|
Pneumatic Air Clay Digger Sullair MCD30A + 2 Chisels
The Sullair breakers have eliminated most high-wear parts. Fewer parts mean less wear. Less maintenance, and less downtime. Unlike conventional breakers. Sullair breakers have no multi-part tappet system. With fewer parts, wear is reduced and risk of air leak is minimized. With no tappet system, which requires three independent impacts, noise is also reduced. Non-Protrusive Housing A leakproof air cushion forms at the end of the piston stroke and stops the piston from direct impact when the tool is not breaking. The elimination of side rods. Nuts, and springs makes Sullair breakers sleeker and more comfortable to operate. With only two parts moving during operation. Normal oil carry-over from the compressor, combined with moisture in the air, will usually provide sufficient lubrication under normal operating conditions. Manual lubrication ... morebefore storage is sufficient. One moving impact part minimizes maintenance. Standardization of design permits a high degree of interchangeability of parts between Sullair models. The piston. Impacting directly on the steel shank rather than a tappet, reduces noise level of the breaker. Reduced kickback is less fatiguing to the operator. Durable double roll pin permits easy steel changing. The direct impact piston design. Non-corrosive distribution valve and one-piece housing dramatically reduce air consumption. You can operate more tools from a single compressor. Specs Model: MCD30A Weight: 33 3/4 Lbs. Length: 24" Bore& Stroke: 2 25/32" X 3 25/32" Impact Rate: 1850 BPM Air Consumption: 37 CFM Air Inlet: 3/8" NPT Chuck Size: 7/8" X 3 1/4" Hex{Link}
|
|
|
Chicago Pneumatic Clay Digger Breaker Hammer CP-111D +2
Completely Rebuilt Pneumatic Clay Digger/ Demo Hammer by Chicago Pneumatic + 2 bits Model: CP-111D Class 25-30 Lb BPM: 4900 CFM: 49 Capacity: 1" Hex X 4 1/4" Air Inlet: 1/2" NPT Air Pressure: 90 PSI This tool has been rebuilt to like new condition by a professional air tool mechanic. All of the parts inside have been replaced with new ones. Only the body is used but it has been reconditioned. It comes with a 30 day warranty. This tool will also come with 2 reconditioned bits. The bits are not shown in the pictures due to what is available at the time of purchase. If you prefer a certain type of bit. Just email me at the time of purchase and we will try to accomodate you with what is available at that time.
|
|
|
Pneumatic Clay Digger Demolition Hammer Ingersoll Rand IR-73 +2Bits
Visit My eBay Store: eairtool_1 You are bidding on a Completely Rebuilt Pneumatic Clay Digger/ Demo Hammer by Ingersoll Rand + 2 bits Model: IR-73 BPM: 4900 CFM: 49 Capacity: 3/4" Square X 2 3/4" Air Inlet: 1/2" NPT Air Pressure: 90 PSI This tool has been rebuilt to like new condition by a professional air tool mechanic. All of the parts inside have been replaced with new ones. Only the body is used but it has been reconditioned. It comes with a 30 day warranty. This tool will also come with 2 reconditioned bits. The bits are not shown in the pictures due to what is available at the time of purchase. If you prefer a certain type of bit. Just email me at the time of purchase and we will try to accomodate you with what is available at that time. Powered by Powered by The free listing tool. List your items fast and easy and manage ... moreyour active items.
|
|
|
Pneumatic Clay Digger Demo Hammer Ingersoll Rand IR-59
You are bidding on a Rebuilt Pneumatic Clay Digger by Ingersoll Rand + 2 Bits Model: IR-59 Class: 40 Lb. BPM: 1350 Capacity: 7/8" Hex X 3 1/4" Length: 23 1/2" Type: Latch This tool has been completely rebuilt by a professional air tool mechanic and is in excellent running order. This tool will come with 2 bits and has a 30 day warranty through us! Let us know if you will need any hose or fittings or would like additional bits to go with this tool.
|
|
|
Pneumatic Clay Digger Demolition Hammer Worthington W-14 + 2 Bits
Visit My eBay Store: eairtool_1 Clay Digger by Worthington + 2 Bits Model: W-14 Length: 20" BPM: 1500 CFM: 28 Capacity: 3/4" Square X 2 3/4" Recommended Air Hose: 1/2" Air Connection: 3/8" Pipe This tool will come with 2 reconditioned bits This tool has been tested and runs good! Visit My eBay Store: eairtool_1 Powered by Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
American Pneumatic Clay Spade Digger Tool
American Pneumatic Clay Spade Digger Tool. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ea8dcfee4-0x108-
|
|
|
Pneumatic Clay Digger Demo Hammer Ingersoll Rand IR-73
40 lb little jackhammer works great and has a 1 1/4 inch point tip Posted with
|
|
|
INGERSOLL RAND 75 T HANDLE CLAY DIGGER (clay spade/pneumatic digger)
Thanks for your interest in my item. USA made T Handle Clay Digger. Just rebuilt and in as new condition! This item will not be boxed for shipping. It will be labeled and wrapped in plastic shipping wrap only. Buy with confidence knowing your are purchasing from a seller with 100% feedback. Please click here to see my other listings for other duct pullers. Reamers, duct rodders, vacuum systems, pothole rigs, swivels and other HDD and aerial construction equipment, or contact me with questions or for additional info@ 714 694-5930. If you don't see what you're looking for please contact me as I only have a small percentage of my tooling currently listed on eBay. Worldwide shipping is available. But not included in my listed shipping price. Please contact me with your shipping address and I will provide a quote for shipping outside of ... morethe US 48. The fine print below. SELLER PAYMENT and SHIPPING POLICIES: Paypal payment is due within 2 days of the auction close. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Returned items subject to a restocking fee which is equal to 25% of the purchase price of the item. Minor errors or omissions do not invalidate the stated purchase terms. In the rare case of a major or gross mistake as determined by Seller's representative. We will typically go beyond the stated purchase terms. Buyer agrees not to leave negative feedback until they have contacted us in writing and provided us with an opportunity to resolve any issues. Buyer agrees that if we honor all the terms in this contract they will not leave neutral or negative feedback. DOMESTIC SHIPPING POLICY: Shipping for this item is via Ground-Economy; other shipping options available for a fee. Please contact us to confirm an option and cost. If paid by PayPal we will ONLY ship to the PayPal confirmed or approved address chosen at the time of payment. Please note that the shipping price listed with the auction is for the most eco
|
|
|
Pneumatic Clay Digger Demolition Hammer by Gardner Denver model 28A I 113
Pneumatic Clay Digger Demolition Hammer by Gardner Denver model 28A I 113 This unit was serviced according to the work order. Included is the jack hammer and one bit. The one shown in the pictures. We did test this tool and it works great. Please see pictures for a more accurate description, if you have any questions, please email me and I will get back to you ASAP. The tools we have listed are from an auction(out of business tool repair store) So most of these tools have been repaired or rebuilt. Some of the tools have been repainted and, in some cases, parts have been replaced. That said, regardless, we are selling/auctioning off all our tools as"used tools" So please bid accordingly, we will test all tools to make sure they are working before listing and again before shipping. If you have any questions, email us and we will get ... moreback to you.
|
|
|
MACDONALD CD-13 PNEUMATIC CLAY DIGGER CHIPPING JACK HAMMER W/ BIT FREE SHIPPING
YOU ARE BIDDING ON A USED MACDONALD CD-13 CLAY DIGGER CHIPPING JACK HAMMER WITH BIT. THE CLAY DIGGER IS FULLY FUNCTIONAL AND IN GOOD USABLE CONDITION. THIS ITEM WILL COME AS PICTURED. SHIPPING TO THE LOWER 48 STATES WILL BE FREE.
|
|
|
APT 125 American Pneumatic Tool Clay Digger 7/8" Hex
This is a Used APT 125 American Pneumatic Brand Clay Digger. 21# weight hits good and sounds good! 2120 BPM with a 2-3/4" stroke. 7/8" x 3 1/4" chuck size. The APT Model 125 Clay Digger can be used for digging clay. Shale, hard pan and frozen ground. The Model 125 is a lighter weight tool ideal for digging medium to lightly packed soil, for light demolition work as well as for tunneling around existing foundations. With its latch type retainer, lighter weight and short lenght, this tool is one of the best and easiest to handle Clay Diggers made today. FEATURES Flapper valve design allows dirt to pass through without stopping tool, Drop forged. D-style steel handle, Replaceable chuck and piston stem bushing, Latch type retainer, Deep. Case hardened forged alloy steel cylinder, Inside trigger for better control and safety, Please ... morecheck out my other equipment& Tools in my eBay store If you have any questions please call me 810-343-2781 Price listed for shipping is to the lower 48 states only. Please ask for a quote in other areas or for international.
|
|
|
Toyo Pneumatic Clay Digger Breaker Hammer CA7A
This is a smaller hammer looks to be complete with bit. I have no way to test it. Item as is local pickup available. I will try to answer any questions you might have thank you for looking. NR Posted with
|
|
|
AMERICAN PNEUMATIC TOOL CO CLAY DIGGER MODEL HAMMER APT - 125
AMERICAN PNEUMATIC TOOL CO CHIPPING HAMMER 454 Series Click Photos to Enlarge Click to Enlarge Click to Enlarge Description AMERICAN PNEUMATIC TOOL CO CHIPPING HAMMER 454 Series American Pneumatic Tool Company American Pneumatic Clay Digger. Model APT- 125 Works as it should. Thanks for looking! Inkfrog terapeak. I000000. Analyzing"Smart Counters" only at inkFrog inkFrog Analytics.
|
|
|
Pneumatic Air Clay Digger Gardner Denver 28 + 2 Bits
You are bidding on a rebuilt Pneumatic Air Clay Digger by Gardner Denver + 2 bits Model: 28 BPM:1480 CFM: 48 Capacity: 3/4" Square X 2 3/4" Air Inlet: 1/2" NPT Air Pressure: 90 PSI This tool has been tested and is in good working order. This Tool comes with 2 shovel or asphault bits. What ever is available at the time of purchase. They are approximately 5 1/2" wide. Powered by On Apr-26-14 at 07:23:34 PDT. Seller added the following information:
|
|
|
PNEUMATIC AIR CLAY DIGGER,DEMOLITION HAMMER, CHIPPING HAMMER
PNUEMATIC NO5 CLAY DIGGER IN GOOD WORKING CONDITION. SHIPS NEXT BUSINESS DAY THANKS FOR LOOKING
|
|
|
ingersoll Rand air Pneumatic Clay Digger Demolition jack Hammer 73l 2 spades IR
This is a great little digger that we bought to dig out in a basement and few other tight spaces. It worked great! The group include the Ingersoll Pneumatic unit itself and two spade bits. One is like new and the other is used but not used up by a long shot. This has sat in the shop for long enough and I am to old to be climbing under houses anymore. But if you need to dig in a small space and have the air power to run this there is no better way. I did not respray it to make it look newer then it is. This is what it is. If you choose to it would be super easy. Hook up your air hose and dig away. I will only ship with in the lower 48. If you want it shipped else where contact me before you bid.
|
|
|
INGERSOLL RAND PNEUMATIC CLAY DIGGER / DEMOLITION HAMMER - W/ SPOON BIT – YELLOW
UP FOR AUCTION IS THE ABOVE LISTED ITEM. SOME OF ITS INFORMATION IS LISTED BELOW: THE ITEM LISTED IS A PNEUMATIC CLAY DIGGER/ DEMOLITION HAMMER. THE PNEUMATIC CLAY DIGGER/ DEMOLITION HAMMER IS MADE BY INGERSOLL RAND. THE INGERSOLL RAND PNEUMATIC CLAY DIGGER/ DEMOLITION HAMMER IS YELLOW. THE INGERSOLL RAND PNEUMATIC CLAY DIGGER/ DEMOLITION HAMMER COMES WITH A SPOON BIT. THE INGERSOLL RAND PNEUMATIC CLAY DIGGER/ DEMOLITION HAMMER IS USED. BUT I HAVE NO IDEA IF IT WORKS PROPERLY OR AT ALL, I JUST DID NOT WANT TO BE MISLEADING. THE PLATE ON THE TOP OF IT READS: INGERSOLL RAND WIGAN WN2 4EZ U.K. SIZE 93 SERIAL NO. GO5K46816 MAX AIR PRESSURE 6.2 BAR I OWN A PAWN SHOP AND A CUSTOMER PAWNED THIS ITEM AND DID NOT REDEEM IT. Please Feel Free To Ask Questions. But Please Try Not To Wait Until The Last Day. Please Bid With Confidence. And Serious Bidders ... moreOnly Please. Payment Is Due Within Seven Days After Auction Ends Thanks For Looking. Good Luck To All, Now Stop Watching And START BIDDING. Please Check Out My Other Auctions. As I Have Other Items Up For Auction Shipping Will Be FREE For United States Postal Service First Class Mail
|
|
|
Ingersoll Rand Pneumatic Air Clay Earth Digger Jack Hammer
Ingersoll Rand Pneumatic Air Clay Earth Digger Jack Hammer*TAX INVOICE INCLUDED IN ALL PURCHASES* PLEASE READ* By participating in the sale or auction. You have read and agreed to ALL of our terms and conditions. For more information. Please click on the below links. Terms& Conditions Payment Packing& Handling National Postage International Postage Returns Warranty Feedback Sale includes 1 x Ingersoll Rand Pneumatic Air Clay Earth Digger Jack Hammer Condition Overall conditions is good. The images in the listing are of the actual item you will receive. We were unable to test the product due to not having the necessary environment or equipment so consider the sale AS IS. WHERE IS. There are cosmetic blemishes on the item as per the images. Additional photos are available upon requests. All offers(if available) are welcome! Please submit ... morethem through the Best/ Make Offer option* Don't forget to view our other items to take advantage of our combined postage option and further your savings! National Postage from Brisbane. Australia We do complete door-to-door service and all items are tracked for your protection Local pickup is available from South West Brisbane International Postage from Australia Please contact us for a quote Please be advised that we only send via Registered Post(Air) International(Australia Post) Express Post International(Australia Post) or TNT Express with tracking and signature on delivery Terms& Conditions Payment Packing& Handling National Postage International Postage Returns Warranty Feedback ACEH00424 RH_gsrx_vers_577(GS 6.7.5(577)
|
|
|
Chicago Pneumatic CP0111 CHIT 7/8" Hex D-Handle Clay Digger Trencher Pick Used
You are bidding on a Used Chicago Pneumatic CP0111 CHIT 7/8" Hex D-Handle Clay Digger Trencher Pick. The clay digger is fully functional and will come as pictured. Shipping to the lower 48 states will be free. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-1489095a844-0x10e-
|
|
|
AMERICAN PNEUMATIC TOOL CO CLAY DIGGER Jack Hammer Pavement Breaker
item purchased from a business liquidation auction. it is in working condition. item is as seen in pic
|
|
|
Ingersoll Rand IR-73 Pneumatic Clay Digger Demolition Jack Hammer Free Shipping
You are bidding on a Used Ingersoll Rand IR-73 Pneumatic Clay Digger Demolition Jack Hammer with Bit. The clay digger is fully functional and will come as pictured. Shipping to the lower 48 states will be free.
|
|
|
Toku TCD-30 Pneumatic Air Jack Hammer Clay Trench Digger Concrete Breaker TCD 30
Toku TCD-30 Pneumatic Air Jack Hammer Clay Trench Digger Concrete Breaker TCD 30*TAX INVOICE INCLUDED IN ALL PURCHASES* PLEASE READ* By participating in the sale or auction. You have read and agreed to ALL of our terms and conditions. For more information. Please click on the below links. Terms& Conditions Payment Packing& Handling National Postage International Postage Returns Warranty Feedback* All offers(if available) are welcome! Please submit them through the Best/ Make Offer option* Don't forget to view our other items to take advantage of our combined postage option and further your savings! Sale Includes 1 x Toku TCD-30 Pneumatic Air Jack Hammer Clay Trench Digger Concrete Breaker TCD 30 Condition Overall conditions is good. The unit has been tested and is in working order. There are cosmetic blemishes on the item but ... moreit doesn't affect it's performance. Additional photos are available upon request. Specifications For full specifications- National Postage from Brisbane. Australia* Please ignore the automated eBay Australia Post Postage Calculator* We do complete door-to-door service and all items are tracked for your protection Due to the nature of the item. Local pickup(Wacol, Brisbane) is much preferred. International Postage from Australia Please contact us for a quote Please be advised that we only send via Registered Post(Air) International(Australia Post) Express Post International(Australia Post) or TNT Express with tracking and signature on delivery Terms& Conditions Payment Packing& Handling National Postage International Postage Returns Warranty Feedback TCD-30-D RH_gsrx_vers_577(GS 6.7.5(577)
|
|
|
APT Pneumatic Air Demolition Hammer Clay Digger
APT Pneumatic Air Demolition Hammer Clay Digger APT Pneumatic Demolition Hammer Clay Digger This American Pneumatic Tool is used and in good shape. It is being sold as you see it. It shows some signs of ware from use. You will receive your invoice within 24 hours of the end of auction. This will include your total balance including applicable sales tax and fees. If you are uncertain how much is owed. Please wait to pay until you have received your invoice. California residents pay local sales tax of 7.5% We ask that you promptly pay for your item. Payment is due within five days of the end of auction. PayPal is our preferred method of payment& recommended for buyer protection. PayPal accounts must have a confirmed address(within the United States) Sorry. No international PayPal payments accepted. If paying with electronic check through ... morePayPal. Your item will ship when the payment clears. Items that are eligible for return will be accepted within 14 days of the end of auction. Partial and full refunds will be given through PayPal minus actual shipping costs. Please refer to the individual auction for details and contact us directly if you have any questions or concerns. Items will be shipped within 1 business day of recieving payment. For items less than 150lbs. Our primary method of shipment is through FedEx or USPS. Items over 150lbs will be shipped as Freight(Freight Collect) Buyer to pay actual shipping and handling costs. Please let us know if your address is residential or business. If you wish for your shipment to be insured. Please specify this at the time of the purchase. Otherwise shipping insurance will be purchased at sellers discretion. All items are packaged with care by professionals. If damage has occurred. It is the buyers responsibility to file a claim with carrier. We will do all we can to assist in this unlikely event, but please be reasonable. We only ship within the U.S. Please no international bidders. Local pickups are always welcome. And encouraged when possible. PLEASE READ THESE T
|
|
|
APT Model 260 M260 20lb Pneumatic Chipping Hammer Clay Digger Used Free Shipping
You are bidding on a Used APT Model 260 M260 20lb Pneumatic Chipping Hammer. The chipping hammer does show some wear but is fully functional. This item will come as pictured. Shipping to the lower 48 states will be free.
|
|
|
APT Model 118 30lb 7/8" Hex Shank Pneumatic Clay Digger Used Free Shipping
You are bidding on a Used APT Model 118 30lb 7/8" Hex Shank Pneumatic Clay Digger. The clay digger does show some wear but is fully functional. This item will come as pictured. Shipping to the lower 48 states will be free.
|
|
|
APT Model 118 31lb 7/8"-3 1/4 Hex Shank Pneumatic Clay Digger Used APT-118
Hi you are looking at a APT-118 Clay Digger was service 2 month ago and never use. It was painted red at the shop. If you have any questions or want to make an offer email me thank you. Shipping is usps slow with tracking. Some info on web. American Pneumatic Tools Inc The rugged APT Clay Diggers are used for digging clay. Shale, hard pan, and frozen ground. The Model 118 is most commonly used for clearing out dirt under existing foundations and for tunneling under existing structures. The Model 118 can be used for horizontal and for vertical work. Technical Specifications Chuck Size in 7/8 x 3-1/4 Bore in 1-3/4 Stroke in 3-3/8 Impact Rate bpm 1850 Air Consumption cfm 34-36 Weight lbs 31 Length in 22-1/2 Air Inlet NPT 3/8" Male Consumables Paving Breaker Tool
|
|
|
Chicago Pneumatic Clay Digger No 31 With 6 inch Spade
This pneumatic spade has a brass handle. I have tested it and it works. It weighs 13 pounds. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
American Pneumatic Tools M118 5201 7/8" X 3 1/4" Clay Digger
Used APT Clay Digger Model M118 5201 It works great and is powerful Uses 7/8" x 3 1/4" bits It weighs right at 30 lbs
|
|