes Please read the manual completely before installation and use. And pay particular attention to the safety instructions included. It can't be used to carve hard metals, jade, or other hard objects. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Buy It Now
Free Shipping Condition: New Location: Chino, United States This 6040 machine is suitable for industry, Technology Research, Advertising Design. The machine can connect with computeras other external device such ... moreas printer, scanner. like aluminum, copper and silver to engrave them into 3D/2D works etc.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Rahmenmaterial: Die gesamte Maschine verwendete 6061 Aluminiumprofile Max. Förderhöhe: ≤140mm (Von der Basis der Z-Achse zur Plattform) X, Y, Z Arbeitsbereich: ... more600x900x150mm Schiebeeinheit: X-Achse: SFU1605 Kugelgewindetriebe; Y-Achse: SFU1605 Kugelgewindetriebe; Z-Achse: SFU1204 Kugelgewindetriebe Antriebseinheit: X-Achse: ø20 Hochintensive Rundschiene, Y-Achse: hochfeste Aluminium-Basisschienen SBRø20; Z-Achse: ø12 hochfeste Rundschiene Schrittmotor: zweiphasig 3A (mit Handrädern) Antriebsleistung für Schrittmotor: AC110,240W, Ausgang DC24V10A Maximale Leerlaufdrehzahl: 1500mm / m Arbeitsgeschwindigkeit: 50-1500mm / min (unterschiedliches Material mit verschiedenen Geschwindigkeitseinstellungen) Spindelmotor: 2200W Hochgeschwindigkeits-Spindelmotor mit variabler Frequenz,.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Running Direction: X, Y, Z Axis. Features: Manual Knobs and Limit Switches for X, Y, Z Axis. Engraving File Format: Nc/Jpg / Png / Tif / Bmp. 1 Box of ... more10cs Cutter(3.175mm). Stepper Motor：two Phase, 42 Stepper Motor.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Chuck type: Standard ER32 collet 3~20mm (Hollow shaft). 11 pcs complete set ER32 collet 11 pcs complete set ER32 collet3mm,4mm,5mm,6mm,8mm,10mm,12mm,14mm,16mm,18mm,20mm. ... moreAxis: 80RPM. Step motor: 57 phase stepper motor (two-phase 4 wire current 3A ).
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States This 6040 machine is suitable for industry, Technology Research, Advertising Design. The machine can connect with computeras other external device such ... moreas printer, scanner. X axis---1605 Ball Screws.
Buy It Now
$10.00 Shipping Condition: New Location: Chino, United States Accurate Engraving Is Not Possible Without an Engraving Machine. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). ... moreWide Application: with an Effective Engraving Area of 400 400 83mm, the Machine Can Easily Accommodate Most Projects.
Buy It Now
$66.00 Shipping Condition: New Location: Canada 1 x RSHC102000 Item Rack module 1.0 2000mm/79". Rack Straight Teeth material C45 Steel (C). Module 1.0. Pinion/Spear Gear material C45 Steel.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Mode：3018pro Aluminum Upgrade Frame Materials: Aluminum Alloy and Pvc Panel Outer Dimension: 415x449x371mm Running Direction: X, Y, Z Axis Sliding Rods: ... moreX Rod: Dia 12mm, Y: Dia 10mm, Z: Dia 8mm Screw Driving Rod: Tr8-8 Steel Screw Rod Working Area: 300mm X180mm Features: Manual Knobs and Limit Switches for X, Y, Z Axis. On the Right Side of Frame, There Is a Emergency Button for Protection. Spindle Driller: Motor775 Stepper Motor：two Phase, 42 Stepper Motor Engraving File Format: Nc/Jpg / Png / Tif / Bmp Communication Interface: Usb Port to Computer. Application: Wood, Pvc, Mdf, Bamboo, Leather Operation Software: Grbl-candle,Popular Designing Software: Artcam, Carveco, Lightburn Pack Size: 53x45x30cm Pack Weight: About11.5kg Machine Color: Blue Package List: 1set.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Accurate engraving is not possible without an engraving machine. Wide Application: With an effective engraving area of 400 400 83mm, the machine can easily ... moreaccommodate most projects. DIY: The mini DIY engraving machine can be used to make gifts for your friends and exercise your hands-on skills.
Buy It Now
Free Shipping Condition: New Location: Chino, United States The machine is designed for engraving plastic, acrylic, PVC, PCB, wood, and similar materials. Unlock your creativity and take your DIY projects to the ... morenext level with the CNC 3018-Pro! Spindle: 775 spindle motor.
Buy It Now
Free Shipping Condition: New Location: Chino, United States The Spindle Motor Must Connect with the Vfd. Volts, Current, Power: Ac110v, 60hz, 5a, 1.5 Kw Vfd. the Machine Can Connect with Computer As Other External ... moreDevice Such As Printer, Scanner. Pcb Engineer.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 6040 3 AXIS USB ROUTER ENGRAVER MACHINE ENGRAVING MILLING DRILLING 1500W VFD Dear Cutomer: We only sell the machine, not include the software. If you ... morewant it, please go to the official website to buy the Genuine! Thank you for your love and support for our products. Applicable User&Skills： 1. Advertising&Design staff 2. PCB Engineer 3. Woodwork fans 4. Model fans 5. User should better have electronics background 6. DIY ability to repair Highlights of water cooling system : It can cool the spindle and protect the machine Avoid the spindle burn out Can engrave the high hardness or metal It can improve the efficiency and accuracy of the machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Spindle motor: 1500W high-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur. 1X Sinal cable for A axis. 12X Aluminium fastener. 2X ... morecutter 2 6mm. 2X cutter 3 6mm. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1. This 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2. ... moreIt can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. 3. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. 4. The mini router Frame is movable. The machine can connect with computer as other external device such as printer, scanner.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Package Include: 1 X CNC Z Axis Engraving Machine Tool Specifications: Model : Automatic Tool Setting Color : Black + Silver Material: Grinding 4s+ Superhard ... moreAlloy Output Mode: Normally Closed Normally Closed Specification Technical Parameters Output Mode: Bnc (Normally Closed) Pre-trip: Almost Zero Stroke: 5mm Repeatability: 0.001mm (Condition: Operating Speed 50-200mm / Min) Contact Life: 3 Million Times Protection Structure: IP67 Contact Force: 1.5N Contact Material: Super Hard Alloy Housing Material: Grinding 4S Contact Rating: DC24V 20mA (Max) (Recommended Value 10ma) Resistance Load Cable: 3m Oil Resistant °4 Core ∞5 Tensile Strength 307n Minimum Bending Radius R7 Protection Tube: Minimum Bending Radius 1 M R25 Alarm Signal When the Trip Is Exceeded.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts ... moreand crafts DIY Design (Note：No Laser Head Included) Description: This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly. It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern. Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast asse.
Buy It Now
Free Shipping Condition: New Location: Chino, United States It is safer with a case to keep the spindle and dust inside while engraving. Experiencing the Joy of DIY: The mini DIY engraving machine can be used to ... moremake gifts for your friends and exercise your hands-on skills.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1500W 3 Axis 6040 CNC Router Milling Machine 3D Desktop Engraver w/ Handwheel.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Running Direction: X, Y, Z Axis. Features: Manual Knobs and Limit Switches for X, Y, Z Axis. Engraving File Format: Nc/Jpg / Png / Tif / Bmp. 1 Box of ... more10cs Cutter(3.175mm). Stepper Motor：two Phase, 42 Stepper Motor.
Buy It Now
$154.00 Shipping Condition: New Location: Chino, United States Rahmenmaterial: Die gesamte Maschine verwendete 6061 Aluminiumprofile Max. Förderhöhe: ≤140mm (Von der Basis der Z-Achse zur Plattform) X, Y, Z Arbeitsbereich: ... more600x900x150mm Schiebeeinheit: X-Achse: SFU1605 Kugelgewindetriebe; Y-Achse: SFU1605 Kugelgewindetriebe; Z-Achse: SFU1204 Kugelgewindetriebe Antriebseinheit: X-Achse: ø20 Hochintensive Rundschiene, Y-Achse: hochfeste Aluminium-Basisschienen SBRø20; Z-Achse: ø12 hochfeste Rundschiene Schrittmotor: zweiphasig 3A (mit Handrädern) Antriebsleistung für Schrittmotor: AC110,240W, Ausgang DC24V10A Maximale Leerlaufdrehzahl: 1500mm / m Arbeitsgeschwindigkeit: 50-1500mm / min (unterschiedliches Material mit verschiedenen Geschwindigkeitseinstellungen) Spindelmotor: 2200W Hochgeschwindigkeits-Spindelmotor mit variabler Frequenz,.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States ER11 CNC 3018-PRO Router Machine Laser Engraving Offline Control Emergency-Stop.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Mode：3018pro Aluminum Upgrade Frame Materials: Aluminum Alloy and Pvc Panel Outer Dimension: 415x449x371mm Running Direction: X, Y, Z Axis Sliding Rods: ... moreX Rod: Dia 12mm, Y: Dia 10mm, Z: Dia 8mm Screw Driving Rod: Tr8-8 Steel Screw Rod Working Area: 300mm X180mm Features: Manual Knobs and Limit Switches for X, Y, Z Axis. On the Right Side of Frame, There Is a Emergency Button for Protection. Spindle Driller: Motor775 Stepper Motor：two Phase, 42 Stepper Motor Engraving File Format: Nc/Jpg / Png / Tif / Bmp Communication Interface: Usb Port to Computer. Application: Wood, Pvc, Mdf, Bamboo, Leather Operation Software: Grbl-candle,Popular Designing Software: Artcam, Carveco, Lightburn Pack Size: 53x45x30cm Pack Weight: About11.5kg Machine Color: Blue Package List: 1set.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Engraving Machine Parameters: X, Y, Z Working Area: 600(Y)*390（X）*120(Z)Mm Outside Dimension: 865*680*570mm（L*W*H） Table Size: 770（Y）*490（X）Mm Lathe Structure: ... more6061/6063 Aluminium Alloy Max. Feeding Height: ≤100mm Drive Unit: X Axis---1605 Ball Screws Y Axis---1605 Ball Screws Z Axis---1204 Ball Screws Sliding Unit: X Axis---High Intensity Chromeplate Shaft Y Axis---High Intensity Chromeplate Shaft Z Axis---High Intensity Chromeplate Shaft Stepping Motor: 57 Two-phase 3a 150n.cm Package Include 1 * Remote Controller 1 * Cable .
Buy It Now
Free Shipping Condition: New Location: Chino, United States 4Axis USB 1500W Router Engraving Machine Engraver For Wood Acrylic 6090 Ball Screw SKU: 1500W-6090T1-USB+1500W-6090T2-USB+TS009USB Description: 6090 Router ... moreengraving machine parameters: Model: 6090GZ Outside dimension: 1150*970*650mm(L*W*H) Working platform size: 1045*720mm(L*W) Frame Material：The whole machine used 6061 aluminum profiles Max. Feeding height: ≤140mm(From base of Z axis to platform) X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z) Sliding unit: X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws Drive unit: X axis: ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails Z axis: ø12 high-strength round rail Stepping motor: 57 two-phase 3A Driving Power for Stepping motor: AC110,.
Buy It Now
$19.98 Shipping Condition: New Location: Chino, United States Woodworking industry: sculpture, round carving, wooden handicraft processing. Carving command:G code/TAB file/nc/TAB /NCC/file. Programming: E-stop,cycle ... morestart,spindle on/off,Redo,single step,original point.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Chuck type: Standard ER32 collet 3~20mm (Hollow shaft). 11 pcs complete set ER32 collet 11 pcs complete set ER32 collet3mm,4mm,5mm,6mm,8mm,10mm,12mm,14mm,16mm,18mm,20mm. ... moreAxis: 80RPM. Step motor: 57 phase stepper motor (two-phase 4 wire current 3A ).
Buy It Now
Free Shipping Condition: New Location: China M5 0.8 D6 50，M6.0 1.0 D6 50，M8 1.25 D6 50，M10 1.5 D8 60，M12 1.75 D10 75. M1.6 0.35 D4 50,M2.0 0.4 D4 50,M2.5 0.45 D4 50，M3 0.5 D4 50，M4 0.7 D4 50，. Twist ... moreDrill Bit. Thread Repair Kit. Diamond Drill Bit.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 4040 CNC Engraving Machine 3 Axis PCB Wood Carving DIY Milling Kit USB GRBL 100W. Accurate engraving is not possible without an engraving machine. Wide ... moreApplication: With an effective engraving area of 400 400 83mm, the machine can easily accommodate most projects.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Accurate Engraving Is Not Possible Without an Engraving Machine. the Aluminum Frame Engraving Machine Is More Durable, Stronger, and Has a ... moreLong Service Life. the Engraving Machine with the Industrial-grade Chip and 75w High-power Spindle Motor Takes a Very Short Time to Complete the Engraving, Which Is More Highly Efficient.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: 1. This 6040t Machine Is Suitable for Industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby ... morePurposes. 2. It Can Work with Various Materials(Metallic & Non-metallic), Such As: Wood, Pmma or Other Plastic, Mdf Board, Native Wood, Pvc, Acrylic, Wood, Composite Board Plywood. and Soft Metal, like Aluminum, Copper and Silver to Engrave Them into 3d/2d Works Etc. 3. It Can Used for Engraving: Advertising Signs, Pcb, Nameplates, Badges, Seals, Bronzing Plate, Aluminum Alloy, Acrylic Plates, Abs Resin Double Color Plate, Pvc Foaming Board, Indentation Plates, Signs, Construction Models, Instrument Panels, Wooden Products, Etc.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 4Axis USB 1500W Router Engraving Machine Engraver For Wood Acrylic 6090 Ball Screw SKU: 1500W-6090T1-USB+1500W-6090T2-USB+TS009USB Description: 6090 Router ... moreengraving machine parameters: Model: 6090GZ Outside dimension: 1150*970*650mm(L*W*H) Working platform size: 1045*720mm(L*W) Frame Material：The whole machine used 6061 aluminum profiles Max. Feeding height: ≤140mm(From base of Z axis to platform) X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z) Sliding unit: X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws Drive unit: X axis: ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails Z axis: ø12 high-strength round rail Stepping motor: 57 two-phase 3A (with handwheels) Driving Power for Stepping motor.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Chuck type: Standard ER32 collet 3~20mm (Hollow shaft). 11 pcs complete set ER32 collet 11 pcs complete set ER32 collet3mm,4mm,5mm,6mm,8mm,10mm,12mm,14mm,16mm,18mm,20mm. ... moreAxis: 80RPM. Step motor: 57 phase stepper motor (two-phase 4 wire current 3A ).
Buy It Now
Free Shipping Condition: New Location: Chino, United States CNC Router engraving machine parameters: Model: CNC6090GZ Outside dimension:1150*970*650mm(L*W*H) Working platform size:1045*720mm(L*W) Frame Material：The ... morewhole machine used 6061 aluminum profiles Max. Feeding height:≤140mm(From base of Z axis to platform) X,Y,Z Working Area:900(Y)*600(X)*140mm(Z) Sliding unit: X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws Drive unit: X axis:ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails Z axis: ø12 high-strength round rail Stepping motor：57 two-phase 3A (with handwheels) Driving Power for Stepping motor：AC110, 240W, out put:DC24V10A Maximum Idle speed:1500mm/min Working Speed :50-1500mm / min (different material with different speed settings).
Buy It Now
Free Shipping Condition: New Location: Mount Pleasant, United States Introducing Z-SET, the smallest self contained tool setter on the market! Single LED Indicator Provides Years of Battery Life. Patent Pending. Small Compact ... moreDesign. Single CR1632 Battery (Included). Works on any Material.
Buy It Now
Free Shipping Condition: New Location: United States 2 Years Warranty SKU: 1500W-6040TUSB-1+1500W-6040TUSB-2+1500W-TS002USB Description: 1. This 6040T machine is suitable for industry, Technology Research, ... moreAdvertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal, like aluminum, copper and silver to engrave them into 3D/2D works etc. 3. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. 4. The mini router.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 4Axis USB 1500W Router Engraving Machine Engraver For Wood Acrylic 6090 Ball Screw SKU: 1500W-6090T1-USB+1500W-6090T2-USB+TS009USB Description: 6090 Router ... moreengraving machine parameters: Model: 6090GZ Outside dimension: 1150*970*650mm(L*W*H) Working platform size: 1045*720mm(L*W) Frame Material：The whole machine used 6061 aluminum profiles Max. Feeding height: ≤140mm(From base of Z axis to platform) X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z) Sliding unit: X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws Drive unit: X axis: ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails Z axis: ø12 high-strength round rail Stepping motor: 57 two-phase 3A Driving Power for Stepping motor: AC110,.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States SKU: 3-1.5KW6040A-USB+3-1.5KW6040B-USB+TS007USB Attention: It is also not recommended to connect to a computers with 64 bit versions of Windows due to ... moreproblems with the usb port driver. Description: Suitable for PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper, 1. This 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. 3. It can used for engraving: advertising signs, PCB.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Engraving Machine Parameters: X, Y, Z Working Area: 600(Y)*390（X）*120(Z)Mm Outside Dimension: 865*680*570mm（L*W*H） Table Size: 770（Y）*490（X）Mm Lathe Structure: ... more6061/6063 Aluminium Alloy Max. Feeding Height: ≤100mm Drive Unit: X Axis---1605 Ball Screws Y Axis---1605 Ball Screws Z Axis---1204 Ball Screws Sliding Unit: X Axis---High Intensity Chromeplate Shaft Y Axis---High Intensity Chromeplate Shaft Z Axis---High Intensity Chromeplate Shaft Stepping Motor: 57 Two-phase 3a 150n.cm Package Include 1 * Remote Controller 1 * Cable .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Include 1 * Remote controller 1 * Cable .
Buy It Now
Free Shipping Condition: New Location: United States Spindle motor: 2200W high-speed variable frequency spindle motor, ER20 chuck, matching 6mm bur. 2X Fence baffle. 1X Sinal cable for A axis. 12X Aluminium ... morefastener. 2X cutter 2 6mm. 2X cutter 3 6mm. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States This 6040 machine is suitable for industry, Technology Research, Advertising Design. The machine can connect with computeras other external device such ... moreas printer, scanner. X axis---1605 Ball Screws.
Buy It Now
$2107.40 Shipping Condition: New Location: China Whole machine sample.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 6090 router 4Axis+2.2kw Spindle motor +VFD +USB Port Metal Wood Engraver with tool sensor Description Router engraving machine parameters: Model: 6090GZ ... moreOutside dimension: 1150x970x650mm(LxWxH) Working platform size: 1045x720mm(LxW) Frame Material: The whole machine used 6061 aluminum profiles Max. Feeding height: ≤140mm(From base of Z axis to platform) X,Y,Z Working Area: 600x900x150mm Sliding unit: X axis:SFU1605 Ball Screws;Y axis:SFU1605 Ball Screws;Z axis:SFU1204 Ball Screws Drive unit:X axis:ø20 High intensity round rail,Y axis: SBRø20 high-strength aluminum base rails;Z axis: ø12 high-strength round rail Stepping motor: two-phase 3A (with handwheels) Driving Power for Stepping motor: AC110,240W, Output DC24V10A Maximum Idle speed:1500mm/m Working Speed:50-1500mm/mi.
Buy It Now
$6.95 Shipping Condition: New Location: Sykesville, United States
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States The spindle motor must connect with the VFD. VOLTS, current, power: AC110V, 60Hz, 5A,1.5 KW VFD;. The machine can connect with computer as other external ... moredevice such as printer, scanner. X axis---1605 Ball Screws.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Specifications: Model : Automatic tool setting Color : Black + Silver Material: Grinding 4S+ superhard alloy Output mode: normally closed Normally closed ... morespecification technical parameters Output mode: BNC (normally closed) Pre-trip: almost zero Stroke: 5mm Repeatability: 0.001mm (condition: operating speed 50-200mm / min) Contact life: 3 million times Protection structure: IP67 Contact force: 1.5N Contact material: super hard alloy Housing material: grinding 4S Contact rating: DC24V 20mA (MAX) (recommended value 10mA) resistance load Cable: 3m oil resistant °4 core ∞5 tensile strength 307N minimum bending radius R7 Protection tube: minimum bending radius 1 m R25 Alarm signal when the trip is exceeded Output mode: BNC (normally closed) (2.5mm from the measurement signal).
Buy It Now
Free Shipping Condition: New Location: Chino, United States 4040 CNC Machine Kit. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). Material: Aluminum, Wood. With an effective ... moreengraving area of 400 400 83mm, the machine can easily accommodate most projects.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Accurate engraving is not possible without an engraving machine. Wide Application: With an effective engraving area of 400 400 83mm, the machine can easily ... moreaccommodate most projects. DIY: The mini DIY engraving machine can be used to make gifts for your friends and exercise your hands-on skills.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Included 1 Set* cutter 1* Z Probe 1* Right-Y-axis 1* U Disk 1* USB 1* Power Supply 1*Power Cable 4* Clamps 1*Manual Other Accessories for Installation.
|
|
|
|
CNC Lathe Turret Drill, Reamer & Boring Bar Holders Lot of 2 Coolant Thru
CNC Lathe Turret Tool Holders 1 1/2" Bore. Drill. Reamer& Boring Bar Holders Lot of 2, Coolant Thru, Bolt Hole sizes Approx. 3/8" ID, 3" Center to center left to right, 1 1/2" Front to Back, Slot is 1" wide, Selling as You see them, Make unknown. Free shipping in USA Only.
|
|
|
Lot of 30 FAZ, Siemens, Moeller, ABB, Medex, CNC, Delixi, CBI, A-B, Fuji Circui
Lot of 30 FAZ. Siemens, Moeller, ABB, Medex, CNC, Delixi, CBI, A-B, Fuji Circui Manufacturer:FAZ. Siemens, Moeller, ABB, Medex, CNC, Delixi, CBI, A-B, Fuji Model/Part Number: Details:Wolesale Lot of Miscellaneous Breakers. Some of the Item numbers are: CP31D.CP32D, G4A-CNA, 5SM1342-6, CLS6-C10, S272, S271, LC-4A, D20, D40, AES 2x38, S272, 3VU1300-1MP00, DZ47LEII-50/2, DZ47, E16A, QZ-3(13)D, 1492-SP, DZ47, FAZ-3, FLZ3, BM3ZSS-P60 General Classification of Item:USED PULLED FROM WORKING EQUIPMENT Estimated Weight:20.00 Estimated Dims LxWxH(inches) 15.00 x 13.00 x 8.00 Reference Number:T30502 Click an Image to Enlarge Greetings from the Southwest. We are TEAM International Inc, 2nd Hand Store to the Trade. TEAM is a trading company. We buy and sell just about anything. We are always up to making a deal so please feel free to inquire. Check-Out ... moreNow! Click the at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later If you desire a freight quote. Custom shipping, or any extra service we can invoice you after the purchase with your request. Please give us a call or eBay message with your request. Payment We are open to any and all payment methods. We also take credit card payments over the phone. 915) 219-7095• Payments can also be sent to: TEAM International Inc accounts payable 2901 Durazno Ave El Paso TX 79905 Sales Tax: For shipments to Texas addresses. We are required by State law to collect 8.25% Sales Tax. ATTENTION TEXAS RE-SELLERS: If you have a Texas Resale Tax Certificate we can remove the Texas Sales Tax. Shipping We ship all around the world. If you need something out SAME DAY/OVERNIGHT please give us a call to confirm(915) 219-7095• Shipments Under 60 lbs. UPS: Our primary carrier is UPS for domestic shipments. USPS: For International shipments we use USPS DHL International: We can ship on your DHL account. Please send account numb
|
|
|
35 Ton 72" Bed Pacific 35-6 (Tri-Acro-Pacific) PRESS BRAKE, CNC Comp-U-Bend 610
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 35 Ton 72" Bed Pacific 35-6(Tri-Acro-Pacific) PRESS BRAKE. CNC Comp-U-Bend 610 Ref# 151017 iammdna XBRKNC 35 TON x 6' PACIFIC-TRI-ACRO HYDRA-MECHANICAL BRAKE w/ COMP-U-BEND 610 CNC BACKGAUGE ... moreMODEL 35-6 S/N 1255-P NEW 1990 CAPACITY. 6' X 14 GA. 4' X 12 GA. 34" X 10 GA. TONNAGE. 35 TONS PUNCHING CAPACITY. 23.31 TONS OVERALL BED LENGTH. 72" DISTANCE BETWEEN HOUSINGS. 62" STROKE LENGTH. 2" RAM ADJUSTMENT. 3" SHUT HEIGHT. 9" THROAT DEPTH. 9" APPROXIMATE DIMENSIONS. 72" X 40" X 92" H APPROXIMATE WEIGHT. 5.500 LBS EQUIPPED WITH: COMP-U-BEND MODEL 610 CNC BACK GAUGE- STROKE SELECTION- SET UP. INCH OR AUTO RETURN- DUAL PALM BUTTONS ON PEDESTAL STAND- HAND- FOOT SWITCH- VARIABLE SPEED(HI- SLO) Machine Location: HARRISON. NJ Click Here For More Pacific Machines Click Here For More Press Brakes- PRESS BRAKES w/CNC BACK GAUGES(s) Questions about this Machine? Call Rick at(800) 873-6224 ext 7560 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Busine
|
|
|
LASER FIBER 870cm BURN CNC REPRAP LASER FIBER 3D PRINTER CUTTER
For sale is a LASER-FIBER; Length is 870cm; max. power is 0.3kW@932nm/ 0.5kW@808nm One side is SMA. Other is bare fiber(85mm) The fiber is in pristine condition! SCANHEAD. Q-SWITCH AND OTHER LASER-EQUIPMENT IN MY OTHER AUCTIONS SEE SOME OF MY LASER IN ACTION: 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13fda9d54b9-0x105-
|
|
|
LASER FIBER 250cm BURN CNC REPRAP LASER FIBER 3D PRINTER CUTTER
For sale is a LASER-FIBER; Length is 250cm; max. power is 0.3kW@932nm/ 0.5kW@808nm One side is SMA. Other is bare fiber(85mm) The fiber is in pristine condition! SCANHEAD. Q-SWITCH AND OTHER LASER-EQUIPMENT IN MY OTHER AUCTIONS SEE SOME OF MY LASER IN ACTION:
|
|
|
LASER FIBER 210cm BURN CNC REPRAP LASER FIBER 3D PRINTER CUTTER
For sale is a LASER-FIBER; Length is 210cm; max. power is 0.3kW@932nm/ 0.5kW@808nm One side is SMA. Other is bare fiber(85mm) The fiber is in pristine condition! SCANHEAD. Q-SWITCH AND OTHER LASER-EQUIPMENT IN MY OTHER AUCTIONS SEE SOME OF MY LASER IN ACTION:
|
|
|
Sears Craftsman Compucarve System Manual (CNC router)
CompuCarve System Operator's Manual Model No. 183.217540 and Model No. 133.217540 Let me know what model you need in the paypal notes This manual guides you from unpacking the box to Data Entry. Navigating with The keypad and LCD, Built in Functions, and to Carving a Project Shows how to set up router bits correctly A must have for any one new to the system Item will ship thru the postal system. Buyer to pay shipping costs Allow 2 to 5 Business days to Ship MANUAL WILL SHIP ON A CD. THIS IS NOT A PAPER MANUAL Thanks for Looking On Dec-11-08 at 04:44:10 PST. Seller added the following information: I DONT COMBINE SHIPPING UNLESS PRIOR ARRAGEMENTS ARE MADE.IF MULTIPLE MANUALS OF THE SAME AUCTION IS PURCHASED. SHIPPING IS FREE FOR THAT AUCTION ONLY, BUT DOES NOT APPLY TO OTHER AUCTIONS. Powered by The free listing tool. List your items fast ... moreand easy and manage your active items. On Mar-23-13 at 04:06:20 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
MITSUBISHI SERVO MOTOR DRIVER MR-C20A HC-PQ23 200W CNC ROUTER TESTED WORKING
Item: SERVOPACK. SERVO MOTOR Manufacturer: MITSUBISHI Country Of Origin: Japan-TESTED- FREE SHPPING FEE. CONDITION- TAKEN FROM A WORKING EQUIPMENT-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
Hardinge Cobra 42 CNC lathe w/ chuck, collets, and tooling
This machine is located in Forristell MO. I can not figure out how to get that changed in my listing. The only thing wrong with it is that the tool changer does not index. It was sold to me as a machine in working condition. But it was not. I replaced the spindle bearings and have broken them in. The spindle will need to be aligned by the buyer. The machine came to me without parameters. I have files for them, but do not have a computer that I am able to link to the control to load them. I entered all of the parameters manually, and I have been able to get all of the functions to work except the tool changer. The spindle turns on and off correctly, the parts catcher works and the machine will move in both handle and automatic mode. The tail stock ram also moves correctly. I sent the tool changer servo to be tested and it works properly. I ... morealso had a fanuc tech check out the drive and he said that it is working properly, so all of the hardware for the tool changer seems to be functional. This machine also includes a cabinet full of collets and a 6" chuck with some jaws. I would estimate that there are more than 100 collets and at least 20-30 collet stops. This machine has the collet nose built into the spindle and the draw bar screws directly into the back of the collet. No collet chuck or adapter is needed. All of the work holding will come in a cabinet that is included. There are also tool holders for each station on the turret and several turning tools of different types. I have all of the manuals, and both a hard copy and digital copy of all of the parameters from hardinge. If you have any questions please email me to set up a time for a phone call. I also have many more pictures that can be sent to anyone that is interested. This item must be picked up by the buyer. Location is Foristell MO 63348 Posted with
|
|
|
High speed Optocoupler ! 4 axis CNC controller TB6560 stepper motor driver board
Features: 1. 4-wire 0-3.5A normally 3A. The 3.5A is the peak currentcan be regulated rate current output, bipolar stepper motor driver. 2. Standard parallel port. Supports Mach2/3,EMC2, KCAM 4 etc. 3. Optical isolated(IO) and DCDC power isolated to protect the PC parallel port and other equipments. 4. Limit and emergency stop port( standard DB9 port) 5. 4 working modes: mixed mode. Fast mode, slow mode, standard mode 4-microstep: 1 1/2 1/4 1/16. 6. 12-36V single power input uses the switch power chip as the 5V power supply. Stable and low heat. 7. Adopts RC + 7414 auto semi-flow. 8. The relay output can control the main axis. 9. 5th axis extension control port. P ackage include: 1 x 4axis TB6560 Stepper Motor Driver board High speed Optocoupler! 1 x DB25 parallel cable 4 axis CNC controller TB6560 stepper motor driver board Products Features: ... moreThe advantages of the TB6560AHQ chip The vibration of the motor is small and low noise: because of the 2/8/16 resolution can satisfy the different speed. Flush type low heat The area of the chip can support itself to cool when the current is low Supports a lot of stepper motors The advantages in the high-speed running condition
|
|
|
Clausing Kondia with Southwestern Industries MX 2 CNC Mill
We are pleased to quote the following for your consideration: q One(1) Used- CLAUSING/KONDIA Model FV1-48VS08 Vertical Knee Type Milling Machine With Proto Trak MX 2 CNC Control Serial Number Y 984 INV. 02721 SPECIFICATIONS: § 9” X 48” Table § 36” Longitudinal Travel § 15” Cross Travel § 16-1/2” Vertical Traverse § 23” RAM § Infinitely Variable Spindle Speed- 60-4000 RPM § Net Weight– 3040 lbs. § R-8 Spindle Taper Equipped With: SWI Proto Trak MX-2 CNC Control Kurt Power Draw Bar Riser Block Power Knee Feed Splash/Chip Guards Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Mori Seiki TL 3/5 CNC Lathe Toolholder & Boring Bar Holders-12 in stock
We are selling 12 different pcs of Mori Seiki(11) Boring Bars and(1) Stick Toolholder shown in the attached pictures for $250.00 ea. with your choice of size. Type, and quantity. The boring bar holders size and quantity are as follows: 1) 1 3/4" Dia, 4) 2" Dia. 3) 1 1/2" Dia. 3) 1 1/4" Dia. and(1) O.D. or Face Stick Toolholder. They are used and have dents and scratches and may be missing a set screw. Otherwise they are in good working condition. Free Shipping within the lower 48 states.
|
|
|
74 Pcs. High Speed Balanced BT 40 CNC Tooling Kit
74 Pcs. High Speed Balanced BT 40 CNC Tooling Kit Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best end mill holders on the market. CAT 40& CAT 50 are production balanced to G6.3@ 12.500 RPM AT 3 taper or better ID hole tolerance = H5 to decrease TIR and reduce tooling cost. Best in industry! Kit Includes: Description Part No. CNC Code 1 Pc. BT 40 1/4" 2-1/2" Standard Length End Mill Adaptor, 07140-1/4, BT40 1/4R, 1 ... morePc. BT 40 5/16" 2-1/2" Standard Length End Mill Adaptor, 07140-5/16, BT40 5/16R, 1 Pc. BT 40 3/8" 2-1/2" Standard Length End Mill Adaptor, 07140-3/8, BT40 3/8R, 1 Pc. BT 40 1/2" 2-1/2" Standard Length End Mill Adaptor, 07140-1/2, BT40 1/2R, 1 Pc. BT 40 5/8" 2-1/2" Standard Length End Mill Adaptor, 07140-5/8, BT40 5/8R, 1 Pc. BT 40 3/4"2-1/2" Standard Length End Mill Adaptor, 07140-3/4, BT40 3/4R, 1 Pc. BT 40 1"3.563" Standard Length End Mill Adaptor, 07140-1, BT40 1.0R, 1 Pc. BT 40 1-1/4"3.563" Standard Length End Mill Adaptor, 07140-1-1/4, BT40 1.25R, 1 Pc. BT 40 1-1/2"3-9/16" Standard Length End Mill Adaptor, 07140-1-1/2, BT40 1.50R, 1 Pc. BT 40 High Speed Balanced upto 25.000 RPM ER 16 x 70mm collet chuck. Rated the best collet chuck on the market. Balanced to 25.000 RPM@ G2.5 0.0001" runout from shank to collet pocket. Insepection report inclued with each holder detailing accuracy& balance. Technical Specification: Part No. Description L1 D Collet Max. Shank T Wrench 06151, BT 40 x ER 16-70mm, 70mm, 1.26" ER16.406" M10 x 1.5, 04609 hex, 06151, BT40-ER16, 10 Pcs. ER 16 Collet Se
|
|
|
59 Pcs. High Speed Balanced BT 40 CNC Kit -TECHNIKS
59 Pcs. High Speed Balanced BT 40 CNC Kit-TECHNIKS Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best end mill holders on the market. CAT 40& CAT 50 are production balanced to G6.3@ 12.500 RPM AT 3 taper or better ID hole tolerance = H5 to decrease TIR and reduce tooling cost. Best in industry! Kit Includes: Description Part No. CNC Code 1 Pc. BT 40 1/4" 2-1/2" Standard Length End Mill Adaptor, 07140-1/4, BT40 1/4R, ... more1 Pc. BT 40 5/16" 2-1/2" Standard Length End Mill Adaptor, 07140-5/16, BT40 5/16R, 1 Pc. BT 40 3/8" 2-1/2" Standard Length End Mill Adaptor, 07140-3/8, BT40 3/8R, 1 Pc. BT 40 1/2" 2-1/2" Standard Length End Mill Adaptor, 07140-1/2, BT40 1/2R, 1 Pc. BT 40 5/8" 2-1/2" Standard Length End Mill Adaptor, 07140-5/8, BT40 5/8R, 1 Pc. BT 40 3/4"2-1/2" Standard Length End Mill Adaptor, 07140-3/4, BT40 3/4R, 1 Pc. BT 40 1"3.563" Standard Length End Mill Adaptor, 07140-1, BT40 1.0R, 1 Pc. BT 40 1-1/4"3.563" Standard Length End Mill Adaptor, 07140-1-1/4, BT40 1.25R, 1 Pc. BT 40 1-1/2"3-9/16" Standard Length End Mill Adaptor, 07140-1-1/2, BT40 1.50R, 1 Pc. BT 40 High Speed Balanced upto 25.000 RPM ER 16 x 70mm collet chuck. Rated the best collet chuck on the market. Balanced to 25.000 RPM@ G2.5 0.0001" runout from shank to collet pocket. Insepection report inclued with each holder detailing accuracy& balance. Technical Specification: Part No. Description L1 D Collet Max. Shank T Wrench 06151, BT 40 x ER 16-70mm, 70mm, 1.26" ER16.406" M10 x 1.5, 04609 hex, 06151, BT40-ER16, 10 Pcs. ER 16 Collet S
|
|
|
FAULHABER MINIMOTOR 3557K024C R 717403 REV AF 24VDC 30/1 3.71:1 110422 CNC
FAULHABER MINIMOTOR 3557K024C R 717403 REV AF 24VDC 30/1 3.71:1 110422 CNC GUARANTEED TO WORK OR YOUR MONEY BACK! UP FOR SALE IS A FAULHABER MINIMOTOR 3557K024C R 717403 REV AF 24VDC 30/1 3.71:1 110422. PLEASE VIEW THE PICTURES BELOW TO SEE THE ACTUAL ITEM/S YOU ARE BUYING. ONLY WHAT IS PICTURED IS INCLUDED. IF IT IS NOT PICTURED. IT IS NOT INCLUDED. Please view Our eBay auctions for plenty more equipment. Save on Shipping Local pickups are free and welcome! International Buyers We may allow international purchases for certain items Buying Terms: Do not assume anything. If the description is not clear enough. Please let us know. Please ask any questions you may have BEFORE buying. On rare occasions we reserve the right to substitute an equivalent item(same exact model) instead of the actual one pictured. Guarantee Terms: This item is guaranteed. ... moreIf it does not perform as described above. You may qualify for a refund. In such a case, you must contact us within 5 days of delivery. Return shipping is at the buyer's cost and is the buyer's responsibility. Return Policy: Read the description and view the pictures thoroughly. If anything is unclear. Simply email us and ask questions before buying. If you purchase an item in error, you may return it provided you contact us within 5 days of delivery. You will be refunded the purchase amount, less a 10% restocking fee. We cannot refund shipping due to customer error. Payment Terms: Payment is due within 7 days. If paying with PayPal. Your order must ship to the exact address on your payment. Shipping Terms: Shipping quoted is for shipping and handling in the Continental U.S. only(excludes Alaska and Hawaii) Most Orders will ship via FedEx. Some times we use other methods such as USPS. Only orders totaling $250 or more will require signature upon delivery. Most items ship within 2 business days. Local pickups at our Maryland facility are more than welcome. International Buyers: We may allow international purchases for certain items.
|
|
|
FAULHABER MINIMOTOR 3557K024C MOTOR & AVAGO HEDS-5500 A06 30/1 3.71:1 110422 CNC
FAULHABER MINIMOTOR 3557K024C MOTOR& AVAGO HEDS-5500 A06 30/1 3.71:1 110422 CNC GUARANTEED TO WORK OR YOUR MONEY BACK! UP FOR SALE IS A FAULHABER MINIMOTOR 3557K024C MOTOR WITH AVAGO HEDS-5500 A06 30/1 3.71:1 110422. PLEASE VIEW THE PICTURES BELOW TO SEE THE ACTUAL ITEM/S YOU ARE BUYING. ONLY WHAT IS PICTURED IS INCLUDED. IF IT IS NOT PICTURED. IT IS NOT INCLUDED. Please view Our eBay auctions for plenty more equipment. Save on Shipping Local pickups are free and welcome! International Buyers We may allow international purchases for certain items Buying Terms: Do not assume anything. If the description is not clear enough. Please let us know. Please ask any questions you may have BEFORE buying. On rare occasions we reserve the right to substitute an equivalent item(same exact model) instead of the actual one pictured. Guarantee Terms: ... moreThis item is guaranteed. If it does not perform as described above. You may qualify for a refund. In such a case, you must contact us within 5 days of delivery. Return shipping is at the buyer's cost and is the buyer's responsibility. Return Policy: Read the description and view the pictures thoroughly. If anything is unclear. Simply email us and ask questions before buying. If you purchase an item in error, you may return it provided you contact us within 5 days of delivery. You will be refunded the purchase amount, less a 10% restocking fee. We cannot refund shipping due to customer error. Payment Terms: Payment is due within 7 days. If paying with PayPal. Your order must ship to the exact address on your payment. Shipping Terms: Shipping quoted is for shipping and handling in the Continental U.S. only(excludes Alaska and Hawaii) Most Orders will ship via FedEx. Some times we use other methods such as USPS. Only orders totaling $250 or more will require signature upon delivery. Most items ship within 2 business days. Local pickups at our Maryland facility are more than welcome. International Buyers: We may allow international purchases for
|
|
|
Vortech 4'x8' CNC Router Engraver Mill
Vortech 4'x8' CNC Router with Vacuum Table and Pump-Brand New Stepper Motors and Drivers. Rack and Pinion Drive on XY. Ball Screw on Z. 3HP Perske Air Cooled Spindle(18.000 RPM) Frequency Drive for Spindle. 10HP Vacuum Pump. Computer and Mach 3 Included. Local Pickup or Buyer Pays Shipping. A video of this machine can be found at the following link. Please contact me if you would like to make an offer. Or if you have any questions.
|
|
|
SHERLINE LATHE CNC MILL MILLING KIT
LOTS OF AUCTIONS ONLINE NOW! Brand Sherline Packaging None Condition Excellent Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
BT-40 CNC MACHINING CENTER TOOLHOLDER FOR 1-1/4" END MILL FROM COMMAND #6
This auction is for one BT-40 toolholder. It is a 1-1/4" end mill holder from Command with Command number B4E4-1250. The toolholder is in good used condition. All shipping is by USPS Medium Flat Rate Box. Shipping to US addresses is $12.35. Use the shipping calculator for all international addresses. I have multiple tool holders up for auction. I will ship up to five BT40 tool holders for this one shipping charge. If you purchase any of my listings. I will combine shipping on any of my listings. If you use Buy-It-Now you can buy the items without paying for them immediately. When you are done shopping, commit to buy the items but don’t pay for them. Then request a total invoice. I will adjust the shipping charges and send out an invoice. The same applies when you win the auction for multiple items. Ask for an invoice rather than pay ... moreright away. I will adjust the shipping charges and send out an invoice. See my listings for: Sunnen hone tooling; Hardinge lathe parts& tooling; other machine shop tooling; marine& outboard motor parts and manuals; Muskie fishing lures; Famous Monsters of Filmland magazines from the 1970s’ National Lampoon magazines from the 1970’s. Mad Magazines and paperback books from the 60’s&b 70’s and other items. Please allow 2 days for me to respond to any questions. See my guarantee information and return policy below. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
5 CNC Router Bits, Onsrud Cutter 60-250, Carbide Square Nose End Mill, Inch
ONSRUD 60-250 Rout End Mill. Down Low Helix, 1/2, 3 1/2 4WAC9. More details: Routing End Mill, Downcut Low Helix Finisher, High Performance, Number Of Flutes 3, Single End, Plunge Point End Style, Center Cutting Type, Right Hand Cut, Carbide, Uncoated Finish, Dia 1/2 In, Shank Dia 1/2 In, Length Of Cut 1 1/8 In, Overall Length 3 1/2 In, Cut Angle 10 Deg, Helix Angle 10 Deg, For Natural Wood, Hard Plastic, Composite Plastic, And Solid Surface. May need sharpening ITEM SOLD AS IS. NO RETURNS International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these add,
|
|
|
Azonic Shorty Stem CNC-Machined VRC Black 105mm x 5 degree rise
This is a Azonic Shorty Stem CNC-Machined VRC Black 105mm x 5 degree rise for 1 1/8 threadless forks. It has a few light scratches on it and the faceplate bolts have a little surface rust on the head(they screw in and out just fine) It is rare that you see one of these stems in a more normal length like this one! This thing was originally machined out of a solid piece of aluminum. Pretty cool! I am happy to ship international.
|
|
|
CNC REGRIND REGAL BELOIT END MILL 1" (.993) X 8-5/8" OAL X 6-1/8" LOC 4 FL 1343
YOU ARE BIDDING ON ONE CNC REGRIND REGAL BELOIT END MILL 1" 993) X 8-5/8" OAL X 6-1/8" LOC 4 FLUTE M7 HSS USA NON CENTER CUT DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
OKUMA LB15 2 AXIS CNC TURNING CENTER S/N 5905-1297 YEAR 1984
Details Machine type CNC Lathe Make Okuma Model LB15 Serial Number 5905-1279 Control OSP-5020 Control with IGF Location USA Technical details Swing over bed: 15.75" Max. Turning diameter: 9.84 Max. Work Lenght 19.69" Z axis stroke: 20.47" X axis stroke: 6.89" Spindle bore: 2.2" Spindle Nose: A2-6 Spindle Speed: 75 to 4.200 RPM Type of Turret: V12 Tailstock Quill diameter: 3.54" Main Motor: 10/15 HP Rapid Traverse rate: 472 IPM Approximate Floor space: 73" X 108" includes all manuals. Tooling, and original tape
|
|
|
Fanuc GN6 CNC Controller Cabinet A61L-0001-0076
This Fanuc GN6 controller was removed from another factory and was fully operational when we took possession. Shipping is freight at buyers expense. Payment shall be through PayPal or Cash if item is being picked up locally.
|
|
|
KROSSGRINDING/ SUNNEN #CGM-1000-P CNC HONE - Age: 1996 - #2
SUNNEN KROSSGRINDING#CGM-1000-P CNC HONE EQUIPPED WITH: SERIAL: 4U1-1020- AGE: 1996- 215" 1.260" 250- 3700 RPM- STROKE RATE: 33-500- MAX PART WEIGHT- 4.5LBS- TOUCH SCREEN CONTROLS- WGT: PRICE: FOB BROOK PARK. OH- $ 7,950.00 SUBJECT TO PRIOR SALE BT 7851 FOR ADDITIONAL INFORMATION OR QUESTIONS PLEASE CONTACT DE MAXWELL OR JOHN AT: 216-761-7011 McKean Machinery Sales 5372 W. 130th Brook Park. OH 44142 sales@mckeanmachinery.com
|
|
|
SMC Guided Cylinder CXSL10-20 CXSL10-20 Slide Bearing CNC Pneumatic Air Dual Rod
SMC Slide CXSL10-20 Used and in good working order Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
SMC MXS Guided Cylinder MXS8-10 MXS810 Slide Bearing CNC Pneumatic Air Switches
SMC Slide MXS8-10 Includes Slide and 2 D-F9N Switches Used and in good working order Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
FANUC A02B-0059-0032 CNC MDI/CRT OPERATOR INTERFACE PANEL, SYSTEM 6T
Inventory Number: 04131240036 Manufacturer: Description: FANUC A02B-0059-0032 CNC MDI/CRT OPERATOR INTERFACE PANEL. SYSTEM 6T Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, FEW OF THE INPUT BUTTONS ARE BROKEN- SEE PICTURES, REMOVED FROM A WORKING ENVIRONMENT, WIRES CUT FROM REMOVAL. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify ... moreus at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple q
|
|
|
FADAL VMC-4020 CNC WITH 4TH AXIS VERTICAL MACHINING CENTER
` QUALITY NEW AND USED CNC AND MANUAL MACHINERY INCLUDING MILLS AND LATHES. CENTROID, ANILAM, FANUC, CHECK US OUT FOR TOOLS AND SUPPLIES CHARNEY MACHINE& TOOL. INC 160 84th STREET SW BYRON CENTER. MI 49315 616-455-3800 Fadal VMC 4020 CNC 88 Control With SMW MODEL ET 315(5) DEGREE INDEX TABLE 12" DIA. WITH TAIL STOCK AND T-SLOTTED FIXTURE TABLE TRUNION STYLE Vertical Machining Center Our Stock Number 1327-071513 Machine Description FADAL 4020 VERTICAL MACHINING CENTER and SMW MODEL ET 315 4th Axis Year: 1990 Specifications: are accurate to the best of our knowledge) CONTROL TYPE. FADAL 88 TABLE SIZE. 47.9" X 20" X) 40" Y) 20" Z) 28" SPINDLE SPEEDS. 10.000 RPM SPINDLE DRIVE. 15 HP SPINDLE TAPER. CAT 40 TOOL CHANGER. 21 ATC EQUIPPED WITH: SMW MODEL ET 315(5) DEGREE INDEX TABLE 12" DIA. WITH TAILSTOCK AND ... moreT-SLOTTED FIXTURE TABLE TRUNION STYLE FADAL FACTORY CHIP CONVEYOR MACHINE MANUALS COOLANT TANK AND PUMP This machine is in very good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& MasterCard accepted thru PayPal only. Personal check
|
|
|
CONTR TELET MOD-C 34334 D 15438 MODULE CNC PHILIPS ID2972
RGB ELEKTRONIKA AGACIAK CIACIEK SPÓLKA JAWNA ul. Jana Dlugosza 2-6 51-162 Wroclaw POLAND Tel. +48 667 869 537 Email: biuro@rgbelektronika.pl Skype: campio Account number/ Kontonummer: EUR: PL70 1750 1064 0000 0000 1362 5848 USD: PL20 1750 1064 0000 0000 2051 6755 Other payment methods/ Andere Zahlungsweisen ABB. Actimax, Apator Control, Berges, Bonfiglioli, Control Techniques, Danfoss, Elettronica Santerno, Enel, Eurotherm Drives, Fuji Electric, GE Power Protection, IMO, Invertek Drives, KEB, Lenze, LG Industrial Systems, Long Shenq Electronic, Lust, Mitsubishi, Moeller Electric, NAIS, Nord, OBRUSN, Omron, PDL Electronics,pDRIVE, Rockwell Automation, Schneider Electric, SEW Eurodrive, SIEI, Siemens, Stöber, Teco(Taian) Tek Drive, Toshiba, Toyo Denki, Twerd, Vacon, Watt Drive, Yaskawa and many more. Product name/Produktname CONTR ... moreTELET MOD-C 34334 D 15438 MODULE CNC PHILIPS ID2972 Click to see supersized image Click to see supersized image Click to see supersized image
|
|
|
#250MB DAEWOO Puma 22.4" x 25.6"cc Three-Axis CNC Lathe with Milling (New 2000)
Preowned DAEWOO Three-Axis CNC Turning Center With Milling. Model: Puma 250MB, S/N: P25M0174(New 2000) Swing over bed Swing over saddle Recommended turning diameter Maximum turning diameter Maximum turning length Draw tube diameter Spindle bore Spindle nose Spindle speed range Rotary tool speed range Minimum spindle indexing angle(C-axis) X-axis travel Z-axis travel Number of tools on turret X-axis rapid feed rate Z-axis rapid feed rate Tailstock quill diameter Tailstock spindle taper Tailstock stroke 22.44" 14.57" 10" 13.97" 25.6" 3.03" 3.54" A2-8 35-3.500 R.P.M. 40-4.000 R.P.M. 001° 11.10" 26.77" 12 787 I.P.M. 945 I.P.M. 3.94" MT#5 3.94" Equipped With Solid box way construction#18-T FANUC CNC three-axis CNC control Full C-axis Twelve station turret with milling(live tool stations) ... more10" Diameter three-jaw chuck Tailstock Built-in tool presetter Parts catcher Chip conveyor Oil mist collector Coolant system 15/18.5 H.P. Continuous Duty/30 Minute) AC spindle drive motor and electrical controls Approximate Floor Space Required(Machine Only) 135" x 71" x 72" Ex-Site Bloomfield. CT)
|
|
|
GE Fanuc IC670PBI001-CG Profibus Bus Interface Plc Cnc Mill Lathe Robot
This auction is for one GE Fanuc IC670PBI001-CG profibus bus interface unit from a working GE fanuc PLC system. Modules were removed to change machine over to another PLC system. More modules like this and other types are available in my other auctions. Thank you.
|
|
|
Allen Bradley CNC Analog Card 636058-01
Allen Bradley CNC Analog Card pic: 11804 loc: FR bin TR8 Model: 636058-01, Used. In great condition. FREE SHIPPING! AK. HI, PR: Free shipping for items via the Post Office. BUT, buyer pays actual shipping cost for items sent via UPS or Fed Ex. International bidders pay actual shipping charge(via the US Post Office) Payment: Paypal If you are the buyer of this item. Payment is expected within a five day period after purchase. If you are not able to send payment within this time frame, please contact me to make other arrangements, I am flexible. Warranty: All items are warrantied against D.O.A. it will work when it arrives) I have made an honest and fair evaluation of this item. But I am only human. I do miss things occasionally, and if it is not as I have represented it, I certainly will do what I can to"make it right" Returns: I ... moreaccept returns only for items under warranty. This means no returns for purchasing the incorrect item. Customer order changes, etc. Questions? 616-292-5579
|
|
|
Lot of CNC Hold Down Clamps
Lot of CNC Hold Down Clamps You are bidding on a lot of CNC hold down clamps. What you see in the photos is what you are bidding on Note: The eBay"Item Specifics" Detailed Item Info" are not always correct. To anyone who purchases from me. The Item specs above is the correct info! If it is not stated in the listing or pictured it is not included. Note: I only sell items for an IT client. I am not a IT tech and do not provide tech support. It is up to you to research to see if this software or hardware will work for your application. NO CANADA or Puerto Rico. NO INTERNATIONAL SHIPPING. PLEASE DO NOT ASK! A ll shipping costs set by E Bay through the shipping calulator and are based on the destination. Size and weight of the item! The shipping costs are non- negotiable Payment options When the auction closes. I will invoice you ... morefor the purchase. You have five(5) business days from the date of auction closing to pay for your item. If you have a question about an item. Shipping or payment terms, please contact us through Ebay. If we have not received payment or received communication from the buyer within five(5) days of auction closing. We will consider the buyer a non-paying bidder be reported to E Bay as a nonpaying bidder and the relist the item. Our preferred method of payment is Paypal. Warranty/ Returns/Refunds I offer a(5) day DOA warranty with your purchases unless listed"As-Is" You have five(5) days upon arrival of your item to return to us for a full refund minus shipping costs. The customer pays the return shipping and when the item is returned a refund of the cost of the item will be refunded and not the initial shipping cost to the customer. Shipping Information The E Bay shipping calculator calculates the shipping costs based on destination. Size and weight. The shipping costs are non- negotiable and non– refundable. If a item is damaged during shipping. Please inform me immediately and I will file a damage claim with the shipper. If you are local. In the Milwaukee, Racine or Ke
|
|
|
CNC / CAD CMM Model 250 CNC router machine
GREAT PRICE ON A GREAT MACHINE For Sale is a CMM Model 250. It is a single bay router system that utilizes a monitor. Flat keyboard, and user friendly interface software. This model features: Self Centering Clamps 15"second speed Servo Control System Custom Software CNC Control w/ DNC Capability Linear and Circular Interpolation Commercial Grade Computer. User Friendly Software. Advantages: Automatic Homing High Speed Motion Control Four Part Programming Automatic Calculation for Stair. Slope, and Standard Railing Writes Complete NEW Part Program. Less than one minute Designed and Built for HEAVY Industrial Use. Was formerly used in routing vinyl fencing materials. Buyer will be responsible for shipping as cost may vary greatly by location. Dimensions of machine are approximately 132 inches x 55 inches x 64 inches and around 600 lbs.
|
|
|
Desk Top CNC Router
I purchased this kit off of eBay 6 months ago. It is fully assembled. And wired. When the kit was bought I had to research how to wire the stepper motors and boards. Every thing came in Asian text. I also added a few pieces that they didn't tell you about when you purchase the kit. Here is what the unit consists of. 3 stepper motors 1.8 step 1.53 amp, 12 volt spindle motor( I have not hooked it up or tested it) the machine itself is assembled, and the stepper motors are wire to their specific axis point. Now I added a 24 volt dc 8.8 amp power supply( this is the correct one for this machine) I purchased a spindle control board that will power on and of the spindle and one other access point if needed. That is why the spindle was never hooked up or tested.The computer is a dell optiplex gx 240 windows XP w/ a hp 15" flat screen monitor. ... moreAll of the cables from the computer to the machine are included, the Manuel drive controller is included. All you will need is an operating program for the machine. I recommend Step 3. It is more user friendly then Mach1. The product will be shipped in two separate packages. It was a great little project but I am currently building a much larger machine. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13fe7f139c3-0x101-
|
|
|
SSD TECHNOLOGIES CNC ROUTER VRC1000X2
TRANSLATE Arabic Chinese French German Greek Indonesian Italian Hindi Japanese Korean Swedish Portuguese Russian Spanish SSD TECHNOLOGIES CNC ROUTER VRC1000X2. INCLUDES EVERYTHING PICTURED AND MORE(RAN OUT OF PICTURE LIMIT) MACHINE CURRENTLY USED FOR ROUTING HOLES IN VINYL FENCE POSTS. HAS 2 ROUTERS. IN VERY GOOD CONDITION. FOR MORE PICTURES PLEASE MESSAGE ME. BUYER WILL NEED TO PROVIDE SHIPPING. HAS MANUALS. THIS CNC ROUTER RETAILS FROM MANUFACTURER AT $45000. ANY INTERESTED PARTY CAN VIEW IN FLINT MI. JUST CONTACT ME TO SCHEDULE VIEWING. ANY QUESTIONS PLEASE CONTACT ME VERY HAPPY TO HELP AND GIVE ANY INFORMATION. THANKS FOR LOOKING!
|
|
|
Sandvik cnc indexable tool holder 1" shank DDJNL 16 4C WITH CARBIDE INSERT
Sandvik cnc indexable tool holder 1" shank DDJNL 16 4C WITH CARBIDE INSERT No combined shipping& handling charges
|
|
|
cnc lathe indexable tool holder NC2 WWLNL-164 1" SQ shank with carbide insert
cnc lathe indexable tool holder NC2 WWLNL-164 1" SQ shank with carbide insert No combined shipping
|
|
|
cnc lathe indexable tool holder ND9 WWLNL-164 1" shank with carbide insert
cnc lathe indexable tool holder ND9 WWLNL-164 1" shank with carbide insert No combined shipping
|
|
|
Southwestern industries DPM AGE 3 3 Axis CNC Mill
Really clean DPM Age 3 3 axis cnc mill. Runs great. Vise not included. Call for freight. Or see under power in Tulsa. I can load. Sold As Is Where Is. 918-894-8001. Year: 1998 Specifications: Table Size: 10" x 50" Table Load Capacity 1.760 lbs X-Axis: 31" Y-Axis: 17" Z-Axis: 25" Dist.Spindle Center to Column Face: 17.3" Head Swivel Left and Right: 90 Degrees Quill Feeds(3) 002/004/006 IPR Quill Travel: 5" Spindle Motor: 3 HP Spindle Speeds: 70- 4.200 RPM Spindle Taper: 40 NST Machine Dimensions 70" x 72" x 89" Machine Weight 4.000 Lbs Equipped With: AGE 3 CNC Control Power Drawbar Machine vise Misc. spindle tooling assortment Posted with
|
|
|
CINCINNATI MILACRON HAWK 250 CNC LATHE
Untitled Document CONDITION: MINT. 1998. Maximum Swing: 20.86" Maximum Cutting Length: 27.16" Distance Between Centers: 53" Bar Capacity: 3" Spindle Nose: A2-8 Number of Spindles: 1 Spindle Speed(s) 3300 RPM Max. Number of Turrets: 1 Total Tool Positions: 12 X-Axis Travel: 10.6" Z-Axis Travel: 27.16" Rapid Traverse(X) 629 IPM Rapid Traverse(Z) 944.8 IPM SERIAL NUMBER: 7060 A00 98 0060. EQUIPPED WITH: Manual Acramatic A2100E 10" 3-Jaw Hydraulic Chuck 20 HP Main Motor Tool Pre-setter Hydraulic Tailstock Coolant Chip Conveyor PAYMENT Payment must be made with money order. Cashier check, business check or personal check, we glady accept pay-pal. all payments must be received by NS Manufacturing within 7 days. payments must be send to NS Manufacturing 825 WESTERN AVE. UNIT 13. GLENDALE. CA 91201. For faster release ... morethe equipment. Payments must be made by next business day in order for us to process and verify the funds. before sending the payment please contact us by email address: saro_pgt@yahoo.com SHIPPING. LOCAL PICK UP.
|
|
|
Magnum Vectrum 5000 punch and die holders for turret style 114 50 stations cnc
Magnum/Vectrum 5000 50 station punch/die holders style 114 Part Number(38) VA4B5V2250 B-Station Punch holder(6) VA4C5V3125 C-Station Punch holder(2) VA4D5V3375 D-Station Punch holder(2) VA4F5V4562 E/F Station Punch holder(2) VA4L5M6750 K/L Station Punch holder(21) MA4B5M3125 B Station Die Holder(6) MA4C5M3937 C Station Die Holder(2) MA4D5M4687 D Station Die Holder(2) MA4F5M5580 F Station Die Holder(2) MA4J5M10750 J Station Die Holder Condition USED Description LOT of style 114 punch and die holders from a Vectrum 5000 turret Returns If on a rare occasion an item is DOA. Please contact us and we will work it out and refund when appropriate within 14 days. Shipping Please call before buying to arrange for freight payment. Feedback We leave positive feedback when payment is received. Please return the favor if you have a good experience. If ... morethere is a problem please contact us to have it fixed! About Us AMI is the leading independent provider of service. Parts, retrofits and maintenance programs for turret punch presses, press brakes and other CNC sheet metal forming equipment. Service. Project Services, Parts and Control Retrofits for CNC Precision Fabricating Equipment Contact Us Call us at 513-965-6468 or message me through ebay Store Link Check out my! Be sure to add me to your! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13fea1e6b18-0xff-
|
|
|
MINITECH CNC DRIVE 3 AXIS STEPPER WITH EXTRA PARTS
MINITECH CNC DRIVE 3 AXIS STEPPER WITH EXTRA PARTS, WAS USED FOR 300-450 IN OZ MOTORS ON MINI MILLS AND LATHES. COMES WITH 2 EXTRA CIRCUIT BOARDS THESE CAN BE USED AS PARTS OR REPAIRED AND COPY THE OTHER DRIVE TO BUILD OTHER DRIVES FOR OTHER MACHINES REPAIRS LOOK MINOR
|
|
|
BEAUTIFUL!! KURT 6" DOUBLE LOCK CNC VISE - #DL640
aims BEAUTIFUL! KURT 6" DOUBLE LOCK CNC VISE- DL640 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Kurt Manufacturing Company of Minneapolis. Mn. This is a Kurt Double Lock CNC Vise in EXCELLENT condition. Model# DL640 Serial# 2737 Features: DoubleLock vises offer cost saving productivity by maximizing the number of parts in the work envelope. Productivity- multiple part workholding for better spindle utilization. Reduced tool change time, and reduced machine travel from part to part. Durability- 80.000-PSI ductile iron body and steel components provide strength, rigidity and long term accuracy while absorbing machining vibration. Accuracy- repeatable clamping to.0002" Self-adjusting over the entire clamping range. Preload is adjustable from.010" to.150" ... moreKurt Torque Handle. Specifications: Jaw Width: 6" Jaw Height: 1-3/4" Jaw Openings: 4" Overall Dimensions 25-1/2" x 6" x 5" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. BEAUTIFUL! KURT 6" DOUBLE LOCK CNC VISE- DL640 BEAUTIFUL! KURT 6" DOUBLE LOCK CNC VISE- DL640 BEAUTIFUL! KURT 6" DOUBLE LOCK CNC VISE- DL640 BEAUTIFUL! KURT 6" DOUBLE LOCK CNC VISE- DL640 BEAUTIFUL! KURT 6" DOUBLE LOCK CNC VISE- DL640 BEAUTIFUL! KURT 6" DOUBLE LOCK CNC VISE- DL640 Reliable Tool Inc. c 2011 | Powered by
|
|
|
MAZAK NACHI ST28/35N CNC LATHE VDI 50 LIVE TOOL HOLDER 51718006202
MAZAK RADIAL LIVE TOOL HOLDER VDI 50 SHANK USES ER32 COLLETS. Good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, credit card, and PayPal accepted. FREE USPS Priority Mail shipping with signature confirmation* If you have any questions regarding this item. Please give us a call at 440-343-4419 and we will be happy to assist you. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13fea9c2dc6-0xf3-
|
|
|
Bosch Alpha2 CNC control
The equipment was dismountled from a working lathe. Fuly tested. Works great. Battery exchanged. All the parameters saved in a PC file format. We developed a software you can use it to easely transfer files to the controller via RS232 port. We also have the conversational G-code generator for lathe(German version) It is listed separately. The shipping fees listed are just orientative. It could be different for your location. The buyer is responsible for choosing the shipping services. You could find a better shipping method and/or service. All the shipping fees are on the buyer's site. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13feac8af94-0xf7-
|
|
|
Festo Component Parts for Bander - IMA(ИМА) - CNC BIMA - Edgebanding-Automation
I believe this to be a component or rather a collection of components that connect into a Bima Bander/Edgebander. I have tried to show everything possible. If you have any info about this unit. I would appreciate all you wish to share. If you can suggest any tests, I am willing to try. I will admit that my listing price is probably unreasonable but I can find no real information. Please tell me what it is worth and what you are willing to pay. I will work with you. Please note: We do not sell to buyers outside of the United States of America. Too many times now. I have had to cancel and petition ebay for a return of the Final Value Fee. If for some reason you think you should be an exception to this rule, please email me to discuss. Second note: Ebay has an annoying habit of saying"Free Local Pickup" This has caused confusion with ... moremany people seeing only the"free" and not the local pickup. This item must either be picked up from our warehouse. Located in Lakeview, Michigan 48850, or shipped to your address. We will assist you if you need to find a shipper because you can't get to Michigan, but we should do this prior to your purchasing the item. Shipping is not Free and the cost of Freight is the buyer's expense. Pallet Racking: Beams. Frames, decking, and uprights are all available. New and Used, in stock. Planning your next storage project. Call us and have our design consultants help you configure your storage solution. Call direct for a quote: 616-255-1837(ask for Dave. We purchase Commercial and Industrial Close outs and Liquidations.
|
|
|
JORGENSON 9'6" power chip conveyer CNC material handling recycling NEW 1997
BOXED ITEM Jorgenson chip conveyer s/n M-971572-4 New 4/1997 9'6" bed length 11" chain width 51" discharge ht overall 168"x32"x63" 850# shipped shrunk wrapped ready to ship info here: Chip removal conveyor systems for metal cutting machine tools can include integrated coolant tank reservoirs. Internal chip baskets and screens, pump mounting plates, pumps and complete controls. For very demanding applications where abrasive materials are being machined, or in higher production“24/7” environments, Jorgensen offers its innovative X-Treme Duty Conveyor design. Providing wear resistant features for longer reliable conveyor performance and greater return on investment. Chip and scrap removal conveyor solutions for various CNC metal cutting machine tools such as lathes. Turning centers, vertical and horizontal machining ... morecenters, drilling machines, screw machines, milling, punching, plasma cutting, laser cutting, and shearing machines, gantry/bridge mills, rotary transfer/dial machines, broaching and boring machines. Conveyor systems for handling all types and volumes of metal chips including steel. Cast iron, aluminum, brass, copper, titanium, nickel and composites. Chip conveyors sized based on material type, chip type and volume, coolant type(water soluble, semi-synthetic, synthetic, oil) and coolant flow rate. cash. Checks, mo Shipping paid by buyer. See calculator or flat rate for price. Local pick ups are fine. Item must be paid on time and removed with in ten days from payment or storage fees will apply. Domestic handling time Will usually ship within 5 business days of receiving cleared payment. Shipping insurance Optional(based on location and shipping service) Sales tax Seller charges sales tax for items shipped to: IL(8.750% Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping Any Flat rate shipping price listed is to the lower 48 states only. I will combine shipp
|
|
|
100 Ton x 10' Used Accurpress CNC Hydraulic Press Brake, Mdl. 710010
100 Ton x 10' Used Accurpress CNC Hydraulic Press Brake. Mdl. 710010, Accurpress ETS CNC Ram Control, Dual Palm Stand, Electric Foot Pedal, Tonnage Control Valve, Made In The USA! Tilt Adjustment, Includes Punch and DIe In Photo, Year(2003) A2853 NOTE: This is a USED Machine and is being sold AS-IS with NO WARRANTY. This machine will be inspected prior to shipment. Tonnage: 100, Length of Bed& Ram: 120" Distance Between Housings: 100" Ram Stroke: 0" 8" Open Height: 14" Closed Height: 6" Ram Speeds: Approach: 100 IPM, Bend: 25 IPM, Return: 220 IPM, Throat: 8" Horsepower: 10, Dimensions(L x W x H) 136" x 47" x 84" Weight: 14.000 LBS, Equipped With Accurpress ETS CNC Ram Control, Dual Palm Stand, Electric Foot Pedal, Tonnage Control Valve, Tilt Adjustment, Includes Punch and Die In Photo, ... moreMade In the USA! FREE Local Pickup and Loading from our warehouse in the Los Angeles. California area. PLEASE CALL US AT 626-444-0311 to get a shipping quote to your area if you are unable to pick this item up at our location. Buyer is responsible for all shipping charges. Including insurance, please contact us if you have any questions on this item PRIOR to bidding. Thank you! TERMS& CONDITIONS(Please read. You agree to these terms upon purchase) Payments Payments are due at the end of the auction. Any unpaid items may be offered to the next highest bidder within 4 business days. Any balance not paid in full will result in an unpaid dispute being filed with eBay after 4 business days. Wire Transfers and Direct Deposits Wire transfers are the most preferred method of payment. Please call us at 626-444-0311 for instructions. Credit Cards Due to fees charged by credit card companies to process a merchant sale. We do NOT accept credit cards for eBay purchases EXCEPT for PayPal payments.You may pay with PayPal as you normally do however we will not accept direct credit card payments via phone, etc. Cashiers Checks We accept cashiers checks and company checks. There may be a
|
|
|
400 Ton Cincinnati 400AF-12 CNC Hydraulic Press Brake
Model: 400 AF x 12 | Age: 1998 Specifications: Maximum Tonnage Capacity 450 Ton. Overall Length Of Bed& Ram 14′ Distance Between Housings 12’6″ Throat Depth 10″ Stroke Length 12″ Open Height 20″ Shut Height 8″ Main Motor(460/3/60) 2) 25 HP. Approximate Weight 56.300 Lbs EQUIPPED WITH: Cincinnati Adaptive PC Touchscreen Control(New 2010) 6-Axis CNC Back Gauge(X-40″ Precision Ram Leveling with Dual Linear Glass Scale Encoders. Electric Foot Switch& Palm Button Controls. Auto Crown” Bed Deflection Compensation Option. Requires A Pit. PRICE: $247.000.00. Location: Call for location. SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655 Ask for Joe
|
|
|
YAMAHA Actuator L870mm/ball screw/linear rail/cnc/router/pitch 20mm
AMAHA ACTUATOR 870mm Ball screw diameter: 15mm overall length of ball screw: 840mm screw length: 700 Pitch(lead) 20mm Travel: 550mm Used item in working condition and Photos show the actual items you'll receive. Thank you for visiting! i000000.
|
|
|
10" CNC Lathe Chuck Jaw T Nuts / 4 sets
12 T Nuts. Fit 10" Kitagawa and similar. Good used condition, no cracks, no damaged threads. I have 10" hard jaws listed also, I will combine for shipping. We accept Paypal. Credit cards, and cash for local pickup. We can accept your Visa or Mastercard directly over the phone, or by email or fax. No personal or company checks. Bidders outside the US or Canada must pay by paypal, credit card or wire transfer only. I will answer questions as promptly as possible during business hours. Pickups and inspections are encouraged. Domestic buyers pay only the shipping calculated by the online calculator. Foreign bidders contact us after the end of the auction for a shipping price. Sale is final. No return unless item is not as described. Buyer pays all shipping costs.
|
|
|
Weeke BHP Vantech 512 CNC Machining Center and Router Low Use Less Than 10 Hours
Weeke Vantech 512 CNC Machining Center and Router General Info: Stock# 56724 Condition: Used. Light(3 Hours of Use) Tested: Yes Brand: Weeke Model: Vantech 512 Serial: N/A Year: 2009 Weight: N/A Shipping Dimensions: N/A Specifications: Table Size 61.5" x 145.5" Matrix Table Boring Head Addition 4 Vacuum Motors WoodWop Software Package 12 HP HSK-Routing Spindle 8 Position Tool Changer 7 Spindle Drill Block Tool Length Measuring Device Dual Drive System Traverse Speed Over 3800 i/min Dust Extraction Requirements 1900 cfm Power Requirements 50 Amps at 480V(3 Phase) Air Requirements 7 Bar(100 PSI) Additional Info: This CNC was bought new for a local cabinet shop. It was used three hours and never used again. This CNC is the machining center version which includes boring head along with the spindle Seller Contact Information: Carl Davis ... more404-933-3804 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
2006 OMEC F11 TS CNC Dovetail Machine - Dovetailing Machine
Year: 2006 Make: OMEC Model: F11 TS Voltage: MULTI Location: BRANTFORD(SHOWROOM) ONTARIO CANADA Description: 2006 OMEC F11 TS CNC DOVETAIL MACHINE USED LIGHTLY FOR ONLY YEAR AND A HALF 27.5" MAX WIDTH. 59" MAX LENGTH, 2" MAX MATERIAL THICKNESS. 4HP MAIN SPINDLE 10 DIFFERENT DOVETAIL PATTERNS Call Justin 1-800-519-7147 ext. 101
|
|
|
YAMATAKE HONEYWELL 1LS1-J-PD LIMIT SWITCH 1LS1JPD OKUMA L1420 CNC LATHE
ARPI MACHINE SALES. OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 OFFICE: 818 890-7625 VERY IMPORTANT! PLEASE READ. AFTER PURCHASING THIS OR ANY OTHER ITEM FROM US. PLEASE LEAVE POSITIVE FEEDBACK AND GIVE US A 5 STAR RATING IN ALL 4 CATEGORIES. IF YOU HAVE ANY PROBLEMS WITH YOUR ORDER, PLEASE CALL US AT THE OFFICE IMMEDIATELY(BEFORE LEAVING FEEDBACK) AND WE WILL TRY TO RESOLVE ANY ISSUES YOU HAVE. FURTHERMORE, WE MARK ALL OF OUR ITEMS TO PREVENT ANY DISHONEST EBAYER FROM TRYING TO EXCHANGE OUR ITEM WITH THEIR OLD/NON WORKING ONE AND THEN ATTEMPT TO SEND BACK TO US BY CLAIMING IT AS NON WORKING IN ORDER TO RECEIVE A REFUND. THIS HAS HAPPENED SOMETIMES AND WE HAVE TAKEN SERIOUS ACTION AGAINST THESE FRAUDULENT PRACTICES IN THE PAST. THIS TYPE OF BEHAVIOR IS UNACCEPTABLE AND ACTION WILL BE TAKEN AGAINST THESE BUYERS ... moreTHRU EBAY POLICIES BY REPORTING THEM TO EBAY IMMEDIATELY. HERE AT ARPI MACHINE SALES, WE REALIZE MOST PEOPLE ARE HONEST AND DO NOT PRACTICE TECHNIQUES MENTIONED ABOVE. BY THE SAME TOKEN WE ARE COMMITTED 100% TO PROVIDE SUPERIOR CUSTOMER SERVICE TO ALL WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION SEE PICTURES BELOW WE WILL SEPARATE IF YOU SEE SOMETHING YOU WOULD LIKE TO BUY WE JUST STRIPPED A OKUMA L1420 CNC LATHE W/OSP700L CONTROL TO SEE ALL PARTS FROM THIS MACHINE PLEASE PLEASE CALL IF YOU NEED OTHER PARTS FOR IT. FREE SHIPPING BY UPS IN THE 48 STATES. INTERNATIONAL SHIPPING WILL BE $100 OKUMA L1420 PALLET 2 CALIFORNIA BUYERS TO PAY 8.75% SALES TAX SHIPPING& HANDLING: FREE SHIPPING BY UPS IN THE 48 CONTINENTAL STATES. PAYMENT INSTRUCTION: Payment can be made with paypal. Business or personal check or wire transfer. All payments must be received by Arpi Machine Sales within 7 days. Payments must be sent to ARPI MACHINE SALES at 12165 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us
|
|
|
NEW #10 HSS STRAIGHT-FLUTE TAPER-PIN REAMER, Union butterfield , machinist CNC
Taper Pin Size, 10, Reamer Diameter, 0.7216, Small End Diameter, 0.5799, Flute Type, Straight, Shank Type, Straight, Overall Length(Inch) 9-5/16, Flute Length(Inch) 6-13/16, Shank Diameter(Inch) 5/8, Cutting Direction, Right Hand, Reamer Material HSS,
|
|
|
Machinists Never Used ?? CNC Live Center MT4 Perfect WOW
As nice as you will ever find Could be nos-its that nice Ultra rare and in great shape quality-as nice as you will ever ever find ~~~~~~~~~~~~~~~~~~ all of these parts are from a school lathe that was in the teachers office and never used. For example look at the qc gearbox and look at the gear change patterns on the casting. They show viurtually NO use. Look thru all of the stuff from this machine. You will never ever find nicer. Lower use stuff. Never ever. ```````````````````````````````````````````````````````````````````````````````````````````````````````` Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is ... morethe best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) com
|
|
|
BOCK WORKHOLDING TWIN VISE TV4 KURT ANGLOCK TOOLEX CNC VISE DOUBLE VISE
BOCK WORKHOLDING TWIN VISE MODEL#TV4; MFG. IN USA! IN EXCELLENT CONDITION; 4" JAW WIDTH; EQUIPPED WITH VISE HANDLE AND TWO HARD JAWS AS PICTURED
|
|
|
VERY NICE MAZAK QUICK TURN CNC LATHE MODEL QT-J
VERY NICE MAZAK QUICK TURN CNC LATHE MODEL QT-J Prev Stop Play Next You are bidding on a Mazak CNC Lathe. Model: Quick Turn Universal. This is a very nice machine in good condition and it is fully guaranteed. Maximum Swing: 17.6" Maximum Cutting Dia. 6.30" Maximum Cutting Length: 23" Distance Between Centers: 27" X Axis: 6.5" Z Axis: 21.4" Rapid Traverse X/Z: 472/ 787 IPM S[indle Nose: A2-5 Spindle Bore: 2.2" Maximum Bar Capacity: 1.55" Spindle Speeds: 60- 3600 RPM 15 HP Spindle Motor 8 Position Turret Tailstock Quill Diameter: 1.97" Tialstock Quill Stroke: 2.95" Tailstock Center: MT#3 We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery.
|
|
|
Carbide Endmills & Drills Huge Lot, Fullerton, Gorilla, M.A. Ford, Tools, CNC
You are bidding on a large lot of carbide end mills and drills. Every item you will receive is in great shape with little or no wear and some are new. There is no chips or cracks on any of the tooling. You will get 6 carbide end mills and 5 carbide drills. Quality tooling from great companies. Items are as follows.525 reground Endmill. 418 Endmill, 1/2 6 flute Endmill, 485 Endmill, 1/2" 5 flute Endmill, 1/4" Endmill, 613 coolant thru drill carbide, 1/2" 3 flute carbide drill, 281 drill, 250 carbide drill, 161 carbide drill. All items are carbide, and almost all items are coated. Some items are resharpend. Please email me with any questions or,if you would like me to be more specific about a particular item.
|
|
|
Linear Motion Slide Actuator with Stepper Motor CNC DIY 3D Printer
Linear Motion Slider for you DIY Project. Excellent Condition. Works Great. Overall Dimensions 18" X 5" X 3" Shaft Diameter: 8.00mm. Length 18" 460mm Timing Belt Type P2M4/ GT2 Length 846mm. Pitch 2.00mm Stepper Motor OKI(Okidata) Body 42.00mm. 2-Phase Unipolar(6-Wire) 24VDC, 0.85A, 7.5 Degree/Step Comes with Omron Opto Sensor(Limit Switch)
|
|
|
Erowa chuck for EDM, CNC MILL
Excellent condition. This chuck hardly was used. sold as with no warranty no return.
|
|
|
HITACHI SEIKI HC-400 CNC 20"x18"x18" Horizontal Mill Center with Pallet Changer
ebay template HITACHI SEIKI HC-400 CNC Horizon tal Machining Center with Pallet Changer ITEM PICTURED IN USE Currently running at customer's facility and showing great performance and working ability. Please call for more detailed information. FEATURES Fanuc 15M CNC Control w/ 14" Color CRT 2 Pallet. Pallet Changer Graphic Function 50 Station Automatic Tool Changer 1 Degree Indexing Coolant System. SPECIFICATIONS Longitudinal Travel. X-Axis 20" Vertical Spindle Head Travel. Y-Axis 18" Cross Column Travel. Z-Axis 18" Table Working Surface 15.7" x 15.7" Number of Pallets 2 Min. Table Index Angle 1 Degree Number of Index Positions 360 Spindle Centerline to Table Top 2" to 20" Spindle Nose to Table Center 7" to 25" Max. Table Load 880 Lbs. Feed Rate. All Axes.01 to 200 ipm Rapid Traverse. ... moreAll Axes 590 ipm Spindle Horsepower 7.5 HP Spindle Speeds 60 to 6.000 rpm Spindle Taper CAT-40 Number of Tool Positions 50 Machine Size. Approximate 154" x 96" Machine Height. Approximate 105" Machine Weight. Approximate 14.300 Lbs. Electrical Power 220 Volt. 3 Phase*Specifications subject to verification INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are attached to a skid for and covered in protective co
|
|
|
XYCOM MODEL 2005 INDUSTRIAL OPERATOR WORKSTATION PANEL ~ CNC XYZ STAGES
THIS ITEM IS USED/REFURBISHED Minor Cosmetic Flaws To Be Expected. Scuffs Scratches And/Or Marks XYCOM MODEL 2005 INDUSTRIAL WORKSTATION ~ CNC XYZ STAGES ~ FULL GUARANTEE NO DOA SMALL SCREEN-BURN LOWER CORNERS(SEE PHOTOS) COMES WITH AC POWER CORD& 238 PAGE USER MANUAL ON DISK IN PDF FORMAT INCLUDED RETURN POLICY IF SIGNIFICANTLY NOT AS DESCRIBED* Returns accepted within: 14 Days* Refund given as: Money Back* Return shipping paid by: Buyer* Additional return policy details NEED TO ASK A QUESTION? PLEASE FEEL FREE TO EMAIL_ SHIPPING ALL SHIPPING QUOTES ARE FOR LOWER 48 STATES UNLESS NOTED OTHERWISE Most items will ship within(1) business day International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s ... morecustoms office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as‘gifts’ US and International government regulations prohibit such behavior. Powered by The free listing tool. List your items fast and easy and manage your active items. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ff318c737-0xfd-
|
|
|
5 ft long 5/8" dia Linear bearing pair, CNC mill or arduino 3d printer parts
Massive set of linear bearings in aluminum blocks. I've just added the 5/8" dia 5 ft long steel rods to the auction as well. Will ship in two boxes, shipping will probably cost what I'm asking for buy it now. I'm just trying to give these to a good home.
|
|
|
HITACHI-SEIKI 3-AXIS CNC VERTICAL MACHINING CENTER M#VA35 Q# 26687
QUOTE# 26687. VA35 HITACHI-SEIKI 3-AXIS CNC VERTICAL MACHINING CENTER Serial No VA3068. Model VA35 EQUIPPED WITH: Fanuc#6M 3-Axis CNC Control 18-Position Automatic Tool Changer Fanuc Servo Drives& Ball Screws Full Rapid Traverse CATALOGUE SPECIFICATIONS: Table Dimensions. F-B x R-L) 14" x 39.4" Table Dimensions. F-B x R-L) 355MM x 1000 MM Table Load Capacity. 1100 LBS 500 KG X-Axis Table Longitudinal Travel. 22" 560MM Y-Axis Saddle In/Out Cross Travel. 14" 350MM Z-Axis Spindle-Head Vertical Travel. 16" 400MM Spindle Nose to Table Surface. Minimum. 6" 150MM Spindle Nose to Table Surface. Maximum. 22" 550MM Spindle Center to Colum Surface. 16" 405MM Spindle Taper. 40 Spindle Speeds. Range. 60 To 6000 RPM Cutting Feed Rates. Range. 01 to 142 IPM Cutting Feed Rates. Range. 1 to 3000 MMPM Rapid Traverse ... moreRate. 512 IPM 13 MPM Spindle Motor. Horsepower. 5 HP Weight Approximatel. 7260 LBS 3300 KG PRICE: F.O.B. OUR WAREHOUSE. $6.950.00. ALL MACHIES/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
2005 Hurco VM1 CNC Vertical Machining Center "Video"
2005 Hurco VM1 CNC Vertical Machining Center Specification Description X-Axis Travel 26" Y-Axis Travel 14" Z-Axis Travel 18" Table Size 30" x 14" Maximum Weight on Table 750 LBS Spindle Speeds 8000 RPM Spindle Motor 15 HP Maximum Spindle Torque 54 ft. lbs. 1450 RPM Rapid Traverse Rate- X/Y/Z-Axes 750 IPM Automatic Tool Changer Capacity 16 ATC Spindle Taper CAT 40 Electrics 250V/3/60 Approximate Machine Weight 6200 LBS Equipped With: Max Single Screen CNC Control w/Max Classic Update Advance Velocity Work Light Flood Coolant 8000 RPM Spindle Rigid Tap System Version 2.35.11A Installed Nov 17. 2005 Ulti Pockets DXF Ramp Helical Entry Floopy Drive Graphics Extended HDD Extended Memory(Free Memory 53294660) Machine Hours 10775 If you have any questions please contact us at 866-803-5202 or 714-892-9800 If you need a shipping ... morequote please contact Tim at Abba Freight 866-779-9350 or tims@abbafreight.net Shipping Dimensions: 6ft x 6ft x 88in Weight: 6200 lbs. Video:
|
|
|
PRATT & WHITNEY "TAPE-O-MATIC" CNC VERTICAL MACHINING CENTER M#C Q #26688
QUOTE# 26688. C PRATT& WHITNEY"TAPE-O-MATIC" CNC VERTICAL MACHINING CENTER Serial No. 30750207. Model"C" Series Tape-O-Matic EQUIPPED WITH: Dynapath Delta Series CNC Control w/CRT Bijur Auto Lube System Coolant System(Tank& Pump) CATALOGUE SPECIFICATIONS: Table Working Surface. W x L. 29" x 60" X-Axis Longitudinal Travel. 54" Y-Axis Cross Travel. 36" Z-Axis Vertical Travel. 24" Spindle Speeds. Range. 80 to 4000 RPM Drilling Capacity. Mild Steel. 2" Distance. Spindle to Table, Maximum. 26" Distance. Spindle to Table, Minimum. 0" Motor. Horsepower. 5 HP PRICE: F.O.B. OUR WAREHOUSE.$6.950.00 ALL MACHINES/EQUIPMENT SUBJECT TO PRIOR SELL. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ff39a45a8-0x107-
|
|
|
SHORT TERM DISCOUNT ACT NOW! COBURN RG6 CNC INSERT GRINDER EWAG CARBIDE CBN PCD
COBURN RG6 CNC INSERT GRINDER- Carbide. CBN, PCD Inserts Used but in Excellent Condition! This Machine has been in storage for 12 years- testing shows all features working satisfactory Manual Included- Original software not available- will need to provide your own disc Diamond Wheel included with Machine Buy It now Price $24.500.00 NEW PRICE! SHORT TERM DISCOUNT. ACT NOW! Any questions contact Seller Contact Seller for shipping(freight) information PayPal Only.
|
|
|
Mitsubishi M-H4A/5A M500 CNC Elementary Diagram for U.S. Main Panel Manual
Our internal inventory number on this product is LHM10# MN89-I thru K. OUR RETURN POLICY. Due to the nature of this item. All sale of manuals are final! If you have a problem with the item upon receipt contact us immediately and we will attempt to address the issue! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. You are bidding on a Mitsubishi M-H4A/5A M500 CNC Elementary Diagram for U.S. Main Panel. Table of Contents: None. Publication Number: N/A. Copyright: N/A Weight: 2 Lbs. Dimensions: 8.75" x 11" x 1.25" It is(+/ 200 Pages. Seems complete and in generally FAIR used ... morecondition! These manuals ratings(Poor. Fair, Good) are based mostly on their usability for their information and partly on cosmetic condition! We will be listing many different types of manuals! If there are any obvious deficiencies. We will always strive to let you know, but things can get overlooked. Please check out our Feedback. We are straight shooters! NOTE* FREE SHIPPING& HANDLING to lower 48 States via UPS Ground Service. All Other Domestic Shipments pay $3.00 Boxing/ Handling PLUS shipping costs from Zip 49534! All International Shipments pay $5.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPANY TO GET YOU A BETTER PRICE! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 a.m. delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. International Shipping Policies: We ship F
|
|
|
5802, Norton, , Norton CNC Cylindrical Grinder,
INDUSTRIAL ASSETS MACHINERY IS PLEASED TO OFFER FOR YOUR CONSIDERATION: REFERENCE# 5802 Norton CNC Cylindrical Grinder S/N: M25108 Specifications: Max. Swing Over Bed Ways 52" Distance Between Centers 72" Grinding Wheel Size 26" x 3 1/2" Dimensions(LxWxH) Equipped With: Fanuc 2 Axis CNC Control(Remote Cabinent) 12" 4 Jaw Chuck Paper Filter Coolant System Horsepower: Wheelhead) 7 1/2 Horsepower: Workhead) 5 Location: Holland. OH BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless ... moreotherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes: Prices do not include any federal. State, or local taxes, which are in addition to the purchase price and must be paid by Buyer. Any and all foreign duties and taxes are the responsibilit
|
|
|
Linear Screw Actuator Superfine 25 TPI From CNC Semiconductor Wafer Machine
Linear Screw Actuator This was pulled from a high precision semiconductor wafer machine. Screw has approximately 12" of movement. Screw has approximately 25 threads per inch. 28 lbs_gsrx_vers_474(GS 6.4.2(474)
|
|
|
Phoenix GS CNC Router/Engraver
Phoenix GS CNC Router New controller retrofit: Planet CNC USB Controller MK2/4 Planet CNC USB Software, 3 Axis/ 4 axis capable, Runs excellent. Under power and can demonstrate. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13ff3f9bf76-0xf1-
|
|
|
CNC LIN ENGINEERING LINEAR STEPPER MOTOR 4118M-02-11RO 2.0A Diameter: 5mm x 41mm
CNC LIN ENGINEERING LINEAR STEPPER MOTOR 4118M-02-11RO 2.0A Diameter: 5mm x 41mm You are bidding on USED: CNC LIN ENGINEERING LINEAR STEPPER MOTOR 4118M-02-11RO 2.0A Diameter: 5mm x 41mm LIN ENGINEERING LINEAR STEPPER MOTOR 4118M-02-11RO SHAFT DIAMETER: ~5mm Size of motor: 41mm x 41mm Length of MOTOR INCLUDING THE SHAFT: ~5.2cm 2.0 A This item is for sale as is. My Policies: Please note that most items are not Tested so the item condition is unknown and not guaranteed unless described otherwise. All items are for sale AS ARE! If for any reason you are not satisfied with your purchase please contact us immediately by Email or Phone. Before contacting eBay Resolution center/ Leaving Feedback! If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. ... moreAll e-mails will be answered as soon as possible! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. SHIPPING Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. There is NO extra charge for packing materials or"handling" unless specified in the item description above. PLEASE NOTE: I reserve the right to refuse to ship items to"unconfirmed" PayPal addresses. We are shipping all items by Post Office's Air Mail/ EMS/ UPS- depends on weight. Buyer can choose his prefered way of shipping- but has to pay for it. We are responsible for any D.O.A. issues. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depends on the Post office and custom. If you haven't receive your item within 26 business days after making the payment please contact us immediately. Be note. When leaving us the seller rating on eBa
|
|
|
CNC Haydon Switch E43K4C-2.33-001ENG Stepper Motor Linear Actuator Lead Screw
SquareTrade © AP6.0 CNC Haydon Switch E43K4C-2.33-001ENG Stepper Motor Linear Actuator Lead Screw You are bidding on USED: CNC Haydon Switch E43K4C-2.33-001ENG Stepper Motor Linear Actuator Lead Screw Haydon Switch& Instrument Inc. Step Motor Linear Actuator LeadScrew E43K4C-2.33-001ENG 17 Tpi Lenth including motor: ~18.7cm/ 7.4" Lenth of screw: ~15cm/ 5.9" Diameter of screw(outside) ~6.28mm For Sale As Is. My Policies: Please note that most items are not Tested so the item condition is unknown and not guaranteed unless described otherwise. All items are for sale AS ARE! If for any reason you are not satisfied with your purchase please contact us immediately by Email or Phone. Before contacting eBay Resolution center/ Leaving Feedback! If you are satisfied with your purchase please leave us a positive feedback! Feel free ... moreto contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. SHIPPING Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. There is NO extra charge for packing materials or"handling" unless specified in the item description above. PLEASE NOTE: I reserve the right to refuse to ship items to"unconfirmed" PayPal addresses. We are shipping all items by Post Office's Air Mail/ EMS/ UPS- depends on weight. Buyer can choose his prefered way of shipping- but has to pay for it. We are responsible for any D.O.A. issues. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depends on the Post office and custom. If you haven't receive your item within 26 business days after making the payment please contact
|
|
|
Mitsubishi M-H80D CNC Horizontal Machining Center, 31" Pallets, Cat 50, 120 ATC
MITSUBISHI M-H80D 4-AXIS CNC HORIZONTAL MACHINING CENTER Serial No. CH4117 New 1993 EQUIPPED WITH Mitsubishi Meldas 300 CNC Controls Full Contouring 4th Axis(2) 31.5" Pallets Coolant Through Spindle 2 Chip Auger Box Way Construction SPECIFICATIONS Pallet Size 31.5" x 31.5" No. Of Pallets, 2, No. Pallet Positions, 360.000, Max. Load On Pallet, 4.400 Lbs, Travels, X-Axis, 49.2" Y-Axis, 39.4" Z-Axis, 33.5" Rapid Traverse X.Y Axes, 787 IPM, Z-Axis, 591 IPM, Cutting Feed Rate(X.Y,Z) 04- 196 IPM, Spindle Nose To Table, 9.8" 43" Spindle Speed, 40-6000 RPM, Spindle Taper, Cat 50, No. Positions On Tool Changer, 120 ATC, Spindle Motor, 40HP, Approximate Overall Weight, 52.000 Lbs, FREE LOADING. See a video of this machine right before we removed it from service: We do have a video of this machine running. Please ... morecontact us and we will send a link. Machine has been cleaned but we have not run it at our facility. It is being sold as-is. With no warranties or guarantees either expressed or implied.
|
|
|
Yaskawa SGDZ-MD20EN7B 2-Axis Servo Amplifier 2x300W CNC
Questions? Call us: 1-877-328-9236. Yaskawa SGDZ-MD20EN7B 2-Axis Servo Amplifier 2x300W CNC. Manufacturer: Yaskawa Model: SGDZ-MD20EN7B Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Yaskawa Condition: Used. Comes in non-original packaging. It is in good cosmetic condition. Notes: It was removed from a machine that was parted-out and not tested after removal. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Yaskawa SGDZ-MD20EN7B 2-Axis Servo Amplifier Specifications: Manufacturer: Yaskawa Model: SGDZ-MD20EN7B Outputs: 2 x 300W Max. current(per motor) 17A Power supply voltage: 48VDC Control circuit voltage: 24VDC Compatible motors: SGMAJ(Σ II) series. 200W or 300W@ 48VDC Control mode: Torque control Encoder feedback: Serial: 13-bit incremental or ... more16-bit. 17-bit absolute Communication interface: SynqNet UL. CUL, EN standards Dimensions: 7" x 7" x 1.8" Features: Automatic network configuration. Remote drive setup and remote diagnostics simplify system configuration 64kHz PWM frequency and up to 17-bit encoder feedback support enable high performance system implementation Multi-axis capability in a small form factor High MTBF improves system up-time SKU: K11D035 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit ca
|
|
|
Sherline 87110- Controller box for 8700 CNC w/ stepper motor DEMO SAVE BIG!
Made in the USA! 87110 comes with controller box for 8700 CNC Rotary Controller. Power supply and stepper motor. This is purchased to convert your 3700-CNC to an 8700. This is a lightly used demo unit. NO original box. ScaleAutoArt is a Sherline approved dealer. Shipping is direct from Sherline and usually ships UPS Ground Service w/in 48 hours after receiving payment. Note: All purchases made after 11:00 am Eastern time will be processed the following day.
|
|
|
EDM MACHINE MACHINIST FABRICATOR JEWLER LATHE MILL CNC MACHINE SHOP SPECIAL NICE
THANK YOU FOR VIEWING MY ITEM I AM SELLING MY EDM MACHINE USED IN MY BIKE SHOP I USED THIS FOR MAKING GEARS SPROCKETS AND ROTORS MACHINE IS IN EXCELLENT WORKING CONDITION IT IS A HANSVEDT SM/201 I HAVE A DIGITAL READOUT WITH IT HYDRAULIC CONTROL WITH SEPERATE TANK THIS OPERATES ON 110 VOLTS PERFECT FOR GARGE SMALL SHOP JEWLERS OR PRODUCTION RUNS SPECS ON SIZE PLATEN SIZE 5 X 13 PLATEN TO TABLE UPTO 16 IN 9 X 15 TABLE FEATURES ARC DURATION RAM SET ON TIME VOLTAGE DOWN TO MICROSECOND COMES AS PICTURED WITH DETAILED INSTRUCTION BOOK AND MANUAL I WILL SHIP WORLD WIDE CRATE AND PALLET IS FREE I AM WILLING TO ENTERTAIN SERIOUS OFFERS THIS IS A MUST HAVE HAVE FOR ANY AND ALL FABRICATIONS I HAVE A NEW BUILDING AND PURCHASED A LARGER MACHINE SO I WILL PASS THIS ONE ON PLEASE FEEL FREE TO CALL WITH QUESTIONS DETAILS OR INFO THANKS DAVE 248 875 2089
|
|
|
Milltronics 3 Axis CNC Mill New Controls
I am selling a 3 axis CNC Milling machine with new servo motors and controls. I did the retrofit myself using the Machmotion system. Controls are 3 years old and include Mitsubishi servo and servo controllers through Mach3 platform on Windows XP. The system works great. And is modern enough to provide years of reliable service. Machine runs excellent. With minimal backlash in the ball screws. Spindle is in excellent condition. Machine shows cosmetic wear on paint, but all the ways are tight. Machine is ready to go to work tomorrow. Table: 13x42 Travel: 31.5x17x19 Serial Number: W1703 Country of Manufacture: USA Year 1980 Spindle: CAT40 Max Spindle Speed 3000rmp Flood coolant system VFD Automatic spindle speed control Approximate weight: 3200lbs I am downsizing my shop and am a reluctant seller of this machine which has given me fantastic ... moreservice. To come see it or for additional questions please call Graham 8583241848 I prefer local pickup. But am happy to quote freight. Delivery might be available at a mileage cost depending on location please inquire if you need this option.
|
|
|
IKO Linear Bearings LWLF24B LM GUIDE CNC Router 669mm THK NSK Lot of 2
Item: Linear Bearings Manufacturer: IKO Country Of Origin: Japan Quantity: 2rails& 4blocks(Lot of 2) Overall Height(Rail Combination with Block) = 14mm Rail width = 24 mm Rail length = 669mm- FREE SHPPING FEE. CONDITION- TAKEN FROM A WORKING EQUIPMENT-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange ... morean item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
BNK2520-3.6+860mm THK Used Ground Ball Screw Linear Bearing NSK CNC Route
Specification Model Number: BNK2520-3.6 Manufacturer: THK Country Of Origin: Japan. Quantity: 1 Unit. Condition: Used(good working condition) Screw Type: Ground Ball Screw. Main Size(Metric) Shaft Diameter = 25mm Lead(Pitch- distance by 1 rotation) = 20mm Nut Diameter = 47 mm Nut PCD = 60 mm NUT Length = 53 mm Overall Length: 860mm Screw Length: 710mm Motor Side(Fixture Part) diameter for coupling: 15mm Motor Side(Fixture Part) diameter: 20mm(applicable to EK20. BK20, FK20) Support Side diameter: 20mm(applicable to EF20.BF20,FF20) Ball Screw Support Unit: made own support unit nickel plated for anti-rust. Length of Ball Screw. There can be a difference of 1~2mm. The ball inside the Ball Screw Nut. Can fall if you eject the Nut from Screw D on't eject the screw nut from the screw. Review catalog image Main dimension. Machined part is not ... moresame as catalog image. The Serial Number may be different from actual. But the quality of item is almost equal. Applications: for linear motion. Factory Automation system. CNC route If You Want If you want review actual item then request actual image before buying. Send message. You c an purchase more quanti ty of goods. Please message to us. Actual item quantity is more exist. If you have any questions about product or shipping method. Send message us and we will help your business with pleasure. Shipping Notice: We Use shipping address by PAYPAL Information. Since it is an international expedited rate shipping. It usually takes 5 to 10 days to deliver. Sometimes it takes more than usual. Please understand it depends on the customs and post office of your country. But please don't worry. Most of the time it is delivered on time. If you must delivered on time. Please ask us before buying. It can be shipped more faster ship method that add ship payment. Also let us know your contact number(phone or mobile number) for accurate delivery. Or you check your shipping address and information before you bid. You can find shipped post information at" http:ww
|
|
|
1996 Milltronics Partner ML-20 CNC Lathe 20x60"
1996 Milltronics Partner ML-20 cnc lathe 20 x 40" gap bed. Comes with manuals. I can send a video or you can see the machine in person under power in Aberdeen. NJ. NJ and NY residents must add sales tax or provide a valid exemption. PLEASE CHECK MY OTHER ITEMS. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13ff987bcb3-0xf4-
|
|
|
HH ROBERTS/TOPWELL 3 AXIS CNC BEDMILL (VIDEO) REDUCED PRICE
THIS IS A 3 AXIS CNC MILL WITH AN ANILAM 1100M CNC CONVERSATIONAL OR G CODE CONTROL YR. 1996 RUNS LIKE A NEW MACHINE TABLE SIZE 13"x59" TRAVEL 20"X40" SPINDLE TAPER#40 5 HP 220/440 VOLTS ANY QUESTIONS CALL BILL 317 638-4100 CLICK LINK FOR VIDEO http:youtu.be/uzfTck-7eX0 I SOLD MY BUILDING AFTER 36YRS. I REDUCED THE PRICE TO $13.500.00 NO CHARGE FOR LOADING
|
|
|
HH ROBERTS/TOPWELL 3 AXIS CNC BEDMILL "RIGID HEAD" (VIDEO) REDUCED PRICE
THIS IS A 1997 3 AXIS"HEAVY DUTY" CNC MILL WITH ANILAM COLOR 1400M CONTROL. CONVERSATIONAL OR G CODE CONTROL. WITH PROGRAMABLE SPINDLE SPEEDS TABLE SIZE 16"X68" TRAVEL 22"X50" SPINDLE TAPER#40 HP 10 230 VOLTS 3 PH. CLICK ON THIS LINK FOR VIDEO ANY QUESTIONS CALL BILL 317 638-4100 OR EMAIL: INDIANAPOLIS. IN. 46218 I SOLD MY BUILDING AFTER 36 YRS. I REDUCED THE PRICE TO $15.500.00 NO CHARGE FOR LOADING
|
|
|
#20 SGS 135 Hi-Per Carb Drill HP Solid Carbide CNC TiN
SGS Brand SGS 135 Series HI-PER CARB TiN Coated.161 Diameter(20) 5/8" Flute Length 2 3/4" OAL 1/4" Shank 1 1/2" Shank Length 135 Degree Drill Point NEW! In original container! Call or email if you have any questions. Phil(231) 775-2355. Check out my other inserts. End mills, drills, taps and holders!
|
|
|
475 Boxes Micro Carbide Drill Bits PCB CNC Jewelry Roto
Up for auction is one box of carbide drill bits for $22.50 You can purchase one box or as many boxes as you need. Each box contains 50 of the same size drills. All of these bits have a 1/8" shank. And overall length is about 1 1/2 inches. All of my drills have been resharpened by the manufacturer to insure a perfect point and cleaned by ultrasonics to remove loose debris from the flutes. Designed for the circuit board industry, they are also used for CNC machines, Jewelers Tools, Dremels, Royobs and Roto-Zips as well as other high speed rotary Drills. Pick out the sizes you need from my list below. Sizes are the number as well as the Dec. inch SIZE QUANTITY SIZE QUANTITY SIZE QUANTITY#81.0130 only 25 bits#38.1015 sold out 1.15mm.0453 4#78.0160 sold out#35.1100 sold out 1.20mm.0472 6#77.0180 7#32.1160 sold out 1.25mm.0492 5#76.0200 2#31.1200 ... moresold out 1.30mm.0512 14#69.0292 sold out#29.1360 3 1.35mm.0531 3#67.0320 sold out#27.1440 2 1.65mm.0650 sold out#66.0330 sold out#26.1470 11 1.95mm.0768 sold out#61.0390 sold out#25.1495 sold out 2.15mm.0846 1#60.0400 1#24.1520 sold out 2.20mm.0866 sold out#59.0410 9#22.1570 2 2.30mm.0906 4#57.0430 sold on other#21.1590 sold out 2.40mm.0945 13#56.0465 auction#20.1610 sold out 2.75mm.1083 5#55.0520" 19.1660 2 3.00mm.1181 sold out#54.0550 sold out#18.1695 sold out 3.10mm.1220 1#53.0595 sold out#17.1730 1 3.25mm.1280 sold out#52.0635 sold out#16.1770 sold out 3.30mm.1299 sold out#50.0700 sold out#15.1800 sold out 3.35mm.1319 1#49.0730 sold out#14.1820 sold out 3.50mm.1378 2#48.0760 sold out#13.1850 sold out 3.60mm.1417 sold out#47.0785 sold out#12.1890 sold out 3.90mm.1530 3#42.0935 sold out 1/8.1250 12 4.10mm.1614 1#40.0980 sold out 3/64.2031 sold out 4.25mm.1673 1#39.0995 sold out 3/32.0938 1 4.75mm.1870 1.80mm.0315 sold out 4.85mm.1909 sold out.85mm.0335 sold out 2.70mm.1063 sold out 3.20mm.1260 3 Due to this type of auction it is possible to sell out of a
|
|
|
(3) CNC DC SERVO MOTORS GECKO drive compatible
This auction is for 3 servo motors. Great for use with small CNC systems. 3D printers and robotics projects. YASKAWA Minertia DC Motor& Encoder Permanent magnet servo motor Model# UGFMED-C9MRX11 Motor Specs No Load Rating INPUT:12VDC, Max Current of 0.36A@ 1930 RPM INPUT:24VDC, Max Current of 0.42A@ 4500 RPM Torque Rating Rated at 12VDC Peak Rated Torque: 22.2 oz-in Rated Torque: 4.2 oz-in Torque Constant: 5.1 oz-in/amp Encoder Specs Optical Encoder 200 Count/rev. 2 Channels Motor Dimensions: Diameter: 50mm. Length: 115mm Shaft Dimensions: Diameter: 8mm. Length: 25mm(4) Tapped holes on face for mounting or special bracket, bracket& plastic gear are removable sale is for one motor
|
|
|
1993 Elb CNC Creep Feed grinder- 45 HP ! Nice !
Elb Micro-Cut 6 Creep Feed grinder. Manuf in 1993. 45 HP spindle drive with spindle speed range of 1000 to 3400 RPM. Max grinding length 24" table stroke to 28" Max grinding width 12" Max grinding height 16" Maximum table load 616 lbs. Grinding feed rate.8" to 800" min Vertical feed rate max 12"min Grinding wheel 16 x 2 x 5" CNC Control is Unicon Promodul U Powered wheel dressing. Used 6 years only, excellent condition. Includes robot loader shown in second photo.but does not include the conveyor shown. Cost $325.000 new. Can assist with finding trucking. Loading at no charge. Payment of $1,000 down via Paypal ok but balance should be paid via company check or bank wire. Email with questions.
|
|
 |