|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Collierville, United States The fully welded cutting blade digs deep and cleans out the hole for less follow up work. These auger bits are designed to work in moderate soil conditions. ... moreConditions Precedent to Submitting a Valid Warranty Claim.
Buy It Now
Free Shipping Condition: New Location: Collierville, United States The fully welded cutting blade digs deep and cleans out the hole for less follow up work. These auger bits are designed to work in moderate soil conditions. ... moreConditions Precedent to Submitting a Valid Warranty Claim.
Buy It Now
Free Shipping Condition: New Location: Collierville, United States The fully welded cutting blade digs deep and cleans out the hole for less follow up work. These auger bits are designed to work in moderate soil conditions. ... moreThe parties agree that arbitration shall be conducted pursuant to the provisions of the Federal Arbitration Act, 9 U.S.C. Sec.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Unlike gasoline auger power heads our battery-powered augers produce no smog, are quieter & Light Weight: at only 25+ lbs. CO-FRIENDLY & SAFE: Unlike ... moregasoline auger, battery-powered auger produce no smog and are quieter.
Buy It Now
Free Shipping Condition: New Location: Martinsville, United States TORO/DINGO AUGER HEAD WITH 12IN BIT. TORO/DINGO AUGER HEAD AND 12 IN BIT- LOCAL PICKUP. TORO/DINGO AUGER HEAD AND 9 IN BIT- LOCAL PICKUP. At that point ... moreit will be your responsibility to move the product.
Buy It Now
Free Shipping Condition: New Location: Wheat Ridge, United States Tool Tuff Direct presents the Earth Ogre line of industrial duty, hex drive augers and hydraulic power-heads for skid-steers. Replaceable rock tip fixture.
Buy It Now
Free Shipping Condition: New Location: Wheat Ridge, United States Tool Tuff Direct presents the Earth Ogre line of industrial duty, hex drive augers and hydraulic power-heads for skid-steers. Replaceable fish-tail style ... moretip. Replaceable cutting edges, industry standard size.
Buy It Now
Free Shipping Condition: New Location: Louisville, United States The auger adapter is a 2" female hex to 2-9/16" male round. Heavy-Duty Auger Adapter. - Fits 2-9/16" Female Round Auger, uses 7/8" pin or bolt to secure. ... more- Fits 2" Male Hex Power Head, uses 3/4" or 7/8" pin or bolt to secure.
Buy It Now
Free Shipping Condition: New Location: Wheat Ridge, United States Tool Tuff Direct presents the Earth Ogre line of industrial duty, hex drive augers and hydraulic power-heads for skid-steers. Replaceable rock tip fixture.
Buy It Now
Free Shipping Condition: New Location: Martinsville, United States STANDARD SKID STEER QUICK ATTACH AUGER HEAD WITH 36IN BIT. Auger S pecifications Double flight bits with any hex head auger that uses 2" bits. At that ... morepoint it will be your responsibility to move the product.
Buy It Now
Free Shipping Condition: New Location: Louisville, United States The auger adapter is a 2" female hex to 2" male round. Heavy-Duty Auger Adapter. - Fits 2" Female Round Auger, uses 2 qty 1/2" pins or bolts to secure. ... more- Fits 2" Male Hex Power Head, uses 7/8" or 3/4" pin or bolt to secure.
Buy It Now
Free Shipping Condition: New Location: Collierville, United States The fully welded cutting blade digs deep and cleans out the hole for less follow up work. These auger bits are designed to work in moderate soil conditions. ... moreConditions Precedent to Submitting a Valid Warranty Claim.
Buy It Now
Free Shipping Condition: New Location: Martinsville, United States STANDARD SKID STEER QUICK ATTACH AUGER HEAD WITH 18IN BIT. Auger S pecifications Double flight bits with any hex head auger that uses 2" bits. At that ... morepoint it will be your responsibility to move the product.
Buy It Now
Free Shipping Condition: New Location: Canada 2" female hex to 2" male round Heavy-Duty Auger Adapter. Fits 2" Female Round Auger, uses 2 qty 1/2" pins or bolts to secure. Included Components: Auger ... moreAdapter. Fits 2" Male Hex Power Head, uses 7/8" or 3/4" pin or bolt to secure.
Buy It Now
$141.98 Shipping Condition: New Location: Denver, United States All augers have been engineered to take on all sizes of job. Auger Bit Specifications. Auger Length: 4ft.
Buy It Now
Free Shipping Condition: New Location: Collierville, United States The fully welded cutting blade digs deep and cleans out the hole for less follow up work. These auger bits are designed to work in moderate soil conditions. ... moreConditions Precedent to Submitting a Valid Warranty Claim.
Buy It Now
Free Shipping Condition: New Location: Wheat Ridge, United States Tool Tuff Direct presents the Earth Ogre line of industrial duty, hex drive augers and hydraulic power-heads for skid-steers. Replaceable tip fixture.
Buy It Now
$15.01 Shipping Condition: New Location: Lewis Center, United States Replaceable teeth for the Hole Digger Head Augers.This tooth fits Danuser augers. It is held in with a roll pin.
Buy It Now
$49.00 Shipping Condition: New Location: Tracy, United States NEW WELD ON REPLACEMENT HEAD* For Double Flighted augers Pt# 10D-I 10" Double flighted Dirt Cutter Head Replacment Your Solution to a worn out AUGER ... moreHEAD Replacable weld on Cutter Head CUTS 11-1/2" Complete with 35 Series Teeth and SB35 Fishtale Pilot with 1-1/4" Sq shank Any questions please contact: 1-800-331-9988 Teeth Quantity will vary depending on Size of Cutter Head Click Here. Double your traffic. Get Vendio Gallery- Now FREE! On Jun-13-12 at 15:37:59 PDT. Seller added the following information:
Buy It Now
Free Shipping Condition: New Location: Martinsville, United States STANDARD SKID STEER QUICK ATTACH AUGER HEAD WITH 6IN BIT. Skid steer quick attach mount. At that point it will be your responsibility to move the product. ... more84" XHD GRAPPLE FITS SKID STEER LOADER QUICK ATTACH - LOCAL PICK UP.
Buy It Now
Free Shipping Condition: New Location: Wheat Ridge, United States Tool Tuff Direct presents the Earth Ogre line of industrial duty, hex drive augers and hydraulic power-heads for skid-steers. Replaceable fish-tail style ... moretip, square mounting socket. Replaceable cutting edges, industry standard size.
Buy It Now
Free Shipping Condition: New Location: Martinsville, United States For sale is a brand new in the crate Toro 22804 TX413 Auger Power Head. You do not have to guess at what you are buying. We are a certified Toro Dingo/CUL ... moreequipment dealer in central Illinois. You can see us at AWESOMEMACHINES.NET. If you have any questions about the unit please send us an email and we will get back to you as soon as possible. This auction is for the powerhead ONLY. It does not include the auger bits. Please allow up to 3 days for handling and an additional 3-5 business days for delivery in the continental United States. High speed drive Single directional pivot Auger Speed 66 rpm@ 6.5gpm(24.6 lpm) 90% efficiency) Engine Displacement 20. cubic inches(327.3 cc) Hoses Two high-pressure hoses Pivot Pins 1" 2.54 cm) Quick Couplers Male& Female Flush Face Rated Pressure 3000 psi(206.6 bar) continuous Standard Equipment Quick Couplers Torque 654 ft-lb(886.7 N) 2650psi(182.6 bar) 6.5gpm(24.6 lpm) Someone is going to get a good deal with this one! CONTACT US FOR A FREIGHT QUOTE BEFORE THE END OF THE AUCTION. BUYER WILL BE RESPONSIBLE TO PAY FOR FREIGHT BEFORE UNIT WILL BE DELIVERED. IF YOU CONTACT ME WITH YOUR ADDRESS AND ZIP CODE I WILL GET YOU A FREIGHT QUOTE BEFORE THE END OF THE AUCTION. THEN AT THE END OF THE AUCTION I WILL SEND YOU A FINAL INVOICE WITH THE AUCTION AMMOUNT PLUS FREIGHT. AGAIN, THE UNIT WILL NOT BE SHIPPED WITHOUT FREIGHT BEING PAID. Check out my! `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14802139653-0x110-
Buy It Now
Free Shipping Condition: New Location: Martinsville, United States TORO/DINGO AUGER HEAD WITH 36IN BIT. Industry standard 2" hex output shaft. At that point it will be your responsibility to move the product. Toro/Dingo ... moremount. 36in bit included. Auburn planetary drive.
Buy It Now
Free Shipping Condition: New Location: Martinsville, United States TORO/DINGO AUGER HEAD WITH 12IN BIT. TORO/DINGO AUGER HEAD AND 24 IN BIT- LOCAL PICKUP. TORO/DINGO AUGER HEAD AND 9 IN BIT- LOCAL PICKUP. At that point ... moreit will be your responsibility to move the product.
Buy It Now
Free Shipping Condition: New Location: Downey, United States Toro Dingo HD 130-3855 2.5 Inch Wide Rock Head 13/16 Hex Shank Auger Pilot Bit. Brand new hard to findSee pictures for more details Comes with and exactly ... moreas shownFree shipping to lower Contiguous United States Thanks
Buy It Now
Free Shipping Condition: New Location: South Pasadena, United States Head and twist are ground to correct clearance for easy removal from hole. Feed-screw pilot draws bit into wood. For heavy construction and repair work ... morein mines, on docks and bridges as well as electrical work.
Buy It Now
$400.00 Shipping Condition: New Location: Fort Myers, United States VIRNIG MFG 36" x 4' AUGER BIT W/2" HEX DRIVE (11 TEETH) FITS ALL 2" HEX AUGER DRIVES. HDF AUGERS FEATURE A FABRICATED BORING HEAD WITH HARDENED BOLT-ON ... moreGAGE (OUTSIDE) AND WISDOM (INSIDE) TEETH, AS WELL AS A HARDENED FISHTAIL POINT.
Buy It Now
$99.00 Shipping Condition: New Location: Brownsboro, United States This fits a 2" hex auger bit. The SQ series features a great combination of performance and price for standard digging in light to moderate ground conditions. ... moreIt features a fabricated boring head, bolt on teeth (heat treated), heavy duty double wrap flighting, and a hardened fishtail point.
Buy It Now
Condition: New – Open box Location: Naples, United States The planetary gear drive provides high speeds and maximum torque to the auger, while transmitting minimal stress on the auger head components. Oem toro ... moreauger head and 12” bit or 9’’ bit. Choice between 9 or 12 in bit .
Buy It Now
Free Shipping Condition: New Location: Webberville, United States Replaces Part Number: AH219093. Grain Bin Loading. Featured Categories. Warranty1 Year Warranty.
Buy It Now
Condition: Used Location: San Francisco, United States These McMillen Augers are made for difficult ground conditions, compacted soils, heavy clay, asphalt, frozen ground and fracturable rock. The HDC Augers ... morefeature a heavy-duty cast steel boring head, hardened drive-in gage (outside) and wisdom (inside) teeth.
Buy It Now
Free Shipping Condition: New Location: Canada Heavy-Duty Auger Adapter is a 2" female hex to 2-9/16" male round. Fits 2-9/16" Female Round Auger, uses 7/8" pin or bolt to secure. Included Components: ... moreAuger Adapter. Fits 2" Male Hex Power Head, uses 3/4" or 7/8" pin or bolt to secure.
Buy It Now
$15.52 Shipping Condition: New Location: Salt Lake City, United States No other info given Can take measurements if needed.
Buy It Now
Free Shipping Condition: New Location: South Pasadena, United States Hardened steel for long life.
Buy It Now
$250.00 Shipping Condition: New Location: Fort Myers, United States DIGGA 18" x 48" ROCK RIPPER AUGER BIT W/2" HEX FITS ALL 2" HEX AUGERS.
Buy It Now
Free Shipping Condition: New Location: Wheat Ridge, United States Tool Tuff Direct presents the Earth Ogre line of industrial duty, hex drive augers and hydraulic power-heads for skid-steers. Replaceable fish-tail style ... moretip. Replaceable cutting edges, industry standard size.
Buy It Now
$400.00 Shipping Condition: New Location: Chouteau, United States Lengths: 48" (nom.). Hydraulic Motor Flow: 20/30 gpm (cont. Speed: 226/347 rpm (cont. Torque: 428/563 ft-lb (cont. Mower King Auger. It doesn't matter ... moreif it is a CAT, Bobcat, New Holland, John Deere, Case, Kubota, Caterpillar, ASV, Wacker Neuson, Volvo, or any other make. ).
Buy It Now
Free Shipping Condition: New Location: Martinsville, United States STANDARD SKID STEER QUICK ATTACH AUGER HEAD WITH 12IN BIT. Auger Specifications Double flight bits with any hex head auger that uses 2" bits. At that ... morepoint it will be your responsibility to move the product.
Buy It Now
$139.00 Shipping Condition: New Location: Brownsboro, United States This auger features the 2-9/16" round collar. This is an excellent combination of performance and price for standard duty digging in light to moderate ... moreground conditions. This unit features a fabricated boring head, bolt-on teeth, heavy duty double-wrap flighting, hardened fishtail point, and a round 2-9/16" drive shaft.
Buy It Now
Free Shipping Condition: New Location: Webberville, United States EXPERT SERVICE. Need help with a part you found?.
Buy It Now
$30.21 Shipping Condition: New Location: Tracy, United States NEW* Heavy Duty Replacement pt# DP2-HD-F-I 25pcs per bkt Carbide Tooth for DP Rock Auger type cutter heads Rock Augers are easily adapted to skid steer ... moreloaders. Wheel loaders, tractors, mini-skid loaders, backhoes, excavators, forklifts, cranes and other hydraulic machines with a 2" Hex connection. Tooth Details: For use when replacing worn out teeth for the DP Style Rock cutter head Soft to Medium drilling conditons 5/8" wide Carbide 2-1/2" Long www.drillingworld.com Any Questions or concerns please contact: John Deguzman 1-800-331-9988. Color of auger is photo purpose only. Teeth will vary per size of auger Click Here. Double your traffic. Get Vendio Gallery- Now FREE! On Jun-13-12 at 15:40:09 PDT. Seller added the following information:
Buy It Now
$25.00 Shipping Condition: New Location: Tracy, United States NEW WELD ON REPLACEMENT HEAD* 6" Dirt Cutter Head Replacement Your Solution to a worn out AUGER HEAD Replaceable weld on Cutter Head Complete with ... moretwo 35 Series Teeth and one SB35 Fish-tale Pilot with 1-1/4" Sq shank Teeth Quantity will vary depending on Size of Auger Cutter Head Click Here. Double your traffic. Get Vendio Gallery- Now FREE! On Jun-13-12 at 15:40:08 PDT. Seller added the following information:
Buy It Now
Free Shipping Condition: New Location: Wheat Ridge, United States Tool Tuff Direct presents the Earth Ogre line of industrial duty, hex drive augers and hydraulic power-heads for skid-steers. Replaceable fish-tail style ... moretip.
Buy It Now
Free Shipping Condition: New Location: Martinsville, United States STANDARD SKID STEER QUICK ATTACH AUGER HEAD. Skid steer quick attach mount. At that point it will be your responsibility to move the product. NURSERY ... moreFORKS 65" LONG FORK BLADE SKID STEER QUICK ATTACH - LOCAL PICKUP.
Buy It Now
Free Shipping Condition: New Location: Martinsville, United States STANDARD SKID STEER QUICK ATTACH AUGER HEAD. Auger Specifications NURSERY FORKS 65" LONG FORK BLADE SKID STEER QUICK ATTACH - LOCAL PICKUP. LOCAL PICKUP ... morein Martinsville, IN. We are here to make sure you are satisfied!
Buy It Now
Free Shipping Condition: New Location: South Pasadena, United States Unique head shape minimizes vibration when drilling versus ordinary paddle bits. Unique cutting head design allows you to customize the hole shape.
Buy It Now
$200.00 Shipping Condition: New Location: Fort Myers, United States MADE FOR SOLID, FRACTURABLE ROCK, FROZEN GROUND AND COMPACTED SOILS. FEATURE BULLET STYLE TEETH AND A FABRICATED BORING HEAD, AS WELL AS HEAVY DUTY SINGLE ... moreFLIGHTING. ITEM # 157431.
Buy It Now
Free Shipping Condition: New Location: South Pasadena, United States Unique head shape minimizes vibration when drilling versus ordinary paddle bits. Unique cutting head design allows you to customize the hole shape.
Buy It Now
$300.00 Shipping Condition: New Location: Fort Myers, United States HDF AUGERS FEATURE A FABRICATED BORING HEAD WITH HARDENED BOLT-ON GAGE (OUTSIDE) AND WISDOM (INSIDE) TEETH, AS WELL AS A HARDENED FISHTAIL POINT. MADE ... moreFOR LIGHT TO MODERATE GROUND CONDITIONS. Will work on all Mini Skid Steer Loaders and all Full-Size Skid Steers.
Buy It Now
$51.94 Shipping Condition: New Location: Tracy, United States NEW WELD ON REPLACEMENT HEAD* For Double Flighted augers Pt# 10D-I 10" Double flighted Dirt Cutter Head Replacment Your Solution to a worn out AUGER ... moreHEAD Replacable weld on Cutter Head CUTS 11-1/2" Complete with 35 Series Teeth and SB35 Fishtale Pilot with 1-1/4" Sq shank Any questions please contact: 1-800-331-9988 Teeth Quantity will vary depending on Size of Cutter Head Click Here. Double your traffic. Get Vendio Gallery- Now FREE! On Jun-13-12 at 15:37:59 PDT. Seller added the following information:
Buy It Now
$53.76 Shipping Condition: New Location: El Dorado Springs, United States Thick Boring Head. RL08 Teeth.
Buy It Now
$375.00 Shipping Condition: New Location: Wheat Ridge, United States Tool Tuff Direct presents the Earth Ogre line of industrial duty, hex drive augers and hydraulic power-heads for skid-steers. Replaceable rock tip fixture. ... moreReplaceable cutting edges, industry standard size.
Buy It Now
$41.05 Shipping Condition: New Location: Shelbyville, United States NEW WELD ON REPLACEMENT HEAD* For Double Flighted augers Pt# 10D-I 10" Double flighted Dirt Cutter Head Replacment Your Solution to a worn out AUGER ... moreHEAD Replacable weld on Cutter Head CUTS 11-1/2" Complete with 35 Series Teeth and SB35 Fishtale Pilot with 1-1/4" Sq shank Any questions please contact: 1-800-331-9988 Teeth Quantity will vary depending on Size of Cutter Head Click Here. Double your traffic. Get Vendio Gallery- Now FREE! On Jun-13-12 at 15:37:59 PDT. Seller added the following information:
Buy It Now
$250.00 Shipping Condition: New Location: Fort Myers, United States There is NO warranty on this bit due to the nature of its use. MADE FOR SOLID, FRACTURABLE ROCK, FROZEN GROUND AND COMPACTED SOILS. FEATURE BULLET STYLE ... moreTEETH AND A FABRICATED BORING HEAD, AS WELL AS HEAVY DUTY SINGLE FLIGHTING.
Buy It Now
Free Shipping Condition: New Location: Webberville, United States Replaces Part Numbers: 87620690, 410718A1, 187081, 1307259C1, 1307259C2, 87051323, 87666079, 87685315. Fits Case IH Grain Platforms: 810, 820, 1010, 1015, ... more1020, 2010 (BSN CBJ20701), 2020 (BSN CBJ20701).
Buy It Now
$200.00 Shipping Condition: New Location: Fort Myers, United States PENGO 6" x 48" SRR ROCK AUGER BIT W/2" HEX FITS ALL 2" HEX AUGER DRIVES. MADE FOR SOLID, FRACTURED ROCK, FROZEN GROUND AND COMPACTED SOILS. FEATURE BULLET ... moreSTYLE TEETH AND A FABRICATED BORING HEAD, AS WELL AS HEAVY DUTY SINGLE FLIGHTING.
Buy It Now
$300.00 Shipping Condition: New Location: Fort Myers, United States HDF AUGERS FEATURE A FABRICATED BORING HEAD WITH HARDENED BOLT-ON GAGE (OUTSIDE) AND WISDOM (INSIDE) TEETH, AS WELL AS A HARDENED FISHTAIL POINT. MADE ... moreFOR LIGHT TO MODERATE GROUND CONDITIONS. EQUIPPED WITH HEAVY-DUTY DOUBLE FLIGHTING.
Buy It Now
Free Shipping Condition: New Location: Kansas City, United States Angled Design. Angle design which shears through wood cleanly without excessive chipping. Effortless Drilling: The oversized cutting head of the auger ... moredrill bit and secondary relief angle provide fast cuts with efficient chip removal.
Buy It Now
Free Shipping Condition: New Location: Webberville, United States Fits 9650STS 9660STS 9750STS 9760STS 9860STS. Made to Replace AH207168 AH208602 AXE12250 COH60-0070. How do I know if my order was submitted properly?. ... moreNeed help with a part you found?.
Buy It Now
Free Shipping Condition: New Location: Webberville, United States Replaces Part Number(s): AH218485, AH154330, AH204566, AH205897. Featured Categories.
|
|
|
|
Pengo pressure digger auger head, 16 inch diameter #2
You are viewing a used 16 inch auger that was used with a pressure digger truck to dig holes for electic poles. This is a really heavy duty auger. It has a 2 5/8 inch square hole for attaching it to the drill shaft. It has replaceable teeth that you can order in either carbide tipped or plain steel. They look in good condition- see photos. The auger has been hardsurfaced all over- see the photos. Check out my other listings for more bucket truck and digger derrick related items. I can freight this to you on a pallet. Email me for a quote. Or we can load it for you if you pick it up in person. PAYMENT AND AUCTION REQUIREMENTS Do not ask me to sell it early. Or take less than the starting price. I will not end the auction for a local sale either. I can load it onto anything that you send to pick it up. Delivery for an additional fee is a possibility ... morewithin 250 miles of Fulton, Mo, 65251. E-mail me for a quote. I have a neighbor kid that helps me on the farm that will deliver stuff sometimes. I require payment in full within one week of auctions end. Once it is paid for, there is no hurry for you to pick it up- take six months if need be! If you don't come get it after six months have passed since the end of the auction, it will be resold, and my wife gets the proceeds. If you have a legitimate reason why you need to wait longer than six months to pick up your purchase, contact me and we will work something out. If you have any questions, you can e-mail or call me at(573) 219-6611. Thanks for looking and please check out my other auctions! LOCAL PICK UP I am a cattle farmer here in Mid-Missouri. So I am flexible about when you want to come and get items you have purchased from me, but I try and keep a schedule for my families benefit. I ask that you come between 9:00 in the morning and 4:00 at night. I am not available on Sundays whatsoever- that is God and family day, so don't ask! Just because I am a farmer does not mean that I am here everyday, I travel around to auctions and surplus sales and am gone sev
|
|
|
Pengo pressure digger auger head, 20 inch diameter, good carbide bullet teeth
You are viewing a used 20 inch auger that was used with a pressure digger truck to dig holes for electic poles. This is a really heavy duty auger. It has a 2 1/2 inch square hole. But it comes with the auger adapter installed in it that converts it to a 2 5/8 square hole. It just bolts into the auger so you can use it or remove it depending on what size kelly bar you use to drive the auger. It has replaceable teeth that look in good condition- see photos. Check out my other listings for more bucket truck and digger derrick related items. I can freight this to you on a pallet. Email me for a quote. Or we can load it for you if you pick it up in person. PAYMENT AND AUCTION REQUIREMENTS Do not ask me to sell it early. Or take less than the starting price. I will not end the auction for a local sale either. I can load it onto anything that you ... moresend to pick it up. Delivery for an additional fee is a possibility within 250 miles of Fulton, Mo, 65251. E-mail me for a quote. I have a neighbor kid that helps me on the farm that will deliver stuff sometimes. I require payment in full within one week of auctions end. Once it is paid for, there is no hurry for you to pick it up- take six months if need be! If you don't come get it after six months have passed since the end of the auction, it will be resold, and my wife gets the proceeds. If you have a legitimate reason why you need to wait longer than six months to pick up your purchase, contact me and we will work something out. If you have any questions, you can e-mail or call me at(573) 219-6611. Thanks for looking and please check out my other auctions! LOCAL PICK UP I am a cattle farmer here in Mid-Missouri. So I am flexible about when you want to come and get items you have purchased from me, but I try and keep a schedule for my families benefit. I ask that you come between 9:00 in the morning and 4:00 at night. I am not available on Sundays whatsoever- that is God and family day, so don't ask! Just because I am a farmer does not mean that I am here everyday, I
|
|
|
Pengo 30" auger for digger derrick w/ 2 5/8" kelly bar (hex head)
Pengo 30" dirt auger for digger derrick with 2 5/8" kelly bar(hex head)
|
|
|
Mccabe-Powers Earth Master Hydraulic Auger Head With Two Augers
This is a McCabe powers Earth Master hydraulic digger head off a boom truck. It is a vs-2 series. The serial number is 120051. It's tin by a speedy vickers hydraulic motor. Includes a shortened 2" Kelley bar and two augers with rock bits. The smaller auger needs two rock bits replaced, they are missing the larger auger has all the rock bits in place. This unit is overall in good condition. It isn't new and therefore doesn't look like new. It worked when the truck it was on was parked a year and a half ago. I cannot ship this but I will help load it on any truck or shipping company you send after it. Please refer all questions to the owner, mark miller at 6067488984. I will entertain any offers. Thanks for looking and happy bidding. Posted with 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1452a8bad05-0x10b-
|
|
|
LITTLE BEAVER AUGER HEAD MODEL 5
LITTLE BEAVER AUGER HEAD MODEL 5 S/N 5-25312 MANUFACTURED BY LB EQUIPMENT
|
|
|
i.7162 Mini Skid Steer Attachment-TORO Auger Head
Heavy Equipment Catagories How Our Freight Shipping Works In order to keep your costs down we are do not act as a shipping broker! As such there are no mark ups on the freight quotes. We will provide you all of the information available to us for you to find the best shipping option for you. You hire the freight company directly. Too confusing? No problem we will get on the phone with your chosen shipping company and provide them with all of the information on your behalf and you simply provide them with your payment method. Close by? Come pick it up! We will help load any equipment you purchase from us. Light Equipment Catagories i.7162 Mini Skid Steer Attachment-TORO Auger Head- SN: 240000706 Videos upon Request. Goldstar Equipment Supply Corp goldstarequipmentsupply.com, Address: 75 Windsor Ave Mineola. NY 11501, Sales Phone: 516.741.1000, ... moreOffice Phone: 516.741.1300, Fax: 516.741.2700, For Items that qualify for Free Shipping: Free Shipping is limited to the 48 Continental United States as almost all of our items need to be shipped through trucking/freight companies. For Local Pick Only up Items: Don't worry! You can still have a shipping/freight company pick it up for you! We can and do assist buyers with finding third party shipping arrangements and getting quotes. Buyer is responsible for shipping arrangement. This Item will be released in one to three business days after full payment is received. Shipment pick up address is 75 Windsor Ave. Mineola, NY 11501. Want to try it yourself? This item size is: 108"x52"x71" This items weight is: 13600 This items class is: tba We suggest you use freightquote.com New York Sate residents will be charged sales tax and local taxes and any other required New York State fees. Out of state buyers may still be responsible for paying state/ local tax though we do not collect any taxes. Full payment is due within 3 business days from time of purchase unless prior arrangements are made. Paypal is no longer accepted for heavy equipment due to exorbitant fees i
|
|
|
12" Rock Head Auger Bit
Cat rock head auger bit. Like new used a couple of times
|
|
|
Toro Dingo Mini Skid Steer Loader High Torque Auger Drive Head With 9" Auger Bit
CONTACT NICK FOR YOUR BEST DEAL WE ARE HERE TO HELP! 814)658-3066 This Auction is for a Toro Dingo High Torque Auger Drive For A Mini Skid Steer Loader With A 9" Auger Bit. This unit is in GOOD USED CONDITION! This unit is NOT CRACKED OR WELDED UP AT ALL! Used Toro Dingo High Torque Auger Drive With 9" Bit Parker Drive Motor Standard Two Pin Mini Skid Steer Quick Attach Will Fit Toro Dingo Ditch Witch Ramrod Vermeer Finn Eagle Late Model Kanga Power House And Others Comes With Hoses And Flat Face Couplers See All Pictures We Have Many Other New Mini Skid Steer Attachments For Sale Call With Your Needs And Will We Post Them For You! A MUST HAVE! WE ARE 1 OF CID Xtreme's TOP TEN DEALERS CALL US WITH ANY QUESTIONS ON OUR PRODUCTS! WE ARE OPEN FOR BUSINESS 24/7. We can ship no problem! Please just email or call for a freight quote ... more24/7. We Give a 5 Star Service on Ebay and are ready to help in any way. If you have any questions please ask I Will be glad to help Just Email or Call(814)658-3066 Thanks Nick Payment: For payment we will take the following: $250.00 Paypal depoist due with in 24 hours of the auction close. Remainder due with in 5 business days. Shipping Costs: We DO NOT mark up any shipping prices. What it costs me it will cost you. There is no pallet fee. No loading fee and no banding fee. We get a 70% discount with our freight broker on LTL shipments and we pass that along to you. We make no money on shipping! Please understand diesel fuel is almost $5.00 a gallon. We are glad to help in any way with customer pickups also. Please when letting feedback on the DSR remember We are Providing a 5 Star Service and Would Like a Five Star DSR Rating In Return. Please if you have any questions call us we are glad to help(814)658-3066 Thanks Nick. PA Sales Tax: Please Read! PA Residents are subject to 6% PA SALES TAX! Unless you provide a PA Tax Exemption form for Resale or Farm Use. If you are from out of state and you have your item shipped to your state you are NOT SUBJECT PA SALES T
|
|
|
Compact Power Auger Power Head Attachment with Mounting Plate and Drill Bit
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 642669 A: 0015000000rC6qS O: 0065000000Tz5py PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Compact Power Auger Power Head Attachment with Mounting Plate and Drill Bit in unknown operating condition. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. We have two great buying formats to serve you– Bid Now Auctions and Fixed Price Buy Now listings. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles, industrial machine tools, general rental tools and other heavy equipment. View our Fixed Price store- also featuring construction machinery. Fleet vehicles& other industrial equipment ... morein a convenient Buy It Now(or Best Offer) format. Bid with confidence- 100% buyer satisfaction guaranteed and inspections always available. Low-cost shipping. Containerizing and port-access available for US and International shipping- for estimates click the Request Freight Estimate button below. Power Head Overview: Make: Premier Model: 700160 Serial Number: M824 Transport Weight: approx. 370 lbs Transport Dimensions: 45"L) x 47"W) x 39"H) Features/ Specifications: Auger Power Head( with mounting plate) Quick Coupler Hydraulic Connections Coupler OC: 1" 3" shaft Condition: Former rental units in good overall cosmetic condition. Power Head is in unknown operating condition. One drill bit and hose included See photos for more details. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. In addition, all conditions are cross-referenced with service personnel, operators, and maintenance system records(when available) bidadoo, Inc. makes no guarantees to actual hours, miles and/or operational condition. Photos and video take priority if there are discrepan
|
|
|
Pengo 15" Dirt Auger R-256 head 2 9/16" round
HI Guys. This is a 15" Pengo auger with a R-256 head(2 9/16" round) I originally purchased it for my Ditch Witch Mini-Skid Steer, but I've never used it. It has the 40/50 teeth and the Triflow pilot with the three wings. I use a 12" and 18" auger with the same setup and they work well in everything from dirt to hard-pack dirt with DG. In the DG the teeth wear quickly, but they are cheap to replace. I've dug some really hard material with these augers by just adding a lot of weight to it. I don't want to try and ship this, so I'm listing as pick-up only, but I do drive back and forth between Oxnard and the central coast up to Paso Robles and I head up to Visalia in the valley and as far as Escondido down the 15. So I'd be willing to meet up somewhere and deliver at no charge(provided you can work with ... moremy schedule) Thanks for looking.
|
|
|
Toro Dingo Mini Skid Steer - High Torque Auger Head Post Hole Digger - Ship $199
Shipping Cost is Only $199 to the lower 48 states to a Commercial Address* 256) 975-8641 This is a used Toro Brand Planetary High-Torque Auger Drive Head(Model 22802) for a Mini Skid Steer. It's in great condition and is ready to be put to use. The hoses are in good shape. There are no leaks on the unit and the gears and bearings all seem to be excellent. Auger Speed: 54 rpm( 41.6 L/min. 95% efficiency) Engine Displacement: 195 cc. Gear Drive Type: Auburn Gear Model 6 Planetary. Hoses: Two high-pressure hoses. Motor Type: Eaton 2000 series Gerotor. Pivot Pins: 2.54 cm. Quick Couplers: Male& Female Flush Face. Rated Pressure: 206.7 bar continuous. Standard Equipment: Quick Couplers. Torque: 2052.7 N@ 206.7 bar. 41.6 L/min. This will fit most brands of mini skid steers. It will not fit the Bobcat MT series. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~. ... moreSkid Steer Mounted Attachments: Auger Drive- Lowe 750 Classic- Complete with New 6" Bit- $1.679- New. Auger Drive- Lowe A220 Planetary Drive- Complete with New 6" Bit- $2.279- New. Auger Bit's form 4" up to 36" available- Price based on Size- New or Used. Pallet Fork's- 4000 pound capacity with 48" Fork's- $649- New. Walk Through Fork Frame- 4000 pound capacity with 48" Fork's- $695- New. Pallet Fork Back Plate Only- $395- New. Pallet Fork Back Plate with Used Class 2 Fork's- $500- Used. 72" Direct Drive Brush Cutter Bush Hog- $3.995- New. 60" Direct Drive Brush Cutter Bush Hog- $3.695- New. Lowe XR-21 Trencher- $4.995- New. 48" Light Duty Root Grapple Bucket- $895- New. 48" Rock Bucket Grapple- $895- New. 60" Light Duty Root Grapple Bucket- Dual Cylinder- $995- New. 66" Light Duty Root Grapple Bucket- Dual Cylinder- $995- New. 72" Light Duty Root Grapple Bucket- Dual Cylinder- $995- New. 66" Root Rake Grapple- Clam Shell- with Teeth- $1.895- New. 74" Root Rake Grapple- Clam Shell- with Teeth- $1.895- New. 84" Root Rake Grapple- Clam Sh
|
|
|
solid stainless steel hexagon head 6 inch auger bit skidsteer,tractor etc 4.1ft
I have a auger bit for sale. I'm not sure what it was used on tractor or skidsteer type auger bit. It is all stainless steel it measures 4ft 1in in length it is a 6 inch bit, you can see the different drill holes in the end i guess to match up to different gear boxes, i beleave the head is a hexagon shaped head, it is solid all the way through. Ship to USA only. Going to ship it USPS, becasue i don't want to send it out ups and you not be home and get it returned back to me only to ship again. Accept Paypal Only. Thank You and hope you can use it.
|
|
 |