In 
 
Order by: 
Available to: 
Price: 
 - 
$
134
Buy It Now
$16.95 Shipping
Condition: New
Location: Taylorsville,NC,USA
HI YOU ARE LOOKING AT A POWER DRAW BAR FOR A VARIABLE SPEED R8 COLLET IMPORT AND BRIDGEPORT TYPE MILLING MACHINE. JET. MSC, ATRUMP, WT TOOL, ACRA, ACER, ... moreCHEVLAIR, ENCO, TRAVERS, SUPERMAX, AND MANY MORE. THE MOST SIMPLE AND ECONOMICAL POWER DRAWBAR OUT THERE. IT WORKS FROM AIR PRESSURE 90 PSI MAX. YOU JUST PULL DOWN ON THE HANDLE AND MOVE IT LEFT OR RIGHT TO LOOSEN OR TIGHTEN THE DRAW BAR, LET GO OF THE HANDLE AND IT RETURNS TO TOP AUTOMATIC. A HUGH TIME AND AGGRAVATION SAVER NO LOST TIME LOOKING FOR YOUR WRENCH OR HAMMER. MAIN BODY MADE OF 6061 ALUMINUM, MAIN FRONT SLIDE IS MADE WITH STEEL ROD AND NYLON BUSHING, FOR LONG LIFE AND TO DAMPEN ANY VIBRATION FROM THE HEAD. ONE SCREW REMOVES TOP PART TO GIVE ACCESS TO DRAW BAR. CAN BE MOUNTED IN MANY POSITIONS AROUND THE HEAD TO FIT YOUR OWN PREFERENCE. HANDLE FULLY ADJUSTABLE TO FIT YOUR PREFERENCE AND TO TAKE UP ANY WEAR THAT MAY TAKE PLACE OVER TIME. USES ORIGINAL DRAWBAR SO NO SPECIAL DRAW BAR TO BUY. COMES ASSEMBLED COMPLETE WITH IMPACT WRENCH READY TO MOUNT ON YOUR MILL AND USE. IF YOUR COLLET STICKS IN THE SPINDLE RETURN THE IMPACT TO THE TOP AND BRING IT DOWN AND STRIKE THE DRAWBAR AS YOU WOULD WITH A HAMMER THERE IS ALSO A REGULATOR BUILT IN THE IMPACT WRENCH TO KEEP FROM OVER TIGHTENING THE DRAWBAR. WE DESIGNED THIS POWER DRAW BAR IN OUR SHOP AND HAVE SOLD OVER 400 UNITS WITH GREAT RESULTS THERE ARE COPIES OUT THERE SO BEWARE GET THE ORIGINAL. ALL OF THE MAIN BODY IS MADE AND ASSEMBLED IN OUR SHOP HERE AT M&T MACHINE, TAYLORSVILLE N.C. 28681 USA. WE HAVE USED THIS TYPE POWER DRAW BAR IN OUR SHOP FOR MORE THAN 10 YEARS WITH NO PROBLEMS. THERE ARE COPIES OUT THERE BEWARE PLEASE SUPPORT OUR RESEARCH AND DEVELOPMENT WE OFFER A FULL 30 DAY FULL REFUND IF YOU ARE NOT FULLY PLEASED WITH THIS ITEM. ANY QUESTIONS CALL 828-632-1500 HOME. PLEASE CHECK OUR EBAY FEEDBACK AND PLEASE LOOK AT OUR EBAY STORE WE HAVE OTHER TIME AND LABOR SAVING MACHINE SHOP TOOLS FOR SALE AS WELL AS POWER DRAWBARS FOR STEP PULLEY HEADS THANK YOU VERY MUCH FOR LOOKING TODD AND SHANNON
$
141
Buy It Now
$16.95 Shipping
Condition: New
Location: Taylorsville,NC,USA
HI YOU ARE LOOKING AT A POWER DRAWBAR FOR A STEP PULLEY HEAD IMPORT AND BRIDGEPORT TYPE MILLING MACHINE. JET. MSC, ATRUMP, WT TOOL, CHEVLAIR, ENCO, TRAVERS, ... moreSUPERMAX, AND MANY MORE. THE MOST SIMPLE AND ECONOMICAL POWER DRAWBAR OUT THERE. IT WORKS FROM AIR PRESSURE 90 PSI MAX. YOU JUST PULL DOWN ON THE HANDLE AND MOVE IT LEFT OR RIGHT TO LOOSEN OR TIGHTEN THE DRAW BAR, LET GO OF THE HANDLE AND IT RETURNS TO TOP AUTOMATIC. A HUGH TIME AND AGGRAVATION SAVER NO LOST TIME LOOKING FOR YOUR WRENCH OR HAMMER. MAIN BODY MADE OF 6061 ALUMINUM, MAIN FRONT SLIDE IS MADE WITH STEEL ROD AND NYLON BUSHING, FOR LONG LIFE. ONE SCREW REMOVES TOP PART TO GIVE ACCESS TO DRAW BAR. CAN BE MOUNTED IN MANY POSITIONS AROUND THE HEAD TO FIT YOUR OWN PREFERENCE. MAY NEED A LONGER DRAWBAR OR MODIFICATION TO YOUR EXISTING DRAWBAR A LONGER DRAWBAR CAN BE PURCHASED AT ALMOST ANY MACHINE SHOP TOOL SUPPLY STORE. COMES ASSEMBLED COMPLETE WITH IMPACT WRENCH READY TO MOUNT ON YOUR MILL AND USE. ALL PARTS MADE IN OUR SHOP HERE AT M&T MACHINE, TAYLORSVILLE N.C. 28681 USA EXCEPT THE IMPACT WRENCH AND FASTENERS. WE DEVELOPED THIS POWER DRAWBAR IN OUR SHOP BEWARE THERE ARE INFERIOR COPIES OUT THERE BUT GET THE ORIGINAL HERE. WE HAVE USED THIS TYPE POWER DRAW BAR IN OUR SHOP FOR MORE THAN 10 YEARS WITH NO PROBLEMS. WE HAVE OVER 600 UNITS SOLD WITH GREAT RESULTS. THEIR ARE COPIES OUT THERE PLEASE SUPPORT OUR TIME SPENT ON RESEARCH AND DEVELOPMENT YOU WILL NOT REGRET IT{REQUIRES YOU DRILL THREE 1/4-20 HOLES IN THE TOP OF YOUR MILLING HEAD TO MOUNT THE POWER DRAWBAR} INSTALLATION INSTRUCTIONS INCLUDED. PLEASE CHECK OUR EBAY FEEDBACK ANY QUESTIONS CALL 828-632-1500. PLEASE LOOK AT OUR EBAY STORE WE HAVE OTHER TIME SAVING MACHINE SHOP TOOLS AS WELL AS A POWER DRAWBAR FOR VARIABLE SPEED HEADS FOR SALE. THANK YOU VERY MUCH FOR LOOKING TODD AND SHANNON
$
165.29
Buy It Now
$0 Shipping
Condition: New
Location: Fernley,NV,USA
$
3,450
Buy It Now
Free Shipping
Condition: Used
Location: Pawtucket,RI,USA
$
9,950
Buy It Now
Free Shipping
Condition: Used
Location: Louisville,KY,USA
11" x 58" BRIDGEPORT SERIES II VERTICAL MILL w/ 2-AXIS DRO Year: 1982 Specs. Table Size 11" x 58" Table Travel(X-Axis) 30" Saddle ... moreTravel(Y-Axis) 15" Quill Travel 5" Knee Travel 16" Maximum Weight of Workpiece 1500 Lbs. Spindle Speeds. Infinitely Variable 50 to 3500 RPM Spindle Diameter 2-1/8" Quill Diameter 4-1/4" Spindle Taper No. 40 Quick-Change Power Downfeed Range. Variable.06 to 2.5 IPM Feed Rate X& Y 3/8 to 24 IPM Feed Rate Z 3/16 to 12 IPM Rapid Rate X& Y 24 IPM Rapid Rate Z 12 IPM Spindle motor 4 HP Approximate overall dimensions 84" x 74" x 99" H Approximate Weight 5.200 Lbs. Equipped With: Power Quill Feed( up or down) Power Feed X& Y Axis. Power Feed on Knee. Rapid Traverse. Bijur Lube System. Chrome Ways. Telyedyne Point Finder 2-Axis DRO. Coolant. HIMES MACHINERY LLC. PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery* WE ARE FULL SERVICE& NEVER CHARGE FOR LOADING* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-148aa06d837-0x10d-
$
4,999.99
Buy It Now
Free Shipping
Condition: Used
Location: Watertown,CT,USA
$
174.97
Buy It Now
$0 Shipping
Condition: New
Location: Perth Amboy,NJ,USA
$
7,600
Buy It Now
$750 Shipping
Condition: New
Location: Muskegon,MI,USA
$
300
Buy It Now
$30 Shipping
Condition: New – Open box
Location: Whitehall,PA,USA
$
100
Buy It Now
$0 Shipping
Condition: Used
Location: Fremont,MI,USA
This is a used Bridgeport Power Feed 6F Electrical Control Housing. It came off of a trade-in Bridgeport Power Feed from a customer. The new cost for ... morethis part is $150.65. As a used part. We are selling the unit, as-is with no warranty, for $75.00.
$
79.99
Buy It Now
Free Shipping
Condition: Used
Location: Watertown,CT,USA
Bridgeport Digital Read Out(DRO) Mount/ Arm/ Bracket& R8 Collet Rack- Bausch& Lomb Used mount from my Bridgeport mill that is not getting used. ... moreCould use a good cleaning and maybe a fresh coat of paint but maybe you can put it to use. Label on front is coming off.
$
12,500
Buy It Now
Free Shipping
Condition: Used
Location: Portland,CT,USA
$
499.95
Buy It Now
$21 Shipping
Condition: New
Location: Largo,FL,USA
SPEEDY POWER DRAWBAR II for VARIABLE SPEED and STEP PULLEY TYPE MILLING MACHINE MADE IN THE USA! Approximate weight: 18 lb. PART# 1038-1 Important Information! ... moreThis Speedy Power Drawbar II comes with a Draw bar at no extra cost. Ple ase specify the type of milling machine and Drawbar(from the list a bove) you ha ve with the order! If you have a Ste p Pull ey type milling machine. You need to order a Base Plate(038-0141) at an extra cost of $55.00( Please request an invoice from the seller and state you require the base plate and we will send you an updated invoice) Please include your Phone# with order. Please Call 727-585-8555 if you have any question or do not see your mill on the above list. Don't settle for an imported copy.buy the Speedy Power Drawbar II Made in America! NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK ALL BRIDGEPORT SERIES I REPLACEMENT PARTS! JUST ASK We are a distributor for HIGH QUALITY TOOLS. Inc. and carry their complete line of replacement parts and accessories. Please e-mail us at tool guys02@gmail.com for all of your Bridgeport and other knee-mill replacement parts needs. We also carry cutting tools. Work holding. Tool holders, measuring tools and much much more. Watch our store.new inventory being added regularly! Thank You for looking! We have all items that we sell in stock and try to ship from warehouse closest to you to guarantee quick delivery times! Questions and e-mails are answered quickly. Our schedule is Monday through Friday, 8:00am till 5:00pm EST Items are shipped as soon as we receive payment. And will be shipped out same day if payment is received before 3:00pm EST. We always try to improve our customer service to ensure that you. The customer, receive best service available! Payment We accept PayPal. And All Major Credit Cards as payment for items purchased at our auction. all payments must be received within 7 business days. Please email us for further information. Shipping and Handling We will happily combine shipping on multiple item. Just let us send y
$
4,500
Buy It Now
Free Shipping
Condition: Used
Location: Waldorf,MD,USA
$
9,500
Buy It Now
Free Shipping
Condition: Used
Location: Portland,CT,USA
$
10,000
Buy It Now
Free Shipping
Condition: Used
Location: Lenapah,OK,USA
$
7,950
Buy It Now
Free Shipping
Condition: Used
Location: Bridgeport,CT,USA
$
139
Buy It Now
$17.5 Shipping
Condition: New
Location: Taylorsville,NC,USA
HI YOU ARE LOOKING AT A PNUEMATIC IMPACT AIR OPERATED POWER DRAWBAR FOR A CNC MILL STEP PULLEY HEAD IMPORT AND BRIDGEPORT TYPE MILLING MACHINE. JET. MSC, ... moreATRUMP, WT TOOL, CHEVLAIR, ENCO, TRAVERS, SUPERMAX, AND MANY MORE. THE MOST SIMPLE AND ECONOMICAL POWER DRAWBAR OUT THERE. IT WORKS FROM AIR PRESSURE 90 PSI MAX. YOU JUST PULL DOWN ON THE HANDLE AND MOVE IT LEFT OR RIGHT TO LOOSEN OR TIGHTEN THE DRAW BAR, LET GO OF THE HANDLE AND IT RETURNS TO TOP AUTOMATIC. A HUGH TIME AND AGGRAVATION SAVER NO LOST TIME LOOKING FOR YOUR WRENCH OR HAMMER. MAIN BODY MADE OF 6061 ALUMINUM, MAIN FRONT SLIDE IS MADE WITH STEEL ROD AND NYLON BUSHING, FOR LONG LIFE. ONE SCREW REMOVES TOP PART TO GIVE ACCESS TO DRAW BAR. CAN BE MOUNTED IN MANY POSITIONS AROUND THE HEAD TO FIT YOUR OWN PREFERENCE. MAY NEED A LONGER DRAWBAR OR MODIFICATION TO YOUR EXISTING DRAWBAR A LONGER DRAWBAR CAN BE PURCHASED AT ALMOST ANY MACHINE SHOP TOOL SUPPLY STORE. COMES ASSEMBLED COMPLETE WITH IMPACT WRENCH READY TO MOUNT ON YOUR MILL AND USE. ALL PARTS MADE IN OUR SHOP HERE AT M&T MACHINE, TAYLORSVILLE N.C. 28681 USA EXCEPT THE IMPACT WRENCH AND FASTENERS. WE DEVELOPED THIS POWER DRAWBAR IN OUR SHOP BEWARE THERE ARE INFERIOR COPIES OUT THERE BUT GET THE ORIGINAL HERE. WE HAVE USED THIS TYPE POWER DRAW BAR IN OUR SHOP FOR MORE THAN 10 YEARS WITH NO PROBLEMS. WE HAVE OVER 800 UNITS SOLD WITH GREAT RESULTS. THEIR ARE COPIES OUT THERE PLEASE SUPPORT OUR TIME SPENT ON RESEARCH AND DEVELOPMENT YOU WILL NOT REGRET IT{REQUIRES YOU DRILL THREE 1/4-20 HOLES IN THE TOP OF YOUR MILLING HEAD TO MOUNT THE POWER DRAWBAR} INSTALLATION INSTRUCTIONS INCLUDED. PLEASE CHECK OUR EBAY FEEDBACK ANY QUESTIONS CALL 828-632-1500. PLEASE LOOK AT OUR EBAY STORE WE HAVE OTHER TIME SAVING MACHINE SHOP TOOLS AS WELL AS A POWER DRAWBAR FOR VARIABLE SPEED HEADS FOR SALE. THANK YOU VERY MUCH FOR LOOKING TODD AND SHANNON
$
1,253.25
Buy It Now
$44.23 Shipping
Condition: New
Location: United Kingdom
$
329
Buy It Now
$0 Shipping
Condition: Used
Location: Santa Paula,CA,USA
Made in France Enco Boring head with R8 shank Takes 1/2" boring tools Head dia. is 2 3/8' Seems to work just fine. Sales and shipping to all ... more50 states only. Thanks for looking.
$
975
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Saint Louis,MO,USA
Bridgeport Vertical Mill variable speed head. Manufacturer: Bridgeport Model: Series 1 Long travel X 48" table. S/N: 211780 Year: mid 80's Head ... morewas completely rebuilt by Dan's Machine in Santa Fe Springs CA 3 months ago. We have bill of sale. Paid over 3k with parts and labor. A quick release quill stop and quick handle were installed also at this time. There is no hours on head. Runs like new. Table looks good only a couple of oops marks but backlash is tight and gibs feel really good. Table Length 9" x 48" Table travel'X' 36" Cross Saddle Travel'Y' 12" Vertical saddle travel 16" Spindle Speeds(Variable) 60- 4.200 RPM Spindle Nose R- 8 Spindle travel'Z' 5" Spindle Quill Feeds(3) 0.001" 0.006" 0.0015" Ram Travel 12" Dimensions(L x W x H) 60" x 60" x 72" approx Weight 2.000 Lbs. approx Equipped With: Bridgeport Table Power Feed X axis with adj stops One Shot Lube System from Bijur Horsepower: 1.5 220v 3ph with quick disconnect plug. No tooling or vices included. We can install a readout for additional charge. Location: Yorba Linda CA 92886. Industrial Park. Inspection: recommended BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. We have forklift to load on truck for no charge if required. Posted with
$
257.39
Buy It Now
$0 Shipping
Condition: New
Location: China
$
1,500
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown,VA,USA
$
4,567
Buy It Now
Free Shipping
Condition: Used
Location: Canada
$
250
Buy It Now
Free Shipping
Condition: Used
Location: Highland,NY,USA
$
6,999
Buy It Now
$0 Shipping
Condition: Used
Location: Roseville,MI,USA
$
4,999.99
Buy It Now
Free Shipping
Condition: Used
Location: Watertown,CT,USA
bridgeport milling machine 9" x 42" R8 Collets 2 hp X power feed great condition nothing wrong with it asking $4000(power feed included)
$
9,899
4d 0h 28m 4s
0 bids
Free Shipping
Condition: Used
Location: Wyoming,RI,USA
Gold International Machinery Corporation | Luxmill(BRIDGEPORT-TYPE) 2 HP. VARI-SPED Vertical Milling Machine. 1985 Our Inventory Number: 1149-470 Technical ... moreSpecifications: 230V/3PH/60HZ, VARIABLE SPEED, V-Ram Type TURRET MILLING MACHINE, MODEL TM, S/N: 700585, NEW 1985, Table size: 9" x 42" Longitudinal table feed: 28" Cross table feed: 12" Vertical travel of knee: 16" Motor: 2 HP, Spindle speeds: 80- 4200 RPM. Variable, Spindle: R8, Estimated weight: 2200 lbs. Equipped With: Electronic longitudinal power table feed, 1 Shot Lubrication, This item is in very good condition! We can palletize. Cover and load this item for an additional fee. Please inquire. We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached dire
$
149.96
Buy It Now
$0 Shipping
Condition: New
Location: Perth Amboy,NJ,USA
$
5,500
Buy It Now
Free Shipping
Condition: Used
Location: Louisville,KY,USA
$
289.5
Buy It Now
$0 Shipping
Condition: New
Location: Rosemead,CA,USA
Better Values Friendly Service Fast Shipping BRAND NEW Power Feed Y Axis Unit overall dimension: 5'L x 8/38'W x 11-1/4'H Type: Y-Axis Reversible ... morewith 1.5 second time delay Variable speed Rapid traverse speed: 40"Min Feed range: 0-10"Min 115V/60Hz/ 1 Phase power supply Torque: 150LBS Quantity: 1 Set Shipping FREE SHIPPING in lower 48 States. Additional charge applies to APO. AK, HI, GU, PR, and VI addresses. Please contact seller for additional information. All items will be shipped Ground Service. Payments Paypal payment only please. Buyer can use MasterCard. Visa, Discover and American Express through Paypal. It is Safe, Fast& Reliable. In all cases payment is expected within 7 days of sale date. Contact Info We are here to help. If you have any questions or concerns regarding your purchase, please feel free to contact us at any time using the eBay messaging system. Please allow 24 to 48 hours to receive a response. We will do our best to answer all your questions as soon as we can. Policy All purchases come with a 14-days money back guaranteed. SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all postage fees on return. All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused.
$
14,400
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
8,450
Buy It Now
Free Shipping
Condition: Used
Location: Portland,CT,USA
$
3,995
Buy It Now
Free Shipping
Condition: New
Location: Eastlake,OH,USA
$
15,900
Buy It Now
$0 Shipping
Condition: Used
Location: Tulsa,OK,USA
$
19,500
Buy It Now
$0 Shipping
Condition: Used
Location: East Hampton,CT,USA
$
7,999.99
1d 5h 0m 16s
0 bids
$0 Shipping
Condition: Used
Location: Somerville,NJ,USA
$
378.94
Buy It Now
Free Shipping
Condition: Used
Location: United Kingdom
Interstate 09505298 Horizontal Right Angle Milling Attachment set for R8 Bridgeport type- new set in nice wooden box- normally in supplier catalog for ... more$1200- make us an offer- Comes with all pieces in photo- was all sealed in orig. plastic/ opened for photo( Location T3) THANK YOU FOR LOOKING! please look left for our Ebay store categories. Shop our store today! Item will ship as it appears in photo. No extra access.not mentioned… ALSO IN OUR EBAY STORE TODAY: 1000s of drill bits lots of different sockets. Solder* Taps. Reamers and other consumables*Snap On wrenches. Sockets, more! many. Many different abrasives, sanding paper, cloth, belts, discs. CFL bulbs General Electric*Elec. Transformers. Small motors, relays. Adaptors*Parker Fittings by the 100s*Fluke meters and leads*metal working cutters reamers tool holders*hammers& torque meters* plumbing tools hvac tools AND MUCH MORE! click here for my store: http:stores.shop.ebay.com/A-Good-Source Reliable Seller. Reliable Tools, Great Prices!
$
100
Buy It Now
$21.9 Shipping
Condition: Used
Location: Santa Cruz,CA,USA
$
4,250
Buy It Now
Free Shipping
Condition: Used
Location: Holland,OH,USA
$
8,450
Buy It Now
Free Shipping
Condition: Used
Location: Portland,CT,USA
$
6,950
Buy It Now
Free Shipping
Condition: Used
Location: Portland,CT,USA
$
188.1
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
7,500
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown Heights,NY,USA
BRIDGEPORT#TC3 TORQ-CUT CNC VERTICAL MACHINING CENTER NEW: 1999 TABLE SIZE- 14" X 36" TRAVEL- X) 30" TRAVEL- Y) 18" TRAVEL- Z) 20" ... moreSPINDLE TAPER- BT 40 SPINDLE SPEED RANGE- 80 TO 8.000 RPM RAPID TRAVERSE RATE- X& Y) 826 IPM RAPID TRAVERSE RATE- Z) 710 IPM MAXIMUM TABLE LOAD CAPACITY- 2.000 LB. TOOL MAGAZINE CAPACITY- 22 TOOL CHANGE TIME- 6 SECONDS SPINDLE DRIVE- 9.5 HP( PEAK) VECTOR CONTROLLED INVERTER DRIVE) APPROXIMATE MACHINE WEIGHT- 7.200 LBS APPROXIMATE MACHINE DIMENSIONS- 98"LR) X 105"FB) X 97"H) EQUIPPED WITH- G.E. FANUC 21i-M CNC CONTROL COOLANT SYSTEM AUTOMATIC LUBRICATION SYSTEM FULL ENCLOSURE KURT VISE TOOL CART WITH LARGE ASSORTMENT OF TOOL HOLDERS WORK LIGHT HIMES MACHINERY PHONE- 888-803-2496- FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144be60afd8-0x102-
$
6,700
Buy It Now
Free Shipping
Condition: Used
Location: Portland,CT,USA
$
8,350
Buy It Now
$950 Shipping
Condition: New
Location: Muskegon,MI,USA
$
2,495
Buy It Now
$0 Shipping
Condition: New
Location: Berea,OH,USA
$
5,950
Buy It Now
$0 Shipping
Condition: Used
Location: USA
$
419.99
Buy It Now
Free Shipping
Condition: New
Location: Broadview Heights,OH,USA
THIS IS THE SPINDLE BULL GEAR ASSEMBLY FOR THE VARIABLE SPEED AMERICAN MADE BRIDGEPORT MILLING MACHINES INCLUDES THE BULL GEAR& COUNTERSHAFT GEAR ... moreOEM 2183933 PLEASE CHECK OUT OUR STORE FOR OTHER NEW AND USED BRIDGEPORT PARTS. WE DO STOCK ALL THE PARTS FOR THE SERIES I AMERICAN MADE BRIDGEPORT. PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email matacoinc@aol.com for further information. Shipping and Handling Shipping weight: 7lbs. Buyer pays the shipping& handling charge. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
4,900
Buy It Now
Free Shipping
Condition: Used
Location: O'Fallon,MO,USA
$
3,950
Buy It Now
Free Shipping
Condition: Used
Location: Orange,CA,USA
$
275.59
Buy It Now
Free Shipping
Condition: Used
Location: United Kingdom
$
42.95
Buy It Now
$4.5 Shipping
Condition: New
Location: Trumbull,CT,USA
$
7,950
Buy It Now
Free Shipping
Condition: Used
Location: Holland,OH,USA
$
8,650
Buy It Now
$25 Shipping
Condition: Used
Location: Louisville,CO,USA
$
7,980
Buy It Now
$1,200 Shipping
Condition: New
Location: Ontario,CA,USA
$
6,900
Buy It Now
Free Shipping
Condition: Used
Location: Bradfordwoods,PA,USA
$
9,950
Buy It Now
$0 Shipping
Condition: Used
Location: Granger,IA,USA
$
94.95
11h 47m 17s
0 bids
$18.5 Shipping
Condition: Used
Location: Culver,IN,USA
$
6,950
Buy It Now
Free Shipping
Condition: Used
Location: Brook Park,OH,USA
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
 In 

Past Items  
 
Assorted Bridgeport CNC Control Boards Bridgeport Control Board Part# A-023086 AUX# 023085- Bridgeport Control Board PSI 022637-A Part# A-022638- Bridgeport Control Board SCA A-026296 Part# A-026296- Bridgeport Control Board TDC 018561A Part# 1918598- Bridgeport Control Board SMD 027015. Part# 027015. Bridgeport Control Board ZDI 2928110A. Part# 2928110A. Bridgeport Control Board RCK CP 1933163. Part# 1933163 SOLD AS IS.
Bridgeport TEXTRON board WD286-WDM2. At the back says 60-600105-03 Rev XO Was purchased among the other computer hardware from the family of passed away industrial engineer/ computer tech. It looks like he treated this board as a valuable thing- it was carefully packed in antistatic bag and the box. Along with the memory modules and port connectors(see pic. but I have NO WAY to test this board or any of these components so I'm selling the board. Memory and cables as an untested vintage electrical equipment- AS IS" No return, refund or warranty. If you don't think it is fair- please. Continue shopping and buy such board somewhere else. AS IS.
1998 Bridgeport Series One Vertical Knee Mill. With a 9" x 48" Table, 2 Horsepower Motor, R-8 Taper and Newall 2-Axis DRO's Specification Description Table Size, 9" x 48" Table Travel-X-Axis- 36" Longitudinal, Saddle Travel-Y-Axis) 12" Cross, Spindle Quill Travel-Z-Axis- 5" Vertical, Knee Travel, 16" Vertical, Spindle Quill Speeds( Vari-Speeds) to 4.200 RPM, Spindle Taper, R-8, Head Tilt Front to Back, +/ 45 degrees, Head Tilt Side to Side, +/ 90 degrees, Motor, 2 HP, Electrical, 220/ 440/3/60HZ, Machine Weight. Approx, 2.500 Lbs. Equipped With: Servo Power Feed for X Axis. Newall Sapphire 2-Axis Digital Readout, One Shot Lubrication System, work Light NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate as possible. If ... moreyou notice a discrepancy, please let one of our sales people know so that the error can be corrected. Warranty USED EQUIPMENT: 30 day return privilege per MDNA. We suggest you Inspect All Used Machinery Prior to Purchase. Need help with Questions on shipping or assistance with this machines specifications? Feel Free to call us direct at 847-338-7139… ask for Erik J. Myers.
1879 Franklin Twp PA Teachers Institute Bridgeport Schoolhouse Program Description: Greene County Ephemera Franklin Township Teachers' Institute at Bridgeport Schoolhouse 1879 Lists names of speakers. Attendees About 3 x 5-1/2 Some edge damage I have acquired a nice lot of historic Waynesburg ephemera- please check other listings! I acquire items at auction. Although my home is smoke free and pet free. I cannot guarantee these items came from same environment. PAYMENT MUST REACH ME WITHIN 7 Days. Regardless of payment method. I do combine shipping on articles purchased within a 7 day period. Shipping may be higher based upon final weight. At this time I am not shipping outside of the USA. If you are living outside of USA but have a shipping address in the USA. Please contact me after you try to bid and have been rejected. I can then choose ... moreto make an exception. Shipping: Shipping is normally first class for small paper items. Media will ship media rate unless it's cheaper to use first class. Payment: Payment is due in 7(Seven) days regardless of payment method. click to Enlarge inkfrog terapeak. I000000. InkFrog Analytics.
JACOBS HEAVY DUTY PLAIN BEARING CHUCK MODEL NO.34 0- 1/2" CAPACITY. R8 TAPER SHANK KEY INCLUDED Like new condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. Thanks for looking!
SERIAL# 7365 BRIDGEPORT LOW USAGE MACHINE WITH ORIGINAL COST OF OVER $45000.00. MACHINE RUNS PERFECT AND HEAD IS VERY QUIET. THIS MACHINE HAS THE LATEST CONTROLS THAT WAS AVAILABLE ON ONE OF THE LAST BRIDGEPORT'S PRODUCED. Specifications: Acu-Rite Millmate Digital Readout Power Quill Feed on Head Optional 45 Degree Handle For Table Operation Chrome Ways and Gibs Table Size 11” x 58” T-Slots 3 on 2 1/2” T-Slot Size 5/8” Height of Above Floor. Max. 48 3/4” Table Travel- X Axis 30” Saddle Travel- Y Axis 15” Quill Travel 5” Knee Travel- Z Axis 16” Ram Travel 16” Throat Distance 10 5/8” 26 5/8” Table to Spindle Nose Gage Line Minimum 1” Max. Weight of Workpiece 1500 lbs. Power Rating 4 HP#40 Taper Quick Switch ERICKSON NMTB Speed Range- Low 50-450 RPM Speed Range- High 450-3500 RPM Controlled Downfeed Range- Manual Adjust 0.6-2.5 IPM Drilling ... moreCapacity- Mild Steel(Manual) 1 1/4” Drilling Capacity- Mild Steel(Power Feed) 3/4” Milling Capacity- Mild Steel 4 cu. In/min Boring Range- Mild Steel to 8” Spindle Diameter 2 1/8” Quill Diameter 4 1/4” Feed Rate(X& Y) 3/8- 24 ipm Feed Rate Z Axis 3/16- 12 ipm Rapid Rate(X& Y) 24 ipm Rapid Rate Z Axis 12 ipm Dimensions 7’ x 10’ Height 93” Weight 5.500 lbs. MACHINE CAN BE INSPECTED IN BRIDGEPORT CT. CALL BRIDGEPORT MILLING HEAD REPAIR. INC. AT 203-445-1944 LOADING IS FREE WE CAN MAKE SHIPPING ARRANGEMENTS FOR YOU.
6"Bridgeport Mill Vise milling machine table vice 6"Bridgeport Mill Vise milling machine table vice SPECIFICATIONS: JAW LENGTH: 6” JAW HEIGHT: 2” JAW OPENING: 5” Country of Mfg: USA* Shipping Weight approx. 78 lbs. Shipping Envelope Size: 22" Long x 18" Wide x 12" High* Sold AS IS NO RETURNS FOB OUR WAREHOUSE Shipping Point: Robonex- 10090 Queens Way- Chagrin Falls- Ohio- 44023* PAYMENTS: PayPal(We accept Visa/MasterCard. Discover and Amex through PayPal only. For personal checks please send your checks electronically via PayPal too) If you make the payment through PayPal. We can ONLY ship to your PayPal confirmed address. No exceptions. Payment must be received within 5 days or a Non Paying Bidder Alert will be filed. FEEDBACK: Feedback is an integral part of eBay. Please leave feedback for us on eBay and we will ... moredo the same for you. If you are considering leaving us negative or neutral feedback. Please give us the opportunity to resolve the issue first. We will try our best to help you. Powered by
Goodwill Fire Co. Bridgeport. PA 50th Anniversary 1915-1965 Commemorative Glass measuring 4 3/4 inches in height. This glass is in good condition with no chips or cracks. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13e46dcd372-0xfd-
Welcome! Up for sale is a Mixed Lot Bridgeport Series II Spindle Wizard Quill Actuators. Pulleys& Parts. GLM291 2" Pulley ID. Cleaned, balanced, and new sleeve installed by Hi Quality Tool. Rebuilt Bridgeport Series II Variable Speed Pulley- 2 each(GLM064) Rebuilt Bridgeport Series II Variable Speed Pulley- 2 each(GLM075) 2 Position Quill Head for Bridgeport Series II Spindle Wizard Quill Actuator- Includes valves and accessories in box. GLM086) Solenoid Valve for Bridgeport Series II Spindle Wizard(GLM087) Large lot of Rebuild Components for Spindle Wizard Quill Actuators- O-Rings& Gasket Dies(GLM089) Rebuilt Bridgeport Series II Spindle Wizard Quill Actuator(GLM229a) Spindle Wizard Quill Actuator(GLM229b) no photos* Spindle Wizard Quill Actuator. For parts(GLM229c) no photos. Local delivery is available at a reduced rate and ... morepick up is free. Contact me for a freight quote as the calculator is usually wrong. When requesting a quote please include the following information as it will impact the amount of the quote: 1. Zip code of where the item is to be delivered, 2. Is the address a commercial or residential address. And 3. Is there a dock or forklift available at said address? Feel free to email any questions!
Welcome! Up for sale is a huge mixed lot of Bridgeport Controls Circuit Boards& Series II CNC& IIA Nc Manuals. GLM290 From a box labeled'Boards from spare parts machine. Unit is untested and sold AS-IS. Bridgeport Controls RTC Circuit Board A025359. As-Is A-025359(GLM092) Bridgeport Controls Circuit Board 019870. As-Is(GLM093) Bridgeport Controls Circuit Board 17979. As-Is(GLM094) Bridgeport Controls Circuit Board 019342-C. As-Is(GLM095) Bridgeport Controls Circuit Board 018710C. As-Is(GLM096) Bridgeport Controls Circuit Board 018484-B. As-Is(GLM097) Bridgeport Controls Circuit Board A018542 X-Y-Z Axis Controller Board. As-Is(GLM098) Bridgeport Controls Circuit Board A018542 X-Y-Z Axis Controller Board. Tagged'Good. It is tagged"Good Controller Board for X Y Z Axis. 2 each(GLM099) Bridgeport Controls Circuit Board A018197. ... moreTagged'Good' It is tagged'Good Board Out of 74 Machine. GLM100) Bridgeport Controls Circuit Board 019350-A. As-Is(GLM101) Bridgeport Controls Circuit Board A019223 0192A. As-Is(GLM102) Bridgeport Controls Circuit Board Motherboard 77 II A019373 018310-F. Needs Repaired- It is tagged'77 II Mother Needs Repair. GLM103) In a foam box from Bridgeport/Textron. It has a green Acceptance tag taped on the box. Unit is untested and sold AS-IS* Bridgeport Controls Circuit Board 1924086 A024086 FPS 024063-B. As-Is(GLM104) Bridgeport Controls Circuit Board 2921065-1 019342-C 1921065. Needs Repair- In the box is a bit of note paper that says"needs repair. GLM105) Bridgeport Controls Circuit Board 1918821-9 1918821 018710-D(GLM106) Bridgeport Controls Circuit Board 2918821-9 018710-D A018821. As-Is- There is a repair authorization tag along with some troubleshooting notes in the box as well. GLM108) In a foam box. One of the components is clearly loose and there is a burned looking section of the board. Untested. Sold AS-IS. Bridgeport Controls Circuit Board A018197 018505-A 097119. Bad(GLM109) Bridgeport Controls Circui
Welcome! Up for sale is a High Quality Tools R8 Drawbar w/ 19-1/4" Long Shank Bridgeport Variable Speed 2-Life. This drawbar is from High Quality Tools' Second Life series. Once the threads have worn you can remove the spacer and cut the old threads off at the notch. 19-1/4" long shank with an R/8 7/16"20 thread. The spacer nut is missing, cut it off and use it as a single life drawbar or make a spacer nut for it(you do, after all, have a Bridgeport) Used in good condition. Feel free to email any questions! SCT2126
These Blades are mostly in new if not slightly used condition. One for sure has a chipped tooth. But the rest are damn near new. I dont know much about them but I got them mixed in with bunch of stuff I bought from a machine shop. As far as sizes go they range from around 1' to almost 3' All sales are final.
Removed from working equipment. Guaranteed not DOA.
Button cutter cat-40 8 insert. 10 new spares. Looks hardly used. 5 1/2" diameter.
Bridgeport Boss 8 or 9 Main Motor Contactors: Forward and Reverse contactors with auxilliary contact blocks. Used Take off in good shape from a machine that was wired for 208 Volt 3 Phase 2 HP drive. Inv.15399) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales ... moreis an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
YOU ARE BIDDING ON THREE(3) USED BRIDGEPORT MILLING MACHINE LOCKING BOLTS! I know. The picture only shows 2 w/ washers, but you are bidding on(3) Three, without washers. I have sold a bunch of these. And these are my last three, hence, no washers. BOLT. NO WASHER GOES THRU THE TURRET INTO THE SPIDER USED ON STEP PULLEY AND VARIABLE SPEED HEADS OEM PART NUMBER IS 1061178. 2200109 4 OF THESE ARE REQUIRED TO HOLD TURRET SHIPPING IS ONLY $6.50
WITH UPER AND LOWER BEARINGS
1-1/4-3" 472
This is from a series one J head. It is genuine Bridgeport with original chrome plating and is 3 3/8 diameter. If yours is hammered or badly scarred. Then you will like this one. Has normal use, not sure of age. please note this is the bare housing only, no spindle or other items, thanks.
Very good. Moves OK on slow but stops and starts as speed is increased. Rapid is OK. needs rebuild, mabe only brushes and turn armature? As is.
good used R8 collet rack mfg unknown fits bridgeport mill and import copies please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
1943"Another Side of War" Bridgeport Brass WWII Ad 1943"Another Side of War" Bridgeport Brass WWII Ad This is an original"Another Side of War" Bridgeport Brass advertisement in excellent condition Carefully removed from a vintage magazine and preserved in a clean smoke free environment. Approximate size is 10x13 inches. 100% Satisfaction Guaranteed! vmw 110828217 This increasingly scarce advertisement looks good! It is perfect for framing and display and makes a thoughtful gift Thank you for allowing us to serve you! Premium Packaging is Standard! Your Vintage(s) will be individually protected by waterproof plastic sleeves and mailed 1st Class in a sealed. Thick cardboard shipping tube Double Protection- Safe and Secure! Vintage Ad Service Links Copyright 2008-2013 All Rights Reserved Powered by SixBit's ... moreeCommerce Solution
Bridgeport 12" Diameter Mill Milling Rotary Table Metalworking Work holding Serial Number- 216 SPECIFICATIONS: DIAMETER: 12 1/8” TABLE HEIGHT: 4 ¼” TABLE CENTER HOLE: 1” GEAR RATIO: 90:1 ACCURACY IS 30 SECONDS OF ARC THROUGH THE COMPLETE ROTATION(4) “T-SLOTS” CAST IRON FRAME SMOOTHLY TRAVELS 360 DEGREES* FOB OUR WAREHOUSE Shipping Point: Robonex- 10090 Queens Way- Chagrin Falls- Ohio- 44023 Shipping Weight approx. 130 lbs. Shipping Envelope Size: 22" Long x 18" Wide x 8" High Shipping Preparation: $50.00- Freight based on destination. Sold AS IS NO RETURNS CONTACT US For all questions or issues please email us at parts@robonex.com* or Call us M-F 9:00 am to 5:00 pm EST at(330) 408-5353* Customer satisfaction and feedback are very important to us. If for any reason you feel we deserve less than a 5 star rating, please ... morecontact us to let us know how we can improve our service. Powered by
BRIDGEPORT RT-15 RT15 15" PRECISION HORIZONTAL ROTARY TABLE This came from a shop that closed. This auction is for a BRIDGEPORT RT-15 RT15 15" PRECISION HORIZONTAL ROTARY TABLE. This is a very nice rotary table. It operates smoothly spins easily. It is in overall great shape and ready for your shop. If you have any questions at all feel free to ask. Below was copied off the web: This link is an nice rebuild of a Bridgeport Rotary table Bridgeport Rotary Table Rebuild- AAFRadio TERMS: Items are sold AS-IS and what you see is what you get Please check the pictures to verify anything stated in the ad. Payment is expected within 48 Hours of sale unless something else is arranged. We ship Fedex USPS or UPS domestically. Bax Global or USPS internationally. Buyer Pays actual shipping plus a $25 Handling and Packaging fee. Please ask questions ... morebefore the end of the auction. ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ClicPic
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL
ORIGINAL BRIDGEPORT PARTS WITH GOOD BEARINGS WE STOCK ALL BRIDGEPORT PARTS 1 HP. 1-1/2 AND 2 HP THIS CAME OFF A GOOD 1 HP HEAD we can combine shipping
~7~ NMTB-30 QUICK CHANGE KENNAMETAL ENDMILL HOLDERS 3/16"1" BRIDGEPORT CNC, 7 NMTB-30 QUICK CHANGE ENDMILL HOLDERS 3/16. 3/8, 1/2, 5/8, 3/4, 2-1" ALL EXCELLENT OR NEW CONDITION. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
~10~ NMTB-30 QUICK CHANGE KENNAMETAL ENDMILL HOLDERS 3/16"1" BRIDGEPORT CNC, 10 NMTB-30 QUICK CHANGE ENDMILL HOLDERS ALL IN EXCELLENT- NEW CONDITION. SIZES AS FOLLOWS 3/16. 1/4, 3/8, 1/2, 2-5/8, 3/4, 7/8, 2-1" QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $20.00 USPS Priority Mail® Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
~6~ ERICKSON KENNAMETAL NMTB-40 ENDMILL HOLDERS 3/16"5/8" BRIDGEPORT PROTOTRACK, 6 NMTB-40 QUICK CHANGE ENDMILL HOLDERS 2-3/8" 2-1/2" 2-5/8" ALL VERY GOOD CONDITION. PLEASE CHECK OUR OTHER AUCTIONS FOR MORE NMTB-40 QUICK CHANGE TOOL HOLDERS. QUESTIONS CALL MATT 845-691-4140* WE WILL COMBINE SHIPPING* Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
~4~ ERICKSON KENNAMETAL NMTB-40 ENDMILL HOLDERS 3/16"5/8" BRIDGEPORT PROTOTRACK, 4 NMTB-40 QUICK CHANGE ENDMILL HOLDERS 3/16. 3/8, 1/2, 5/8. PLEASE CHECK OUR OTHER AUCTIONS FOR MORE NMTB-40 QUICK CHANGE TOOL HOLDERS. QUESTIONS CALL MATT 845-691-4140* WE WILL COMBINE SHIPPING* Payment I accept the following forms of payment: PayPal Shipping& Handling $0.00 USPS Priority Mail® Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
~9~ ERICKSON KENNAMETAL NMTB-40 ENDMILL HOLDERS 3/16"7/8" BRIDGEPORT PROTOTRACK, 9 NMTB-40 ENDMILL HOLDERS ALL VERY GOOD TO EXCELLENT CONDITION. SIZES AS FOLLOWS 3/16. 3/8-2PCS, 1/2-2PCS, 5/8-2PCS, 3/4, 7/8. PLEASE CHECK OUR OTHER AUCTIONS FOR MORE NMTB-40 QUICK CHANGE TOOL HOLDERS. QUESTIONS CALL MATT 845-691-4140* WE WILL COMBINE SHIPPING* Payment I accept the following forms of payment: PayPal Shipping& Handling $20.00 USPS Priority Mail® Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13e52e528a7-0xfe-
~2~ NMTB-40 QUICK CHANGE TG-100 COLLET CHUCKS BRIDGEPORT PROTOTRACK CNC MILLING, 2 ERICKSON NMTB-40 QUICK CHANGE TG-100 COLLET CHUCKS VERY GOOD CONDITION. PLEASE CHECK OUR OTHER AUCTIONS FOR MORE NMTB-40 QUICK CHANGE TOOL HOLDERS. QUESTIONS CALL MATT 845-691-4140* WE WILL COMBINE SHIPPING* Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
~2~ NMTB-40 QUICK CHANGE ER-16 COLLET CHUCKS BRIDGEPORT PROTOTRACK*XLNT* 2 NMTB-40 QUICK CHANGE COLLET CHUCKS ER-16 BOTH IN EXCELLENT CONDITION. PLEASE CHECK OUR OTHER AUCTIONS FOR MORE NMTB-40 QUICK CHANGE TOOL HOLDERS. QUESTIONS CALL MATT 845-691-4140* WE WILL COMBINE SHIPPING* Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13e52e5273c-0xfc-
2)R8 cutter tool holders(1) 3/4' 1) 1/2" good condition made in japan. Paypal only USA shipping only. NO RETURNS
Assorted used parts from a variable speed mill. Either bridgeport or clone. As is.
This auction is for ONE"lot" of good used Bridgeport 6F& 8F Power feeds and Parts for power feeds. A short list of whats included is: 6F power feed complete Main drive shafts Main drive gears Handles Upper& Lower Housings Bearings Covers Front Plates What you see in the pictures is what you are bidding on and will receive. We will NOT sell any parts in this lot seperate. Use what you need and resell the rest. There is well over $3,000.00 in parts if sold as seperate pieces. These parts will have to ship in several boxes via UPS. WINNING BIDDER MUST CONTACT US AT THE END OF AUCTION FOR EXACT SHIPPING COSTS* ITEMS will NOT be shipped until winning bidder contacts us. We have several more parts for Bridgeports new and used. Including Kurt Vises, Servo, Acu-Rite, Kurt Power Draw Bars, If you don't see what you need please ... morefeel free to contact us. North American Machine Repair& Supply(586) 530-4686
used casting only no electric To replace this casting new will cost around $150.00 This unite comes with plate 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13e5347a14a-0x105-
ebay template EZ-TRAK DX 9"x48" CNC/ Manual Mill I TEM S OLD A S P ICTURED This 1994 EZ-TRAK DX has a 2-axis control that comes factory-fit with power feeds on the Series I standard mill. The control is easier to operate than conventional CNC. And far more productive than manual machining. 2D contouring capability lets you machine angles and radii without a rotary table. And it's a tremendous time-saver on repetitive work like bolt hole circles. As you put in the dimensions for each X- and Y- axis move directly from your blueprint. The easy-to-read screen displays and executes them. You can store thousands of individual operations. You can also"teach" the control how to machine the part by moving the table and hitting the"Enter" key at the end of each move to store the machine position. This machine has recently ... morebeen serviced by a technician to ensure it is in good working condition. FEATURES Bridgeport 2-Axis Control Machine operation alternates between automatic and manual Powerfeeds for both X-axis(longitudinal) and Y-axis(cross) 100 ipm Rapid Traverse 3HP DC Motor Chrome Ways Automatic centralized lubrication system SPECIFICATIONS*Specifications subject to verification INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines a
22" x 16" x 20" Bridgeport Torq-Cut 22. Vertical Machining Center, W/ DX- 32 Control. S/N 22-597, New 1997 Machine Specs: Table Size 14" x 33" Travels X 22" Y 16" Z 20" Spindle Speeds to 6000 RPM with two Gear Ranges. Spindle Taper Bt- 40. Spindle HP 7.5 HP 220 Volt 3- Phase. ATC 22 Position. Equipped With: Bridgeport DX-32 3 Axis CNC Control. RS232 Port and Disk Drive. Full Enclosure. Coolant. Auto Lube. Very Good Condition- Service by ex Bridgeport employee Inspect Under Power in Our Branchburg NJ warehouse. Questions Call dave@ 908-399-8133.
This is a pair of end cap bearing supports for the X-axis of Bridgeport type milling machines. These will need new bearings as the old ones are incomplete. But the castings(they are cast iron not aluminum) are in very good shape. Get'em while you can! Super fast FREE Priority Mail shipping included! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending ... moreupon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
SPI CHIP GUARD FITS KURT 6" MILLING VISE BRIDGEPORT VISE, SPI MILLING VISE CHIP GUARD P/N 63-391-7 FITS VISES FROM 5-3/4 TO 6-1/8" THIS HAS BEEN USED THERE ARE A FEW SCRATCHES IN THE PLASTIC WON'T AFFECT USE. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 14" BRIDGEPORT SENTRY SERIES OPTICAL COMPARATOR w/QUADRA-CHEK 2000 DRO. EDGE DET Ref# 148207 iammdna XCOMPA 14" BRIDGEPORT"SENTRY SERIES" OPTICAL COMPARATOR* QUADRA-CHEK MODEL 2000 ... more2-AXIS DIGITAL READOUT, FEATURING PROGRAMMABLE GEOMETRIC FUNCTIONS EDGE DETECTION* MODEL: PO-360HD S/N: 9025 NEW: 1990's TO EARLY 2000's SPECIFICATIONS: SCREEN DIAMETER. 14" TABLE SIZE. 5- 1/8" X 19- 3/4" LONGITUDINAL TABLE TRAVEL: 7- 1/4" THROAT CLEARANCE. 15- 1/2" HELIX ADJUSTMENT. +/ DEGREES FLOOR SPACE. 44" L-R X 46" F-B x 68" H EQUIPTMENT: SCREEN MOUNTED TO THE SIDE QUADRA-CHEK MODEL 2000 2-AXIS DIGITAL READOUT FEATURING PROGRAMMABLE GEOMETRIC FUNCTIONS& EDGE DETECTION DRO DISPLAY FOR THE SCREEN PROTRACTOR ANGLE MANUAL LONGITUDINAL TABLE TRAVEL MANUAL ELEVATION SURFACE ILLUMINATION SINGLE LENS MOUNT 10X LENS ELECTRICAL- 1/60/110 VOLT* INSPECT UNDER POWER IN OUR HARRISON. NJ WAREHOUSE* Machine Location: HARRISON. NJ Click Here For More Bridgeport Machines Click Here For More Inspection- COMPARATORS(s) Questions about this Machine? Call Andy at(800) 873-6224 ext 7600 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one o
1908 Rushmore SEARCHLIGHT Ad. REAL PHOTO: BRIDGEPORT CONN FIRE TRUCK. Firemen Rushmore Dynamo Works. Plainfield, New Jersey. This original Ad features a Large, Clear Real Photograph of the Fire Department of Bridgeport Connecticut on and around their Fire Truck equipped with a Rushmore Searchlight. When seconds are precious, and lives and property hang in the balance, ability to make good is the only thing that matters. This original ad measures approx. 5" x 8" It is on a page that is 8 3/4" x 11 3/4" Excellent Condition. Very Clean. No tears. Stains, or creases. Small edge tear is tape repaired on reverse side. The paper is white/ivory and very flexible. No age toning or brown spots. Winning bidder to add $3.50 for careful packaging and shipping to anywhere in the U.S. Intl. locations will be more. Normal 0 false false ... morefalse EN-US X-NONE X-NONE PLEASE NOTE: As of Feb 1. 2013 the U.S. Post Office has dramatically increased shipping costs for International packages. Regretfully, the Intl. Shipping Fee will now be raised to $13.50, except for Canada which will be $9.50. You only pay the Shipping Fee once, no matter how many ads(or other single page paper items) you buy. PayPal Preferred. No Checks. Thanks for looking! Powered by On Jan-13-13 at 05:06:23 PST. Seller added the following information:
Bridgeport Controls Circuit Board SN185 P/N 2928472 Board back# 026289-B I will guarentee this board to not be DOA. I have sold about 5 out of this lot and all have been good)
THIS IS A 9 X 42 SERIES I BRIDGEPORT WITH A BANDIT 3 XIS CNC CONTROL.TOOL CHANGER,NBT-30 TOOLING,ELECTRIC POWER DRAW BAR,COMPUTER CONTROLLED SPEEDS,BRAKE AND LOCK. AUTO ONE SHOT LUBE. ALL SEEMS TO BE IN GOOD WORKING CONDITION BUT MOTOR DOES NOT COME ON. ALL THE AXIS WORK MANUALLY AND DRO WORKS. IT IS WIRED 230 VOLT 3 PHASE. YOU CAN FIX THE CONTROL,RETROFIT WITH NEWER CONTROL OR USE IT LIKE A MANUAL MILL WITH DRO& POWER FEED, AND ATTACH A DRUM SWITCH FOR THE MOTOR. FLOOR SPACE 60 X 48 X 85 HIGH 2600 LBS FOR ANY QUESTIONS CONTACT GERRY VIA EMAIL OR 727-547-0616. BUYER PAYS ACTUAL SHIPPING FROM 33782. LOCAL INSPECTIONS AND PICKUPS WELCOME. CALL TINA FOR SHIPPING QUOTES@ 727-362-8318. I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. ... moreBuyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping. And the item is shipped, YOU. The BUYER. Are now responsible, along with the shipping service provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges. Such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 41 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Bid with confidence! On Jan-04-12 at 21:58:06 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
TAPMATIC 70X REVERSING TAPPING HEAD 1/2" SHANK BRIDGEPORT#10-5/8" CAPACITY, TAPMATIC 70X TAPPING HEAD 1/2 SHANK. VERY GOOD CONDITION AS SHOWN. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13e54118120-0x102-
FREIGHT Shipped banded to a Pallet OR LOCAL PICKUP ONLY 6-1/2" Tall main body 6-7/8" Tall Overall 10.992" Diameter hole at the top 14.948" Outside Diameter Main body near the top It seems to measure approx. 12.505" outside diameter at the recessed section at the top 14.947" Outside Diameter main body at the bottom 12.507" Hole diameter at the bottom The bolt pattern measures 6-3/4" x 9-5/8" and the holes in the riser are approximately.580" diameter so just over 9/16" I am willing to ship this item banded to a pallet. See details below about banding it to a pallet. I do not list a shipping amount. I have no way to know what zip code it will ship to before it sells and zip code and weight are of course what determines the cost, plus shipping amounts do change occasionally and at our warehouse ... morewe do have walk in customers that buy items, so I do not package items up or band them to a pallet until they sell, plus this way I can also combine items for you without repacking things which saves you money and saves me time. If you would please wait to pay until I send you an invoice, then I will get this item banded to a pallet, get a shipping quote and send you a total for the shipping amount. Of course if you want a shipping quote before you buy it, and that's usually a good idea, just send me an email. I will load it on your truck or trailer for FREE. I will not box it up and ship it via UPS or similar carrier. Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within 30 days of receiving it. And if it is in the same condition as when I first shipped it, and if you are willing to pay for shipping both ways. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 49534 616-791-9395 Buyer pays all shipping costs. If it needs to be banded to a pallet there is a $25.00 fee for the pallet. Strengthening the pallet, blocking it in with boards to keep it from moving around on the pallet and banding it. If you
Condition: Good used condition. Surface rust, sharp edges, Please ask any and all questions prior to auction close as this item is sold a s is with no warranty or returns. Feedback. WE WANT POSITIVE FEEDBACK- Feedback left after feedback received! Did you know? On eBay. A NEUTRAL feedback rating is treated exactly the same as a NEGATIVE feedback? Please do not leave a negative or neutral feedback without contact from us to help resolve any issue! We are committed to satisfaction of your purchase. If you are not satisfied with your purchase in anyway please give us an opportunity to make it right before leaving feedback. You may ask a question through ebay's contact a seller section. CUSTOMER SERVICE all out of country bidders please ask about the cost of shipping to your country
This stepper comes from my working Series 1 Bridgeport BOSS 5 CNC machine. I have finally decided to part it out though I really did not want to do this. I have 3 steppers to sell and all are in good working condition. Would prefer to sell the whole machine if there is interest.
This chuck is made in Spain. Jaws open from 0-5/16. Used but in good shape. Don't know what else to describe about it.
BRIDGEPORT TEXTRON PROGRAMMING MANUAL FOR SERIES 1 ONE CNC MILL/ MILLING MACHINE. CNC/ NC, NUMERICAL CONTROL- USED w/WARRANTY. This listing is for a manual. Make: Bridgeport/ Textron, Model/ Part# 1104029, Description: Programming Manual for Series 1(One) CNC/ NC Mill, Please note that we(Kellan Inc) are a commercial and industrial surplus product dealer. We acquire our products from company closures. Obsolete systems, government surplus, overstock, etc. Unless otherwise indicated, all products include our 14-day warranty. However, most products do not include a"manufacturer's warranty" We present our surplus products as accurately as possible. Please note that our products only include the pictured items. If an item is not in the picture(i.e. a power adapter. Electrode, original packaging, etc. it is likely not included. That ... morerule applies to"new in box" and"new, no box" items. Sometimes, if the original packaging has a lot of shelf-wear, we will discard it. If you have any questions about this, please contact us prior to purchasing. CONTACT US Kellan Inc 8011 S Avenida del Yaqui Guadalupe. AZ 85283 USA. Phone(Local and International) 480) 229-1215 Fax: 480) 247-4985 Email: We do not publish our email address in our marketplace listings. Please use the"Ask Seller a Question" option. PAYMENTS- EBAY PAYMENTS We accept PayPal and credit cards(Visa. Mastercard, American Express and Discover) on our eBay sales. We can also process other payment methods. If you are unable to pay using PayPal, please contact us. Payment is expected within 10 days of the sale. If payment is not received. An unpaid case will be filed. PAYMENTS- ADDITIONAL PAYMENT REQUESTS We only accept eBay orders via eBay's website. All eBay orders must be finished through eBay. If you need to purchase a product you see. Buy it on eBay. Then, if needed, we hav
BRIDGEPORT TEXTRON 1104029 PARTS MANUAL FOR SERIES 1 ONE CNC MILL/ MILLING MACHINE. CNC/ NC, NUMERICAL CONTROL- USED w/WARRANTY. This listing is for a manual. Make: Bridgeport/ Textron, Model/ Part# 1104029, Description: Parts Manual for Series 1(One) CNC/ NC Mill, Please note that we(Kellan Inc) are a commercial and industrial surplus product dealer. We acquire our products from company closures. Obsolete systems, government surplus, overstock, etc. Unless otherwise indicated, all products include our 14-day warranty. However, most products do not include a"manufacturer's warranty" We present our surplus products as accurately as possible. Please note that our products only include the pictured items. If an item is not in the picture(i.e. a power adapter. Electrode, original packaging, etc. it is likely not included. That rule ... moreapplies to"new in box" and"new, no box" items. Sometimes, if the original packaging has a lot of shelf-wear, we will discard it. If you have any questions about this, please contact us prior to purchasing. CONTACT US Kellan Inc 8011 S Avenida del Yaqui Guadalupe. AZ 85283 USA. Phone(Local and International) 480) 229-1215 Fax: 480) 247-4985 Email: We do not publish our email address in our marketplace listings. Please use the"Ask Seller a Question" option. PAYMENTS- EBAY PAYMENTS We accept PayPal and credit cards(Visa. Mastercard, American Express and Discover) on our eBay sales. We can also process other payment methods. If you are unable to pay using PayPal, please contact us. Payment is expected within 10 days of the sale. If payment is not received. An unpaid case will be filed. PAYMENTS- ADDITIONAL PAYMENT REQUESTS We only accept eBay orders via eBay's website. All eBay orders must be finished through eBay. If you need to purchase a product you see. Buy it on eBay. Then, if needed, we have ad
Bridgeport Series I Miller(Inv.28712) 2 HP Variable speed 42 in. table S/N 363870781W One shot lube Chrome ways Coolant base. No coolant pump Collet rack and misc. collets machine cleaned and cycled 2100 lbs. Inv.28712) MFS#2003 Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for ... moreinternational sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Powered by
Machine is in good condition. Both the X and Z servo motors have been rebuilt and the 12K spindle sounds good. The machine is a 30HP 40 X 20 X 20 with a Fanuc 18I-M control. The 30 ATC changer has 6 bad pockets. But the rest work great. Machine has been run on 1 shift in our plant for the past 2 years making aluminum molds with finishes and tight tolerances. It is under power for for inspection. We do have the manuals for the machine and control. Contact: Chris Flanagan 713-503-2801. Or Chris@precisionurethane.com I will then send a link to a You Tube Video of the machine for review.
Antique. And Dated 1860, Civil War era Woodcock Bros- Bridgeport, Ohio Cast Iron Church, School or Dinner Bell. All original, complete with Bell, Clapper, handle and Yoke and measures 16" across and has a nice loud ring and sounds great. In raised lettering around the rim, it reads, Woodcock Bros. Bridgeport, Ohio 1860" It is hand forged connecting the bell to the top casting. Please see pictures. It is heavy and weighs around 75 pounds. This is a Great piece of Civil Ware Era and Ohio history that is in original- untouched condition. I will ship or you can pick it up here in Columbus. The buyer pays shipping cost. Thanks! Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e56a850b2-0xfb-
B3 collet that probably has little use since the ink stamped Bridgeport name is still crisp and legible. 3/8" round. Very hard to find. Probably came out of a cherrying head. Free shipping 48 states. Thanks; Craig 330.547.6300
THIS AUCTION IS FOR A VINTAGE ORIGINAL BRIDGEPORT"BOY SCOUT" HATCHET WITH NAIL PULLER. HAS A CLEAN STRONG"BE PREPARED" SCOUT EMBLEM. CLEARLY MARKED: BRIDGEPORT MADE IN U.S.A. with U.S. PAT. 1830663. SOLID STEEL BLADE AND HANDLE BETWEEN TWO PIECES OF HARDWOOD IN EXCELLENT CONDITION WITH SOME OF THE RED PAINT REMAINING. NO DAMAGE.JUST NORMAL WEAR FROM AGE AND USE.SEE PICTURES. OVERALL LENGTH MEASURES 13-1/4" PLEASE RESOLVE ALL INQUIRIES PRIOR TO PLACING YOUR BID. ALL PICTURES ARE A PART OF THE DESCRIPTION.
Used in very good condition Bridgeport sine plate. Nice small size 5 inches between rolls. Base is 6-3/8" by 7" Buyer to pay shipping on 36 pounds. Due to excessive and abusive negative feedback from Canadians. I no longer sell to Canada. Powered by The free listing tool. List your items fast and easy and manage your active items.
HARDINGE 5C HORIZ- VERTICAL INDEXER BRIDGEPORT MILL, HARDINGE HORIZONTAL VERTICAL 5C INDEXER HV-4-5C. 24 DIVISION INDEX PLATE GOOD CONDITION. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13e5a56e882-0xfa-
SquareTrade © AP6.0 VERY NICE BRIDGEPORT VERTICAL MILL MODEL BH 939 WITH ANILAM DIGITAL READ OUT Prev Stop Play Next You are bidding on a Bridgeport Vertical Milling Machine. Model: BH 939. This is a very nice mill in excellent condition and it is fully guaranteed. 32" X 9" 3 Slotted Table Spindle Speeds: 80-2720 RPMs Anilam 2 Axis DRO Belt Driven Head 1 HP Motor. 200-230/380/460 Volts We would be happy to load on your truck at no charge or assist in planning the most economical delivery. Any questions? Email us NO RESERVE Please click here to see my other auctions.
One used and 1 regrind 1" HSS. 4 flute end mills. 1) Putnam 1" Regrind. Looks to be sharpened just one time, probably.01" to.03" under. 1" shank, 2" LOC, 4 1/2" OAL 1) Putnam 1" used& not a gegrind. 1" shank, 2" LOC, 4 1/2" OAL, check out the pictures for condition. Item in the picture is the one you will receive. I do not ship outside the USA PayPal only
FOR SALE: Original Bridgeport VMC 760/DX Bridgeport DX-32 Installation. Operation, Parts and Maintenance Manual Marked as used because it is not in original packaging and top page being slightly worn. Part Number 1104-2711 September 1995 Posted with eBay Mobile Posted with `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13e5bb2be55-0xf2-
TLAUF Board for Bridgeport Milling Machine. PN 31944343. In good working order.
Up for bid: Early Bridgeport. Connecticut Badge. It says EC&BCo#39 Bridgeport, Conn. I am unsure if this is a fire badge? or police badge? The badge once had a T-Pin which has been replaced. It measures approx. 1 1/2" W x 2" H. Please judge photo's for yourself. ALL MY BADGES COMPLY WITH EBAY GUIDE LINES. EITHER BEING OVER 75 YEARS OLD. FROM A DEFUNCT AGENCY, OR A STYLE NO LONGER IN USE. THEY CARRY NO AUTHORITY OR POWER. Bid confidently as I have 100% positive feedback. Any questions or if you need add. pics please message me.
9" x 42" Bridgeport Vertical Milling Machine Model"J" S/N 83375 Machine Specs: Table Size 9" x 42" Travels Long 30" Cross 12" Quill 5" Knee 16" Spindle Taper R-8. HP 1 HP 220 Volt 3 Phase. Speeds 80- 2720 RPM. Feeds.006. 003 and.0015 Weight 2000 Approx. Equipped With: Chrome Ways. One Shot Lube. 6" Milling Vise with Swivel. Boring Head. Drill Chuck. 7) R-8 Collets. Good Working Machine. Inspect Under Power in Our Branchburg NJ Warehouse. Questions Call Dave@ 908-399-8133.
THIS AUCTION IS FOR A LARGE LOT OF 20 USED BRIDGEPORT/ERICKSON BTC-1 TOOLHOLDERS. COLLET'S AND CHANGING BLOCK. THESE CAME OUT OF A VOCATIONAL SCHOOL LOOKS LIKE THEY HAVEN'T BEEN USED MUCH AT ALL! HOLDERS: 10) 75HTG C141192(1 MISSING NUT) 3) C143105 DA COLLET HOLDER(1 MISSING NUT) 2) C142857 D08 TAPPING HOLDERS(1) C142858 F08 TAPPING HOLDER(1) C143096 3/4" STRAIGHT HOLDER(1) C143095 5/8" STRAIGHT HOLDER(2) C143093 3/8" STRAIGHT HOLDER(1) TOOL CHANGING BLOCK. COLLET'S: 9) ERICKSON 300. 1/16, 3/32, 1/8, 5/32,11/64, 3) 3/16& 7/32(4) ERICKSON TAP COLLET'S D168.D194,D220,D255(8) ERICKSON 200. 1/8, 3/16, 7/32, 1/4, 9/32, 2) 11/32& 3/8(9) ERICKSON TAP COLLET'S 1/8 NPT. 1/4 NPT, 255,318, 323, 367, 381, 688, 700(21) ERICKSON TG75(6) 3/4. 4) 1/2(ONE STRUCK IN HOLDER) 4) 3/8, ONE COLLET OF THESE SIZES: 1/4.17/64,5/16,21/64,13/32,7/16,9/16 ... morePLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. PLEASE EMAIL IF YOU HAVE ANY QUESTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
Quantity one available. Used 1981 Bridgeport vertical milling machine. 2 horsepower series 1. 9" x 42" table. Travels X 30" x Y 12" x Z(knee) 16" Quill stroke is 5" Comes with 2 axis readout Mitutoyo 982-537-1. 230/ 460 volt 3 phase currently wired for 230 v. Comes with SO power cable and twist lock plug. Disconnect safety switch and 120 volt transformer for readout and work light on rear. Continuously variable speed 60 to 4200 rpm in 2 ranges. Manual draw bar and R-8 taper spindle. Decent used condition. There is a 1/2" diameter divot in the table from someone not paying attention. Work light and 1 shot lube pump. Approximate size 60" x 60" x 86" tall. Approximate weight 2,000 lbs. Shipping from Farmington Hills MI 48336. Local pick up and inspection under power is welcome. We can load to ... moreyour truck or common carrier with overhead crane or forklift at no extra charge. We can put this machine on a heavy duty pallet and prepare for shipping at no extra charge. Please ask if any questions.Anthony 248-514-0567. c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13e5e451543-0xf6-
Here is a Bridgeport shaper attachment. It has a 230/460 3 phase motor. It works fine. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All international bidders are subject to a $20.00 fee to cover additional paperwork. Multiple purchases on the same day will only be charged one fee. All international shipments will be through the U.S. post office ONLY. Payment will be via an international money order. Sales tax is charged for PA sales unless exempt*
Here is a Bridgeport right angle head that fits all the 1 h.p. J-head and 1.5-2 h.p. 2J head machines. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All international bidders are subject to a $20.00 fee to cover additional paperwork. Multiple purchases on the same day will only be charged one fee. All international shipments will be through the U.S. post office ONLY. Payment will be via an international money order. Sales tax is charged for PA sales unless exempt*
Here is a 1" diameter Bridgeport R8 horizontal arbor. It does not have a name on it so it may not be factory Bridgeport. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. All international shipments will be through the U.S. post office ONLY. Sales tax is charged for PA sales unless exempt*
THE HEAD HAS NO NOISE VERY NICE COMES WITH A KURT 6" VISE ENDMILL ASSORTMENT R8 COLLET SET DRO READOUT. SERVO POWER FEED X, AND Z FEEDS VARI SPEED HEAD IS IN EXCELLENT SHAPE 48" TABLE I SHOT LUBE WE INSTALLED THE SERVO FEED AND A DRO PLEASE CALL FOR A SHIPPING PRICE AVERAGE SHIPPING IS AROUND 500 TO 800 USA. CALL FOR A SHIPPING PRICE.
THIS IS A NICE HEAD 2 HP 3 PHASE CAME OF A BRIDGEPORT MILL THE PRICE IS ABOUT THE THIRD OF A NEW HEAD FROM BRIDGEPORT HARDINGE R8 SPINDLE WE HAVE TOMASNY BRIDGEPORTS INSTOCK WE ARE SELLING THE GOOD HEADS CALL FOR A SHIPPING PRICE
THIS IS USED TO DISENGAGE AUTOMATIC FEED IN EITHER DIRECTION AS WEL AS THE SETTING POINT FOR WORKING TO GIVEN DEPTHS.
Hello. Up for auction is this used Brideport Series I milling machine table end bracket. Bracket includes bearing and 4 screws. Part overall in V.G. shape. Bridgeport Code Number for this part is 12060115, the number H-115 is cast in back of part. This part is for 9" wide table. Buyer pays $12.85 for shipping, item sent USPS Priority flat-rate. I accept Paypl for payment. Feel free to ask questions, thanks for looking.
BRIDGEPORT MILL MODEL 26386 S/N J15269 NEW 3/82. PLEASE CALL SCOTT AT 262-377-4774 FOR MORE INFORMATION. ITEM IS LOCATED IN LENOIR CITY. TN. LEMKE MACHINERY SALES HAS A LARGE SELECTION OF USED MACHINERY AND NEW AND USED TOOLING. CALL US FOR ALL YOUR MACHINERY NEEDS. BUYER IS RESPONSIBLE FOR ALL RIGGING AND SHIPPING CHARGES. THANK YOU FOR LOOKING AND CHECK OUT SOME OF LEMKE MACHINERY SALES ITEMS IN OUR EBAY STORE.
BRIDGEPORT MILL MODEL B5466 W/ TYPE 140 SERVO FEED HEAD. PLEASE CALL SCOTT AT 262-377-4774 FOR MORE INFORMATION. ITEM IS LOCATED IN LENOIR CITY. TN. LEMKE MACHINERY SALES HAS A LARGE SELECTION OF USED MACHINERY AND NEW AND USED TOOLING. CALL US FOR ALL YOUR MACHINERY NEEDS. BUYER IS RESPONSIBLE FOR ALL RIGGING AND SHIPPING CHARGES. THANK YOU FOR LOOKING AND CHECK OUT SOME OF LEMKE MACHINERY SALES ITEMS IN OUR EBAY STORE.
Servo Amplifier for Bridgeport CNC mill. PN 31944088. I good working condition
Full page ad 11x14 from Fortune Magazine. FREE postage in the USA Please check my other ad auctions.
FIRSTLY I KNOW LITTLE ABOUT ENGINEERING TOOLS.PLEASE CHECK THE PICTURE OR ASK QUESTIONS TO CONFIRM MY DESCRIPTION IS CORRECT BEFORE BIDDING TOP QUALITY KENNAMETAL SIDELOCK END MILL HOLDER 20mm IN ALMOST NEW CONDITION AS PICTURED FROM AN ENGINEERING WORKS CLOSURE QUESTIONS?RING PAUL ON 07828 234373
SquareTrade © AP6.0 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A Bridgeport/ Erickson BTC-1 TG75 COLLET CHUCK Tool Holder C141192 Normal 0 false false false EN-US X-NONE X-NONE AS ALWAYS WE WILL COMBINE SHIPPING CHARGES YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES Normal 0 false false false EN-US X-NONE X-NONE Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL US AT 937-672-9876. Be sure to add me to your favorites list! THREADS.
Well we have just taken in a complete Machinist Tool Cart loaded with Model Maker/ Tool Maker fixtures. Measuring equipment, cutters, borescopes etc. We have to empty the top tool box, 2-drawer riser, main roll around base& side drawer hanging cabinet. All keys are with the boxes, all tools are a little aged from sitting but its tool steel so easy to clean up with a little elbow grease. Once the contents are sold the Tool Cart will be listed for auction, LOCAL pick up, but we can deliver to select locations. This stuff is heavy so in most cases we will be using USPS Flat Rate shipping so box size will determine price. We will try to fit as much in a small. Medium, or large box as we can, so if you buy multiple items we will discount shaping where ever possible. We do ask that multi item winners wait for the Final Invoice before paying ... morefor their purchase in the case we can save you shipping costs. All listings will look the same. they all have this header. just trying to save time. Look at pictures. Ask questions, and if needed we can answer any questions. We will try to describe item as well as possible, add dimensions if needed and hopefully catch any issues. Most items just need cleanup, some were made by the previous owner, a Journeyman Model Maker, who went through apprenticeship with a local Fortune 500 company. If any names or initials are on these it usually says Doug or DEK. Just a heads up that when we say the item is marked it means it has that name. Please ask questions, all sales FINAL. Ok this auction is for a 5C Collet Set. quick tool lock. Armstrong wrench, Hex and Square Blocks Great item. Look at all other listings we have, we will list tools exclusively until the box is empty. Posted with
Teeth are in good shape. What you see is what you get. I accept returns.
aims BRIDGEPORT 5/8" BORING HEAD No.2 w/ R8 SHANK + CASE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Bridgeport. This is a Bridgeport Boring Head with Accessories& Case in PRISTINE condition. Model# 2 Specifications: Head Diameter: 3.35" Overall Head Length: 2-7/8" Boring Bar Hole Size: 5/8" Shank: R8. Overall Length: 7" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. BRIDGEPORT 5/8" BORING HEAD No.2 w/ R8 SHANK + CASE BRIDGEPORT 5/8" BORING HEAD No.2 w/ R8 SHANK ... more+ CASE BRIDGEPORT 5/8" BORING HEAD No.2 w/ R8 SHANK + CASE Reliable Tool Inc. c 2011 | Powered by
good used index plate Bridgeport USA# 4 approx 5 1/2" dia x 1 1/8" hole 59. 46, 38, 32 and 26 holes will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
good used index plate Bridgeport USA# 2 approx 5 1/2" dia x 1 1/8" hole 49. 43, 35, 29 and 10 holes will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13e62dd72b5-0xf9-
One used Accupro solid Carbide End mill. Four Flute, ALTIN, 5/8" dia. of cut, 5/8" shank, 2 1/8" LOC, 4 5/8" OAL Item in the picture is the one you will receive. I do not ship outside the USA PayPal only
UP FOR AUCTION IS A BRIDGEPORT TAIL STOCK. APPROXIMATE CENTER HEIGHT 8 INCHES. THE TAIL STOCK IS USED. HAS SOME SURFACE RUST AND MISSING FINISH. SEE PHOTOS FOR DETAIL AND CONDITION. THANKS FOR LOOKING
BRIDGEPORT MILLING MACHINE ARBOR FOR RIGHT ANGLE HEADS 1" ARBOR SHOULDER TO NUT 8-17/32" RH NUT o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13e642a9964-0xfd-
THIS AUCTION IS FOR A BRIDGEPORT EZ-CAM. VI EZ-EDM& REFERENCE MANUAL(1992) THIS MANUAL IS IN USED CONDITION! SEE PICTURES" PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. PLEASE EMAIL IF YOU HAVE ANY QUESTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
THIS AUCTION IS FOR A BRIDGEPORT EZ-CAM VI. UTILITIES& REFERENCE MANUAL(1991) THIS MANUAL IS IN USED CONDITION! SEE PICTURES" PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. PLEASE EMAIL IF YOU HAVE ANY QUESTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
USED BRIDGEPORT CNC BOARD VCC 2926276-023600 WAS SOLD TO ME AS GOOD BUT MY MACHINES ARE NEWER SO I CAN NOT TEST. SEE REPAIR IN PHOTO 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13e6518cb39-0xf4-
USED BRIDGEPORT CNC BOARD RCK MARKED 2926755 BACKWIRED POSSIBLE BOSS 3 WAS SOLD TO ME AS GOOD BUT MY MACHINES ARE NEWER SO I CAN NOT TEST. EMAIL OR CALL WITH QUESTIONS 704-279-2560