|
Order by:
Available to:
eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: China Attenuation:1dB/3dB/5dB/6dB/10dB/15dB/20dB/30dB/40dB/50dB. 1 x Attenuator. Power: 5W/10W/30W/50W. 50W( 110mm x 50mm)/(4.33" x 1.96"). 5W( 60mm x 30mm)/(2.36" ... morex 1.18"). Connector: N type.
Buy It Now
$2.77 Shipping Condition: Neu Location: China SPF5189 RF Amplifier. 1 x LNA 50-4000MHz SPF5189 RF Amplifier. This RF low noise amplifier LNA is 50-4000MHz, NF = 0.6dB. LNA: 50-4000mhz. Can be used ... morefor high dynamic range receiver LNA application, and amplify small signal of 110dBM.
Buy It Now
$119.99 Shipping Condition: New Location: China •High performance: Externally modulated technology, no la'ser chirp, low dispersion distortion, high extinction ratio, with excellent characteristic within ... more40~862MHz. •Narrow bandwidth (0.65MHz), lower noise, DFB continuous-wave la'ser, is propitious to reduce the influence of the dispersion.
Buy It Now
Free Shipping Condition: New Location: Gainesville, United States Helium Hospots supported by this Lighting Arrestor ALFA ALR6 is an N-male to N-female lightning protector for outdoor antennas. This does include a gas ... moretube, but does not include a grounding rod. Why get a lightning protector?.
Buy It Now
Free Shipping Condition: New Location: China 30W( 85mm x 40mm)/(3.35" x 1.57"). 50W( 110mm x 50mm)/(4.33" x 1.96"). 10W( 60mm x 30mm)/(2.36" x 1.18"). Power:10W/30W/50W/100W. 100W( 140mm x 60mm)/(5.51" ... morex 2.36"). Connector: N type. Frequency Range: DC to 3.0GHz(0-3.0GHz).
Buy It Now
$30.00 Shipping Condition: Used Location: China After you have paid. This international order may take longer to arrive. Local pick up is not available.
Buy It Now
$2.54 Shipping Condition: Neu Location: China Can be used for high dynamic range receiver LNA application, and amplify small signal of 110dBM. You can cascade several LNA modules in order to improve ... moregain. 1 x LNA Low Noise Amplifier 50M~4Ghz. It has 0.6dB typical noise factor, 19dB typical gain, 23dB P1dB.
Buy It Now
Free Shipping Condition: New Location: San Gabriel, United States (XSA1075-TG spectrum analyzer. Model XSA1015 ( TG ) XSA1032(TG) XSA1036 ( TG ) XSA1075-TG. Marker frequency resolution span/(the number of sweep points ... more-1). XSA1075TG: 1GHz~4GHz -158dBm( nominated );4GHz~5GHz -153dBm( nominated ).
Buy It Now
$3.19 Shipping Condition: Neu Location: China SPF5189 RF Amplifier. 1 x LNA 50-4000MHz SPF5189 RF Amplifier. This RF low noise amplifier LNA is 50-4000MHz, NF = 0.6dB. LNA: 50-4000mhz. Can be used ... morefor high dynamic range receiver LNA application, and amplify small signal of 110dBM.
Buy It Now
Free Shipping Condition: New Location: China Attenuation: 10dB. Power: 50W. Frequency:DC to 3.0GHz(0-3.0GHz). Connector: N type. 1 xAttenuator.
Buy It Now
$3.72 Shipping Condition: Neu Location: China Specifications: Condition: 100% Brand New Voltage: 5V Current: 90mA Gain: 18dB@0.9G Input/Output Impedance: 50Ω Max. Output Power: P1db 22dBm(@2GHz) Input ... moreSignal: +10dBm, output is distorted) Bandwidth: 0.05-4GHZ(differs at different frequency, refers to S21 curve) Noise Factor: 0.6dB@0.9GHz Size: Approx. 6*2.4cm/2.36*0.94inch.
Buy It Now
$2.77 Shipping Condition: Neu Location: China Can be used for high dynamic range receiver LNA application, and amplify small signal of 110dBM. You can cascade several LNA modules in order to improve ... moregain. It has 0.6dB typical noise factor, 19dB typical gain, 23dB P1dB.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China "New 2.7GHZ Benchtop Frequency Counter. ( 220V and 110V AC Version ) ". Frequency / Period Count Functions. Range : 10Hz to 10MHz direct counter;. Resolution ... more: Direct counter : 1, 10, 100Hz switchable;.
Buy It Now
$40.00 Shipping Condition: New Location: Malaysia 2. CONDITION: USED WORKING Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$3.19 Shipping Condition: Neu Location: China Can be used for high dynamic range receiver LNA application, and amplify small signal of 110dBM. You can cascade several LNA modules in order to improve ... moregain. It has 0.6dB typical noise factor, 19dB typical gain, 23dB P1dB.
Buy It Now
$3.00 Shipping Condition: New Location: China The HMC1197LP7FE is Ideal for The HMC1197LP7FE is a low noise, high linearity Direct Quadrature Modulator with Fractional-N PLL&VCO RFIC. Auxiliary LO ... moreoutput (differential or single-ended), enables the HMC1197LP7FE to distribute identical frequency and.
Buy It Now
$2.54 Shipping Condition: Neu Location: China Can be used for high dynamic range receiver LNA application, and amplify small signal of 110dBM. You can cascade several LNA modules in order to improve ... moregain. 1 x LNA Low Noise Amplifier 50M~4Ghz. It has 0.6dB typical noise factor, 19dB typical gain, 23dB P1dB.
Buy It Now
$2.54 Shipping Condition: Neu Location: China Can be used for high dynamic range receiver LNA application, and amplify small signal of 110dBM. You can cascade several LNA modules in order to improve ... moregain. 1 x LNA Low Noise Amplifier 50M~4Ghz. It has 0.6dB typical noise factor, 19dB typical gain, 23dB P1dB.
Buy It Now
$43.74 Shipping Condition: Used Location: Farmingdale, United States Up for sale is a set including both an 8494H& an 8496H Programmable Step Attenuator. Totaling 121 dB of attenuation. The pictures show the actual ... moreunits. These are new. Never been used stock. They have been tested and I offer a 30 day warranty. No accessories included but if you need an accessory, just ask- I might have it. Key Features& Specifications- Superior RF Performance: Frequency range: dc to 18 GHz Insertion loss at 0 dB: 0.6 dB + 0.09 dB/GHz Maximum SWR: 1.5 Repeatability and Life Span: Repeatability life: 0.03 dB max 5 million cycles per section. Typical 5 million cycles per section Power Handling: Maximum RF input power: 1 W(average) 100 W(peak) Features: Connector type: Type-N female Programming connector: 12-pin Viking The Keysight 8494H& 8496H DC to 18 GHz programmable step attenuator set offers exceptional repeatability and reliability. Attenuation is provided in 1 dB steps from 0 to 121 dB. Precision gold-plated leaf springs ensure long-life(over 5 million cycles) and very high attenuator repeatability(typically 0.01 dB) To improve measurement accuracy. NIST traceable data(SWR and attenuation) is available as Option UK6. A maximum switching time of 20 ms(including contact settling) speeds automatic testing. Custom step attenuator/switch combinations are possible. The Keysight 11716A/B/C interconnect kits provide quick connection of Keysight 8494/5/6/7 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps.
Buy It Now
$2.77 Shipping Condition: Neu Location: China Can be used for high dynamic range receiver LNA application, and amplify small signal of 110dBM. You can cascade several LNA modules in order to improve ... moregain. It has 0.6dB typical noise factor, 19dB typical gain, 23dB P1dB.
Buy It Now
$2.77 Shipping Condition: Neu Location: China Can be used for high dynamic range receiver LNA application, and amplify small signal of 110dBM. You can cascade several LNA modules in order to improve ... moregain. It has 0.6dB typical noise factor, 19dB typical gain, 23dB P1dB.
Buy It Now
$2.54 Shipping Condition: Neu Location: China Can be used for high dynamic range receiver LNA application, and amplify small signal of 110dBM. You can cascade several LNA modules in order to improve ... moregain. It has 0.6dB typical noise factor, 19dB typical gain, 23dB P1dB.
Buy It Now
$37.00 Shipping Condition: Used Location: Israel Fully tested. Good working condition. Actual photos.
Buy It Now
$2.00 Shipping Condition: New Location: China Output current: 2400mA. Output power: 12W. Output precision: ±5%. Over current protection: 2450-2550mA. Due to the light and screen difference, the item's ... morecolor may be slightly different from the pictures.
Buy It Now
$2.54 Shipping Condition: Neu Location: China The low-power micro/motion sensing module is designed based on the X-band radar chip, and the center frequency is 1 0.525GHz. Working current: 16mA (Max, ... moreVCC=3.3~12.0V). When several built-in radar module components are fixed, the spacing between components shall be ≥ 0.5m;.
Buy It Now
$35.61 Shipping Condition: Used Location: Farmingdale, United States Precision gold-plated leaf springs ensure long life (over 5 million cycles) and very high attenuator repeatability (typically 0.01 dB). Custom step attenuator/switch ... morecombinations are possible. Frequency range: dc to 4 GHz.
Buy It Now
$2.70 Shipping Condition: New Location: China 5PCS USB 3.1 Type C Connector 16 Pins Female Socket Receptacle Adapter 2.54mm Connector Socket Solder- Wire & Cable PCB Board. 5x USB 3.1 Type-C Connector. ... more5PCS USB 3.1 Type-C Connector Female Test PCB Board Power Adapter 16P 2.54mm.
Buy It Now
Free Shipping Condition: New Location: China AC 250V 13A UK 3 Pins Electrical Power Rewireable Plug Male Wire Fused Socket Outlet Adaptor Extension Cord Cable Connector Plug. 23dBm DC 4.0GHz RF Fixed ... moreAttenuator Module Board SMA Double Female Head 0dB-30dB.
Buy It Now
$2.77 Shipping Condition: Neu Location: China Can be used for high dynamic range receiver LNA application, and amplify small signal of 110dBM. You can cascade several LNA modules in order to improve ... moregain. It has 0.6dB typical noise factor, 19dB typical gain, 23dB P1dB.
Buy It Now
$2.00 Shipping Condition: New Location: China External trigger input: Low pulse trigger, pulse width should be greater than 200ms. Point the self-locking relay "open", relay "close" 4 instructions. ... moreExternal trigger input, optical isolation switch, low pulse input.
Buy It Now
$2.00 Shipping Condition: New Location: China Output power: 220W. Short circuit protection: yes. Output current: 9-12A. Due to the light and screen difference, the item's color may be slightly different ... morefrom the pictures. DC 12V 4 Channel RS232 Relay Board PC USB UART DB9 Interface Relay Module 1.
Buy It Now
$96.66 Shipping Condition: New Location: San Gabriel, United States
Buy It Now
$37.00 Shipping Condition: Used Location: Israel HP 5086-7776 ATTENUATOR 70dB FOR 8592A FULLY TESTED. GOOD WORKING CONDITION. ACTUAL PHOTOS. Normal 0 false false false EN-US X-NONE HE MicrosoftInternetExplorer4 ... moreSHIP WITH EMS + TRACKING, LESS THEN 7 DAYS TO USA\ EUROPE. ISRAEL: NEED TO ADD 18% VAT TO PRICE. PAYPAL ONLY. THANK YOU. INV: R2M20B1 S1 S/N PATENTIX: P5000225
Buy It Now
$2.54 Shipping Condition: Neu Location: China The low-power micro/motion sensing module is designed based on the X-band radar chip, and the center frequency is 1 0.525GHz. Working current: 16mA (Max, ... moreVCC=3.3~12.0V). When several built-in radar module components are fixed, the spacing between components shall be ≥ 0.5m;.
Buy It Now
$2.54 Shipping Condition: Neu Location: China Can be used for high dynamic range receiver LNA application, and amplify small signal of 110dBM. You can cascade several LNA modules in order to improve ... moregain. It has 0.6dB typical noise factor, 19dB typical gain, 23dB P1dB.
Buy It Now
$74.69 Shipping Condition: Neu: Sonstige (siehe Artikelbeschreibung) Location: Auw, Burbach, Steffeln, Germany >7.5 GHz to 13.6 GHz ±2.0 dB. 9 kHz to 40 MHz ≤40 MHz8 ±1.0 dB 0.60 dB. >40 MHz to 4.0 GHz ≤20 MHz ±0.10 dB 0.08 dB 0.3°. >4 GHz to 7.5 GHz ≤20 MHz ±0.35 ... moredB 0.20 dB 0.7°. >7.5 GHz to 13.6 GHz ≤20 MHz ±0.35 dB 0.20 dB 0.7°.
Buy It Now
$2.00 Shipping Condition: New Location: China Output: 5V/12V optional, maximum 2A output. Do not pat if you mind. When wiring, the USB interface should not be loaded. With output short circuit protection ... morefunction. Non-isolated step-down module.
Buy It Now
$2.00 Shipping Condition: New Location: China DC 12V 4 Channel RS232 Relay Board PC USB UART DB9 Interface Relay Module 1. Output indication : relay output with LED indicators,easy to see working ... morestatus of the relay;. Power input: DC 12V(8.5-13.5V).
Buy It Now
$2.80 Shipping Condition: New Location: China Output accuracy: ±1%. DC 12V 4 Channel RS232 Relay Board PC USB UART DB9 Interface Relay Module 1. 1.35GHz-9.5GHz UWB Ultra Wideband Log Periodic Antenna ... more6-7dB 50W SMA-J Interface. Standby power:
Buy It Now
$2.00 Shipping Condition: New Location: China Under the MODBUS command ,the maximum delay is 255 seconds. Under the MODBUS command mode, it can support up to 32 devices in parallel. DC 12V RS485 Modbus ... moreRTU Relay Module PLC Digital Output Expansion Board x1.
Buy It Now
$2.00 Shipping Condition: New Location: China 2Pcs High Power Light Switch Classic White Inline ON/OFF Table Lamp Desk Light Cord Cable Switches Pure Copper Springboard Switch. This single pole on/off ... morein line cord switch is designed to replace an old broken switch or add a switch to a light or appliance that did not have one before.Anti slip on/off button.
Buy It Now
$2.00 Shipping Condition: New Location: China Output power: 70W. Short circuit protection: yes. Output current: 3-4.5A. Due to the light and screen difference, the item's color may be slightly different ... morefrom the pictures. DC 12V 4 Channel RS232 Relay Board PC USB UART DB9 Interface Relay Module 1.
Buy It Now
$2.00 Shipping Condition: New Location: China Your smart phone or tablet has connected to a 2.4g WiFi with internet. Checklist before using the device WEMOS D1 Mini V4.0.0 TYPE-C WIFI Internet of ... moreThings Develop Board Based ESP8266. DC 12V 4 Channel RS232 Relay Board PC USB UART DB9 Interface Relay Module 1.
Buy It Now
Free Shipping Condition: New Location: China L NRF24L01P+PA+LNA module is carefully designed with high-speed 2.4G wireless transceiver chip NRF24L01P. The correct operation is: CE=1 triggers the ... moretransmission, and only after the transmission is completed, CE=0 is set instead of CE=0 after 10us.
Buy It Now
Free Shipping Condition: New Location: China DC12V to AC220V Inverter Sine Wave Inverter Circuit Board 100W Drive Board 1. DC12V to AC180-220V Inverter Modified Wave Inverter Circuit Board Driver ... moreBoard. Input current: 6A Max. Due to the light and screen difference, the item's color may be slightly different from the pictures.
Buy It Now
$35.61 Shipping Condition: Used Location: Farmingdale, United States Model: 8496G. Precision gold-plated leaf springs ensure long life (over 5 million cycles) and very high attenuator repeatability (typically 0.01 dB). ... moreCustom step attenuator/switch combinations are possible.
Buy It Now
$2.54 Shipping Condition: Neu Location: China The low-power micro/motion sensing module is designed based on the X-band radar chip, and the center frequency is 1 0.525GHz. Working current: 16mA (Max, ... moreVCC=3.3~12.0V). When several built-in radar module components are fixed, the spacing between components shall be ≥ 0.5m;.
|
|
HP 8496B 18 GHz, 0 to 110 dB, 10 dB steps Manual Step Attenuator W/ OPT 001
YOU ARE BIDDING ON A HP 8496B 18 GHz. 0 to 110 dB, 10 dB steps Manual Step Attenuator W/ OPT 001 UNIT IT IS IN GOOD COSMETIC CONDITION UNIT WAS PULLED FROM A WORKING LAB/ NO FURTHER TESTING HAS BEEN DONE 14-DAY AGAINST D.O.A. CALIBRATION AVAILABLE FOR ADDITIONAL COST PLEASE ASK ALL QUESTION BEFORE PLACING YOUR BID*Please ask all questions before placing your bid* AUCTION TERMS( please read before placing your bid) International bidders. Please read Shipping& Handling section! Product Condition/ Warranty/Return· Most of our equipment is sold As-Is. Unless otherwise stated. Used or Refurbished. Most units powers up and passes self test, however no further testing has been done. Additional Calibration can be performed upon request. No documentation, software, or other collateral included. No return or exchange is acceptable. We are ... morenot responsible for Customs for items shipped overseas. Electronic Items labled"unit powers up" Should the unit fail to power up upon receipt. It may be sent back to us at the expense of the buyer to be tested by our staff. It will be at our discretion to issue a refund upon our findings. Payment: Money Order/Cashiers Checks. Bank to Bank Wire Transfer(for international bidders) PayPal( A Confirmed Address is required) PayPal accepts Visa. MasterCard, Discover, American Express, and eCheck. Failure to pay for your item within 5 days will result on cancellation of the transaction. Shipping and Handling: Item usually ships within 1-2 business days after the receipt of the payment. Shipping and Handling within United States: Unless specified. We charge a flat fee for each item being auctioned. We do not ship to P.O. Boxes or A.P.O. We use DHL and FedEx Ground Service. International bidders: please contact us with City. Postal Code and Country BEFORE BIDDING for S&H rate which could be expensive(the same applies to Hawaii and Alaska) We ship USPS once a week and only upon request. Unless specified from buyer. Insurance is not available. 8.25% tax adde
|
|
HP 33322H Programmable Step Attenuator 0-110 dB 10 dB Steps DC-18 GHz
Frequency Response DC- 18 GHz Insertion Loss.6 dB +.09 X F(Ghz) 2.22 dB@ 18 GHz Step Size 10 dB Mechanical Switch +24 V 1W CW RF Power Return Loss 14 dB Shipping Weight Option 002 The HP 33322H is a programmable step attenuator operating in the frequency range of DC-18 GHz. SMA connectors are used for the RF In/Out ports. Internal tee attenuators with the added mechanical switches provide a low loss. High reliability function. The step size is 10 dB. The steps are 10-20-40-40 dB for a total of 110 dB. The attenuator is functional but is being sold AS IS. Shipping is to 50 states only via USPS. Free Shipping Payment is by PayPal or Bill Me Later. Credit cards should be processed through PayPal. Payment is expected within 3 days or the item will be relisted.
|
|
Agilent 8496B Manual Step Attenuator, DC to 18 GHz, 0 to 110 dB, 10 dB steps
Agilent 8496B Manual Step Attenuator DC to 18 GHz 0 to 110 dB 10 dB steps Good Used Condition. I took some of the paint off when I was cleaning please see the picture. Frequency range: dc to 18 GHz. If your not happy with your item return it and I will refund. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-143593265df-0xf8-
|
|
Agilent 8496A Manual Step Attenuator, DC to 4 GHz, 0 to 110 dB, 10 dB steps
Agilent 8496A Manual Step Attenuator Superior RF Performance ◆ Frequency range: dc to 4 GHz ◆ Insertion loss at 0 dB: 0.6 dB + 0.09 dB/GHz ◆ Maximum SWR: 1.5 Repeatability and Life Span ◆ Repeatability life: 0.03 dB max 5 million cycles per section. Typical ◆ 5 million cycles per section, Power handling ◆ Maximum RF input power: 1 W(average) 100 W(peak) Tested and Working! ■, Warranty: This item is being sold with 30 days of warranty from us. ■, Shipping: Shipping will be done using EMS-KOREA. If you would like to get your item faster. Please contact us shipping service and we will provide you with a shipping quote. Shipments will be made by EMS with tracking numbers. ■, Attention: Due to sale policy. All international shipment must include a telephone number. Buyer is responsible for all custom fees and/or import taxes. ■, Payment Paypal: ... moreWe accept Paypal only. Payments made using PayPal is shipped to PayPal confirmed address only ■, Contact info: Please feel free to contact us at anytime with any questions or concerns regarding our items. Thank you! Have a good day!
|
|
Agilent 8496H - Programmable Step Attenuator, DC to 18 GHz, 0 to 110 dB, 10 dB s
Agilent 8496H- Programmable Step Attenuator. DC to 18 GHz, 0 to 110 dB, 10 dB steps The Agilent 8496H dc to 18 GHz programmable step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 10 dB steps from 0 to 110 dB. Precision gold-plated leaf springs ensure long life(over 5 million cycles) and very high attenuator repeatability(typically 0.01 dB) To improve measurement accuracy. NIST traceable data(SWR and attenuation) is available as Option UK6. A maximum switching time of 20 ms(including contact settling) speeds automatic testing. Custom step attenuator/switch combinations are possible. The Agilent 11716A/B/C interconnect kits provide quick connection of Agilent 8494/5/6/7 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps. Frequency range: dc to 18 GHz, Insertion loss ... moreat 0 dB: 0.6 dB + 0.09 dB/GHz, Maximum SWR: 1.5 to 8 GHz. 1.6 to 12.4 GHz, 1.9 to 18 GHz, Repeatability life: 0.03 dB max 5 million cycles per section. Typical, 5 million cycles per section, Maximum RF input power: 1 W(average) 100 W(peak) Connector type: choice of type-N female. SMA female, APC-7, Programming connector: 12-pin Viking. Optional 14-pin DIP, Options Installed: 001- Type N(f) connectors, Available Documents: All orders shipped in Instapak Foam-Fitted packaging material. Our technicians repair and calibrate most manners and makes of electronic test and measurement equipment. Power Sensor Repair, RF Microwave Repair, Automated Calibrations, Component Level Repair, NIST Traceable Calibrations, Our technicians repair obsolete equipment from Agilent(HP) Fluke, Tektronix, and more. We offer discounts of up to 70% or more on manufacturers list pricing on reconditioned test and measurement equipment from Agilent(HP) Tektronix, Fluke, Rhode& Schwarz, and many more. Personal or Company Check(will delay shipment until check clears) Certified Funds(Sameday shipment) PayPal ~ Online Payment Option Shipping charges are added to final bid price. Will ship Inter
|
|
Agilent 8495B 002 Manual Step Attenuator, DC to 18 GHz, 0 to 110 dB, 10 dB steps
Agilent 8495B Manual Step Attenuator DC to 18 GHz 0 to 110 dB 10 dB steps Good Used Condition. Has slight scratch on back it does not show up in the pictures very well but it is there, please see the picture. Option 001 N Type Female Connectors. If your not happy with your item return it and I will refund.
|
|
HP 8496B Manual Step Attenuator, DC to 18 GHz, 0 to 110 dB, 10 dB steps
HP 8496B Manual Step Attenuator DC to 18 GHz. 0 to 110 dB, 10 dB steps Very good condition and guaranteed to work. Base included. Operating Manual can be found on-line Key Features& Specifications Superior RF Performance Frequency range: dc to 18 GHz Insertion loss at 0 dB: 0.6 dB + 0.09 dB/GHz Maximum SWR: 1.5 to 8 GHz. 1.6 to 12.4 GHz, 1.9 to 18 GHz Repeatability and Life Span Repeatability life: 0.03 dB max 5 million cycles per section. Typical 5 million cycles per section Power handling Maximum RF input power: 1 W(average) 100 W(peak) 800x600 Please see our great feedback and buy with confidence. Also. Please take a look at our other listings and store for more great deals on test equipment. We are Trading Assistants- Ask us how we can help you sell your items! Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
|
|
Agilent/HP8496G Programmable Step Attenuator, DC to 4 GHz, 0 to 110 dB, 10 dB st
You are bidding on one each AT 8496G/002. Unit in nice shape. Good luck!
|
|
HP 8496G Programmable Step Attenuator, DC to 4 GHz, 0 to 110 dB, 10 dB steps
Used but good condition. Satisfaction Guaranteed. 7-day warranty Included. Calibration available upon request at additional charge. For International sales. Please contact us for a shipping quote. Description The Agilent 8496G dc to 4 GHz programmable step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 10 dB steps from 0 to 110 dB. Precision gold-plated leaf springs ensure long life(over 5 million cycles) and very high attenuator repeatability(typically 0.01 dB) To improve measurement accuracy. NIST traceable data(SWR and attenuation) is available as Option UK6. A maximum switching time of 20 ms(including contact settling) speeds automatic testing. Custom step attenuator/switch combinations are possible. The Agilent 11716A/B/C interconnect kits provide quick connection of Agilent 8494/5/6/7 1 dB and ... more10 dB step attenuators in series for greater dynamic range with 1 dB steps. 8496G-001 Type N female connectors Specifications Frequency range: dc to 4 GHz, Insertion loss at 0 dB: 0.6 dB + 0.09 dB/GHz, Maximum SWR: 1.5, Repeatability life: 0.03 dB max 5 million cycles per section. Typical, Maximum RF input power: 1 W(average) 100 W(peak) Connector type: choice of type-N female. SMA female, APC-7, Programming connector: 12-pin Viking. Optional 14-pin DIP, a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-146abc5577b-0x110-
|
|
Agilent / HP 8496A Step Attenuator: DC - 4 GHz, 0 - 110 dB in 10 dB Steps + 001
WHAT IS IT? This listing is for(1) used Agilent/ HP 8496A Step Attenuator: DC- 4 GHz. 0- 110 dB in 10 dB Steps + Option 001. This sale includes shown components ONLY. No other unseen parts or accessories will be included. DOES IT WORK? Yes. This item has been tested and it is working properly. However. This does not imply that it has been recently serviced, refurbished, or calibrated; meaning additional adjustments or minor repairs may be required and should be expected. HOW’S IT LOOK? Good. No major cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? Yes. But returns will only be accepted if the item shows up Dead on Arrival(DOA) It is damaged during shipment, or you receive the wrong item all together(buyer protection) Your Right of Return(ROR) is valid for 14 days after initial receipt of the item and does not cover buyer’s remorse. ... moreSorry. Domestic coverage only. Returns will not be accepted for orders placed or shipped outside of the United States. Please read the terms below for more information on our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter!
|
|
Agilent / HP 8496G Attenuator, Programmable, DC - 4 GHz, 0 - 110 dB, 10 dB Steps
AGILENT 8496G ATTENUATOR + OPT 002 DESCRIPTION The Agilent 8496G dc to 4 GHz programmable step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 10 dB steps from 0 to 110 dB. Precision gold-plated leaf springs ensure long life(over 5 million cycles) and very high attenuator repeatability(typically 0.01 dB) To improve measurement accuracy. NIST traceable data(SWR and attenuation) is available as Option UK6. A maximum switching time of 20 ms(including contact settling) speeds automatic testing. Custom step attenuator/switch combinations are possible. The Agilent 11716A/B/C interconnect kits provide quick connection of Agilent 8494/5/6/7 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps. Notes/ Included Options: 002- SMA(f) Connectors, All of our equipment has been tested. ... moreAdditional Calibration may be available upon request! ~ Items sold with shown accessories. A power cord and manual on CD(when available) ~ PAYMENT AND SHIPPING INFO Warranty Info& Return Policy All goods or equipment sold by AxiomTest include a 30-Day Domestic Warranty. Warranty period starts the day the equipment is shipped. AxiomTest will at its discretion. Repair, replace, or refund the selling price for any malfunctioning equipment or goods, provided payment is made in due course, except in cases of improper application or misuse of goods or equipment by Customer. Shipping costs are not refundable. All goods or equipment sold by AxiomTest are subject to a limited 5-day Domestic ROR(Right of Return) unless otherwise noted. This ROR is limited to goods found to be non-acceptable due to cosmetic defect(not previously disclosed) or item not meeting manufacturer's spec as advertised. ROR does not apply to wrong item(s) ordered by customer. All items past the 5-day ROR period will be accepted only under written acceptance by AxiomTest. Customer agrees to pay all return shipping costs for any returned item. Items that are damaged in shipping are not covered under
|
|
HP 8496B 18 GHz, 0 to 110 dB, 10 dB steps Manual Step AttenuatorOP 002 SMA(F)
ELECTROLAB INC. 10121#A IMPERIAL AVE. CUPERTINO. CA 95014 U.S.A. TEL: 408-257-2445 FAX: 408-257-6310 elctrolb@electrolab.com Sale. Leasing& Buy Test Equipment HP 8496B 18 GHz. 0 to 110 dB, 10 dB steps Manual Step Attenuator w/ SMA(f) Connectors. Tested and good condition. This item also includes a CD Copy of User Manuals NOTE TO BUYER: Price is for FOB. Buyer pays for all Shipping and Handling costs. For International Buyers. Buyer is responsible for all customs and duties. For California Buyers. Buyer pays state tax. If you are interested in the items. Provide us your shipping address, we will gladly quote for shipping and handling costs for you. After Buyer agreed to purchase the items. We will provide the buyer an e-mail with payment information along with total costs within 2 business days. All orders will be scheduled to ship within ... more3 business days AFTER payment has been confirmed. All items are professionally packed to arrive undamaged. We are not providing shipping insurance. If you wish to pay the insurance, please contact us. UPS is our standard shipping carrier worldwide. If you wish to use another carrier such as United States Postal Service we will try to accommodate you however this requires extra handling on our part and we have to charge a $10 service charge for this. For international orders please be aware that there are size restrictions that may make it impossible to ship via mail. Our hours of operation are M-F. 10-5PM Pacific Standard Time. Phone: 408) 257-2445 Fax: 408) 257-6310
|
|
|