|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Chino, United States 3 Axis CNC Router Engraver Engraving Cutting 4040 Wood Carving Milling Machine Description Accurate Engraving Is Not Possible Without an Engraving Machine. ... morethe Aluminum Frame Engraving Machine Is More Durable, Stronger, and Has a Long Service Life. the Engraving Machine with the Industrial-grade Chip and 75w High-power Spindle Motor Takes a Very Short Time to Complete the Engraving, Which Is More Highly Efficient. Specification Color: Blue, Silver Material: Aluminum, Wood Maximum Workpiece Thickness: 78mm/3.07inch Effective Stroke: 400*400*83mm/15.75*15.75*3.27inch Drive Power: 12v 5a Spindle Power: 75w Voltage: 110v Power: 100w Spindle Speed: 0-10000rpm Spindle Accuracy: Radial Runout ≤ 0.05mm Stepper Motor: 42 Two-phase Stepper Motor Rotation Speed: 6000rpm Acceptable.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification Color: Blue, Silver Material: Aluminum, Wood Maximum Workpiece Thickness: 78mm/3.07inch Effective Stroke: 400*400*83mm/15.75*15.75*3.27inch ... moreDrive Power: 12v 5a Spindle Power: 75w Voltage: 110v Power: 100w Spindle Speed: 0-10000rpm Spindle Accuracy: Radial Runout ≤ 0.05mm Stepper Motor: 42 Two-phase Stepper Motor Rotation Speed: 6000rpm Acceptable Software: Grbl/Candle Communication Interface: Usb Gross Weight: 12kg/26.46lbs Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting) Standard Spindle: 42mm High-speed Spindle / Er11 Chuck / 3.175mm Clamping Centre Workbench Size: 60*52cm/23.62*20.47inch Product Size: 74.5*61.5*39cm/29.33*24.21*15.35inch Package Size: 67*39*29cm/26.38*15.35*11.42inch Package Included 1 Set* cutter .
Buy It Now
$10.00 Shipping Condition: New Location: Chino, United States Accurate Engraving Is Not Possible Without an Engraving Machine. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). ... moreWide Application: with an Effective Engraving Area of 400 400 83mm, the Machine Can Easily Accommodate Most Projects.
Buy It Now
Free Shipping Condition: New Location: Chino, United States It is safer with a case to keep the spindle and dust inside while engraving. This 3018-SE has a transparent enclosure, which enable to watch the engraving ... moreprocess from every side. The new spindle mount not only can fit 5W and 20W modules directly, but also can upgrade to 300W spindle directly.
Buy It Now
$50.00 Shipping Condition: New Location: Chino, United States 4Axis USB 1500W Router Engraving Machine Engraver For Wood Acrylic 6090 Ball Screw SKU: 1500W-6090T1-USB+1500W-6090T2-USB+TS009USB Description: 6090 Router ... moreengraving machine parameters: Model: 6090GZ Outside dimension: 1150*970*650mm(L*W*H) Working platform size: 1045*720mm(L*W) Frame Material：The whole machine used 6061 aluminum profiles Max. Feeding height: ≤140mm(From base of Z axis to platform) X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z) Sliding unit: X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws Drive unit: X axis: ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails Z axis: ø12 high-strength round rail Stepping motor: 57 two-phase 3A Driving Power for Stepping motor: AC110,.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 4040 CNC Machine Kit The engraving machine with the industrial-grade chip and 75W high-power spindle motor takes a very short time to complete the engraving, ... morewhich is more highly efficient. The aluminum frame engraving machine is more durable, stronger, and has a long service life. Package Included 1 Set* cutter 1* Z Probe 1* Right-y-axis 1* U Disk 1* Usb 1* Power Supply 1*Power Cable 4* Clamps 1*Manual Other Accessories for Installation.
Buy It Now
Free Shipping Condition: New Location: China Suit for West Lake Bench ZQ4113/ ZQ4116. Drill Press Table Crank Handle Raise Lower 14.5mm Bore West Lake Bench ZQ4113.
Buy It Now
Free Shipping Condition: New Location: Chino, United States DIY USB CNC& Laser Engraving Router Carving Engraver PCB Milling Cutting Machine Description: Router engraving machine parameters: Model:6090GZ Outside ... moredimension: 1150*970*650mm(L*W*H) Working platform size: 1045*720mm(L*W) Frame Material：The whole machine used 6061 aluminum profiles Max. Feeding height: ≤140mm(From base of Z axis to platform) X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z) Sliding unit: X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws Drive unit: X axis: ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails Z axis: ø12 high-strength round rail Stepping motor: 57 two-phase 3A (with handwheels) Driving Power for Stepping motor: AC110V, 240W, out put: DC24V, 10A Maximum Idle speed: 1500mm/min.
Buy It Now
$50.00 Shipping Condition: New Location: Chino, United States 1x Sinal Cable for a Axis. 12x Aluminium Fastener. 2x Cutter 2 6mm. 2x Cutter 3 6mm. Feeding Height:≤140mm(from Base of Z Axis to Platform). X Axis:sfu1605 ... moreBall Screws ;. Y Axis:sfu1605 Ball Screws;. Z Axis:sfu1204 Ball Screws.
Buy It Now
Free Shipping Condition: New Location: China Colour: Black. Before you open a case.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States 2-60mm x 38mm 30-48v. 40amp brushless cooling fans rated to 100,000 hours of use. This kit includes the following fans for your CNC cooling system.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States 2Axis Digital Readout DRO Display TTL Linear Scale Encoder for Mill Lathe CNC US Benefit : (1)Digital display to eliminate backlash and improve precision ... more(2)Advanced trigonometric calculation so to accomplish a perfect project (3)11.6”wide display to offer excellent long-distance viewing (4)DRO providing a two axis display with pitch circle calculator, diameter/radius conversion, absolute and incremental toggle, and inch metric toggle (5)Digital readout kit can avoid wasting weeks to check machine precision (6)Lifetime free technical support, 2Years warranty, 30-day return Application : This DRO kit is commonly fitted to machines , especially for metal working — lathes, cylindrical grinders, milling machines, surface grinders, boring mills and other machine tools.
Buy It Now
$5.00 Shipping Condition: New – Open box Location: Hughesville, United States CNC Edge Profiler Diamond Router But.
Buy It Now
$10.00 Shipping Condition: New Location: Chino, United States 4040 CNC Machine Kit. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). Material: Aluminum, Wood. With an effective ... moreengraving area of 400 400 83mm, the machine can easily accommodate most projects.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 4040 CNC Machine Kit. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). With an effective engraving area of 400 ... more400 83mm, the machine can easily accommodate most projects.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Details Straight Square Rails: The straight square rails allow the bearings to work for long periods without affecting performance. Emergency Stop Button: ... moreYou can press the emergency stop button to protect the machine when it is affected or when it is working erratically. Package Included 1 Set* cutter 1* Z Probe 1* Right-Y-axis 1* U Disk 1* USB 1* Power Supply 1*Power Cable 4* Clamps 1*Manual Other Accessories for Installation.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Accurate engraving is not possible without an engraving machine. Wide Application: With an effective engraving area of 400 400 83mm, the machine can easily ... moreaccommodate most projects. DIY: The mini DIY engraving machine can be used to make gifts for your friends and exercise your hands-on skills.
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States Latest CH340G CNC Shield expansion board Version 3.0 for ArduinoIDE.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 3 Axis CNC Router Engraver Engraving Cutting 4040 Wood Carving Milling Machine Description Accurate Engraving Is Not Possible Without an Engraving Machine. ... morethe Aluminum Frame Engraving Machine Is More Durable, Stronger, and Has a Long Service Life. the Engraving Machine with the Industrial-grade Chip and 75w High-power Spindle Motor Takes a Very Short Time to Complete the Engraving, Which Is More Highly Efficient. Specification Color: Blue, Silver Material: Aluminum, Wood Maximum Workpiece Thickness: 78mm/3.07inch Effective Stroke: 400*400*83mm/15.75*15.75*3.27inch Drive Power: 12v 5a Spindle Power: 75w Voltage: 110v Power: 100w Spindle Speed: 0-10000rpm Spindle Accuracy: Radial Runout ≤ 0.05mm Stepper Motor: 42 Two-phase Stepper Motor Rotation Speed: 6000rpm Accepta.
Buy It Now
Free Shipping Condition: New Location: United States Frame Material:The whole machine used 6061 aluminum profiles Max. Feeding height:≤140mm(From base of Z axis to platform) X,Y,Z Working Area:600x900x150mm ... moreSliding unit: X axis:SFU1605 Ball Screws; Y axis:SFU1605 Ball Screws; Z axis:SFU1204 Ball Screws Drive unit: X axis:ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails; Z axis: ø12 high-strength round rail Stepping motor:two-phase 3A (with hand wheels) Driving Power for Stepping motor:AC110,240W, Output DC24V10A Maximum Idle speed:1500mm/m Working Speed:50-1500mm/min (different material with different speed settings) Spindle motor:2200W high-speed variable frequency spindle motor, ER20 chuck.
Buy It Now
Free Shipping Condition: New Location: Chino, United States SKU: 1500W-6040TUSB-1+1500W-6040TUSB-2+1500W-TS002USB Notes:Please prepare a computer with USB Interface. DESCRIPTION: Pack List: 1X main unit (Frame) ... more1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Rahmenmaterial: Die gesamte Maschine verwendete 6061 Aluminiumprofile Max. Förderhöhe: ≤140mm (Von der Basis der Z-Achse zur Plattform) X, Y, Z Arbeitsbereich: ... more600x900x150mm Schiebeeinheit: X-Achse: SFU1605 Kugelgewindetriebe; Y-Achse: SFU1605 Kugelgewindetriebe; Z-Achse: SFU1204 Kugelgewindetriebe Antriebseinheit: X-Achse: ø20 Hochintensive Rundschiene, Y-Achse: hochfeste Aluminium-Basisschienen SBRø20; Z-Achse: ø12 hochfeste Rundschiene Schrittmotor: zweiphasig 3A (mit Handrädern) Antriebsleistung für Schrittmotor: AC110,240W, Ausgang DC24V10A Maximale Leerlaufdrehzahl: 1500mm / m Arbeitsgeschwindigkeit: 50-1500mm / min (unterschiedliches Material mit verschiedenen Geschwindigkeitseinstellungen) Spindelmotor: 2200W Hochgeschwindigkeits-Spindelmotor mit variabler Frequenz,.
Buy It Now
Free Shipping Condition: New Location: Chino, United States engraving machine parameters: X, Y, Z Working Area: 600(Y)*390（X）*120(Z)mm Outside dimension: 865*680*570mm（L*W*H） Table size: 770（Y）*490（X）mm Lathe structure: ... more6061/6063 Aluminium alloy Max. Feeding height: ≤100mm Drive unit X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power:AC220V, 50Hz, 5A, 1.5KW VFD Spindle motor: 1.5 KW water cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Communication interface: through USB Port with computer Maximum Idle speed: 0-1500mm/min.
Buy It Now
$16.25 Shipping Condition: New – Open box Location: Pompano Beach, United States Cnc Stonework Drainboard Polishing 45° Marmoelettromeccanica Pos 4 & 5 50mm adapt
Buy It Now
Free Shipping Condition: New Location: Chino, United States Accurate engraving is not possible without an engraving machine. The starting, stopping, and flipping are done within a few pulses. It is suitable for ... moreindustrial technology, advertising design, art, educational programs, amateurs, architectural models, printed circuit boards, etc.
Buy It Now
Free Shipping Condition: New Location: Chino, United States This 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. The ... morespindle motor must connect with the VFD. VOLTS, current, power: AC220V, 60Hz, 5A,1.5 KW VFD.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Chuck type: Standard ER32 collet 3~20mm (Hollow shaft). 11 pcs complete set ER32 collet 11 pcs complete set ER32 collet3mm,4mm,5mm,6mm,8mm,10mm,12mm,14mm,16mm,18mm,20mm. ... moreAxis: 80RPM. Step motor: 57 phase stepper motor (two-phase 4 wire current 3A ).
Buy It Now
Free Shipping Condition: New Location: Chino, United States This 6040 Machine Is Suitable for Industry, Technology Research, Advertising Design. the Spindle Motor Must Connect with the Vfd. Volts, Current, Power: ... moreAc110 /60hz, 5a, 1.5kw Vfd. the Machine Can Connect with ComputerAs Other External Device Such As Printer, Scanner.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts ... moreand crafts DIY Design (Note：No Laser Head Included) Description: This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly. It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern. Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast asse.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Accurate engraving is not possible without an engraving machine. Power: 100W. Wide Application: With an effective engraving area of 400 400 83mm, the ... moremachine can easily accommodate most projects. DIY: The mini DIY engraving machine can be used to make gifts for your friends and exercise your hands-on skills.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Running Direction: X, Y, Z Axis. Features: Manual Knobs and Limit Switches for X, Y, Z Axis. Engraving File Format: NC/JPG / PNG / TIF / BMP. 1 Box of ... more10cs Cutter(3.175mm). Communication Interface: USB Port to Computer.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1500W 3 Axis 6040 CNC Router Milling Machine 3D Desktop Engraver w/ Handwheel.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Running Direction: X, Y, Z Axis. Features: Manual Knobs and Limit Switches for X, Y, Z Axis. Engraving File Format: Nc/Jpg / Png / Tif / Bmp. Communication ... moreInterface: Usb Port to Computer. Stepper Motor：two Phase, 42 Stepper Motor.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 4040 CNC Machine Kit. Power: 100w. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). Material: Aluminum, Wood. ... moreCommunication Interface: Usb. With an effective engraving area of 400 400 83mm, the machine can easily accommodate most projects.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package List: 1set 3018 pro 3 Axis Cnc Router Engraving Machine Kit (Without Laser) 1 Box of 10cs Cutter(3.175mm) 4pcs Plate Clamps 1 Power Cord 1 Usb ... moreCable 1 English Manual 1 Tool Setting Auto-check Instrument Z-probe.
Buy It Now
Free Shipping Condition: New Location: Chino, United States SKU: 3-1.5KW6040A-USB+3-1.5KW6040B-USB+TS007USB Attention: It is also not recommended to connect to a computers with 64 bit versions of Windows due to ... moreproblems with the usb port driver. Description: Suitable for PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper, 1. This 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. 3. It can used for engraving: advertising signs, PCB.
Buy It Now
Free Shipping Condition: New Location: United States USB 3axis 1.5KW CNC 6040 Router Engraving Drill/Milling Machine Cutter Engraver.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Running Direction: X, Y, Z Axis. Features: Manual Knobs and Limit Switches for X, Y, Z Axis. Engraving File Format: Nc/Jpg / Png / Tif / Bmp. 1 Box of ... more10cs Cutter(3.175mm). Communication Interface: Usb Port to Computer.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Running Direction: X, Y, Z Axis. Features: Manual Knobs And Limit Switches For X, Y, Z Axis. Engraving File Format: Nc/Jpg / Png / Tif / Bmp. Communication ... moreInterface: Usb Port To Computer. FeaturesManual Knobs And Limit Switches For X, Y, Z Axis.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1. This 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2. ... moreIt can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. 3. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. 4. The mini router Frame is movable. The machine can connect with computer as other external device such as printer, scanner.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Running Direction: X, Y, Z Axis. Features: Manual Knobs and Limit Switches for X, Y, Z Axis. Engraving File Format: Nc/Jpg / Png / Tif / Bmp. 1 Box of ... more10cs Cutter(3.175mm). Stepper Motor：two Phase, 42 Stepper Motor.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Specifications: Model : Automatic tool setting Color : Black + Silver Material: Grinding 4S+ superhard alloy Output mode: normally closed Normally closed ... morespecification technical parameters Output mode: BNC (normally closed) Pre-trip: almost zero Stroke: 5mm Repeatability: 0.001mm (condition: operating speed 50-200mm / min) Contact life: 3 million times Protection structure: IP67 Contact force: 1.5N Contact material: super hard alloy Housing material: grinding 4S Contact rating: DC24V 20mA (MAX) (recommended value 10mA) resistance load Cable: 3m oil resistant °4 core ∞5 tensile strength 307N minimum bending radius R7 Protection tube: minimum bending radius 1 m R25 Alarm signal when the trip is exceeded Output mode: BNC (normally closed) (2.5mm from the measurement signal).
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States SKU: 3-1.5KW6040A-USB+3-1.5KW6040B-USB+TS007USB Attention: It is also not recommended to connect to a computers with 64 bit versions of Windows due to ... moreproblems with the usb port driver. Description: Suitable for PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper, 1. This 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. 3. It can used for engraving: advertising signs, PCB.
Buy It Now
Free Shipping Condition: New Location: United States Frame Material:The whole machine used 6061 aluminum profiles Max. Feeding height:≤140mm(From base of Z axis to platform) X,Y,Z Working Area:600x900x150mm ... moreSliding unit: X axis:SFU1605 Ball Screws; Y axis:SFU1605 Ball Screws; Z axis:SFU1204 Ball Screws Drive unit: X axis:ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails; Z axis: ø12 high-strength round rail Stepping motor:two-phase 3A (with hand wheels) Driving Power for Stepping motor:AC110,240W, Output DC24V10A Maximum Idle speed:1500mm/m Working Speed:50-1500mm/min (different material with different speed settings) Spindle motor:2200W high-speed variable frequency spindle motor, ER20 chuck.
Buy It Now
Free Shipping Condition: New Location: Chino, United States CNC Router engraving machine parameters: Model: CNC6090GZ Outside dimension:1150*970*650mm(L*W*H) Working platform size:1045*720mm(L*W) Frame Material：The ... morewhole machine used 6061 aluminum profiles Max. Feeding height:≤140mm(From base of Z axis to platform) X,Y,Z Working Area:900(Y)*600(X)*140mm(Z) Sliding unit: X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws Drive unit: X axis:ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails Z axis: ø12 high-strength round rail Stepping motor：57 two-phase 3A (with handwheels) Driving Power for Stepping motor：AC110, 240W, out put:DC24V10A Maximum Idle speed:1500mm/min Working Speed :50-1500mm / min (different material with different speed settings).
Buy It Now
Free Shipping Condition: New Location: United States CNC 6040 4AXIS MACHINE WORKING VIDEO 2200W water cooling spindle. 1X 2200W Spindle. I am interested in this CNC machine but i don't know how to use it. ... moreAnswer: We have video to show how to operate our machine ,If you still don't know after check the video and we can provide remote assistance.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification Color: Blue, Silver Material: Aluminum, Wood Maximum Workpiece Thickness: 78mm/3.07inch Effective Stroke: 400*400*83mm/15.75*15.75*3.27inch ... moreDrive Power: 12V 5A Spindle Power: 75W Voltage: 110V Power: 100W Spindle Speed: 0-10000rpm Spindle Accuracy: Radial Runout ≤ 0.05mm Stepper Motor: 42 Two-phase Stepper Motor Rotation Speed: 6000rpm Acceptable Software: GRBL/Candle Communication Interface: USB Gross Weight: 12kg/26.46lbs Engraving Speed: 50-1500mm / min (Depending on the Material Speed Setting) Standard Spindle: 42mm High-Speed Spindle / ER11 Chuck / 3.175mm Clamping Centre Workbench Size: 60*52cm/23.62*20.47inch Product Size: 74.5*61.5*39cm/29.33*24.21*15.35inch Package Size: 67*39*29cm/26.38*15.35*11.42inch.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Notes:Please prepare a computer with USB Interface. packing list: 1X main unit (Frame) 1X main unit (working base) 2X Fence baffle 1X control boxC 1X ... moreA axis 1X Sinal cable for A axis 1X pump 1X USB line 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable Description 1.This 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2.It can work with various materials.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: Chino, United States Chuck type: Standard ER32 collet 3~20mm (Hollow shaft). 11 pcs complete set ER32 collet 11 pcs complete set ER32 collet3mm,4mm,5mm,6mm,8mm,10mm,12mm,14mm,16mm,18mm,20mm. ... moreAxis: 80RPM. Step motor: 57 phase stepper motor (two-phase 4 wire current 3A ).
Buy It Now
$8.99 Shipping Condition: New Location: China Quill Feed Handle Assembly. Fits EISEN and most milling machines from Taiwan.
Buy It Now
Free Shipping Condition: New Location: Chino, United States It is safer with a case to keep the spindle and dust inside while engraving. More Accurate: The engraving machine with the industrial-grade chip has a ... moreprecise calculation that enables accurate engraving.
Buy It Now
Free Shipping Condition: New Location: United States Applicable Model: For 3018 3020 4540 series CNC 3 axes engraving machine. Feature: 1. Connector Port: 8 Pin. 1 x User Manual.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Package list: 1X main unit (Frame) 1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 1X USB cable ... more2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual 1x Tools Setting Auto-Check Instrument for 3D.
Buy It Now
Free Shipping Condition: New Location: China Applies to traditional milling machines and machining centers. Unplug finder’s pins, the spring can be replaced. 1pc x edge finder. The lower end of the ... morerotation part is magnetically shielded. High strength and hardness.
Buy It Now
$100.00 Shipping Condition: New Location: Chino, United States Engraver with tool sensor. X axis: SFU1605 Ball Screws;. 2Water cooled spindle motor has higher stability and better concentricity than air cooled motor. ... moreY axis: SFU1605 Ball Screws;. Z axis: SFU1204 Ball Screws.
Buy It Now
Free Shipping Condition: New Location: United States Package list: 1X main unit (Frame) 1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 1X USB cable ... more2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual 1x Tools Setting Auto-Check Instrument.
Buy It Now
Free Shipping Condition: New Location: Chino, United States It is safer with a case to keep the spindle and dust inside while engraving. More Accurate: The engraving machine with the industrial-grade chip has a ... moreprecise calculation that enables accurate engraving.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 3 Axis CNC Router Engraver Engraving Cutting 4040 Wood Carving Milling Machine Description Accurate Engraving Is Not Possible Without an Engraving Machine. ... morethe Aluminum Frame Engraving Machine Is More Durable, Stronger, and Has a Long Service Life. the Engraving Machine with the Industrial-grade Chip and 75w High-power Spindle Motor Takes a Very Short Time to Complete the Engraving, Which Is More Highly Efficient. Specification Color: Blue, Silver Material: Aluminum, Wood Maximum Workpiece Thickness: 78mm/3.07inch Effective Stroke: 400*400*83mm/15.75*15.75*3.27inch Drive Power: 12v 5a Spindle Power: 75w Voltage: 110v Power: 100w Spindle Speed: 0-10000rpm Spindle Accuracy: Radial Runout ≤ 0.05mm Stepper Motor: 42 Two-phase Stepper Motor Rotation Speed: 6000rpm Acceptable.
|
|
|
|
UP TO 2 SETS 12MM THOMSON 13 1/2" LINEAR ROD W PILLOW BLOCKS CNC
SquareTrade © AP6.0 UP TO 2 SETS 12MM THOMSON 13 1/2" LINEAR ROD W PILLOW BLOCKS CNC This is a Fixed Auction for up to 2 Like New sets of 2 Bars. Each 13 1/2 inches long, of 12MM diameter Thomson Linear Race Shafting and a set of 4 Ball Bearing Pillow Blocks with Super Plus SPM12 Bearings. Each Bid is for One Set including two rods and four pillow blocks. This rod is hardened to a 60 case and precision ground. 60 Case LinearRace shaft surface hardness provides resistance to deformation. Whether it be from extreme point contact loading from bearing balls, line contact from rollers, or area contact from sleeve bearings. Hardness also provides resistance to wear, maintaining critical internal bearing fitup dimensions. 60 Case-hardened LinearRace shafting also provides a significant increase in bending and rotational fatigue resistance. ... moreThis fact has been known in the automotive industry for years and is applied to the manufacturer of shafts and axles for cars and trucks. Unlike common shafting. Thomson 60 Case LinearRace shafting is manufactured to the highest quality standards. Their techniques are continuously upgraded with proprietary know-how gained from over 53 years of linear bearing design and manufacture. This assembly will make a very nice precision axis. Many more sizes and lengths available. I will fully guarantee this assembly. Shipping in the Continental US is $7.90- I have very competitive rates for our always welcomed International bidders. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by
|
|
|
Linear Bearings / CNC / Slide / 22"
For bid a set of linear bearings. Shafts are 22" long and 1/2" in dia. The bearings are 2 3/4" in length. n6gonr.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13ec1692349-0xf5-
|
|
|
6" CUSHMAN CHUCK CNC 3 JAW CHUCK MODEL 2F --- L@@K
6" CUSHMAN CHUCK CNC 3 JAW CHUCK MODEL 2F 6" BUCK CHUCK CNC 3 JAW CHUCK MODEL 3634 1 1/4" CENTER HOLE IN GOOD CONDITION All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM ... moreTO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
Roland JWX-10 Jeweler's CNC - RAPID PROTOTYPING MACHINE - JEWELRY CNC - CASTING
Roland JWX-10 Jeweler's CNC THIS MACHINE IS LIKE NEW- IT HAS SEEN MINIMAL USAGE Up for auction is a Roland JWX-10 CNC. This machine is primarily used in the jewelry industry to mill jeweler's wax for casting into jewelry. But it can also be used to prototype small items for other production projects. This machine was purchased for a jewelry project but saw very little use. It comes with all the necessary software to design and create your project(Windows based software) Please feel free to email with any questions. You can find an amazing amount of info if you do a. I am also including a PDF version of the Roland sales flyer and the user's manual below: THIS MACHINE ORIGINALLY COST THOUSANDS MORE THAN MY SELLING PRICE- DON'T MISS THIS AWESOME OPPORTUNITY! PLEASE NOTE: This item is for local pickup ONLY unless you make ALL ... morepickup/crating/shipping arrangements! It is very heavy and I am not able to crate and ship this item. In accordance with eBay's policy I only accept PayPal. Buyer must make payment within 7 days of sale. In the case of combined orders payment must be made within 7 days of the first item closing. After 14 days all nonpaid invoices will be reported to eBay and the item will be relisted. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13ec5435034-0xff-
|
|
|
Homag CNC Panel Saw Model: Profi Line CH 12/38/38
Year of Mfg. 2000. Unit has scoring blade. Low hour machine. Located in a small 4-man shop. Please find us on Google under Gerlach Auctions for more information and to see video of this unit in operation. We are selling this unit at a simulcast(both onsite and internet bidders) LIVE auction in Milwaukee. WI Thursday May 30th. Find our"Contact Us" page to call us.
|
|
|
Masterwood CNC Wood Machining Center Model: Winner 2.45K
Year of Mfg. 2000. 2-Zone, 4'X8' Table, 4 Place ATC. Low hour machine. Located in a small 4-man shop. Please find us on Google under Gerlach Auctions for more information and to see video of this unit in operation. We are selling this unit at a simulcast(both onsite and internet bidders) LIVE auction in Milwaukee. WI Thursday May 30th. Find our"Contact Us" page to call us.
|
|
|
CNC Laser, Trumpf Model Trumatic L-6030 4000 Watt, 2000
Contact Mark Harris at 773-290-1824 or mark@assetexchangeinc.com to recieve more information on this impressive capacity CNC Laser. 4000 watt Trumpf Model Trumatic L-6030 4000 Watt CNC Laser(2000) 4000 Watt. Table Size 7' x 20' 2) Tables, Siemens CNC Control Specifications and Equipment Nomial Wattage: 4000 WATT, Table Size: 7' X 20' 2 Tables) X-Axis Travel: 244" Y-Axis Travel: 83" Z-Axis travel: 5" Resonator: 15.800 Hours) Laser Type: TLF 4000 Turbo, Equipped with: Siemens CNC Control,
|
|
|
Vision VE 810 Series 2 Engraving Machine VE810 Small Format CNC Router USB
This is a Vision Engraving and Routing Systems VE 810 Series 2 Engraving machine. Also included is an Antares 120° diamond tip. A T-slot table kit(VE-810-T-SLOT) is available from Vision for $250.00 and an edge guide kit(18-0304-00) costs $50.61. The VE 810 Engraver is perfect for users who are new to engraving as well as for seasoned professionals. This machine is perfect for marking and creating tags. Small signs, notary seals, knives, lighters, gifts, jewelry, awards, trophy plates, and more. The internal electronics allows for its compact size yet the front panel has large, easy-to-read LCD screen and buttons for optimum control of the engraving process. Add in the optional Self-Centering Deep Vise to engrave odd shaped items up to 3 1/4" deep. State-of-the-art electronic control system, Full-featured front panel with independent ... moreZ-Axis and spindle controls, USB connection, Z Axis Travel 1 in, Y Axis Travel 10 in, X Axis Travel 8 in, AC Power 110/220 VAC@ 5 A Communication Modes USB. RS-232 Retail Price $5.995.00 Inspection by a Hofstra Group technician allows us to guarantee this hardware to perform to your satisfaction. This item carries a 7-day unconditional right of return and a 90-day warranty. In the unlikely event that you need to return it. We will arrange and pay for return shipping in addition to refunding the purchase price and original shipping. Please review our for more information. gsrx_vers_486(GS 6.5.1(486)
|
|
|
CNC Router 22"x17"x5" Free Shipping
Normal.dotm 0 0 1 216 1235 Whatcom Community College 10 2 1516 12.256 0 false 18 pt 18 pt 0 0 false false false CNC WOOD ROUTER22"x17"x5" + DeWalt DW611 Spindle FREE SHIPPING! This device is sturdy and accuratewhen cutting wood. But I've never used it to cut anything harder; it will notcut steel. The spindle motor is newly purchased and includes a 1/4"collet. It uses a TB6560 3-axis driver board and 282 oz-in stepper motors. Allthe hardware for owning a cnc router is included except a computer and I DON'TINCLUDE ANY SOFTWARE. I've been able to cut out all sorts of designs on thismachine including a wood propeller! Its best feed rate is at about 8-10 inchesper minute the way I've used it. Below is a list of the differentincluded features. 1/2" aluminum plate frame with a22"x17"x5" cutting ... morearea. 16mm chrome steel guide rails. 1605 ball bearing ballscrews with 5mmper revolution pitch. 1/2" pillow block bearings. 282 oz-in stepper motors plus wiring.200 steps per revolution. Specification sheet included. 1/4" aluminum couplings. DeWalt DW611 router motor plus baseand 1/4" collet. Variable speed control. Air cooled. TB6560 3 axis stepper motor driver. 25 pin serial cable. 24V 6.5A power supply. email me with any questions you mayhave! I only accept paypal. No Scams! I know one when I see one. I SHIP FOR FREE!
|
|
|
cnc router spindle With Mount And Z Mount Plate And Vacuum Shoe
Small to mid size router spindle. Complete with Mount and Z plate fixture and dust vacuum shoe. 30 K rpm Extremely quiet for its power and RPM. Was only utilized for approximately three weeks on a machine designed to make blinds turns out the pneumatics of the machine were too slow to keep up with the spindles so we ended up designing a punch. these are great little bolt-on solutions for small to mid CNC projects utilizes a drill chuck for tools. Price is just for one unit I have a total of four to sell Posted with
|
|
|
Misc lot of 31 Pull/Retention Studs for CNC Tool Holders
Misc lot of 31 Pull/Retention Studs for CNC Tool Holders ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3641 THERE IS A $10.00 HANDLING FEE INCLUDED THERE IS ALSO AN ADDITIONAL $5.00 FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
DAEWOO MODEL MYNX 500 CNC VERTICAL MACHINING CENTER,40"x,20"y 22.6"z, will ship
DAEWOO MODEL MYNX 500 CNC VERTICAL MACHINING CENTER General Specifications X-axis travel 40.1" Y-axis travel 20.1" Z-axis travel 22.6" Table loading area 19.7 x 47.2" Allowable table load 1760 lbs. Table T-slot spacing x width(4) 4.92 x.71 Spindle nose to table top 7.9 to 30.5" Column to spindle center 20.5" Spindle taper ISO No.40 Spindle speed 8000 RPM AC SPindle motor(30 min) 20 HP Spindle torque(30 min) 142 ft-lbs. Number of tools 24 Tool shank CAT 40 Max. tool dia. 3.5 Max. tool length 9.8" Max. tool weight 17.6 lbs. X and Y axis rapid traverse rate 945 IPM Z axis rapid traverse rate 787 IPM Cutting feed rate.04-315 IPMWatch video: Motor Specifications 20 HP Main motor 3/60/205-235 Volt Machine power required: 24 kVA Equipped With Fanuc 21M CNC Controls Rigid tapping Flood coolant Coolant tank and chip ... morepan Automatic lube system Full enclosure Serial Number AV5E0246 Year 2000 Location PROSPECT HEIGHTS. IL
|
|
|
OKUMA LB-15-II 2-AXIS CNC TURNING CENTER (CHUCKER) OSP 7000L CNC WILL SHIP WORLD
OKUMA LB-15-II 2-AXIS CNC TURNING CENTER(CHUCKER) General Specifications Between centers 500mm(19.69" No. of controlled axes 2 Swing over bed 530mm(20.87" Swing over carriage 530mm(20.87" Swing over cross-slide 340mm(13.39" Distance between centers 520mm(20.47" Max. turning diameter 250mm(9.84" Spindle: Spindle diameter 100mm(3.94" Spindle nose type JIS A2-6 Taper hole 70mm(2.75" x1/10 Through-spindle hole 62mm(2.44" No. of spindle speed range 1 Step Spindle speed 45-4500 RPM Carriage(Z-Axis) Axis travel 520mm(20.47" Feedrate 33.37mm/rev Rapid feedrate 787.40 IPM Cross-Slide(X-Axis) 212m(8.34" Axis travel 2.95"+5.39" Rapid feedrate 590.55 IPM Turret Type V12 No. of tools 12 Tailstock: Tailstock spindle diameter 90mm(3.54" Tailstock spindle taper hole MT No.5 Tailstock spindle ... moretravel 120mm(4.72" Machine weight(approx) 11.616 Lbs VIDEO Equipped With OSP 7000L CNC Controls 12 Position Turret Splash guards Serial Number 1731 Year 1994 Location PROSPECT HEIGHTS. IL
|
|
|
TRAUB MODEL TNS-26-DGY CNC TURNING WITH SUB SPINDLE, LIVE TOOLING & Y-AXIS
TRAUB MODEL TNS-26-DGY CNC TURNING CENTER WITH SUB SPINDLE. LIVE TOOLING& Y-AXIS General Specifications Main spindle Spindle capacity(max. bar dia. 26mm(1.02" Turning length per turret 270mm(10.63" Spindle speed max. 7000 RPM AC motor. Infinitely variable speed Power rating 11kw(15 HP) Max. torque Nm(ft lb) 105(50) Constant power rating 1:7 Spindle nose register dia. 90mm(3.543" Counter Spindle: Spindle capacity(Max. bar dia. 26mm(1.02" Spindle speed max. 7000 RPM AC motor. Infinitely variable speed Power rating5.5kw(7.5 HP) Max. torque 35Nm(17'Lb) Constant power rating 1:4 Spindle nose register dia. 85mm(3.346" Turrets Number of turrets 2 Tool bores for cyl. shanks to DIN 69880 12 each Nominal dia. x-length 25x48mm(984x1.890" Cutting tool shank section to DIN 69880 16x16mm(630x.630" Average chip-to-chip-time ... more1.17 Sec. Indexing time 1st position 0.4 Sec. each additional position0.12 Sec. Drive for rotating turret tools Number of driven tools 2 x 12 Power rating(15% duty cycle) 2.6kW(3.5 HP) Max. torque(15% duty cycle) 4Nm(1.9' Lb. Max. spindle speed 8000 RPM Feed drives X-axes(S1+S2) Rapid traverse and feed rate 12mm(472" Min) Feed thrust 3000N(600 Lb) Feed traverses80mm(3.150" Z-axes(S1+S2) 2 Stock# 10809 2 TRAUB MODEL TNS-26-DGY 8 AXIS CNC MILLING& TURNING CENTER GENERAL SPECIFICATIONS(Con't) Rapid traverse and feed rate 15mm(590" Min. Feed thrust 5000N(1000" Feed traverses270mm(10.630" Y-axes(TNC 30 DGY) Rapid traverse and feed rate 7.5mm(295" Min. Feed thrust 5000N(1000 Lbs) Feed traverses330mm(12.992" C-axesOption Machine DimensionsLength x depth2432x1890mm(95.7x74.4"Height 1850mm(72.8"Weight 3540Kg(7800lbs)with counter spindle and switchgear cabinet)Total installed power rating35kW(47lbs) Motor Specifications Click for video: Not Available Equipped With(2) Work spindles(main& sub-spindle) 2) Turrets each with(12) driven live tools(2) C-axis positioning(Main& Sub-spindles) Y-axis on upper turret Z-axis
|
|
|
#9969 - SHEFFIELD/SCHAUDT PF30 CNC PLUNGEFORM GRINDER
WILL SHIP TO YOUR LOCATION. SHEFFIELD/SCHAUDT MODEL PF30 CNC PLUNGEFORM GRINDING MACHINE. General Specifications Maximum length 24" Maximum diameter 10" Maximum swing 11-3/4" Maximum form depth 1" Maximum form width 9" Grinding wheel: diameter. Hole, width 24" x 12" x 6" Minimum wheel width 1" Wheel speed 7.000 SFPM Workhead speeds 21- 1000 RPM Maximum wheelhead adjustment 7" Wheelhead rapid traverse range 3/8" to 1-1/2" Maximum wheelhead automatic feed 1" Wheelhead infeed range.005 to.475 IPM Crushtrue feed range.004 to.075 IPM Tailstock center taper#11 B& S Platen swivel adjustment 2 Degrees clockwise. 5 Degrees counter Equipped With Sheffield Schaudt CYBERFLEX control system including: linear positioning measuring system and Fanuc model OGC CNC Behind the wheel CRUSHTRUE ... moredressing for part forms up to 6" wide Includes crush roll arbor for rolls up to 4-7/8" O.D. x 3" I.D. x 6-1/4" wide Manual. Laterally adjustable table, 24" lateral adjustment, including: One basic machine general assembly including hardened and ground steel. Double-vee ways with 30 HP wheelhead drive motor Live center workhead. 21-1000 RPM, includes: Center drive and drive dog modified for collet usage and workhead collet actuator Air operated tailstock Automatic mist lubrication system for the spindle and pressure lubrication for the ways Digital readout for lateral table. 0005" resolution Table angle indicator Marposs E5 in-process gauging system Jet wheel cleaner with oscillating nozzle Coolant& filter system Coolant heat exchanger Automatic compensation after truing Serial Number 5.0972 Year 1998.
|
|
|
OKUMA LU-15-2SC-600 4-AXIS BIG BORE CNC LATHE TURNING CENTER
OKUMA LU-15-2SC-600 4-AXIS BIG BORE CNC LATHE TURNING CENTER General Specifications Swing over saddle 14.96" Max. Turning diameter 14.17" Max. Turning length 23.62" Travels(X1& X2) 10.24" 5.50" Travels(Z1& Z2) 25.20" 24.21" Spindle bore diameter 3.15" Spindle nose A2-8 Spindle motor 30 HP Spindle speeds(2 ranges) 75-3800 RPM Tool positions upper 12 Tool positions lower 8 Rapid traverse X-axis 591 IPM Rapid traverse Z-axis 787 IPM Tailstock Taper MT5 Tailstock quill travel 4.72" Approx. weight 12.000 Lbs Motor Specifications Not Available Equipped With OSP 7000L CNC Control(2) Turrets 8 Station Lower 12 Station Upper Chip conveyor Tailstock Collet chuck Turret position compensation Tool life management. Auto door, NC Turret, In/Metric, Animation, Load monitor, Touch setter, Mac Management, ... moreTool gauging system, Lap 4, Nose-R 2B, User task 2, Exp. Auto champfering. Serial Number 821 Year 1997 Location Livonia. MI
|
|
|
13.4" X 51.2" VICTOR-TAICHUNG VTURN-A26/130 2-AXIS CNC TURNING CENTER new 2011
13.4" X 51.2" VICTOR-TAICHUNG VTURN-A26/130 2-AXIS CNC PRECISION TURNING CENTER General Specifications Capacity: Swing over bed 35.4" Limited by front door 31.5" Swing over carriage 27.6" Bewteen centers 53.5" Max. Turning dia. 16.5" Std. Turning dia. 13.4" Bar capacity 2.95" Travels: X Axis stroke 8.3" + 1.97" Z Axis stroke 51.2" Spindle: Max. Spindle Speed 3500 RPM Spindle nose(Chuck) A2-8(10" Spindle bore 3.4" Bearing inside dia. 5.1" Turret: No of tools 12 Tool shank size.98" Max. boring bar dia. 1.97" Exchange time(T-T) 03 sec Exchange time 1.05 sec(Adjacent) Including disk up& down) 1.44 sec(opposite) Tailstock: Quill dia. 4.3" Quill taper MT#5 Quill stroke 3.94" NOTE: Hours 570 This Machine Was Manufactured New 2008 and Installed New ... more2011 2 Stock 12 3 SERIAL NUMBER 4 NEW 5 GENERAL SPECIFICAITONS: CONT.Feedrate: Rapid feedrate X/Z 24/24(B:15) m/min Cutting feedrate X/Z 0-1260mm/min Motor: Spindle motor B200Mi-15/22 kW Feed servo motor X:3.Z;4(B:3)kW Coolant: 14.2" Tank Capacity 16.1" Machine Dimensions(approx. 216"x83"x76" H Machine weight(approx) 16.720 LBs NOTE: REPLACEMENT PRICE $125,000.00 Watch Video: Motor Specifications Not Available Equipped With Fanuc OI-TD CNC Control 10" Kitagawa B210 3-Jaw Chuck 12 Position turret with 3 ID Toolholders Programable tailstock Chip conveyor Automatic Lubrication Fully enclosed splash guards Coolant system Oil Cooler Serial Number HV2-1138 Year 2011 Location ON LOCATION o.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpl%7E3go7%3Eo-13ec9d94796-0xfb-
|
|
|
HAAS VF3 CNC 3-AXIS VERTICAL MACHINING CENTER (will ship worldwide)
HAAS VF-3 CNC 3-AXIS VERTICAL MACHINING CENTER General Specifications Travels X40" Y20" Z 25" Table Width18" Length48" Max. weight on table 3.500 lbs T-slots width.625" T-Slots center distance 3.15" Spindle Taper size CT40 Speeds50 to 7.500 RPM Ratios1:1.25 High. 3.2:1 Low Bearings ABEC class 7 Bearing lubrication air/ oil injection Rapid feeds. X, Y, Z 500 IPM Weight(est) 12.500 lbs Overall dimensions 118"Wx96"FBx102.5"H Motor Specifications 15 HP Spindle drive motor 3 HP Axis motors Equipped With Haas 32 bit CNC controls with CRT screen 20 Position automatic tool changer 2-Speed gear box Floppy disk Rigid tap Serial Number 2419 Year 1993 Location PROSPECT HEIGHTS. IL video:
|
|
|
MORI SEIKI MODEL ZL-25A/500 4-AXIS CNC TURNING CENTER, cnc lathe, will ship worl
MORI SEIKI MODEL ZL-25A/500 4-AXIS CNC TURNING CENTER General Specifications Swing over bed 20.5" Swing over cross slide 13.8" Between centers 25.4" Max. machining diameter 10.2" Max. machining length 21.7" X-Axis Up:6.3"1.2"+5.1" Z-Axis Up:23.2"Down:23.2" Spindle speed 42-4200 RPM Spindle nose JIS A-6 Hole thru spindle 2.4" Spindle I.D. 4.3" Shank height for square tool 1.0" Shank diameter for boring bar Max. 2.0" Rapid feed rate(Z-Axis) 590.6" Tailstock stroke 23.2" Tailstock quill taper MT3 Tailstock quill stroke 3.1" Electric power supply 40 Kva Machine Weight(approx) 15.400 Lbs NOTE: CUTTING HOURS 6,064 Motor Specifications Not Available Equipped With Mori/Fanuc MSD-516(Fanuc 16T) CNC controls Programable tailstock(2) Turrets Misc. turret toolholders ... moreCollect chuck Chip Conveyor Splash guards Serial Number 654 Year 1995 Location PROSPECT HEIGHTS. IL Video:
|
|
|
49" X 49" K&T (G&L) ORION 2300 4-AXIS CNC HORIZONTAL MACHINING CENTER GIDDINGS
49" X 49" K&T(G&L) ORION 2300 4-AXIS CNC HORIZONTAL MACHINING CENTER WILL SHP TO YOUR LOCATION. CALL FOR FREIGHT RATE General Specifications 1250mm X 1250mm(49" x 49" Pallets Standard Travels: X-Axis 1500 mm(59" Y-Axis 1500 mm(59" Z-Axis 900 mm(35.4" Flood and mist coolant to include all standard features with the following options: 50 Taper"V" Flange Spindle Coolant-thru-spindle. High pressure 1000 PSI Full Rotary 4th axis Chip conveyor/elevator 15-5000 Spindle speed with keylock Standard chip/coolant enclosure 100 Tool storage magazine XT-Spindle probe without post. With operating system Tool gauge system Calculated fixture offsets U-Axis Drive& Operating System K&T Gemini D CNC Controls NOTE: MUST SELL PRICE REDUCED FROM $99.500.00 Motor Specifications 50 HP Main drive motor ... more3/60/460 V Equipped With Not Available Serial Number NA Year 1991 Location ON LOCATION
|
|
|
20.5" X 65" VICTOR-TAICHUNG VTURN-46/165 2-AXIS CNC PRECISION TURNING CENTER
20.5" X 65" VICTOR-TAICHUNG VTURN-46/165 2-AXIS CNC PRECISION TURNING CENTER General Specifications Machine Capacity: Swing over bed 32.3" Std. Turning dia. 20.5" Max. Turning dia 28.7" Swing over carriage 20.5" Center distance 68.9" Axis feeds: X Axis travel 14.4"x.98" Z Axis travel 65.0" Rapid feed X& Z Axis 472/590 IPM Cutting federate 0-49.6 IPM Spindle: Spindle nose(chuck) A2-11(15" Max. spindle speed 1500 RPM Spindle motor power 40/50 HP Bearing inside dia. 7.1" Spindle bore 4.8" Hole through draw bar 4.3" Turret: No. of tools 10 Tool shank size 1.26" Max. boring bar dia. 2.36" Exchange time(T-T) 1 Tailstock: Quill dia. 5.9" Quill stroke 5.9" Quill taper MT#5 Tank capacity 250 Power requirements 64 Kva NOTE: 410 HOURS- THIS MACHINE IS LIKE ... moreNEW! New Replacement Price $225.000.00) Watch vide: Motor Specifications Not Available Equipped With Fanuc Oi-TD CNC Control.15" Kitagawa B15 3-Jaw Chuck, 10 Position Turret with 3 I.D. Tool Holders, Programable Tailsock, Chip Conveyor,Automatic Lubrication, Fully Enclosed Splash Guards, Coolant Sytem& Oil Chiller Serial Number MB1483 Year 2011 Location ON LOCATION
|
|
|
3.150" CONNI MODEL STA 80 CNC COLD SAW SYSTEM WASH DRY (WILL SHIP)
3.150" CONNI MODEL STA 80 CNC COLD SAW SYSTEM WITH AUTOMATIC DEBURRING. WASH& DRYING SYSTEM General Specifications Capacity: round 3.150/80mm Capacity: square 2.756/70mm Blade diameter 12.402/315mm Variable blade speed 20' Bundle bar feed loader Motor Specifications Not Available Equipped With Burrmaster In-line deburr. S/N 8359-30-63 Caber Impianti In-line barrel wash& dry. S/N 31/01 20' Automaticbundle loader System includes conveyors and magazine to auto-load directly from Conni saw into the Burrmaster deburr machine. Parts also automatically flow from Burrmaster into heated barrel washer& dryer CNC feedout is programmable. With 18" Max. feed, does not have to regrip to feed out multiple short parts. I.e. 6) 3" parts Year 2001 Location ON LOCATION
|
|
|
5/8"/16MM TRAUB TNL16G CNC SLIDING HEADSTOCK (SWISS TYPE) AUTOMATIC WITH MAGAZIN
5/8"16MM TRAUB TNL16G CNC SLIDING HEADSTOCK(SWISS TYPE) AUTOMATIC WITH MAGAZINE BAR FEEDER General Specifications The TNL16G series Sliding Headstock Mill/Turning Centre was specially designed for machining of bar stock up to 16mm diameter. With 7 NC- axies, Two work spidles and two 6 station turrets(All turret tooling can be driven) The machine is equipped for precision high speed production requirements. With the included"Y" axis on the opposite spindle with an additional of 3 static tools for end working, all individual turning and milling requirments are covered. The tools of both turrets can be directed towards the main and opposed spindles together. Alternatively, either turret can be used to machine work piees at either the main or opposed spindles therefore offering optimal flexibility. For complete automation the machine ... moreis equipped with the high speed LNS Hydrobar Mini Spring 4 metre bar feed and magazine. Parts removal is via a hydraulic parts catcher for Parts up to 140mm long. This transfers the finished work piece to an integral parts conveyor for transporting the work piece out of the machining ara. Or optionally the removal of the parts can be through the opposite spindle for long shaft type components up to 500mm in length. Max. working deg for working with the bar loading magazine 16mm Max. work piece length 500mm Max. turning length(1 stroke) 200mm Spindle head useable(main spindle) 200mm Max. longitudinal travel(opposed spindle) 300mm Max. stroke Y-travel(opposed spindle) 155(+140/15)mm Speed range driven tools 200-5000 UpM/RPM Number of Axes 7 Main spindle drive(A.C. main drive with: 2.8/4.4. Kw Opposite spindle drive(A.C. Opposite spindle drive with: 1.9/3.05 Kw Main& Opposed spindles C Axis Number of turret stations 2 x 6 Static tool stations(3 fixed tool station for end working at the main spindle) Rotating tool drive both turrets Number of driven tool stations 2 x 6 Hydraulic chcking cylinder(hollow. Feed finger clamping mechanism) Through tool coolant 5 bar Main& O
|
|
|
13.4" X 33.5" VICTOR-TAICHUNG VTURN A26/85 2-AXIS CNC PRECISION TURNING CENTER
13.4" X 33.5" VICTOR-TAICHUNG VTURN A26/85 2-AXIS CNC PRECISION TURNING CENTER General Specifications Capacity: Swing over bed 35.4" Limited by front door 31.5" Swing over carriage 27.6" Bewteen centers 35.8" Max. Turning dia. 16.5" Std. Turning dia. 13.4" Bar capacity 2.95" Travels: X Axis stroke 8.3" + 1.97" Z Axis stroke 33.5" Spindle: Max. Spindle Speed 3500 RPM Spindle nose(Chuck) A2-8(10" Spindle bore 3.4" Bearing inside dia. 5.1" Turret: No of tools 12 Tool shank size.98" Max. boring bar dia. 1.97" Exchange time(T-T) 03 sec Exchange time 1.05 sec(Adjacent) Including disk up& down) 1.44 sec(opposite) Tailstock: Quill dia. 4.3" Quill taper MT#5 Quill stroke 3.94" NOTE: Hours 385 This Machine IS LIKE NEW! GENERAL SPECIFICAITONS: CONT.Feedrate: ... moreRapid feedrate X/Z 24/24(B:15) m/min Cutting feedrate X/Z 0-1260mm/min Motor: Spindle motor B200Mi-15/22 kW Feed servo motor X:3.Z;4(B:3)kW Coolant: 14.2" Tank Capacity 16.1" Machine Dimensions(approx. 216"x83"x76" H Machine weight(approx) 16.720 LBs NOTE: REPLACEMENT PRICE $115.000.00 Watch Video: Equipped With Fanuc OI-TD CNC Control 10" Kitagawa B210 3-Jaw Chuck 12 Position turret with 3 ID Toolholders Programable tailstock Chip conveyor Automatic Lubrication Fully enclosed splash guards Coolant system Oil Cooler Serial Number HV1-1157 Year 2011 Location ON LOCATION o.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpl%7E3go7%3Eo-13ec9d94777-0xf6-
|
|
|
30" X 60" SHIZUOKA B-15V CNC 50 TAPER VERTICAL MACHINING CENTER (WILL SHIP)
30" X 60" SHIZUOKA MODEL B-15V CNC 50 TAPER VERTICAL MACHINING CENTER General Specifications Table: Working surface 70 7/8" x 25 1/2" T-slot(width x number x pitch) 11/16" x 5" x 5" Loading capacity 3.300 LBS Max. travel longitudinal(X) 60" Cross(Y) 30" Spindle head: Nose taper NST50 Speed range(variable) Rpm 20- 5,000 Change of speed(Belt head) S-4 Digital direct command Max. vertical travel(Z) 20" Feed: Jog feed rate(X. Y, Z) 0- 80" Rapid feed rate(X. Y, Z) 472" Motors: Main spindle(AC inverter) KW 30 Min ATC: Tool storage capacity 24 Tools ToolCT 50 Weight24,200 LBS Motor Specifications Not Available Equipped With 71" x 21 1/2" Table Fanuc 15M CNC control 24 Position automatic tool changer Coolant tank& pump Splash guards Serial Number 73013 Year 1992 Location PROSPECT ... moreHTS. IL
|
|
|
Mighty Viper VMC 1000XP CNC 3-axis Vertical Machining Center with Renishaw probe
Mighty Viper VMC 1000XP CNC 3-axis Vertical Machining Center with Renishaw probe new 1997 TABLE SIZE 50" x 19.7" X AXIS TRAVEL 40.6" Y AXIS TRAVEL 20.08" Z AXIS TRAVEL 19.7" RAPID TRAVERSE RATE- 590 ipm SPINDLE TAPER BT#40 SPINDLE SPEEDS 40-6.000 RPM SPINDLE DRIVE- AC TOOL CHANGER CAPACITY 24 STATIONS APPROXIMATE MACHINE WEIGHT- 15.000LBS Mitsubishi Meldas 520 CNC Controls, Renishaw MP10 Measuring Probe, 24 station tool changer, Haber oil temperature oil chiller, coolant system, full enclosure, coolant through tool, dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13ec9d94755-0xfd-
|
|
|
EMCO MAIER EMCOTURN 345 2-AXIS CNC LATHE TURNING CENTER with Iemca boss 542 bar
EMCO MAIER EMCOTURN 345 2-AXIS CNC LATHE TURNING CENTER WILL SHIP TO YOUR LOCATION. CALL FOR FREIGHT RATE General Specifications Work Area: Swing over bed 430mm(16.9" Swing over cross slide 210mm(8.3" Center distance 600mm(23.6" Max. turning diameter 220mm(8.7" Max. working length 510mm(20.1" Max. bar diameter 45mm(1.75" Travel: Travel in X 160mm(6.3" Travel in Z 310/510mm(12.2"20.1" Spindle: Speed range 0-6000 RPM Torque at spindle 78Nm(58 Ft/lbs) Spindle nose DIN 55026 A2-5 Spindle bearing(inside diameter) 80mm(3.1" Spindle bore 53mm(2.1" Main Drive: Power 15 HP Tool Turret: Number of tool stations 8 Shank VDI(DIN 69880) Quick change tool shank) VDI 30 Tool Cross-section 20x20mm(0.8"x0.8" Shank diameter of boring bars 32mm 91.3" Turret indexing speed 0.2 Sec. Feed Drives: ... moreRapid traverse rate in X/Z 20/24m/min(787/945IPM) Feed force in X 4000 N(899 lbs) Feed force in Z 6000N(1349 lbs) Accelerationtime 0.2 Sec. Position scatter Ps(to VDI 3441) X/Z 0.0030,005mm(0.00012/0.00020" Standard Tailstock: Quill diameter 60mm(2.4" Quill travel 120mm(4.7" Quill Bore taper MT4 Quill Thrust 5000N(1124 lbs) Cont. on page 2 Stock 1 2 3 SERIAL NUMBER 4 NEW 5 2 GENERAL SPECIFICATIONS: cont. Automatic tailstock: Tailstock travel 510mm(20.1" Max. thrust 6000N(1349 lbs) Travel speed Approx. 20m/min- 800 IPM) Tailstock bore taper MT4 Coolant System: Reservoir capacity 250Liter(65 Gal) Pump power 0.57/2,2kW(0.8/3.0HP) Power Ratings: Electrical power supply 17 kVA Compressed air 6 Bar(87 PSI) Machine Dimensions 88.6"x77.0"x76.4"H Machine weigth(Approx) 5,700 Lbs Motor Specifications Not Available Equipped With Fanuc 21TB CNC Control 3J Collet Chuck 8 Station 30 VDI Quick Change Tooling Click for Video 1.77" Max. Bar Capacity Programable Tailstock Coolant System Splash Guards Barfeed Interface 3/16"1 3/4" Iemca Boss 542 Magazine Bar Feed. S/N 95063001 Chip Conveyor Parts Catcher Serial Number R3GV03 Year 2000 Location
|
|
|
CITIZEN L16 L20 TYPE VII CNC SWISS SINGLE SPINDLE SCREW MACHINE,will ship
CITIZEN L-16/20 TYPE VII CNC SWISS TYPE SINGLE SPINDLE SCREW MACHINE General Specifications CNC control Cincom System IIC Max. machining diameter.79" Max. machining length per one chuck 7.87" Max. drilling diameter.315" Spindle speed 300-10000 RPM Max. chucking dia. of back-work spindle.63" Max. drilling diameter of back-work spindle.236" Max. pick-off length 2.756" Back-work spindle speed 100-5000 RPM Number of tools mounted 12 Turning6 Drilling3 Back-work drills 3 Tool size3/8"x 3/8"x 2-3/8" Motors: Back-work spindle drive 2.2/3.7 kW Required floor space 65"x 37" Approx. weight 5.000 lbs. video, Equipped With Mitsubishi CNC control 3 station live tooling Sub-spindle C-Axis LNS Hydrobar Mini Sprint bar feed. S/N 46699-96 Coolant system Splash guards(oversize spindle bushing. 20 mm) Serial ... moreNumber X9277 Year 1996 Location PROSPECT HEIGHTS. IL
|
|
|
LORENZ (LIEBHERR) MODEL LFS-282 CNC GEAR SHAPER WITH AUTO LOAD/UNLOAD SYSTEM
LORENZ(LIEBHERR) MODEL LFS-282 CNC GEAR SHAPER WITH AUTO LOAD/UNLOAD SYSTEM General Specifications Table diameter 320mm Table bore diameter/depth 150/350mm Max. table speed 30 rev/min Max. toothing diameter 280mm Max. diameter internal gearing 280mm Max. diameter inner teeth 250mm Outer diameter wheelbase cutter spindle to work table 280mm Radial velocity infinitely programmable 0-3.750mm/min Total weight(basic machine) 13000 Kg Ambient temperature 15-38deg C Machine stand: Axial travel 250mm Cutting spindle head carriage: Traversing-stroke position 250mm Max. traversing 1800mm/min Max. swivel angle 12 deg. Drive power 22kW Max. Module saping 6mm Spindle shaft diameter 90 Max. stroke 100 Stroke 80-1200 cycles/min Max. tool diamter 240mm Max. spindle speed 30 rev/min Axis angle adjustment head butt/vertical_0.5deg. Spindle: Min. Stroke 0 mm ... moreMax. Stroke 100mm Max.Verzahnbreite(straight teeth.Standard cams) 87mm Adjustment max. 600 mm/min Cont. on page 2 Stock 1 23 SERIAL NUMBER 4 NEW 5 2 Motor Specifications Not Available Equipped With Small hydraulic unit Hydrostatics. Lubrication Coolant system Indramat drives AC Control: Liebherr CNC LH90 V4 based on a PC-NC. Intregrated soft PLC control& decentralized PLC peripheral via profibus DP, Brand WAGO. PLC SIEMENS STEP 5 programming language Built-in floppy disk drive. INDRAMAT drives with SERCOS interface to the CNC. Screen: 10" Color TFT display Prompt: Prompt type 2 and dialog progamming with the use of WINDOWS- Metric system of measurement swithcable/inch Remote diagnostics Liebherr control LH90-V4 Recording and graphic display of internal control. Machine and driving conditions Error logging and error analysis and oscilloscope. Review and possible modification of NC program, Review and possible modifications of the PLC program PLC configuration(activate the option) Software update. Communication with the operator, Remote diagnostics of charge during the warranty. Operating& Control voltage: Operation voltage 415 V +/10% 50Hz +/2% Net form: TN system
|
|
|
GILDEMEISTER CNC TWIN 65 MULTI-AXIS CNC TURNING CENTER
IF THIS ITEMS REMIANS UNSOLD. IT WILL BE OFFERED AT PUBLIC AUCTION SALE ON CLOSING JUNE 7& 8. HUNDREDS OF ADDITIONAL MACHINES AND ACCESSORIES WILL BE OFFERED. VISIT FOR DETAILS AND INFROMATION. PREMIER ASSET RECOVERY GROUP. LLC 312-280-1234 GILDEMEISTER CNC TWIN 65 MULTI-AXIS CNC TURNING CENTER WITH SUB SPINDLE& LIVE TOOLING General Specifications Work area: Swing diameter 145mm Turning diameter normal 100mm Spindle distance 580mm Spindle 1: Max. bar diameter 65mm Chuck diameter 130/140mm Spindle 2: Max. bar diameter 65(45)mm Chuck diameter 130/140mm Main drive 1: Integrated spindle motor with C-axis Drive power(40/100% DC) 20/15 kW Rotational speed range 25-5600 RPM Main drive 2: Integrated spindle motor with C-axis Drive power(40/100% DC) 20/15(22/16.5) kW Rotational speed range 25-5600(25-5500) RPM Slide 1(top) Cross travel X/Longitudinal ... moretravel Z 220/320mm Rapid traverse speed X/Y/Z 30/15/30 m/min. Slide 2(bottom) Cross travel X/Longitudinal travel Z 120/345mm Rapid traverse speed X/Z 30/30 m/min. Slide 3(spindle 2) Cross travel X/Longitudinal travel Z 145/380mm Rapid traverse speed X/Z 20/30 m/min. Cont. on page 2 Stock 1 2 3 SERIAL NUMBER 4 NEW 5 2 GENERAL SPECIFICATIONS: cont. Tool mount 1 and 2: Number of tools 12 Number of powered tools 12 Drive power 40% DC 3.8 kW Rotational speed range 30-6000 RPM Weight(including control cabinet) approx. 5500 kg Motor Specifications Not Available Equipped With Siemens 840D CNC control 5500 RPM Chip conveor Coolant system. Mist collector, Parts catcher, Transformer, Parts conveyor Filter oil mist extraction Auto door option Work piece collecting device Interface for bar feeder Microcentric collet chuck(Main spindle) 7396 Hours 3-Jaw chuck KH 140/36. Berg(Sub-spindle) Recently serviced by DMG*NOTE: Machine purchase price $405.360.00* Serial Number N/A Year 2005 Location ON LOCATION
|
|
|
#10397 - GENESIS CNC ROBOTIC WELDING/GRINDING WORK CELL
GENESIS CNC ROBOTIC WELDING& GRINDING WORKCELL DESIGNED FOR STAINLESS STEEL DOOR PANELS Year 2006
|
|
|
39.4" X 39.4" PALLETS TOSHIBA BMC-100-E CNC HORIZONTAL MACHINING CENTER
GRAY MACHINERY COMPANY. 800-292-1493* 847-537-7700* FAX 847-537-9307 77 E. PALATINE ROAD* PROSPECT HEIGHTS. IL 60070-1811 WEB: www.graymachinery.com* EMAIL: sales@graymachinery.com PROPOSAL Stock 00010848 Quote# 278543 We are pleased to submit for your consideration: 39.4" X 39.4" PALLETS TOSHIBA BMC-100-E CNC HORIZONTAL MACHINING CENTER SERIAL NUMBER NA NEW 1994 GENERAL SPECIFICATIONS: X-Axis travel 78.7" Y-Axis travel 49.2" Z-Axis travel 47.2" Tool magazine capacity 60 ATC Pallet size(2 plts with t-slots) 39.4"x 39.4" Spindle motor 30 HP/30 min. 25 HP continuous Spindle taper CAT 50 Spindle speed 3-gear 15-5000 RPM Table load capacity 5.500 lbs Table indexing 1 degree Coolant thru spindle 310 PSI Machine dimensions 296"x213"x151" Machine weight(approx. 49.500 lbs MOTOR SPECIFICATIONS: 25/30 ... moreHP Main drive motor EQUIPPED WITH: Tosnuc 800 CNC control(2) 39.4" x 39.4" Pallets 60 Position automatic tool changer Coolant thur spindle 310 PSI PRICE: ON LOCATION* Visit our website at: http:www.graymachinery.com/grayinv.nsf/inventory+by+stock+number/10848 to view digital photographs of this machine. ALL SPECIFICATIONS SUBJECT TO VERIFICATION* Visit our web site at: http:www.graymachinery.com/tc.htm to view Terms and Conditions of Sale for this machine.
|
|
|
10' X 30' 6000 WATT TANAKA MODEL LMX-V30 TF6000B CNC LASER CUTTING SYSTEM
10' X 30' 6000 WATT TANAKA MODEL LMX-V30 TF6000B CNC LASER CUTTING SYSTEM General Specifications Laser output 6000 watts X-Axis travel 354" Y-Axis travel 120" Z-Axis travel 7.874" Track span 168" Overall track length 504" Cutting capacity(mild steel) 1" Cutting speed rate 40-196 IPM Rapid traverse(X-Axis) 945- 1968 IPM Motor Specifications Not Available Equipped With Fanuc 16IL CNC control T00 B 6000 Watt Laser Power Supply. Fanuc Auto height sensing Orion chiller MACHINE CAN BE INSPECTED UNDERPOWER Serial Number NA Year 2003 Location ON LOCATION
|
|
|
Mecktron 3K79900 TSV board from Miyano Mectron TSV-35 Lathe cnc INV=10604
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Mecktron 3K79900 TSV This part came from a Miyano Mectron TSV-35 Lathe Serial No. TSV350224 I bought the lathe from a bankruptcy auction. And I don't know if the machine was working at the time it was sold. Therefore, I do not know if this part is in working condition nor do I have the ability to test it. If you receive this part and it does not work, you are welcome to return it for a full refund, MINUS SHIPPING. You would be responsible for ALL shipping costs. I have many parts for sale from this same machine and am very interested in combined and bulk purchases for multiple items. I can ship freight on a pallet. This is preferable to me and would be an easier and safer way to ship the items. Also, this piece is fragile and has brittle/delicate parts that require extensive ... moreand careful packaging. That is why shipping may seem higher than expected. No foreign bidders. No exceptions. NO CANADIANS. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item.
|
|
|
Emco F1 CNC Mill Table Studs, One Pair, 1-3/16" Long 0426
Emco F1. PCMill 50 and PCMill 55 T-Nut Studs, Set of 2. Description: Studs for clamping tooling to Emco F1 series precision milling table. Condition: Very good condition. Sold as shown: Shipping: Charges shown are flat rate to US ONLY. I combine shipping when possible. I ship from Ann Arbor. Michigan 48103. That's all I can tell you. I'm not an engineer. I accept Paypal(preferred) Personal checks(domestic buyers only) and money orders. Please allow extra time for non-Paypal funds to clear. Returns: Policy Updated 2012 I offer a 30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a mistake in the listing. I offer a full money back refund(with shipping both ways) but you must return the undamaged item to me. I do not offer partial refunds and ... moreor replacements; I only offer my refund policy as stated above. In the event of loss or damage in shipping(that is out of my control) You agree in advance to cooperate so I can file an insurance claim for the loss or damage and issue a refund to you. If you win this auction. You will be expected to execute a paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately!
|
|
|
Emco F1 CNC Mill Accessory Clamp Set. PCMill 50 & PCMill 55 0426
Emco F1. PCMill 50 and PCMill 55 clamp set Description: Clamps for holding material to Emco F1 series precision milling table. Condition: Very good condition. Few signs of use. Sold as shown: Shipping: Charges shown are flat rate to US ONLY. I combine shipping when possible. I ship from Ann Arbor. Michigan 48103. That's all I can tell you. I'm not an engineer. I accept Paypal(preferred) Personal checks(domestic buyers only) and money orders. Please allow extra time for non-Paypal funds to clear. Returns: Policy Updated 2012 I offer a 30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a mistake in the listing. I offer a full money back refund(with shipping both ways) but you must return the undamaged item to me. I do not offer partial refunds ... moreand or replacements; I only offer my refund policy as stated above. In the event of loss or damage in shipping(that is out of my control) You agree in advance to cooperate so I can file an insurance claim for the loss or damage and issue a refund to you. If you win this auction. You will be expected to execute a paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately!
|
|
|
Emco Compact 5 CNC Lathe Stepper Motor Belt. Also works in Emco F1 Mill 0426
Emco Compact 5 CNC Lathe Stepper Motor Belt Description: Stepper motor belt for any Compact 5. Also works in Emco F1 CNC Mill. Condition: Good condition Sold as shown: Shipping: Charges shown are flat rate to US ONLY. I combine shipping when possible. I ship from Ann Arbor. Michigan 48103. That's all I can tell you. I'm not an engineer. I accept Paypal(preferred) Personal checks(domestic buyers only) and money orders. Please allow extra time for non-Paypal funds to clear. Returns: Policy Updated 2012 I offer a 30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a mistake in the listing. I offer a full money back refund(with shipping both ways) but you must return the undamaged item to me. I do not offer partial refunds and or replacements; I ... moreonly offer my refund policy as stated above. In the event of loss or damage in shipping(that is out of my control) You agree in advance to cooperate so I can file an insurance claim for the loss or damage and issue a refund to you. If you win this auction. You will be expected to execute a paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately!
|
|
|
CNC MILLING MACHINE MILLPORT 3 AXIS
MODEL 3 YH 42" TABLE 3 PHASE 220/440 CRUSADER 2 CALL FOR A SHIPPING PRICE.
|
|
|
4 Vexta Stepping Motor PK266-01A-C23 Robot CNC 2 phase.
Here are 4 Vexta Stepping Motor PK266-01A-C23 Robot CNC 2 phase These motors are new with wire modifications and have never been used. But are being sold as used. 13
|
|
|
CNC CAT50 CAT 50 End Mill Tool Holder & Tool/Valenite
SEARCH OUR PRODUCTS CNC CAT50 CAT 50 End Mill Tool Holder& Tool/Valenite Product Description You are bidding on a used CNC CAT CAT 50 End Mill Tool Holder& Tool/Valenite. This item was not tested since we do not have the proper resources. Cosmetically it has worn marks and scratches from normal use. The pictures are of the actual items the winning bidder will receive. Only what is pictured comes with this auction. ITEMS INCLUDED: 1- TOOL HOLDER 1- END MILL TOOL 1- RETENTION KNOB SPECIFICATIONS OF HOLDER: MANUFACTURER: UNKNOWN TAPER: CAT50 V-FLANGE PROJECTION: 1.5" THRU-THE-SPINDLE-COOLANT CAPABILITY SPECIFICATIONS OF TOOL: MANUFACTURER: UNKNOWN LRTI REV. D T-110640 AS38427 DIAMETER OF CUTTING END: ~2.4" DIAMETER OF TOOL SHAFT: ~1.85" LENGTH(AS SEEN) ~6-5/8" THRU-THE-SPINDLE-COOLANT CAPABILITY SPECIFICATIONS OF ... moreRETENTION KNOB: MANUFACTURER: VALENITE PT 536-45C 10/30772/02 THRU-THE-SPINDLE-COOLANT-HOLE SKU: I47L009 Warranty Information Warranty covers defects and malfunctions that we have not described. The warranty period starts the day the item is delivered to your shipping address. Warranty does not cover compatibility issues. Consumable parts or software. Contact Info Business Hours- toll free: 877) 328-9236- local: 512) 933-0081- fax: 512)873-0745 Monday to Friday from 8:30 am to 5:30 pm CST Closed on Saturday and Sunday Company Policies PayPal Must ship to a confirmed address, Visa/MasterCard/Discover/Amex US and Canadian issued cards only. Must ship to the billing address of the credit card. Orders over $1.000 require a signed. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. We do not allow the buyer to arrange their own shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. The buyer is responsible for any customs. Duties, taxes, broker fees, etc that
|
|
|
MOOG TRI AXIS DRIVE PCB BOARD MODULE H73300 CNC (C14-5-10E)
This is a MOOG TRI AXIS DRIVE PCB BOARD MODULE. PN:H73300 THIS ITEM IS GUARANTEED TO BE IN WORKING ORDER UPON ARRIVAL. PLEASE DISREGARD THE NUMBERS IN PARENTHESES AT THE END OF THE DESCRIPTION IN THE TITLE. THESE ARE FOR OUR INTERNAL REFERENCE. WE OFFER A 14 DAY RIGHT OF RETURN. We accept Paypal. Visa& Master card. Payment must be made within 3 days of item ending. We take great care in packaging your products and use only the best materials. We usually ship USPS for smaller domestic shipments. For larger items. We use FedEx or UPS. We also ship freight for very large and heavy items. In order to give you the lowest possible rate, we combine shipping charges on multiple orders. WE SPECIALIZE IN INTERNATIONAL SHIPPING. International Shipping rates will be higher than the rate posted here. Please contact us for international rates. All ... moreitems are guaranteed to be in proper working order upon arrival. Unless specified otherwise in the description. We have been in the Industrial and manufacturing supply field for over 7 years and take pride in providing our customers with THE BEST CUSTOMER SERVICE. We do our best to describe everything. If you have questions. Please feel free to email us. We strive hard to make sure our customers are happy. We use the appropriate packaging materials that are necessary when packaging your items. We hope that you will find your purchase satisfying. If by chance there is an issue with your item, please let us know right away. We are always ready to address any concern. Local pickups can be made by appointment only at our warehouse at 3401 Industrial lane, Suite A Broomfield, Co 80020.
|
|
|
MOOG CMOS RAM PCB BOARD MODULE H72719 CNC (C14-5-7E)
This is a MOOG CMOS RAM PCB BOARD MODULE. PN:H72719 THIS ITEM IS GUARANTEED TO BE IN WORKING ORDER UPON ARRIVAL. PLEASE DISREGARD THE NUMBERS IN PARENTHESES AT THE END OF THE DESCRIPTION IN THE TITLE. THESE ARE FOR OUR INTERNAL REFERENCE. WE OFFER A 14 DAY RIGHT OF RETURN. We accept Paypal. Visa& Master card. Payment must be made within 3 days of item ending. We take great care in packaging your products and use only the best materials. We usually ship USPS for smaller domestic shipments. For larger items. We use FedEx or UPS. We also ship freight for very large and heavy items. In order to give you the lowest possible rate, we combine shipping charges on multiple orders. WE SPECIALIZE IN INTERNATIONAL SHIPPING. International Shipping rates will be higher than the rate posted here. Please contact us for international rates. All items ... moreare guaranteed to be in proper working order upon arrival. Unless specified otherwise in the description. We have been in the Industrial and manufacturing supply field for over 7 years and take pride in providing our customers with THE BEST CUSTOMER SERVICE. We do our best to describe everything. If you have questions. Please feel free to email us. We strive hard to make sure our customers are happy. We use the appropriate packaging materials that are necessary when packaging your items. We hope that you will find your purchase satisfying. If by chance there is an issue with your item, please let us know right away. We are always ready to address any concern. Local pickups can be made by appointment only at our warehouse at 3401 Industrial lane, Suite A Broomfield, Co 80020.
|
|
|
MADE IN USA CAT50 3/4" END MILL HOLDER CAT 50 CT50 CT EMH CNC MILL LOT C1338
LOT C1338(1) CAT50 3/4" END MILL HOLDER MADE IN USA WE HAVE MORE CAT50 LISTED AND WILL BE LISTING MORE. ANY QUESTIONS CALL 937-320-2298 PLEASE Check out my other items! Be sure to add me to your favorites list! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13eceba05f3-0x107-
|
|
|
Accurpress Press Brake 100Ton x 12' with ETS 3000 CNC X/R backgauge
ACCURPRESS 100 Ton x 12' CNC Hydraulic Press Brake Mod: 710012• Serial No. 4749• Year 1998 Stock No. 4998C· Capacity(tonnage) 100· Bed length. 12' Distance between centers. 124" Stroke. 8" Open height. 14" Closed height. 6" Throat. 10" Electrics: Voltage. 230 Currently Phase. 3 Cycle. 60· Dimensions: Length. 160" Width. 47" Height. 86" Weight(approximate) 16.500 Lbs. ETS 3000 CNC Graphical Control Variable Bending Speed, CNC X and R axis Backguage
|
|
|
Pratt & Whitney Horizonal CNC Mill
We are selling this Pratt& Whitney Horizonal CNC Mill. It has a Fanuc 6m Control. 12" rotary table(4th axis) Cat 40 taper with tool changer. Under power, can see it operate. Could use a little paint, or a cleaning, but still holds.0002 tolerances. Buyer is respondsible for loading. E-mail me at CNCMachining90@comcast.net or through E-bay if you have an questions Machine is being sold as is. Where is.
|
|
|
Yam CK-2 CNC Lathe
We are selling this Yam CK-2 CNC Lathe. It has a Fanuc OT Control. 10" Chuck Turret, and ProgramableTailstock. The machine is in good condition.The outside of the machine could use a little touch up paint, other than that, it's in good shape.This machine is located in Washington State. Buyer is respondsible for loading. E-mail me at CNCMachining90@comcast.net or through E-bay if you have an questions Machine is being sold as is. Where is.
|
|
|
VDI 50 MAZAK SLANT TURN CNC LATHE 2" BORING BAR TOOL HOLDER ST28/35N
MAZAK 2" BORING BAR HOLDER PAT NO. IN-22642 VDI 50 SHANK Very good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, credit card, and PayPal accepted. FREE USPS Priority Mail shipping with signature confirmation* If you have any questions regarding this item. Please give us a call at 440-343-4419 and we will be happy to assist you. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ecf37328f-0x102-
|
|
|
Fanuc CNC AC Servo Unit 200V 185V Input Type L Series 1, 2, 3 Maintenance Manual
Our internal inventory number on this product is LHM8# MN18-J/2. OUR RETURN POLICY. Due to the nature of this item. All sale of manuals are final! If you have a problem with the item upon receipt contact us immediately and we will attempt to address the issue! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. The item in the pictures may not be the item you will receive, since we have Multiple Quantities of this unit. This is just a rep. of what you will be receiving. You are bidding on a GE Fanuc Automation Digital AC Servo Systems Maintenance Manual. This manual describes the troubleshooting. ... moreAdjustment, and setting method related to the servo amplifier and servo controller in NC equipment employing a digital AC servo system. This manual Describes the following products: Fanuc AC Servo Unit(200V Input Type) 1. 2, and 3-axis amplifier. Fanuc AC Servo Unit(L Series) 1-axis amplifier. Fanuc AC Servo Unit(185V Input Type) 1. 2, and 3-axis amplifier. Table of Contents: 1. General 2. Configuration 3. Troubleshooting 4. LEDs. Check Terminals and Setting Terminals on PCBs 5. Connection of the Discharge Unit 6. Kinds of Seperate Type Electric Discharge Unit Appendixes Publication Number: GFZ-65005E. Weight: 1 lb. Dimensions: 8.5" x 11" x.5" Copyright: 1990 It is(+/ 205 Pages. Seems complete and in generally GOOD used condition! These manuals ratings(Poor. Fair, Good) are based mostly on their usability for their information and partly on cosmetic condition! We will be listing many different types of manuals! If you aren't sure this will work for you. Please don't buy it. If there are any obvious deficiencies. We will always strive to let you know, but things can get overlooked. Please check out our Feedback. We are straight shooters! NOTE* FREE
|
|
|
CHEVALIER 2040 CNC MILL VERTICAL MACHINING CENTER
HomeTemplate For sale is a used CHEVALIER 2040 VMC. This machine is under power and in 100% working condition. There are no known issues with the machine. If you have any questions or would like to inspect the machine in person please contact us using the info below. SPECIFICATIONS: TABLE SIZE: 47.24" x 17.7" TABLE CAPACITY: 1100 LBS• SPINDLE NOSE TO PALLET TOP: 5.9" 25.6" X AXIS TRAVE: L 40.2" Y AXIS TRAVEL: 19.7" Z AXIS TRAVEL: 19.7" RAPID TRAVERSE RATE X. Y& Z AXES: 590/590/472 IPM• CUTTING FEED RATE: 0.04- 300 IPM• SPINDLE TAPER: CAT 40• SPINDLE SPEEDS: 60- 6000 RPM• SPINDLE MOTOR: 15 HP• TOOL CHANGER CAPACITY: 20 POSITION ATC• MAXIMUM TOOL WEIGHT: 15 LBS• MACHINE WEIGHT. APPROX. 11.000 LBS• MACHINE DIMENSIONS. APPROX. 107" x 91" x 99" EQUIPPED WITH: FANUC O-M CNC CONTROL, RS-232C ... morePORT INTERFACE FOR DNC OPERATION, RIGID TAPPING(SYNCHRONOUS/ SOLID TAPPING) REMOTE JOG HANDLE, ALL AVAILABLE MANUALS. WORK LIGHT, STANDARD COOLANT SYSTEM WITH TANK& PUMP Chip conveyor is not included. If you are interested please contact us. specs are to the best of our knowledge If you have any questions or would like to come and inspect the machine you can Contact us at: Sales(at) BasaranGrinder.Com or Call Seref@ 631-273-3030 x.502 Shipping and handling costs are buyers responsiblity. We can provide trucking quotes if necessary but contact us first before buying. Also we will load the freight for free.
|
|
|
~2~ HARDINGE CHNC 8 STATION TOP PLATES CNC LATHE
~2~ HARDINGE CHNC 8 STATION TOP PLATES CNC LATHE, 2 HARDINGE CHNC TOP PLATES 8 STATION 8" APPROX 2.050 THICK. BOTH A LITTLE ROUGH AS SHOWN. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
HARDINGE 8 STATION TOP PLATE CHNC CHUCKER CNC LATHE
HARDINGE 8 STATION TOP PLATE CHNC CHUCKER CNC LATHE, HARDINGE 8 STATION TOP PLATE CHNC 8" OCTAGON. 2.050 THICK. GOOD CONDITION. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
Hardinge Conquest T51 CNC Lathe Tool Holder - VL-30 Round Shank Boring 1-1/2" ID
Hardinge Conquest T51 Tool Holder VL-30 Round Shank Boring Tool Holder(1-1/2" ID) Contact us if you have any questions. Shipping is FREE to US lower 48. Anywhere else please contact us for shipping quote. Thank You.
|
|
|
CNC MACHINING MILLING SIMULATOR software GCODE G-CODE TUTORIALS
If there is a specific type of CAD/ CAM CNC software which you need. Message me with the name. CAD/ CAM system CNC Software package Supplied + Installation instructions + License. There are many different types of CAD CAM programs. Just let me know what program you need. FREE Shipping: Worldwide di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13ed2e6ac5d-0xef-
|
|
|
5 axes CNC cutter/grinder
5 axes CNC cutter/grinder PAS-600 Junger N&W PSA-600 with a Fanuc General Numeric GNII Series Controller Worked great last time we used it.
|
|
|
CINCINNATI CL-6 CNC LASER CUTTING MACHINE
1999 CINCINNATI CL-6 CNC LASER CUTTING MACHINE. 5' X 10' Loading table 2000 WATT Serial Number: 51357 EQUIPPED WITH GE FANUC 160I-L CONTROLS. SHUTTLE TABLES, GE FANUC MODEL C200C POWER SUPPLY, KOOLANT KOOLER MODEL HCV-7500-PR-NF-FILT WATER CHILLERS. MACHINE SHOWS 7535 HRS ON THE COUNTER. CUTS UP TO 5/8" MILD STEEL. MACHINE HAS BEEN REGISTERED WITH CINCINNATI. WE HAVE ALL MANUALS AND RECORDS ON THIS MACHINE. WE CAN ARRANGE TRUCKING OR YOU CAN USE YOUR OWN CARRIER. THERE WILL BE RIGGING FEES ASSOCIATED WITH THE SHIPPING OF THIS ITEM IF WE ARE REQUIRED TO LOAD THE MACHINE. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO CALL US AT 515-832-5701.
|
|
|
DAHLIH MCV-1450 CNC Vertical Machining Center Mill Cat 50 Taper Fanuc 18 Dah lih
DAH LIH MCV-1450 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: MANUFACTURED NEW 1999 TABLE SIZE 62.9" x 34.6" MAXIMUM PALLET LOAD 3.300 LBS SPINDLE NOSE TO PALLET TOP 7" 35" X AXIS TRAVEL 57" Y AXIS TRAVEL 29.5" Z AXIS TRAVEL 29.5" RAPID TRAVERSE RATE X/Y/Z/ AXES 787 IPM CUTTING FEEDRATE 0.04- 197 IPM SPINDLE TAPER CAT 50 SPINDLE SPEEDS(GEARBOX) 35- 3.500 RPM SPINDLE MOTOR 20 HP TOOL CHANGE CAPACITY 30 TOOLS MAXIMUM TOOL WEIGHT 33 LBS MAXIMUM TOOL LENGTH 13.8" MACHINE WEIGHT 22660 LBS APPROXIMATE DIMENSIONS 156" x 125" x 138" EQUIPPED WITH: FANUC 18M CNC CONTROL WITH CRT, RS-232C PORT INTERFACE FOR DNC OPERATION, HELICAL INTERPOLATION. RIGID TAPPING, 2 SPEED GEARED HEAD. SPINDLE CHILLER, ALL BOX WAY CONSTRUCTION, STANDARD COOLANT SYSTEM WITH TANK& PUMP, ALL AVAILABLE MANUALS. ... moreLOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We have a knowledgeable staff that will strive to deliver quality products and services based on your needs, and assist you from st
|
|
|
COBALT DRILL BITS N#21 QTY 25 pcs CNC MACHINE
Up For Auction Qty: 25 each cobalt drill Bits The sizes are decimal number 21 decimal equivalent inches.1590 These tools are like new many in unused conditions as well as used These drill bits are MADE IN USA The drill bits are stamped with name The shipping rate is to the United States only, No international shipping I offer discounted rates for winners of multiple auctions I will list similar lots in the coming days If you looking for additional numbered drill bits please contact me before you pay and I will let you know if I have it or not Please see my other auctions
|
|
|
3" ADJUSTABLE BORING HEAD 3/4" TOOL BORE 1-1/4" SHANK CNC LATHE CNC MILLING
3" ADJUSTABLE BORING HEAD 3/4" TOOL BORE 1-1/4" SHANK CNC LATHE CNC MILLING, 3" ADJUSTABLE BORING HEAD 3/4" TOOL BORE. 1-1/4" REMOVABLE SHANK. MFG USA. VERY GOOD CONDITION. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
BULLERI MACHINE FPF-3232-2P CNC ROUTER 3-AXIS YR.2005 DESKTOP 1600x2600MM TWIN
BT# 14126 TJ-099.1Y You are looking for: BULLERI BREVETTI FPF-3232-2P CNC ROUTER 3-AXIS YR.2005 DESKTOP 1600x2600MM USED AND TESTED ITEM. IN EXCELLENT CONDITION! 30 DAYS WARRANTY! Manufactured by: BULLERI BREVETTI. Additional info: CNC ROUTER Model: FPF-3232-2P Type: 3 Axis Year: 2005 TWIN TABLE Desktop Size: 1600 x 2600 mm The distance between the table and the portal: 240 mm Moving the axes x. Y, z 4400x3350x300 mm 12 positions TWO spindle Rotating speed: 500-24000 giri/ min Axis Movement: 5.561.8 hours Power On: 9.596.9 hours Vacuum pumps: 10.210 and 10,211 hours Vertical Router 1: 1.298.4 hours Vertical Router 2: 6.528.5 hours TEST VIDEO Click here Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 5 business days We ship with: Powered by
|
|
|
CNC Router Kit Mill Machine Table Travel 24"x24" Milling with Spindle VFD
COMPLETE CNC ROUTER KIT! This is a 24"x 24" x 4.25" CNC KIT. It's milled from 6061 aluminum. 20 mm rods, two precision forged double bearing blocks, and an oil flush connector on each axis. Supplied with grade 8 bolts; 16mm Ball Screws with bearings and a nut on both ends to relieve stress on the motors and hold the precision. This unit is a kit, which means the X&Y will not be assembled. The Z will be assembled and simple tools will be needed to put the X&Y together. SPECS: X&Y&Z 20mm rods and bearings X = 24 inch table APPROX 30 inches Y = 24 inch table APPROX 30 inches Z = 4 ¼ inch X. Y and Z 16mm Lead 5mm Ball Screws Accuracy.001 3 = Nema 23 270 oz stepper motors 3 = precision motor couplers 1 = 4 axis's controller 3.5 amp 1 = 24v. Power supply 1 = db25 cable 1 = Spindle mount for supplied Spindle ... moreHere's the"Low Down" on this unit. PLEASE READ EVERYTHING! I purchased the kit here on Ebay from Ed. A reputable dealer that has been always eager to help. I decided to go a different direction and get a bigger machine. This machine is about 1 year old but has only been assembled for 6-7 months and only used twice to cut a couple of test pieces on wood. I had also purchased a 1HP water cooled spindle from UGRACNC and a 110V VFD to control the spindle. The spindle runs up to 24000 RPM and its supper quiet. Its brand new and never seen any water or a job. The VFD is top quality purchased from Wolf Automation and its also brand new. I will also supply the hose for the spindle and the water pump(if I can find it) I have decided to keep the original motors and controller and power supply that way the winner will get new stuff. Only thing not supplied are the limiy switches that are sen on the pics but they are not good so I got rid of them. Brand New Nema 23 270oz stepper motors Brand New 4 axis's controller 3.5 amp Brand New 24v power supply Plus the cable is also new(25ft) A few other parts are also new and wrapped still. This unit will take an evening to pu
|
|
|
Yaskawa JANCD-SP24 CNC Board [PZ7]
ITEM DESCRIPTION. Description: PCB Function Keys for 14 inch CRT Panel Unit, Category: CNC Board, Product# JANCD-SP24, Condition: Refurbished Precision Zone technicians are experts when it comes to electronic repair. In addition to replacing components. We can diagnose and make repairs at board level. All repaired electronics and printed circuit boards are thouroghly tested in simulator stands and real machines, cleaned and repackaged according to your request. Also we implement the entire NC control rack repair. This item carries Precision Zone standard 90 day Ebay warranty on parts and labor from date of its sale. Terms. Precision Zone ships worldwide and accepts PayPal and most Credit Cards. For Customer Service call 800-551-4420 or 847-465-9060. All items are priced each. All items are subject to availability and passing our QA inspection. ... moreNET Terms available to customers of satisfactory credit after approval. To avoid delay in filling orders. Purchasers without previous experience with Seller should remit cash, PayPal, or pay with VISA/MasterCard. Customers may be subject to Illinois sales tax. Repair Services Turnaround Time. Standard repair lead time is 5-10 business days after approval. Rush services are available. Ranging from same day to 72 hour rush. Please contact us for pricing and availability on rush repair services. Exchange program available with a wide range of drives on hand at any given time. Same day rush services also available on exchanges. Packaging and Handling. All items are custom packaged to ensure proper safety of unit(s) Items above 80lbs require custom shipping cartons for protection. Customers responsible for additional freight charges. Shipping. Free Domestic(Mainland U.S.A. Excluding Alaska and Hawaii) Shipments: All domestic shipments under 70 lbs are processed via free UPS Ground Service. Domestic shipments over 70 lbs are processed via freight service. Freight and handling fees apply. Contact us for additional freight charges. Alaska. Hawaii and International Shipmen
|
|
|
Modig Profileline MD 7000 CNC Machining Center 1998
For Sale is a Modig Profile Line MD 7000 CNC Machining Center Serial Number PRO-980339 with all original manuals and literature. Priced to sell. Only the setting arbor for this machine comes with it as we have 2 machines to sell. Machine no longer under power. The Modig Profileline for aircraft extrusion longeron and stringer machining has become very popular among the world leading aircraft manufacturers. Companies like Boeing. SAAB, Airbus, Raytheon, and some subcontractors have already invested in a number of machines. The system floor space is small yet has the capacity for aluminum extrusions up to approximately 40’ The fixturing and tooling costs are small. Type of machine Machining Center- Vertical Make MODIG Type MD 7000 Year of manufacture 1998 Type of control Conventional Storage location Oklahoma City. OK Country of origin Delivery ... moretime immediately Freight basis ex Warehouse Technical details x-travel 700 mm y-travel 400 mm z-travel 500 mm table surface area 900 x 350 mm spindle throat 395 mm distance work spindle/surface of the table 100- 600 mm spindle taper ISO 40 tool diameter 105 mm table load capacity 400 kg spindle turning speed range 50- 6000 U/min spindle motor 10/ 15 kW feed X+Y 0- 24 m/min feed Z 0- 16 m/min total power requirement 18 kW weight of the machine ca. 4.1000 t dimensions of the machine ca. 3.70 x 3.10 x 3.20 m Additional information With HEIDENHAIN TNC 355 4-axis CNC-Dialog-Control with graphics and electronic hand wheel. Furthermore the machine ist equipped with: automatic TOOL CHANGER with TOOL STORAGE for 24 tools. AC-DC drive, ball roller bearings, chip conveyor, fully guarded and separate coolant unit. Accessories: Vertical CNC Rotary Table JONES& SHIPMAN mod. 8413(C-axis) with 3-jaw chuck RÖHM-200 and tailstock. 2 collet chuck arbors, 6 machine's setting elements, machine's documentation. Oklahoma Residents add 8.725% sales tax. All items listed are sold in“AS-IS/ WHERE-IS” condition. No warranty. Expressed or implied, applies to any items listed for sale b
|
|
|
MIYANO JNC 35 CNC LATHE - NO RESERVE AUCTION
ID# 90173 Machine Specifications: Max Machining Length. 18.5" Diameter of Spindle Face. 5.5" ID of Draw Tube. 1.41" Spindle Nose. A2-5. Spindle Speeds. 25- 5.000 RPM. Spindle Motor. 10 HP. X-Axis Travel. 5.75" Z-Axis Travel. 13.5" Rapid Traverse X. 315 IPM. Rapid Traverse Z. 354 IPM. Turret Positions. 8. Tailstock Max Stroke. 9.844. Tailstock Max Adj Pressure. 1.400 lbs. Equipped With: Fanuc 3T Control. Collet Chuck. Chip Conveyor. Chip Pan. Tailstock. All Available Manuals and Tooling. Machine Dimensions(Approx) 11ft(L) x 6ft(W) x 6ft(H) Machine Location: MI. Additional Information: Machine can be seen under power. Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of auction close. All items are sold"AS-IS. WHERE-IS" and with all faults. Buyer ... moreis responsible to coordinate pick up with seller and buyer is responsible for all freight charges. Seller will prep item for shipment and load onto buyer's truck. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Contact Information: Contact Jason Sanda at 847-497-9800 for any questions and for payment detail.
|
|
|
Enshu VMC-650 3-Axis Vertical Machining Center CNC Mill/Milling Machine
SKU: 2359628 A: 0013000000CXCfg O: 0065000000MkIsH PA: View Photo Gallery. Request Freight Estimate. Location: Auburn. WA 98002 Item Description. This is a no reserve auction for an Enshu VMC-650 3-Axis Vertical Machining Center CNC Mill/Milling Machine. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. This item is located on Boeing property in Auburn. Washington. Rigging charges for professional removal will apply. Please see details below. Overview: Make: Enshu Model: VMC-650 Type: Vertical ... moreMachining Center/CNC Mill Serial No: 327 Origin: Made in Japan Specifications: Maximum Travel: X-axis: 1300 mm(51.2" Y-axis: 650 mm(25.6" Z-axis: 560 mm(22.0" Distance from table-top to spindle: 200- 760 mm(7.9" 29.9" Distance from column front to spindle center: 700 mm(27.5" Table Size: L 65" x W 28" Maximum allowable weight of work: 1500 kg(3300 lbs) Spindle speed range: 10- 4000 rpm Spindle drive motor(30 min. 15 kW(approx. 20 HP) Spindle drive motor(continuous) 11 kW(approx. 15 HP) Feed rate(rapid; x. Y& z) 15000 mm(585.0"min Feed rate(cutting; x. Y& z) 12000 mm(472.4"min Magazine tool capacity: 30 tools Tool type: CAT50 Hours: Unknown Features: Yasnac Control Enshu Conversational System- Tomato 30-tool CAT-50 automatic tool changer magazine Renishaw MI7 Machine Interface Hydraulic oil unit Daikin OILCON oil cooler(AKS54AK) Dualube/LUBE spray cooling system Gusher fluid pump Some manuals to be provided(unknown type/quantity at time of listing) Dimensions& Weight: Overall: L 192" x W 131" x H 124" Weight: 30.000 lbs(estimated) Condition: Good overall- working at time of decommission The consignor h
|
|
|
Vacuum Table for CNC Mill 2" thk x 20" w x 44" long
Vacuum Table for CNC Mill 2" thick x 20" wide x 44" long Holes 13" x 39" 43 holes x 96 holes x 1/8" diam x 3/8" center lines with 1 1/12" diam hose connector and dial Vacuum Gage. ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3579 BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST shipping dimensions: 48" x 36" x 12" approx. 150 lbs
|
|
|
75 Ton x 10' Diacro Hydra Mech CNC Press Brake Model: 75-10 With WILA Crowning!
THIS MACHINE COMES WITH A $10.000 WILA CROWNING SYSTEM DIE HOLDER! Manufacturer: Di-Acro Model: 75-10 Specifications: Tonnage 75 Length Of Bed& Ram 120" Distance Between Housing 102" Ram Stroke 3" Shut Height 12" Ram Adjustment 4" Strokes Per Minute 23-34 Throat Depth 8" Dimensions(L x W x H) 120" x 44" x 103" Weight 13.700 Lbs. Equipped With: DRC CNC Backgauge and Select A Bend Two Speed Ram Power Ram Adjustment Electric Foot Pedal Horsepower: 10 Wila Crowning systems are characterized by their extremely compact design without any externally moving parts. Control often takes place automatically via a CNC drive motor integrated to the machine controller. Eliminating the. Need for the press brake operator to make adjustments for machine deflection.
|
|
|
HAAS 5C S5C CNC MILL INDEXER AND CONTROLLER 7 PIN PNEUMATIC CLOSERHA5C
This is a HAAS 5C Indexer head with controller and comes with a pneumatic collet closer. This is a used item and is fully functional. Great working condition and ready for use.
|
|
|
Micron 600III-4W-10 CNC Centerless Grinder
Liberty Machinery Company You are looking at: 1) USED- MICRON MODEL 600III-4W-10 DUAL SUPPORT. CNC CENTERLESS GRINDING MACHINE Serial No. 4016 New- 1995 LMC#19549 SPECIFICATIONS: Grinding Capacity(Minimum Diameter) 118" 3 mm) Grinding Capacity(Maximum Diameter) 3.9" 100 mm) Grinding Wheel Diameter(O.D. Maximum 24.016" 610 mm) Grinding Wheel Diameter(O.D. Minimum 19.685" 500 mm) Grinding Wheel Width 15.945" 405 mm) Grinding Wheel Hole(I.D. 12.000" +.016" +.004" 304.8 mm) Regulating Wheel Diameter(O.D. Maximum 12.992" 330 mm) Regulating Wheel Diameter(O.D. Minimum 10.630" 270 mm) Regulating Wheel Width 15.945" 405 mm) Regulating Wheel Hole(I.D. 8.000" +.008" +.004" 203.2 mm) Grinding Wheel Speed 40m/Second@ 1252 RPM Regulating Wheel Speed- Variable 20- 200 RPM Grinding Wheel ... moreMotor 30 HP(22 kW) Peripheral Grinding Wheel Speed- Maximum 2700m/Minute@ 1252 RPM Regulating Wheel Motor 3.0 HP(2.2 kW) AC Spindle Motor) Regulating Wheel Lower Slide Motor.04 kW(Servomotor) Grinding Wheel Dresser Infeed Slide Motor 0.1 kW(Servomotor) Feed Angle- Tilting Angle +5 Deg. to-1 Deg. Vert. Swivel) Horizontal Swivel Angle +/ 0.5 Deg. Approximate Floor Area for Installation 181"L x 173"W x 94"H 4600 x 4400 x 2400 mm Approximate Main Body Weight 15.435 Lbs. 7000 kg) EQUIPPED WITH: Fanuc Powermate CNC Controller Automatic Grinding Wheel Dresser Utilizing Servo Motor(or Manual) Regulating Wheel Dresser Utilizing Hydraulic Flow Control Knob and Template Tracing System Jib Set-Up for Wheel Change Over Barnes Model MPE-25 Coolant Filtration System GENERAL CONSTRUCTION: The Grinding Wheel Spindle Bearing Unit and the Regulating Wheel Spindle Bearing Unit are designed as a complete twin-grip type to furnish extremely high rigidity. Wheel Spindle Bearing Unit Both the Grinding and the Regulating Wheel Spindles are supported by the High- Precision Double-Row Cylindrical Roller Bearing at their both ends. While the thrust by the High-Precision Angular-Contact Ba
|
|
|
Aerotech XY Table 6" Travel Yaskawa AC Servo Motors ATS200 ES14622 Stage CNC
Aerotech XY Table 6" Travel Yaskawa AC Servo Motors ATS200 ES14622 Stage CNC Nice large precision XY table with Yaskawa AC Servo motors. These Aerotech tables are the best! Well sealed and very well made. Note the bolts to hook the tables together are not included. Also there is a dowel pin that is broken off(2nd to last pic) It was apparently how the XY table was mounted to a robot or something originally and shouldn't be a problem if just ground flat. This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with Fedex Ground. AK. HI PR to pay actual shipping. We care enough to take multiple pictures of our items for sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual ... moreitem for sale. Sold with a 14 day not DOA satisfaction guarantee. ZM2_gsrx_vers_486(GS 6.5.1(486)
|
|
|
Briney CNC Floating Tool Holder V40E-125-200 20238C
This is a used Briney CNC Floating Tool Holder Tool System. V40E-125-200 20238C. Any questions please feel free to email us! Payment- All payments are due within 3 days of the close of the auction. We only accept Pay Pal. Due to incidents in the past. If your payment is not recieved within 3 days the item will be relisted. Shipping- We only ship within the US. NO Intenational! Your item(s) will be shipped within 3 business days after we recieve your payment. Returns- All sales are final and all items sold AS IS! We of course want to make our customers happy so if there is a problem please contact us& we will do our best to try and fix it!
|
|
|
Walter HMC 150 CNC Grinder
DESCRIPTION Walter HMC 150 CNC Grinder Manufacturer: Walter Model: HMC 150 Year: Condition: Used Specifications: Model No. HMC 150 Serial No. 441 Volts 460 Phase 3 Hz 60 Date of Manufacture July 1990 Largest Motor Amps 2.7 Total KVA 13 Electric Dwg. No. G-4500-0297/D0 Dimensions Piece 1 36" wide x 49" high x 34" deep Piece 2 46" wide x 76" high x 55" deep Piece 3 57" wide x 65" high x 52" deep Maximum Work Diameter 7" Maximum Length Between Spindle&Tailstock 21" Work Table Size 35" x 5.13" Longitudinal Travel 14" Workhead(a-axis) Taper ISO 50 Maximum Number of Indexes 999 Center Height 5.315" Horizontal Swivel(Manual) 360 Degrees Vertical Swivel(Manual) +90 Degrees/ 25 Degrees Grinding Speeds 1700/3000/3400/6000 Grinding Wheel Size 4" Hole Diameter 1.25" ... moreMotor 1.5 Hp Electrics 230/460/3/60 Was Damaged In Wreck. Some Minor Damaged. For more information contact Carlton Carr at(843) 845-7433 or at carlton.carr@essindustrial.com We ship anywhere your freight handler or carrier. FOB Spartanburg SC 29303 Terms and Conditions SALES TERMS: All products are purchased under an as-is condition with no warranties or guarantees of any kind. PAYMENT INFORMATION: RBI ESS accepts Bank Wire(Transfer) PAYPAL, Certified Checks, Credit Card(3%Processing Fee) and cash in person. All items must be paid in full before they are shipped. SHIPPING INFORMATION: RBI ESS ships worldwide and uses all common carriers including USPS. DHL, FEDEX, UPS and truck freight. When requested RBI ESS will combine multiple orders to reduce shipping costs, if possible. LOCAL PICKUPS REQUIRE PAYMENT OF LOCAL SALES TAX, UNLESS EXEMPTION IS PROVIDED. Contact us@ 864 444-4348 or email ricky.ward@essindustrial.com for special shipping instructions or for scheduling a pick up at our location in Spartanburg SC. USA. RETURN POLICY: Our goal at RBI ESS is to please our customers. We do our best to describe each item accurately. If an item arrives damaged or incorrectly describe
|
|
|
XYcom,CNC Eagle Tastatur , 2x-091196
in a well condition- 2x XYcom, CNC eagle Tastatur, 091196 1x used-gebraucht-usado-Y- 1x nuevo-new-neu guter Zustand-el estado bueno de reparacion i sell it without a warranty and without hte right to give it back- please buy it only if you are agree- Puedo vender el producto en garantía y sin ningún tipo de exclusión, pero real- La venta es sólo para los Industrial PLEASE ASK FOR THE SHIPPING PRICE TO YOUR COUNTRY FOR ALL COSTUMERS: I SHIP ONLY WITH INSURENCE! n6gonr.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13ed65061e2-0xf1-
|
|
|
BLUMER MCB-41-CNC DIE CUTTER
BLUMER MCB-41-CNC DIE CUTTER Punches up to 1" thick- Paper. Gasket, Leather, Rubber, Poly Sold NEW for $250.000.00 Was previously used in the wine label industry. S/N 25-08-34 1998 Check out my! Be sure to add me to your!
|
|
|
Matsuura 4-Axis CNC Vertical Machining Center MC-1000V7DC
Matsuura 4-Axis CNC Vertical Machining Center MC-1000V7DC Matsuura Twin Spindle. 4-Axis CNC Vertical Machining Center Ref.76A-152 Model No. MC-1000V7DC Serial No. 910509533 New 1992 This is equipped with a Tsudakoma tandem(master& slave) 12" diameter horizontal/vertical 4th axis rotary table. Table Work Area: 55" x 22" X-Axis Travel: 41" Y-Axis Travel: 22" Z-Axis Travel: 22" B-Axis. Tandem Rotary Tables, Master& Slave: 360.000 Maximum Distance Spindle Nose to Table Top: 40" Throat Depth. Spindle Center to Neck of Machine: 23.62" Distance Between Spindle Centers: 20" Spindle Speeds. Gear Driven: 15- 4500 RPM Spindle Nose Taper: BT-45 Table Load Capacity: 3.300 Lbs. X. Y, Z Feed Rates: 0.1- 196 IPM X. Y, Z, Rapid Traverse Rate: 590/ 590/ 472 IPM Automatic Tool Changer: 2) 30-Position Recommended ... moreFloor Space: 193" W x 187" D Equipped With: GE/Fanuc 15M 4-Axis CNC Control with 9" CRT Tsudakomo 12" Diameter Tandem Rotary Tables Many Misc. BT-45 Tool Holders Operator's Control Station Operator's Manual Rigid Tapping 25 HP(18 Kw) AC Variable Speed Spindle Motor Approximate Net Weight: 21.000 Lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is res
|
|
|
JUNGNER CNC DRILL GRINDER, MODEL 450
JUNGNER CNC DRILL GRINDER. MODEL 450 CNC, S/N 88-019-02 SPECIFICATIONS LONGITUDINAL TRAVEL- 18" CROSS TRAVEL- 11" VERTICAL TRAVEL- 9" FIXED VERTICAL ADJUSTMENT- 4" TOTAL VERTICAL MOVEMENT- 13" WORK TABLE CLAMPING AREA- 31.5"x4.5" WORK TABLE SWING- +6 MAX. CENTER DISTANCE- 18" MAX. GRINDING DIA. 10.25" TAPER FOR WORKHEAD- ISO-50 GRINDING MOTOR OUTPUT- 2 HP GINDING SPINDLE SPEEDS- 1.400/2,800 RPM EACH DIRECTION- 3.500/7,000 RPM- 5.600/11,200 RPM PROGRAMMABLE FEED INCREMENTS- 00001" INTERPOLATION INCREMENTS- 000005" INDEX ACCURACY OF WORKHEAD- +30" MACHINE WIDTH- 92" MACHINE DEPTH- 93" MACHINE HEIGHT- 80" MACHINE WEIGHT- 4.675 LBS. EQUIPPED WITH
|
|
|
Hyundai HIT 8S CNC lathe with Siemens Control
This is not a perfect machine. However, we use it every day and it makes very good parts. It has a Kitagawa 6" chuck and a 1.97" spindle bore. It has a tooling spindle and not gang tooling. We have never used the tool setter so I do not know if it is functional or not. The machine comes with a tailstock and a Siemens 840C controller. It also includes a fully functional Turbo chip conveyor and has an ungraded coolant pump system. The monitor is rather weak(as all of these units were) however it functions properly. The machine weighs 5800 pounds and is 67" x 55" x 70. I has a very quick travel rate(1181 imp) which makes it great for repetitive smaller work. It can be seen under power at our location in Grand Rapids Michigan. The buyer arranges for all shipping.
|
|
|
1999 AKIRA-SEIKI PERFORMA V4 CNC VERTICAL MACHINING CENTER w/ MITSUBISHI CONTROL
aims 1999 AKIRA-SEIKI PERFORMA V4 CNC VERTICAL MACHINING CENTER w/ MITSUBISHI CONTROL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Akira-Seiki. This is a Performa CNC Vertical Machining Center in EXCELLENT condition. Model# V-4 Serial# 99VGN094-217 Date of Manufacture: 1999 Photos were taken on location. But machine will ship from our Irwindale, CA warehouse. Features: Mitsubishi High Speed Control w/ Lookahead. RS-232 Port. 20 Horsepower. 8,000 rpm, BT40 Taper Spindle. Large Box Way Column. Full Enclosure. State-Of-The-Art NR-Type Ways. Faster Rapids and Higher Cutting Feed Rates. 22-Station Carousel Automatic Tool Changer. Coolant System. Lubrication System. Specifications: Table: Work Surface Area: 47.24" x 18.89" Maximum Table Load: 2.866 lbs. Travels: X-Axis: ... more41" Y-Axis: 20" Z-Axis: 20" Spindle: Spindle Taper: BT40 Maximum Spindle Speed: 8.000 rpm Spindle Motor: 20 Horsepower. Automatic Tool Changer: Number of Tool Stations: 22. General: Electrical: 205- 235 Volt. Three Phase Overall Dimensions: 110" x 95" x 100" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 1999 AKIRA-SEIKI PERFORMA V4 CNC VERTICAL MACHINING CENTER w/ MITSUBISHI CONTROL 1999 AKIRA-SEIKI PERFORMA V4 CNC VERTICAL MACHINING CENTER w/ MITSUBISHI CONTROL 1999 AKIRA-SEIKI PERFORMA V4 CNC VERTICAL MACHINING CENTER w/ MITSUBISHI CONTROL 1999 AKIRA-SEIKI PERFORMA V4 CNC VERTICAL MACHINING CENTER w/ MITSUBISHI CONTROL 1999 AKIRA-SEIKI PERFORMA V4 CNC VERTICAL MACHINING CENTER w/ MITSUBISHI CONTROL 1999 AKIRA-SEIKI PERFORMA V4 CNC VERTICAL MACHINING CENTER w/ MITSUBISHI CONTROL 1999 AKIRA-SEIKI PERFORMA V4 CNC VERTICAL MACHINING CENTER w/ MITSU
|
|
|
SMW CNC INDEXER / TURN TABLE MODEL RT-3J W/CONTROLS SYSTEM 30
SMW INDEXER MODEL RT-3J W/CONTROLS SYSTEM 30 BASE PLATE 8" X 16" X 1" THICK 110 V ALL ITEMS SOLD AS IS. WHERE IS stock#2367 BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST.
|
|
|
MISCO Palm Abbe Digital 0-56 Refractometer CNC, Coolant & Sugars PA201 LIKE NEW!
Slightly used. But works just as it would as if it were brand new! Misco Palm Abbe Digital Refractometer Laboratory Precision in the Palm of Your Hand! MODEL PA201– 0-56° Brix Scale with nonlinear automatic temperature compensation The new Palm Abbe is a fourth-generation digital handheld refractometer that puts laboratory precision in the palm of your hand. Not just laboratory precision. But laboratory precision for the price of a traditional analog refractometer. It is exactly the kind of bold, cutting-edge technology you would expect from MISCO, the company that pioneered the digital handheld refractometer. The Palm Abbe refractometer is fast. Convenient, and easy to use. Simply place a drop or two of fluid in the well and press a button on the key-pad. The custom-designed microprocessor delivers a nearly instantaneous readout in ... morerefractive index, degrees Brix, or any one of a thousand different units of measure, allowing you to read directly in the units you desire. Nonlinear temperature compensation is automatic and insures that fluids read between 0 and 50 °C(+32 to 122 °F) are measured accurately. The large dual-line LCD display is easily read. Even in dim light, and removes the subjectivity associated with interpreting where a boundary line crosses tiny scale divisions. And, it is so easy to use! The user interface consists of two buttons, one to take readings and the other to step through various menu options. Calibration is automatic and does not require the use of special calibration solutions or tools. The Palm Abbe refractometer automatically calibrates itself to water and is ready to use in seconds. No more screws to turn and nothing to adjust. Beats the competition Palms Down! Palm Abbe has a wider range and twice the accuracy of the Pal-1. Compare the Palm Abbe to refractometers costing more than $1000. Digital Accuracy- Digital refractometers remove the subjectivity associated with reading traditional refractometers. Auto Temp Compensation- Palm Abbe features non-linear temperature
|
|
|
Takasawa V5 CNC milling machining center X 25.8 Y 19.8 Z 19.8 Z
Takasawa V5 CNC milling machining center X 25.8 Y 19.8 Z 19.8 Z clearance 24" to bottom of spindle Table size 18" X 48" 50 taper spindle/ BT tool holders included. Gear driven RPM 4000 BOX WAYS Tsudakoma Full 4th axis rotary table w/ center FANUC 6m control*Buyer to rig and transport* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13eda65a9ce-0xf8-
|
|
|
Prototrak CNC milling Machine TRM Trak Nice shape bed
Prototrak TRM Bedmill This machine is in Great shape check out the table. Thank you for your Business! God Bless!
|
|
|
MIYANO BNC 34C CNC LATHE - NO RESERVE AUCTION
ID# 90216 Machine Specifications: Max Machining Length. 7 7/8" Max Turning Diameter. 4 3/4" ID of Draw Tube. 1.47" Spindle Nose. Flat. Spindle Speeds. 170- 5.000 RPM. Spindle Motor. 10 HP. X-Axis Travel. 3 7/8" Z-Axis Travel. 11 3/8" Turret Positions. 6. Equipped With: Fanuc 3T Control. Collet Chuck. Chip Conveyor. Machine Dimensions(Approx) 59"L) x 100" W) x 67"H) Machine Weight(Approx) 5.290 lbs Machine Location: MI. USA Additional Information: Machine can not be seen under power. Description: Machine has a turret switch problem and is not running for that reason. Buyer is responsible for removal. Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of auction close. All items are sold"AS-IS. WHERE-IS" and with all faults. Buyer ... moreis responsible to coordinate pick up with seller and buyer is responsible for all freight charges. Buyer is responsible for removal. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Contact Information: Contact Jason Sanda at 847-497-9800 for any questions and for payment detail.
|
|
|
Lot of (3) 1/32 - 1/2 Poland CNC C&C c and c keyless chuck collets
Up for auction is this lot of 3 high quality CNC quick change keyless chuck collets. 7658-40 1/32 to 1/2. Poland. They are really nice. Thanks for looking and good luck!
|
|
|
BT50 CNC MACHINE'S TOOLING HOLDERS TECNARA 250-304-3 1/2" ENDMILL TOOL HOLDER
TECNARA BT50 250-304-3 1/2" ENDMILL TOOL HOLDER MADE IN JAPAN It is USED equipments. Not rebuilt or refurbished. You are urged to thoroughly inspect the equipment and complete your own due diligence before you buy or bid. There will be a 20% restocking or relisting fee for non completed transaction for customers wishing to back out of their winning bid or buy it. Thanks for visit our store! Shipping and Handling. Local Pickups: Buyers are responsible for all Shipping and Handling charges. An additional handling charge of $2 will apply to all invoices. Delicate and expensive equipment requires special handling to ensure its safe delivery. Will Call hours are Monday thru Friday 1:00pm till 4:00pm or email to us for local pickups. Return Policy: We offer a money back guarantee within 14 days of purchase on all eBay auction items with the ... moreexception of items that are listed in the“As Is” or“As Shown” condition. Buyers are responsible for all Shipping and Handling Charges. Claims: Please allow us the opportunity to correct any error. Mistake or issue associated with the purchase, before leaving any negative feedback, by contacting nickxni@yahoo.com and please allow ample time for response. Considering weekends and holidays. Information we will need： Contact name. Best time and number to reach you. Beside email address. An invoice number or an eBay item number. And brief description of complaint.
|
|
|
Romaxx CNC 3 axis Router Machine table 24X36 ballscrew With Extras Made in USA
Purchased new around a year and a half and ago and used less than eight hours use. Specifications can be found at http:romaxxcncrouters.com/romaxx-cnc-router-wd-1 extras include Computer and Monitor Cast Aluminum Bed Dust Shoe(has a repair made see pic 3 but is sound) Router Mount Porter Cable 892 Router MPG Handwheel Mach 3 Software Loaded Video of machine running
|
|
|
U.S.A!! KURT 6" ANG-LOCK HEAVY DUTY CNC VISE
aims U.S.A! KURT 6" ANG-LOCK HEAVY DUTY CNC VISE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in U.S.A by Kurt Mfg. This is a Kurt Versatile Lock CNC Vise in GREAT condition. The Versatile Lock vise is the industry's ultimate single station CNC vise. It offers ultra-precision function through these important design features: The original. Time proven Kurt AngLock design prevents parts from lifting upward under heavy clamping loads. The"pull-type" ... morejaw clamping reduces jaw stationary deflection by at least 80% The one piece vise body and stationary jaw provide greater strength while reducing weight. Features: Modular designed components for fast. Easy change-over to other versatile lock models. Integral coolant slot for tool room use. Will not interfere with side mounting. Body height matched to within 0.001" Cast in finger slot for easy handling in the stationary jaw. High precision vise design. Utilizes Kurtr Anglockr. Pull-type and I-beam body designs inductile iron construction. Produces the most rigid. Immobile part clamping available in a conventional vise. Specifications: Jaw Width: 6" Jaw Opening: 6" Throat Depth: 1-3/4" Overall Length: 14-3/4" Overall Height: 4-5/8" Max. Travel: 6" Jaw Deflection: 0.0001" Jaw Plate: 0.0001" Bed/Base: 0.0001" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.
|
|
|
Emco F1 CNC Mill DC Spindle Motor 0426
Description: Emco F1 Mill DC Spindle Motor with external brushes. Condition: Pulled from working unit. With Timing Gear and capacitor. Sold as shown Shipping: Charges shown are flat rate to US. Mexico, Canada, EU, UK, Australia and New Zealand. I combine shipping when possible. I ship from Ann Arbor. Michigan 48103. I accept Paypal(preferred) Personal checks(domestic buyers only) and money orders. Please allow extra time for non-Paypal funds to clear. Returns: Policy Updated 2012 I offer a 30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a mistake in the listing, I offer a full money back refund(with shipping both ways) but you must return the undamaged item to me. I do not offer partial refunds and or replacements; I only offer my refund policy ... moreas stated above. In the event of loss or damage in shipping(that is out of my control) You agree to cooperate so I can file an insurance claim for the loss or damage and issue a refund to you. If you win this auction. You will be expected to execute a paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately!
|
|
|
MORI SEIKI SL25 CNC TURNING CENTER ID TURRET TOOL BLOCK
1-1/2" TURRET TOOL HOLDER FOR MORI SEIKI SL25 Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal. $11.50 for USPS Priority Mail shipping with tracking. If you have any questions regarding this item. Please give us a call at 440-343-4419 and we will be happy to assist you. Thanks for looking!
|
|
|
MADAULA OFFSET LIVE TOOL HOLDER FOR MORI SEIKI SL25 CNC TURNING CENTER
MADAULA OFFSET LIVE TOOLHOLDER FOR MORI SEIKI SL25 1:1 DRIVE RATIO USES ER16 COLLETS. Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal. FREE USPS Priority Mail shipping with tracking* If you have any questions regarding this item. Please give us a call at 440-343-4419 and we will be happy to assist you. Thanks for looking!
|
|
|
Iscar SCK D32-40-W32 Endmill Holder + 27 lot CCMT Carbide Inserts Cnc Lathe Tool
This auction for: Iscar Holder SCK D32-40-W32 9 inserts Crush Endmill(Used in great condition) + 27 used inserts ccmt- 3 sets! Will send safety without box) I mark those inserts has used beacuse thay come from factory that closed. Thay was toghter in the same box and have some touches from each other. I believe that thay have 85-90%+ tool life. I tried to take a pictures as best as i can. Please check well and if there any questions please contact me before you bid. We accept PayPal only. Please clear payment in 2 days. We ship worldwide with standard air mail. All custom and fees are the buyer responsibility. For Ems shipping rates please contact me. Our business work since 1990 and sell wholesale and individuals micro tools. And industry equipment to all over the world! We have in stock all sizes of micro drills. Micro endmills, and others ... more1/8 shank tools. Our goods is the BEST QUALITY in the market, and check well before shipping to keep you. As our customers satisfied! We Believe that high quality tools. Good service, good customer support. And fast handling time, are the keys for success! Your satisfaction is in our first priority. Please feel free to with any questions. and don't forget to, and make sure to! Thanks for your business!
|
|
|
Iscar MVJNR 2525M-22 Holder Cnc Lathe Carbide Inserts
This auction for: Iscar Holder MVJNR 2525M-22(used in great condition) + 1 used insert. from factory that close. We accept PayPal only. Please clear payment in 2 days. We ship worldwide with standard air mail. All custom and fees are the buyer responsibility. For Ems shipping rates please contact me. Our business work since 1990 and sell wholesale and individuals micro tools. And industry equipment to all over the world! We have in stock all sizes of micro drills. Micro endmills, and others 1/8 shank tools. Our goods is the BEST QUALITY in the market, and check well before shipping to keep you. As our customers satisfied! We Believe that high quality tools. Good service, good customer support. And fast handling time, are the keys for success! Your satisfaction is in our first priority. Please feel free to with any questions. and don't ... moreforget to, and make sure to! Thanks for your business!
|
|
|
15 CNC Ball Nose end mills 3/8" Shanks, Lot #17
15 CNC Ball Nose end mills 3/8" Shanks H.S.S. cutter diameters vary. These cutters are in excellent condition, who ever buys these will be very happy, I inspected each one myself under magnification.Brand names in red are Brubaker.Brand names in blue are Melin.All made in U.S.A.
|
|
|
AXYZ 4000 CNC Router, Low Reserve
AXYZ CNC Router AXYZ CNC Router. 4' x 8' cutting area. 7 HP Perske spindle motor, micro droplet cutting tool cooling/lubrication system. Fully functional in my sign shop until I moved last year. Removed from shop and put in storage. Used to cut brass, aluminum, acrylic, wood& pvc in the manufacture of channel letters, monument signs, pole signs, cut letters, trophy plaques and anything else we made in our shop including making jigs and fixtures for our own use. 220v single phase. Including the CPU with Toolpath software installed. Will include the Enroute software also. This machine was working great when removed. My new location did not have the space built out for the router so it went to storage. I am now doing something different and no longer need it. This is an older version of the machine but the machine can be upgraded ... moreto the newest controllers and software thru AXYZ or I can purchase the parts and install for you. Parts for the upgrade would be supplied at cost and shipping, no mark up. Local pick-up or I can deliver for a fee(fee is dependent on distance) Located in Fort Myers. FL. If delivered I will include assembly and setup. 10% deposit due within 24 hours of close of auction thru paypal. Final payment due within 5 working days after. Will accept Cashiers check or Cash for final payment.
|
|
|
CNC Cat 40 Taper Tool Holding Cart
CNC Cat 40 Taper Tool Holding Cart, Click to View Image Album Click to View Image Album The item we are offering here is a. CNC Cat 40 Taper Tool HoldingCart This rack is set up to hold 54 of the 40 taper holders. This item is in nice shape. There will be no shipping on this Item(Unless you want this expense and request a quote) We will load the truck that you supply with no added charges. If you are interested I have a gentleman that will deliver this within a 150 mile radius of Laurel. DE 19956 his rate is $1.50 per loaded mile + tolls and you handle the unloading. can't do any lifting) The Purchaser of this unit will be buying this on a were is- as is contract. There is no warranty. The item is available for your viewing with a appointment at anytime. The location is Laurel. Delaware 19956. You can reach me(302) 228-0907 to make the ... morearrangements and or ask Questions. Feel free to view my other auctions of other items that may be of interest to you. Thanx. Tools4yourbid Information regarding the history and condition of the equipment we offer has been included exactly as it has been received in the description of the property. Normally. The property has not been operated or tested by the Seller to determine it's fitness for a purpose. The Property is sold and conveyed"AS IS, WHERE IS, and without representation or warranty. The seller hereby expressly disclaims all warranties, either express or implied, including an implied warranty of merchantability or fitness for a purpose Payment I accept the following forms of payment: PayPal FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
|
|
|
Seco EPB Graflex A780 70 fine Boring Head Cat50 4.485"-8.075" CNC Milling
Seco EPB Graflex A780 70 fine Boring Head Cat50 4.485"8.075" CNC Milling Seco EPB Graflex A780 70 fine Boring Head Cat50 Type Radial type of fine Boring heads Manufacture Seco EPB Model A780 70 Capacity 1: 114-160 mm 4.485"6.3000" Capacity 2: 159-205mm 6.260-8.075" Connection:Graflex Shank Cat50 Coolant Thru Pull Stud The main benefits of the A780: Precision- Micrometric adjustment within 2.5 µm on the diameter- Micrometric diameter setting protected by the insert holder and head contact- Hole diameter precision IT5 is possible to achieve Productivity- Cutting speeds up to 1500 m/min with balanceable heads- Coolant through the head towards the insert User friendly- Insert holders for chamfering and back boring Cost effective- For low to average machine speeds. Pre-balanced heads are ideal Long tool life- A780 ... moreheads are dust proof and greased for life- no re-greasing maintenance is required. Flexibility- Large range of insert grades for all materials I have several of these available. These are from a large shop near Chicago that closed. Nice tools. Save Thousands. I try to take really good photos so you know exactly what you will get. Check out the photos. Thanks for looking good luck. I reserve the right to end a listing if there is not a bid. If a bid has already been placed I will not end a listing early. If you are interested in Bidding bid early to prevent the item from being sold outside of eBay(I have a used store) Thanks Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know. tr315. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23
|
|
|
(5) Parlec Model C50-10SC4 Cat50 Collet Chucks, Cat 50 CNC HMC VMC Haas Makino
These tool holders are from a large Wisconsin based motorcycle manufacturing company in Wisconsin. They moved to a new building and I purchased their remaining tool crib. There are no surprises here. Very clean Cat50 Tooling This plant was running Haas. Mori Seiki, Toyoda, Makino and Fadal vertical machining centers and horizontal machining centers. Check out my other lots I have over 300 tool holders to sell. I will definitely combine shipping where ever possible. Condition: Used Manufacturer: Parlex Type: Cat 50 Collet Chucks. Model: C50-32ER4. Info: 100TG Collets. Projection Gage Line to Nose End 3.5 In, Socket Depth 4.25 In. I reserve the right to end a listing if there is not a bid. If a bid has already been placed I will not end a listing early. If you are interested in Bidding bid early to prevent the item from being sold outside of ... moreeBay(I have a used store) Thanks. Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know. 2213-6
|
|
 |