|
Universal Eng 97374 Precision Boring Head 3/8" 3-Hole 7/8" straigh shank
You are bidding on a used Universal Eng 97374 Precision Boring Head The shank has been modified from it original taper to a 7/8" straight shank so I can use it on more than one machine It has 3 holes that take 3/8" diameter boring bar for difference size range. I don't remember what is the minimum hole bore size but it will bore a large hole with horizontal hole mounting in low speed. Thank you for looking!
|
|
|
PRECISION UNIVERSAL Tool Boring Head 3-3/8 Head
PRECISION UNIVERSAL TOOL BORING HEAD Spec's Mfg: Precision Universal Tool Serial# 24934 Head Dia: 3-3/8" Shaft: 3/4" This is Used& In Great Condition& Working Order Comes As Shown! If you have any questions please contact Jennifer Thank You for looking& Have a Great Day SHIPPING: P POST USPS OR LOCAL PICK~UP OR OTHER IF AGREED UPON Buyer pays shipping& insurance. And a $2.00 handling fee for this item& Insurance is included into shipping costs. To be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via USPS. Canada will pay actual shipping costs plus duty fees via UPS or can ship USPS. We can combine other auctions or store items to save on shipping as long as they fit in the same flat rate box thats being shipped at the time. You ... moremay ask for freight cost before buying tools. Shipment will be made in 1 day as your payment is received and you will be notified by email when shipped out to you OR LOCAL PICK ~UP IS AVAILABLE PAYMENT: We accept PayPal.com PAYMENT INSTRUCTIONS: All payments must be received within 5 business days of auction end. If there has been no contact/payment from the buyer within 7 days after the auction ends the item will be reported& relisted or paid& has not been picked up on a local pick up item will be reported& relisted unless there was an agreement made. RETURNS: I offer a 7 day RETRUN POLICY for this item from the time of delivery if it is stated incorrectly or damaged on arrivel or If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands Buyer is responsible for return shipping costs and insurance. All shipping and handling fees will not be returned in any case. After 7 days no refunds and returns will be made! Please contact us before leaving a Neutral/Negative feedback. Giving us a chance to resolve your problem. We will of course satisfy yo
|
|
|
ERICKSON PRECISION #50 TENTH SET BORING HEAD 5/8"-18 THREAD .0001" GRADS
Erickson#50 Tenth Set Precision Boring Head 5/8" 18 Thread.0001" Graduations 2-1/2" Diameter 1/2" Tool Capacity Good Condition. Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding! 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13e728e9cc4-0xfd-
|
|
|
Narex Precision Boring Head 30 Taper 5/8" holes
click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge You are viewing a Narex Boring Head. Diameter: 5/8” 3.15” length. 2.5” width. 30 Taper tool holder The unit is in VERY GOOD condition. View all pictures closely and bid with confidence. internal: BSA– 04-05-11L) SEND ME FURTHER QUESTIONS AND COMMENTS! Condition Legend: MINT/ NEW: Never used or appears never used. Excellent: Like new condition with very little wear Very Good: Few scratches or engravings. Good: Scratches or engravings. Small but noticeable. Fair: Substantial wear and scratches. But item is functional. WHAT TO EXPECT AFTER BIDDING AND WINNING: 1. Win your item! 2. Receive a total with shipping(UPS to the US) applicable taxes(5% GST only in Canada. 13% HST for Ontario and BC customers and the East coast) 3. complete payment(we accept paypal or ... morecredit card over the phone) 4. In just 5-7* days receive your item quickly with UPS to the US and Canada Post to Canada or a freight company INFO FOR SMALL ITEM SHIPPING ITEM WEIGHING 150lbs and LESS For items under 150lbs(30kg) I use UPS.com to the US and Canada Post to Canada. There are absolutely no issues with customs to the US. Canada Post is very fast within Canada(typically within 5 days) And UPS is equally as fast to the US usually taking around 5 business days. The cost listed below is shipping for the US using UPS. Canadian customers please email me to get a shipping cost for you which should be cheaper. I use an outside packager so after your payment is received, your item is sent another local business which packages and ships your goods. It may take up to 5 business days to get your item properly packaged and shipped. As soon as I receive your TRACKING#s I will email them to you and you can track using that number at or. Very rarely. Canada Post will LOSE or DAMAGE an item. I insure every shipment, but there is a process to getting the insurance money which can include direct contact and information from the receiver(which is you) I will definite
|
|
|
2 PRECISION UNIVERSAL TOOL BORING HEADS #4 MT
PRECISION UNIVERSAL TOOL BORING HEAD#4 Morse Taper Shank You get both heads They one works. But the second one is for parts Questions? Call Robert at 607-259-5615 37-C
|
|
|
MACHINIST TOOLS LATHE MILL **INFINITY PRECISION BORING HEADS** in original box
UP FOR AUCTION PRECISION MACHINIST TOOLS& PARTS· INFINITY PRECISION BORING HEADS· IN ORIGINAL WOOD BOX* PLEASE REFER TO ALL PICTURES TO SEE CONDITION* Very well maintained and cared for by a seasoned professional machinist. WE ARE NOT SURE IF THIS IS A COMPLETE SET. PLEASE REFER TO ALL PICTURES TO SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE* Being SOLD AS IS– Do not know much about machinist tools but will try to describe as best I can. I am in the learning process. So any feedback will be appreciated. No RETURNS. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ... moreALL EMAILS AS SOON AS POSSIBLE AND WILL TRY TO WORK WITH YOU AS BEST I CAN. SERIOUS INQUIRIES ONLY. Please wait until auction has ended and invoice has been received to confirm all costs to buyer.
|
|
|
2" R8 Adjustable Precision Boring Bar .001"
2" Head size. R8 shank, 1/2" tool capacity. Some surface discoloration on shank, see photos, surface is still smooth. Used very lightly, 0-50 graduation in.001" increments. Continental US shipping only.
|
|
|
Wohaulpter #5MT Precision Adjustable Boring Head Milling-Lathe
Wohaulpter#5MT Precision Boring Head Model 5XL S/N-UPA5-S6/3993 Kit is missing a few parts. Questions: Call Fritz 518-966-8320.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13ee4c2a309-0xf0-
|
|
|
CRITERION MODEL DBL-203 PRECISION BORING HEAD ON #4 MORSE TAPER SHANK LOT C2985
LOT# C2985 WE ARE OFFERING A CRITERION MODEL# DBL-203 PRECISION BORING HEAD. COMES WITH A#4 MORSE TAPER SHANK Here is a boring head that will be in constant demand in any shop. Note the wide base bearing surface that assures maximum rigidity even when the bar holder is in an offset position. This wide base design is a Criterion innovation that increases bearing surfaces by 50% over older models. SPECIFICATIONS Dial Movement: 0.001" per diameter divisions. Head Diameter: 3. Overall Head Length: 3-3/8" Boring Bar Hole Size: 3/4" Center Distance Between Holes: 1" Cross Hole Diameter: 3/4" Shank: 4 MORSE TAPER. YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
Precision Boring Head with Moore Taper
Precision Boring Head with Moore Taper with Moore Taper Holds up to 3/8" Diameter Tools Excellent Condition NU1-D6
|
|
|
Maxwell Co. Precision Boring Head with Moore Taper
Maxwell Co. Precision Boring Head with Moore Taper EZ Set No.30 with Moore Taper Holds up to 1/2" Diameter Tools Excellent Condition NU1-D6
|
|
|
Lincoln Machine Specialty Co. Precision Boring Head with Moore Taper
Lincoln Machine Specialty Co. Precision Boring Head with Moore Taper with Moore Taper Holds up to 1/2" Diameter Tools Excellent Condition NU1-D6 On Jun-13-13 at 01:51:08 PDT. Seller added the following information:
|
|
|
Precision Boring & Facing Head
Boring head is like new condition. No tooling missing. Case included. R8 shank included.
|
|
|
Valenite VPB S12-PC6-4 Precision Boring Head Bar Holder System Vernier .0001 Dia
Description Excellent used Valenite VPB S12-PC6-4 Precision Boaring Holder System Vernier=.0001 Dia. 1 Div=.001 Dia. VPB PC6-2015 Adjust Range.62 Dia. Check out my! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding Ships within the USA. Canada and Worldwide. Not sure that we ship to your area email ask the seller a question. Free shipping is only offered to the ... moreUSA. Our shipping carriers for packages are UPS ground and USPS Priority mail for packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or call to get your questions answered. International buyers you are responsible for your Custom. Tariff and Duty Fees upon arrival in your country. All S
|
|
|
LOT OF PRECISION ASSORTED BORING BARS 1" SHANKS
aims LOT OF PRECISION ASSORTED BORING BARS 1" SHANKS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Coast Cutters and other mnfs. This is a Lot of Precision Boring Bars in good condition. Specifications: Shanks: 1" Overall Length: 3" to 6" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF PRECISION ASSORTED BORING BARS 1" SHANKS Reliable Tool Inc. c 2011 | Powered by
|
|
|
LOT OF PRECISION CRITERION CARBIDE TIPPED BORING BARS 1" TO 1-3/8" SHANKS
aims LOT OF PRECISION CRITERION CARBIDE TIPPED BORING BARS 1" TO 1-3/8" SHANKS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Criterion. This is a Lot of Precision Boring Bars in good condition. Specifications: Shanks: 1" to 1-3/8" Overall Length: 3-1/2" to 4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF PRECISION CRITERION CARBIDE TIPPED BORING BARS 1" TO 1-3/8" SHANKS Reliable Tool Inc. c 2011 | Powered by
|
|
|
LOT OF PRECISION HSS BORING BARS 3/8" TO 3/4" SHANKS
aims LOT OF PRECISION HSS BORING BARS 3/8" TO 3/4" SHANKS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Lot of Precision Boring Bars in good condition. Specifications: Shanks: 3/8" to 3/4" Overall Length: 2-1/2" to 5" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF PRECISION HSS BORING BARS 3/8" TO 3/4" SHANKS Reliable Tool Inc. c 2011 | Powered by
|
|
|
Parlec CAT50 Precision Boring Head & Tool Holder
Parlec Precision Boring Head and Tool Holder Like New. Used one time and never used again. Contains: 1- CAT50 Precision Boring Head(PC6-2015TR- new part# PC6-20SDE62B) 1- Boring head tool holder(C50-PC6-4) Retails for: $1.715 Will Sell For: $850
|
|
|
LOT OF PRECISION ASSORTED CARBIDE TIPPED BORING BARS
aims LOT OF PRECISION ASSORTED CARBIDE TIPPED BORING BARS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Lot of Precision Boring Bars in good condition. Specifications: Cutting Diameters: 1/2" to 1" Shanks: 7/8" to 1" Overall Length: 6" to 8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF PRECISION ASSORTED CARBIDE TIPPED BORING BARS Reliable Tool Inc. c 2011 | Powered by lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13f6373a462-0xf6-
|
|
|
PRECISION 3/8" ADJUSTABLE BORING HEAD SET w/ 1/2" SHANK
aims PRECISION 3/8" ADJUSTABLE BORING HEAD SET w/ 1/2" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Precision Adjustable Boring Head Set in good condition. Set Includes: 1/2" Shank Boring Bars/ Bits& Allen Wrench. Specifications: Capacity: 3/8" Head Diameter: 2" Head Length: 1-3/4" Shank: 1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PRECISION 3/8" ADJUSTABLE BORING HEAD SET w/ 1/2" SHANK PRECISION 3/8" ADJUSTABLE BORING HEAD SET w/ 1/2" SHANK ... morePRECISION 3/8" ADJUSTABLE BORING HEAD SET w/ 1/2" SHANK Reliable Tool Inc. c 2011 | Powered by g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13f7131d8f2-0xed-
|
|
|
TREE UNIVERSAL TAPER BORING HEAD tool machine precision cutter mill lathe
He was a precision machinist. Engineer and life-long multi-talented'idea man' He held a number of US Patents and always took very. Very good care of his tools. Comes with original factory instructions and brochure. Buyer will receive the EXACT item shown in the photos. INSTRUCTIONS FOR U.S.A. BUYERS We ship only to your address provided to us by PAYPAL–take care to verify the address that is on file with PAYPAL prior to making payment! METHODS OF PAYMENT and SHIPPING DETAILS FOR U.S.A. BUYERS WITH U.S.A. LOWER 48 U.S.A. STATES SHIP PING DESTINATION…Pay for this auction using Paypal…Economy shipping and handling on this auction listing will be just 10.95 to the LOWER 48 U.S.A. STATES if your delivery address is a EBAY/ PAYPAL confirmed address We do offer shipping options other than'ECONOMY' if you need to receive your purchase ... moremore quickly-click on… Shipping and payments/ see more services/ see all details… at top of listing for details. Shipping to Alaska. Hawaii, Guam, APO/ FPO, Puerto Rico, Saipan or anywhere not located in the LOWER 48 U.S.A. STATES will be more-buyers from any of these locations need to figure in the higher shipping costs BEFORE they purchase-if buyers from these locations have an'issue' with these shipping costs- DO NOT PURCHASE THIS ITEM! FOREIGN = NON-USA BUYERS = SEE SHIPPING INFORMATION BELOW) Handling fee of 5.99 is REQUIRED for any shipment to UNCONFIRMED ebay/ paypal shipping address. Sellers are not responsible for service transit time. Note that transit times may vary. Particularly during peak periods.
|
|
|
KENNAMETAL PRECISION INDEXABLE BORING BAR W/ INSERTS # S20-DCLNR4
aims KENNAMETAL PRECISION INDEXABLE BORING BAR W/ INSERTS# S20-DCLNR4 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Kennametal. Model# S20-DCLNR4. This is an Indexable Boring Bar in Good condition. Specifications: 1 1/4" Straight Shank. Overall Lengths: 6-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KENNAMETAL PRECISION INDEXABLE BORING BAR W/ INSERTS# S20-DCLNR4 Reliable Tool Inc. c 2011 | Powered by
|
|
|
KURODA Precision Industries Ltd UFB-2 Universal facing and boring head R-8
For sale KURODA Precision Industries LTD UFB-2 Universal facing and boring head kuroda 823018. UFB-2 R-8 U7/16,
|
|
|
U.S.A!! FRAY PRECISION 1/2" BORING HEAD W/ 1" SHANK & INDEXABLE BORING BAR
aims U.S.A! FRAY PRECISION 1/2" BORING HEAD W/ 1" SHANK& INDEXABLE BORING BAR read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Fray. This is a Precision Boring Head& Indexable Boring Bar in good condition. Specifications: Head Diameter: 3" Head Length: 2-1/4" Boring Bar Hole Size: 1/2" Shank: 1" Indexable Boring Bar: 423" Overall Length: 6-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! FRAY PRECISION 1/2" BORING HEAD W/ 1" SHANK& ... moreINDEXABLE BORING BAR U.S.A! FRAY PRECISION 1/2" BORING HEAD W/ 1" SHANK& INDEXABLE BORING BAR Reliable Tool Inc. c 2011 | Powered by
|
|
|
Precision Tool Universal boring and facing head, Morse #4 shank
Here is a Precision Tool universal boring and facing head. It looks nice. It uses 3/4" diameter bars. Free shipping to 48 states. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Contact me at warren9(at)zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. Sales tax is charged for PA sales unless exempt*
|
|
|
PRECISION 5/8" INDEXABLE BORING BAR + INSERTS
aims PRECISION 5/8" INDEXABLE BORING BAR + INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is an Indexable Boring Bar w/ Inserts in good condition. Specifications: Current Bore Diameter: 3/4" Shank Diameter: 5/8" Overall Length: 6-1/2" Replacement Inserts: 2. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PRECISION 5/8" INDEXABLE BORING BAR + INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
PRECISION UNIVERSAL TOOL BORING HEAD SET: #2 MT with 3 3/8" HEAD
PRECISION UNIVERSAL TOOL BORING HEAD SET: 2 MT with 3 3/8" HEAD- USED PRECISION UNIVERSAL TOOL BORING HEAD SET INVENTORY# 3689 S/N 2-8922 SPECIFICATIONS: HEAD DIAMETER: 3 3/8 SPINDLE TAPER: 2 MT COMPLETE SET AS PICTURED INCLUDES WOOD BOX GOOD CONDITION FOB Our Floor CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. Allowing you to run multiple three phase motors off single phase power! DISCLAIMER: The information and pictures are believed to be accurate to the best of our knowledge. Obtained from sources deemed reliable. However, we do not guarantee accuracy ... moreof information and cannot be responsible for any errors or omissions. An inspection should be made. The information on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Please contact one of our sales representatives if you require more information or a current formal quotation. NORMAN MACHINE TOOL. LTD. CONDITIONS OF SALE: INSPECTION AND TEST EQUIPMENT Inspection& Test Equipment will be sold"AS IS" with a conditional return policy on a case by case basis. Please ask questions! The equipment's condition stated in the listing is accurate to the best of our knowledge. We do not specialize in these products and have no way of checking them beyond visual and some minor mechanical functions. We assume most of this equipment must be calibrated professionally. We feel the low prices we offer more than makes the equipment a great value! MDNA 30 DAY WARRANTY Every used machine offered(unless sold on an"as is" basi
|
|
|
CRITERION PRECISION BORING HEAD MOD. 1-1/2 CAT40 HOLDER FREE SHIP USA LOT C4745
LOT C4745 WE ARE OFFERING A CRITERION PRECISION BORING HEAD MOD. 1-1/2 WITH CAT40 HOLDER FREE SHIPPING USA USES 3/8" BORING BAR YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
PRECISION 2" INDEXABLE BORING BAR + 3 INSERTS
aims PRECISION 2" INDEXABLE BORING BAR + 3 INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is an Indexable Boring Bar w/ 3 Inserts in good condition. Specifications: Current Bore Diameter: 2-1/4" Shank Diameter: 2" Overall Length: 14" Replacement Inserts: 3. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PRECISION 2" INDEXABLE BORING BAR + 3 INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
CRITERION PRECISION BORING HEAD MOD. 2 WITH CAT40 HOLDER FREE SHIP USA LOT C4744
LOT C4744 WE ARE OFFERING A CRITERION PRECISION BORING HEAD MOD. 2 WITH CAT40 HOLDER FREE SHIPPING USA USES 1/2" BORING BAR YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
CRITERION PRECISION BORING HEAD MOD. 2 WITH R8 SHANK FREE SHIP USA LOT C4743
LOT C4743 WE ARE OFFERING A CRITERION PRECISION BORING HEAD MOD. 2 WITH R8 SHANK FREE SHIPPING USA USES 1/2" BORING BAR YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14011b75ab3-0xff-
|
|
|
CRITERION PRECISION BORING HEAD MOD. 1-1/2 WITH R8 SHANK FREE SHIP USA LOT C4742
LOT C4742 WE ARE OFFERING A CRITERION PRECISION BORING HEAD MOD. 1-1/2 WITH R8 SHANK FREE SHIPPING USA USES 3/8" BORING BAR YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
CRITERION PRECISION BORING HEAD MOD. 1-1/2 WITH R8 SHANK FREE SHIP USA LOT C4741
LOT C4741 WE ARE OFFERING A CRITERION PRECISION BORING HEAD MOD. 1-1/2 WITH R8 SHANK FREE SHIPPING USA USES 3/8" BORING BAR YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
PRECISION UNIVERSAL TOOL BORING HEAD W/BOX PROPERTY OF U.S. NAVY
PRECISION UNIVERSAL TOOL BORING HEAD. IT HAS A 3 3/8" HEAD ON THE BORING TOOL SIDE LOOKS LIKE A 7/8INCH SHANK THAT HAS BEEN CUT DOWN TO TWO INCHES IN LENGTH,COMES WITH ORIGINAL BOX WITH A TAG PROPERTY OF US NAVY BOX MEASURES 13 1/4" WIDE,7 1/2" DEPTH,5 1/4" TALL. THE HEAD LOOKS TO BE VERY CLEAN AND WELL OILED WHILE IN STORAGE.MADE BY PRESCISION TOOL CO. BROOKLYN N.Y. SEE PICTURES shipping to lower 48 states only
|
|
|
urma precision adjustable boring head 1.97 to 2.64in.
versamax boring system. Better known as Urma precision adjustable boring head. Cat 50 serial# 25-42-01( 1.969 to2.638) range. In well kept condition. buyer to pay all shipping cost first. Bid with confidence. ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-140174c8f7b-0x100-
|
|
|
GERMANY!! SCHMID PRECISION 1/2" BORING & FACING HEAD w/ 5/8" SHANK & CASE
aims GERMANY! SCHMID PRECISION 1/2" BORING& FACING HEAD w/ 5/8" SHANK& CASE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Germany by Schmid Precision Tools. This is a Precision Boring Head w/ Case in GREAT condition. Specifications: Head Diameter: 3-5/32" Head Length: 3" Boring Bar Hole Size: 1/2" Shank Diameter: 5/8" Overall Length: 6-3/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. GERMANY! SCHMID PRECISION 1/2" BORING& FACING HEAD w/ 5/8" SHANK& CASE ... moreGERMANY! SCHMID PRECISION 1/2" BORING& FACING HEAD w/ 5/8" SHANK& CASE GERMANY! SCHMID PRECISION 1/2" BORING& FACING HEAD w/ 5/8" SHANK& CASE GERMANY! SCHMID PRECISION 1/2" BORING& FACING HEAD w/ 5/8" SHANK& CASE GERMANY! SCHMID PRECISION 1/2" BORING& FACING HEAD w/ 5/8" SHANK& CASE GERMANY! SCHMID PRECISION 1/2" BORING& FACING HEAD w/ 5/8" SHANK& CASE Reliable Tool Inc. c 2011 | Powered by f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-140174c90d6-0xf6-
|
|
|
Three Armstrong Clamp Style Boring Bars Mini Machining Precision Work
For precision. Small work three Armstrong clamp-style boring bars in very good condition. From the bottom to the top are.83-561, 3/16" dia. that is 5" long.83-563, 1/4" dia. 6" long.83=565, 3/8" dia. 7" long. At the very top is a split sleeve for the smallest(83-561) boring bar. It is a little over 5/8" in diameter and 3" long. The smallest bar and the largest one are missing one screw, no oxidation, no owners marks and no repairs. Thanks for looking.
|
|
|
PRECISION UNIVERSAL HEAD TOOL BORING BAR VINTAGE
PRECISION UNIVERSAL HEAD TOOL SERIAL#2-9792. FEEL FREE TO ASK QUESTIONS I WILL ANSWER TO THE BEST OF MY ABILITY
|
|
|
JRMF PRECISION BORING HEAD 0.036-1.57
Used. Balanceable micro-adjustable precision boring head. Swiss made by JRMF. max 15000rpm. Boring range from 0.036 dia to1.57 dia. It accepts boring tool shank 16mm dia. Type of mount is Alpha Mount 4(shank 24mm and shank thread M22x2.5) The head is similar to Command/URMA boring head#05-42-21. This is something wrong with micro adjustment. It does not repeat position and it is almost impossible to set it. The head is not working properly! I consider item for repair or for parts. The head was previously mounted on BT30 B2U4-0004 tool holder from Command Tooling. Email me any question before bidding.
|
|
|
INFINITY PRECISION 3/8" ADJUSTABLE BORING HEAD SET w/ 1" SHANK
aims INFINITY PRECISION 3/8" ADJUSTABLE BORING HEAD SET w/ 1" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Precision Adjustable Boring Head Set in good condition. Set Includes: 1" Shank Boring Bars/ Bits& Allen Wrench. Specifications: Capacity: 3/8" Head Diameter: 2" Head Length: 1-1/2" Shank: 1" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. INFINITY PRECISION 3/8" ADJUSTABLE BORING HEAD SET w/ 1" SHANK INFINITY PRECISION 3/8" ADJUSTABLE BORING HEAD SET ... morew/ 1" SHANK Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-140419a0443-0xf9-
|
|
|
D'Andrea Boring Head TRM50/50 Precision Mill Machinist Cutting Tools Heads Italy
D'Andrea Boring Head TRM50/50 Precision Mill Machinist Cutting Tools Heads Italy This Boring Head appears to be in Like New condition- apparently the supplier's overstock. It was acquired in"as is" condition and are being sold the same"as is" see pictures for details. You are buying this item exactly as shown in the pictures. You will receive One D'Andrea Boring Head for the price shown. Please ask questions prior to making a bid* Buyer Pays Flat rate Shipping Local Pickup is always an option- If you would like to pickup your item locally- send a request at the end of the auction and ask to be invoiced for local pickup. Seller will ship item within 1 days of Auction Close and provide Buyer with a confirmation of shipping. FEEDBACK: If you are unhappy for any reason. Please contact us prior to leaving any neutral ... moreor negative feedback. We strive for 100% customer satisfaction and hope you will give us the opportunity to correct any potential problems. We leave positive feedback for all customers who have completed a successful transaction with us. Returns are accepted for refund within 14 days. Buyer is responsible for return shipping costs and must contact seller prior to returning item. Returned items must be received by Seller in same condition as they were shipped in prior to refund being issued. NOTE: All item(s) being sold are in"as is" condition and exactly as shown in the pictures. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1405af95b03-0xfd-
|
|
|
Precision Universal Tool Inc. ,Boring / Facing Head #4 MT with box and tooling
The precision Universal Tool Co. Tool Head Boring and facing with box and some tooling in good shape
|
|
|
CRITERION PRECISION BORING HEAD CAT 40 SHANK - KENNAMETAL VALENITE ISCAR
This is a lightly used CRITERION PRECISION BORING HEAD on a CAT 40 shank. Each division =.001" It's in great shape with no damage. There is a 1/2" shank(mini) boring bar included. This is a quality made piece of tooling. Get it while you can. Please see pictures to see exactly what is included. Don't miss this one! FREE PRIORITY MAIL SHIPPING INCLUDED! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments ... moreon fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
|
|
|
KAISER PRECISION BORING HEAD 310.615 EWB x KA6 With Kaiser holder.
KAISER PRECISION BORING HEAD 310.615 EWB x KA6 With Kaiser holder. Excellent condition. Autobalance.
|
|
|
USED KAISER HIGH PRECISION BORING HEAD 10.112.311 EW2-32 (.078" to 1.260")
LISTING IS FOR A USED KAISER HIGH PRECISION BORING HEAD BRAND- KAISER CAT# 10.112.311 SERIES- EW2-32 BORING RANGE- 078" to 1.260" ADJUSTMENT- 138" BORE SIZE- 12.00mm COUPLER- KA5"INCH" CALIBRATED(DIAL READING 1 DIV=.0005" ON DIA) CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: ... morePAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE PO
|
|
|
USED & DAMAGED KAISER HIGH PRECISION BORING HEAD 10.112.113 For Parts or Repair
LISTING IS FOR A USED AND DAMAGED KAISER HIGH PRECISION BORING HEAD BRAND- KAISER CAT# 10.112.113 BORING RANGE- 078" to 1.673" ADJUSTMENT- 177" BORE SIZE- 625" COUPLER- KA6"INCH" CALIBRATED(DIAL READING 1 DIV=.0005" ON DIA) CONDITION- USED. DAMAGED FOR PARTS OR REPAIR Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS ... moreA COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UP
|
|
|
4 CLARK PRECISION LEVER-LOCK SQUARE BIT BORING BAR SET
aims 4 CLARK PRECISION LEVER-LOCK SQUARE BIT BORING BAR SET read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Clark. These are 4 Square Tool Bit Boring Bar Set in GREAT condition. For General purpose turning. Facing and boring. Features: Both Boring Tool Holders are capable of holding tool bits on both ends In a horizontal& 45 Deg. angles. Specifications: Tool Bit Capcities: 092" 123" 185" 250" Shank Sizes: 3/16" 1/4" 3/8" 1/2" Overall Lengths: 5" 6" 7" 8" Comes as shown In pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! ... moreBidding starts at a dollar with no reserve. 4 CLARK PRECISION LEVER-LOCK SQUARE BIT BORING BAR SET 4 CLARK PRECISION LEVER-LOCK SQUARE BIT BORING BAR SET Reliable Tool Inc. c 2011 | Powered by
|
|
|
CHANDLER-DUPLEX - PRECISION 1/2" BORING HEAD W/ 3/4" SHANK
aims CHANDLER-DUPLEX- PRECISION 1/2" BORING HEAD W/ 3/4" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Chandler-Duplex. This is a Boring Head in great condition. Specifications Boring Bar& Tool Hole Diameter: 1/2" Shank: 3/4" Head diameter: 2.103" Overall Length: 7-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CHANDLER-DUPLEX- PRECISION 1/2" BORING HEAD W/ 3/4" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
PRECISION INDEXABLE BORING BAR 1-1/4" SHANK
aims PRECISION INDEXABLE BORING BAR 1-1/4" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Model# R579.0C-323222-16 This is a Precision Indexable Boring Bar in Good condition. Specifications: Top Diameter from insert tip: 1-1/2" 1 1/4" Straight Shank. 13-3/4" Overall Length. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PRECISION INDEXABLE BORING BAR 1-1/4" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
Tecnara precision boring head with CAT40 shank, 2.165 - 2.874" range, NR
Up for bidding is a Tecnara precision boring head in good condition with CAT40 shank and pull stud. Spanner wrench and T6 Torx key The head is 1.97" in diameter. 5.2" gage length, 2.165- 2.874" boring range It uses triangular insert TPGT 080204L Reliable tenth set precision adjustment Advanced coolant through body Unsurpassed accuracy and repeatability Rock solid construction and outstanding workmanship One of the best boring head for your expensive high value parts Made in Japan with the name KKS Kyushukogu on body. Head can be removed from shank with the included spanner wrench The 6" scale in pic is for reference only and is not included with this auction Good luck and happy bidding
|
|
|
vintage Moore precision/machinery tool box for boring chuck set
A vintage wooden precision tool box for a boring chuck set.by Moore. It measures 11" X 7" X 6"the chart of the boring bits is not ripped or torn just dirt on it. The inside looks in tact and good except for marks from normal use, but overall it is in great shape still, and the outside has scratches from normal use also.It has 2 hinges in front for opening, one seems to stick occasionally but I am sure that is easy to get operating perfect again, it also has a metal Moore Tool sign on the front, not a decal or painted on.This would make a excellent piece for a tool box collector or just to have for storing the proper tool.
|
|
|
SECO EPB GRAFLEX A780 50 Precision Boring Head (2.520" – 3.390")
SECO EPB GRAFLEX A780 50 Precision Boring Head(2.520" 3.390" This auction is for one Contacting Us. We Respond To Offers& Emails Monday-Friday Before 2:00pm Central Time. We are closed on Weekends and Holidays. We work with several companies to help liquidate their tooling. Our descriptions are close as we can get to the item. But there are times that a tool has special grindings that have been done and we are unaware of that. Just let us know of the problem. We will make it right with you. Call 573-431-3856 Extension 7320 or email. I am the eBay Coordinator and I am here to help! Some items sold may have customer engravings on tools. But this does not affect the quality of the tool. Some pictures may show other items, but only the items described are included(i.e. carbide inserts, rulers, tools, etc. If the item is listed as"Seller ... moreRefurbished" or"Regrind" please be aware that exact dimensions of the tool may have changed in the grinding process and for special orders. Please ask questions before buying if this is a concern.From time to time, items have been misplaced or put back in use. We apologize for this in advance and will refund your money promptly if this happens. We offer a 14-day Money Back Guarantee. Any items needed returned will receive a full refund(or if you prefer an exchange) And must be in the condition it was sold. Please advise us of any problems with purchases before returning or leaving feedback. We are here to make sure that you are a happy customer. We will pay the postage for all returns. Payments& Shipping. We accept instant PayPal payment or credit/debit card through PayPal. Payment in full is expected within 3 days after purchase or product availability will not be guaranteed after 5 days. All orders will be processed within 3-5 business days. Payments received Thursdays after 2pm Central Time and Fridays. Weekends and Holidays will be processed on the next business day. We do combine shipping. Please follow these procedures to ensure proper shipp
|
|
|
H.B. ROUSE HSS PRECISION INDEXABLE BORING BAR 7/8" SHANK
aims H.B. ROUSE HSS PRECISION INDEXABLE BORING BAR 7/8" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in U.S.A. by H.B. Rouse. Model#s: RT100 This is a Precision Indexable Boring Bar in good condition. Specifications: Current Cutting Diameter: 13/16" 7/8" Straight Shank. Overall Length: 9" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. H.B. ROUSE HSS PRECISION INDEXABLE BORING BAR 7/8" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
PRECISION NO. 2 E-Z SET MICROBORE BORING TOOL W/ B&S #9 TAPER SHANK
aims PRECISION NO. 2 E-Z SET MICROBORE BORING TOOL W/ B&S#9 TAPER SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Microbore Boring Tool in good condition. Specifications: Max Bore Diameter: 13/16" Head Diameter: 2" Head length: 5" Shank: B&S#9 Taper. Overall Length: 11-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PRECISION NO. 2 E-Z SET MICROBORE BORING TOOL W/ B&S#9 TAPER SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
Precision Universal Tool Head for Boring, SN 2-8839, 1" Shank, Boring Head, Bar
Precision Universal Tool Head for Boring. SN 2-8839, 1" Shank. The tool looks very good and seems to function fine. It spins and the adjustments all seem to move fine. We have no way of checking the full operation as we have no machine to mount 1" shank. We offer a full return guarantee. Some light surface rust is noted that will clean up nicely. We will gently wire wheel it prior to packing. Visit our eBay store for more great values. Shipping and handling costs for this listing will be $12.95 within the U.S.A. We will ship internationally if a cost or calculator shows below. Or please inquire for international shipping costs. We will ship promptly and will do all we can to make sure you are satisfied with your purchase. Sales. And invoices for sales within the state of Michigan will have sales tax added. Thank you! 0913)
|
|
|
Command Urma precision boring head and holder 1.5" - 2.0" range
Command Urma precision boring head the head has.0002 res per div. The boing head is mounted to a CAT 50 holder but can be removed. it is made to cut diameter 1.5" 2.0" included is a 2" extension. Posted with
|
|
|
CHANDLER DUPLEX PRECISION BORING HEAD TOOL MILLING BRIDGEPORT MACHINIST TOOL *14
CHANDLER DUPLEX PRECISION BORING HEAD TOOL MILLING BRIDGEPORT MACHINIST TOOL info/sizes: The shaft is 5/8 x 3 inches. Holds boring tools that are 1/2" in diameter. Works smoothly and perfectly. I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 2 days of auction close. Let me know if you are bidding on multiple items and I will give you a payment extension. Foreign buyers are ... moreresponsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee! 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-1431f1bb66c-0xfe-
|
|
|
Devlige #50 Taper Precision Boring Head
For 3/8" bars
|
|
|
Valenite RBN-400 Vari-Set Dovetail Precision Boring Bar Head w/ Indexable Carbid
Up for sale here is a Valenite RBN-400 Vari-Set Dovetail Precision Boring Bar Head w/ Indexable Carbide Cartridge. 3" body diameter. It has a BC-341-P insert cartridge installed. Complete with carbide. Used in good condition. Feel free to ask any questions. SCT3212.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1438ed35920-0x107-
|
|
|
VALENITE PRECISION INDEXABLE BORING BAR MODEL S08R-SCLPR-2 1/2" SHANK
Valenite Indexable Boring Bar Model S08R-SCLPR-2 1/2" Shank x 8" Overall Length Includes Original Box Good Condition! No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end ... morenotice. I f you pay immediately following auction end- we will ship. Payment MUST be received within 5 business days of earliest auction end. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. We do not issue partial refunds.
|
|
|
Valenite Vari-Set RBN-21PA Dovetail Precision Boring Bar Head Indexable Carbide
Welcome! Up for sale is a Valenite Vari-Set RBN-21PA Dovetail Precision Boring Bar Head Indexable Carbide 1-3/4" Body. Used in good condition. Feel free to email any questions! SCT3181
|
|
|
Valenite Loc-A-Dex HBN-111 Precision Boring Head Indexable Carbide Holder 2" Bod
Welcome! Up for sale is a Valenite Loc-A-Dex HBN-111 Precision Boring Head Indexable Carbide Holder 2" Body. Used in good condition. Feel free to email any questions! SCT3182
|
|
|
Valenite Vari-Set RBN-300 Precision Dovetail Boring Bar Head w/ BC-360P Indexabl
Welcome! Up for sale i s a Valenite Vari-Set RBN-300 Precision Dovetail Boring Bar Head w/ BC-360P Indexable Carbide Cartridge. 2-1/4" body dia. Used in good condition. Feel free to email any questions! SCT3183
|
|
|
VALENITE PARLEC PRECISION BORING HEAD PC4-2415
856-881-3185 SKU: AFI166 VALENITE PARLEC PRECISION BORING HEAD PC4-2415. Brand: Parlec Condition: Used Model: PC4-2415 Lot# AFI 166 Vid 3.7.1 We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is something we ... morehave no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECEIVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To pla
|
|
|
MITSUBISHI SOLID CARBIDE SUPER PRECISION INDEXABLE BORING BAR 3/16" SHANK
Mitsubishi Super Precision Indexable Boring Bar Solid Carbide Model MSWLOR055 3/16" Shank x 3-15/16" Overall Length Accepts Triangular Inserts Good Condition! No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be ... moreinvoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
PRECISION INDEXABLE BORING BAR MODEL GHIR 12.7-2 1/2" SHANK
Precision Indexable Boring Bar Model GHIR 12.7-2 1/2" Shank x 5" Overall Length Good Condition! No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay ... moreimmediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
KENNEMETAL ROMICRON SVS4B Precision Boring Head (KR50SVS4B094M) range 78-98mm
KENNEMETAL ROMICRON SVS4B Precision Boring Head(KR50SVS4B094M) range 78-98mm. Increment 0.002mm fitted with carbide insert tool holder and one carbide cutting tool. Excellent condition.
|
|
|
Precision 3/16" Cap. Indexable Boring Bar W/ 1/2" Shank
ALL YOUR AUCTION NEEDS START@ THEPLACETOBUY1984! The Item You Are Bidding On Is a Indexable Boring Bar Item Specifications: Shank: 1/2" Capacity: 3/16" Overall Length: 4-1/4" ITEMS COME AS SHOWN IN PICTURES. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. BEFORE PAYING. PLEASE ASK FOR SHIPPING DISCOUNT ON MULTIPLE ITEM PURCHASE. ALSO, PLEASE E-MAIL OR PM IF YOU HAVE QUESTIONS OR CONCERNS ON SHIPPING& HANDLING. How to Request an Invoice so Shipping is Correct and Up To Date: 1. Click COMMIT TO BUY. 2. DO NOT CLICK PAY NOW. 3. Go to Ebay Summary. Under PURCHASES. 4. Select MORE ACTIONS. 5. Select REQUEST TOTAL. Shipping on Multiple Items: You Will Get Charged For The Most Expensive Item You Purchased. Extra Items 2-5 get a 30% Discount ... morePer Item. Items 6 or More Get a 45% Discount per Item. THANK YOU FOR LOOKING! And Good Luck Bidding!
|
|
|
ROMICRON PRECISION BORING HEAD CAT 40 SHANK - 71 to 111 mm RANGE - KENNAMETAL
This is a used KENNAMETAL ROMICRON PRECISION BORING HEAD on a CAT 40 shank. Part number is KR50SVU65110M and it has a range of 71-111 mm. It's in very good cosmetic shape with no damage except some staining on the shank. There is a genuine Kennametal boring bar attachment included with used insert) This is a quality made piece of tooling. Get it while you can and feel free to make me a reasonable offer. Please see pictures to see exactly what is included. Don't miss this one! FREE PRIORITY MAIL SHIPPING INCLUDED! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ... more~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I a
|
|
|
Tecnara precision boring head with 0.75" straight shank, excellent condition, NR
Up for bidding is a Tecnara boring head with 0.984- 1.26 range. 6.4" overall length, 0.75" diameter x 3.0" long straight shank. The boring head is in excellent condition. Fully functional, ready to use. 0.0004" division. 0.0001" vernier on dial Unsurpassed accuracy and repeattability Uses insert TPGT 080204L Made in Japan No reserve Good luck and happy bidding
|
|
|
Command Urma precision boring head and holder .89" -1.18" 22.5-30mm range
URMA Precision Boring Head With Command adapter C4U4-0001 Range: 89" 1.18" 22.5mm- 30mm Div: 0.0002" There are No Guarantees. ALL items are sold AS-IS. No returns. Returns will be accepted if there was an error in the description. Buyer must contact and arrange for return prior to returning item. All efforts are made to describe items as they are and to make sure customers purchases are as they expect.
|
|
|
CARMEX PRECISION 3/4" INDEXABLE THREADING BORING BAR + INSERTS
CARMEX PRECISION 3/4" INDEXABLE THREADING BORING BAR + INSERTS Model No. SIR 0750-P16 Size: 3/4" OAL: 7" Inserts: 9* Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need some thing. Don't see it listed drop us a line@ Rand.auctions@gmail.com* 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1445c705473-0x115-
|
|
|
Criterion CB3-TP-TA Offset Cribore Boring Head Precision Fine Boring Tool
Description Criterion CB3-TP-TA Offset Cribore Boring Head 1 Div. =.000050 With CAT50 Shank Payment Payment must be made within 3 days of purchase. To pay by Visa/MC please call 973-610-2326. Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement equipment. construction equipment.and more. ... moreWe are committed to 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1447b1e0738-0xff-
|
|
|
Kennametal Romicron Precision Fine Boring Tool SVS5B 97 - 117 mm
Description Kennametal Romicron Precision Fine Boring Tool CAT 50 R55361G RD7 R55362F RD7 KRK50SVS5B094M(002 mm) SVS5B 97- 117 mm Payment Payment must be made within 3 days of purchase. To pay by Visa/MC please call 973-610-2326. Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement equipment. ... moreconstruction equipment.and more. We are committed to 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
|
|
|
BRIDGEPORT NO.2 MICRO PRECISION 5/8" BORING HEAD,1" SHANK DIAMETER
Inventory Number: 12131470082 Manufacturer: Description: BRIDGEPORT NO.2 MICRO PRECISION 5/8" BORING HEAD.1" SHANK DIAMETER Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do ... moreNOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for
|
|
|
Kaiser 10.310.311 Precision Finish Boring Head (Range 1.260” -2.362”) KAB2/EWN32
The listing price is for 1 boring head. Original Packaging or Containers May Not Be Included Offers& eMails: I will respond to all Offers and Email Messages Monday through Friday until 2:00pm Central Time. We are closed Weekends& Holidays. Offers expire within 48 hours. So if an offer is made after 2:00pm on Friday, it will expire before I am able to respond. PayPal: We accept instant PayPal payment or credit/debit card through PayPal. Payment in full is expected within 3 days after purchase or product availability will not be guaranteed after 5 days. All orders will be processed within 3-5 business days. Payments received Thursdays after 2pm Central Time and Fridays. Weekends and Holidays will be processed on the next available business day. Item Information: Some items sold may have customer engravings on tools. But this does not ... moreaffect the quality of the tool. Some pictures may show other items, but only the items described are included(i.e. carbide inserts, rulers,original packing, tools, etc. If the item is listed as"Seller Refurbished" or"Regrind" please be aware that exact dimensions of the tool may have changed in the grinding process and for special orders. Please ask questions before buying if this is a concern.From time to time, items have been misplaced or put back in use. We apologize for this in advance and will refund your money promptly if this happens. Refunds/Exchanges: We offer a 14-day Money Back Guarantee. Any items needed returned will receive a full refund(or if you prefer an exchange) And must be in the condition it was sold. Please advise us of any problems with purchases before returning or leaving feedback. We are here to make sure that you are a happy customer. We will pay the postage for all returns. Sales Tax: Please be aware that our company has a Physical Presence(Nexus) in AL. AZ, CA, CO, CT, FL, GA, IA, KS, KY, LA, MA, MI, MN, MS, MO, NY, NC, ND, OH, SC, TN, TX, VT, VA, WA and is required by law to collect and remit sales tax for all on-line sales ship
|
|
|
SECO EPB GRAFLEX A780 60 Precision Boring Head (3.345" - 5.670")
I have a used SECO EPB GRAFLEX A780 60 Precision Boring Head(3.345" 5.670" for sale. It is in great shape and wouldn't be selling if I didn't need the money. My loss your gain. Thanks for looking and happy bidding!
|
|
|
Precision Boring Head 135-180mm (0.001mm) Morse Taper 6 MT6 / Bohrkopf MK6
Description: Morse Taper 6 MT6 Boring bar(Cutter) hole diameter 16mm Scale 0.001mm 135-180mm Overall length 340mm Weight 11.66 kg Manufactured in USSR List price $950(w/o shipping) Shipping: FREE to Europe. N. S. America. UK for other locations: contact to get shipping costs If you have any questions please feel free to e-mail me To my International buyers. Although I don't charge for Shipping, I am not responsible for for any taxes. Fees, duties or other charges which. May be imposed by your post office or government agency in your country. If in doubt. Please check with your own post office before placing a bid.
|
|
|
ultra precision miniature boring head set
Up for auction is a vintage Ramsey 3/4 inch shank boring head with lockable(no key) hardwood storage box. This tool is in excellent used condition and comes with all original adapters and accepts toolbits with 1/8. 3/16 and 1/4 inch shanks. One solid carbide boring bar is included also. The only tool required for adjustment is included with the atttached dial for adjusment in.0001, one ten thousandths of an inch increments. This tool has only been used a handfull of times and will bore perfect precision holes ranging from 1/4- 3/4 inch diameter. Payment by PayPal only and is expected within 24 hours of winning bid. Thanks for looking and happy bidding. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144ee136f42-0x110-
|
|
|
PARLEC PC5-3515 PRECISION FINISH BORING HEAD WITH CAT 40 ADAPTER
PARLEC PRECISION FINISH BORING HEAD MODEL PC5-3515 2.087" 3.740" BORING RANGE 1 DIV. =.001" DIA. VERNIER =.0001" DIA. PARLEC CAT 40 ADAPTER
|
|
|
PRECISION MODEL SCLCR 6 2-3/8 INDEXABLE BORING BAR 3/8" SHANK
Precision Indexable Boring Bar Model SCLCR 6-2-3/8 3/8" x 5-1/8" Shank No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction ... moreend- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
Precision Universal Tool,Adjustable Boring Head
This is a NICE Precision Universal Co. Adjustable Boring Head. No. 4MT Shank. Nice wooden storage box.
|
|
|
CHANDLER DUPLEX PRECISION BORING HEAD 1/2" TOOL CAPACITY 2MT SHANK
Chandler Duplex Precision Boring Head w/ 2MT Shank 1/2" Tool Capacity 2MT Shank 1" Center No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately ... morefollowing auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14546788e3d-0x111-
|
|
|
Boring Bars - Precision Holes
Listed in this auction include various size boring bars(as shown) for a total of(10) Only a couple have been used and the rest are new. This set includes the following: 2- Bokum 7/16 shank dia. x 4.5 length 1- Bokum 7/16 shank dia. x 2.75 length 2- Criterion 3/8 shank dia. x 4.5 length 1- Criterion 7/16 shank dia. x 2.61 length 1- Bokum 9/16 shank dia. x 3.3 length 1- Bokum 5/16 shank dia. x 2.46 length 1- Mesa.512x.575 shank dia x 4.2 length 1- Bokum 15/16#H6B Bid with confidence!
|
|
|
ENCO PRECISION BORING HEAD W/ R8 SHANK 3/4" TOOL CAPACITY
Enco Precision Boring Head w/ R8 Shank Head Measures 3-1/2" Diameter x Approx. 4" Overall Height R8 Shank 3/4" Capacity No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction ... moreend notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
AUTOMATIC BORING HEAD mill milling holder 4 MT PRECISION UNIVERSAL TOOL HEAD
good used 4 morse taper shank automatic boring head Precision Universal Tool Head by The Precision Tool Co Brooklyn Ny USA 4 morse taper shank x holds 3/4" turns fine. exactly as pictured with no accessories please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Boring and Facing Head Precision Brand MT6 Shank
Precision Manufacturing Co. Universal Tool Head with a#6 Morse taper shank. Used- excellent condition. Does not appear to have been mounted in a spindle Comes with three stop bar sections and two extra shear pins. Box shows a bit of shelf wear on the outside. This outstanding boring/facing head needs to find a home where it can be used. Posted with
|
|
|
HEAVY DUTY PRECISION BORING HEAD 3/4" CAPACITY W/ 5MT SHANK
Heavy Duty Precision Boring Head w/ 5MT Shank 3/4" Capacity Boring Head 2-1/8" Center 5 Morse Taper Shank No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I ... moref you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
D'Andrea Precision Boring CAT40 Set
One new head. One manufacturer refurbished, with CAT40 holder. This is a beautiful set in pristine working order all in the original metal case.
|
|