In 
 
Order by: 
Available to: 
Price: 
 - 
$
134
Buy It Now
$17.5 Shipping
Condition: New
Location: Taylorsville,NC,USA
HI YOU ARE LOOKING AT A POWER DRAW BAR FOR A VARIABLE SPEED R8 COLLET IMPORT AND BRIDGEPORT TYPE MILLING MACHINE. JET. MSC, ATRUMP, WT TOOL, ACRA, ACER, ... moreCHEVLAIR, ENCO, TRAVERS, SUPERMAX, AND MANY MORE. THE MOST SIMPLE AND ECONOMICAL POWER DRAWBAR OUT THERE. IT WORKS FROM AIR PRESSURE 90 PSI MAX. YOU JUST PULL DOWN ON THE HANDLE AND MOVE IT LEFT OR RIGHT TO LOOSEN OR TIGHTEN THE DRAW BAR, LET GO OF THE HANDLE AND IT RETURNS TO TOP AUTOMATIC. A HUGH TIME AND AGGRAVATION SAVER NO LOST TIME LOOKING FOR YOUR WRENCH OR HAMMER. MAIN BODY MADE OF 6061 ALUMINUM, MAIN FRONT SLIDE IS MADE WITH STEEL ROD AND NYLON BUSHING, FOR LONG LIFE AND TO DAMPEN ANY VIBRATION FROM THE HEAD. ONE SCREW REMOVES TOP PART TO GIVE ACCESS TO DRAW BAR. CAN BE MOUNTED IN MANY POSITIONS AROUND THE HEAD TO FIT YOUR OWN PREFERENCE. HANDLE FULLY ADJUSTABLE TO FIT YOUR PREFERENCE AND TO TAKE UP ANY WEAR THAT MAY TAKE PLACE OVER TIME. USES ORIGINAL DRAWBAR SO NO SPECIAL DRAW BAR TO BUY. COMES ASSEMBLED COMPLETE WITH IMPACT WRENCH READY TO MOUNT ON YOUR MILL AND USE. IF YOUR COLLET STICKS IN THE SPINDLE RETURN THE IMPACT TO THE TOP AND BRING IT DOWN AND STRIKE THE DRAWBAR AS YOU WOULD WITH A HAMMER THERE IS ALSO A REGULATOR BUILT IN THE IMPACT WRENCH TO KEEP FROM OVER TIGHTENING THE DRAWBAR. WE DESIGNED THIS POWER DRAW BAR IN OUR SHOP AND HAVE SOLD OVER 400 UNITS WITH GREAT RESULTS THERE ARE COPIES OUT THERE SO BEWARE GET THE ORIGINAL. ALL OF THE MAIN BODY IS MADE AND ASSEMBLED IN OUR SHOP HERE AT M&T MACHINE, TAYLORSVILLE N.C. 28681 USA. WE HAVE USED THIS TYPE POWER DRAW BAR IN OUR SHOP FOR MORE THAN 10 YEARS WITH NO PROBLEMS. WE OFFER A FULL 30 DAY FULL REFUND IF YOU ARE NOT FULLY PLEASED WITH THIS ITEM. ANY QUESTIONS CALL 828-632-1500 HOME. PLEASE CHECK OUR EBAY FEEDBACK AND PLEASE LOOK AT OUR EBAY STORE WE HAVE OTHER TIME AND LABOR SAVER MACHINE SHOP TOOLS FOR SALE AS WELL AS POWER DRAWBARS FOR STEP PULLEY HEADS THANK YOU VERY MUCH FOR LOOKING TODD AND SHANNON
$
8,900
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Plainville,CT,USA
$
16,995
Buy It Now
$0 Shipping
Condition: Used
Location: Lake in the Hills,IL,USA
$
6,999
Buy It Now
$0 Shipping
Condition: Used
Location: Roseville,MI,USA
$
9,500
Buy It Now
Free Shipping
Condition: Used
Location: Portland,CT,USA
$
150
6d 2h 12m 30s
0 bids
$30 Shipping
Condition: New – Open box
Location: Ireland
$
17.99
Buy It Now
$0 Shipping
Condition: New
Location: Broadview Heights,OH,USA
$
3,600
Buy It Now
Free Shipping
Condition: Used
Location: Coffeyville,KS,USA
$
9,950
Buy It Now
Free Shipping
Condition: Used
Location: Harrison,NJ,USA
$
27.5
Buy It Now
$0 Shipping
Condition: New
Location: Rosemead,CA,USA
$
9,500
Buy It Now
Free Shipping
Condition: Used
Location: Harrison,NJ,USA
$
9,800
Buy It Now
$0 Shipping
Condition: Used
Location: Chambersburg,PA,USA
aims BRIDGEPORT 9" x 42" VERTICAL MILLING MACHINE- 8-SPEED read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 ... morePM TO 4:30 PM PST Made in the U.S.A. by Bridgeport Machines Inc. of Bridgeport. Connecticut. This is a used Multiple Speed Vertical Milling Machine in working condition. Serial# 26621 Features: 8 Speeds(belt/pulley) 1 Horsepower Spindle Motor. 4" Riser Block. Specifications: Table: Overall Size: 42" x 9" T-slots: 3@ 2.5" centers T-slot Size: 0.625" Table Load: 750 lbs. Height Above Floor: 47-1/4" Travels: Table Travel(X-Axis) 30" Saddle Travel(Y-Axis) 9" Knee Travel(Z-Axis) 16" Quill Travel: 5" Ram Travel: 12" Spindle: Throat Distance: 6.75"min. 18.75" max. Table to Spindle Nose: 2.5" min. 18.25" max. add 4" with riser block Spindle Diameter: 1.875" Quill Diameter: 3.375" Quill Feed: 0.0015/ 0.003/ 0.006 in.rev Taper: R8 Speeds(8) 80 to 2.720 rpm(80- 135- 210- 325- 660- 1,115- 1,750- 2,720) Head Adjustments: Head Cant(forward/back) 45 degrees Head Tilt(side to side) 90 degrees Head Swivel(side to side) 360 degrees. General: Motor: 1 Horsepower. 1,745 rpm, 220/ 440 Volt, 4.2/ 2.1 Amps, 60 Hz Electrical: 220/ 440 Volt. Three Phase(currently wired for 220 Volt) Overall Dimensions: 58" x 58" x 80" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. BRIDGEPORT 9" x 42" VERTICAL MILLING MACHINE- 8-SPEED BRIDGEPORT 9" x 42" VERTICAL MILLING MACHINE- 8-SPEED BRIDGEPORT 9" x 42" VERTICAL MILLING MACHINE- 8-SPEED BRIDGEPORT 9" x 42" VERTICAL MILLING MACHINE- 8-SPEED BRIDGEPORT 9" x 42" VERTICAL MILLING MACHINE- 8-SPEED BRI
$
8,950
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Elk Grove Village,IL,USA
$
6,700
Buy It Now
Free Shipping
Condition: Used
Location: Portland,CT,USA
$
5
Buy It Now
$8 Shipping
Condition: New
Location: Fullerton,CA,USA
Brand new replacement Chrome Plated Revolving Handle Grip. Fits on most mills. Including Bridgeports and Bridgeport style mills. 3/8" 24 thread. ... moreLength= 4" Please call us if you have any question at 714-632-9701. Info@aceronline.net You can pick up from Anaheim. California or Piscataway, New Jersey or we will ship via UPS Ground. Anaheim Office 1062 N. Kraemer Place Anaheim. CA 92806 Piscataway Office 244 N. Randolphville Road Piscataway. NJ 08854 www.aceronline.net This item might be out of stock. If it is out of stock. The lead time is approximately 6~8 weeks. Here are your options if the item is out of stock: 1. You can wait for the item to come in in the 6~8 weeks time frame. or 2. We can cancel your order and get a full refund of your money. Payment Supra Machine Tool accepts: PayPal. Visa, Master Card, American Express, Money Orders, Cashier Checks, Wire Transfer as payment of goods purchased in our store. Please send payment to 1062 N. Kraemer Place, Anaheim, CA 92806) All payments must be received within 7 business days. Bidders can call 714-632-9701 or info@aceronline.net for further information. All buyers residing in California add 8.75% sales tax. Shipping and Handling Buyer pays the Shipping charge based on UPS Ground Shipping Charges. Orders being shipped to P.O. Boxes will be delivered by United States Postal Services(USPS) Note: Weight restrictions may apply in some cases. Buyers can check for shipping rates at www.usps.gov) Orders under 150 lbs. can be shipped by U.P.S. Freight prepaid or collect. Orders above 150 lbs. will be shipped by freight carrier. Supra Machine Tool offers a group of carriers that can quote you with an estimate of shipping charges for all items. Check www.conway.com. Www.roadway.com. Estimated delivery time by UPS is from 2 to 6 business days from the time the order is processed. International buyer pays the actual shipping charge + $5.50-$7.50 handling fees. International shipments of 150 lbs or more can be made by Skyworld International. Buyers are responsib
$
34
Buy It Now
Free Shipping
Condition: New
Location: Broadview Heights,OH,USA
Looks used to me Tried to supply good pics Was on a shelf in a tool room at a warehouse we did extensive renovations to. Don't hesitate to ask questions. ... morePosted with
$
6,999
Buy It Now
Free Shipping
Condition: Used
Location: Canada
$
100
4d 22h 25m 33s
0 bids
$150 Now
$40 Shipping
Condition: Used
Location: Hayward,CA,USA
Trav-a-dial bracket br-1 for a bridgeport milling machine
$
6,500
Buy It Now
$0 Shipping
Condition: Used
Location: Oxnard,CA,USA
$
119.7
Buy It Now
$0 Shipping
Condition: New
Location: Westbury,NY,USA
$
9,950
Buy It Now
Free Shipping
Condition: Used
Location: Toledo,OH,USA
$
1,777
Buy It Now
$0 Shipping
Condition: Used
Location: Apple Valley,CA,USA
$
109
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
2,500
Buy It Now
$0 Shipping
Condition: Used
Location: Riverside,RI,USA
$
4,500
Buy It Now
Free Shipping
Condition: Used
Location: Wilmington,DE,USA
$
75
Buy It Now
$0 Shipping
Condition: For parts or not working
Location: Costa Mesa,CA,USA
$
11,850
Buy It Now
$0 Shipping
Condition: Used
Location: Oxnard,CA,USA
$
3,450
Buy It Now
Free Shipping
Condition: Used
Location: Watertown,CT,USA
$
6.99
Buy It Now
$0 Shipping
Condition: New
Location: Milford,CT,USA
$
4,950
Buy It Now
Free Shipping
Condition: Used
Location: Milwaukee,WI,USA
11" x 58" Bridgeport Model Series II Vertical Milling Machine. S/N 1299 Mill Clean Series II Bridgeport Milling Machine with Power Feed Quill. ... moreRuns Great! Manufacturer: Bridgeport Model: Series II S/N: 1299 Specifications: Table Size 11" x 58" Longitudinal Table Travel 30" Cross Saddle Travel 15" Vertical Knee Travel 16" Spindle Speeds(Variable) 50- 3.500 RPM Spindle Nose#40 Spindle Quill Travel 5" Spindle Quill Feeds(Variable) 0.6- 2.5 IPM Ram Travel 16" Throat Distance 10 1/2" 26 1/2" Max. Work Piece Weight 500 Lbs. Machine Weight 5.250 Lbs. Equipped With: Power Draw Bar 3 Axis Power Feeds With Rapid Traverse Chrome Ways Auto Lube System Horsepower: 4 Machine is sold as is as shown Will Load FREE of charge. Buyer is responsible for freight or pickup. Contact Adam at 219-951-0219 or by emailing this posting.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13def12fd18-0xfb-
$
119.7
Buy It Now
$0 Shipping
Condition: New
Location: Westbury,NY,USA
Better Values Friendly Service Fast Shipping BRAND NEW Power Feed Y Axis Unit overall dimension: 5'L x 8/38'W x 11-1/4'H Type: Y-Axis Reversible ... morewith 1.5 second time delay Variable speed Rapid traverse speed: 40"Min Feed range: 0-10"Min 115V/60Hz/ 1 Phase power supply Torque: 150LBS Quantity: 1 Set Shipping FREE SHIPPING in lower 48 States. Additional charge applies to APO. AK, HI, GU, PR, and VI addresses. Please contact seller for additional information. All items will be shipped Ground Service. Payments Paypal payment only please. Buyer can use MasterCard. Visa, Discover and American Express through Paypal. It is Safe, Fast& Reliable. In all cases payment is expected within 7 days of sale date. Contact Info We are here to help. If you have any questions or concerns regarding your purchase, please feel free to contact us at any time using the eBay messaging system. Please allow 24 to 48 hours to receive a response. We will do our best to answer all your questions as soon as we can. Policy All purchases come with a 14-days money back guaranteed. SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all postage fees on return. All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused.
$
3,950
Buy It Now
Free Shipping
Condition: Used
Location: Orange,CA,USA
$
25.99
Buy It Now
$0 Shipping
Condition: New
Location: Broadview Heights,OH,USA
$
4,500
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Bridgeport,CT,USA
THIS IS A NICE HEAD 2 HP 3 PHASE CAME OF A BRIDGEPORT MILL THE PRICE IS ABOUT THE THIRD OF A NEW HEAD FROM BRIDGEPORT HARDINGE R8 SPINDLE WE HAVE TOMASNY ... moreBRIDGEPORTS INSTOCK WE ARE SELLING THE GOOD HEADS CALL FOR A SHIPPING PRICE
$
17.99
Buy It Now
$0 Shipping
Condition: New
Location: Broadview Heights,OH,USA
$
2,500
Buy It Now
$500 Shipping
Condition: Used
Location: Rochester,NY,USA
$
119.97
Buy It Now
$0 Shipping
Condition: New
Location: Perth Amboy,NJ,USA
$
4,950
Buy It Now
Free Shipping
Condition: Used
Location: Portland,CT,USA
$
13.82
Buy It Now
$4.25 Shipping
Condition: New
Location: Largo,FL,USA
$
14.99
Buy It Now
$0 Shipping
Condition: New
Location: Broadview Heights,OH,USA
$
7,900
Buy It Now
Free Shipping
Condition: Used
Location: Portland,CT,USA
$
6,500
Buy It Now
Free Shipping
Condition: Used
Location: Bridgeport,CT,USA
11" x 58" Bridgeport Model Series II Vertical Milling Machine. S/N 1299 Mill Clean Series II Bridgeport Milling Machine with Power Feed Quill. ... moreRuns Great! Manufacturer: Bridgeport Model: Series II S/N: 1299 Specifications: Table Size 11" x 58" Longitudinal Table Travel 30" Cross Saddle Travel 15" Vertical Knee Travel 16" Spindle Speeds(Variable) 50- 3.500 RPM Spindle Nose#40 Spindle Quill Travel 5" Spindle Quill Feeds(Variable) 0.6- 2.5 IPM Ram Travel 16" Throat Distance 10 1/2" 26 1/2" Max. Work Piece Weight 500 Lbs. Machine Weight 5.250 Lbs. Equipped With: Power Draw Bar 3 Axis Power Feeds With Rapid Traverse Chrome Ways Auto Lube System Horsepower: 4 Machine is sold as is as shown Will Load FREE of charge. Buyer is responsible for freight or pickup. Contact Adam at 219-951-0219 or by emailing this posting.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13def12fd18-0xfb-
$
6,900
Buy It Now
Free Shipping
Condition: Used
Location: Watertown,CT,USA
$
350
Buy It Now
$0 Shipping
Condition: For parts or not working
Location: Saint Clair Shores,MI,USA
$
32.95
Buy It Now
$0 Shipping
Condition: New
Location: Durham,NC,USA
$
61.85
Buy It Now
$0 Shipping
Condition: For parts or not working
Location: Rowland Heights,CA,USA
$
6,950
Buy It Now
Free Shipping
Condition: Used
Location: USA
$
7,500
Buy It Now
$0 Shipping
Condition: Used
Location: Cuba,KS,USA
1999 EMILL CNC Acer square ways. Acurite reader. Still under power. Mostly small part fabrication. Have three running out of room in small shop. Pick ... moreup only, roll back or tilt trailer with winch needed as I do not have equipment available to load. Power draw bar power Z. Vise, colletts and mister to be extra cost if needed. Buyer to schedule pick up or delivery. Seller will help with loading, seller will place Item on pallet if given enough time to do so.
$
8.5
Buy It Now
$0 Shipping
Condition: New
Location: Largo,FL,USA
BRIDGEPORT MILL PART. MILLING MACHINE DIAL HOLDER W/LOCK NUT, this is for one holder and one nut)
$
26.99
Buy It Now
$0 Shipping
Condition: New
Location: Broadview Heights,OH,USA
$
38.95
Buy It Now
$8.95 Shipping
Condition: New
Location: Ontario,CA,USA
$
4,500
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Plainville,CT,USA
$
112,500
Buy It Now
$0 Shipping
Condition: Used
Location: Bridgeport,CT,USA
$
29.9
Buy It Now
$0 Shipping
Condition: New
Location: Auburn,WA,USA
$
28,950
Buy It Now
$0 Shipping
Condition: Used
Location: Bridgeport,CT,USA
$
16,500
Buy It Now
Free Shipping
Condition: Used
Location: USA
$
36.95
Buy It Now
$0 Shipping
Condition: New
Location: Durham,NC,USA
A Guide to Renovating the Bridgeport"2J" Variable Speed Milling Machine Publihsed in the USA by ILION Industrial Services. LLC Just in time ... morefor your winter project. ILION Industrial Services is pleased to announce this brand new edition of our popular Bridgeport renovation manual which is written specifically for variable speed models. If you are planning on refurbishing your existing Bridgeport Series 1"2J" or"2J2" Mill(With Variable Speed Head) or if you are out in the market looking for a good used Bridgeport, then this manual is a great place to start. A Guide to Renovating the Bridgeport 2J Variable Speed Milling Machine" our 152 page soft cover shop manual, is fully illustrated with over 400 B&W photographs and diagrams, plus step-by-step instructions for disassembling, cleaning, reassembling and adjusting all of the critical components of the variable speed 2J head milling machine. Bridgeport never produced a full blown maintenance manual for their mills so this is the closest you will come to a step-by-step guide. Please take a look at the sample pages in the photos above for an example of what to expect. The photos can be enlarged by clicking the button beneath the photos. The typeface of the manual is printed two points larger than normal for those of us who prefer to work at the bench without the use of our reading glasses. The instructions are simple and easy to follow. no prior machinery renovation experience is required. Though the Bridgeport is an industrial machine, it is well suited for the home garage shop or small business and the task of finding one, getting it home and getting it back into operating condition is not as expensive and daunting as you may think. Let us show you how. If you are interested in the Bridgeport J Head(The Step Pulley Model) please check out our other listings for that book. Hundreds of the J Head Bridgeport manual have been sold to date so please check out the feedback from our customers to see what everyone else is saying about
$
1,950
Buy It Now
Free Shipping
Condition: Used
Location: Holland,OH,USA
$
24,500
Buy It Now
$0 Shipping
Condition: Used
Location: Aurora,IL,USA
$
25
Buy It Now
$14 Shipping
Condition: New
Location: Fullerton,CA,USA
1 2 3 4 5 6 7 8 9 10 11 12 13
 In 

Past Items  
 
Bridgeport Milling Machine 13 Piece R-8 Collet Holder and Tool Tray Jet Enco Fits most any mill with roughly same casting as Bridgeport. With 2 bolts. 14" wide by 9" deep. Has spot on back where someone tried out a shallow cut. This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with USPS Priority Mail. We care enough to take multiple pictures of our items for sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. cmb_gsrx_vers_524(GS 6.6.4(524)
BRIDGEPORT Series II Milling Machine S/N 2988 2HP Series II Table Size 11 X 58 inch Series I 2HP Head Voltage 230/460 Volts Auto Lube APPROX. WEIGHT. 4.700 LBS Please Note: Shaping Head and Rotary table in pictures ARE NOT INCLUDED IN THIS SALE(Inv.18554) Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method ... moreof payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Powered by
This is a used crank knee handle for a milling machine. I'm not sure what milling machine it fits. But the size/details are shown in the pictures. Good condition and looks like good quality. Please see pictures to see exactly what is included. Don't miss this! FREE PRIORITY MAIL SHIPPING INCLUDED! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) ... moredepending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
ebay template 9" x 42" Manual Turret Milling Machine I TEM S OLD A S P ICTURED Bridgeport's 9"x42" Model BRJ is a heavy-medium duty machine equipped with a model"J" milling. Drilling, and boring head as standard equipment. The capacity of the machine includes right angle milling, drilling, and boring as well as vertical. Angles in all planes are set through worm gear controls. Ram type construction permits movement of head over the table without rechecking the squareness of the spindle. In and out movement of the ram, through rack and pinion, is effortless. The rear end of the ram has a regular swivel adapter for mounting additional heads, giving angular settings in both vertical and horizontal planes. Bridgeport released this milling machine in 1966 and as with many Bridgeport. Has withstood the test of ... moretime and is in very good condition with minor signs of wear from age and previous use. Works great. Please call if you'd like further details or information. Ask for Jerad(818) 718-6734 FEATURES One Shot Lube System 1HP Spindle Motor R8 Collet Rack INCLUDES(nine) R8 Collets SPECIFICATIONS Table Size 9" x 42" Longitudinal Travel- manual 30" Cross Travel 9" Vertical Travel of Knee 16" Quill Travel 5" Spindle Taper R-8 Collet Capacity ¾" Speeds 80- 2720 rpm Overall Height 78" Overall Depth 58¾" Overall Width 75½" Specifications subject to verification INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the bes
KURT POWER BAR WAS ON A MILLING MACHINE I BOUGHT I HAVE NO NEED FOR IT I BELIEVE IT TO BE COMPLETE NOT USED MUCH IF ANY AT ALL. IT DOES NOT LOOK BROKEN OR ABUSED SELLING FOR PARTS THESE UNITS ARE ABOUT A THOUSAND DOLLARS NEW. ASK QUESTIONS.
This a used slitting saw adapter with end support. A small angle head and a grinder adapter for a bridgeport style mill. I'm not sure hoe the angle head works, it came along with the slitting saw arbor. The buyer to pay actual shipping from 13421 zip code. Thanks for looking. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-14003dc6b13-0xf6-
Up for sale is a Nice Albracht key less chuck with R8 shank1/32" to 1/2" 1-13. Looks like very light use and storage marks. From estate of a machinist nice craftsmanship check out my other items for more great machinist and gunsmith items Buyer pays actual shipping no hidden cost here Thanks for looking May God Bless!
Up for sale is a Nice cushman with key drill chuck with R8 shank 0" to 1/2" 0-13. Looks like very light use and storage marks. From estate of a machinist nice craftsmanship check out my other items for more great machinist and gunsmith items Buyer pays actual shipping no hidden cost here Thanks for looking May God Bless!
This is a gently used quill stop screw.
CREDIT CARD PAYMENT OVER THE PHONE OR PAYMENT IN PERSON AT TIME OF PICK UP ARE THE ONLY FORMS OF PAYMENT ACCEPTED ON THIS ITEM. THAT IS OUR POLICY ON ITEMS OVER $500 Selling a nice Bridgeport head from a milling machine. It is a J head. Equipped with the#30 taper quick release spindle. Variable speed 2 hp. Power down feed quill. High and low range head speed. Currently wired for 230 volt but can easily be switched to 460. Head runs smooth and and is ready to be put back to work. We have 3 of these available. WE HAVE A FORKLIFT HERE TO LOAD IT ONTO A TRUCK OR TAILER FREE OF CHARGE. MACHINE WEIGHS APPROXIMATELY 250 LBS FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. PLEASE EMAIL OR CALL US FOR A SHIPPING QUOTE. SHIPPING TO A COMMERCIAL LOCATION IN THE CONTINENTAL US SHOULD BE BETWEEN ... more100-200 DOLLARS. BUT YOU MUST CONTACT US FOR AN EXACT PRICE. LOCAL PICK UP IS MORE THAN WELCOME, BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. CREDIT CARD IS THE ONLY METHOD OF PAYMENT. WE CAN TAKE A CREDIT CARD OVER THE PHONE. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
You are bidding on a USED Machine Shop Item: 8" Turntable(Bridgeport Type) Made in Japan Machine shop Milling Tool CONDITION: USED_ Purchased at Auction- Selling AS IS We will be listing a lot of items that came out of a retired machine shop. Click here to check our 2000 listed items other items! We list more items everyday! Reference& Location# A111 JL72313 Most items ship in one or two business days after being paid. Please Read Before Bidding My Buying& Selling Terms Payments I accept Paypal. Please pay ASAP. If you have reasons for a delay let me know. FREE SHIPPING We ship the same business day. If payment is made early. FREE SHIPPING to the domestic USA only. Resolution of Problems If there are any problems with this sale please contact me via email first and I will solve the problem. I take pride in customer satisfaction.
For sale here is an ORIGINAL 1966 Operators Manual for the Bridgeport Turret Miller with Model"J" Milling attachment. The covers are heavily soiled. But the interior pages are pristine and would make great copies. 33 pages. Please note: This item is final sale only. So please make sure it is what you desire before purchasing.
Item Information Item Name: Bridgeport J-Head Vertical Milling Machine- 1 HP Item# 10618 Price/Each: $4.000.00 Year: 1966 Brand Name: Bridgeport Model: J-Head Serial# BR94009 Asset Tag: 4984 Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Item Description BRIDGEPORT J-HEAD VERTICAL MILLING MACHINE S/N: BR94009 YEAR: 1966 W/ SERVO POWER FEED Contact Us About This Machine Should you have questions. Please contact Tim Staino at(860) 484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. We accept ACH or Wire payments. Credit card payments are to be ... moremade through PayPal and will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible for all scheduling, paperwork, claims and any or all damages incurre
I inherited some machining tools and they are of no use to me. These are various bits for. Milling machine. Tapered shank. They are all different sizes, most of them are 1/2" 5/8" and 3/4" If you have any questions feel free to send me a message. Posted with
aims NICE! CUSTOM DRILLING PRESS w/ BRIDGEPORT M-STYLE VERTICAL MILLING MACHINE HEAD read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Bridgeport Machines Inc. of Bridgeport. Connecticut. This is a Custom Drilling Press w/ M-Style Vertical Milling Machine Head in good working condition Model# M Serial# M22444 Specifications: Head: Spindle Diameter: 1-3/8" Quill Diameter: 2-1/2" Quill Travel: 3-1/2" Spindle Taper: 2 MT Tilt: 90- 0- 90 degrees Number of Speeds: 6 Spindle Speeds: 275- 425- 700- 1.050- 2,100- 4,250 rpm. Press: Throat: 9-1/2" Swing: 19 Table Size: 24" x 24" Table Height: 32" Column: 1-3/4" diameter x 33" high. General: Motor: 1/2 Horsepower. 208-220/440 Volt, 1,000/1,200 rpm, 50/60 Hz, Three Phase Electrical: ... more208-220/440 Volt. Three Phase Overall Dimensions: 40" x 29" x 70" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! CUSTOM DRILLING PRESS w/ BRIDGEPORT M-STYLE VERTICAL MILLING MACHINE HEAD NICE! CUSTOM DRILLING PRESS w/ BRIDGEPORT M-STYLE VERTICAL MILLING MACHINE HEAD NICE! CUSTOM DRILLING PRESS w/ BRIDGEPORT M-STYLE VERTICAL MILLING MACHINE HEAD NICE! CUSTOM DRILLING PRESS w/ BRIDGEPORT M-STYLE VERTICAL MILLING MACHINE HEAD NICE! CUSTOM DRILLING PRESS w/ BRIDGEPORT M-STYLE VERTICAL MILLING MACHINE HEAD NICE! CUSTOM DRILLING PRESS w/ BRIDGEPORT M-STYLE VERTICAL MILLING MACHINE HEAD NICE! CUSTOM DRILLING PRESS w/ BRIDGEPORT M-STYLE VERTICAL MILLING MACHINE HEAD NICE! CUSTOM DRILLING PRESS w/ BRIDGEPORT M-STYLE VERTICAL MILLING MACHINE HEAD NICE! CUSTOM DRILLING PRESS w/ BRIDGEPORT M-STYLE VERTICAL MILLING MACHINE HEAD NICE! CUSTOM DRILLING PRESS w/ BRIDGEPORT
DESCRIPTION Bridgeport Vertical Knee Milling Machine S/N: 198866 Year: 1979 Product Condition: USED- Clean. Very Good Condition. Specifications: Year: 1979 Table Size: 9" x 42" Power Feeds Low Speed: 5-500 RPM High Speed: 500-4200 RPM Includes: Vice. Local Pickups Local pickup is available for all items Monday thru Friday 8:30am- 4:30pm Domestic Shipments Domestic shipments are sent via UPS or USPS Priority Service. We choose the fastest most economic shipping method based on a items size. Weight, and value ratio. Items sent to Alaska& Hawaii are subject to additional charges. International Shipments We ship to all international countries. International shipments are sent USPS International Priority unless otherwise requested. Contact us for international shipping quotes. Freight Shipments Items requiring freight will be securely ... morestrapped to a pallet and loaded at no additional charge. Carriers assess an extra charge if delivery is made to residential area and/or if the service of a lift gate are required. Rigging charges may apply to items requiring special loading/shipping requirements. Your satisfaction is our highest priority! We offer a 14 day money back guarantee on all items with the exceptions of items we list as"As-Is" or"As Shown" condition. Many times we have no prior knowledge of use and/or the ability to test an items working condition. So please ask questions before bidding/buying. Contact us at 248-240-2841 or contact@ballardintl.com with any questions. Concerns, or issues you may have.
You are looking at a Table Elevation Crank Handle. I am not sure what milling machine it is from. So check the dimensions in the photos. If you have any questions on the dimensions, let me know and I will measure it. It is in good, used condition. No cracks. I made 11 photos(click on the photos to enlarge) Please view the photos below carefully. To see the condition of what is being sold. PLEASE CHECK OUT MY OTHER AUCTIONS. WHERE I AM SELLING OTHER MACHINIST STUFF: My other items Please scroll down to bottom of the listing. There might be answers to questions I get asked about this item. Combined shipping is available; every next item you buy is half price shipping. If shipping all together will be even cheaper. Then I will return the difference to your account. Buyer will pay the reasonable price. Local pick up is also available. Thank you ... morefor looking.
Bridgeport Model No. 9243-4 Milling Machine 220V This unit contains a lot of True-Trace add-ons: True-Trace Synchro-Trace Model 4001-09 True-Trace Transmission Drive. Model 4030-02 True-Trace Control Kit. Model 2071-01 True-Trace Tracer Valve. Model 1053-01 True-Trace Hydraulic Cylinder. Model 6050-04 True-Trace Hydraulic Power Supply. Model 5016-11 True-Trace Pivot-Type Tracer Attachment. Mark 2A True-Trace Hydraulic Tracing Valve. Model 1066-5 True-Trace Oil Cooler. not shown) This unit worked when taken out of service. Some time ago and is now being sold to make floor space for new machinery. Here is video of a similar system(only with multiple heads attached) so you can see how it all works: This will have to be shipped freight and shipping is not included. This is a NO RESERVE auction. Good Luck!
Hello. Up For Auction Today We Have. SHARP HMV LMV& LCS Milling Machine Operation Manual. 49 Pages. Good Used Condition. See Pic. I Will Be Selling A Large Collection Of Shop Tool Catalogs.Manuals And Literature For Machine Shop Tools In The Following Weeks Ahead. Shipping Is USPS.$2.00 All Auction Rules Apply. Thank You.
Bridgeport milling Machine with MX2 Cnc Control Table 9 X 42 Well yes this does have a smaller table sorry nothing I can do about that. However look at the ways on this machine They do look nice. Below is a movie of the machine moving and running. This machine has power feed on the knee for a quick lift. We ran it through some check and it seems to run good. Thank you for your Business! We can ship for you. God Bless!
Up for auction is a Bridgeport Milling Machine. Has 9" X 42" Table. J-Head, Dovetailed Ram, 1-1/2 HP 3 phase motor and includes a swivel vise. Machine is in good condition. Table is clean and only has a few small marks, ways are clean& smooth, screws are tight with only minor backlash. Looks to be the original paint which is in good condition. I will strap the machine to a pallet and load it on a truck at no charge, but all freight costs and arrangements are the buyer's responsibility. I will sell and ship to the lower 48 States only. I accept Paypal. Or COD if you pick the machine up. Feel free to e-mail with any questions. Thanks for looking and good luck bidding!
UNIVERSAL ENGINEERING#200 KWIK SWITCH SPINDLE UNIVERSAL#80296 FOR SERIES II BRIDGEPORT MILLS. BOTH 1HP& 1-1/2 HP WITH#200 KWIK CHANGE MASTER ASSEMBLED WITH ALL 3 BEARINGS AND BEARING SPACERS SPINDLE WAS REMOVED FROM A BRIDGEPORT TO INSTALL R8 SPINDLE VERY NICE CONDITION BUYER PAYS UPS COSTS 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-1402baf1cc6-0xf3-
Item for sale is(1) Vise Handle with a 3/4" Hex Drive Socket. This is a typical Kurt Vise style handle. Rather common on Bridgeport style milling machines. Used. But in excellent condition. Shipped FREE in the USA. Check out my! Be sure to add me to your!
BRIDGEPORT MILLING MACHINE 12" ROTARY TABLE*VGC* 12 BRIDGEPORT ROTARY TABLE IN VERY GOOD CONDITION FEW DRILL MARKS AS SHOWN. SHIPS FREIGHT $50.00 CRATE CHARGE IN ADDITION TO SHIPPING CHARGES. QUESTIONS OR FREIGHT QUOTES CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Freight- Check item description or contact seller for details. Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
BRIDGEPORT#2 BORING HEAD WITH R8 SHANK 5/8" TOOL BORES INCLUDES(6) 5/8" SHANK BORING TOOLS. SET OF(10) 1/2" SHANK BORING TOOLS AND METAL STORAGE CASE EXCELLENT CONDITION $12.50 S&H
You are bidding on a used manual for Bridgeport Series1(One) Milling Machine OP. Maint& Parts Manual w/ Views- Manual# M-105A. 33 pages Free Shipping to USA These manuals come from machine repair facilities that have closed or sometimes they are from a life time collection of a machine shop owner. Many of these manuals include notes. Schematics and parts list that are very valuable. They can save you hours or even days of labor when you are troubleshooting or repairing a machine. Click here to see our other 1400 items! Our reference Number& Location is 899 Please Read Before Bidding My Buying& Selling Terms Payments I accept Paypal. Please pay ASAP. If you have reasons for a delay let me know. My Shipping Policy If the ad says free shipping. It’s for the lower 48 states only. All others will be charged accordingly by location. ... moreResolution of Problems If there are any problems with this sale contact me via email and I will solve the problem. I take pride in customer satisfaction. My Return Policy Ebay Store Description All Sales Are Final. Please ask questions first. If I don’t know the answer I will find more info for you. Even if the item ends while I’m finding the answer keep in contact because I will be relisting it for you. http:stores.ebay.com/Your-Surplus-Riches What you see in the picture is what you will receive. Unless additional parts are mentioned in the ad, assume there are none.
Head Just Rebuilt Table Just Rescraped New Digital Readout(DRO) and New Power Feed Unit on"X" Axis Bridgeports don't get any better than this one Late Model 2 HP Bridgeport Series l. Knee Type Vertical Milling Machine w/ 42" Table. It Has Hard Chrome Ways and Freshly Spotted Table, Professionally Applied Fresh Paint, A New DRO and a New Power Feed Unit on the"X" Axis, and a Bijur One Shot Lubrication System. The following machine tool is now available for your inspection(under power) and purchase at our warehouse in beautiful downtown Miamisburg. Ohio. An"Excellent" Just Rebuilt Bridgeport Series l. 2 HP, Vertical Knee Type Variable Speed Milling Machine w/ Hard Chrome Ways and Freshly Spotted Table, S/N 228161, New in 1987. It has Excellent Hard Chrome Dovetail Ways(Just Look at Those Photos) a New ... moreDRO, a New Power Feed Unit on the"X" axis. And a Bijur One Shot Lubrication System. It has an excellent table surface) The head of this Bridgeport has just been rebuilt. It is vibration free in the entire RPM range. Both in direct drive and back gear. Spindle speeds are infinately variable from 60 RPM to 4200 RPM. The spindle nose is R-8 taper. The table size is 9 X 42" Table Travel is 28" The Saddle Travel is 12" and the Power Quill Travel is 5" plus 16" of Knee Travel. Electrical requirement is 200V/220V/380V/415V/440V/3PH/60CYC. Presently operating on 220V. It weighs 2,350 You can see this very fine machine tool under power at our warehouse in beautiful downtown Miamisburg. Ohio by calling Andy or myself for inspection(see phone numbers below) This is a Bridgeport Series l. Vertical Knee Type Milling Machine built with quality in the USA. Overall. A"Great Operating. Great Looking" milling machine with a rebuilt head. Excellent hard chrome dovetail ways, freshly spotted table, great screws and nuts, new DRO and Power Feed, with everything working as it should. The appearance speaks for itself(see photo's) If you need an excellent
UP FOR AUCTION IS A QUILL STOP FOR BRIDGEPORT MILLING MACHINE. QUICK ADJUST SPLIT LOCK. THIS IS IN EXCELLENT CONDITION WILL DO MY BEST TO COMBINE SHIPPING, FEEL FREE TO EMAIL ME AT WITH ANY QUESTIONS.
Up for sale is a Nice Jacobs 6A Drill chuck 0" to 1/2" USA Made 1/2 inch straight shank is approx 2 inches long. Looks like very light use and storage marks. From estate of a machinist nice craftsmanship check out my other items for more great machinist and gunsmith items Buyer pays actual shipping no hidden cost here Thanks for looking May God Bless!
Bridgeport/SWI 3-Axis CNC Vertical Milling Machine Series I. 2-HP Bridgeport/ SWI 3-Axis CNC Vertical Milling Machine Ref.76A-176 Series I. 2-HP Serial No. 206110 2001 SWI TRAK A.G.E. 3. 3-Axis CNC Control Package. Bridgeport Mill Was Recently Reconditioned. Table Size: 9" x 42" X-Axis(Longitudinal) Table Travel: 30" Y-Axis(Saddle) Cross Travel: 12" Z-Axis(Quill) Vertical Travel: 5" Knee Vertical Adjustment: 16" Quill Travel: 5" Spindle Speeds. Variable: 80- 4200 RPM Spindle Nose Taper: R8 Overall Dimensions: 60" x 60" x 78" High Equipped With: SWI Trak A.G.E. 3-Axis CNC Control System Handwheels on All Axis for Manual Movement Floppy Disk Drive& RS-232 Port Bijur One Shot Lube Chrome Ways 2-HP Variable Speed Milling Head 220/440/3/60 Approximate Net Weight: 2.000 Lbs. All Items Subject ... moreto Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limit
Recently Reconditioned Bridgeport milling machine S.N. 12/BR-174735 220/440 3 phase MS-113 Pristine 42" table recently re-scraped knee ways 2 HP 2J head Dynamics Research 2 axis DRO Servo power table feed Bijur 1 shot lube system Bridgeport swivel vise work light draw bar operator chip guard index able quill handle Under Power For Your Inspection In Mass
Item Information Item Name: Bridgeport Series I Boss 1 CNC Milling Machine Item# 10243 Price/Each: $5.500.00 $2.900.00 Year: Brand Name: Bridgeport Model: Series I Serial# Asset Tag: 5881 Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Item Description BRIDGEPORT SERIES I CNC MILLING MACHINE 3 AXIS X-Y-Z BOSS 1 VARIABLE SPEED Contact Us About This Machine Should you have questions. Please contact Tim Staino at(860) 484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. We accept ACH or Wire payments. Credit card payments are to be made through ... morePayPal and will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible for all scheduling, paperwork, claims and any or all damages incurred in transit. Lo
Nice pre-owned set of X AND Y AXIS BALL SCREWS. THEY CAME OFF A 9 x 42 SERIES 1 BRIDGEPORT MILLING MACHINE THAT WAS USING PROTO TRAK CNC. NEED A REBUILD? NEED A REPAIR? NEED ADVISE? NEED A REBUILD? NEED A REPAIR? NEED ADVISE? NEED A MACHINE NOT LISTED PLEASE CALL: DAN’S MACHINE TOOL. INC. WITH ANY QUESTIONS…714) 666-1266 OVER 30 YRS OF REPAIR AND REBUILDING EXPERIENCE ON ALL METAL WORKING MACHINERY INCLUDING BUT NOT LIMITED TO ACRA. BRIDGEPORT, CINCINNATI, HARDINGE, LAGUN, LE BLOND, KENT. SCOTCHMAN DAN’S MACHINE TOOL. INC. SPECIALIZES IN REPAIR& REBUILD, NEW& USED TOOLING, SALES OF NEW AND PREOWNED MACHINES, MANY IN STOCK: MILLS, LATHES, GRINDERS, BANDSAWS, IRONWORKERS…ALL UNDER POWER 1260 N. SUNSHINE WAY ANAHEIM. CA 92806 NEW PHONE# 714) 666-1266 FAX 714) 666-1269 SHIPPING: PLEASE SEE ITEM FOR PRICING FREIGHT: ANY ITEM WEIGHING OVER ... more149lbs SOLD AS IS: No warranty and unable to test CRATING SERVICES: We offer crating services on all freight items. Pricing for crating is different for each item Please call for details WE WILL GLADLY LOAD ANY FREIGHT ITEM ON YOUR TRUCK OR FREIGHT CARRIER FOR FREE! SALES TAX: ALL CALIFORNIA BUYERS MUST PAY 8% SALES TAX NEED A MACHINE NOT LISTED PLEASE CALL: DAN’S MACHINE TOOL. INC. WITH ANY QUESTIONS…714) 666-1266 OVER 30 YRS OF REPAIR AND REBUILDING EXPERIENCE ON ALL METAL WORKING MACHINERY INCLUDING BUT NOT LIMITED TO ACRA. BRIDGEPORT, CINCINNATI, HARDINGE, LAGUN, LE BLOND, KENT. SCOTCHMAN DAN’S MACHINE TOOL. INC. SPECIALIZES IN REPAIR& REBUILD, NEW& USED TOOLING, SALES OF NEW AND PREOWNED MACHINES, MANY IN STOCK: MILLS, LATHES, GRINDERS, BANDSAWS, IRONWORKERS…ALL UNDER POWER 1260 N. SUNSHINE WAY ANAHEIM. CA 92806 NEW PHONE# 714) 666-1266 FAX 714) 666-1269 SHIPPING: PLEASE SEE ITEM FOR PRICING FREIGHT: ANY ITEM WEIGHING OVER 149lbs SOLD AS IS: No warranty and unable to test CRATING SERVICES: We offer crating services on all freight items. Pricing for crating is different for each item Please call for details WE WILL GLADLY LOAD ANY FREIGHT ITEM ON YOUR TRUCK OR FRE
You are Bidding on(1) Good Used. Original Bridgeport Stationary Motor Vari-Disk. Bridgeport Part# 2J532. Fits Bridgeport Series 1 Milling Machines. Recently Purchased a Newer Bridgeport. Selling Miscellaenous Parts and Accessories from Previously Owned Bridgeport Milling Machine Series 1 Turret Miller Model BR2J. Free USPS Priority Mail Shipping with in 1 Business Day. Overnite Shipping is available upon request. Overnite Shipping Costs will be applied to the final auction price.
Up for Sale! 1996 BRIDGEPORT 9" X 49" VARIABLE SPPED MILLING MACHINE 2 AXIS READOUT- OC107) Mill is in excellent working and cosmetic condition- Equipped with chrome. Ways, X original Bridgeport power feed and Y servo variable speed power feed. 2 axis X and Y ACU-RITE readout. Table is in excellent shape no holes or any dings on it. Ways are perfect. bolts crews are smooth. it is a really nice unit Specifications: RANGE Table travel(X-Axis) 36" 914 mm) Saddle Travel(Y-Axis) 12" 305 mm) Quill Travel: 5" 127 mm) Knee Travel(Z-Axis) 16" 406 mm) Ram Travel: 12" 305 mm) Throat Distance(Min. 18.75" 476 mm) Throat Distance(Max. 6.75" 171 mm) WORKTABLE Standard: 49 x 9" 1219 x 229 mm) T Slot center distance: 3@ 2.5" 64 mm) centers T-Slot Size: 0.625" 16 mm) Height Above Floor(Max. 47.25" ... more1200 mm) Weight of Workpiece(Max. 750 lb(340 kg) Spindle(2J Head) Power Rating 30 min. Duty Cycle: 3 hp(2.2 kW) Power Rating Continuous: 2 hp(1.5 kW) Tooling: R-8 Collets Drilling Capacity Power Quill Feed 3: 3/4" Dia. 19 mm) Manual Drilling Capacity: 3/4" 19 mm) Mild Steel Boring Range: 6" 152 mm) Mild Steel Spindle Diameter: 1.875 in(48 mm) Quill Diameter: 3.375" 86 mm) Speed Range High(Infinitely Variable) 500-4200 rpm Low: 60- 500 rpm Power Quill Feed: 0.0015"rev(0.038 mm) Manual Adjust: 0.003"rev(0.076 mm) 0.006"rev(0.152 mm) MACHINE SIZE Floor Space: 8.3 x 5.3 ft(2.53 x 1.6 m) Machine height: 7.04 ft(2.15 m) Mass of Machine: 1950 lb(885 kg) 2095 lb(950 kg) Shipping) Mill can be previewed at our facility in Gardena. California- call to set up a time- 714 658 5390 We can help with a freight quote. LTL, Full Trucks, Flat Bed and local delivery. All purchases less than 150 lbs will ship UPS. Fedex or USPS. CALL. TEXT OR EMAIL WITH QUESTIONS. 714)658-5390 FREE LOADING IN ALL PURCHASES SE HABLA ESPAÑOL Visit our eBay store www.orangecountymachinery.com/ ph 714 658 5390 g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%6
Bridgeport Series 1 Milling Machine Ram. Ram Adapter(Knuckle) Turret assembly! Has engraved graduations on knuckle and on turret. Step Pulley Heads or Variable Speed heads will mount up to this ram adapter(knuckle) Quill Housing Adjustable Gear not Included! Only items as pictured including parts between Ram& Turret assembly. Includes at least the following part numbers: RAM adapter# 2060129. RAM# 2060128, Turret# 2060143, Adapter Pivot Pin# 2061028, Vertical Adjusting Worm# 1062206. Vertical Adjusting Worm Shaft# 2060130, Adapter Locking Bolts# 1061180 Plus a few other part numbers included in the assembly! We have several other Bridgeport Parts#s available!
HERE WE HAVE AN ORIGINAL BRIDGEPORT TAILSTOCK FOR A 15 INCH BRIDGEPORT ROTARY TABLE IN GOOD WORKING CONDITION WITH ADJUSTABLE 9" CENTER HEIGHT. 7 X 5 X 9 WEIGHT 25 LBS. FOR SHIPPING QUOTES AND CREDIT CARDS CALL TINA AT 727-362-8318 I HAVE OVER 1000 ITEMS IN MY E BAY STORE. IF YOU CAN NOT FIND WHAT YOU WANT. JUST ASK. Visit store: G and G MACHINERY If you have any questions contact Gerry at 727-547-0616 OR WE WELCOME INSPECTIONS AND CUSTOMER PICK UPS WE ACCEPT ALL MAJOR CREDIT CARDS! BUYER I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping, and the item is ... moreshipped, YOU, the BUYER, are now responsible, along with the shipping service provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges, such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 46 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Buy with confidence! On Jul-31-13 at 21:23:54 PDT. Seller added the following information:
This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with FEDEX GROUND. AK HI to pay actual shipping. Sorry. No international shipping. Maybe to Canada, please email if interested. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. LZW This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with FEDEX GROUND. AK HI to pay actual shipping. Sorry. No international shipping. Maybe to Canada, please email if interested. We care enough to take multiple pictures of our items for sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual item ... morefor sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. LZW_gsrx_vers_486(GS 6.5.1(486)
Bridgeport Maintenance Manual Interact I MK2 Milling Machine with Heidenhain TNC 150B-151A or 155A We have many other Manuals. If there are any others that you need that we do not have listed yet. Please contact us to see if we have it in our inventory. Stock Number: 1158
Bridgeport Controls Circuit Board SN 714 For Vintage Milling Machine P/N 2928472 This Came in a lot of checked& reconditioned circuit boards. I have sold several no problems, I will guarentee(including shipping both ways) that it will not be DOA
Programming Arm You are bidding on one Bridgeport Series I Interact Milling Machine Programming Arm with Heidenhain TNC 145 installed. This unit was working when removed from the machine. Item is in good condition. The unit shows some signs of cosmetic wear(including scratches and scrapes) that will not affect the unit's function. There is some burn in on the screen(see pictures) Will include maintenance manual and operating and programming manual. Shipping: Shipping costs will depend on location. Please contact us for shipping costs prior to bidding. When requesting a shipping quote. Please include your zipcode and whether the unit will be delivered to a residence or a business with a truck high dock or forklift. Local pickup in Rochester. NY 14606 is free The buyer can set up freight themselves(a packaging fee of 50 dollars will be ... moreadded to the total) or we can provide a competitive quote to the buyer. Shipping weight 175 lbs. PLEASE NOTE: Due to the way freightquote.com words their Bills of Lading. We will no longer be allowing any shipments made through them. You can contact us for more details, but please be advised that we will not sign a freightquote.com BOL. We apologize for any inconvenience and we will do everything we can to assist in finding the best freight price we can. All others will be charged according to their location Sales tax of 8% will be charged to New York State residents and businesses. We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
SquareTrade © AP6.0 BRIDGEPORT KWIK CHANGE TOOL HOLDER FOR CNC MILLING MACHINE FOR COLLET TAPER 1" 1 3/4" OVERALL LENGTH 7 1/2" ERIKSON TOOL C_127104_1_66_5527 I HAVE OVER 1000 ITEMS IN MY E BAY STORE. IF YOU CAN NOT FIND WHAT YOU WANT. JUST ASK. Visit store: G and G MACHINERY If you have any questions contact Gerry at 727-547-0616. WE WELCOME INSPECTIONS AND CUSTOMER PICK UPS WE ACCEPT ALL MAJOR CREDIT CARDS! BUYER I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping, and the item is shipped, YOU, the BUYER, are now responsible, along with ... morethe shipping service provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges, such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 42 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Bid with confidence! On Oct-30-09 at 13:10:38 PDT. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
You are Bidding on(1) Digital Readout Mounting Bracket. Digital Readout mounts on this Bracket which then mounts onto the Swing Arm. Other than the Black Over Spray. This is in Very Good Used Condition. Swivels Freely. See Last Picture for Approx. Dimensions. I also have Listed. A Digital Readout Swing Arm that this Bracket will Fit. Recently Purchased a Newer Bridgeport. Selling Miscellaneous Parts and Accessories from Previously Owned Bridgeport Milling Machine Series 1 Turret Miller J Head Model BR2J. Shipping is Calculated on Actual Weight(5 1/4 lbs) of the bracket. Ships within 1 Business Day.
BRIDGEPORT MILLING MACHINE KNEE CRANK HANDLE USED ITEM MAY SHOW SIGNS OF USE INVENTORY#52127
BRIDGEPORT MILLING MACHINE TABLE HANDLE 5/8 ID SQUARE USED ITEM MAY SHOW SIGNS OF USE INVENTORY#52128
a used stop for positioning work in a vise on millers like a Bridgeport see pictures
USED SERVO POWER FEED OFF A BRIDGEPORT MILL(TYPE 70) THIS LOVELY SERVO POWER FEED CAME OFF A BRIDGEPORT MILL AND IS IN NEED OF A GOOD HOME! IT IS IN FAIR CONDITION( NOTE THE PICUTRES) AND WORKS ELECTRONICALLY BUT NEEDS BEARINGS AND/OR CLEANED. WHEN USING SOMETHING FEELS"WRONG" THIS WOULD MAKE AN EXCELLENT REBUILD OR WOULD BE GREAT UNIT FOR PARTS! SOLD AS IS! SHIPPING WEIGHT IS 12 LBS. THANKS FOR LOOKING AND GOOD LUCK BIDDING. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email for further information. Shipping and Handling Shipping weight: 12 LBS Buyer pays the shipping& handing charge. Terms and Conditions We guarantee the items are ... moreexactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items.
YOU ARE BIDDING ON FOUR TURRET BOLTS ABOUT 5 1/2 INCHES LONG FOR A BRIDGEPORT OR COPY MILLING MACHINE. SEE MY OTHER BRIDGEPORT PARTS 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-1405f583d5f-0xfe-
YOU ARE BIDDING ON A END PLATE AND BEARING FOR A BRIDGEPORT OR COPY MILLING MACHINE.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1405f583dce-0x103-
Bridgeport Milling Machine Boss 5- BSP-2 Circuit Board- 31936741- Known Good This BSP-2 circuit board is for a Bridgeport Boss 5 machine. It is known to be a good working board. Part Number: 3193-6741. 31936741 S/N: 276
YOU ARE BIDDING ON HANDLES FOR A BRIDGEPORT OR COPY MILLING MACHINE. SEE MY OTHER BRIDGEPORT PARTS
BRIDGEPORT MILLING MACHINE DIAL 0 TO.200 X.001 1 5/16 ID X 3 1/4 OD X 1" THICK USED ITEM MAY SHOW SIGNS OF USE INVENTORY#52170 Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~ 22 3/4" marked 2 came with bridgeport mill tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. As ... morealways. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
THIS AUCTION IS FOR A USED MILL PORT VERTICAL CNC KNEE MILL WITH ANILAM SERIES 1100 CONTROLS. $$$$ PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. $$$$ CNC CONTROLS DO NOT WORK! NO CPU! THE COMPANY THAT HAD THIS MILL SAID MOTHER BOARD WENT OUT! AND DECIDED NOT TO REPAIR! OTHERWISE MILL IS IN GOOD CONDITION AND CAN BE USED AS A MANUAL MACHINE OR A GOOD RETROFIT PROJECT! WE DID TEST MILL HEAD WHICH IT SOUNDS GOOD AND QUIET! $$$$$ PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. $$$$ MILLPORT BASE MILLING MACHINE. Table Size 10" X 50" Spindle Taper: R8 Spindle Speed: 60- 4200 RPM-Variable Speed Head 3 HP Motor 220/440 3 Phase. Wired 220 Volts Approx. Weight: 2800 LBS. PLEASE GIVE US A CALL AT 1-812-968-5230. FOR SHIPPING QUOTE PLEASE SEND A COMPLETE ADDRESS! IF ITEM IS BEING SHIPPED TO A BUSINESS OR RESIDENTIAL? ... moreWITH DOCK OR FORKLIFT? OR IF YOU WANT TO PICK UP AT FREIGHT TERMINAL. I WILL LOAD FOR FREE ON YOUR TRUCK OR TRAILER. PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. PLEASE EMAIL IF YOU HAVE ANY QUESTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
You are Bidding on(1) Original Bridgeport Nose Piece. Bridgeport Part# J172. Used Condition. Recently Purchased a Newer Bridgeport. Selling Miscellaneous Parts and Accessories from Previously Owned Bridgeport Milling Machine Series 1 Turret Miller J Head Model BR2J.
BRIDGEPORT MILL MILLING MACHINE 1.5 HP BR-213691 FOR PARTS OR REPAIR BRIDGEPORT MILL MILLING MACHINE 1.5 HP BR-213691 FOR PARTS OR REPAIR. 9x48 INCH TABLE. YOU CAN PICK IT UP OR WE CAN SHIP IT. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 ... more718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
For slitting/slotting saw blades. These have been re sharpened by the shop I got them from and to my knowledge not used after being sharpened.here are diameters and thicknesses as written on each by'them: 2.760. 2.743, 2.769, 2.742. They seem about 2 mm thick Saws like this sell for $30 and up each. I believe they are High speed steel because the markings are ground off and they don't feel heavy enough for solid carbide. I am moving on the 18th. If you want me to ship before I move you must pay for these right away after auction close. If not you will have to wait until we arrive. As long as I am paid onetime I guarantee I'll ship on time Posted with
Excellent working condition Bridgeport milling machine. You can test drive it in our shop in Fall River. MA. Variable Speed, readout and motorized table. Model 6-X005, 1.5HP, 9x42" Table.
Used Kurt Anglock Milling Machine Vise in good working condition. Made in USA. A couple marks here and there as every milling vise has but functions as it should. Jaws are 6" wide. VERY heavy. Over 70 lbs. Will ship in 2 boxes to save YOU on shipping and MY back. Last 2 pictures show what will come in each box. If you don't think you can assemble this vise please don't bid. What you see is what you get. Ask questions BEFORE bidding. Shipping to USA Address Only.
Gold International Machinery Corporation | Hartford 2 HP. Variable Speed Ram Type Vertical Turret Milling Machine, S/N: 791578 Our Inventory Number: 0338-470 Technical Specifications: 230V/3PH/60HZ, Motor: 2 HP, Built 1979, Table size: 9" x 42" Longitudinal table travel: 30" Cross travel: 12" Vertical travel of knee: 16" Vertical capacity: 0- 18" Throat size: 6-3/4" minimum to 18-3/4" maximum, Spindle: R8 taper, Drilling capacity: 3/4" manual/ 3/8" power feed, Quill travel: 5" Spindle speeds: 60- 4200 RPM(variable) Overall dimensions: 76"w) x 63"d) x 77.5" high, Estimated weight: 2130 lbs. Equipped With: Longitudinal power table feed, 6" Bridgeport milling vise with swivel base, This item is in very good condition! We can palletize. Cover and load this item for an ... moreadditional $175. We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment
HERE WE HAVE AN IMPORT FINE FEED HANDWHEEL. FOR A BRIDGEPORT OR BRIDGEPORT CLONE PRICE IS FOR 1.THERE ARE 2 AVAILABLE HOLE DIAMETER IS.506 OR 13 MM I HAVE OVER 1000 ITEMS IN MY E BAY STORE. IF YOU CAN NOT FIND WHAT YOU WANT. JUST ASK. Visit store: G and G MACHINERY If you have any questions contact Gerry at 727-547-0616 WE WELCOME INSPECTIONS AND CUSTOMER PICK UPS WE ACCEPT ALL MAJOR CREDIT CARDS! BUYER I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping, and the item is shipped, YOU, the BUYER, are now responsible, along with the shipping service provider for ... morethe item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges, such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 46 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Buy with confidence! On Jul-31-13 at 21:23:54 PDT. Seller added the following information:
SOTTOF SALES Good working condition. Comes as shown. Removed from a Bridgeport J Head Mill with a head serial number of J103110. D3764.3 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items ... morewill be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
SOTTOF SALES Comes with all parts shown so please look carefully at the photos. The end of the shaft on the feed reverse knob end is buggered up, may be repairable or not, the rest of the parts are in working condition. Removed from a Bridgeport J Head Mill with a head serial number of J103110. D3763.2 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit ... moreor payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
SOTTOF SALES Includes everything shown. Please look carefully at all the photos as this is what you will receive, parts are in good used condition. Removed from a Bridgeport J Head Mill with a head serial number of J103110. D3762.2 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) ... moreis/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
This auction is for the Bridgeport j-head milling machine as seen in the pictures(the cast iron table is in another listing) This Bridgeport was removed from power about a month ago and was sold because it was seldom used. It is a 3 phase machine and I currently do not have 3 phase power. Feel free to ask any questions you may have but keep in mind I am only a hobby machinist. Please look at the pictures carefully. This is a solid machine and it does have some table marks. It is about 60 years old. Back when they actually made something to last. I am located a little over an hour north of Nashville Tennessee. I can load for free. Please see my ebay store page for direct contact information. Thanks for looking and please see my other auctions. I have a heavy cast iron table that would go great with the milling machine. Posted with
GOOD CONDITION USED 4" SWIVEL BADE PRECISON MILLING MACHINE LOCKDOWN VISE! FITS BRIDGEPORT OR BRIDGEPORT TYPE MILLS LOOKING FOR A GOOD HOME! THANKS FOR LOOKING AND DON'T FORGET TO CHECK OUT OUR OTHER METALWORKING PRODUCTS AS WELL. PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email matacoinc@aol.com for further information. ... moreShipping and Handling Shipping weight: 40 lbs. Buyer pays the shipping& handing charge. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items.
BRIDGEPORT VERTICAL MILL GREAT CONDITION For most late-model machines the Model 2J2 was the"Standard" head offered for the Series 1. It had a 2 hp. 1.5 kW) motor driving an expanding and contracting pulley system. Incorporating a lathe-like"backgear" to give infinitely variable speeds from 50 to 3750 rpm. Like all Bridgeport heads the quill was hard-chrome plated. Ground and then lapped to fit the honed bore in the main casing. The handles of both the quick-action drilling(sensitive" and wheel operated fine-feed were detachable and three rates of power down(and up) feed provided. The spindle was fitted with a brake- to slow it rapidly from high speeds- that could also be positively locked to aid tool changes; a clutch. Designed to slip in overload conditions, protected the spindle from damage. As a point of interest ... more3 different lengths of drawbar were used on the 2J2 head: 19.5" 23.5" and 26.5" so, if the one with your newly-acquired machine doesn't fit, now you'll know you know FOR MORE INFO CALL 214-943-5583
GOOD CONDITION ORIGINAL BRIDGEPORT USED RIGHT ANGLE 90 DEGREE HEAD! FITS ALL MILLS WITH 3-3/8" DIAMETER SPIDLE AND WILL FIT R-8 TOOLING. WILL SHIP UPS. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email for further information. Shipping and Handling Shipping weight: 20lb. Buyer pays the shipping& handling charge. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and ... moremanage your active items.
USED BRIDGEPORT TYPE 8" ROTARY TABLE! GOOD CONDITION. NEEDS A GOOD HOME! THANKS FOR LOOKING AND DON'T FORGET THE OTHER QUALITY BRIDGEPORT PRODUCTS IN THE STORE. SUCH AS REPAIR KITS, REPLACEMENT PULLEYS, AND CLOCK SPRINGS. PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email for further information. Shipping and Handling ... moreWeight 55 lbs. Buyer pays shipping and handling. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items.
USED BRIDGEPORT MILLING MACHINE QUILL HOUSING! QUALITY USED PART. STILL VERY USABLE. OFFERING WHAT IS IN THE PICTURE. LOOKING FOR A GOOD HOME. THANKS FOR LOOKING! PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email matacoinc@aol.com for further information. Shipping and Handling Shipping weight: 58lbs. Buyer pays the shipping& ... morehandling charge. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items. c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-140a59fcaa6-0xf6-
9” x 48” Bridgeport Vertical Milling Machine Model 2J. S/N 154476 Machine Specs: Table Size- 9” x 48” Travels X- 30” Y 12” Quill 5” Knee 15” Spindle speeds- 60-4200 RPM Horse power- 1 ½ HP Spindle feeds- 003. 006, 0015 Weight- 2.000 lbs Equipped With: 1 ½ HP Milling Head Good Condition Inspect Under Power In Our Branchburg NJ Warehouse Questions Call Dave@ 908-399-8133
9” x 42” Bridgeport Vertical Milling Machine Model 2J. S/N 162249 Machine Specs: Table Size- 9” x 42” Travels X- 30” Y 12” Quill 5” Knee 15” Spindle speeds- 60-4200 RPM Horse power- 1 ½ HP Spindle feeds- 003. 006, 0015 Weight- 2.000 lbs Equipped With: 1 ½ HP Milling Head 1 Shot Lube Good Condition- Head Very Quiet Inspect Under Power In Our Branchburg NJ Warehouse Questions Call Dave@ 908-399-8133
BIJUR ONE SHOT LUBE PUMP FOR BRIDGEPORT SERIES I MILLING MACHINE YOU ARE BIDDING ON A BIJUR ONE SHOT LUBE PUMP FOR A BRIDGEPORT MILL This comes with a 14 day return privilege. Shipping can be UPS or it can be picked up locally in Shelton. CT. ID: 4-6-13-18
SOTTOF SALES The drawbar has been repaired but is functional(see last photo) The spindle and the R8 taper is in good shape. Collet alignment pin is present. Removed from a Bridgeport J Head Mill with a head serial number of J103110. D3770.9 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. ... moreIf the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
SOTTOF SALES Comes just as shown. Good used condition, check my other listings for more BP head parts. Removed from a Bridgeport J Head Mill with a head serial number of J103110. D3768.4 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the ... moreright to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
SOTTOF SALES Good working condition. Removed from a Bridgeport J Head Mill with a head serial number of J103110. D3766.2 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped ... morevia Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
aims 1995! BRIDGEPORT EZ-TRAK 2-AXIS CNC MILLING MACHINE- EZ-TRAK DX CONTROL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Bridgeport Machines Inc. of Bridgeport. Connecticut. This is a used EZ-TRAK 2-Axis CNC Milling Machine in GREAT condition. Model# EZ-TRAK Serial# BR268124E Date of Manufacture: 1995 Photos were taken on location. But machine will ship from our Irwindale, CA warehouse. Here is some information from Bridgeport: This is the EZ-TRAK CNC Milling Machine. Combine the Series I with an easy-to-use control. And you have the EZ TRAK CNC. With the EZ TRAK, operators can alternate between manual and automatic milling as their application demands. Its three-axis control has a fully adjustable, flat screen Monitor that prompts for all machining data and signals the operator ... morewhen an action is required. The control can store up to 1.000 operations. The EZ TRAK also features a powerful 2 HP spindle motor, large table travel, and automatic cutter compensation so you can use those reground milling cutters. Chrome-plated ways with covers and a centralized, one shot lubrication system ensure a long machine life. Features: Rigid. One-Piece Column and Base Integrally Cast with Added Ribs. Hard Chrome-Plated Quill. Proven resale value! High demand caused many used Series I standards to sell for more than their original purchase price. Versatile-totally interchangeable parts. You choice of a full line of high productivity accessories and heads. Full support. Bridgeport stands behind every machine with nationwide parts and service. And application engineering support. Patented flow-through air cooling on 2J head prolongs bearing life and prevents expansion caused by heat build-up. Secure tools from 1/8" to 3/4" in a R8 collet. A quick adjustment micrometer nut allows rapid adjustment of the quill for long moves and can also be adjusted for fine positioning of.001" Sturdy. Coreless cast table, heavily ribbed for strength. Precision ways on c
This machine was refurbished by us. Rossi Machinery Services Inc. not rebuilt, other than the head. 9"x42" Variable Speed 2 Hp Tri-onics DRO and Encoders Chromed ways The head has new bearings. Bushings and some more new parts, the existing parts that were still in good condition were re-used. Thing sounds and runs like a champ. If you have any questions at all. Call us: 419-281-4488.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-140d7cfa7ad-0xef-
BRIDGEPORT RIGHT ANGLE HEAD/ MILL ATTACHMENT Specifications: Collet Type: R8 Shank: R8 Spindle Bore Diameter: 3-3/8" Overall Dimensions: 4-3/4" x 4-3/8" x 8-1/4" tall Features: All Steel Body. Alignment flats on both sides. Grease zerk. Precision hardened and ground spiral bevel gears. I don't know how well this works. All I can say is that it seems in good condition. Bearings and gears feel smooth and free. USPS Priority Mail Ebay is my garage sale. I'm not a dealer. Just an old retired guy trying to make a few bucks to pay for my hobbies. Everything I sell is used, shoot 90% of the stuff I own I bought used so it's unlikely I'm selling something new. I really don't think I should have to say this but just in case somebody out there thinks they might be getting something brand new, here is my disclaimer. ... moreItems are sold"As-Is" unless otherwise stated. I try to give the best description I can and point out flaws I'm aware of, but a scratch or mar I don't even notice might drive you up the wall. Ask plenty of questions before you commit to buy. I stand behind what I sell and will gladly accept returns but. Unless I have stated otherwise, you have to pay the freight. If you have any questions about the description or condition of an item please ask them up front. Authorization must be obtained before item is returned. I make every attempt to ship promptly. Unless otherwise stated. Buyer is responsible for all shipping costs. Shipping costs are non-refundable. For shipping claims. Buyer will deal directly with carrier regarding any claims for damaged goods. I will provide any information necessary to assist in buyer's claim. International shipping costs are based on my calculating the costs. Making a trip to the PO, and filling out the customs forms. Paypal is preferred. I will accept cashiers checks. Company check, or personal checks but they must clear before I will ship. All items must be paid for within 4 days of auction end. Powered by The free listin
Bridgeport Vertical Milling Machine Model 2J Serial# 17197 Variable Speed Forward and Reverse Table Bed 9" X 36" 1 Phase 115/230 V Works Great Many Extra Included Pick Up Only West Hartford CT
2 Bridgeport 90 degree attachments. Both are in good working order. Being sold as is.
BRIDGEPORT VERTICAL MILLING MACHINE 1 HP MOTOR 9"x42" TABLE Click Images to Enlarge ​BRIDGEPORT VERTICAL MILLING MACHINE 1 HP MOTOR SPEED RANGE: 80- 2.720 RPM TABLE: 9" x 42" 45 DEGREE HEAD TILT 5" SPINDLE TRAVEL SPINDLE TAPER: R8 SADDLE TRAVEL: 10-1/4" TABLE TRAVEL: 29.5" KNEE TRAVEL: 13" 3 PHASE. VOLTAGE: 220 1.800 RPM SERIAL NO: 852485 OVERALL MEASUREMENTS: 59" x 56" x 79" TALL WEIGHT: 1.821 LBS LOADING FEE: $20 WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I ... morewill ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machiner
ebay template Series 1: 9" x 42" Two-Axis CNC Milling Machine with 3-Axis DRO& Knee Travel Powerfeed I TEM S OLD A S P ICTURED This is Bridgeport 2-Axis cnc milling machine equipped with a 2HP Series 1 milling. Drilling, and boring head as well as powerfeed on the knee travel and digital readout for manual quill feed. The capacity of the machine includes right angle milling, drilling, and boring as well as vertical. Ram type construction permits movement of head over the table without rechecking the squareness of the spindle. In and out movement of the ram, through rack and pinion, is effortless. Bridgeport released this milling machine in 1983 or later according to the serial number and as with many Bridgeport. Has withstood the test of time and is in very good working condition with minor signs of wear from age and previous ... moreuse. Please call if you'd like further details or information. Ask for Jerad(818) 718-6734 FEATURES Anilam 2-Axis CNC Control 3-Axis DRO 2HP Spindle Motor Powerfeed on Knee Travel, Kurt Automatic Power Draw Bar, Chrome Ways, 3.5" Floppy Drive One Shot Lube System SPECIFICATIONS Table Size 9" x 42" Longitudinal Table Travel. X-Axis 25" Cross Table Travel. Y-Axis 12" Quill Travel 5" Knee Travel. Z-Axis 16" Ram Travel 12" Throat Distance 6¾" to 18¾" Table to Spindle Nose. Min. 2½" Max. Weight of Workpiece 750 lbs. Spindle Motor 2 hp Spindle Taper R8 Speed Range 60 to 4200 rpm Floor Area 64" x 64" Height 83" Net Weight 2920 lbs. Power 220 Volt. 3 Phase*Specifications subject to verification INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item is s
Bridgeport Milling Machine optical reader heads& brackets for sale. Everything pictured was included with a mill I recently purchased. All parts in the pictures are included. Can take more detailed pictures of specific items if requested. Optical reader was already taken off of the mill. So I cannot verify if everything needed to put it back on a Bridgeport Milling Machine is there. Cannot verify if anything works and have no way of testing. Sold AS IS. Everything needs a serious cleaning. Sold For Parts or Not Working since I cannot test. Will ship UPS ground to 48 continental states ONLY. Paypal ONLY. Payment within 24 hours of auction closing. Thanks.
BRIDGEPORT R2E4 3 PHASE- CONTROL BOARD CAME FROM A WORKING MILL WHEN PULLED BUT- USA BIDS ONLY- EMAIL ME YOUR PH# THRU EBAY FOR ANY QUESTIONS YOU MAY HAVE- 5DAY LISTING- NO RETURNS- CHECK OUT THE OTHER BRIDGEPORT PARTS I HAVE ON EBAY CLICK ON THIS LINK MORE HIGH RES PICS OF THE BRIDGEPORT BOARDS I HAVE ON EBAY CLINK ON LINK BELOW
Used Alliant Knee Milling machine 9"X42" 1 1/2TCS. 1.5HP wired 220 volt 3 phase vee belt drive. Speeds 80 to 2760 rpms. Backlash is 1/8 turn Y and 1/8 turn X. Head is in good condition runs great. The ways look decent with some scrapings visible. The table has been milled into multiple times some have been filled. Includes Sony DRO and Servo 140 power feed both work good. It also has Bujur Mist cooler which has not been tested. Mill has one shot lube. Way cover, collet rack, and knee handle. Mill has some chipped paint. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Email me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction ... moremay be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with eBay Mobile Posted with eBay Mobile. Posted with
Bridgeport Spindle 30 taper Series 1 with bearings. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1411efaf2b9-0x103-
RISER BLOCK FOR BRIDGEPORT MILL 15" DIAMETER 7-1/2" OVERALL HEIGHT APPROX. 95 LBS. Good used condition as pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. Buyer pays actual shipping cost. Free local delivery! If you have any questions regarding this item we can be reached at 440-343-4419. Thanks for looking!
Machine vise for Bridgeport and CNC milling machines mill Machine vise for Bridgeport and CNC milling machines. I sold my milling machine years ago and it has been gathering dust since. I can not find the handle so it is being sold as-is without a handle. Will be shipped UPS but I do reserve the right to use USPS to other than the lower 48 states Payment is expected within 7 days from close of auction unless prior agreement is made. Please ask any questions in advance:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14129811233-0xfa-