In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
1450.03
Buy It Now
Free Shipping
Condition: New
Location: United States
This power base allows your Edhard filler unit to inject filling into a pastry decorate a pastry with icing or deposit a product into a container. It ... moregives you enough power to power to dispense batters creams custard jelly or chocolate.
$
1000.00
Buy It Now
$77.02 Shipping
Condition: Used
Location: Grafton, United States
Edhard stainless steel Model RP housing unit with stainless steel spout and 18-quart polycarbonate hopper . Designed for commercial use. Will be shipped ... moreUPS ground. 
$
225.00
Buy It Now
$43.38 Shipping
Condition: New
Location: Snoqualmie, United States
For Edhard Powerbases. Replaces Edhard Part #F-5001. 6qt Donut Filler Hopper with (2) Stainless Steel Spouts. Includes: Pump cover assembly, (2) Impellers, ... more& (2) Stainless Steel Spouts. Whether you are just starting up or need to revamp your entire operation, we are the ones to call.
$
89.99
Buy It Now
$16.23 Shipping
Condition: Used
Location: Oakdale, United States
This is in excellent used condition and has hardly been used. It converts one of your Edhard Spouts into 4 smaller spouts. This spacing results in the ... morefilling of choice being dispersed about 1" apart.
$
6340.00
Buy It Now
Condition: Used
Location: Philadelphia, United States
1 Edhard F-3390 SPOUT-CUPCAKE 4-1/4 (108MM) SP. 1 Edhard F-3405 SPOUT - CUPCAKE 3-1/4 (82.5MM. "These filler units are molded in clear, FDA approved polycarbonate. ... moreThey are available with 6-quart (5.5 liter) or 18-quart (17-liter) capacity hoppers and feature single or double outlets. ).
$
1466.00
Buy It Now
$36.25 Shipping
Condition: New
Location: Wayland, United States
This base works with Edhard F-Series Filler Units, Edhard F-5001 and F-5007. The power base engages with filler unit and makes the filler unit dispense ... moreproduct. The filler unit is required to dispense product.
$
12.00
Buy It Now
$14.78 Shipping
Condition: Used
Location: Philadelphia, United States
Eclair Spout for an edhard filler unit. Nice condition.
$
64.95
Buy It Now
$9.74 Shipping
Condition: Used
Location: Sturgeon Bay, United States
For Sale -EDHARD FS-3159 - Stainless Steel Pump Housing for Jelly Filler Hopper. Fits the heavy stainless hopper for the Edhard Jelly fillers. Series ... moreFS (gear type pump). Model Number 3159. Fits FS Jelly Filler Hopper.
$
2099.99
Buy It Now
$40.05 Shipping
Condition: New
Location: Mystic, United States
Edhard P-4012 with 1 Hopper. Hopper is complete a with spouts.
$
9.99
Buy It Now
Free Shipping
Condition: Used
Location: Pawtucket, United States
Our intention is not deceive anyone, we try to give you as much information as possible. All products are sold outside of manufacturers?. warranties may ... moreor may not apply.
$
74.00
Buy It Now
$15.01 Shipping
Condition: New
Location: Wayland, United States
Pump Cover Assembly and Impeller 2 Pack Combo Replaces Edhard F-3001 and F-3002 BIN# BBP168/171PLA
$
325.00
Buy It Now
Condition: Used
Location: Elk Grove Village, United States
Used Edhard F-5001 6 (6 QT) donut hopper. Price is per hopper. Sold per unit.
$
1650.00
Buy It Now
Condition: Used
Location: Elk Grove Village, United States
Used Donuts Jelly Filer Edhard. Edhard Machine Donut Hopper Only! Double Spout SS with 6-Qt. Units have been serviced and tested!
$
576.99
Buy It Now
Free Shipping
Condition: New
Location: East Bend, United States
Edhard F-5001 6 Qt Clear Double Spout for Donut/ Pastry Filler Unit Use this unit to fill doughnuts. Eclairs or even cream puffs. Model# F-5001, Material: ... morePolycarbonate, Includes 2 Standard Spouts, Double Spout Model, Capacity: 6 Qt, Gear type pump, Donut fillter, Height: 14" Width: 9" Length: 9" Weight: 7.5 lbs, Made in USA, Items Shipping Policy: Please include your street address. As we do not ship to PO boxes. Orders are normally shipped within 4 business days upon receipt of payment. Large equipment can take up to 4 days. On rare occasions that an item is unable to ship in the stated timeframe, you will be notified in 2 business days or less. Orders may be shipped in multiple packages. We do not ship to Alaska or Hawaii addresses, APO/FPO addresses or outside the US. Combined shipping is often available on identical items. Please click the shipping tab at the top of the item description to view any combined shipping options. To view our full Shipping Policy. Why Is Sales Tax Added To My Order? In accordance with applicable law. Wasserstrom is registered to collects tax in all states with the exception of Vermont and North Dakota. The Wasserstrom Company is required by law to charge tax for the states we are registered with Nexus. Here some cases in which a business might have a sales tax Nexus in a state: If the business has a physical location in the state, If there are resident employees working in the state, If the business has property(including intangible property) in the state, If there are employees who regularly solicit business in the state. Sales tax is applied to the total amount of the order and is based on the shipment's destination state and local sales tax rates. States that impose sales tax collection on Shipping& Handling expenses require that sales tax be applied to Shipping& Handling when the item that is being shipped is subject to sales tax. New Items Return Policy: Items still in new condition can be returned within 14 days of delivery for refund of the sale p
$
593.99
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Edhard F-5001 6 Qt Clear Double Spout for Donut/ Pastry Filler Unit Use this unit to fill doughnuts. Eclairs or even cream puffs. Model# F-5001, Material: ... morePolycarbonate, Includes 2 Standard Spouts, Double Spout Model, Capacity: 6 Qt, Gear type pump, Donut fillter, Height: 14" Width: 9" Length: 9" Weight: 7.5 lbs, Made in USA, Items Shipping Policy: Please include your street address. As we do not ship to PO boxes. Orders are normally shipped within 4 business days upon receipt of payment. Large equipment can take up to 4 days. On rare occasions that an item is unable to ship in the stated timeframe, you will be notified in 2 business days or less. Orders may be shipped in multiple packages. We do not ship to Alaska or Hawaii addresses, APO/FPO addresses or outside the US. Combined shipping is often available on identical items. Please click the shipping tab at the top of the item description to view any combined shipping options. To view our full Shipping Policy. Why Is Sales Tax Added To My Order? In accordance with applicable law. Wasserstrom is registered to collects tax in all states with the exception of Vermont and North Dakota. The Wasserstrom Company is required by law to charge tax for the states we are registered with Nexus. Here some cases in which a business might have a sales tax Nexus in a state: If the business has a physical location in the state, If there are resident employees working in the state, If the business has property(including intangible property) in the state, If there are employees who regularly solicit business in the state. Sales tax is applied to the total amount of the order and is based on the shipment's destination state and local sales tax rates. States that impose sales tax collection on Shipping& Handling expenses require that sales tax be applied to Shipping& Handling when the item that is being shipped is subject to sales tax. New Items Return Policy: Items still in new condition can be returned within 14 days of delivery for refund of the sale p
$
594.99
Buy It Now
Free Shipping
Condition: New
Location: Jacksonville, United States
Edhard F-5001 6 Qt Clear Double Spout for Donut/ Pastry Filler Unit Use this unit to fill doughnuts. Eclairs or even cream puffs. Model# F-5001, Material: ... morePolycarbonate, Includes 2 Standard Spouts, Double Spout Model, Capacity: 6 Qt, Gear type pump, Donut fillter, Height: 14" Width: 9" Length: 9" Weight: 7.5 lbs, Made in USA, Items Shipping Policy: Please include your street address. As we do not ship to PO boxes. Orders are normally shipped within 4 business days upon receipt of payment. Large equipment can take up to 4 days. On rare occasions that an item is unable to ship in the stated timeframe, you will be notified in 2 business days or less. Orders may be shipped in multiple packages. We do not ship to Alaska or Hawaii addresses, APO/FPO addresses or outside the US. Combined shipping is often available on identical items. Please click the shipping tab at the top of the item description to view any combined shipping options. To view our full Shipping Policy. Why Is Sales Tax Added To My Order? In accordance with applicable law. Wasserstrom is registered to collects tax in all states with the exception of Vermont and North Dakota. The Wasserstrom Company is required by law to charge tax for the states we are registered with Nexus. Here some cases in which a business might have a sales tax Nexus in a state: If the business has a physical location in the state, If there are resident employees working in the state, If the business has property(including intangible property) in the state, If there are employees who regularly solicit business in the state. Sales tax is applied to the total amount of the order and is based on the shipment's destination state and local sales tax rates. States that impose sales tax collection on Shipping& Handling expenses require that sales tax be applied to Shipping& Handling when the item that is being shipped is subject to sales tax. New Items Return Policy: Items still in new condition can be returned within 14 days of delivery for refund of the sale p
$
2375.00
Buy It Now
$178.69 Shipping
Condition: New
Location: Pennsauken, United States
WE ARE ALWAYS HERE TO HELP YOU. WE STRIVE FOR 100%. AND CONDITION.
$
870.50
Buy It Now
Free Shipping
Condition: Used
Location: Brooklyn, United States
For full item description.
$
30.79
Buy It Now
Free Shipping
Condition: New
Location: Addison, United States
Edhard F-2034 Thumb Screw. This is a geniune OEM part from Edhard. Use genuine OEM parts for safety reliability and performance.
$
30.22
Buy It Now
Free Shipping
Condition: New
Location: Addison, United States
Edhard P-2072 Boot. This is a geniune OEM part from Edhard. Use genuine OEM parts for safety reliability and performance.
$
32.44
Buy It Now
Free Shipping
Condition: New
Location: Addison, United States
Edhard F-2265-BAG Cap Spout Double 7/16 Dia. This is a geniune OEM part from Edhard. Use genuine OEM parts for safety reliability and performance.
$
27.34
Buy It Now
Free Shipping
Condition: New
Location: Addison, United States
Edhard P-2046 Trip Pin. This is a geniune OEM part from Edhard. Use genuine OEM parts for safety reliability and performance.
$
24.95
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
P-2046 Edhard Trip Pin Genuine OEM EDHP-2046.
$
56.95
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
F-3013 Edhard Spout - Eclair - Plain 7/16 D Genuine OEM EDHF-3013.
$
149.25
Buy It Now
Free Shipping
Condition: New
Location: United States
Pump Cover Assembly Replaces Edhard F-3001 BIN# BBP169PLA.
$
10.95
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
F-21605 Edhard Seal-O/Ring-142 Silicone Genuine OEM EDHF-21605.
$
20.75
Buy It Now
Free Shipping
Condition: New
Location: Addison, United States
Use genuine OEM parts for safety reliability and performance. Use genuine OEM parts for safety reliability and performance.
$
43.04
Buy It Now
Free Shipping
Condition: New
Location: Addison, United States
Edhard F-3013 Spout - Eclair - Plain 7/16 D. Edhard F-3013.
$
589.99
Buy It Now
Free Shipping
Condition: New
Location: Hollywood, United States
Edhard F-5001 6 Qt Clear Double Spout for Donut/ Pastry Filler Unit Use this unit to fill doughnuts. Eclairs or even cream puffs. Model# F-5001, Material: ... morePolycarbonate, Includes 2 Standard Spouts, Double Spout Model, Capacity: 6 Qt, Gear type pump, Donut fillter, Height: 14" Width: 9" Length: 9" Weight: 7.5 lbs, Made in USA, Items Shipping Policy: Please include your street address. As we do not ship to PO boxes. Orders are normally shipped within 4 business days upon receipt of payment. Large equipment can take up to 4 days. On rare occasions that an item is unable to ship in the stated timeframe, you will be notified in 2 business days or less. Orders may be shipped in multiple packages. We do not ship to Alaska or Hawaii addresses, APO/FPO addresses or outside the US. Combined shipping is often available on identical items. Please click the shipping tab at the top of the item description to view any combined shipping options. To view our full Shipping Policy. Why Is Sales Tax Added To My Order? In accordance with applicable law. Wasserstrom is registered to collects tax in all states with the exception of Vermont and North Dakota. The Wasserstrom Company is required by law to charge tax for the states we are registered with Nexus. Here some cases in which a business might have a sales tax Nexus in a state: If the business has a physical location in the state, If there are resident employees working in the state, If the business has property(including intangible property) in the state, If there are employees who regularly solicit business in the state. Sales tax is applied to the total amount of the order and is based on the shipment's destination state and local sales tax rates. States that impose sales tax collection on Shipping& Handling expenses require that sales tax be applied to Shipping& Handling when the item that is being shipped is subject to sales tax. New Items Return Policy: Items still in new condition can be returned within 14 days of delivery for refund of the sale p
$
527.95
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
F-5005 Edhard Filler Unit - Gear Type - Clea Genuine OEM EDHF-5005.
$
615.99
Buy It Now
Free Shipping
Condition: New
Location: Garner, United States
Edhard F-5001 6 Qt Clear Double Spout for Donut/ Pastry Filler Unit Use this unit to fill doughnuts. Eclairs or even cream puffs. Model# F-5001, Material: ... morePolycarbonate, Includes 2 Standard Spouts, Double Spout Model, Capacity: 6 Qt, Gear type pump, Donut fillter, Height: 14" Width: 9" Length: 9" Weight: 7.5 lbs, Made in USA, Items Shipping Policy: Please include your street address. As we do not ship to PO boxes. Orders are normally shipped within 4 business days upon receipt of payment. Large equipment can take up to 4 days. On rare occasions that an item is unable to ship in the stated timeframe, you will be notified in 2 business days or less. Orders may be shipped in multiple packages. We do not ship to Alaska or Hawaii addresses, APO/FPO addresses or outside the US. Combined shipping is often available on identical items. Please click the shipping tab at the top of the item description to view any combined shipping options. To view our full Shipping Policy. Why Is Sales Tax Added To My Order? In accordance with applicable law. Wasserstrom is registered to collects tax in all states with the exception of Vermont and North Dakota. The Wasserstrom Company is required by law to charge tax for the states we are registered with Nexus. Here some cases in which a business might have a sales tax Nexus in a state: If the business has a physical location in the state, If there are resident employees working in the state, If the business has property(including intangible property) in the state, If there are employees who regularly solicit business in the state. Sales tax is applied to the total amount of the order and is based on the shipment's destination state and local sales tax rates. States that impose sales tax collection on Shipping& Handling expenses require that sales tax be applied to Shipping& Handling when the item that is being shipped is subject to sales tax. New Items Return Policy: Items still in new condition can be returned within 14 days of delivery for refund of the sale p
$
607.36
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
Edhard 6 Qt Clear Double Spout Donut / Pastry Filler UnitUse this unit to fill doughnuts, eclairs or even cream puffs.Model #: F-5001 Material: Polycarbonate ... moreIncludes 2 Standard Spouts Double Spout Model Capacity: 6 Qt Gear type pump Donut fillter Height: 14" Width: 9" Length: 9" Weight: 7.5 lbs Made in USA 211764.
$
35.95
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
F2265-BAG Edhard Spout Closure, Red, 12Pk Genuine OEM EDHF2265-BAG.
$
10.95
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
P-2118 Edhard Screw Genuine OEM EDHP-2118.
$
26.95
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
P-2072 Edhard Boot Genuine OEM EDHP-2072.
$
10.95
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
F-20651 Edhard Cap Spout 9/32 Genuine OEM EDHF-20651.
$
422.79
Buy It Now
Free Shipping
Condition: New
Location: United States
Edhard F-5001 6 Qt Clear Double Spout for Donut/ Pastry Filler Unit Use this unit to fill doughnuts. Eclairs or even cream puffs. Model# F-5001, Material: ... morePolycarbonate, Includes 2 Standard Spouts, Double Spout Model, Capacity: 6 Qt, Gear type pump, Donut fillter, Height: 14" Width: 9" Length: 9" Weight: 7.5 lbs, Made in USA, Items Shipping Policy: Please include your street address. As we do not ship to PO boxes. Orders are normally shipped within 4 business days upon receipt of payment. Large equipment can take up to 4 days. On rare occasions that an item is unable to ship in the stated timeframe, you will be notified in 2 business days or less. Orders may be shipped in multiple packages. We do not ship to Alaska or Hawaii addresses, APO/FPO addresses or outside the US. Combined shipping is often available on identical items. Please click the shipping tab at the top of the item description to view any combined shipping options. To view our full Shipping Policy. Why Is Sales Tax Added To My Order? In accordance with applicable law. Wasserstrom is registered to collects tax in all states with the exception of Vermont and North Dakota. The Wasserstrom Company is required by law to charge tax for the states we are registered with Nexus. Here some cases in which a business might have a sales tax Nexus in a state: If the business has a physical location in the state, If there are resident employees working in the state, If the business has property(including intangible property) in the state, If there are employees who regularly solicit business in the state. Sales tax is applied to the total amount of the order and is based on the shipment's destination state and local sales tax rates. States that impose sales tax collection on Shipping& Handling expenses require that sales tax be applied to Shipping& Handling when the item that is being shipped is subject to sales tax. New Items Return Policy: Items still in new condition can be returned within 14 days of delivery for refund of the sale p
$
28.95
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
F-2013 Edhard Seal Genuine OEM EDHF-2013.
$
162.95
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
P-3021 Edhard Gear & Idler Model Mk Assembly Genuine OEM EDHP-3021.
$
13.95
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
F-2179 Edhard Seal-O/Ring Cover-Single -234 Genuine OEM EDHF-2179.
$
15.95
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
F-2076 Edhard O Ring Genuine OEM EDHF-2076.
$
29.95
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
F-2034 Edhard Thumb Screw Genuine OEM EDHF-2034.
$
589.99
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Edhard F-5001 6 Qt Clear Double Spout for Donut/ Pastry Filler Unit Use this unit to fill doughnuts. Eclairs or even cream puffs. Model# F-5001, Material: ... morePolycarbonate, Includes 2 Standard Spouts, Double Spout Model, Capacity: 6 Qt, Gear type pump, Donut fillter, Height: 14" Width: 9" Length: 9" Weight: 7.5 lbs, Made in USA, Items Shipping Policy: Please include your street address. As we do not ship to PO boxes. Orders are normally shipped within 4 business days upon receipt of payment. Large equipment can take up to 4 days. On rare occasions that an item is unable to ship in the stated timeframe, you will be notified in 2 business days or less. Orders may be shipped in multiple packages. We do not ship to Alaska or Hawaii addresses, APO/FPO addresses or outside the US. Combined shipping is often available on identical items. Please click the shipping tab at the top of the item description to view any combined shipping options. To view our full Shipping Policy. Why Is Sales Tax Added To My Order? In accordance with applicable law. Wasserstrom is registered to collects tax in all states with the exception of Vermont and North Dakota. The Wasserstrom Company is required by law to charge tax for the states we are registered with Nexus. Here some cases in which a business might have a sales tax Nexus in a state: If the business has a physical location in the state, If there are resident employees working in the state, If the business has property(including intangible property) in the state, If there are employees who regularly solicit business in the state. Sales tax is applied to the total amount of the order and is based on the shipment's destination state and local sales tax rates. States that impose sales tax collection on Shipping& Handling expenses require that sales tax be applied to Shipping& Handling when the item that is being shipped is subject to sales tax. New Items Return Policy: Items still in new condition can be returned within 14 days of delivery for refund of the sale p
$
133.22
Buy It Now
Free Shipping
Condition: New
Location: Addison, United States
Gear & Idler Model Mk Assembly. Use genuine OEM parts for safety reliability and performance. Gear & Idler Model Mk Assembly. Use genuine OEM parts for ... moresafety reliability and performance.
$
195.00
Buy It Now
$24.86 Shipping
Condition: New
Location: Snoqualmie, United States
Replaces Edhard Part #F-5001. Includes: Pump cover assembly & (2) Impellers. Whether you are just starting up or need to revamp your entire operation, ... morewe are the ones to call.
$
8.95
Buy It Now
Free Shipping
Condition: New
Location: Snoqualmie, United States
Spout Closure for Donut Filler Hopper. Replaces Edhard F-2265 Package Includes 12 pieces of the product seen in the picture.
$
67.28
Buy It Now
Free Shipping
Condition: New
Location: Addison, United States
Edhard F-3076 Spout This piece is Used. Edhard F-3076 Spout NEW PARTS OLD STOCK $3.99 SHIPPING USPS First Class TO CONTINENTAL USA Only Returns accepted ... morewithin 7 days of receipt only if the part is defective. It is our intent to establish many satisfied customers. Descriptions are made as accurately as possible. Our intention is not deceive anyone. We describe the positives along with the negatives. We try to give you as much information as possible and a direct link to the manufacturer if possible. Winning bidder to pay for shipping/handling and insurance charges. All shipments are sent by UPS or Common Carrier and insured if possible All shipping/handling charges are for Continental USA only. Please inquire for international shipping charges. Payment should be received no later then 7 days after contact following the close of this auction. Please resolve questions via E-mail BEFORE bidding. You are buying used or new equipment and is AS IS with no returns unless otherwise stated. I reserve the right to end auction early if item sells locally. Good Luck Bidding and Thank you For Looking Payment Options: PayPal Shipping Options: Shipping Carrier Domestic UPS Ground(1 to 6 business days) $3.99 I will ship to: USA KITCHENGUYS Winning Bidder: Click button on right to checkout now. Free Last Minute Bidding via Your Cell Phone! with eBay Market Research. Try the Vendio Platform FREE. Truly Affordable Sales Automation. Try the Vendio Platform FREE. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! On Jun-28-11 at 21:23:34 PDT. Seller added the following information: Please read the shipping terms very carefully. Any item purchased can be picked up at our warehouse in Central Falls. RI by appointment only during the hours of 10 am to 2 pm Monday To Friday. Local Pickups are subject to 7% Rhode Island Sales Tax. All shipments are sent by UPS or COMMON CARRIER. Used items shipping common carrier are not insured. Please inquire about additional Insurance. All shipping/handling charges are for CONTINENTAL
$
15.95
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
P-3423 Edhard Rubber Foot Assembly. Genuine OEM EDHP-3423.
$
16.49
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Spout Closure for Donut Filler Hopper. Replaces Edhard F-2265 Package Includes 12 pieces of the product seen in the picture.
$
45.83
Buy It Now
Free Shipping
Condition: New
Location: United States
Edhard F-3076 Timbit 30° Spout This spout comes with a 30 degree point. Model# F-3076, Material: Stainless steel, Color: Silver, 30 degree point, ... moreUse with double filler unit, Diameter: 9/32" Length: 2-1/4" Weight: 125 lb, Items Shipping Policy: Please include your street address. As we do not ship to PO boxes. Orders are normally shipped within 4 business days upon receipt of payment. Large equipment can take up to 4 days. On rare occasions that an item is unable to ship in the stated timeframe, you will be notified in 2 business days or less. Orders may be shipped in multiple packages. We do not ship to Alaska or Hawaii addresses, APO/FPO addresses or outside the US. Combined shipping is often available on identical items. Please click the shipping tab at the top of the item description to view any combined shipping options. To view our full Shipping Policy. Why Is Sales Tax Added To My Order? In accordance with applicable law. Wasserstrom is registered to collects tax in all states with the exception of Vermont and North Dakota. The Wasserstrom Company is required by law to charge tax for the states we are registered with Nexus. Here some cases in which a business might have a sales tax Nexus in a state: If the business has a physical location in the state, If there are resident employees working in the state, If the business has property(including intangible property) in the state, If there are employees who regularly solicit business in the state. Sales tax is applied to the total amount of the order and is based on the shipment's destination state and local sales tax rates. States that impose sales tax collection on Shipping& Handling expenses require that sales tax be applied to Shipping& Handling when the item that is being shipped is subject to sales tax. New Items Return Policy: Items still in new condition can be returned within 14 days of delivery for refund of the sale price without the original shipping cost. Buyer will pay shipping for items being returned due to a custome
$
19.22
Buy It Now
Free Shipping
Condition: New
Location: United States
Edhard F-2265 Spout Closures for Donut Filler- Dozen Place these closures on the end of your filler when not in use. Model# F-2265, Material: Plastic, ... moreColor: Red, Two caps, Length: 7" Weight: 085 lb, Items Shipping Policy: Please include your street address. As we do not ship to PO boxes. Orders are normally shipped within 4 business days upon receipt of payment. Large equipment can take up to 4 days. On rare occasions that an item is unable to ship in the stated timeframe, you will be notified in 2 business days or less. Orders may be shipped in multiple packages. We do not ship to Alaska or Hawaii addresses, APO/FPO addresses or outside the US. Combined shipping is often available on identical items. Please click the shipping tab at the top of the item description to view any combined shipping options. To view our full Shipping Policy. Why Is Sales Tax Added To My Order? In accordance with applicable law. Wasserstrom is registered to collects tax in all states with the exception of Vermont and North Dakota. The Wasserstrom Company is required by law to charge tax for the states we are registered with Nexus. Here some cases in which a business might have a sales tax Nexus in a state: If the business has a physical location in the state, If there are resident employees working in the state, If the business has property(including intangible property) in the state, If there are employees who regularly solicit business in the state. Sales tax is applied to the total amount of the order and is based on the shipment's destination state and local sales tax rates. States that impose sales tax collection on Shipping& Handling expenses require that sales tax be applied to Shipping& Handling when the item that is being shipped is subject to sales tax. New Items Return Policy: Items still in new condition can be returned within 14 days of delivery for refund of the sale price without the original shipping cost. Buyer will pay shipping for items being returned due to a customer order error or decision. Pleas
$
268.07
Buy It Now
Free Shipping
Condition: New
Location: United States
This stainless steel kitchen scale has a removable platform that is easily cleaned and maintained. An AC adaptor is included with the product, but 9V ... morebatteries can also provide power. A low battery indicator and automatic shut-off feature round out this products versatile and practical features.
$
17.77
Buy It Now
Free Shipping
Condition: New
Location: Sterling Heights, United States
Spout Closure for Donut Filler Hopper. Replaces Edhard F-2265 Package Includes 12 pieces of the product seen in the picture.
$
16.58
Buy It Now
Free Shipping
Condition: New
Location: Brookeville, United States
Spout Closure for Donut Filler Hopper. Replaces Edhard F-2265 Package Includes 12 pieces of the product seen in the picture.
$
16.13
Buy It Now
Free Shipping
Condition: New
Location: Lakewood, United States
Spout Closure for Donut Filler Hopper. Replaces Edhard F-2265 Package Includes 12 pieces of the product seen in the picture.
$
43.88
Buy It Now
Free Shipping
Condition: New
Location: United States
Kit includes gear, knife and screw. This makes it crucial for them to be equipped with proper food prep smallwares that let them work more efficiently. ... moreFood prep smallwares may malfunction with regular use.
$
371.24
Buy It Now
Free Shipping
Condition: New
Location: United States
This top remover allows for easy change of blade by simply pulling the pin. This lid remover is screw mounted for stable use. Nickel plated base and stainless ... moresteel for rust resistance. Quick change gear for easy maintenance.
$
155.55
Buy It Now
Free Shipping
Condition: New
Location: United States
SquareTrade © AP6.0 Edlund#2 Manual Table Style Can Opener w/ Plated Steel Base Model: 2 This table style can opener is ideal for opening cans up ... moreto 12" tall. Great for cafeteria kitchens. Old reliable' is now even more dependable. Brand new in original box.
$
78.99
Buy It Now
Free Shipping
Condition: New
Location: United States
This Edlund can opener base gets bolted down to any table for added stability. Made to fit Edlund #1 Manual Can Opener. You can find an extensive selection ... moreof can/bottle openers in our collection of food prep smallwares.
$
104.54
Buy It Now
Free Shipping
Condition: New
Location: United States
This Edlund stainless steel knife rack is designed to increase sanitation while protecting knives and preventing workplace accidents. This product's removable ... moreplastic insert is high temperature tolerate and dishwasher safe to make it easy to keep your kitchen clean.
1 2
 In 

Former Listings  
 
EDHARD Donut JELLY PUMP w/ 2 Hoppers Creme Custard Filled Pastry Doughnut Maker
Edhard Jelly Donut Filler This auction is for one Edhard jelly d onut filler with t wo hoppers and t hree sets of spouts(six spouts total- four normal and two small) This unit works nice ly. The hoppers are both in good condition. No cracks. The base works has a coupl e of repaired cracks. One on the side, and one on the rear by the power plug(see last picture) There is a small chip out of the s ticker on the number pad. Works fine and ready to use. 120v standard plug. Will be shipped via UPS. Or can be picked up. Any questions? Just ask. Bid with confidence. Email me if you have any questions. All items listed are described to the best of my ability. And are sold as-is. Items are carefully packaged and shipped. I will not be liable for damage in shipping. If you have any problems, I will try to resolve them. I expect payment within three ... moredays unless you email me and make other arrangements. Click here to see my other items for more great deals.
edhard Donut Filler Hoppers 3 Units
Used Edhard Donut Filler Hoppers 3 Units included in auction 2 have a clip missing 1 has a lid 4 filler spouts are included All in working condition 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13ea9be3931-0x103-
EDHARD DONUT FILLER EXTRA LARGE HOPPER FILLER UNIT WITH SPOUT 18 QT
EDHARD HOPPER THIS AN 18QT HOPPER FOR AN EDHARD DONUT FILLER. I T'S COMPLETE WITH GEARS. BASEPLATE, SPOUT, LID E TC. NO TE THA T THERE HAS BEEN A REPAIR MADE TO THE PART THAT HOLD S TH E SPOUT ON. THAT REPAIR IS VERY SOLID AND THE REPAIR DOESNT AFFECT ANYTHING. GUAR ANTEED IN GOOD WORKING CONDITION CALL JOE WITH ANY QUESTIONS(860) 348-5639- PAYMENT PAYMENT TERMS: Payments are due within 7 days of auction close. The winning bidder will automatically receive an invoice from PayPal. If you have any trouble using PayPal or do not receive an invoice please contact us immediately. CONNECTICUT RESIDENTS ADD 6% SALES TAX.
Edhard Jelly Pump Jelly Filler with 3 Hoppers
D'Elia Restaurant Equipment Used Edhard Jelly Pump for sale. Unit is in excellent physical and working condition. Has been inspected and tested. Comes with 3 Hoppers with the lids. Hoppers are in excellent condition with no cracks. Model: MK Serial# 25755 120 volts.53 Amps 60 Hz D'Elia Restaurant Equipment is a Family Owned Business with 25+ years experience in the restaurant equipment business. We are known for selling only the top name brands. And best used equipment around. We only buy and sell equipment that is in excellent shape, and has not been abused. Posted with
EDHARD DPF DOnut Filler Machine Base Only Needs Work
You are bidding on an Edhard DPf donut filler machine.It comes on the motor turns but the timer know is not working,selling as is as stated.winning bidder pays$20 for shipping.Happy bidding. Posted with
Edhard donuts filler unit.
E dhard 6 QT clear double spout donut filler unit.Hopper molded in clear FDA-approved polycarbonate.it can perform a wide range of dispensing functions from filling pasteries,donuts.comes with 2 spouts.
Fruit Filling Transfer Pump Mixer Bowl Production Bakery Edhard Fedco Unifiller
Used custom made Fruit Filling transfer pump for a production bakery SEE VIDEO: http:www.youtube.com/embed/iVj9mokm1YA Intended to pump product like fruit fillings from barrels. Buckets, or mixer bowls Please call 651-747-6529 Buyer pays $295 to ship dock to dock lower 48 states 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13ed174a486-0x105-
Edhard Impeller Set For Filler Unit
Edhard Impeller Set for filler unit. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
Edhard Double Spout Pump Cover Assembly
The item's condition can be seen in the pictures. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
Edhard Thumb Screw
Edhard Thumb screws to fit on the bottom of the filler units. 9.99 for one Pair) SOLD IN PAIRS! Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
Edhard Plain Eclair Spout For Double Spout Unit
Edhard plain eclair spout for double spout unit this spout fits on the double filler units to fill eclairs. 14.99 for a pair) SELLING IN PAIRS! Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
Edhard MKH Donut Filler
Used in very good cosmetic and working condition. Just this base unit only. Posted with
Edhard MKH Donut Filler NEEDLES
TWO USED REPLACEMENT NEEDLES AS PICTURED
Edhard P-4010 Base & 2 F-5001 Filler Units with Original Boxes-Super Nice! DA528
On eBay for 16 years! We are a trusted seller with 100% feedback approval& high star ratings in all categories. We are honest in our listings. We ask that you read the ad carefully. If you are not sure about an item please ask questions before bidding. To ask a question please scroll down to the bottom of the page on the left side and click on the"ask a question" link. We rarely answer questions on weekends and during holidays. We will reply first thing next business day. Thank you for looking at our items. Dan Batson, DGD Inc Edhard P-4010 Donut& Pastry Filler with 2- 6 Quart Filler Units. These are in excellent condition and were hardly used. This comes with the base. 2- 6 quart filler units with the filler needles, gears and seals. Only 1 top is included, the other one is missing(your guess is as good as mine) These come ... morein the original boxes with the owners manual. The base works great, the filler units work great too. Very little use as these were ordered, then within a month the bakery closed. They were in the box when I picked them up. There is a 2 week inspection guarantee on this lot. Check them out and if not as advertised, you can return them within 14 days. Item is sold as described. We have Fedex pickup daily, we pack and ship your item no later than the next day. The shipping will be in a large box, that will make it a little more expensive to ship, they will be well packed which will make the few extra bucks in shipping well worth the cost. Click for more information about this nice item. Buyer pays shipping. We ship via Fedex Ground. Items are insured for their purchase price. Payment due within 3 business days of auction end. Unpaid item filed with eBay after 7 days(if you contact us we can work with buyer) We accept payment and credit cards thru PayPal. If you require different payment modes please email. Damage policy: We do our best to package your item so if it is dropped or mishandled it will still arrive in working condition. We have very few claims due to our careful pack
EDHARD DONUT PASTRY FILLER MODEL MK WITH 2 HOPPERS AND LIDS IN GREAT SHAPE
EDHARD DONUT PASTRY FILLER MODEL MK WITH 2 TAN HOPPERS AND LIDS HOPPERS ARE IN GREAT SHAPE NO CRACKS IN HOPPERS OR THE BASE OF THE HOPPERS GEARS AND SEALS ARE ALL GOOD( ONE GEAR COVER DOES HAVE A CRACK BUT STILL WORKS FINE) LOOK AT PICTURE ALL HARDWARE WITH THEM BASE UNIT IS IN GREAT SHAPE. NO CRACKS OR CHIPS EVERYTHING IN THE PICTURES IS WHAT YOU WILL GET ALL IN WORKING ORDER EVERYTHING WILL NEED A CLEANING THEN THEY WILL BE READY FOR USE. SOLD AS IS ANY QUESTIONS PLEASE ASK SHIPPING WILL BE $40.00 USA ONLY THANKS. I ALSO HAVE EXTRA HOPPERS.BIDDER CAN BUY MORE AND ADD TO THE ORDER AFTER AUTION ENDS
Edhard PS-4028 Power Base 1/8HP ( Filling Machine)
Almost NEW! We use this machine couple of times only. Works very well. Works with liquid or very thick paste products like Hummus. Pick up only! Location New York Queens In this action you get 1 PS-power Base 120VAC ^0Hz 1/8HP 1 FHP-5025 Filler Unit-18Qt(17L)Single Outlet 1 FHP-3368 Disc-Pressure-Clear-18Qt Assy. For FHP Filler Units and FS-3150 1 F-3141 Extension-Universal 6-1/4" Assembly 1 Fs 2760 Orifice-47"12mm)Dia. 1P-3026 Switch-Foot Assembly w/4 Connector(P-2889) 1 DVD and complete guide to Edhard equipment On Jul-06-13 at 03:59:27 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
Edhard Pastry/Donut Jelly & Cream Filler with 5 Hoppers & Extra Parts.
Up for auction is an Edhard Pastry/Donut Jelly& Cream Filler with 5 Hoppers& Extra Part. Items Inlcuded. One(1) Edhard Pastry/Donut Filler Base Unit. Model MK. 115 VAC, 60HZ, 1 Amp. Five(5) 6 Quart Hoppers with Lids. Gears, and all spouts. Three(3) Cream Color. And Two(2) Clear Hoppers. One(1) Extra 6 Quart Lid. Cream Color. Two(2) Spare Spouts. Four(4) Spare Gear Bolts. One(1) Spare Gear. One(1) Spare Gear Box Cover. THERE ARE SOME CRACKS. CHIPS, AND SCRATCHES ON THE HOPPERS AND THE POWER BASE. PLEASE SEE THE PICTURES. THE KEYPAD ON THE POWER BASE IS PARTIALY NOT WORKING. THE 3. 6, AND 9 KEYS DO NOT WORK. THE OTHER KEYS WORK FINE. I THINK IT NEEDS THE KEYPAD REPLACED. Pictures are of the actual items. Sold as-is. No warranty. If you have any questions. Do not hesitate to contact me. These items will most likely ship in multiple boxes. ... moreShips to the Continental U.S. ONLY. Immediate payment via paypal is required. Bidders with 0 feedback or who are new users. Will have bids cancelled, if you do not contact me prior to bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE! EDHARD MK ELECTRIC DONUT FILLER w/ 2 HOPPERS JELLY PUMP
EDHARD MK DONUT FILLER w/ 2 HOPPER S THIS IS IN VERY GOOD USED CONDITION WITH ONL Y MINOR COSMETIC WEAR. THE BASE IS VERY CLEAN WITH NO CRACKS IN THE PL ASTIC. JUST A FEW LIGHT SCRATCHES ON THE BACK. BETWEEN MY FINGERS IN THE PICTURES) THESE ARE NEWER HOPPERS AND THEY'RE ALSO IN GREAT SHAPE. THEY'RE COMPLETE WITH LIDS AND ALL OF THE INNER WORKINGS. ONE OF THE LIDS HAS SOME SCRATCHES ON IT. ONLY ONE SET OF THE STAINLESS FILLER TUBES ARE INCLUDED. GUARANTEED IN GOOD WORKING CONDITION READY TO GOT TO WORK! CALL JOE WITH ANY QUESTIONS OR TO INQUIRE ABOUT DISCOUNTS(860) 348-5639 INFO OFF THE WEB: Spike the donuts on the filler tubes. And hit the bar on the front. This unit accurately fills the donuts. It's digital. So you can quickly set it for just the right amount. These are the standard units in the industry, reliable and easy to ... moreuse. 100% SATISFACTION GUARANTEED! PAYMENT PAYMENT TERMS: Payments are due within 7 days of auction close. The winning bidder will automatically receive an invoice from PayPal. If you have any trouble using PayPal or do not receive an invoice please contact us immediately. CONNECTICUT RESIDENTS ADD 6% SALES TAX.
*USED* EDHARD P-4010 / MK - JELLY PUMP / DONUT FILLER W/ 4 HOPPERS - 2010 MODEL
USED* EDHARD DONUT FILLER/ JELLY PUMP W/ 4 EXTRA HOPPERS M ODEL# P-4010/ MK- 2010 MODEL! NEW THIS ITEM COSTS MUCH. MUCH MORE! SAVE BIG $$$$$ NOW! THIS ITEM WAS REMOVED FROM A WORKING ENVIRONMENT AND PLACED IN OUR WAREHOUSE. IT HAS BEEN TESTED AND IS WORKING; CLEANED AND IS SPOTLESS. WHAT YOU SEE IS WHAT YOU GET. AND THIS ITEM IS BEING SOLD AS-IS WITH NO WARRANTY OR GUARANTEE. THIS COMES WITH 4 EXTRA HOPPERS, BUT ONLY TWO HAVE LIDS DIMENSIONS(approx. 16" X 12" X 18" W/ HOPPER ATTACHED. ELECTRICAL REQUIREMENTS: 120 VOLT- 1 PHASE- 60 Hz- 53 AMPS- 20 WATT. SHIPPING& HANDLING DETAILS: We do not charge extra for packing/ palletizing. It will be shipped via FedEx Ground. If the item is damaged when it is delivered DO NOT accept the delivery. No International Shipping; Domestic United States Only. Local pick up is acceptable with ... moreno fee. PAYMENT DETAILS& TERMS: We accept Paypal. Check, All Credit/ Debit Cards, Cash. Sales tax applies for local pick ups or if the item is shipped to a Georgia, United States address. Please pay with in 1-Day after the item is purchased, otherwise we have the right to cancel your bid/ offer. All used equipment is sold AS-IS and without warranty. If you have questions do not hesitate to ask. We are a business and only operate on weekdays. All items listed on eBay are always available for purchase in person in our warehouse. RETURNS: We do our best to make sure that we represent the items we sell accurately. We only issue refunds if our description was not accurate and within 30 days of purchase. The buyer must contact us within 2 days of the delivery if there is a problem. We accept returns within 30 days of the purchase. There is a 10% restocking fee for all returns. The buyer is responsible for all return shipping charges. o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13fd44f1a33-0xf6-
EDHARD CLEAR 6QT DONUT PASTRY JELLY FILLER HOPPER w LID & STAINLESS STEEL SPOUTS
Hello and thank you for your interest in one of our auctions. We are in the business of assisting companies and estate family members liquidate all or part of the assets in their estate. We will do our best to truthfully and accurately describe all items. We guarantee the item you received to be as described and pictured. If you place a bid on an item and win. We will make every effort to see that your purchase is a positive experience. But remember, this is an auction, if you are the winning bidder the item is yours. So please, take the time to thoroughly read the entire ad, look at all the pictures, and ask any questions BEFORE you place a bid. Thank you” This Business Liquidation Auction is for an EDHARD CLEAR 6QT DOUBLE SPOUT DONUT JELLY FILLER HOPPER with LID& DOUBLE STAINLESS STEEL SPOUTS. This auction is for an EDHARD CLEAR 6QT ... moreDOUBLE SPOUT DONUT JELLY FILLER HOPPER. This is a used item in very nice condition. Removed from a working bakery/donut shop. A long with a few light surface abrasions and a few dings. There is a long crack on the side of the hopper that was repaired, see pictures) We completely filled the unit with water and No Leaks Were Detected. You are bidding the hopper. Lid, and two stainless steel spouts, as pictured below) the gears are NOT included. This would be a great back-up, replacement, or addition to your existing set-up. This is a NO RESERVE AUCTION so good luck. Happy bidding and thank you. P. S. Please be sure to check our other auctions for more great finds! The following pictures are of the actual item you are bidding on. We respectfully ask that you complete your purchase within 72 hours of your winning bid• Please ask any questions prior to placing your bid• We reserve the right to cancel bids based on buyer’s feedback history• We reserve the right to end an auction early if the item is no longer available• Sorry. Due to our low prices, We Do Not Offer Combined Shipping• Items will be shipped UPS. USPS, or FedEx at our discretion• We will only ship to
Edhard donut filler model MKH Outstanding Condition
Unit with built-in power cord only. Outstanding physical and working order. Only area not in outstanding cosmetics is the bottom of unit. Which is in good cosmetics. Shipping to any of the lower 48 states only please. Tracking w/ signature. Thanks for looking!
Edhard Power Base for Jelly Filler P-4010 With (4) 6 Quart Filler Units
Edhard Power Base for Jelly Filler Model# P-4010 Four different cycles Digital keypad Manual trigger switch Volts: 120 1/37 Hp Height: 6-3/4" Width: 15" Depth: 9" Weight: 17 lbs INCLUDED ARE 4– 6 QUART Edhard F-Series Filler Units Hopper molded in clear FDA-approved polycarbonate.Can perform a wide range of dispensing functions from filling pastries to depositing one product onto another. A large variety of specialized spouts(sold separately) adapt the filler unit to fill donuts eclairs croissants and other pastries. Dispenses smooth batters and layer toppings deposits butter and cream cheese onto bagels and rolls and doses other semi-liquid products quickly and efficiently. We do not ship to residential address. Please feel free to call us at 704-258-1365 or email us with any questions you may have at. We Will NOT Be Responsible ... moreFor Freight Damages After Merchandise Leaves Our Warehouse. Item(s) Should Be Inspected At Time Of Delivery. For Any Damages That May(although rare) Have Occurred During Shipping. Driver Should Be Made Aware Of Damages Before Leaving Your Location. Bill Of Lading Should Be Noted and Signed(all copies) By You and The Driver. Freight Claim Should Then Be Filed Promptly. SPECIAL NOTE REGARDING REFRIGERATION EQUIPMENT: Because the solder holding refrigeration lines together becomes brittle as it ages. Vibrations during shipping could cause it to crack and could lead to a refrigerant leak. Occasionally an item we described as cooling may no longer cool after shipping. The buyer's cost to repair and recharge the system should be less than $100.00.
Edhard VDS Complete Set-Used Twice
This unit has only been used TWICE. It was purchased directly from manufacturer as a complete unit for over $6000. See the manufacturer's videos. For Donut filling: Chocolate molding: The unit includes the following: Power Base PV-400(162 RPM Max- 120V 50/60Hz 1/4HP) Pump-Lobe with 1.5" Gasket and 1.5" Clamp SS Double Manifold(for chocolate) 4"Spacing Hopper- 18Qt. Adaptor-Clamp Fitting to 7/8" Dia Extention-Universal 6-1/4" L Orifiice- 56" 14mm Dia)+.47" Dia(12mm Dia) Switch- Foot pedal The unit includes all the above and all its Operating manuals. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-141838fdb0d-0x102-
used Parts for Edhard Donut Hopper (gears, spouts, screws)
Used parts for Edhard donut hoppers. Includes what you see in the pictures. The gears probably should be washed again(I washed them in hot soapy water but they feel greasy. And there is some discoloration) and the screws will need to be recleaned. Will be shipped Priority mail.
Edhard VDS Complete Power Base Setup
This unit is in good cond ition. Fully functional. It was purchased directly from manufacturer as a complete unit for over $7000. Includes everything you see. There is a video demonstration of the actual unit as well as some informative videos from the manufacture. Power Base PV-400(162 RPM Max- 120V 50/60Hz 1/4HP) 18Qt Hopper- RS- Series Filler Unit( nitrate-coated three-lobe impellers. This pump can dispense viscous products. Containing particles up to 3/8" 10mm) diameter. The RP pump can dispense delicate products, which can not be"overworked" while being pumped. 2 Sets of three-lobe impellers(one is solid stainless. One is Coated) All Necessary Gaskets and o-rings- Power Cord- Table Mounted Switch- Factory Documentation( Manual and parts list) I have more parts for sale separately) Video of unit being tested See the manufacturer's ... morevideos. For Donut filling: Chocolate molding: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-141f4421bf6-0xf5-
EDHARD ELECTRIC DONUT FILLER w/ 1 HOPPER JELLY PUMP
EDHARD DONUT FILLER THIS CAME FROM A BAKERY THAT RECENTLY CLOSED DOWN. THIS IS THE OLDER STYLE FILLER WITH JUST THE ONE BUTTON ON THE FRONT. PRESSING THE BUTTON INCREASES THE AMOUNT OF FILLING INJECTED. THE DIGITAL DISPLAY SHOWS HOW MUCH IS BEING DISPENSED. NOTICE IN THE PICTURES THAT THERES A SMALL HOLE ONTHE PLASTIC ON ONE OF THE FRONT CORNERS AND A HAIRLINE CRACK IN THE PLASTIC ON THE BACK. THEY DONT AFFECT THE OPERATION AT ALL. THE HOPPER IS COMPLETE AND IN GOOD CONDITION GUARANTEED IN GOOD WORKING CONDITION CALL JOE WITH ANY QUESTIONS(860) 348-5639 INFO OFF THE WEB: Spike the donuts on the filler tubes. And hit the bar on the front. This unit accurately fills the donuts. It's digital. So you can quickly set it for just the right amount. These are the standard units in the industry, reliable and easy to use. 100% SATISFACTION GUARANTEED! ... morePAYMENT PAYMENT TERMS: Payments are due within 7 days of auction close. The winning bidder will automatically receive an invoice from PayPal. If you have any trouble using PayPal or do not receive an invoice please contact us immediately. CONNECTICUT RESIDENTS ADD 6% SALES TAX.
DAWN MODEL IV ELECTRIC DONUT FILLER w/ 1 HOPPER JELLY PUMP similar to edhard
DAWN MODEL IV DONUT FILLER THIS CAME FROM A BAKERY THAT RECENTLY CLOSED DOWN. THE FILLER IS IN GOOD CONDITION WITH SOME COSMETIC WEAR. THERE'S SOEM SCRAPES AND SCRATCHES AS WELL AS AN AREA OF PAINT LOSS ON THE BASE(BETWEEN MY FINGERS IN THE PICTURES) LITTLE BIT OF BLACK TAPE ON THE CORD. OTHERWISE ITS A CLEAN AND WELL MAINTAINED MACHINE THAT WORKS GREAT. IT WILL COME WITH THE(1) COMPLETE FILLER UNIT(HOPPER) SHOWN GUARANTEED IN GOOD WORKING CONDITION CALL JOE WITH ANY QUESTIONS(860) 348-5639 INFO OFF THE WEB: Spike the donuts on the filler tubes. And hit the bar on the side. This unit accurately fills the donuts. It's digital. So you can quickly set it for just the right amount. These are the standard units in the industry, reliable and easy to use. 100% SATISFACTION GUARANTEED! PAYMENT PAYMENT TERMS: Payments are due within 7 days ... moreof auction close. The winning bidder will automatically receive an invoice from PayPal. If you have any trouble using PayPal or do not receive an invoice please contact us immediately. CONNECTICUT RESIDENTS ADD 6% SALES TAX.
Edhard F-5003 Single Spout 6 qt Clear Filling Unit w/o hardware
This unit was used for 2 months and given constant. Required maintenance. In perfect condition, product no longer fit needs.
EDHARD MK DONUT FILLER / JELLY DEPOSITOR -- TESTED -- NO RESERVE
This unit is in good condition. Works Well. Plastic Lever in the front of unit is on and works but. Were the pin is located on unit it was cracked and hot glued to stay on unit. Also Cord is frayed but no broken wires works well. Used many years like this never has a problem. Can also be used without handle by manually pushing switch. Please refer to all of the pictures and willing to answer any questions necessary. Any parts needed for unit can be purchased for the unit at 3 wire website. Also comes with 3 Hoppers, 2 with lids, 1 without and spouts for all hoppers plus extras.
EDHARD Model MK Donut Pastry Filler Machine with 2 Hoppers
Edhard model MK donut filler machine in good working order. However previous owners were not very clean so there are mineral deposits on the hoppers, and built up mineral deposits on the machine. I have cleaned everything with hot soapy water, but the mineral deposits remain. Electric 120/60/1. Serial number 34708. Comes with two hoppers. Hoppers include gears, lids and spouts. Look at ALL the pictures to see exactly what you are getting. Will be shipped UPS ground in 2 boxes, or buyer may pick up in Milwaukee, WI. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-144be9151c6-0x10c-
#2 HOPPER with Lid Spouts Gears for Edhard Donut Filler Machine MK
Used Edhard hopper with lid. 2 sets of spouts and gears. Will be shipped UPS ground or buyer may pick up in Milwaukee.
BIGGER MOTOR Edhard Jelly Donut Filler Depositor MKS with new hopper
You are bidding on this used Edhard Donut Filler Model MKS Has a bigger. More powerful motor than the base model Edhard fillers Base weighs 21 lbs. Compared to the basic model which weighs 13 lbs Pulls 6.5 amps. Compared to 1.5 amps More powerful machine PLEASE CALL 651-747-6529 You have your choice of the 18 quart hopper pictured or a brand new 6 qt hopper Has a couple cracks in the plastic base cover. But does not affect operation Buyer pays $55 to ship UPS Ground lowr 48 states No International Ship
Edhard filler unit 6qt
1 great working filler unit all parts included. Includes the 2 spouts as well. Buy from a 100% perfect seller. Edhard Filler Unit. 6 Quart Edhard F-Series Filler Unit Model F5001: 6 Quart DoubleOutlet 9" Diameter x 15" High. Hopper molded in clear FDA-approved polycarbonate.Can perform a wide range of dispensing functions from filling pastries to depositing one product onto another. A large variety of specialized spouts(sold separately) adapt the filler unit to fill donuts clairs croissants and other pastries. Dispenses smooth batters and layer toppings deposits butter and cream cheese onto bagels and rolls and doses other semi-liquid products quickly and efficiently. F-Series filler units(includingF5001) can be used with P PS and PV-Series Power Bases(including P4010) 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14530fd14c7-0x113-
Edhard MK Donut / Pastry Filler Power Base & F5001 Hopper
click images and expand window for a larger view. Edhard MK Donut/ Pastry Filler Power Base& F5001 Hopper Up for auction is a Edhard MK Donut/ Pastry Filler Power Base& F5001 Hopper. Both power base and hopper are in excellent condition. Come 100% complete and ready to be put into use. The P-Series power base is reliable and durable. Engineered for years of maintenance-free service. These bases have a number of features that make them useful in a wide variety of applications. These bases are maintenance free. The exterior is designed so that only a damp cloth is needed to keep it clean. Advanced capabilities: Normal cycling•Reverse•Automatic cycling•Continuous dispensing•Resolution adjustment Used with filler units: F-Series We are always happy to combine shipping on multiple purchases. Check out our other items! W e accept PayPal. ... moreConcealed cash sent at your own risk or cash on local pick-up. Canadian buyers will be charged applicable HST or GST on the final sale price of the item + shipping. US& INTERNATIONAL buyers will not be taxed by us. However please note that customs import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We ship worldwide using the best rate from either Canada Post. FedEx Ground, or UPS Ground. Full insurance coverage is included in the shipping rates provided below. We always quote the best price, but faster services are available upon request- just email us for a quote. For buyers located in the Toronto area. Free local pick-up is available at our eBay drop-off store located at 198A Sammon Ave. in East York, Toronto. Please email us ahead of time to notify us of a pick-up so we can send you an appropriate in
LOT OF (3) EDHARD DONUT FILLER HOPPERS FILLER UNITS jelly pump
EDHARD DONUT FILLERS ALL 3 OF THESE HOPPERS HAVE SOME ISSUES SO READ CAREFULLY AND TAKE A GOOD LOOK AT THE PICTURES. THESE ARE GENUINE EDHARD HOPPERS WITH SOME TYPICAL LIGHT SCRATCHES AND SCRAPES. THERE IS ONLY(1) LID INCLUDED O NLY ONE OF THE HOPPERS HAS THE INNER GEARS AND BASEPLATE. THAT BASEPLATE ALSO HAS SOME HAIRLINE CRACKS IN IT(SEE PICS) THAT BASEPLATE DOESNT SEEM TO LEAK BUT IT MAY NEED TO BE REPLACED SOON. 1) SET OF FILLER SPOUTS(1) LID(1) PLATE WITH GEARS CALL JOE WITH ANY QUESTIONS(860) 348-5639- PAYMENT PAYMENT TERMS: Payments are due within 7 days of auction close. The winning bidder will automatically receive an invoice from PayPal. If you have any trouble using PayPal or do not receive an invoice please contact us immediately. CONNECTICUT RESIDENTS ADD 6% SALES TAX.
EDHARD PS-4028 Base Unit plus FHP-5025 18-QT Filler Hopper in Great Condition
EDHARD PS-4028 Food Dispensing System plus 18-QT Filler Hopper A great must have for bakeries. Restaurants, or packaged food producers. Used but clean and in great working condition. Near Mint. This unit has been in use for a short period of time only. Power base unit PS-4028 1/8 HP motor Maintenance free Normal cycling Reverse Automatic cycling Continuous dispensing Resolution adjustment Also Included: One 18-Qt Polycarbonate Filler Unit(FHP-5025) One 6 1/4" extension assembly(F3141) One Orifice* FREE SHIPPING*
Pump Cover Assembly, Edhard + Gears, Bolts and Tips Good Condition
This is for some used Edhard donut filling parts. They include the pump cover assy with bolts. Impeller's and two stainless tips. They are all in real good condition. Payment thru PayPal or cash on pick up. Shipping is a flat $12.00.
Edhard Cake Turntable Decorating Variable speed Model CT
This thing is so cool I hate to sell it I have never seen one before It is in very good used condition Edhard Model CT cake turntable 1 phase. 115 volt Will spin in either direction with variable speed Please call 651-747-6529 Buyer pays $30 to ship lower 48 states. No International ship
EDHARD MK JELLY/DONUT POWER FILLER BASE WITH HOPPER WORKS EXCELLENT!
Up for auction is a Edhard Power Base model MK. This is in very fine running order and this also comes with 1 Hopper as seen in the pics. This is missing the bar in front they always break, you can just push the button. This has been tested and is ready to go. The Base and hopper might need a quick clean before using. Thanks for Looking! I only Ship to the Continental US!
Edhard Stainless Steel Filler Unit 18 qt. (17 l) W/ PowerBase
Edhard Stainless Steel Filler Unit 18 qt. 17 l) W/ PowerBase Same day shipping! RP-Series filler units feature the same stainless steel construction as the FS-Series. However. Their distinguishing characteristic is the nitrate-coated three-lobe impellers. This pump can dispense viscous products, containing particles up to 3/8" 10mm) diameter. The RP pump can dispense delicate products, which can not be"overworked" while being pumped. These units are only available in a single outlet configuration and accept most spouts and accessories. The RP-Series must be used with the PS or PV-Series Power Bases. Hoppers were only used for two years and put in storage for the last five years. In great. Clean condition! Extra/Spare Parts included(Half of what is pictured goes with each unit) SPECIFICATIONS. Filler Unit Capa: 18qt(17 l) International ... moreBuyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Discount Bakery Equipment is a full service bakery equipment provider. We are more than just an equipment vendor. We are also a full service bakery design consulting firm. Whether you are just starting up or need to revamp your entire operation. We are the ones to call. We collectively have over 75 years of experience designing bakery layouts as well as servicing and selling the equipment you need to be successful! We stand behind all of our products and services 100% Located In Michigan. We offer Full Service and Delivery in the Great Lakes area. Discount Bakery Equipment Men of Integrity 1-877-331-BAKE. Mon-Fri 8am to 4pm Est.
Edhard F-3076 Munchkin Filler Spout
Edhard F-3076 Spout This piece is Used. Edhard F-3076 Spout NEW PARTS OLD STOCK $3.99 SHIPPING USPS First Class TO CONTINENTAL USA Only Returns accepted within 7 days of receipt only if the part is defective. It is our intent to establish many satisfied customers. Descriptions are made as accurately as possible. Our intention is not deceive anyone. We describe the positives along with the negatives. We try to give you as much information as possible and a direct link to the manufacturer if possible. Winning bidder to pay for shipping/handling and insurance charges. All shipments are sent by UPS or Common Carrier and insured if possible All shipping/handling charges are for Continental USA only. Please inquire for international shipping charges. Payment should be received no later then 7 days after contact following the close of this auction. ... morePlease resolve questions via E-mail BEFORE bidding. You are buying used or new equipment and is AS IS with no returns unless otherwise stated. I reserve the right to end auction early if item sells locally. Good Luck Bidding and Thank you For Looking Payment Options: PayPal Shipping Options: Shipping Carrier Domestic UPS Ground(1 to 6 business days) $3.99 I will ship to: USA KITCHENGUYS Winning Bidder: Click button on right to checkout now. Free Last Minute Bidding via Your Cell Phone! with eBay Market Research. Try the Vendio Platform FREE. Truly Affordable Sales Automation. Try the Vendio Platform FREE. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! On Jun-28-11 at 21:23:34 PDT. Seller added the following information: Please read the shipping terms very carefully. Any item purchased can be picked up at our warehouse in Central Falls. RI by appointment only during the hours of 10 am to 2 pm Monday To Friday. Local Pickups are subject to 7% Rhode Island Sales Tax. All shipments are sent by UPS or COMMON CARRIER. Used items shipping common carrier are not insured. Please inquire about additional Insurance. All shipping/handling charges are for CONTINENTAL
Edhard F-3014 spout
Edhard F-3014 Spout This piece is Used. Edhard F-3014 Spout NEW PARTS OLD STOCK $3.99 SHIPPING USPS First Class TO CONTINENTAL USA Only Returns accepted within 7 days of receipt only if the part is defective. It is our intent to establish many satisfied customers. Descriptions are made as accurately as possible. Our intention is not deceive anyone. We describe the positives along with the negatives. We try to give you as much information as possible and a direct link to the manufacturer if possible. Winning bidder to pay for shipping/handling and insurance charges. All shipments are sent by UPS or Common Carrier and insured if possible All shipping/handling charges are for Continental USA only. Please inquire for international shipping charges. Payment should be received no later then 7 days after contact following the close of this auction. ... morePlease resolve questions via E-mail BEFORE bidding. You are buying used or new equipment and is AS IS with no returns unless otherwise stated. I reserve the right to end auction early if item sells locally. Good Luck Bidding and Thank you For Looking Payment Options: PayPal Shipping Options: Shipping Carrier Domestic UPS Ground(1 to 6 business days) $3.99 I will ship to: USA KITCHENGUYS Winning Bidder: Click button on right to checkout now. Free Last Minute Bidding via Your Cell Phone! with eBay Market Research. Try the Vendio Platform FREE. Truly Affordable Sales Automation. Try the Vendio Platform FREE. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! On Jun-28-11 at 21:23:34 PDT. Seller added the following information: Please read the shipping terms very carefully. Any item purchased can be picked up at our warehouse in Central Falls. RI by appointment only during the hours of 10 am to 2 pm Monday To Friday. Local Pickups are subject to 7% Rhode Island Sales Tax. All shipments are sent by UPS or COMMON CARRIER. Used items shipping common carrier are not insured. Please inquire about additional Insurance. All shipping/handling charges are for CONTINENTAL
EDHARD DONUT FILLER HOPPER FILLER UNIT jelly pump
EDHARD DONUT FILLER TAKE A CLOSE LOOK AT THE PICTURES THIS IS ONE HOPPER INSIDE ANOTHER. PROBABLY DONE TO ADD TO THE VOLUME OF THE HOPPER. YOU'LL RECEIVE ONLY WHAT IS SHOWN NO LID NO FILLER TUBES NO INNER GEARS ETC. PAYMENT PAYMENT TERMS: Payments are due within 7 days of auction close. The winning bidder will automatically receive an invoice from PayPal. If you have any trouble using PayPal or do not receive an invoice please contact us immediately. CONNECTICUT RESIDENTS ADD 6% SALES TAX.
" EDHARD " H.D.COMMERCIAL ELECTRIC COUNTER TOP DONUTS JELLY FILLER MACHINE
You are bidding on a used condition" EDHARD" H.D.COMMERCIAL ELECTRIC COUNTER TOP DONUTS JELLY FILLER MACHINE MAKE: EDHARD CORPORATION MODEL# DPF S/N: 1037 120V. 1Phase, 60Hz. APPROXIMATE DIMENSIONS: 6¾"H x 14½"W x 9¼"D(OVERALL MACHINE ONLY) 10"T x 8 5/8"DIAMETER(ACRYLIC HOPPER) MACHINE IS TESTED AND IN GOOD WORKING CONDITION. THE PHYSICAL CONDITION. AND ALL ACCESSORIES INCLUDED WITH THIS ITEM, IS AS REPRESENTED IN THESE PHOTOS, SELLING AS SHOWN. FOR DELIVERY TO OTHER THAN THE 48 CONTINENTAL STATES– SUCH AS HAWAII. ALASKA OR PUERTO RICO) BUYERS WILL BE SUBJECTED TO A HIGHER SHIPPING RATE* ID: 15-0238M LOC. UP2/ UP3 Welcome to“Bargains“R” Ours Food Equipment” where you can get Restaurant and Food Service equipment at a bargain! Our 35.000 sq. ft. warehouse, with over 4000 items, is located in ... moreBattle Creek, Michigan. We are one of the largest used restaurant equipment re-seller in South West Michigan specializing in Restaurant; Bakery; Pizza; Ice Cream Shop; Grocery Store; Deli; and Supermarket equipment. We work closely with Repossessing Companies and Banks, so we are able to get these equipment at low prices which we are able to pass on the saving to you. Why buy new? Save BIG $$$$ here! Thank you for visiting our store, and may you all have The Happy Life. We ship to your PAYPAL shipping address. UNLESS you contact us and tell us otherwise. Please call(269)963-3333 for more information and faster service. If no answer, you may call(616)638-2465. Also click this link http:stores.ebay.com/BARGAINS-R-OURS to save big $$$$$ for restaurant equipment. Indoor, outdoor lightings, household goods, tools and much more! For our store inventory. Please visit our“pro-store” www.Bargainsfoodequipment.com and save money here! Thank you very much for visiting our store. Bargains-R-Ours offers the following Policies: PAYMENT OF ITEMS We accept PayPal and other payment methods. Please call us for specifics. Payment must be made within 5 days of winning bids. Or acceptance of your o
Edhard Stainless Steel Depositor 18 qt. (17 l) W/ PowerBase
Edhard Stainless Steel Depositor 18 qt. 17 l) W/ PowerBase Same day shipping! RP-Series filler units feature the same stainless steel construction as the FS-Series. However. Their distinguishing characteristic is the nitrate-coated three-lobe impellers. This pump can dispense viscous products, containing particles up to 3/8" 10mm) diameter. The RP pump can dispense delicate products, which can not be"overworked" while being pumped. These units are only available in a single outlet configuration and accept most spouts and accessories. The RP-Series must be used with the PS or PV-Series Power Bases. Hoppers were only used for two years and put in storage for the last five years. In great. Clean condition! Extra/Spare Parts included(Half of what is pictured goes with each unit) SPECIFICATIONS. Filler Unit Capa: 18qt(17 l) International ... moreBuyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Discount Bakery Equipment is a full service bakery equipment provider. We are more than just an equipment vendor. We are also a full service bakery design consulting firm. Whether you are just starting up or need to revamp your entire operation. We are the ones to call. We collectively have over 75 years of experience designing bakery layouts as well as servicing and selling the equipment you need to be successful! We stand behind all of our products and services 100% Located In Michigan. We offer Full Service and Delivery in the Great Lakes area. Discount Bakery Equipment Men of Integrity 1-877-331-BAKE. Mon-Fri 8am to 4pm Est.
EDHARD MODEL M ELECTRIC DONUT FILLER w/ 3 HOPPERS JELLY PUMP pastry
EDHARD MODEL M DONUT FILLER THIS CAME FROM A BAKERY THAT RECENTLY CLOSED DOWN. THE FILLER IS IN GOOD USED CONDITION WITH SOME COSMETIC WEAR. THE BASE HAS A COUPLE OF HAIRLINE CRACKS IN THE PLASTIC IN THE BACK. THE CRACKS DONT AFFECT ANYTHING. SEE PICS) ALSO THE PIN THAT HOLDS THE ACTIVATION ARM ON IS MISSING. IT'S BEEN REPLACED HERE WITH A SMALL ALLEN WRENCH AND IT WORKS WELL. THE HOPPERS ARE IN GOOD WORKING CONDITION. ONLY(2) SETS OF THE STAINLESS FILLER TUBES ARE INCLUDED. OTHERWISE THE HOPPERS ARE 100% COMPLETE. IN THE PICTURES YOU CAN SEE BETWEEN MY FINGERS THAT ONE OF THE BASEPLATES HAS A COUPLE OF CRACKS. IT WILL NEED TO BE REPLACED. GUARANTEED IN GOOD WORKING CONDITION CALL JOE WITH ANY QUESTIONS(860) 348-5639 INFO OFF THE WEB: Spike the donuts on the filler tubes. And hit the bar on the front. This unit accurately fills the donuts. ... moreIt's digital. So you can quickly set it for just the right amount. These are the standard units in the industry, reliable and easy to use. 100% SATISFACTION GUARANTEED! PAYMENT PAYMENT TERMS: Payments are due within 7 days of auction close. The winning bidder will automatically receive an invoice from PayPal. If you have any trouble using PayPal or do not receive an invoice please contact us immediately. CONNECTICUT RESIDENTS ADD 6% SALES TAX.
Edhard Donut Filler with six canisters
Excellent condition. Save yourself time with this electric Edhard donut filling system. Well taken care of. Five years old. Six cylinders to hold six different fillings. Cylinders alone new sell for around $300 each. We just retired. This item is a bargain and a must have for donut makers!
Edhard MK Donut Filler w/8 Edhard Hoppers and Spouts
Edhard MK Filler with 8 Edhard Hoppers and Spouts. Please contact me with any questions. We used to make the donuts with these. Covers on the hoppers. Spouts and a well working Edhard! Lets start making the pastries. Ask for a shipping quote. Will come in 2 boxes. Paul. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-146f8fc39b2-0x10a-
Edhard Hopper With Spouts For Filling Donuts And Pastries
1 Edhard Hopper for filling donuts and baked pastries. Many more available! Edhard. I have 1 Dawn filler left. Please contact me if your interested $700! Used to fill the donuts! Accepting offers. Fits nicely on the Edhard Filler Unit. Includes spouts.
Edhard MK Donut Filler w/9 Edhard Hoppers and Spouts
Edhard MK Donut Filler w/9 Edhard Hoppers and Spouts Hoppers in excellent condition Comes with spouts Last mk unit and 1 hopper sold for $875 on ebay. Get a total of 9 hoppers with the unit Buyer pays all shipping and handling. Shipping and handling estimate range 130-170. I accept offers. Questions please email me.
Edhard MK Donut Filler w/6 Edhard Hoppers and Spouts
Edhard MK Donut Filler w/6 Edhard Hoppers and Spouts Hoppers in excellent condition Comes with spouts Get a total of 6 hoppers with the unit Buyer pays all shipping and handling. This listing is not accurate with shipping so please wait until I invoice you! Seller will invoice Buyer! Please do not pay right away or expect an invoice through paypal for actual shipping and handling. I will invoice you when packaging is complete! Questions please email me.
Edhard cream filler long John with 2 hoppers
You Are Bidding On USED Edhard machine with 2 hoppers. These are used and in working condition. Normal wear and tear shows on these items but they do work fine. Returns accepted for these within 7 days upon receiving the item. Shipping fees are non refundable. These are shipped wi th insurance and signature confirmation. Flat rate of $69.99 for shipping of these to lower 48 states
Edhard MK Donut Filler w/5 Edhard Hoppers and Spouts
Edhard MK Donut Filler w/ 5 Edhard Hoppers and Spouts Comes with spouts Get a total of 5 hoppers with the unit Buyer pays all shipping and handling. This listing is not accurate with shipping so please wait until I invoice you! Seller will invoice Buyer! Please do not pay right away or expect an invoice through paypal for actual shipping and handling. I will invoice you when packaging is complete! Questions please email me.
Edhard MK Donut Filler w/4 Edhard Hoppers and Spouts
Edhard MK Donut Filler w/ 4 Edhard Hoppers and Spouts Comes with spouts Get a total of 4 Edhard hoppers with the unit Buyer pays all shipping and handling. Expect 1 box. Professionally bubble wrapped with care! Will be fully inspected before shipment. Please analyze my pics. Do not offer or buy it now if your not a serious buyer. I take pride in my pictures and expect you to know what you are buying! Questions please email me. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1472d945ad7-0x118-
Edhard Digital 120 Volt Power Base for Donut Filler with hopper donut injector
Edhard Digital 120 Volt Power Base for Donut/ Pastry/ Cupcake Filler injector with hopper. Comes with 1 hopper. Buy it now. you get 1 extra hopper
Edhard F-3011 Spout for Eclairs
Edhard F-3011 Spout for Eclairs This piece is Used. Edhard F-3011 Spout NEW PARTS OLD STOCK $3.99 SHIPPING USPS First Class TO CONTINENTAL USA Only Returns accepted within 7 days of receipt only if the part is defective. It is our intent to establish many satisfied customers. Descriptions are made as accurately as possible. Our intention is not deceive anyone. We describe the positives along with the negatives. We try to give you as much information as possible and a direct link to the manufacturer if possible. Winning bidder to pay for shipping/handling and insurance charges. All shipments are sent by UPS or Common Carrier and insured if possible All shipping/handling charges are for Continental USA only. Please inquire for international shipping charges. Payment should be received no later then 7 days after contact following the close of ... morethis auction. Please resolve questions via E-mail BEFORE bidding. You are buying used or new equipment and is AS IS with no returns unless otherwise stated. I reserve the right to end auction early if item sells locally. Good Luck Bidding and Thank you For Looking Payment Options: PayPal Shipping Options: Shipping Carrier Domestic UPS Ground(1 to 6 business days) $3.99 I will ship to: USA KITCHENGUYS Winning Bidder: Click button on right to checkout now. Free Last Minute Bidding via Your Cell Phone! with eBay Market Research. Try the Vendio Platform FREE. Truly Affordable Sales Automation. Try the Vendio Platform FREE. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! On Jun-28-11 at 21:23:34 PDT. Seller added the following information: Please read the shipping terms very carefully. Any item purchased can be picked up at our warehouse in Central Falls. RI by appointment only during the hours of 10 am to 2 pm Monday To Friday. Local Pickups are subject to 7% Rhode Island Sales Tax. All shipments are sent by UPS or COMMON CARRIER. Used items shipping common carrier are not insured. Please inquire about additional Insurance. All shipping/handling charges are for
Huge Lot of 8 Hoppers for EDHARD Model MK Donut Pastry Filler Machine
Up for sale are 8 edhard fillers you will get everything you see on the table in the pictures 4 units have lids the others do not. some units may have some cracks but not that bad please look at the pictures If you dont see it in the pictures your not going to get it please feel free to contact me with any questions 586-612-0110
EDHARD DONUT JELLY FILLER HOPPER FITS MODEL MK
Up for bid is a good Donut Jelly Filler Hopper works with Model MK. No cracks but has some scratches and cosmetic wear. works great! Please bid with Confidence! I Only Ship to the Continental US! No International Shipping!
EDHARD MODEL MK DONUT JELLY FILLER MACHINE W/HOPPER NICE!
Up for your consideration is a nice Edhard Donut Jelly filler Machine 120v. Model MK. The machine works great and is clean, the only thing is the arm is broken off which happens often with these type of machines but the button is fine for pushing. The Edhard machine also comes with the hopper, both might need a light cleaning before use if you choose. Thanks for Looking! I Only Ship to the Continental US! No International Shipping!
Lot Of 2 Edhard F-5007 Pastry Filler Hopper 18 Quarts
You are bidding on a lot of 2 Edhard F-5007 donut filler.They are used comes with one pump,one nozzle and one propelar,this set up retails new for over $700 get it for way less.Winning bidder pays $40 for shipping.Happy bidding.
Edhard Model MK Donut Pastry Jelly Filler Machine
Edhard Donut/Pastry Filler Model MK This is a lightly used Edhard jelly filler for donuts and/or pastries. You are buying the power base. Two hoppers, four impellers, three nozzles, one hopper cover, two pump assembly covers and bolts(one cover does not have a gasket seal) Everything you see in the photos. Clean and in great condition. Unit was tested and works like it should. It is being sold from a former donut shop. This unit is sold with no warranty. This sale is final. No refunds or returns. Only shipping to Continental US. Paypal payment only.
Edhard Mk Donut Filler Base Only with bonus piece
This item includes a power cord and the base for the Edhard MK Donut/Jelly Filler- item does power on and works properly- there is a small additional screw on piece on this unit as seen in the photos Thank you
Edhard Model MK Electric Power Donut Jelly Filler Base Pump Depositor Machine
Edhard Model MK Electric Power Donut Jelly Filler Base with 2 Hoppers and 2 Lids Great working condition. Please look at pics for condition. One of the lids has two hair-like cracks but still functional. $50 UPS ground shipping or free with local pickup. All sales are final. No returns.
Edhard F-3011 Spout for Eclairs Jelly Donut
This piece is Used. May have minor scratches or discoloration. Works on Edhard depositor hopper. Stock photos. Edhard F-3011 Spout.
Edhard Model MK Base Pump Depositor with 3 hoppers **
Edhard model MK power base with 3 hoppers. 2 hoppers are complete and intact. 1 hopper is missing a nozzle retaining plastic tab*please see first hopper pictures) and the lid. There are also 7 stainless steel and one plastic nozzles. This unit was in service until June of 2014 and is completely functional. The trigger bar is complete and without defects. I am selling because I am no longer in business. This unit is also available for sale locally and if you wish can be picked up at auctions end. Thanks for viewing.
*USED* EDHARD MK JELLY PUMP / DEPOSITOR - COMMERCIAL - BAKERY - DONUT
USED* EDHARD JELLY PUMP/ DEPOSITOR! MODEL# MK NEW THIS ITEM COSTS MUCH. MUCH MORE! SAVE BIG $$$$$ NOW! THIS ITEM WAS REMOVED FROM A WORKING ENVIRONMENT AND PLACED IN OUR WAREHOUSE. IT IS WORKING& IT HAS BEEN CLEANED AND IS SPOTLESS. WHAT YOU SEE IS WHAT YOU GET. THIS ITEM IS BEING SOLD"AS-IS" WITHOUT ANY GUARANTY OR WARRANTY. DIMENSIONS: SMALL COUNTER TOP EQUIPMENT ELECTRICAL REQUIREMENTS: 120 VOLT. 1 PHASE, 60 HZ- 53 AMP SHIPPING& HANDLING DETAILS: We do not charge extra for packing/ palletizing. This item will be shipped via FedEx Ground. Please contact us for a shipping quote. If the item is damaged when it is delivered DO NOT accept the delivery. No International Shipping; 48 Domestic United States Only. Local pick up is acceptable with no fee. PAYMENT DETAILS& TERMS: We accept Paypal. Check, All Credit/ Debit Cards, ... moreCash. Sales tax applies for local pick ups or if the item is shipped to a Georgia, United States address. Please pay with in 1-Day after the item is purchased, otherwise we have the right to cancel your bid/ offer. All used equipment is sold AS-IS and without warranty. If you have questions do not hesitate to ask. We are a business and only operate on weekdays. All items listed on eBay are always available for purchase in person in our warehouse. RETURNS: We do our best to make sure that we represent the items we sell accurately. We only issue refunds if our description was not accurate and within 30 days of purchase. The buyer must contact us within 2 days of the delivery if there is a problem. We accept returns within 30 days of the purchase. There is a 10% restocking fee for all returns. The buyer is responsible for all return shipping charges.
Edhard Mk Donut Filler Base Only with bonus piece, power cord
Up for Auctions is a used Edhard Model MK industrial filler. This item includes a power cord and the base for the Edhard MK Donut/Jelly Filler- item does power on and works properly- there is a small additional screw on piece on this unit as seen in the photos See all of the pictures and ask questions if needed. Watch the video of the unit in action. The speed changes work great. I have changed the speed from 0 to 99 and the switch handle works great. The variations change fine. I have used the PR very little. The SE key will allow you to step the motor to engage the drive. Each time i press the SE the motor moves a small amount. In the 4th picture you will see a line under the power plug. This i a slight crack in the casing. Does not appear to affect anything. The motor works great. We have not used the extra external plug outlet in the ... moreback. Please watch the video of the unit in action. click the link below: We have tried our best to describe this unit to the best of our ability. If we missed anything please let us know and we will update if needed. Only comes with the base motor and a power cord. And the extra piece shown in the photo that is mounted on the top of the unit. please ask questions if needed. Normal 0 false false false MicrosoftInternetExplorer4 WE WANT YOU TO BE HAPPY WITH YOUR PURCHASE AND OUR SERVICE SHOULD YOU HAVE A PROBLEM PLEASE CONTACT US AS SOON AS POSSIBLE THROUGH THE EMAIL SYSTEM BY USING THE“ CONTACT MEMBER” BUTTON BEFORE FILING A COMPLAINT SO THAT WE CAN WORK TOGETHER TO ACHIEVE OUR GOAL OF 100% CUSTOMER SATISFACTION. Please read details before bidding 1- We want positive feedback. 2- Please contact us before leaving negative/neutral feedback. We will always do what ever we can to make every buyer a happy buyer.
Edhard P-4010 MK Donut Pastry Jelly Filler Machine + 3 Hoppers
Edhard Model P-4010 MK Donut Pastry Jelly Filler Machine Includes base. 3 Edhard hoppers with lids, 5 extra spouts with closures, and one Edhard scraper. Base and one hopper was used once. Two hoppers have never been used. The scraper and extra spouts are all brand new. The unit has been tested and is working great. Please look ata ll the pictures and email me with any questions. Selling as- is. No warranties. Thank you.
EDHARD JELLY HOPPER FOR DONUTS AND PASTRIES MISSING BOTTOM PLATE
This auction is for a used Edhard jelly hopper for filling donuts and pastries. It has the two sprockets but is missing the bottom plate that they go on. It also is missing the 2 front hooks. This can all be seen in the pictures.
EDHARD MODEL MK DONUT PASTRY JELLY FILLER HOPPER
EDHARD HOPPER. FITS MODEL MK. COMES WITH HOPPER. LID, GEARS, SEAL, GEAR COVER, 4 GEAR COVER BOLTS AND 2 SPOUTS FRONT HOOK THAT HOLD THE SPOUTS ARE BROKE OFF BUT CAN BE FIXED. NEW ONES CAN BE ORDERED FROM EDHARD OR YOU CAN FIX WITH SCREWS AND WASHERS. EVERYTHING IN THE PICTURES IS WHAT YOU ARE BIDDING ON. SHIPPING WILL BE $20.00 IN THE CONTINENTAL USA ONLY ANY QUESTIONS PLEASE ASK. THANKS.
Edhard Mk P4010 P-4010 Electric Donut Filler With Hopper
You are bidding on an Edhard Mk P4010.The unit is in great working condition and cosmetically good,comes with one hopper,look at the last picture it has a crack in the back but has no bearing in the performance of the unit guarantee to be as stated or your money back plus shipping fee.Winning bidder pays $40 for shipping.Happy bidding.
Edhard Mk Electric Donut Filler Machine With Hopper
You are bidding on an edhard MK donut filler machine.The unit works fine and as pictured,the push button bar is missing,the hopper has a big cracked on the left bottom corner but works fine it is just cosmetic,guarantee to be as stated and pictured or your money back plus shipping fee.Winning bidder pays $40 for shipping.Happy bidding. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14951f6c439-0x10c-
Edhard Model MK Donut Jelly Filler Machine With 4 Hoppers
Unit is in Working Condition. Needs a good cleaning. See Photos. auction is for 1 edhard mk + 4 hoppers I have 2 of these machines available each comes with 4 hoppers. the push bar is missing on one the button works fine there is no lids with the hoppers Shipping is a flat 20 dollars upper 48. Be sure to check out my other auctions!
LOT OF 4 EDHARD JELLY FILLING PINS NEEDLES NICE!
Up for bid is a lot of 4 Jelly hopper filling pins in nice shape!
EDHARD F-5001 6 Qt Clear Double Spout Pastry Hopper w/ Double Spouts
4@ USED EDHARD F-5001 6 Qt Clear Double Spout Pastry Hopper w/ Double Spouts Use this unit to fill doughnuts. Eclairs or even cream puffs. Model# F-5001 Material: Polycarbonate Includes 2 Standard Spouts Double Spout Model Capacity: 6 Qt Gear type pump Donut fillter Height: 14" Width: 9" Length: 9" Weight: 7.5 lbs Made in USA
EDHARD ELECTRIC DONUT PASTRY FILLER w/ 4 HOPPERS JELLY PUMP
REALLY NICE USED EDHARD ELECTRIC DONUT PASTRY FILLER w/ 4 HOPPERS JELLY PUMP/ USED Edhard P-4010 120 Volt Power Base for Donut/ Pastry Filler w/ 4 6qt Clear Double Spout Filler Units Edhard MK P-4010. 120 Volt Power Base for Donut/ Pastry Filler The F Series filler units fit on this power base. Model# MK P-4010 Four different cycles Digital keypad Manual trigger switch Volts: 120 1/37 Hp Height: 6-3/4" Width: 15" Depth: 9" Weight: 17 lbs It is our intent to establish many satisfied customers. Descriptions are made as accurately as possible. Our intention is not deceive anyone. We describe the positives along with the negatives. We try to give you as much information as possible and a direct link to the manufacturer if possible. Winning bidder to pay for shipping/handling and insurance charges. All shipments are sent by UPS ... moreor Common Carrier and insured if possible All shipping/handling charges are for Continental USA only. Please inquire for international shipping charges. Payment should be received no later than 7 days after contact following the close of this auction. Please resolve questions via E-mail BEFORE bidding. You are buying used or new equipment and is AS IS with no returns unless otherwise stated. I reserve the right to end auction early if item sells locally.
EDHARD P-4010 DONUT FILLER, PASTRY FILLER, GLAZING, JELLY TWIN, DEPOSITOR
LET US KNOW IF YOU DON'T HAVE A PAYPAL ACCOUNT OR HAVE TROUBLE PLACING A BID RECIPEFORQUALITY@GMAIL.COM You are bidding o n a Edhard P-4010-MK 120 Volt Power Base for Donut/ Pastry Filler and spout filler unit. Use this unit to fill doughnuts. Eclairs or even cream puffs. The unit is 1 phase and can be plugged in a regular outlet. Model# P-4010-MK Four different cycles Digital keypad Manual trigger switch Volts: 120 1/37 Hp Height: 6-3/4" Width: 15" Depth: 9" Weight: 17 lbs CONDITION This lightly used machine comes from local bakery that went out of business. It's in perfe ct working order and ready for operation. Checked and tested by our technician. BONUS: The power base comes complete double spout filler unit- $249 value. WARRANTY We accept 14 days returns* and offer 30 days major parts warranty. PAYMENT We accept ... moreall forms of payment. Including: Visa and MasterCard over the phone, PayPal, Direct Wire Transfers, Business and Personal Checks. Cash, when pick up is in person. Payment is due within three business days. When deciding on a type of payment to use, please consider clearing time for different types of payments. Clearing time depends on payment method and as follows: Credit Cards(Visa. MasterCard) and W ire Transfers- same day. Business checks 3- 4 days. Personal checks- up to 7 days. PayPal(we are PayPal verified) up to 45 days(48 hours for most buyers) SHIPPING Shipping is FREE to 48 contiguous states. Your purchase will be shipped within three business days after payment is cleared. CUSTOMER PICK-UPS Feel free to stop by our warehouse to pick up your purchase. Please email us to arrange pick up) TAXES CA tax is 9% WHO WE ARE MCE.Inc. NICEEQUIP) is a small, family owned business located in San Francisco Bay Area. We strive to offer quality, used equipment at reasonable prices. EQUIPMENT WE SELL We do not sell every piece of equipment that is brought to us. We specialize in well-known. Trusted brands and hard to find pieces that are in good to excellent condition. As a rule we d
Edhard Donuts and pastry filler spouts
These are used items.But are in good conditions.
EDHARD SINGLE SPOUT FILLER HOPPER
EDHARD 16 QRT SINGLE/ WITH 4 SPOUT DISPENSER `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14ae5d0ec27-0x113-
Edhard Single Spout 15Qt Hopper
Edhard Single Spout 15Qt Hopper Same day shipping! SPECIFICATIONS. Spouts: 1. Capacity: 15Qt. Pump Configuration: Gear type. These filler units are molded in clear. FDA approved polycarbonate. The single outlet is used to deposit smooth batters, cream cheese, preserves etc. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Discount Bakery Equipment is a full service bakery equipment provider. We are more than just an equipment vendor. We are also a full service bakery design consulting firm. Whether you are just starting up or need to revamp your entire operation. We are the ones to call. We ... morecollectively have over 75 years of experience designing bakery layouts as well as servicing and selling the equipment you need to be successful! We stand behind all of our products and services 100% Located In Michigan. We offer Full Service and Delivery in the Great Lakes area. Discount Bakery Equipment Men of Integrity 1-877-331-BAKE. Mon-Fri 8am to 4pm Est.
Edhard 18qt Filler Unit Single Outlet
In good working condition. 18qt with single outlet
USED 2 stainless steel SPOUT for Edhard filler
you are bidding on 2 used stainless steel spouts for Edhard filler machine in good condition. lenght 4" diameter 7/8"
DPF Edhard Donut Jelly Cream Filler/ Power Base, # 305A Bakery ~ FREE SHIPPING
DPF Edhard Donut Jelly Cream Filler/ Power Base. 305A Bakery ~ FREE SHIPPING Description. Hello. Up for consideration is a DPF Edhard Donut Jelly Cream Filler/ Power Base. 305A Bakery ~ FREE SHIPPING Good working unit that comes with all you see in the photos. The digital screen is crisp and clear. The filler and pump will need a cleaning. Free shipping for ALL of the USA! IF YOU RECEIVED AN ITEM“NOT AS DESCRIBED” PLEASE CONTACT US A.S.A.P AFTER YOU RECEIVED AN ITEM. SO. WE CAN RESOLVE THE PROBLEM. DEAR BUYER PLEASE CONTACT US BEFORE YOU SEND AN ITEM BACK OR LEAVE A NEUTRAL OR NEGATIVE FEEDBACK IF THE ITEM"NOT AS DESCRIBED"
Edhard hopper cream filling
Used edhard hopper. Picture shows a Crack with taped up. But it doesn't effect the performance at all. I tried to clean this but may need more detail job. Ships for $18.99 to lower 48 states
LOT (3) GENUINE EDHARD FILLER UNITS HOOPER FOR PASTRY FILLER JELLY PUMP
EDHARD FILLER UNITS THIS CAME FROM A BUSINESS THAT RECENTLY CLOSED DOWN. THESE ARE GENUINE EDHARD FILLER UNITS. ONE OF THE UNITS WILL COME WITH A SET OF SPOUTS AND THE OTHER TWO WONT. BESIDES THE SPOUTS THEY'RE OTHERWISE COMPLETE WITH LIDS. BASE PLATES AND GEARS ETC. IN THE THE PICTURES YOU CAN SEE THAT ONE OF THE BASEPLATES HAS A COUPLE OF HAIRLINE CRACKS IN IT. IT DOESNT LEAK AT ALL BUT THAT PIECE MAY NEED TO REPLACED SOON. WINNER GETS ALL 3 HOPPERS GUARANTEED IN GOOD WORKING CONDITION_ WE WANT TO HEAR FROM YOU. ALL OFFERS CONSIDERED. CALL. EMAIL OR TEXT JOE AT(860) 348-JOEY(5639) WARRANTY WE GUARANTEE the item you purchase is in the condition advertised as reasonably described above. WE STAND BY EVERYTHING WE SELL and will do all we can to make sure you're fully satisfied with your purchase. Any discrepancies or defects should ... morebe reported to us promptly.
Edhard Automatic Donut Filler Pastry Filler Glazing Jelly Pump
Edhard Automatic Donut Filler Pastry Filler Glazing Jelly Pump Description: Used but in great condition. Works perfectly! Comes with 1 Hopper. Uses a regular 110 volt plug. Ready to go! Shipping: UPS Ground: $40.00
EDHARD RP SERIES Donut SPOUT FILLER HOPPER 18 quart
Up for sale is a edhard rp series hopper it comes with the lid. The single one star filler and dual 2 filler as shown its an 18 quart RP-Series filler units* feature the same stainless steel construction and hopper capacities as the FS-Series. However. Their distinguishing characteristic is the three-lobe impellers. This pump can dispense viscous products, containing particles up to the size of a 3/8" 10mm) diameter without crushing. The RP-Series is also used to dispense lumpy products as well as delicate products, which cannot be"overworked" while being pumped. These units are only available in a single outlet configuration and accept most spouts and accessories Please feel free to ask any questions I have multiple units available